Add LED support for GX703HS

Closes #207

.gitignore

@@ -1,2 +1,7 @@
 /target
-vendor.tar.xz
+vendor.tar.xz
+cargo-config
+.idea
+vendor-*
+vendor_*
+.vscode-ctags

.gitlab-ci.yml

@@ -10,10 +10,11 @@ stages:
 test:
   script:
     - cargo check #+nightly check --features "clippy"
+    - cargo test
 
 build:
   only:
-    - next
+    - main
   script:
     - make && make vendor
   artifacts:

CHANGELOG.md

@@ -4,7 +4,319 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-## [Unreleased]
+## [Unreleased ]
+
+## [4.2.0] - 2022-07-16
+### Added
+- Support for GA402 Anime Matrix display (Author: I-Al-Istannen & Luke Jones)
+- Support for power-config of all LED zones. See `asusctrl led-power --help` (Author: Luke Jones, With much help from: @MNS26)
+- Full support for multizone LED <logo, keyboard, lightbar> (Author: Luke Jones, With much help from: @MNS26)
+- Add ability to load extra data from `/etc/asusd/asusd-user-ledmodes.toml` for LED support if file exits
+- Support for G513IM LED modes
+- Support for GX703HS LED modes
+### Changed
+- Dbus interface for Aura config has been changed, all power control is done with `SetLedsEnabled` and `SetLedsDisabled`
+- Data for anime-matrix now requires passing the laptop model as enum
+- Extra unit tests for anime stuff to help verify things
+
+### Added
+- Support for GA503R LED modes
+### Changed
+- Refactor LED and AniMe tasks
+- Reload keyboard brightness on resume from sleep/hiber
+
+## [4.1.1] - 2022-06-21
+### Changed
+- Fixes to anime matrix system thread cancelation
+
+## [4.1.0] - 2022-06-20
+### Changed
+- Huge refactor to use zbus 2.2 + zvariant 3.0 in system-daemon.
+- Daemons with tasks now use `smol` for async ops.
+- Fixes to fan-curve settings from CLI (Author: Armas Span)
+- Add brightness to anime zbus notification
+- Adjust how threads in AniMe matrix controller work
+- Use proper power-state packet for keyboard LED's (Author: Martin Piffault)
+### Added
+- Support for GA402R LED modes
+- Support for GU502LV LED modes
+- Support for G512 LED modes
+- Support for G513IC LED modes (Author: dada513)
+- Support for G513QM LED modes (Author: Martin Piffault)
+- Add side-LED toggle support (Author: Martin Piffault)
+- Support reloading keyboard mode on wake (from sleep/hiber)
+- Support reloading charge-level on wake (from sleep/hiber)
+- Support running AniMe animation blocks on wake/sleep and boot/shutdown events
+
+# [4.0.7] - 2021-12-19
+### Changed
+- Fix incorrect power-profile validation
+- Update asusd-ledmodes.toml to support Asus Rog Strix G15 G513QE (@LordVicky)
+- Update patch notes and links
+
+# [4.0.6] - 2021-11-01
+### Changed
+- Fix CLI for bios toggles
+### Added
+- Extra commands for AniMe: pixel-image, gif, pixel-gif
+
+# [4.0.5] - 2021-10-27
+### Changed
+- Convert fan curve percentage to 0-255 expected by kernel driver only if '%' char is used, otherwise the expected range for fan power is 0-255
+- Use correct error in daemon for invalid charging limit
+- Enforce charging limit values in range 20-100
+### Added
+- LED modes for G513QR
+
+# [4.0.4] - 2021-10-02
+### Changed
+- Add missing Profile commands
+- Spawn tasks on individual threads to prevent blocking
+- Don't force fan-curve default on reload
+- Begin obsoleting the graphics switch command in favour of supergfxctl
+- Slim down the notification daemon to pure ASUS notifications
+
+# [4.0.3] - 2021-09-16
+### Changed
+- Don't show fan-curve warning if fan-curve available
+- Add G713QR to Strix led-modes
+- Fix part of CLI fan-curve control
+
+# [4.0.2] - 2021-09-14
+### Changed
+- Backup old configs to *-old if parse fails
+- Prevent some types of crashes related to unpatched kernels
+- Add better help for graphics errors
+- Add better help for asusctl general errors
+- Implement fan-curve dbus API
+- Implement partial fan-curve control via CLI tool
+  + Set fan curve for profile + fan gpu/cpu
+
+# [4.0.1] - 2021-09-11
+### Changed
+- Fix asusd-ledmodes.toml
+
+# [4.0.0] - 2021-09-10
+### Added
+- AniMe:
+  + Support 8bit RGB, RGBA, 16bit Greyscalw, RGB, RGBA
+  + add `AsusImage` type for slanted-template pixel-perfect images
+  + `BREAKING:` plain `Image` with time period is changed and old anime configs break as a result (sorry)
+- LED:
+  + By popular request LED prev/next cycle is added
+  + Add led modes for GX551Q
+### BREAKING CHANGES
+- Graphics control:
+  + graphics control is pulled out of asusd and moved to new package; https://gitlab.com/asus-linux/supergfxctl
+- Proflies:
+  + profiles now depend on power-profile-daemon plus kernel patches for support of platform_profile
+    - if your system supports fan-curves you will also require upcoming kernel patches for this
+  + profiles are now moved to a new file
+  + fan-curves are only partially completed due to this release needing to be done sooner
+
+# [3.7.2] - 2021-08-02
+### Added
+- Enable multizone support on Strix 513IH
+- Add G513QY ledmodes
+### Changed
+- Fix missing CLI command help for some supported options
+- Fix incorrectly selecting profile by name, where the active profile was being copied to the selected profile
+- Add `asusd` version back to `asusctl -v` report
+- Fix various clippy warnings
+
+# [3.7.1] - 2021-06-11
+### Changed
+- Refine graphics mode switching:
+  + Disallow switching to compute or vfio mode unless existing mode is "Integrated"
+
+# [3.7.0] - 2021-06-06
+### Changed
+- Set PM to auto for Nvidia always
+- Extra info output for gfx dev scan
+- Extra info in log for G-Sync to help prevent user confusion around gfx switching
+- Add GA503Q led modes
+- Added ability to fade in/out gifs and images for anime. This does break anime configs. See manual for details.
+- Added task to CtrlLed to set the keyboard LED brightness on wake from suspend
+  + requires a kernel patch which will be upstreamed and in fedora rog kernel
+- Make gfx change from nvidia to vfio/compute also force-change to integrated _then_
+  to requested mode
+- Fix invalid gfx status when switching from some modes
+- Fix copy over of serde skipped config values on config reload
+
+# [3.6.1] - 2021-05-25
+### Changed
+- Bugfix: write correct fan modes for profiles
+- Bugfix: apply created profiles
+
+# [3.6.1] - 2021-05-25
+### Changed
+- Bugfix for cycling through profiles
+
+# [3.6.0] - 2021-05-24
+### Changed
+- Add GX550L led modes
+- Don't save compute/vfio modes. Option in config for this is removed.
+- Store a temporary non-serialised option in config for if compute/vfio is active
+  for informational purposes only (will not apply on boot)
+- Save state for LEDs enabled + sleep animation enabled
+- Save state for AnimMe enabled + boot animation enabled
+- Add extra config options and dbus methods
+- Add power state signals for anime and led
+- Refactor to use channels for dbus signal handler send/recv
+- Split out profiles independant parts to a rog-profiles crate
+- Cleanup dependencies
+- Fix some dbus Supported issues
+
+# [3.5.2] - 2021-05-15
+### Changed
+- Bugfix: prevent the hang on compute/integrated mode change
+
+# [3.5.1] - 2021-04-25
+### Changed
++ Anime:
+  - Fix using multiple configs
+
+# [3.5.0] - 2021-04-25
+### Changed
++ Keyboard:
+  - Split out all aura functionality that isn't dependent on the daemon in to a
+    new crate `rog-aura` (incomplete)
+  - Keyboard LED control now includes:
+    + Enable/disable LED's while laptop is awake
+    + Enable/disable LED animation while laptop is suspended and AC plugged in
+  - Properly reload the last used keyboard mode on boot
++ Graphics:
+  - Correctly enable compute mode for nvidia plus no-reboot or logout if switching
+    from vfio/integrated/compute.
+  - Add asusd config option to not save compute/vfio mode switch.
++ Anime:
+  - Enable basic multiple user anime configs (asusd-user must still be restarted)
++ Profiles:
+  - Enable dbus methods for freq min/max, fan curve, fan preset, CPU turbo enable.
+    These options will apply to the active profile if no profile name is specified.
+
+# [3.4.1] - 2021-04-11
+### Changed
+- Fix anime init sequence
+
+# [3.4.0] - 2021-04-11
+### Changed
+- Revert zbus to 1.9.1
+- Use enum to show power states, and catch missing pci path for nvidia.
+- Partial user-daemon for anime/per-key done, `asusd-user`. Includes asusd-user systemd unit.
+- user-daemon provides dbus emthods to insert anime actions, remove from index, set leds on/off
+  + Config file is stored in `~/.config/rog/rog-user.cfg`
+- AniMe display parts split out to individual crate in preparation for publishing
+  on crates.io
+
+# [3.3.0] - 2021-04-3
+### Changed
+- Add ledmodes for G733QS
+- Add ledmodes for GA401Q
+- Default to vfio disabled in configuration. Will now hard-error if enabled and
+  the kernel modules are builtin. To enable vfio switching `"gfx_vfio_enable": false,`
+  must be changed to `true` in `/etc/asusd/asusd.conf`
+
+# [3.2.4] - 2021-03-24
+### Changed
+- Ignore vfio-builtin error if switching to integrated
+
+# [3.2.3] - 2021-03-24
+### Changed
+- Better handling of session tracking
+### Added
+- List all profile data
+- Get active profile name
+- Get active profile data
+
+# [3.2.2] - 2021-03-23
+### Changed
+- Fix brightness control, again, for non-RGB keyboards
+
+# [3.2.1] - 2021-03-21
+### Changed
+- Fix brightness control
+- Large cleanup of code relating to LED controls
+
+# [3.2.0] - 2021-03-21
+### Changed
+- Refactor keyboard LED handling
+- Added --list for profiles (Thanks @aqez)
+- Added --remove for profiles (Thanks @aqez)
+- Added a graphics mode: vfio. This attaches Nvidia devices to vfio module.
+### Broken
+- Per-key LED modes, which need thinking about how to go ahead with for future
+
+# [3.1.7] - 2021-03-11
+### Changed
+- Refactor many parts of daemon
+- Switch out session monitoring to logind-zbus
+
+# [3.1.6] - 2021-03-11
+### Changed
+- Graphics switching will now wait until all users logged out before switching
+
+### Changed
+- Further tweaks to gfx switching
+- More logging on gfx switching
+- Filter bios help according to supported modes
+- Prevent gfx mode switching if in dedicated/G-Sync mode
+
+# [3.1.4] - 2021-03-10
+### Changed
+- Notify through dbus if user changes profile manually
+- Better help on CLI, show help only for supported items
+- Bugfix to gfx switcher
+
+# [3.1.3] - 2021-03-10
+### Changed
+- Hotfix: gracefully handle removing modules in use caused by display-manager not
+  fully shutdown at the time of trying to remove modules. It will now retry every
+  250ms per module
+
+# [3.1.2] - 2021-03-10
+### Changed
+- Test and create /etc/X11/xorg.conf.d/ if it doesn't exist
+- Hotfix to better report module issues
+
+# [3.1.1] - 2021-03-10
+### Changed
+- Add missing nvidia module nvidia_uvm to gfx ctrl list
+
+# [3.1.0] - 2021-03-09
+### Added
+- GU502LU led-modes
+### Changed
+- Graphics switching is now rebootless, the daemon will now restart the
+  display-manager to switch modes instead. Caveats are:
+  + There is no confirmation from the daemon, the program issuing the command
+    must confirm the request.
+  + systemd only
+- Laptops with dedicated Nvidia mode:
+  + You still must reboot for the bios to switch modes
+  + On boot if dedicated mode is active then asusd will update the required configs
+    to put display-manager in nvidia mode
+
+# [3.0.0] - 2021-02-22
+### Added
+- G531GD led modes
+
+# [3.0.0] - 2021-02-14
+### Changed
+- Write set+apply after each array in multizone
+- Remove misc bad logic
+- Use same code path as 0x1866 device to configure led support for 0x1854 device
+- Remove duplicate code
+- Set correct speeds for multizone
+- Remove dbus crate in favour of zbus. This removes the external dbus lib requirement.
+- Huge internal refactor
+- BREAKING CHANGE: Anime code refactor. DBUS method names have changed
+- Cleanup fan and cpu control + configs
+
+# [2.2.2] - 2021-01-31
+### Changed
+- Fix for dedicated gfx capable laptops in integrated mode
+- Fix for 0x1854 device
 
 # [2.2.1] - 2021-01-27
 ### Added

Cargo.toml

@@ -1,8 +1,10 @@
 [workspace]
-members = ["asus-notify", "asus-nb-ctrl", "asus-nb"]
+members = ["asusctl", "asus-notify", "daemon", "daemon-user", "rog-supported", "rog-dbus", "rog-anime", "rog-aura", "rog-profiles"]
 
 [profile.release]
-lto = true
+# thin = 57s, asusd = 9.0M
+# fat = 72s, asusd = 6.4M
+lto = "fat"
 debug = false
 opt-level = 3
 panic = "abort"

MANUAL.md

@@ -0,0 +1,359 @@
+# asusctrl manual
+
+`asusd` is a utility for Linux to control many aspects of various ASUS laptops
+but can also be used with non-asus laptops with reduced features.
+
+## Programs Available
+
+- `asusd`: The main system daemon. It is autostarted by a udev rule and systemd unit.
+- `asusd-user`: The user level daemon. Currently will run an anime sequence, with RGB keyboard sequences soon.
+- `asusctl`: The CLI for interacting with the system daemon
+- `asus-notify`: A notification daemon with a user systemd unit that can be enabled.
+
+## `asusd`
+
+`asusd` is the main system-level daemon which will control/load/save various settings in a safe way for the user, along with exposing a *safe* dbus interface for these interactions. This section covers only the daemon plus the various configuration file options.
+
+The functionality that `asusd` exposes is:
+
+- anime control
+- led keyboard control (aura)
+- charge limiting
+- bios/efivar control
+- power profile switching
+- fan curves (if supported, this is auto-detected)
+
+each of these will be detailed in sections.
+
+### AniMe control
+
+Controller for the fancy AniMe matrix display on the lid of some machines. This controller is a work in progress.
+
+#### Config options
+
+If you have an AniMe device a few system-level config options are enabled for you in `/etc/asusd/anime.conf`;
+
+1. `"system": [],`: currently unused, is intended to be a default continuous sequence in future versions
+2. `"boot": [],`: a sequence that plays on system boot (when asusd is loaded)
+3. `"wake": [],`: a sequence that plays when waking from suspend
+4. `"shutdown": [],`: a sequence that plays when shutdown begins
+5. `"brightness": <FLOAT>`: global brightness control, where `<FLOAT> is 0.0-1.0
+
+Some default examples are provided but are minimal. The full range of configuration options will be covered in another section of this manual.
+
+### Led keyboard control
+
+The LED controller (e.g, aura) enables setting many of the factory modes available if a laptop supports them. It also enables per-key RGB settings but this is a WIP and will likely be similar to how AniMe sequences can be created.
+
+#### Supported laptops
+
+Models GA401, GA502, GU502 support LED brightness change only (no RGB). However the GA401Q model can actually use three modes; static, breathe, and pulse, plus also use red to control the LED brightness intensity.
+
+All models that have any form of LED mode control need to be enabled via the config file at `/etc/asusd/asusd-ledmodes.toml`. Unfortunately ASUS doesn't provide any easy way to find all the supported modes for all laptops (not even through Armory Crate and its various files, that progrma downloads only the required settings for the laptop it runs on) so each model must be added as needed.
+
+#### Config options
+
+The defaults are located at `/etc/asusd/asusd-ledmodes.toml`, and on `asusd` start it creates `/etc/asusd/aura.conf` whcih stores the per-mode settings. If you edit the defaults file you must remove `/etc/asusd/aura.conf` and restart `asusd.service` with `systemctl restart asusd`.
+
+##### /etc/asusd/asusd-ledmodes.toml
+
+Example:
+```toml
+[[led_data]]
+prod_family = "Strix"
+board_names = ["GL504G"]
+standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
+multizone = ["Key1", "Key2", "Key3", "Key4", "Logo", "BarLeft", "BarRight"]
+per_key = false
+```
+
+1. `prod_family`: you can find this in `journalctl -b -u asusd`, or `cat /sys/class/dmi/id/product_name`. It should be copied as written. There can be multiple `led-data` groups of the same `prod_family` with differing `board_names`.
+2. `board_names`: is an array of board names in this product family. Find this in the journal as above or by `cat /sys/class/dmi/id/board_name`.
+3. `standard` are the factory preset modes, the names should corrospond to Armory Crate names
+4. `multizone`: some models have 4 to 7 zones of LED control as shown in the example. If the laptop has no zones then an empty array will suffice.
+5. `per_key`: enable per-key RGB effects. The keyboard must support this or it has no effect.
+
+##### /etc/asusd/aura.conf
+
+This file can be manually edited if desired, but the `asusctl` CLI tool, or dbus methods are the preferred method. Any manual changes to this file mean that the `asusd.service` will need to be restarted, or you need to cycle between modes to force a reload.
+
+### Charge control
+
+Almost all modern ASUS laptops have charging limit control now. This can be controlled in `/etc/asusd/asusd.conf`.
+
+```json
+"bat_charge_limit": 80,
+```
+where the number is a percentage.
+
+### Bios control
+
+Some options that you find in Armory Crate are available under this controller, so far there is:
+
+- POST sound: this is the sound you here on bios boot post
+- G-Sync: this controls if the dGPU (Nvidia) is the *only* GPU, making it the main GPU and disabling the iGPU
+
+These options are not written to the config file as they are stored in efivars. The only way to change these is to use the exposed safe dbus methods, or use the `asusctl` CLI tool.
+
+### Profiles
+
+asusctl can support setting a power profile via platform_profile drivers. This requires [power-profiles-daemon](https://gitlab.freedesktop.org/hadess/power-profiles-daemon) v0.10.0 minimum. It also requires the kernel patch for platform_profile support to be applied form [here](https://lkml.org/lkml/2021/8/18/1022) - this patch is merged to 5.15 kernel upstream.
+
+A common use of asusctl is to bind the `fn+f5` (fan) key to `asusctl profile -n` to cycle through the 3 profiles:
+1. Balanced
+2. Performance
+3. Quiet
+
+#### Fan curves
+
+Fan curve support requires a laptop that supports it (this is detected automatically) and the kernel patch from [here](https://lkml.org/lkml/2021/10/23/250) which is accepted for the 5.17 kernel release .
+
+The fan curve format can be of varying formats:
+
+- `30c:0%,40c:5%,50c:10%,60c:20%,70c:35%,80c:55%,90c:65%,100c:65%"`
+- `30:0,40:5,50:10,60:20,70:35,80:55,90:65,100:65"`
+- `30 0,40 5,50 10,60 20,70 35,80 55,90 65,100 65"`
+- `30 0 40 5 50 10 60 20 70 35 80 55 90 65 100 65"`
+
+the order must always be the same "temperature:percentage", lowest from left to rigth being highest.
+
+The config file is located at `/etc/asusd/profile.conf` and is self-descriptive. On first run it is populated with the system EC defaults.
+
+### Support controller
+
+There is one more controller; the support controller. The sole pupose of this controller is to querie all the other controllers for information about their support level for the host laptop. Returns a json string.
+
+## asusd-user
+
+`asusd-user` is a usermode daemon. The intended purpose is to provide a method for users to run there own custom per-key keyboard effects and modes, AniMe sequences, and possibly their own profiles - all without overwriting the *base* system config. As such some parts of the system daemon will migrate to the user daemon over time with the expectation that the Linux system runs both.
+
+As of now only AniMe is active in this with configuration in `~/.config/rog/`. On first run defaults are created that are intended to work as examples.
+
+The main config is `~/.config/rog/rog-user.cfg`
+
+#### Config options: AniMe
+
+`~/.config/rog/rog-user.cfg` contains a setting `"active_anime": "<FILENAME>"` where `<FILENAME>` is the name of the AniMe config to use, located in the same directory and without the file postfix, e.g, `"active_anime": "anime-doom"`
+
+An AniMe config itself is a file with contents:
+
+```json
+{
+  "name": "<FILENAME>",
+  "anime": []
+}
+```
+
+`<FILENAME>` is used as a reference internally. `"anime": []` is an array of sequences (WIP).
+
+##### "anime" array options
+
+Each object in the array can be one of:
+
+1. AsusAnimation
+2. ImageAnimation
+3. Image
+4. Pause
+
+##### AsusAnimation
+
+`AsusAnimation` is specifically for running the gif files that Armory Crate comes with. `asusctl` includes all of these in `/usr/share/asusd/anime/asus/`
+```json
+      "AsusAnimation": {
+        "file": "<FILE_PATH>",
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+```
+
+##### AsusImage
+
+Virtually the same as `AsusAnimation` but for png files, typically created in the same "slanted" style using a template (`diagonal-template.png`) as the ASUS gifs for pixel perfection.
+
+```json
+      "AsusImage": {
+        "file": "<FILE_PATH>",
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+```
+
+##### ImageAnimation
+
+`ImageAnimation` can play *any* gif of any size.
+
+```json
+      "ImageAnimation": {
+        "file": "<FILE_PATH>",
+        "scale": <FLOAT>,
+        "angle": <FLOAT>,
+        "translation": [
+          <FLOAT>,
+          <FLOAT>
+        ],
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+    },
+```
+
+##### Image
+
+`Image` currently requires 8bit greyscale png. It will be able to use most in future.
+
+```json
+    {
+      "Image": {
+        "file": "<FILE_PATH>",
+        "scale": <FLOAT>,
+        "angle": <FLOAT>,
+        "translation": [
+          <FLOAT>,
+          <FLOAT>
+        ],
+        "time": <TIME>,
+        "brightness": <FLOAT>
+      }
+    },
+```
+
+##### Pause
+
+A `Pause` is handy for after an `Image` to hold the `Image` on the AniMe for a period.
+
+```json
+    {
+      "Pause": {
+        "secs": <INT>,
+        "nanos": <INT>
+      }
+    },
+```
+
+##### Options for objects
+
+**<FILE_PATH>**
+
+Must be full path: `"/usr/share/asusd/anime/asus/gaming/Controller.gif"` or `/home/luke/Downloads/random.gif`.
+
+**<FLOAT>**
+
+A number from 0.0-1.0.
+- `brightness`: If it is brightness it is combined with the system daemon global brightness
+- `scale`: 1.0 is the original size with lower number shrinking, larger growing
+- `angle`: Rotation angle in radians
+- `translation`: Shift the image X -/+, and y -/+
+
+**<TIME>**
+
+Time is the length of time to run the gif for:
+```json
+        "time": {
+          "Time": {
+            "secs": 5,
+            "nanos": 0
+          }
+        },
+```
+A cycle is how many gif loops to run:
+```json
+        "time": {
+          "Cycles": 2
+        },
+```
+`Infinite` means that this gif will never end:
+```json
+        "time": "Infinite",
+```
+`Fade` allows an image or gif to fade in and out, and remain at max brightness to n time:
+```json
+        "time": {
+          "Fade": {
+            "fade_in": {
+              "secs": 2,
+              "nanos": 0
+            },
+            "show_for": {
+              "secs": 1,
+              "nanos": 0
+            },
+            "fade_out": {
+              "secs": 2,
+              "nanos": 0
+            }
+          }
+        },
+```
+`show_for` can be `null`, if it is `null` then the `show_for` becomes `gif_time_length - fade_in - fade_out`.
+This is period for which the gif or image will be max brightness (as set).
+
+**<INT>**
+
+A plain non-float integer.
+
+## asusctl
+
+`asusctl` is a commandline interface which intends to be the main method of interacting with `asusd`. I can be used in any place a terminal app can be used.
+
+This program will query `asusd` for the `Support` level of the laptop and show or hide options according to this support level.
+
+Most commands are self-explanatory.
+
+### CLI Usage and help
+
+Commands are given by:
+
+```
+asusctl <option> <command> <command-options>
+```
+
+Help is available through:
+
+```
+asusctl --help
+asusctl <command> --help
+```
+
+Some commands may have subcommands:
+
+```
+asusctl <command> <subcommand> --help
+```
+
+### Keybinds
+
+To switch to next/previous Aura modes you will need to bind both the aura keys (if available) to one of:
+**Next**
+```
+asusctl led-mode -n
+```
+**Previous**
+```
+asusctl led-mode -p
+```
+
+To switch Fan/Thermal profiles you need to bind the Fn+F5 key to `asusctl profile -n`.
+
+## User NOTIFICATIONS via dbus
+
+If you have a notifications handler set up, or are using KDE or Gnome then you
+can enable the user service to get basic notifications when something changes.
+
+```
+systemctl --user enable asus-notify.service
+systemctl --user start asus-notify.service
+```
+
+# License & Trademarks
+
+Mozilla Public License 2 (MPL-2.0)
+
+---
+
+ASUS and ROG Trademark is either a US registered trademark or trademark of ASUSTeK Computer Inc. in the United States and/or other countries.
+
+Reference to any ASUS products, services, processes, or other information and/or use of ASUS Trademarks does not constitute or imply endorsement, sponsorship, or recommendation thereof by ASUS.
+
+The use of ROG and ASUS trademarks within this website and associated tools and libraries is only to provide a recognisable identifier to users to enable them to associate that these tools will work with ASUS ROG laptops.
+
+---

Makefile

@@ -1,4 +1,4 @@
-VERSION := $(shell grep -Pm1 'version = "(\d.\d.\d)"' asus-nb-ctrl/Cargo.toml | cut -d'"' -f2)
+VERSION := $(shell grep -Pm1 'version = "(\d.\d.\d)"' daemon/Cargo.toml | cut -d'"' -f2)
 
 INSTALL = install
 INSTALL_PROGRAM = ${INSTALL} -D -m 0755
@@ -13,10 +13,9 @@ zshcpl = $(datarootdir)/zsh/site-functions
 
 BIN_C := asusctl
 BIN_D := asusd
+BIN_U := asusd-user
 BIN_N := asus-notify
 LEDCFG := asusd-ledmodes.toml
-X11CFG := 90-nvidia-screen-G05.conf
-PMRULES := 90-asusd-nvidia-pm.rules
 
 SRC := Cargo.toml Cargo.lock Makefile $(shell find -type f -wholename '**/src/*.rs')
 
@@ -42,34 +41,53 @@ distclean:
 install:
 	$(INSTALL_PROGRAM) "./target/release/$(BIN_C)" "$(DESTDIR)$(bindir)/$(BIN_C)"
 	$(INSTALL_PROGRAM) "./target/release/$(BIN_D)" "$(DESTDIR)$(bindir)/$(BIN_D)"
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_U)" "$(DESTDIR)$(bindir)/$(BIN_U)"
 	$(INSTALL_PROGRAM) "./target/release/$(BIN_N)" "$(DESTDIR)$(bindir)/$(BIN_N)"
-	$(INSTALL_DATA) "./data/$(PMRULES)" "$(DESTDIR)$(libdir)/udev/rules.d/$(PMRULES)"
+
 	$(INSTALL_DATA) "./data/$(BIN_D).rules" "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
 	$(INSTALL_DATA) "./data/$(LEDCFG)" "$(DESTDIR)/etc/asusd/$(LEDCFG)"
 	$(INSTALL_DATA) "./data/$(BIN_D).conf" "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
-	$(INSTALL_DATA) "./data/$(X11CFG)" "$(DESTDIR)$(datarootdir)/X11/xorg.conf.d/$(X11CFG)"
+
 	$(INSTALL_DATA) "./data/$(BIN_D).service" "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
 	$(INSTALL_DATA) "./data/$(BIN_N).service" "$(DESTDIR)$(libdir)/systemd/user/$(BIN_N).service"
+	$(INSTALL_DATA) "./data/$(BIN_U).service" "$(DESTDIR)$(libdir)/systemd/user/$(BIN_U).service"
+
 	$(INSTALL_DATA) "./data/icons/asus_notif_yellow.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_yellow.png"
 	$(INSTALL_DATA) "./data/icons/asus_notif_green.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_green.png"
 	$(INSTALL_DATA) "./data/icons/asus_notif_red.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_red.png"
+
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-compute.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-compute.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-hybrid.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-hybrid.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-integrated.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-integrated.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-nvidia.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-nvidia.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/gpu-vfio.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-vfio.svg"
+	$(INSTALL_DATA) "./data/icons/scalable/notification-reboot.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/notification-reboot.svg"
+
 	$(INSTALL_DATA) "./data/_asusctl" "$(DESTDIR)$(zshcpl)/_asusctl"
+	$(INSTALL_DATA) "./data/completions/asusctl.fish" "$(DESTDIR)$(datarootdir)/fish/vendor_completions.d/asusctl.fish"
+	cd rog-anime/data && find "./anime" -type f -exec install -Dm 755 "{}" "$(DESTDIR)$(datarootdir)/asusd/{}" \;
 
 uninstall:
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_C)"
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_D)"
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_N)"
-	rm -f "$(DESTDIR)$(libdir)/udev/rules.d/$(PMRULES)"
 	rm -f "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
 	rm -f "$(DESTDIR)/etc/asusd/$(LEDCFG)"
 	rm -f "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
-	rm -f "$(DESTDIR)$(datarootdir)/X11/xorg.conf.d/$(X11CFG)"
 	rm -f "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
 	rm -r "$(DESTDIR)$(libdir)/systemd/user/$(BIN_N).service"
 	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_yellow.png"
 	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_green.png"
 	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_red.png"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-compute.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-hybrid.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-integrated.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-nvidia.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-vfio.svg"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/notification-reboot.svg"
 	rm -f "$(DESTDIR)$(zshcpl)/_asusctl"
+	rm -f "$(DESTDIR)$(datarootdir)/fish/vendor_completions.d/asusctl.fish"
+	rm -rf "$(DESTDIR)$(datarootdir)/asusd"
 
 update:
 	cargo update
@@ -80,13 +98,13 @@ vendor:
 	echo 'directory = "vendor"' >> .cargo/config
 	mv .cargo/config ./cargo-config
 	rm -rf .cargo
-	tar pcfJ vendor_asus-nb-ctrl_$(VERSION).tar.xz vendor
+	tar pcfJ vendor_asusctl_$(VERSION).tar.xz vendor
 	rm -rf vendor
 
 build:
 ifeq ($(VENDORED),1)
 	@echo "version = $(VERSION)"
-	tar pxf vendor_asus-nb-ctrl_$(VERSION).tar.xz
+	tar pxf vendor_asusctl_$(VERSION).tar.xz
 endif
 	cargo build $(ARGS)
 

README.md

@@ -1,35 +1,33 @@
-# ASUS NB Ctrl
+# `asusctl` for ASUS ROG
+
+[![](https://www.paypalobjects.com/en_US/i/btn/btn_donate_LG.gif)](https://www.paypal.com/donate/?hosted_button_id=4V2DEPS7K6APC) - [Asus Linux Website](https://asus-linux.org/)
 
 `asusd` is a utility for Linux to control many aspects of various ASUS laptops
 but can also be used with non-asus laptops with reduced features.
 
-**NOTICE:**
+## Kernel support
 
-This app is developed and tested on fedora only. Support is not provided for Arch or Arch based distros.
+**The minimum supported kernel version is 5.15**
 
-**NOTICE:**
-The following is *not* required for 5.11 kernel versions, as this version includes
-all the required patches.
----
-This program requires the kernel patch [here](https://www.spinics.net/lists/linux-input/msg68977.html) to be applied.
-Alternatively you may use the dkms module for 'hid-asus-rog` from one of the
-repositories [here](https://download.opensuse.org/repositories/home:/luke_nukem:/asus/).
+Fan curve control on laptops with this feature require [this patch](https://lkml.org/lkml/2021/10/23/250) which has been merged for 5.17 upstream.
 
-The patch enables the following in kernel:
+## Goals
 
-- All hotkeys (FN+Key combos)
-- Control of keyboard brightness using FN+Key combos (not RGB)
-- FN+F5 (fan) to toggle fan modes
+1. To provide an interface for rootless control of some system functions most users wish to control such as fan speeds, keyboard LEDs, graphics modes.
+2. Enable third-party apps to use the above with dbus methods
+3. To make the above as easy as possible for new users
+4. Respect the users resources: be small, light, and fast
 
-You will not get RGB control in kernel (yet), and `asusd` + `asusctl` is required
-to change modes and RGB settings.
+Point 3 means that the list of supported distros is very narrow - fedora is explicitly
+supported, while Ubuntu and openSUSE are level-2 support. All other distros are *not*
+supported (while asusd might still run fine on them). For best support use fedora 32+ Workstation.
 
-Many other patches for these laptops, AMD and Intel based, are working their way
-in to the kernel.
+Point 4? asusd currently uses a tiny fraction of cpu time, and less than 1Mb of ram, the way
+a system-level daemon should.
 
 ## Discord
 
-[Discord server link](https://discord.gg/ngbdKabAnP)
+[Discord server link](https://discord.gg/4ZKGd7Un5t)
 
 ## SUPPORTED LAPTOPS
 
@@ -50,115 +48,37 @@ will probably suffer another rename once it becomes generic enough to do so.
 - [X] User notifications daemon
 - [X] Setting/modifying built-in LED modes
 - [X] Per-key LED setting
-- [X] Fancy LED modes (See examples)
+- [X] Fancy LED modes (See examples) (currently being reworked)
 - [X] Saving settings for reload
-- [X] Logging - required for journalctl
 - [X] AniMatrix display on G14 models that include it
 - [X] Set battery charge limit (with kernel supporting this)
-- [X] Fancy fan control on G14 + G15 thanks to @Yarn1
-- [X] Graphics mode switching between iGPU, dGPU, and On-Demand
+- [X] Fan curve control on G14 + G15. Requires kernel patch (should reach 5.15 kernel)
 - [X] Toggle bios setting for boot/POST sound
 - [X] Toggle bios setting for "dedicated gfx" mode on supported laptops (g-sync)
 
-# FUNCTIONS
-
-## Graphics switching
-
-A new feature has been added to enable switching graphics modes. This can be disabled
-in the config with `"manage_gfx": false,`. Additionally there is an extra setting
-for laptops capable of g-sync dedicated gfx mode to enable the graphics switching
-to switch on dedicated gfx for "nvidia" mode.
-
-The CLI option for this does not require root until it asks for it, and provides
-instructions.
-
-This switcher conflicts with other gpu switchers like optimus-manager, suse-prime
-or ubuntu-prime, system76-power, and bbswitch. If you have issues with `asusd`
-always defaulting to `integrated` mode on boot then you will need to check for
-stray configs blocking nvidia modules from loading in:
-- `/etc/modprobe.d/`
-- `/usr/lib/modprope.d/`
-
-### Power management udev rule
-
-If you have installed the Nvidia driver manually you will require the
-`data/90-asusd-nvidia-pm.rules` udev rule to be installed in `/etc/udev/rules.d/`.
-
-### fedora and openSUSE
-
-You *may* need a file `/etc/dracut.conf.d/90-nvidia-dracut-G05.conf` installed
-to stop dracut including the nvidia modules in the ramdisk. This is espeically
-true if you manually installed the nvidia drivers.
-
-```
-# filename /etc/dracut.conf.d/90-nvidia-dracut-G05.conf
-# Omit the nvidia driver from the ramdisk, to avoid needing to regenerate
-# the ramdisk on updates, and to ensure the power-management udev rules run
-# on module load
-omit_drivers+=" nvidia nvidia-drm nvidia-modeset nvidia-uvm "
-```
-
-and run `dracut -f` after creating it.
-
-## KEYBOARD BACKLIGHT MODES
-
-Models GA401, GA502, GU502 support LED brightness change only (no RGB).
-
-If you model isn't getting the correct led modes, you can edit the file
-`/etc/asusd/asusd-ledmodes.toml`, the LED Mode numbers are as follows:
-
-```
-0   STATIC
-1   BREATHING
-2   STROBE
-3   RAINBOW
-4   STAR
-5   RAIN
-6   HIGHLIGHT
-7   LASER
-8   RIPPLE
-10  PULSE
-11  COMET
-12  FLASH
-13  MULTISTATIC
-255 PER_KEY
-```
-
-use `cat /sys/class/dmi/id/product_name` to get details about your laptop.
-
-# Keybinds
-
-To switch to next/previous Aura modes you will need to bind both the aura keys (if available) to one of:
-**Next**
-```
-asusctl led-mode -n
-```
-**Previous**
-```
-asusctl led-mode -p
-```
-
-To switch Fan/Thermal profiles you need to bind the Fn+F5 key to `asusctl profile -n`.
-
 # BUILDING
 
-Requirements are rust >= 1.40 installed from rustup.io if the distro provided version is too old, and `make`.
+Requirements are rust >= 1.57 installed from rustup.io if the distro provided version is too old, and `make`.
 
-**Ubuntu*:** `apt install libdbus-1-dev libclang-dev libudev-dev`
+**Ubuntu (unsuported):**
 
-**fedora:** `dnf install clang-devel dbus-devel systemd-devel`
+    apt install libclang-dev libudev-dev
+    curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+    make
+    sudo make install
+
+**fedora:**
+
+    dnf install clang-devel systemd-devel cargo
+    make
+    sudo make install
 
 ## Installing
+- Fedora copr = https://copr.fedorainfracloud.org/coprs/lukenukem/asus-linux/
+- openSUSE = https://download.opensuse.org/repositories/home:/luke_nukem:/asus/
+- Ubuntu = not supported due to packaging woes, but you can build and install on your own.
 
-Packaging and auto-builds are available [here](https://build.opensuse.org/package/show/home:luke_nukem:asus/asus-nb-ctrl)
-
-Download repositories are available [here](https://download.opensuse.org/repositories/home:/luke_nukem:/asus/)
-
-Alternatively check the releases page for f33 RPM.
-
----
-
-Run `make` then `sudo make install` then reboot.
+=======
 
 The default init method is to use the udev rule, this ensures that the service is
 started when the device is initialised and ready.
@@ -171,116 +91,26 @@ $ systemctl daemon-reload && systemctl restart asusd
 
 You may also need to activate the service for debian install. If running Pop!_OS, I suggest disabling `system76-power` gnome-shell extension and systemd service.
 
-If you would like to run this daemon on another non-ASUS laptop you can. You'll
-have all features available except the LED and AniMe control (further controllers
-can be added on request). You will need to install the alternative service from
-`data/asusd-alt.service`.
-
 ## Uninstalling
 
 Run `sudo make uninstall` in the source repo, and remove `/etc/asusd/`.
 
-## Updating
-
-If there has been a config file format change your config will be overwritten. This will
-become less of an issue once the feature set is nailed down. Work is happening to enable
-parsing of older configs and transferring settings to new.
-
-# USAGE
-
-**NOTE! Fan mode toggling requires a newer kernel**. I'm unsure when the patches
-required for it got merged - I've tested with the 5.6.6 kernel and above only.
-To see if the fan-mode changed cat either:
-
-- `cat /sys/devices/platform/asus-nb-wmi/throttle_thermal_policy` or
-- `cat /sys/devices/platform/asus-nb-wmi/fan_boost_mode`
-
-The numbers are 0 = Normal/Balanced, 1 = Boost, 2 = Silent.
-
-Running the program as a daemon manually will require root. Standard (non-daemon)
-mode expects to be communicating with the daemon mode over dbus.
-
-Commands are given by:
-
-```
-asusctl <option> <command> <command-options>
-```
-
-Help is available through:
-
-```
-asusctl --help
-asusctl <command> --help
-```
-
-Some commands may have subcommands:
-
-```
-asusctl <command> <subcommand> --help
-```
-
-## Daemon mode
-
-If the daemon service is enabled then on boot the following will be reloaded from save:
-
-- LED brightness
-- Last used built-in mode
-- fan-boost/thermal mode
-- battery charging limit
-
-The daemon also saves the settings per mode as the keyboard does not do this
-itself - this means cycling through modes with the Aura keys will use the
-settings that were used via CLI.
-
-Daemon mode creates a config file at `/etc/asusd/asusd.conf` which you can edit a
-little of. Most parts will be byte arrays, but you can adjust things like
-`mode_performance`.
-
-## User NOTIFICATIONS via dbus
-
-If you have a notifications handler set up, or are using KDE or Gnome then you
-can enable the user service to get basic notifications when something changes.
-
-```
-systemctl --user enable asus-notify.service
-systemctl --user start asus-notify.service
-```
 # OTHER
 
-## DBUS Input
-
-See [README_DBUS.md](./README_DBUS.md).
-
-## AniMe input
-
-You will want to look at what MeuMeu has done with [https://github.com/Meumeu/ZephyrusBling/](https://github.com/Meumeu/ZephyrusBling/)
-
 ## Supporting more laptops
 
 Please file a support request.
 
-## Notes:
-
-- If charge limit or fan modes are not working, then you may require a kernel newer than 5.6.10.
-- AniMe device check is performed on start, if your device has one it will be detected.
-- GA14/GA401 and GA15/GA502/GU502, You will need kernel [patches](https://lab.retarded.farm/zappel/asus-rog-zephyrus-g14/-/tree/master/kernel_patches), these are on their way to the kernel upstream.
-- On fedora manually installed Nvidia driver requires a dracut config as follows:
-```
-# filename/etc/dracut.conf.d/90-nvidia-dracut-G05.conf
-# Omit the nvidia driver from the ramdisk, to avoid needing to regenerate
-# the ramdisk on updates, and to ensure the power-management udev rules run
-# on module load
-omit_drivers+=" nvidia nvidia-drm nvidia-modeset nvidia-uvm "
-```
-
-# License
+# License & Trademarks
 
 Mozilla Public License 2 (MPL-2.0)
 
-# Credits
+---
 
-- [flukejones](https://github.com/flukejones/), project maintainer.
-- [tuxuser](https://github.com/tuxuser/)
-- [aspann](https://github.com/aspann)
-- [meumeu](https://github.com/Meumeu)
-- Anyone missed? Please contact me
+ASUS and ROG Trademark is either a US registered trademark or trademark of ASUSTeK Computer Inc. in the United States and/or other countries.
+
+Reference to any ASUS products, services, processes, or other information and/or use of ASUS Trademarks does not constitute or imply endorsement, sponsorship, or recommendation thereof by ASUS.
+
+The use of ROG and ASUS trademarks within this website and associated tools and libraries is only to provide a recognisable identifier to users to enable them to associate that these tools will work with ASUS ROG laptops.
+
+---

README_DBUS.md

@@ -1,115 +0,0 @@
-# DBUS Guide
-
-**WARNING: In progress updates**
-
-Interface name = org.asuslinux.Daemon
-
-Paths:
-- `/org/asuslinux/Gfx`
-  + `SetVendor` (string)
-  + `NotifyVendor` (recv vendor label string)
-- `/org/asuslinux/Led`
-  + `LedMode` (AuraMode as json)
-  + `LedModes` (array[AuraMode] as json)
-  + `SetLedMode` (AuraMode -> json)
-  + `NotifyLed` (recv json data)
-- `/org/asuslinux/Anime`
-  + `SetAnime` (byte array data)
-- `/org/asuslinux/Charge`
-  + `Limit` (u8)
-  + `SetLimit` (u8)
-  + `NotifyCharge` (recv i8)
-- `/org/asuslinux/Profile`
-  + `Profile` (recv current profile data as json string)
-  + `Profiles` (recv profiles data as json string (map))
-  + `SetProfile` (event -> json)
-  + `NotifyProfile` (recv current profile name)
-
-All `Notify*` methods are signals.
-
-### SetLed
-
-This method expects a string of JSON as input. The JSON is of format such:
-
-```
-{
-  "Static": {
-    "colour": [ 255, 0, 0]
-  }
-}
-```
-
-The possible contents of a mode are:
-
-- `"colour": [u8, u8, u8],`
-- `"speed": <String>,` <Low, Med, High>
-- `"direction": <String>,` <Up, Down, Left, Right>
-
-Modes may or may not be available for a specific laptop (TODO: dbus getter for
-supported modes). Modes are:
-
-- `"Static": { "colour": <colour> },`
-- `"Pulse": { "colour": <colour> },`
-- `"Comet": { "colour": <colour> },`
-- `"Flash": { "colour": <colour> },`
-- `"Strobe": { "speed": <speed> },`
-- `"Rain": { "speed": <speed> },`
-- `"Laser": { "colour": <colour>, "speed": <speed> },`
-- `"Ripple": { "colour": <colour>, "speed": <speed> },`
-- `"Highlight": { "colour": <colour>, "speed": <speed> },`
-- `"Rainbow": { "direction": <direction>, "speed": <speed> },`
-- `"Breathe": { "colour": <colour>, "colour2": <colour>, "speed": <speed> },`
-- `"Star": { "colour": <colour>, "colour2": <colour>, "speed": <speed> },`
-- `"MultiStatic": { "colour1": <colour>, "colour2": <colour>, , "colour3": <colour>, "colour4": <colour> },`
-
-Additionally to the above there is `"RGB": [[u8; 64]; 11]` which is for per-key
-setting of LED's but this requires some refactoring to make it easily useable over
-dbus.
-
-Lastly, there is `"LedBrightness": <u8>` which accepts 0-3 for off, low, med, high.
-
-### SetFanMode
-
-Accepts an integer from the following:
-
-- `0`: Normal
-- `1`: Boost mode
-- `2`: Silent mode
-
-## dbus-send examples:
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Profile org.asuslinux.Daemon.NextProfile
-```
-
-## dbus-send examples OUTDATED
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"Static": {"colour": [ 80, 0, 40]}}'
-```
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"Star":{"colour":[0,255,255],"colour2":[0,0,0],"speed":"Med"}}'
-```
-
-**Note:** setting colour2 to `[0,0,255]` activates random star colour. Colour2 has no effect on the
-mode otherwise.
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"Star":{"colour":[0,255,255],"colour2":[0,0,255],"speed":"Med"}}'
-```
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"LedBrightness":3}'
-```
-
-```
-dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetFanMode byte:'2'
-```
-
-Monitoring dbus while sending commands via `rog-core` will give you the json structure if you are otherwise unsure, e.g: `dbus-monitor --system |grep -A2 asuslinux`.
-
-## Getting an introspection .xml
-
-```
-dbus-send --system --print-reply --dest=org.asuslinux.Daemon /org/asuslinux/Charge org.freedesktop.DBus.Introspectable.Introspect > xml/asusd-charge.xml
-```

