Prep release 4.5.0

Added LED modes for ROG Flow X16

See merge request asus-linux/asusctl!134

.gitignore

@@ -1,2 +1,8 @@
 /target
-vendor.tar.xz
+vendor.tar.xz
+cargo-config
+.idea
+vendor-*
+vendor_*
+.vscode-ctags
+.vscode

.gitlab-ci.yml

@@ -0,0 +1,29 @@
+image: rust:latest
+
+before_script:
+  - apt-get update -qq && apt-get install -y -qq libdbus-1-dev libclang-dev libudev-dev libfontconfig1-dev
+
+stages:
+    - test
+    - build
+
+test:
+  script:
+    - rustup component add clippy
+    - cargo check
+    - cargo clippy
+    - cargo test
+
+build:
+  only:
+    - main
+  script:
+    - make && make vendor
+  artifacts:
+    paths:
+    - vendor_asus-nb-ctrl_*.tar.xz
+    - cargo-config
+
+variables:
+  GIT_SUBMODULE_STRATEGY: normal
+

CHANGELOG.md

@@ -4,9 +4,515 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## [Unreleased]
+## [Unreleased - 4.5.0]
+### Added
+- intofy watches on:
+  - `charge_control_end_threshold`
+  - `panel_od`
+  - `gpu_mux_mode`
+  - `platform_profile`
+  - keyboard brightness
+  - These allow for updating any associated config and sending dbus notifications.
+- New dbus methods
+  - `DgpuDisable`
+  - `SetDgpuDisable`
+  - `NotifyDgpuDisable`
+  - `EgpuEnable`
+  - `SetEgpuEnable`
+  - `NotifyEgpuEnable`
+  - `MainsOnline` (This is AC, check if plugged in or not)
+  - `NotifyMainsOnline`
+- `nvidia-powerd.service` will now enable or disable depending on the AC power state
+  and on resume/boot (hybrid boot). It has been proven that this nvidia daemon can be
+  problematic when on battery, not allowing the dgpu to suspend within decent time and
+  sometimes blocking it completely.
+- Notification to rog-control-center of dGPU state change
+### Changed
+- Use loops to ensure that mutex is gained for LED changes.
+- asusctl now uses tokio for async runtime. This helps simplify some code.
+- Properly fix notifs used in rog-control-center
+### Breaking
+- DBUS: all charge control methods renamed to:
+  - `ChargeControlEndThreshold`
+  - `SetChargeControlEndThreshold`
+  - `NotifyChargeControlEndThreshold`
+- DBUS: all panel overdrive methods renamed to:
+  - `PanelOd` (from PanelOverdrive)
+  - `SetPanelOd`
+  - `NotifyPanelOd`
+  - Path `/org/asuslinux/Charge` changed to `/org/asuslinux/Power`
+
+## [v4.4.0] - 2022-08-29
+### Added
+- Support for per-key config has been added to `asusd-user`. At the moment it is
+  basic with only a few effects done. Please see the manual for more information.
+- Support for unzoned and  per-zone effects on some laptops. As above.
+- Added three effects to use with Zoned or Per-Key:
+  + Static, Breathe, Flicker. More to come.
+- Support for G713RS LED modes
+- Support for TUF laptop RGB (kernel patches required, these are submitted upstream)
+### Changed
+- Create new rog-platform crate to manage all i/o in a universal way
+  + kbd-led handling (requires kernel patches, TUF specific)
+  + platform handling (asus-nb-wmi)
+  + power (basic, can be extended in future)
+  + hidraw
+  + usbraw
+- Refactor how ROGCC handles IPC for background open, run-in-bg
+- Refactor daemon task creation to be simpler (for development)
+- Rename dpu_only to gpu_mux. Update all related messages and info.
+### Breaking
+- DBUS: rename path `/org/asuslinux/RogBios` to `/org/asuslinux/Platform`
+- DBUS: renamed `dedicated_graphic_mode` to `gpu_mux_mode` (`GpuMuxMode`)
+- DBUS: renamed `set_dedicated_graphic_mode` to `set_gpu_mux_mode` (`SetGpuMuxMode`)
+  + The methods above take an enum: 0 = Discrete, 1 = Optimus
+
+## [4.3.4] - 2022-08-03
+### Bugfix
+- ROGCC: Remove power setting from correct array
+
+## [4.3.3] - 2022-08-02
+### Added
+- `rog-control-center` has now been moved in to the main workspace due to
+  the heavy dependencies on most of the rog crates
+- Preliminary support of TUF RGB keyboards + power states
+- Support for G713RW LED modes (Author: jarvis2709)
+- Support for G713IC LED modes
+### Changed
+- The udev rules have been changed to make asusd load with all gamer variants when asus-nb-wmi is loaded
+  - TUF, ROG, Zephyrus, Strix
+
+## [4.3.0] - 2022-07-21
+### Added
+- Clear command for anime `asusctl anime --clear` will clear the display
+- Re-added support for LED power states on `0x1866` type keyboards
+### Changed
+- Make rog-anime more error tolerent. Remove various asserts and return errors instead
+- Return error if a pixel-gif is larger than the anime-display dimensions
+- Both Anime and Aura dbus interfaces are changed a little
+  - Aura power has changed, all power related settings are now in one method
+  - Anime methods will now return an error (if errored)
+  - /org/asuslinux/Led renamed to /org/asuslinux/Aura
+
+## [4.2.1] - 2022-07-18
+### Added
+- Add panel overdrive support (autodetects if supported)
+- Add detection of dgpu_disable and egpu_enable for diagnostic
+### Changed
+- Fixed save and restore of multizone LED settings
+- Create defaults for multizone
+
+## [4.2.0] - 2022-07-16
+### Added
+- Support for GA402 Anime Matrix display (Author: I-Al-Istannen & Luke Jones)
+- Support for power-config of all LED zones. See `asusctrl led-power --help` (Author: Luke Jones, With much help from: @MNS26)
+- Full support for multizone LED <logo, keyboard, lightbar> (Author: Luke Jones, With much help from: @MNS26)
+- Add ability to load extra data from `/etc/asusd/asusd-user-ledmodes.toml` for LED support if file exits
+- Support for G513IM LED modes
+- Support for GX703HS LED modes
+### Changed
+- Dbus interface for Aura config has been changed, all power control is done with `SetLedsEnabled` and `SetLedsDisabled`
+- Data for anime-matrix now requires passing the laptop model as enum
+- Extra unit tests for anime stuff to help verify things
+
+### Added
+- Support for GA503R LED modes
+### Changed
+- Refactor LED and AniMe tasks
+- Reload keyboard brightness on resume from sleep/hiber
+
+## [4.1.1] - 2022-06-21
+### Changed
+- Fixes to anime matrix system thread cancelation
+
+## [4.1.0] - 2022-06-20
+### Changed
+- Huge refactor to use zbus 2.2 + zvariant 3.0 in system-daemon.
+- Daemons with tasks now use `smol` for async ops.
+- Fixes to fan-curve settings from CLI (Author: Armas Span)
+- Add brightness to anime zbus notification
+- Adjust how threads in AniMe matrix controller work
+- Use proper power-state packet for keyboard LED's (Author: Martin Piffault)
+### Added
+- Support for GA402R LED modes
+- Support for GU502LV LED modes
+- Support for G512 LED modes
+- Support for G513IC LED modes (Author: dada513)
+- Support for G513QM LED modes (Author: Martin Piffault)
+- Add side-LED toggle support (Author: Martin Piffault)
+- Support reloading keyboard mode on wake (from sleep/hiber)
+- Support reloading charge-level on wake (from sleep/hiber)
+- Support running AniMe animation blocks on wake/sleep and boot/shutdown events
+
+# [4.0.7] - 2021-12-19
+### Changed
+- Fix incorrect power-profile validation
+- Update asusd-ledmodes.toml to support Asus Rog Strix G15 G513QE (@LordVicky)
+- Update patch notes and links
+
+# [4.0.6] - 2021-11-01
+### Changed
+- Fix CLI for bios toggles
+### Added
+- Extra commands for AniMe: pixel-image, gif, pixel-gif
+
+# [4.0.5] - 2021-10-27
+### Changed
+- Convert fan curve percentage to 0-255 expected by kernel driver only if '%' char is used, otherwise the expected range for fan power is 0-255
+- Use correct error in daemon for invalid charging limit
+- Enforce charging limit values in range 20-100
+### Added
+- LED modes for G513QR
+
+# [4.0.4] - 2021-10-02
+### Changed
+- Add missing Profile commands
+- Spawn tasks on individual threads to prevent blocking
+- Don't force fan-curve default on reload
+- Begin obsoleting the graphics switch command in favour of supergfxctl
+- Slim down the notification daemon to pure ASUS notifications
+
+# [4.0.3] - 2021-09-16
+### Changed
+- Don't show fan-curve warning if fan-curve available
+- Add G713QR to Strix led-modes
+- Fix part of CLI fan-curve control
+
+# [4.0.2] - 2021-09-14
+### Changed
+- Backup old configs to *-old if parse fails
+- Prevent some types of crashes related to unpatched kernels
+- Add better help for graphics errors
+- Add better help for asusctl general errors
+- Implement fan-curve dbus API
+- Implement partial fan-curve control via CLI tool
+  + Set fan curve for profile + fan gpu/cpu
+
+# [4.0.1] - 2021-09-11
+### Changed
+- Fix asusd-ledmodes.toml
+
+# [4.0.0] - 2021-09-10
+### Added
+- AniMe:
+  + Support 8bit RGB, RGBA, 16bit Greyscalw, RGB, RGBA
+  + add `AsusImage` type for slanted-template pixel-perfect images
+  + `BREAKING:` plain `Image` with time period is changed and old anime configs break as a result (sorry)
+- LED:
+  + By popular request LED prev/next cycle is added
+  + Add led modes for GX551Q
+### BREAKING CHANGES
+- Graphics control:
+  + graphics control is pulled out of asusd and moved to new package; https://gitlab.com/asus-linux/supergfxctl
+- Proflies:
+  + profiles now depend on power-profile-daemon plus kernel patches for support of platform_profile
+    - if your system supports fan-curves you will also require upcoming kernel patches for this
+  + profiles are now moved to a new file
+  + fan-curves are only partially completed due to this release needing to be done sooner
+
+# [3.7.2] - 2021-08-02
+### Added
+- Enable multizone support on Strix 513IH
+- Add G513QY ledmodes
+### Changed
+- Fix missing CLI command help for some supported options
+- Fix incorrectly selecting profile by name, where the active profile was being copied to the selected profile
+- Add `asusd` version back to `asusctl -v` report
+- Fix various clippy warnings
+
+# [3.7.1] - 2021-06-11
+### Changed
+- Refine graphics mode switching:
+  + Disallow switching to compute or vfio mode unless existing mode is "Integrated"
+
+# [3.7.0] - 2021-06-06
+### Changed
+- Set PM to auto for Nvidia always
+- Extra info output for gfx dev scan
+- Extra info in log for G-Sync to help prevent user confusion around gfx switching
+- Add GA503Q led modes
+- Added ability to fade in/out gifs and images for anime. This does break anime configs. See manual for details.
+- Added task to CtrlLed to set the keyboard LED brightness on wake from suspend
+  + requires a kernel patch which will be upstreamed and in fedora rog kernel
+- Make gfx change from nvidia to vfio/compute also force-change to integrated _then_
+  to requested mode
+- Fix invalid gfx status when switching from some modes
+- Fix copy over of serde skipped config values on config reload
+
+# [3.6.1] - 2021-05-25
+### Changed
+- Bugfix: write correct fan modes for profiles
+- Bugfix: apply created profiles
+
+# [3.6.1] - 2021-05-25
+### Changed
+- Bugfix for cycling through profiles
+
+# [3.6.0] - 2021-05-24
+### Changed
+- Add GX550L led modes
+- Don't save compute/vfio modes. Option in config for this is removed.
+- Store a temporary non-serialised option in config for if compute/vfio is active
+  for informational purposes only (will not apply on boot)
+- Save state for LEDs enabled + sleep animation enabled
+- Save state for AnimMe enabled + boot animation enabled
+- Add extra config options and dbus methods
+- Add power state signals for anime and led
+- Refactor to use channels for dbus signal handler send/recv
+- Split out profiles independant parts to a rog-profiles crate
+- Cleanup dependencies
+- Fix some dbus Supported issues
+
+# [3.5.2] - 2021-05-15
+### Changed
+- Bugfix: prevent the hang on compute/integrated mode change
+
+# [3.5.1] - 2021-04-25
+### Changed
++ Anime:
+  - Fix using multiple configs
+
+# [3.5.0] - 2021-04-25
+### Changed
++ Keyboard:
+  - Split out all aura functionality that isn't dependent on the daemon in to a
+    new crate `rog-aura` (incomplete)
+  - Keyboard LED control now includes:
+    + Enable/disable LED's while laptop is awake
+    + Enable/disable LED animation while laptop is suspended and AC plugged in
+  - Properly reload the last used keyboard mode on boot
++ Graphics:
+  - Correctly enable compute mode for nvidia plus no-reboot or logout if switching
+    from vfio/integrated/compute.
+  - Add asusd config option to not save compute/vfio mode switch.
++ Anime:
+  - Enable basic multiple user anime configs (asusd-user must still be restarted)
++ Profiles:
+  - Enable dbus methods for freq min/max, fan curve, fan preset, CPU turbo enable.
+    These options will apply to the active profile if no profile name is specified.
+
+# [3.4.1] - 2021-04-11
+### Changed
+- Fix anime init sequence
+
+# [3.4.0] - 2021-04-11
+### Changed
+- Revert zbus to 1.9.1
+- Use enum to show power states, and catch missing pci path for nvidia.
+- Partial user-daemon for anime/per-key done, `asusd-user`. Includes asusd-user systemd unit.
+- user-daemon provides dbus emthods to insert anime actions, remove from index, set leds on/off
+  + Config file is stored in `~/.config/rog/rog-user.cfg`
+- AniMe display parts split out to individual crate in preparation for publishing
+  on crates.io
+
+# [3.3.0] - 2021-04-3
+### Changed
+- Add ledmodes for G733QS
+- Add ledmodes for GA401Q
+- Default to vfio disabled in configuration. Will now hard-error if enabled and
+  the kernel modules are builtin. To enable vfio switching `"gfx_vfio_enable": false,`
+  must be changed to `true` in `/etc/asusd/asusd.conf`
+
+# [3.2.4] - 2021-03-24
+### Changed
+- Ignore vfio-builtin error if switching to integrated
+
+# [3.2.3] - 2021-03-24
+### Changed
+- Better handling of session tracking
+### Added
+- List all profile data
+- Get active profile name
+- Get active profile data
+
+# [3.2.2] - 2021-03-23
+### Changed
+- Fix brightness control, again, for non-RGB keyboards
+
+# [3.2.1] - 2021-03-21
+### Changed
+- Fix brightness control
+- Large cleanup of code relating to LED controls
+
+# [3.2.0] - 2021-03-21
+### Changed
+- Refactor keyboard LED handling
+- Added --list for profiles (Thanks @aqez)
+- Added --remove for profiles (Thanks @aqez)
+- Added a graphics mode: vfio. This attaches Nvidia devices to vfio module.
+### Broken
+- Per-key LED modes, which need thinking about how to go ahead with for future
+
+# [3.1.7] - 2021-03-11
+### Changed
+- Refactor many parts of daemon
+- Switch out session monitoring to logind-zbus
+
+# [3.1.6] - 2021-03-11
+### Changed
+- Graphics switching will now wait until all users logged out before switching
+
+### Changed
+- Further tweaks to gfx switching
+- More logging on gfx switching
+- Filter bios help according to supported modes
+- Prevent gfx mode switching if in dedicated/G-Sync mode
+
+# [3.1.4] - 2021-03-10
+### Changed
+- Notify through dbus if user changes profile manually
+- Better help on CLI, show help only for supported items
+- Bugfix to gfx switcher
+
+# [3.1.3] - 2021-03-10
+### Changed
+- Hotfix: gracefully handle removing modules in use caused by display-manager not
+  fully shutdown at the time of trying to remove modules. It will now retry every
+  250ms per module
+
+# [3.1.2] - 2021-03-10
+### Changed
+- Test and create /etc/X11/xorg.conf.d/ if it doesn't exist
+- Hotfix to better report module issues
+
+# [3.1.1] - 2021-03-10
+### Changed
+- Add missing nvidia module nvidia_uvm to gfx ctrl list
+
+# [3.1.0] - 2021-03-09
+### Added
+- GU502LU led-modes
+### Changed
+- Graphics switching is now rebootless, the daemon will now restart the
+  display-manager to switch modes instead. Caveats are:
+  + There is no confirmation from the daemon, the program issuing the command
+    must confirm the request.
+  + systemd only
+- Laptops with dedicated Nvidia mode:
+  + You still must reboot for the bios to switch modes
+  + On boot if dedicated mode is active then asusd will update the required configs
+    to put display-manager in nvidia mode
+
+# [3.0.0] - 2021-02-22
+### Added
+- G531GD led modes
+
+# [3.0.0] - 2021-02-14
+### Changed
+- Write set+apply after each array in multizone
+- Remove misc bad logic
+- Use same code path as 0x1866 device to configure led support for 0x1854 device
+- Remove duplicate code
+- Set correct speeds for multizone
+- Remove dbus crate in favour of zbus. This removes the external dbus lib requirement.
+- Huge internal refactor
+- BREAKING CHANGE: Anime code refactor. DBUS method names have changed
+- Cleanup fan and cpu control + configs
+
+# [2.2.2] - 2021-01-31
+### Changed
+- Fix for dedicated gfx capable laptops in integrated mode
+- Fix for 0x1854 device
+
+# [2.2.1] - 2021-01-27
+### Added
+- Add ROG Zephyrus M15 LED config
+### Changed
+- Bugfixes
+- Fix reboot/restartx status for GFX switching
+- Update readme
+- Change CLI arg tag for fan modes
+- Make dracut include the nvidia modules in initramfs
+
+# [2.2.0] - 2021-01-26
+### Added
+- Dbus command to fetch all supported functions of the laptop. That is, all the
+  functions that asusd supports for the currently running laptop.
+- Bios setting toggles for:
+  + Dedicated gfx toggle (support depends on the laptop)
+  + Bios boot POST sound toggle
+### Changed
+- added config option for dedicated gfx mode on laptops with it to enable
+  switching directly to dedicated using `asusctl graphics -m nvidia`
+
+# [2.1.2] - 2021-01-10
+### Changed
+- Adjust gfx controller to assume that the graphics driver is loaded if the
+  mode is set for nvidia/hybrid
+
+# [2.1.1] - 2021-01-09
+### Changed
+- Updates to dependencies
+
+# [2.1.0] - 2020-10-25
+### Added
+- Option to turn off AniMe display (@asere)
+### Changed
+- Change option -k to show current LED bright (@asere)
+- Correctly disable GFX control via config
+- Panic and exit if config can't be parsed
+- Add DBUS method to toggle to next fan/thermal profile
+- Add DBUS method to toggle to next/prev Aura mode
+
+# [2.0.5] - 2020-09-29
+### Changed
+- Bugfixes
+
+# [2.0.4] - 2020-09-24
+### Changed
+- Better and more verbose error handling and logging in many places.
+- Fix timeout for client waiting on reply for graphics switching
+
+# [2.0.2] - 2020-09-21
+### Changed
+- graphics options via CLI are now a command block:
+  + `asusctl graphics`
+  + -m Mode <nvidia, hybrid, compute, integrated>
+  + -g Get current mode
+  + -f Force reboot or restart display manager without confirmation
+
+# [2.0.0] - 2020-09-21
+### Changed
+- Code refactor to spawn less tasks. Main loop will run only as fast as
+  it receives events
+- No-longer using tokio or async, reducing resource use
+### Added
+- A basic user daemon has been added for user notifications over dbus (XDG spec)
+- Added a user systemd service for notifications (asus-notify)
+- Graphics mode handling <iGPU only, dGPU only, or hybrid>, see asusctl --help
+### BREAKING CHANGES
+- asusd.conf has changed slightly and will overwrite old configs
+- All DBUS methods/signals/paths etc, are all updated and changed
+
+# [1.1.2] - 2020-09-10
+### Changed
+- Bump rog-fan-curve to new versiont o support GA401IV
+
+# [1.1.1] - 2020-09-10
+### Changed
+- Correction to AMD turbo setting
+
+# [1.1.0] - 2020-09-10
+### Changed
+- Uses string instead of debug print for some errors
+- Add interface num arg for LED controller (should help support
+    older laptops better)
+- Some slightly better error messages
+- Fix an idiotic mistake in `for i in 0..2.. if i > 0` -_-
+- Remove "unsupported" warning on laptop ctrl
+- Silence warning about AniMe not existing
+- Adjust the turbo-toggle CLI arg
+- Version bump for new release with fancurves
+
+## [1.0.2] - 2020-08-13
+### Changed
+- Bugfixes to led brightness watcher
+- Bufixes to await/async tasks
+
 ## [1.0.1] - 2020-08-13
+
 - Fix small deadlock with awaits
 
 ## [1.0.0] - 2020-08-13
+
 - Major fork and refactor to use asus-hid patch for ASUS N-Key device

Cargo.toml

@@ -1,16 +1,56 @@
 [workspace]
-members = ["asus-nb-ctrl", "asus-nb"]
+members = ["asusctl", "daemon", "daemon-user", "rog-platform", "rog-dbus", "rog-anime", "rog-aura", "rog-profiles", "rog-control-center"]
+
+[workspace.package]
+version = "4.5.0"
+
+[workspace.dependencies]
+async-trait = "^0.1"
+tokio = { version = "^1.21.2", features = ["macros", "rt-multi-thread", "time"]}
+concat-idents = "^1.1"
+dirs = "^4.0"
+smol = "^1.2"
+
+zbus = "^3.4"
+zbus_macros = "^3.4"
+zvariant = "^3.7"
+zvariant_derive = "^3.7"
+logind-zbus = { version = "^3.0" } #, default-features = false, features = ["non_blocking"] }
+
+serde = "^1.0"
+serde_derive = "^1.0"
+serde_json = "^1.0"
+toml = "^0.5.9"
+
+log = "^0.4"
+env_logger = "^0.9"
+
+glam = { version = "^0.22", features = ["serde"] }
+gumdrop = "^0.8"
+udev = "^0.6"
+rusb = "^0.9"
+sysfs-class = "^0.1.2"
+inotify = "^0.10.0"
+
+png_pong = "^0.8"
+pix = "^0.13"
+tinybmp = "^0.3"
+gif = "^0.11"
+
+notify-rust = { git = "https://github.com/flukejones/notify-rust.git", default-features = false, features = ["z"] }
 
 [profile.release]
-lto = true
+# thin = 57s, asusd = 9.0M
+# fat = 72s, asusd = 6.4M
+lto = "fat"
 debug = false
 opt-level = 3
 panic = "abort"
 
 [profile.dev]
-debug = false
+debug = true
 opt-level = 1
 
 [profile.bench]
 debug = false
-opt-level = 3
+opt-level = 3

MANUAL.md

@@ -0,0 +1,454 @@
+# asusctrl manual
+
+`asusd` is a utility for Linux to control many aspects of various ASUS laptops
+but can also be used with non-asus laptops with reduced features.
+
+## Programs Available
+
+- `asusd`: The main system daemon. It is autostarted by a udev rule and systemd unit.
+- `asusd-user`: The user level daemon. Currently will run an anime sequence, with RGB keyboard sequences soon.
+- `asusctl`: The CLI for interacting with the system daemon
+- `asus-notify`: A notification daemon with a user systemd unit that can be enabled.
+
+## `asusd`
+
+`asusd` is the main system-level daemon which will control/load/save various settings in a safe way for the user, along with exposing a *safe* dbus interface for these interactions. This section covers only the daemon plus the various configuration file options.
+
+The functionality that `asusd` exposes is:
+
+- anime control
+- led keyboard control (aura)
+- charge limiting
+- bios/efivar control
+- power profile switching
+- fan curves (if supported, this is auto-detected)
+
+each of these will be detailed in sections.
+
+### AniMe control
+
+Controller for the fancy AniMe matrix display on the lid of some machines. This controller is a work in progress.
+
+#### Config options
+
+If you have an AniMe device a few system-level config options are enabled for you in `/etc/asusd/anime.conf`;
+
+1. `"system": [],`: currently unused, is intended to be a default continuous sequence in future versions
+2. `"boot": [],`: a sequence that plays on system boot (when asusd is loaded)
+3. `"wake": [],`: a sequence that plays when waking from suspend
+4. `"shutdown": [],`: a sequence that plays when shutdown begins
+5. `"brightness": <FLOAT>`: global brightness control, where `<FLOAT> is 0.0-1.0
+
+Some default examples are provided but are minimal. The full range of configuration options will be covered in another section of this manual.
+
+### Led keyboard control
+
+The LED controller (e.g, aura) enables setting many of the factory modes available if a laptop supports them. It also enables per-key RGB settings but this is a WIP and will likely be similar to how AniMe sequences can be created.
+
+#### Supported laptops
+
+Models GA401, GA502, GU502 support LED brightness change only (no RGB). However the GA401Q model can actually use three modes; static, breathe, and pulse, plus also use red to control the LED brightness intensity.
+
+All models that have any form of LED mode control need to be enabled via the config file at `/etc/asusd/asusd-ledmodes.toml`. Unfortunately ASUS doesn't provide any easy way to find all the supported modes for all laptops (not even through Armory Crate and its various files, that progrma downloads only the required settings for the laptop it runs on) so each model must be added as needed.
+
+#### Config options
+
+The defaults are located at `/etc/asusd/asusd-ledmodes.toml`, and on `asusd` start it creates `/etc/asusd/aura.conf` whcih stores the per-mode settings. If you edit the defaults file you must remove `/etc/asusd/aura.conf` and restart `asusd.service` with `systemctl restart asusd`.
+
+##### /etc/asusd/asusd-ledmodes.toml
+
+Example:
+```toml
+[[led_data]]
+prod_family = "Strix"
+board_names = ["GL504G"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = ["Key1", "Key2", "Key3", "Key4", "Logo", "BarLeft", "BarRight"]
+per_key = false
+```
+
+1. `prod_family`: you can find this in `journalctl -b -u asusd`, or `cat /sys/class/dmi/id/product_name`. It should be copied as written. There can be multiple `led-data` groups of the same `prod_family` with differing `board_names`.
+2. `board_names`: is an array of board names in this product family. Find this in the journal as above or by `cat /sys/class/dmi/id/board_name`.
+3. `standard` are the factory preset modes, the names should corrospond to Armory Crate names
+4. `multizone`: some models have 4 to 7 zones of LED control as shown in the example. If the laptop has no zones then an empty array will suffice.
+5. `per_key`: enable per-key RGB effects. The keyboard must support this or it has no effect.
+
+##### /etc/asusd/aura.conf
+
+This file can be manually edited if desired, but the `asusctl` CLI tool, or dbus methods are the preferred method. Any manual changes to this file mean that the `asusd.service` will need to be restarted, or you need to cycle between modes to force a reload.
+
+### Charge control
+
+Almost all modern ASUS laptops have charging limit control now. This can be controlled in `/etc/asusd/asusd.conf`.
+
+```json
+"bat_charge_limit": 80,
+```
+where the number is a percentage.
+
+### Bios control
+
+Some options that you find in Armory Crate are available under this controller, so far there is:
+
+- POST sound: this is the sound you hear on bios boot post
+- GPU MUX: this controls if the dGPU is the *only* GPU, making it the main GPU and disabling the iGPU
+
+These options are not written to the config file as they are stored in efivars. The only way to change these is to use the exposed safe dbus methods, or use the `asusctl` CLI tool.
+
+### Profiles
+
+asusctl can support setting a power profile via platform_profile drivers. This requires [power-profiles-daemon](https://gitlab.freedesktop.org/hadess/power-profiles-daemon) v0.10.0 minimum. It also requires the kernel patch for platform_profile support to be applied form [here](https://lkml.org/lkml/2021/8/18/1022) - this patch is merged to 5.15 kernel upstream.
+
+A common use of asusctl is to bind the `fn+f5` (fan) key to `asusctl profile -n` to cycle through the 3 profiles:
+1. Balanced
+2. Performance
+3. Quiet
+
+#### Fan curves
+
+Fan curve support requires a laptop that supports it (this is detected automatically) and the kernel patch from [here](https://lkml.org/lkml/2021/10/23/250) which is accepted for the 5.17 kernel release .
+
+The fan curve format can be of varying formats:
+
+- `30c:0%,40c:5%,50c:10%,60c:20%,70c:35%,80c:55%,90c:65%,100c:65%"`
+- `30:0,40:5,50:10,60:20,70:35,80:55,90:65,100:65"`
+- `30 0,40 5,50 10,60 20,70 35,80 55,90 65,100 65"`
+- `30 0 40 5 50 10 60 20 70 35 80 55 90 65 100 65"`
+
+the order must always be the same "temperature:percentage", lowest from left to rigth being highest.
+
+The config file is located at `/etc/asusd/profile.conf` and is self-descriptive. On first run it is populated with the system EC defaults.
+
+### Support controller
+
+There is one more controller; the support controller. The sole pupose of this controller is to querie all the other controllers for information about their support level for the host laptop. Returns a json string.
+
+## asusd-user
+
+`asusd-user` is a usermode daemon. The intended purpose is to provide a method for users to run there own custom per-key keyboard effects and modes, AniMe sequences, and possibly their own profiles - all without overwriting the *base* system config. As such some parts of the system daemon will migrate to the user daemon over time with the expectation that the Linux system runs both.
+
+As of now only AniMe is active in this with configuration in `~/.config/rog/`. On first run defaults are created that are intended to work as examples.
+
+The main config is `~/.config/rog/rog-user.cfg`
+
+#### Config options: Aura, per-key and zoned
+
+I'm unsure of how many laptops this works on, so please try it.
+
+`led_type: Key` works only on actual per-key RGB keyboards.
+
+`led_type: Zone` works on zoned laptops.
+
+`led_type: Zone` set to `None` works on zoned ROG laptops, unzoned ROG laptops, and TUF laptops (and yes this does mean an audio EQ can be done now).
+
+`~/.config/rog/rog-user.cfg` contains a setting `"active_aura": "<FILENAME>"` where `<FILENAME>` is the name of the Aura config to use, located in the same directory and without the file postfix, e.g, `"active_anime": "aura-default"`
+
+An Aura config itself is a file with contents:
+
+```json
+{
+  "name": "aura-default",
+  "aura": [
+    {
+      "Breathe": {
+        "led_type": {
+          "Key": "W"
+        },
+        "start_colour1": [
+          255,
+          0,
+          20
+        ],
+        "start_colour2": [
+          20,
+          255,
+          0
+        ],
+        "speed": "Low"
+      }
+    },
+    {
+      "Static": {
+        "led_type": {
+          "Key": "Esc"
+        },
+        "colour": [
+          0,
+          0,
+          255
+        ]
+      }
+    },
+    {
+      "Flicker": {
+        "led_type": {
+          "Key": "N9"
+        },
+        "start_colour": [
+          0,
+          0,
+          255
+        ],
+        "max_percentage": 80,
+        "min_percentage": 40
+      }
+    }
+  ]
+}
+```
+
+If your laptop supports multizone, `"led_type"` can also be `"Zone": <one of the following>`
+- `"None"`
+- `"KeyboardLeft"`
+- `"KeyboardCenterLeft"`
+- `"KeyboardCenterRight"`
+- `"KeyboardRight"`
+- `"LightbarRight"`
+- `"LightbarRightCorner"`
+- `"LightbarRightBottom"`
+- `"LightbarLeftBottom"`
+- `"LightbarLeftCorner"`
+- `"LightbarLeft"`
+
+At the moment there are only three effects available as shown in the example. More will come in the future
+but this may take me some time.
+
+**Aura layouts**: `asusd-user` does its best to find a suitable layout to use based on `/sys/class/dmi/id/board_name`.
+It looks at each of the files in `/usr/share/rog-gui/layouts/` and matches against the toml block looking like:
+```toml
+matches = [
+    'GX502',
+    'GU502',
+]
+```
+
+My laptop is a `GX502GW`, so `GX502` is a match. Note that these layouts are the physical representation of
+the keyboard and are used in the GUI also. The config that tells if per-key is supported is located in
+`/etc/asusd/asusd-ledmodes.toml`
+
+#### Config options: AniMe
+
+`~/.config/rog/rog-user.cfg` contains a setting `"active_anime": "<FILENAME>"` where `<FILENAME>` is the name of the AniMe config to use, located in the same directory and without the file postfix, e.g, `"active_anime": "anime-doom"`
+
+An AniMe config itself is a file with contents:
+
+```json
+{
+  "name": "<FILENAME>",
+  "anime": []
+}
+```
+
+`<FILENAME>` is used as a reference internally. `"anime": []` is an array of sequences (WIP).
+
+##### "anime" array options
+
+Each object in the array can be one of:
+
+1. AsusAnimation
+2. ImageAnimation
+3. Image
+4. Pause
+
+##### AsusAnimation
+
+`AsusAnimation` is specifically for running the gif files that Armory Crate comes with. `asusctl` includes all of these in `/usr/share/asusd/anime/asus/`
+```json
+      "AsusAnimation": {
+        "file": "<FILE_PATH>",
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+```
+
+##### AsusImage
+
+Virtually the same as `AsusAnimation` but for png files, typically created in the same "slanted" style using a template (`diagonal-template.png`) as the ASUS gifs for pixel perfection.
+
+```json
+      "AsusImage": {
+        "file": "<FILE_PATH>",
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+```
+
+##### ImageAnimation
+
+`ImageAnimation` can play *any* gif of any size.
+
+```json
+      "ImageAnimation": {
+        "file": "<FILE_PATH>",
+        "scale": <FLOAT>,
+        "angle": <FLOAT>,
+        "translation": [
+          <FLOAT>,
+          <FLOAT>
+        ],
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+    },
+```
+
+##### Image
+
+`Image` currently requires 8bit greyscale png. It will be able to use most in future.
+
+```json
+    {
+      "Image": {
+        "file": "<FILE_PATH>",
+        "scale": <FLOAT>,
+        "angle": <FLOAT>,
+        "translation": [
+          <FLOAT>,
+          <FLOAT>
+        ],
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+    },
+```
+
+##### Pause
+
+A `Pause` is handy for after an `Image` to hold the `Image` on the AniMe for a period.
+
+```json
+    {
+      "Pause": {
+        "secs": <INT>,
+        "nanos": <INT>
+      }
+    },
+```
+
+##### Options for objects
+
+**<FILE_PATH>**
+
+Must be full path: `"/usr/share/asusd/anime/asus/gaming/Controller.gif"` or `/home/luke/Downloads/random.gif`.
+
+**<FLOAT>**
+
+A number from 0.0-1.0.
+- `brightness`: If it is brightness it is combined with the system daemon global brightness
+- `scale`: 1.0 is the original size with lower number shrinking, larger growing
+- `angle`: Rotation angle in radians
+- `translation`: Shift the image X -/+, and y -/+
+
+**<TIME>**
+
+Time is the length of time to run the gif for:
+```json
+        "time": {
+          "Time": {
+            "secs": 5,
+            "nanos": 0
+          }
+        },
+```
+A cycle is how many gif loops to run:
+```json
+        "time": {
+          "Cycles": 2
+        },
+```
+`Infinite` means that this gif will never end:
+```json
+        "time": "Infinite",
+```
+`Fade` allows an image or gif to fade in and out, and remain at max brightness to n time:
+```json
+        "time": {
+          "Fade": {
+            "fade_in": {
+              "secs": 2,
+              "nanos": 0
+            },
+            "show_for": {
+              "secs": 1,
+              "nanos": 0
+            },
+            "fade_out": {
+              "secs": 2,
+              "nanos": 0
+            }
+          }
+        },
+```
+`show_for` can be `null`, if it is `null` then the `show_for` becomes `gif_time_length - fade_in - fade_out`.
+This is period for which the gif or image will be max brightness (as set).
+
+**<INT>**
+
+A plain non-float integer.
+
+## asusctl
+
+`asusctl` is a commandline interface which intends to be the main method of interacting with `asusd`. It can be used in any place a terminal app can be used.
+
+This program will query `asusd` for the `Support` level of the laptop and show or hide options according to this support level.
+
+Most commands are self-explanatory.
+
+### CLI Usage and help
+
+Commands are given by:
+
+```
+asusctl <option> <command> <command-options>
+```
+
+Help is available through:
+
+```
+asusctl --help
+asusctl <command> --help
+```
+
+Some commands may have subcommands:
+
+```
+asusctl <command> <subcommand> --help
+```
+
+### Keybinds
+
+To switch to next/previous Aura modes you will need to bind both the aura keys (if available) to one of:
+**Next**
+```
+asusctl led-mode -n
+```
+**Previous**
+```
+asusctl led-mode -p
+```
+
+To switch Fan/Thermal profiles you need to bind the Fn+F5 key to `asusctl profile -n`.
+
+## User NOTIFICATIONS via dbus
+
+If you have a notifications handler set up, or are using KDE or Gnome then you
+can enable the user service to get basic notifications when something changes.
+
+```
+systemctl --user enable asus-notify.service
+systemctl --user start asus-notify.service
+```
+
+# License & Trademarks
+
+Mozilla Public License 2 (MPL-2.0)
+
+---
+
+ASUS and ROG Trademark is either a US registered trademark or trademark of ASUSTeK Computer Inc. in the United States and/or other countries.
+
+Reference to any ASUS products, services, processes, or other information and/or use of ASUS Trademarks does not constitute or imply endorsement, sponsorship, or recommendation thereof by ASUS.
+
+The use of ROG and ASUS trademarks within this website and associated tools and libraries is only to provide a recognisable identifier to users to enable them to associate that these tools will work with ASUS ROG laptops.
+
+---

Makefile

@@ -1,32 +1,36 @@
-prefix ?= /usr
-sysconfdir ?= /etc
+VERSION := $(shell grep -Pm1 'version = "(\d.\d.\d)"' daemon/Cargo.toml | cut -d'"' -f2)
+
+INSTALL = install
+INSTALL_PROGRAM = ${INSTALL} -D -m 0755
+INSTALL_DATA = ${INSTALL} -D -m 0644
+
+prefix = /usr
 exec_prefix = $(prefix)
 bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
 datarootdir = $(prefix)/share
-datadir = $(datarootdir)
+libdir = $(exec_prefix)/lib
+zshcpl = $(datarootdir)/zsh/site-functions
 
-SRC = Cargo.toml Cargo.lock Makefile $(shell find -type f -wholename '**/src/*.rs')
+BIN_ROG := rog-control-center
+BIN_C := asusctl
+BIN_D := asusd
+BIN_U := asusd-user
+LEDCFG := asusd-ledmodes.toml
 
-.PHONY: all clean distclean install uninstall update
-
-BIN_C=asusctl
-BIN_D=asusd
-LEDCONFIG=asusd-ledmodes.toml
+SRC := Cargo.toml Cargo.lock Makefile $(shell find -type f -wholename '**/src/*.rs')
 
 DEBUG ?= 0
 ifeq ($(DEBUG),0)
-	ARGS += "--release"
+	ARGS += --release
 	TARGET = release
 endif
 
 VENDORED ?= 0
 ifeq ($(VENDORED),1)
-	ARGS += "--frozen"
+	ARGS += --frozen
 endif
 
-all: target/release/$(BIN_D)
+all: build
 
 clean:
 	cargo clean
@@ -34,20 +38,58 @@ clean:
 distclean:
 	rm -rf .cargo vendor vendor.tar.xz
 
-install: all
-	install -D -m 0755 "target/release/$(BIN_C)" "$(DESTDIR)$(bindir)/$(BIN_C)"
-	install -D -m 0755 "target/release/$(BIN_D)" "$(DESTDIR)$(bindir)/$(BIN_D)"
-	install -D -m 0644 "data/$(BIN_D).rules" "$(DESTDIR)/lib/udev/rules.d/99-$(BIN_D).rules"
-	install -D -m 0644 "data/$(LEDCONFIG)" "$(DESTDIR)$(sysconfdir)/asusd/$(LEDCONFIG)"
-	install -D -m 0644 "data/$(BIN_D).conf" "$(DESTDIR)$(sysconfdir)/dbus-1/system.d/$(BIN_D).conf"
-	install -D -m 0644 "data/$(BIN_D).service" "$(DESTDIR)/lib/systemd/system/$(BIN_D).service"
+install:
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_ROG)" "$(DESTDIR)$(bindir)/$(BIN_ROG)"
+	$(INSTALL_DATA) "./rog-control-center/data/$(BIN_ROG).desktop" "$(DESTDIR)$(datarootdir)/applications/$(BIN_ROG).desktop"
+	$(INSTALL_DATA) "./rog-control-center/data/$(BIN_ROG).png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/$(BIN_ROG).png"
+	cd rog-aura/data/layouts && find . -type f -name "*.toml" -exec $(INSTALL_DATA) "{}" "$(DESTDIR)$(datarootdir)/rog-gui/layouts/{}" \;
+
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_C)" "$(DESTDIR)$(bindir)/$(BIN_C)"
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_D)" "$(DESTDIR)$(bindir)/$(BIN_D)"
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_U)" "$(DESTDIR)$(bindir)/$(BIN_U)"
+
+	$(INSTALL_DATA) "./data/$(BIN_D).rules" "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
+	$(INSTALL_DATA) "./data/$(LEDCFG)" "$(DESTDIR)/etc/asusd/$(LEDCFG)"
+	$(INSTALL_DATA) "./data/$(BIN_D).conf" "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
+
+	$(INSTALL_DATA) "./data/$(BIN_D).service" "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
+	$(INSTALL_DATA) "./data/$(BIN_U).service" "$(DESTDIR)$(libdir)/systemd/user/$(BIN_U).service"
+
+	$(INSTALL_DATA) "./data/icons/asus_notif_yellow.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_yellow.png"
+	$(INSTALL_DATA) "./data/icons/asus_notif_green.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_green.png"
+	$(INSTALL_DATA) "./data/icons/asus_notif_red.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_red.png"
+
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-compute.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-compute.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-hybrid.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-hybrid.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-integrated.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-integrated.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-nvidia.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-nvidia.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-vfio.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-vfio.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/notification-reboot.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/notification-reboot.svg"
+
+	cd rog-anime/data && find "./anime" -type f -exec $(INSTALL_DATA) "{}" "$(DESTDIR)$(datarootdir)/asusd/{}" \;
 
 uninstall:
+	rm -f "$(DESTDIR)$(bindir)/$(BIN_ROG)"
+	rm -r "$(DESTDIR)$(datarootdir)/applications/$(BIN_ROG).desktop"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/$(BIN_ROG).png"
+
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_C)"
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_D)"
-	rm -f "$(DESTDIR)/lib/udev/rules.d/99-$(BIN_D).rules"
-	rm -f "$(DESTDIR)$(sysconfdir)/dbus-1/system.d/$(BIN_D).conf"
-	rm -f "$(DESTDIR)/lib/systemd/system/$(BIN_D).service"
+	rm -f "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
+	rm -f "$(DESTDIR)/etc/asusd/$(LEDCFG)"
+	rm -f "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
+	rm -f "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_yellow.png"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_green.png"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_red.png"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-compute.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-hybrid.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-integrated.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-nvidia.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-vfio.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/notification-reboot.svg"
+	rm -rf "$(DESTDIR)$(datarootdir)/asusd"
+	rm -rf "$(DESTDIR)$(datarootdir)/rog-gui"
 
 update:
 	cargo update
@@ -56,11 +98,20 @@ vendor:
 	mkdir -p .cargo
 	cargo vendor | head -n -1 > .cargo/config
 	echo 'directory = "vendor"' >> .cargo/config
-	tar pcfJ vendor.tar.xz vendor
+	mv .cargo/config ./cargo-config
+	rm -rf .cargo
+	tar pcfJ vendor_asusctl_$(VERSION).tar.xz vendor
 	rm -rf vendor
 
-target/release/$(BIN_D): $(SRC)
+build:
 ifeq ($(VENDORED),1)
-	tar pxf vendor.tar.xz
+	@echo "version = $(VERSION)"
+	tar pxf vendor_asusctl_$(VERSION).tar.xz
 endif
 	cargo build $(ARGS)
+	strip -s ./target/release/$(BIN_C)
+	strip -s ./target/release/$(BIN_D)
+	strip -s ./target/release/$(BIN_U)
+	strip -s ./target/release/$(BIN_ROG)
+
+.PHONY: all clean distclean install uninstall update build

README.md

@@ -1,124 +1,96 @@
-# ASUS NB Ctrl
+# `asusctl` for ASUS ROG
 
-**NOTICE:**
+[![](https://www.paypalobjects.com/en_US/i/btn/btn_donate_LG.gif)](https://www.paypal.com/donate/?hosted_button_id=4V2DEPS7K6APC) - [Asus Linux Website](https://asus-linux.org/)
 
-This program requires the kernel patch in `./kernel-patch/` to be applied.
-As of 04/08/2020 these have been submitted to lkml.
+**WARNING:** Do not run the main branch of this repo unless you have all the asus-wmi kernel patches. You should use stable kernels + tagged releases.
 
-The patch enables the following in kernel:
+`asusd` is a utility for Linux to control many aspects of various ASUS laptops
+but can also be used with non-asus laptops with reduced features.
 
-- All hotkeys (FN+Key combos)
-- Control of keyboard brightness using FN+Key combos (not RGB)
-- FN+F5 (fan) to toggle fan modes
+Now includes a GUI, `rog-control-center`.
 
-You will not get RGB control in kernel (yet), and asusd is still required to
-change modes and RGB settings. The previous version of this program is named
-`rog-core` and takes full control of the interfaces required - if you can't
-apply the kernel patches then `rog-core` is still highly usable.
+## Kernel support
 
-Many other patches for these laptops, AMD and Intel based, are working their way
-in to the kernel.
+**The minimum supported kernel version is 5.17**
 
----
-asusd is a utility for Linux to control many aspects of various ASUS laptops.
+## Goals
+
+1. To provide an interface for rootless control of some system functions most users wish to control such as fan speeds, keyboard LEDs, graphics modes.
+2. Enable third-party apps to use the above with dbus methods
+3. To make the above as easy as possible for new users
+4. Respect the users resources: be small, light, and fast
+
+Point 3 means that the list of supported distros is very narrow - fedora is explicitly
+supported. All other distros are *not* supported (while asusd might still run fine on them).
+For best support use fedora 36+ Workstation.
+
+Point 4? asusd currently uses a tiny fraction of cpu time, and less than 1Mb of ram, the way
+a system-level daemon should.
 
 ## Discord
 
-[Discord server link](https://discord.gg/PVyFzWj)
+[Discord server link](https://discord.gg/4ZKGd7Un5t)
 
 ## SUPPORTED LAPTOPS
 
-If your laptop is not in the following lists, it may still work with fan-mode switching and charge limit control.
-
-**Please help test or provide info for:**
-
-- GL703(0x1869)
-- GL553/GL753 (device = 0x1854) (attempted support from researching 2nd-hand info, multizone may work)
-
-**Laptop support is modified on a per-case basis** as the EC for the keyboard varies
-a little between models, e.g, some RGB modes are missing, or it's a single colour.
-As far as I can see, the EC does not give us a way to find what modes are supported.
-
-### ANIME AND OTHER FUNCTIONS
-
-**AniMe device check is performed on start, if your device has one it will be detected.**
-
-**NOTE:** If charge limit or fan modes are not working, then you may require a kernel newer than 5.6.10.
-
-- [X] AniMe Matrix display
-- [X] Power profile switching on fan-mode (FN+F5)
-  - [X] Intel
-    - [X] Turbo enale/disable
-    - [X] Min frequency percentage
-    - [X] Max frequency percentage
-  - [X] AMD
-    - [X] Turbo enale/disable
-- [X] Battery charge limit
-
-**NOTE:** GA14/GA401 and GA15/GA502/GU502, You will need kernel [patches](https://lab.retarded.farm/zappel/asus-rog-zephyrus-g14/-/tree/master/kernel_patches).
-
-### KEYBOARD BACKLIGHT MODES
-
-Models GA401, GA502, GU502 support LED brightness change only (no RGB).
-
-| MODEL  | STATIC | BREATHING | STROBE | RAINBOW | STAR | RAIN | HIGHLIGHT | LASER | RIPPLE | PULSE | COMET | FLASH | ZONES | PER-KEY RGB |
-|:------:|:------:|:---------:|:------:|:-------:|:----:|:----:|:---------:|:-----:|:------:|:-----:|:-----:|:-----:|:-----:|:-----------:|
-| G512LI |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |       |             |
-| G712LI |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |       |             |
-| GM501  |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| GX531  |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| G512   |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| G712   |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| GX502  |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |       |     X       |
-| GX701  |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |       |     X       |
-| G531   |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |   X   |     X       |
-| G731   |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |   X   |     X       |
-| G532   |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |       |     X       |
-
-It is highly likely this doesn't cover all models.
-
-For editing the `/etc/asusd/asusd-ledmodes.toml`, the LED Mode numbers are as follows:
+Most ASUS gaming laptops that have a USB keyboard. If `lsusb` shows something similar
+to this:
 
 ```
-0   STATIC
-1   BREATHING
-2   STROBE
-3   RAINBOW
-4   STAR
-5   RAIN
-6   HIGHLIGHT
-7   LASER
-8   RIPPLE
-10  PULSE
-11  COMET
-12  FLASH
-13  MULTISTATIC
-255 PER_KEY
+Bus 001 Device 002: ID 0b05:1866 ASUSTek Computer, Inc. N-KEY Device
 ```
 
+then it may work without tweaks. Technically all other functions except the LED
+and AniMe parts should work regardless of your latop make.
+
+**TUF Laptops**: now supported provided the kernel is patched. These patches are submitted upstream and will be in version 6.1.x of the kernel (or thereabouts). See the blog on asus-linux.org for more info.
+
 ## Implemented
 
-- [X] Daemon
+- [X] System daemon
+- [X] GUI app
+- [X] User notifications daemon
 - [X] Setting/modifying built-in LED modes
 - [X] Per-key LED setting
-- [X] Fancy LED modes (See examples)
+- [X] Fancy LED modes (See examples) (currently being reworked)
 - [X] Saving settings for reload
-- [X] Logging - required for journalctl
 - [X] AniMatrix display on G14 models that include it
 - [X] Set battery charge limit (with kernel supporting this)
+- [X] Fan curve control on supported laptops (G14/G15, some TUF like FA507)
+- [X] Toggle bios setting for boot/POST sound
+- [X] Toggle GPU MUX (g-sync, or called MUX on 2022+ laptops)
 
-## Requirements for compiling
+# GUI
 
-- `rustc` + `cargo` + `make`
-- `libusb-1.0-0-dev`
-- `libdbus-1-dev`
-- `llvm`
-- `libclang-dev`
-- `libudev-dev`
+A gui is now in the repo - ROG Control Center. At this time it is still a WIP, but it has almost all features in place already.
+
+![](/extra/system.png)
+![](/extra/fan-curves.png)
+![](/extra/keyboard.png)
+
+# BUILDING
+
+Requirements are rust >= 1.57 installed from rustup.io if the distro provided version is too old, and `make`.
+
+**Ubuntu (unsuported):**
+
+    apt install libclang-dev libudev-dev
+    curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+    make
+    sudo make install
+
+**fedora:**
+
+    dnf install clang-devel systemd-devel cargo
+    make
+    sudo make install
 
 ## Installing
+- Fedora copr = https://copr.fedorainfracloud.org/coprs/lukenukem/asus-linux/
+- openSUSE = https://download.opensuse.org/repositories/home:/luke_nukem:/asus/
+- Ubuntu = not supported due to packaging woes, but you can build and install on your own.
 