TODO.md

@@ -1,7 +0,0 @@
-# TODO
-
-- There is lots of code duplication. This should be turned in to macros (dbus stuff etc)
-- Add a little more information to profile notifications such as freq min/max, fan curves
-- Finish splitting out controllers to own crates
-- Finish move to zbus in client when zbus has client signal watch
-- Consider a rename again because the project is getting a lot less ASUS centric

asus-nb-ctrl/src/config.rs

@@ -1,210 +0,0 @@
-use asus_nb::aura_modes::AuraModes;
-use log::{error, info, warn};
-use rog_fan_curve::Curve;
-use serde_derive::{Deserialize, Serialize};
-use std::collections::BTreeMap;
-use std::fs::{File, OpenOptions};
-use std::io::{Read, Write};
-
-use crate::VERSION;
-
-pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
-
-/// for parsing old v2.1.2 config
-#[derive(Deserialize)]
-struct ConfigV212 {
-    gfx_managed: bool,
-    active_profile: String,
-    toggle_profiles: Vec<String>,
-    // TODO: remove power_profile
-    power_profile: u8,
-    bat_charge_limit: u8,
-    kbd_led_brightness: u8,
-    kbd_backlight_mode: u8,
-    kbd_backlight_modes: Vec<AuraModes>,
-    power_profiles: BTreeMap<String, Profile>,
-}
-
-impl ConfigV212 {
-    fn into_current(self) -> Config {
-        Config {
-            gfx_managed: self.gfx_managed,
-            gfx_nv_mode_is_dedicated: true,
-            active_profile: self.active_profile,
-            toggle_profiles: self.toggle_profiles,
-            power_profile: self.power_profile,
-            bat_charge_limit: self.bat_charge_limit,
-            kbd_led_brightness: self.kbd_led_brightness,
-            kbd_backlight_mode: self.kbd_backlight_mode,
-            kbd_backlight_modes: self.kbd_backlight_modes,
-            power_profiles: self.power_profiles,
-        }
-    }
-}
-
-#[derive(Default, Deserialize, Serialize)]
-pub struct Config {
-    pub gfx_managed: bool,
-    pub gfx_nv_mode_is_dedicated: bool,
-    pub active_profile: String,
-    pub toggle_profiles: Vec<String>,
-    // TODO: remove power_profile
-    pub power_profile: u8,
-    pub bat_charge_limit: u8,
-    pub kbd_led_brightness: u8,
-    pub kbd_backlight_mode: u8,
-    pub kbd_backlight_modes: Vec<AuraModes>,
-    pub power_profiles: BTreeMap<String, Profile>,
-}
-
-impl Config {
-    /// `load` will attempt to read the config, and panic if the dir is missing
-    pub fn load(supported_led_modes: &[u8]) -> Self {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .write(true)
-            .create(true)
-            .open(&CONFIG_PATH)
-            .expect(&format!(
-                "The file {} or directory /etc/asusd/ is missing",
-                CONFIG_PATH
-            )); // okay to cause panic here
-        let mut buf = String::new();
-        if let Ok(read_len) = file.read_to_string(&mut buf) {
-            if read_len == 0 {
-                return Config::create_default(&mut file, &supported_led_modes);
-            } else {
-                if let Ok(data) = serde_json::from_str(&buf) {
-                    return data;
-                } else if let Ok(data) = serde_json::from_str::<ConfigV212>(&buf) {
-                    let config = data.into_current();
-                    config.write();
-                    info!("Updated config version to: {}", VERSION);
-                    return config;
-                }
-                warn!("Could not deserialise {}", CONFIG_PATH);
-                panic!("Please remove {} then restart asusd", CONFIG_PATH);
-            }
-        }
-        Config::create_default(&mut file, &supported_led_modes)
-    }
-
-    fn create_default(file: &mut File, supported_led_modes: &[u8]) -> Self {
-        // create a default config here
-        let mut config = Config::default();
-        config.gfx_managed = true;
-        config.gfx_nv_mode_is_dedicated = true;
-
-        config.bat_charge_limit = 100;
-        config.kbd_backlight_mode = 0;
-        config.kbd_led_brightness = 1;
-
-        for n in supported_led_modes {
-            config.kbd_backlight_modes.push(AuraModes::from(*n))
-        }
-
-        let mut profile = Profile::default();
-        profile.fan_preset = 0;
-        profile.turbo = true;
-        config.power_profiles.insert("normal".into(), profile);
-
-        let mut profile = Profile::default();
-        profile.fan_preset = 1;
-        profile.turbo = true;
-        config.power_profiles.insert("boost".into(), profile);
-
-        let mut profile = Profile::default();
-        profile.fan_preset = 2;
-        config.power_profiles.insert("silent".into(), profile);
-
-        config.toggle_profiles.push("normal".into());
-        config.toggle_profiles.push("boost".into());
-        config.toggle_profiles.push("silent".into());
-        config.active_profile = "normal".into();
-
-        // Should be okay to unwrap this as is since it is a Default
-        let json = serde_json::to_string_pretty(&config).unwrap();
-        file.write_all(json.as_bytes())
-            .unwrap_or_else(|_| panic!("Could not write {}", CONFIG_PATH));
-        config
-    }
-
-    pub fn read(&mut self) {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(&CONFIG_PATH)
-            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
-        let mut buf = String::new();
-        if let Ok(l) = file.read_to_string(&mut buf) {
-            if l == 0 {
-                warn!("File is empty {}", CONFIG_PATH);
-            } else {
-                let x: Config = serde_json::from_str(&buf)
-                    .unwrap_or_else(|_| panic!("Could not deserialise {}", CONFIG_PATH));
-                *self = x;
-            }
-        }
-    }
-
-    pub fn read_new() -> Result<Config, Box<dyn std::error::Error>> {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(&CONFIG_PATH)
-            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
-        let mut buf = String::new();
-        file.read_to_string(&mut buf)?;
-        let x: Config = serde_json::from_str(&buf)?;
-        Ok(x)
-    }
-
-    pub fn write(&self) {
-        let mut file = File::create(CONFIG_PATH).expect("Couldn't overwrite config");
-        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
-        file.write_all(json.as_bytes())
-            .unwrap_or_else(|err| error!("Could not write config: {}", err));
-    }
-
-    pub fn set_mode_data(&mut self, mode: AuraModes) {
-        let byte: u8 = (&mode).into();
-        for (index, n) in self.kbd_backlight_modes.iter().enumerate() {
-            if byte == u8::from(n) {
-                // Consume it, OMNOMNOMNOM
-                self.kbd_backlight_modes[index] = mode;
-                break;
-            }
-        }
-    }
-
-    pub fn get_led_mode_data(&self, num: u8) -> Option<&AuraModes> {
-        for mode in &self.kbd_backlight_modes {
-            if u8::from(mode) == num {
-                return Some(mode);
-            }
-        }
-        None
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub struct Profile {
-    pub min_percentage: u8,
-    pub max_percentage: u8,
-    pub turbo: bool,
-    pub fan_preset: u8,
-    pub fan_curve: Option<Curve>,
-}
-
-#[deprecated]
-pub type CPUSettings = Profile;
-
-impl Default for Profile {
-    fn default() -> Self {
-        Profile {
-            min_percentage: 0,
-            max_percentage: 100,
-            turbo: false,
-            fan_preset: 0,
-            fan_curve: None,
-        }
-    }
-}

asus-nb-ctrl/src/ctrl_anime.rs

@@ -1,266 +0,0 @@
-const INIT_STR: &str = "ASUS Tech.Inc.";
-const PACKET_SIZE: usize = 640;
-
-// Only these two packets must be 17 bytes
-const DEV_PAGE: u8 = 0x5e;
-// These bytes are in [1] position of the array
-const WRITE: u8 = 0xc0;
-const INIT: u8 = 0xc2;
-const SET: u8 = 0xc3;
-const APPLY: u8 = 0xc4;
-
-// Used to turn the panel on and off
-// The next byte can be 0x03 for "on" and 0x00 for "off"
-const ON_OFF: u8 = 0x04;
-
-use asus_nb::error::AuraError;
-use log::{error, info, warn};
-use rusb::{Device, DeviceHandle};
-use std::convert::TryInto;
-use std::error::Error;
-use std::time::Duration;
-use zbus::dbus_interface;
-
-use crate::GetSupported;
-
-use serde_derive::{Deserialize, Serialize};
-#[derive(Serialize, Deserialize)]
-pub struct AnimeSupportedFunctions(bool);
-
-impl GetSupported for CtrlAnimeDisplay {
-    type A = AnimeSupportedFunctions;
-
-    fn get_supported() -> Self::A {
-        AnimeSupportedFunctions(CtrlAnimeDisplay::get_device(0x0b05, 0x193b).is_ok())
-    }
-}
-
-#[allow(dead_code)]
-#[derive(Debug)]
-pub enum AnimatrixCommand {
-    Apply,
-    SetBoot(bool),
-    Write(Vec<u8>),
-    WriteImage(Vec<Vec<u8>>),
-    //ReloadLast,
-}
-
-pub struct CtrlAnimeDisplay {
-    handle: DeviceHandle<rusb::GlobalContext>,
-    initialised: bool,
-}
-
-//AnimatrixWrite
-pub trait Dbus {
-    fn set_anime(&mut self, input: Vec<Vec<u8>>);
-
-    fn set_on_off(&mut self, status: bool);
-
-    fn set_boot_on_off(&mut self, status: bool);
-}
-
-impl crate::ZbusAdd for CtrlAnimeDisplay {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(&"/org/asuslinux/Anime".try_into().unwrap(), self)
-            .map_err(|err| {
-                warn!("CtrlAnimeDisplay: add_to_server {}", err);
-                err
-            })
-            .ok();
-    }
-}
-
-#[dbus_interface(name = "org.asuslinux.Daemon")]
-impl Dbus for CtrlAnimeDisplay {
-    fn set_anime(&mut self, input: Vec<Vec<u8>>) {
-        self.do_command(AnimatrixCommand::WriteImage(input))
-            .map_or_else(|err| warn!("{}", err), |()| info!("Writing image to Anime"));
-    }
-
-    fn set_on_off(&mut self, status: bool) {
-        let mut flush: Vec<u8> = vec![0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = WRITE;
-        flush[2] = ON_OFF;
-
-        let status_str;
-        if status {
-            flush[3] = 0x03;
-            status_str = "on";
-        } else {
-            flush[3] = 0x00;
-            status_str = "off";
-        }
-
-        self.do_command(AnimatrixCommand::Write(flush)).map_or_else(
-            |err| warn!("{}", err),
-            |()| info!("Turning {} the AniMe", status_str),
-        );
-    }
-
-    fn set_boot_on_off(&mut self, status: bool) {
-        let status_str = if status { "on" } else { "off" };
-
-        self.do_command(AnimatrixCommand::SetBoot(status))
-            .and_then(|()| self.do_command(AnimatrixCommand::Apply))
-            .map_or_else(
-                |err| warn!("{}", err),
-                |()| info!("Turning {} the AniMe at boot/shutdown", status_str),
-            );
-    }
-}
-
-impl CtrlAnimeDisplay {
-    #[inline]
-    pub fn new() -> Result<CtrlAnimeDisplay, Box<dyn Error>> {
-        // We don't expect this ID to ever change
-        let device = CtrlAnimeDisplay::get_device(0x0b05, 0x193b)?;
-
-        let mut device = device.open()?;
-        device.reset()?;
-
-        device.set_auto_detach_kernel_driver(true).map_err(|err| {
-            error!("Auto-detach kernel driver failed: {}", err);
-            err
-        })?;
-
-        device.claim_interface(0).map_err(|err| {
-            error!("Could not claim device interface: {}", err);
-            err
-        })?;
-
-        info!("Device has an AniMe Matrix display");
-        Ok(CtrlAnimeDisplay {
-            handle: device,
-            initialised: false,
-        })
-    }
-
-    #[inline]
-    fn get_device(vendor: u16, product: u16) -> Result<Device<rusb::GlobalContext>, rusb::Error> {
-        for device in rusb::devices()?.iter() {
-            let device_desc = device.device_descriptor()?;
-            if device_desc.vendor_id() == vendor && device_desc.product_id() == product {
-                return Ok(device);
-            }
-        }
-        Err(rusb::Error::NoDevice)
-    }
-
-    pub fn do_command(&mut self, command: AnimatrixCommand) -> Result<(), AuraError> {
-        if !self.initialised {
-            self.do_initialization()?
-        }
-
-        match command {
-            AnimatrixCommand::Apply => self.do_apply()?,
-            //AnimatrixCommand::Set => self.do_set_boot()?,
-            AnimatrixCommand::SetBoot(status) => self.do_set_boot(status)?,
-            AnimatrixCommand::Write(bytes) => self.write_bytes(&bytes)?,
-            AnimatrixCommand::WriteImage(effect) => self.write_image(effect)?,
-            //AnimatrixCommand::ReloadLast => self.reload_last_builtin(&config).await?,
-        }
-        Ok(())
-    }
-
-    /// Should only be used if the bytes you are writing are verified correct
-    #[inline]
-    fn write_bytes(&self, message: &[u8]) -> Result<(), AuraError> {
-        match self.handle.write_control(
-            0x21,  // request_type
-            0x09,  // request
-            0x35e, // value
-            0x00,  // index
-            message,
-            Duration::from_millis(200),
-        ) {
-            Ok(_) => {}
-            Err(err) => match err {
-                rusb::Error::Timeout => {}
-                _ => error!("Failed to write to led interrupt: {}", err),
-            },
-        }
-        Ok(())
-    }
-
-    /// Write an Animatrix image
-    ///
-    /// The expected input here is *two* Vectors, 640 bytes in length. The two vectors
-    /// are each one half of the full image write.
-    ///
-    /// After each write a flush is written, it is assumed that this tells the device to
-    /// go ahead and display the written bytes
-    ///
-    /// # Note:
-    /// The vectors are expected to contain the full sequence of bytes as follows
-    ///
-    /// - Write pane 1: 0x5e 0xc0 0x02 0x01 0x00 0x73 0x02 .. <led brightness>
-    /// - Write pane 2: 0x5e 0xc0 0x02 0x74 0x02 0x73 0x02 .. <led brightness>
-    ///
-    /// Where led brightness is 0..255, low to high
-    #[inline]
-    fn write_image(&mut self, image: Vec<Vec<u8>>) -> Result<(), AuraError> {
-        for row in image.iter() {
-            self.write_bytes(row)?;
-        }
-        self.do_flush()?;
-        Ok(())
-    }
-
-    #[inline]
-    fn do_initialization(&mut self) -> Result<(), AuraError> {
-        let mut init = [0; PACKET_SIZE];
-        init[0] = DEV_PAGE; // This is the USB page we're using throughout
-        for (idx, byte) in INIT_STR.as_bytes().iter().enumerate() {
-            init[idx + 1] = *byte
-        }
-        self.write_bytes(&init)?;
-
-        // clear the init array and write other init message
-        for ch in init.iter_mut() {
-            *ch = 0;
-        }
-        init[0] = DEV_PAGE; // write it to be sure?
-        init[1] = INIT;
-
-        self.write_bytes(&init)?;
-        self.initialised = true;
-        Ok(())
-    }
-
-    #[inline]
-    fn do_flush(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = WRITE;
-        flush[2] = 0x03;
-
-        self.write_bytes(&flush)?;
-        Ok(())
-    }
-
-    #[inline]
-    fn do_set_boot(&mut self, status: bool) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = SET;
-        flush[2] = 0x01;
-        flush[3] = if status { 0x00 } else { 0x80 };
-
-        self.write_bytes(&flush)?;
-        Ok(())
-    }
-
-    #[inline]
-    fn do_apply(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = APPLY;
-        flush[2] = 0x01;
-        flush[3] = 0x80;
-
-        self.write_bytes(&flush)?;
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_charge.rs

@@ -1,125 +0,0 @@
-use crate::{config::Config, error::RogError, GetSupported};
-//use crate::dbus::DbusEvents;
-use log::{info, warn};
-use serde_derive::{Deserialize, Serialize};
-use std::convert::TryInto;
-use std::fs::OpenOptions;
-use std::io::Write;
-use std::path::Path;
-use std::sync::Arc;
-use std::sync::Mutex;
-use zbus::dbus_interface;
-
-static BAT_CHARGE_PATH: &str = "/sys/class/power_supply/BAT0/charge_control_end_threshold";
-
-#[derive(Serialize, Deserialize)]
-pub struct ChargeSupportedFunctions {
-    pub charge_level_set: bool,
-}
-
-impl GetSupported for CtrlCharge {
-    type A = ChargeSupportedFunctions;
-
-    fn get_supported() -> Self::A {
-        ChargeSupportedFunctions {
-            charge_level_set: CtrlCharge::get_battery_path().is_ok(),
-        }
-    }
-}
-
-pub struct CtrlCharge {
-    config: Arc<Mutex<Config>>,
-}
-
-#[dbus_interface(name = "org.asuslinux.Daemon")]
-impl CtrlCharge {
-    pub fn set_limit(&mut self, limit: u8) {
-        if let Ok(mut config) = self.config.try_lock() {
-            self.set(limit, &mut config)
-                .map_err(|err| {
-                    warn!("CtrlCharge: set_limit {}", err);
-                    err
-                })
-                .ok();
-            self.notify_charge(limit)
-                .map_err(|err| {
-                    warn!("CtrlCharge: set_limit {}", err);
-                    err
-                })
-                .ok();
-        }
-    }
-
-    pub fn limit(&self) -> i8 {
-        if let Ok(config) = self.config.try_lock() {
-            return config.bat_charge_limit as i8;
-        }
-        -1
-    }
-
-    #[dbus_interface(signal)]
-    pub fn notify_charge(&self, limit: u8) -> zbus::Result<()> {}
-}
-
-impl crate::ZbusAdd for CtrlCharge {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(&"/org/asuslinux/Charge".try_into().unwrap(), self)
-            .map_err(|err| {
-                warn!("CtrlCharge: add_to_server {}", err);
-                err
-            })
-            .ok();
-    }
-}
-
-impl crate::Reloadable for CtrlCharge {
-    fn reload(&mut self) -> Result<(), RogError> {
-        if let Ok(mut config) = self.config.try_lock() {
-            config.read();
-            self.set(config.bat_charge_limit, &mut config)?;
-        }
-        Ok(())
-    }
-}
-
-impl CtrlCharge {
-    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
-        CtrlCharge::get_battery_path()?;
-        Ok(CtrlCharge { config })
-    }
-
-    fn get_battery_path() -> Result<&'static str, RogError> {
-        if Path::new(BAT_CHARGE_PATH).exists() {
-            Ok(BAT_CHARGE_PATH)
-        } else {
-            Err(RogError::MissingFunction(
-                "Charge control not available, you may require a v5.8.10 series kernel or newer"
-                    .into(),
-            ))
-        }
-    }
-
-    pub(super) fn set(&self, limit: u8, config: &mut Config) -> Result<(), RogError> {
-        if limit < 20 || limit > 100 {
-            warn!(
-                "Unable to set battery charge limit, must be between 20-100: requested {}",
-                limit
-            );
-        }
-
-        let mut file = OpenOptions::new()
-            .write(true)
-            .open(BAT_CHARGE_PATH)
-            .map_err(|err| RogError::Path(BAT_CHARGE_PATH.into(), err))?;
-        file.write_all(limit.to_string().as_bytes())
-            .map_err(|err| RogError::Write(BAT_CHARGE_PATH.into(), err))?;
-        info!("Battery charge limit: {}", limit);
-
-        config.read();
-        config.bat_charge_limit = limit;
-        config.write();
-
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_fan_cpu.rs

@@ -1,438 +0,0 @@
-use crate::{
-    config::{Config, Profile},
-    GetSupported,
-};
-use asus_nb::profile::ProfileEvent;
-use log::{info, warn};
-use serde_derive::{Deserialize, Serialize};
-use std::convert::TryInto;
-use std::fs::OpenOptions;
-use std::io::{Read, Write};
-use std::path::Path;
-use std::str::FromStr;
-use std::sync::Arc;
-use std::sync::Mutex;
-use zbus::dbus_interface;
-
-static FAN_TYPE_1_PATH: &str = "/sys/devices/platform/asus-nb-wmi/throttle_thermal_policy";
-static FAN_TYPE_2_PATH: &str = "/sys/devices/platform/asus-nb-wmi/fan_boost_mode";
-static AMD_BOOST_PATH: &str = "/sys/devices/system/cpu/cpufreq/boost";
-
-pub struct CtrlFanAndCPU {
-    pub path: &'static str,
-    config: Arc<Mutex<Config>>,
-}
-
-#[derive(Serialize, Deserialize)]
-pub struct FanCpuSupportedFunctions {
-    pub stock_fan_modes: bool,
-    pub min_max_freq: bool,
-    pub fan_curve_set: bool,
-}
-
-impl GetSupported for CtrlFanAndCPU {
-    type A = FanCpuSupportedFunctions;
-
-    fn get_supported() -> Self::A {
-        FanCpuSupportedFunctions {
-            stock_fan_modes: CtrlFanAndCPU::get_fan_path().is_ok(),
-            min_max_freq: intel_pstate::PState::new().is_ok(),
-            fan_curve_set: rog_fan_curve::Board::from_board_name().is_some(),
-        }
-    }
-}
-
-pub struct DbusFanAndCpu {
-    inner: Arc<Mutex<CtrlFanAndCPU>>,
-}
-
-impl DbusFanAndCpu {
-    pub fn new(inner: Arc<Mutex<CtrlFanAndCPU>>) -> Self {
-        Self { inner }
-    }
-}
-
-#[dbus_interface(name = "org.asuslinux.Daemon")]
-impl DbusFanAndCpu {
-    /// Set profile details
-    fn set_profile(&self, profile: String) {
-        if let Ok(event) = serde_json::from_str(&profile) {
-            if let Ok(mut ctrl) = self.inner.try_lock() {
-                if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
-                    cfg.read();
-                    ctrl.handle_profile_event(&event, &mut cfg)
-                        .unwrap_or_else(|err| warn!("{}", err));
-                    self.notify_profile(&cfg.active_profile)
-                        .unwrap_or_else(|_| ());
-                }
-            }
-        }
-    }
-
-    /// Fetch the active profile name
-    fn next_profile(&mut self) {
-        if let Ok(mut ctrl) = self.inner.try_lock() {
-            if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
-                ctrl.do_next_profile(&mut cfg)
-                    .unwrap_or_else(|err| warn!("{}", err));
-                if let Some(profile) = cfg.power_profiles.get(&cfg.active_profile) {
-                    if let Ok(json) = serde_json::to_string(profile) {
-                        self.notify_profile(&json)
-                            .unwrap_or_else(|err| warn!("{}", err));
-                    }
-                }
-            }
-        }
-    }
-
-    /// Fetch the active profile name
-    fn active_profile_name(&mut self) -> String {
-        if let Ok(ctrl) = self.inner.try_lock() {
-            if let Ok(mut cfg) = ctrl.config.try_lock() {
-                cfg.read();
-                return cfg.active_profile.clone();
-            }
-        }
-        "Failed".to_string()
-    }
-
-    /// Fetch the active profile details
-    fn profile(&mut self) -> String {
-        if let Ok(ctrl) = self.inner.try_lock() {
-            if let Ok(mut cfg) = ctrl.config.try_lock() {
-                cfg.read();
-                if let Some(profile) = cfg.power_profiles.get(&cfg.active_profile) {
-                    if let Ok(json) = serde_json::to_string(profile) {
-                        return json;
-                    }
-                }
-            }
-        }
-        "Failed".to_string()
-    }
-
-    fn profiles(&mut self) -> String {
-        if let Ok(ctrl) = self.inner.try_lock() {
-            if let Ok(mut cfg) = ctrl.config.try_lock() {
-                cfg.read();
-                if let Ok(json) = serde_json::to_string(&cfg.power_profiles) {
-                    return json;
-                }
-            }
-        }
-        "Failed".to_string()
-    }
-
-    #[dbus_interface(signal)]
-    fn notify_profile(&self, profile: &str) -> zbus::Result<()> {}
-}
-
-impl crate::ZbusAdd for DbusFanAndCpu {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(&"/org/asuslinux/Profile".try_into().unwrap(), self)
-            .map_err(|err| {
-                warn!("DbusFanAndCpu: add_to_server {}", err);
-                err
-            })
-            .ok();
-    }
-}
-
-impl crate::Reloadable for CtrlFanAndCPU {
-    fn reload(&mut self) -> Result<(), RogError> {
-        if let Ok(mut config) = self.config.clone().try_lock() {
-            let mut file = OpenOptions::new()
-                .write(true)
-                .open(self.path)
-                .map_err(|err| RogError::Path(self.path.into(), err))?;
-            file.write_all(format!("{}\n", config.power_profile).as_bytes())
-                .map_err(|err| RogError::Write(self.path.into(), err))?;
-            let profile = config.active_profile.clone();
-            self.set(&profile, &mut config)?;
-            info!(
-                "Reloaded fan mode: {:?}",
-                FanLevel::from(config.power_profile)
-            );
-        }
-        Ok(())
-    }
-}
-
-impl crate::CtrlTask for CtrlFanAndCPU {
-    fn do_task(&mut self) -> Result<(), RogError> {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(self.path)
-            .map_err(|err| RogError::Path(self.path.into(), err))?;
-        let mut buf = [0u8; 1];
-        file.read_exact(&mut buf)
-            .map_err(|err| RogError::Read(self.path.into(), err))?;
-        if let Some(num) = char::from(buf[0]).to_digit(10) {
-            if let Ok(mut config) = self.config.clone().try_lock() {
-                if config.power_profile != num as u8 {
-                    config.read();
-
-                    let mut i = config
-                        .toggle_profiles
-                        .iter()
-                        .position(|x| x == &config.active_profile)
-                        .map(|i| i + 1)
-                        .unwrap_or(0);
-                    if i >= config.toggle_profiles.len() {
-                        i = 0;
-                    }
-
-                    let new_profile = config
-                        .toggle_profiles
-                        .get(i)
-                        .unwrap_or(&config.active_profile)
-                        .clone();
-
-                    self.set(&new_profile, &mut config)?;
-
-                    info!("Profile was changed: {}", &new_profile);
-                }
-            }
-            return Ok(());
-        }
-
-        Err(RogError::DoTask("Fan-level could not be parsed".into()))
-    }
-}
-
-impl CtrlFanAndCPU {
-    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
-        let path = CtrlFanAndCPU::get_fan_path()?;
-        info!("Device has thermal throttle control");
-        Ok(CtrlFanAndCPU { path, config })
-    }
-
-    fn get_fan_path() -> Result<&'static str, RogError> {
-        if Path::new(FAN_TYPE_1_PATH).exists() {
-            Ok(FAN_TYPE_1_PATH)
-        } else if Path::new(FAN_TYPE_2_PATH).exists() {
-            Ok(FAN_TYPE_2_PATH)
-        } else {
-            Err(RogError::MissingFunction(
-                "Fan mode not available, you may require a v5.8.10 series kernel or newer".into(),
-            ))
-        }
-    }
-
-    /// Toggle to next profile in list
-    pub(super) fn do_next_profile(&mut self, config: &mut Config) -> Result<(), RogError> {
-        config.read();
-
-        let mut i = config
-            .toggle_profiles
-            .iter()
-            .position(|x| x == &config.active_profile)
-            .map(|i| i + 1)
-            .unwrap_or(0);
-        if i >= config.toggle_profiles.len() {
-            i = 0;
-        }
-
-        let new_profile = config
-            .toggle_profiles
-            .get(i)
-            .unwrap_or(&config.active_profile)
-            .clone();
-
-        self.set(&new_profile, config)?;
-
-        info!("Profile was changed: {}", &new_profile);
-        Ok(())
-    }
-
-    pub(super) fn set_fan_mode(&mut self, preset: u8, config: &mut Config) -> Result<(), RogError> {
-        let mode = config.active_profile.clone();
-        let mut fan_ctrl = OpenOptions::new()
-            .write(true)
-            .open(self.path)
-            .map_err(|err| RogError::Path(self.path.into(), err))?;
-        config.read();
-        let mut mode_config = config
-            .power_profiles
-            .get_mut(&mode)
-            .ok_or_else(|| RogError::MissingProfile(mode.clone()))?;
-        config.power_profile = preset;
-        mode_config.fan_preset = preset;
-        config.write();
-        fan_ctrl
-            .write_all(format!("{}\n", preset).as_bytes())
-            .map_err(|err| RogError::Write(self.path.into(), err))?;
-        info!("Fan mode set to: {:?}", FanLevel::from(preset));
-        self.set_pstate_for_fan_mode(&mode, config)?;
-        self.set_fan_curve_for_fan_mode(&mode, config)?;
-        Ok(())
-    }
-
-    fn handle_profile_event(
-        &mut self,
-        event: &ProfileEvent,
-        config: &mut Config,
-    ) -> Result<(), RogError> {
-        match event {
-            ProfileEvent::Toggle => self.do_next_profile(config)?,
-            ProfileEvent::ChangeMode(mode) => {
-                self.set_fan_mode(*mode, config)?;
-            }
-            ProfileEvent::Cli(command) => {
-                let profile_key = match command.profile.as_ref() {
-                    Some(k) => k.clone(),
-                    None => config.active_profile.clone(),
-                };
-
-                let mut profile = if command.create {
-                    config
-                        .power_profiles
-                        .entry(profile_key.clone())
-                        .or_insert_with(Profile::default)
-                } else {
-                    config
-                        .power_profiles
-                        .get_mut(&profile_key)
-                        .ok_or_else(|| RogError::MissingProfile(profile_key.clone()))?
-                };
-
-                if command.turbo.is_some() {
-                    profile.turbo = command.turbo.unwrap();
-                }
-                if let Some(min_perc) = command.min_percentage {
-                    profile.min_percentage = min_perc;
-                }
-                if let Some(max_perc) = command.max_percentage {
-                    profile.max_percentage = max_perc;
-                }
-                if let Some(ref preset) = command.preset {
-                    profile.fan_preset = preset.into();
-                }
-                if let Some(ref curve) = command.curve {
-                    profile.fan_curve = Some(curve.clone());
-                }
-
-                self.set(&profile_key, config)?;
-            }
-        }
-        Ok(())
-    }
-
-    fn set(&mut self, profile: &str, config: &mut Config) -> Result<(), RogError> {
-        let mode_config = config
-            .power_profiles
-            .get(profile)
-            .ok_or_else(|| RogError::MissingProfile(profile.into()))?;
-        let mut fan_ctrl = OpenOptions::new()
-            .write(true)
-            .open(self.path)
-            .map_err(|err| RogError::Path(self.path.into(), err))?;
-        fan_ctrl
-            .write_all(format!("{}\n", mode_config.fan_preset).as_bytes())
-            .map_err(|err| RogError::Write(self.path.into(), err))?;
-        config.power_profile = mode_config.fan_preset;
-
-        self.set_pstate_for_fan_mode(profile, config)?;
-        self.set_fan_curve_for_fan_mode(profile, config)?;
-
-        config.active_profile = profile.into();
-
-        config.write();
-        Ok(())
-    }
-
-    fn set_pstate_for_fan_mode(&self, mode: &str, config: &mut Config) -> Result<(), RogError> {
-        info!("Setting pstate");
-        let mode_config = config
-            .power_profiles
-            .get(mode)
-            .ok_or_else(|| RogError::MissingProfile(mode.into()))?;
-
-        // Set CPU pstate
-        if let Ok(pstate) = intel_pstate::PState::new() {
-            pstate.set_min_perf_pct(mode_config.min_percentage)?;
-            pstate.set_max_perf_pct(mode_config.max_percentage)?;
-            pstate.set_no_turbo(!mode_config.turbo)?;
-            info!(
-                "Intel CPU Power: min: {}%, max: {}%, turbo: {}",
-                mode_config.min_percentage, mode_config.max_percentage, mode_config.turbo
-            );
-        } else {
-            info!("Setting pstate for AMD CPU");
-            // must be AMD CPU
-            let mut file = OpenOptions::new()
-                .write(true)
-                .open(AMD_BOOST_PATH)
-                .map_err(|err| RogError::Path(self.path.into(), err))?;
-
-            let boost = if mode_config.turbo { "1" } else { "0" }; // opposite of Intel
-            file.write_all(boost.as_bytes())
-                .map_err(|err| RogError::Write(AMD_BOOST_PATH.into(), err))?;
-            info!("AMD CPU Turbo: {}", boost);
-        }
-        Ok(())
-    }
-
-    fn set_fan_curve_for_fan_mode(&self, mode: &str, config: &Config) -> Result<(), RogError> {
-        let mode_config = &config
-            .power_profiles
-            .get(mode)
-            .ok_or_else(|| RogError::MissingProfile(mode.into()))?;
-
-        if let Some(ref curve) = mode_config.fan_curve {
-            use rog_fan_curve::{Board, Fan};
-            if let Some(board) = Board::from_board_name() {
-                curve.apply(board, Fan::Cpu)?;
-                curve.apply(board, Fan::Gpu)?;
-            } else {
-                warn!("Fan curve unsupported on this board.")
-            }
-        }
-
-        Ok(())
-    }
-}
-
-use crate::error::RogError;
-
-#[derive(Debug)]
-pub enum FanLevel {
-    Normal,
-    Boost,
-    Silent,
-}
-
-impl FromStr for FanLevel {
-    type Err = RogError;
-
-    fn from_str(s: &str) -> Result<Self, RogError> {
-        match s.to_lowercase().as_str() {
-            "normal" => Ok(FanLevel::Normal),
-            "boost" => Ok(FanLevel::Boost),
-            "silent" => Ok(FanLevel::Silent),
-            _ => Err(RogError::ParseFanLevel),
-        }
-    }
-}
-
-impl From<u8> for FanLevel {
-    fn from(n: u8) -> Self {
-        match n {
-            0 => FanLevel::Normal,
-            1 => FanLevel::Boost,
-            2 => FanLevel::Silent,
-            _ => FanLevel::Normal,
-        }
-    }
-}
-
-impl From<FanLevel> for u8 {
-    fn from(n: FanLevel) -> Self {
-        match n {
-            FanLevel::Normal => 0,
-            FanLevel::Boost => 1,
-            FanLevel::Silent => 2,
-        }
-    }
-}

asus-nb-ctrl/src/ctrl_gfx/error.rs

@@ -1,38 +0,0 @@
-use std::error;
-use std::fmt;
-
-use crate::error::RogError;
-
-#[derive(Debug)]
-pub enum GfxError {
-    ParseVendor,
-    Path(String, std::io::Error),
-    Read(String, std::io::Error),
-    Write(String, std::io::Error),
-    Module(String, std::io::Error),
-    Bus(String, std::io::Error),
-    Command(String, std::io::Error),
-}
-
-impl fmt::Display for GfxError {
-    // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        match self {
-            GfxError::ParseVendor => write!(f, "Could not parse vendor name"),
-            GfxError::Path(path, error) => write!(f, "Path {}: {}", path, error),
-            GfxError::Read(path, error) => write!(f, "Read {}: {}", path, error),
-            GfxError::Write(path, error) => write!(f, "Write {}: {}", path, error),
-            GfxError::Module(func, error) => write!(f, "Module error: {}: {}", func, error),
-            GfxError::Bus(func, error) => write!(f, "Bus error: {}: {}", func, error),
-            GfxError::Command(func, error) => write!(f, "Command exec error: {}: {}", func, error),
-        }
-    }
-}
-
-impl error::Error for GfxError {}
-
-impl From<GfxError> for RogError {
-    fn from(err: GfxError) -> Self {
-        RogError::GfxSwitching(err)
-    }
-}

asus-nb-ctrl/src/ctrl_gfx/gfx.rs

@@ -1,415 +0,0 @@
-use ctrl_gfx::error::GfxError;
-use ctrl_gfx::*;
-use ctrl_rog_bios::CtrlRogBios;
-use log::{error, info, warn};
-use std::io::Write;
-use std::iter::FromIterator;
-use std::path::Path;
-use std::process::Command;
-use std::str::FromStr;
-use std::{sync::Arc, sync::Mutex};
-use sysfs_class::{PciDevice, SysClass};
-use system::{GraphicsDevice, Module, PciBus};
-use vendors::{GfxCtrlAction, GfxVendors};
-use zbus::dbus_interface;
-
-use crate::*;
-
-pub struct CtrlGraphics {
-    bus: PciBus,
-    _amd: Vec<GraphicsDevice>,
-    _intel: Vec<GraphicsDevice>,
-    nvidia: Vec<GraphicsDevice>,
-    #[allow(dead_code)]
-    other: Vec<GraphicsDevice>,
-    initfs_cmd: Option<Command>,
-    config: Arc<Mutex<Config>>,
-}
-
-trait Dbus {
-    fn vendor(&self) -> String;
-    fn power(&self) -> String;
-    fn set_vendor(&mut self, vendor: String);
-    fn notify_gfx(&self, vendor: &str) -> zbus::Result<()>;
-    fn notify_action(&self, action: &str) -> zbus::Result<()>;
-}
-
-use std::convert::TryInto;
-
-#[dbus_interface(name = "org.asuslinux.Daemon")]
-impl Dbus for CtrlGraphics {
-    fn vendor(&self) -> String {
-        Self::get_vendor().unwrap_or_else(|err| format!("Get vendor failed: {}", err))
-    }
-
-    fn power(&self) -> String {
-        Self::get_runtime_status().unwrap_or_else(|err| format!("Get power status failed: {}", err))
-    }
-
-    fn set_vendor(&mut self, vendor: String) {
-        if let Ok(tmp) = GfxVendors::from_str(&vendor) {
-            let action = self.set(tmp).unwrap_or_else(|err| {
-                warn!("{}", err);
-                format!("Failed: {}", err.to_string())
-            });
-            self.notify_gfx(&vendor)
-                .unwrap_or_else(|err| warn!("{}", err));
-            self.notify_action(&action)
-                .unwrap_or_else(|err| warn!("{}", err));
-        }
-    }
-
-    #[dbus_interface(signal)]
-    fn notify_gfx(&self, vendor: &str) -> zbus::Result<()> {}
-
-    #[dbus_interface(signal)]
-    fn notify_action(&self, action: &str) -> zbus::Result<()> {}
-}
-
-impl ZbusAdd for CtrlGraphics {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(
-                &"/org/asuslinux/Gfx"
-                    .try_into()
-                    .expect("Couldn't add to zbus"),
-                self,
-            )
-            .map_err(|err| {
-                warn!("CtrlGraphics: add_to_server {}", err);
-                err
-            })
-            .ok();
-    }
-}
-
-impl Reloadable for CtrlGraphics {
-    fn reload(&mut self) -> Result<(), RogError> {
-        self.auto_power()?;
-        info!("Reloaded gfx mode: {:?}", CtrlGraphics::get_vendor()?);
-        Ok(())
-    }
-}
-
-impl CtrlGraphics {
-    pub fn new(config: Arc<Mutex<Config>>) -> std::io::Result<CtrlGraphics> {
-        let bus = PciBus::new()?;
-
-        info!("Rescanning PCI bus");
-        bus.rescan()?;
-
-        let devs = PciDevice::all()?;
-
-        let functions = |parent: &PciDevice| -> Vec<PciDevice> {
-            let mut functions = Vec::new();
-            if let Some(parent_slot) = parent.id().split('.').next() {
-                for func in devs.iter() {
-                    if let Some(func_slot) = func.id().split('.').next() {
-                        if func_slot == parent_slot {
-                            info!("{}: Function for {}", func.id(), parent.id());
-                            functions.push(func.clone());
-                        }
-                    }
-                }
-            }
-            functions
-        };
-
-        let mut amd = Vec::new();
-        let mut intel = Vec::new();
-        let mut nvidia = Vec::new();
-        let mut other = Vec::new();
-        for dev in devs.iter() {
-            let c = dev.class()?;
-            if 0x03 == (c >> 16) & 0xFF {
-                match dev.vendor()? {
-                    0x1002 => {
-                        info!("{}: AMD graphics", dev.id());
-                        amd.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
-                    }
-                    0x10DE => {
-                        info!("{}: NVIDIA graphics", dev.id());
-                        nvidia.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
-                    }
-                    0x8086 => {
-                        info!("{}: Intel graphics", dev.id());
-                        intel.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
-                    }
-                    vendor => {
-                        info!("{}: Other({:X}) graphics", dev.id(), vendor);
-                        other.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
-                    }
-                }
-            }
-        }
-
-        let mut initfs_cmd = None;
-
-        if Path::new(INITRAMFS_PATH).exists() {
-            let mut cmd = Command::new("update-initramfs");
-            cmd.arg("-u");
-            initfs_cmd = Some(cmd);
-            info!("Using initramfs update command 'update-initramfs'");
-        } else if Path::new(DRACUT_PATH).exists() {
-            let mut cmd = Command::new("dracut");
-            cmd.arg("-f");
-            initfs_cmd = Some(cmd);
-            info!("Using initramfs update command 'dracut'");
-        }
-
-        Ok(CtrlGraphics {
-            bus,
-            _amd: amd,
-            _intel: intel,
-            nvidia,
-            other,
-            initfs_cmd,
-            config,
-        })
-    }
-
-    fn get_prime_discrete() -> Result<String, RogError> {
-        let s = std::fs::read_to_string(PRIME_DISCRETE_PATH)
-            .map_err(|err| GfxError::Read(PRIME_DISCRETE_PATH.into(), err))?
-            .trim()
-            .to_owned();
-        Ok(s)
-    }
-
-    fn set_prime_discrete(mode: &str) -> Result<(), RogError> {
-        std::fs::write(PRIME_DISCRETE_PATH, mode)
-            .map_err(|err| GfxError::Read(PRIME_DISCRETE_PATH.into(), err))?;
-        Ok(())
-    }
-
-    /// Associated method to get which vendor mode is set
-    pub fn get_vendor() -> Result<String, RogError> {
-        let mode = match Self::get_prime_discrete() {
-            Ok(m) => m,
-            Err(_) => "nvidia".to_string(),
-        };
-        let modules = Module::all().map_err(|err| GfxError::Read("get_vendor".into(), err))?;
-
-        let driver_loaded = if modules
-            .iter()
-            .any(|module| module.name == "nouveau" || module.name == "nvidia")
-        {
-            true
-        } else {
-            false
-        };
-
-        let vendor = if mode == "off" {
-            if driver_loaded {
-                info!("dGPU driver loaded for compute mode");
-                "compute".to_string()
-            } else {
-                info!("No dGPU driver loaded");
-                "integrated".to_string()
-            }
-        } else {
-            info!("Assuming dGPU driver loaded");
-            if mode == "on-demand" {
-                "hybrid".to_string()
-            } else {
-                "nvidia".to_string()
-            }
-        };
-
-        Ok(vendor)
-    }
-
-    fn is_switching_prime_modes(&self, vendor: &GfxVendors) -> Result<bool, RogError> {
-        let prev_mode = GfxVendors::from_str(&Self::get_vendor()?)?;
-        if prev_mode == GfxVendors::Integrated
-            && (*vendor == GfxVendors::Hybrid || *vendor == GfxVendors::Nvidia)
-        {
-            return Ok(true);
-        }
-        if (prev_mode == GfxVendors::Hybrid || prev_mode == GfxVendors::Nvidia)
-            && *vendor == GfxVendors::Integrated
-        {
-            return Ok(true);
-        }
-        if let Ok(config) = self.config.clone().try_lock() {
-            if CtrlRogBios::has_dedicated_gfx_toggle() && config.gfx_nv_mode_is_dedicated {
-                if prev_mode == GfxVendors::Hybrid && *vendor == GfxVendors::Nvidia {
-                    return Ok(true);
-                }
-                if *vendor == GfxVendors::Hybrid && prev_mode == GfxVendors::Nvidia {
-                    return Ok(true);
-                }
-            }
-        }
-        Ok(false)
-    }
-
-    pub fn set_gfx_config(vendor: GfxVendors) -> Result<(), RogError> {
-        let mode = if vendor == GfxVendors::Hybrid {
-            "on-demand\n"
-        } else if vendor == GfxVendors::Nvidia {
-            "on\n"
-        } else {
-            // Integrated or Compute
-            "off\n"
-        };
-
-        info!("Setting {} to {}", PRIME_DISCRETE_PATH, mode);
-        Self::set_prime_discrete(mode)?;
-
-        {
-            info!("Writing {}", MODPROBE_PATH);
-
-            let mut file = std::fs::OpenOptions::new()
-                .create(true)
-                .truncate(true)
-                .write(true)
-                .open(MODPROBE_PATH)
-                .map_err(|err| GfxError::Path(MODPROBE_PATH.into(), err))?;
-
-            let text = if vendor == GfxVendors::Hybrid {
-                MODPROBE_HYBRID
-            } else if vendor == GfxVendors::Compute {
-                MODPROBE_COMPUTE
-            } else if vendor == GfxVendors::Nvidia {
-                MODPROBE_NVIDIA
-            } else {
-                MODPROBE_INTEGRATED
-            };
-
-            file.write_all(text)
-                .and_then(|_| file.sync_all())
-                .map_err(|err| GfxError::Write(MODPROBE_PATH.into(), err))?;
-        }
-
-        info!("Writing {}", PRIMARY_GPU_XORG_PATH);
-
-        // begin section for non-separated Nvidia xorg modules
-        // eg, not put in their own directory
-        let mut file = std::fs::OpenOptions::new()
-            .create(true)
-            .truncate(true)
-            .write(true)
-            .open(PRIMARY_GPU_XORG_PATH)
-            .map_err(|err| GfxError::Write(PRIMARY_GPU_XORG_PATH.into(), err))?;
-
-        let text = if vendor == GfxVendors::Nvidia {
-            [PRIMARY_GPU_BEGIN, PRIMARY_GPU_NVIDIA, PRIMARY_GPU_END].concat()
-        } else {
-            [PRIMARY_GPU_BEGIN, PRIMARY_GPU_END].concat()
-        };
-
-        file.write_all(&text)
-            .and_then(|_| file.sync_all())
-            .map_err(|err| GfxError::Write(MODPROBE_PATH.into(), err))?;
-
-        let action = if vendor == GfxVendors::Nvidia {
-            info!("Enabling nvidia-fallback.service");
-            "enable"
-        } else {
-            info!("Disabling nvidia-fallback.service");
-            "disable"
-        };
-
-        let status = Command::new("systemctl")
-            .arg(action)
-            .arg("nvidia-fallback.service")
-            .status()
-            .map_err(|err| GfxError::Command("systemctl".into(), err))?;
-
-        if !status.success() {
-            // Error is ignored in case this service is removed
-            warn!(
-                "systemctl: {} (ignore warning if service does not exist!)",
-                status
-            );
-        }
-        Ok(())
-    }
-
-    /// Write out config files if required, enable/disable relevant services, and update the ramdisk
-    fn set(&mut self, vendor: GfxVendors) -> Result<String, RogError> {
-        // Switching from hybrid to/from nvidia shouldn't require a ramdisk update
-        // or a reboot.
-        let reboot = self.is_switching_prime_modes(&vendor)?;
-
-        if CtrlRogBios::has_dedicated_gfx_toggle() {
-            if let Ok(config) = self.config.clone().try_lock() {
-                // Switch to dedicated if config says to do so
-                if config.gfx_nv_mode_is_dedicated && vendor == GfxVendors::Nvidia {
-                    CtrlRogBios::set_gfx_mode(true)
-                        .unwrap_or_else(|err| warn!("Gfx controller: {}", err));
-                } else if let Ok(ded) = CtrlRogBios::get_gfx_mode() {
-                    // otherwise if switching to non-Nvidia mode turn off dedicated mode
-                    if ded == 1 && vendor != GfxVendors::Nvidia {
-                        CtrlRogBios::set_gfx_mode(false)
-                            .unwrap_or_else(|err| warn!("Gfx controller: {}", err));
-                    }
-                }
-            }
-        }
-
-        Self::set_gfx_config(vendor.clone())?;
-
-        let mut required_action = GfxCtrlAction::None;
-        if reboot {
-            info!("Updating initramfs");
-            if let Some(cmd) = self.initfs_cmd.as_mut() {
-                // If switching to Nvidia dedicated we need these modules included
-                if Path::new(DRACUT_PATH).exists() && vendor == GfxVendors::Nvidia {
-                    cmd.arg("--add-drivers");
-                    cmd.arg("nvidia nvidia-drm nvidia-modeset nvidia-uvm");
-                    info!("System uses dracut, forcing nvidia modules to be included in init");
-                }
-
-                let status = cmd
-                    .status()
-                    .map_err(|err| GfxError::Write(format!("{:?}", cmd), err))?;
-                if !status.success() {
-                    error!("Ram disk update failed");
-                    return Ok("Ram disk update failed".into());
-                } else {
-                    info!("Successfully updated iniramfs");
-                }
-            }
-            required_action = GfxCtrlAction::Reboot;
-        } else if !reboot {
-            required_action = GfxCtrlAction::RestartX;
-        }
-
-        Ok(required_action.into())
-    }
-
-    fn get_runtime_status() -> Result<String, RogError> {
-        const PATH: &str = "/sys/bus/pci/devices/0000:01:00.0/power/runtime_status";
-        let buf = std::fs::read_to_string(PATH).map_err(|err| GfxError::Read(PATH.into(), err))?;
-        Ok(buf)
-    }
-
-    fn set_power(&self, power: bool) -> Result<(), RogError> {
-        if power {
-            info!("Enabling graphics power");
-            self.bus
-                .rescan()
-                .map_err(|err| GfxError::Bus("bus rescan error".into(), err))?;
-        } else {
-            info!("Disabling graphics power");
-
-            // Unbind NVIDIA graphics devices and their functions
-            let unbinds = self.nvidia.iter().map(|dev| dev.unbind());
-
-            // Remove NVIDIA graphics devices and their functions
-            let removes = self.nvidia.iter().map(|dev| dev.remove());
-
-            Result::from_iter(unbinds.chain(removes))
-                .map_err(|err| GfxError::Command("device unbind error".into(), err))?;
-        }
-
-        Ok(())
-    }
-
-    fn auto_power(&self) -> Result<(), RogError> {
-        let vendor = CtrlGraphics::get_vendor()?;
-        self.set_power(vendor != "integrated")
-    }
-}

asus-nb-ctrl/src/ctrl_gfx/mod.rs

@@ -1,57 +0,0 @@
-pub mod vendors;
-
-pub mod error;
-
-pub mod gfx;
-
-pub mod system;
-
-const PRIME_DISCRETE_PATH: &str = "/etc/prime-discrete";
-const MODPROBE_PATH: &str = "/etc/modprobe.d/asusd.conf";
-const INITRAMFS_PATH: &str = "/usr/sbin/update-initramfs";
-const DRACUT_PATH: &str = "/usr/bin/dracut";
-
-static MODPROBE_NVIDIA: &[u8] = MODPROBE_HYBRID;
-
-static MODPROBE_HYBRID: &[u8] = br#"# Automatically generated by asusd
-blacklist i2c_nvidia_gpu
-alias i2c_nvidia_gpu off
-options nvidia NVreg_DynamicPowerManagement=0x02
-options nvidia-drm modeset=1
-"#;
-
-static MODPROBE_COMPUTE: &[u8] = br#"# Automatically generated by asusd
-blacklist i2c_nvidia_gpu
-alias i2c_nvidia_gpu off
-options nvidia NVreg_DynamicPowerManagement=0x02
-options nvidia-drm modeset=0
-"#;
-
-static MODPROBE_INTEGRATED: &[u8] = br#"# Automatically generated by asusd
-blacklist i2c_nvidia_gpu
-blacklist nouveau
-blacklist nvidia
-blacklist nvidia-drm
-blacklist nvidia-modeset
-alias i2c_nvidia_gpu off
-alias nouveau off
-alias nvidia off
-alias nvidia-drm off
-alias nvidia-modeset off
-"#;
-
-const PRIMARY_GPU_XORG_PATH: &str = "/etc/X11/xorg.conf.d/90-nvidia-primary.conf";
-
-static PRIMARY_GPU_BEGIN: &[u8] = br#"# Automatically generated by asusd
-Section "OutputClass"
-    Identifier "nvidia"
-    MatchDriver "nvidia-drm"
-    Driver "nvidia"
-    Option "AllowEmptyInitialConfiguration"
-    Option "AllowExternalGpus""#;
-
-static PRIMARY_GPU_NVIDIA: &[u8] = br#"
-    Option "PrimaryGPU" "true""#;
-
-static PRIMARY_GPU_END: &[u8] = br#"
-EndSection"#;

asus-nb-ctrl/src/ctrl_gfx/system.rs

@@ -1,127 +0,0 @@
-use log::{error, info, warn};
-use std::fs::read_to_string;
-use std::{fs::write, io, path::PathBuf};
-use sysfs_class::{PciDevice, SysClass};
-
-pub struct Module {
-    pub name: String,
-}
-
-impl Module {
-    fn parse(line: &str) -> io::Result<Module> {
-        let mut parts = line.split(' ');
-
-        let name = parts
-            .next()
-            .ok_or_else(|| io::Error::new(io::ErrorKind::InvalidData, "module name not found"))?;
-
-        Ok(Module {
-            name: name.to_string(),
-        })
-    }
-
-    pub fn all() -> io::Result<Vec<Module>> {
-        let mut modules = Vec::new();
-
-        let data = read_to_string("/proc/modules")?;
-        for line in data.lines() {
-            let module = Module::parse(line)?;
-            modules.push(module);
-        }
-
-        Ok(modules)
-    }
-}
-
-pub struct PciBus {
-    path: PathBuf,
-}
-
-impl PciBus {
-    pub fn new() -> io::Result<PciBus> {
-        let path = PathBuf::from("/sys/bus/pci");
-        if path.is_dir() {
-            Ok(PciBus { path })
-        } else {
-            Err(io::Error::new(
-                io::ErrorKind::NotFound,
-                "pci directory not found",
-            ))
-        }
-    }
-
-    pub fn rescan(&self) -> io::Result<()> {
-        write(self.path.join("rescan"), "1")
-    }
-}
-
-pub struct GraphicsDevice {
-    id: String,
-    functions: Vec<PciDevice>,
-}
-
-impl GraphicsDevice {
-    pub fn new(id: String, functions: Vec<PciDevice>) -> GraphicsDevice {
-        GraphicsDevice { id, functions }
-    }
-
-    pub fn exists(&self) -> bool {
-        self.functions.iter().any(|func| func.path().exists())
-    }
-
-    pub fn unbind(&self) -> Result<(), std::io::Error> {
-        for func in self.functions.iter() {
-            if func.path().exists() {
-                match func.driver() {
-                    Ok(driver) => {
-                        info!("{}: Unbinding {}", driver.id(), func.id());
-                        unsafe {
-                            driver.unbind(&func).map_err(|err| {
-                                error!("gfx unbind: {}", err);
-                                err
-                            })?;
-                        }
-                    }
-                    Err(err) => match err.kind() {
-                        io::ErrorKind::NotFound => (),
-                        _ => {
-                            error!("gfx driver: {:?}, {}", func.path(), err);
-                            return Err(err);
-                        }
-                    },
-                }
-            }
-        }
-        Ok(())
-    }
-
-    pub fn remove(&self) -> Result<(), std::io::Error> {
-        for func in self.functions.iter() {
-            if func.path().exists() {
-                match func.driver() {
-                    Ok(driver) => {
-                        error!("{}: in use by {}", func.id(), driver.id());
-                    }
-                    Err(why) => match why.kind() {
-                        std::io::ErrorKind::NotFound => {
-                            info!("{}: Removing", func.id());
-                            unsafe {
-                                // ignore errors and carry on
-                                if let Err(err) = func.remove() {
-                                    error!("gfx remove: {}", err);
-                                }
-                            }
-                        }
-                        _ => {
-                            error!("Remove device failed");
-                        }
-                    },
-                }
-            } else {
-                warn!("{}: Already removed", func.id());
-            }
-        }
-        info!("Removed all gfx devices");
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_gfx/vendors.rs