-Run `make` then `sudo make install` then reboot.
+=======
 
 The default init method is to use the udev rule, this ensures that the service is
 started when the device is initialised and ready.
@@ -129,147 +101,28 @@ If you are upgrading from a previous installed version, you will need to restart
 $ systemctl daemon-reload && systemctl restart asusd
 ```
 
-You may also need to activate the service for debian install. If running Pop!_OS, I suggest disabling `system76-power`
-gnome-shell extension, or at least limiting use of the power-management parts as `asusd` lets you set the same things
-(one or the other will overwrite pstates). I will create a shell extension at some point similar to system76, but using
-the asusd parts. It is safe to leave `system76-power.service` enabled and use for switching between graphics modes.
+You may also need to activate the service for debian install. If running Pop!_OS, I suggest disabling `system76-power` gnome-shell extension and systemd service.
 
 ## Uninstalling
 
-Run `sudo make uninstall` in the source repo, and remove `/etc/asusd.conf`.
+Run `sudo make uninstall` in the source repo, and remove `/etc/asusd/`.
 
-## Updating
+# OTHER
 
-Occasionally you need to remove `/etc/asusd.conf` and restart the daemon to create a new one. You *can* back up the old
-one and copy settings back over (then restart daemon again).
-
-# Usage
-
-**NOTE! Fan mode toggling requires a newer kernel**. I'm unsure when the patches required for it got merged - I've
-tested with the 5.6.6 kernel and above only. To see if the fan-mode changed cat either:
-
-- `cat /sys/devices/platform/asus-nb-wmi/throttle_thermal_policy` or
-- `cat /sys/devices/platform/asus-nb-wmi/fan_boost_mode`
-
-The numbers are 0 = Normal/Balanced, 1 = Boost, 2 = Silent.
-
-Running the program as a daemon manually will require root. Standard (non-daemon) mode expects to be communicating with
-the daemon mode over dbus.
-
-Commands are given by:
-
-```
-asusctl <option> <command> <command-options>
-```
-
-Help is available through:
-
-```
-asusctl --help
-asusctl <command> --help
-```
-
-Some commands may have subcommands:
-
-```
-asusctl <command> <subcommand> --help
-```
-
-### Example
-
-```
-$ asusctl --help
-Usage: asusctl [OPTIONS]
-
-Optional arguments:
-  -h, --help             print help message
-  -v, --version          show program version number
-  -k, --kbd-bright VAL   <off, low, med, high>
-  -p, --pwr-profile PWR  <silent, normal, boost>
-  -c, --chg-limit CHRG   <20-100>
-
-Available commands:
-  led-mode  Set the keyboard lighting from built-in modes
-
-$ asusctl led-mode --help
-Usage: asusctl led-mode [OPTIONS]
-
-Optional arguments:
-  -h, --help  print help message
-
-Available commands:
-  static        set a single static colour
-  breathe       pulse between one or two colours
-  strobe        strobe through all colours
-  rainbow       rainbow cycling in one of four directions
-  star          rain pattern mimicking raindrops
-  rain          rain pattern of three preset colours
-  highlight     pressed keys are highlighted to fade
-  laser         pressed keys generate horizontal laser
-  ripple        pressed keys ripple outwards like a splash
-  pulse         set a rapid pulse
-  comet         set a vertical line zooming from left
-  flash         set a wide vertical line zooming from left
-  multi-static  4-zone multi-colour
-
-$ asusctl led-mode static --help
-Usage: asusctl led-mode static [OPTIONS]
-
-Optional arguments:
-  -h, --help  print help message
-  -c HEX      set the RGB value e.g, ff00ff
-
-$ asusctl led-mode star --help
-Usage: asusctl led-mode star [OPTIONS]
-
-Optional arguments:
-  -h, --help  print help message
-  -c HEX      set the first RGB value e.g, ff00ff
-  -C HEX      set the second RGB value e.g, ff00ff
-  -s SPEED    set the speed: low, med, high
-```
-
-## Daemon mode
-
-If the daemon service is enabled then on boot the following will be reloaded from save:
-
-- LED brightness
-- Last used built-in mode
-- fan-boost/thermal mode
-- battery charging limit
-
-The daemon also saves the settings per mode as the keyboard does not do this
-itself - this means cycling through modes with the Aura keys will use the
-settings that were used via CLI.
-
-Daemon mode creates a config file at `/etc/asusd.conf` which you can edit a 
-little of. Most parts will be byte arrays, but you can adjust things like
-`mode_performance`.
-
-### DBUS Input
-
-See [README_DBUS.md](./README_DBUS.md).
-
-### AniMe input
-
-You will want to look at what MeuMeu has done with [https://github.com/Meumeu/ZephyrusBling/](https://github.com/Meumeu/ZephyrusBling/)
-
-### Wireshark captures
-
-TODO: see `./wireshark_data/` for some captures.
-
-### Supporting more laptops
+## Supporting more laptops
 
 Please file a support request.
 
-## License
+# License & Trademarks
 
 Mozilla Public License 2 (MPL-2.0)
 
-# Credits
+---
 
-- [flukejones](https://github.com/flukejones/), project maintainer.
-- [tuxuser](https://github.com/tuxuser/)
-- [aspann](https://github.com/aspann)
-- [meumeu](https://github.com/Meumeu)
-- Anyone missed? Please contact me
+ASUS and ROG Trademark is either a US registered trademark or trademark of ASUSTeK Computer Inc. in the United States and/or other countries.
+
+Reference to any ASUS products, services, processes, or other information and/or use of ASUS Trademarks does not constitute or imply endorsement, sponsorship, or recommendation thereof by ASUS.
+
+The use of ROG and ASUS trademarks within this website and associated tools and libraries is only to provide a recognisable identifier to users to enable them to associate that these tools will work with ASUS ROG laptops.
+
+---

README_DBUS.md

@@ -1,158 +0,0 @@
-# DBUS Guide
-
-```rust
-pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
-pub static DBUS_PATH: &str = "/org/asuslinux/Daemon";
-pub static DBUS_IFACE: &str = "org.asuslinux.Daemon";
-```
-
-## Methods
-
-- `SetKeyBacklight`
-- `GetKeyBacklight`
-- `AnimatrixWrite`
-- `SetFanMode`
-- `GetFanMode`
-- `SetChargeLimit`
-- `GetChargeLimit`
-- `GetKeyBacklightModes`
-
-## Signals
-
-- `KeyBacklightChanged`
-- `FanModeChanged`
-- `ChargeLimitChanged`
-
-## Method Inputs
-
-### SetKeyBacklight
-
-This method expects a string of JSON as input. The JSON is of format such:
-
-```
-{
-  "Static": {
-    "colour": [ 255, 0, 0]
-  }
-}
-```
-
-The possible contents of a mode are:
-
-- `"colour": [u8, u8, u8],`
-- `"speed": <String>,` <Low, Med, High>
-- `"direction": <String>,` <Up, Down, Left, Right>
-
-Modes may or may not be available for a specific laptop (TODO: dbus getter for
-supported modes). Modes are:
-
-- `"Static": { "colour": <colour> },`
-- `"Pulse": { "colour": <colour> },`
-- `"Comet": { "colour": <colour> },`
-- `"Flash": { "colour": <colour> },`
-- `"Strobe": { "speed": <speed> },`
-- `"Rain": { "speed": <speed> },`
-- `"Laser": { "colour": <colour>, "speed": <speed> },`
-- `"Ripple": { "colour": <colour>, "speed": <speed> },`
-- `"Highlight": { "colour": <colour>, "speed": <speed> },`
-- `"Rainbow": { "direction": <direction>, "speed": <speed> },`
-- `"Breathe": { "colour": <colour>, "colour2": <colour>, "speed": <speed> },`
-- `"Star": { "colour": <colour>, "colour2": <colour>, "speed": <speed> },`
-- `"MultiStatic": { "colour1": <colour>, "colour2": <colour>, , "colour3": <colour>, "colour4": <colour> },`
-
-Additionally to the above there is `"RGB": [[u8; 64]; 11]` which is for per-key
-setting of LED's but this requires some refactoring to make it easily useable over
-dbus.
-
-Lastly, there is `"LedBrightness": <u8>` which accepts 0-3 for off, low, med, high.
-
-### GetKeyBacklight
-
-This method will return a JSON string in the same format as accepted by `SetKeyBacklight`.
-
-### GetKeyBacklightModes
-
-Will return a JSON string array of modes that this laptop accepts. The mode data
-within this will be the current settings per mode. Good for:
-
-- Getting supported modes
-- Getting all mode settings
-
-### AnimatrixWrite
-
-Used to write data to the AniMe display if available. Currently is takes `[[u8; 640]; 2]`
-which must be the byte data that will be written directly to the USB device.
-
-### SetFanMode
-
-Accepts an integer from the following:
-
-- `0`: Normal
-- `1`: Boost mode
-- `2`: Silent mode
-
-### GetFanMode
-
-Returns the integer set from above.
-
-### SetChargeLimit
-
-Accepts an integer in the range of 20-100.
-
-### GetChargeLimit
-
-Returns the integer set from above.
-
-## Signal Outs
-
-### KeyBacklightChanged
-
-When emitted, it will emit the JSON data of the mode changed to, e.g:
-
-```
-{
-  "Static": {
-    "colour": [ 255, 0, 0]
-  }
-}
-```
-
-### FanModeChanged
-
-When emitted, it will include the integer the fan mode was changed to.
-
-### ChargeLimitChanged
-
-When emitted, it will include the integer the charging limit was changed to.
-
-## dbus-send examples
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"Static": {"colour": [ 80, 0, 40]}}'
-```
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"Star":{"colour":[0,255,255],"colour2":[0,0,0],"speed":"Med"}}'
-```
-
-**Note:** setting colour2 to `[0,0,255]` activates random star colour. Colour2 has no effect on the
-mode otherwise.
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"Star":{"colour":[0,255,255],"colour2":[0,0,255],"speed":"Med"}}'
-```
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"LedBrightness":3}'
-```
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetFanMode byte:'2'
-```
-
-Monitoring dbus while sending commands via `rog-core` will give you the json structure if you are otherwise unsure, e.g: `dbus-monitor --system |grep -A2 asuslinux`.
-
-## Getting an introspection .xml
-
-```
-dbus-send --system --print-reply --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.freedesktop.DBus.Introspectable.Introspect > xml/dbus-0.14.4.xml
-```

asus-nb-ctrl.spec

@@ -1,70 +0,0 @@
-%if %{defined fedora}
-%global debug_package %{nil}
-%endif
-
-# Use hardening ldflags.
-%global rustflags -Clink-arg=-Wl,-z,relro,-z,now
-Name:           asus-nb-ctrl
-Version:        1.0.0
-Release:        0
-Summary:        Text editor for terminal
-License:        MPLv2
-Group:          Productivity/Text/Editors
-URL:            https://gitlab.com/asus-linux/asus-nb-ctrl
-Source:         %{name}-%{version}.tar.gz
-# cargo vendor &&
-# tar cfJ vendor.tar.xz vendor
-Source1:        vendor.tar.xz
-BuildRequires:  clang-devel
-BuildRequires:  cargo
-BuildRequires:  rust
-BuildRequires:  rust-std-static
-BuildRequires:  pkgconfig(dbus-1)
-BuildRequires:  pkgconfig(libudev)
-
-%description
-ASUS Laptop control
-
-%prep
-%setup -q -n %name-next
-%setup -q -n %name-next -D -T -a 1
-
-mkdir .cargo
-cat >.cargo/config <<EOF
-[source.crates-io]
-replace-with = "vendored-sources"
-
-[source.vendored-sources]
-directory = "vendor"
-EOF
-
-%build
-export RUSTFLAGS="%{rustflags}"
-RUST_BACKTRACE=1 cargo build --release
-
-%install
-export RUSTFLAGS="%{rustflags}"
-
-mkdir -p "%{buildroot}%{_bindir}"
-install -D -m 0755 target/release/asusd %{buildroot}%{_bindir}/asusd
-install -D -m 0755 target/release/asusctl %{buildroot}%{_bindir}/asusctl
-install -D -m 0644 data/asusd.rules %{buildroot}%{_udevrulesdir}/90-asusd.rules
-install -D -m 0644 data/asusd.conf  %{buildroot}%{_sysconfdir}/dbus-1/system.d/asusd.conf
-install -D -m 0644 data/asusd.service %{buildroot}%{_unitdir}/asusd.service
-install -D -m 0644 data/asusd-ledmodes.toml  %{buildroot}%{_sysconfdir}/asusd/asusd-ledmodes.toml
-
-mkdir -p "%{buildroot}%{_datadir}/licenses/%{name}"
-cp LICENSE "%{buildroot}%{_datadir}/licenses/%{name}/"
-
-mkdir -p "%{buildroot}/bin"
-
-%files
-%license LICENSE
-%{_bindir}/asusd
-%{_bindir}/asusctl
-%{_unitdir}/asusd.service
-%{_udevrulesdir}/90-asusd.rules
-%{_sysconfdir}/dbus-1/system.d/asusd.conf
-%{_sysconfdir}/asusd/asusd-ledmodes.toml
-
-%changelog

asus-nb-ctrl/Cargo.toml

@@ -1,49 +0,0 @@
-[package]
-name = "asus-nb-ctrl"
-version = "1.0.1"
-license = "MPL-2.0"
-readme = "README.md"
-authors = ["Luke <luke@ljones.dev>"]
-repository = "https://gitlab.com/asus-linux/asus-nb-ctrl"
-homepage = "https://gitlab.com/asus-linux/asus-nb-ctrl"
-description = "A daemon app for ASUS GX502 and similar laptops to control missing features"
-edition = "2018"
-
-[lib]
-name = "daemon"
-path = "src/lib.rs"
-
-[[bin]]
-name = "asusctl"
-path = "src/main.rs"
-
-[[bin]]
-name = "asusd"
-path = "src/daemon.rs"
-
-[dependencies]
-asus-nb = { path = "../asus-nb" }
-rusb = "^0.6.0"
-udev = "^0.4.0"
-async-trait = "0.1.36"
-
-# cli and logging
-gumdrop = "^0.8.0"
-log = "^0.4.8"
-env_logger = "^0.7.1"
-
-# async
-dbus = { version = "^0.8.2", features = ["futures"] }
-dbus-tokio = "^0.5.1"
-tokio = { version = "^0.2.4", features = ["rt-threaded", "sync"] }
-
-# serialisation
-serde = "^1.0"
-serde_derive = "^1.0"
-serde_json = "^1.0"
-toml = "0.4.6"
-
-# Device control
-sysfs-class = "^0.1.2" # used for backlight control and baord ID
-# cpu power management
-intel-pstate = "^0.2.1"

asus-nb-ctrl/src/config.rs

@@ -1,128 +0,0 @@
-use asus_nb::aura_modes::AuraModes;
-use log::{error, warn};
-use serde_derive::{Deserialize, Serialize};
-use std::fs::{File, OpenOptions};
-use std::io::{Read, Write};
-
-pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
-
-#[derive(Default, Deserialize, Serialize)]
-pub struct Config {
-    pub power_profile: u8,
-    pub bat_charge_limit: u8,
-    pub kbd_led_brightness: u8,
-    pub kbd_backlight_mode: u8,
-    pub kbd_backlight_modes: Vec<AuraModes>,
-    pub power_profiles: FanModeProfile,
-}
-
-impl Config {
-    /// `load` will attempt to read the config, but if it is not found it
-    /// will create a new default config and write that out.
-    pub fn load(mut self, supported_led_modes: &[u8]) -> Self {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .write(true)
-            .create(true)
-            .open(&CONFIG_PATH)
-            .unwrap(); // okay to cause panic here
-        let mut buf = String::new();
-        if let Ok(l) = file.read_to_string(&mut buf) {
-            if l == 0 {
-                self = Config::create_default(&mut file, &supported_led_modes);
-            } else {
-                self = serde_json::from_str(&buf).unwrap_or_else(|_| {
-                    warn!("Could not deserialise {}", CONFIG_PATH);
-                    Config::create_default(&mut file, &supported_led_modes)
-                });
-            }
-        }
-        self
-    }
-
-    fn create_default(file: &mut File, supported_led_modes: &[u8]) -> Self {
-        // create a default config here
-        let mut c = Config::default();
-        c.bat_charge_limit = 100;
-        c.kbd_backlight_mode = 0;
-        c.kbd_led_brightness = 1;
-
-        for n in supported_led_modes {
-            c.kbd_backlight_modes.push(AuraModes::from(*n))
-        }
-
-        // Should be okay to unwrap this as is since it is a Default
-        let json = serde_json::to_string_pretty(&c).unwrap();
-        file.write_all(json.as_bytes())
-            .unwrap_or_else(|_| panic!("Could not write {}", CONFIG_PATH));
-        c
-    }
-
-    pub fn read(&mut self) {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(&CONFIG_PATH)
-            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
-        let mut buf = String::new();
-        if let Ok(l) = file.read_to_string(&mut buf) {
-            if l == 0 {
-                warn!("File is empty {}", CONFIG_PATH);
-            } else {
-                let x: Config = serde_json::from_str(&buf)
-                    .unwrap_or_else(|_| panic!("Could not deserialise {}", CONFIG_PATH));
-                *self = x;
-            }
-        }
-    }
-
-    pub fn write(&self) {
-        let mut file = File::create(CONFIG_PATH).expect("Couldn't overwrite config");
-        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
-        file.write_all(json.as_bytes())
-            .unwrap_or_else(|err| error!("Could not write config: {}", err));
-    }
-
-    pub fn set_mode_data(&mut self, mode: AuraModes) {
-        let byte: u8 = (&mode).into();
-        for (index, n) in self.kbd_backlight_modes.iter().enumerate() {
-            if byte == u8::from(n) {
-                // Consume it, OMNOMNOMNOM
-                self.kbd_backlight_modes[index] = mode;
-                break;
-            }
-        }
-    }
-
-    pub fn get_led_mode_data(&self, num: u8) -> Option<&AuraModes> {
-        for mode in &self.kbd_backlight_modes {
-            if u8::from(mode) == num {
-                return Some(mode);
-            }
-        }
-        None
-    }
-}
-
-#[derive(Default, Deserialize, Serialize)]
-pub struct FanModeProfile {
-    pub normal: CPUSettings,
-    pub boost: CPUSettings,
-    pub silent: CPUSettings,
-}
-
-#[derive(Deserialize, Serialize)]
-pub struct CPUSettings {
-    pub min_percentage: u8,
-    pub max_percentage: u8,
-    pub no_turbo: bool,
-}
-
-impl Default for CPUSettings {
-    fn default() -> Self {
-        CPUSettings {
-            min_percentage: 0,
-            max_percentage: 100,
-            no_turbo: false,
-        }
-    }
-}

asus-nb-ctrl/src/ctrl_anime.rs

@@ -1,225 +0,0 @@
-const INIT_STR: &str = "ASUS Tech.Inc.";
-const PACKET_SIZE: usize = 640;
-
-// Only these two packets must be 17 bytes
-const DEV_PAGE: u8 = 0x5e;
-// These bytes are in [1] position of the array
-const WRITE: u8 = 0xc0;
-const INIT: u8 = 0xc2;
-const APPLY: u8 = 0xc3;
-const SET: u8 = 0xc4;
-
-use crate::config::Config;
-use asus_nb::error::AuraError;
-use log::{error, info, warn};
-use rusb::{Device, DeviceHandle};
-use std::error::Error;
-use std::sync::Arc;
-use std::time::Duration;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-#[allow(dead_code)]
-#[derive(Debug)]
-pub enum AnimatrixCommand {
-    Apply,
-    Set,
-    WriteImage(Vec<Vec<u8>>),
-    //ReloadLast,
-}
-
-pub struct CtrlAnimeDisplay {
-    handle: DeviceHandle<rusb::GlobalContext>,
-    initialised: bool,
-}
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlAnimeDisplay {
-    type A = Vec<Vec<u8>>;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        mut self,
-        _: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        _: Option<Arc<SyncConnection>>,
-        _: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        vec![tokio::spawn(async move {
-            while let Some(image) = recv.recv().await {
-                self.do_command(AnimatrixCommand::WriteImage(image))
-                    .await
-                    .unwrap_or_else(|err| warn!("{}", err));
-            }
-        })]
-    }
-
-    async fn reload_from_config(&mut self, _: &mut Config) -> Result<(), Box<dyn Error>> {
-        Ok(())
-    }
-}
-
-impl CtrlAnimeDisplay {
-    #[inline]
-    pub fn new() -> Result<CtrlAnimeDisplay, Box<dyn Error>> {
-        // We don't expect this ID to ever change
-        let device = CtrlAnimeDisplay::get_device(0x0b05, 0x193b).map_err(|err| {
-            warn!("Could not get AniMe display handle: {:?}", err);
-            err
-        })?;
-
-        let mut device = device.open()?;
-        device.reset()?;
-
-        device.set_auto_detach_kernel_driver(true).map_err(|err| {
-            error!("Auto-detach kernel driver failed: {:?}", err);
-            err
-        })?;
-
-        device.claim_interface(0).map_err(|err| {
-            error!("Could not claim device interface: {:?}", err);
-            err
-        })?;
-
-        info!("Device has an AniMe Matrix display");
-        Ok(CtrlAnimeDisplay {
-            handle: device,
-            initialised: false,
-        })
-    }
-
-    #[inline]
-    fn get_device(vendor: u16, product: u16) -> Result<Device<rusb::GlobalContext>, rusb::Error> {
-        for device in rusb::devices()?.iter() {
-            let device_desc = device.device_descriptor()?;
-            if device_desc.vendor_id() == vendor && device_desc.product_id() == product {
-                return Ok(device);
-            }
-        }
-        Err(rusb::Error::NoDevice)
-    }
-
-    pub async fn do_command(&mut self, command: AnimatrixCommand) -> Result<(), AuraError> {
-        if !self.initialised {
-            self.do_initialization().await?
-        }
-
-        match command {
-            AnimatrixCommand::WriteImage(effect) => self.write_image(effect).await?,
-            AnimatrixCommand::Set => self.do_set().await?,
-            AnimatrixCommand::Apply => self.do_apply().await?,
-            //AnimatrixCommand::ReloadLast => self.reload_last_builtin(&config).await?,
-        }
-        Ok(())
-    }
-
-    /// Should only be used if the bytes you are writing are verified correct
-    #[inline]
-    async fn write_bytes(&self, message: &[u8]) -> Result<(), AuraError> {
-        let prev = std::time::Instant::now();
-        match self.handle.write_control(
-            0x21,  // request_type
-            0x09,  // request
-            0x35e, // value
-            0x00,  // index
-            message,
-            Duration::from_millis(200),
-        ) {
-            Ok(_) => {
-                println!(
-                    "{:?}",
-                    std::time::Instant::now().duration_since(prev).as_micros()
-                );
-            }
-            Err(err) => match err {
-                rusb::Error::Timeout => {}
-                _ => error!("Failed to write to led interrupt: {:?}", err),
-            },
-        }
-        Ok(())
-    }
-
-    /// Write an Animatrix image
-    ///
-    /// The expected input here is *two* Vectors, 640 bytes in length. The two vectors
-    /// are each one half of the full image write.
-    ///
-    /// After each write a flush is written, it is assumed that this tells the device to
-    /// go ahead and display the written bytes
-    ///
-    /// # Note:
-    /// The vectors are expected to contain the full sequence of bytes as follows
-    ///
-    /// - Write pane 1: 0x5e 0xc0 0x02 0x01 0x00 0x73 0x02 .. <led brightness>
-    /// - Write pane 2: 0x5e 0xc0 0x02 0x74 0x02 0x73 0x02 .. <led brightness>
-    ///
-    /// Where led brightness is 0..255, low to high
-    #[inline]
-    async fn write_image(&mut self, image: Vec<Vec<u8>>) -> Result<(), AuraError> {
-        for row in image.iter() {
-            self.write_bytes(row).await?;
-        }
-        self.do_flush().await?;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_initialization(&mut self) -> Result<(), AuraError> {
-        let mut init = [0; PACKET_SIZE];
-        init[0] = DEV_PAGE; // This is the USB page we're using throughout
-        for (idx, byte) in INIT_STR.as_bytes().iter().enumerate() {
-            init[idx + 1] = *byte
-        }
-        self.write_bytes(&init).await?;
-
-        // clear the init array and write other init message
-        for ch in init.iter_mut() {
-            *ch = 0;
-        }
-        init[0] = DEV_PAGE; // write it to be sure?
-        init[1] = INIT;
-
-        self.write_bytes(&init).await?;
-        self.initialised = true;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_flush(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = WRITE;
-        flush[2] = 0x03;
-
-        self.write_bytes(&flush).await?;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_set(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = SET;
-        flush[2] = 0x01;
-        flush[3] = 0x80;
-
-        self.write_bytes(&flush).await?;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_apply(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = APPLY;
-        flush[2] = 0x01;
-        flush[3] = 0x80;
-
-        self.write_bytes(&flush).await?;
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_charge.rs

@@ -1,96 +0,0 @@
-use crate::config::Config;
-use log::{error, info, warn};
-use std::error::Error;
-use std::fs::OpenOptions;
-use std::io::Write;
-use std::path::Path;
-use std::sync::Arc;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-static BAT_CHARGE_PATH: &str = "/sys/class/power_supply/BAT0/charge_control_end_threshold";
-
-pub struct CtrlCharge {
-    path: &'static str,
-}
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlCharge {
-    type A = u8;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        _: Option<Arc<SyncConnection>>,
-        _: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        vec![tokio::spawn(async move {
-            while let Some(n) = recv.recv().await {
-                let mut config = config.lock().await;
-                self.set_charge_limit(n, &mut config)
-                    .unwrap_or_else(|err| warn!("{:?}", err));
-            }
-        })]
-    }
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        config.read();
-        info!("Reloaded battery charge limit");
-        self.set_charge_limit(config.bat_charge_limit, config)
-    }
-}
-
-impl CtrlCharge {
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let path = CtrlCharge::get_battery_path()?;
-        info!("Device has battery charge threshold control");
-        Ok(CtrlCharge { path })
-    }
-
-    fn get_battery_path() -> Result<&'static str, std::io::Error> {
-        if Path::new(BAT_CHARGE_PATH).exists() {
-            Ok(BAT_CHARGE_PATH)
-        } else {
-            Err(std::io::Error::new(
-                std::io::ErrorKind::NotFound,
-                "Charge control not available",
-            ))
-        }
-    }
-
-    pub(super) fn set_charge_limit(
-        &self,
-        limit: u8,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        if limit < 20 || limit > 100 {
-            warn!(
-                "Unable to set battery charge limit, must be between 20-100: requested {}",
-                limit
-            );
-        }
-
-        let mut file = OpenOptions::new()
-            .write(true)
-            .open(self.path)
-            .map_err(|err| {
-                warn!("Failed to open battery charge limit path: {:?}", err);
-                err
-            })?;
-        file.write_all(limit.to_string().as_bytes())
-            .unwrap_or_else(|err| error!("Could not write to {}, {:?}", BAT_CHARGE_PATH, err));
-        info!("Battery charge limit: {}", limit);
-
-        config.read();
-        config.bat_charge_limit = limit;
-        config.write();
-
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_fan_cpu.rs

@@ -1,276 +0,0 @@
-use crate::config::Config;
-use log::{error, info, warn};
-use std::error::Error;
-use std::fs::OpenOptions;
-use std::io::{Read, Write};
-use std::path::Path;
-use std::str::FromStr;
-use std::sync::Arc;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-static FAN_TYPE_1_PATH: &str = "/sys/devices/platform/asus-nb-wmi/throttle_thermal_policy";
-static FAN_TYPE_2_PATH: &str = "/sys/devices/platform/asus-nb-wmi/fan_boost_mode";
-static AMD_BOOST_PATH: &str = "/sys/devices/system/cpu/cpufreq/boost";
-
-pub struct CtrlFanAndCPU {
-    path: &'static str,
-}
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlFanAndCPU {
-    type A = u8;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        _: Option<Arc<SyncConnection>>,
-        _: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        let gate1 = Arc::new(Mutex::new(self));
-        let gate2 = gate1.clone();
-        let config1 = config.clone();
-        // spawn an endless loop
-        vec![
-            tokio::spawn(async move {
-                while let Some(mode) = recv.recv().await {
-                    let mut config = config1.lock().await;
-                    let mut lock = gate1.lock().await;
-                    lock.set_fan_mode(mode, &mut config)
-                        .unwrap_or_else(|err| warn!("{:?}", err));
-                }
-            }),
-            // need to watch file path
-            tokio::spawn(async move {
-                loop {
-                    let mut lock = gate2.lock().await;
-                    if let Ok(mut config) = config.try_lock() {
-                        lock.fan_mode_check_change(&mut config)
-                            .unwrap_or_else(|err| warn!("{:?}", err));
-                    }
-                    tokio::time::delay_for(std::time::Duration::from_millis(500)).await;
-                }
-            }),
-        ]
-    }
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        let mut file = OpenOptions::new().write(true).open(self.path)?;
-        file.write_all(format!("{:?}\n", config.power_profile).as_bytes())
-            .unwrap_or_else(|err| error!("Could not write to {}, {:?}", self.path, err));
-        self.set_pstate_for_fan_mode(FanLevel::from(config.power_profile), config)?;
-        info!(
-            "Reloaded fan mode: {:?}",
-            FanLevel::from(config.power_profile)
-        );
-        Ok(())
-    }
-}
-
-impl CtrlFanAndCPU {
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let path = CtrlFanAndCPU::get_fan_path()?;
-        info!("Device has thermal throttle control");
-        Ok(CtrlFanAndCPU { path })
-    }
-
-    fn get_fan_path() -> Result<&'static str, std::io::Error> {
-        if Path::new(FAN_TYPE_1_PATH).exists() {
-            Ok(FAN_TYPE_1_PATH)
-        } else if Path::new(FAN_TYPE_2_PATH).exists() {
-            Ok(FAN_TYPE_2_PATH)
-        } else {
-            Err(std::io::Error::new(
-                std::io::ErrorKind::NotFound,
-                "Fan mode not available",
-            ))
-        }
-    }
-
-    pub(super) fn fan_mode_check_change(
-        &mut self,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        let mut file = OpenOptions::new().read(true).open(self.path)?;
-        let mut buf = [0u8; 1];
-        file.read_exact(&mut buf)?;
-        if let Some(num) = char::from(buf[0]).to_digit(10) {
-            if config.power_profile != num as u8 {
-                config.read();
-                config.power_profile = num as u8;
-                config.write();
-                self.set_pstate_for_fan_mode(FanLevel::from(config.power_profile), config)?;
-                info!(
-                    "Fan mode was changed: {:?}",
-                    FanLevel::from(config.power_profile)
-                );
-            }
-            return Ok(());
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::InvalidData,
-            "Fan-level could not be parsed",
-        );
-        Err(Box::new(err))
-    }
-
-    pub(super) fn set_fan_mode(
-        &mut self,
-        n: u8,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        let mut fan_ctrl = OpenOptions::new().write(true).open(self.path)?;
-        config.read();
-        config.power_profile = n;
-        config.write();
-        fan_ctrl
-            .write_all(format!("{:?}\n", config.power_profile).as_bytes())
-            .unwrap_or_else(|err| error!("Could not write to {}, {:?}", self.path, err));
-        info!(
-            "Fan mode set to: {:?}",
-            FanLevel::from(config.power_profile)
-        );
-        self.set_pstate_for_fan_mode(FanLevel::from(n), config)?;
-        Ok(())
-    }
-
-    fn set_pstate_for_fan_mode(
-        &self,
-        mode: FanLevel,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        // Set CPU pstate
-        if let Ok(pstate) = intel_pstate::PState::new() {
-            match mode {
-                FanLevel::Normal => {
-                    pstate.set_min_perf_pct(config.power_profiles.normal.min_percentage)?;
-                    pstate.set_max_perf_pct(config.power_profiles.normal.max_percentage)?;
-                    pstate.set_no_turbo(config.power_profiles.normal.no_turbo)?;
-                    info!(
-                        "Intel CPU Power: min: {:?}%, max: {:?}%, turbo: {:?}",
-                        config.power_profiles.normal.min_percentage,
-                        config.power_profiles.normal.max_percentage,
-                        !config.power_profiles.normal.no_turbo
-                    );
-                }
-                FanLevel::Boost => {
-                    pstate.set_min_perf_pct(config.power_profiles.boost.min_percentage)?;
-                    pstate.set_max_perf_pct(config.power_profiles.boost.max_percentage)?;
-                    pstate.set_no_turbo(config.power_profiles.boost.no_turbo)?;
-                    info!(
-                        "Intel CPU Power: min: {:?}%, max: {:?}%, turbo: {:?}",
-                        config.power_profiles.boost.min_percentage,
-                        config.power_profiles.boost.max_percentage,
-                        !config.power_profiles.boost.no_turbo
-                    );
-                }
-                FanLevel::Silent => {
-                    pstate.set_min_perf_pct(config.power_profiles.silent.min_percentage)?;
-                    pstate.set_max_perf_pct(config.power_profiles.silent.max_percentage)?;
-                    pstate.set_no_turbo(config.power_profiles.silent.no_turbo)?;
-                    info!(
-                        "Intel CPU Power: min: {:?}%, max: {:?}%, turbo: {:?}",
-                        config.power_profiles.silent.min_percentage,
-                        config.power_profiles.silent.max_percentage,
-                        !config.power_profiles.silent.no_turbo
-                    );
-                }
-            }
-        } else {
-            info!("Setting pstate for AMD CPU");
-            // must be AMD CPU
-            let mut file = OpenOptions::new()
-                .write(true)
-                .open(AMD_BOOST_PATH)
-                .map_err(|err| {
-                    warn!("Failed to open AMD boost: {:?}", err);
-                    err
-                })?;
-            match mode {
-                FanLevel::Normal => {
-                    let boost = if config.power_profiles.normal.no_turbo {
-                        "0"
-                    } else {
-                        "1"
-                    }; // opposite of Intel
-                    file.write_all(boost.as_bytes()).unwrap_or_else(|err| {
-                        error!("Could not write to {}, {:?}", AMD_BOOST_PATH, err)
-                    });
-                    info!("AMD CPU Turbo: {:?}", boost);
-                }
-                FanLevel::Boost => {
-                    let boost = if config.power_profiles.boost.no_turbo {
-                        "0"
-                    } else {
-                        "1"
-                    };
-                    file.write_all(boost.as_bytes()).unwrap_or_else(|err| {
-                        error!("Could not write to {}, {:?}", AMD_BOOST_PATH, err)
-                    });
-                    info!("AMD CPU Turbo: {:?}", boost);
-                }
-                FanLevel::Silent => {
-                    let boost = if config.power_profiles.silent.no_turbo {
-                        "0"
-                    } else {
-                        "1"
-                    };
-                    file.write_all(boost.as_bytes()).unwrap_or_else(|err| {
-                        error!("Could not write to {}, {:?}", AMD_BOOST_PATH, err)
-                    });
-                    info!("AMD CPU Turbo: {:?}", boost);
-                }
-            }
-        }
-        Ok(())
-    }
-}
-
-use crate::error::RogError;
-
-#[derive(Debug)]
-pub enum FanLevel {
-    Normal,
-    Boost,
-    Silent,
-}
-
-impl FromStr for FanLevel {
-    type Err = RogError;
-
-    fn from_str(s: &str) -> Result<Self, RogError> {
-        match s.to_lowercase().as_str() {
-            "normal" => Ok(FanLevel::Normal),
-            "boost" => Ok(FanLevel::Boost),
-            "silent" => Ok(FanLevel::Silent),
-            _ => Err(RogError::ParseFanLevel),
-        }
-    }
-}
-
-impl From<u8> for FanLevel {
-    fn from(n: u8) -> Self {
-        match n {
-            0 => FanLevel::Normal,
-            1 => FanLevel::Boost,
-            2 => FanLevel::Silent,
-            _ => FanLevel::Normal,
-        }
-    }
-}
-
-impl From<FanLevel> for u8 {
-    fn from(n: FanLevel) -> Self {
-        match n {
-            FanLevel::Normal => 0,
-            FanLevel::Boost => 1,
-            FanLevel::Silent => 2,
-        }
-    }
-}

asus-nb-ctrl/src/ctrl_leds.rs

@@ -1,316 +0,0 @@
-// Only these two packets must be 17 bytes
-static LED_APPLY: [u8; 17] = [0x5d, 0xb4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-static LED_SET: [u8; 17] = [0x5d, 0xb5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-
-use crate::{config::Config, error::RogError};
-use asus_nb::{
-    aura_brightness_bytes, aura_modes::AuraModes, fancy::KeyColourArray, DBUS_IFACE, DBUS_PATH,
-    LED_MSG_LEN,
-};
-use dbus::{channel::Sender, nonblock::SyncConnection, tree::Signal};
-use log::{info, warn};
-use std::error::Error;
-use std::fs::OpenOptions;
-use std::io::{Read, Write};
-use std::sync::Arc;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-pub struct CtrlKbdBacklight {
-    led_node: String,
-    kbd_node: String,
-    bright_node: String,
-    supported_modes: Vec<u8>,
-    flip_effect_write: bool,
-}
-
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlKbdBacklight {
-    type A = AuraModes;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        connection: Option<Arc<SyncConnection>>,
-        signal: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        let gate1 = Arc::new(Mutex::new(self));
-        let gate2 = gate1.clone();
-
-        let config1 = config.clone();
-        vec![
-            tokio::spawn(async move {
-                while let Some(command) = recv.recv().await {
-                    let mut config = config1.lock().await;
-                    let mut lock = gate1.lock().await;
-                    match &command {
-                        AuraModes::PerKey(_) => {
-                            lock.do_command(command, &mut config)
-                                .await
-                                .unwrap_or_else(|err| warn!("{}", err));
-                        }
-                        _ => {
-                            let json = serde_json::to_string(&command).unwrap();
-                            lock.do_command(command, &mut config)
-                                .await
-                                .unwrap_or_else(|err| warn!("{}", err));
-                            connection
-                                .as_ref()
-                                .expect("LED Controller must have DBUS connection")
-                                .send(
-                                    signal
-                                        .as_ref()
-                                        .expect("LED Controller must have DBUS signal")
-                                        .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                                        .append1(json),
-                                )
-                                .unwrap_or_else(|_| 0);
-                        }
-                    }
-                }
-            }),
-            tokio::spawn(async move {
-                loop {
-                    let mut lock = gate2.lock().await;
-                    if let Ok(mut config) = config.try_lock() {
-                        lock.let_bright_check_change(&mut config)
-                            .unwrap_or_else(|err| warn!("{:?}", err));
-                    }
-                    tokio::time::delay_for(std::time::Duration::from_millis(500)).await;
-                }
-            }),
-        ]
-    }
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        // set current mode (if any)
-        if self.supported_modes.len() > 1 {
-            if self.supported_modes.contains(&config.kbd_backlight_mode) {
-                let mode = config
-                    .get_led_mode_data(config.kbd_backlight_mode)
-                    .ok_or(RogError::NotSupported)?
-                    .to_owned();
-                self.write_mode(&mode).await?;
-                info!("Reloaded last used mode");
-            } else {
-                warn!(
-                    "An unsupported mode was set: {}, reset to first mode available",
-                    <&str>::from(&<AuraModes>::from(config.kbd_backlight_mode))
-                );
-                for (idx, mode) in config.kbd_backlight_modes.iter_mut().enumerate() {
-                    if !self.supported_modes.contains(&mode.into()) {
-                        config.kbd_backlight_modes.remove(idx);
-                        config.write();
-                        break;
-                    }
-                }
-                config.kbd_backlight_mode = self.supported_modes[0];
-                // TODO: do a recursive call with a boxed dyn future later
-                let mode = config
-                    .get_led_mode_data(config.kbd_backlight_mode)
-                    .ok_or(RogError::NotSupported)?
-                    .to_owned();
-                self.write_mode(&mode).await?;
-                info!("Reloaded last used mode");
-            }
-        }
-
-        // Reload brightness
-        let bright = config.kbd_led_brightness;
-        let bytes = aura_brightness_bytes(bright);
-        self.write_bytes(&bytes).await?;
-        info!("Reloaded last used brightness");
-        Ok(())
-    }
-}
-
-impl CtrlKbdBacklight {
-    #[inline]
-    pub fn new(id_product: &str, supported_modes: Vec<u8>) -> Result<Self, std::io::Error> {
-        Ok(CtrlKbdBacklight {
-            led_node: Self::scan_led_node(id_product)?,
-            kbd_node: Self::scan_kbd_node(id_product)?,
-            // brightness node path should always be constant but this *might* change?
-            bright_node: "/sys/class/leds/asus::kbd_backlight/brightness".to_string(),
-            supported_modes,
-            flip_effect_write: false,
-        })
-    }
-
-    fn scan_led_node(id_product: &str) -> Result<String, std::io::Error> {
-        let mut enumerator = udev::Enumerator::new()?;
-        enumerator.match_subsystem("hidraw")?;
-
-        for device in enumerator.scan_devices()? {
-            if let Some(parent) = device.parent_with_subsystem_devtype("usb", "usb_device")? {
-                if parent.attribute_value("idProduct").unwrap() == id_product {
-                    // && device.parent().unwrap().sysnum().unwrap() == 3
-                    if let Some(dev_node) = device.devnode() {
-                        info!("Using device at: {:?} for LED control", dev_node);
-                        return Ok(dev_node.to_string_lossy().to_string());
-                    }
-                }
-            }
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::NotFound,
-            "ASUS LED device node not found",
-        );
-        Err(err)
-    }
-
-    fn scan_kbd_node(id_product: &str) -> Result<String, std::io::Error> {
-        let mut enumerator = udev::Enumerator::new()?;
-        enumerator.match_subsystem("input")?;
-        enumerator.match_property("ID_MODEL_ID", id_product)?;
-
-        for device in enumerator.scan_devices()? {
-            if let Some(dev_node) = device.devnode() {
-                if let Some(inum) = device.property_value("ID_USB_INTERFACE_NUM") {
-                    if inum == "02" {
-                        info!("Using device at: {:?} for keyboard polling", dev_node);
-                        return Ok(dev_node.to_string_lossy().to_string());
-                    }
-                }
-            }
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::NotFound,
-            "ASUS N-Key Consumer Device node not found",
-        );
-        Err(err)
-    }
-
-    fn let_bright_check_change(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        let mut file = OpenOptions::new().read(true).open(&self.bright_node)?;
-        let mut buf = [0u8; 1];
-        file.read_exact(&mut buf)?;
-        if let Some(num) = char::from(buf[0]).to_digit(10) {
-            if config.power_profile != num as u8 {
-                config.read();
-                config.kbd_led_brightness = num as u8;
-                config.write();
-            }
-            return Ok(());
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::InvalidData,
-            "LED brightness could not be parsed",
-        );
-        Err(Box::new(err))
-    }
-
-    pub async fn do_command(
-        &mut self,
-        mode: AuraModes,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        self.set_and_save(mode, config).await
-    }
-
-    /// Should only be used if the bytes you are writing are verified correct
-    #[inline]
-    async fn write_bytes(&self, message: &[u8]) -> Result<(), Box<dyn Error>> {
-        if let Ok(mut file) = OpenOptions::new().write(true).open(&self.led_node) {
-            file.write_all(message).unwrap();
-            return Ok(());
-        }
-        Err(Box::new(RogError::NotSupported))
-    }
-
-    /// Write an effect block
-    #[inline]
-    async fn write_effect(&mut self, effect: &[Vec<u8>]) -> Result<(), Box<dyn Error>> {
-        if self.flip_effect_write {
-            for row in effect.iter().rev() {
-                self.write_bytes(row).await?;
-            }
-        } else {
-            for row in effect.iter() {
-                self.write_bytes(row).await?;
-            }
-        }
-        self.flip_effect_write = !self.flip_effect_write;
-        Ok(())
-    }
-
-    /// Used to set a builtin mode and save the settings for it
-    ///
-    /// This needs to be universal so that settings applied by dbus stick
-    #[inline]
-    async fn set_and_save(
-        &mut self,
-        mode: AuraModes,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        match mode {
-            AuraModes::LedBrightness(n) => {
-                let bytes: [u8; LED_MSG_LEN] = (&mode).into();
-                self.write_bytes(&bytes).await?;
-                config.read();
-                config.kbd_led_brightness = n;
-                config.write();
-                info!("LED brightness set to {:#?}", n);
-            }
-            AuraModes::PerKey(v) => {
-                if v.is_empty() || v[0].is_empty() {
-                    let bytes = KeyColourArray::get_init_msg();
-                    self.write_bytes(&bytes).await?;
-                } else {
-                    self.write_effect(&v).await?;
-                }
-            }
-            _ => {
-                config.read();
-                let mode_num: u8 = u8::from(&mode);
-                self.write_mode(&mode).await?;
-                config.kbd_backlight_mode = mode_num;
-                config.set_mode_data(mode);
-                config.write();
-            }
-        }
-        Ok(())
-    }
-
-    #[inline]
-    async fn write_mode(&mut self, mode: &AuraModes) -> Result<(), Box<dyn Error>> {
-        match mode {
-            AuraModes::PerKey(v) => {
-                if v.is_empty() || v[0].is_empty() {
-                    let bytes = KeyColourArray::get_init_msg();
-                    self.write_bytes(&bytes).await?;
-                } else {
-                    self.write_effect(v).await?;
-                }
-            }
-            _ => {
-                let mode_num: u8 = u8::from(mode);
-                match mode {
-                    AuraModes::MultiStatic(_) => {
-                        if self.supported_modes.contains(&mode_num) {
-                            let bytes: [[u8; LED_MSG_LEN]; 4] = mode.into();
-                            for array in bytes.iter() {
-                                self.write_bytes(array).await?;
-                            }
-                        }
-                    }
-                    _ => {
-                        if self.supported_modes.contains(&mode_num) {
-                            let bytes: [u8; LED_MSG_LEN] = mode.into();
-                            self.write_bytes(&bytes).await?;
-                        }
-                    }
-                }
-                self.write_bytes(&LED_SET).await?;
-                // Changes won't persist unless apply is set
-                self.write_bytes(&LED_APPLY).await?;
-            }
-        }
-        Ok(())
-    }
-}

asus-nb-ctrl/src/daemon.rs

@@ -1,253 +0,0 @@
-use daemon::{
-    config::Config, ctrl_anime::CtrlAnimeDisplay, ctrl_charge::CtrlCharge,
-    ctrl_fan_cpu::CtrlFanAndCPU, ctrl_leds::CtrlKbdBacklight, dbus::dbus_create_tree,
-    laptops::match_laptop,
-};
-
-use dbus::{
-    channel::Sender,
-    nonblock::{Process, SyncConnection},
-    tree::Signal,
-};
-use dbus_tokio::connection;
-
-use asus_nb::{DBUS_IFACE, DBUS_NAME, DBUS_PATH};
-use daemon::Controller;
-use log::LevelFilter;
-use log::{error, info, warn};
-use std::error::Error;
-use std::io::Write;
-use std::sync::Arc;
-use tokio::sync::Mutex;
-
-#[tokio::main]
-pub async fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut logger = env_logger::Builder::new();
-    logger
-        .target(env_logger::Target::Stdout)
-        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
-        .init();
-
-    info!("Version: {}", daemon::VERSION);
-    start_daemon().await?;
-    Ok(())
-}
-
-// Timing is such that:
-// - interrupt write is minimum 1ms (sometimes lower)
-// - read interrupt must timeout, minimum of 1ms
-// - for a single usb packet, 2ms total.
-// - to maintain constant times of 1ms, per-key colours should use
-//   the effect endpoint so that the complete colour block is written
-//   as fast as 1ms per row of the matrix inside it. (10ms total time)
-//
-// DBUS processing takes 6ms if not tokiod
-pub async fn start_daemon() -> Result<(), Box<dyn Error>> {
-    let laptop = match_laptop();
-    let mut config = if let Some(laptop) = laptop.as_ref() {
-        Config::default().load(laptop.supported_modes())
-    } else {
-        Config::default().load(&[])
-    };
-
-    let mut led_control = if let Some(laptop) = laptop {
-        CtrlKbdBacklight::new(laptop.usb_product(), laptop.supported_modes().to_owned())
-            .map_or_else(
-                |err| {
-                    error!("{}", err);
-                    None
-                },
-                Some,
-            )
-    } else {
-        None
-    };
-
-    let mut charge_control = CtrlCharge::new().map_or_else(
-        |err| {
-            error!("{}", err);
-            None
-        },
-        Some,
-    );
-
-    let mut fan_control = CtrlFanAndCPU::new().map_or_else(
-        |err| {
-            error!("{}", err);
-            None
-        },
-        Some,
-    );
-
-    // Reload settings
-    if let Some(ctrl) = fan_control.as_mut() {
-        ctrl.reload_from_config(&mut config)
-            .await
-            .unwrap_or_else(|err| warn!("Fan mode: {}", err));
-    }
-
-    if let Some(ctrl) = charge_control.as_mut() {
-        ctrl.reload_from_config(&mut config)
-            .await
-            .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
-    }
-
-    if let Some(ctrl) = led_control.as_mut() {
-        ctrl.reload_from_config(&mut config)
-            .await
-            .unwrap_or_else(|err| warn!("Reload settings: {}", err));
-    }
-
-    let (resource, connection) = connection::new_system_sync()?;
-    tokio::spawn(async {
-        let err = resource.await;
-        panic!("Lost connection to D-Bus: {}", err);
-    });
-
-    connection
-        .request_name(DBUS_NAME, false, true, true)
-        .await?;
-
-    let config = Arc::new(Mutex::new(config));
-    let (
-        tree,
-        aura_command_recv,
-        animatrix_recv,
-        fan_mode_recv,
-        charge_limit_recv,
-        led_changed_signal,
-        fanmode_signal,
-        charge_limit_signal,
-    ) = dbus_create_tree(config.clone());
-
-    // We add the tree to the connection so that incoming method calls will be handled.
-    tree.start_receive_send(&*connection);
-
-    // Send boot signals
-    send_boot_signals(
-        connection.clone(),
-        config.clone(),
-        fanmode_signal.clone(),
-        charge_limit_signal.clone(),
-        led_changed_signal.clone(),
-    )
-    .await?;
-
-    // For helping with processing signals
-    start_signal_task(
-        connection.clone(),
-        config.clone(),
-        fanmode_signal,
-        charge_limit_signal,
-    );
-
-    // Begin all tasks
-    let mut handles = Vec::new();
-    if let Ok(ctrl) = CtrlAnimeDisplay::new() {
-        handles.append(&mut ctrl.spawn_task_loop(config.clone(), animatrix_recv, None, None));
-    }
-
-    if let Some(ctrl) = fan_control.take() {
-        handles.append(&mut ctrl.spawn_task_loop(config.clone(), fan_mode_recv, None, None));
-    }
-
-    if let Some(ctrl) = charge_control.take() {
-        handles.append(&mut ctrl.spawn_task_loop(config.clone(), charge_limit_recv, None, None));
-    }
-
-    if let Some(ctrl) = led_control.take() {
-        handles.append(&mut ctrl.spawn_task_loop(
-            config.clone(),
-            aura_command_recv,
-            Some(connection.clone()),
-            Some(led_changed_signal),
-        ));
-    }
-
-    connection.process_all();
-    for handle in handles {
-        handle.await?;
-    }
-
-    Ok(())
-}
-
-// TODO: Move these in to the controllers tasks
-fn start_signal_task(
-    connection: Arc<SyncConnection>,
-    config: Arc<Mutex<Config>>,
-    fanmode_signal: Arc<Signal<()>>,
-    charge_limit_signal: Arc<Signal<()>>,
-) {
-    tokio::spawn(async move {
-        // Some small things we need to track, without passing all sorts of stuff around
-        let mut last_fan_mode = config.lock().await.power_profile;
-        let mut last_charge_limit = config.lock().await.bat_charge_limit;
-        loop {
-            // Use tokio sleep to not hold up other threads
-            tokio::time::delay_for(std::time::Duration::from_millis(500)).await;
-
-            let config = config.lock().await;
-            if config.power_profile != last_fan_mode {
-                last_fan_mode = config.power_profile;
-                connection
-                    .send(
-                        fanmode_signal
-                            .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                            .append1(last_fan_mode),
-                    )
-                    .unwrap_or_else(|_| 0);
-            }
-
-            if config.bat_charge_limit != last_charge_limit {
-                last_charge_limit = config.bat_charge_limit;
-                connection
-                    .send(
-                        charge_limit_signal
-                            .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                            .append1(last_charge_limit),
-                    )
-                    .unwrap_or_else(|_| 0);
-            }
-        }
-    });
-}
-
-async fn send_boot_signals(
-    connection: Arc<SyncConnection>,
-    config: Arc<Mutex<Config>>,
-    fanmode_signal: Arc<Signal<()>>,
-    charge_limit_signal: Arc<Signal<()>>,
-    led_changed_signal: Arc<Signal<()>>,
-) -> Result<(), Box<dyn Error>> {
-    let config = config.lock().await;
-
-    if let Some(data) = config.get_led_mode_data(config.kbd_backlight_mode) {
-        connection
-            .send(
-                led_changed_signal
-                    .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                    .append1(serde_json::to_string(data)?),
-            )
-            .unwrap_or_else(|_| 0);
-    }
-
-    connection
-        .send(
-            fanmode_signal
-                .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                .append1(config.power_profile),
-        )
-        .unwrap_or_else(|_| 0);
-
-    connection
-        .send(
-            charge_limit_signal
-                .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                .append1(config.bat_charge_limit),
-        )
-        .unwrap_or_else(|_| 0);
-
-    Ok(())
-}

asus-nb-ctrl/src/dbus.rs

@@ -1,235 +0,0 @@
-use crate::config::Config;
-use asus_nb::{aura_modes::AuraModes, DBUS_IFACE, DBUS_PATH};
-use dbus::tree::{Factory, MTSync, Method, MethodErr, Signal, Tree};
-use log::warn;
-use std::sync::Arc;
-use tokio::sync::{
-    mpsc::{channel, Receiver, Sender},
-    Mutex,
-};
-
-fn set_keyboard_backlight(sender: Mutex<Sender<AuraModes>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("SetKeyBacklight", (), {
-            move |m| {
-                let json: &str = m.msg.read1()?;
-                if let Ok(mut lock) = sender.try_lock() {
-                    if let Ok(data) = serde_json::from_str(json) {
-                        lock.try_send(data).unwrap_or_else(|err| {
-                            warn!("SetKeyBacklight over mpsc failed: {}", err)
-                        });
-                    } else {
-                        warn!("SetKeyBacklight could not deserialise");
-                    }
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<&str, _>("json")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-fn get_keyboard_backlight(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetKeyBacklight", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    for mode in &lock.kbd_backlight_modes {
-                        if lock.kbd_backlight_mode == <u8>::from(mode) {
-                            let mode = serde_json::to_string(&mode).unwrap();
-                            let mret = m.msg.method_return().append1(mode);
-                            return Ok(vec![mret]);
-                        }
-                    }
-                    Err(MethodErr::failed(
-                        "Keyboard LED mode set to an invalid mode",
-                    ))
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<&str, _>("json")
-}
-
-fn get_keyboard_backlight_modes(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetKeyBacklightModes", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    let mode = serde_json::to_string(&lock.kbd_backlight_modes).unwrap();
-                    let mret = m.msg.method_return().append1(mode);
-                    Ok(vec![mret])
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<&str, _>("json")
-}
-
-fn set_animatrix(
-    sender: Mutex<Sender<Vec<Vec<u8>>>>, // need mutex only to get interior mutability in MTSync
-) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("AnimatrixWrite", (), {
-            move |m| {
-                let mut iter = m.msg.iter_init();
-                let byte_array: Vec<Vec<u8>> = vec![iter.read()?, iter.read()?];
-                if let Ok(mut lock) = sender.try_lock() {
-                    // Ignore errors if the channel is already full
-                    lock.try_send(byte_array).unwrap_or_else(|_err| {});
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<Vec<u8>, _>("bytearray1")
-        .inarg::<Vec<u8>, _>("bytearray2")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-fn set_fan_mode(sender: Mutex<Sender<u8>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("SetFanMode", (), {
-            move |m| {
-                if let Ok(mut lock) = sender.try_lock() {
-                    let mut iter = m.msg.iter_init();
-                    let byte: u8 = iter.read()?;
-                    lock.try_send(byte).unwrap_or_else(|_err| {});
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<u8, _>("mode")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-fn get_fan_mode(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetFanMode", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    let mret = m.msg.method_return().append1(lock.power_profile);
-                    Ok(vec![mret])
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<u8, _>("mode")
-}
-
-fn get_charge_limit(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetChargeLimit", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    let mret = m.msg.method_return().append1(lock.bat_charge_limit);
-                    Ok(vec![mret])
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<u8, _>("limit")
-}
-
-fn set_charge_limit(sender: Mutex<Sender<u8>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("SetChargeLimit", (), {
-            move |m| {
-                if let Ok(mut lock) = sender.try_lock() {
-                    let mut iter = m.msg.iter_init();
-                    let byte: u8 = iter.read()?;
-                    lock.try_send(byte).unwrap_or_else(|_err| {});
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<u8, _>("limit")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-#[allow(clippy::type_complexity)]
-pub fn dbus_create_tree(
-    config: Arc<Mutex<Config>>,
-) -> (
-    Tree<MTSync, ()>,
-    Receiver<AuraModes>,
-    Receiver<Vec<Vec<u8>>>,
-    Receiver<u8>,
-    Receiver<u8>,
-    Arc<Signal<()>>,
-    Arc<Signal<()>>,
-    Arc<Signal<()>>,
-) {
-    let (aura_command_send, aura_command_recv) = channel::<AuraModes>(1);
-    let (animatrix_send, animatrix_recv) = channel::<Vec<Vec<u8>>>(1);
-    let (fan_mode_send, fan_mode_recv) = channel::<u8>(1);
-    let (charge_send, charge_recv) = channel::<u8>(1);
-
-    let factory = Factory::new_sync::<()>();
-
-    let key_backlight_changed = Arc::new(
-        factory
-            .signal("KeyBacklightChanged", ())
-            .sarg::<&str, _>("json"),
-    );
-    let chrg_limit_changed = Arc::new(
-        factory
-            .signal("ChargeLimitChanged", ())
-            .sarg::<u8, _>("limit"),
-    );
-    let fanmode_changed = Arc::new(factory.signal("FanModeChanged", ()).sarg::<u8, _>("mode"));
-
-    let tree = factory
-        .tree(())
-        .add(
-            factory.object_path(DBUS_PATH, ()).introspectable().add(
-                factory
-                    .interface(DBUS_IFACE, ())
-                    .add_m(set_keyboard_backlight(Mutex::new(aura_command_send)))
-                    .add_m(set_animatrix(Mutex::new(animatrix_send)))
-                    .add_m(set_fan_mode(Mutex::new(fan_mode_send)))
-                    .add_m(set_charge_limit(Mutex::new(charge_send)))
-                    .add_m(get_fan_mode(config.clone()))
-                    .add_m(get_charge_limit(config.clone()))
-                    .add_m(get_keyboard_backlight(config.clone()))
-                    .add_m(get_keyboard_backlight_modes(config))
-                    .add_s(key_backlight_changed.clone())
-                    .add_s(fanmode_changed.clone())
-                    .add_s(chrg_limit_changed.clone()),
-            ),
-        )
-        .add(factory.object_path("/", ()).introspectable());
-    (
-        tree,
-        aura_command_recv,
-        animatrix_recv,
-        fan_mode_recv,
-        charge_recv,
-        key_backlight_changed,
-        fanmode_changed,
-        chrg_limit_changed,
-    )
-}

asus-nb-ctrl/src/error.rs

@@ -1,19 +0,0 @@
-use std::fmt;
-
-#[derive(Debug)]
-pub enum RogError {
-    ParseFanLevel,
-    NotSupported,
-}
-
-impl std::error::Error for RogError {}
-
-impl fmt::Display for RogError {
-    // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        match self {
-            RogError::ParseFanLevel => write!(f, "Parse error"),
-            RogError::NotSupported => write!(f, "Not supported"),
-        }
-    }
-}

asus-nb-ctrl/src/laptops.rs

@@ -1,140 +0,0 @@
-use asus_nb::aura_modes::{AuraModes, BREATHING, STATIC, STROBE};
-use log::{info, warn};
-use serde_derive::{Deserialize, Serialize};
-use std::fs::OpenOptions;
-use std::io::Read;
-
-pub static LEDMODE_CONFIG_PATH: &str = "/etc/asusd/asusd-ledmodes.toml";
-
-static HELP_ADDRESS: &str = "https://gitlab.com/asus-linux/asus-nb-ctrl";
-
-pub struct LaptopBase {
-    usb_product: String,
-    supported_modes: Vec<u8>,
-}
-
-impl LaptopBase {
-    pub fn usb_product(&self) -> &str {
-        &self.usb_product
-    }
-    pub fn supported_modes(&self) -> &[u8] {
-        &self.supported_modes
-    }
-}
-
-pub fn match_laptop() -> Option<LaptopBase> {
-    for device in rusb::devices().unwrap().iter() {
-        let device_desc = device.device_descriptor().unwrap();
-        if device_desc.vendor_id() == 0x0b05 {
-            match device_desc.product_id() {
-                0x1866 => {
-                    let laptop = select_1866_device("1866".to_owned());
-                    print_modes(&laptop.supported_modes);
-                    return Some(laptop);
-                }
-                0x1869 => return Some(select_1866_device("1869".to_owned())),
-                0x1854 => {
-                    info!("Found GL753 or similar");
-                    return Some(LaptopBase {
-                        usb_product: "1854".to_string(),
-                        supported_modes: vec![STATIC, BREATHING, STROBE],
-                    });
-                }
-                _ => {}
-            }
-        }
-    }
-    None
-}
-
-fn select_1866_device(prod: String) -> LaptopBase {
-    let dmi = sysfs_class::DmiId::default();
-    let board_name = dmi.board_name().expect("Could not get board_name");
-    let prod_family = dmi.product_family().expect("Could not get product_family");
-    let prod_name = dmi.product_name().expect("Could not get product_name");
-
-    info!("Product name: {}", prod_name.trim());
-    info!("Board name: {}", board_name.trim());
-
-    let mut laptop = LaptopBase {
-        usb_product: prod,
-        supported_modes: vec![],
-    };
-
-    if let Some(modes) = LEDModeGroup::load_from_config() {
-        if let Some(led_modes) = modes.matcher(&prod_family, &board_name) {
-            laptop.supported_modes = led_modes;
-            return laptop;
-        }
-    }
-
-    warn!(
-        "Unsupported laptop, please request support at {}",
-        HELP_ADDRESS
-    );
-    warn!("Continuing with minimal support");
-
-    laptop
-}
-
-fn print_modes(supported_modes: &[u8]) {
-    if !supported_modes.is_empty() {
-        info!("Supported Keyboard LED modes are:");
-        for mode in supported_modes {
-            let mode = <&str>::from(&<AuraModes>::from(*mode));
-            info!("- {}", mode);
-        }
-        info!(
-            "If these modes are incorrect or missing please request support at {}",
-            HELP_ADDRESS
-        );
-    } else {
-        info!("No RGB control available");
-    }
-}
-
-#[derive(Debug, Deserialize, Serialize)]
-struct LEDModeGroup {
-    led_modes: Vec<LEDModes>,
-}
-
-impl LEDModeGroup {
-    /// Consumes the LEDModes
-    fn matcher(self, prod_family: &str, board_name: &str) -> Option<Vec<u8>> {
-        for led_modes in self.led_modes {
-            if prod_family.contains(&led_modes.prod_family) {
-                for board in led_modes.board_names {
-                    if board_name.contains(&board) {
-                        info!("Matched to {} {}", led_modes.prod_family, board);
-                        return Some(led_modes.led_modes);
-                    }
-                }
-            }
-        }
-        None
-    }
-
-    fn load_from_config() -> Option<Self> {
-        if let Ok(mut file) = OpenOptions::new().read(true).open(&LEDMODE_CONFIG_PATH) {
-            let mut buf = String::new();
-            if let Ok(l) = file.read_to_string(&mut buf) {
-                if l == 0 {
-                    warn!("{} is empty", LEDMODE_CONFIG_PATH);
-                } else {
-                    return Some(toml::from_str(&buf).unwrap_or_else(|_| {
-                        panic!("Could not deserialise {}", LEDMODE_CONFIG_PATH)
-                    }));
-                }
-            }
-        }
-        warn!("Does {} exist?", LEDMODE_CONFIG_PATH);
-        None
-    }
-}
-
-#[derive(Debug, Deserialize, Serialize)]
-struct LEDModes {
-    prod_family: String,
-    board_names: Vec<String>,
-    led_modes: Vec<u8>,
-}

asus-nb-ctrl/src/lib.rs

@@ -1,45 +0,0 @@
-#![deny(unused_must_use)]
-/// Configuration loading, saving
-pub mod config;
-///
-pub mod ctrl_anime;
-///
-pub mod ctrl_charge;
-///
-pub mod ctrl_fan_cpu;
-///
-pub mod ctrl_leds;
-///
-pub mod dbus;
-/// Laptop matching to determine capabilities
-pub mod laptops;
-
-mod error;
-
-use async_trait::async_trait;
-use config::Config;
-use std::error::Error;
-use std::sync::Arc;
-use tokio::sync::{mpsc::Receiver, Mutex};
-use tokio::task::JoinHandle;
-
-pub static VERSION: &str = "1.0.1";
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-
-#[async_trait]
-pub trait Controller {
-    type A;
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>>;
-
-    /// Spawn an infinitely running task (usually) which checks a Receiver for input,
-    /// and may send a signal over dbus
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        recv: Receiver<Self::A>,
-        connection: Option<Arc<SyncConnection>>,
-        signal: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>>;
-}

asus-nb-ctrl/src/main.rs

@@ -1,72 +0,0 @@
-use asus_nb::{
-    cli_options::{LedBrightness, SetAuraBuiltin},
-    core_dbus::AuraDbusClient,
-};
-use daemon::ctrl_fan_cpu::FanLevel;
-use gumdrop::Options;
-use log::LevelFilter;
-use std::io::Write;
-
-#[derive(Options)]
-struct CLIStart {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(help = "show program version number")]
-    version: bool,
-    #[options(meta = "VAL", help = "<off, low, med, high>")]
-    kbd_bright: Option<LedBrightness>,
-    #[options(meta = "PWR", help = "<silent, normal, boost>")]
-    pwr_profile: Option<FanLevel>,
-    #[options(meta = "CHRG", help = "<20-100>")]
-    chg_limit: Option<u8>,
-    #[options(command)]
-    command: Option<Command>,
-}
-
-#[derive(Options)]
-enum Command {
-    #[options(help = "Set the keyboard lighting from built-in modes")]
-    LedMode(LedModeCommand),
-}
-
-#[derive(Options)]
-struct LedModeCommand {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(command, required)]
-    command: Option<SetAuraBuiltin>,
-}
-
-#[tokio::main]
-pub async fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut logger = env_logger::Builder::new();
-    logger
-        .target(env_logger::Target::Stdout)
-        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
-        .init();
-
-    let parsed = CLIStart::parse_args_default_or_exit();
-
-    if parsed.version {
-        println!("Version: {}", daemon::VERSION);
-    }
-
-    let writer = AuraDbusClient::new()?;
-
-    if let Some(Command::LedMode(mode)) = parsed.command {
-        if let Some(command) = mode.command {
-            writer.write_builtin_mode(&command.into())?
-        }
-    }
-    if let Some(brightness) = parsed.kbd_bright {
-        writer.write_brightness(brightness.level())?;
-    }
-    if let Some(fan_level) = parsed.pwr_profile {
-        writer.write_fan_mode(fan_level.into())?;
-    }
-    if let Some(chg_limit) = parsed.chg_limit {
-        writer.write_charge_limit(chg_limit)?;
-    }
-    Ok(())
-}

asus-nb/Cargo.toml

@@ -1,21 +0,0 @@
-[package]
-name = "asus-nb"
-version = "0.15.0"
-license = "MPL-2.0"
-readme = "README.md"
-authors = ["Luke <luke@ljones.dev>"]
-repository = "https://gitlab.com/asus-linux/asus-nb-ctrl"
-homepage = "https://gitlab.com/asus-linux/asus-nb-ctrl"
-description = "A small library of effect types and conversions for ROG Aura"
-edition = "2018"
-
-[dependencies]
-gumdrop = "^0.8"
-dbus = { version = "^0.8" }
-serde = "^1.0"
-serde_derive = "^1.0"
-serde_json = "^1.0"
-yansi-term = "^0.1"
-
-[dev-dependencies]
-tinybmp = "^0.2.3"

asus-nb/examples/animatrix.rs

@@ -1,41 +0,0 @@
-use asus_nb::anime_dbus::AniMeDbusWriter;
-use asus_nb::anime_matrix::{AniMeMatrix, AniMePacketType, HEIGHT, WIDTH};
-use tinybmp::{Bmp, Pixel};
-
-fn main() {
-    let mut writer = AniMeDbusWriter::new().unwrap();
-
-    let bmp =
-        Bmp::from_slice(include_bytes!("non-skewed_r.bmp")).expect("Failed to parse BMP image");
-    let pixels: Vec<Pixel> = bmp.into_iter().collect();
-    //assert_eq!(pixels.len(), 56 * 56);
-
-    // Try an outline, top and right
-    let mut matrix = AniMeMatrix::new();
-
-    // Aligned left
-    for px in pixels {
-        if (px.x as usize / 2) < WIDTH && (px.y as usize) < HEIGHT && px.x % 2 == 0 {
-            matrix.get_mut()[px.y as usize][px.x as usize / 2] = px.color as u8;
-        }
-    }
-
-    // Throw an alignment border up
-    // {
-    //     let tmp = matrix.get_mut();
-    //     for x in tmp[0].iter_mut() {
-    //         *x = 0xff;
-    //     }
-    //     for row in tmp.iter_mut() {
-    //         row[row.len() - 1] = 0xff;
-    //     }
-    // }
-
-    matrix.debug_print();
-
-    let mut matrix: AniMePacketType = AniMePacketType::from(matrix);
-    // println!("{:?}", matrix[0].to_vec());
-    // println!("{:?}", matrix[1].to_vec());
-
-    writer.write_image(&mut matrix).unwrap();
-}

asus-nb/src/anime_dbus.rs

@@ -1,78 +0,0 @@
-use crate::anime_matrix::AniMePacketType;
-use crate::{DBUS_IFACE, DBUS_NAME, DBUS_PATH};
-use dbus::channel::Sender;
-use dbus::{blocking::Connection, Message};
-use std::error::Error;
-use std::sync::{
-    atomic::{AtomicBool, Ordering},
-    Arc,
-};
-use std::{thread, time::Duration};
-
-pub const ANIME_PANE1_PREFIX: [u8; 7] = [0x5e, 0xc0, 0x02, 0x01, 0x00, 0x73, 0x02];
-pub const ANIME_PANE2_PREFIX: [u8; 7] = [0x5e, 0xc0, 0x02, 0x74, 0x02, 0x73, 0x02];
-
-/// Interface for the AniMe dot-matrix display
-///
-/// The resolution is 34x56 (1904) but only 1,215 LEDs in the top-left are used.
-/// The display is available only on select GA401 models.
-///
-/// Actual image ration when displayed is stretched width.
-///
-/// Data structure should be nested array of [[u8; 33]; 56]
-pub struct AniMeDbusWriter {
-    connection: Box<Connection>,
-    block_time: u64,
-    stop: Arc<AtomicBool>,
-}
-
-impl AniMeDbusWriter {
-    #[inline]
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let connection = Connection::new_system()?;
-        Ok(AniMeDbusWriter {
-            connection: Box::new(connection),
-            block_time: 25,
-            stop: Arc::new(AtomicBool::new(false)),
-        })
-    }
-
-    pub fn write_image_to_buf(_buf: &mut AniMePacketType, _image_data: &[u8]) {
-        unimplemented!("Image format is in progress of being worked out")
-    }
-
-    /// Write an Animatrix image
-    ///
-    /// The expected input here is *two* Vectors, 640 bytes in length. The two vectors
-    /// are each one half of the full image write.
-    ///
-    /// After each write a flush is written, it is assumed that this tells the device to
-    /// go ahead and display the written bytes
-    ///
-    /// # Note:
-    /// The vectors are expected to contain the full sequence of bytes as follows
-    ///
-    /// - Write packet 1: 0x5e 0xc0 0x02 0x01 0x00 0x73 0x02 .. <led brightness>
-    /// - Write packet 2: 0x5e 0xc0 0x02 0x74 0x02 0x73 0x02 .. <led brightness>
-    ///
-    /// Where led brightness is 0..255, low to high
-    #[inline]
-    pub fn write_image(&mut self, image: &mut AniMePacketType) -> Result<(), Box<dyn Error>> {
-        if image[0][0] != ANIME_PANE1_PREFIX[0] && image[0][6] != ANIME_PANE1_PREFIX[6] {
-            image[0][..7].copy_from_slice(&ANIME_PANE1_PREFIX);
-        }
-        if image[1][0] != ANIME_PANE2_PREFIX[0] && image[1][6] != ANIME_PANE2_PREFIX[6] {
-            image[1][..7].copy_from_slice(&ANIME_PANE2_PREFIX);
-        }
-
-        let mut msg = Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "AnimatrixWrite")?
-            .append2(image[0].to_vec(), image[1].to_vec());
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        thread::sleep(Duration::from_millis(self.block_time));
-        if self.stop.load(Ordering::Relaxed) {
-            panic!("Got signal to stop!");
-        }
-        Ok(())
-    }
-}

asus-nb/src/anime_matrix.rs

@@ -1,236 +0,0 @@
-pub const WIDTH: usize = 34; // Width is definitely 34 items
-pub const HEIGHT: usize = 56;
-pub type AniMeBufferType = [[u8; WIDTH]; HEIGHT];
-pub type AniMePacketType = [[u8; 640]; 2];
-const BLOCK_START: usize = 7;
-const BLOCK_END: usize = 634;
-use yansi_term::Colour::RGB;
-
-/// Helper structure for writing images.
-///
-///  See the examples for ways to write an image to `AniMeMatrix` format.
-pub struct AniMeMatrix(AniMeBufferType);
-
-impl Default for AniMeMatrix {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-
-impl AniMeMatrix {
-    pub fn new() -> Self {
-        AniMeMatrix([[0u8; WIDTH]; HEIGHT])
-    }
-
-    pub fn get(&self) -> &AniMeBufferType {
-        &self.0
-    }
-
-    pub fn get_mut(&mut self) -> &mut AniMeBufferType {
-        &mut self.0
-    }
-
-    pub fn fill_with(&mut self, fill: u8) {
-        for row in self.0.iter_mut() {
-            for x in row.iter_mut() {
-                *x = fill;
-            }
-        }
-    }
-
-    pub fn debug_print(&self) {
-        // this is the index from right. It is used to progressively shorten rows
-        let mut prog_row_len = WIDTH - 2;
-
-        for (count, row) in self.0.iter().enumerate() {
-            // Write the top block of LEDs (first 7 rows)
-            if count < 6 {
-                if count % 2 != 0 {
-                    print!("     ");
-                } else {
-                    print!("  ");
-                }
-                let tmp = if count == 0 || count == 1 || count == 3 || count == 5 {
-                    row[1..].iter()
-                } else {
-                    row.iter()
-                };
-                for x in tmp {
-                    print!(" {}", RGB(*x, *x, *x).paint(&format!("{:#04X}", x)));
-                }
-
-                println!();
-            } else {
-                // Switch to next block (looks like )
-                if count % 2 != 0 {
-                    // Row after 6 is only 1 less, then rows after 7 follow pattern
-                    if count == 7 {
-                        prog_row_len -= 1;
-                    } else {
-                        prog_row_len -= 2;
-                    }
-                } else {
-                    prog_row_len += 1; // if count 6, 0
-                }
-
-                let index = row.len() - prog_row_len;
-
-                if count % 2 == 0 {
-                    print!("  ");
-                }
-                for (i, x) in row.iter().enumerate() {
-                    if i >= index {
-                        print!(" {}", RGB(*x, *x, *x).paint(&format!("{:#04X}", x)));
-                    } else {
-                        print!("     ");
-                    }
-                }
-                println!();
-            }
-        }
-    }
-}
-
-impl From<AniMeMatrix> for AniMePacketType {
-    /// Do conversion from the nested Vec in AniMeMatrix to the two required
-    /// packets suitable for sending over USB
-    #[inline]
-    fn from(anime: AniMeMatrix) -> Self {
-        let mut buffers = [[0; 640]; 2];
-
-        let mut write_index = BLOCK_START;
-        let mut write_block = &mut buffers[0];
-        let mut block1_done = false;
-
-        // this is the index from right. It is used to progressively shorten rows
-        let mut prog_row_len = WIDTH - 2;
-
-        for (count, row) in anime.0.iter().enumerate() {
-            // Write the top block of LEDs (first 7 rows)
-            if count < 6 {
-                for (i, x) in row.iter().enumerate() {
-                    // Rows 0, 1, 3, 5 are short and misaligned
-                    if count == 0 || count == 1 || count == 3 || count == 5 {
-                        if i > 0 {
-                            write_block[write_index - 1] = *x;
-                        }
-                    } else {
-                        write_block[write_index] = *x;
-                    }
-                    write_index += 1;
-                }
-            } else {
-                // Switch to next block (looks like )
-                if count % 2 != 0 {
-                    // Row after 6 is only 1 less, then rows after 7 follow pattern
-                    if count == 7 {
-                        prog_row_len -= 1;
-                    } else {
-                        prog_row_len -= 2;
-                    }
-                } else {
-                    prog_row_len += 1; // if count 6, 0
-                }
-
-                let index = row.len() - prog_row_len;
-                for n in row.iter().skip(index) {
-                    // Require a special case to catch the correct end-of-packet which is
-                    // 6 bytes from the end
-                    if write_index == BLOCK_END && !block1_done {
-                        block1_done = true;
-                        write_block = &mut buffers[1];
-                        write_index = BLOCK_START;
-                    }
-
-                    write_block[write_index] = *n;
-                    write_index += 1;
-                }
-            }
-        }
-        buffers
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use crate::anime_matrix::{AniMeMatrix, AniMePacketType};
-
-    #[test]
-    fn check_data_alignment() {
-        let mut matrix = AniMeMatrix::new();
-        {
-            let tmp = matrix.get_mut();
-            for row in tmp.iter_mut() {
-                row[row.len() - 1] = 0xff;
-            }
-        }
-
-        let matrix: AniMePacketType = AniMePacketType::from(matrix);
-
-        // The bytes at the right of the initial AniMeMatrix should always end up aligned in the
-        // same place after conversion to data packets
-
-        // Check against manually worked out right align
-        assert_eq!(
-            matrix[0].to_vec(),
-            [
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-            ]
-            .to_vec()
-        );
-        assert_eq!(
-            matrix[1].to_vec(),
-            [
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0,
-                0, 0, 0, 0
-            ]
-            .to_vec()
-        );
-    }
-}

asus-nb/src/aura_modes.rs

@@ -1,287 +0,0 @@
-use crate::cli_options;
-use crate::cli_options::SetAuraBuiltin;
-use serde_derive::{Deserialize, Serialize};
-
-pub const STATIC: u8 = 0x00;
-pub const BREATHING: u8 = 0x01;
-pub const STROBE: u8 = 0x02;
-pub const RAINBOW: u8 = 0x03;
-pub const STAR: u8 = 0x04;
-pub const RAIN: u8 = 0x05;
-pub const HIGHLIGHT: u8 = 0x06;
-pub const LASER: u8 = 0x07;
-pub const RIPPLE: u8 = 0x08;
-pub const PULSE: u8 = 0x0a;
-pub const COMET: u8 = 0x0b;
-pub const FLASH: u8 = 0x0c;
-pub const MULTISTATIC: u8 = 0x0d;
-pub const PER_KEY: u8 = 0xff;
-
-#[derive(Clone, Deserialize, Serialize)]
-pub struct Colour(pub u8, pub u8, pub u8);
-impl From<cli_options::Colour> for Colour {
-    fn from(c: cli_options::Colour) -> Self {
-        Colour(c.0, c.1, c.2)
-    }
-}
-impl Default for Colour {
-    fn default() -> Self {
-        Colour(128, 0, 0)
-    }
-}
-
-#[derive(Copy, Clone, Deserialize, Serialize)]
-pub enum Speed {
-    Low = 0xe1,
-    Med = 0xeb,
-    High = 0xf5,
-}
-impl From<cli_options::Speed> for Speed {
-    fn from(s: cli_options::Speed) -> Self {
-        match s {
-            cli_options::Speed::Low => Speed::Low,
-            cli_options::Speed::Med => Speed::Med,
-            cli_options::Speed::High => Speed::High,
-        }
-    }
-}
-impl Default for Speed {
-    fn default() -> Self {
-        Speed::Med
-    }
-}
-
-/// Used for Rainbow mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Copy, Clone, Deserialize, Serialize)]
-pub enum Direction {
-    Right,
-    Left,
-    Up,
-    Down,
-}
-impl From<cli_options::Direction> for Direction {
-    fn from(s: cli_options::Direction) -> Self {
-        match s {
-            cli_options::Direction::Right => Direction::Right,
-            cli_options::Direction::Left => Direction::Left,
-            cli_options::Direction::Up => Direction::Up,
-            cli_options::Direction::Down => Direction::Down,
-        }
-    }
-}
-impl Default for Direction {
-    fn default() -> Self {
-        Direction::Right
-    }
-}
-
-#[derive(Clone, Default, Deserialize, Serialize)]
-pub struct TwoColourSpeed {
-    pub colour: Colour,
-    pub colour2: Colour,
-    pub speed: Speed,
-}
-impl From<cli_options::TwoColourSpeed> for TwoColourSpeed {
-    fn from(mode: cli_options::TwoColourSpeed) -> Self {
-        TwoColourSpeed {
-            colour: mode.colour.into(),
-            colour2: mode.colour2.into(),
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Clone, Default, Deserialize, Serialize)]
-pub struct SingleSpeed {
-    pub speed: Speed,
-}
-impl From<cli_options::SingleSpeed> for SingleSpeed {
-    fn from(mode: cli_options::SingleSpeed) -> Self {
-        SingleSpeed {
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Clone, Default, Deserialize, Serialize)]
-pub struct SingleColour {
-    pub colour: Colour,
-}
-impl From<cli_options::SingleColour> for SingleColour {
-    fn from(mode: cli_options::SingleColour) -> Self {
-        SingleColour {
-            colour: mode.colour.into(),
-        }
-    }
-}
-
-#[derive(Clone, Default, Deserialize, Serialize)]
-pub struct MultiColour {
-    pub colour1: Colour,
-    pub colour2: Colour,
-    pub colour3: Colour,
-    pub colour4: Colour,
-}
-impl From<cli_options::MultiColour> for MultiColour {
-    fn from(mode: cli_options::MultiColour) -> Self {
-        MultiColour {
-            colour1: mode.colour1.into(),
-            colour2: mode.colour2.into(),
-            colour3: mode.colour3.into(),
-            colour4: mode.colour4.into(),
-        }
-    }
-}
-
-#[derive(Clone, Default, Deserialize, Serialize)]
-pub struct SingleSpeedDirection {
-    pub direction: Direction,
-    pub speed: Speed,
-}
-impl From<cli_options::SingleSpeedDirection> for SingleSpeedDirection {
-    fn from(mode: cli_options::SingleSpeedDirection) -> Self {
-        SingleSpeedDirection {
-            direction: mode.direction.into(),
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Clone, Default, Deserialize, Serialize)]
-pub struct SingleColourSpeed {
-    pub colour: Colour,
-    pub speed: Speed,
-}
-impl From<cli_options::SingleColourSpeed> for SingleColourSpeed {
-    fn from(mode: cli_options::SingleColourSpeed) -> Self {
-        SingleColourSpeed {
-            colour: mode.colour.into(),
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Clone, Deserialize, Serialize)]
-pub enum AuraModes {
-    Static(SingleColour),
-    Breathe(TwoColourSpeed),
-    Strobe(SingleSpeed),
-    Rainbow(SingleSpeedDirection),
-    Star(TwoColourSpeed),
-    Rain(SingleSpeed),
-    Highlight(SingleColourSpeed),
-    Laser(SingleColourSpeed),
-    Ripple(SingleColourSpeed),
-    Pulse(SingleColour),
-    Comet(SingleColour),
-    Flash(SingleColour),
-    MultiStatic(MultiColour),
-    LedBrightness(u8),
-    // TODO: use a serializable structure for this (KeyColourArray)
-    PerKey(Vec<Vec<u8>>),
-}
-
-impl From<SetAuraBuiltin> for AuraModes {
-    fn from(mode: SetAuraBuiltin) -> Self {
-        match mode {
-            SetAuraBuiltin::Static(x) => AuraModes::Static(x.into()),
-            SetAuraBuiltin::Breathe(x) => AuraModes::Breathe(x.into()),
-            SetAuraBuiltin::Strobe(x) => AuraModes::Strobe(x.into()),
-            SetAuraBuiltin::Rainbow(x) => AuraModes::Rainbow(x.into()),
-            SetAuraBuiltin::Star(x) => AuraModes::Star(x.into()),
-            SetAuraBuiltin::Rain(x) => AuraModes::Rain(x.into()),
-            SetAuraBuiltin::Highlight(x) => AuraModes::Highlight(x.into()),
-            SetAuraBuiltin::Laser(x) => AuraModes::Laser(x.into()),
-            SetAuraBuiltin::Ripple(x) => AuraModes::Ripple(x.into()),
-            SetAuraBuiltin::Pulse(x) => AuraModes::Pulse(x.into()),
-            SetAuraBuiltin::Comet(x) => AuraModes::Comet(x.into()),
-            SetAuraBuiltin::Flash(x) => AuraModes::Flash(x.into()),
-            SetAuraBuiltin::MultiStatic(x) => AuraModes::MultiStatic(x.into()),
-        }
-    }
-}
-
-/// Very specific mode conversion required because numbering isn't linear
-impl From<AuraModes> for u8 {
-    fn from(mode: AuraModes) -> Self {
-        u8::from(&mode)
-    }
-}
-
-/// Very specific mode conversion required because numbering isn't linear
-impl From<&mut AuraModes> for u8 {
-    fn from(mode: &mut AuraModes) -> Self {
-        u8::from(&*mode)
-    }
-}
-
-/// Very specific mode conversion required because numbering isn't linear
-impl From<&AuraModes> for u8 {
-    fn from(mode: &AuraModes) -> Self {
-        match mode {
-            AuraModes::Static(_) => STATIC,
-            AuraModes::Breathe(_) => BREATHING,
-            AuraModes::Strobe(_) => STROBE,
-            AuraModes::Rainbow(_) => RAINBOW,
-            AuraModes::Star(_) => STAR,
-            AuraModes::Rain(_) => RAIN,
-            AuraModes::Highlight(_) => HIGHLIGHT,
-            AuraModes::Laser(_) => LASER,
-            AuraModes::Ripple(_) => RIPPLE,
-            AuraModes::Pulse(_) => PULSE,
-            AuraModes::Comet(_) => COMET,
-            AuraModes::Flash(_) => FLASH,
-            AuraModes::MultiStatic(_) => MULTISTATIC,
-            AuraModes::PerKey(_) => PER_KEY,
-            _ => panic!("Invalid mode"),
-        }
-    }
-}
-
-impl From<&AuraModes> for &str {
-    fn from(mode: &AuraModes) -> Self {
-        match mode {
-            AuraModes::Static(_) => "Static",
-            AuraModes::Breathe(_) => "Breathing",
-            AuraModes::Strobe(_) => "Strobing",
-            AuraModes::Rainbow(_) => "Rainbow",
-            AuraModes::Star(_) => "Stars",
-            AuraModes::Rain(_) => "Rain",
-            AuraModes::Highlight(_) => "Keypress Highlight",
-            AuraModes::Laser(_) => "Keypress Laser",
-            AuraModes::Ripple(_) => "Keypress Ripple",
-            AuraModes::Pulse(_) => "Pulse",
-            AuraModes::Comet(_) => "Comet",
-            AuraModes::Flash(_) => "Flash",
-            AuraModes::MultiStatic(_) => "4-Zone Static Colours",
-            AuraModes::PerKey(_) => "RGB per-key",
-            _ => panic!("Invalid mode"),
-        }
-    }
-}
-
-/// Exists to convert back from correct bytes. PER_KEY byte intentionally left off as it
-/// does not correspond to an actual pre-set mode, nor does brightness.
-impl From<u8> for AuraModes {
-    fn from(byte: u8) -> Self {
-        match byte {
-            STATIC => AuraModes::Static(SingleColour::default()),
-            BREATHING => AuraModes::Breathe(TwoColourSpeed::default()),
-            STROBE => AuraModes::Strobe(SingleSpeed::default()),
-            RAINBOW => AuraModes::Rainbow(SingleSpeedDirection::default()),
-            STAR => AuraModes::Star(TwoColourSpeed::default()),
-            RAIN => AuraModes::Rain(SingleSpeed::default()),
-            HIGHLIGHT => AuraModes::Highlight(SingleColourSpeed::default()),
-            LASER => AuraModes::Laser(SingleColourSpeed::default()),
-            RIPPLE => AuraModes::Ripple(SingleColourSpeed::default()),
-            PULSE => AuraModes::Pulse(SingleColour::default()),
-            COMET => AuraModes::Comet(SingleColour::default()),
-            FLASH => AuraModes::Flash(SingleColour::default()),
-            MULTISTATIC => AuraModes::MultiStatic(MultiColour::default()),
-            PER_KEY => AuraModes::PerKey(vec![]),
-            _ => panic!("Invalid mode byte"),
-        }
-    }
-}

asus-nb/src/cli_options.rs

@@ -1,215 +0,0 @@
-use crate::error::AuraError;
-use gumdrop::Options;
-use serde_derive::{Deserialize, Serialize};
-use std::str::FromStr;
-
-#[derive(Options)]
-pub struct LedBrightness {
-    level: u8,
-}
-impl LedBrightness {
-    pub fn level(&self) -> u8 {
-        self.level
-    }
-}
-impl FromStr for LedBrightness {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "off" => Ok(LedBrightness { level: 0x00 }),
-            "low" => Ok(LedBrightness { level: 0x01 }),
-            "med" => Ok(LedBrightness { level: 0x02 }),
-            "high" => Ok(LedBrightness { level: 0x03 }),
-            _ => {
-                println!("Missing required argument, must be one of:\noff,low,med,high\n");
-                Err(AuraError::ParseBrightness)
-            }
-        }
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub struct Colour(pub u8, pub u8, pub u8);
-impl Default for Colour {
-    fn default() -> Self {
-        Colour(255, 0, 0)
-    }
-}
-impl FromStr for Colour {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        if s.len() < 6 {
-            return Err(AuraError::ParseColour);
-        }
-        let r = u8::from_str_radix(&s[0..2], 16).or(Err(AuraError::ParseColour))?;
-        let g = u8::from_str_radix(&s[2..4], 16).or(Err(AuraError::ParseColour))?;
-        let b = u8::from_str_radix(&s[4..6], 16).or(Err(AuraError::ParseColour))?;
-        Ok(Colour(r, g, b))
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub enum Speed {
-    Low = 0xe1,
-    Med = 0xeb,
-    High = 0xf5,
-}
-impl Default for Speed {
-    fn default() -> Self {
-        Speed::Med
-    }
-}
-impl FromStr for Speed {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "low" => Ok(Speed::Low),
-            "med" => Ok(Speed::Med),
-            "high" => Ok(Speed::High),
-            _ => Err(AuraError::ParseSpeed),
-        }
-    }
-}
-
-/// Used for Rainbow mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Deserialize, Serialize)]
-pub enum Direction {
-    Right,
-    Left,
-    Up,
-    Down,
-}
-impl Default for Direction {
-    fn default() -> Self {
-        Direction::Right
-    }
-}
-impl FromStr for Direction {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "right" => Ok(Direction::Right),
-            "up" => Ok(Direction::Up),
-            "down" => Ok(Direction::Down),
-            "left" => Ok(Direction::Left),
-            _ => Err(AuraError::ParseDirection),
-        }
-    }
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct TwoColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the first RGB value e.g, ff00ff")]
-    pub colour: Colour,
-    #[options(no_long, meta = "HEX", help = "set the second RGB value e.g, ff00ff")]
-    pub colour2: Colour,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "WORD", help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleColour {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour: Colour,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct MultiColour {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour1: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour2: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour3: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour4: Colour,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleSpeedDirection {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(
-        no_long,
-        meta = "DIR",
-        help = "set the direction: up, down, left, right"
-    )]
-    pub direction: Direction,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour: Colour,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-/// Byte value for setting the built-in mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Options, Deserialize, Serialize)]
-pub enum SetAuraBuiltin {
-    #[options(help = "set a single static colour")]
-    Static(SingleColour),
-    #[options(help = "pulse between one or two colours")]
-    Breathe(TwoColourSpeed),
-    #[options(help = "strobe through all colours")]
-    Strobe(SingleSpeed),
-    #[options(help = "rainbow cycling in one of four directions")]
-    Rainbow(SingleSpeedDirection),
-    #[options(help = "rain pattern mimicking raindrops")]
-    Star(TwoColourSpeed),
-    #[options(help = "rain pattern of three preset colours")]
-    Rain(SingleSpeed),
-    #[options(help = "pressed keys are highlighted to fade")]
-    Highlight(SingleColourSpeed),
-    #[options(help = "pressed keys generate horizontal laser")]
-    Laser(SingleColourSpeed),
-    #[options(help = "pressed keys ripple outwards like a splash")]
-    Ripple(SingleColourSpeed),
-    #[options(help = "set a rapid pulse")]
-    Pulse(SingleColour),
-    #[options(help = "set a vertical line zooming from left")]
-    Comet(SingleColour),
-    #[options(help = "set a wide vertical line zooming from left")]
-    Flash(SingleColour),
-    #[options(help = "4-zone multi-colour")]
-    MultiStatic(MultiColour),
-}
-
-impl Default for SetAuraBuiltin {
-    fn default() -> Self {
-        SetAuraBuiltin::Static(SingleColour {
-            help: false,
-            colour: Colour(255, 0, 0),
-        })
-    }
-}

asus-nb/src/core_dbus.rs

@@ -1,124 +0,0 @@
-use super::*;
-use crate::fancy::KeyColourArray;
-use dbus::channel::Sender;
-use dbus::{blocking::Connection, channel::Token, Message};
-use std::error::Error;
-use std::sync::{
-    atomic::{AtomicBool, Ordering},
-    Arc,
-};
-use std::{thread, time::Duration};
-
-/// Simplified way to write a effect block
-pub struct AuraDbusClient {
-    connection: Box<Connection>,
-    block_time: u64,
-    stop: Arc<AtomicBool>,
-    stop_token: Token,
-}
-
-impl AuraDbusClient {
-    #[inline]
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let connection = Connection::new_system()?;
-        let stop = Arc::new(AtomicBool::new(false));
-
-        let stopper2 = stop.clone();
-        let match_rule = dbus::message::MatchRule::new_signal(DBUS_IFACE, "KeyBacklightChanged");
-        let stop_token = connection.add_match(match_rule, move |_: (), _, msg| {
-            if msg.read1::<&str>().is_ok() {
-                stopper2.store(true, Ordering::Relaxed);
-            }
-            true
-        })?;
-
-        Ok(AuraDbusClient {
-            connection: Box::new(connection),
-            block_time: 33333,
-            stop,
-            stop_token,
-        })
-    }
-
-    /// This method must always be called before the very first write to initialise
-    /// the keyboard LED EC in the correct mode
-    #[inline]
-    pub fn init_effect(&self) -> Result<(), Box<dyn std::error::Error>> {
-        let mode = AuraModes::PerKey(vec![vec![]]);
-        let mut msg =
-            Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetKeyBacklight")?
-                .append1(serde_json::to_string(&mode)?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    /// Write a single colour block.
-    ///
-    /// Intentionally blocks for 10ms after sending to allow the block to
-    /// be written to the keyboard EC. This should not be async.
-    #[inline]
-    pub fn write_colour_block(
-        &mut self,
-        key_colour_array: &KeyColourArray,
-    ) -> Result<(), Box<dyn Error>> {
-        let group = key_colour_array.get();
-        let mut vecs = Vec::with_capacity(group.len());
-        for v in group {
-            vecs.push(v.to_vec());
-        }
-        let mode = AuraModes::PerKey(vecs);
-        let mut msg =
-            Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetKeyBacklight")?
-                .append1(serde_json::to_string(&mode)?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        thread::sleep(Duration::from_micros(self.block_time));
-        self.connection.process(Duration::from_micros(500))?;
-        if self.stop.load(Ordering::Relaxed) {
-            self.connection.remove_match(self.stop_token)?;
-            println!("Keyboard backlight was changed, exiting");
-            std::process::exit(1)
-        }
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_keyboard_leds(&self, mode: &AuraModes) -> Result<(), Box<dyn std::error::Error>> {
-        let mut msg =
-            Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetKeyBacklight")?
-                .append1(serde_json::to_string(mode)?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_fan_mode(&self, level: u8) -> Result<(), Box<dyn std::error::Error>> {
-        let mut msg = Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetFanMode")?
-            .append1(level);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_charge_limit(&self, level: u8) -> Result<(), Box<dyn std::error::Error>> {
-        let mut msg = Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetChargeLimit")?
-            .append1(level);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_builtin_mode(&self, mode: &AuraModes) -> Result<(), Box<dyn std::error::Error>> {
-        self.write_keyboard_leds(mode)
-    }
-
-    #[inline]
-    pub fn write_brightness(&self, level: u8) -> Result<String, Box<dyn std::error::Error>> {
-        self.write_keyboard_leds(&AuraModes::LedBrightness(level))?;
-        Ok(String::new())
-    }
-}

asus-nb/src/error.rs

@@ -1,20 +0,0 @@
-use std::fmt;
-
-pub enum AuraError {
-    ParseColour,
-    ParseSpeed,
-    ParseDirection,
-    ParseBrightness,
-}
-
-impl fmt::Display for AuraError {
-    // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        match self {
-            AuraError::ParseColour => write!(f, "Could not parse colour"),
-            AuraError::ParseSpeed => write!(f, "Could not parse speed"),
-            AuraError::ParseDirection => write!(f, "Could not parse direction"),
-            AuraError::ParseBrightness => write!(f, "Could not parse brightness"),
-        }
-    }
-}

asus-nb/src/fancy.rs

@@ -1,455 +0,0 @@
-/// A `KeyColourArray` contains all data to change the full set of keyboard
-/// key colours individually.
-///
-/// Each row of the internal array is a full HID packet that can be sent
-/// to the keyboard EC. One row controls one group of keys, these keys are not
-/// necessarily all on the same row of the keyboard, with some splitting between
-/// two rows.
-#[derive(Clone)]
-pub struct KeyColourArray([[u8; 64]; 11]);
-impl Default for KeyColourArray {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-impl KeyColourArray {
-    pub fn new() -> Self {
-        let mut set = [[0u8; 64]; 11];
-        for (count, row) in set.iter_mut().enumerate() {
-            row[0] = 0x5d; // Report ID
-            row[1] = 0xbc; // Mode = custom??, 0xb3 is builtin
-            row[2] = 0x00;
-            row[3] = 0x01; // ??
-            row[4] = 0x01; // ??, 4,5,6 are normally RGB for builtin mode colours
-            row[5] = 0x01; // ??
-            row[6] = (count as u8) << 4; // Key group
-            if count == 10 {
-                row[7] = 0x08; // 0b00001000
-            } else {
-                row[7] = 0x10; // 0b00010000 addressing? flips for group a0
-            }
-            row[8] = 0x00;
-        }
-        KeyColourArray(set)
-    }
-
-    /// Initialise and clear the keyboard for custom effects
-    #[inline]
-    pub fn get_init_msg() -> Vec<u8> {
-        let mut init = vec![0u8; 64];
-        init[0] = 0x5d; // Report ID
-        init[1] = 0xbc; // Mode = custom??, 0xb3 is builtin
-        init
-    }
-
-    #[inline]
-    pub fn set(&mut self, key: Key, r: u8, g: u8, b: u8) {
-        if let Some((rr, gg, bb)) = self.key(key) {
-            *rr = r;
-            *gg = g;
-            *bb = b;
-        }
-    }
-
-    /// Indexes in to `KeyColourArray` at the correct row and column
-    /// to set a series of three bytes to the chosen R,G,B values
-    pub fn key(&mut self, key: Key) -> Option<(&mut u8, &mut u8, &mut u8)> {
-        // Tuples are indexes in to array
-        let (row, col) = match key {
-            Key::VolDown => (0, 15),
-            Key::VolUp => (0, 18),
-            Key::MicMute => (0, 21),
-            Key::ROG => (0, 24),
-            //
-            Key::Esc => (1, 24),
-            Key::F1 => (1, 30),
-            Key::F2 => (1, 33),
-            Key::F3 => (1, 36),
-            Key::F4 => (1, 39),
-            Key::F5 => (1, 45),
-            Key::F6 => (1, 48),
-            Key::F7 => (1, 51),
-            Key::F8 => (1, 54),
-            //
-            Key::F9 => (2, 12),
-            Key::F10 => (2, 15),
-            Key::F11 => (2, 18),
-            Key::F12 => (2, 21),
-            Key::Del => (2, 24),
-            Key::Tilde => (2, 39),
-            Key::N1 => (2, 42),
-            Key::N2 => (2, 45),
-            Key::N3 => (2, 48),
-            Key::N4 => (2, 51),
-            Key::N5 => (2, 54),
-            //
-            Key::N6 => (3, 9),
-            Key::N7 => (3, 12),
-            Key::N8 => (3, 15),
-            Key::N9 => (3, 18),
-            Key::N0 => (3, 21),
-            Key::Hyphen => (3, 24),
-            Key::Equals => (3, 27),
-            Key::BkSpc1 => (3, 30),
-            Key::BkSpc2 => (3, 33),
-            Key::BkSpc3 => (3, 36),
-            Key::Home => (3, 39),
-            Key::Tab => (3, 54),
-            //
-            Key::Q => (4, 9),
-            Key::W => (4, 12),
-            Key::E => (4, 15),
-            Key::R => (4, 18),
-            Key::T => (4, 21),
-            Key::Y => (4, 24),
-            Key::U => (4, 27),
-            Key::I => (4, 30),
-            Key::O => (4, 33),
-            Key::P => (4, 36),
-            Key::LBracket => (4, 39),
-            Key::RBracket => (4, 42),
-            Key::BackSlash => (4, 45),
-            Key::PgUp => (4, 54),
-            //
-            Key::Caps => (5, 21),
-            Key::A => (5, 24),
-            Key::S => (5, 27),
-            Key::D => (5, 30),
-            Key::F => (5, 33),
-            Key::G => (5, 36),
-            Key::H => (5, 39),
-            Key::J => (5, 42),
-            Key::K => (5, 45),
-            Key::L => (5, 48),
-            Key::SemiColon => (5, 51),
-            Key::Quote => (5, 54),
-            //
-            Key::Ret1 => (6, 12),
-            Key::Ret2 => (6, 15),
-            Key::Ret3 => (6, 18),
-            Key::PgDn => (6, 21),
-            Key::LShift => (6, 36),
-            Key::Z => (6, 42),
-            Key::X => (6, 45),
-            Key::C => (6, 48),
-            Key::V => (6, 51),
-            Key::B => (6, 54),
-            //
-            Key::N => (7, 9),
-            Key::M => (7, 12),
-            Key::Comma => (7, 15),
-            Key::Period => (7, 18),
-            Key::FwdSlash => (7, 21),
-            Key::Rshift1 => (7, 27),
-            Key::Rshift2 => (7, 30),
-            Key::Rshift3 => (7, 33),
-            Key::End => (7, 36),
-            Key::LCtrl => (7, 51),
-            Key::LFn => (7, 54),
-            //
-            Key::Meta => (8, 9),
-            Key::LAlt => (8, 12),
-            Key::Space1 => (8, 15),
-            Key::Space2 => (8, 18),
-            Key::Space3 => (8, 21),
-            Key::Space4 => (8, 24),
-            Key::RAlt => (8, 30),
-            Key::PrtSc => (8, 33),
-            Key::RCtrl => (8, 36),
-            Key::Up => (8, 42),
-            Key::RFn => (8, 51),
-            //
-            Key::Left => (9, 54),
-            //
-            Key::Down => (10, 9),
-            Key::Right => (10, 12),
-            Key::None => return None,
-        };
-        // LOLOLOLOLOLOLOL! Look it's safe okay
-        unsafe {
-            Some((
-                &mut *(&mut self.0[row][col] as *mut u8),
-                &mut *(&mut self.0[row][col + 1] as *mut u8),
-                &mut *(&mut self.0[row][col + 2] as *mut u8),
-            ))
-        }
-    }
-
-    #[inline]
-    pub fn get(&self) -> &[[u8; 64]; 11] {
-        &self.0
-    }
-}
-
-#[derive(Debug, PartialEq, Copy, Clone)]
-pub enum Key {
-    VolUp,
-    VolDown,
-    MicMute,
-    ROG,
-    Esc,
-    F1,
-    F2,
-    F3,
-    F4,
-    F5,
-    F6,
-    F7,
-    F8,
-    F9,
-    F10,
-    F11,
-    F12,
-    Del,
-    Tilde,
-    N1,
-    N2,
-    N3,
-    N4,
-    N5,
-    N6,
-    N7,
-    N8,
-    N9,
-    N0,
-    Hyphen,
-    Equals,
-    BkSpc1,
-    BkSpc2,
-    BkSpc3,
-    Home,
-    Tab,
-    Q,
-    W,
-    E,
-    R,
-    T,
-    Y,
-    U,
-    I,
-    O,
-    P,
-    LBracket,
-    RBracket,
-    BackSlash,
-    PgUp,
-    Caps,
-    A,
-    S,
-    D,
-    F,
-    G,
-    H,
-    J,
-    K,
-    L,
-    SemiColon,
-    Quote,
-    Ret1,
-    Ret2,
-    Ret3,
-    PgDn,
-    LShift,
-    Z,
-    X,
-    C,
-    V,
-    B,
-    N,
-    M,
-    Comma,
-    Period,
-    FwdSlash,
-    Rshift1,
-    Rshift2,
-    Rshift3,
-    End,
-    LCtrl,
-    LFn,
-    Meta,
-    LAlt,
-    Space1,
-    Space2,
-    Space3,
-    Space4,
-    RAlt,
-    PrtSc,
-    RCtrl,
-    Up,
-    Down,
-    Left,
-    Right,
-    RFn,
-    None,
-}
-
-pub trait KeyLayout {
-    fn get_rows(&self) -> &Vec<[Key; 17]>;
-}
-
-pub struct GX502Layout(Vec<[Key; 17]>);
-
-impl KeyLayout for GX502Layout {
-    fn get_rows(&self) -> &Vec<[Key; 17]> {
-        &self.0
-    }
-}
-
-impl Default for GX502Layout {
-    fn default() -> Self {
-        GX502Layout(vec![
-            [
-                Key::None,
-                Key::None,
-                Key::VolDown,
-                Key::VolUp,
-                Key::MicMute,
-                Key::ROG,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-            ],
-            [
-                Key::Esc,
-                Key::None,
-                Key::F1,
-                Key::F2,
-                Key::F3,
-                Key::F4,
-                Key::None, // not sure which key to put here
-                Key::F5,
-                Key::F6,
-                Key::F7,
-                Key::F8,
-                Key::F9,
-                Key::F9,
-                Key::F10,
-                Key::F11,
-                Key::F12,
-                Key::Del,
-            ],
-            [
-                Key::Tilde,
-                Key::N1,
-                Key::N2,
-                Key::N3,
-                Key::N4,
-                Key::N5,
-                Key::N6,
-                Key::N7,
-                Key::N8,
-                Key::N9,
-                Key::N0,
-                Key::Hyphen,
-                Key::Equals,
-                Key::BkSpc1,
-                Key::BkSpc2,
-                Key::BkSpc3,
-                Key::Home,
-            ],
-            [
-                Key::Tab,
-                Key::Q,
-                Key::W,
-                Key::E,
-                Key::R,
-                Key::T,
-                Key::Y,
-                Key::U,
-                Key::I,
-                Key::O,
-                Key::P,
-                Key::LBracket,
-                Key::RBracket,
-                Key::BackSlash,
-                Key::BackSlash,
-                Key::BackSlash,
-                Key::PgUp,
-            ],
-            [
-                Key::Caps,
-                Key::A,
-                Key::S,
-                Key::D,
-                Key::F,
-                Key::G,
-                Key::H,
-                Key::J,
-                Key::K,
-                Key::L,
-                Key::SemiColon,
-                Key::Quote,
-                Key::Quote,
-                Key::Ret1,
-                Key::Ret2,
-                Key::Ret3,
-                Key::PgDn,
-            ],
-            [
-                Key::LShift,
-                Key::LShift,
-                Key::Z,
-                Key::X,
-                Key::C,
-                Key::V,
-                Key::B,
-                Key::N,
-                Key::M,
-                Key::Comma,
-                Key::Period,
-                Key::FwdSlash,
-                Key::FwdSlash,
-                Key::Rshift1,
-                Key::Rshift2,
-                Key::Rshift3,
-                Key::End,
-            ],
-            [
-                Key::LCtrl,
-                Key::LFn,
-                Key::Meta,
-                Key::LAlt,
-                Key::Space1,
-                Key::Space2,
-                Key::Space3,
-                Key::Space4,
-                Key::Space4,
-                Key::RAlt,
-                Key::PrtSc,
-                Key::RCtrl,
-                Key::RCtrl,
-                Key::Left,
-                Key::Up,
-                Key::Right,
-                Key::RFn,
-            ],
-            [
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::None,
-                Key::Left,
-                Key::Down,
-                Key::Right,
-                Key::None,
-            ],
-        ])
-    }
-}

asus-nb/src/lib.rs

@@ -1,252 +0,0 @@
-pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
-pub static DBUS_PATH: &str = "/org/asuslinux/Daemon";
-pub static DBUS_IFACE: &str = "org.asuslinux.Daemon";
-pub const LED_MSG_LEN: usize = 17;
-
-pub mod aura_modes;
-use aura_modes::AuraModes;
-
-/// Contains mostly only what is required for parsing CLI options
-pub mod cli_options;
-
-/// Enables you to create fancy RGB effects
-pub mod fancy;
-
-/// The main dbus group for system controls, e.g, fan control, keyboard LED's
-pub mod core_dbus;
-
-/// Specific dbus for writing to the AniMe Matrix display (if supported)
-pub mod anime_dbus;
-
-/// Helper functions for the AniMe display
-pub mod anime_matrix;
-
-pub mod error;
-
-// static LED_INIT1: [u8; 2] = [0x5d, 0xb9];
-// static LED_INIT2: &str = "]ASUS Tech.Inc."; // ] == 0x5d
-// static LED_INIT3: [u8; 6] = [0x5d, 0x05, 0x20, 0x31, 0, 0x08];
-// static LED_INIT4: &str = "^ASUS Tech.Inc."; // ^ == 0x5e
-// static LED_INIT5: [u8; 6] = [0x5e, 0x05, 0x20, 0x31, 0, 0x08];
-
-/// Writes aout the correct byte string for brightness
-///
-/// The HID descriptor looks like:
-///
-/// ```ignore
-/// 0x06, 0x31, 0xFF,  // Usage Page (Vendor Defined 0xFF31)
-/// 0x09, 0x76,        // Usage (0x76)
-/// 0xA1, 0x01,        // Collection (Application)
-/// 0x85, 0x5A,        //   Report ID (90)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x05,        //   Report Count (5)
-/// 0x81, 0x00,        //   Input (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x3F,        //   Report Count (63)
-/// 0xB1, 0x00,        //   Feature (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
-/// 0xC0,              // End Collection
-/// ```
-pub fn aura_brightness_bytes(brightness: u8) -> [u8; 17] {
-    // TODO: check brightness range
-    [
-        0x5A, 0xBA, 0xC5, 0xC4, brightness, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-    ]
-}
-
-/// Parses `AuraCommands` in to packet data
-///
-/// Byte structure:
-///
-/// ```ignore
-/// | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10| 11| 12|
-/// |---|---|---|---|---|---|---|---|---|---|---|---|---|
-/// |5d |b3 |00 |03 |ff |00 |00 |00 |00 |00 |00 |ff |00 |
-/// ```
-///
-/// Bytes 0 and 1 should always be 5d, b3
-///
-/// On multizone laptops byte 2 is the zone number, RGB in usual
-/// place, byte 3 set to zero
-///
-/// Byte 3 sets the mode type:
-/// - 00 = static
-/// - 01 = breathe (can set two colours)
-/// - 02 = strobe (through all colours)
-/// - 03 = rainbow
-/// - 04 = star (byte 9 sets rain colour)
-/// - 05 = rain keys, red, white, turquoise
-/// - 06 = pressed keys light up and fade
-/// - 07 = pressed key emits laser
-/// - 08 = pressed key emits water ripple
-/// - 09 = no effect/not used
-/// - 0a fast pulse (no speed setting)
-/// - 0b vertical line racing to right (no speed setting)
-/// - 0c wider vertical line racing to right (no speed setting)
-///
-/// Bytes 4, 5, 6 are Red, Green, Blue
-///
-/// Byte 7 sets speed from
-/// - 0x00 = Off
-/// - 0xe1 = Slow
-/// - 0xeb = Medium
-/// - 0xf5 = Fast
-///
-/// Byte 8 sets rainbow direction:
-/// - 0x00 = rightwards
-/// - 0x01 = leftwards
-/// - 0x02 = upwards
-/// - 0x03 = downwards
-///
-/// Bytes 10, 11, 12 are Red, Green, Blue for second colour if mode supports it
-///
-/// The HID descriptor looks like:
-/// ```ignore
-/// 0x06, 0x31, 0xFF,  // Usage Page (Vendor Defined 0xFF31)
-/// 0x09, 0x79,        // Usage (0x79)
-/// 0xA1, 0x01,        // Collection (Application)
-/// 0x85, 0x5D,        //   Report ID (93)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x1F,        //   Report Count (31)
-/// 0x81, 0x00,        //   Input (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x3F,        //   Report Count (63)
-/// 0x91, 0x00,        //   Output (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x3F,        //   Report Count (63)
-/// 0xB1, 0x00,        //   Feature (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
-/// 0xC0,              // End Collection
-/// ```
-///
-/// This descriptor is also used for the per-key LED settings