@@ -1,86 +0,0 @@
-#[derive(Debug, PartialEq, Clone)]
-pub enum GfxVendors {
-    Nvidia,
-    Integrated,
-    Compute,
-    Hybrid,
-}
-
-use std::str::FromStr;
-
-use super::error::GfxError;
-
-impl FromStr for GfxVendors {
-    type Err = GfxError;
-
-    fn from_str(s: &str) -> Result<Self, GfxError> {
-        match s.to_lowercase().as_str() {
-            "nvidia" => Ok(GfxVendors::Nvidia),
-            "hybrid" => Ok(GfxVendors::Hybrid),
-            "compute" => Ok(GfxVendors::Compute),
-            "integrated" => Ok(GfxVendors::Integrated),
-            "nvidia\n" => Ok(GfxVendors::Nvidia),
-            "hybrid\n" => Ok(GfxVendors::Hybrid),
-            "compute\n" => Ok(GfxVendors::Compute),
-            "integrated\n" => Ok(GfxVendors::Integrated),
-            _ => Err(GfxError::ParseVendor),
-        }
-    }
-}
-
-impl From<&GfxVendors> for &str {
-    fn from(mode: &GfxVendors) -> Self {
-        match mode {
-            GfxVendors::Nvidia => "nvidia",
-            GfxVendors::Hybrid => "hybrid",
-            GfxVendors::Compute => "compute",
-            GfxVendors::Integrated => "integrated",
-        }
-    }
-}
-
-#[derive(Debug)]
-pub enum GfxCtrlAction {
-    Reboot,
-    RestartX,
-    None,
-}
-
-impl FromStr for GfxCtrlAction {
-    type Err = GfxError;
-
-    fn from_str(s: &str) -> Result<Self, GfxError> {
-        match s.to_lowercase().as_str() {
-            "reboot" => Ok(GfxCtrlAction::Reboot),
-            "restartx" => Ok(GfxCtrlAction::RestartX),
-            "none" => Ok(GfxCtrlAction::None),
-            _ => Err(GfxError::ParseVendor),
-        }
-    }
-}
-
-impl From<&GfxCtrlAction> for &str {
-    fn from(mode: &GfxCtrlAction) -> Self {
-        match mode {
-            GfxCtrlAction::Reboot => "reboot",
-            GfxCtrlAction::RestartX => "restartx",
-            GfxCtrlAction::None => "none",
-        }
-    }
-}
-
-impl From<&GfxCtrlAction> for String {
-    fn from(mode: &GfxCtrlAction) -> Self {
-        match mode {
-            GfxCtrlAction::Reboot => "reboot".into(),
-            GfxCtrlAction::RestartX => "restartx".into(),
-            GfxCtrlAction::None => "none".into(),
-        }
-    }
-}
-
-impl From<GfxCtrlAction> for String {
-    fn from(mode: GfxCtrlAction) -> Self {
-        (&mode).into()
-    }
-}

asus-nb-ctrl/src/ctrl_leds.rs

@@ -1,559 +0,0 @@
-// Only these two packets must be 17 bytes
-static LED_APPLY: [u8; 17] = [0x5d, 0xb4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-static LED_SET: [u8; 17] = [0x5d, 0xb5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-
-static KBD_BRIGHT_PATH: &str = "/sys/class/leds/asus::kbd_backlight/brightness";
-
-use crate::{
-    config::Config,
-    error::RogError,
-    laptops::{match_laptop, HELP_ADDRESS},
-};
-use asus_nb::{
-    aura_brightness_bytes,
-    aura_modes::{AuraModes, PER_KEY},
-    fancy::KeyColourArray,
-    LED_MSG_LEN,
-};
-use log::{error, info, warn};
-use std::fs::OpenOptions;
-use std::io::{Read, Write};
-use std::sync::Arc;
-use std::sync::Mutex;
-use std::{convert::TryInto, path::Path};
-use zbus::dbus_interface;
-
-use crate::GetSupported;
-
-use serde_derive::{Deserialize, Serialize};
-#[derive(Serialize, Deserialize)]
-pub struct LedSupportedFunctions {
-    pub brightness_set: bool,
-    pub stock_led_modes: Option<Vec<u8>>,
-    pub per_key_led_mode: bool,
-}
-
-impl GetSupported for CtrlKbdBacklight {
-    type A = LedSupportedFunctions;
-
-    fn get_supported() -> Self::A {
-        // let mode = <&str>::from(&<AuraModes>::from(*mode));
-        let mut stock_led_modes = None;
-        let mut per_key_led_mode = false;
-        if let Some(laptop) = match_laptop() {
-            let modes = laptop.supported_modes().to_vec();
-            if modes.contains(&PER_KEY) {
-                per_key_led_mode = true;
-                let modes = modes
-                    .iter()
-                    .filter(|x| **x != PER_KEY)
-                    .map(|x| *x)
-                    .collect();
-                stock_led_modes = Some(modes);
-            }
-        }
-
-        LedSupportedFunctions {
-            brightness_set: CtrlKbdBacklight::get_kbd_bright_path().is_ok(),
-            stock_led_modes,
-            per_key_led_mode,
-        }
-    }
-}
-
-pub struct CtrlKbdBacklight {
-    led_node: Option<String>,
-    #[allow(dead_code)]
-    kbd_node: Option<String>,
-    pub bright_node: String,
-    supported_modes: Vec<u8>,
-    flip_effect_write: bool,
-    config: Arc<Mutex<Config>>,
-}
-
-pub struct DbusKbdBacklight {
-    inner: Arc<Mutex<CtrlKbdBacklight>>,
-}
-
-impl DbusKbdBacklight {
-    pub fn new(inner: Arc<Mutex<CtrlKbdBacklight>>) -> Self {
-        Self { inner }
-    }
-}
-
-trait Dbus {
-    fn set_led(&mut self, data: String);
-    fn ledmode(&self) -> String;
-    fn notify_led(&self, data: &str) -> zbus::Result<()>;
-}
-
-impl crate::ZbusAdd for DbusKbdBacklight {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(&"/org/asuslinux/Led".try_into().unwrap(), self)
-            .map_err(|err| {
-                error!("DbusKbdBacklight: add_to_server {}", err);
-            })
-            .ok();
-    }
-}
-
-#[dbus_interface(name = "org.asuslinux.Daemon")]
-impl DbusKbdBacklight {
-    fn set_led_mode(&mut self, data: String) {
-        if let Ok(data) = serde_json::from_str(&data) {
-            if let Ok(mut ctrl) = self.inner.try_lock() {
-                if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
-                    match &data {
-                        AuraModes::PerKey(_) => {
-                            ctrl.do_command(data, &mut cfg)
-                                .unwrap_or_else(|err| warn!("{}", err));
-                        }
-                        _ => {
-                            if let Ok(json) = serde_json::to_string(&data) {
-                                ctrl.do_command(data, &mut cfg)
-                                    .unwrap_or_else(|err| warn!("{}", err));
-                                self.notify_led(&json).ok();
-                            }
-                        }
-                    }
-                }
-            }
-        } else {
-            warn!("SetKeyBacklight could not deserialise");
-        }
-    }
-
-    fn next_led_mode(&self) {
-        if let Ok(mut ctrl) = self.inner.try_lock() {
-            if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
-                ctrl.toggle_mode(false, &mut cfg)
-                    .unwrap_or_else(|err| warn!("{}", err));
-
-                if let Some(mode) = cfg.get_led_mode_data(cfg.kbd_backlight_mode) {
-                    if let Ok(json) = serde_json::to_string(&mode) {
-                        self.notify_led(&json)
-                            .unwrap_or_else(|err| warn!("{}", err));
-                    }
-                }
-            }
-        }
-    }
-
-    fn prev_led_mode(&self) {
-        if let Ok(mut ctrl) = self.inner.try_lock() {
-            if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
-                ctrl.toggle_mode(true, &mut cfg)
-                    .unwrap_or_else(|err| warn!("{}", err));
-
-                if let Some(mode) = cfg.get_led_mode_data(cfg.kbd_backlight_mode) {
-                    if let Ok(json) = serde_json::to_string(&mode) {
-                        self.notify_led(&json)
-                            .unwrap_or_else(|err| warn!("{}", err));
-                    }
-                }
-            }
-        }
-    }
-
-    /// Return the current mode data
-    fn led_mode(&self) -> String {
-        if let Ok(ctrl) = self.inner.try_lock() {
-            if let Ok(cfg) = ctrl.config.clone().try_lock() {
-                if let Some(mode) = cfg.get_led_mode_data(cfg.kbd_backlight_mode) {
-                    if let Ok(json) = serde_json::to_string(&mode) {
-                        return json;
-                    }
-                }
-            }
-        }
-        warn!("SetKeyBacklight could not deserialise");
-        "SetKeyBacklight could not deserialise".to_string()
-    }
-
-    /// Return a list of available modes
-    fn led_modes(&self) -> String {
-        if let Ok(ctrl) = self.inner.try_lock() {
-            if let Ok(cfg) = ctrl.config.clone().try_lock() {
-                if let Ok(json) = serde_json::to_string(&cfg.kbd_backlight_modes) {
-                    return json;
-                }
-            }
-        }
-        warn!("SetKeyBacklight could not deserialise");
-        "SetKeyBacklight could not deserialise".to_string()
-    }
-
-    /// Return the current LED brightness
-    fn led_brightness(&self) -> i8 {
-        if let Ok(ctrl) = self.inner.try_lock() {
-            if let Ok(cfg) = ctrl.config.clone().try_lock() {
-                return cfg.kbd_led_brightness as i8;
-            }
-        }
-        warn!("SetKeyBacklight could not deserialise");
-        -1
-    }
-
-    #[dbus_interface(signal)]
-    fn notify_led(&self, data: &str) -> zbus::Result<()>;
-}
-
-impl crate::Reloadable for CtrlKbdBacklight {
-    fn reload(&mut self) -> Result<(), RogError> {
-        // set current mode (if any)
-        if let Ok(mut config) = self.config.clone().try_lock() {
-            if self.supported_modes.len() > 1 {
-                if self.supported_modes.contains(&config.kbd_backlight_mode) {
-                    let mode = config
-                        .get_led_mode_data(config.kbd_backlight_mode)
-                        .ok_or(RogError::NotSupported)?
-                        .to_owned();
-                    self.write_mode(&mode)?;
-                    info!("Reloaded last used mode");
-                } else {
-                    warn!(
-                        "An unsupported mode was set: {}, reset to first mode available",
-                        <&str>::from(&<AuraModes>::from(config.kbd_backlight_mode))
-                    );
-                    for (idx, mode) in config.kbd_backlight_modes.iter_mut().enumerate() {
-                        if !self.supported_modes.contains(&mode.into()) {
-                            config.kbd_backlight_modes.remove(idx);
-                            config.write();
-                            break;
-                        }
-                    }
-                    config.kbd_backlight_mode = self.supported_modes[0];
-                    // TODO: do a recursive call with a boxed dyn future later
-                    let mode = config
-                        .get_led_mode_data(config.kbd_backlight_mode)
-                        .ok_or(RogError::NotSupported)?
-                        .to_owned();
-                    self.write_mode(&mode)?;
-                    info!("Reloaded last used mode");
-                }
-            }
-
-            // Reload brightness
-            let bright = config.kbd_led_brightness;
-            let bytes = aura_brightness_bytes(bright);
-            self.write_bytes(&bytes)?;
-            info!("Reloaded last used brightness");
-        }
-        Ok(())
-    }
-}
-
-impl crate::CtrlTask for CtrlKbdBacklight {
-    fn do_task(&mut self) -> Result<(), RogError> {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(&self.bright_node)
-            .map_err(|err| match err.kind() {
-                std::io::ErrorKind::NotFound => {
-                    RogError::MissingLedBrightNode((&self.bright_node).into(), err)
-                }
-                _ => RogError::Path((&self.bright_node).into(), err),
-            })?;
-        let mut buf = [0u8; 1];
-        file.read_exact(&mut buf)
-            .map_err(|err| RogError::Read("buffer".into(), err))?;
-        if let Some(num) = char::from(buf[0]).to_digit(10) {
-            if let Ok(mut config) = self.config.clone().try_lock() {
-                if config.kbd_led_brightness != num as u8 {
-                    config.read();
-                    config.kbd_led_brightness = num as u8;
-                    config.write();
-                }
-            }
-            return Ok(());
-        }
-        Err(RogError::ParseLED)
-    }
-}
-
-impl CtrlKbdBacklight {
-    #[inline]
-    pub fn new(
-        id_product: &str,
-        condev_iface: Option<&String>,
-        supported_modes: Vec<u8>,
-        config: Arc<Mutex<Config>>,
-    ) -> Result<Self, RogError> {
-        // TODO: return error if *all* nodes are None
-        let ctrl = CtrlKbdBacklight {
-            // Using `ok` here so we can continue without keyboard features but
-            // still get brightness control at least... maybe...
-            led_node: Some(Self::get_node_failover(
-                id_product,
-                None,
-                Self::scan_led_node,
-            )?),
-            kbd_node: Some(Self::get_node_failover(
-                id_product,
-                condev_iface,
-                Self::scan_kbd_node,
-            )?),
-            // TODO: Check for existance
-            bright_node: Self::get_kbd_bright_path()?.to_owned(),
-            supported_modes,
-            flip_effect_write: false,
-            config,
-        };
-        Ok(ctrl)
-    }
-
-    fn get_kbd_bright_path() -> Result<&'static str, RogError> {
-        if Path::new(KBD_BRIGHT_PATH).exists() {
-            Ok(KBD_BRIGHT_PATH)
-        } else {
-            Err(RogError::MissingFunction(
-                "Keyboard features missing, you may require a v5.11 series kernel or newer".into(),
-            ))
-        }
-    }
-
-    fn get_node_failover(
-        id_product: &str,
-        iface: Option<&String>,
-        fun: fn(&str, Option<&String>) -> Result<String, RogError>,
-    ) -> Result<String, RogError> {
-        // We do three tries here just to be certain that we avoid systemd unit
-        // load order issues
-        for n in 0..=2 {
-            // 0,1,2 inclusive
-            match fun(id_product, iface) {
-                Ok(o) => return Ok(o),
-                Err(e) => {
-                    if n == 2 {
-                        warn!("Looking for node: {}", e.to_string());
-                        std::thread::sleep(std::time::Duration::from_secs(1));
-                    } else {
-                        break;
-                    }
-                }
-            }
-        }
-        // Shouldn't be possible to reach this...
-        Err(RogError::NotFound(format!("{}, {:?}", id_product, iface)))
-    }
-
-    fn scan_led_node(id_product: &str, _: Option<&String>) -> Result<String, RogError> {
-        let mut enumerator = udev::Enumerator::new().map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("enumerator failed".into(), err)
-        })?;
-        enumerator.match_subsystem("hidraw").map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("match_subsystem failed".into(), err)
-        })?;
-
-        for device in enumerator.scan_devices().map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("scan_devices failed".into(), err)
-        })? {
-            if let Some(parent) = device
-                .parent_with_subsystem_devtype("usb", "usb_device")
-                .map_err(|err| {
-                    warn!("{}", err);
-                    RogError::Udev("parent_with_subsystem_devtype failed".into(), err)
-                })?
-            {
-                if parent
-                    .attribute_value("idProduct")
-                    .ok_or(RogError::NotFound("LED idProduct".into()))?
-                    == id_product
-                {
-                    if let Some(dev_node) = device.devnode() {
-                        info!("Using device at: {:?} for LED control", dev_node);
-                        return Ok(dev_node.to_string_lossy().to_string());
-                    }
-                }
-            }
-        }
-        warn!("Did not find a hidraw node for LED control, your device may be unsupported or require a kernel patch, see: {}", HELP_ADDRESS);
-        Err(RogError::MissingFunction(
-            "ASUS LED device node not found".into(),
-        ))
-    }
-
-    fn scan_kbd_node(id_product: &str, iface: Option<&String>) -> Result<String, RogError> {
-        let mut enumerator = udev::Enumerator::new().map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("enumerator failed".into(), err)
-        })?;
-        enumerator.match_subsystem("input").map_err(|err| {
-            warn!("{}", err);
-            RogError::Udev("match_subsystem failed".into(), err)
-        })?;
-        enumerator
-            .match_property("ID_MODEL_ID", id_product)
-            .map_err(|err| {
-                warn!("{}", err);
-                RogError::Udev("match_property failed".into(), err)
-            })?;
-
-        for device in enumerator
-            .scan_devices()
-            .map_err(|err| {
-                warn!("{}", err);
-                err
-            })
-            .map_err(|err| {
-                warn!("{}", err);
-                RogError::Udev("scan_devices failed".into(), err)
-            })?
-        {
-            if let Some(dev_node) = device.devnode() {
-                if let Some(inum) = device.property_value("ID_USB_INTERFACE_NUM") {
-                    if let Some(iface) = iface {
-                        if inum == iface.as_str() {
-                            info!("Using device at: {:?} for keyboard polling", dev_node);
-                            return Ok(dev_node.to_string_lossy().to_string());
-                        }
-                    }
-                }
-            }
-        }
-
-        warn!("Did not find keyboard consumer device node, if expected functions are missing please file an issue at {}", HELP_ADDRESS);
-        Err(RogError::MissingFunction(
-            "ASUS keyboard 'Consumer Device' node not found".into(),
-        ))
-    }
-
-    pub fn do_command(&mut self, mode: AuraModes, config: &mut Config) -> Result<(), RogError> {
-        self.set_and_save(mode, config)
-    }
-
-    /// Should only be used if the bytes you are writing are verified correct
-    #[inline]
-    fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
-        if let Some(led_node) = &self.led_node {
-            if let Ok(mut file) = OpenOptions::new().write(true).open(led_node) {
-                return file
-                    .write_all(message)
-                    .map_err(|err| RogError::Write("write_bytes".into(), err));
-            }
-        }
-        Err(RogError::NotSupported)
-    }
-
-    /// Write an effect block
-    #[inline]
-    fn write_effect(&mut self, effect: &[Vec<u8>]) -> Result<(), RogError> {
-        if self.flip_effect_write {
-            for row in effect.iter().rev() {
-                self.write_bytes(row)?;
-            }
-        } else {
-            for row in effect.iter() {
-                self.write_bytes(row)?;
-            }
-        }
-        self.flip_effect_write = !self.flip_effect_write;
-        Ok(())
-    }
-
-    /// Used to set a builtin mode and save the settings for it
-    ///
-    /// This needs to be universal so that settings applied by dbus stick
-    #[inline]
-    fn set_and_save(&mut self, mode: AuraModes, config: &mut Config) -> Result<(), RogError> {
-        match mode {
-            AuraModes::LedBrightness(n) => {
-                let bytes: [u8; LED_MSG_LEN] = (&mode).into();
-                self.write_bytes(&bytes)?;
-                config.read();
-                config.kbd_led_brightness = n;
-                config.write();
-                info!("LED brightness set to {:#?}", n);
-            }
-            AuraModes::PerKey(v) => {
-                if v.is_empty() || v[0].is_empty() {
-                    let bytes = KeyColourArray::get_init_msg();
-                    self.write_bytes(&bytes)?;
-                } else {
-                    self.write_effect(&v)?;
-                }
-            }
-            _ => {
-                config.read();
-                let mode_num: u8 = u8::from(&mode);
-                self.write_mode(&mode)?;
-                config.kbd_backlight_mode = mode_num;
-                config.set_mode_data(mode);
-                config.write();
-            }
-        }
-        Ok(())
-    }
-
-    #[inline]
-    fn toggle_mode(&mut self, reverse: bool, config: &mut Config) -> Result<(), RogError> {
-        let current = config.kbd_backlight_mode;
-        if let Some(idx) = self.supported_modes.iter().position(|v| *v == current) {
-            let mut idx = idx;
-            // goes past end of array
-            if reverse {
-                if idx == 0 {
-                    idx = self.supported_modes.len() - 1;
-                } else {
-                    idx -= 1;
-                }
-            } else {
-                idx += 1;
-                if idx == self.supported_modes.len() {
-                    idx = 0;
-                }
-            }
-            let next = self.supported_modes[idx];
-
-            config.read();
-            if let Some(data) = config.get_led_mode_data(next) {
-                self.write_mode(&data)?;
-                config.kbd_backlight_mode = next;
-            }
-            config.write();
-        }
-
-        Ok(())
-    }
-
-    #[inline]
-    fn write_mode(&mut self, mode: &AuraModes) -> Result<(), RogError> {
-        match mode {
-            AuraModes::PerKey(v) => {
-                if v.is_empty() || v[0].is_empty() {
-                    let bytes = KeyColourArray::get_init_msg();
-                    self.write_bytes(&bytes)?;
-                } else {
-                    self.write_effect(v)?;
-                }
-            }
-            _ => {
-                let mode_num: u8 = u8::from(mode);
-                match mode {
-                    AuraModes::MultiStatic(_) => {
-                        if self.supported_modes.contains(&mode_num) {
-                            let bytes: [[u8; LED_MSG_LEN]; 4] = mode.into();
-                            for array in bytes.iter() {
-                                self.write_bytes(array)?;
-                            }
-                        }
-                    }
-                    _ => {
-                        if self.supported_modes.contains(&mode_num) {
-                            let bytes: [u8; LED_MSG_LEN] = mode.into();
-                            self.write_bytes(&bytes)?;
-                        }
-                    }
-                }
-                self.write_bytes(&LED_SET)?;
-                // Changes won't persist unless apply is set
-                self.write_bytes(&LED_APPLY)?;
-            }
-        }
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_rog_bios.rs

@@ -1,261 +0,0 @@
-use crate::{
-    config::Config,
-    ctrl_gfx::{gfx::CtrlGraphics, vendors::GfxVendors},
-    error::RogError,
-    GetSupported,
-};
-//use crate::dbus::DbusEvents;
-use log::{info, warn};
-use serde_derive::{Deserialize, Serialize};
-use std::convert::TryInto;
-use std::fs::OpenOptions;
-use std::io::{Read, Write};
-use std::path::Path;
-use std::sync::Arc;
-use std::sync::Mutex;
-use zbus::dbus_interface;
-
-static ASUS_SWITCH_GRAPHIC_MODE: &str =
-    "/sys/firmware/efi/efivars/AsusSwitchGraphicMode-607005d5-3f75-4b2e-98f0-85ba66797a3e";
-static ASUS_POST_LOGO_SOUND: &str =
-    "/sys/firmware/efi/efivars/AsusPostLogoSound-607005d5-3f75-4b2e-98f0-85ba66797a3e";
-
-pub struct CtrlRogBios {
-    config: Arc<Mutex<Config>>,
-}
-
-#[derive(Serialize, Deserialize)]
-pub struct RogBiosSupportedFunctions {
-    pub post_sound_toggle: bool,
-    pub dedicated_gfx_toggle: bool,
-}
-
-impl GetSupported for CtrlRogBios {
-    type A = RogBiosSupportedFunctions;
-
-    fn get_supported() -> Self::A {
-        RogBiosSupportedFunctions {
-            post_sound_toggle: CtrlRogBios::check_path_exists(ASUS_POST_LOGO_SOUND).is_ok(),
-            dedicated_gfx_toggle: CtrlRogBios::check_path_exists(ASUS_SWITCH_GRAPHIC_MODE).is_ok(),
-        }
-    }
-}
-
-#[dbus_interface(name = "org.asuslinux.Daemon")]
-impl CtrlRogBios {
-    pub fn set_dedicated_graphic_mode(&mut self, dedicated: bool) {
-        Self::set_gfx_mode(dedicated)
-            .map_err(|err| {
-                warn!("CtrlRogBios: set_asus_switch_graphic_mode {}", err);
-                err
-            })
-            .ok();
-        self.notify_dedicated_graphic_mode(dedicated)
-            .map_err(|err| {
-                warn!("CtrlRogBios: notify_asus_switch_graphic_mode {}", err);
-                err
-            })
-            .ok();
-    }
-
-    pub fn dedicated_graphic_mode(&self) -> i8 {
-        Self::get_gfx_mode()
-            .map_err(|err| {
-                warn!("CtrlRogBios: get_gfx_mode {}", err);
-                err
-            })
-            .unwrap_or(-1)
-    }
-
-    #[dbus_interface(signal)]
-    pub fn notify_dedicated_graphic_mode(&self, dedicated: bool) -> zbus::Result<()> {}
-
-    // // // // // // // // // //
-
-    pub fn set_post_boot_sound(&mut self, on: bool) {
-        Self::set_boot_sound(on)
-            .map_err(|err| {
-                warn!("CtrlRogBios: set_post_boot_sound {}", err);
-                err
-            })
-            .ok();
-        self.notify_post_boot_sound(on)
-            .map_err(|err| {
-                warn!("CtrlRogBios: notify_post_boot_sound {}", err);
-                err
-            })
-            .ok();
-    }
-
-    pub fn post_boot_sound(&self) -> i8 {
-        Self::get_boot_sound()
-            .map_err(|err| {
-                warn!("CtrlRogBios: get_boot_sound {}", err);
-                err
-            })
-            .unwrap_or(-1)
-    }
-
-    #[dbus_interface(signal)]
-    pub fn notify_post_boot_sound(&self, dedicated: bool) -> zbus::Result<()> {}
-}
-
-impl crate::ZbusAdd for CtrlRogBios {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(&"/org/asuslinux/RogBios".try_into().unwrap(), self)
-            .map_err(|err| {
-                warn!("CtrlRogBios: add_to_server {}", err);
-                err
-            })
-            .ok();
-    }
-}
-
-impl crate::Reloadable for CtrlRogBios {
-    fn reload(&mut self) -> Result<(), RogError> {
-        Ok(())
-    }
-}
-
-impl CtrlRogBios {
-    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
-        match CtrlRogBios::check_path_exists(ASUS_SWITCH_GRAPHIC_MODE) {
-            Ok(_) => {
-                CtrlRogBios::set_path_mutable(ASUS_SWITCH_GRAPHIC_MODE)?;
-            }
-            Err(err) => {
-                info!("ROG Switchable Graphics (bios) not detected: {}", err);
-            }
-        }
-
-        match CtrlRogBios::check_path_exists(ASUS_POST_LOGO_SOUND) {
-            Ok(_) => {
-                CtrlRogBios::set_path_mutable(ASUS_POST_LOGO_SOUND)?;
-            }
-            Err(err) => {
-                info!("ROG boot sound toggle (bios) not detected: {}", err);
-            }
-        }
-
-        Ok(CtrlRogBios { config })
-    }
-
-    fn set_path_mutable(path: &str) -> Result<(), RogError> {
-        use std::process::Command;
-
-        let output = Command::new("/usr/bin/chattr")
-            .arg("-i")
-            .arg(path)
-            .output()
-            .map_err(|err| RogError::Path(path.into(), err))?;
-        info!("Set {} writeable: status: {}", path, output.status);
-        Ok(())
-    }
-
-    fn check_path_exists(path: &str) -> Result<(), RogError> {
-        if Path::new(path).exists() {
-            Ok(())
-        } else {
-            Err(RogError::MissingFunction(path.into()))
-        }
-    }
-
-    pub fn has_dedicated_gfx_toggle() -> bool {
-        if CtrlRogBios::check_path_exists(ASUS_SWITCH_GRAPHIC_MODE).is_ok() {
-            return true;
-        }
-        false
-    }
-
-    pub fn get_gfx_mode() -> Result<i8, RogError> {
-        let path = ASUS_SWITCH_GRAPHIC_MODE;
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(path)
-            .map_err(|err| RogError::Path(path.into(), err))?;
-
-        let mut data = Vec::new();
-        file.read_to_end(&mut data)
-            .map_err(|err| RogError::Read(path.into(), err))?;
-
-        let idx = data.len() - 1;
-        Ok(data[idx] as i8)
-    }
-
-    pub(super) fn set_gfx_mode(dedicated: bool) -> Result<(), RogError> {
-        let path = ASUS_SWITCH_GRAPHIC_MODE;
-        let mut file = OpenOptions::new()
-            .read(true)
-            .write(true)
-            .open(path)
-            .map_err(|err| RogError::Path(path.into(), err))?;
-
-        let mut data = Vec::new();
-        file.read_to_end(&mut data).unwrap();
-
-        let idx = data.len() - 1;
-        if dedicated {
-            data[idx] = 1;
-            info!("Set system-level graphics mode: Dedicated Nvidia");
-        } else {
-            data[idx] = 0;
-            info!("Set system-level graphics mode: Optimus");
-        }
-        file.write_all(&data)
-            .map_err(|err| RogError::Path(path.into(), err))?;
-
-        if let Ok(ded) = CtrlRogBios::get_gfx_mode() {
-            if let Ok(vendor) = CtrlGraphics::get_vendor() {
-                if ded == 1 && vendor != "nvidia" {
-                    warn!("Dedicated GFX toggle is on but driver mode is not nvidia \nSetting to nvidia driver mode");
-                    CtrlGraphics::set_gfx_config(GfxVendors::Nvidia)
-                        .unwrap_or_else(|err| warn!("Gfx controller: {}", err));
-                }
-            }
-        }
-
-        Ok(())
-    }
-
-    pub fn get_boot_sound() -> Result<i8, RogError> {
-        let path = ASUS_POST_LOGO_SOUND;
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(path)
-            .map_err(|err| RogError::Path(path.into(), err))?;
-
-        let mut data = Vec::new();
-        file.read_to_end(&mut data)
-            .map_err(|err| RogError::Read(path.into(), err))?;
-
-        let idx = data.len() - 1;
-        Ok(data[idx] as i8)
-    }
-
-    pub(super) fn set_boot_sound(on: bool) -> Result<(), RogError> {
-        let path = ASUS_POST_LOGO_SOUND;
-        let mut file = OpenOptions::new()
-            .read(true)
-            .write(true)
-            .open(path)
-            .map_err(|err| RogError::Path(path.into(), err))?;
-
-        let mut data = Vec::new();
-        file.read_to_end(&mut data)
-            .map_err(|err| RogError::Read(path.into(), err))?;
-
-        let idx = data.len() - 1;
-        if on {
-            data[idx] = 1;
-            info!("Set boot POST sound on");
-        } else {
-            data[idx] = 0;
-            info!("Set boot POST sound off");
-        }
-        file.write_all(&data)
-            .map_err(|err| RogError::Path(path.into(), err))?;
-
-        Ok(())
-    }
-}

asus-nb-ctrl/src/daemon.rs

@@ -1,191 +0,0 @@
-use daemon::ctrl_charge::CtrlCharge;
-use daemon::ctrl_fan_cpu::{CtrlFanAndCPU, DbusFanAndCpu};
-use daemon::ctrl_leds::{CtrlKbdBacklight, DbusKbdBacklight};
-use daemon::laptops::match_laptop;
-use daemon::{
-    config::Config, laptops::print_board_info, supported::SupportedFunctions, GetSupported,
-};
-use daemon::{
-    ctrl_anime::CtrlAnimeDisplay,
-    ctrl_gfx::{gfx::CtrlGraphics, vendors::GfxVendors},
-};
-
-use asus_nb::DBUS_NAME;
-use daemon::{CtrlTask, Reloadable, ZbusAdd};
-use log::LevelFilter;
-use log::{error, info, warn};
-use std::error::Error;
-use std::io::Write;
-use std::sync::Arc;
-use std::sync::Mutex;
-
-use daemon::ctrl_rog_bios::CtrlRogBios;
-use std::convert::Into;
-use std::convert::TryInto;
-use zbus::fdo;
-use zbus::Connection;
-
-pub fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut logger = env_logger::Builder::new();
-    logger
-        .target(env_logger::Target::Stdout)
-        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
-        .init();
-
-    info!("Version: {}", daemon::VERSION);
-    start_daemon()?;
-    Ok(())
-}
-
-// Timing is such that:
-// - interrupt write is minimum 1ms (sometimes lower)
-// - read interrupt must timeout, minimum of 1ms
-// - for a single usb packet, 2ms total.
-// - to maintain constant times of 1ms, per-key colours should use
-//   the effect endpoint so that the complete colour block is written
-//   as fast as 1ms per row of the matrix inside it. (10ms total time)
-fn start_daemon() -> Result<(), Box<dyn Error>> {
-    let supported = SupportedFunctions::get_supported();
-    print_board_info();
-    println!("{}", serde_json::to_string_pretty(&supported).unwrap());
-
-    let laptop = match_laptop();
-    let config = if let Some(laptop) = laptop.as_ref() {
-        Config::load(laptop.supported_modes())
-    } else {
-        Config::load(&[])
-    };
-
-    let connection = Connection::new_system()?;
-    fdo::DBusProxy::new(&connection)?
-        .request_name(DBUS_NAME, fdo::RequestNameFlags::ReplaceExisting.into())?;
-    let mut object_server = zbus::ObjectServer::new(&connection);
-
-    supported.add_to_server(&mut object_server);
-
-    let enable_gfx_switching = config.gfx_managed;
-    let config = Arc::new(Mutex::new(config));
-
-    match CtrlRogBios::new(config.clone()) {
-        Ok(mut ctrl) => {
-            // Do a reload of any settings
-            ctrl.reload()
-                .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
-            // Then register to dbus server
-            ctrl.add_to_server(&mut object_server);
-        }
-        Err(err) => {
-            error!("rog_bios_control: {}", err);
-        }
-    }
-
-    match CtrlCharge::new(config.clone()) {
-        Ok(mut ctrl) => {
-            // Do a reload of any settings
-            ctrl.reload()
-                .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
-            // Then register to dbus server
-            ctrl.add_to_server(&mut object_server);
-        }
-        Err(err) => {
-            error!("charge_control: {}", err);
-        }
-    }
-
-    match CtrlAnimeDisplay::new() {
-        Ok(ctrl) => {
-            ctrl.add_to_server(&mut object_server);
-        }
-        Err(err) => {
-            error!("AniMe control: {}", err);
-        }
-    }
-
-    if enable_gfx_switching {
-        match CtrlGraphics::new(config.clone()) {
-            Ok(mut ctrl) => {
-                // Need to check if a laptop has the dedicated gfx switch
-                if CtrlRogBios::has_dedicated_gfx_toggle() {
-                    if let Ok(ded) = CtrlRogBios::get_gfx_mode() {
-                        if let Ok(vendor) = CtrlGraphics::get_vendor() {
-                            if ded == 1 && vendor != "nvidia" {
-                                error!("Dedicated GFX toggle is on but driver mode is not nvidia \nSetting to nvidia driver mode");
-                                error!("You must reboot to enable Nvidia driver");
-                                CtrlGraphics::set_gfx_config(GfxVendors::Nvidia)?;
-                            } else if ded == 0 {
-                                info!("Dedicated GFX toggle is off");
-                            }
-                        }
-                    }
-                } else {
-                    ctrl.reload()
-                        .unwrap_or_else(|err| warn!("Gfx controller: {}", err));
-                }
-                ctrl.add_to_server(&mut object_server);
-            }
-            Err(err) => {
-                error!("Gfx control: {}", err);
-            }
-        }
-    }
-
-    // Collect tasks for task thread
-    let mut tasks: Vec<Arc<Mutex<dyn CtrlTask + Send>>> = Vec::new();
-
-    if let Ok(mut ctrl) = CtrlFanAndCPU::new(config.clone()).map_err(|err| {
-        error!("Profile control: {}", err);
-    }) {
-        ctrl.reload()
-            .unwrap_or_else(|err| warn!("Profile control: {}", err));
-        let tmp = Arc::new(Mutex::new(ctrl));
-        DbusFanAndCpu::new(tmp.clone()).add_to_server(&mut object_server);
-        tasks.push(tmp);
-    };
-
-    if let Some(laptop) = laptop {
-        if let Ok(ctrl) = CtrlKbdBacklight::new(
-            laptop.usb_product(),
-            laptop.condev_iface(),
-            laptop.supported_modes().to_owned(),
-            config,
-        )
-        .map_err(|err| {
-            error!("Keyboard control: {}", err);
-        }) {
-            let tmp = Arc::new(Mutex::new(ctrl));
-            DbusKbdBacklight::new(tmp.clone()).add_to_server(&mut object_server);
-            tasks.push(tmp);
-        }
-    }
-
-    // TODO: implement messaging between threads to check fails
-    // These tasks generally read a sys path or file to check for a
-    // change
-    let _handle = std::thread::Builder::new()
-        .name("asusd watch".to_string())
-        .spawn(move || loop {
-            std::thread::sleep(std::time::Duration::from_millis(100));
-
-            for ctrl in tasks.iter() {
-                if let Ok(mut lock) = ctrl.try_lock() {
-                    lock.do_task()
-                        .map_err(|err| {
-                            warn!("do_task error: {}", err);
-                        })
-                        .ok();
-                }
-            }
-        });
-
-    object_server.with(&"/org/asuslinux/Charge".try_into()?, |obj: &CtrlCharge| {
-        let x = obj.limit();
-        obj.notify_charge(x as u8)
-    })?;
-
-    loop {
-        if let Err(err) = object_server.try_handle_next() {
-            eprintln!("{}", err);
-        }
-    }
-}

asus-nb-ctrl/src/laptops.rs

@@ -1,150 +0,0 @@
-use asus_nb::aura_modes::{AuraModes, BREATHING, STATIC, STROBE};
-use log::{info, warn};
-use serde_derive::{Deserialize, Serialize};
-use std::fs::OpenOptions;
-use std::io::Read;
-
-pub static LEDMODE_CONFIG_PATH: &str = "/etc/asusd/asusd-ledmodes.toml";
-
-pub static HELP_ADDRESS: &str = "https://gitlab.com/asus-linux/asus-nb-ctrl";
-
-pub struct LaptopBase {
-    usb_product: String,
-    condev_iface: Option<String>, // required for finding the Consumer Device interface
-    supported_modes: Vec<u8>,
-}
-
-impl LaptopBase {
-    pub fn usb_product(&self) -> &str {
-        &self.usb_product
-    }
-    pub fn condev_iface(&self) -> Option<&String> {
-        self.condev_iface.as_ref()
-    }
-    pub fn supported_modes(&self) -> &[u8] {
-        &self.supported_modes
-    }
-}
-
-pub fn match_laptop() -> Option<LaptopBase> {
-    for device in rusb::devices().expect("Failed here").iter() {
-        let device_desc = device.device_descriptor().expect("Failed there");
-        if device_desc.vendor_id() == 0x0b05 {
-            match device_desc.product_id() {
-                0x1866 => {
-                    let laptop = select_1866_device("1866".to_owned());
-                    return Some(laptop);
-                }
-                0x1869 => return Some(select_1866_device("1869".to_owned())),
-                0x1854 => {
-                    info!("Found GL753 or similar");
-                    return Some(LaptopBase {
-                        usb_product: "1854".to_string(),
-                        condev_iface: None,
-                        supported_modes: vec![STATIC, BREATHING, STROBE],
-                    });
-                }
-                _ => {}
-            }
-        }
-    }
-    warn!(
-        "Unsupported laptop, please request support at {}",
-        HELP_ADDRESS
-    );
-    warn!("Continuing with minimal support");
-    None
-}
-
-fn select_1866_device(prod: String) -> LaptopBase {
-    let dmi = sysfs_class::DmiId::default();
-    let board_name = dmi.board_name().expect("Could not get board_name");
-    let prod_family = dmi.product_family().expect("Could not get product_family");
-
-    let mut laptop = LaptopBase {
-        usb_product: prod,
-        condev_iface: Some("02".to_owned()),
-        supported_modes: vec![],
-    };
-
-    if let Some(modes) = LEDModeGroup::load_from_config() {
-        if let Some(led_modes) = modes.matcher(&prod_family, &board_name) {
-            laptop.supported_modes = led_modes;
-            return laptop;
-        }
-    }
-    laptop
-}
-
-pub fn print_board_info() {
-    let dmi = sysfs_class::DmiId::default();
-    let board_name = dmi.board_name().expect("Could not get board_name");
-    let prod_name = dmi.product_name().expect("Could not get product_name");
-    let prod_family = dmi.product_family().expect("Could not get product_family");
-
-    info!("Product name: {}", prod_name.trim());
-    info!("Product family: {}", prod_family.trim());
-    info!("Board name: {}", board_name.trim());
-}
-
-pub fn print_modes(supported_modes: &[u8]) {
-    if !supported_modes.is_empty() {
-        info!("Supported Keyboard LED modes are:");
-        for mode in supported_modes {
-            let mode = <&str>::from(&<AuraModes>::from(*mode));
-            info!("- {}", mode);
-        }
-        info!(
-            "If these modes are incorrect or missing please request support at {}",
-            HELP_ADDRESS
-        );
-    } else {
-        info!("No RGB control available");
-    }
-}
-
-#[derive(Debug, Deserialize, Serialize)]
-struct LEDModeGroup {
-    led_modes: Vec<LEDModes>,
-}
-
-impl LEDModeGroup {
-    /// Consumes the LEDModes
-    fn matcher(self, prod_family: &str, board_name: &str) -> Option<Vec<u8>> {
-        for led_modes in self.led_modes {
-            if prod_family.contains(&led_modes.prod_family) {
-                for board in led_modes.board_names {
-                    if board_name.contains(&board) {
-                        info!("Matched to {} {}", led_modes.prod_family, board);
-                        return Some(led_modes.led_modes);
-                    }
-                }
-            }
-        }
-        None
-    }
-
-    fn load_from_config() -> Option<Self> {
-        if let Ok(mut file) = OpenOptions::new().read(true).open(&LEDMODE_CONFIG_PATH) {
-            let mut buf = String::new();
-            if let Ok(l) = file.read_to_string(&mut buf) {
-                if l == 0 {
-                    warn!("{} is empty", LEDMODE_CONFIG_PATH);
-                } else {
-                    return Some(toml::from_str(&buf).unwrap_or_else(|_| {
-                        panic!("Could not deserialise {}", LEDMODE_CONFIG_PATH)
-                    }));
-                }
-            }
-        }
-        warn!("Does {} exist?", LEDMODE_CONFIG_PATH);
-        None
-    }
-}
-
-#[derive(Debug, Deserialize, Serialize)]
-struct LEDModes {
-    prod_family: String,
-    board_names: Vec<String>,
-    led_modes: Vec<u8>,
-}

asus-nb-ctrl/src/lib.rs

@@ -1,52 +0,0 @@
-#![deny(unused_must_use)]
-/// Configuration loading, saving
-pub mod config;
-///
-pub mod ctrl_anime;
-///
-pub mod ctrl_charge;
-///
-pub mod ctrl_fan_cpu;
-///
-pub mod ctrl_gfx;
-///
-pub mod ctrl_leds;
-/// Control ASUS bios function such as boot sound, Optimus/Dedicated gfx mode
-pub mod ctrl_rog_bios;
-/// Laptop matching to determine capabilities
-pub mod laptops;
-
-/// Fetch all supported functions for the laptop
-pub mod supported;
-
-mod error;
-
-use crate::error::RogError;
-use config::Config;
-use zbus::ObjectServer;
-
-pub static VERSION: &str = env!("CARGO_PKG_VERSION");
-
-pub trait Reloadable {
-    fn reload(&mut self) -> Result<(), RogError>;
-}
-
-pub trait ZbusAdd {
-    fn add_to_server(self, server: &mut ObjectServer);
-}
-
-pub trait CtrlTask {
-    fn do_task(&mut self) -> Result<(), RogError>;
-}
-
-pub trait CtrlTaskComplex {
-    type A;
-
-    fn do_task(&mut self, config: &mut Config, event: Self::A);
-}
-
-pub trait GetSupported {
-    type A;
-
-    fn get_supported() -> Self::A;
-}

asus-nb-ctrl/src/main.rs

@@ -1,377 +0,0 @@
-use asus_nb::{
-    anime_dbus::AniMeDbusWriter,
-    cli_options::{AniMeActions, AniMeStatusValue, LedBrightness, SetAuraBuiltin},
-    core_dbus::AuraDbusClient,
-    profile::{ProfileCommand, ProfileEvent},
-};
-use daemon::{ctrl_fan_cpu::FanLevel, ctrl_gfx::vendors::GfxVendors};
-use gumdrop::{Opt, Options};
-use log::LevelFilter;
-use std::{env::args, io::Write, process::Command};
-use yansi_term::Colour::Green;
-use yansi_term::Colour::Red;
-
-#[derive(Default, Options)]
-struct CLIStart {
-    #[options(help_flag, help = "print help message")]
-    help: bool,
-    #[options(help = "show program version number")]
-    version: bool,
-    #[options(help = "show supported functions of this laptop")]
-    show_supported: bool,
-    #[options(meta = "", help = "<off, low, med, high>")]
-    kbd_bright: Option<LedBrightness>,
-    #[options(
-        meta = "",
-        help = "<silent, normal, boost>, set fan mode independent of profile"
-    )]
-    fan_mode: Option<FanLevel>,
-    #[options(meta = "", help = "<20-100>")]
-    chg_limit: Option<u8>,
-    #[options(command)]
-    command: Option<CliCommand>,
-}
-
-#[derive(Options)]
-enum CliCommand {
-    #[options(help = "Set the keyboard lighting from built-in modes")]
-    LedMode(LedModeCommand),
-    #[options(help = "Create and configure profiles")]
-    Profile(ProfileCommand),
-    #[options(help = "Set the graphics mode")]
-    Graphics(GraphicsCommand),
-    #[options(name = "anime", help = "Manage AniMe Matrix")]
-    AniMe(AniMeCommand),
-    #[options(help = "Change bios settings")]
-    Bios(BiosCommand),
-}
-
-#[derive(Options)]
-struct LedModeCommand {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(help = "switch to next aura mode")]
-    next_mode: bool,
-    #[options(help = "switch to previous aura mode")]
-    prev_mode: bool,
-    #[options(command)]
-    command: Option<SetAuraBuiltin>,
-}
-
-#[derive(Options)]
-struct GraphicsCommand {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(
-        meta = "",
-        help = "Set graphics mode: <nvidia, hybrid, compute, integrated>"
-    )]
-    mode: Option<GfxVendors>,
-    #[options(help = "Get the current mode")]
-    get: bool,
-    #[options(help = "Get the current power status")]
-    pow: bool,
-    #[options(help = "Do not ask for confirmation")]
-    force: bool,
-}
-
-#[derive(Options)]
-struct AniMeCommand {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(
-        meta = "",
-        help = "turn on/off the panel (accept/reject write requests)"
-    )]
-    turn: Option<AniMeStatusValue>,
-    #[options(meta = "", help = "turn on/off the panel at boot (with Asus effect)")]
-    boot: Option<AniMeStatusValue>,
-    #[options(command)]
-    command: Option<AniMeActions>,
-}
-
-#[derive(Options, Debug)]
-struct BiosCommand {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(meta = "", no_long, help = "toggle bios POST sound")]
-    post_sound_set: Option<bool>,
-    #[options(no_long, help = "read bios POST sound")]
-    post_sound_get: bool,
-    #[options(meta = "", no_long, help = "toggle GPU to/from dedicated mode")]
-    dedicated_gfx_set: Option<bool>,
-    #[options(no_long, help = "get GPU mode")]
-    dedicated_gfx_get: bool,
-}
-
-fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut logger = env_logger::Builder::new();
-    logger
-        .target(env_logger::Target::Stdout)
-        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
-        .init();
-
-    let mut args: Vec<String> = args().collect();
-    args.remove(0);
-
-    let parsed: CLIStart;
-    let missing_argument_k = gumdrop::Error::missing_argument(Opt::Short('k'));
-    match CLIStart::parse_args_default(&args) {
-        Ok(p) => {
-            parsed = p;
-        }
-        Err(err) if err.to_string() == missing_argument_k.to_string() => {
-            parsed = CLIStart {
-                kbd_bright: Some(LedBrightness::new(None)),
-                ..Default::default()
-            };
-        }
-        Err(err) => {
-            eprintln!("source {}", err);
-            std::process::exit(2);
-        }
-    }
-
-    if parsed.help_requested() {
-        // As help option don't work with `parse_args_default`
-        // we will call `parse_args_default_or_exit` instead
-        CLIStart::parse_args_default_or_exit();
-    }
-
-    if parsed.version {
-        println!("Version: {}", daemon::VERSION);
-    }
-
-    let dbus_client = AuraDbusClient::new()?;
-    let anime_dbus_client = AniMeDbusWriter::new()?;
-
-    match parsed.command {
-        Some(CliCommand::LedMode(mode)) => {
-            if (mode.command.is_none() && !mode.prev_mode && !mode.next_mode) || mode.help {
-                println!("Missing arg or command\n\n{}", mode.self_usage());
-                if let Some(lst) = mode.self_command_list() {
-                    println!("\n{}", lst);
-                }
-            }
-            if mode.next_mode && mode.prev_mode {
-                println!("Please specify either next or previous")
-            }
-            if mode.next_mode {
-                dbus_client.next_keyboard_led_mode()?;
-            } else if mode.prev_mode {
-                dbus_client.prev_keyboard_led_mode()?;
-            } else if let Some(command) = mode.command {
-                dbus_client.write_builtin_mode(&command.into())?
-            }
-        }
-        Some(CliCommand::Profile(cmd)) => {
-            if (!cmd.next
-                && !cmd.create
-                && cmd.curve.is_none()
-                && cmd.max_percentage.is_none()
-                && cmd.min_percentage.is_none()
-                && cmd.preset.is_none()
-                && cmd.profile.is_none()
-                && cmd.turbo.is_none())
-                || cmd.help
-            {
-                println!("Missing arg or command\n\n{}", cmd.self_usage());
-                if let Some(lst) = cmd.self_command_list() {
-                    println!("\n{}", lst);
-                }
-            }
-            if cmd.next {
-                dbus_client.next_fan_profile()?;
-            } else {
-                dbus_client.write_profile_command(&ProfileEvent::Cli(cmd))?
-            }
-        }
-        Some(CliCommand::Graphics(cmd)) => do_gfx(cmd, &dbus_client)?,
-        Some(CliCommand::AniMe(cmd)) => {
-            if (cmd.command.is_none() && cmd.boot.is_none() && cmd.turn.is_none()) || cmd.help {
-                println!("Missing arg or command\n\n{}", cmd.self_usage());
-                if let Some(lst) = cmd.self_command_list() {
-                    println!("\n{}", lst);
-                }
-            }
-            if let Some(anime_turn) = cmd.turn {
-                anime_dbus_client.turn_on_off(anime_turn.into())?
-            }
-            if let Some(anime_boot) = cmd.boot {
-                anime_dbus_client.turn_boot_on_off(anime_boot.into())?
-            }
-            if let Some(action) = cmd.command {
-                match action {
-                    AniMeActions::Leds(anime_leds) => {
-                        let led_brightness = anime_leds.led_brightness();
-                        anime_dbus_client.set_leds_brightness(led_brightness)?;
-                    }
-                }
-            }
-        }
-        Some(CliCommand::Bios(cmd)) => {
-            if (cmd.dedicated_gfx_set.is_none()
-                && !cmd.dedicated_gfx_get
-                && cmd.post_sound_set.is_none()
-                && !cmd.post_sound_get)
-                || cmd.help
-            {
-                println!("Missing arg or command\n\n{}", cmd.self_usage());
-                if let Some(lst) = cmd.self_command_list() {
-                    println!("\n{}", lst);
-                }
-            }
-
-            if let Some(opt) = cmd.post_sound_set {
-                dbus_client.set_bios_post_sound(opt)?;
-            }
-            if cmd.post_sound_get {
-                let res = if dbus_client.get_bios_post_sound()? == 1 {
-                    true
-                } else {
-                    false
-                };
-                println!("Bios POST sound on: {}", res);
-            }
-            if let Some(opt) = cmd.dedicated_gfx_set {
-                dbus_client.set_bios_dedicated_gfx(opt)?;
-            }
-            if cmd.dedicated_gfx_get {
-                let res = if dbus_client.get_bios_dedicated_gfx()? == 1 {
-                    true
-                } else {
-                    false
-                };
-                println!("Bios dedicated GPU on: {}", res);
-            }
-        }
-        None => {
-            if (!parsed.show_supported
-                && parsed.kbd_bright.is_none()
-                && parsed.fan_mode.is_none()
-                && parsed.chg_limit.is_none())
-                || parsed.help
-            {
-                println!("{}", CLIStart::usage());
-                println!();
-                println!("{}", CLIStart::command_list().unwrap());
-            }
-        }
-    }
-
-    if let Some(brightness) = parsed.kbd_bright {
-        match brightness.level() {
-            None => {
-                let level = dbus_client.get_led_brightness()?;
-                println!("Current keyboard led brightness: {}", level.to_string());
-            }
-            Some(level) => dbus_client.write_brightness(level)?,
-        }
-    }
-
-    if parsed.show_supported {
-        let dat = dbus_client.get_supported_functions()?;
-        println!("Supported laptop functions:\n{}", dat.to_string());
-    }
-
-    if let Some(fan_level) = parsed.fan_mode {
-        dbus_client.write_fan_mode(fan_level.into())?;
-    }
-    if let Some(chg_limit) = parsed.chg_limit {
-        dbus_client.write_charge_limit(chg_limit)?;
-    }
-    Ok(())
-}
-
-fn do_gfx(
-    command: GraphicsCommand,
-    dbus_client: &AuraDbusClient,
-) -> Result<(), Box<dyn std::error::Error>> {
-    if let Some(mode) = command.mode {
-        println!("Updating settings, please wait...");
-        println!("If this takes longer than 30s, ctrl+c then check `journalctl -b -u asusd`");
-
-        dbus_client.write_gfx_mode(<&str>::from(&mode).into())?;
-        let res = dbus_client.wait_gfx_changed()?;
-        match res.as_str() {
-            "reboot" => {
-                println!(
-                    "{}",
-                    Green.paint("\nGraphics vendor mode changed successfully\n"),
-                );
-                do_gfx_action(
-                    command.force,
-                    Command::new("systemctl").arg("reboot").arg("-i"),
-                    "Reboot Linux PC",
-                    "Please reboot when ready",
-                )?;
-            }
-            "restartx" => {
-                println!(
-                    "{}",
-                    Green.paint("\nGraphics vendor mode changed successfully\n")
-                );
-                do_gfx_action(
-                    command.force,
-                    Command::new("systemctl")
-                        .arg("restart")
-                        .arg("display-manager.service"),
-                    "Restart display-manager server",
-                    "Please restart display-manager when ready",
-                )?;
-                std::process::exit(1)
-            }
-            _ => {
-                println!("{}", Red.paint(&format!("\n{}\n", res.as_str())),);
-                std::process::exit(-1);
-            }
-        }
-        std::process::exit(-1)
-    }
-    if command.get {
-        let res = dbus_client.get_gfx_mode()?;
-        println!("Current graphics mode: {}", res);
-    }
-    if command.pow {
-        let res = dbus_client.get_gfx_pwr()?;
-        if res.contains("active") {
-            println!("Current power status: {}", Red.paint(&format!("{}", res)));
-        } else {
-            println!("Current power status: {}", Green.paint(&format!("{}", res)));
-        }
-    }
-    Ok(())
-}
-
-fn do_gfx_action(
-    no_confirm: bool,
-    command: &mut Command,
-    ask_msg: &str,
-    cancel_msg: &str,
-) -> Result<(), Box<dyn std::error::Error>> {
-    println!("{}? y/n", ask_msg);
-
-    let mut buf = String::new();
-    if no_confirm {
-        let status = command.status()?;
-
-        if !status.success() {
-            println!("systemctl: returned with {}", status);
-        }
-    }
-
-    std::io::stdin().read_line(&mut buf).expect("Input failed");
-    let input = buf.chars().next().unwrap() as char;
-
-    if input == 'Y' || input == 'y' || no_confirm {
-        let status = command.status()?;
-
-        if !status.success() {
-            println!("systemctl: returned with {}", status);
-        }
-    } else {
-        println!("{}", Red.paint(&format!("{}", cancel_msg)));
-    }
-    Ok(())
-}