-impl From<&AuraModes> for [u8; LED_MSG_LEN] {
-    fn from(mode: &AuraModes) -> Self {
-        let mut msg = [0u8; LED_MSG_LEN];
-        msg[0] = 0x5d;
-        msg[1] = 0xb3;
-        match mode {
-            AuraModes::LedBrightness(n) => return aura_brightness_bytes(*n),
-            AuraModes::Static(_) => msg[3] = 0x00,
-            AuraModes::Breathe(_) => msg[3] = 0x01,
-            AuraModes::Strobe(_) => msg[3] = 0x02,
-            AuraModes::Rainbow(_) => msg[3] = 0x03,
-            AuraModes::Star(_) => msg[3] = 0x04,
-            AuraModes::Rain(_) => msg[3] = 0x05,
-            AuraModes::Highlight(_) => msg[3] = 0x06,
-            AuraModes::Laser(_) => msg[3] = 0x07,
-            AuraModes::Ripple(_) => msg[3] = 0x08,
-            AuraModes::Pulse(_) => msg[3] = 0x0a,
-            AuraModes::Comet(_) => msg[3] = 0x0b,
-            AuraModes::Flash(_) => msg[3] = 0x0c,
-            _ => panic!("Mode not convertable to 1D array: {}", <&str>::from(mode)),
-        }
-
-        match mode {
-            AuraModes::Rainbow(settings) => {
-                msg[7] = settings.speed as u8;
-                msg[8] = settings.direction as u8;
-            }
-            AuraModes::Star(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-                msg[7] = settings.speed as u8;
-                msg[9] = settings.colour2.2;
-            }
-            AuraModes::Breathe(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-                msg[7] = settings.speed as u8;
-                msg[10] = settings.colour2.0;
-                msg[11] = settings.colour2.1;
-                msg[12] = settings.colour2.2;
-            }
-            AuraModes::Strobe(settings) | AuraModes::Rain(settings) => {
-                msg[7] = settings.speed as u8;
-            }
-            AuraModes::Highlight(settings)
-            | AuraModes::Laser(settings)
-            | AuraModes::Ripple(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-                msg[7] = settings.speed as u8;
-            }
-            AuraModes::Static(settings)
-            | AuraModes::Pulse(settings)
-            | AuraModes::Comet(settings)
-            | AuraModes::Flash(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-            }
-            _ => panic!("Mode not convertable to 1D array: {}", <&str>::from(mode)),
-        }
-        msg
-    }
-}
-
-impl From<AuraModes> for [u8; LED_MSG_LEN] {
-    #[inline]
-    fn from(mode: AuraModes) -> Self {
-        <[u8; LED_MSG_LEN]>::from(&mode)
-    }
-}
-
-impl From<AuraModes> for [[u8; LED_MSG_LEN]; 4] {
-    #[inline]
-    fn from(mode: AuraModes) -> Self {
-        <[[u8; LED_MSG_LEN]; 4]>::from(&mode)
-    }
-}
-
-impl From<&AuraModes> for [[u8; LED_MSG_LEN]; 4] {
-    #[inline]
-    fn from(mode: &AuraModes) -> Self {
-        let mut msg = [[0u8; LED_MSG_LEN]; 4];
-        for (i, row) in msg.iter_mut().enumerate() {
-            row[0] = 0x5d;
-            row[1] = 0xb3;
-            row[2] = i as u8 + 1;
-        }
-
-        match mode {
-            AuraModes::MultiStatic(settings) => {
-                msg[0][4] = settings.colour1.0;
-                msg[0][5] = settings.colour1.1;
-                msg[0][6] = settings.colour1.2;
-                msg[1][4] = settings.colour2.0;
-                msg[1][5] = settings.colour2.1;
-                msg[1][6] = settings.colour2.2;
-                msg[2][4] = settings.colour3.0;
-                msg[2][5] = settings.colour3.1;
-                msg[2][6] = settings.colour3.2;
-                msg[3][4] = settings.colour4.0;
-                msg[3][5] = settings.colour4.1;
-                msg[3][6] = settings.colour4.2;
-            }
-            _ => panic!("Mode not convertable to 2D array: {}", <&str>::from(mode)),
-        }
-        msg
-    }
-}

asusctl/Cargo.toml

@@ -0,0 +1,23 @@
+[package]
+name = "asusctl"
+authors = ["Luke D Jones <luke@ljones.dev>"]
+edition = "2021"
+version.workspace = true
+
+[dependencies]
+rog_anime = { path = "../rog-anime" }
+rog_aura = { path = "../rog-aura" }
+rog_dbus = { path = "../rog-dbus" }
+rog_profiles = { path = "../rog-profiles" }
+rog_platform = { path = "../rog-platform" }
+daemon = { path = "../daemon" }
+
+gumdrop.workspace = true
+toml.workspace = true
+sysfs-class.workspace = true
+
+[dev-dependencies]
+gif.workspace = true
+tinybmp.workspace = true
+glam.workspace = true
+rog_dbus = { path = "../rog-dbus" }

asusctl/examples/anime-diag-png.rs

@@ -0,0 +1,32 @@
+use std::{env, error::Error, path::Path, process::exit};
+
+use rog_anime::{usb::get_anime_type, AnimeDiagonal, AnimeType};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn Error>> {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 3 {
+        println!("Usage: <filepath> <brightness>");
+        println!("e.g, asusctl/examples/doom_large.png 0.8");
+        exit(-1);
+    }
+
+    let matrix = AnimeDiagonal::from_png(
+        Path::new(&args[1]),
+        None,
+        args[2].parse::<f32>().unwrap(),
+        AnimeType::GA401,
+    )?;
+
+    let anime_type = get_anime_type()?;
+
+    client
+        .proxies()
+        .anime()
+        .write(matrix.into_data_buffer(anime_type)?)
+        .unwrap();
+
+    Ok(())
+}

asusctl/examples/anime-diag.rs

@@ -0,0 +1,36 @@
+use std::{thread::sleep, time::Duration};
+
+use rog_anime::{usb::get_anime_type, AnimeDiagonal, AnimeType};
+use rog_dbus::RogDbusClientBlocking;
+
+// In usable data:
+// Top row start at 1, ends at 32
+
+// 74w x 36h diagonal used by the windows app
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    for step in (2..50).rev() {
+        let mut matrix = AnimeDiagonal::new(AnimeType::GA401, None);
+        for c in (0..60).into_iter().step_by(step) {
+            for i in matrix.get_mut().iter_mut() {
+                i[c] = 50;
+            }
+        }
+
+        for c in (0..35).into_iter().step_by(step) {
+            for i in matrix.get_mut()[c].iter_mut() {
+                *i = 50;
+            }
+        }
+
+        let anime_type = get_anime_type().unwrap();
+        client
+            .proxies()
+            .anime()
+            .write(matrix.into_data_buffer(anime_type).unwrap())
+            .unwrap();
+        sleep(Duration::from_millis(300));
+    }
+}

asusctl/examples/anime-gif.rs

@@ -0,0 +1,43 @@
+use std::{env, path::Path, thread::sleep};
+
+use rog_anime::{usb::get_anime_type, ActionData, ActionLoader, Sequences};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 3 {
+        println!("Please supply filepath and brightness");
+        return;
+    }
+
+    let path = Path::new(&args[1]);
+    let brightness = args[2].parse::<f32>().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut seq = Sequences::new(anime_type);
+    seq.insert(
+        0,
+        &ActionLoader::AsusAnimation {
+            file: path.into(),
+            time: rog_anime::AnimTime::Infinite,
+            brightness,
+        },
+    )
+    .unwrap();
+
+    loop {
+        for action in seq.iter() {
+            if let ActionData::Animation(frames) = action {
+                for frame in frames.frames() {
+                    client
+                        .proxies()
+                        .anime()
+                        .write(frame.frame().clone())
+                        .unwrap();
+                    sleep(frame.delay());
+                }
+            }
+        }
+    }
+}

asusctl/examples/anime-grid.rs

@@ -0,0 +1,46 @@
+use rog_anime::{usb::get_anime_type, AnimeDataBuffer, AnimeGrid};
+use rog_dbus::RogDbusClientBlocking;
+use std::convert::TryFrom;
+
+// In usable data:
+// Top row start at 1, ends at 32
+
+// 74w x 36h diagonal used by the windows app
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut matrix = AnimeGrid::new(anime_type);
+    let tmp = matrix.get_mut();
+
+    let mut i = 0;
+    for (y, row) in tmp.iter_mut().enumerate() {
+        if y % 2 == 0 && i + 1 != row.len() - 1 {
+            i += 1;
+            dbg!(i);
+        }
+        row[row.len() - i] = 0x22;
+        if i > 5 {
+            row[row.len() - i + 5] = 0x22;
+        }
+        if i > 10 {
+            row[row.len() - i + 10] = 0x22;
+        }
+
+        if i > 15 {
+            row[row.len() - i + 15] = 0x22;
+        }
+
+        if i > 20 {
+            row[row.len() - i + 20] = 0x22;
+        }
+
+        if i > 25 {
+            row[row.len() - i + 25] = 0x22;
+        }
+    }
+
+    let matrix = <AnimeDataBuffer>::try_from(matrix).unwrap();
+
+    client.proxies().anime().write(matrix).unwrap();
+}

asusctl/examples/anime-outline.rs

@@ -0,0 +1,130 @@
+use rog_anime::{usb::get_anime_type, AnimeDataBuffer};
+use rog_dbus::RogDbusClientBlocking;
+
+// In usable data:
+// Top row start at 1, ends at 32
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut matrix = AnimeDataBuffer::new(anime_type);
+    matrix.data_mut()[1] = 100; // start = 1
+    for n in matrix.data_mut()[2..32].iter_mut() {
+        *n = 250;
+    }
+    matrix.data_mut()[32] = 100; // end
+    matrix.data_mut()[34] = 100; // start x = 0
+    matrix.data_mut()[66] = 100; // end
+    matrix.data_mut()[69] = 100; // start x = 1
+    matrix.data_mut()[101] = 100; // end
+    matrix.data_mut()[102] = 100; // start
+    matrix.data_mut()[134] = 100; // end
+    matrix.data_mut()[137] = 100; // start
+    matrix.data_mut()[169] = 100; // end
+    matrix.data_mut()[170] = 100; // start
+    matrix.data_mut()[202] = 100; // end
+    matrix.data_mut()[204] = 100; // start
+    matrix.data_mut()[236] = 100; // end
+    matrix.data_mut()[237] = 100; // start
+    matrix.data_mut()[268] = 100; // end
+    matrix.data_mut()[270] = 100; // start
+    matrix.data_mut()[301] = 100; // end
+    matrix.data_mut()[302] = 100; // start
+    matrix.data_mut()[332] = 100; // end
+    matrix.data_mut()[334] = 100; // start
+    matrix.data_mut()[364] = 100; // end
+    matrix.data_mut()[365] = 100; // start
+    matrix.data_mut()[394] = 100; // end
+    matrix.data_mut()[396] = 100; // start
+    matrix.data_mut()[425] = 100; // end
+    matrix.data_mut()[426] = 100; // start
+    matrix.data_mut()[454] = 100; // end
+    matrix.data_mut()[456] = 100; // start
+    matrix.data_mut()[484] = 100; // end
+    matrix.data_mut()[485] = 100; // start
+    matrix.data_mut()[512] = 100; // end
+    matrix.data_mut()[514] = 100; // start
+    matrix.data_mut()[541] = 100; // end
+    matrix.data_mut()[542] = 100; // start
+    matrix.data_mut()[568] = 100; // end
+    matrix.data_mut()[570] = 100; // start
+    matrix.data_mut()[596] = 100; // end
+    matrix.data_mut()[597] = 100; // start
+    matrix.data_mut()[622] = 100; // end
+    matrix.data_mut()[624] = 100; // start
+    matrix.data_mut()[649] = 100; // end
+    matrix.data_mut()[650] = 100; // start
+    matrix.data_mut()[674] = 100; // end
+    matrix.data_mut()[676] = 100; // start
+    matrix.data_mut()[700] = 100; // end
+    matrix.data_mut()[701] = 100; // start
+    matrix.data_mut()[724] = 100; // end
+    matrix.data_mut()[726] = 100; // start
+    matrix.data_mut()[749] = 100; // end
+    matrix.data_mut()[750] = 100; // start
+    matrix.data_mut()[772] = 100; // end
+    matrix.data_mut()[774] = 100; // start
+    matrix.data_mut()[796] = 100; // end
+    matrix.data_mut()[797] = 100; // start
+    matrix.data_mut()[818] = 100; // end
+    matrix.data_mut()[820] = 100; // start
+    matrix.data_mut()[841] = 100; // end
+    matrix.data_mut()[842] = 100; // start
+    matrix.data_mut()[862] = 100; // end
+    matrix.data_mut()[864] = 100; // start
+    matrix.data_mut()[884] = 100; // end
+    matrix.data_mut()[885] = 100; // start
+    matrix.data_mut()[904] = 100; // end
+    matrix.data_mut()[906] = 100; // start
+    matrix.data_mut()[925] = 100; // end
+    matrix.data_mut()[926] = 100; // start
+    matrix.data_mut()[944] = 100; // end
+    matrix.data_mut()[946] = 100; // start
+    matrix.data_mut()[964] = 100; // end
+    matrix.data_mut()[965] = 100; // start
+    matrix.data_mut()[982] = 100; // end
+    matrix.data_mut()[984] = 100; // start
+    matrix.data_mut()[1001] = 100; // end
+    matrix.data_mut()[1002] = 100; // start
+    matrix.data_mut()[1018] = 100; // end
+    matrix.data_mut()[1020] = 100; // start
+    matrix.data_mut()[1036] = 100; // end
+    matrix.data_mut()[1037] = 100; // start
+    matrix.data_mut()[1052] = 100; // end
+    matrix.data_mut()[1054] = 100; // start
+    matrix.data_mut()[1069] = 100; // end
+    matrix.data_mut()[1070] = 100; // start
+    matrix.data_mut()[1084] = 100; // end
+    matrix.data_mut()[1086] = 100; // start
+    matrix.data_mut()[1100] = 100; // end
+    matrix.data_mut()[1101] = 100; // start
+    matrix.data_mut()[1114] = 100; // end
+    matrix.data_mut()[1116] = 100; // start
+    matrix.data_mut()[1129] = 100; // end
+    matrix.data_mut()[1130] = 100; // start
+    matrix.data_mut()[1142] = 100; // end
+    matrix.data_mut()[1144] = 100; // start
+    matrix.data_mut()[1156] = 100; // end
+    matrix.data_mut()[1157] = 100; // start
+    matrix.data_mut()[1168] = 100; // end
+    matrix.data_mut()[1170] = 100; // start
+    matrix.data_mut()[1181] = 100; // end
+    matrix.data_mut()[1182] = 100; // start
+    matrix.data_mut()[1192] = 100; // end
+    matrix.data_mut()[1194] = 100; // start
+    matrix.data_mut()[1204] = 100; // end
+    matrix.data_mut()[1205] = 100; // start
+    matrix.data_mut()[1214] = 100; // end
+    matrix.data_mut()[1216] = 100; // start
+    matrix.data_mut()[1225] = 100; // end
+    matrix.data_mut()[1226] = 100; // start
+    matrix.data_mut()[1234] = 100; // end
+    matrix.data_mut()[1236] = 100; // start
+    for n in matrix.data_mut()[1237..1244].iter_mut() {
+        *n = 250;
+    }
+    matrix.data_mut()[1244] = 100; // end
+    println!("{:?}", &matrix);
+
+    client.proxies().anime().write(matrix).unwrap();
+}

asusctl/examples/anime-png.rs

@@ -0,0 +1,40 @@
+use std::convert::TryFrom;
+use std::{env, error::Error, path::Path, process::exit};
+
+use rog_anime::{
+    usb::get_anime_type,
+    AnimeDataBuffer, {AnimeImage, Vec2},
+};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn Error>> {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 7 {
+        println!("Usage: <filepath> <scale> <angle> <x pos> <y pos> <brightness>");
+        println!("e.g, asusctl/examples/doom_large.png 0.9 0.4 0.0 0.0 0.8");
+        exit(-1);
+    }
+
+    let anime_type = get_anime_type()?;
+    let matrix = AnimeImage::from_png(
+        Path::new(&args[1]),
+        args[2].parse::<f32>().unwrap(),
+        args[3].parse::<f32>().unwrap(),
+        Vec2::new(
+            args[4].parse::<f32>().unwrap(),
+            args[5].parse::<f32>().unwrap(),
+        ),
+        args[6].parse::<f32>().unwrap(),
+        anime_type,
+    )?;
+
+    client
+        .proxies()
+        .anime()
+        .write(<AnimeDataBuffer>::try_from(&matrix)?)
+        .unwrap();
+
+    Ok(())
+}

asusctl/examples/anime-spinning.rs

@@ -0,0 +1,49 @@
+use std::convert::TryFrom;
+use std::{
+    env, error::Error, f32::consts::PI, path::Path, process::exit, thread::sleep, time::Duration,
+};
+
+use rog_anime::{
+    usb::get_anime_type,
+    AnimeDataBuffer, {AnimeImage, Vec2},
+};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn Error>> {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 7 {
+        println!("Usage: <filepath> <scale> <angle> <x pos> <y pos> <brightness>");
+        println!("e.g, asusctl/examples/doom_large.png 0.9 0.4 0.0 0.0 0.8");
+        exit(-1);
+    }
+
+    let anime_type = get_anime_type()?;
+    let mut matrix = AnimeImage::from_png(
+        Path::new(&args[1]),
+        args[2].parse::<f32>().unwrap(),
+        args[3].parse::<f32>().unwrap(),
+        Vec2::new(
+            args[4].parse::<f32>().unwrap(),
+            args[5].parse::<f32>().unwrap(),
+        ),
+        args[6].parse::<f32>().unwrap(),
+        anime_type,
+    )?;
+
+    loop {
+        matrix.angle += 0.05;
+        if matrix.angle > PI * 2.0 {
+            matrix.angle = 0.0
+        }
+        matrix.update();
+
+        client
+            .proxies()
+            .anime()
+            .write(<AnimeDataBuffer>::try_from(&matrix)?)
+            .unwrap();
+        sleep(Duration::from_micros(500));
+    }
+}

asusctl/examples/aura-rgb-ball.rs

@@ -0,0 +1,113 @@
+//! Very bad rushed example. The better way to do this would be to have
+//! the balles move on their own square grid, then translate that to the
+//! key layout via shape by pitch etc.
+use rog_aura::{
+    layouts::{KeyLayout, KeyRow},
+    KeyColourArray,
+};
+use rog_dbus::RogDbusClientBlocking;
+use std::collections::LinkedList;
+
+#[derive(Debug, Clone)]
+struct Ball {
+    position: (f32, f32),
+    direction: (f32, f32),
+    trail: LinkedList<(f32, f32)>,
+}
+impl Ball {
+    fn new(x: f32, y: f32, trail_len: u32) -> Self {
+        let mut trail = LinkedList::new();
+        for _ in 1..=trail_len {
+            trail.push_back((x, y));
+        }
+
+        Ball {
+            position: (x, y),
+            direction: (1.0, 1.0),
+            trail,
+        }
+    }
+
+    #[allow(clippy::if_same_then_else)]
+    fn update(&mut self, key_map: &[KeyRow]) {
+        self.position.0 += self.direction.0;
+        self.position.1 += self.direction.1;
+
+        if self.position.1.abs() as usize >= key_map.len() {
+            self.direction.1 *= -1.0;
+            self.position.1 += self.direction.1;
+            self.direction.0 *= -1.0;
+            self.position.0 += self.direction.0;
+        }
+        if self.position.0.abs() as usize >= key_map[self.position.1.abs() as usize].row_ref().len()
+        {
+            self.direction.1 *= -1.0;
+            self.position.1 += self.direction.1;
+        }
+        if self.position.0 as usize >= key_map[self.position.1.abs() as usize].row_ref().len() {
+            self.direction.0 *= -1.0;
+            self.position.0 += self.direction.0;
+        }
+
+        let pos = self.position;
+
+        if pos.1 == key_map[pos.1.abs() as usize].row_ref().len() as f32 - 1.0 || pos.1 <= 0.0 {
+            self.direction.0 *= -1.0;
+        } else if key_map[(pos.1) as usize].row_ref()[(pos.0) as usize].is_placeholder() {
+            self.direction.0 *= -1.0;
+        }
+
+        if pos.0 == key_map.len() as f32 - 1.0 || pos.0 <= 0.0 {
+            self.direction.1 *= -1.0;
+        } else if key_map[(pos.1) as usize].row_ref()[(pos.0) as usize].is_placeholder() {
+            self.direction.1 *= -1.0;
+        }
+
+        self.trail.pop_front();
+        self.trail.push_back(self.position);
+    }
+}
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let (dbus, _) = RogDbusClientBlocking::new()?;
+
+    let mut colours = KeyColourArray::new();
+    let layout = KeyLayout::gx502_layout();
+
+    let mut balls = [Ball::new(2.0, 1.0, 12), Ball::new(5.0, 2.0, 12)];
+    // let mut balls = [Ball::new(2, 1, 12)];
+
+    loop {
+        for (n, ball) in balls.iter_mut().enumerate() {
+            ball.update(layout.rows_ref());
+            for (i, pos) in ball.trail.iter().enumerate() {
+                if let Some(c) = colours
+                    .rgb_for_key(layout.rows_ref()[pos.1.abs() as usize].row_ref()[pos.0 as usize])
+                {
+                    c[0] = 0;
+                    c[1] = 0;
+                    c[2] = 0;
+                    if n == 0 {
+                        c[0] = i as u8 * (255 / ball.trail.len() as u8);
+                    } else if n == 1 {
+                        c[1] = i as u8 * (255 / ball.trail.len() as u8);
+                    } else if n == 2 {
+                        c[2] = i as u8 * (255 / ball.trail.len() as u8);
+                    }
+                };
+            }
+
+            if let Some(c) = colours.rgb_for_key(
+                layout.rows_ref()[ball.position.1.abs() as usize].row_ref()
+                    [ball.position.0 as usize],
+            ) {
+                c[0] = 255;
+                c[1] = 255;
+                c[2] = 255;
+            };
+        }
+        dbus.proxies().led().per_key_raw(colours.get())?;
+
+        std::thread::sleep(std::time::Duration::from_millis(150));
+    }
+}

asusctl/examples/aura-rgb-breathe.rs

@@ -0,0 +1,59 @@
+//! Using a combination of key-colour array plus a key layout to generate outputs.
+
+use rog_aura::{keys::Key, layouts::KeyLayout, Breathe, Colour, Effect, LedType, Sequences, Speed};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let layout = KeyLayout::gx502_layout();
+
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let mut seq = Sequences::new();
+    let mut key = Effect::Breathe(Breathe::new(
+        LedType::Key(Key::W),
+        Colour(255, 127, 0),
+        Colour(127, 0, 255),
+        Speed::Med,
+    ));
+
+    seq.push(key.clone());
+    key.set_led_type(LedType::Key(Key::A));
+    seq.push(key.clone());
+    key.set_led_type(LedType::Key(Key::S));
+    seq.push(key.clone());
+    key.set_led_type(LedType::Key(Key::D));
+    seq.push(key.clone());
+
+    let mut key = Effect::Breathe(Breathe::new(
+        LedType::Key(Key::Q),
+        Colour(127, 127, 127),
+        Colour(127, 255, 255),
+        Speed::Low,
+    ));
+    seq.push(key.clone());
+    key.set_led_type(LedType::Key(Key::E));
+    seq.push(key.clone());
+
+    let mut key = Effect::Breathe(Breathe::new(
+        LedType::Key(Key::N1),
+        Colour(166, 127, 166),
+        Colour(127, 155, 20),
+        Speed::High,
+    ));
+    key.set_led_type(LedType::Key(Key::Tilde));
+    seq.push(key.clone());
+    key.set_led_type(LedType::Key(Key::N2));
+    seq.push(key.clone());
+    key.set_led_type(LedType::Key(Key::N3));
+    seq.push(key.clone());
+    key.set_led_type(LedType::Key(Key::N4));
+    seq.push(key.clone());
+
+    loop {
+        seq.next_state(&layout);
+        let packets = seq.create_packets();
+
+        client.proxies().led().per_key_raw(packets)?;
+        std::thread::sleep(std::time::Duration::from_millis(60));
+    }
+}

asusctl/examples/aura-rgb-iterate-keys.rs

@@ -0,0 +1,34 @@
+//! Using a combination of key-colour array plus a key layout to generate outputs.
+
+use rog_aura::{layouts::KeyLayout, KeyColourArray};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+    let layout = KeyLayout::gx502_layout();
+    loop {
+        let mut key_colours = KeyColourArray::new();
+        for row in layout.rows() {
+            for (k, key) in row.row().enumerate() {
+                if k != 0 {
+                    if let Some(prev) = row.row().nth(k - 1) {
+                        if let Some(c) = key_colours.rgb_for_key(*prev) {
+                            c[0] = 0;
+                        };
+                    }
+                }
+
+                if key.is_placeholder() {
+                    continue;
+                }
+
+                if let Some(c) = key_colours.rgb_for_key(*key) {
+                    c[0] = 255;
+                };
+
+                client.proxies().led().per_key_raw(key_colours.get())?;
+                std::thread::sleep(std::time::Duration::from_millis(100));
+            }
+        }
+    }
+}

asusctl/examples/aura-zoned-breathe.rs

@@ -0,0 +1,44 @@
+//! Using a combination of key-colour array plus a key layout to generate outputs.
+
+use rog_aura::{layouts::KeyLayout, Breathe, Colour, Effect, LedType, PerZone, Sequences, Speed};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let layout = KeyLayout::gx502_layout();
+
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let mut seq = Sequences::new();
+
+    let zone = Effect::Breathe(Breathe::new(
+        LedType::Zone(PerZone::KeyboardLeft),
+        Colour(166, 127, 166),
+        Colour(127, 155, 20),
+        Speed::High,
+    ));
+    seq.push(zone);
+
+    let zone = Effect::Breathe(Breathe::new(
+        LedType::Zone(PerZone::KeyboardCenterLeft),
+        Colour(16, 127, 255),
+        Colour(127, 15, 20),
+        Speed::Low,
+    ));
+    seq.push(zone);
+
+    let zone = Effect::Breathe(Breathe::new(
+        LedType::Zone(PerZone::LightbarRightCorner),
+        Colour(0, 255, 255),
+        Colour(255, 0, 255),
+        Speed::Med,
+    ));
+    seq.push(zone);
+
+    loop {
+        seq.next_state(&layout);
+        let packets = seq.create_packets();
+
+        client.proxies().led().per_key_raw(packets)?;
+        std::thread::sleep(std::time::Duration::from_millis(60));
+    }
+}

asusctl/src/anime_cli.rs

@@ -0,0 +1,103 @@
+use gumdrop::Options;
+
+#[derive(Options)]
+pub struct AnimeCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(
+        meta = "",
+        help = "enable/disable the panel LEDs (does not erase last image)"
+    )]
+    pub enable: Option<bool>,
+    #[options(
+        meta = "",
+        help = "enable/disable system animations (boot/sleep/shutdown)"
+    )]
+    pub boot_enable: Option<bool>,
+    #[options(meta = "", help = "set global AniMe brightness value")]
+    pub brightness: Option<f32>,
+    #[options(help = "clear the display")]
+    pub clear: bool,
+    #[options(command)]
+    pub command: Option<AnimeActions>,
+}
+
+#[derive(Options)]
+pub enum AnimeActions {
+    #[options(help = "display a PNG image")]
+    Image(AnimeImage),
+    #[options(help = "display a diagonal/pixel-perfect PNG")]
+    PixelImage(AnimeImageDiagonal),
+    #[options(help = "display an animated GIF")]
+    Gif(AnimeGif),
+    #[options(help = "display an animated diagonal/pixel-perfect GIF")]
+    PixelGif(AnimeGifDiagonal),
+}
+
+#[derive(Options)]
+pub struct AnimeImage {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "scale 1.0 == normal")]
+    pub scale: f32,
+    #[options(meta = "", default = "0.0", help = "x position (float)")]
+    pub x_pos: f32,
+    #[options(meta = "", default = "0.0", help = "y position (float)")]
+    pub y_pos: f32,
+    #[options(meta = "", default = "0.0", help = "the angle in radians")]
+    pub angle: f32,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+}
+
+#[derive(Options)]
+pub struct AnimeImageDiagonal {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+}
+
+#[derive(Options)]
+pub struct AnimeGif {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "scale 1.0 == normal")]
+    pub scale: f32,
+    #[options(meta = "", default = "0.0", help = "x position (float)")]
+    pub x_pos: f32,
+    #[options(meta = "", default = "0.0", help = "y position (float)")]
+    pub y_pos: f32,
+    #[options(meta = "", default = "0.0", help = "the angle in radians")]
+    pub angle: f32,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+    #[options(
+        meta = "",
+        default = "1",
+        help = "how many loops to play - 0 is infinite"
+    )]
+    pub loops: u32,
+}
+
+#[derive(Options)]
+pub struct AnimeGifDiagonal {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+    #[options(
+        meta = "",
+        default = "1",
+        help = "how many loops to play - 0 is infinite"
+    )]
+    pub loops: u32,
+}

asusctl/src/aura_cli.rs

@@ -0,0 +1,377 @@
+use gumdrop::Options;
+use rog_aura::{error::Error, AuraEffect, AuraModeNum, AuraZone, Colour, Direction, Speed};
+use std::str::FromStr;
+
+#[derive(Options)]
+pub struct LedPowerCommand1 {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "Control if LEDs enabled while awake <true/false>")]
+    pub awake: Option<bool>,
+    #[options(meta = "", help = "Use with awake option <true/false>")]
+    pub keyboard: Option<bool>,
+    #[options(meta = "", help = "Use with awake option <true/false>")]
+    pub lightbar: Option<bool>,
+    #[options(meta = "", help = "Control boot animations <true/false>")]
+    pub boot: Option<bool>,
+    #[options(meta = "", help = "Control suspend animations <true/false>")]
+    pub sleep: Option<bool>,
+}
+
+#[derive(Options)]
+pub struct LedPowerCommand2 {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(command)]
+    pub command: Option<SetAuraEnabled>,
+}
+
+#[derive(Options)]
+pub enum SetAuraEnabled {
+    /// Applies to both old and new models
+    #[options(help = "set <keyboard, logo, lightbar> to enabled while device is awake")]
+    Awake(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to enabled while the device is booting")]
+    Boot(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to animate while the device is suspended")]
+    Sleep(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to animate while the device is shutdown")]
+    Shutdown(AuraEnabled),
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct AuraEnabled {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "<true/false>")]
+    pub keyboard: Option<bool>,
+    #[options(meta = "", help = "<true/false>")]
+    pub logo: Option<bool>,
+    #[options(meta = "", help = "<true/false>")]
+    pub lightbar: Option<bool>,
+    #[options(meta = "", help = "<true/false>")]
+    pub lid: Option<bool>,
+}
+
+// impl FromStr for AuraEnabled {
+//     type Err = Error;
+
+//     fn from_str(s: &str) -> Result<Self, Self::Err> {
+//         let s = s.to_lowercase();
+//         Ok(Self {
+//             help: false,
+//             keyboard: None,
+//             logo: None,
+//             lightbar: None,
+//         })
+//     }
+// }
+
+#[derive(Options)]
+pub struct LedBrightness {
+    level: Option<u32>,
+}
+impl LedBrightness {
+    pub fn new(level: Option<u32>) -> Self {
+        LedBrightness { level }
+    }
+
+    pub fn level(&self) -> Option<u32> {
+        self.level
+    }
+}
+impl FromStr for LedBrightness {
+    type Err = Error;
+
+    fn from_str(s: &str) -> Result<Self, Self::Err> {
+        let s = s.to_lowercase();
+        match s.as_str() {
+            "off" => Ok(LedBrightness { level: Some(0x00) }),
+            "low" => Ok(LedBrightness { level: Some(0x01) }),
+            "med" => Ok(LedBrightness { level: Some(0x02) }),
+            "high" => Ok(LedBrightness { level: Some(0x03) }),
+            _ => {
+                print!("Invalid argument, must be one of: off, low, med, high");
+                Err(Error::ParseBrightness)
+            }
+        }
+    }
+}
+impl ToString for LedBrightness {
+    fn to_string(&self) -> String {
+        let s = match self.level {
+            Some(0x00) => "low",
+            Some(0x01) => "med",
+            Some(0x02) => "high",
+            _ => "unknown",
+        };
+        s.to_string()
+    }
+}
+
+#[derive(Debug, Clone, Options, Default)]
+pub struct SingleSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "WORD", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Options, Default)]
+pub struct SingleSpeedDirection {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the direction: up, down, left, right")]
+    pub direction: Direction,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct SingleColour {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour: Colour,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct SingleColourSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour: Colour,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Options, Default)]
+pub struct TwoColourSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the first RGB value e.g, ff00ff")]
+    pub colour: Colour,
+    #[options(no_long, meta = "", help = "set the second RGB value e.g, ff00ff")]
+    pub colour2: Colour,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct MultiZone {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(short = "a", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour1: Colour,
+    #[options(short = "b", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour2: Colour,
+    #[options(short = "c", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour3: Colour,
+    #[options(short = "d", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour4: Colour,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct MultiColourSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(short = "a", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour1: Colour,
+    #[options(short = "b", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour2: Colour,
+    #[options(short = "c", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour3: Colour,
+    #[options(short = "d", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour4: Colour,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+}
+
+/// Byte value for setting the built-in mode.
+///
+/// Enum corresponds to the required integer value
+///
+// NOTE: The option names here must match those in rog-aura crate
+#[derive(Options)]
+pub enum SetAuraBuiltin {
+    #[options(help = "set a single static colour")]
+    Static(SingleColour),
+    #[options(help = "pulse between one or two colours")]
+    Breathe(TwoColourSpeed),
+    #[options(help = "strobe through all colours")]
+    Strobe(SingleSpeed),
+    #[options(help = "rainbow cycling in one of four directions")]
+    Rainbow(SingleSpeedDirection),
+    #[options(help = "rain pattern mimicking raindrops")]
+    Stars(TwoColourSpeed),
+    #[options(help = "rain pattern of three preset colours")]
+    Rain(SingleSpeed),
+    #[options(help = "pressed keys are highlighted to fade")]
+    Highlight(SingleColourSpeed),
+    #[options(help = "pressed keys generate horizontal laser")]
+    Laser(SingleColourSpeed),
+    #[options(help = "pressed keys ripple outwards like a splash")]
+    Ripple(SingleColourSpeed),
+    #[options(help = "set a rapid pulse")]
+    Pulse(SingleColour),
+    #[options(help = "set a vertical line zooming from left")]
+    Comet(SingleColour),
+    #[options(help = "set a wide vertical line zooming from left")]
+    Flash(SingleColour),
+}
+
+impl Default for SetAuraBuiltin {
+    fn default() -> Self {
+        SetAuraBuiltin::Static(SingleColour::default())
+    }
+}
+
+impl From<&SingleColour> for AuraEffect {
+    fn from(aura: &SingleColour) -> Self {
+        Self {
+            colour1: aura.colour,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SingleSpeed> for AuraEffect {
+    fn from(aura: &SingleSpeed) -> Self {
+        Self {
+            speed: aura.speed,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SingleColourSpeed> for AuraEffect {
+    fn from(aura: &SingleColourSpeed) -> Self {
+        Self {
+            colour1: aura.colour,
+            speed: aura.speed,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&TwoColourSpeed> for AuraEffect {
+    fn from(aura: &TwoColourSpeed) -> Self {
+        Self {
+            colour1: aura.colour,
+            colour2: aura.colour2,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SingleSpeedDirection> for AuraEffect {
+    fn from(aura: &SingleSpeedDirection) -> Self {
+        Self {
+            speed: aura.speed,
+            direction: aura.direction,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SetAuraBuiltin> for AuraEffect {
+    fn from(aura: &SetAuraBuiltin) -> Self {
+        match aura {
+            SetAuraBuiltin::Static(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Static;
+                data
+            }
+            SetAuraBuiltin::Breathe(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Breathe;
+                data
+            }
+            SetAuraBuiltin::Strobe(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Strobe;
+                data
+            }
+            SetAuraBuiltin::Rainbow(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Rainbow;
+                data
+            }
+            SetAuraBuiltin::Stars(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Star;
+                data
+            }
+            SetAuraBuiltin::Rain(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Rain;
+                data
+            }
+            SetAuraBuiltin::Highlight(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Highlight;
+                data
+            }
+            SetAuraBuiltin::Laser(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Laser;
+                data
+            }
+            SetAuraBuiltin::Ripple(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Ripple;
+                data
+            }
+            SetAuraBuiltin::Pulse(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Pulse;
+                data
+            }
+            SetAuraBuiltin::Comet(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Comet;
+                data
+            }
+            SetAuraBuiltin::Flash(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Flash;
+                data
+            }
+        }
+    }
+}

asusctl/src/cli_opts.rs

@@ -0,0 +1,97 @@
+use crate::{
+    anime_cli::AnimeCommand,
+    aura_cli::{LedBrightness, LedPowerCommand1, LedPowerCommand2, SetAuraBuiltin},
+    profiles_cli::{FanCurveCommand, ProfileCommand},
+};
+use gumdrop::Options;
+
+#[derive(Default, Options)]
+pub struct CliStart {
+    #[options(help_flag, help = "print help message")]
+    pub help: bool,
+    #[options(help = "show program version number")]
+    pub version: bool,
+    #[options(help = "show supported functions of this laptop")]
+    pub show_supported: bool,
+    #[options(meta = "", help = "<off, low, med, high>")]
+    pub kbd_bright: Option<LedBrightness>,
+    #[options(help = "Toggle to next keyboard brightness")]
+    pub next_kbd_bright: bool,
+    #[options(help = "Toggle to previous keyboard brightness")]
+    pub prev_kbd_bright: bool,
+    #[options(meta = "", help = "Set your battery charge limit <20-100>")]
+    pub chg_limit: Option<u8>,
+    #[options(command)]
+    pub command: Option<CliCommand>,
+}
+
+#[derive(Options)]
+pub enum CliCommand {
+    #[options(help = "Set the keyboard lighting from built-in modes")]
+    LedMode(LedModeCommand),
+    #[options(help = "Set the LED power states")]
+    LedPow1(LedPowerCommand1),
+    #[options(help = "Set the LED power states")]
+    LedPow2(LedPowerCommand2),
+    #[options(help = "Set or select platform_profile")]
+    Profile(ProfileCommand),
+    #[options(help = "Set, select, or modify fan curves if supported")]
+    FanCurve(FanCurveCommand),
+    #[options(help = "Set the graphics mode (obsoleted by supergfxctl)")]
+    Graphics(GraphicsCommand),
+    #[options(name = "anime", help = "Manage AniMe Matrix")]
+    Anime(AnimeCommand),
+    #[options(help = "Change bios settings")]
+    Bios(BiosCommand),
+}
+
+#[derive(Options)]
+pub struct LedModeCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(help = "switch to next aura mode")]
+    pub next_mode: bool,
+    #[options(help = "switch to previous aura mode")]
+    pub prev_mode: bool,
+    #[options(command)]
+    pub command: Option<SetAuraBuiltin>,
+}
+
+#[derive(Options)]
+pub struct GraphicsCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+}
+
+#[derive(Options, Debug)]
+pub struct BiosCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(
+        meta = "",
+        short = "S",
+        no_long,
+        help = "set bios POST sound: asusctl -p <true/false>"
+    )]
+    pub post_sound_set: Option<bool>,
+    #[options(no_long, short = "s", help = "read bios POST sound")]
+    pub post_sound_get: bool,
+    #[options(
+        meta = "",
+        short = "D",
+        no_long,
+        help = "Switch GPU MUX mode: 0 = Discrete, 1 = Optimus, reboot required"
+    )]
+    pub gpu_mux_mode_set: Option<u8>,
+    #[options(no_long, short = "d", help = "get GPU mode")]
+    pub gpu_mux_mode_get: bool,
+    #[options(
+        meta = "",
+        short = "O",
+        no_long,
+        help = "Set device panel overdrive <true/false>"
+    )]
+    pub panel_overdrive_set: Option<bool>,
+    #[options(no_long, short = "o", help = "get panel overdrive")]
+    pub panel_overdrive_get: bool,
+}

asusctl/src/main.rs

@@ -0,0 +1,835 @@
+use std::convert::TryFrom;
+use std::process::Command;
+use std::thread::sleep;
+use std::{env::args, path::Path};
+
+use aura_cli::{LedPowerCommand1, LedPowerCommand2};
+use gumdrop::{Opt, Options};
+
+use anime_cli::{AnimeActions, AnimeCommand};
+use profiles_cli::{FanCurveCommand, ProfileCommand};
+use rog_anime::usb::get_anime_type;
+use rog_anime::{AnimTime, AnimeDataBuffer, AnimeDiagonal, AnimeGif, AnimeImage, Vec2};
+
+use rog_aura::usb::{AuraDev1866, AuraDev19b6, AuraDevTuf, AuraDevice, AuraPowerDev};
+use rog_aura::{self, AuraEffect};
+use rog_dbus::RogDbusClientBlocking;
+use rog_platform::platform::GpuMode;
+use rog_platform::supported::*;
+use rog_profiles::error::ProfileError;
+
+use crate::aura_cli::LedBrightness;
+use crate::cli_opts::*;
+
+mod anime_cli;
+mod aura_cli;
+mod cli_opts;
+mod profiles_cli;
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let args: Vec<String> = args().skip(1).collect();
+
+    let missing_argument_k = gumdrop::Error::missing_argument(Opt::Short('k'));
+    let parsed = match CliStart::parse_args_default(&args) {
+        Ok(p) => p,
+        Err(err) if err.to_string() == missing_argument_k.to_string() => CliStart {
+            kbd_bright: Some(LedBrightness::new(None)),
+            ..Default::default()
+        },
+        Err(err) => {
+            eprintln!("source {}", err);
+            std::process::exit(2);
+        }
+    };
+
+    let (dbus, _) = RogDbusClientBlocking::new()
+        .map_err(|e| {
+            print_error_help(Box::new(e), None);
+            std::process::exit(3);
+        })
+        .unwrap();
+
+    let supported = dbus
+        .proxies()
+        .supported()
+        .supported_functions()
+        .map_err(|e| {
+            print_error_help(Box::new(e), None);
+            std::process::exit(4);
+        })
+        .unwrap();
+
+    if parsed.version {
+        print_versions();
+        println!();
+        print_laptop_info();
+        return Ok(());
+    }
+
+    if let Err(err) = do_parsed(&parsed, &supported, &dbus) {
+        print_error_help(err, Some(&supported));
+    }
+
+    Ok(())
+}
+
+fn print_error_help(err: Box<dyn std::error::Error>, supported: Option<&SupportedFunctions>) {
+    check_service("asusd");
+    println!("\nError: {}\n", err);
+    print_versions();
+    println!();
+    print_laptop_info();
+    if let Some(supported) = supported {
+        println!();
+        println!("Supported laptop functions:\n\n{}", supported);
+    }
+}
+
+fn print_versions() {
+    println!("App and daemon versions:");
+    println!("      asusctl v{}", env!("CARGO_PKG_VERSION"));
+    println!("        asusd v{}", daemon::VERSION);
+    println!("\nComponent crate versions:");
+    println!("    rog-anime v{}", rog_anime::VERSION);
+    println!("     rog-aura v{}", rog_aura::VERSION);
+    println!("     rog-dbus v{}", rog_dbus::VERSION);
+    println!(" rog-profiles v{}", rog_profiles::VERSION);
+    println!("rog-platform v{}", rog_platform::VERSION);
+}
+
+fn print_laptop_info() {
+    let dmi = sysfs_class::DmiId::default();
+    let board_name = dmi.board_name().expect("Could not get board_name");
+    let prod_family = dmi.product_family().expect("Could not get product_family");
+
+    println!("Product family: {}", prod_family.trim());
+    println!("Board name: {}", board_name.trim());
+}
+
+fn check_service(name: &str) -> bool {
+    if name != "asusd" && !check_systemd_unit_enabled(name) {
+        println!(
+            "\n\x1b[0;31m{} is not enabled, enable it with `systemctl enable {}\x1b[0m",
+            name, name
+        );
+        return true;
+    } else if !check_systemd_unit_active(name) {
+        println!(
+            "\n\x1b[0;31m{} is not running, start it with `systemctl start {}\x1b[0m",
+            name, name
+        );
+        return true;
+    }
+    false
+}
+
+fn do_parsed(
+    parsed: &CliStart,
+    supported: &SupportedFunctions,
+    dbus: &RogDbusClientBlocking,
+) -> Result<(), Box<dyn std::error::Error>> {
+    match &parsed.command {
+        Some(CliCommand::LedMode(mode)) => handle_led_mode(dbus, &supported.keyboard_led, mode)?,
+        Some(CliCommand::LedPow1(pow)) => handle_led_power1(dbus, &supported.keyboard_led, pow)?,
+        Some(CliCommand::LedPow2(pow)) => handle_led_power2(dbus, &supported.keyboard_led, pow)?,
+        Some(CliCommand::Profile(cmd)) => handle_profile(dbus, &supported.platform_profile, cmd)?,
+        Some(CliCommand::FanCurve(cmd)) => {
+            handle_fan_curve(dbus, &supported.platform_profile, cmd)?
+        }
+        Some(CliCommand::Graphics(_)) => do_gfx()?,
+        Some(CliCommand::Anime(cmd)) => handle_anime(dbus, &supported.anime_ctrl, cmd)?,
+        Some(CliCommand::Bios(cmd)) => handle_bios_option(dbus, &supported.rog_bios_ctrl, cmd)?,
+        None => {
+            if (!parsed.show_supported
+                && parsed.kbd_bright.is_none()
+                && parsed.chg_limit.is_none()
+                && !parsed.next_kbd_bright
+                && !parsed.prev_kbd_bright)
+                || parsed.help
+            {
+                println!("{}", CliStart::usage());
+                println!();
+                if let Some(cmdlist) = CliStart::command_list() {
+                    let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+                    for command in commands.iter().filter(|command| {
+                        if !matches!(
+                            supported.keyboard_led.prod_id,
+                            AuraDevice::X1854
+                                | AuraDevice::X1869
+                                | AuraDevice::X1866
+                                | AuraDevice::Tuf
+                        ) && command.trim().starts_with("led-pow-1")
+                        {
+                            return false;
+                        }
+                        if supported.keyboard_led.prod_id != AuraDevice::X19B6
+                            && command.trim().starts_with("led-pow-2")
+                        {
+                            return false;
+                        }
+                        true
+                    }) {
+                        println!("{}", command);
+                    }
+                }
+
+                println!("\nExtra help can be requested on any command or subcommand:");
+                println!(" asusctl led-mode --help");
+                println!(" asusctl led-mode static --help");
+            }
+        }
+    }
+
+    if let Some(brightness) = &parsed.kbd_bright {
+        match brightness.level() {
+            None => {
+                let level = dbus.proxies().led().led_brightness()?;
+                println!("Current keyboard led brightness: {}", level);
+            }
+            Some(level) => dbus
+                .proxies()
+                .led()
+                .set_brightness(<rog_aura::LedBrightness>::from(level))?,
+        }
+    }
+
+    if parsed.next_kbd_bright {
+        dbus.proxies().led().next_led_brightness()?;
+    }
+
+    if parsed.prev_kbd_bright {
+        dbus.proxies().led().prev_led_brightness()?;
+    }
+
+    if parsed.show_supported {
+        println!("Supported laptop functions:\n\n{}", supported);
+    }
+
+    if let Some(chg_limit) = parsed.chg_limit {
+        dbus.proxies()
+            .charge()
+            .set_charge_control_end_threshold(chg_limit)?;
+    }
+
+    Ok(())
+}
+
+fn do_gfx() -> Result<(), Box<dyn std::error::Error>> {
+    println!("Please use supergfxctl for graphics switching. supergfxctl is the result of making asusctl graphics switching generic so all laptops can use it");
+    println!("This command will be removed in future");
+    Ok(())
+}
+
+fn handle_anime(
+    dbus: &RogDbusClientBlocking,
+    _supported: &AnimeSupportedFunctions,
+    cmd: &AnimeCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if (cmd.command.is_none()
+        && cmd.enable.is_none()
+        && cmd.boot_enable.is_none()
+        && cmd.brightness.is_none())
+        || cmd.help
+    {
+        println!("Missing arg or command\n\n{}", cmd.self_usage());
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+    }
+    if let Some(anime_turn) = cmd.enable {
+        dbus.proxies().anime().set_on_off(anime_turn)?
+    }
+    if let Some(anime_boot) = cmd.boot_enable {
+        dbus.proxies().anime().set_boot_on_off(anime_boot)?
+    }
+    if let Some(bright) = cmd.brightness {
+        verify_brightness(bright);
+        dbus.proxies().anime().set_brightness(bright)?
+    }
+    if cmd.clear {
+        let anime_type = get_anime_type()?;
+        let data = vec![0u8; anime_type.data_length()];
+        let tmp = AnimeDataBuffer::from_vec(anime_type, data)?;
+        dbus.proxies().anime().write(tmp)?;
+    }
+
+    if let Some(action) = cmd.command.as_ref() {
+        let anime_type = get_anime_type()?;
+        match action {
+            AnimeActions::Image(image) => {
+                if image.help_requested() || image.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", image.self_usage());
+                    if let Some(lst) = image.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(image.bright);
+
+                let matrix = AnimeImage::from_png(
+                    Path::new(&image.path),
+                    image.scale,
+                    image.angle,
+                    Vec2::new(image.x_pos, image.y_pos),
+                    image.bright,
+                    anime_type,
+                )?;
+
+                dbus.proxies()
+                    .anime()
+                    .write(<AnimeDataBuffer>::try_from(&matrix)?)?;
+            }
+            AnimeActions::PixelImage(image) => {
+                if image.help_requested() || image.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", image.self_usage());
+                    if let Some(lst) = image.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(image.bright);
+
+                let matrix = AnimeDiagonal::from_png(
+                    Path::new(&image.path),
+                    None,
+                    image.bright,
+                    anime_type,
+                )?;
+
+                dbus.proxies()
+                    .anime()
+                    .write(matrix.into_data_buffer(anime_type)?)?;
+            }
+            AnimeActions::Gif(gif) => {
+                if gif.help_requested() || gif.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", gif.self_usage());
+                    if let Some(lst) = gif.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(gif.bright);
+
+                let matrix = AnimeGif::from_gif(
+                    Path::new(&gif.path),
+                    gif.scale,
+                    gif.angle,
+                    Vec2::new(gif.x_pos, gif.y_pos),
+                    AnimTime::Count(1),
+                    gif.bright,
+                    anime_type,
+                )?;
+
+                let mut loops = gif.loops as i32;
+                loop {
+                    for frame in matrix.frames() {
+                        dbus.proxies().anime().write(frame.frame().clone())?;
+                        sleep(frame.delay());
+                    }
+                    if loops >= 0 {
+                        loops -= 1;
+                    }
+                    if loops == 0 {
+                        break;
+                    }
+                }
+            }
+            AnimeActions::PixelGif(gif) => {
+                if gif.help_requested() || gif.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", gif.self_usage());
+                    if let Some(lst) = gif.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(gif.bright);
+
+                let matrix = AnimeGif::from_diagonal_gif(
+                    Path::new(&gif.path),
+                    AnimTime::Count(1),
+                    gif.bright,
+                    anime_type,
+                )?;
+
+                let mut loops = gif.loops as i32;
+                loop {
+                    for frame in matrix.frames() {
+                        dbus.proxies().anime().write(frame.frame().clone())?;
+                        sleep(frame.delay());
+                    }
+                    if loops >= 0 {
+                        loops -= 1;
+                    }
+                    if loops == 0 {
+                        break;
+                    }
+                }
+            }
+        }
+    }
+    Ok(())
+}
+
+fn verify_brightness(brightness: f32) {
+    if !(0.0..=1.0).contains(&brightness) {
+        println!(
+            "Image and global brightness must be between 0.0 and 1.0 (inclusive), was {}",
+            brightness
+        );
+        std::process::exit(1);
+    }
+}
+
+fn handle_led_mode(
+    dbus: &RogDbusClientBlocking,
+    supported: &LedSupportedFunctions,
+    mode: &LedModeCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if mode.command.is_none() && !mode.prev_mode && !mode.next_mode {
+        if !mode.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", mode.self_usage());
+        println!("Commands available");
+
+        if let Some(cmdlist) = LedModeCommand::command_list() {
+            let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+            for command in commands.iter().filter(|command| {
+                for mode in &supported.stock_led_modes {
+                    if command
+                        .trim()
+                        .starts_with(&<&str>::from(mode).to_lowercase())
+                    {
+                        return true;
+                    }
+                }
+                if !supported.multizone_led_mode.is_empty() && command.trim().starts_with("multi") {
+                    return true;
+                }
+                false
+            }) {
+                println!("{}", command);
+            }
+        }
+
+        println!("\nHelp can also be requested on modes, e.g: static --help");
+        return Ok(());
+    }
+
+    if mode.next_mode && mode.prev_mode {
+        println!("Please specify either next or previous");
+        return Ok(());
+    }
+    if mode.next_mode {
+        dbus.proxies().led().next_led_mode()?;
+    } else if mode.prev_mode {
+        dbus.proxies().led().prev_led_mode()?;
+    } else if let Some(mode) = mode.command.as_ref() {
+        if mode.help_requested() {
+            println!("{}", mode.self_usage());
+            return Ok(());
+        }
+        dbus.proxies()
+            .led()
+            .set_led_mode(&<AuraEffect>::from(mode))?;
+    }
+
+    Ok(())
+}
+
+fn handle_led_power1(
+    dbus: &RogDbusClientBlocking,
+    supported: &LedSupportedFunctions,
+    power: &LedPowerCommand1,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if power.awake.is_none()
+        && power.sleep.is_none()
+        && power.boot.is_none()
+        && power.keyboard.is_none()
+        && power.lightbar.is_none()
+    {
+        if !power.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", power.self_usage());
+        return Ok(());
+    }
+
+    if matches!(
+        supported.prod_id,
+        AuraDevice::X1854 | AuraDevice::X1869 | AuraDevice::X1866
+    ) {
+        handle_led_power_1_do_1866(dbus, power)?;
+        return Ok(());
+    }
+
+    if matches!(supported.prod_id, AuraDevice::Tuf) {
+        handle_led_power_1_do_tuf(dbus, power)?;
+        return Ok(());
+    }
+
+    println!("These options are for keyboards of product ID 0x1866 or TUF only");
+    Ok(())
+}
+
+fn handle_led_power_1_do_1866(
+    dbus: &RogDbusClientBlocking,
+    power: &LedPowerCommand1,
+) -> Result<(), Box<dyn std::error::Error>> {
+    let mut enabled: Vec<AuraDev1866> = Vec::new();
+    let mut disabled: Vec<AuraDev1866> = Vec::new();
+
+    let mut check = |e: Option<bool>, a: AuraDev1866| {
+        if let Some(arg) = e {
+            if arg {
+                enabled.push(a);
+            } else {
+                disabled.push(a);
+            }
+        }
+    };
+
+    check(power.awake, AuraDev1866::Awake);
+    check(power.boot, AuraDev1866::Boot);
+    check(power.sleep, AuraDev1866::Sleep);
+    check(power.keyboard, AuraDev1866::Keyboard);
+    check(power.lightbar, AuraDev1866::Lightbar);
+
+    let data = AuraPowerDev {
+        x1866: enabled,
+        x19b6: vec![],
+        tuf: vec![],
+    };
+    dbus.proxies().led().set_leds_power(data, true)?;
+
+    let data = AuraPowerDev {
+        x1866: disabled,
+        x19b6: vec![],
+        tuf: vec![],
+    };
+    dbus.proxies().led().set_leds_power(data, false)?;
+
+    Ok(())
+}
+
+fn handle_led_power_1_do_tuf(
+    dbus: &RogDbusClientBlocking,
+    power: &LedPowerCommand1,
+) -> Result<(), Box<dyn std::error::Error>> {
+    let mut enabled: Vec<AuraDevTuf> = Vec::new();
+    let mut disabled: Vec<AuraDevTuf> = Vec::new();
+
+    let mut check = |e: Option<bool>, a: AuraDevTuf| {
+        if let Some(arg) = e {
+            if arg {
+                enabled.push(a);
+            } else {
+                disabled.push(a);
+            }
+        }
+    };
+
+    check(power.awake, AuraDevTuf::Awake);
+    check(power.boot, AuraDevTuf::Boot);
+    check(power.sleep, AuraDevTuf::Sleep);
+    check(power.keyboard, AuraDevTuf::Keyboard);
+
+    let data = AuraPowerDev {
+        x1866: vec![],
+        x19b6: vec![],
+        tuf: enabled,
+    };
+    dbg!(&data);
+    dbus.proxies().led().set_leds_power(data, true)?;
+
+    let data = AuraPowerDev {
+        x1866: vec![],
+        x19b6: vec![],
+        tuf: disabled,
+    };
+    dbus.proxies().led().set_leds_power(data, false)?;
+
+    Ok(())
+}
+
+fn handle_led_power2(
+    dbus: &RogDbusClientBlocking,
+    supported: &LedSupportedFunctions,
+    power: &LedPowerCommand2,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if power.command().is_none() {
+        if !power.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", power.self_usage());
+        println!("Commands available");
+
+        if let Some(cmdlist) = LedPowerCommand2::command_list() {
+            let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+            for command in commands.iter() {
+                println!("{}", command);
+            }
+        }
+
+        println!("\nHelp can also be requested on commands, e.g: boot --help");
+        return Ok(());
+    }
+
+    if let Some(pow) = power.command.as_ref() {
+        if pow.help_requested() {
+            println!("{}", pow.self_usage());
+            return Ok(());
+        }
+
+        if supported.prod_id != AuraDevice::X19B6 {
+            println!("This option applies only to keyboards with product ID 0x19b6")
+        }
+
+        let mut enabled: Vec<AuraDev19b6> = Vec::new();
+        let mut disabled: Vec<AuraDev19b6> = Vec::new();
+        let mut check = |e: Option<bool>, a: AuraDev19b6| {
+            if let Some(arg) = e {
+                if arg {
+                    enabled.push(a);
+                } else {
+                    disabled.push(a);
+                }
+            }
+        };
+
+        match pow {
+            aura_cli::SetAuraEnabled::Boot(arg) => {
+                check(arg.keyboard, AuraDev19b6::BootKeyb);
+                check(arg.logo, AuraDev19b6::BootLogo);
+                check(arg.lightbar, AuraDev19b6::BootBar);
+                check(arg.lid, AuraDev19b6::AwakeLid);
+            }
+            aura_cli::SetAuraEnabled::Sleep(arg) => {
+                check(arg.keyboard, AuraDev19b6::SleepKeyb);
+                check(arg.logo, AuraDev19b6::SleepLogo);
+                check(arg.lightbar, AuraDev19b6::SleepBar);
+                check(arg.lid, AuraDev19b6::SleepLid);
+            }
+            aura_cli::SetAuraEnabled::Awake(arg) => {
+                check(arg.keyboard, AuraDev19b6::AwakeKeyb);
+                check(arg.logo, AuraDev19b6::AwakeLogo);
+                check(arg.lightbar, AuraDev19b6::AwakeBar);
+                check(arg.lid, AuraDev19b6::AwakeLid);
+            }
+            aura_cli::SetAuraEnabled::Shutdown(arg) => {
+                check(arg.keyboard, AuraDev19b6::ShutdownKeyb);
+                check(arg.logo, AuraDev19b6::ShutdownLogo);
+                check(arg.lightbar, AuraDev19b6::ShutdownBar);
+                check(arg.lid, AuraDev19b6::ShutdownBar);
+            }
+        }
+
+        if !enabled.is_empty() {
+            let data = AuraPowerDev {
+                tuf: vec![],
+                x1866: vec![],
+                x19b6: enabled,
+            };
+            dbus.proxies().led().set_leds_power(data, true)?;
+        }
+
+        if !disabled.is_empty() {
+            let data = AuraPowerDev {
+                tuf: vec![],
+                x1866: vec![],
+                x19b6: disabled,
+            };
+            dbus.proxies().led().set_leds_power(data, false)?;
+        }
+    }
+
+    Ok(())
+}
+
+fn handle_profile(
+    dbus: &RogDbusClientBlocking,
+    supported: &PlatformProfileFunctions,
+    cmd: &ProfileCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if !supported.platform_profile {
+        println!("Profiles not supported by either this kernel or by the laptop.");
+        return Err(ProfileError::NotSupported.into());
+    }
+
+    if !cmd.next && !cmd.list && cmd.profile_set.is_none() && !cmd.profile_get {
+        if !cmd.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}", ProfileCommand::usage());
+
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+        std::process::exit(1);
+    }
+
+    if cmd.next {
+        dbus.proxies().profile().next_profile()?;
+    } else if let Some(profile) = cmd.profile_set {
+        dbus.proxies().profile().set_active_profile(profile)?;
+    }
+
+    if cmd.list {
+        let res = dbus.proxies().profile().profiles()?;
+        res.iter().for_each(|p| println!("{:?}", p));
+    }
+
+    if cmd.profile_get {
+        let res = dbus.proxies().profile().active_profile()?;
+        println!("Active profile is {:?}", res);
+    }
+
+    Ok(())
+}
+
+fn handle_fan_curve(
+    dbus: &RogDbusClientBlocking,
+    supported: &PlatformProfileFunctions,
+    cmd: &FanCurveCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if !supported.fan_curves {
+        println!("Fan-curves not supported by either this kernel or by the laptop.");
+        println!("This requires kernel 5.17 or the fan curve patch listed in the readme.");
+        return Err(ProfileError::NotSupported.into());
+    }
+
+    if !cmd.get_enabled && !cmd.default && cmd.mod_profile.is_none() {
+        if !cmd.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}", FanCurveCommand::usage());
+
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+        std::process::exit(1);
+    }
+
+    if (cmd.enabled.is_some() || cmd.fan.is_some() || cmd.data.is_some())
+        && cmd.mod_profile.is_none()
+    {
+        println!("--enabled, --fan, and --data options require --mod-profile");
+        std::process::exit(666);
+    }
+
+    if cmd.get_enabled {
+        let res = dbus.proxies().profile().enabled_fan_profiles()?;
+        println!("{:?}", res);
+    }
+
+    if cmd.default {
+        dbus.proxies().profile().set_active_curve_to_defaults()?;
+    }
+
+    if let Some(profile) = cmd.mod_profile {
+        if cmd.enabled.is_none() && cmd.data.is_none() {
+            let data = dbus.proxies().profile().fan_curve_data(profile)?;
+            let data = toml::to_string(&data)?;
+            println!("\nFan curves for {:?}\n\n{}", profile, data);
+        }
+
+        if let Some(enabled) = cmd.enabled {
+            dbus.proxies()
+                .profile()
+                .set_fan_curve_enabled(profile, enabled)?;
+        }
+
+        if let Some(mut curve) = cmd.data.clone() {
+            let fan = cmd.fan.unwrap_or_default();
+            curve.set_fan(fan);
+            dbus.proxies().profile().set_fan_curve(profile, curve)?;
+        }
+    }
+
+    Ok(())
+}
+
+fn handle_bios_option(
+    dbus: &RogDbusClientBlocking,
+    supported: &RogBiosSupportedFunctions,
+    cmd: &BiosCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    {
+        if (cmd.gpu_mux_mode_set.is_none()
+            && !cmd.gpu_mux_mode_get
+            && cmd.post_sound_set.is_none()
+            && !cmd.post_sound_get
+            && cmd.panel_overdrive_set.is_none()
+            && !cmd.panel_overdrive_get)
+            || cmd.help
+        {
+            println!("Missing arg or command\n");
+
+            let usage: Vec<String> = BiosCommand::usage()
+                .lines()
+                .map(|s| s.to_string())
+                .collect();
+
+            for line in usage.iter().filter(|line| {
+                line.contains("sound") && supported.post_sound
+                    || line.contains("GPU") && supported.gpu_mux
+                    || line.contains("panel") && supported.panel_overdrive
+            }) {
+                println!("{}", line);
+            }
+        }
+
+        if let Some(opt) = cmd.post_sound_set {
+            dbus.proxies().rog_bios().set_post_boot_sound(opt)?;
+        }
+        if cmd.post_sound_get {
+            let res = dbus.proxies().rog_bios().post_boot_sound()? == 1;
+            println!("Bios POST sound on: {}", res);
+        }
+
+        if let Some(opt) = cmd.gpu_mux_mode_set {
+            println!("Rebuilding initrd to include drivers");
+            dbus.proxies()
+                .rog_bios()
+                .set_gpu_mux_mode(GpuMode::from_mux(opt))?;
+            println!("The mode change is not active until you reboot, on boot the bios will make the required change");
+        }
+        if cmd.gpu_mux_mode_get {
+            let res = dbus.proxies().rog_bios().gpu_mux_mode()?;
+            println!("Bios GPU MUX: {:?}", res);
+        }
+
+        if let Some(opt) = cmd.panel_overdrive_set {
+            dbus.proxies().rog_bios().set_panel_od(opt)?;
+        }
+        if cmd.panel_overdrive_get {
+            let res = dbus.proxies().rog_bios().panel_od()?;
+            println!("Panel overdrive on: {}", res);
+        }
+    }
+    Ok(())
+}
+
+fn check_systemd_unit_active(name: &str) -> bool {
+    if let Ok(out) = Command::new("systemctl")
+        .arg("is-active")
+        .arg(name)
+        .output()
+    {
+        let buf = String::from_utf8_lossy(&out.stdout);
+        return !buf.contains("inactive") && !buf.contains("failed");
+    }
+    false
+}
+
+fn check_systemd_unit_enabled(name: &str) -> bool {
+    if let Ok(out) = Command::new("systemctl")
+        .arg("is-enabled")
+        .arg(name)
+        .output()
+    {
+        let buf = String::from_utf8_lossy(&out.stdout);
+        return buf.contains("enabled");
+    }
+    false
+}

asusctl/src/profiles_cli.rs

@@ -0,0 +1,51 @@
+use gumdrop::Options;
+use rog_profiles::{fan_curve_set::CurveData, FanCurvePU, Profile};
+
+#[derive(Debug, Clone, Options)]
+pub struct ProfileCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(help = "toggle to next profile in list")]
+    pub next: bool,
+    #[options(help = "list available profiles")]
+    pub list: bool,
+
+    #[options(help = "get profile")]
+    pub profile_get: bool,
+    #[options(meta = "", help = "set the active profile")]
+    pub profile_set: Option<Profile>,
+}
+
+#[derive(Debug, Clone, Options)]
+pub struct FanCurveCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+
+    #[options(help = "get enabled fan profiles")]
+    pub get_enabled: bool,
+    #[options(help = "set the active profile's fan curve to default")]
+    pub default: bool,
+
+    #[options(
+        meta = "",
+        help = "profile to modify fan-curve for. Shows data if no options provided"
+    )]
+    pub mod_profile: Option<Profile>,
+    #[options(
+        meta = "",
+        help = "enable or disable <true/false> fan curve. `mod-profile` required"
+    )]
+    pub enabled: Option<bool>,
+    #[options(
+        meta = "",
+        help = "select fan <cpu/gpu> to modify. `mod-profile` required"
+    )]
+    pub fan: Option<FanCurvePU>,
+
+    #[options(
+        meta = "",
+        help = "data format = 30c:1%,49c:2%,59c:3%,69c:4%,79c:31%,89c:49%,99c:56%,109c:58%.
+                      `--mod-profile` required. If '%' is omitted the fan range is 0-255"
+    )]
+    pub data: Option<CurveData>,
+}

daemon-user/Cargo.toml

@@ -0,0 +1,32 @@
+[package]
+name = "daemon-user"
+version.workspace = true
+authors = ["Luke D Jones <luke@ljones.dev>"]
+edition = "2021"
+description = "Usermode daemon for user settings, anime, per-key lighting"
+
+[lib]
+name = "rog_user"
+path = "src/lib.rs"
+
+[[bin]]
+name = "asusd-user"
+path = "src/daemon.rs"
+
+[dependencies]
+dirs.workspace = true
+smol.workspace = true
+
+# serialisation
+serde.workspace = true
+serde_json.workspace = true
+serde_derive.workspace = true
+
+rog_anime = { path = "../rog-anime" }
+rog_aura = { path = "../rog-aura" }
+rog_dbus = { path = "../rog-dbus" }
+rog_platform = { path = "../rog-platform" }
+
+zbus.workspace = true
+zvariant.workspace = true
+zvariant_derive.workspace = true

daemon-user/README.md

@@ -0,0 +1,14 @@
+# daemon-user
+
+This crate is for the binary of `asusd-user` and its helper lib.
+
+The purpose of `asusd-user` is to run in userland and provide the user + third-party apps an interface for such things as creating AniMe sequences (and more in future, see todo list).
+
+`asusd-user` should try to be as simple as possible while allowing a decent degree of control.
+
+## TODO
+
+- [ ] CLI for basic settings/interaction
+- [ ] RGB keyboard per-key programs
+- [ ] User profiles (fan, cpu etc). These would be replacing the system-daemon profiles only when the user is active, otherwise system-daemon defaults to system settings.
+- [ ] Audio EQ visualiser - for use with anime + keyboard lighting

daemon-user/src/ctrl_anime.rs

@@ -0,0 +1,373 @@
+use rog_anime::error::AnimeError;
+use rog_anime::{ActionData, ActionLoader, AnimTime, Fade, Sequences, Vec2};
+use rog_dbus::RogDbusClientBlocking;
+use serde_derive::{Deserialize, Serialize};
+use std::time::Duration;
+use std::{
+    path::Path,
+    sync::{
+        atomic::{AtomicBool, Ordering},
+        Mutex,
+    },
+};
+use std::{sync::Arc, thread::sleep, time::Instant};
+use zbus::dbus_interface;
+use zvariant::ObjectPath;
+use zvariant_derive::Type;
+
+use crate::user_config::ConfigLoadSave;
+use crate::{error::Error, user_config::UserAnimeConfig};
+
+#[derive(Debug, Clone, Deserialize, Serialize, Type)]
+pub struct Timer {
+    type_of: TimeType,
+    /// If time type is Timer then this is milliseonds, otherwise it is animation loop count
+    count: u64,
+    /// Used only for `TimeType::Timer`, milliseonds to fade the image in for
+    fade_in: Option<u64>,
+    /// Used only for `TimeType::Timer`, milliseonds to fade the image out for
+    fade_out: Option<u64>,
+}
+
+impl From<Timer> for AnimTime {
+    fn from(time: Timer) -> Self {
+        match time.type_of {
+            TimeType::Timer => {
+                if time.fade_in.is_some() || time.fade_out.is_some() {
+                    let fade_in = time
+                        .fade_in
+                        .map_or(Duration::from_secs(0), Duration::from_millis);
+                    let fade_out = time
+                        .fade_out
+                        .map_or(Duration::from_secs(0), Duration::from_millis);
+                    let show_for = if time.count != 0 {
+                        Some(Duration::from_millis(time.count))
+                    } else {
+                        None
+                    };
+                    AnimTime::Fade(Fade::new(fade_in, show_for, fade_out))
+                } else {
+                    AnimTime::Time(Duration::from_millis(time.count))
+                }
+            }
+            TimeType::Count => AnimTime::Count(time.count as u32),
+            TimeType::Infinite => AnimTime::Infinite,
+        }
+    }
+}
+
+#[derive(Debug, Clone, Deserialize, Serialize, Type)]
+pub enum TimeType {
+    Timer,
+    Count,
+    Infinite,
+}
+
+/// The inner object exists to allow the zbus proxy to share it with a runner thread
+/// and a zbus server behind `Arc<Mutex<T>>`
+pub struct CtrlAnimeInner<'a> {
+    sequences: Sequences,
+    client: RogDbusClientBlocking<'a>,
+    do_early_return: Arc<AtomicBool>,
+}
+
+impl<'a> CtrlAnimeInner<'static> {
+    pub fn new(
+        sequences: Sequences,
+        client: RogDbusClientBlocking<'static>,
+        do_early_return: Arc<AtomicBool>,
+    ) -> Result<Self, Error> {
+        Ok(Self {
+            sequences,
+            client,
+            do_early_return,
+        })
+    }
+    /// To be called on each main loop iteration to pump out commands to the anime
+    pub fn run(&'a self) -> Result<(), Error> {
+        if self.do_early_return.load(Ordering::SeqCst) {
+            return Ok(());
+        }
+
+        for action in self.sequences.iter() {
+            match action {
+                ActionData::Animation(frames) => {
+                    rog_anime::run_animation(frames, &|output| {
+                        if self.do_early_return.load(Ordering::Acquire) {
+                            return Ok(true); // Do safe exit
+                        }
+                        self.client
+                            .proxies()
+                            .anime()
+                            .write(output)
+                            .map_err(|e| AnimeError::Dbus(format!("{}", e)))
+                            .map(|_| false)
+                    })?;
+                }
+                ActionData::Image(image) => {
+                    self.client
+                        .proxies()
+                        .anime()
+                        .write(image.as_ref().clone())
+                        .ok();
+                }
+                ActionData::Pause(duration) => {
+                    let start = Instant::now();
+                    'pause: loop {
+                        if self.do_early_return.load(Ordering::SeqCst) {
+                            return Ok(());
+                        }
+                        if Instant::now().duration_since(start) > *duration {
+                            break 'pause;
+                        }
+                        sleep(Duration::from_millis(1));
+                    }
+                }
+                ActionData::AudioEq => {}
+                ActionData::SystemInfo => {}
+                ActionData::TimeDate => {}
+                ActionData::Matrix => {}
+            }
+        }
+
+        Ok(())
+    }
+}
+
+pub struct CtrlAnime<'a> {
+    config: Arc<Mutex<UserAnimeConfig>>,
+    client: RogDbusClientBlocking<'a>,
+    inner: Arc<Mutex<CtrlAnimeInner<'a>>>,
+    /// Must be the same Atomic as in CtrlAnimeInner
+    inner_early_return: Arc<AtomicBool>,
+}
+
+impl<'a> CtrlAnime<'static> {
+    pub fn new(
+        config: Arc<Mutex<UserAnimeConfig>>,
+        inner: Arc<Mutex<CtrlAnimeInner<'static>>>,
+        client: RogDbusClientBlocking<'static>,
+        inner_early_return: Arc<AtomicBool>,
+    ) -> Result<Self, Error> {
+        Ok(CtrlAnime {
+            config,
+            client,
+            inner,
+            inner_early_return,
+        })
+    }
+
+    pub async fn add_to_server(self, server: &mut zbus::Connection) {
+        server
+            .object_server()
+            .at(
+                &ObjectPath::from_str_unchecked("/org/asuslinux/Anime"),
+                self,
+            )
+            .await
+            .map_err(|err| {
+                println!("CtrlAnime: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+// The pattern for a zbus method is:
+// - Get config lock if required
+// - Set inner_early_return to stop the inner run loop temporarily
+// - Do actions
+// - Write config if required
+// - Unset inner_early_return
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlAnime<'static> {
+    pub fn insert_asus_gif(
+        &mut self,
+        index: u32,
+        file: String,
+        time: Timer,
+        brightness: f32,
+    ) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let time: AnimTime = time.into();
+            let file = Path::new(&file);
+            let action = ActionLoader::AsusAnimation {
+                file: file.into(),
+                brightness,
+                time,
+            };
+
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json = serde_json::to_string_pretty(&*config).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    pub fn insert_image_gif(
+        &mut self,
+        index: u32,
+        file: String,
+        scale: f32,
+        angle: f32,
+        xy: (f32, f32),
+        time: Timer,
+        brightness: f32,
+    ) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let time: AnimTime = time.into();
+            let file = Path::new(&file);
+            let translation = Vec2::new(xy.0, xy.1);
+            let action = ActionLoader::ImageAnimation {
+                file: file.into(),
+                scale,
+                angle,
+                translation,
+                brightness,
+                time,
+            };
+
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    pub fn insert_image(
+        &mut self,
+        index: u32,
+        file: String,
+        scale: f32,
+        angle: f32,
+        xy: (f32, f32),
+        time: Timer,
+        brightness: f32,
+    ) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let file = Path::new(&file);
+            let time = time.into();
+            let action = ActionLoader::Image {
+                file: file.into(),
+                scale,
+                angle,
+                translation: Vec2::new(xy.0, xy.1),
+                brightness,
+                time,
+            };
+
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    pub fn insert_pause(&mut self, index: u32, millis: u64) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let action = ActionLoader::Pause(Duration::from_millis(millis));
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    pub fn remove_item(&mut self, index: u32) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller.sequences.remove_item(index as usize);
+            }
+            if (index as usize) < config.anime.len() {
+                config.anime.remove(index as usize);
+            }
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    pub fn set_state(&mut self, on: bool) -> zbus::fdo::Result<()> {
+        // Operations here need to be in specific order
+        if on {
+            self.client.proxies().anime().set_on_off(on).ok();
+            // Let the inner loop run
+            self.inner_early_return.store(false, Ordering::SeqCst);
+        } else {
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+            self.client.proxies().anime().set_on_off(on).ok();
+        }
+        Ok(())
+    }
+}

daemon-user/src/daemon.rs

@@ -0,0 +1,113 @@
+use rog_anime::usb::get_anime_type;
+use rog_aura::layouts::KeyLayout;
+use rog_dbus::RogDbusClientBlocking;
+use rog_user::{
+    ctrl_anime::{CtrlAnime, CtrlAnimeInner},
+    user_config::*,
+    DBUS_NAME,
+};
+use smol::Executor;
+use std::sync::Mutex;
+use std::{fs::OpenOptions, io::Read, path::PathBuf, sync::Arc};
+use zbus::Connection;
+
+use std::sync::atomic::AtomicBool;
+
+#[cfg(not(feature = "local_data"))]
+const DATA_DIR: &str = "/usr/share/rog-gui/";
+#[cfg(feature = "local_data")]
+const DATA_DIR: &str = env!("CARGO_MANIFEST_DIR");
+const BOARD_NAME: &str = "/sys/class/dmi/id/board_name";
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    println!("  user daemon v{}", rog_user::VERSION);
+    println!("    rog-anime v{}", rog_anime::VERSION);
+    println!("     rog-dbus v{}", rog_dbus::VERSION);
+    println!("rog-platform v{}", rog_platform::VERSION);
+
+    let (client, _) = RogDbusClientBlocking::new()?;
+    let supported = client.proxies().supported().supported_functions()?;
+
+    let mut config = UserConfig::new();
+    config.load()?;
+
+    let executor = Executor::new();
+
+    let early_return = Arc::new(AtomicBool::new(false));
+    // Set up the anime data and run loop/thread
+    if supported.anime_ctrl.0 {
+        if let Some(cfg) = config.active_anime {
+            let anime_type = get_anime_type()?;
+            let anime_config = UserAnimeConfig::load(cfg)?;
+            let anime = anime_config.create(anime_type)?;
+            let anime_config = Arc::new(Mutex::new(anime_config));
+
+            executor
+                .spawn(async move {
+                    // Create server
+                    let mut connection = Connection::session().await.unwrap();
+                    connection.request_name(DBUS_NAME).await.unwrap();
+
+                    // Inner behind mutex required for thread safety
+                    let inner = Arc::new(Mutex::new(
+                        CtrlAnimeInner::new(anime, client, early_return.clone()).unwrap(),
+                    ));
+                    // Need new client object for dbus control part
+                    let (client, _) = RogDbusClientBlocking::new().unwrap();
+                    let anime_control =
+                        CtrlAnime::new(anime_config, inner.clone(), client, early_return).unwrap();
+                    anime_control.add_to_server(&mut connection).await;
+                    loop {
+                        if let Ok(inner) = inner.clone().try_lock() {
+                            inner.run().ok();
+                        }
+                    }
+                })
+                .detach();
+        }
+    }
+
+    // if supported.keyboard_led.per_key_led_mode {
+    if let Some(cfg) = config.active_aura {
+        let mut aura_config = UserAuraConfig::load(cfg)?;
+
+        // Find and load a matching layout for laptop
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(PathBuf::from(BOARD_NAME))
+            .map_err(|e| {
+                println!("{BOARD_NAME}, {e}");
+                e
+            })?;
+        let mut board_name = String::new();
+        file.read_to_string(&mut board_name)?;
+
+        let layout = KeyLayout::find_layout(board_name.as_str(), PathBuf::from(DATA_DIR))
+            .map_err(|e| {
+                println!("{BOARD_NAME}, {e}");
+            })
+            .unwrap_or_else(|_| KeyLayout::ga401_layout());
+
+        executor
+            .spawn(async move {
+                // Create server
+                let (client, _) = RogDbusClientBlocking::new().unwrap();
+                // let connection = Connection::session().await.unwrap();
+                // connection.request_name(DBUS_NAME).await.unwrap();
+
+                loop {
+                    aura_config.aura.next_state(&layout);
+                    let packets = aura_config.aura.create_packets();
+
+                    client.proxies().led().per_key_raw(packets).unwrap();
+                    std::thread::sleep(std::time::Duration::from_millis(33));
+                }
+            })
+            .detach();
+    }
+    // }
+
+    loop {
+        smol::block_on(executor.tick());
+    }
+}

daemon-user/src/error.rs

@@ -0,0 +1,45 @@
+use std::fmt;
+
+use rog_anime::error::AnimeError;
+
+#[derive(Debug)]
+pub enum Error {
+    Io(std::io::Error),
+    ConfigLoadFail,
+    ConfigLockFail,
+    XdgVars,
+    Anime(AnimeError),
+}
+
+impl fmt::Display for Error {
+    // This trait requires `fmt` with this exact signature.
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        match self {
+            Error::Io(err) => write!(f, "Failed to open: {}", err),
+            Error::ConfigLoadFail => write!(f, "Failed to load user config"),
+            Error::ConfigLockFail => write!(f, "Failed to lock user config"),
+            Error::XdgVars => write!(f, "XDG environment vars appear unset"),
+            Error::Anime(err) => write!(f, "Anime error: {}", err),
+        }
+    }
+}
+
+impl std::error::Error for Error {}
+
+impl From<std::io::Error> for Error {
+    fn from(err: std::io::Error) -> Self {
+        Error::Io(err)
+    }
+}
+
+impl From<AnimeError> for Error {
+    fn from(err: AnimeError) -> Self {
+        Error::Anime(err)
+    }
+}
+
+impl From<Error> for zbus::fdo::Error {
+    fn from(err: Error) -> Self {
+        zbus::fdo::Error::Failed(format!("Anime zbus error: {}", err))
+    }
+}

daemon-user/src/lib.rs

@@ -0,0 +1,11 @@
+pub mod user_config;
+
+pub mod error;
+
+pub mod ctrl_anime;
+
+pub mod zbus_anime;
+
+pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
+
+pub static VERSION: &str = env!("CARGO_PKG_VERSION");

daemon-user/src/user_config.rs

@@ -0,0 +1,318 @@
+use std::{
+    fs::{create_dir, OpenOptions},
+    io::{Read, Write},
+    time::Duration,
+};
+
+use rog_anime::{ActionLoader, AnimTime, AnimeType, Fade, Sequences, Vec2};
+use rog_aura::{keys::Key, Breathe, Colour, Effect, Flicker, LedType, Speed, Static};
+use serde::de::DeserializeOwned;
+use serde_derive::{Deserialize, Serialize};
+
+use crate::error::Error;
+
+pub trait ConfigLoadSave<T: DeserializeOwned + serde::Serialize> {
+    fn name(&self) -> String;
+
+    fn default_with_name(name: String) -> T;
+
+    fn write(&self) -> Result<(), Error>
+    where
+        Self: serde::Serialize,
+    {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+        let name = self.name();
+        path.push(name + ".cfg");
+
+        let mut file = OpenOptions::new()
+            .write(true)
+            .create(true)
+            .truncate(true)
+            .open(&path)?;
+
+        let json = serde_json::to_string_pretty(&self).unwrap();
+        file.write_all(json.as_bytes())?;
+        Ok(())
+    }
+
+    fn load(name: String) -> Result<T, Error> {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+
+        path.push(name.clone() + ".cfg");
+
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&path)?;
+
+        let mut buf = String::new();
+
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                let default = Self::default_with_name(name);
+                let json = serde_json::to_string_pretty(&default).unwrap();
+                file.write_all(json.as_bytes())?;
+                return Ok(default);
+            } else if let Ok(data) = serde_json::from_str::<T>(&buf) {
+                return Ok(data);
+            }
+        }
+        Err(Error::ConfigLoadFail)
+    }
+}
+
+#[derive(Debug, Deserialize, Serialize)]
+pub struct UserAnimeConfig {
+    pub name: String,
+    pub anime: Vec<ActionLoader>,
+}
+
+impl UserAnimeConfig {
+    pub fn create(&self, anime_type: AnimeType) -> Result<Sequences, Error> {
+        let mut seq = Sequences::new(anime_type);
+
+        for (idx, action) in self.anime.iter().enumerate() {
+            seq.insert(idx, action)?;
+        }
+
+        Ok(seq)
+    }
+}
+
+impl ConfigLoadSave<UserAnimeConfig> for UserAnimeConfig {
+    fn name(&self) -> String {
+        self.name.clone()
+    }
+
+    fn default_with_name(name: String) -> Self {
+        UserAnimeConfig {
+            name,
+            ..Default::default()
+        }
+    }
+}
+
+impl Default for UserAnimeConfig {
+    fn default() -> Self {
+        Self {
+            name: "default".to_string(),
+            anime: vec![
+                ActionLoader::AsusImage {
+                    file: "/usr/share/asusd/anime/custom/diagonal-template.png".into(),
+                    brightness: 1.0,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        None,
+                        Duration::from_secs(2),
+                    )),
+                },
+                ActionLoader::AsusAnimation {
+                    file: "/usr/share/asusd/anime/asus/rog/Sunset.gif".into(),
+                    brightness: 0.5,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(6),
+                        None,
+                        Duration::from_secs(3),
+                    )),
+                },
+                ActionLoader::ImageAnimation {
+                    file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                    scale: 0.9,
+                    angle: 0.65,
+                    translation: Vec2::default(),
+                    brightness: 0.5,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        Some(Duration::from_secs(2)),
+                        Duration::from_secs(2),
+                    )),
+                },
+                ActionLoader::Image {
+                    file: "/usr/share/asusd/anime/custom/rust.png".into(),
+                    scale: 1.0,
+                    angle: 0.0,
+                    translation: Vec2::default(),
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        Some(Duration::from_secs(1)),
+                        Duration::from_secs(2),
+                    )),
+                    brightness: 0.6,
+                },
+                ActionLoader::Pause(Duration::from_secs(1)),
+                ActionLoader::ImageAnimation {
+                    file: "/usr/share/asusd/anime/custom/sonic-wait.gif".into(),
+                    scale: 0.9,
+                    angle: 0.0,
+                    translation: Vec2::new(3.0, 2.0),
+                    brightness: 0.5,
+                    time: AnimTime::Count(2),
+                },
+            ],
+        }
+    }
+}
+
+#[derive(Debug, Deserialize, Serialize)]
+pub struct UserAuraConfig {
+    pub name: String,
+    pub aura: rog_aura::Sequences,
+}
+
+impl ConfigLoadSave<UserAuraConfig> for UserAuraConfig {
+    fn name(&self) -> String {
+        self.name.clone()
+    }
+
+    fn default_with_name(name: String) -> Self {
+        UserAuraConfig {
+            name,
+            ..Default::default()
+        }
+    }
+}
+
+impl Default for UserAuraConfig {
+    fn default() -> Self {
+        let mut seq = rog_aura::Sequences::new();
+        let mut key = Effect::Breathe(Breathe::new(
+            LedType::Key(Key::W),
+            Colour(255, 0, 20),
+            Colour(20, 255, 0),
+            Speed::Low,
+        ));
+
+        seq.push(key.clone());
+        key.set_led_type(LedType::Key(Key::A));
+        seq.push(key.clone());
+        key.set_led_type(LedType::Key(Key::S));
+        seq.push(key.clone());
+        key.set_led_type(LedType::Key(Key::D));
+        seq.push(key);
+
+        let key = Effect::Breathe(Breathe::new(
+            LedType::Key(Key::F),
+            Colour(255, 0, 0),
+            Colour(255, 0, 0),
+            Speed::High,
+        ));
+        seq.push(key);
+
+        let mut key = Effect::Static(Static::new(LedType::Key(Key::RCtrl), Colour(0, 0, 255)));
+        seq.push(key.clone());
+        key.set_led_type(LedType::Key(Key::LCtrl));
+        seq.push(key.clone());
+        key.set_led_type(LedType::Key(Key::Esc));
+        seq.push(key);
+
+        let key = Effect::Flicker(Flicker::new(
+            LedType::Key(Key::N9),
+            Colour(0, 0, 255),
+            80,
+            40,
+        ));
+        seq.push(key);
+
+        Self {
+            name: "default".to_string(),
+            aura: seq,
+        }
+    }
+}
+
+#[derive(Debug, Default, Deserialize, Serialize)]
+#[serde(default)]
+pub struct UserConfig {
+    /// Name of active anime config file in the user config directory
+    pub active_anime: Option<String>,
+    /// Name of active aura config file in the user config directory
+    pub active_aura: Option<String>,
+}
+
+impl UserConfig {
+    pub fn new() -> Self {
+        Self {
+            active_anime: Some("anime-default".to_string()),
+            active_aura: Some("aura-default".to_string()),
+        }
+    }
+
+    pub fn load(&mut self) -> Result<(), Error> {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+
+        path.push("rog-user.cfg");
+
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&path)?;
+
+        let mut buf = String::new();
+
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                let json = serde_json::to_string_pretty(&self).unwrap();
+                file.write_all(json.as_bytes())?;
+            } else if let Ok(data) = serde_json::from_str::<UserConfig>(&buf) {
+                self.active_anime = data.active_anime;
+                self.active_aura = data.active_aura;
+                return Ok(());
+            }
+        }
+        Ok(())
+    }
+
+    pub fn write(&self) -> Result<(), Error> {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+
+        path.push("rog-user.cfg");
+
+        let mut file = OpenOptions::new()
+            .write(true)
+            .create(true)
+            .truncate(true)
+            .open(&path)?;
+
+        let json = serde_json::to_string_pretty(&self).unwrap();
+        file.write_all(json.as_bytes())?;
+        Ok(())
+    }
+}

daemon-user/src/zbus_anime.rs

@@ -0,0 +1,69 @@
+//! # DBus interface proxy for: `org.asuslinux.Daemon`
+//!
+//! This code was generated by `zbus-xmlgen` `1.0.0` from DBus introspection data.
+//! Source: `Interface '/org/asuslinux/Anime' from service 'org.asuslinux.Daemon' on session bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PeerProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PropertiesProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+#![allow(clippy::too_many_arguments)]
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.asuslinux.Daemon")]
+trait Daemon {
+    /// InsertAsusGif method
+    fn insert_asus_gif(
+        &self,
+        index: u32,
+        file: &str,
+        time: u32,
+        count: u32,
+        brightness: f64,
+    ) -> zbus::Result<String>;
+
+    /// InsertImage method
+    fn insert_image(
+        &self,
+        index: u32,
+        file: &str,
+        scale: f64,
+        angle: f64,
+        xy: &(f64, f64),
+        brightness: f64,
+    ) -> zbus::Result<String>;
+
+    /// InsertImageGif method
+    fn insert_image_gif(
+        &self,
+        index: u32,
+        file: &str,
+        scale: f64,
+        angle: f64,
+        xy: &(f64, f64),
+        time: u32,
+        count: u32,
+        brightness: f64,
+    ) -> zbus::Result<String>;
+
+    /// InsertPause method
+    fn insert_pause(&self, index: u32, millis: u64) -> zbus::Result<String>;
+
+    /// RemoveItem method
+    fn remove_item(&self, index: u32) -> zbus::Result<String>;
+
+    /// SetState method
+    fn set_state(&self, on: bool) -> zbus::Result<()>;
+}

daemon/Cargo.toml

@@ -0,0 +1,47 @@
+[package]
+name = "daemon"
+version.workspace = true
+license = "MPL-2.0"
+readme = "README.md"
+authors = ["Luke <luke@ljones.dev>"]
+repository = "https://gitlab.com/asus-linux/asus-nb-ctrl"
+homepage = "https://gitlab.com/asus-linux/asus-nb-ctrl"
+description = "A daemon app for ASUS GX502 and similar laptops to control missing features"
+edition = "2021"
+
+[lib]
+name = "daemon"
+path = "src/lib.rs"
+
+[[bin]]
+name = "asusd"
+path = "src/daemon.rs"
+
+[dependencies]
+rog_anime = { path = "../rog-anime", features = ["dbus"] }
+rog_aura = { path = "../rog-aura", features = ["dbus"] }
+rog_platform = { path = "../rog-platform" }
+rog_profiles = { path = "../rog-profiles" }
+rog_dbus = { path = "../rog-dbus" }
+
+async-trait.workspace = true
+tokio.workspace = true
+
+# cli and logging
+log.workspace = true
+env_logger.workspace = true
+
+zbus.workspace = true
+zvariant.workspace = true
+logind-zbus.workspace = true
+
+# serialisation
+serde.workspace = true
+serde_derive.workspace = true
+serde_json.workspace = true
+toml.workspace = true
+
+# Device control
+sysfs-class.workspace = true # used for backlight control and baord ID
+
+concat-idents.workspace = true

daemon/src/config.rs

@@ -0,0 +1,83 @@
+use log::{error, warn};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+use std::path::PathBuf;
+
+pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
+
+#[derive(Deserialize, Serialize, Default)]
+#[serde(default)]
+pub struct Config {
+    /// Save charge limit for restoring on boot
+    pub bat_charge_limit: u8,
+    pub panel_od: bool,
+}
+
+impl Config {
+    fn new() -> Self {
+        Config {
+            bat_charge_limit: 100,
+            panel_od: false,
+        }
+    }
+
+    /// `load` will attempt to read the config, and panic if the dir is missing
+    pub fn load() -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&PathBuf::from(CONFIG_PATH))
+            .unwrap_or_else(|e| panic!("Error opening {}, {}", CONFIG_PATH, e)); // okay to cause panic here
+        let mut buf = String::new();
+        let config;
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                config = Self::new();
+            } else if let Ok(data) = serde_json::from_str(&buf) {
+                config = data;
+            } else {
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    CONFIG_PATH, CONFIG_PATH
+                );
+                let cfg_old = CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        CONFIG_PATH, err
+                    )
+                });
+                config = Self::new();
+            }
+        } else {
+            config = Self::new()
+        }
+        config.write();
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", CONFIG_PATH);
+            } else {
+                *self = serde_json::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", CONFIG_PATH));
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(CONFIG_PATH).expect("Couldn't overwrite config");
+        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+}

daemon/src/ctrl_anime/config.rs

@@ -0,0 +1,272 @@
+use crate::VERSION;
+use log::{error, info, warn};
+use rog_anime::{error::AnimeError, ActionData, ActionLoader, AnimTime, Vec2};
+use rog_anime::{AnimeType, Fade};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+use std::time::Duration;
+
+pub static ANIME_CONFIG_PATH: &str = "/etc/asusd/anime.conf";
+pub static ANIME_CACHE_PATH: &str = "/etc/asusd/anime-cache.conf";
+
+#[derive(Deserialize, Serialize)]
+pub struct AnimeConfigV341 {
+    pub system: Option<ActionLoader>,
+    pub boot: Option<ActionLoader>,
+    pub suspend: Option<ActionLoader>,
+    pub shutdown: Option<ActionLoader>,
+}
+
+impl AnimeConfigV341 {
+    pub(crate) fn into_current(self) -> AnimeConfig {
+        AnimeConfig {
+            system: if let Some(ani) = self.system {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            boot: if let Some(ani) = self.boot {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            wake: if let Some(ani) = self.suspend {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            shutdown: if let Some(ani) = self.shutdown {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        }
+    }
+}
+
+#[derive(Deserialize, Serialize)]
+pub struct AnimeConfigV352 {
+    pub system: Vec<ActionLoader>,
+    pub boot: Vec<ActionLoader>,
+    pub wake: Vec<ActionLoader>,
+    pub shutdown: Vec<ActionLoader>,
+    pub brightness: f32,
+}
+
+impl AnimeConfigV352 {
+    pub(crate) fn into_current(self) -> AnimeConfig {
+        AnimeConfig {
+            system: self.system,
+            boot: self.boot,
+            wake: self.wake,
+            shutdown: self.shutdown,
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        }
+    }
+}
+
+#[derive(Deserialize, Serialize, Default)]
+pub struct AnimeConfigCached {
+    pub system: Vec<ActionData>,
+    pub boot: Vec<ActionData>,
+    pub wake: Vec<ActionData>,
+    pub shutdown: Vec<ActionData>,
+}
+
+impl AnimeConfigCached {
+    pub fn init_from_config(
+        &mut self,
+        config: &AnimeConfig,
+        anime_type: AnimeType,
+    ) -> Result<(), AnimeError> {
+        let mut sys = Vec::with_capacity(config.system.len());
+        for ani in config.system.iter() {
+            sys.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.system = sys;
+
+        let mut boot = Vec::with_capacity(config.boot.len());
+        for ani in config.boot.iter() {
+            boot.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.boot = boot;
+
+        let mut wake = Vec::with_capacity(config.wake.len());
+        for ani in config.wake.iter() {
+            wake.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.wake = wake;
+
+        let mut shutdown = Vec::with_capacity(config.shutdown.len());
+        for ani in config.shutdown.iter() {
+            shutdown.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.shutdown = shutdown;
+        Ok(())
+    }
+}
+
+/// Config for base system actions for the anime display
+#[derive(Deserialize, Serialize)]
+pub struct AnimeConfig {
+    pub system: Vec<ActionLoader>,
+    pub boot: Vec<ActionLoader>,
+    pub wake: Vec<ActionLoader>,
+    pub shutdown: Vec<ActionLoader>,
+    pub brightness: f32,
+    pub awake_enabled: bool,
+    pub boot_anim_enabled: bool,
+}
+
+impl Default for AnimeConfig {
+    fn default() -> Self {
+        AnimeConfig {
+            system: Vec::new(),
+            boot: Vec::new(),
+            wake: Vec::new(),
+            shutdown: Vec::new(),
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        }
+    }
+}
+
+impl AnimeConfig {
+    /// `load` will attempt to read the config, and panic if the dir is missing
+    pub fn load() -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&ANIME_CONFIG_PATH)
+            .unwrap_or_else(|_| {
+                panic!(
+                    "The file {} or directory /etc/asusd/ is missing",
+                    ANIME_CONFIG_PATH
+                )
+            }); // okay to cause panic here
+        let mut buf = String::new();
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                return AnimeConfig::create_default(&mut file);
+            } else {
+                if let Ok(mut data) = serde_json::from_str(&buf) {
+                    Self::clamp_config_brightness(&mut data);
+                    return data;
+                } else if let Ok(data) = serde_json::from_str::<AnimeConfigV341>(&buf) {
+                    let mut config = data.into_current();
+                    config.write();
+                    info!("Updated config version to: {}", VERSION);
+                    Self::clamp_config_brightness(&mut config);
+                    return config;
+                } else if let Ok(data) = serde_json::from_str::<AnimeConfigV352>(&buf) {
+                    let mut config = data.into_current();
+                    config.write();
+                    info!("Updated config version to: {}", VERSION);
+                    Self::clamp_config_brightness(&mut config);
+                    return config;
+                }
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    ANIME_CONFIG_PATH, ANIME_CONFIG_PATH
+                );
+                let cfg_old = ANIME_CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(ANIME_CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        ANIME_CONFIG_PATH, err
+                    )
+                });
+            }
+        }
+        AnimeConfig::create_default(&mut file)
+    }
+
+    fn clamp_config_brightness(mut config: &mut AnimeConfig) {
+        if config.brightness < 0.0 || config.brightness > 1.0 {
+            warn!(
+                "Clamped brightness to [0.0 ; 1.0], was {}",
+                config.brightness
+            );
+            config.brightness = f32::max(0.0, f32::min(1.0, config.brightness));
+        }
+    }
+
+    fn create_default(file: &mut File) -> Self {
+        // create a default config here
+        let config = AnimeConfig {
+            system: vec![],
+            boot: vec![ActionLoader::ImageAnimation {
+                file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                scale: 0.9,
+                angle: 0.65,
+                translation: Vec2::default(),
+                brightness: 1.0,
+                time: AnimTime::Fade(Fade::new(
+                    Duration::from_secs(2),
+                    Some(Duration::from_secs(2)),
+                    Duration::from_secs(2),
+                )),
+            }],
+            wake: vec![ActionLoader::ImageAnimation {
+                file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                scale: 0.9,
+                angle: 0.65,
+                translation: Vec2::default(),
+                brightness: 1.0,
+                time: AnimTime::Fade(Fade::new(
+                    Duration::from_secs(2),
+                    Some(Duration::from_secs(2)),
+                    Duration::from_secs(2),
+                )),
+            }],
+            shutdown: vec![ActionLoader::ImageAnimation {
+                file: "/usr/share/asusd/anime/custom/sonic-wait.gif".into(),
+                scale: 0.9,
+                angle: 0.0,
+                translation: Vec2::new(3.0, 2.0),
+                brightness: 1.0,
+                time: AnimTime::Infinite,
+            }],
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        };
+        // Should be okay to unwrap this as is since it is a Default
+        let json = serde_json::to_string_pretty(&config).unwrap();
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|_| panic!("Could not write {}", ANIME_CONFIG_PATH));
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&ANIME_CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", ANIME_CONFIG_PATH, err));
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", ANIME_CONFIG_PATH);
+            } else {
+                let x: AnimeConfig = serde_json::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", ANIME_CONFIG_PATH));
+                *self = x;
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(ANIME_CONFIG_PATH).expect("Couldn't overwrite config");
+        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+}

daemon/src/ctrl_anime/mod.rs

@@ -0,0 +1,210 @@
+pub mod config;
+/// Implements CtrlTask, Reloadable, ZbusRun
+pub mod trait_impls;
+
+use self::config::{AnimeConfig, AnimeConfigCached};
+use crate::{error::RogError, GetSupported};
+use ::zbus::export::futures_util::lock::Mutex;
+use log::{error, info, warn};
+use rog_anime::{
+    error::AnimeError,
+    usb::{get_anime_type, pkt_for_flush, pkts_for_init},
+    ActionData, AnimeDataBuffer, AnimePacketType, AnimeType,
+};
+use rog_platform::{hid_raw::HidRaw, supported::AnimeSupportedFunctions, usb_raw::USBRaw};
+use std::sync::atomic::{AtomicBool, Ordering};
+use std::{convert::TryFrom, error::Error, sync::Arc, thread::sleep};
+
+impl GetSupported for CtrlAnime {
+    type A = AnimeSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        AnimeSupportedFunctions(HidRaw::new("193b").is_ok())
+    }
+}
+
+pub struct CtrlAnime {
+    node: USBRaw,
+    anime_type: AnimeType,
+    cache: AnimeConfigCached,
+    config: AnimeConfig,
+    // set to force thread to exit
+    thread_exit: Arc<AtomicBool>,
+    // Set to false when the thread exits
+    thread_running: Arc<AtomicBool>,
+}
+
+impl CtrlAnime {
+    #[inline]
+    pub fn new(config: AnimeConfig) -> Result<CtrlAnime, Box<dyn Error>> {
+        let node = USBRaw::new(0x193b)?;
+        let anime_type = get_anime_type()?;
+
+        info!("Device has an AniMe Matrix display");
+        let mut cache = AnimeConfigCached::default();
+        cache.init_from_config(&config, anime_type)?;
+
+        let ctrl = CtrlAnime {
+            node,
+            anime_type,
+            cache,
+            config,
+            thread_exit: Arc::new(AtomicBool::new(false)),
+            thread_running: Arc::new(AtomicBool::new(false)),
+        };
+        ctrl.do_initialization()?;
+
+        Ok(ctrl)
+    }
+    // let device = CtrlAnime::get_device(0x0b05, 0x193b)?;
+
+    /// Start an action thread. This is classed as a singleton and there should be only
+    /// one running - so the thread uses atomics to signal run/exit.
+    ///
+    /// Because this also writes to the usb device, other write tries (display only) *must*
+    /// get the mutex lock and set the thread_exit atomic.
+    fn run_thread(inner: Arc<Mutex<CtrlAnime>>, actions: Vec<ActionData>, mut once: bool) {
+        if actions.is_empty() {
+            warn!("AniMe system actions was empty");
+            return;
+        }
+
+        // Loop rules:
+        // - Lock the mutex **only when required**. That is, the lock must be held for the shortest duration possible.
+        // - An AtomicBool used for thread exit should be checked in every loop, including nested
+
+        // The only reason for this outer thread is to prevent blocking while waiting for the
+        // next spawned thread to exit
+        // TODO: turn this in to async task (maybe? COuld still risk blocking main thread)
+        std::thread::Builder::new()
+            .name("AniMe system thread start".into())
+            .spawn(move || {
+                info!("AniMe new system thread started");
+                // Getting copies of these Atomics is done *in* the thread to ensure
+                // we don't block other threads/main
+                let thread_exit;
+                let thread_running;
+                let anime_type;
+                loop {
+                    if let Some(lock) = inner.try_lock() {
+                        thread_exit = lock.thread_exit.clone();
+                        thread_running = lock.thread_running.clone();
+                        anime_type = lock.anime_type;
+                        break;
+                    }
+                }
+                // First two loops are to ensure we *do* aquire a lock on the mutex
+                // The reason the loop is required is because the USB writes can block
+                // for up to 10ms. We can't fail to get the atomics.
+                while thread_running.load(Ordering::SeqCst) {
+                    // Make any running loop exit first
+                    thread_exit.store(true, Ordering::SeqCst);
+                }
+
+                info!("AniMe no previous system thread running (now)");
+                thread_exit.store(false, Ordering::SeqCst);
+
+                'main: loop {
+                    thread_running.store(true, Ordering::SeqCst);
+                    for action in actions.iter() {
+                        if thread_exit.load(Ordering::SeqCst) {
+                            break 'main;
+                        }
+                        match action {
+                            ActionData::Animation(frames) => {
+                                if let Err(err) = rog_anime::run_animation(frames, &|frame| {
+                                    if thread_exit.load(Ordering::Acquire) {
+                                        info!("rog-anime: frame-loop was asked to exit");
+                                        return Ok(true); // Do safe exit
+                                    }
+                                    inner
+                                        .try_lock()
+                                        .map(|lock| {
+                                            lock.write_data_buffer(frame)
+                                                .map_err(|err| {
+                                                    warn!(
+                                                        "rog_anime::run_animation:callback {}",
+                                                        err
+                                                    );
+                                                })
+                                                .ok();
+                                            false // Don't exit yet
+                                        })
+                                        .map(Ok)
+                                        .unwrap_or_else(|| {
+                                            warn!("rog_anime::run_animation:callback failed");
+                                            Err(AnimeError::NoFrames)
+                                        })
+                                }) {
+                                    warn!("rog_anime::run_animation:Animation {}", err);
+                                    break 'main;
+                                };
+                            }
+                            ActionData::Image(image) => {
+                                once = false;
+                                if let Some(lock) = inner.try_lock() {
+                                    lock.write_data_buffer(image.as_ref().clone())
+                                        .map_err(|e| error!("{}", e))
+                                        .ok();
+                                }
+                            }
+                            ActionData::Pause(duration) => sleep(*duration),
+                            ActionData::AudioEq => {}
+                            ActionData::SystemInfo => {}
+                            ActionData::TimeDate => {}
+                            ActionData::Matrix => {}
+                        }
+                    }
+                    if thread_exit.load(Ordering::SeqCst) {
+                        break 'main;
+                    }
+                    if once || actions.is_empty() {
+                        break 'main;
+                    }
+                }
+                // Clear the display on exit
+                if let Some(lock) = inner.try_lock() {
+                    if let Ok(data) =
+                        AnimeDataBuffer::from_vec(anime_type, vec![0u8; anime_type.data_length()])
+                            .map_err(|e| error!("{}", e))
+                    {
+                        lock.write_data_buffer(data)
+                            .map_err(|err| {
+                                warn!("rog_anime::run_animation:callback {}", err);
+                            })
+                            .ok();
+                    }
+                }
+                // Loop ended, set the atmonics
+                thread_running.store(false, Ordering::SeqCst);
+                info!("AniMe system thread exited");
+            })
+            .map(|err| info!("AniMe system thread: {:?}", err))
+            .ok();
+    }
+
+    /// Write only a data packet. This will modify the leds brightness using the
+    /// global brightness set in config.
+    fn write_data_buffer(&self, mut buffer: AnimeDataBuffer) -> Result<(), RogError> {
+        for led in buffer.data_mut().iter_mut() {
+            let mut bright = *led as f32 * self.config.brightness;
+            if bright > 254.0 {
+                bright = 254.0;
+            }
+            *led = bright as u8;
+        }
+        let data = AnimePacketType::try_from(buffer)?;
+        for row in data.iter() {
+            self.node.write_bytes(row)?;
+        }
+        self.node.write_bytes(&pkt_for_flush())?;
+        Ok(())
+    }
+
+    fn do_initialization(&self) -> Result<(), RogError> {
+        let pkts = pkts_for_init();
+        self.node.write_bytes(&pkts[0])?;
+        self.node.write_bytes(&pkts[1])?;
+        Ok(())
+    }
+}

daemon/src/ctrl_anime/trait_impls.rs

@@ -0,0 +1,216 @@
+use super::CtrlAnime;
+use crate::error::RogError;
+use async_trait::async_trait;
+use log::{info, warn};
+use rog_anime::{
+    usb::{pkt_for_apply, pkt_for_set_boot, pkt_for_set_on},
+    AnimeDataBuffer, AnimePowerStates,
+};
+use std::sync::{atomic::Ordering, Arc};
+use zbus::{
+    dbus_interface,
+    export::futures_util::lock::{Mutex, MutexGuard},
+    Connection, SignalContext,
+};
+
+pub(super) const ZBUS_PATH: &str = "/org/asuslinux/Anime";
+
+#[derive(Clone)]
+pub struct CtrlAnimeZbus(pub Arc<Mutex<CtrlAnime>>);
+
+/// The struct with the main dbus methods requires this trait
+#[async_trait]
+impl crate::ZbusRun for CtrlAnimeZbus {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, ZBUS_PATH, server).await;
+    }
+}
+
+// None of these calls can be guarnateed to succeed unless we loop until okay
+// If the try_lock *does* succeed then any other thread trying to lock will not grab it
+// until we finish.
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlAnimeZbus {
+    /// Writes a data stream of length. Will force system thread to exit until it is restarted