asus-nb-ctrl/src/supported.rs

@@ -1,56 +0,0 @@
-use std::convert::TryInto;
-
-use log::warn;
-use serde_derive::{Deserialize, Serialize};
-use zbus::dbus_interface;
-
-use crate::{
-    ctrl_anime::{AnimeSupportedFunctions, CtrlAnimeDisplay},
-    ctrl_charge::{ChargeSupportedFunctions, CtrlCharge},
-    ctrl_fan_cpu::{CtrlFanAndCPU, FanCpuSupportedFunctions},
-    ctrl_leds::{CtrlKbdBacklight, LedSupportedFunctions},
-    ctrl_rog_bios::{CtrlRogBios, RogBiosSupportedFunctions},
-    GetSupported,
-};
-
-#[derive(Serialize, Deserialize)]
-pub struct SupportedFunctions {
-    anime_ctrl: AnimeSupportedFunctions,
-    charge_ctrl: ChargeSupportedFunctions,
-    fan_cpu_ctrl: FanCpuSupportedFunctions,
-    keyboard_led: LedSupportedFunctions,
-    rog_bios_ctrl: RogBiosSupportedFunctions,
-}
-
-#[dbus_interface(name = "org.asuslinux.Daemon")]
-impl SupportedFunctions {
-    fn supported_functions(&self) -> String {
-        serde_json::to_string_pretty(self).unwrap()
-    }
-}
-
-impl crate::ZbusAdd for SupportedFunctions {
-    fn add_to_server(self, server: &mut zbus::ObjectServer) {
-        server
-            .at(&"/org/asuslinux/Supported".try_into().unwrap(), self)
-            .map_err(|err| {
-                warn!("SupportedFunctions: add_to_server {}", err);
-                err
-            })
-            .ok();
-    }
-}
-
-impl GetSupported for SupportedFunctions {
-    type A = SupportedFunctions;
-
-    fn get_supported() -> Self::A {
-        SupportedFunctions {
-            keyboard_led: CtrlKbdBacklight::get_supported(),
-            anime_ctrl: CtrlAnimeDisplay::get_supported(),
-            charge_ctrl: CtrlCharge::get_supported(),
-            fan_cpu_ctrl: CtrlFanAndCPU::get_supported(),
-            rog_bios_ctrl: CtrlRogBios::get_supported(),
-        }
-    }
-}

asus-nb/Cargo.toml

@@ -1,24 +0,0 @@
-[package]
-name = "asus-nb"
-version = "2.2.1"
-license = "MPL-2.0"
-readme = "README.md"
-authors = ["Luke <luke@ljones.dev>"]
-repository = "https://gitlab.com/asus-linux/asus-nb-ctrl"
-homepage = "https://gitlab.com/asus-linux/asus-nb-ctrl"
-description = "A small library of effect types and conversions for ROG Aura"
-edition = "2018"
-
-[dependencies]
-gumdrop = "^0.8"
-dbus = { version = "^0.8" }
-serde = "^1.0"
-serde_derive = "^1.0"
-serde_json = "^1.0"
-yansi-term = "^0.1"
-rog_fan_curve = { version = "0.1", features = ["serde"] }
-zbus = "^1.8.0"
-zvariant = "^2.4.0"
-
-[dev-dependencies]
-tinybmp = "^0.2.3"

asus-nb/examples/animatrix.rs

@@ -1,42 +0,0 @@
-use asus_nb::anime_dbus::AniMeDbusWriter;
-use asus_nb::anime_matrix::{AniMeMatrix, AniMePacketType, HEIGHT, WIDTH};
-use tinybmp::{Bmp, Pixel};
-
-fn main() {
-    let mut writer = AniMeDbusWriter::new().unwrap();
-
-    let bmp =
-        Bmp::from_slice(include_bytes!("non-skewed_r.bmp")).expect("Failed to parse BMP image");
-    let pixels: Vec<Pixel> = bmp.into_iter().collect();
-    //assert_eq!(pixels.len(), 56 * 56);
-
-    // Try an outline, top and right
-    let mut matrix = AniMeMatrix::new();
-
-    // Aligned left
-    for (i, px) in pixels.iter().enumerate() {
-        if (px.x as usize / 2) < WIDTH && (px.y as usize) < HEIGHT && px.x % 2 == 0 {
-            let mut c = px.color as u32;
-            matrix.get_mut()[px.y as usize][px.x as usize / 2] = c as u8;
-        }
-    }
-
-    // Throw an alignment border up
-    // {
-    //     let tmp = matrix.get_mut();
-    //     for x in tmp[0].iter_mut() {
-    //         *x = 0xff;
-    //     }
-    //     for row in tmp.iter_mut() {
-    //         row[row.len() - 1] = 0xff;
-    //     }
-    // }
-
-    matrix.debug_print();
-
-    let mut matrix: AniMePacketType = AniMePacketType::from(matrix);
-    // println!("{:?}", matrix[0].to_vec());
-    // println!("{:?}", matrix[1].to_vec());
-
-    writer.write_image(&mut matrix).unwrap();
-}

asus-nb/src/anime_dbus.rs

@@ -1,107 +0,0 @@
-const DBUS_ANIME_PATH: &str = "/org/asuslinux/Anime";
-pub const ANIME_PANE1_PREFIX: [u8; 7] = [0x5e, 0xc0, 0x02, 0x01, 0x00, 0x73, 0x02];
-pub const ANIME_PANE2_PREFIX: [u8; 7] = [0x5e, 0xc0, 0x02, 0x74, 0x02, 0x73, 0x02];
-
-use crate::anime_matrix::{AniMeMatrix, AniMePacketType};
-use crate::DBUS_NAME;
-use dbus::blocking::{Connection, Proxy};
-use std::error::Error;
-use std::{thread, time::Duration};
-
-use crate::dbus_anime::OrgAsuslinuxDaemon as OrgAsuslinuxDaemonAniMe;
-
-/// Interface for the AniMe dot-matrix display
-///
-/// The resolution is 34x56 (1904) but only 1,215 LEDs in the top-left are used.
-/// The display is available only on select GA401 models.
-///
-/// Actual image ratio when displayed is stretched width.
-///
-/// Data structure should be nested array of [[u8; 33]; 56]
-pub struct AniMeDbusWriter {
-    connection: Box<Connection>,
-    block_time: u64,
-}
-
-impl AniMeDbusWriter {
-    #[inline]
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let connection = Connection::new_system()?;
-        Ok(AniMeDbusWriter {
-            connection: Box::new(connection),
-            block_time: 25,
-        })
-    }
-
-    // Create D-Bus proxy
-    fn new_proxy(&self) -> Proxy<&Connection> {
-        self.connection
-            .with_proxy(DBUS_NAME, DBUS_ANIME_PATH, Duration::from_millis(200))
-    }
-
-    fn thread_sleep(&self) {
-        thread::sleep(Duration::from_millis(self.block_time));
-    }
-
-    pub fn write_image_to_buf(_buf: &mut AniMePacketType, _image_data: &[u8]) {
-        unimplemented!("Image format is in progress of being worked out")
-    }
-
-    /// Write an Animatrix image
-    ///
-    /// The expected input here is *two* Vectors, 640 bytes in length.
-    /// The two vectors are each one half of the full image write.
-    ///
-    /// After each write a flush is written, it is assumed that this tells the
-    /// device to go ahead and display the written bytes
-    ///
-    /// # Note: The vectors are expected to contain the full sequence of bytes
-    /// as follows
-    ///
-    /// - Write packet 1: 0x5e 0xc0 0x02 0x01 0x00 0x73 0x02 .. <led brightness>
-    /// - Write packet 2: 0x5e 0xc0 0x02 0x74 0x02 0x73 0x02 .. <led brightness>
-    ///
-    /// Where led brightness is 0..255, low to high
-    #[inline]
-    pub fn write_image(&self, image: &mut AniMePacketType) -> Result<(), Box<dyn Error>> {
-        let proxy = self.new_proxy();
-
-        image[0][..7].copy_from_slice(&ANIME_PANE1_PREFIX);
-        image[1][..7].copy_from_slice(&ANIME_PANE2_PREFIX);
-
-        proxy.set_anime(vec![image[0].to_vec(), image[1].to_vec()])?;
-        self.thread_sleep();
-
-        Ok(())
-    }
-
-    #[inline]
-    pub fn set_leds_brightness(&self, led_brightness: u8) -> Result<(), Box<dyn Error>> {
-        let mut anime_matrix = AniMeMatrix::new();
-
-        anime_matrix.fill_with(led_brightness);
-        self.write_image(&mut AniMePacketType::from(anime_matrix))?;
-
-        Ok(())
-    }
-
-    #[inline]
-    pub fn turn_on_off(&self, status: bool) -> Result<(), Box<dyn Error>> {
-        let proxy = self.new_proxy();
-
-        proxy.set_on_off(status)?;
-        self.thread_sleep();
-
-        Ok(())
-    }
-
-    #[inline]
-    pub fn turn_boot_on_off(&self, status: bool) -> Result<(), Box<dyn Error>> {
-        let proxy = self.new_proxy();
-
-        proxy.set_boot_on_off(status)?;
-        self.thread_sleep();
-
-        Ok(())
-    }
-}

asus-nb/src/anime_matrix.rs

@@ -1,236 +0,0 @@
-pub const WIDTH: usize = 34; // Width is definitely 34 items
-pub const HEIGHT: usize = 56;
-pub type AniMeBufferType = [[u8; WIDTH]; HEIGHT];
-pub type AniMePacketType = [[u8; 640]; 2];
-const BLOCK_START: usize = 7;
-const BLOCK_END: usize = 634;
-use yansi_term::Colour::RGB;
-
-/// Helper structure for writing images.
-///
-///  See the examples for ways to write an image to `AniMeMatrix` format.
-pub struct AniMeMatrix(AniMeBufferType);
-
-impl Default for AniMeMatrix {
-    fn default() -> Self {
-        Self::new()
-    }
-}
-
-impl AniMeMatrix {
-    pub fn new() -> Self {
-        AniMeMatrix([[0u8; WIDTH]; HEIGHT])
-    }
-
-    pub fn get(&self) -> &AniMeBufferType {
-        &self.0
-    }
-
-    pub fn get_mut(&mut self) -> &mut AniMeBufferType {
-        &mut self.0
-    }
-
-    pub fn fill_with(&mut self, fill: u8) {
-        for row in self.0.iter_mut() {
-            for x in row.iter_mut() {
-                *x = fill;
-            }
-        }
-    }
-
-    pub fn debug_print(&self) {
-        // this is the index from right. It is used to progressively shorten rows
-        let mut prog_row_len = WIDTH - 2;
-
-        for (count, row) in self.0.iter().enumerate() {
-            // Write the top block of LEDs (first 7 rows)
-            if count < 6 {
-                if count % 2 != 0 {
-                    print!(" ");
-                } else {
-                    print!("");
-                }
-                let tmp = if count == 0 || count == 1 || count == 3 || count == 5 {
-                    row[1..].iter()
-                } else {
-                    row.iter()
-                };
-                for x in tmp {
-                    print!(" {}", RGB(*x, *x, *x).paint("XY"));
-                }
-
-                println!();
-            } else {
-                // Switch to next block (looks like )
-                if count % 2 != 0 {
-                    // Row after 6 is only 1 less, then rows after 7 follow pattern
-                    if count == 7 {
-                        prog_row_len -= 1;
-                    } else {
-                        prog_row_len -= 2;
-                    }
-                } else {
-                    prog_row_len += 1; // if count 6, 0
-                }
-
-                let index = row.len() - prog_row_len;
-
-                if count % 2 == 0 {
-                    print!(" ");
-                }
-                for (i, x) in row.iter().enumerate() {
-                    if i >= index {
-                        print!(" {}", RGB(*x, *x, *x).paint("XY"));
-                    } else {
-                        print!("   ");
-                    }
-                }
-                println!();
-            }
-        }
-    }
-}
-
-impl From<AniMeMatrix> for AniMePacketType {
-    /// Do conversion from the nested Vec in AniMeMatrix to the two required
-    /// packets suitable for sending over USB
-    #[inline]
-    fn from(anime: AniMeMatrix) -> Self {
-        let mut buffers = [[0; 640]; 2];
-
-        let mut write_index = BLOCK_START;
-        let mut write_block = &mut buffers[0];
-        let mut block1_done = false;
-
-        // this is the index from right. It is used to progressively shorten rows
-        let mut prog_row_len = WIDTH - 2;
-
-        for (count, row) in anime.0.iter().enumerate() {
-            // Write the top block of LEDs (first 7 rows)
-            if count < 6 {
-                for (i, x) in row.iter().enumerate() {
-                    // Rows 0, 1, 3, 5 are short and misaligned
-                    if count == 0 || count == 1 || count == 3 || count == 5 {
-                        if i > 0 {
-                            write_block[write_index - 1] = *x;
-                        }
-                    } else {
-                        write_block[write_index] = *x;
-                    }
-                    write_index += 1;
-                }
-            } else {
-                // Switch to next block (looks like )
-                if count % 2 != 0 {
-                    // Row after 6 is only 1 less, then rows after 7 follow pattern
-                    if count == 7 {
-                        prog_row_len -= 1;
-                    } else {
-                        prog_row_len -= 2;
-                    }
-                } else {
-                    prog_row_len += 1; // if count 6, 0
-                }
-
-                let index = row.len() - prog_row_len;
-                for n in row.iter().skip(index) {
-                    // Require a special case to catch the correct end-of-packet which is
-                    // 6 bytes from the end
-                    if write_index == BLOCK_END && !block1_done {
-                        block1_done = true;
-                        write_block = &mut buffers[1];
-                        write_index = BLOCK_START;
-                    }
-
-                    write_block[write_index] = *n;
-                    write_index += 1;
-                }
-            }
-        }
-        buffers
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use crate::anime_matrix::{AniMeMatrix, AniMePacketType};
-
-    #[test]
-    fn check_data_alignment() {
-        let mut matrix = AniMeMatrix::new();
-        {
-            let tmp = matrix.get_mut();
-            for row in tmp.iter_mut() {
-                row[row.len() - 1] = 0xff;
-            }
-        }
-
-        let matrix: AniMePacketType = AniMePacketType::from(matrix);
-
-        // The bytes at the right of the initial AniMeMatrix should always end up aligned in the
-        // same place after conversion to data packets
-
-        // Check against manually worked out right align
-        assert_eq!(
-            matrix[0].to_vec(),
-            [
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-            ]
-            .to_vec()
-        );
-        assert_eq!(
-            matrix[1].to_vec(),
-            [
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0,
-                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-                255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0,
-                0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0, 0, 0, 0, 0, 255, 0, 0, 0,
-                0, 0, 0, 0
-            ]
-            .to_vec()
-        );
-    }
-}

asus-nb/src/aura_modes.rs

@@ -1,287 +0,0 @@
-use crate::cli_options;
-use crate::cli_options::SetAuraBuiltin;
-use serde_derive::{Deserialize, Serialize};
-
-pub const STATIC: u8 = 0x00;
-pub const BREATHING: u8 = 0x01;
-pub const STROBE: u8 = 0x02;
-pub const RAINBOW: u8 = 0x03;
-pub const STAR: u8 = 0x04;
-pub const RAIN: u8 = 0x05;
-pub const HIGHLIGHT: u8 = 0x06;
-pub const LASER: u8 = 0x07;
-pub const RIPPLE: u8 = 0x08;
-pub const PULSE: u8 = 0x0a;
-pub const COMET: u8 = 0x0b;
-pub const FLASH: u8 = 0x0c;
-pub const MULTISTATIC: u8 = 0x0d;
-pub const PER_KEY: u8 = 0xff;
-
-#[derive(Debug, Clone, Deserialize, Serialize)]
-pub struct Colour(pub u8, pub u8, pub u8);
-impl From<cli_options::Colour> for Colour {
-    fn from(c: cli_options::Colour) -> Self {
-        Colour(c.0, c.1, c.2)
-    }
-}
-impl Default for Colour {
-    fn default() -> Self {
-        Colour(128, 0, 0)
-    }
-}
-
-#[derive(Debug, Copy, Clone, Deserialize, Serialize)]
-pub enum Speed {
-    Low = 0xe1,
-    Med = 0xeb,
-    High = 0xf5,
-}
-impl From<cli_options::Speed> for Speed {
-    fn from(s: cli_options::Speed) -> Self {
-        match s {
-            cli_options::Speed::Low => Speed::Low,
-            cli_options::Speed::Med => Speed::Med,
-            cli_options::Speed::High => Speed::High,
-        }
-    }
-}
-impl Default for Speed {
-    fn default() -> Self {
-        Speed::Med
-    }
-}
-
-/// Used for Rainbow mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Debug, Copy, Clone, Deserialize, Serialize)]
-pub enum Direction {
-    Right,
-    Left,
-    Up,
-    Down,
-}
-impl From<cli_options::Direction> for Direction {
-    fn from(s: cli_options::Direction) -> Self {
-        match s {
-            cli_options::Direction::Right => Direction::Right,
-            cli_options::Direction::Left => Direction::Left,
-            cli_options::Direction::Up => Direction::Up,
-            cli_options::Direction::Down => Direction::Down,
-        }
-    }
-}
-impl Default for Direction {
-    fn default() -> Self {
-        Direction::Right
-    }
-}
-
-#[derive(Debug, Clone, Default, Deserialize, Serialize)]
-pub struct TwoColourSpeed {
-    pub colour: Colour,
-    pub colour2: Colour,
-    pub speed: Speed,
-}
-impl From<cli_options::TwoColourSpeed> for TwoColourSpeed {
-    fn from(mode: cli_options::TwoColourSpeed) -> Self {
-        TwoColourSpeed {
-            colour: mode.colour.into(),
-            colour2: mode.colour2.into(),
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Debug, Clone, Default, Deserialize, Serialize)]
-pub struct SingleSpeed {
-    pub speed: Speed,
-}
-impl From<cli_options::SingleSpeed> for SingleSpeed {
-    fn from(mode: cli_options::SingleSpeed) -> Self {
-        SingleSpeed {
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Debug, Clone, Default, Deserialize, Serialize)]
-pub struct SingleColour {
-    pub colour: Colour,
-}
-impl From<cli_options::SingleColour> for SingleColour {
-    fn from(mode: cli_options::SingleColour) -> Self {
-        SingleColour {
-            colour: mode.colour.into(),
-        }
-    }
-}
-
-#[derive(Debug, Clone, Default, Deserialize, Serialize)]
-pub struct MultiColour {
-    pub colour1: Colour,
-    pub colour2: Colour,
-    pub colour3: Colour,
-    pub colour4: Colour,
-}
-impl From<cli_options::MultiColour> for MultiColour {
-    fn from(mode: cli_options::MultiColour) -> Self {
-        MultiColour {
-            colour1: mode.colour1.into(),
-            colour2: mode.colour2.into(),
-            colour3: mode.colour3.into(),
-            colour4: mode.colour4.into(),
-        }
-    }
-}
-
-#[derive(Debug, Clone, Default, Deserialize, Serialize)]
-pub struct SingleSpeedDirection {
-    pub direction: Direction,
-    pub speed: Speed,
-}
-impl From<cli_options::SingleSpeedDirection> for SingleSpeedDirection {
-    fn from(mode: cli_options::SingleSpeedDirection) -> Self {
-        SingleSpeedDirection {
-            direction: mode.direction.into(),
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Debug, Clone, Default, Deserialize, Serialize)]
-pub struct SingleColourSpeed {
-    pub colour: Colour,
-    pub speed: Speed,
-}
-impl From<cli_options::SingleColourSpeed> for SingleColourSpeed {
-    fn from(mode: cli_options::SingleColourSpeed) -> Self {
-        SingleColourSpeed {
-            colour: mode.colour.into(),
-            speed: mode.speed.into(),
-        }
-    }
-}
-
-#[derive(Debug, Clone, Deserialize, Serialize)]
-pub enum AuraModes {
-    Static(SingleColour),
-    Breathe(TwoColourSpeed),
-    Strobe(SingleSpeed),
-    Rainbow(SingleSpeedDirection),
-    Star(TwoColourSpeed),
-    Rain(SingleSpeed),
-    Highlight(SingleColourSpeed),
-    Laser(SingleColourSpeed),
-    Ripple(SingleColourSpeed),
-    Pulse(SingleColour),
-    Comet(SingleColour),
-    Flash(SingleColour),
-    MultiStatic(MultiColour),
-    LedBrightness(u8),
-    // TODO: use a serializable structure for this (KeyColourArray)
-    PerKey(Vec<Vec<u8>>),
-}
-
-impl From<SetAuraBuiltin> for AuraModes {
-    fn from(mode: SetAuraBuiltin) -> Self {
-        match mode {
-            SetAuraBuiltin::Static(x) => AuraModes::Static(x.into()),
-            SetAuraBuiltin::Breathe(x) => AuraModes::Breathe(x.into()),
-            SetAuraBuiltin::Strobe(x) => AuraModes::Strobe(x.into()),
-            SetAuraBuiltin::Rainbow(x) => AuraModes::Rainbow(x.into()),
-            SetAuraBuiltin::Star(x) => AuraModes::Star(x.into()),
-            SetAuraBuiltin::Rain(x) => AuraModes::Rain(x.into()),
-            SetAuraBuiltin::Highlight(x) => AuraModes::Highlight(x.into()),
-            SetAuraBuiltin::Laser(x) => AuraModes::Laser(x.into()),
-            SetAuraBuiltin::Ripple(x) => AuraModes::Ripple(x.into()),
-            SetAuraBuiltin::Pulse(x) => AuraModes::Pulse(x.into()),
-            SetAuraBuiltin::Comet(x) => AuraModes::Comet(x.into()),
-            SetAuraBuiltin::Flash(x) => AuraModes::Flash(x.into()),
-            SetAuraBuiltin::MultiStatic(x) => AuraModes::MultiStatic(x.into()),
-        }
-    }
-}
-
-/// Very specific mode conversion required because numbering isn't linear
-impl From<AuraModes> for u8 {
-    fn from(mode: AuraModes) -> Self {
-        u8::from(&mode)
-    }
-}
-
-/// Very specific mode conversion required because numbering isn't linear
-impl From<&mut AuraModes> for u8 {
-    fn from(mode: &mut AuraModes) -> Self {
-        u8::from(&*mode)
-    }
-}
-
-/// Very specific mode conversion required because numbering isn't linear
-impl From<&AuraModes> for u8 {
-    fn from(mode: &AuraModes) -> Self {
-        match mode {
-            AuraModes::Static(_) => STATIC,
-            AuraModes::Breathe(_) => BREATHING,
-            AuraModes::Strobe(_) => STROBE,
-            AuraModes::Rainbow(_) => RAINBOW,
-            AuraModes::Star(_) => STAR,
-            AuraModes::Rain(_) => RAIN,
-            AuraModes::Highlight(_) => HIGHLIGHT,
-            AuraModes::Laser(_) => LASER,
-            AuraModes::Ripple(_) => RIPPLE,
-            AuraModes::Pulse(_) => PULSE,
-            AuraModes::Comet(_) => COMET,
-            AuraModes::Flash(_) => FLASH,
-            AuraModes::MultiStatic(_) => MULTISTATIC,
-            AuraModes::PerKey(_) => PER_KEY,
-            _ => panic!("Invalid mode"),
-        }
-    }
-}
-
-impl From<&AuraModes> for &str {
-    fn from(mode: &AuraModes) -> Self {
-        match mode {
-            AuraModes::Static(_) => "Static",
-            AuraModes::Breathe(_) => "Breathing",
-            AuraModes::Strobe(_) => "Strobing",
-            AuraModes::Rainbow(_) => "Rainbow",
-            AuraModes::Star(_) => "Stars",
-            AuraModes::Rain(_) => "Rain",
-            AuraModes::Highlight(_) => "Keypress Highlight",
-            AuraModes::Laser(_) => "Keypress Laser",
-            AuraModes::Ripple(_) => "Keypress Ripple",
-            AuraModes::Pulse(_) => "Pulse",
-            AuraModes::Comet(_) => "Comet",
-            AuraModes::Flash(_) => "Flash",
-            AuraModes::MultiStatic(_) => "4-Zone Static Colours",
-            AuraModes::PerKey(_) => "RGB per-key",
-            _ => panic!("Invalid mode"),
-        }
-    }
-}
-
-/// Exists to convert back from correct bytes. PER_KEY byte intentionally left off as it
-/// does not correspond to an actual pre-set mode, nor does brightness.
-impl From<u8> for AuraModes {
-    fn from(byte: u8) -> Self {
-        match byte {
-            STATIC => AuraModes::Static(SingleColour::default()),
-            BREATHING => AuraModes::Breathe(TwoColourSpeed::default()),
-            STROBE => AuraModes::Strobe(SingleSpeed::default()),
-            RAINBOW => AuraModes::Rainbow(SingleSpeedDirection::default()),
-            STAR => AuraModes::Star(TwoColourSpeed::default()),
-            RAIN => AuraModes::Rain(SingleSpeed::default()),
-            HIGHLIGHT => AuraModes::Highlight(SingleColourSpeed::default()),
-            LASER => AuraModes::Laser(SingleColourSpeed::default()),
-            RIPPLE => AuraModes::Ripple(SingleColourSpeed::default()),
-            PULSE => AuraModes::Pulse(SingleColour::default()),
-            COMET => AuraModes::Comet(SingleColour::default()),
-            FLASH => AuraModes::Flash(SingleColour::default()),
-            MULTISTATIC => AuraModes::MultiStatic(MultiColour::default()),
-            PER_KEY => AuraModes::PerKey(vec![]),
-            _ => panic!("Invalid mode byte"),
-        }
-    }
-}

asus-nb/src/cli_options.rs

@@ -1,287 +0,0 @@
-use crate::error::AuraError;
-use gumdrop::Options;
-use serde_derive::{Deserialize, Serialize};
-use std::str::FromStr;
-
-#[derive(Options)]
-pub struct LedBrightness {
-    level: Option<u8>,
-}
-impl LedBrightness {
-    pub fn new(level: Option<u8>) -> Self {
-        LedBrightness { level }
-    }
-
-    pub fn level(&self) -> Option<u8> {
-        self.level
-    }
-}
-impl FromStr for LedBrightness {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "off" => Ok(LedBrightness { level: Some(0x00) }),
-            "low" => Ok(LedBrightness { level: Some(0x01) }),
-            "med" => Ok(LedBrightness { level: Some(0x02) }),
-            "high" => Ok(LedBrightness { level: Some(0x03) }),
-            _ => {
-                print!(
-                    "{}\n{}\n",
-                    "Invalid argument, must be one of:", "off, low, med, high"
-                );
-                Err(AuraError::ParseBrightness)
-            }
-        }
-    }
-}
-impl ToString for LedBrightness {
-    fn to_string(&self) -> String {
-        let s = match self.level {
-            Some(0x00) => "low",
-            Some(0x01) => "med",
-            Some(0x02) => "high",
-            _ => "unknown",
-        };
-        s.to_string()
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub struct Colour(pub u8, pub u8, pub u8);
-impl Default for Colour {
-    fn default() -> Self {
-        Colour(255, 0, 0)
-    }
-}
-impl FromStr for Colour {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        if s.len() < 6 {
-            return Err(AuraError::ParseColour);
-        }
-        let r = u8::from_str_radix(&s[0..2], 16).or(Err(AuraError::ParseColour))?;
-        let g = u8::from_str_radix(&s[2..4], 16).or(Err(AuraError::ParseColour))?;
-        let b = u8::from_str_radix(&s[4..6], 16).or(Err(AuraError::ParseColour))?;
-        Ok(Colour(r, g, b))
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub enum Speed {
-    Low = 0xe1,
-    Med = 0xeb,
-    High = 0xf5,
-}
-impl Default for Speed {
-    fn default() -> Self {
-        Speed::Med
-    }
-}
-impl FromStr for Speed {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "low" => Ok(Speed::Low),
-            "med" => Ok(Speed::Med),
-            "high" => Ok(Speed::High),
-            _ => Err(AuraError::ParseSpeed),
-        }
-    }
-}
-
-/// Used for Rainbow mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Deserialize, Serialize)]
-pub enum Direction {
-    Right,
-    Left,
-    Up,
-    Down,
-}
-impl Default for Direction {
-    fn default() -> Self {
-        Direction::Right
-    }
-}
-impl FromStr for Direction {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "right" => Ok(Direction::Right),
-            "up" => Ok(Direction::Up),
-            "down" => Ok(Direction::Down),
-            "left" => Ok(Direction::Left),
-            _ => Err(AuraError::ParseDirection),
-        }
-    }
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct TwoColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the first RGB value e.g, ff00ff")]
-    pub colour: Colour,
-    #[options(no_long, meta = "HEX", help = "set the second RGB value e.g, ff00ff")]
-    pub colour2: Colour,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "WORD", help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleColour {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour: Colour,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct MultiColour {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour1: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour2: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour3: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour4: Colour,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleSpeedDirection {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(
-        no_long,
-        meta = "DIR",
-        help = "set the direction: up, down, left, right"
-    )]
-    pub direction: Direction,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour: Colour,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-/// Byte value for setting the built-in mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Options, Deserialize, Serialize)]
-pub enum SetAuraBuiltin {
-    #[options(help = "set a single static colour")]
-    Static(SingleColour),
-    #[options(help = "pulse between one or two colours")]
-    Breathe(TwoColourSpeed),
-    #[options(help = "strobe through all colours")]
-    Strobe(SingleSpeed),
-    #[options(help = "rainbow cycling in one of four directions")]
-    Rainbow(SingleSpeedDirection),
-    #[options(help = "rain pattern mimicking raindrops")]
-    Star(TwoColourSpeed),
-    #[options(help = "rain pattern of three preset colours")]
-    Rain(SingleSpeed),
-    #[options(help = "pressed keys are highlighted to fade")]
-    Highlight(SingleColourSpeed),
-    #[options(help = "pressed keys generate horizontal laser")]
-    Laser(SingleColourSpeed),
-    #[options(help = "pressed keys ripple outwards like a splash")]
-    Ripple(SingleColourSpeed),
-    #[options(help = "set a rapid pulse")]
-    Pulse(SingleColour),
-    #[options(help = "set a vertical line zooming from left")]
-    Comet(SingleColour),
-    #[options(help = "set a wide vertical line zooming from left")]
-    Flash(SingleColour),
-    #[options(help = "4-zone multi-colour")]
-    MultiStatic(MultiColour),
-}
-
-impl Default for SetAuraBuiltin {
-    fn default() -> Self {
-        SetAuraBuiltin::Static(SingleColour {
-            help: false,
-            colour: Colour(255, 0, 0),
-        })
-    }
-}
-
-#[derive(Copy, Clone, Debug)]
-pub enum AniMeStatusValue {
-    On,
-    Off,
-}
-impl FromStr for AniMeStatusValue {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "on" => Ok(AniMeStatusValue::On),
-            "off" => Ok(AniMeStatusValue::Off),
-            _ => {
-                print!("{}\n{}\n", "Invalid argument, must be one of:", "on, off");
-                Err(AuraError::ParseAnime)
-            }
-        }
-    }
-}
-impl From<AniMeStatusValue> for bool {
-    fn from(value: AniMeStatusValue) -> Self {
-        match value {
-            AniMeStatusValue::On => true,
-            AniMeStatusValue::Off => false,
-        }
-    }
-}
-
-#[derive(Options)]
-pub struct AniMeLeds {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(
-        no_long,
-        required,
-        short = "b",
-        meta = "BYTE",
-        help = "set all leds brightness value"
-    )]
-    led_brightness: u8,
-}
-impl AniMeLeds {
-    pub fn led_brightness(&self) -> u8 {
-        self.led_brightness
-    }
-}
-
-#[derive(Options)]
-pub enum AniMeActions {
-    #[options(help = "change all leds brightness")]
-    Leds(AniMeLeds),
-}

asus-nb/src/core_dbus.rs

@@ -1,418 +0,0 @@
-use super::*;
-use crate::cli_options::LedBrightness;
-use crate::fancy::KeyColourArray;
-use crate::profile::ProfileEvent;
-use dbus::{blocking::Connection, Message};
-use std::error::Error;
-use std::sync::{
-    atomic::{AtomicBool, Ordering},
-    Arc, Mutex,
-};
-use std::{thread, time::Duration};
-
-use crate::dbus_charge::{
-    OrgAsuslinuxDaemon as OrgAsuslinuxDaemonCharge, OrgAsuslinuxDaemonNotifyCharge,
-};
-use crate::dbus_gfx::{
-    OrgAsuslinuxDaemon as OrgAsuslinuxDaemonGfx, OrgAsuslinuxDaemonNotifyAction,
-    OrgAsuslinuxDaemonNotifyGfx,
-};
-use crate::dbus_ledmode::{
-    OrgAsuslinuxDaemon as OrgAsuslinuxDaemonLed, OrgAsuslinuxDaemonNotifyLed,
-};
-use crate::dbus_profile::{
-    OrgAsuslinuxDaemon as OrgAsuslinuxDaemonProfile, OrgAsuslinuxDaemonNotifyProfile,
-};
-use crate::dbus_rogbios::OrgAsuslinuxDaemon as OrgAsuslinuxDaemonRogBios;
-use crate::dbus_supported::OrgAsuslinuxDaemon as OrgAsuslinuxDaemonSupported;
-
-// Signals separated out
-pub struct CtrlSignals {
-    pub gfx_vendor_signal: Arc<Mutex<Option<String>>>,
-    pub gfx_action_signal: Arc<Mutex<Option<String>>>,
-    pub profile_signal: Arc<Mutex<Option<String>>>,
-    pub ledmode_signal: Arc<Mutex<Option<AuraModes>>>,
-    pub charge_signal: Arc<Mutex<Option<u8>>>,
-}
-
-impl CtrlSignals {
-    #[inline]
-    pub fn new(connection: &Connection) -> Result<Self, Box<dyn Error>> {
-        let proxy = connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Gfx",
-            Duration::from_secs(2),
-        );
-
-        let gfx_vendor_signal = Arc::new(Mutex::new(None));
-        let gfx_res1 = gfx_vendor_signal.clone();
-
-        let _x = proxy.match_signal(
-            move |sig: OrgAsuslinuxDaemonNotifyGfx, _: &Connection, _: &Message| {
-                if let Ok(mut lock) = gfx_res1.lock() {
-                    *lock = Some(sig.vendor);
-                }
-                true
-            },
-        )?;
-
-        let gfx_action_signal = Arc::new(Mutex::new(None));
-        let gfx_res1 = gfx_action_signal.clone();
-
-        let _x = proxy.match_signal(
-            move |sig: OrgAsuslinuxDaemonNotifyAction, _: &Connection, _: &Message| {
-                if let Ok(mut lock) = gfx_res1.lock() {
-                    *lock = Some(sig.action);
-                }
-                true
-            },
-        )?;
-
-        //
-        let proxy = connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Profile",
-            Duration::from_secs(2),
-        );
-
-        let profile_signal = Arc::new(Mutex::new(None));
-        let prof_res1 = profile_signal.clone();
-
-        let _x = proxy.match_signal(
-            move |sig: OrgAsuslinuxDaemonNotifyProfile, _: &Connection, _: &Message| {
-                if let Ok(mut lock) = prof_res1.lock() {
-                    *lock = Some(sig.profile);
-                }
-                true
-            },
-        )?;
-
-        //
-        let proxy = connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Led",
-            Duration::from_secs(2),
-        );
-
-        let ledmode_signal = Arc::new(Mutex::new(None));
-        let led_res1 = ledmode_signal.clone();
-
-        let _x = proxy.match_signal(
-            move |sig: OrgAsuslinuxDaemonNotifyLed, _: &Connection, _: &Message| {
-                if let Ok(mut lock) = led_res1.lock() {
-                    if let Ok(dat) = serde_json::from_str(&sig.data) {
-                        *lock = Some(dat);
-                    }
-                }
-                true
-            },
-        )?;
-
-        //
-        let proxy = connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Charge",
-            Duration::from_secs(2),
-        );
-
-        let charge_signal = Arc::new(Mutex::new(None));
-        let charge_res1 = charge_signal.clone();
-
-        let _x = proxy.match_signal(
-            move |sig: OrgAsuslinuxDaemonNotifyCharge, _: &Connection, _: &Message| {
-                if let Ok(mut lock) = charge_res1.lock() {
-                    *lock = Some(sig.limit);
-                }
-                true
-            },
-        )?;
-
-        Ok(CtrlSignals {
-            gfx_vendor_signal,
-            gfx_action_signal,
-            profile_signal,
-            ledmode_signal,
-            charge_signal,
-        })
-    }
-}
-
-/// Simplified way to write a effect block
-pub struct AuraDbusClient {
-    connection: Box<Connection>,
-    block_time: u64,
-    stop: Arc<AtomicBool>,
-    signals: CtrlSignals,
-}
-
-impl AuraDbusClient {
-    #[inline]
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let connection = Connection::new_system()?;
-
-        let stop = Arc::new(AtomicBool::new(false));
-        let match_rule = dbus::message::MatchRule::new_signal(DBUS_IFACE, "NotifyLed");
-        let stop1 = stop.clone();
-        connection.add_match(match_rule, move |_: (), _, msg| {
-            if msg.read1::<&str>().is_ok() {
-                stop1.clone().store(true, Ordering::Relaxed);
-            }
-            true
-        })?;
-
-        let signals = CtrlSignals::new(&connection)?;
-
-        Ok(AuraDbusClient {
-            connection: Box::new(connection),
-            block_time: 33333,
-            stop,
-            signals,
-        })
-    }
-
-    pub fn wait_gfx_changed(&self) -> Result<String, Box<dyn Error>> {
-        loop {
-            self.connection.process(Duration::from_millis(1))?;
-            if let Ok(lock) = self.signals.gfx_action_signal.lock() {
-                if let Some(stuff) = lock.as_ref() {
-                    return Ok(stuff.to_string());
-                }
-            }
-        }
-    }
-
-    /// This method must always be called before the very first write to initialise
-    /// the keyboard LED EC in the correct mode
-    #[inline]
-    pub fn init_effect(&self) -> Result<(), Box<dyn std::error::Error>> {
-        let mode = AuraModes::PerKey(vec![vec![]]);
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Led",
-            Duration::from_secs(2),
-        );
-        proxy.set_led_mode(&serde_json::to_string(&mode)?)?;
-        Ok(())
-    }
-
-    /// Write a single colour block.
-    ///
-    /// Intentionally blocks for 10ms after sending to allow the block to
-    /// be written to the keyboard EC. This should not be async.
-    #[inline]
-    pub fn write_colour_block(
-        &mut self,
-        key_colour_array: &KeyColourArray,
-    ) -> Result<(), Box<dyn Error>> {
-        let group = key_colour_array.get();
-        let mut vecs = Vec::with_capacity(group.len());
-        for v in group {
-            vecs.push(v.to_vec());
-        }
-        let mode = AuraModes::PerKey(vecs);
-
-        self.write_keyboard_leds(&mode)?;
-
-        thread::sleep(Duration::from_micros(self.block_time));
-        self.connection.process(Duration::from_micros(500))?;
-
-        if self.stop.load(Ordering::Relaxed) {
-            println!("Keyboard backlight was changed, exiting");
-            std::process::exit(1)
-        }
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_keyboard_leds(&self, mode: &AuraModes) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Led",
-            Duration::from_secs(2),
-        );
-        proxy.set_led_mode(&serde_json::to_string(mode)?)?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn next_keyboard_led_mode(&self) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Led",
-            Duration::from_secs(2),
-        );
-        proxy.next_led_mode()?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn prev_keyboard_led_mode(&self) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Led",
-            Duration::from_secs(2),
-        );
-        proxy.prev_led_mode()?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn get_gfx_pwr(&self) -> Result<String, Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Gfx",
-            Duration::from_secs(2),
-        );
-        let x = proxy.power()?;
-        Ok(x)
-    }
-
-    #[inline]
-    pub fn get_gfx_mode(&self) -> Result<String, Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Gfx",
-            Duration::from_secs(2),
-        );
-        let x = proxy.vendor()?;
-        Ok(x)
-    }
-
-    #[inline]
-    pub fn write_gfx_mode(&self, vendor: String) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Gfx",
-            Duration::from_secs(30),
-        );
-        proxy.set_vendor(&vendor)?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn next_fan_profile(&self) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Profile",
-            Duration::from_secs(2),
-        );
-        proxy.next_profile()?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_fan_mode(&self, level: u8) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Profile",
-            Duration::from_secs(2),
-        );
-        proxy.set_profile(&serde_json::to_string(&ProfileEvent::ChangeMode(level))?)?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_profile_command(
-        &self,
-        cmd: &ProfileEvent,
-    ) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Profile",
-            Duration::from_secs(2),
-        );
-        proxy.set_profile(&serde_json::to_string(cmd)?)?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_charge_limit(&self, level: u8) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Charge",
-            Duration::from_secs(2),
-        );
-        proxy.set_limit(level)?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_builtin_mode(&self, mode: &AuraModes) -> Result<(), Box<dyn std::error::Error>> {
-        self.write_keyboard_leds(mode)
-    }
-
-    #[inline]
-    pub fn get_led_brightness(&self) -> Result<LedBrightness, Box<dyn Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Led",
-            Duration::from_secs(2),
-        );
-        match proxy.led_brightness()? {
-            -1 => Ok(LedBrightness::new(None)),
-            level => Ok(LedBrightness::new(Some(level as u8))),
-        }
-    }
-
-    #[inline]
-    pub fn write_brightness(&self, level: u8) -> Result<(), Box<dyn std::error::Error>> {
-        self.write_keyboard_leds(&AuraModes::LedBrightness(level))?;
-        Ok(())
-    }
-
-    //
-    #[inline]
-    pub fn get_bios_dedicated_gfx(&self) -> Result<i16, Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/RogBios",
-            Duration::from_secs(2),
-        );
-        let x = proxy.dedicated_graphic_mode()?;
-        Ok(x)
-    }
-
-    #[inline]
-    pub fn set_bios_dedicated_gfx(&self, on: bool) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/RogBios",
-            Duration::from_secs(2),
-        );
-        proxy.set_dedicated_graphic_mode(<bool>::from(on))?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn get_bios_post_sound(&self) -> Result<i16, Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/RogBios",
-            Duration::from_secs(2),
-        );
-        let x = proxy.post_boot_sound()?;
-        Ok(x)
-    }
-
-    #[inline]
-    pub fn set_bios_post_sound(&self, on: bool) -> Result<(), Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/RogBios",
-            Duration::from_secs(2),
-        );
-        proxy.set_post_boot_sound(<bool>::from(on))?;
-        Ok(())
-    }
-
-    #[inline]
-    pub fn get_supported_functions(&self) -> Result<String, Box<dyn std::error::Error>> {
-        let proxy = self.connection.with_proxy(
-            "org.asuslinux.Daemon",
-            "/org/asuslinux/Supported",
-            Duration::from_secs(2),
-        );
-        let x = proxy.supported_functions()?;
-        Ok(x)
-    }
-}

asus-nb/src/dbus_anime.rs

@@ -1,27 +0,0 @@
-// This code was autogenerated with `dbus-codegen-rust -s -d org.asuslinux.Daemon -p /org/asuslinux/Anime -m None -f org.asuslinux.Daemon -c blocking`, see https://github.com/diwic/dbus-rs
-use dbus;
-#[allow(unused_imports)]
-use dbus::arg;
-use dbus::blocking;
-
-pub trait OrgAsuslinuxDaemon {
-    fn set_anime(&self, input: Vec<Vec<u8>>) -> Result<(), dbus::Error>;
-    fn set_on_off(&self, status: bool) -> Result<(), dbus::Error>;
-    fn set_boot_on_off(&self, status: bool) -> Result<(), dbus::Error>;
-}
-
-impl<'a, T: blocking::BlockingSender, C: ::std::ops::Deref<Target = T>> OrgAsuslinuxDaemon
-    for blocking::Proxy<'a, C>
-{
-    fn set_anime(&self, input: Vec<Vec<u8>>) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetAnime", (input,))
-    }
-
-    fn set_on_off(&self, status: bool) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetOnOff", (status,))
-    }
-
-    fn set_boot_on_off(&self, status: bool) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetBootOnOff", (status,))
-    }
-}

asus-nb/src/dbus_charge.rs

@@ -1,45 +0,0 @@
-// This code was autogenerated with `dbus-codegen-rust -s -d org.asuslinux.Daemon -f org.asuslinux.Daemon -c blocking -p /org/asuslinux/Charge -m None`, see https://github.com/diwic/dbus-rs
-use dbus;
-#[allow(unused_imports)]
-use dbus::arg;
-use dbus::blocking;
-
-pub trait OrgAsuslinuxDaemon {
-    fn set_limit(&self, limit: u8) -> Result<(), dbus::Error>;
-    fn limit(&self) -> Result<i16, dbus::Error>;
-}
-
-impl<'a, T: blocking::BlockingSender, C: ::std::ops::Deref<Target = T>> OrgAsuslinuxDaemon
-    for blocking::Proxy<'a, C>
-{
-    fn set_limit(&self, limit: u8) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetLimit", (limit,))
-    }
-
-    fn limit(&self) -> Result<i16, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "Limit", ())
-            .and_then(|r: (i16,)| Ok(r.0))
-    }
-}
-
-#[derive(Debug)]
-pub struct OrgAsuslinuxDaemonNotifyCharge {
-    pub limit: u8,
-}
-
-impl arg::AppendAll for OrgAsuslinuxDaemonNotifyCharge {
-    fn append(&self, i: &mut arg::IterAppend) {
-        arg::RefArg::append(&self.limit, i);
-    }
-}
-
-impl arg::ReadAll for OrgAsuslinuxDaemonNotifyCharge {
-    fn read(i: &mut arg::Iter) -> Result<Self, arg::TypeMismatchError> {
-        Ok(OrgAsuslinuxDaemonNotifyCharge { limit: i.read()? })
-    }
-}
-
-impl dbus::message::SignalArgs for OrgAsuslinuxDaemonNotifyCharge {
-    const NAME: &'static str = "NotifyCharge";
-    const INTERFACE: &'static str = "org.asuslinux.Daemon";
-}