+    async fn write(&self, input: AnimeDataBuffer) -> zbus::fdo::Result<()> {
+        let lock = self.0.lock().await;
+        lock.thread_exit.store(true, Ordering::SeqCst);
+        lock.write_data_buffer(input).map_err(|err| {
+            warn!("rog_anime::run_animation:callback {}", err);
+            err
+        })?;
+        Ok(())
+    }
+
+    /// Set the global AniMe brightness
+    async fn set_brightness(&self, bright: f32) {
+        let mut lock = self.0.lock().await;
+        let mut bright = bright;
+        if bright < 0.0 {
+            bright = 0.0
+        } else if bright > 1.0 {
+            bright = 1.0;
+        }
+        lock.config.brightness = bright;
+        lock.config.write();
+    }
+
+    /// Set whether the AniMe is displaying images/data
+    async fn set_on_off(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>, status: bool) {
+        let mut lock = self.0.lock().await;
+        lock.node
+            .write_bytes(&pkt_for_set_on(status))
+            .map_err(|err| {
+                warn!("rog_anime::run_animation:callback {}", err);
+            })
+            .ok();
+        lock.config.awake_enabled = status;
+        lock.config.write();
+
+        Self::notify_power_states(
+            &ctxt,
+            AnimePowerStates {
+                brightness: lock.config.brightness.floor() as u8,
+                enabled: lock.config.awake_enabled,
+                boot_anim_enabled: lock.config.boot_anim_enabled,
+            },
+        )
+        .await
+        .ok();
+    }
+
+    /// Set whether the AniMe will show boot, suspend, or off animations
+    async fn set_boot_on_off(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>, on: bool) {
+        let mut lock = self.0.lock().await;
+        lock.node
+            .write_bytes(&pkt_for_set_boot(on))
+            .map_err(|err| {
+                warn!("rog_anime::run_animation:callback {}", err);
+            })
+            .ok();
+        lock.node
+            .write_bytes(&pkt_for_apply())
+            .map_err(|err| {
+                warn!("rog_anime::run_animation:callback {}", err);
+            })
+            .ok();
+        lock.config.boot_anim_enabled = on;
+        lock.config.write();
+
+        Self::notify_power_states(
+            &ctxt,
+            AnimePowerStates {
+                brightness: lock.config.brightness.floor() as u8,
+                enabled: lock.config.awake_enabled,
+                boot_anim_enabled: lock.config.boot_anim_enabled,
+            },
+        )
+        .await
+        .ok();
+    }
+
+    /// The main loop is the base system set action if the user isn't running
+    /// the user daemon
+    async fn run_main_loop(&self, start: bool) {
+        if start {
+            let lock = self.0.lock().await;
+            lock.thread_exit.store(true, Ordering::SeqCst);
+            CtrlAnime::run_thread(self.0.clone(), lock.cache.system.clone(), false);
+        }
+    }
+
+    /// Get status of if the AniMe LEDs are on/displaying while system is awake
+    #[dbus_interface(property)]
+    async fn awake_enabled(&self) -> bool {
+        let lock = self.0.lock().await;
+        lock.config.awake_enabled
+    }
+
+    /// Get the status of if factory system-status animations are enabled
+    #[dbus_interface(property)]
+    async fn boot_enabled(&self) -> bool {
+        let lock = self.0.lock().await;
+        lock.config.boot_anim_enabled
+    }
+
+    /// Notify listeners of the status of AniMe LED power and factory system-status animations
+    #[dbus_interface(signal)]
+    async fn notify_power_states(
+        ctxt: &SignalContext<'_>,
+        data: AnimePowerStates,
+    ) -> zbus::Result<()>;
+}
+
+#[async_trait]
+impl crate::CtrlTask for CtrlAnimeZbus {
+    fn zbus_path() -> &'static str {
+        ZBUS_PATH
+    }
+
+    async fn create_tasks(&self, _: SignalContext<'static>) -> Result<(), RogError> {
+        let run_action =
+            |start: bool, lock: MutexGuard<CtrlAnime>, inner: Arc<Mutex<CtrlAnime>>| {
+                if start {
+                    info!("CtrlAnimeTask running sleep animation");
+                    CtrlAnime::run_thread(inner, lock.cache.shutdown.clone(), true);
+                } else {
+                    info!("CtrlAnimeTask running wake animation");
+                    CtrlAnime::run_thread(inner, lock.cache.wake.clone(), true);
+                }
+            };
+
+        let inner1 = self.0.clone();
+        let inner2 = self.0.clone();
+        let inner3 = self.0.clone();
+        let inner4 = self.0.clone();
+        self.create_sys_event_tasks(
+            // Loop is required to try an attempt to get the mutex *without* blocking
+            // other threads - it is possible to end up with deadlocks otherwise.
+            move || loop {
+                if let Some(lock) = inner1.try_lock() {
+                    run_action(true, lock, inner1.clone());
+                    break;
+                }
+            },
+            move || loop {
+                if let Some(lock) = inner2.try_lock() {
+                    run_action(false, lock, inner2.clone());
+                    break;
+                }
+            },
+            move || loop {
+                if let Some(lock) = inner3.try_lock() {
+                    run_action(true, lock, inner3.clone());
+                    break;
+                }
+            },
+            move || loop {
+                if let Some(lock) = inner4.try_lock() {
+                    run_action(false, lock, inner4.clone());
+                    break;
+                }
+            },
+        )
+        .await;
+
+        Ok(())
+    }
+}
+
+#[async_trait]
+impl crate::Reloadable for CtrlAnimeZbus {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        if let Some(lock) = self.0.try_lock() {
+            lock.node
+                .write_bytes(&pkt_for_set_on(lock.config.awake_enabled))?;
+            lock.node.write_bytes(&pkt_for_apply())?;
+            lock.node
+                .write_bytes(&pkt_for_set_boot(lock.config.boot_anim_enabled))?;
+            lock.node.write_bytes(&pkt_for_apply())?;
+
+            let action = lock.cache.boot.clone();
+            CtrlAnime::run_thread(self.0.clone(), action, true);
+        }
+        Ok(())
+    }
+}

daemon/src/ctrl_aura/config.rs

@@ -0,0 +1,426 @@
+use crate::laptops::{LaptopLedData, ASUS_KEYBOARD_DEVICES};
+use log::{error, warn};
+use rog_aura::usb::{AuraDev1866, AuraDev19b6, AuraDevTuf, AuraDevice, AuraPowerDev};
+use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Direction, LedBrightness, Speed, GRADIENT};
+use rog_platform::hid_raw::HidRaw;
+use rog_platform::keyboard_led::KeyboardLed;
+use serde_derive::{Deserialize, Serialize};
+use std::collections::{BTreeMap, HashSet};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+
+pub static AURA_CONFIG_PATH: &str = "/etc/asusd/aura.conf";
+
+/// Enable/disable LED control in various states such as
+/// when the device is awake, suspended, shutting down or
+/// booting.
+#[derive(Clone, Debug, PartialEq, Eq, Serialize, Deserialize)]
+pub enum AuraPowerConfig {
+    AuraDevTuf(HashSet<AuraDevTuf>),
+    AuraDev1866(HashSet<AuraDev1866>),
+    AuraDev19b6(HashSet<AuraDev19b6>),
+}
+
+impl AuraPowerConfig {
+    /// Invalid for TUF laptops
+    pub fn to_bytes(control: &Self) -> [u8; 3] {
+        match control {
+            AuraPowerConfig::AuraDevTuf(_) => [0, 0, 0],
+            AuraPowerConfig::AuraDev1866(c) => {
+                let c: Vec<AuraDev1866> = c.iter().copied().collect();
+                AuraDev1866::to_bytes(&c)
+            }
+            AuraPowerConfig::AuraDev19b6(c) => {
+                let c: Vec<AuraDev19b6> = c.iter().copied().collect();
+                AuraDev19b6::to_bytes(&c)
+            }
+        }
+    }
+
+    pub fn to_tuf_bool_array(control: &Self) -> Option<[bool; 5]> {
+        if let Self::AuraDevTuf(c) = control {
+            return Some([
+                true,
+                c.contains(&AuraDevTuf::Boot),
+                c.contains(&AuraDevTuf::Awake),
+                c.contains(&AuraDevTuf::Sleep),
+                c.contains(&AuraDevTuf::Keyboard),
+            ]);
+        }
+
+        if let Self::AuraDev1866(c) = control {
+            return Some([
+                true,
+                c.contains(&AuraDev1866::Boot),
+                c.contains(&AuraDev1866::Awake),
+                c.contains(&AuraDev1866::Sleep),
+                c.contains(&AuraDev1866::Keyboard),
+            ]);
+        }
+
+        None
+    }
+
+    pub fn set_tuf(&mut self, power: AuraDevTuf, on: bool) {
+        if let Self::AuraDevTuf(p) = self {
+            if on {
+                p.insert(power);
+            } else {
+                p.remove(&power);
+            }
+        }
+    }
+    pub fn set_0x1866(&mut self, power: AuraDev1866, on: bool) {
+        if let Self::AuraDev1866(p) = self {
+            if on {
+                p.insert(power);
+            } else {
+                p.remove(&power);
+            }
+        }
+    }
+
+    pub fn set_0x19b6(&mut self, power: AuraDev19b6, on: bool) {
+        if let Self::AuraDev19b6(p) = self {
+            if on {
+                p.insert(power);
+            } else {
+                p.remove(&power);
+            }
+        }
+    }
+}
+
+impl From<&AuraPowerConfig> for AuraPowerDev {
+    fn from(config: &AuraPowerConfig) -> Self {
+        match config {
+            AuraPowerConfig::AuraDevTuf(d) => AuraPowerDev {
+                tuf: d.iter().copied().collect(),
+                x1866: vec![],
+                x19b6: vec![],
+            },
+            AuraPowerConfig::AuraDev1866(d) => AuraPowerDev {
+                tuf: vec![],
+                x1866: d.iter().copied().collect(),
+                x19b6: vec![],
+            },
+            AuraPowerConfig::AuraDev19b6(d) => AuraPowerDev {
+                tuf: vec![],
+                x1866: vec![],
+                x19b6: d.iter().copied().collect(),
+            },
+        }
+    }
+}
+
+#[derive(Deserialize, Serialize)]
+// #[serde(default)]
+pub struct AuraConfig {
+    pub brightness: LedBrightness,
+    pub current_mode: AuraModeNum,
+    pub builtins: BTreeMap<AuraModeNum, AuraEffect>,
+    pub multizone: Option<BTreeMap<AuraModeNum, Vec<AuraEffect>>>,
+    pub multizone_on: bool,
+    pub enabled: AuraPowerConfig,
+}
+
+impl Default for AuraConfig {
+    fn default() -> Self {
+        let mut prod_id = AuraDevice::Unknown;
+        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+            if HidRaw::new(prod).is_ok() {
+                prod_id = AuraDevice::from(*prod);
+                break;
+            }
+        }
+
+        if prod_id == AuraDevice::Unknown {
+            if let Ok(p) = KeyboardLed::new() {
+                if p.has_kbd_rgb_mode() {
+                    prod_id = AuraDevice::Tuf;
+                }
+            }
+        }
+
+        let enabled = if prod_id == AuraDevice::X19B6 {
+            AuraPowerConfig::AuraDev19b6(HashSet::from([
+                AuraDev19b6::BootLogo,
+                AuraDev19b6::BootKeyb,
+                AuraDev19b6::SleepLogo,
+                AuraDev19b6::SleepKeyb,
+                AuraDev19b6::AwakeLogo,
+                AuraDev19b6::AwakeKeyb,
+                AuraDev19b6::ShutdownLogo,
+                AuraDev19b6::ShutdownKeyb,
+                AuraDev19b6::BootBar,
+                AuraDev19b6::AwakeBar,
+                AuraDev19b6::SleepBar,
+                AuraDev19b6::ShutdownBar,
+            ]))
+        } else if prod_id == AuraDevice::Tuf {
+            AuraPowerConfig::AuraDevTuf(HashSet::from([
+                AuraDevTuf::Awake,
+                AuraDevTuf::Boot,
+                AuraDevTuf::Sleep,
+                AuraDevTuf::Keyboard,
+            ]))
+        } else {
+            AuraPowerConfig::AuraDev1866(HashSet::from([
+                AuraDev1866::Awake,
+                AuraDev1866::Boot,
+                AuraDev1866::Sleep,
+                AuraDev1866::Keyboard,
+                AuraDev1866::Lightbar,
+            ]))
+        };
+
+        AuraConfig {
+            brightness: LedBrightness::Med,
+            current_mode: AuraModeNum::Static,
+            builtins: BTreeMap::new(),
+            multizone: None,
+            multizone_on: false,
+            enabled,
+        }
+    }
+}
+
+impl AuraConfig {
+    /// `load` will attempt to read the config, and panic if the dir is missing
+    pub fn load(supported_led_modes: &LaptopLedData) -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&AURA_CONFIG_PATH)
+            .unwrap_or_else(|_| {
+                panic!(
+                    "The file {} or directory /etc/asusd/ is missing",
+                    AURA_CONFIG_PATH
+                )
+            }); // okay to cause panic here
+        let mut buf = String::new();
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                return AuraConfig::create_default(&mut file, supported_led_modes);
+            } else {
+                if let Ok(data) = serde_json::from_str(&buf) {
+                    return data;
+                }
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    AURA_CONFIG_PATH, AURA_CONFIG_PATH
+                );
+                let cfg_old = AURA_CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(AURA_CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        AURA_CONFIG_PATH, err
+                    )
+                });
+            }
+        }
+        AuraConfig::create_default(&mut file, supported_led_modes)
+    }
+
+    fn create_default(file: &mut File, support_data: &LaptopLedData) -> Self {
+        // create a default config here
+        let mut config = AuraConfig::default();
+
+        for n in &support_data.standard {
+            config
+                .builtins
+                .insert(*n, AuraEffect::default_with_mode(*n));
+
+            if !support_data.multizone.is_empty() {
+                let mut default = vec![];
+                for (i, tmp) in support_data.multizone.iter().enumerate() {
+                    default.push(AuraEffect {
+                        mode: *n,
+                        zone: *tmp,
+                        colour1: *GRADIENT.get(i).unwrap_or(&GRADIENT[0]),
+                        colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
+                        speed: Speed::Med,
+                        direction: Direction::Left,
+                    })
+                }
+                if let Some(m) = config.multizone.as_mut() {
+                    m.insert(*n, default);
+                } else {
+                    let mut tmp = BTreeMap::new();
+                    tmp.insert(*n, default);
+                    config.multizone = Some(tmp);
+                }
+            }
+        }
+
+        // Should be okay to unwrap this as is since it is a Default
+        let json = serde_json::to_string(&config).unwrap();
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|_| panic!("Could not write {}", AURA_CONFIG_PATH));
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&AURA_CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", AURA_CONFIG_PATH, err));
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", AURA_CONFIG_PATH);
+            } else {
+                let x = serde_json::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", AURA_CONFIG_PATH));
+                *self = x;
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(AURA_CONFIG_PATH).expect("Couldn't overwrite config");
+        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+
+    /// Set the mode data, current mode, and if multizone enabled.
+    ///
+    /// Multipurpose, will accept AuraEffect with zones and put in the correct store.
+    pub fn set_builtin(&mut self, effect: AuraEffect) {
+        self.current_mode = effect.mode;
+        match effect.zone() {
+            AuraZone::None => {
+                self.builtins.insert(*effect.mode(), effect);
+                self.multizone_on = false;
+            }
+            _ => {
+                if let Some(multi) = self.multizone.as_mut() {
+                    if let Some(fx) = multi.get_mut(effect.mode()) {
+                        for fx in fx.iter_mut() {
+                            if fx.zone == effect.zone {
+                                *fx = effect;
+                                return;
+                            }
+                        }
+                        fx.push(effect);
+                    } else {
+                        multi.insert(*effect.mode(), vec![effect]);
+                    }
+                } else {
+                    let mut tmp = BTreeMap::new();
+                    tmp.insert(*effect.mode(), vec![effect]);
+                    self.multizone = Some(tmp);
+                }
+                self.multizone_on = true;
+            }
+        }
+    }
+
+    pub fn get_multizone(&self, aura_type: AuraModeNum) -> Option<&[AuraEffect]> {
+        if let Some(multi) = &self.multizone {
+            return multi.get(&aura_type).map(|v| v.as_slice());
+        }
+        None
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::AuraConfig;
+    use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Colour};
+
+    #[test]
+    fn set_multizone_4key_config() {
+        let mut config = AuraConfig::default();
+
+        let effect = AuraEffect {
+            colour1: Colour(0xff, 0x00, 0xff),
+            zone: AuraZone::Key1,
+            ..Default::default()
+        };
+        config.set_builtin(effect);
+
+        assert!(config.multizone.is_some());
+
+        let effect = AuraEffect {
+            colour1: Colour(0x00, 0xff, 0xff),
+            zone: AuraZone::Key2,
+            ..Default::default()
+        };
+        config.set_builtin(effect);
+
+        let effect = AuraEffect {
+            colour1: Colour(0xff, 0xff, 0x00),
+            zone: AuraZone::Key3,
+            ..Default::default()
+        };
+        config.set_builtin(effect);
+
+        let effect = AuraEffect {
+            colour1: Colour(0x00, 0xff, 0x00),
+            zone: AuraZone::Key4,
+            ..Default::default()
+        };
+        let effect_clone = effect.clone();
+        config.set_builtin(effect);
+        // This should replace existing
+        config.set_builtin(effect_clone);
+
+        let res = config.multizone.unwrap();
+        let sta = res.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(sta.len(), 4);
+        assert_eq!(sta[0].colour1, Colour(0xff, 0x00, 0xff));
+        assert_eq!(sta[1].colour1, Colour(0x00, 0xff, 0xff));
+        assert_eq!(sta[2].colour1, Colour(0xff, 0xff, 0x00));
+        assert_eq!(sta[3].colour1, Colour(0x00, 0xff, 0x00));
+    }
+
+    #[test]
+    fn set_multizone_multimode_config() {
+        let mut config = AuraConfig::default();
+
+        let effect = AuraEffect {
+            zone: AuraZone::Key1,
+            ..Default::default()
+        };
+        config.set_builtin(effect);
+
+        assert!(config.multizone.is_some());
+
+        let effect = AuraEffect {
+            zone: AuraZone::Key2,
+            mode: AuraModeNum::Breathe,
+            ..Default::default()
+        };
+        config.set_builtin(effect);
+
+        let effect = AuraEffect {
+            zone: AuraZone::Key3,
+            mode: AuraModeNum::Comet,
+            ..Default::default()
+        };
+        config.set_builtin(effect);
+
+        let effect = AuraEffect {
+            zone: AuraZone::Key4,
+            mode: AuraModeNum::Pulse,
+            ..Default::default()
+        };
+        config.set_builtin(effect);
+
+        let res = config.multizone.unwrap();
+        let sta = res.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(sta.len(), 1);
+
+        let sta = res.get(&AuraModeNum::Breathe).unwrap();
+        assert_eq!(sta.len(), 1);
+
+        let sta = res.get(&AuraModeNum::Comet).unwrap();
+        assert_eq!(sta.len(), 1);
+
+        let sta = res.get(&AuraModeNum::Pulse).unwrap();
+        assert_eq!(sta.len(), 1);
+    }
+}

daemon/src/ctrl_aura/controller.rs

@@ -0,0 +1,509 @@
+use crate::{
+    error::RogError,
+    laptops::{LaptopLedData, ASUS_KEYBOARD_DEVICES},
+};
+use log::{info, warn};
+use rog_aura::{
+    usb::{AuraDevice, LED_APPLY, LED_SET},
+    AuraEffect, KeyColourArray, LedBrightness, PerKeyRaw, LED_MSG_LEN,
+};
+use rog_aura::{AuraZone, Direction, Speed, GRADIENT};
+use rog_platform::{hid_raw::HidRaw, keyboard_led::KeyboardLed, supported::LedSupportedFunctions};
+use std::collections::BTreeMap;
+
+use crate::GetSupported;
+
+use super::config::{AuraConfig, AuraPowerConfig};
+
+impl GetSupported for CtrlKbdLed {
+    type A = LedSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        // let mode = <&str>::from(&<AuraModes>::from(*mode));
+        let laptop = LaptopLedData::get_data();
+        let stock_led_modes = laptop.standard;
+        let multizone_led_mode = laptop.multizone;
+        let per_key_led_mode = laptop.per_key;
+
+        let mut prod_id = AuraDevice::Unknown;
+        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+            if HidRaw::new(prod).is_ok() {
+                prod_id = AuraDevice::from(*prod);
+                break;
+            }
+        }
+
+        let rgb = KeyboardLed::new();
+        if let Ok(p) = rgb.as_ref() {
+            if p.has_kbd_rgb_mode() {
+                prod_id = AuraDevice::Tuf;
+            }
+        }
+
+        LedSupportedFunctions {
+            prod_id,
+            brightness_set: rgb.is_ok(),
+            stock_led_modes,
+            multizone_led_mode,
+            per_key_led_mode,
+        }
+    }
+}
+
+#[derive(Debug, PartialEq, Eq, PartialOrd)]
+pub enum LEDNode {
+    KbdLed(KeyboardLed),
+    Rog(HidRaw),
+    None,
+}
+
+pub struct CtrlKbdLed {
+    // TODO: config stores the keyboard type as an AuraPower, use or update this
+    pub led_prod: Option<String>,
+    pub led_node: LEDNode,
+    pub kd_brightness: KeyboardLed,
+    pub supported_modes: LaptopLedData,
+    pub flip_effect_write: bool,
+    pub per_key_mode_active: bool,
+    pub config: AuraConfig,
+}
+
+impl CtrlKbdLed {
+    pub fn new(supported_modes: LaptopLedData, config: AuraConfig) -> Result<Self, RogError> {
+        let mut led_prod = None;
+        let mut led_node = None;
+        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+            match HidRaw::new(prod) {
+                Ok(node) => {
+                    led_prod = Some(prod.to_string());
+                    led_node = Some(node);
+                    info!("Looked for keyboard controller 0x{prod}: Found");
+                    break;
+                }
+                Err(err) => info!("Looked for keyboard controller 0x{prod}: {err}"),
+            }
+        }
+
+        let rgb_led = KeyboardLed::new()?;
+
+        if led_node.is_none() && !rgb_led.has_kbd_rgb_mode() {
+            let dmi = sysfs_class::DmiId::default();
+            if let Ok(prod_family) = dmi.product_family() {
+                if prod_family.contains("TUF") {
+                    warn!("A kernel patch is in progress for TUF RGB support");
+                }
+            }
+            return Err(RogError::NoAuraKeyboard);
+        }
+
+        let led_node = if let Some(rog) = led_node {
+            info!("Found ROG USB keyboard");
+            LEDNode::Rog(rog)
+        } else if rgb_led.has_kbd_rgb_mode() {
+            info!("Found TUF keyboard");
+            LEDNode::KbdLed(rgb_led.clone())
+        } else {
+            LEDNode::None
+        };
+
+        let ctrl = CtrlKbdLed {
+            led_prod,
+            led_node,
+            kd_brightness: rgb_led, // If was none then we already returned above
+            supported_modes,
+            flip_effect_write: false,
+            per_key_mode_active: false,
+            config,
+        };
+        Ok(ctrl)
+    }
+
+    pub(super) fn get_brightness(&self) -> Result<u8, RogError> {
+        self.kd_brightness
+            .get_brightness()
+            .map_err(RogError::Platform)
+    }
+
+    pub(super) fn set_brightness(&self, brightness: LedBrightness) -> Result<(), RogError> {
+        self.kd_brightness
+            .set_brightness(brightness as u8)
+            .map_err(RogError::Platform)
+    }
+
+    pub fn next_brightness(&mut self) -> Result<(), RogError> {
+        let mut bright = (self.config.brightness as u32) + 1;
+        if bright > 3 {
+            bright = 0;
+        }
+        self.config.brightness = <LedBrightness>::from(bright);
+        self.config.write();
+        self.set_brightness(self.config.brightness)
+    }
+
+    pub fn prev_brightness(&mut self) -> Result<(), RogError> {
+        let mut bright = self.config.brightness as u32;
+        if bright == 0 {
+            bright = 3;
+        } else {
+            bright -= 1;
+        }
+        self.config.brightness = <LedBrightness>::from(bright);
+        self.config.write();
+        self.set_brightness(self.config.brightness)
+    }
+
+    /// Set combination state for boot animation/sleep animation/all leds/keys leds/side leds LED active
+    pub(super) fn set_power_states(&mut self) -> Result<(), RogError> {
+        if let LEDNode::KbdLed(platform) = &mut self.led_node {
+            if let Some(pwr) = AuraPowerConfig::to_tuf_bool_array(&self.config.enabled) {
+                let buf = [1, pwr[1] as u8, pwr[2] as u8, pwr[3] as u8, pwr[4] as u8];
+                platform.set_kbd_rgb_state(&buf)?;
+            }
+        } else if let LEDNode::Rog(hid_raw) = &self.led_node {
+            let bytes = AuraPowerConfig::to_bytes(&self.config.enabled);
+            let message = [0x5d, 0xbd, 0x01, bytes[0], bytes[1], bytes[2]];
+
+            hid_raw.write_bytes(&message)?;
+            hid_raw.write_bytes(&LED_SET)?;
+            // Changes won't persist unless apply is set
+            hid_raw.write_bytes(&LED_APPLY)?;
+        }
+        Ok(())
+    }
+
+    /// Set an Aura effect if the effect mode or zone is supported.
+    ///
+    /// On success the aura config file is read to refresh cached values, then the effect is
+    /// stored and config written to disk.
+    pub(crate) fn set_effect(&mut self, effect: AuraEffect) -> Result<(), RogError> {
+        if !self.supported_modes.standard.contains(&effect.mode)
+            || effect.zone != AuraZone::None
+                && !self.supported_modes.multizone.contains(&effect.zone)
+        {
+            return Err(RogError::AuraEffectNotSupported);
+        }
+
+        self.write_mode(&effect)?;
+        self.config.read(); // refresh config if successful
+        self.config.set_builtin(effect);
+        self.config.write();
+        Ok(())
+    }
+
+    /// Write an effect block. This is for per-key, but can be repurposed to
+    /// write the raw factory mode packets - when doing this it is expected that
+    /// only the first `Vec` (`effect[0]`) is valid.
+    pub fn write_effect_block(&mut self, effect: &PerKeyRaw) -> Result<(), RogError> {
+        let pkt_type = effect[0][1];
+        const PER_KEY_TYPE: u8 = 0xbc;
+
+        if pkt_type != PER_KEY_TYPE {
+            self.per_key_mode_active = false;
+            if let LEDNode::Rog(hid_raw) = &self.led_node {
+                hid_raw.write_bytes(&effect[0])?;
+                hid_raw.write_bytes(&LED_SET)?;
+                // hid_raw.write_bytes(&LED_APPLY)?;
+            }
+        } else {
+            if !self.per_key_mode_active {
+                if let LEDNode::Rog(hid_raw) = &self.led_node {
+                    let init = KeyColourArray::get_init_msg();
+                    hid_raw.write_bytes(&init)?;
+                }
+                self.per_key_mode_active = true;
+            }
+            if let LEDNode::Rog(hid_raw) = &self.led_node {
+                for row in effect.iter() {
+                    hid_raw.write_bytes(row)?;
+                }
+            } else if let LEDNode::KbdLed(tuf) = &self.led_node {
+                for row in effect.iter() {
+                    let r = row[9];
+                    let g = row[10];
+                    let b = row[11];
+                    tuf.set_kbd_rgb_mode(&[0, 0, r, g, b, 0])?;
+                }
+            }
+            self.flip_effect_write = !self.flip_effect_write;
+        }
+        Ok(())
+    }
+
+    pub(super) fn toggle_mode(&mut self, reverse: bool) -> Result<(), RogError> {
+        let current = self.config.current_mode;
+        if let Some(idx) = self
+            .supported_modes
+            .standard
+            .iter()
+            .position(|v| *v == current)
+        {
+            let mut idx = idx;
+            // goes past end of array
+            if reverse {
+                if idx == 0 {
+                    idx = self.supported_modes.standard.len() - 1;
+                } else {
+                    idx -= 1;
+                }
+            } else {
+                idx += 1;
+                if idx == self.supported_modes.standard.len() {
+                    idx = 0;
+                }
+            }
+            let next = self.supported_modes.standard[idx];
+
+            self.config.read();
+            // if self.config.builtins.contains_key(&next) {
+            self.config.current_mode = next;
+            self.write_current_config_mode()?;
+            // }
+            self.config.write();
+        }
+
+        Ok(())
+    }
+
+    fn write_mode(&mut self, mode: &AuraEffect) -> Result<(), RogError> {
+        if let LEDNode::KbdLed(platform) = &self.led_node {
+            let buf = [
+                1,
+                mode.mode as u8,
+                mode.colour1.0,
+                mode.colour1.1,
+                mode.colour1.2,
+                mode.speed as u8,
+            ];
+            platform.set_kbd_rgb_mode(&buf)?;
+        } else if let LEDNode::Rog(hid_raw) = &self.led_node {
+            let bytes: [u8; LED_MSG_LEN] = mode.into();
+            hid_raw.write_bytes(&bytes)?;
+            hid_raw.write_bytes(&LED_SET)?;
+            // Changes won't persist unless apply is set
+            hid_raw.write_bytes(&LED_APPLY)?;
+        } else {
+            return Err(RogError::NoAuraKeyboard);
+        }
+        self.per_key_mode_active = false;
+        Ok(())
+    }
+
+    pub(super) fn write_current_config_mode(&mut self) -> Result<(), RogError> {
+        if self.config.multizone_on {
+            let mode = self.config.current_mode;
+            let mut create = false;
+            // There is no multizone config for this mode so create one here
+            // using the colours of rainbow if it exists, or first available
+            // mode, or random
+            if self.config.multizone.is_none() {
+                create = true;
+            } else if let Some(multizones) = self.config.multizone.as_ref() {
+                if !multizones.contains_key(&mode) {
+                    create = true;
+                }
+            }
+            if create {
+                info!("No user-set config for zone founding, attempting a default");
+                self.create_multizone_default()?;
+            }
+
+            if let Some(multizones) = self.config.multizone.as_mut() {
+                if let Some(set) = multizones.get(&mode) {
+                    for mode in set.clone() {
+                        self.write_mode(&mode)?;
+                    }
+                }
+            }
+        } else {
+            let mode = self.config.current_mode;
+            if let Some(effect) = self.config.builtins.get(&mode).cloned() {
+                self.write_mode(&effect)?;
+            }
+        }
+
+        Ok(())
+    }
+
+    /// Create a default for the `current_mode` if multizone and no config exists.
+    fn create_multizone_default(&mut self) -> Result<(), RogError> {
+        let mut default = vec![];
+        for (i, tmp) in self.supported_modes.multizone.iter().enumerate() {
+            default.push(AuraEffect {
+                mode: self.config.current_mode,
+                zone: *tmp,
+                colour1: *GRADIENT.get(i).unwrap_or(&GRADIENT[0]),
+                colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
+                speed: Speed::Med,
+                direction: Direction::Left,
+            })
+        }
+        if default.is_empty() {
+            return Err(RogError::AuraEffectNotSupported);
+        }
+
+        if let Some(multizones) = self.config.multizone.as_mut() {
+            multizones.insert(self.config.current_mode, default);
+        } else {
+            let mut tmp = BTreeMap::new();
+            tmp.insert(self.config.current_mode, default);
+            self.config.multizone = Some(tmp);
+        }
+        Ok(())
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Colour};
+    use rog_platform::keyboard_led::KeyboardLed;
+
+    use crate::{
+        ctrl_aura::{config::AuraConfig, controller::LEDNode},
+        laptops::LaptopLedData,
+    };
+
+    use super::CtrlKbdLed;
+
+    #[test]
+    // #[ignore = "Must be manually run due to detection stage"]
+    fn check_set_mode_errors() {
+        // Checking to ensure set_mode errors when unsupported modes are tried
+        let config = AuraConfig::default();
+        let supported_modes = LaptopLedData {
+            prod_family: "".into(),
+            board_names: vec![],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![],
+            per_key: false,
+        };
+        let mut controller = CtrlKbdLed {
+            led_prod: None,
+            led_node: LEDNode::None,
+            kd_brightness: KeyboardLed::default(),
+            supported_modes,
+            flip_effect_write: false,
+            per_key_mode_active: false,
+            config,
+        };
+
+        let mut effect = AuraEffect {
+            colour1: Colour(0xff, 0x00, 0xff),
+            zone: AuraZone::None,
+            ..Default::default()
+        };
+
+        // This error comes from write_bytes because we don't have a keyboard node stored
+        assert_eq!(
+            controller
+                .set_effect(effect.clone())
+                .unwrap_err()
+                .to_string(),
+            "No supported Aura keyboard"
+        );
+
+        effect.mode = AuraModeNum::Laser;
+        assert_eq!(
+            controller
+                .set_effect(effect.clone())
+                .unwrap_err()
+                .to_string(),
+            "Aura effect not supported"
+        );
+
+        effect.mode = AuraModeNum::Static;
+        effect.zone = AuraZone::Key2;
+        assert_eq!(
+            controller
+                .set_effect(effect.clone())
+                .unwrap_err()
+                .to_string(),
+            "Aura effect not supported"
+        );
+
+        controller.supported_modes.multizone.push(AuraZone::Key2);
+        assert_eq!(
+            controller.set_effect(effect).unwrap_err().to_string(),
+            "No supported Aura keyboard"
+        );
+    }
+
+    #[test]
+    fn create_multizone_if_no_config() {
+        // Checking to ensure set_mode errors when unsupported modes are tried
+        let config = AuraConfig::default();
+        let supported_modes = LaptopLedData {
+            prod_family: "".into(),
+            board_names: vec![],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![],
+            per_key: false,
+        };
+        let mut controller = CtrlKbdLed {
+            led_prod: None,
+            led_node: LEDNode::None,
+            kd_brightness: KeyboardLed::default(),
+            supported_modes,
+            flip_effect_write: false,
+            per_key_mode_active: false,
+            config,
+        };
+
+        assert!(controller.config.multizone.is_none());
+        assert!(controller.create_multizone_default().is_err());
+        assert!(controller.config.multizone.is_none());
+
+        controller.supported_modes.multizone.push(AuraZone::Key1);
+        controller.supported_modes.multizone.push(AuraZone::Key2);
+        assert!(controller.create_multizone_default().is_ok());
+        assert!(controller.config.multizone.is_some());
+
+        let m = controller.config.multizone.unwrap();
+        assert!(m.contains_key(&AuraModeNum::Static));
+        let e = m.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(e.len(), 2);
+        assert_eq!(e[0].zone, AuraZone::Key1);
+        assert_eq!(e[1].zone, AuraZone::Key2);
+    }
+
+    #[test]
+    fn next_mode_create_multizone_if_no_config() {
+        // Checking to ensure set_mode errors when unsupported modes are tried
+        let config = AuraConfig::default();
+        let supported_modes = LaptopLedData {
+            prod_family: "".into(),
+            board_names: vec![],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![AuraZone::Key1, AuraZone::Key2],
+            per_key: false,
+        };
+        let mut controller = CtrlKbdLed {
+            led_prod: None,
+            led_node: LEDNode::None,
+            kd_brightness: KeyboardLed::default(),
+            supported_modes,
+            flip_effect_write: false,
+            per_key_mode_active: false,
+            config,
+        };
+
+        assert!(controller.config.multizone.is_none());
+        controller.config.multizone_on = true;
+        // This is called in toggle_mode. It will error here because we have no
+        // keyboard node in tests.
+        assert_eq!(
+            controller
+                .write_current_config_mode()
+                .unwrap_err()
+                .to_string(),
+            "No supported Aura keyboard"
+        );
+        assert!(controller.config.multizone.is_some());
+
+        let m = controller.config.multizone.unwrap();
+        assert!(m.contains_key(&AuraModeNum::Static));
+        let e = m.get(&AuraModeNum::Static).unwrap();
+        assert_eq!(e.len(), 2);
+        assert_eq!(e[0].zone, AuraZone::Key1);
+        assert_eq!(e[1].zone, AuraZone::Key2);
+    }
+}

daemon/src/ctrl_aura/mod.rs

@@ -0,0 +1,4 @@
+pub mod config;
+pub mod controller;
+/// Implements CtrlTask, Reloadable, ZbusRun
+pub mod trait_impls;

daemon/src/ctrl_aura/trait_impls.rs

@@ -0,0 +1,320 @@
+use async_trait::async_trait;
+use log::{error, info, warn};
+use rog_aura::{usb::AuraPowerDev, AuraEffect, AuraModeNum, LedBrightness, PerKeyRaw};
+use std::{collections::BTreeMap, sync::Arc};
+use zbus::{
+    dbus_interface,
+    export::futures_util::{
+        lock::{Mutex, MutexGuard},
+        StreamExt,
+    },
+    Connection, SignalContext,
+};
+
+use crate::{error::RogError, CtrlTask};
+
+use super::controller::CtrlKbdLed;
+
+pub(super) const ZBUS_PATH: &str = "/org/asuslinux/Aura";
+
+#[derive(Clone)]
+pub struct CtrlKbdLedZbus(pub Arc<Mutex<CtrlKbdLed>>);
+
+impl CtrlKbdLedZbus {
+    fn update_config(lock: &mut CtrlKbdLed) -> Result<(), RogError> {
+        let bright = lock.kd_brightness.get_brightness()?;
+        lock.config.read();
+        lock.config.brightness = (bright as u32).into();
+        lock.config.write();
+        Ok(())
+    }
+}
+
+#[async_trait]
+impl crate::ZbusRun for CtrlKbdLedZbus {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, ZBUS_PATH, server).await;
+    }
+}
+
+/// The main interface for changing, reading, or notfying signals
+///
+/// LED commands are split between Brightness, Modes, Per-Key
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlKbdLedZbus {
+    /// Set the keyboard brightness level (0-3)
+    async fn set_brightness(&mut self, brightness: LedBrightness) {
+        let ctrl = self.0.lock().await;
+        ctrl.set_brightness(brightness)
+            .map_err(|err| warn!("{}", err))
+            .ok();
+    }
+
+    /// Set a variety of states, input is array of enum.
+    /// `enabled` sets if the sent array should be disabled or enabled
+    ///
+    /// ```text
+    /// pub struct AuraPowerDev {
+    ///     pub x1866: Vec<AuraDev1866>,
+    ///     pub x19b6: Vec<AuraDev19b6>,
+    /// }
+    /// pub enum AuraDev1866 {
+    ///     Awake,
+    ///     Keyboard,
+    ///     Lightbar,
+    ///     Boot,
+    ///     Sleep,
+    /// }
+    /// enum AuraDev19b6 {
+    ///     BootLogo,
+    ///     BootKeyb,
+    ///     AwakeLogo,
+    ///     AwakeKeyb,
+    ///     SleepLogo,
+    ///     SleepKeyb,
+    ///     ShutdownLogo,
+    ///     ShutdownKeyb,
+    ///     AwakeBar,
+    ///     BootBar,
+    ///     SleepBar,
+    ///     ShutdownBar,
+    /// }
+    /// ```
+    async fn set_leds_power(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        options: AuraPowerDev,
+        enabled: bool,
+    ) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        for p in options.tuf {
+            ctrl.config.enabled.set_tuf(p, enabled);
+        }
+        for p in options.x1866 {
+            ctrl.config.enabled.set_0x1866(p, enabled);
+        }
+        for p in options.x19b6 {
+            ctrl.config.enabled.set_0x19b6(p, enabled);
+        }
+
+        ctrl.config.write();
+
+        ctrl.set_power_states().map_err(|e| {
+            warn!("{}", e);
+            e
+        })?;
+
+        Self::notify_power_states(&ctxt, &AuraPowerDev::from(&ctrl.config.enabled))
+            .await
+            .unwrap_or_else(|err| warn!("{}", err));
+        Ok(())
+    }
+
+    async fn set_led_mode(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        effect: AuraEffect,
+    ) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+
+        ctrl.set_effect(effect).map_err(|e| {
+            warn!("{}", e);
+            e
+        })?;
+
+        if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+            Self::notify_led(&ctxt, mode.clone())
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+        Ok(())
+    }
+
+    async fn next_led_mode(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+    ) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+
+        ctrl.toggle_mode(false).map_err(|e| {
+            warn!("{}", e);
+            e
+        })?;
+
+        if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+            Self::notify_led(&ctxt, mode.clone())
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+
+        Ok(())
+    }
+
+    async fn prev_led_mode(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+    ) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+
+        ctrl.toggle_mode(true).map_err(|e| {
+            warn!("{}", e);
+            e
+        })?;
+
+        if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+            Self::notify_led(&ctxt, mode.clone())
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+
+        Ok(())
+    }
+
+    async fn next_led_brightness(&self) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.next_brightness().map_err(|e| {
+            warn!("{}", e);
+            e
+        })?;
+        Ok(())
+    }
+
+    async fn prev_led_brightness(&self) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.prev_brightness().map_err(|e| {
+            warn!("{}", e);
+            e
+        })?;
+        Ok(())
+    }
+
+    // As property doesn't work for AuraPowerDev (complexity of serialization?)
+    // #[dbus_interface(property)]
+    async fn leds_enabled(&self) -> AuraPowerDev {
+        let ctrl = self.0.lock().await;
+        AuraPowerDev::from(&ctrl.config.enabled)
+    }
+
+    /// Return the current mode data
+    async fn led_mode(&self) -> AuraModeNum {
+        let ctrl = self.0.lock().await;
+        ctrl.config.current_mode
+    }
+
+    /// Return a list of available modes
+    async fn led_modes(&self) -> BTreeMap<AuraModeNum, AuraEffect> {
+        let ctrl = self.0.lock().await;
+        ctrl.config.builtins.clone()
+    }
+
+    async fn per_key_raw(&self, data: PerKeyRaw) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.write_effect_block(&data)?;
+        Ok(())
+    }
+
+    /// Return the current LED brightness
+    #[dbus_interface(property)]
+    async fn led_brightness(&self) -> i8 {
+        let ctrl = self.0.lock().await;
+        ctrl.get_brightness().map(|n| n as i8).unwrap_or(-1)
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_led(signal_ctxt: &SignalContext<'_>, data: AuraEffect) -> zbus::Result<()>;
+
+    #[dbus_interface(signal)]
+    async fn notify_power_states(
+        signal_ctxt: &SignalContext<'_>,
+        data: &AuraPowerDev,
+    ) -> zbus::Result<()>;
+}
+
+#[async_trait]
+impl CtrlTask for CtrlKbdLedZbus {
+    fn zbus_path() -> &'static str {
+        ZBUS_PATH
+    }
+
+    async fn create_tasks(&self, _: SignalContext<'static>) -> Result<(), RogError> {
+        let load_save = |start: bool, mut lock: MutexGuard<CtrlKbdLed>| {
+            // If waking up
+            if !start {
+                info!("CtrlKbdLedTask reloading brightness and modes");
+                lock.set_brightness(lock.config.brightness)
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+                lock.write_current_config_mode()
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+            } else if start {
+                info!("CtrlKbdLedTask saving last brightness");
+                Self::update_config(&mut lock)
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+            }
+        };
+
+        let inner1 = self.0.clone();
+        let inner2 = self.0.clone();
+        let inner3 = self.0.clone();
+        let inner4 = self.0.clone();
+        self.create_sys_event_tasks(
+            // Loop so that we do aquire the lock but also don't block other
+            // threads (prevents potential deadlocks)
+            move || loop {
+                if let Some(lock) = inner1.try_lock() {
+                    load_save(true, lock);
+                    break;
+                }
+            },
+            move || loop {
+                if let Some(lock) = inner2.try_lock() {
+                    load_save(false, lock);
+                    break;
+                }
+            },
+            move || loop {
+                if let Some(lock) = inner3.try_lock() {
+                    load_save(true, lock);
+                    break;
+                }
+            },
+            move || loop {
+                if let Some(lock) = inner4.try_lock() {
+                    load_save(false, lock);
+                    break;
+                }
+            },
+        )
+        .await;
+
+        let ctrl2 = self.0.clone();
+        let ctrl = self.0.lock().await;
+        let mut watch = ctrl.kd_brightness.monitor_brightness()?;
+        tokio::spawn(async move {
+            let mut buffer = [0; 32];
+            watch
+                .event_stream(&mut buffer)
+                .unwrap()
+                .for_each(|_| async {
+                    if let Some(lock) = ctrl2.try_lock() {
+                        load_save(true, lock);
+                    }
+                })
+                .await;
+        });
+
+        Ok(())
+    }
+}
+
+#[async_trait]
+impl crate::Reloadable for CtrlKbdLedZbus {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.write_current_config_mode()?;
+        ctrl.set_power_states().map_err(|err| warn!("{err}")).ok();
+        Ok(())
+    }
+}

daemon/src/ctrl_platform.rs

@@ -0,0 +1,375 @@
+use crate::{config::Config, error::RogError, GetSupported};
+use crate::{task_watch_item, CtrlTask};
+use async_trait::async_trait;
+use log::{info, warn};
+use rog_platform::platform::{AsusPlatform, GpuMode};
+use rog_platform::supported::RogBiosSupportedFunctions;
+use std::fs::OpenOptions;
+use std::io::{Read, Write};
+use std::path::Path;
+use std::process::Command;
+use std::sync::Arc;
+use zbus::export::futures_util::lock::Mutex;
+use zbus::Connection;
+use zbus::{dbus_interface, SignalContext};
+
+const ZBUS_PATH: &str = "/org/asuslinux/Platform";
+const ASUS_POST_LOGO_SOUND: &str =
+    "/sys/firmware/efi/efivars/AsusPostLogoSound-607005d5-3f75-4b2e-98f0-85ba66797a3e";
+
+#[derive(Clone)]
+pub struct CtrlPlatform {
+    platform: AsusPlatform,
+    config: Arc<Mutex<Config>>,
+}
+
+impl GetSupported for CtrlPlatform {
+    type A = RogBiosSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        let mut panel_overdrive = false;
+        let mut dgpu_disable = false;
+        let mut egpu_enable = false;
+        let mut gpu_mux = false;
+
+        if let Ok(platform) = AsusPlatform::new() {
+            panel_overdrive = platform.has_panel_od();
+            dgpu_disable = platform.has_dgpu_disable();
+            egpu_enable = platform.has_egpu_enable();
+            gpu_mux = platform.has_gpu_mux_mode();
+        }
+
+        RogBiosSupportedFunctions {
+            post_sound: Path::new(ASUS_POST_LOGO_SOUND).exists(),
+            gpu_mux,
+            panel_overdrive,
+            dgpu_disable,
+            egpu_enable,
+        }
+    }
+}
+
+impl CtrlPlatform {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        let platform = AsusPlatform::new()?;
+
+        if !platform.has_gpu_mux_mode() {
+            info!("G-Sync Switchable Graphics or GPU MUX not detected");
+            info!("Standard graphics switching will still work.");
+        }
+
+        if Path::new(ASUS_POST_LOGO_SOUND).exists() {
+            CtrlPlatform::set_path_mutable(ASUS_POST_LOGO_SOUND)?;
+        } else {
+            info!("Switch for POST boot sound not detected");
+        }
+
+        Ok(CtrlPlatform { platform, config })
+    }
+
+    fn set_path_mutable(path: &str) -> Result<(), RogError> {
+        let output = Command::new("/usr/bin/chattr")
+            .arg("-i")
+            .arg(path)
+            .output()
+            .map_err(|err| RogError::Path(path.into(), err))?;
+        info!("Set {} writeable: status: {}", path, output.status);
+        Ok(())
+    }
+
+    fn set_gfx_mode(&self, mode: GpuMode) -> Result<(), RogError> {
+        self.platform.set_gpu_mux_mode(mode.to_mux_attr())?;
+        // self.update_initramfs(enable)?;
+        if mode == GpuMode::Discrete {
+            info!("Set system-level graphics mode: Dedicated Nvidia");
+        } else {
+            info!("Set system-level graphics mode: Optimus");
+        }
+        Ok(())
+    }
+
+    pub fn get_boot_sound() -> Result<i8, RogError> {
+        let path = ASUS_POST_LOGO_SOUND;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        Ok(data[idx] as i8)
+    }
+
+    pub(super) fn set_boot_sound(on: bool) -> Result<(), RogError> {
+        let path = ASUS_POST_LOGO_SOUND;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        if on {
+            data[idx] = 1;
+            info!("Set boot POST sound on");
+        } else {
+            data[idx] = 0;
+            info!("Set boot POST sound off");
+        }
+        file.write_all(&data)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        Ok(())
+    }
+
+    fn set_panel_overdrive(&self, enable: bool) -> Result<(), RogError> {
+        self.platform.set_panel_od(enable).map_err(|err| {
+            warn!("CtrlRogBios: set_panel_overdrive {}", err);
+            err
+        })?;
+        Ok(())
+    }
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlPlatform {
+    async fn set_gpu_mux_mode(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        mode: GpuMode,
+    ) {
+        self.set_gfx_mode(mode)
+            .map_err(|err| {
+                warn!("CtrlRogBios: set_gpu_mux_mode {}", err);
+                err
+            })
+            .ok();
+        Self::notify_gpu_mux_mode(&ctxt, mode).await.ok();
+    }
+
+    fn gpu_mux_mode(&self) -> GpuMode {
+        match self.platform.get_gpu_mux_mode() {
+            Ok(m) => GpuMode::from_mux(m as u8),
+            Err(e) => {
+                warn!("CtrlRogBios: get_gfx_mode {}", e);
+                GpuMode::Error
+            }
+        }
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_gpu_mux_mode(
+        signal_ctxt: &SignalContext<'_>,
+        mode: GpuMode,
+    ) -> zbus::Result<()> {
+    }
+
+    async fn set_post_boot_sound(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        on: bool,
+    ) {
+        Self::set_boot_sound(on)
+            .map_err(|err| {
+                warn!("CtrlRogBios: set_post_boot_sound {}", err);
+                err
+            })
+            .ok();
+        Self::notify_post_boot_sound(&ctxt, on).await.ok();
+    }
+
+    fn post_boot_sound(&self) -> i8 {
+        Self::get_boot_sound()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_boot_sound {}", err);
+                err
+            })
+            .unwrap_or(-1)
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_post_boot_sound(ctxt: &SignalContext<'_>, on: bool) -> zbus::Result<()> {}
+
+    async fn set_panel_od(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        overdrive: bool,
+    ) {
+        match self.platform.set_panel_od(overdrive) {
+            Ok(_) => {
+                if let Some(mut lock) = self.config.try_lock() {
+                    lock.panel_od = overdrive;
+                    lock.write();
+                }
+                Self::notify_panel_od(&ctxt, overdrive).await.ok();
+            }
+            Err(err) => warn!("CtrlRogBios: set_panel_overdrive {}", err),
+        };
+    }
+
+    /// Get the `panel_od` value from platform. Updates the stored value in internal config also.
+    fn panel_od(&self) -> bool {
+        let od = self
+            .platform
+            .get_panel_od()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_panel_od {}", err);
+                err
+            })
+            .unwrap_or(false);
+        if let Some(mut lock) = self.config.try_lock() {
+            lock.panel_od = od;
+            lock.write();
+        }
+        od
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_panel_od(signal_ctxt: &SignalContext<'_>, overdrive: bool) -> zbus::Result<()> {
+    }
+
+    async fn set_dgpu_disable(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        disable: bool,
+    ) {
+        match self.platform.set_dgpu_disable(disable) {
+            Ok(_) => {
+                Self::notify_dgpu_disable(&ctxt, disable).await.ok();
+            }
+            Err(err) => warn!("CtrlRogBios: set_dgpu_disable {}", err),
+        };
+    }
+
+    fn dgpu_disable(&self) -> bool {
+        self.platform
+            .get_dgpu_disable()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_dgpu_disable {}", err);
+                err
+            })
+            .unwrap_or(false)
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_dgpu_disable(
+        signal_ctxt: &SignalContext<'_>,
+        disable: bool,
+    ) -> zbus::Result<()> {
+    }
+
+    async fn set_egpu_enable(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        enable: bool,
+    ) {
+        match self.platform.set_egpu_enable(enable) {
+            Ok(_) => {
+                Self::notify_egpu_enable(&ctxt, enable).await.ok();
+            }
+            Err(err) => warn!("CtrlRogBios: set_egpu_enable {}", err),
+        };
+    }
+
+    fn egpu_enable(&self) -> bool {
+        self.platform
+            .get_egpu_enable()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_egpu_enable {}", err);
+                err
+            })
+            .unwrap_or(false)
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_egpu_enable(signal_ctxt: &SignalContext<'_>, enable: bool) -> zbus::Result<()> {
+    }
+}
+
+#[async_trait]
+impl crate::ZbusRun for CtrlPlatform {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Platform", server).await;
+    }
+}
+
+#[async_trait]
+impl crate::Reloadable for CtrlPlatform {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        if self.platform.has_panel_od() {
+            let p = if let Some(lock) = self.config.try_lock() {
+                lock.panel_od
+            } else {
+                false
+            };
+            self.set_panel_overdrive(p)?;
+        }
+        Ok(())
+    }
+}
+
+impl CtrlPlatform {
+    task_watch_item!(panel_od platform);
+    task_watch_item!(dgpu_disable platform);
+    task_watch_item!(egpu_enable platform);
+    task_watch_item!(gpu_mux_mode platform);
+}
+
+#[async_trait]
+impl CtrlTask for CtrlPlatform {
+    fn zbus_path() -> &'static str {
+        ZBUS_PATH
+    }
+
+    async fn create_tasks(&self, signal_ctxt: SignalContext<'static>) -> Result<(), RogError> {
+        let platform1 = self.clone();
+        let platform2 = self.clone();
+        self.create_sys_event_tasks(
+            move || {},
+            move || {
+                info!("CtrlRogBios reloading panel_od");
+                if let Some(lock) = platform1.config.try_lock() {
+                    if platform1.platform.has_panel_od() {
+                        platform1
+                            .set_panel_overdrive(lock.panel_od)
+                            .map_err(|err| {
+                                warn!("CtrlCharge: set_limit {}", err);
+                                err
+                            })
+                            .ok();
+                    }
+                }
+            },
+            move || {},
+            move || {
+                info!("CtrlRogBios reloading panel_od");
+                if let Some(lock) = platform2.config.try_lock() {
+                    if platform2.platform.has_panel_od() {
+                        platform2
+                            .set_panel_overdrive(lock.panel_od)
+                            .map_err(|err| {
+                                warn!("CtrlCharge: set_limit {}", err);
+                                err
+                            })
+                            .ok();
+                    }
+                }
+            },
+        )
+        .await;
+
+        self.watch_panel_od(signal_ctxt.clone()).await?;
+        self.watch_dgpu_disable(signal_ctxt.clone()).await?;