asus-nb/src/dbus_gfx.rs

@@ -1,73 +0,0 @@
-// This code was autogenerated with `dbus-codegen-rust -s -d org.asuslinux.Daemon -p /org/asuslinux/Gfx -m None -f org.asuslinux.Daemon -c blocking`, see https://github.com/diwic/dbus-rs
-use dbus;
-#[allow(unused_imports)]
-use dbus::arg;
-use dbus::blocking;
-
-pub trait OrgAsuslinuxDaemon {
-    fn vendor(&self) -> Result<String, dbus::Error>;
-    fn power(&self) -> Result<String, dbus::Error>;
-    fn set_vendor(&self, vendor: &str) -> Result<(), dbus::Error>;
-}
-
-impl<'a, T: blocking::BlockingSender, C: ::std::ops::Deref<Target = T>> OrgAsuslinuxDaemon
-    for blocking::Proxy<'a, C>
-{
-    fn vendor(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "Vendor", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-
-    fn power(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "Power", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-
-    fn set_vendor(&self, vendor: &str) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetVendor", (vendor,))
-    }
-}
-
-#[derive(Debug)]
-pub struct OrgAsuslinuxDaemonNotifyGfx {
-    pub vendor: String,
-}
-
-impl arg::AppendAll for OrgAsuslinuxDaemonNotifyGfx {
-    fn append(&self, i: &mut arg::IterAppend) {
-        arg::RefArg::append(&self.vendor, i);
-    }
-}
-
-impl arg::ReadAll for OrgAsuslinuxDaemonNotifyGfx {
-    fn read(i: &mut arg::Iter) -> Result<Self, arg::TypeMismatchError> {
-        Ok(OrgAsuslinuxDaemonNotifyGfx { vendor: i.read()? })
-    }
-}
-
-impl dbus::message::SignalArgs for OrgAsuslinuxDaemonNotifyGfx {
-    const NAME: &'static str = "NotifyGfx";
-    const INTERFACE: &'static str = "org.asuslinux.Daemon";
-}
-
-#[derive(Debug)]
-pub struct OrgAsuslinuxDaemonNotifyAction {
-    pub action: String,
-}
-
-impl arg::AppendAll for OrgAsuslinuxDaemonNotifyAction {
-    fn append(&self, i: &mut arg::IterAppend) {
-        arg::RefArg::append(&self.action, i);
-    }
-}
-
-impl arg::ReadAll for OrgAsuslinuxDaemonNotifyAction {
-    fn read(i: &mut arg::Iter) -> Result<Self, arg::TypeMismatchError> {
-        Ok(OrgAsuslinuxDaemonNotifyAction { action: i.read()? })
-    }
-}
-
-impl dbus::message::SignalArgs for OrgAsuslinuxDaemonNotifyAction {
-    const NAME: &'static str = "NotifyAction";
-    const INTERFACE: &'static str = "org.asuslinux.Daemon";
-}

asus-nb/src/dbus_ledmode.rs

@@ -1,67 +0,0 @@
-// This code was autogenerated with `dbus-codegen-rust -s -d org.asuslinux.Daemon -f org.asuslinux.Daemon -c blocking -p /org/asuslinux/Led -m None`, see https://github.com/diwic/dbus-rs
-use dbus;
-#[allow(unused_imports)]
-use dbus::arg;
-use dbus::blocking;
-
-pub trait OrgAsuslinuxDaemon {
-    fn set_led_mode(&self, data: &str) -> Result<(), dbus::Error>;
-    fn next_led_mode(&self) -> Result<(), dbus::Error>;
-    fn prev_led_mode(&self) -> Result<(), dbus::Error>;
-    fn led_mode(&self) -> Result<String, dbus::Error>;
-    fn led_modes(&self) -> Result<String, dbus::Error>;
-    fn led_brightness(&self) -> Result<i16, dbus::Error>;
-}
-
-impl<'a, T: blocking::BlockingSender, C: ::std::ops::Deref<Target = T>> OrgAsuslinuxDaemon
-    for blocking::Proxy<'a, C>
-{
-    fn set_led_mode(&self, data: &str) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetLedMode", (data,))
-    }
-
-    fn next_led_mode(&self) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "NextLedMode", ())
-    }
-
-    fn prev_led_mode(&self) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "PrevLedMode", ())
-    }
-
-    fn led_mode(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "LedMode", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-
-    fn led_modes(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "LedModes", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-
-    fn led_brightness(&self) -> Result<i16, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "LedBrightness", ())
-            .and_then(|r: (i16,)| Ok(r.0))
-    }
-}
-
-#[derive(Debug)]
-pub struct OrgAsuslinuxDaemonNotifyLed {
-    pub data: String,
-}
-
-impl arg::AppendAll for OrgAsuslinuxDaemonNotifyLed {
-    fn append(&self, i: &mut arg::IterAppend) {
-        arg::RefArg::append(&self.data, i);
-    }
-}
-
-impl arg::ReadAll for OrgAsuslinuxDaemonNotifyLed {
-    fn read(i: &mut arg::Iter) -> Result<Self, arg::TypeMismatchError> {
-        Ok(OrgAsuslinuxDaemonNotifyLed { data: i.read()? })
-    }
-}
-
-impl dbus::message::SignalArgs for OrgAsuslinuxDaemonNotifyLed {
-    const NAME: &'static str = "NotifyLed";
-    const INTERFACE: &'static str = "org.asuslinux.Daemon";
-}

asus-nb/src/dbus_profile.rs

@@ -1,62 +0,0 @@
-// This code was autogenerated with `dbus-codegen-rust -s -d org.asuslinux.Daemon -p /org/asuslinux/Profile -m None -f org.asuslinux.Daemon -c blocking`, see https://github.com/diwic/dbus-rs
-use dbus;
-#[allow(unused_imports)]
-use dbus::arg;
-use dbus::blocking;
-
-pub trait OrgAsuslinuxDaemon {
-    fn set_profile(&self, profile: &str) -> Result<(), dbus::Error>;
-    fn next_profile(&self) -> Result<(), dbus::Error>;
-    fn active_profile_name(&self) -> Result<String, dbus::Error>;
-    fn profile(&self) -> Result<String, dbus::Error>;
-    fn profiles(&self) -> Result<String, dbus::Error>;
-}
-
-impl<'a, T: blocking::BlockingSender, C: ::std::ops::Deref<Target = T>> OrgAsuslinuxDaemon
-    for blocking::Proxy<'a, C>
-{
-    fn set_profile(&self, profile: &str) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetProfile", (profile,))
-    }
-
-    fn next_profile(&self) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "NextProfile", ())
-    }
-
-    fn active_profile_name(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "ActiveProfileName", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-
-    fn profile(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "Profile", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-
-    fn profiles(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "Profiles", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-}
-
-#[derive(Debug)]
-pub struct OrgAsuslinuxDaemonNotifyProfile {
-    pub profile: String,
-}
-
-impl arg::AppendAll for OrgAsuslinuxDaemonNotifyProfile {
-    fn append(&self, i: &mut arg::IterAppend) {
-        arg::RefArg::append(&self.profile, i);
-    }
-}
-
-impl arg::ReadAll for OrgAsuslinuxDaemonNotifyProfile {
-    fn read(i: &mut arg::Iter) -> Result<Self, arg::TypeMismatchError> {
-        Ok(OrgAsuslinuxDaemonNotifyProfile { profile: i.read()? })
-    }
-}
-
-impl dbus::message::SignalArgs for OrgAsuslinuxDaemonNotifyProfile {
-    const NAME: &'static str = "NotifyProfile";
-    const INTERFACE: &'static str = "org.asuslinux.Daemon";
-}

asus-nb/src/dbus_rogbios.rs

@@ -1,86 +0,0 @@
-// This code was autogenerated with `dbus-codegen-rust -s -d org.asuslinux.Daemon -f org.asuslinux.Daemon -c blocking -p /org/asuslinux/RogBios -m None -o asus-nb/src/dbus_rogbios.rs`, see https://github.com/diwic/dbus-rs
-use dbus;
-#[allow(unused_imports)]
-use dbus::arg;
-use dbus::blocking;
-
-pub trait OrgAsuslinuxDaemon {
-    fn set_dedicated_graphic_mode(&self, dedicated: bool) -> Result<(), dbus::Error>;
-    fn dedicated_graphic_mode(&self) -> Result<i16, dbus::Error>;
-    fn set_post_boot_sound(&self, on: bool) -> Result<(), dbus::Error>;
-    fn post_boot_sound(&self) -> Result<i16, dbus::Error>;
-}
-
-impl<'a, T: blocking::BlockingSender, C: ::std::ops::Deref<Target = T>> OrgAsuslinuxDaemon
-    for blocking::Proxy<'a, C>
-{
-    fn set_dedicated_graphic_mode(&self, dedicated: bool) -> Result<(), dbus::Error> {
-        self.method_call(
-            "org.asuslinux.Daemon",
-            "SetDedicatedGraphicMode",
-            (dedicated,),
-        )
-    }
-
-    fn dedicated_graphic_mode(&self) -> Result<i16, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "DedicatedGraphicMode", ())
-            .and_then(|r: (i16,)| Ok(r.0))
-    }
-
-    fn set_post_boot_sound(&self, on: bool) -> Result<(), dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SetPostBootSound", (on,))
-    }
-
-    fn post_boot_sound(&self) -> Result<i16, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "PostBootSound", ())
-            .and_then(|r: (i16,)| Ok(r.0))
-    }
-}
-
-#[derive(Debug)]
-pub struct OrgAsuslinuxDaemonNotifyDedicatedGraphicMode {
-    pub dedicated: bool,
-}
-
-impl arg::AppendAll for OrgAsuslinuxDaemonNotifyDedicatedGraphicMode {
-    fn append(&self, i: &mut arg::IterAppend) {
-        arg::RefArg::append(&self.dedicated, i);
-    }
-}
-
-impl arg::ReadAll for OrgAsuslinuxDaemonNotifyDedicatedGraphicMode {
-    fn read(i: &mut arg::Iter) -> Result<Self, arg::TypeMismatchError> {
-        Ok(OrgAsuslinuxDaemonNotifyDedicatedGraphicMode {
-            dedicated: i.read()?,
-        })
-    }
-}
-
-impl dbus::message::SignalArgs for OrgAsuslinuxDaemonNotifyDedicatedGraphicMode {
-    const NAME: &'static str = "NotifyDedicatedGraphicMode";
-    const INTERFACE: &'static str = "org.asuslinux.Daemon";
-}
-
-#[derive(Debug)]
-pub struct OrgAsuslinuxDaemonNotifyPostBootSound {
-    pub dedicated: bool,
-}
-
-impl arg::AppendAll for OrgAsuslinuxDaemonNotifyPostBootSound {
-    fn append(&self, i: &mut arg::IterAppend) {
-        arg::RefArg::append(&self.dedicated, i);
-    }
-}
-
-impl arg::ReadAll for OrgAsuslinuxDaemonNotifyPostBootSound {
-    fn read(i: &mut arg::Iter) -> Result<Self, arg::TypeMismatchError> {
-        Ok(OrgAsuslinuxDaemonNotifyPostBootSound {
-            dedicated: i.read()?,
-        })
-    }
-}
-
-impl dbus::message::SignalArgs for OrgAsuslinuxDaemonNotifyPostBootSound {
-    const NAME: &'static str = "NotifyPostBootSound";
-    const INTERFACE: &'static str = "org.asuslinux.Daemon";
-}

asus-nb/src/dbus_supported.rs

@@ -1,18 +0,0 @@
-// This code was autogenerated with `dbus-codegen-rust -s -d org.asuslinux.Daemon -f org.asuslinux.Daemon -c blocking -p /org/asuslinux/Supported -m None -o asus-nb/src/dbus_supported.rs`, see https://github.com/diwic/dbus-rs
-use dbus;
-#[allow(unused_imports)]
-use dbus::arg;
-use dbus::blocking;
-
-pub trait OrgAsuslinuxDaemon {
-    fn supported_functions(&self) -> Result<String, dbus::Error>;
-}
-
-impl<'a, T: blocking::BlockingSender, C: ::std::ops::Deref<Target = T>> OrgAsuslinuxDaemon
-    for blocking::Proxy<'a, C>
-{
-    fn supported_functions(&self) -> Result<String, dbus::Error> {
-        self.method_call("org.asuslinux.Daemon", "SupportedFunctions", ())
-            .and_then(|r: (String,)| Ok(r.0))
-    }
-}

asus-nb/src/error.rs

@@ -1,42 +0,0 @@
-use std::error::Error;
-use std::fmt;
-
-#[derive(Debug)]
-pub enum AuraError {
-    ParseColour,
-    ParseSpeed,
-    ParseDirection,
-    ParseBrightness,
-    ParseAnime,
-}
-
-impl fmt::Display for AuraError {
-    // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        match self {
-            AuraError::ParseColour => write!(f, "Could not parse colour"),
-            AuraError::ParseSpeed => write!(f, "Could not parse speed"),
-            AuraError::ParseDirection => write!(f, "Could not parse direction"),
-            AuraError::ParseBrightness => write!(f, "Could not parse brightness"),
-            AuraError::ParseAnime => write!(f, "Could not parse anime"),
-        }
-    }
-}
-
-impl Error for AuraError {}
-
-#[derive(Debug)]
-pub enum GraphicsError {
-    ParseVendor,
-}
-
-impl fmt::Display for GraphicsError {
-    // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        match self {
-            GraphicsError::ParseVendor => write!(f, "Could not parse vendor name"),
-        }
-    }
-}
-
-impl Error for GraphicsError {}

asus-nb/src/lib.rs

@@ -1,262 +0,0 @@
-pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
-pub static DBUS_PATH: &str = "/org/asuslinux/Daemon";
-pub static DBUS_IFACE: &str = "org.asuslinux.Daemon";
-pub const LED_MSG_LEN: usize = 17;
-
-pub mod aura_modes;
-use aura_modes::AuraModes;
-
-pub mod profile;
-
-/// Contains mostly only what is required for parsing CLI options
-pub mod cli_options;
-
-/// Enables you to create fancy RGB effects
-pub mod fancy;
-
-/// The main dbus group for system controls, e.g, fan control, keyboard LED's
-pub mod core_dbus;
-
-/// Specific dbus for writing to the AniMe Matrix display (if supported)
-pub mod anime_dbus;
-
-/// Helper functions for the AniMe display
-pub mod anime_matrix;
-
-pub mod error;
-
-pub mod dbus_anime;
-pub mod dbus_charge;
-pub mod dbus_gfx;
-pub mod dbus_ledmode;
-pub mod dbus_profile;
-pub mod dbus_rogbios;
-pub mod dbus_supported;
-
-// static LED_INIT1: [u8; 2] = [0x5d, 0xb9];
-// static LED_INIT2: &str = "]ASUS Tech.Inc."; // ] == 0x5d
-// static LED_INIT3: [u8; 6] = [0x5d, 0x05, 0x20, 0x31, 0, 0x08];
-// static LED_INIT4: &str = "^ASUS Tech.Inc."; // ^ == 0x5e
-// static LED_INIT5: [u8; 6] = [0x5e, 0x05, 0x20, 0x31, 0, 0x08];
-
-/// Writes aout the correct byte string for brightness
-///
-/// The HID descriptor looks like:
-///
-/// ```ignore
-/// 0x06, 0x31, 0xFF,  // Usage Page (Vendor Defined 0xFF31)
-/// 0x09, 0x76,        // Usage (0x76)
-/// 0xA1, 0x01,        // Collection (Application)
-/// 0x85, 0x5A,        //   Report ID (90)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x05,        //   Report Count (5)
-/// 0x81, 0x00,        //   Input (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x3F,        //   Report Count (63)
-/// 0xB1, 0x00,        //   Feature (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
-/// 0xC0,              // End Collection
-/// ```
-pub fn aura_brightness_bytes(brightness: u8) -> [u8; 17] {
-    // TODO: check brightness range
-    [
-        0x5A, 0xBA, 0xC5, 0xC4, brightness, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-    ]
-}
-
-/// Parses `AuraCommands` in to packet data
-///
-/// Byte structure:
-///
-/// ```ignore
-/// | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10| 11| 12|
-/// |---|---|---|---|---|---|---|---|---|---|---|---|---|
-/// |5d |b3 |00 |03 |ff |00 |00 |00 |00 |00 |00 |ff |00 |
-/// ```
-///
-/// Bytes 0 and 1 should always be 5d, b3
-///
-/// On multizone laptops byte 2 is the zone number, RGB in usual
-/// place, byte 3 set to zero
-///
-/// Byte 3 sets the mode type:
-/// - 00 = static
-/// - 01 = breathe (can set two colours)
-/// - 02 = strobe (through all colours)
-/// - 03 = rainbow
-/// - 04 = star (byte 9 sets rain colour)
-/// - 05 = rain keys, red, white, turquoise
-/// - 06 = pressed keys light up and fade
-/// - 07 = pressed key emits laser
-/// - 08 = pressed key emits water ripple
-/// - 09 = no effect/not used
-/// - 0a fast pulse (no speed setting)
-/// - 0b vertical line racing to right (no speed setting)
-/// - 0c wider vertical line racing to right (no speed setting)
-///
-/// Bytes 4, 5, 6 are Red, Green, Blue
-///
-/// Byte 7 sets speed from
-/// - 0x00 = Off
-/// - 0xe1 = Slow
-/// - 0xeb = Medium
-/// - 0xf5 = Fast
-///
-/// Byte 8 sets rainbow direction:
-/// - 0x00 = rightwards
-/// - 0x01 = leftwards
-/// - 0x02 = upwards
-/// - 0x03 = downwards
-///
-/// Bytes 10, 11, 12 are Red, Green, Blue for second colour if mode supports it
-///
-/// The HID descriptor looks like:
-/// ```ignore
-/// 0x06, 0x31, 0xFF,  // Usage Page (Vendor Defined 0xFF31)
-/// 0x09, 0x79,        // Usage (0x79)
-/// 0xA1, 0x01,        // Collection (Application)
-/// 0x85, 0x5D,        //   Report ID (93)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x1F,        //   Report Count (31)
-/// 0x81, 0x00,        //   Input (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x3F,        //   Report Count (63)
-/// 0x91, 0x00,        //   Output (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
-/// 0x19, 0x00,        //   Usage Minimum (0x00)
-/// 0x2A, 0xFF, 0x00,  //   Usage Maximum (0xFF)
-/// 0x15, 0x00,        //   Logical Minimum (0)
-/// 0x26, 0xFF, 0x00,  //   Logical Maximum (255)
-/// 0x75, 0x08,        //   Report Size (8)
-/// 0x95, 0x3F,        //   Report Count (63)
-/// 0xB1, 0x00,        //   Feature (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
-/// 0xC0,              // End Collection
-/// ```
-///
-/// This descriptor is also used for the per-key LED settings
-impl From<&AuraModes> for [u8; LED_MSG_LEN] {
-    fn from(mode: &AuraModes) -> Self {
-        let mut msg = [0u8; LED_MSG_LEN];
-        msg[0] = 0x5d;
-        msg[1] = 0xb3;
-        match mode {
-            AuraModes::LedBrightness(n) => return aura_brightness_bytes(*n),
-            AuraModes::Static(_) => msg[3] = 0x00,
-            AuraModes::Breathe(_) => msg[3] = 0x01,
-            AuraModes::Strobe(_) => msg[3] = 0x02,
-            AuraModes::Rainbow(_) => msg[3] = 0x03,
-            AuraModes::Star(_) => msg[3] = 0x04,
-            AuraModes::Rain(_) => msg[3] = 0x05,
-            AuraModes::Highlight(_) => msg[3] = 0x06,
-            AuraModes::Laser(_) => msg[3] = 0x07,
-            AuraModes::Ripple(_) => msg[3] = 0x08,
-            AuraModes::Pulse(_) => msg[3] = 0x0a,
-            AuraModes::Comet(_) => msg[3] = 0x0b,
-            AuraModes::Flash(_) => msg[3] = 0x0c,
-            _ => panic!("Mode not convertable to 1D array: {}", <&str>::from(mode)),
-        }
-
-        match mode {
-            AuraModes::Rainbow(settings) => {
-                msg[7] = settings.speed as u8;
-                msg[8] = settings.direction as u8;
-            }
-            AuraModes::Star(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-                msg[7] = settings.speed as u8;
-                msg[9] = settings.colour2.2;
-            }
-            AuraModes::Breathe(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-                msg[7] = settings.speed as u8;
-                msg[10] = settings.colour2.0;
-                msg[11] = settings.colour2.1;
-                msg[12] = settings.colour2.2;
-            }
-            AuraModes::Strobe(settings) | AuraModes::Rain(settings) => {
-                msg[7] = settings.speed as u8;
-            }
-            AuraModes::Highlight(settings)
-            | AuraModes::Laser(settings)
-            | AuraModes::Ripple(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-                msg[7] = settings.speed as u8;
-            }
-            AuraModes::Static(settings)
-            | AuraModes::Pulse(settings)
-            | AuraModes::Comet(settings)
-            | AuraModes::Flash(settings) => {
-                msg[4] = settings.colour.0;
-                msg[5] = settings.colour.1;
-                msg[6] = settings.colour.2;
-            }
-            _ => panic!("Mode not convertable to 1D array: {}", <&str>::from(mode)),
-        }
-        msg
-    }
-}
-
-impl From<AuraModes> for [u8; LED_MSG_LEN] {
-    #[inline]
-    fn from(mode: AuraModes) -> Self {
-        <[u8; LED_MSG_LEN]>::from(&mode)
-    }
-}
-
-impl From<AuraModes> for [[u8; LED_MSG_LEN]; 4] {
-    #[inline]
-    fn from(mode: AuraModes) -> Self {
-        <[[u8; LED_MSG_LEN]; 4]>::from(&mode)
-    }
-}
-
-impl From<&AuraModes> for [[u8; LED_MSG_LEN]; 4] {
-    #[inline]
-    fn from(mode: &AuraModes) -> Self {
-        let mut msg = [[0u8; LED_MSG_LEN]; 4];
-        for (i, row) in msg.iter_mut().enumerate() {
-            row[0] = 0x5d;
-            row[1] = 0xb3;
-            row[2] = i as u8 + 1;
-        }
-
-        match mode {
-            AuraModes::MultiStatic(settings) => {
-                msg[0][4] = settings.colour1.0;
-                msg[0][5] = settings.colour1.1;
-                msg[0][6] = settings.colour1.2;
-                msg[1][4] = settings.colour2.0;
-                msg[1][5] = settings.colour2.1;
-                msg[1][6] = settings.colour2.2;
-                msg[2][4] = settings.colour3.0;
-                msg[2][5] = settings.colour3.1;
-                msg[2][6] = settings.colour3.2;
-                msg[3][4] = settings.colour4.0;
-                msg[3][5] = settings.colour4.1;
-                msg[3][6] = settings.colour4.2;
-            }
-            _ => panic!("Mode not convertable to 2D array: {}", <&str>::from(mode)),
-        }
-        msg
-    }
-}

asus-nb/src/profile.rs

@@ -1,97 +0,0 @@
-use gumdrop::Options;
-use rog_fan_curve::{Curve, Fan};
-use serde_derive::{Deserialize, Serialize};
-use std::str::FromStr;
-
-#[derive(Debug, Serialize, Deserialize)]
-pub enum ProfileEvent {
-    Cli(ProfileCommand),
-    ChangeMode(u8),
-    Toggle,
-}
-
-#[derive(Debug, Clone, Serialize, Deserialize)]
-pub enum FanLevel {
-    Normal,
-    Boost,
-    Silent,
-}
-
-impl FromStr for FanLevel {
-    type Err = &'static str;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        match s.to_lowercase().as_str() {
-            "normal" => Ok(FanLevel::Normal),
-            "boost" => Ok(FanLevel::Boost),
-            "silent" => Ok(FanLevel::Silent),
-            _ => Err("Invalid fan level"),
-        }
-    }
-}
-
-impl From<u8> for FanLevel {
-    fn from(n: u8) -> Self {
-        match n {
-            0 => FanLevel::Normal,
-            1 => FanLevel::Boost,
-            2 => FanLevel::Silent,
-            _ => FanLevel::Normal,
-        }
-    }
-}
-
-impl From<FanLevel> for u8 {
-    fn from(n: FanLevel) -> Self {
-        match n {
-            FanLevel::Normal => 0,
-            FanLevel::Boost => 1,
-            FanLevel::Silent => 2,
-        }
-    }
-}
-
-impl From<&FanLevel> for u8 {
-    fn from(n: &FanLevel) -> Self {
-        match n {
-            FanLevel::Normal => 0,
-            FanLevel::Boost => 1,
-            FanLevel::Silent => 2,
-        }
-    }
-}
-
-fn parse_fan_curve(data: &str) -> Result<Curve, String> {
-    let curve = Curve::from_config_str(data)?;
-    if let Err(err) = curve.check_safety(Fan::Cpu) {
-        return Err(format!("Unsafe curve {:?}", err));
-    }
-    if let Err(err) = curve.check_safety(Fan::Gpu) {
-        return Err(format!("Unsafe curve {:?}", err));
-    }
-    Ok(curve)
-}
-
-#[derive(Debug, Clone, Options, Serialize, Deserialize)]
-pub struct ProfileCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(help = "toggle to next profile in list")]
-    pub next: bool,
-    #[options(help = "create the profile if it doesn't exist")]
-    pub create: bool,
-
-    #[options(help = "enable or disable cpu turbo")]
-    pub turbo: Option<bool>,
-    #[options(help = "set min cpu scaling (intel)")]
-    pub min_percentage: Option<u8>,
-    #[options(help = "set max cpu scaling (intel)")]
-    pub max_percentage: Option<u8>,
-
-    #[options(meta = "PWR", help = "<silent, normal, boost>")]
-    pub preset: Option<FanLevel>,
-    #[options(parse(try_from_str = "parse_fan_curve"), help = "set fan curve")]
-    pub curve: Option<Curve>,
-    #[options(free)]
-    pub profile: Option<String>,
-}

asus-notify/Cargo.toml

@@ -1,21 +1,22 @@
 [package]
 name = "asus-notify"
-version = "2.0.4"
+version = "3.1.0"
 authors = ["Luke D Jones <luke@ljones.dev>"]
 edition = "2018"
 
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
 
 [dependencies]
+zbus = "^2.2"
 # serialisation
-serde = "^1.0"
-serde_derive = "^1.0"
 serde_json = "^1.0"
-dbus = { version = "^0.8" }
-asus-nb = { path = "../asus-nb" }
-asus-nb-ctrl = { path = "../asus-nb-ctrl" }
+rog_dbus = { path = "../rog-dbus" }
+rog_aura = { path = "../rog-aura" }
+rog_supported = { path = "../rog-supported" }
+rog_profiles = { path = "../rog-profiles" }
+smol = "^1.2"
 
 [dependencies.notify-rust]
-version = "^4.0.0"
+version = "^4.3"
 default-features = false
-features = ["z"]
+features = ["z"]

asus-notify/src/main.rs

@@ -1,92 +1,145 @@
-use asus_nb::core_dbus::CtrlSignals;
-use daemon::config::{Config, Profile};
-use dbus::blocking::Connection;
 use notify_rust::{Hint, Notification, NotificationHandle};
-use std::error::Error;
-use std::time::Duration;
+use rog_aura::AuraEffect;
+use rog_dbus::{
+    zbus_charge::ChargeProxy, zbus_led::LedProxy, zbus_profile::ProfileProxy,
+    zbus_rogbios::RogBiosProxy,
+};
+use rog_profiles::Profile;
+use smol::{future, Executor};
+use std::{
+    error::Error,
+    sync::{Arc, Mutex},
+};
+use zbus::export::futures_util::StreamExt;
+
+const NOTIF_HEADER: &str = "ROG Control";
+
+macro_rules! notify {
+    ($notifier:ident, $last_notif:ident, $data:expr) => {
+        if let Some(notif) = $last_notif.take() {
+            notif.close();
+        }
+        if let Ok(x) = $notifier($data) {
+            $last_notif.replace(x);
+        }
+    };
+}
+
+macro_rules! base_notification {
+    ($body:expr) => {
+        Notification::new()
+            .summary(NOTIF_HEADER)
+            .body($body)
+            .timeout(2000)
+            .show()
+    };
+}
+
+type SharedHandle = Arc<Mutex<Option<NotificationHandle>>>;
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
-    println!("Version {}", env!("CARGO_PKG_VERSION"));
+    println!("asus-notify version {}", env!("CARGO_PKG_VERSION"));
+    println!("   rog-dbus version {}", rog_dbus::VERSION);
 
-    let mut cfg = Config::read_new()?;
-    let mut last_profile = String::new();
+    let last_notification: SharedHandle = Arc::new(Mutex::new(None));
 
-    let connection = Connection::new_system()?;
-    let signals = CtrlSignals::new(&connection)?;
+    let executor = Executor::new();
+    // BIOS notif
+    let x = last_notification.clone();
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = RogBiosProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_post_boot_sound().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = x.try_lock() {
+                            notify!(do_post_sound_notif, lock, &out.sound());
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
 
-    let mut last_profile_notif: Option<NotificationHandle> = None;
-    let mut last_led_notif: Option<NotificationHandle> = None;
-    let mut last_gfx_notif: Option<NotificationHandle> = None;
-    let mut last_chrg_notif: Option<NotificationHandle> = None;
+    // Charge notif
+    let x = last_notification.clone();
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = ChargeProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_charge().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = x.try_lock() {
+                            notify!(do_charge_notif, lock, &out.limit);
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
+
+    // Profile notif
+    let x = last_notification.clone();
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = ProfileProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_profile().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = x.try_lock() {
+                            notify!(do_thermal_notif, lock, &out.profile);
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
+
+    // LED notif
+    executor
+        .spawn(async move {
+            let conn = zbus::Connection::system().await.unwrap();
+            let proxy = LedProxy::new(&conn).await.unwrap();
+            if let Ok(p) = proxy.receive_notify_led().await {
+                p.for_each(|e| {
+                    if let Ok(out) = e.args() {
+                        if let Ok(ref mut lock) = last_notification.try_lock() {
+                            notify!(do_led_notif, lock, &out.data);
+                        }
+                    }
+                    future::ready(())
+                })
+                .await;
+            };
+        })
+        .detach();
 
     loop {
-        std::thread::sleep(Duration::from_millis(100));
-        connection.process(std::time::Duration::from_millis(200))?;
-
-        if let Ok(mut lock) = signals.gfx_vendor_signal.lock() {
-            if let Some(vendor) = lock.take() {
-                if let Some(notif) = last_gfx_notif.take() {
-                    notif.close();
-                }
-                let x = do_notif(&format!("Graphics mode changed to {}", vendor))?;
-                last_gfx_notif = Some(x);
-            }
-        }
-
-        if let Ok(mut lock) = signals.charge_signal.lock() {
-            if let Some(limit) = lock.take() {
-                if let Some(notif) = last_chrg_notif.take() {
-                    notif.close();
-                }
-                let x = do_notif(&format!("Battery charge limit changed to {}", limit))?;
-                last_led_notif = Some(x);
-            }
-        }
-
-        if let Ok(mut lock) = signals.ledmode_signal.lock() {
-            if let Some(ledmode) = lock.take() {
-                if let Some(notif) = last_led_notif.take() {
-                    notif.close();
-                }
-                let x = do_notif(&format!(
-                    "Keyboard LED mode changed to {}",
-                    <&str>::from(&ledmode)
-                ))?;
-                last_led_notif = Some(x);
-            }
-        }
-
-        // We need to do the config read because of a limitation preventing
-        // easy dbus notification from the profile controller
-        cfg.read();
-        if last_profile != cfg.active_profile {
-            if let Some(notif) = last_profile_notif.take() {
-                notif.close();
-            }
-            if let Some(profile) = cfg.power_profiles.get(&cfg.active_profile) {
-                let x = do_thermal_notif(&profile, &cfg.active_profile)?;
-                last_profile_notif = Some(x);
-                last_profile = cfg.active_profile.clone();
-            }
-        }
+        smol::block_on(executor.tick());
     }
 }
 
-fn do_thermal_notif(profile: &Profile, label: &str) -> Result<NotificationHandle, Box<dyn Error>> {
-    let fan = profile.fan_preset;
-    let turbo = if profile.turbo { "enabled" } else { "disabled" };
-    let icon = match fan {
-        0 => "asus_notif_yellow",
-        1 => "asus_notif_red",
-        2 => "asus_notif_green",
-        _ => "asus_notif_red",
+fn do_thermal_notif(profile: &Profile) -> Result<NotificationHandle, Box<dyn Error>> {
+    let icon = match profile {
+        Profile::Balanced => "asus_notif_yellow",
+        Profile::Performance => "asus_notif_red",
+        Profile::Quiet => "asus_notif_green",
     };
+    let profile: &str = (*profile).into();
     let x = Notification::new()
         .summary("ASUS ROG")
         .body(&format!(
-            "Thermal profile changed to {}, turbo {}",
-            label.to_uppercase(),
-            turbo
+            "Thermal profile changed to {}",
+            profile.to_uppercase(),
         ))
         .hint(Hint::Resident(true))
         .timeout(2000)
@@ -97,11 +150,17 @@ fn do_thermal_notif(profile: &Profile, label: &str) -> Result<NotificationHandle
     Ok(x)
 }
 
-fn do_notif(body: &str) -> Result<NotificationHandle, Box<dyn Error>> {
-    let x = Notification::new()
-        .summary("ASUS ROG")
-        .body(body)
-        .timeout(2000)
-        .show()?;
-    Ok(x)
+fn do_led_notif(ledmode: &AuraEffect) -> Result<NotificationHandle, notify_rust::error::Error> {
+    base_notification!(&format!(
+        "Keyboard LED mode changed to {}",
+        ledmode.mode_name()
+    ))
+}
+
+fn do_charge_notif(limit: &u8) -> Result<NotificationHandle, notify_rust::error::Error> {
+    base_notification!(&format!("Battery charge limit changed to {}", limit))
+}
+
+fn do_post_sound_notif(on: &bool) -> Result<NotificationHandle, notify_rust::error::Error> {
+    base_notification!(&format!("BIOS Post sound {}", on))
 }

asusctl/Cargo.toml

@@ -0,0 +1,26 @@
+[package]
+name = "asusctl"
+version = "4.0.7"
+authors = ["Luke D Jones <luke@ljones.dev>"]
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+zbus = "^2.2"
+rog_anime = { path = "../rog-anime" }
+rog_aura = { path = "../rog-aura" }
+rog_dbus = { path = "../rog-dbus" }
+rog_profiles = { path = "../rog-profiles" }
+rog_supported = { path = "../rog-supported" }
+daemon = { path = "../daemon" }
+gumdrop = "^0.8"
+toml = "^0.5.8"
+
+sysfs-class = "^0.1.2"
+
+[dev-dependencies]
+tinybmp = "^0.3.3"
+glam = "0.20.5"
+rog_dbus = { path = "../rog-dbus" }
+gif = "^0.11.2"

asusctl/examples/anime-diag-png.rs

@@ -0,0 +1,32 @@
+use std::{env, error::Error, path::Path, process::exit};
+
+use rog_anime::{usb::get_anime_type, AnimeDiagonal, AnimeType};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn Error>> {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 3 {
+        println!("Usage: <filepath> <brightness>");
+        println!("e.g, asusctl/examples/doom_large.png 0.8");
+        exit(-1);
+    }
+
+    let matrix = AnimeDiagonal::from_png(
+        Path::new(&args[1]),
+        None,
+        args[2].parse::<f32>().unwrap(),
+        AnimeType::GA401,
+    )?;
+
+    let anime_type = get_anime_type()?;
+
+    client
+        .proxies()
+        .anime()
+        .write(matrix.into_data_buffer(anime_type))
+        .unwrap();
+
+    Ok(())
+}

asusctl/examples/anime-diag.rs

@@ -0,0 +1,36 @@
+use std::{thread::sleep, time::Duration};
+
+use rog_anime::{usb::get_anime_type, AnimeDiagonal, AnimeType};
+use rog_dbus::RogDbusClientBlocking;
+
+// In usable data:
+// Top row start at 1, ends at 32
+
+// 74w x 36h diagonal used by the windows app
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    for step in (2..50).rev() {
+        let mut matrix = AnimeDiagonal::new(AnimeType::GA401, None);
+        for c in (0..60).into_iter().step_by(step) {
+            for i in matrix.get_mut().iter_mut() {
+                i[c] = 50;
+            }
+        }
+
+        for c in (0..35).into_iter().step_by(step) {
+            for i in matrix.get_mut()[c].iter_mut() {
+                *i = 50;
+            }
+        }
+
+        let anime_type = get_anime_type().unwrap();
+        client
+            .proxies()
+            .anime()
+            .write(matrix.into_data_buffer(anime_type))
+            .unwrap();
+        sleep(Duration::from_millis(300));
+    }
+}

asusctl/examples/anime-gif.rs

@@ -0,0 +1,43 @@
+use std::{env, path::Path, thread::sleep};
+
+use rog_anime::{usb::get_anime_type, ActionData, ActionLoader, Sequences};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 3 {
+        println!("Please supply filepath and brightness");
+        return;
+    }
+
+    let path = Path::new(&args[1]);
+    let brightness = args[2].parse::<f32>().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut seq = Sequences::new(anime_type);
+    seq.insert(
+        0,
+        &ActionLoader::AsusAnimation {
+            file: path.into(),
+            time: rog_anime::AnimTime::Infinite,
+            brightness,
+        },
+    )
+    .unwrap();
+
+    loop {
+        for action in seq.iter() {
+            if let ActionData::Animation(frames) = action {
+                for frame in frames.frames() {
+                    client
+                        .proxies()
+                        .anime()
+                        .write(frame.frame().clone())
+                        .unwrap();
+                    sleep(frame.delay());
+                }
+            }
+        }
+    }
+}

asusctl/examples/anime-grid.rs

@@ -0,0 +1,45 @@
+use rog_anime::{usb::get_anime_type, AnimeDataBuffer, AnimeGrid};
+use rog_dbus::RogDbusClientBlocking;
+
+// In usable data:
+// Top row start at 1, ends at 32
+
+// 74w x 36h diagonal used by the windows app
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut matrix = AnimeGrid::new(anime_type);
+    let tmp = matrix.get_mut();
+
+    let mut i = 0;
+    for (y, row) in tmp.iter_mut().enumerate() {
+        if y % 2 == 0 && i + 1 != row.len() - 1 {
+            i += 1;
+            dbg!(i);
+        }
+        row[row.len() - i] = 0x22;
+        if i > 5 {
+            row[row.len() - i + 5] = 0x22;
+        }
+        if i > 10 {
+            row[row.len() - i + 10] = 0x22;
+        }
+
+        if i > 15 {
+            row[row.len() - i + 15] = 0x22;
+        }
+
+        if i > 20 {
+            row[row.len() - i + 20] = 0x22;
+        }
+
+        if i > 25 {
+            row[row.len() - i + 25] = 0x22;
+        }
+    }
+
+    let matrix = <AnimeDataBuffer>::from(matrix);
+
+    client.proxies().anime().write(matrix).unwrap();
+}

asusctl/examples/anime-outline.rs

@@ -0,0 +1,130 @@
+use rog_anime::{usb::get_anime_type, AnimeDataBuffer};
+use rog_dbus::RogDbusClientBlocking;
+
+// In usable data:
+// Top row start at 1, ends at 32
+
+fn main() {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+    let anime_type = get_anime_type().unwrap();
+    let mut matrix = AnimeDataBuffer::new(anime_type);
+    matrix.data_mut()[1] = 100; // start = 1
+    for n in matrix.data_mut()[2..32].iter_mut() {
+        *n = 250;
+    }
+    matrix.data_mut()[32] = 100; // end
+    matrix.data_mut()[34] = 100; // start x = 0
+    matrix.data_mut()[66] = 100; // end
+    matrix.data_mut()[69] = 100; // start x = 1
+    matrix.data_mut()[101] = 100; // end
+    matrix.data_mut()[102] = 100; // start
+    matrix.data_mut()[134] = 100; // end
+    matrix.data_mut()[137] = 100; // start
+    matrix.data_mut()[169] = 100; // end
+    matrix.data_mut()[170] = 100; // start
+    matrix.data_mut()[202] = 100; // end
+    matrix.data_mut()[204] = 100; // start
+    matrix.data_mut()[236] = 100; // end
+    matrix.data_mut()[237] = 100; // start
+    matrix.data_mut()[268] = 100; // end
+    matrix.data_mut()[270] = 100; // start
+    matrix.data_mut()[301] = 100; // end
+    matrix.data_mut()[302] = 100; // start
+    matrix.data_mut()[332] = 100; // end
+    matrix.data_mut()[334] = 100; // start
+    matrix.data_mut()[364] = 100; // end
+    matrix.data_mut()[365] = 100; // start
+    matrix.data_mut()[394] = 100; // end
+    matrix.data_mut()[396] = 100; // start
+    matrix.data_mut()[425] = 100; // end
+    matrix.data_mut()[426] = 100; // start
+    matrix.data_mut()[454] = 100; // end
+    matrix.data_mut()[456] = 100; // start
+    matrix.data_mut()[484] = 100; // end
+    matrix.data_mut()[485] = 100; // start
+    matrix.data_mut()[512] = 100; // end
+    matrix.data_mut()[514] = 100; // start
+    matrix.data_mut()[541] = 100; // end
+    matrix.data_mut()[542] = 100; // start
+    matrix.data_mut()[568] = 100; // end
+    matrix.data_mut()[570] = 100; // start
+    matrix.data_mut()[596] = 100; // end
+    matrix.data_mut()[597] = 100; // start
+    matrix.data_mut()[622] = 100; // end
+    matrix.data_mut()[624] = 100; // start
+    matrix.data_mut()[649] = 100; // end
+    matrix.data_mut()[650] = 100; // start
+    matrix.data_mut()[674] = 100; // end
+    matrix.data_mut()[676] = 100; // start
+    matrix.data_mut()[700] = 100; // end
+    matrix.data_mut()[701] = 100; // start
+    matrix.data_mut()[724] = 100; // end
+    matrix.data_mut()[726] = 100; // start
+    matrix.data_mut()[749] = 100; // end
+    matrix.data_mut()[750] = 100; // start
+    matrix.data_mut()[772] = 100; // end
+    matrix.data_mut()[774] = 100; // start
+    matrix.data_mut()[796] = 100; // end
+    matrix.data_mut()[797] = 100; // start
+    matrix.data_mut()[818] = 100; // end
+    matrix.data_mut()[820] = 100; // start
+    matrix.data_mut()[841] = 100; // end
+    matrix.data_mut()[842] = 100; // start
+    matrix.data_mut()[862] = 100; // end
+    matrix.data_mut()[864] = 100; // start
+    matrix.data_mut()[884] = 100; // end
+    matrix.data_mut()[885] = 100; // start
+    matrix.data_mut()[904] = 100; // end
+    matrix.data_mut()[906] = 100; // start
+    matrix.data_mut()[925] = 100; // end
+    matrix.data_mut()[926] = 100; // start
+    matrix.data_mut()[944] = 100; // end
+    matrix.data_mut()[946] = 100; // start
+    matrix.data_mut()[964] = 100; // end
+    matrix.data_mut()[965] = 100; // start
+    matrix.data_mut()[982] = 100; // end
+    matrix.data_mut()[984] = 100; // start
+    matrix.data_mut()[1001] = 100; // end
+    matrix.data_mut()[1002] = 100; // start
+    matrix.data_mut()[1018] = 100; // end
+    matrix.data_mut()[1020] = 100; // start
+    matrix.data_mut()[1036] = 100; // end
+    matrix.data_mut()[1037] = 100; // start
+    matrix.data_mut()[1052] = 100; // end
+    matrix.data_mut()[1054] = 100; // start
+    matrix.data_mut()[1069] = 100; // end
+    matrix.data_mut()[1070] = 100; // start
+    matrix.data_mut()[1084] = 100; // end
+    matrix.data_mut()[1086] = 100; // start
+    matrix.data_mut()[1100] = 100; // end
+    matrix.data_mut()[1101] = 100; // start
+    matrix.data_mut()[1114] = 100; // end
+    matrix.data_mut()[1116] = 100; // start
+    matrix.data_mut()[1129] = 100; // end
+    matrix.data_mut()[1130] = 100; // start
+    matrix.data_mut()[1142] = 100; // end
+    matrix.data_mut()[1144] = 100; // start
+    matrix.data_mut()[1156] = 100; // end
+    matrix.data_mut()[1157] = 100; // start
+    matrix.data_mut()[1168] = 100; // end
+    matrix.data_mut()[1170] = 100; // start
+    matrix.data_mut()[1181] = 100; // end
+    matrix.data_mut()[1182] = 100; // start
+    matrix.data_mut()[1192] = 100; // end
+    matrix.data_mut()[1194] = 100; // start
+    matrix.data_mut()[1204] = 100; // end
+    matrix.data_mut()[1205] = 100; // start
+    matrix.data_mut()[1214] = 100; // end
+    matrix.data_mut()[1216] = 100; // start
+    matrix.data_mut()[1225] = 100; // end
+    matrix.data_mut()[1226] = 100; // start
+    matrix.data_mut()[1234] = 100; // end
+    matrix.data_mut()[1236] = 100; // start
+    for n in matrix.data_mut()[1237..1244].iter_mut() {
+        *n = 250;
+    }
+    matrix.data_mut()[1244] = 100; // end
+    println!("{:?}", &matrix);
+
+    client.proxies().anime().write(matrix).unwrap();
+}

asusctl/examples/anime-png.rs

@@ -0,0 +1,39 @@
+use std::{env, error::Error, path::Path, process::exit};
+
+use rog_anime::{
+    usb::get_anime_type,
+    AnimeDataBuffer, {AnimeImage, Vec2},
+};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn Error>> {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 7 {
+        println!("Usage: <filepath> <scale> <angle> <x pos> <y pos> <brightness>");
+        println!("e.g, asusctl/examples/doom_large.png 0.9 0.4 0.0 0.0 0.8");
+        exit(-1);
+    }
+
+    let anime_type = get_anime_type()?;
+    let matrix = AnimeImage::from_png(
+        Path::new(&args[1]),
+        args[2].parse::<f32>().unwrap(),
+        args[3].parse::<f32>().unwrap(),
+        Vec2::new(
+            args[4].parse::<f32>().unwrap(),
+            args[5].parse::<f32>().unwrap(),
+        ),
+        args[6].parse::<f32>().unwrap(),
+        anime_type,
+    )?;
+
+    client
+        .proxies()
+        .anime()
+        .write(<AnimeDataBuffer>::from(&matrix))
+        .unwrap();
+
+    Ok(())
+}

asusctl/examples/anime-spinning.rs

@@ -0,0 +1,48 @@
+use std::{
+    env, error::Error, f32::consts::PI, path::Path, process::exit, thread::sleep, time::Duration,
+};
+
+use rog_anime::{
+    usb::get_anime_type,
+    AnimeDataBuffer, {AnimeImage, Vec2},
+};
+use rog_dbus::RogDbusClientBlocking;
+
+fn main() -> Result<(), Box<dyn Error>> {
+    let (client, _) = RogDbusClientBlocking::new().unwrap();
+
+    let args: Vec<String> = env::args().into_iter().collect();
+    if args.len() != 7 {
+        println!("Usage: <filepath> <scale> <angle> <x pos> <y pos> <brightness>");
+        println!("e.g, asusctl/examples/doom_large.png 0.9 0.4 0.0 0.0 0.8");
+        exit(-1);
+    }
+
+    let anime_type = get_anime_type()?;
+    let mut matrix = AnimeImage::from_png(
+        Path::new(&args[1]),
+        args[2].parse::<f32>().unwrap(),
+        args[3].parse::<f32>().unwrap(),
+        Vec2::new(
+            args[4].parse::<f32>().unwrap(),
+            args[5].parse::<f32>().unwrap(),
+        ),
+        args[6].parse::<f32>().unwrap(),
+        anime_type,
+    )?;
+
+    loop {
+        matrix.angle += 0.05;
+        if matrix.angle > PI * 2.0 {
+            matrix.angle = 0.0
+        }
+        matrix.update();
+
+        client
+            .proxies()
+            .anime()
+            .write(<AnimeDataBuffer>::from(&matrix))
+            .unwrap();
+        sleep(Duration::from_micros(500));
+    }
+}

asusctl/src/anime_cli.rs

@@ -0,0 +1,101 @@
+use gumdrop::Options;
+
+#[derive(Options)]
+pub struct AnimeCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(
+        meta = "",
+        help = "enable/disable the panel LEDs (does not erase last image)"
+    )]
+    pub enable: Option<bool>,
+    #[options(
+        meta = "",
+        help = "enable/disable system animations (boot/sleep/shutdown)"
+    )]
+    pub boot_enable: Option<bool>,
+    #[options(meta = "", help = "set global AniMe brightness value")]
+    pub brightness: Option<f32>,
+    #[options(command)]
+    pub command: Option<AnimeActions>,
+}
+
+#[derive(Options)]
+pub enum AnimeActions {
+    #[options(help = "display a PNG image")]
+    Image(AnimeImage),
+    #[options(help = "display a diagonal/pixel-perfect PNG")]
+    PixelImage(AnimeImageDiagonal),
+    #[options(help = "display an animated GIF")]
+    Gif(AnimeGif),
+    #[options(help = "display an animated diagonal/pixel-perfect GIF")]
+    PixelGif(AnimeGifDiagonal),
+}
+
+#[derive(Options)]
+pub struct AnimeImage {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "scale 1.0 == normal")]
+    pub scale: f32,
+    #[options(meta = "", default = "0.0", help = "x position (float)")]
+    pub x_pos: f32,
+    #[options(meta = "", default = "0.0", help = "y position (float)")]
+    pub y_pos: f32,
+    #[options(meta = "", default = "0.0", help = "the angle in radians")]
+    pub angle: f32,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+}
+
+#[derive(Options)]
+pub struct AnimeImageDiagonal {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+}
+
+#[derive(Options)]
+pub struct AnimeGif {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "scale 1.0 == normal")]
+    pub scale: f32,
+    #[options(meta = "", default = "0.0", help = "x position (float)")]
+    pub x_pos: f32,
+    #[options(meta = "", default = "0.0", help = "y position (float)")]
+    pub y_pos: f32,
+    #[options(meta = "", default = "0.0", help = "the angle in radians")]
+    pub angle: f32,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+    #[options(
+        meta = "",
+        default = "1",
+        help = "how many loops to play - 0 is infinite"
+    )]
+    pub loops: u32,
+}
+
+#[derive(Options)]
+pub struct AnimeGifDiagonal {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "full path to the png to display")]
+    pub path: String,
+    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    pub bright: f32,
+    #[options(
+        meta = "",
+        default = "1",
+        help = "how many loops to play - 0 is infinite"
+    )]
+    pub loops: u32,
+}

asusctl/src/aura_cli.rs

@@ -0,0 +1,359 @@
+use gumdrop::Options;
+use rog_aura::{error::Error, AuraEffect, AuraModeNum, AuraZone, Colour, Direction, Speed};
+use std::str::FromStr;
+
+#[derive(Options)]
+pub struct LedPowerCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(command)]
+    pub command: Option<SetAuraEnabled>,
+}
+
+#[derive(Options)]
+pub enum SetAuraEnabled {
+    #[options(help = "set <keyboard, logo, lightbar> to enabled while the device is booting")]
+    Boot(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to animate while the device is suspended")]
+    Sleep(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to enabled while device is awake")]
+    Awake(AuraEnabled),
+    #[options(help = "set <keyboard, logo, lightbar> to animate while the device is shutdown")]
+    Shutdown(AuraEnabled),
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct AuraEnabled {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(meta = "", help = "<true/false>")]
+    pub keyboard: Option<bool>,
+    #[options(meta = "", help = "<true/false>")]
+    pub logo: Option<bool>,
+    #[options(meta = "", help = "<true/false>")]
+    pub lightbar: Option<bool>,
+}
+
+// impl FromStr for AuraEnabled {
+//     type Err = Error;
+
+//     fn from_str(s: &str) -> Result<Self, Self::Err> {
+//         let s = s.to_lowercase();
+//         dbg!(s);
+//         Ok(Self {
+//             help: false,
+//             keyboard: None,
+//             logo: None,
+//             lightbar: None,
+//         })
+//     }
+// }
+
+#[derive(Options)]
+pub struct LedBrightness {
+    level: Option<u32>,
+}
+impl LedBrightness {
+    pub fn new(level: Option<u32>) -> Self {
+        LedBrightness { level }
+    }
+
+    pub fn level(&self) -> Option<u32> {
+        self.level
+    }
+}
+impl FromStr for LedBrightness {
+    type Err = Error;
+
+    fn from_str(s: &str) -> Result<Self, Self::Err> {
+        let s = s.to_lowercase();
+        match s.as_str() {
+            "off" => Ok(LedBrightness { level: Some(0x00) }),
+            "low" => Ok(LedBrightness { level: Some(0x01) }),
+            "med" => Ok(LedBrightness { level: Some(0x02) }),
+            "high" => Ok(LedBrightness { level: Some(0x03) }),
+            _ => {
+                print!("Invalid argument, must be one of: off, low, med, high");
+                Err(Error::ParseBrightness)
+            }
+        }
+    }
+}
+impl ToString for LedBrightness {
+    fn to_string(&self) -> String {
+        let s = match self.level {
+            Some(0x00) => "low",
+            Some(0x01) => "med",
+            Some(0x02) => "high",
+            _ => "unknown",
+        };
+        s.to_string()
+    }
+}
+
+#[derive(Debug, Clone, Options, Default)]
+pub struct SingleSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "WORD", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Options, Default)]
+pub struct SingleSpeedDirection {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the direction: up, down, left, right")]
+    pub direction: Direction,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct SingleColour {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour: Colour,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct SingleColourSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour: Colour,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Options, Default)]
+pub struct TwoColourSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(no_long, meta = "", help = "set the first RGB value e.g, ff00ff")]
+    pub colour: Colour,
+    #[options(no_long, meta = "", help = "set the second RGB value e.g, ff00ff")]
+    pub colour2: Colour,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+    #[options(
+        no_long,
+        meta = "",
+        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct MultiZone {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(short = "a", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour1: Colour,
+    #[options(short = "b", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour2: Colour,
+    #[options(short = "c", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour3: Colour,
+    #[options(short = "d", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour4: Colour,
+}
+
+#[derive(Debug, Clone, Default, Options)]
+pub struct MultiColourSpeed {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(short = "a", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour1: Colour,
+    #[options(short = "b", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour2: Colour,
+    #[options(short = "c", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour3: Colour,
+    #[options(short = "d", meta = "", help = "set the RGB value e.g, ff00ff")]
+    pub colour4: Colour,
+    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+    pub speed: Speed,
+}
+
+/// Byte value for setting the built-in mode.
+///
+/// Enum corresponds to the required integer value
+///
+// NOTE: The option names here must match those in rog-aura crate
+#[derive(Options)]
+pub enum SetAuraBuiltin {
+    #[options(help = "set a single static colour")]
+    Static(SingleColour),
+    #[options(help = "pulse between one or two colours")]
+    Breathe(TwoColourSpeed),
+    #[options(help = "strobe through all colours")]
+    Strobe(SingleSpeed),
+    #[options(help = "rainbow cycling in one of four directions")]
+    Rainbow(SingleSpeedDirection),
+    #[options(help = "rain pattern mimicking raindrops")]
+    Stars(TwoColourSpeed),
+    #[options(help = "rain pattern of three preset colours")]
+    Rain(SingleSpeed),
+    #[options(help = "pressed keys are highlighted to fade")]
+    Highlight(SingleColourSpeed),
+    #[options(help = "pressed keys generate horizontal laser")]
+    Laser(SingleColourSpeed),
+    #[options(help = "pressed keys ripple outwards like a splash")]
+    Ripple(SingleColourSpeed),
+    #[options(help = "set a rapid pulse")]
+    Pulse(SingleColour),
+    #[options(help = "set a vertical line zooming from left")]
+    Comet(SingleColour),
+    #[options(help = "set a wide vertical line zooming from left")]
+    Flash(SingleColour),
+}
+
+impl Default for SetAuraBuiltin {
+    fn default() -> Self {
+        SetAuraBuiltin::Static(SingleColour::default())
+    }
+}
+
+impl From<&SingleColour> for AuraEffect {
+    fn from(aura: &SingleColour) -> Self {
+        Self {
+            colour1: aura.colour,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SingleSpeed> for AuraEffect {
+    fn from(aura: &SingleSpeed) -> Self {
+        Self {
+            speed: aura.speed,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SingleColourSpeed> for AuraEffect {
+    fn from(aura: &SingleColourSpeed) -> Self {
+        Self {
+            colour1: aura.colour,
+            speed: aura.speed,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&TwoColourSpeed> for AuraEffect {
+    fn from(aura: &TwoColourSpeed) -> Self {
+        Self {
+            colour1: aura.colour,
+            colour2: aura.colour2,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SingleSpeedDirection> for AuraEffect {
+    fn from(aura: &SingleSpeedDirection) -> Self {
+        Self {
+            speed: aura.speed,
+            direction: aura.direction,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&SetAuraBuiltin> for AuraEffect {
+    fn from(aura: &SetAuraBuiltin) -> Self {
+        match aura {
+            SetAuraBuiltin::Static(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Static;
+                data
+            }
+            SetAuraBuiltin::Breathe(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Breathe;
+                data
+            }
+            SetAuraBuiltin::Strobe(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Strobe;
+                data
+            }
+            SetAuraBuiltin::Rainbow(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Rainbow;
+                data
+            }
+            SetAuraBuiltin::Stars(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Star;
+                data
+            }
+            SetAuraBuiltin::Rain(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Rain;
+                data
+            }
+            SetAuraBuiltin::Highlight(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Highlight;
+                data
+            }
+            SetAuraBuiltin::Laser(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Laser;
+                data
+            }
+            SetAuraBuiltin::Ripple(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Ripple;
+                data
+            }
+            SetAuraBuiltin::Pulse(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Pulse;
+                data
+            }
+            SetAuraBuiltin::Comet(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Comet;
+                data
+            }
+            SetAuraBuiltin::Flash(x) => {
+                let mut data: AuraEffect = x.into();
+                data.mode = AuraModeNum::Flash;
+                data
+            }
+        }
+    }
+}

asusctl/src/cli_opts.rs

@@ -0,0 +1,84 @@
+use crate::{
+    anime_cli::AnimeCommand,
+    aura_cli::{LedBrightness, LedPowerCommand, SetAuraBuiltin},
+    profiles_cli::{FanCurveCommand, ProfileCommand},
+};
+use gumdrop::Options;
+
+#[derive(Default, Options)]
+pub struct CliStart {
+    #[options(help_flag, help = "print help message")]
+    pub help: bool,
+    #[options(help = "show program version number")]
+    pub version: bool,
+    #[options(help = "show supported functions of this laptop")]
+    pub show_supported: bool,
+    #[options(meta = "", help = "<off, low, med, high>")]
+    pub kbd_bright: Option<LedBrightness>,
+    #[options(help = "Toggle to next keyboard brightness")]
+    pub next_kbd_bright: bool,
+    #[options(help = "Toggle to previous keyboard brightness")]
+    pub prev_kbd_bright: bool,
+    #[options(meta = "", help = "Set your battery charge limit <20-100>")]
+    pub chg_limit: Option<u8>,
+    #[options(command)]
+    pub command: Option<CliCommand>,
+}
+
+#[derive(Options)]
+pub enum CliCommand {
+    #[options(help = "Set the keyboard lighting from built-in modes")]
+    LedMode(LedModeCommand),
+    #[options(help = "Set the keyboard lighting from built-in modes")]
+    LedPower(LedPowerCommand),
+    #[options(help = "Set or select platform_profile")]
+    Profile(ProfileCommand),
+    #[options(help = "Set, select, or modify fan curves if supported")]
+    FanCurve(FanCurveCommand),
+    #[options(help = "Set the graphics mode (obsoleted by supergfxctl)")]
+    Graphics(GraphicsCommand),
+    #[options(name = "anime", help = "Manage AniMe Matrix")]
+    Anime(AnimeCommand),
+    #[options(help = "Change bios settings")]
+    Bios(BiosCommand),
+}
+
+#[derive(Options)]
+pub struct LedModeCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(help = "switch to next aura mode")]
+    pub next_mode: bool,
+    #[options(help = "switch to previous aura mode")]
+    pub prev_mode: bool,
+    #[options(command)]
+    pub command: Option<SetAuraBuiltin>,
+}
+
+#[derive(Options)]
+pub struct GraphicsCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+}
+
+#[derive(Options, Debug)]
+pub struct BiosCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(
+        meta = "",
+        no_long,
+        help = "set bios POST sound: asusctl -p <true/false>"
+    )]
+    pub post_sound_set: Option<bool>,
+    #[options(no_long, help = "read bios POST sound")]
+    pub post_sound_get: bool,
+    #[options(
+        meta = "",
+        no_long,
+        help = "activate dGPU dedicated/G-Sync: asusctl -d <true/false>, reboot required"
+    )]
+    pub dedicated_gfx_set: Option<bool>,
+    #[options(no_long, help = "get GPU mode")]
+    pub dedicated_gfx_get: bool,
+}

asusctl/src/main.rs

@@ -0,0 +1,762 @@
+use std::process::Command;
+use std::thread::sleep;
+use std::{env::args, path::Path};
+
+use aura_cli::LedPowerCommand;
+use gumdrop::{Opt, Options};
+
+use anime_cli::{AnimeActions, AnimeCommand};
+use profiles_cli::{FanCurveCommand, ProfileCommand};
+use rog_anime::usb::get_anime_type;
+use rog_anime::{AnimTime, AnimeDataBuffer, AnimeDiagonal, AnimeGif, AnimeImage, Vec2};
+use rog_aura::usb::AuraControl;
+use rog_aura::{self, AuraEffect};
+use rog_dbus::RogDbusClientBlocking;
+use rog_profiles::error::ProfileError;
+use rog_supported::SupportedFunctions;
+use rog_supported::{
+    AnimeSupportedFunctions, LedSupportedFunctions, PlatformProfileFunctions,
+    RogBiosSupportedFunctions,
+};
+
+use crate::aura_cli::LedBrightness;
+use crate::cli_opts::*;
+
+mod anime_cli;
+mod aura_cli;
+mod cli_opts;
+mod profiles_cli;
+
+const CONFIG_ADVICE: &str = "A config file need to be removed so a new one can be generated";
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let args: Vec<String> = args().skip(1).collect();
+
+    let parsed: CliStart;
+    let missing_argument_k = gumdrop::Error::missing_argument(Opt::Short('k'));
+    match CliStart::parse_args_default(&args) {
+        Ok(p) => {
+            parsed = p;
+        }
+        Err(err) if err.to_string() == missing_argument_k.to_string() => {
+            parsed = CliStart {
+                kbd_bright: Some(LedBrightness::new(None)),
+                ..Default::default()
+            };
+        }
+        Err(err) => {
+            eprintln!("source {}", err);
+            std::process::exit(2);
+        }
+    }
+
+    let (dbus, _) = RogDbusClientBlocking::new()
+        .map_err(|e| {
+            print_error_help(Box::new(e), None);
+            std::process::exit(3);
+        })
+        .unwrap();
+
+    let supported = dbus
+        .proxies()
+        .supported()
+        .supported_functions()
+        .map_err(|e| {
+            print_error_help(Box::new(e), None);
+            std::process::exit(4);
+        })
+        .unwrap();
+
+    if parsed.version {
+        print_versions();
+        println!();
+        print_laptop_info();
+        return Ok(());
+    }
+
+    if let Err(err) = do_parsed(&parsed, &supported, &dbus) {
+        print_error_help(err, Some(&supported));
+    }
+
+    Ok(())
+}
+
+fn print_error_help(err: Box<dyn std::error::Error>, supported: Option<&SupportedFunctions>) {
+    if do_diagnose("asusd") {
+        println!("\nError: {}\n", err);
+        print_versions();
+        println!();
+        print_laptop_info();
+        if let Some(supported) = supported {
+            println!();
+            println!("Supported laptop functions:\n\n{}", supported);
+        }
+    }
+}
+
+fn print_versions() {
+    println!("App and daemon versions:");
+    println!("      asusctl v{}", env!("CARGO_PKG_VERSION"));
+    println!("        asusd v{}", daemon::VERSION);
+    println!("\nComponent crate versions:");
+    println!("    rog-anime v{}", rog_anime::VERSION);
+    println!("     rog-aura v{}", rog_aura::VERSION);
+    println!("     rog-dbus v{}", rog_dbus::VERSION);
+    println!(" rog-profiles v{}", rog_profiles::VERSION);
+    println!("rog-supported v{}", rog_supported::VERSION);
+}
+
+fn print_laptop_info() {
+    let dmi = sysfs_class::DmiId::default();
+    let board_name = dmi.board_name().expect("Could not get board_name");
+    let prod_family = dmi.product_family().expect("Could not get product_family");
+
+    println!("Product family: {}", prod_family.trim());
+    println!("Board name: {}", board_name.trim());
+}
+
+fn do_diagnose(name: &str) -> bool {
+    if name != "asusd" && !check_systemd_unit_enabled(name) {
+        println!(
+            "\n\x1b[0;31m{} is not enabled, enable it with `systemctl enable {}\x1b[0m",
+            name, name
+        );
+        return true;
+    } else if !check_systemd_unit_active(name) {
+        println!(
+            "\n\x1b[0;31m{} is not running, start it with `systemctl start {}\x1b[0m",
+            name, name
+        );
+        return true;
+    } else {
+        println!("\nSome error happened (sorry)");
+        println!(
+            "Please use `systemctl status {}` and `journalctl -b -u {}` for more information",
+            name, name
+        );
+        println!("{}", CONFIG_ADVICE);
+    }
+    false
+}
+
+fn do_parsed(
+    parsed: &CliStart,
+    supported: &SupportedFunctions,
+    dbus: &RogDbusClientBlocking,
+) -> Result<(), Box<dyn std::error::Error>> {
+    match &parsed.command {
+        Some(CliCommand::LedMode(mode)) => handle_led_mode(dbus, &supported.keyboard_led, mode)?,
+        Some(CliCommand::LedPower(pow)) => handle_led_power(dbus, &supported.keyboard_led, pow)?,
+        Some(CliCommand::Profile(cmd)) => handle_profile(dbus, &supported.platform_profile, cmd)?,
+        Some(CliCommand::FanCurve(cmd)) => {
+            handle_fan_curve(dbus, &supported.platform_profile, cmd)?
+        }
+        Some(CliCommand::Graphics(_)) => do_gfx()?,
+        Some(CliCommand::Anime(cmd)) => handle_anime(dbus, &supported.anime_ctrl, cmd)?,
+        Some(CliCommand::Bios(cmd)) => handle_bios_option(dbus, &supported.rog_bios_ctrl, cmd)?,
+        None => {
+            if (!parsed.show_supported
+                && parsed.kbd_bright.is_none()
+                && parsed.chg_limit.is_none()
+                && !parsed.next_kbd_bright
+                && !parsed.prev_kbd_bright)
+                || parsed.help
+            {
+                println!("{}", CliStart::usage());
+                println!();
+                if let Some(cmdlist) = CliStart::command_list() {
+                    println!("{}", cmdlist);
+                }
+            }
+        }
+    }
+
+    if let Some(brightness) = &parsed.kbd_bright {
+        match brightness.level() {
+            None => {
+                let level = dbus.proxies().led().led_brightness()?;
+                println!("Current keyboard led brightness: {}", level);
+            }
+            Some(level) => dbus
+                .proxies()
+                .led()
+                .set_brightness(<rog_aura::LedBrightness>::from(level))?,
+        }
+    }
+
+    if parsed.next_kbd_bright {
+        dbus.proxies().led().next_led_brightness()?;
+    }
+
+    if parsed.prev_kbd_bright {
+        dbus.proxies().led().prev_led_brightness()?;
+    }
+
+    if parsed.show_supported {
+        println!("Supported laptop functions:\n\n{}", supported);
+    }
+
+    if let Some(chg_limit) = parsed.chg_limit {
+        dbus.proxies().charge().set_limit(chg_limit)?;
+    }
+
+    Ok(())
+}
+
+fn do_gfx() -> Result<(), Box<dyn std::error::Error>> {
+    println!("Please use supergfxctl for graphics switching. supergfxctl is the result of making asusctl graphics switching generic so all laptops can use it");
+    println!("This command will be removed in future");
+    Ok(())
+}
+
+fn handle_anime(
+    dbus: &RogDbusClientBlocking,
+    _supported: &AnimeSupportedFunctions,
+    cmd: &AnimeCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if (cmd.command.is_none()
+        && cmd.enable.is_none()
+        && cmd.boot_enable.is_none()
+        && cmd.brightness.is_none())
+        || cmd.help
+    {
+        println!("Missing arg or command\n\n{}", cmd.self_usage());
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+    }
+    if let Some(anime_turn) = cmd.enable {
+        dbus.proxies().anime().set_on_off(anime_turn)?
+    }
+    if let Some(anime_boot) = cmd.boot_enable {
+        dbus.proxies().anime().set_boot_on_off(anime_boot)?
+    }
+    if let Some(bright) = cmd.brightness {
+        verify_brightness(bright);
+        dbus.proxies().anime().set_brightness(bright)?
+    }
+    if let Some(action) = cmd.command.as_ref() {
+        let anime_type = get_anime_type()?;
+        match action {
+            AnimeActions::Image(image) => {
+                if image.help_requested() || image.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", image.self_usage());
+                    if let Some(lst) = image.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(image.bright);
+
+                let matrix = AnimeImage::from_png(
+                    Path::new(&image.path),
+                    image.scale,
+                    image.angle,
+                    Vec2::new(image.x_pos, image.y_pos),
+                    image.bright,
+                    anime_type,
+                )?;
+
+                dbus.proxies()
+                    .anime()
+                    .write(<AnimeDataBuffer>::from(&matrix))?;
+            }
+            AnimeActions::PixelImage(image) => {
+                if image.help_requested() || image.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", image.self_usage());
+                    if let Some(lst) = image.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(image.bright);
+
+                let matrix = AnimeDiagonal::from_png(
+                    Path::new(&image.path),
+                    None,
+                    image.bright,
+                    anime_type,
+                )?;
+
+                dbus.proxies()
+                    .anime()
+                    .write(matrix.into_data_buffer(anime_type))?;
+            }
+            AnimeActions::Gif(gif) => {
+                if gif.help_requested() || gif.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", gif.self_usage());
+                    if let Some(lst) = gif.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(gif.bright);
+
+                let matrix = AnimeGif::from_gif(
+                    Path::new(&gif.path),
+                    gif.scale,
+                    gif.angle,
+                    Vec2::new(gif.x_pos, gif.y_pos),
+                    AnimTime::Count(1),
+                    gif.bright,
+                    anime_type,
+                )?;
+
+                let mut loops = gif.loops as i32;
+                loop {
+                    for frame in matrix.frames() {
+                        dbus.proxies().anime().write(frame.frame().clone())?;
+                        sleep(frame.delay());
+                    }
+                    if loops >= 0 {
+                        loops -= 1;
+                    }
+                    if loops == 0 {
+                        break;
+                    }
+                }
+            }
+            AnimeActions::PixelGif(gif) => {
+                if gif.help_requested() || gif.path.is_empty() {
+                    println!("Missing arg or command\n\n{}", gif.self_usage());
+                    if let Some(lst) = gif.self_command_list() {
+                        println!("\n{}", lst);
+                    }
+                    std::process::exit(1);
+                }
+                verify_brightness(gif.bright);
+
+                let matrix = AnimeGif::from_diagonal_gif(
+                    Path::new(&gif.path),
+                    AnimTime::Count(1),
+                    gif.bright,
+                    anime_type,
+                )?;
+
+                let mut loops = gif.loops as i32;
+                loop {
+                    for frame in matrix.frames() {
+                        dbus.proxies().anime().write(frame.frame().clone())?;
+                        sleep(frame.delay());
+                    }
+                    if loops >= 0 {
+                        loops -= 1;
+                    }
+                    if loops == 0 {
+                        break;
+                    }
+                }
+            }
+        }
+    }
+    Ok(())
+}
+
+fn verify_brightness(brightness: f32) {
+    if brightness < 0.0 || brightness > 1.0 {
+        println!(
+            "Image and global brightness must be between 0.0 and 1.0 (inclusive), was {}",
+            brightness
+        );
+        std::process::exit(1);
+    }
+}
+
+fn handle_led_mode(
+    dbus: &RogDbusClientBlocking,
+    supported: &LedSupportedFunctions,
+    mode: &LedModeCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if mode.command.is_none() && !mode.prev_mode && !mode.next_mode {
+        if !mode.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", mode.self_usage());
+        println!("Commands available");
+
+        if let Some(cmdlist) = LedModeCommand::command_list() {
+            let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+            for command in commands.iter().filter(|command| {
+                for mode in &supported.stock_led_modes {
+                    if command
+                        .trim()
+                        .starts_with(&<&str>::from(mode).to_lowercase())
+                    {
+                        return true;
+                    }
+                }
+                if !supported.multizone_led_mode.is_empty() && command.trim().starts_with("multi") {
+                    return true;
+                }
+                false
+            }) {
+                println!("{}", command);
+            }
+        }
+
+        println!("\nHelp can also be requested on modes, e.g: static --help");
+        return Ok(());
+    }
+
+    if mode.next_mode && mode.prev_mode {
+        println!("Please specify either next or previous");
+        return Ok(());
+    }
+    if mode.next_mode {
+        dbus.proxies().led().next_led_mode()?;
+    } else if mode.prev_mode {
+        dbus.proxies().led().prev_led_mode()?;
+    } else if let Some(mode) = mode.command.as_ref() {
+        if mode.help_requested() {
+            println!("{}", mode.self_usage());
+            return Ok(());
+        }
+        dbus.proxies()
+            .led()
+            .set_led_mode(&<AuraEffect>::from(mode))?;
+    }
+
+    Ok(())
+}
+
+fn handle_led_power(
+    dbus: &RogDbusClientBlocking,
+    _supported: &LedSupportedFunctions,
+    power: &LedPowerCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if power.command().is_none() {
+        if !power.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", power.self_usage());
+        println!("Commands available");
+
+        if let Some(cmdlist) = LedPowerCommand::command_list() {
+            let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+            for command in commands.iter() {
+                println!("{}", command);
+            }
+        }
+
+        println!("\nHelp can also be requested on commands, e.g: boot --help");
+        return Ok(());
+    }
+
+    if let Some(pow) = power.command.as_ref() {
+        if pow.help_requested() {
+            println!("{}", pow.self_usage());
+            return Ok(());
+        }
+
+        match pow {
+            // TODO: make this a macro or something
+            aura_cli::SetAuraEnabled::Boot(arg) => {
+                let mut enabled: Vec<AuraControl> = Vec::new();
+                let mut disabled: Vec<AuraControl> = Vec::new();
+                arg.keyboard.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::BootKeyb)
+                    } else {
+                        disabled.push(AuraControl::BootKeyb)
+                    }
+                });
+                arg.logo.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::BootLogo)
+                    } else {
+                        disabled.push(AuraControl::BootLogo)
+                    }
+                });
+                arg.lightbar.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::BootBar)
+                    } else {
+                        disabled.push(AuraControl::BootBar)
+                    }
+                });
+                if !enabled.is_empty() {
+                    dbus.proxies().led().set_leds_enabled(enabled)?;
+                }
+                if !disabled.is_empty() {
+                    dbus.proxies().led().set_leds_disabled(disabled)?;
+                }
+            }
+            aura_cli::SetAuraEnabled::Sleep(arg) => {
+                let mut enabled: Vec<AuraControl> = Vec::new();
+                let mut disabled: Vec<AuraControl> = Vec::new();
+                arg.keyboard.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::SleepKeyb)
+                    } else {
+                        disabled.push(AuraControl::SleepKeyb)
+                    }
+                });
+                arg.logo.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::SleepLogo)
+                    } else {
+                        disabled.push(AuraControl::SleepLogo)
+                    }
+                });
+                arg.lightbar.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::SleepBar)
+                    } else {
+                        disabled.push(AuraControl::SleepBar)
+                    }
+                });
+                if !enabled.is_empty() {
+                    dbus.proxies().led().set_leds_enabled(enabled)?;
+                }
+                if !disabled.is_empty() {
+                    dbus.proxies().led().set_leds_disabled(disabled)?;
+                }
+            }
+            aura_cli::SetAuraEnabled::Awake(arg) => {
+                let mut enabled: Vec<AuraControl> = Vec::new();
+                let mut disabled: Vec<AuraControl> = Vec::new();
+                arg.keyboard.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::AwakeKeyb)
+                    } else {
+                        disabled.push(AuraControl::AwakeKeyb)
+                    }
+                });
+                arg.logo.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::AwakeLogo)
+                    } else {
+                        disabled.push(AuraControl::AwakeLogo)
+                    }
+                });
+                arg.lightbar.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::AwakeBar)
+                    } else {
+                        disabled.push(AuraControl::AwakeBar)
+                    }
+                });
+                if !enabled.is_empty() {
+                    dbus.proxies().led().set_leds_enabled(enabled)?;
+                }
+                if !disabled.is_empty() {
+                    dbus.proxies().led().set_leds_disabled(disabled)?;
+                }
+            }
+            aura_cli::SetAuraEnabled::Shutdown(arg) => {
+                let mut enabled: Vec<AuraControl> = Vec::new();
+                let mut disabled: Vec<AuraControl> = Vec::new();
+                arg.keyboard.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::ShutdownKeyb)
+                    } else {
+                        disabled.push(AuraControl::ShutdownKeyb)
+                    }
+                });
+                arg.logo.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::ShutdownLogo)
+                    } else {
+                        disabled.push(AuraControl::ShutdownLogo)
+                    }
+                });
+                arg.lightbar.map(|v| {
+                    if v {
+                        enabled.push(AuraControl::ShutdownBar)
+                    } else {
+                        disabled.push(AuraControl::ShutdownBar)
+                    }
+                });
+                if !enabled.is_empty() {
+                    dbus.proxies().led().set_leds_enabled(enabled)?;
+                }
+                if !disabled.is_empty() {
+                    dbus.proxies().led().set_leds_disabled(disabled)?;
+                }
+            }
+        }
+    }
+
+    Ok(())
+}
+
+fn handle_profile(
+    dbus: &RogDbusClientBlocking,
+    supported: &PlatformProfileFunctions,
+    cmd: &ProfileCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if !supported.platform_profile {
+        println!("Profiles not supported by either this kernel or by the laptop.");
+        return Err(ProfileError::NotSupported.into());
+    }
+
+    if !cmd.next && !cmd.list && cmd.profile_set.is_none() && !cmd.profile_get {
+        if !cmd.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}", ProfileCommand::usage());
+
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+        std::process::exit(1);
+    }
+
+    if cmd.next {
+        dbus.proxies().profile().next_profile()?;
+    } else if let Some(profile) = cmd.profile_set {
+        dbus.proxies().profile().set_active_profile(profile)?;
+    }
+
+    if cmd.list {
+        let res = dbus.proxies().profile().profiles()?;
+        res.iter().for_each(|p| println!("{:?}", p));
+    }
+
+    if cmd.profile_get {
+        let res = dbus.proxies().profile().active_profile()?;
+        println!("Active profile is {:?}", res);
+    }
+
+    Ok(())
+}
+
+fn handle_fan_curve(
+    dbus: &RogDbusClientBlocking,
+    supported: &PlatformProfileFunctions,
+    cmd: &FanCurveCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if !supported.fan_curves {
+        println!("Fan-curves not supported by either this kernel or by the laptop.");
+        println!("This requires kernel 5.17 or the fan curve patch listed in the readme.");
+        return Err(ProfileError::NotSupported.into());
+    }
+
+    if !cmd.get_enabled && !cmd.default && cmd.mod_profile.is_none() {
+        if !cmd.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}", FanCurveCommand::usage());
+
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+        std::process::exit(1);
+    }
+
+    if (cmd.enabled.is_some() || cmd.fan.is_some() || cmd.data.is_some())
+        && cmd.mod_profile.is_none()
+    {
+        println!("--enabled, --fan, and --data options require --mod-profile");
+        std::process::exit(666);
+    }
+
+    if cmd.get_enabled {
+        let res = dbus.proxies().profile().enabled_fan_profiles()?;
+        println!("{:?}", res);
+    }
+
+    if cmd.default {
+        dbus.proxies().profile().set_active_curve_to_defaults()?;
+    }
+
+    if let Some(profile) = cmd.mod_profile {
+        if cmd.enabled.is_none() && cmd.data.is_none() {
+            let data = dbus.proxies().profile().fan_curve_data(profile)?;
+            let data = toml::to_string(&data)?;
+            println!("\nFan curves for {:?}\n\n{}", profile, data);
+        }
+
+        if let Some(enabled) = cmd.enabled {
+            dbus.proxies()
+                .profile()
+                .set_fan_curve_enabled(profile, enabled)?;
+        }
+
+        if let Some(mut curve) = cmd.data.clone() {
+            let fan = cmd.fan.unwrap_or_default();
+            curve.set_fan(fan);
+            dbus.proxies().profile().set_fan_curve(profile, curve)?;
+        }
+    }
+
+    Ok(())
+}
+
+fn handle_bios_option(
+    dbus: &RogDbusClientBlocking,
+    supported: &RogBiosSupportedFunctions,
+    cmd: &BiosCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    {
+        if (cmd.dedicated_gfx_set.is_none()
+            && !cmd.dedicated_gfx_get
+            && cmd.post_sound_set.is_none()
+            && !cmd.post_sound_get)
+            || cmd.help
+        {
+            println!("Missing arg or command\n");
+
+            let usage: Vec<String> = BiosCommand::usage()
+                .lines()
+                .map(|s| s.to_string())
+                .collect();
+
+            for line in usage.iter().filter(|line| {
+                line.contains("sound") && supported.post_sound_toggle
+                    || line.contains("GPU") && supported.dedicated_gfx_toggle
+            }) {
+                println!("{}", line);
+            }
+        }
+
+        if let Some(opt) = cmd.post_sound_set {
+            dbus.proxies().rog_bios().set_post_boot_sound(opt)?;
+        }
+        if cmd.post_sound_get {
+            let res = dbus.proxies().rog_bios().post_boot_sound()? == 1;
+            println!("Bios POST sound on: {}", res);
+        }
+        if let Some(opt) = cmd.dedicated_gfx_set {
+            println!("Rebuilding initrd to include drivers");
+            dbus.proxies().rog_bios().set_dedicated_graphic_mode(opt)?;
+            println!("The mode change is not active until you reboot, on boot the bios will make the required change");
+            if opt {
+                println!(
+                    "NOTE: on reboot your display manager will be forced to use Nvidia drivers"
+                );
+            } else {
+                println!("NOTE: after reboot you can then select regular graphics modes");
+            }
+        }
+        if cmd.dedicated_gfx_get {
+            let res = dbus.proxies().rog_bios().dedicated_graphic_mode()? == 1;
+            println!("Bios dedicated GPU on: {}", res);
+        }
+    }
+    Ok(())
+}
+
+fn check_systemd_unit_active(name: &str) -> bool {
+    if let Ok(out) = Command::new("systemctl")
+        .arg("is-active")
+        .arg(name)
+        .output()
+    {
+        let buf = String::from_utf8_lossy(&out.stdout);
+        return !buf.contains("inactive") && !buf.contains("failed");
+    }
+    false
+}
+
+fn check_systemd_unit_enabled(name: &str) -> bool {
+    if let Ok(out) = Command::new("systemctl")
+        .arg("is-enabled")
+        .arg(name)
+        .output()
+    {
+        let buf = String::from_utf8_lossy(&out.stdout);
+        return buf.contains("enabled");
+    }
+    false
+}

asusctl/src/profiles_cli.rs

@@ -0,0 +1,51 @@
+use gumdrop::Options;
+use rog_profiles::{fan_curve_set::CurveData, FanCurvePU, Profile};
+
+#[derive(Debug, Clone, Options)]
+pub struct ProfileCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+    #[options(help = "toggle to next profile in list")]
+    pub next: bool,
+    #[options(help = "list available profiles")]
+    pub list: bool,
+
+    #[options(help = "get profile")]
+    pub profile_get: bool,
+    #[options(meta = "", help = "set the active profile")]
+    pub profile_set: Option<Profile>,
+}
+
+#[derive(Debug, Clone, Options)]
+pub struct FanCurveCommand {
+    #[options(help = "print help message")]
+    pub help: bool,
+
+    #[options(help = "get enabled fan profiles")]
+    pub get_enabled: bool,
+    #[options(help = "set the active profile's fan curve to default")]
+    pub default: bool,
+
+    #[options(
+        meta = "",
+        help = "profile to modify fan-curve for. Shows data if no options provided"
+    )]
+    pub mod_profile: Option<Profile>,
+    #[options(
+        meta = "",
+        help = "enable or disable <true/false> fan curve. `mod-profile` required"
+    )]
+    pub enabled: Option<bool>,
+    #[options(
+        meta = "",
+        help = "select fan <cpu/gpu> to modify. `mod-profile` required"
+    )]
+    pub fan: Option<FanCurvePU>,
+
+    #[options(
+        meta = "",
+        help = "data format = 30c:1%,49c:2%,59c:3%,69c:4%,79c:31%,89c:49%,99c:56%,109c:58%.
+                      `--mod-profile` required. If '%' is omitted the fan range is 0-255"
+    )]
+    pub data: Option<CurveData>,
+}

daemon-user/Cargo.toml

@@ -0,0 +1,32 @@
+[package]
+name = "daemon-user"
+version = "1.3.0"
+authors = ["Luke D Jones <luke@ljones.dev>"]
+edition = "2018"
+description = "Usermode daemon for user settings, anime, per-key lighting"
+
+[lib]
+name = "rog_user"
+path = "src/lib.rs"
+
+[[bin]]
+name = "asusd-user"
+path = "src/daemon.rs"
+
+[dependencies]
+# serialisation
+serde = "^1.0"
+serde_json = "^1.0"
+serde_derive = "^1.0"
+
+rog_anime = { path = "../rog-anime" }
+rog_dbus = { path = "../rog-dbus" }
+rog_supported = { path = "../rog-supported" }
+
+dirs = "^4.0"
+
+zbus = "^2.2"
+zvariant = "^3.0"
+zvariant_derive = "^3.0"
+
+smol = "^1.2"

daemon-user/README.md

@@ -0,0 +1,14 @@
+# daemon-user
+
+This crate is for the binary of `asusd-user` and its helper lib.
+
+The purpose of `asusd-user` is to run in userland and provide the user + third-party apps an interface for such things as creating AniMe sequences (and more in future, see todo list).
+
+`asusd-user` should try to be as simple as possible while allowing a decent degree of control.
+
+## TODO
+
+- [ ] CLI for basic settings/interaction
+- [ ] RGB keyboard per-key programs
+- [ ] User profiles (fan, cpu etc). These would be replacing the system-daemon profiles only when the user is active, otherwise system-daemon defaults to system settings.
+- [ ] Audio EQ visualiser - for use with anime + keyboard lighting

daemon-user/src/ctrl_anime.rs

@@ -0,0 +1,372 @@
+use rog_anime::error::AnimeError;
+use rog_anime::{ActionData, ActionLoader, AnimTime, Fade, Sequences, Vec2};
+use rog_dbus::RogDbusClientBlocking;
+use serde_derive::{Deserialize, Serialize};
+use std::time::Duration;
+use std::{
+    path::Path,
+    sync::{
+        atomic::{AtomicBool, Ordering},
+        Mutex,
+    },
+};
+use std::{sync::Arc, thread::sleep, time::Instant};
+use zbus::dbus_interface;
+use zvariant::ObjectPath;
+use zvariant_derive::Type;
+
+use crate::{error::Error, user_config::UserAnimeConfig};
+
+#[derive(Debug, Clone, Deserialize, Serialize, Type)]
+pub struct Timer {
+    type_of: TimeType,
+    /// If time type is Timer then this is milliseonds, otherwise it is animation loop count
+    count: u64,
+    /// Used only for `TimeType::Timer`, milliseonds to fade the image in for
+    fade_in: Option<u64>,
+    /// Used only for `TimeType::Timer`, milliseonds to fade the image out for
+    fade_out: Option<u64>,
+}
+
+impl From<Timer> for AnimTime {
+    fn from(time: Timer) -> Self {
+        match time.type_of {
+            TimeType::Timer => {
+                if time.fade_in.is_some() || time.fade_out.is_some() {
+                    let fade_in = time
+                        .fade_in
+                        .map_or(Duration::from_secs(0), Duration::from_millis);
+                    let fade_out = time
+                        .fade_out
+                        .map_or(Duration::from_secs(0), Duration::from_millis);
+                    let show_for = if time.count != 0 {
+                        Some(Duration::from_millis(time.count))
+                    } else {
+                        None
+                    };
+                    AnimTime::Fade(Fade::new(fade_in, show_for, fade_out))
+                } else {
+                    AnimTime::Time(Duration::from_millis(time.count))
+                }
+            }
+            TimeType::Count => AnimTime::Count(time.count as u32),
+            TimeType::Infinite => AnimTime::Infinite,
+        }
+    }
+}
+
+#[derive(Debug, Clone, Deserialize, Serialize, Type)]
+pub enum TimeType {
+    Timer,
+    Count,
+    Infinite,
+}
+
+/// The inner object exists to allow the zbus proxy to share it with a runner thread
+/// and a zbus server behind `Arc<Mutex<T>>`
+pub struct CtrlAnimeInner<'a> {
+    sequences: Sequences,
+    client: RogDbusClientBlocking<'a>,
+    do_early_return: Arc<AtomicBool>,
+}
+
+impl<'a> CtrlAnimeInner<'static> {
+    pub fn new(
+        sequences: Sequences,
+        client: RogDbusClientBlocking<'static>,
+        do_early_return: Arc<AtomicBool>,
+    ) -> Result<Self, Error> {
+        Ok(Self {
+            sequences,
+            client,
+            do_early_return,
+        })
+    }
+    /// To be called on each main loop iteration to pump out commands to the anime
+    pub fn run(&'a self) -> Result<(), Error> {
+        if self.do_early_return.load(Ordering::SeqCst) {
+            return Ok(());
+        }
+
+        for action in self.sequences.iter() {
+            match action {
+                ActionData::Animation(frames) => {
+                    rog_anime::run_animation(frames, &|output| {
+                        if self.do_early_return.load(Ordering::Acquire) {
+                            return Ok(true); // Do safe exit
+                        }
+                        self.client
+                            .proxies()
+                            .anime()
+                            .write(output)
+                            .map_err(|e| AnimeError::Dbus(format!("{}", e)))
+                            .map(|_| false)
+                    })?;
+                }
+                ActionData::Image(image) => {
+                    self.client
+                        .proxies()
+                        .anime()
+                        .write(image.as_ref().clone())
+                        .ok();
+                }
+                ActionData::Pause(duration) => {
+                    let start = Instant::now();
+                    'pause: loop {
+                        if self.do_early_return.load(Ordering::SeqCst) {
+                            return Ok(());
+                        }
+                        if Instant::now().duration_since(start) > *duration {
+                            break 'pause;
+                        }
+                        sleep(Duration::from_millis(1));
+                    }
+                }
+                ActionData::AudioEq => {}
+                ActionData::SystemInfo => {}
+                ActionData::TimeDate => {}
+                ActionData::Matrix => {}
+            }
+        }
+
+        Ok(())
+    }
+}
+
+pub struct CtrlAnime<'a> {
+    config: Arc<Mutex<UserAnimeConfig>>,
+    client: RogDbusClientBlocking<'a>,
+    inner: Arc<Mutex<CtrlAnimeInner<'a>>>,
+    /// Must be the same Atomic as in CtrlAnimeInner
+    inner_early_return: Arc<AtomicBool>,
+}
+
+impl<'a> CtrlAnime<'static> {
+    pub fn new(
+        config: Arc<Mutex<UserAnimeConfig>>,
+        inner: Arc<Mutex<CtrlAnimeInner<'static>>>,
+        client: RogDbusClientBlocking<'static>,
+        inner_early_return: Arc<AtomicBool>,
+    ) -> Result<Self, Error> {
+        Ok(CtrlAnime {
+            config,
+            client,
+            inner,
+            inner_early_return,
+        })
+    }
+
+    pub async fn add_to_server(self, server: &mut zbus::Connection) {
+        server
+            .object_server()
+            .at(
+                &ObjectPath::from_str_unchecked("/org/asuslinux/Anime"),
+                self,
+            )
+            .await
+            .map_err(|err| {
+                println!("CtrlAnime: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+// The pattern for a zbus method is:
+// - Get config lock if required
+// - Set inner_early_return to stop the inner run loop temporarily
+// - Do actions
+// - Write config if required
+// - Unset inner_early_return
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlAnime<'static> {
+    pub fn insert_asus_gif(
+        &mut self,
+        index: u32,
+        file: String,
+        time: Timer,
+        brightness: f32,
+    ) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let time: AnimTime = time.into();
+            let file = Path::new(&file);
+            let action = ActionLoader::AsusAnimation {
+                file: file.into(),
+                brightness,
+                time,
+            };
+
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json = serde_json::to_string_pretty(&*config).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    pub fn insert_image_gif(
+        &mut self,
+        index: u32,
+        file: String,
+        scale: f32,
+        angle: f32,
+        xy: (f32, f32),
+        time: Timer,
+        brightness: f32,
+    ) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let time: AnimTime = time.into();
+            let file = Path::new(&file);
+            let translation = Vec2::new(xy.0, xy.1);
+            let action = ActionLoader::ImageAnimation {
+                file: file.into(),
+                scale,
+                angle,
+                translation,
+                brightness,
+                time,
+            };
+
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    #[allow(clippy::too_many_arguments)]
+    pub fn insert_image(
+        &mut self,
+        index: u32,
+        file: String,
+        scale: f32,
+        angle: f32,
+        xy: (f32, f32),
+        time: Timer,
+        brightness: f32,
+    ) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let file = Path::new(&file);
+            let time = time.into();
+            let action = ActionLoader::Image {
+                file: file.into(),
+                scale,
+                angle,
+                translation: Vec2::new(xy.0, xy.1),
+                brightness,
+                time,
+            };
+
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    pub fn insert_pause(&mut self, index: u32, millis: u64) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            let action = ActionLoader::Pause(Duration::from_millis(millis));
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller
+                    .sequences
+                    .insert(index as usize, &action)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            }
+            config.anime.push(action);
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    pub fn remove_item(&mut self, index: u32) -> zbus::fdo::Result<String> {
+        if let Ok(mut config) = self.config.try_lock() {
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+
+            if let Ok(mut controller) = self.inner.lock() {
+                controller.sequences.remove_item(index as usize);
+            }
+            if (index as usize) < config.anime.len() {
+                config.anime.remove(index as usize);
+            }
+            config.write()?;
+
+            let json =
+                serde_json::to_string_pretty(&*config.anime).expect("Parse config to JSON failed");
+
+            // Release the inner run loop again
+            self.inner_early_return.store(false, Ordering::SeqCst);
+            return Ok(json);
+        }
+        Err(zbus::fdo::Error::Failed("UserConfig lock fail".into()))
+    }
+
+    pub fn set_state(&mut self, on: bool) -> zbus::fdo::Result<()> {
+        // Operations here need to be in specific order
+        if on {
+            self.client.proxies().anime().set_on_off(on).ok();
+            // Let the inner loop run
+            self.inner_early_return.store(false, Ordering::SeqCst);
+        } else {
+            // Must make the inner run loop return early
+            self.inner_early_return.store(true, Ordering::SeqCst);
+            self.client.proxies().anime().set_on_off(on).ok();
+        }
+        Ok(())
+    }
+}

daemon-user/src/daemon.rs

@@ -0,0 +1,72 @@
+use rog_anime::usb::get_anime_type;
+use rog_dbus::RogDbusClientBlocking;
+use rog_user::{
+    ctrl_anime::{CtrlAnime, CtrlAnimeInner},
+    user_config::*,
+    DBUS_NAME,
+};
+use smol::Executor;
+use std::sync::Arc;
+use std::sync::Mutex;
+use zbus::Connection;
+
+use std::sync::atomic::AtomicBool;
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    println!("  user daemon v{}", rog_user::VERSION);
+    println!("    rog-anime v{}", rog_anime::VERSION);
+    println!("     rog-dbus v{}", rog_dbus::VERSION);
+    println!("rog-supported v{}", rog_supported::VERSION);
+
+    let (client, _) = RogDbusClientBlocking::new()?;
+    let supported = client.proxies().supported().supported_functions()?;
+
+    let mut config = UserConfig::new();
+    config.load_config()?;
+
+    let executor = Executor::new();
+
+    let early_return = Arc::new(AtomicBool::new(false));
+    // Set up the anime data and run loop/thread
+    if supported.anime_ctrl.0 {
+        let anime_type = get_anime_type()?;
+        let anime_config = UserAnimeConfig::load_config(config.active_anime)?;
+        let anime = anime_config.create_anime(anime_type)?;
+        let anime_config = Arc::new(Mutex::new(anime_config));
+
+        executor
+            .spawn(async move {
+                // Create server
+                let mut connection = Connection::session().await.unwrap();
+                connection.request_name(DBUS_NAME).await.unwrap();
+
+                // Inner behind mutex required for thread safety
+                let inner = Arc::new(Mutex::new(
+                    CtrlAnimeInner::new(anime, client, early_return.clone()).unwrap(),
+                ));
+                // Need new client object for dbus control part
+                let (client, _) = RogDbusClientBlocking::new().unwrap();
+                let anime_control =
+                    CtrlAnime::new(anime_config, inner.clone(), client, early_return).unwrap();
+                anime_control.add_to_server(&mut connection).await;
+                loop {
+                    if let Ok(inner) = inner.clone().try_lock() {
+                        inner.run().ok();
+                    }
+                }
+            })
+            .detach();
+    }
+
+    // if supported.keyboard_led.per_key_led_mode {
+    //     executor
+    //         .spawn(async move {
+    //            //
+    //         })
+    //         .detach();
+    // }
+
+    loop {
+        smol::block_on(executor.tick());
+    }
+}

daemon-user/src/error.rs

@@ -0,0 +1,45 @@
+use std::fmt;
+
+use rog_anime::error::AnimeError;
+
+#[derive(Debug)]
+pub enum Error {
+    Io(std::io::Error),
+    ConfigLoadFail,
+    ConfigLockFail,
+    XdgVars,
+    Anime(AnimeError),
+}
+
+impl fmt::Display for Error {
+    // This trait requires `fmt` with this exact signature.
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        match self {
+            Error::Io(err) => write!(f, "Failed to open: {}", err),
+            Error::ConfigLoadFail => write!(f, "Failed to load user config"),
+            Error::ConfigLockFail => write!(f, "Failed to lock user config"),
+            Error::XdgVars => write!(f, "XDG environment vars appear unset"),
+            Error::Anime(err) => write!(f, "Anime error: {}", err),
+        }
+    }
+}
+
+impl std::error::Error for Error {}
+
+impl From<std::io::Error> for Error {
+    fn from(err: std::io::Error) -> Self {
+        Error::Io(err)
+    }
+}
+
+impl From<AnimeError> for Error {
+    fn from(err: AnimeError) -> Self {
+        Error::Anime(err)
+    }
+}
+
+impl From<Error> for zbus::fdo::Error {
+    fn from(err: Error) -> Self {
+        zbus::fdo::Error::Failed(format!("Anime zbus error: {}", err))
+    }
+}

daemon-user/src/lib.rs

@@ -0,0 +1,11 @@
+pub mod user_config;
+
+pub mod error;
+
+pub mod ctrl_anime;
+
+pub mod zbus_anime;
+
+pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
+
+pub static VERSION: &str = env!("CARGO_PKG_VERSION");

daemon-user/src/user_config.rs

@@ -0,0 +1,225 @@
+use std::{
+    fs::{create_dir, OpenOptions},
+    io::{Read, Write},
+    time::Duration,
+};
+
+use rog_anime::{ActionLoader, AnimTime, AnimeType, Fade, Sequences, Vec2};
+use serde_derive::{Deserialize, Serialize};
+
+use crate::error::Error;
+
+#[derive(Debug, Deserialize, Serialize)]
+pub struct UserAnimeConfig {
+    pub name: String,
+    pub anime: Vec<ActionLoader>,
+}
+
+impl UserAnimeConfig {
+    pub fn create_anime(&self, anime_type: AnimeType) -> Result<Sequences, Error> {
+        let mut seq = Sequences::new(anime_type);
+
+        for (idx, action) in self.anime.iter().enumerate() {
+            seq.insert(idx, action)?;
+        }
+
+        Ok(seq)
+    }
+
+    pub fn write(&self) -> Result<(), Error> {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+        let name = self.name.clone();
+        path.push(name + ".cfg");
+
+        let mut file = OpenOptions::new()
+            .write(true)
+            .create(true)
+            .truncate(true)
+            .open(&path)?;
+
+        let json = serde_json::to_string_pretty(&self).unwrap();
+        file.write_all(json.as_bytes())?;
+        Ok(())
+    }
+
+    pub fn load_config(name: String) -> Result<UserAnimeConfig, Error> {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+
+        path.push(name.clone() + ".cfg");
+
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&path)?;
+
+        let mut buf = String::new();
+
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                let default = UserAnimeConfig {
+                    name,
+                    ..Default::default()
+                };
+                let json = serde_json::to_string_pretty(&default).unwrap();
+                file.write_all(json.as_bytes())?;
+                return Ok(default);
+            } else if let Ok(data) = serde_json::from_str::<UserAnimeConfig>(&buf) {
+                return Ok(data);
+            }
+        }
+        Err(Error::ConfigLoadFail)
+    }
+}
+
+impl Default for UserAnimeConfig {
+    fn default() -> Self {
+        Self {
+            name: "default".to_string(),
+            anime: vec![
+                ActionLoader::AsusImage {
+                    file: "/usr/share/asusd/anime/custom/diagonal-template.png".into(),
+                    brightness: 1.0,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        None,
+                        Duration::from_secs(2),
+                    )),
+                },
+                ActionLoader::AsusAnimation {
+                    file: "/usr/share/asusd/anime/asus/rog/Sunset.gif".into(),
+                    brightness: 0.5,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(6),
+                        None,
+                        Duration::from_secs(3),
+                    )),
+                },
+                ActionLoader::ImageAnimation {
+                    file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                    scale: 0.9,
+                    angle: 0.65,
+                    translation: Vec2::default(),
+                    brightness: 0.5,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        Some(Duration::from_secs(2)),
+                        Duration::from_secs(2),
+                    )),
+                },
+                ActionLoader::Image {
+                    file: "/usr/share/asusd/anime/custom/rust.png".into(),
+                    scale: 1.0,
+                    angle: 0.0,
+                    translation: Vec2::default(),
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        Some(Duration::from_secs(1)),
+                        Duration::from_secs(2),
+                    )),
+                    brightness: 0.6,
+                },
+                ActionLoader::Pause(Duration::from_secs(1)),
+                ActionLoader::ImageAnimation {
+                    file: "/usr/share/asusd/anime/custom/sonic-wait.gif".into(),
+                    scale: 0.9,
+                    angle: 0.0,
+                    translation: Vec2::new(3.0, 2.0),
+                    brightness: 0.5,
+                    time: AnimTime::Count(2),
+                },
+            ],
+        }
+    }
+}
+
+#[derive(Debug, Default, Deserialize, Serialize)]
+pub struct UserConfig {
+    /// Name of active anime config file in the user config directory
+    pub active_anime: String,
+}
+
+impl UserConfig {
+    pub fn new() -> Self {
+        Self {
+            active_anime: "anime-default".to_string(),
+        }
+    }
+
+    pub fn load_config(&mut self) -> Result<(), Error> {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+
+        path.push("rog-user.cfg");
+
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&path)?;
+
+        let mut buf = String::new();
+
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                let json = serde_json::to_string_pretty(&self).unwrap();
+                file.write_all(json.as_bytes())?;
+            } else if let Ok(data) = serde_json::from_str::<UserConfig>(&buf) {
+                self.active_anime = data.active_anime;
+                return Ok(());
+            }
+        }
+        Ok(())
+    }
+
+    pub fn write(&self) -> Result<(), Error> {
+        let mut path = if let Some(dir) = dirs::config_dir() {
+            dir
+        } else {
+            return Err(Error::XdgVars);
+        };
+
+        path.push("rog");
+        if !path.exists() {
+            create_dir(path.clone())?;
+        }
+
+        path.push("rog-user.cfg");
+
+        let mut file = OpenOptions::new()
+            .write(true)
+            .create(true)
+            .truncate(true)
+            .open(&path)?;
+
+        let json = serde_json::to_string_pretty(&self).unwrap();
+        file.write_all(json.as_bytes())?;
+        Ok(())
+    }
+}

daemon-user/src/zbus_anime.rs

@@ -0,0 +1,69 @@
+//! # DBus interface proxy for: `org.asuslinux.Daemon`
+//!
+//! This code was generated by `zbus-xmlgen` `1.0.0` from DBus introspection data.
+//! Source: `Interface '/org/asuslinux/Anime' from service 'org.asuslinux.Daemon' on session bus`.
+//!
+//! You may prefer to adapt it, instead of using it verbatim.
+//!
+//! More information can be found in the
+//! [Writing a client proxy](https://dbus.pages.freedesktop.org/zbus/client.html)
+//! section of the zbus documentation.
+//!
+//! This DBus object implements
+//! [standard DBus interfaces](https://dbus.freedesktop.org/doc/dbus-specification.html),
+//! (`org.freedesktop.DBus.*`) for which the following zbus proxies can be used:
+//!
+//! * [`zbus::fdo::PeerProxy`]
+//! * [`zbus::fdo::IntrospectableProxy`]
+//! * [`zbus::fdo::PropertiesProxy`]
+//!
+//! …consequently `zbus-xmlgen` did not generate code for the above interfaces.
+#![allow(clippy::too_many_arguments)]
+
+use zbus::dbus_proxy;
+
+#[dbus_proxy(interface = "org.asuslinux.Daemon")]
+trait Daemon {
+    /// InsertAsusGif method
+    fn insert_asus_gif(
+        &self,
+        index: u32,
+        file: &str,
+        time: u32,
+        count: u32,
+        brightness: f64,
+    ) -> zbus::Result<String>;
+
+    /// InsertImage method
+    fn insert_image(
+        &self,
+        index: u32,
+        file: &str,
+        scale: f64,
+        angle: f64,
+        xy: &(f64, f64),
+        brightness: f64,
+    ) -> zbus::Result<String>;
+
+    /// InsertImageGif method
+    fn insert_image_gif(
+        &self,
+        index: u32,
+        file: &str,
+        scale: f64,
+        angle: f64,
+        xy: &(f64, f64),
+        time: u32,
+        count: u32,
+        brightness: f64,
+    ) -> zbus::Result<String>;
+
+    /// InsertPause method
+    fn insert_pause(&self, index: u32, millis: u64) -> zbus::Result<String>;
+
+    /// RemoveItem method
+    fn remove_item(&self, index: u32) -> zbus::Result<String>;
+
+    /// SetState method
+    fn set_state(&self, on: bool) -> zbus::Result<()>;
+}

daemon/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
-name = "asus-nb-ctrl"
-version = "2.2.1"
+name = "daemon"
+version = "4.2.0"
 license = "MPL-2.0"
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
@@ -13,37 +13,36 @@ edition = "2018"
 name = "daemon"
 path = "src/lib.rs"
 