+        self.watch_egpu_enable(signal_ctxt.clone()).await?;
+        self.watch_gpu_mux_mode(signal_ctxt.clone()).await?;
+
+        Ok(())
+    }
+}

daemon/src/ctrl_power.rs

@@ -0,0 +1,239 @@
+use crate::systemd::{do_systemd_unit_action, SystemdUnitAction};
+use crate::{config::Config, error::RogError, GetSupported};
+use crate::{task_watch_item, CtrlTask};
+use async_trait::async_trait;
+use log::{info, warn};
+use rog_platform::power::AsusPower;
+use rog_platform::supported::ChargeSupportedFunctions;
+use std::sync::Arc;
+use std::time::Duration;
+use tokio::time::sleep;
+use zbus::dbus_interface;
+use zbus::export::futures_util::lock::Mutex;
+use zbus::Connection;
+use zbus::SignalContext;
+
+const ZBUS_PATH: &str = "/org/asuslinux/Power";
+const NVIDIA_POWERD: &str = "nvidia-powerd.service";
+
+impl GetSupported for CtrlPower {
+    type A = ChargeSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        ChargeSupportedFunctions {
+            charge_level_set: if let Ok(power) = AsusPower::new() {
+                power.has_charge_control_end_threshold()
+            } else {
+                false
+            },
+        }
+    }
+}
+
+#[derive(Clone)]
+pub struct CtrlPower {
+    power: AsusPower,
+    config: Arc<Mutex<Config>>,
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlPower {
+    async fn set_charge_control_end_threshold(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        limit: u8,
+    ) -> zbus::fdo::Result<()> {
+        if !(20..=100).contains(&limit) {
+            return Err(RogError::ChargeLimit(limit))?;
+        }
+        self.set(limit)
+            .map_err(|err| {
+                warn!("CtrlCharge: set_limit {}", err);
+                err
+            })
+            .ok();
+        Self::notify_charge_control_end_threshold(&ctxt, limit)
+            .await
+            .ok();
+        Ok(())
+    }
+
+    fn charge_control_end_threshold(&self) -> u8 {
+        loop {
+            if let Some(mut config) = self.config.try_lock() {
+                let limit = self
+                    .power
+                    .get_charge_control_end_threshold()
+                    .map_err(|err| {
+                        warn!("CtrlCharge: get_charge_control_end_threshold {}", err);
+                        err
+                    })
+                    .unwrap_or(100);
+
+                config.read();
+                config.bat_charge_limit = limit;
+                config.write();
+
+                return config.bat_charge_limit;
+            }
+        }
+    }
+
+    fn mains_online(&self) -> bool {
+        if self.power.has_online() {
+            if let Ok(v) = self.power.get_online() {
+                return v == 1;
+            }
+        }
+        false
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_charge_control_end_threshold(
+        ctxt: &SignalContext<'_>,
+        limit: u8,
+    ) -> zbus::Result<()>;
+
+    #[dbus_interface(signal)]
+    async fn notify_mains_online(ctxt: &SignalContext<'_>, on: bool) -> zbus::Result<()>;
+}
+
+#[async_trait]
+impl crate::ZbusRun for CtrlPower {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, ZBUS_PATH, server).await;
+    }
+}
+
+#[async_trait]
+impl crate::Reloadable for CtrlPower {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        if let Some(mut config) = self.config.try_lock() {
+            config.read();
+            self.set(config.bat_charge_limit)?;
+        }
+        Ok(())
+    }
+}
+
+impl CtrlPower {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        Ok(CtrlPower {
+            power: AsusPower::new()?,
+            config,
+        })
+    }
+
+    pub(super) fn set(&self, limit: u8) -> Result<(), RogError> {
+        if !(20..=100).contains(&limit) {
+            return Err(RogError::ChargeLimit(limit));
+        }
+
+        self.power.set_charge_control_end_threshold(limit)?;
+
+        info!("Battery charge limit: {}", limit);
+
+        if let Some(mut config) = self.config.try_lock() {
+            config.read();
+            config.bat_charge_limit = limit;
+            config.write();
+        }
+
+        Ok(())
+    }
+
+    task_watch_item!(charge_control_end_threshold power);
+}
+
+#[async_trait]
+impl CtrlTask for CtrlPower {
+    fn zbus_path() -> &'static str {
+        ZBUS_PATH
+    }
+
+    async fn create_tasks(&self, signal_ctxt: SignalContext<'static>) -> Result<(), RogError> {
+        let power1 = self.clone();
+        let power2 = self.clone();
+        self.create_sys_event_tasks(
+            move || {},
+            move || {
+                info!("CtrlCharge reloading charge limit");
+                if let Some(lock) = power1.config.try_lock() {
+                    power1
+                        .set(lock.bat_charge_limit)
+                        .map_err(|err| {
+                            warn!("CtrlCharge: set_limit {}", err);
+                            err
+                        })
+                        .ok();
+                }
+                if let Ok(value) = power1.power.get_online() {
+                    let action = if value == 1 {
+                        SystemdUnitAction::Restart
+                    } else {
+                        SystemdUnitAction::Stop
+                    };
+                    if do_systemd_unit_action(action, NVIDIA_POWERD).is_ok() {
+                        info!("CtrlPower task: did {action:?} on {NVIDIA_POWERD}");
+                    }
+                }
+            },
+            move || {},
+            move || {
+                info!("CtrlCharge reloading charge limit");
+                if let Some(lock) = power2.config.try_lock() {
+                    power2
+                        .set(lock.bat_charge_limit)
+                        .map_err(|err| {
+                            warn!("CtrlCharge: set_limit {}", err);
+                            err
+                        })
+                        .ok();
+                }
+                if let Ok(value) = power2.power.get_online() {
+                    let action = if value == 1 {
+                        SystemdUnitAction::Restart
+                    } else {
+                        SystemdUnitAction::Stop
+                    };
+                    if do_systemd_unit_action(action, NVIDIA_POWERD).is_ok() {
+                        info!("CtrlPower task: did {action:?} on {NVIDIA_POWERD}");
+                    }
+                }
+            },
+        )
+        .await;
+
+        self.watch_charge_control_end_threshold(signal_ctxt.clone())
+            .await?;
+
+        let ctrl = self.clone();
+        tokio::spawn(async move {
+            let mut online = 10;
+            loop {
+                if let Ok(value) = ctrl.power.get_online() {
+                    if online != value {
+                        online = value;
+                        let action = if value == 1 {
+                            SystemdUnitAction::Restart
+                        } else {
+                            SystemdUnitAction::Stop
+                        };
+                        if do_systemd_unit_action(action, NVIDIA_POWERD).is_ok() {
+                            info!("CtrlPower task: did {action:?} on {NVIDIA_POWERD}");
+                        }
+
+                        Self::notify_mains_online(&signal_ctxt, value == 1)
+                            .await
+                            .unwrap();
+                    }
+                }
+                // The inotify doesn't pick up events when the kernel changes internal value
+                // so we need to watch it with a thread and sleep unfortunately
+                sleep(Duration::from_secs(1)).await;
+            }
+        });
+
+        Ok(())
+    }
+}

daemon/src/ctrl_profiles/config.rs

@@ -0,0 +1,87 @@
+use log::{error, warn};
+use rog_profiles::{FanCurveProfiles, Profile};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+
+#[derive(Deserialize, Serialize, Debug)]
+pub struct ProfileConfig {
+    #[serde(skip)]
+    config_path: String,
+    /// For restore on boot
+    pub active_profile: Profile,
+    /// States to restore
+    pub fan_curves: Option<FanCurveProfiles>,
+}
+
+impl ProfileConfig {
+    fn new(config_path: String) -> Self {
+        Self {
+            config_path,
+            active_profile: Profile::Balanced,
+            fan_curves: None,
+        }
+    }
+
+    pub fn load(config_path: String) -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&config_path)
+            .unwrap_or_else(|_| panic!("The directory /etc/asusd/ is missing")); // okay to cause panic here
+        let mut buf = String::new();
+        let mut config;
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                config = Self::new(config_path);
+            } else if let Ok(data) = toml::from_str(&buf) {
+                config = data;
+                config.config_path = config_path;
+            } else {
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    config_path, config_path
+                );
+                let cfg_old = config_path.clone() + "-old";
+                std::fs::rename(config_path.clone(), cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        config_path, err
+                    )
+                });
+                config = Self::new(config_path);
+            }
+        } else {
+            config = Self::new(config_path);
+        }
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&self.config_path)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", self.config_path, err));
+
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", self.config_path);
+            } else {
+                let mut data: ProfileConfig = toml::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", self.config_path));
+                // copy over serde skipped values
+                data.config_path = self.config_path.clone();
+                *self = data;
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(&self.config_path).expect("Couldn't overwrite config");
+        let data = toml::to_string(self).expect("Parse config to toml failed");
+        file.write_all(data.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+}

daemon/src/ctrl_profiles/controller.rs

@@ -0,0 +1,116 @@
+use crate::error::RogError;
+use crate::GetSupported;
+use log::{info, warn};
+use rog_platform::platform::AsusPlatform;
+use rog_platform::supported::PlatformProfileFunctions;
+use rog_profiles::error::ProfileError;
+use rog_profiles::{FanCurveProfiles, Profile};
+
+use super::config::ProfileConfig;
+
+pub struct CtrlPlatformProfile {
+    pub config: ProfileConfig,
+    pub platform: AsusPlatform,
+}
+
+impl GetSupported for CtrlPlatformProfile {
+    type A = PlatformProfileFunctions;
+
+    fn get_supported() -> Self::A {
+        if !Profile::is_platform_profile_supported() {
+            warn!("platform_profile kernel interface not found, your laptop does not support this, or the interface is missing.");
+        }
+
+        let res = FanCurveProfiles::is_supported();
+        let mut fan_curve_supported = res.is_err();
+        if let Ok(r) = res {
+            fan_curve_supported = r;
+        };
+
+        if !fan_curve_supported {
+            info!("fan curves kernel interface not found, your laptop does not support this, or the interface is missing.");
+        }
+
+        PlatformProfileFunctions {
+            platform_profile: Profile::is_platform_profile_supported(),
+            fan_curves: fan_curve_supported,
+        }
+    }
+}
+
+impl CtrlPlatformProfile {
+    pub fn new(config: ProfileConfig) -> Result<Self, RogError> {
+        let platform = AsusPlatform::new()?;
+        if platform.has_platform_profile() || platform.has_throttle_thermal_policy() {
+            info!("Device has profile control available");
+
+            let mut controller = CtrlPlatformProfile { config, platform };
+            if FanCurveProfiles::get_device().is_ok() {
+                info!("Device has fan curves available");
+                if controller.config.fan_curves.is_none() {
+                    controller.config.fan_curves = Some(Default::default());
+                    for _ in [Profile::Balanced, Profile::Performance, Profile::Quiet] {
+                        controller.set_next_profile()?;
+                        controller.set_active_curve_to_defaults()?;
+
+                        let active = Profile::get_active_profile().unwrap_or(Profile::Balanced);
+                        if let Some(curves) = controller.config.fan_curves.as_ref() {
+                            info!(
+                                "{active:?}: {}",
+                                String::from(curves.get_fan_curves_for(active))
+                            );
+                        }
+                    }
+                }
+            }
+
+            return Ok(controller);
+        }
+
+        Err(ProfileError::NotSupported.into())
+    }
+
+    pub fn save_config(&self) {
+        self.config.write();
+    }
+
+    /// Toggle to next profile in list. This will first read the config, switch, then write out
+    pub(super) fn set_next_profile(&mut self) -> Result<(), RogError> {
+        // Read first just incase the user has modified the config before calling this
+        match self.config.active_profile {
+            Profile::Balanced => {
+                Profile::set_profile(Profile::Performance)?;
+                self.config.active_profile = Profile::Performance;
+            }
+            Profile::Performance => {
+                Profile::set_profile(Profile::Quiet)?;
+                self.config.active_profile = Profile::Quiet;
+            }
+            Profile::Quiet => {
+                Profile::set_profile(Profile::Balanced)?;
+                self.config.active_profile = Profile::Balanced;
+            }
+        }
+        self.write_profile_curve_to_platform()?;
+        Ok(())
+    }
+
+    /// Set the curve for the active profile active
+    pub(super) fn write_profile_curve_to_platform(&mut self) -> Result<(), RogError> {
+        if let Some(curves) = &mut self.config.fan_curves {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                curves.write_profile_curve_to_platform(self.config.active_profile, &mut device)?;
+            }
+        }
+        Ok(())
+    }
+
+    pub(super) fn set_active_curve_to_defaults(&mut self) -> Result<(), RogError> {
+        if let Some(curves) = self.config.fan_curves.as_mut() {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                curves.set_active_curve_to_defaults(self.config.active_profile, &mut device)?;
+            }
+        }
+        Ok(())
+    }
+}

daemon/src/ctrl_profiles/mod.rs

@@ -0,0 +1,4 @@
+pub mod config;
+pub mod controller;
+/// Implements CtrlTask, Reloadable, ZbusRun
+pub mod trait_impls;

daemon/src/ctrl_profiles/trait_impls.rs

@@ -0,0 +1,246 @@
+use async_trait::async_trait;
+use log::warn;
+use rog_profiles::fan_curve_set::CurveData;
+use rog_profiles::fan_curve_set::FanCurveSet;
+use rog_profiles::FanCurveProfiles;
+use rog_profiles::Profile;
+use zbus::export::futures_util::lock::Mutex;
+use zbus::export::futures_util::StreamExt;
+use zbus::Connection;
+use zbus::SignalContext;
+
+use std::sync::Arc;
+use zbus::{dbus_interface, fdo::Error};
+
+use crate::error::RogError;
+use crate::CtrlTask;
+
+use super::controller::CtrlPlatformProfile;
+
+const ZBUS_PATH: &str = "/org/asuslinux/Profile";
+const UNSUPPORTED_MSG: &str =
+    "Fan curves are not supported on this laptop or you require a patched kernel";
+
+#[derive(Clone)]
+pub struct ProfileZbus(pub Arc<Mutex<CtrlPlatformProfile>>);
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl ProfileZbus {
+    /// Fetch profile names
+    fn profiles(&mut self) -> zbus::fdo::Result<Vec<Profile>> {
+        if let Ok(profiles) = Profile::get_profile_names() {
+            return Ok(profiles);
+        }
+        Err(Error::Failed(
+            "Failed to get all profile details".to_string(),
+        ))
+    }
+
+    /// Toggle to next platform_profile. Names provided by `Profiles`.
+    /// If fan-curves are supported will also activate a fan curve for profile.
+    async fn next_profile(&mut self, #[zbus(signal_context)] ctxt: SignalContext<'_>) {
+        let mut ctrl = self.0.lock().await;
+        ctrl.set_next_profile()
+            .unwrap_or_else(|err| warn!("{}", err));
+        ctrl.save_config();
+
+        Self::notify_profile(&ctxt, ctrl.config.active_profile)
+            .await
+            .ok();
+    }
+
+    /// Fetch the active profile name
+    async fn active_profile(&mut self) -> zbus::fdo::Result<Profile> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.config.read();
+        Ok(ctrl.config.active_profile)
+    }
+
+    /// Set this platform_profile name as active
+    async fn set_active_profile(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        profile: Profile,
+    ) {
+        let mut ctrl = self.0.lock().await;
+        // Read first just incase the user has modified the config before calling this
+        ctrl.config.read();
+        Profile::set_profile(profile)
+            .map_err(|e| warn!("set_profile, {}", e))
+            .ok();
+        ctrl.config.active_profile = profile;
+        ctrl.write_profile_curve_to_platform()
+            .map_err(|e| warn!("write_profile_curve_to_platform, {}", e))
+            .ok();
+
+        ctrl.save_config();
+
+        Self::notify_profile(&ctxt, ctrl.config.active_profile)
+            .await
+            .ok();
+    }
+
+    /// Get a list of profiles that have fan-curves enabled.
+    async fn enabled_fan_profiles(&mut self) -> zbus::fdo::Result<Vec<Profile>> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.config.read();
+        if let Some(curves) = &ctrl.config.fan_curves {
+            return Ok(curves.get_enabled_curve_profiles().to_vec());
+        }
+        Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+    }
+
+    /// Set a profile fan curve enabled status. Will also activate a fan curve if in the
+    /// same profile mode
+    async fn set_fan_curve_enabled(
+        &mut self,
+        profile: Profile,
+        enabled: bool,
+    ) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.config.read();
+        if let Some(curves) = &mut ctrl.config.fan_curves {
+            curves.set_profile_curve_enabled(profile, enabled);
+
+            ctrl.write_profile_curve_to_platform()
+                .map_err(|e| warn!("write_profile_curve_to_platform, {}", e))
+                .ok();
+
+            ctrl.save_config();
+            Ok(())
+        } else {
+            Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+        }
+    }
+
+    /// Get the fan-curve data for the currently active Profile
+    async fn fan_curve_data(&mut self, profile: Profile) -> zbus::fdo::Result<FanCurveSet> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.config.read();
+        if let Some(curves) = &ctrl.config.fan_curves {
+            let curve = curves.get_fan_curves_for(profile);
+            return Ok(curve.clone());
+        }
+        Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+    }
+
+    /// Set the fan curve for the specified profile.
+    /// Will also activate the fan curve if the user is in the same mode.
+    async fn set_fan_curve(&self, profile: Profile, curve: CurveData) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.config.read();
+        if let Some(curves) = &mut ctrl.config.fan_curves {
+            curves
+                .save_fan_curve(curve, profile)
+                .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+        } else {
+            return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
+        }
+        ctrl.write_profile_curve_to_platform()
+            .map_err(|e| warn!("Profile::set_profile, {}", e))
+            .ok();
+        ctrl.save_config();
+
+        Ok(())
+    }
+
+    /// Reset the stored (self) and device curve to the defaults of the platform.
+    ///
+    /// Each platform_profile has a different default and the defualt can be read
+    /// only for the currently active profile.
+    async fn set_active_curve_to_defaults(&self) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.config.read();
+        ctrl.set_active_curve_to_defaults()
+            .map_err(|e| warn!("Profile::set_active_curve_to_defaults, {}", e))
+            .ok();
+        ctrl.save_config();
+        Ok(())
+    }
+
+    /// Reset the stored (self) and device curve to the defaults of the platform.
+    ///
+    /// Each platform_profile has a different default and the defualt can be read
+    /// only for the currently active profile.
+    async fn reset_profile_curves(&self, profile: Profile) -> zbus::fdo::Result<()> {
+        let mut ctrl = self.0.lock().await;
+        ctrl.config.read();
+        let active = Profile::get_active_profile().unwrap_or(Profile::Balanced);
+
+        Profile::set_profile(profile)
+            .map_err(|e| warn!("set_profile, {}", e))
+            .ok();
+        ctrl.set_active_curve_to_defaults()
+            .map_err(|e| warn!("Profile::set_active_curve_to_defaults, {}", e))
+            .ok();
+
+        Profile::set_profile(active)
+            .map_err(|e| warn!("set_profile, {}", e))
+            .ok();
+        ctrl.save_config();
+        Ok(())
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_profile(signal_ctxt: &SignalContext<'_>, profile: Profile) -> zbus::Result<()> {
+    }
+}
+
+#[async_trait]
+impl crate::ZbusRun for ProfileZbus {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, ZBUS_PATH, server).await;
+    }
+}
+
+#[async_trait]
+impl CtrlTask for ProfileZbus {
+    fn zbus_path() -> &'static str {
+        ZBUS_PATH
+    }
+
+    async fn create_tasks(&self, signal_ctxt: SignalContext<'static>) -> Result<(), RogError> {
+        let ctrl = self.0.clone();
+        let mut watch = self.0.lock().await.platform.monitor_platform_profile()?;
+
+        tokio::spawn(async move {
+            let mut buffer = [0; 32];
+            watch
+                .event_stream(&mut buffer)
+                .unwrap()
+                .for_each(|_| async {
+                    let mut lock = ctrl.lock().await;
+                    let new_profile = Profile::get_active_profile().unwrap();
+                    if new_profile != lock.config.active_profile {
+                        lock.config.active_profile = new_profile;
+                        lock.write_profile_curve_to_platform().unwrap();
+                        lock.save_config();
+                    }
+                    Self::notify_profile(&signal_ctxt.clone(), lock.config.active_profile)
+                        .await
+                        .ok();
+                })
+                .await;
+        });
+
+        Ok(())
+    }
+}
+
+#[async_trait]
+impl crate::Reloadable for ProfileZbus {
+    /// Fetch the active profile and use that to set all related components up
+    async fn reload(&mut self) -> Result<(), RogError> {
+        let mut ctrl = self.0.lock().await;
+        let active = ctrl.config.active_profile;
+        if let Some(curves) = &mut ctrl.config.fan_curves {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                // There is a possibility that the curve was default zeroed, so this call initialises
+                // the data from system read and we need to save it after
+                curves.write_profile_curve_to_platform(active, &mut device)?;
+                ctrl.config.write();
+            }
+        }
+        Ok(())
+    }
+}

daemon/src/ctrl_supported.rs

@@ -0,0 +1,49 @@
+use async_trait::async_trait;
+use serde_derive::{Deserialize, Serialize};
+use zbus::dbus_interface;
+use zbus::Connection;
+use zvariant::Type;
+
+use crate::{
+    ctrl_anime::CtrlAnime, ctrl_aura::controller::CtrlKbdLed, ctrl_platform::CtrlPlatform,
+    ctrl_power::CtrlPower, ctrl_profiles::controller::CtrlPlatformProfile, GetSupported,
+};
+
+use rog_platform::supported::*;
+
+#[derive(Serialize, Deserialize, Type)]
+pub struct SupportedFunctions {
+    pub anime_ctrl: AnimeSupportedFunctions,
+    pub charge_ctrl: ChargeSupportedFunctions,
+    pub platform_profile: PlatformProfileFunctions,
+    pub keyboard_led: LedSupportedFunctions,
+    pub rog_bios_ctrl: RogBiosSupportedFunctions,
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl SupportedFunctions {
+    fn supported_functions(&self) -> &SupportedFunctions {
+        self
+    }
+}
+
+#[async_trait]
+impl crate::ZbusRun for SupportedFunctions {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Supported", server).await;
+    }
+}
+
+impl GetSupported for SupportedFunctions {
+    type A = SupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        SupportedFunctions {
+            anime_ctrl: CtrlAnime::get_supported(),
+            keyboard_led: CtrlKbdLed::get_supported(),
+            charge_ctrl: CtrlPower::get_supported(),
+            platform_profile: CtrlPlatformProfile::get_supported(),
+            rog_bios_ctrl: CtrlPlatform::get_supported(),
+        }
+    }
+}

daemon/src/daemon.rs

@@ -0,0 +1,166 @@
+use std::env;
+use std::error::Error;
+use std::io::Write;
+use std::sync::Arc;
+use std::time::Duration;
+
+use ::zbus::export::futures_util::lock::Mutex;
+use ::zbus::Connection;
+use daemon::ctrl_anime::CtrlAnime;
+use log::LevelFilter;
+use log::{error, info, warn};
+use tokio::time::sleep;
+use zbus::SignalContext;
+
+use daemon::ctrl_anime::{config::AnimeConfig, trait_impls::CtrlAnimeZbus};
+use daemon::ctrl_aura::{config::AuraConfig, controller::CtrlKbdLed, trait_impls::CtrlKbdLedZbus};
+use daemon::ctrl_platform::CtrlPlatform;
+use daemon::ctrl_power::CtrlPower;
+use daemon::ctrl_profiles::{
+    config::ProfileConfig, controller::CtrlPlatformProfile, trait_impls::ProfileZbus,
+};
+use daemon::laptops::LaptopLedData;
+use daemon::{
+    config::Config, ctrl_supported::SupportedFunctions, laptops::print_board_info, GetSupported,
+};
+use daemon::{CtrlTask, Reloadable, ZbusRun};
+use rog_dbus::DBUS_NAME;
+use rog_profiles::Profile;
+
+static PROFILE_CONFIG_PATH: &str = "/etc/asusd/profile.conf";
+
+#[tokio::main]
+async fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let mut logger = env_logger::Builder::new();
+    logger
+        .target(env_logger::Target::Stdout)
+        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
+        .filter(None, LevelFilter::Info)
+        .init();
+
+    let is_service = match env::var_os("IS_SERVICE") {
+        Some(val) => val == "1",
+        None => false,
+    };
+
+    if !is_service {
+        println!("asusd schould be only run from the right systemd service");
+        println!(
+            "do not run in your terminal, if you need an logs please use journalctl -b -u asusd"
+        );
+        println!("asusd will now exit");
+        return Ok(());
+    }
+
+    info!("       daemon v{}", daemon::VERSION);
+    info!("    rog-anime v{}", rog_anime::VERSION);
+    info!("     rog-aura v{}", rog_aura::VERSION);
+    info!("     rog-dbus v{}", rog_dbus::VERSION);
+    info!(" rog-profiles v{}", rog_profiles::VERSION);
+    info!("rog-platform v{}", rog_platform::VERSION);
+
+    start_daemon().await?;
+    Ok(())
+}
+
+/// The actual main loop for the daemon
+async fn start_daemon() -> Result<(), Box<dyn Error>> {
+    let supported = SupportedFunctions::get_supported();
+    print_board_info();
+    println!("{}", serde_json::to_string_pretty(&supported)?);
+
+    // Start zbus server
+    let mut connection = Connection::system().await?;
+
+    let config = Config::load();
+    let config = Arc::new(Mutex::new(config));
+
+    supported.add_to_server(&mut connection).await;
+
+    match CtrlPlatform::new(config.clone()) {
+        Ok(ctrl) => {
+            let sig_ctx = CtrlPlatform::signal_context(&connection)?;
+            start_tasks(ctrl, &mut connection, sig_ctx).await?;
+        }
+        Err(err) => {
+            error!("CtrlPlatform: {}", err);
+        }
+    }
+
+    match CtrlPower::new(config.clone()) {
+        Ok(ctrl) => {
+            let sig_ctx = CtrlPower::signal_context(&connection)?;
+            start_tasks(ctrl, &mut connection, sig_ctx).await?;
+        }
+        Err(err) => {
+            error!("CtrlPower: {}", err);
+        }
+    }
+
+    if Profile::is_platform_profile_supported() {
+        let profile_config = ProfileConfig::load(PROFILE_CONFIG_PATH.into());
+        match CtrlPlatformProfile::new(profile_config) {
+            Ok(ctrl) => {
+                let zbus = ProfileZbus(Arc::new(Mutex::new(ctrl)));
+                let sig_ctx = ProfileZbus::signal_context(&connection)?;
+                start_tasks(zbus, &mut connection, sig_ctx).await?;
+            }
+            Err(err) => {
+                error!("Profile control: {}", err);
+            }
+        }
+    } else {
+        warn!("platform_profile support not found");
+    }
+
+    match CtrlAnime::new(AnimeConfig::load()) {
+        Ok(ctrl) => {
+            let zbus = CtrlAnimeZbus(Arc::new(Mutex::new(ctrl)));
+            let sig_ctx = CtrlAnimeZbus::signal_context(&connection)?;
+            start_tasks(zbus, &mut connection, sig_ctx).await?;
+        }
+        Err(err) => {
+            info!("AniMe control: {}", err);
+        }
+    }
+
+    let laptop = LaptopLedData::get_data();
+    let aura_config = AuraConfig::load(&laptop);
+    match CtrlKbdLed::new(laptop, aura_config) {
+        Ok(ctrl) => {
+            let zbus = CtrlKbdLedZbus(Arc::new(Mutex::new(ctrl)));
+            let sig_ctx = CtrlKbdLedZbus::signal_context(&connection)?;
+            start_tasks(zbus, &mut connection, sig_ctx).await?;
+        }
+        Err(err) => {
+            error!("Keyboard control: {}", err);
+        }
+    }
+
+    // Request dbus name after finishing initalizing all functions
+    connection.request_name(DBUS_NAME).await?;
+
+    loop {
+        // This is just a blocker to idle and ensure the reator reacts
+        sleep(Duration::from_millis(1000)).await;
+    }
+}
+
+async fn start_tasks<T>(
+    mut zbus: T,
+    connection: &mut Connection,
+    signal_ctx: SignalContext<'static>,
+) -> Result<(), Box<dyn Error>>
+where
+    T: ZbusRun + Reloadable + CtrlTask + Clone,
+{
+    let task = zbus.clone();
+
+    zbus.reload()
+        .await
+        .unwrap_or_else(|err| warn!("Controller error: {}", err));
+    zbus.add_to_server(connection).await;
+
+    task.create_tasks(signal_ctx).await.ok();
+    Ok(())
+}

daemon/src/error.rs

@@ -0,0 +1,118 @@
+use rog_anime::error::AnimeError;
+use rog_platform::error::PlatformError;
+use rog_profiles::error::ProfileError;
+use std::convert::From;
+use std::fmt;
+
+#[derive(Debug)]
+pub enum RogError {
+    ParseVendor,
+    ParseLed,
+    MissingProfile(String),
+    Udev(String, std::io::Error),
+    Path(String, std::io::Error),
+    Read(String, std::io::Error),
+    Write(String, std::io::Error),
+    NotSupported,
+    NotFound(String),
+    DoTask(String),
+    MissingFunction(String),
+    MissingLedBrightNode(String, std::io::Error),
+    ReloadFail(String),
+    Profiles(ProfileError),
+    Initramfs(String),
+    Modprobe(String),
+    Io(std::io::Error),
+    Zbus(zbus::Error),
+    ChargeLimit(u8),
+    AuraEffectNotSupported,
+    NoAuraKeyboard,
+    NoAuraNode,
+    Anime(AnimeError),
+    Platform(PlatformError),
+    SystemdUnitAction(String),
+    SystemdUnitWaitTimeout(String),
+    Command(String, std::io::Error),
+}
+
+impl fmt::Display for RogError {
+    // This trait requires `fmt` with this exact signature.
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        match self {
+            RogError::ParseVendor => write!(f, "Parse gfx vendor error"),
+            RogError::ParseLed => write!(f, "Parse LED error"),
+            RogError::MissingProfile(profile) => write!(f, "Profile does not exist {}", profile),
+            RogError::Udev(deets, error) => write!(f, "udev {}: {}", deets, error),
+            RogError::Path(path, error) => write!(f, "Path {}: {}", path, error),
+            RogError::Read(path, error) => write!(f, "Read {}: {}", path, error),
+            RogError::Write(path, error) => write!(f, "Write {}: {}", path, error),
+            RogError::NotSupported => write!(f, "Not supported"),
+            RogError::NotFound(deets) => write!(f, "Not found: {}", deets),
+            RogError::DoTask(deets) => write!(f, "Task error: {}", deets),
+            RogError::MissingFunction(deets) => write!(f, "Missing functionality: {}", deets),
+            RogError::MissingLedBrightNode(path, error) => write!(f, "Led node at {} is missing, please check you have the required patch or dkms module installed: {}", path, error),
+            RogError::ReloadFail(deets) => write!(f, "Task error: {}", deets),
+            RogError::Profiles(deets) => write!(f, "Profile error: {}", deets),
+            RogError::Initramfs(detail) => write!(f, "Initiramfs error: {}", detail),
+            RogError::Modprobe(detail) => write!(f, "Modprobe error: {}", detail),
+            RogError::Io(detail) => write!(f, "std::io error: {}", detail),
+            RogError::Zbus(detail) => write!(f, "Zbus error: {}", detail),
+            RogError::ChargeLimit(value) => write!(f, "Invalid charging limit, not in range 20-100%: {}", value),
+            RogError::AuraEffectNotSupported => write!(f, "Aura effect not supported"),
+            RogError::NoAuraKeyboard => write!(f, "No supported Aura keyboard"),
+            RogError::NoAuraNode => write!(f, "No Aura keyboard node found"),
+            RogError::Anime(deets) => write!(f, "AniMe Matrix error: {}", deets),
+            RogError::Platform(deets) => write!(f, "Asus Platform error: {}", deets),
+            RogError::SystemdUnitAction(action) => {
+                write!(f, "systemd unit action {} failed", action)
+            }
+            RogError::SystemdUnitWaitTimeout(state) => {
+                write!(
+                    f,
+                    "Timed out waiting for systemd unit change {} state",
+                    state
+                )
+            }
+            RogError::Command(func, error) => write!(f, "Command exec error: {}: {}", func, error),
+        }
+    }
+}
+
+impl std::error::Error for RogError {}
+
+impl From<ProfileError> for RogError {
+    fn from(err: ProfileError) -> Self {
+        RogError::Profiles(err)
+    }
+}
+
+impl From<AnimeError> for RogError {
+    fn from(err: AnimeError) -> Self {
+        RogError::Anime(err)
+    }
+}
+
+impl From<PlatformError> for RogError {
+    fn from(err: PlatformError) -> Self {
+        RogError::Platform(err)
+    }
+}
+
+impl From<zbus::Error> for RogError {
+    fn from(err: zbus::Error) -> Self {
+        RogError::Zbus(err)
+    }
+}
+
+impl From<std::io::Error> for RogError {
+    fn from(err: std::io::Error) -> Self {
+        RogError::Io(err)
+    }
+}
+
+impl From<RogError> for zbus::fdo::Error {
+    #[inline]
+    fn from(err: RogError) -> Self {
+        zbus::fdo::Error::Failed(format!("{}", err))
+    }
+}

daemon/src/laptops.rs

@@ -0,0 +1,167 @@
+use log::{info, warn};
+use rog_aura::{AuraModeNum, AuraZone};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::OpenOptions;
+use std::io::Read;
+
+pub const ASUS_LED_MODE_CONF: &str = "/etc/asusd/asusd-ledmodes.toml";
+pub const ASUS_LED_MODE_USER_CONF: &str = "/etc/asusd/asusd-user-ledmodes.toml";
+pub const ASUS_KEYBOARD_DEVICES: [&str; 4] = ["1866", "1869", "1854", "19b6"];
+
+pub fn print_board_info() {
+    let dmi = sysfs_class::DmiId::default();
+    let board_name = dmi.board_name().expect("Could not get board_name");
+    let prod_family = dmi.product_family().expect("Could not get product_family");
+
+    info!("Product family: {}", prod_family.trim());
+    info!("Board name: {}", board_name.trim());
+}
+
+pub fn print_modes(supported_modes: &[u8]) {
+    if !supported_modes.is_empty() {
+        info!("Supported Keyboard LED modes are:");
+        for mode in supported_modes {
+            let mode = <&str>::from(&<AuraModeNum>::from(*mode));
+            info!("- {}", mode);
+        }
+        info!(
+            "If these modes are incorrect you can edit {}",
+            ASUS_LED_MODE_CONF
+        );
+    } else {
+        info!("No RGB control available");
+    }
+}
+
+#[derive(Debug, Default, Deserialize, Serialize)]
+struct LedSupportFile {
+    led_data: Vec<LaptopLedData>,
+}
+
+#[derive(Debug, Clone, Default, Deserialize, Serialize)]
+#[serde(default)]
+pub struct LaptopLedData {
+    pub prod_family: String,
+    pub board_names: Vec<String>,
+    pub standard: Vec<AuraModeNum>,
+    pub multizone: Vec<AuraZone>,
+    pub per_key: bool,
+}
+
+impl LaptopLedData {
+    pub fn get_data() -> Self {
+        let dmi = sysfs_class::DmiId::default();
+        let board_name = dmi.board_name().expect("Could not get board_name");
+        let prod_family = dmi.product_family().expect("Could not get product_family");
+
+        if let Some(modes) = LedSupportFile::load_from_config() {
+            if let Some(data) = modes.matcher(&prod_family, &board_name) {
+                return data;
+            }
+        }
+        info!("Using generic LED control for keyboard brightness only");
+        LaptopLedData {
+            prod_family,
+            board_names: vec![board_name],
+            standard: vec![],
+            multizone: vec![],
+            per_key: false,
+        }
+    }
+}
+
+impl LedSupportFile {
+    /// Consumes the LEDModes
+    fn matcher(self, prod_family: &str, board_name: &str) -> Option<LaptopLedData> {
+        for config in self.led_data {
+            if prod_family.contains(&config.prod_family) {
+                for board in &config.board_names {
+                    if board_name.contains(board) {
+                        info!("Matched to {} {}", config.prod_family, board);
+                        return Some(config);
+                    }
+                }
+            }
+        }
+        None
+    }
+
+    fn load_from_config() -> Option<Self> {
+        let mut loaded = false;
+        let mut data = LedSupportFile::default();
+        // Load user configs first so they are first to be checked
+        if let Ok(mut file) = OpenOptions::new().read(true).open(&ASUS_LED_MODE_USER_CONF) {
+            let mut buf = String::new();
+            if let Ok(l) = file.read_to_string(&mut buf) {
+                if l == 0 {
+                    warn!("{} is empty", ASUS_LED_MODE_USER_CONF);
+                } else {
+                    if let Ok(mut tmp) = toml::from_str::<LedSupportFile>(&buf) {
+                        data.led_data.append(&mut tmp.led_data);
+                    }
+                    info!(
+                        "Loaded user-defined LED support data from {}",
+                        ASUS_LED_MODE_USER_CONF
+                    );
+                }
+            }
+        }
+        // Load and append the default LED support data
+        if let Ok(mut file) = OpenOptions::new().read(true).open(&ASUS_LED_MODE_CONF) {
+            let mut buf = String::new();
+            if let Ok(l) = file.read_to_string(&mut buf) {
+                if l == 0 {
+                    warn!("{} is empty", ASUS_LED_MODE_CONF);
+                } else {
+                    let mut tmp: LedSupportFile = toml::from_str(&buf)
+                        .unwrap_or_else(|_| panic!("Could not deserialise {}", ASUS_LED_MODE_CONF));
+                    data.led_data.append(&mut tmp.led_data);
+                    loaded = true;
+                    info!(
+                        "Loaded default LED support data from {}",
+                        ASUS_LED_MODE_CONF
+                    );
+                }
+            }
+        }
+
+        if loaded {
+            return Some(data);
+        }
+
+        warn!("Does {} exist?", ASUS_LED_MODE_USER_CONF);
+        None
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use std::{fs::OpenOptions, io::Read, path::PathBuf};
+
+    use super::LaptopLedData;
+    use rog_aura::{AuraModeNum, AuraZone};
+
+    #[test]
+    fn check_data_parse() {
+        let led = LaptopLedData {
+            prod_family: "Test".to_owned(),
+            board_names: vec!["Test".to_owned()],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![AuraZone::Key1, AuraZone::Logo, AuraZone::BarLeft],
+            per_key: false,
+        };
+
+        let toml = toml::to_string_pretty(&led).unwrap();
+        println!("{toml}");
+
+        let mut data = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
+        data.push("../data/asusd-ledmodes.toml");
+
+        let mut file = OpenOptions::new().read(true).open(&data).unwrap();
+        let mut buf = String::new();
+        file.read_to_string(&mut buf).unwrap();
+
+        let x = toml::to_string_pretty(&buf).unwrap();
+        println!("{x}");
+    }
+}

daemon/src/lib.rs

@@ -0,0 +1,192 @@
+#![deny(unused_must_use)]
+/// Configuration loading, saving
+pub mod config;
+/// Control of AniMe matrix display
+pub mod ctrl_anime;
+/// Keyboard LED brightness control, RGB, and LED display modes
+pub mod ctrl_aura;
+/// Control ASUS bios function such as boot sound, Optimus/Dedicated gfx mode
+pub mod ctrl_platform;
+/// Control of battery charge level
+pub mod ctrl_power;
+/// Control platform profiles + fan-curves if available
+pub mod ctrl_profiles;
+/// Laptop matching to determine capabilities
+pub mod laptops;
+
+pub mod systemd;
+
+/// Fetch all supported functions for the laptop
+pub mod ctrl_supported;
+
+pub mod error;
+
+use crate::error::RogError;
+use async_trait::async_trait;
+use log::warn;
+use logind_zbus::manager::ManagerProxy;
+use zbus::{export::futures_util::StreamExt, Connection, SignalContext};
+use zvariant::ObjectPath;
+
+/// This macro adds a function which spawns an `inotify` task on the passed in `Executor`.
+///
+/// The generated function is `watch_<name>()`. Self requires the following methods to be available:
+/// - `<name>() -> SomeValue`, functionally is a getter, but is allowed to have side effects.
+/// - `notify_<name>(SignalContext, SomeValue)`
+///
+/// In most cases if `SomeValue` is stored in a config then `<name>()` getter is expected to update it.
+/// The getter should *never* write back to the path or attribute that is being watched or an
+/// infinite loop will occur.
+///
+/// # Example
+///
+/// ```ignore
+/// impl CtrlRogBios {
+///     task_watch_item!(panel_od platform);
+///     task_watch_item!(gpu_mux_mode platform);
+/// }
+/// ```
+#[macro_export]
+macro_rules! task_watch_item {
+    ($name:ident $self_inner:ident) => {
+        concat_idents::concat_idents!(fn_name = watch_, $name {
+        async fn fn_name(
+            &self,
+            signal_ctxt: SignalContext<'static>,
+        ) -> Result<(), RogError> {
+            use zbus::export::futures_util::StreamExt;
+
+            let ctrl = self.clone();
+            concat_idents::concat_idents!(watch_fn = monitor_, $name {
+                match self.$self_inner.watch_fn() {
+                    Ok(mut watch) => {
+                        tokio::spawn(async move {
+                            let mut buffer = [0; 32];
+                            watch.event_stream(&mut buffer).unwrap().for_each(|_| async {
+                                let value = ctrl.$name();
+                                dbg!(&value);
+                                concat_idents::concat_idents!(notif_fn = notify_, $name {
+                                    Self::notif_fn(&signal_ctxt, value).await.ok();
+                                });
+                            }).await;
+                        });
+                    }
+                    Err(e) => info!("inotify watch failed: {}. You can ignore this if your device does not support the feature", e),
+                }
+            });
+            Ok(())
+        }
+        });
+    };
+}
+
+pub const VERSION: &str = env!("CARGO_PKG_VERSION");
+
+#[async_trait]
+pub trait Reloadable {
+    async fn reload(&mut self) -> Result<(), RogError>;
+}
+
+#[async_trait]
+pub trait ZbusRun {
+    async fn add_to_server(self, server: &mut Connection);
+
+    async fn add_to_server_helper(
+        iface: impl zbus::Interface,
+        path: &str,
+        server: &mut Connection,
+    ) {
+        server
+            .object_server()
+            .at(&ObjectPath::from_str_unchecked(path), iface)
+            .await
+            .map_err(|err| {
+                warn!("{}: add_to_server {}", path, err);
+                err
+            })
+            .ok();
+    }
+}
+
+/// Set up a task to run on the async executor
+#[async_trait]
+pub trait CtrlTask {
+    fn zbus_path() -> &'static str;
+
+    fn signal_context(connection: &Connection) -> Result<SignalContext<'static>, zbus::Error> {
+        SignalContext::new(connection, Self::zbus_path())
+    }
+
+    /// Implement to set up various tasks that may be required, using the `Executor`.
+    /// No blocking loops are allowed, or they must be run on a separate thread.
+    async fn create_tasks(&self, signal: SignalContext<'static>) -> Result<(), RogError>;
+
+    // /// Create a timed repeating task
+    // async fn repeating_task(&self, millis: u64, mut task: impl FnMut() + Send + 'static) {
+    //     use std::time::Duration;
+    //     use tokio::time;
+    //     let mut timer = time::interval(Duration::from_millis(millis));
+    //     tokio::spawn(async move {
+    //         timer.tick().await;
+    //         task();
+    //     });
+    // }
+
+    /// Free helper method to create tasks to run on: sleep, wake, shutdown, boot
+    ///
+    /// The closures can potentially block, so execution time should be the minimal possible
+    /// such as save a variable.
+    async fn create_sys_event_tasks(
+        &self,
+        mut on_sleep: impl FnMut() + Send + 'static,
+        mut on_wake: impl FnMut() + Send + 'static,
+        mut on_shutdown: impl FnMut() + Send + 'static,
+        mut on_boot: impl FnMut() + Send + 'static,
+    ) {
+        let connection = Connection::system()
+            .await
+            .expect("Controller could not create dbus connection");
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("Controller could not create ManagerProxy");
+
+        tokio::spawn(async move {
+            if let Ok(mut notif) = manager.receive_prepare_for_sleep().await {
+                while let Some(event) = notif.next().await {
+                    if let Ok(args) = event.args() {
+                        if args.start {
+                            on_sleep();
+                        } else if !args.start() {
+                            on_wake();
+                        }
+                    }
+                }
+            }
+        });
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("Controller could not create ManagerProxy");
+
+        tokio::spawn(async move {
+            if let Ok(mut notif) = manager.receive_prepare_for_shutdown().await {
+                while let Some(event) = notif.next().await {
+                    if let Ok(args) = event.args() {
+                        if args.start {
+                            on_shutdown();
+                        } else if !args.start() {
+                            on_boot();
+                        }
+                    }
+                }
+            }
+        });
+    }
+}
+
+pub trait GetSupported {
+    type A;
+
+    fn get_supported() -> Self::A;
+}

daemon/src/systemd.rs

@@ -0,0 +1,90 @@
+use std::process::Command;
+
+use crate::error::RogError;
+
+/// An action for `systemctl`
+#[derive(Debug, Copy, Clone)]
+pub enum SystemdUnitAction {
+    Stop,
+    Start,
+    Restart,
+}
+
+impl From<SystemdUnitAction> for &str {
+    fn from(s: SystemdUnitAction) -> Self {
+        match s {
+            SystemdUnitAction::Stop => "stop",
+            SystemdUnitAction::Start => "start",
+            SystemdUnitAction::Restart => "restart",
+        }
+    }
+}
+
+#[derive(Debug, Copy, Clone)]
+pub enum SystemdUnitState {
+    Active,
+    Inactive,
+}
+
+impl From<SystemdUnitState> for &str {
+    fn from(s: SystemdUnitState) -> Self {
+        match s {
+            SystemdUnitState::Active => "active",
+            SystemdUnitState::Inactive => "inactive",
+        }
+    }
+}
+
+/// Change the state of a systemd unit. Blocks while running command.
+pub fn do_systemd_unit_action(action: SystemdUnitAction, unit: &str) -> Result<(), RogError> {
+    let mut cmd = Command::new("systemctl");
+    cmd.arg(<&str>::from(action));
+    cmd.arg(unit);
+
+    let status = cmd
+        .status()
+        .map_err(|err| RogError::Command(format!("{:?}", cmd), err))?;
+    if !status.success() {
+        let msg = format!("systemctl {action:?} {unit} failed: {status:?}",);
+        return Err(RogError::SystemdUnitAction(msg));
+    }
+    Ok(())
+}
+
+/// Get systemd unit state. Blocks while command is run.
+pub fn is_systemd_unit_state(state: SystemdUnitState, unit: &str) -> Result<bool, RogError> {
+    let mut cmd = Command::new("systemctl");
+    cmd.arg("is-active");
+    cmd.arg(unit);
+
+    let output = cmd
+        .output()
+        .map_err(|err| RogError::Command(format!("{:?}", cmd), err))?;
+    if output.stdout.starts_with(<&str>::from(state).as_bytes()) {
+        return Ok(true);
+    }
+    Ok(false)
+}
+
+/// Wait for a systemd unit to change to `state`. Checks state every 250ms for 3 seconds. Blocks while running wait.
+pub fn wait_systemd_unit_state(state: SystemdUnitState, unit: &str) -> Result<(), RogError> {
+    let mut cmd = Command::new("systemctl");
+    cmd.arg("is-active");
+    cmd.arg(unit);
+
+    let mut count = 0;
+
+    while count <= (4 * 3) {
+        // 3 seconds max
+        let output = cmd
+            .output()
+            .map_err(|err| RogError::Command(format!("{:?}", cmd), err))?;
+        if output.stdout.starts_with(<&str>::from(state).as_bytes()) {
+            return Ok(());
+        }
+        // fine to block here, nobody doing shit now
+        std::thread::sleep(std::time::Duration::from_millis(250));
+        count += 1;
+    }
+    Err(RogError::SystemdUnitWaitTimeout(<&str>::from(state).into()))
+}

data/asusd-ledmodes.toml

@@ -1,39 +1,190 @@
-[[led_modes]]
+[[led_data]]
+prod_family = "TUF"
+board_names = ["FA507"]
+standard = ["Static", "Breathe", "Strobe", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "TUF Gaming"
+board_names = ["FX505D"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
 prod_family = "Zephyrus S"
 board_names = ["GX502", "GX701", "G531", "GL531", "G532"]
-led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 255]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = []
+per_key = true
 
-[[led_modes]]
-prod_family = "ROG Strix"
-board_names = ["GX531", "G512LV", "G712LV"]
-led_modes = [0, 1, 2, 3, 10, 13]
+[[led_data]]
+prod_family = "Zephyrus M"
+board_names = ["GU502G"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = []
+per_key = true
 
-[[led_modes]]
+[[led_data]]
+prod_family = "ROG Zephyrus M15"
+board_names = ["GU502LU"]
+standard = ["Static", "Breathe", "Strobe", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Zephyrus M15"
+board_names = ["GU502L"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = []
+per_key = true
+
+[[led_data]]
+prod_family = "ROG Zephyrus M16"
+board_names = ["GU603Z", "GU603H"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Zephyrus S17"
+board_names = ["GX703H"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = []
+per_key = false
+
+
+[[led_data]]
 prod_family = "Zephyrus"
-board_names = ["GM501GM", "GX531"]
-led_modes = [0, 1, 2, 3, 10, 13]
+board_names = ["GM501G", "GX531"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = ["Key1", "Key2", "Key3", "Key4"]
+per_key = false
 
-[[led_modes]]
+[[led_data]]
 prod_family = "ROG Strix"
-board_names = ["G512LI", "G712LI"]
-led_modes = [0, 1, 2, 3, 10]
+board_names = ["G531GW", "G533QR", "G533QS", "G733Q", "G513QR", "G713QR", "G513QM", "G713IC", "G713RS"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = []
+per_key = true
 
-[[led_modes]]
-prod_family = "Strix Scar 3"
-board_names = ["G531GW"]
-led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 255]
+[[led_data]]
+prod_family = "ROG Strix"
+board_names = ["G513QE", "GX531", "G512LV", "G712LV", "G712LW", "G513IH", "G513QY", "G713QM", "G512", "G713RW"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = ["Key1", "Key2", "Key3", "Key4"]
+per_key = false
 
-[[led_modes]]
+[[led_data]]
+prod_family = "ROG Strix"
+board_names = ["G512LI", "G712LI", "G531GD"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Strix"
+board_names = ["G513IM"]
+standard = ["Flash", "Static", "Breathe", "Strobe", "Rainbow"]
+multizone = []
+per_key = true
+
+[[led_data]]
 prod_family = "Strix"
 board_names = ["G731GV", "G731GW", "G531GV"]
-led_modes = [0, 1, 2, 3, 13]
+standard = ["Static", "Breathe", "Strobe", "Rainbow"]
+multizone = ["Key1", "Key2", "Key3", "Key4"]
+per_key = false
 
-[[led_modes]]
+[[led_data]]
+prod_family = "Strix"
+board_names = ["GL504G"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = ["Key1", "Key2", "Key3", "Key4", "Logo", "BarLeft", "BarRight"]
+per_key = false
+
+[[led_data]]
 prod_family = "Strix"
 board_names = ["G731GT", "G731GU", "G531GT", "G531GU"]
-led_modes = [0, 1, 2, 3]
+standard = ["Static", "Breathe", "Strobe", "Rainbow"]
+multizone = []
+per_key = false
 
-[[led_modes]]
+[[led_data]]
 prod_family = "Strix Scar"
 board_names = ["G531", "G731"]
-led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 255]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = ["Key1", "Key2", "Key3", "Key4"]
+per_key = true
+
+[[led_data]]
+prod_family = "ROG"
+board_names = ["GL553VE"]
+standard = ["Static", "Breathe", "Strobe"]
+multizone = ["Key1", "Key2", "Key3", "Key4"]
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Zephyrus G14"
+board_names = ["GA401Q"]
+standard = ["Static", "Breathe", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Zephyrus G14"
+board_names = ["GA402R"]
+standard = ["Static", "Breathe", "Pulse", "Rainbow"]
+multizone = []
+per_key = false
+
+# GA503QE at higher priority (first match) than GA503Q
+[[led_data]]
+prod_family = "ROG Zephyrus G15"
+board_names = ["GA503QE"]
+standard = ["Static", "Breathe", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Zephyrus G15"
+board_names = ["GA503Q", "GA503R"]
+standard = ["Static", "Breathe", "Pulse", "Rainbow", "Strobe"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Zephyrus"
+board_names = ["GX550L"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Star", "Rain", "Highlight", "Laser", "Ripple", "Pulse", "Comet", "Flash"]
+multizone = []
+per_key = true
+
+[[led_data]]
+prod_family = "ROG Zephyrus Duo 15 SE"
+board_names = ["GX551Q"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = []
+per_key = true
+
+[[led_data]]
+prod_family = "ROG Flow X13"
+board_names = ["GV301Q"]
+standard = ["Static", "Breathe", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Strix"
+board_names = ["G513IC", "G513RC"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = []
+per_key = false
+
+[[led_data]]
+prod_family = "ROG Flow X16"
+board_names = ["GV601R"]
+standard = ["Static", "Breathe", "Strobe", "Pulse"]
+multizone = []
+per_key = false

data/asusd-user.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=ASUS User Daemon
+StartLimitInterval=200
+StartLimitBurst=2
+
+[Service]
+ExecStartPre=/usr/bin/sleep 2
+ExecStart=/usr/bin/asusd-user
+Restart=on-failure
+RestartSec=1
+Type=simple
+
+[Install]
+WantedBy=default.target

data/asusd.conf

@@ -10,6 +10,10 @@
         <allow send_destination="org.asuslinux.Daemon"/>
         <allow receive_sender="org.asuslinux.Daemon"/>
     </policy>
+    <policy group="users">
+        <allow send_destination="org.asuslinux.Daemon"/>
+        <allow receive_sender="org.asuslinux.Daemon"/>
+    </policy>
     <policy group="wheel">
         <allow send_destination="org.asuslinux.Daemon"/>
         <allow receive_sender="org.asuslinux.Daemon"/>

data/asusd.rules

@@ -1 +1,19 @@
-ACTION=="add|change", SUBSYSTEM=="input", ENV{ID_VENDOR_ID}=="0b05", ENV{ID_MODEL_ID}=="18[0-9][0-9]", ENV{ID_TYPE}=="hid", TAG+="systemd", ENV{SYSTEMD_WANTS}="asusd.service"
+#ACTION=="add|change", SUBSYSTEM=="input", ENV{ID_VENDOR_ID}=="0b05", ENV{ID_MODEL_ID}=="1[89][a-zA-Z0-9][a-zA-Z0-9]|193b", ENV{ID_TYPE}=="hid", TAG+="systemd", ENV{SYSTEMD_WANTS}="asusd.service"
+#ACTION=="add|remove", SUBSYSTEM=="input", ENV{ID_VENDOR_ID}=="0b05", ENV{ID_MODEL_ID}=="1[89][a-zA-Z0-9][a-zA-Z0-9]|193b", RUN+="systemctl restart asusd.service"
+
+ENV{DMI_VENDOR}="$attr{[dmi/id]sys_vendor}"
+ENV{DMI_VENDOR}!="ASUSTeK COMPUTER INC.", GOTO="asusd_end"
+
+ENV{DMI_FAMILY}="$attr{[dmi/id]product_family}"
+ENV{DMI_FAMILY}=="*TUF*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*ROG*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*Zephyrus*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*Strix*", GOTO="asusd_start"
+# No match so
+GOTO="asusd_end"
+
+LABEL="asusd_start"
+ACTION=="add|change", DRIVER=="asus-nb-wmi", TAG+="systemd", ENV{SYSTEMD_WANTS}="asusd.service"
+ACTION=="add|remove", DRIVER=="asus-nb-wmi", TAG+="systemd", RUN+="systemctl restart asusd.service"
+
+LABEL="asusd_end"

data/asusd.service

@@ -1,8 +1,17 @@
 [Unit]
 Description=ASUS Notebook Control
+StartLimitInterval=200
+StartLimitBurst=2
+Before=multi-user.target
 
 [Service]
+Environment=IS_SERVICE=1
+ExecStartPre=/bin/sleep 2
 ExecStart=/usr/bin/asusd
 Restart=on-failure
+Restart=always
+RestartSec=1
 Type=dbus
-BusName=org.asuslinux.Daemon
+BusName=org.asuslinux.Daemon
+SELinuxContext=system_u:system_r:unconfined_t:s0
+#SELinuxContext=system_u:object_r:modules_object_t:s0