-[[bin]]
-name = "asusctl"
-path = "src/main.rs"
-
 [[bin]]
 name = "asusd"
 path = "src/daemon.rs"
 
 [dependencies]
-asus-nb = { path = "../asus-nb" }
-rusb = "^0.6.0"
-udev = "^0.4.0"
+rog_anime = { path = "../rog-anime", features = ["dbus"] }
+rog_aura = { path = "../rog-aura", features = ["dbus"] }
+rog_supported = { path = "../rog-supported" }
+rog_profiles = { path = "../rog-profiles" }
+rog_dbus = { path = "../rog-dbus" }
+
+async-trait = "^0.1"
+smol = "^1.2"
+
+rusb = "^0.9"
+udev = "^0.6"
 
 # cli and logging
-gumdrop = "^0.8.0"
-log = "^0.4.8"
-env_logger = "^0.7.1"
+log = "^0.4"
+env_logger = "^0.9"
 
-zbus = "^1.8.0"
-zvariant = "^2.4.0"
+zbus = "^2.2"
+zvariant = "^3.2"
+logind-zbus = { version = "^3.0" } #, default-features = false, features = ["non_blocking"] }
 
 # serialisation
 serde = "^1.0"
 serde_derive = "^1.0"
 serde_json = "^1.0"
-toml = "0.4.6"
+toml = "^0.5.8"
 
 # Device control
 sysfs-class = "^0.1.2" # used for backlight control and baord ID
-rog_fan_curve = { version = "0.1.5", features = ["serde"] }
-# cpu power management
-intel-pstate = "^0.2.1"
-
-yansi-term = "^0.1"

daemon/src/config.rs

@@ -0,0 +1,80 @@
+use log::{error, warn};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+use std::path::PathBuf;
+
+pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
+
+#[derive(Deserialize, Serialize)]
+pub struct Config {
+    /// Save charge limit for restoring on boot
+    pub bat_charge_limit: u8,
+}
+
+impl Config {
+    fn new() -> Self {
+        Config {
+            bat_charge_limit: 100,
+        }
+    }
+
+    /// `load` will attempt to read the config, and panic if the dir is missing
+    pub fn load() -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&PathBuf::from(CONFIG_PATH))
+            .unwrap_or_else(|e| panic!("Error opening {}, {}", CONFIG_PATH, e)); // okay to cause panic here
+        let mut buf = String::new();
+        let config;
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                config = Self::new();
+            } else if let Ok(data) = serde_json::from_str(&buf) {
+                config = data;
+            } else {
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    CONFIG_PATH, CONFIG_PATH
+                );
+                let cfg_old = CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        CONFIG_PATH, err
+                    )
+                });
+                config = Self::new();
+            }
+        } else {
+            config = Self::new()
+        }
+        config.write();
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", CONFIG_PATH);
+            } else {
+                *self = serde_json::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", CONFIG_PATH));
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(CONFIG_PATH).expect("Couldn't overwrite config");
+        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+}

daemon/src/ctrl_anime/config.rs

@@ -0,0 +1,272 @@
+use crate::VERSION;
+use log::{error, info, warn};
+use rog_anime::{error::AnimeError, ActionData, ActionLoader, AnimTime, Vec2};
+use rog_anime::{AnimeType, Fade};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+use std::time::Duration;
+
+pub static ANIME_CONFIG_PATH: &str = "/etc/asusd/anime.conf";
+pub static ANIME_CACHE_PATH: &str = "/etc/asusd/anime-cache.conf";
+
+#[derive(Deserialize, Serialize)]
+pub struct AnimeConfigV341 {
+    pub system: Option<ActionLoader>,
+    pub boot: Option<ActionLoader>,
+    pub suspend: Option<ActionLoader>,
+    pub shutdown: Option<ActionLoader>,
+}
+
+impl AnimeConfigV341 {
+    pub(crate) fn into_current(self) -> AnimeConfig {
+        AnimeConfig {
+            system: if let Some(ani) = self.system {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            boot: if let Some(ani) = self.boot {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            wake: if let Some(ani) = self.suspend {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            shutdown: if let Some(ani) = self.shutdown {
+                vec![ani]
+            } else {
+                vec![]
+            },
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        }
+    }
+}
+
+#[derive(Deserialize, Serialize)]
+pub struct AnimeConfigV352 {
+    pub system: Vec<ActionLoader>,
+    pub boot: Vec<ActionLoader>,
+    pub wake: Vec<ActionLoader>,
+    pub shutdown: Vec<ActionLoader>,
+    pub brightness: f32,
+}
+
+impl AnimeConfigV352 {
+    pub(crate) fn into_current(self) -> AnimeConfig {
+        AnimeConfig {
+            system: self.system,
+            boot: self.boot,
+            wake: self.wake,
+            shutdown: self.shutdown,
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        }
+    }
+}
+
+#[derive(Deserialize, Serialize, Default)]
+pub struct AnimeConfigCached {
+    pub system: Vec<ActionData>,
+    pub boot: Vec<ActionData>,
+    pub wake: Vec<ActionData>,
+    pub shutdown: Vec<ActionData>,
+}
+
+impl AnimeConfigCached {
+    pub fn init_from_config(
+        &mut self,
+        config: &AnimeConfig,
+        anime_type: AnimeType,
+    ) -> Result<(), AnimeError> {
+        let mut sys = Vec::with_capacity(config.system.len());
+        for ani in config.system.iter() {
+            sys.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.system = sys;
+
+        let mut boot = Vec::with_capacity(config.boot.len());
+        for ani in config.boot.iter() {
+            boot.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.boot = boot;
+
+        let mut wake = Vec::with_capacity(config.wake.len());
+        for ani in config.wake.iter() {
+            wake.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.wake = wake;
+
+        let mut shutdown = Vec::with_capacity(config.shutdown.len());
+        for ani in config.shutdown.iter() {
+            shutdown.push(ActionData::from_anime_action(anime_type, ani)?);
+        }
+        self.shutdown = shutdown;
+        Ok(())
+    }
+}
+
+/// Config for base system actions for the anime display
+#[derive(Deserialize, Serialize)]
+pub struct AnimeConfig {
+    pub system: Vec<ActionLoader>,
+    pub boot: Vec<ActionLoader>,
+    pub wake: Vec<ActionLoader>,
+    pub shutdown: Vec<ActionLoader>,
+    pub brightness: f32,
+    pub awake_enabled: bool,
+    pub boot_anim_enabled: bool,
+}
+
+impl Default for AnimeConfig {
+    fn default() -> Self {
+        AnimeConfig {
+            system: Vec::new(),
+            boot: Vec::new(),
+            wake: Vec::new(),
+            shutdown: Vec::new(),
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        }
+    }
+}
+
+impl AnimeConfig {
+    /// `load` will attempt to read the config, and panic if the dir is missing
+    pub fn load() -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&ANIME_CONFIG_PATH)
+            .unwrap_or_else(|_| {
+                panic!(
+                    "The file {} or directory /etc/asusd/ is missing",
+                    ANIME_CONFIG_PATH
+                )
+            }); // okay to cause panic here
+        let mut buf = String::new();
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                return AnimeConfig::create_default(&mut file);
+            } else {
+                if let Ok(mut data) = serde_json::from_str(&buf) {
+                    Self::clamp_config_brightness(&mut data);
+                    return data;
+                } else if let Ok(data) = serde_json::from_str::<AnimeConfigV341>(&buf) {
+                    let mut config = data.into_current();
+                    config.write();
+                    info!("Updated config version to: {}", VERSION);
+                    Self::clamp_config_brightness(&mut config);
+                    return config;
+                } else if let Ok(data) = serde_json::from_str::<AnimeConfigV352>(&buf) {
+                    let mut config = data.into_current();
+                    config.write();
+                    info!("Updated config version to: {}", VERSION);
+                    Self::clamp_config_brightness(&mut config);
+                    return config;
+                }
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    ANIME_CONFIG_PATH, ANIME_CONFIG_PATH
+                );
+                let cfg_old = ANIME_CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(ANIME_CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        ANIME_CONFIG_PATH, err
+                    )
+                });
+            }
+        }
+        AnimeConfig::create_default(&mut file)
+    }
+
+    fn clamp_config_brightness(mut config: &mut AnimeConfig) {
+        if config.brightness < 0.0 || config.brightness > 1.0 {
+            warn!(
+                "Clamped brightness to [0.0 ; 1.0], was {}",
+                config.brightness
+            );
+            config.brightness = f32::max(0.0, f32::min(1.0, config.brightness));
+        }
+    }
+
+    fn create_default(file: &mut File) -> Self {
+        // create a default config here
+        let config = AnimeConfig {
+            system: vec![],
+            boot: vec![ActionLoader::ImageAnimation {
+                file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                scale: 0.9,
+                angle: 0.65,
+                translation: Vec2::default(),
+                brightness: 1.0,
+                time: AnimTime::Fade(Fade::new(
+                    Duration::from_secs(2),
+                    Some(Duration::from_secs(2)),
+                    Duration::from_secs(2),
+                )),
+            }],
+            wake: vec![ActionLoader::ImageAnimation {
+                file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                scale: 0.9,
+                angle: 0.65,
+                translation: Vec2::default(),
+                brightness: 1.0,
+                time: AnimTime::Fade(Fade::new(
+                    Duration::from_secs(2),
+                    Some(Duration::from_secs(2)),
+                    Duration::from_secs(2),
+                )),
+            }],
+            shutdown: vec![ActionLoader::ImageAnimation {
+                file: "/usr/share/asusd/anime/custom/sonic-wait.gif".into(),
+                scale: 0.9,
+                angle: 0.0,
+                translation: Vec2::new(3.0, 2.0),
+                brightness: 1.0,
+                time: AnimTime::Infinite,
+            }],
+            brightness: 1.0,
+            awake_enabled: true,
+            boot_anim_enabled: true,
+        };
+        // Should be okay to unwrap this as is since it is a Default
+        let json = serde_json::to_string_pretty(&config).unwrap();
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|_| panic!("Could not write {}", ANIME_CONFIG_PATH));
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&ANIME_CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", ANIME_CONFIG_PATH, err));
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", ANIME_CONFIG_PATH);
+            } else {
+                let x: AnimeConfig = serde_json::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", ANIME_CONFIG_PATH));
+                *self = x;
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(ANIME_CONFIG_PATH).expect("Couldn't overwrite config");
+        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+}

daemon/src/ctrl_anime/mod.rs

@@ -0,0 +1,375 @@
+pub mod config;
+pub mod zbus;
+
+use ::zbus::Connection;
+use async_trait::async_trait;
+use log::{error, info, warn};
+use logind_zbus::manager::ManagerProxy;
+use rog_anime::{
+    error::AnimeError,
+    usb::{
+        find_node, get_anime_type, pkt_for_apply, pkt_for_flush, pkt_for_set_boot, pkt_for_set_on,
+        pkts_for_init, PROD_ID, VENDOR_ID,
+    },
+    ActionData, AnimeDataBuffer, AnimePacketType, AnimeType,
+};
+use rog_supported::AnimeSupportedFunctions;
+use rusb::{Device, DeviceHandle};
+use smol::{stream::StreamExt, Executor};
+use std::{
+    cell::RefCell,
+    error::Error,
+    sync::{Arc, Mutex, MutexGuard},
+    thread::sleep,
+};
+use std::{
+    sync::atomic::{AtomicBool, Ordering},
+    time::Duration,
+};
+
+use crate::{error::RogError, GetSupported};
+
+use self::config::{AnimeConfig, AnimeConfigCached};
+
+impl GetSupported for CtrlAnime {
+    type A = AnimeSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        AnimeSupportedFunctions(CtrlAnime::get_device(VENDOR_ID, PROD_ID).is_ok())
+    }
+}
+
+pub struct CtrlAnime {
+    _node: String,
+    anime_type: AnimeType,
+    handle: RefCell<DeviceHandle<rusb::GlobalContext>>,
+    cache: AnimeConfigCached,
+    config: AnimeConfig,
+    // set to force thread to exit
+    thread_exit: Arc<AtomicBool>,
+    // Set to false when the thread exits
+    thread_running: Arc<AtomicBool>,
+}
+
+impl CtrlAnime {
+    #[inline]
+    pub fn new(config: AnimeConfig) -> Result<CtrlAnime, Box<dyn Error>> {
+        let node = find_node("193b")?;
+        let anime_type = get_anime_type()?;
+        let device = Self::get_dev_handle()?;
+
+        info!("Device has an AniMe Matrix display");
+        let mut cache = AnimeConfigCached::default();
+        cache.init_from_config(&config, anime_type)?;
+
+        let ctrl = CtrlAnime {
+            _node: node,
+            anime_type,
+            handle: RefCell::new(device),
+            cache,
+            config,
+            thread_exit: Arc::new(AtomicBool::new(false)),
+            thread_running: Arc::new(AtomicBool::new(false)),
+        };
+        ctrl.do_initialization();
+
+        Ok(ctrl)
+    }
+
+    fn get_dev_handle() -> Result<DeviceHandle<rusb::GlobalContext>, Box<dyn Error>> {
+        // We don't expect this ID to ever change
+        let device = CtrlAnime::get_device(0x0b05, 0x193b)?;
+
+        let mut device = device.open()?;
+        device.reset()?;
+
+        device.set_auto_detach_kernel_driver(true).map_err(|err| {
+            error!("Auto-detach kernel driver failed: {}", err);
+            err
+        })?;
+
+        device.claim_interface(0).map_err(|err| {
+            error!("Could not claim device interface: {}", err);
+            err
+        })?;
+
+        Ok(device)
+    }
+
+    fn get_device(vendor: u16, product: u16) -> Result<Device<rusb::GlobalContext>, rusb::Error> {
+        for device in rusb::devices()?.iter() {
+            let device_desc = device.device_descriptor()?;
+            if device_desc.vendor_id() == vendor && device_desc.product_id() == product {
+                return Ok(device);
+            }
+        }
+        Err(rusb::Error::NoDevice)
+    }
+
+    /// Start an action thread. This is classed as a singleton and there should be only
+    /// one running - so the thread uses atomics to signal run/exit.
+    ///
+    /// Because this also writes to the usb device, other write tries (display only) *must*
+    /// get the mutex lock and set the thread_exit atomic.
+    fn run_thread(inner: Arc<Mutex<CtrlAnime>>, actions: Vec<ActionData>, mut once: bool) {
+        if actions.is_empty() {
+            warn!("AniMe system actions was empty");
+            return;
+        }
+
+        // Loop rules:
+        // - Lock the mutex **only when required**. That is, the lock must be held for the shortest duration possible.
+        // - An AtomicBool used for thread exit should be checked in every loop, including nested
+
+        // The only reason for this outer thread is to prevent blocking while waiting for the
+        // next spawned thread to exit
+        std::thread::Builder::new()
+            .name("AniMe system thread start".into())
+            .spawn(move || {
+                info!("AniMe new system thread started");
+                // Getting copies of these Atomics is done *in* the thread to ensure
+                // we don't block other threads/main
+                let thread_exit;
+                let thread_running;
+                let anime_type;
+                loop {
+                    if let Ok(lock) = inner.try_lock() {
+                        thread_exit = lock.thread_exit.clone();
+                        thread_running = lock.thread_running.clone();
+                        anime_type = lock.anime_type;
+                        break;
+                    }
+                }
+                // First two loops are to ensure we *do* aquire a lock on the mutex
+                // The reason the loop is required is because the USB writes can block
+                // for up to 10ms. We can't fail to get the atomics.
+                while thread_running.load(Ordering::SeqCst) {
+                    // Make any running loop exit first
+                    thread_exit.store(true, Ordering::SeqCst);
+                }
+
+                info!("AniMe no previous system thread running (now)");
+                thread_exit.store(false, Ordering::SeqCst);
+
+                'main: loop {
+                    thread_running.store(true, Ordering::SeqCst);
+                    for action in actions.iter() {
+                        if thread_exit.load(Ordering::SeqCst) {
+                            break 'main;
+                        }
+                        match action {
+                            ActionData::Animation(frames) => {
+                                if let Err(err) = rog_anime::run_animation(frames, &|frame| {
+                                    if thread_exit.load(Ordering::Acquire) {
+                                        info!("rog-anime: frame-loop was asked to exit");
+                                        return Ok(true); // Do safe exit
+                                    }
+                                    inner
+                                        .try_lock()
+                                        .map(|lock| {
+                                            lock.write_data_buffer(frame);
+                                            false // Don't exit yet
+                                        })
+                                        .map_err(|err| {
+                                            warn!("rog_anime::run_animation:callback {}", err);
+                                            AnimeError::NoFrames
+                                        })
+                                }) {
+                                    warn!("rog_anime::run_animation:Animation {}", err);
+                                    break 'main;
+                                };
+                            }
+                            ActionData::Image(image) => {
+                                once = false;
+                                if let Ok(lock) = inner.try_lock() {
+                                    lock.write_data_buffer(image.as_ref().clone())
+                                }
+                            }
+                            ActionData::Pause(duration) => sleep(*duration),
+                            ActionData::AudioEq => {}
+                            ActionData::SystemInfo => {}
+                            ActionData::TimeDate => {}
+                            ActionData::Matrix => {}
+                        }
+                    }
+                    if thread_exit.load(Ordering::SeqCst) {
+                        break 'main;
+                    }
+                    if once || actions.is_empty() {
+                        break 'main;
+                    }
+                }
+                // Clear the display on exit
+                if let Ok(lock) = inner.try_lock() {
+                    let data =
+                        AnimeDataBuffer::from_vec(anime_type, vec![0u8; anime_type.data_length()]);
+                    lock.write_data_buffer(data);
+                }
+                // Loop ended, set the atmonics
+                thread_running.store(false, Ordering::SeqCst);
+                info!("AniMe system thread exited");
+            })
+            .map(|err| info!("AniMe system thread: {:?}", err))
+            .ok();
+    }
+
+    fn write_bytes(&self, message: &[u8]) {
+        // if let Ok(mut file) = OpenOptions::new().write(true).open(&self.node) {
+        //     println!("write: {:02x?}", &message);
+        //     return file
+        //         .write_all(message).unwrap();
+        // }
+        let mut error = false;
+
+        match self.handle.borrow().write_control(
+            0x21,  // request_type
+            0x09,  // request
+            0x35e, // value
+            0x00,  // index
+            message,
+            Duration::from_millis(200),
+        ) {
+            Ok(_) => {}
+            Err(err) => match err {
+                rusb::Error::Timeout => {}
+                _ => {
+                    error = true;
+                    error!("Failed to write to led interrupt: {}", err);
+                }
+            },
+        }
+
+        if error {
+            warn!("Will attempt to get AniMe device handle again");
+            match Self::get_dev_handle() {
+                Ok(dev) => {
+                    self.handle.replace(dev);
+                }
+                Err(err) => {
+                    error!("Failed to get AniMe device: {}", err);
+                }
+            }
+        }
+    }
+
+    /// Write only a data packet. This will modify the leds brightness using the
+    /// global brightness set in config.
+    fn write_data_buffer(&self, mut buffer: AnimeDataBuffer) {
+        for led in buffer.data_mut()[7..].iter_mut() {
+            let mut bright = *led as f32 * self.config.brightness;
+            if bright > 254.0 {
+                bright = 254.0;
+            }
+            *led = bright as u8;
+        }
+        let data = AnimePacketType::from(buffer);
+        for row in data.iter() {
+            self.write_bytes(row);
+        }
+        self.write_bytes(&pkt_for_flush());
+    }
+
+    fn do_initialization(&self) {
+        let pkts = pkts_for_init();
+        self.write_bytes(&pkts[0]);
+        self.write_bytes(&pkts[1]);
+    }
+}
+
+pub struct CtrlAnimeTask {
+    inner: Arc<Mutex<CtrlAnime>>,
+}
+
+impl CtrlAnimeTask {
+    pub async fn new(inner: Arc<Mutex<CtrlAnime>>) -> CtrlAnimeTask {
+        Self { inner }
+    }
+}
+
+#[async_trait]
+impl crate::CtrlTask for CtrlAnimeTask {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let connection = Connection::system()
+            .await
+            .expect("CtrlAnimeTask could not create dbus connection");
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlAnimeTask could not create ManagerProxy");
+
+        let run_action =
+            |start: bool, lock: MutexGuard<CtrlAnime>, inner: Arc<Mutex<CtrlAnime>>| {
+                if start {
+                    info!("CtrlAnimeTask running sleep animation");
+                    CtrlAnime::run_thread(inner.clone(), lock.cache.shutdown.clone(), true);
+                } else {
+                    info!("CtrlAnimeTask running wake animation");
+                    CtrlAnime::run_thread(inner.clone(), lock.cache.wake.clone(), true);
+                }
+            };
+
+        let inner = self.inner.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_sleep().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                // Loop is required to try an attempt to get the mutex *without* blocking
+                                // other threads - it is possible to end up with deadlocks otherwise.
+                                loop {
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        run_action(args.start, lock, inner.clone());
+                                        break;
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlAnimeTask could not create ManagerProxy");
+
+        let inner = self.inner.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_shutdown().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                loop {
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        run_action(args.start, lock, inner.clone());
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+
+        Ok(())
+    }
+}
+
+pub struct CtrlAnimeReloader(pub Arc<Mutex<CtrlAnime>>);
+
+impl crate::Reloadable for CtrlAnimeReloader {
+    fn reload(&mut self) -> Result<(), RogError> {
+        if let Ok(lock) = self.0.try_lock() {
+            lock.write_bytes(&pkt_for_set_on(lock.config.awake_enabled));
+            lock.write_bytes(&pkt_for_apply());
+            lock.write_bytes(&pkt_for_set_boot(lock.config.boot_anim_enabled));
+            lock.write_bytes(&pkt_for_apply());
+
+            let action = lock.cache.boot.clone();
+            CtrlAnime::run_thread(self.0.clone(), action, true);
+        }
+        Ok(())
+    }
+}

daemon/src/ctrl_anime/zbus.rs

@@ -0,0 +1,140 @@
+use std::sync::{Arc, Mutex};
+
+use async_trait::async_trait;
+use rog_anime::{
+    usb::{pkt_for_apply, pkt_for_set_boot, pkt_for_set_on},
+    AnimeDataBuffer, AnimePowerStates,
+};
+use zbus::{dbus_interface, Connection, SignalContext};
+
+use std::sync::atomic::Ordering;
+
+use super::CtrlAnime;
+
+pub struct CtrlAnimeZbus(pub Arc<Mutex<CtrlAnime>>);
+
+/// The struct with the main dbus methods requires this trait
+#[async_trait]
+impl crate::ZbusAdd for CtrlAnimeZbus {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Anime", server).await;
+    }
+}
+
+// None of these calls can be guarnateed to succeed unless we loop until okay
+// If the try_lock *does* succeed then any other thread trying to lock will not grab it
+// until we finish.
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlAnimeZbus {
+    /// Writes a data stream of length. Will force system thread to exit until it is restarted
+    fn write(&self, input: AnimeDataBuffer) {
+        'outer: loop {
+            if let Ok(lock) = self.0.try_lock() {
+                lock.thread_exit.store(true, Ordering::SeqCst);
+                lock.write_data_buffer(input);
+                break 'outer;
+            }
+        }
+    }
+
+    /// Set the global AniMe brightness
+    fn set_brightness(&self, bright: f32) {
+        'outer: loop {
+            if let Ok(mut lock) = self.0.try_lock() {
+                let mut bright = bright;
+                if bright < 0.0 {
+                    bright = 0.0
+                } else if bright > 1.0 {
+                    bright = 1.0;
+                }
+                lock.config.brightness = bright;
+                lock.config.write();
+                break 'outer;
+            }
+        }
+    }
+
+    /// Set whether the AniMe is displaying images/data
+    async fn set_on_off(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>, status: bool) {
+        let states;
+        'outer: loop {
+            if let Ok(mut lock) = self.0.try_lock() {
+                lock.write_bytes(&pkt_for_set_on(status));
+                lock.config.awake_enabled = status;
+                lock.config.write();
+
+                states = Some(AnimePowerStates {
+                    brightness: lock.config.brightness.floor() as u8,
+                    enabled: lock.config.awake_enabled,
+                    boot_anim_enabled: lock.config.boot_anim_enabled,
+                });
+                break 'outer;
+            }
+        }
+        if let Some(state) = states {
+            Self::notify_power_states(&ctxt, state).await.ok();
+        }
+    }
+
+    /// Set whether the AniMe will show boot, suspend, or off animations
+    async fn set_boot_on_off(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>, on: bool) {
+        let states;
+        'outer: loop {
+            if let Ok(mut lock) = self.0.try_lock() {
+                lock.write_bytes(&pkt_for_set_boot(on));
+                lock.write_bytes(&pkt_for_apply());
+                lock.config.boot_anim_enabled = on;
+                lock.config.write();
+
+                states = Some(AnimePowerStates {
+                    brightness: lock.config.brightness.floor() as u8,
+                    enabled: lock.config.awake_enabled,
+                    boot_anim_enabled: lock.config.boot_anim_enabled,
+                });
+                break 'outer;
+            }
+        }
+        if let Some(state) = states {
+            Self::notify_power_states(&ctxt, state).await.ok();
+        }
+    }
+
+    /// The main loop is the base system set action if the user isn't running
+    /// the user daemon
+    fn run_main_loop(&self, start: bool) {
+        if start {
+            'outer: loop {
+                if let Ok(lock) = self.0.try_lock() {
+                    lock.thread_exit.store(true, Ordering::SeqCst);
+                    CtrlAnime::run_thread(self.0.clone(), lock.cache.system.clone(), false);
+                    break 'outer;
+                }
+            }
+        }
+    }
+
+    /// Get status of if the AniMe LEDs are on/displaying while system is awake
+    #[dbus_interface(property)]
+    fn awake_enabled(&self) -> bool {
+        if let Ok(ctrl) = self.0.try_lock() {
+            return ctrl.config.awake_enabled;
+        }
+        true
+    }
+
+    /// Get the status of if factory system-status animations are enabled
+    #[dbus_interface(property)]
+    fn boot_enabled(&self) -> bool {
+        if let Ok(ctrl) = self.0.try_lock() {
+            return ctrl.config.boot_anim_enabled;
+        }
+        true
+    }
+
+    /// Notify listeners of the status of AniMe LED power and factory system-status animations
+    #[dbus_interface(signal)]
+    async fn notify_power_states(
+        ctxt: &SignalContext<'_>,
+        data: AnimePowerStates,
+    ) -> zbus::Result<()>;
+}

daemon/src/ctrl_aura/config.rs

@@ -0,0 +1,157 @@
+use crate::laptops::LaptopLedData;
+use log::{error, warn};
+use rog_aura::usb::AuraControl;
+use rog_aura::{AuraEffect, AuraModeNum, AuraZone, LedBrightness};
+use serde_derive::{Deserialize, Serialize};
+use std::collections::{BTreeMap, HashSet};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+
+pub static AURA_CONFIG_PATH: &str = "/etc/asusd/aura.conf";
+
+#[derive(Deserialize, Serialize)]
+#[serde(default)]
+pub struct AuraConfig {
+    pub brightness: LedBrightness,
+    pub current_mode: AuraModeNum,
+    pub builtins: BTreeMap<AuraModeNum, AuraEffect>,
+    pub multizone: Option<BTreeMap<AuraModeNum, Vec<AuraEffect>>>,
+    pub enabled: HashSet<AuraControl>,
+}
+
+impl Default for AuraConfig {
+    fn default() -> Self {
+        AuraConfig {
+            brightness: LedBrightness::Med,
+            current_mode: AuraModeNum::Static,
+            builtins: BTreeMap::new(),
+            multizone: None,
+            enabled: HashSet::from([
+                AuraControl::BootLogo,
+                AuraControl::BootKeyb,
+                AuraControl::SleepLogo,
+                AuraControl::SleepKeyb,
+                AuraControl::AwakeLogo,
+                AuraControl::AwakeKeyb,
+                AuraControl::ShutdownLogo,
+                AuraControl::ShutdownKeyb,
+                AuraControl::AwakeBar,
+                AuraControl::BootBar,
+                AuraControl::SleepBar,
+                AuraControl::ShutdownBar,
+            ]),
+        }
+    }
+}
+
+impl AuraConfig {
+    /// `load` will attempt to read the config, and panic if the dir is missing
+    pub fn load(supported_led_modes: &LaptopLedData) -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&AURA_CONFIG_PATH)
+            .unwrap_or_else(|_| {
+                panic!(
+                    "The file {} or directory /etc/asusd/ is missing",
+                    AURA_CONFIG_PATH
+                )
+            }); // okay to cause panic here
+        let mut buf = String::new();
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                return AuraConfig::create_default(&mut file, supported_led_modes);
+            } else {
+                if let Ok(data) = serde_json::from_str(&buf) {
+                    return data;
+                }
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    AURA_CONFIG_PATH, AURA_CONFIG_PATH
+                );
+                let cfg_old = AURA_CONFIG_PATH.to_string() + "-old";
+                std::fs::rename(AURA_CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        AURA_CONFIG_PATH, err
+                    )
+                });
+            }
+        }
+        AuraConfig::create_default(&mut file, supported_led_modes)
+    }
+
+    fn create_default(file: &mut File, support_data: &LaptopLedData) -> Self {
+        // create a default config here
+        let mut config = AuraConfig::default();
+
+        for n in &support_data.standard {
+            config
+                .builtins
+                .insert(*n, AuraEffect::default_with_mode(*n));
+        }
+
+        // Should be okay to unwrap this as is since it is a Default
+        let json = serde_json::to_string(&config).unwrap();
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|_| panic!("Could not write {}", AURA_CONFIG_PATH));
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&AURA_CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", AURA_CONFIG_PATH, err));
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", AURA_CONFIG_PATH);
+            } else {
+                let x: AuraConfig = serde_json::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", AURA_CONFIG_PATH));
+                *self = x;
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(AURA_CONFIG_PATH).expect("Couldn't overwrite config");
+        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+
+    /// Multipurpose, will accept AuraEffect with zones and put in the correct store
+    pub fn set_builtin(&mut self, effect: AuraEffect) {
+        match effect.zone() {
+            AuraZone::None => {
+                self.builtins.insert(*effect.mode(), effect);
+            }
+            _ => {
+                if let Some(multi) = self.multizone.as_mut() {
+                    if let Some(fx) = multi.get_mut(effect.mode()) {
+                        for fx in fx.iter_mut() {
+                            if fx.mode == effect.mode {
+                                *fx = effect;
+                                break;
+                            }
+                        }
+                    } else {
+                        let mut tmp = BTreeMap::new();
+                        tmp.insert(*effect.mode(), vec![effect]);
+                        self.multizone = Some(tmp);
+                    }
+                }
+            }
+        }
+    }
+
+    pub fn get_multizone(&self, aura_type: AuraModeNum) -> Option<&[AuraEffect]> {
+        if let Some(multi) = &self.multizone {
+            return multi.get(&aura_type).map(|v| v.as_slice());
+        }
+        None
+    }
+}

daemon/src/ctrl_aura/controller.rs

@@ -0,0 +1,449 @@
+// Only these two packets must be 17 bytes
+static KBD_BRIGHT_PATH: &str = "/sys/class/leds/asus::kbd_backlight/brightness";
+
+use crate::{
+    error::RogError,
+    laptops::{LaptopLedData, ASUS_KEYBOARD_DEVICES},
+    CtrlTask,
+};
+use async_trait::async_trait;
+use log::{error, info, warn};
+use logind_zbus::manager::ManagerProxy;
+use rog_aura::usb::AuraControl;
+use rog_aura::{
+    usb::{LED_APPLY, LED_SET},
+    AuraEffect, LedBrightness, LED_MSG_LEN,
+};
+use rog_supported::LedSupportedFunctions;
+use smol::{stream::StreamExt, Executor};
+use std::io::{Read, Write};
+use std::path::Path;
+use std::sync::Arc;
+use std::sync::Mutex;
+use std::{fs::OpenOptions, sync::MutexGuard};
+use zbus::Connection;
+
+use crate::GetSupported;
+
+use super::config::AuraConfig;
+
+impl GetSupported for CtrlKbdLed {
+    type A = LedSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        // let mode = <&str>::from(&<AuraModes>::from(*mode));
+        let laptop = LaptopLedData::get_data();
+        let stock_led_modes = laptop.standard;
+        let multizone_led_mode = laptop.multizone;
+        let per_key_led_mode = laptop.per_key;
+
+        LedSupportedFunctions {
+            brightness_set: CtrlKbdLed::get_kbd_bright_path().is_some(),
+            stock_led_modes,
+            multizone_led_mode,
+            per_key_led_mode,
+        }
+    }
+}
+
+pub struct CtrlKbdLed {
+    pub led_node: Option<String>,
+    pub bright_node: String,
+    pub supported_modes: LaptopLedData,
+    pub flip_effect_write: bool,
+    pub config: AuraConfig,
+}
+
+pub struct CtrlKbdLedTask {
+    inner: Arc<Mutex<CtrlKbdLed>>,
+}
+
+impl CtrlKbdLedTask {
+    pub fn new(inner: Arc<Mutex<CtrlKbdLed>>) -> Self {
+        Self { inner }
+    }
+
+    fn update_config(lock: &mut CtrlKbdLed) -> Result<(), RogError> {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&lock.bright_node)
+            .map_err(|err| match err.kind() {
+                std::io::ErrorKind::NotFound => {
+                    RogError::MissingLedBrightNode((&lock.bright_node).into(), err)
+                }
+                _ => RogError::Path((&lock.bright_node).into(), err),
+            })?;
+        let mut buf = [0u8; 1];
+        file.read_exact(&mut buf)
+            .map_err(|err| RogError::Read("buffer".into(), err))?;
+        if let Some(num) = char::from(buf[0]).to_digit(10) {
+            if lock.config.brightness != num.into() {
+                lock.config.read();
+                lock.config.brightness = num.into();
+                lock.config.write();
+            }
+            return Ok(());
+        }
+        Err(RogError::ParseLed)
+    }
+}
+
+#[async_trait]
+impl CtrlTask for CtrlKbdLedTask {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let connection = Connection::system()
+            .await
+            .expect("CtrlKbdLedTask could not create dbus connection");
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlKbdLedTask could not create ManagerProxy");
+
+        let load_save = |start: bool, mut lock: MutexGuard<CtrlKbdLed>| {
+            // If waking up
+            if !start {
+                info!("CtrlKbdLedTask reloading brightness and modes");
+                lock.set_brightness(lock.config.brightness)
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+                if let Some(mode) = lock.config.builtins.get(&lock.config.current_mode) {
+                    lock.write_mode(mode)
+                        .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                        .ok();
+                }
+            } else if start {
+                info!("CtrlKbdLedTask saving last brightness");
+                Self::update_config(&mut lock)
+                    .map_err(|e| error!("CtrlKbdLedTask: {e}"))
+                    .ok();
+            }
+        };
+
+        let inner = self.inner.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_sleep().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                loop {
+                                    // Loop so that we do aquire the lock but also don't block other
+                                    // threads (prevents potential deadlocks)
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        load_save(args.start, lock);
+                                        break;
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+                if let Ok(notif) = manager.receive_prepare_for_shutdown().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                loop {
+                                    if let Ok(lock) = inner.clone().try_lock() {
+                                        load_save(args.start, lock);
+                                        break;
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+
+        // let inner = self.inner.clone();
+        // self.repeating_task(500, executor, move || loop {
+        //     if let Ok(ref mut lock) = inner.try_lock() {
+        //         Self::update_config(lock).unwrap();
+        //         break;
+        //     }
+        // })
+        // .await;
+        Ok(())
+    }
+}
+
+pub struct CtrlKbdLedReloader(pub Arc<Mutex<CtrlKbdLed>>);
+
+impl crate::Reloadable for CtrlKbdLedReloader {
+    fn reload(&mut self) -> Result<(), RogError> {
+        if let Ok(mut ctrl) = self.0.try_lock() {
+            let current = ctrl.config.current_mode;
+            if let Some(mode) = ctrl.config.builtins.get(&current).cloned() {
+                ctrl.do_command(mode).ok();
+            }
+
+            ctrl.set_power_states(&ctrl.config)
+                .map_err(|err| warn!("{err}"))
+                .ok();
+        }
+        Ok(())
+    }
+}
+
+pub struct CtrlKbdLedZbus(pub Arc<Mutex<CtrlKbdLed>>);
+
+impl CtrlKbdLedZbus {
+    pub fn new(inner: Arc<Mutex<CtrlKbdLed>>) -> Self {
+        Self(inner)
+    }
+}
+
+impl CtrlKbdLed {
+    #[inline]
+    pub fn new(supported_modes: LaptopLedData, config: AuraConfig) -> Result<Self, RogError> {
+        // TODO: return error if *all* nodes are None
+        let mut led_node = None;
+        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+            match Self::find_led_node(prod) {
+                Ok(node) => {
+                    led_node = Some(node);
+                    info!("Looked for keyboard controller 0x{prod}: Found");
+                    break;
+                }
+                Err(err) => info!("Looked for keyboard controller 0x{prod}: {err}"),
+            }
+        }
+
+        let bright_node = Self::get_kbd_bright_path();
+
+        if led_node.is_none() && bright_node.is_none() {
+            return Err(RogError::MissingFunction(
+                "All keyboard features missing, you may require a v5.11 series kernel or newer"
+                    .into(),
+            ));
+        }
+
+        if bright_node.is_none() {
+            return Err(RogError::MissingFunction(
+                "No brightness control, you may require a v5.11 series kernel or newer".into(),
+            ));
+        }
+
+        let ctrl = CtrlKbdLed {
+            led_node,
+            bright_node: bright_node.unwrap(), // If was none then we already returned above
+            supported_modes,
+            flip_effect_write: false,
+            config,
+        };
+        Ok(ctrl)
+    }
+
+    fn get_kbd_bright_path() -> Option<String> {
+        if Path::new(KBD_BRIGHT_PATH).exists() {
+            return Some(KBD_BRIGHT_PATH.to_string());
+        }
+        None
+    }
+
+    pub(super) fn get_brightness(&self) -> Result<u8, RogError> {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&self.bright_node)
+            .map_err(|err| match err.kind() {
+                std::io::ErrorKind::NotFound => {
+                    RogError::MissingLedBrightNode((&self.bright_node).into(), err)
+                }
+                _ => RogError::Path((&self.bright_node).into(), err),
+            })?;
+        let mut buf = [0u8; 1];
+        file.read_exact(&mut buf)
+            .map_err(|err| RogError::Read("buffer".into(), err))?;
+        Ok(buf[0])
+    }
+
+    pub(super) fn set_brightness(&self, brightness: LedBrightness) -> Result<(), RogError> {
+        let path = Path::new(&self.bright_node);
+        let mut file =
+            OpenOptions::new()
+                .write(true)
+                .open(&path)
+                .map_err(|err| match err.kind() {
+                    std::io::ErrorKind::NotFound => {
+                        RogError::MissingLedBrightNode((&self.bright_node).into(), err)
+                    }
+                    _ => RogError::Path((&self.bright_node).into(), err),
+                })?;
+        file.write_all(&[brightness.as_char_code()])
+            .map_err(|err| RogError::Read("buffer".into(), err))?;
+        Ok(())
+    }
+
+    pub fn next_brightness(&mut self) -> Result<(), RogError> {
+        let mut bright = (self.config.brightness as u32) + 1;
+        if bright > 3 {
+            bright = 0;
+        }
+        self.config.brightness = <LedBrightness>::from(bright);
+        self.config.write();
+        self.set_brightness(self.config.brightness)
+    }
+
+    pub fn prev_brightness(&mut self) -> Result<(), RogError> {
+        let mut bright = self.config.brightness as u32;
+        if bright == 0 {
+            bright = 3;
+        } else {
+            bright -= 1;
+        }
+        self.config.brightness = <LedBrightness>::from(bright);
+        self.config.write();
+        self.set_brightness(self.config.brightness)
+    }
+
+    /// Set combination state for boot animation/sleep animation/all leds/keys leds/side leds LED active
+    pub(super) fn set_power_states(&self, config: &AuraConfig) -> Result<(), RogError> {
+        let set: Vec<AuraControl> = config.enabled.iter().map(|v| *v).collect();
+        let bytes = AuraControl::to_bytes(&set);
+
+        // Quite ugly, must be a more idiomatic way to do
+        let message = [
+            0x5d, 0xbd, 0x01, bytes[0], bytes[1], 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        ];
+
+        self.write_bytes(&message)?;
+        self.write_bytes(&LED_SET)?;
+        // Changes won't persist unless apply is set
+        self.write_bytes(&LED_APPLY)?;
+        Ok(())
+    }
+
+    fn find_led_node(id_product: &str) -> Result<String, RogError> {
+        let mut enumerator = udev::Enumerator::new().map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("enumerator failed".into(), err)
+        })?;
+        enumerator.match_subsystem("hidraw").map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("match_subsystem failed".into(), err)
+        })?;
+
+        for device in enumerator.scan_devices().map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("scan_devices failed".into(), err)
+        })? {
+            if let Some(parent) = device
+                .parent_with_subsystem_devtype("usb", "usb_device")
+                .map_err(|err| {
+                    warn!("{}", err);
+                    RogError::Udev("parent_with_subsystem_devtype failed".into(), err)
+                })?
+            {
+                if parent
+                    .attribute_value("idProduct")
+                    .ok_or_else(|| RogError::NotFound("LED idProduct".into()))?
+                    == id_product
+                {
+                    if let Some(dev_node) = device.devnode() {
+                        info!("Using device at: {:?} for LED control", dev_node);
+                        return Ok(dev_node.to_string_lossy().to_string());
+                    }
+                }
+            }
+        }
+        Err(RogError::MissingFunction(
+            "ASUS LED device node not found".into(),
+        ))
+    }
+
+    pub(crate) fn do_command(&mut self, mode: AuraEffect) -> Result<(), RogError> {
+        self.set_and_save(mode)
+    }
+
+    /// Should only be used if the bytes you are writing are verified correct
+    #[inline]
+    fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
+        if let Some(led_node) = &self.led_node {
+            if let Ok(mut file) = OpenOptions::new().write(true).open(led_node) {
+                // println!("write: {:02x?}", &message);
+                return file
+                    .write_all(message)
+                    .map_err(|err| RogError::Write("write_bytes".into(), err));
+            }
+        }
+        Err(RogError::NotSupported)
+    }
+
+    /// Write an effect block
+    #[inline]
+    fn _write_effect(&mut self, effect: &[Vec<u8>]) -> Result<(), RogError> {
+        if self.flip_effect_write {
+            for row in effect.iter().rev() {
+                self.write_bytes(row)?;
+            }
+        } else {
+            for row in effect.iter() {
+                self.write_bytes(row)?;
+            }
+        }
+        self.flip_effect_write = !self.flip_effect_write;
+        Ok(())
+    }
+
+    /// Used to set a builtin mode and save the settings for it
+    ///
+    /// This needs to be universal so that settings applied by dbus stick
+    #[inline]
+    fn set_and_save(&mut self, mode: AuraEffect) -> Result<(), RogError> {
+        self.config.read();
+        self.write_mode(&mode)?;
+        self.config.current_mode = *mode.mode();
+        self.config.set_builtin(mode);
+        self.config.write();
+        Ok(())
+    }
+
+    #[inline]
+    pub(super) fn toggle_mode(&mut self, reverse: bool) -> Result<(), RogError> {
+        let current = self.config.current_mode;
+        if let Some(idx) = self
+            .supported_modes
+            .standard
+            .iter()
+            .position(|v| *v == current)
+        {
+            let mut idx = idx;
+            // goes past end of array
+            if reverse {
+                if idx == 0 {
+                    idx = self.supported_modes.standard.len() - 1;
+                } else {
+                    idx -= 1;
+                }
+            } else {
+                idx += 1;
+                if idx == self.supported_modes.standard.len() {
+                    idx = 0;
+                }
+            }
+            let next = self.supported_modes.standard[idx];
+
+            self.config.read();
+            if let Some(data) = self.config.builtins.get(&next) {
+                self.write_mode(data)?;
+                self.config.current_mode = next;
+            }
+            self.config.write();
+        }
+
+        Ok(())
+    }
+
+    #[inline]
+    fn write_mode(&self, mode: &AuraEffect) -> Result<(), RogError> {
+        if !self.supported_modes.standard.contains(mode.mode()) {
+            return Err(RogError::NotSupported);
+        }
+        let bytes: [u8; LED_MSG_LEN] = mode.into();
+        self.write_bytes(&bytes)?;
+        self.write_bytes(&LED_SET)?;
+        // Changes won't persist unless apply is set
+        self.write_bytes(&LED_APPLY)?;
+        Ok(())
+    }
+}

daemon/src/ctrl_aura/mod.rs

@@ -0,0 +1,3 @@
+pub mod config;
+pub mod controller;
+pub mod zbus;

daemon/src/ctrl_aura/zbus.rs

@@ -0,0 +1,225 @@
+use async_trait::async_trait;
+use log::warn;
+use rog_aura::{usb::AuraControl, AuraEffect, LedBrightness};
+use zbus::{dbus_interface, Connection, SignalContext};
+
+use super::controller::CtrlKbdLedZbus;
+
+#[async_trait]
+impl crate::ZbusAdd for CtrlKbdLedZbus {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Led", server).await;
+    }
+}
+
+/// The main interface for changing, reading, or notfying signals
+///
+/// LED commands are split between Brightness, Modes, Per-Key
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlKbdLedZbus {
+    /// Set the keyboard brightness level (0-3)
+    async fn set_brightness(&mut self, brightness: LedBrightness) {
+        if let Ok(ctrl) = self.0.try_lock() {
+            ctrl.set_brightness(brightness)
+                .map_err(|err| warn!("{}", err))
+                .ok();
+        }
+    }
+
+    /// Set a variety of states, input is array of enum.
+    ///
+    /// enum AuraControl {
+    ///     BootLogo,
+    ///     BootKeyb,
+    ///     AwakeLogo,
+    ///     AwakeKeyb,
+    ///     SleepLogo,
+    ///     SleepKeyb,
+    ///     ShutdownLogo,
+    ///     ShutdownKeyb,
+    ///     AwakeBar,
+    ///     BootBar,
+    ///     SleepBar,
+    ///     ShutdownBar,
+    /// }
+    async fn set_leds_enabled(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        enabled: Vec<AuraControl>,
+    ) {
+        let mut states = None;
+        if let Ok(mut ctrl) = self.0.try_lock() {
+            for s in enabled {
+                ctrl.config.enabled.insert(s);
+            }
+            ctrl.config.write();
+
+            ctrl.set_power_states(&ctrl.config)
+                .map_err(|err| warn!("{}", err))
+                .ok();
+
+            let set: Vec<AuraControl> = ctrl.config.enabled.iter().map(|v| *v).collect();
+            states = Some(set);
+        }
+        // Need to pull state out like this due to MutexGuard
+        if let Some(states) = states {
+            Self::notify_power_states(&ctxt, &states)
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+    }
+
+    async fn set_leds_disabled(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        disabled: Vec<AuraControl>,
+    ) {
+        let mut states = None;
+        if let Ok(mut ctrl) = self.0.try_lock() {
+            for s in disabled {
+                ctrl.config.enabled.remove(&s);
+            }
+            ctrl.config.write();
+
+            ctrl.set_power_states(&ctrl.config)
+                .map_err(|err| warn!("{}", err))
+                .ok();
+
+            let set: Vec<AuraControl> = ctrl.config.enabled.iter().map(|v| *v).collect();
+            states = Some(set);
+        }
+        // Need to pull state out like this due to MutexGuard
+        if let Some(states) = states {
+            Self::notify_power_states(&ctxt, &states)
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+    }
+
+    async fn set_led_mode(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        effect: AuraEffect,
+    ) {
+        let mut led = None;
+        if let Ok(mut ctrl) = self.0.try_lock() {
+            match ctrl.do_command(effect) {
+                Ok(_) => {
+                    if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+                        led = Some(mode.clone());
+                    }
+                }
+                Err(err) => {
+                    warn!("{}", err);
+                }
+            }
+        }
+        if let Some(led) = led {
+            Self::notify_led(&ctxt, led)
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+    }
+
+    async fn next_led_mode(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>) {
+        let mut led = None;
+        if let Ok(mut ctrl) = self.0.lock() {
+            ctrl.toggle_mode(false)
+                .unwrap_or_else(|err| warn!("{}", err));
+
+            if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+                led = Some(mode.clone());
+            }
+        }
+        if let Some(led) = led {
+            Self::notify_led(&ctxt, led)
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+    }
+
+    async fn prev_led_mode(&self, #[zbus(signal_context)] ctxt: SignalContext<'_>) {
+        let mut led = None;
+        if let Ok(mut ctrl) = self.0.lock() {
+            ctrl.toggle_mode(true)
+                .unwrap_or_else(|err| warn!("{}", err));
+
+            if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+                led = Some(mode.clone());
+            }
+        }
+        if let Some(led) = led {
+            Self::notify_led(&ctxt, led)
+                .await
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+    }
+
+    async fn next_led_brightness(&self) {
+        if let Ok(mut ctrl) = self.0.try_lock() {
+            ctrl.next_brightness()
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+    }
+
+    async fn prev_led_brightness(&self) {
+        if let Ok(mut ctrl) = self.0.try_lock() {
+            ctrl.prev_brightness()
+                .unwrap_or_else(|err| warn!("{}", err));
+        }
+    }
+
+    #[dbus_interface(property)]
+    async fn leds_enabled(&self) -> Vec<u8> {
+        if let Ok(ctrl) = self.0.try_lock() {
+            let set: Vec<AuraControl> = ctrl.config.enabled.iter().map(|v| *v).collect();
+            return AuraControl::to_bytes(&set).to_vec();
+        }
+        vec![0, 0]
+    }
+
+    /// Return the current mode data
+    #[dbus_interface(property)]
+    async fn led_mode(&self) -> String {
+        if let Ok(ctrl) = self.0.try_lock() {
+            if let Some(mode) = ctrl.config.builtins.get(&ctrl.config.current_mode) {
+                if let Ok(json) = serde_json::to_string(&mode) {
+                    return json;
+                }
+            }
+        }
+        warn!("SetKeyBacklight could not deserialise");
+        "SetKeyBacklight could not deserialise".to_string()
+    }
+
+    /// Return a list of available modes
+    #[dbus_interface(property)]
+    async fn led_modes(&self) -> String {
+        if let Ok(ctrl) = self.0.try_lock() {
+            if let Ok(json) = serde_json::to_string(&ctrl.config.builtins) {
+                return json;
+            }
+        }
+        warn!("SetKeyBacklight could not deserialise");
+        "SetKeyBacklight could not serialise".to_string()
+    }
+
+    /// Return the current LED brightness
+    #[dbus_interface(property)]
+    async fn led_brightness(&self) -> i8 {
+        if let Ok(ctrl) = self.0.try_lock() {
+            return ctrl.get_brightness().map(|n| n as i8).unwrap_or(-1);
+        }
+        warn!("SetKeyBacklight could not serialise");
+        -1
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_led(signal_ctxt: &SignalContext<'_>, data: AuraEffect) -> zbus::Result<()>;
+
+    #[dbus_interface(signal)]
+    async fn notify_power_states(
+        signal_ctxt: &SignalContext<'_>,
+        data: &[AuraControl],
+    ) -> zbus::Result<()>;
+}

daemon/src/ctrl_charge.rs

@@ -0,0 +1,201 @@
+use crate::CtrlTask;
+use crate::{config::Config, error::RogError, GetSupported};
+use async_trait::async_trait;
+use log::{info, warn};
+use logind_zbus::manager::ManagerProxy;
+use rog_supported::ChargeSupportedFunctions;
+use smol::stream::StreamExt;
+use smol::Executor;
+use std::fs::OpenOptions;
+use std::io::Write;
+use std::path::Path;
+use std::sync::Arc;
+use std::sync::Mutex;
+use zbus::dbus_interface;
+use zbus::Connection;
+use zbus::SignalContext;
+
+static BAT_CHARGE_PATH0: &str = "/sys/class/power_supply/BAT0/charge_control_end_threshold";
+static BAT_CHARGE_PATH1: &str = "/sys/class/power_supply/BAT1/charge_control_end_threshold";
+static BAT_CHARGE_PATH2: &str = "/sys/class/power_supply/BAT2/charge_control_end_threshold";
+
+impl GetSupported for CtrlCharge {
+    type A = ChargeSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        ChargeSupportedFunctions {
+            charge_level_set: CtrlCharge::get_battery_path().is_ok(),
+        }
+    }
+}
+
+pub struct CtrlCharge {
+    config: Arc<Mutex<Config>>,
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlCharge {
+    async fn set_limit(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        limit: u8,
+    ) -> zbus::fdo::Result<()> {
+        if !(20..=100).contains(&limit) {
+            return Err(RogError::ChargeLimit(limit))?;
+        }
+        if let Ok(mut config) = self.config.try_lock() {
+            Self::set(limit, &mut config)
+                .map_err(|err| {
+                    warn!("CtrlCharge: set_limit {}", err);
+                    err
+                })
+                .ok();
+        }
+        Self::notify_charge(&ctxt, limit).await?;
+        Ok(())
+    }
+
+    fn limit(&self) -> i8 {
+        if let Ok(config) = self.config.try_lock() {
+            return config.bat_charge_limit as i8;
+        }
+        -1
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_charge(ctxt: &SignalContext<'_>, limit: u8) -> zbus::Result<()>;
+}
+
+#[async_trait]
+impl crate::ZbusAdd for CtrlCharge {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Charge", server).await;
+    }
+}
+
+impl crate::Reloadable for CtrlCharge {
+    fn reload(&mut self) -> Result<(), RogError> {
+        if let Ok(mut config) = self.config.try_lock() {
+            config.read();
+            Self::set(config.bat_charge_limit, &mut config)?;
+        }
+        Ok(())
+    }
+}
+
+impl CtrlCharge {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        CtrlCharge::get_battery_path()?;
+        Ok(CtrlCharge { config })
+    }
+
+    fn get_battery_path() -> Result<&'static str, RogError> {
+        if Path::new(BAT_CHARGE_PATH0).exists() {
+            Ok(BAT_CHARGE_PATH0)
+        } else if Path::new(BAT_CHARGE_PATH1).exists() {
+            Ok(BAT_CHARGE_PATH1)
+        } else if Path::new(BAT_CHARGE_PATH2).exists() {
+            Ok(BAT_CHARGE_PATH2)
+        } else {
+            Err(RogError::MissingFunction(
+                "Charge control not available, you may require a v5.8.10 series kernel or newer"
+                    .into(),
+            ))
+        }
+    }
+
+    pub(super) fn set(limit: u8, config: &mut Config) -> Result<(), RogError> {
+        if !(20..=100).contains(&limit) {
+            return Err(RogError::ChargeLimit(limit));
+        }
+
+        let path = Self::get_battery_path()?;
+
+        let mut file = OpenOptions::new()
+            .write(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+        file.write_all(limit.to_string().as_bytes())
+            .map_err(|err| RogError::Write(path.into(), err))?;
+        info!("Battery charge limit: {}", limit);
+
+        config.read();
+        config.bat_charge_limit = limit;
+        config.write();
+
+        Ok(())
+    }
+}
+
+#[async_trait]
+impl CtrlTask for CtrlCharge {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let connection = Connection::system()
+            .await
+            .expect("CtrlCharge could not create dbus connection");
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlCharge could not create ManagerProxy");
+
+        let config1 = self.config.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_sleep().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                // If waking up
+                                if !args.start {
+                                    info!("CtrlCharge reloading charge limit");
+                                    if let Ok(mut lock) = config1.try_lock() {
+                                        Self::set(lock.bat_charge_limit, &mut lock)
+                                            .map_err(|err| {
+                                                warn!("CtrlCharge: set_limit {}", err);
+                                                err
+                                            })
+                                            .ok();
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+
+        let manager = ManagerProxy::new(&connection)
+            .await
+            .expect("CtrlCharge could not create ManagerProxy");
+
+        let config = self.config.clone();
+        executor
+            .spawn(async move {
+                if let Ok(notif) = manager.receive_prepare_for_shutdown().await {
+                    notif
+                        .for_each(|event| {
+                            if let Ok(args) = event.args() {
+                                // If waking up - intention is to catch hibernation event
+                                if !args.start {
+                                    info!("CtrlCharge reloading charge limit");
+                                    loop {
+                                        if let Ok(mut lock) = config.clone().try_lock() {
+                                            Self::set(lock.bat_charge_limit, &mut lock)
+                                                .map_err(|err| {
+                                                    warn!("CtrlCharge: set_limit {}", err);
+                                                    err
+                                                })
+                                                .ok();
+                                            break;
+                                        }
+                                    }
+                                }
+                            }
+                        })
+                        .await;
+                }
+            })
+            .detach();
+        Ok(())
+    }
+}

daemon/src/ctrl_profiles/config.rs

@@ -0,0 +1,101 @@
+use log::{error, warn};
+use rog_profiles::{FanCurveProfiles, Profile};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+
+#[derive(Deserialize, Serialize, Debug)]
+pub struct ProfileConfig {
+    #[serde(skip)]
+    config_path: String,
+    /// For restore on boot
+    pub active_profile: Profile,
+    /// States to restore
+    pub fan_curves: Option<FanCurveProfiles>,
+}
+
+impl ProfileConfig {
+    fn new(config_path: String) -> Self {
+        Self {
+            config_path,
+            active_profile: Profile::Balanced,
+            fan_curves: None,
+        }
+    }
+
+    pub fn set_defaults_and_save(&mut self) {
+        self.active_profile = Profile::get_active_profile().unwrap_or(Profile::Balanced);
+        if let Ok(res) = FanCurveProfiles::is_supported() {
+            if res {
+                let curves = FanCurveProfiles::default();
+                self.fan_curves = Some(curves);
+            }
+        }
+        self.write();
+    }
+
+    pub fn load(config_path: String) -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&config_path)
+            .unwrap_or_else(|_| panic!("The directory /etc/asusd/ is missing")); // okay to cause panic here
+        let mut buf = String::new();
+        let mut config;
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                config = Self::new(config_path);
+                config.set_defaults_and_save();
+            } else if let Ok(data) = toml::from_str(&buf) {
+                config = data;
+                config.config_path = config_path;
+            } else {
+                warn!(
+                    "Could not deserialise {}.\nWill rename to {}-old and recreate config",
+                    config_path, config_path
+                );
+                let cfg_old = config_path.clone() + "-old";
+                std::fs::rename(config_path.clone(), cfg_old).unwrap_or_else(|err| {
+                    panic!(
+                        "Could not rename. Please remove {} then restart service: Error {}",
+                        config_path, err
+                    )
+                });
+                config = Self::new(config_path);
+                config.set_defaults_and_save();
+            }
+        } else {
+            config = Self::new(config_path);
+            config.set_defaults_and_save();
+        }
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&self.config_path)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", self.config_path, err));
+
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", self.config_path);
+            } else {
+                let mut data: ProfileConfig = toml::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", self.config_path));
+                // copy over serde skipped values
+                data.config_path = self.config_path.clone();
+                *self = data;
+            }
+        }
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(&self.config_path).expect("Couldn't overwrite config");
+        let data = toml::to_string(self).expect("Parse config to toml failed");
+        file.write_all(data.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+}

daemon/src/ctrl_profiles/controller.rs

@@ -0,0 +1,157 @@
+use std::sync::{Arc, Mutex};
+
+use crate::error::RogError;
+use crate::{CtrlTask, GetSupported};
+use async_trait::async_trait;
+use log::{info, warn};
+use rog_profiles::error::ProfileError;
+use rog_profiles::{FanCurveProfiles, Profile};
+use rog_supported::PlatformProfileFunctions;
+use smol::Executor;
+
+use super::config::ProfileConfig;
+
+pub struct CtrlPlatformProfile {
+    pub config: ProfileConfig,
+}
+
+impl GetSupported for CtrlPlatformProfile {
+    type A = PlatformProfileFunctions;
+
+    fn get_supported() -> Self::A {
+        if !Profile::is_platform_profile_supported() {
+            warn!(
+                r#"
+platform_profile kernel interface not found, your laptop does not support this, or the interface is missing.
+To enable profile support you require a kernel version 5.15.2 minimum.
+"#
+            );
+        }
+
+        let res = FanCurveProfiles::is_supported();
+        let mut fan_curve_supported = res.is_err();
+        if let Ok(r) = res {
+            fan_curve_supported = r;
+        };
+
+        if !fan_curve_supported {
+            info!(
+                r#"
+fan curves kernel interface not found, your laptop does not support this, or the interface is missing.
+To enable fan-curve support you require a kernel with the following patch applied:
+https://lkml.org/lkml/2021/10/23/250
+This patch has been accepted upstream for 5.17 kernel release.
+"#
+            );
+        }
+
+        PlatformProfileFunctions {
+            platform_profile: Profile::is_platform_profile_supported(),
+            fan_curves: fan_curve_supported,
+        }
+    }
+}
+
+impl crate::Reloadable for CtrlPlatformProfile {
+    /// Fetch the active profile and use that to set all related components up
+    fn reload(&mut self) -> Result<(), RogError> {
+        if let Some(curves) = &mut self.config.fan_curves {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                // There is a possibility that the curve was default zeroed, so this call initialises
+                // the data from system read and we need to save it after
+                curves.write_profile_curve_to_platform(self.config.active_profile, &mut device)?;
+                self.config.write();
+            }
+        }
+        Ok(())
+    }
+}
+
+impl CtrlPlatformProfile {
+    pub fn new(config: ProfileConfig) -> Result<Self, RogError> {
+        if Profile::is_platform_profile_supported() {
+            info!("Device has profile control available");
+
+            if FanCurveProfiles::get_device().is_ok() {
+                info!("Device has fan curves available");
+            }
+
+            return Ok(CtrlPlatformProfile { config });
+        }
+
+        Err(ProfileError::NotSupported.into())
+    }
+
+    pub fn save_config(&self) {
+        self.config.write();
+    }
+
+    /// Toggle to next profile in list. This will first read the config, switch, then write out
+    pub(super) fn set_next_profile(&mut self) -> Result<(), RogError> {
+        // Read first just incase the user has modified the config before calling this
+        match self.config.active_profile {
+            Profile::Balanced => {
+                Profile::set_profile(Profile::Performance)?;
+                self.config.active_profile = Profile::Performance;
+            }
+            Profile::Performance => {
+                Profile::set_profile(Profile::Quiet)?;
+                self.config.active_profile = Profile::Quiet;
+            }
+            Profile::Quiet => {
+                Profile::set_profile(Profile::Balanced)?;
+                self.config.active_profile = Profile::Balanced;
+            }
+        }
+        self.write_profile_curve_to_platform()?;
+        Ok(())
+    }
+
+    /// Set the curve for the active profile active
+    pub(super) fn write_profile_curve_to_platform(&mut self) -> Result<(), RogError> {
+        if let Some(curves) = &mut self.config.fan_curves {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                curves.write_profile_curve_to_platform(self.config.active_profile, &mut device)?;
+            }
+        }
+        Ok(())
+    }
+
+    pub(super) fn set_active_curve_to_defaults(&mut self) -> Result<(), RogError> {
+        if let Some(curves) = self.config.fan_curves.as_mut() {
+            if let Ok(mut device) = FanCurveProfiles::get_device() {
+                curves.set_active_curve_to_defaults(self.config.active_profile, &mut device)?;
+            }
+        }
+        Ok(())
+    }
+}
+
+pub struct CtrlProfileTask {
+    ctrl: Arc<Mutex<CtrlPlatformProfile>>,
+}
+
+impl CtrlProfileTask {
+    pub fn new(ctrl: Arc<Mutex<CtrlPlatformProfile>>) -> Self {
+        Self { ctrl }
+    }
+}
+
+#[async_trait]
+impl CtrlTask for CtrlProfileTask {
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError> {
+        let ctrl = self.ctrl.clone();
+        self.repeating_task(666, executor, move || {
+            if let Ok(ref mut lock) = ctrl.try_lock() {
+                let new_profile = Profile::get_active_profile().unwrap();
+                if new_profile != lock.config.active_profile {
+                    lock.config.active_profile = new_profile;
+                    lock.write_profile_curve_to_platform().unwrap();
+                    lock.save_config();
+                }
+            }
+        })
+        .await;
+        Ok(())
+    }
+}

daemon/src/ctrl_profiles/mod.rs

@@ -0,0 +1,3 @@
+pub mod config;
+pub mod controller;
+pub mod zbus;

daemon/src/ctrl_profiles/zbus.rs

@@ -0,0 +1,187 @@
+use async_trait::async_trait;
+use log::warn;
+use rog_profiles::fan_curve_set::CurveData;
+use rog_profiles::fan_curve_set::FanCurveSet;
+use rog_profiles::Profile;
+use zbus::Connection;
+use zbus::SignalContext;
+
+use std::sync::Arc;
+use std::sync::Mutex;
+use zbus::{dbus_interface, fdo::Error};
+
+use super::controller::CtrlPlatformProfile;
+
+static UNSUPPORTED_MSG: &str =
+    "Fan curves are not supported on this laptop or you require a patched kernel";
+
+pub struct ProfileZbus {
+    inner: Arc<Mutex<CtrlPlatformProfile>>,
+}
+
+impl ProfileZbus {
+    pub fn new(inner: Arc<Mutex<CtrlPlatformProfile>>) -> Self {
+        Self { inner }
+    }
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl ProfileZbus {
+    /// Fetch profile names
+    fn profiles(&mut self) -> zbus::fdo::Result<Vec<Profile>> {
+        if let Ok(profiles) = Profile::get_profile_names() {
+            return Ok(profiles);
+        }
+        Err(Error::Failed(
+            "Failed to get all profile details".to_string(),
+        ))
+    }
+
+    /// Toggle to next platform_profile. Names provided by `Profiles`.
+    /// If fan-curves are supported will also activate a fan curve for profile.
+    async fn next_profile(&mut self, #[zbus(signal_context)] ctxt: SignalContext<'_>) {
+        let mut profile = None;
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.set_next_profile()
+                .unwrap_or_else(|err| warn!("{}", err));
+            ctrl.save_config();
+            profile = Some(ctrl.config.active_profile);
+        }
+        if let Some(profile) = profile {
+            Self::notify_profile(&ctxt, profile).await.ok();
+        }
+    }
+
+    /// Fetch the active profile name
+    fn active_profile(&mut self) -> zbus::fdo::Result<Profile> {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.config.read();
+            return Ok(ctrl.config.active_profile);
+        }
+        Err(Error::Failed(
+            "Failed to get active profile name".to_string(),
+        ))
+    }
+
+    /// Set this platform_profile name as active
+    async fn set_active_profile(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        profile: Profile,
+    ) {
+        let mut tmp = None;
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            // Read first just incase the user has modified the config before calling this
+            ctrl.config.read();
+            Profile::set_profile(profile)
+                .map_err(|e| warn!("set_profile, {}", e))
+                .ok();
+            ctrl.config.active_profile = profile;
+            ctrl.write_profile_curve_to_platform()
+                .map_err(|e| warn!("write_profile_curve_to_platform, {}", e))
+                .ok();
+
+            ctrl.save_config();
+            tmp = Some(ctrl.config.active_profile);
+        }
+        if let Some(profile) = tmp {
+            Self::notify_profile(&ctxt, profile).await.ok();
+        }
+    }
+
+    /// Get a list of profiles that have fan-curves enabled.
+    fn enabled_fan_profiles(&mut self) -> zbus::fdo::Result<Vec<Profile>> {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.config.read();
+            if let Some(curves) = &ctrl.config.fan_curves {
+                return Ok(curves.get_enabled_curve_profiles().to_vec());
+            }
+            return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
+        }
+        Err(Error::Failed(
+            "Failed to get enabled fan curve names".to_string(),
+        ))
+    }
+
+    /// Set a profile fan curve enabled status. Will also activate a fan curve if in the
+    /// same profile mode
+    fn set_fan_curve_enabled(&mut self, profile: Profile, enabled: bool) -> zbus::fdo::Result<()> {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.config.read();
+            return if let Some(curves) = &mut ctrl.config.fan_curves {
+                curves.set_profile_curve_enabled(profile, enabled);
+
+                ctrl.write_profile_curve_to_platform()
+                    .map_err(|e| warn!("write_profile_curve_to_platform, {}", e))
+                    .ok();
+
+                ctrl.save_config();
+                Ok(())
+            } else {
+                Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+            };
+        }
+        Err(Error::Failed(
+            "Failed to get enabled fan curve names".to_string(),
+        ))
+    }
+
+    /// Get the fan-curve data for the currently active Profile
+    fn fan_curve_data(&mut self, profile: Profile) -> zbus::fdo::Result<FanCurveSet> {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.config.read();
+            if let Some(curves) = &ctrl.config.fan_curves {
+                let curve = curves.get_fan_curves_for(profile);
+                return Ok(curve.clone());
+            }
+            return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
+        }
+        Err(Error::Failed("Failed to get fan curve data".to_string()))
+    }
+
+    /// Set the fan curve for the specified profile.
+    /// Will also activate the fan curve if the user is in the same mode.
+    fn set_fan_curve(&self, profile: Profile, curve: CurveData) -> zbus::fdo::Result<()> {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.config.read();
+            if let Some(curves) = &mut ctrl.config.fan_curves {
+                curves
+                    .save_fan_curve(curve, profile)
+                    .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
+            } else {
+                return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
+            }
+            ctrl.write_profile_curve_to_platform()
+                .map_err(|e| warn!("Profile::set_profile, {}", e))
+                .ok();
+            ctrl.save_config();
+        }
+        Ok(())
+    }
+
+    /// Reset the stored (self) and device curve to the defaults of the platform.
+    ///
+    /// Each platform_profile has a different default and the defualt can be read
+    /// only for the currently active profile.
+    fn set_active_curve_to_defaults(&self) -> zbus::fdo::Result<()> {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            ctrl.config.read();
+            ctrl.set_active_curve_to_defaults()
+                .map_err(|e| warn!("Profile::set_active_curve_to_defaults, {}", e))
+                .ok();
+            ctrl.save_config();
+        }
+        Ok(())
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_profile(signal_ctxt: &SignalContext<'_>, profile: Profile) -> zbus::Result<()> {
+    }
+}
+
+#[async_trait]
+impl crate::ZbusAdd for ProfileZbus {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Profile", server).await;
+    }
+}

daemon/src/ctrl_rog_bios.rs

@@ -0,0 +1,308 @@
+use crate::{config::Config, error::RogError, GetSupported};
+use async_trait::async_trait;
+use log::{error, info, warn};
+use rog_supported::RogBiosSupportedFunctions;
+use std::fs::OpenOptions;
+use std::io::BufRead;
+use std::io::{Read, Write};
+use std::path::Path;
+use std::process::Command;
+use std::sync::Arc;
+use std::sync::Mutex;
+use zbus::Connection;
+use zbus::{dbus_interface, SignalContext};
+
+const INITRAMFS_PATH: &str = "/usr/sbin/update-initramfs";
+const DRACUT_PATH: &str = "/usr/bin/dracut";
+
+static ASUS_SWITCH_GRAPHIC_MODE: &str =
+    "/sys/firmware/efi/efivars/AsusSwitchGraphicMode-607005d5-3f75-4b2e-98f0-85ba66797a3e";
+static ASUS_POST_LOGO_SOUND: &str =
+    "/sys/firmware/efi/efivars/AsusPostLogoSound-607005d5-3f75-4b2e-98f0-85ba66797a3e";
+
+pub struct CtrlRogBios {
+    _config: Arc<Mutex<Config>>,
+}
+
+impl GetSupported for CtrlRogBios {
+    type A = RogBiosSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        RogBiosSupportedFunctions {
+            post_sound_toggle: Path::new(ASUS_POST_LOGO_SOUND).exists(),
+            dedicated_gfx_toggle: Path::new(ASUS_SWITCH_GRAPHIC_MODE).exists(),
+        }
+    }
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlRogBios {
+    async fn set_dedicated_graphic_mode(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        dedicated: bool,
+    ) {
+        self.set_gfx_mode(dedicated)
+            .map_err(|err| {
+                warn!("CtrlRogBios: set_asus_switch_graphic_mode {}", err);
+                err
+            })
+            .ok();
+        Self::notify_dedicated_graphic_mode(&ctxt, dedicated)
+            .await
+            .ok();
+    }
+
+    fn dedicated_graphic_mode(&self) -> i8 {
+        Self::get_gfx_mode()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_gfx_mode {}", err);
+                err
+            })
+            .unwrap_or(-1)
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_dedicated_graphic_mode(
+        signal_ctxt: &SignalContext<'_>,
+        dedicated: bool,
+    ) -> zbus::Result<()> {
+    }
+
+    async fn set_post_boot_sound(
+        &mut self,
+        #[zbus(signal_context)] ctxt: SignalContext<'_>,
+        on: bool,
+    ) {
+        Self::set_boot_sound(on)
+            .map_err(|err| {
+                warn!("CtrlRogBios: set_post_boot_sound {}", err);
+                err
+            })
+            .ok();
+        Self::notify_post_boot_sound(&ctxt, on).await.ok();
+    }
+
+    fn post_boot_sound(&self) -> i8 {
+        Self::get_boot_sound()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_boot_sound {}", err);
+                err
+            })
+            .unwrap_or(-1)
+    }
+
+    #[dbus_interface(signal)]
+    async fn notify_post_boot_sound(ctxt: &SignalContext<'_>, on: bool) -> zbus::Result<()> {}
+}
+
+#[async_trait]
+impl crate::ZbusAdd for CtrlRogBios {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/RogBios", server).await;
+    }
+}
+
+impl crate::Reloadable for CtrlRogBios {
+    fn reload(&mut self) -> Result<(), RogError> {
+        Ok(())
+    }
+}
+
+impl CtrlRogBios {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        if Path::new(ASUS_SWITCH_GRAPHIC_MODE).exists() {
+            CtrlRogBios::set_path_mutable(ASUS_SWITCH_GRAPHIC_MODE)?;
+        } else {
+            info!("G-Sync Switchable Graphics not detected");
+            info!("If your laptop is not a G-Sync enabled laptop then you can ignore this. Standard graphics switching will still work.");
+        }
+
+        if Path::new(ASUS_POST_LOGO_SOUND).exists() {
+            CtrlRogBios::set_path_mutable(ASUS_POST_LOGO_SOUND)?;
+        } else {
+            info!("Switch for POST boot sound not detected");
+        }
+
+        Ok(CtrlRogBios { _config: config })
+    }
+
+    fn set_path_mutable(path: &str) -> Result<(), RogError> {
+        let output = Command::new("/usr/bin/chattr")
+            .arg("-i")
+            .arg(path)
+            .output()
+            .map_err(|err| RogError::Path(path.into(), err))?;
+        info!("Set {} writeable: status: {}", path, output.status);
+        Ok(())
+    }
+
+    pub fn has_dedicated_gfx_toggle() -> bool {
+        Path::new(ASUS_SWITCH_GRAPHIC_MODE).exists()
+    }
+
+    pub fn get_gfx_mode() -> Result<i8, RogError> {
+        let path = ASUS_SWITCH_GRAPHIC_MODE;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        Ok(data[idx] as i8)
+    }
+
+    pub(super) fn set_gfx_mode(&self, dedicated: bool) -> Result<(), RogError> {
+        let path = ASUS_SWITCH_GRAPHIC_MODE;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)?;
+
+        let idx = data.len() - 1;
+        if dedicated {
+            data[idx] = 1;
+            info!("Set system-level graphics mode: Dedicated Nvidia");
+        } else {
+            data[idx] = 0;
+            info!("Set system-level graphics mode: Optimus");
+        }
+        file.write_all(&data)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        self.update_initramfs(dedicated)?;
+        Ok(())
+    }
+
+    pub fn get_boot_sound() -> Result<i8, RogError> {
+        let path = ASUS_POST_LOGO_SOUND;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        Ok(data[idx] as i8)
+    }
+
+    pub(super) fn set_boot_sound(on: bool) -> Result<(), RogError> {
+        let path = ASUS_POST_LOGO_SOUND;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        if on {
+            data[idx] = 1;
+            info!("Set boot POST sound on");
+        } else {
+            data[idx] = 0;
+            info!("Set boot POST sound off");
+        }
+        file.write_all(&data)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        Ok(())
+    }
+
+    // required for g-sync mode
+    fn update_initramfs(&self, dedicated: bool) -> Result<(), RogError> {
+        let mut initfs_cmd = None;
+
+        if Path::new(INITRAMFS_PATH).exists() {
+            let mut cmd = Command::new("update-initramfs");
+            cmd.arg("-u");
+            initfs_cmd = Some(cmd);
+            info!("Using initramfs update command 'update-initramfs'");
+        } else if Path::new(DRACUT_PATH).exists() {
+            let mut cmd = Command::new("dracut");
+            cmd.arg("-f");
+            cmd.arg("-q");
+            initfs_cmd = Some(cmd);
+            info!("Using initramfs update command 'dracut'");
+        }
+
+        if let Some(mut cmd) = initfs_cmd {
+            info!("Updating initramfs");
+
+            // If switching to Nvidia dedicated we need these modules included
+            if Path::new(DRACUT_PATH).exists() && dedicated {
+                cmd.arg("--add-drivers");
+                cmd.arg("nvidia nvidia-drm nvidia-modeset nvidia-uvm");
+                info!("System uses dracut, forcing nvidia modules to be included in init");
+            } else if Path::new(INITRAMFS_PATH).exists() {
+                let modules = vec![
+                    "nvidia\n",
+                    "nvidia-drm\n",
+                    "nvidia-modeset\n",
+                    "nvidia-uvm\n",
+                ];
+
+                let module_include = Path::new("/etc/initramfs-tools/modules");
+
+                if dedicated {
+                    let mut file = std::fs::OpenOptions::new()
+                        .append(true)
+                        .open(module_include)
+                        .map_err(|err| {
+                            RogError::Write(module_include.to_string_lossy().to_string(), err)
+                        })?;
+                    // add nvidia modules to module_include
+                    file.write_all(modules.concat().as_bytes())?;
+                } else {
+                    let file = std::fs::OpenOptions::new()
+                        .read(true)
+                        .open(module_include)
+                        .map_err(|err| {
+                            RogError::Write(module_include.to_string_lossy().to_string(), err)
+                        })?;
+
+                    let mut buf = Vec::new();
+                    // remove modules
+                    for line in std::io::BufReader::new(file).lines().flatten() {
+                        if !modules.contains(&line.as_str()) {
+                            buf.append(&mut line.as_bytes().to_vec());
+                        }
+                    }
+
+                    let file = std::fs::OpenOptions::new()
+                        .write(true)
+                        .open(module_include)
+                        .map_err(|err| {
+                            RogError::Write(module_include.to_string_lossy().to_string(), err)
+                        })?;
+                    std::io::BufWriter::new(file).write_all(&buf)?;
+                }
+            }
+
+            let status = cmd
+                .status()
+                .map_err(|err| RogError::Write(format!("{:?}", cmd), err))?;
+            if !status.success() {
+                error!("Ram disk update failed");
+                return Err(RogError::Initramfs("Ram disk update failed".into()));
+            } else {
+                info!("Successfully updated initramfs");
+            }
+        }
+        Ok(())
+    }
+}

daemon/src/ctrl_supported.rs

@@ -0,0 +1,52 @@
+use async_trait::async_trait;
+use serde_derive::{Deserialize, Serialize};
+use zbus::dbus_interface;
+use zbus::Connection;
+use zvariant::Type;
+
+use crate::{
+    ctrl_anime::CtrlAnime, ctrl_aura::controller::CtrlKbdLed, ctrl_charge::CtrlCharge,
+    ctrl_profiles::controller::CtrlPlatformProfile, ctrl_rog_bios::CtrlRogBios, GetSupported,
+};
+
+use rog_supported::{
+    AnimeSupportedFunctions, ChargeSupportedFunctions, LedSupportedFunctions,
+    PlatformProfileFunctions, RogBiosSupportedFunctions,
+};
+
+#[derive(Serialize, Deserialize, Type)]
+pub struct SupportedFunctions {
+    pub anime_ctrl: AnimeSupportedFunctions,
+    pub charge_ctrl: ChargeSupportedFunctions,
+    pub platform_profile: PlatformProfileFunctions,
+    pub keyboard_led: LedSupportedFunctions,
+    pub rog_bios_ctrl: RogBiosSupportedFunctions,
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl SupportedFunctions {
+    fn supported_functions(&self) -> &SupportedFunctions {
+        self
+    }
+}
+
+#[async_trait]
+impl crate::ZbusAdd for SupportedFunctions {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, "/org/asuslinux/Supported", server).await;
+    }
+}
+
+impl GetSupported for SupportedFunctions {
+    type A = SupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        SupportedFunctions {
+            anime_ctrl: CtrlAnime::get_supported(),
+            keyboard_led: CtrlKbdLed::get_supported(),
+            charge_ctrl: CtrlCharge::get_supported(),
+            platform_profile: CtrlPlatformProfile::get_supported(),
+            rog_bios_ctrl: CtrlRogBios::get_supported(),
+        }
+    }
+}

daemon/src/daemon.rs

@@ -0,0 +1,183 @@
+use std::env;
+use std::error::Error;
+use std::io::Write;
+use std::sync::{Arc, Mutex};
+
+use ::zbus::Connection;
+use daemon::ctrl_profiles::controller::CtrlProfileTask;
+use log::LevelFilter;
+use log::{error, info, warn};
+use smol::Executor;
+
+use daemon::ctrl_anime::config::AnimeConfig;
+use daemon::ctrl_anime::zbus::CtrlAnimeZbus;
+use daemon::ctrl_anime::*;
+use daemon::ctrl_aura::config::AuraConfig;
+use daemon::ctrl_aura::controller::{
+    CtrlKbdLed, CtrlKbdLedReloader, CtrlKbdLedTask, CtrlKbdLedZbus,
+};
+use daemon::ctrl_charge::CtrlCharge;
+use daemon::ctrl_profiles::config::ProfileConfig;
+use daemon::ctrl_rog_bios::CtrlRogBios;
+use daemon::{
+    config::Config, ctrl_supported::SupportedFunctions, laptops::print_board_info, GetSupported,
+};
+use daemon::{
+    ctrl_profiles::{controller::CtrlPlatformProfile, zbus::ProfileZbus},
+    laptops::LaptopLedData,
+};
+use daemon::{CtrlTask, Reloadable, ZbusAdd};
+use rog_dbus::DBUS_NAME;
+use rog_profiles::Profile;
+
+static PROFILE_CONFIG_PATH: &str = "/etc/asusd/profile.conf";
+
+pub fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let mut logger = env_logger::Builder::new();
+    logger
+        .target(env_logger::Target::Stdout)
+        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
+        .filter(None, LevelFilter::Info)
+        .init();
+
+    let is_service = match env::var_os("IS_SERVICE") {
+        Some(val) => val == "1",
+        None => false,
+    };
+
+    if !is_service {
+        println!("asusd schould be only run from the right systemd service");
+        println!(
+            "do not run in your terminal, if you need an logs please use journalctl -b -u asusd"
+        );
+        println!("asusd will now exit");
+        return Ok(());
+    }
+
+    info!("       daemon v{}", daemon::VERSION);
+    info!("    rog-anime v{}", rog_anime::VERSION);
+    info!("     rog-aura v{}", rog_aura::VERSION);
+    info!("     rog-dbus v{}", rog_dbus::VERSION);
+    info!(" rog-profiles v{}", rog_profiles::VERSION);
+    info!("rog-supported v{}", rog_supported::VERSION);
+
+    let mut executor = Executor::new();
+
+    smol::block_on(start_daemon(&mut executor))?;
+    Ok(())
+}
+
+/// The actual main loop for the daemon
+async fn start_daemon(executor: &mut Executor<'_>) -> Result<(), Box<dyn Error>> {
+    let supported = SupportedFunctions::get_supported();
+    print_board_info();
+    println!("{}", serde_json::to_string_pretty(&supported)?);
+
+    // Start zbus server
+    let mut connection = Connection::system().await?;
+
+    let config = Config::load();
+    let config = Arc::new(Mutex::new(config));
+
+    supported.add_to_server(&mut connection).await;
+
+    match CtrlRogBios::new(config.clone()) {
+        Ok(mut ctrl) => {
+            // Do a reload of any settings
+            ctrl.reload()
+                .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
+            // Then register to dbus server
+            ctrl.add_to_server(&mut connection).await;
+        }
+        Err(err) => {
+            error!("rog_bios_control: {}", err);
+        }
+    }
+
+    match CtrlCharge::new(config.clone()) {
+        Ok(mut ctrl) => {
+            // Do a reload of any settings
+            ctrl.reload()
+                .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
+            // Then register to dbus server
+            ctrl.add_to_server(&mut connection).await;
+
+            let task = CtrlCharge::new(config)?;
+            task.create_tasks(executor).await.ok();
+        }
+        Err(err) => {
+            error!("charge_control: {}", err);
+        }
+    }
+
+    if Profile::is_platform_profile_supported() {
+        let profile_config = ProfileConfig::load(PROFILE_CONFIG_PATH.into());
+        match CtrlPlatformProfile::new(profile_config) {
+            Ok(mut ctrl) => {
+                ctrl.reload()
+                    .unwrap_or_else(|err| warn!("Profile control: {}", err));
+
+                let tmp = Arc::new(Mutex::new(ctrl));
+                let task = CtrlProfileTask::new(tmp.clone());
+                task.create_tasks(executor).await.ok();
+
+                let task = ProfileZbus::new(tmp.clone());
+                task.add_to_server(&mut connection).await;
+            }
+            Err(err) => {
+                error!("Profile control: {}", err);
+            }
+        }
+    } else {
+        warn!("platform_profile support not found. This requires kernel 5.15.x or the patch applied: https://lkml.org/lkml/2021/8/18/1022");
+    }
+
+    match CtrlAnime::new(AnimeConfig::load()) {
+        Ok(ctrl) => {
+            let inner = Arc::new(Mutex::new(ctrl));
+
+            let mut reload = CtrlAnimeReloader(inner.clone());
+            reload
+                .reload()
+                .unwrap_or_else(|err| warn!("AniMe: {}", err));
+
+            let zbus = CtrlAnimeZbus(inner.clone());
+            zbus.add_to_server(&mut connection).await;
+
+            let task = CtrlAnimeTask::new(inner).await;
+            task.create_tasks(executor).await.ok();
+        }
+        Err(err) => {
+            error!("AniMe control: {}", err);
+        }
+    }
+
+    let laptop = LaptopLedData::get_data();
+    let aura_config = AuraConfig::load(&laptop);
+    match CtrlKbdLed::new(laptop, aura_config) {
+        Ok(ctrl) => {
+            let inner = Arc::new(Mutex::new(ctrl));
+
+            let mut reload = CtrlKbdLedReloader(inner.clone());
+            reload
+                .reload()
+                .unwrap_or_else(|err| warn!("Keyboard LED control: {}", err));
+
+            CtrlKbdLedZbus::new(inner.clone())
+                .add_to_server(&mut connection)
+                .await;
+
+            let task = CtrlKbdLedTask::new(inner);
+            task.create_tasks(executor).await.ok();
+        }
+        Err(err) => {
+            error!("Keyboard control: {}", err);
+        }
+    }
+
+    // Request dbus name after finishing initalizing all functions
+    connection.request_name(DBUS_NAME).await?;
+    loop {
+        smol::block_on(executor.tick());
+    }
+}

daemon/src/error.rs

@@ -1,15 +1,11 @@
-use intel_pstate::PStateError;
-use rog_fan_curve::CurveError;
+use rog_profiles::error::ProfileError;
 use std::convert::From;
 use std::fmt;
 
-use crate::ctrl_gfx::error::GfxError;
-
 #[derive(Debug)]
 pub enum RogError {
-    ParseFanLevel,
     ParseVendor,
-    ParseLED,
+    ParseLed,
     MissingProfile(String),
     Udev(String, std::io::Error),
     Path(String, std::io::Error),
@@ -17,22 +13,24 @@ pub enum RogError {
     Write(String, std::io::Error),
     NotSupported,
     NotFound(String),
-    IntelPstate(PStateError),
-    FanCurve(CurveError),
     DoTask(String),
     MissingFunction(String),
     MissingLedBrightNode(String, std::io::Error),
     ReloadFail(String),
-    GfxSwitching(GfxError),
+    Profiles(ProfileError),
+    Initramfs(String),
+    Modprobe(String),
+    Io(std::io::Error),
+    Zbus(zbus::Error),
+    ChargeLimit(u8),
 }
 
 impl fmt::Display for RogError {
     // This trait requires `fmt` with this exact signature.
     fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
         match self {
-            RogError::ParseFanLevel => write!(f, "Parse profile error"),
             RogError::ParseVendor => write!(f, "Parse gfx vendor error"),
-            RogError::ParseLED => write!(f, "Parse LED error"),
+            RogError::ParseLed => write!(f, "Parse LED error"),
             RogError::MissingProfile(profile) => write!(f, "Profile does not exist {}", profile),
             RogError::Udev(deets, error) => write!(f, "udev {}: {}", deets, error),
             RogError::Path(path, error) => write!(f, "Path {}: {}", path, error),
@@ -40,27 +38,43 @@ impl fmt::Display for RogError {
             RogError::Write(path, error) => write!(f, "Write {}: {}", path, error),
             RogError::NotSupported => write!(f, "Not supported"),
             RogError::NotFound(deets) => write!(f, "Not found: {}", deets),
-            RogError::IntelPstate(err) => write!(f, "Intel pstate error: {}", err),
-            RogError::FanCurve(err) => write!(f, "Custom fan-curve error: {}", err),
             RogError::DoTask(deets) => write!(f, "Task error: {}", deets),
             RogError::MissingFunction(deets) => write!(f, "Missing functionality: {}", deets),
             RogError::MissingLedBrightNode(path, error) => write!(f, "Led node at {} is missing, please check you have the required patch or dkms module installed: {}", path, error),
             RogError::ReloadFail(deets) => write!(f, "Task error: {}", deets),
-            RogError::GfxSwitching(deets) => write!(f, "Graphics switching error: {}", deets),
+            RogError::Profiles(deets) => write!(f, "Profile error: {}", deets),
+            RogError::Initramfs(detail) => write!(f, "Initiramfs error: {}", detail),
+            RogError::Modprobe(detail) => write!(f, "Modprobe error: {}", detail),
+            RogError::Io(detail) => write!(f, "std::io error: {}", detail),
+            RogError::Zbus(detail) => write!(f, "Zbus error: {}", detail),
+            RogError::ChargeLimit(value) => write!(f, "Invalid charging limit, not in range 20-100%: {}", value),
         }
     }
 }
 
 impl std::error::Error for RogError {}
 
-impl From<PStateError> for RogError {
-    fn from(err: PStateError) -> Self {
-        RogError::IntelPstate(err)
+impl From<ProfileError> for RogError {
+    fn from(err: ProfileError) -> Self {
+        RogError::Profiles(err)
     }
 }
 
-impl From<CurveError> for RogError {
-    fn from(err: CurveError) -> Self {
-        RogError::FanCurve(err)
+impl From<zbus::Error> for RogError {
+    fn from(err: zbus::Error) -> Self {
+        RogError::Zbus(err)
+    }
+}
+
+impl From<std::io::Error> for RogError {
+    fn from(err: std::io::Error) -> Self {
+        RogError::Io(err)
+    }
+}
+
+impl From<RogError> for zbus::fdo::Error {
+    #[inline]
+    fn from(err: RogError) -> Self {
+        zbus::fdo::Error::Failed(format!("{}", err))
     }
 }

daemon/src/laptops.rs

@@ -0,0 +1,167 @@
+use log::{info, warn};
+use rog_aura::{AuraModeNum, AuraZone};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::OpenOptions;
+use std::io::Read;
+
+pub const ASUS_LED_MODE_CONF: &str = "/etc/asusd/asusd-ledmodes.toml";
+pub const ASUS_LED_MODE_USER_CONF: &str = "/etc/asusd/asusd-user-ledmodes.toml";
+pub const ASUS_KEYBOARD_DEVICES: [&str; 4] = ["1866", "1869", "1854", "19b6"];
+
+pub fn print_board_info() {
+    let dmi = sysfs_class::DmiId::default();
+    let board_name = dmi.board_name().expect("Could not get board_name");
+    let prod_family = dmi.product_family().expect("Could not get product_family");
+
+    info!("Product family: {}", prod_family.trim());
+    info!("Board name: {}", board_name.trim());
+}
+
+pub fn print_modes(supported_modes: &[u8]) {
+    if !supported_modes.is_empty() {
+        info!("Supported Keyboard LED modes are:");
+        for mode in supported_modes {
+            let mode = <&str>::from(&<AuraModeNum>::from(*mode));
+            info!("- {}", mode);
+        }
+        info!(
+            "If these modes are incorrect you can edit {}",
+            ASUS_LED_MODE_CONF
+        );
+    } else {
+        info!("No RGB control available");
+    }
+}
+
+#[derive(Debug, Default, Deserialize, Serialize)]
+struct LedSupportFile {
+    led_data: Vec<LaptopLedData>,
+}
+
+#[derive(Debug, Clone, Default, Deserialize, Serialize)]
+#[serde(default)]
+pub struct LaptopLedData {
+    pub prod_family: String,
+    pub board_names: Vec<String>,
+    pub standard: Vec<AuraModeNum>,
+    pub multizone: Vec<AuraZone>,
+    pub per_key: bool,
+}
+
+impl LaptopLedData {
+    pub fn get_data() -> Self {
+        let dmi = sysfs_class::DmiId::default();
+        let board_name = dmi.board_name().expect("Could not get board_name");
+        let prod_family = dmi.product_family().expect("Could not get product_family");
+
+        if let Some(modes) = LedSupportFile::load_from_config() {
+            if let Some(data) = modes.matcher(&prod_family, &board_name) {
+                return data;
+            }
+        }
+        info!("Using generic LED control for keyboard brightness only");
+        LaptopLedData {
+            prod_family,
+            board_names: vec![board_name],
+            standard: vec![],
+            multizone: vec![],
+            per_key: false,
+        }
+    }
+}
+
+impl LedSupportFile {
+    /// Consumes the LEDModes
+    fn matcher(self, prod_family: &str, board_name: &str) -> Option<LaptopLedData> {
+        for config in self.led_data {
+            if prod_family.contains(&config.prod_family) {
+                for board in &config.board_names {
+                    if board_name.contains(board) {
+                        info!("Matched to {} {}", config.prod_family, board);
+                        return Some(config);
+                    }
+                }
+            }
+        }
+        None
+    }
+
+    fn load_from_config() -> Option<Self> {
+        let mut loaded = false;
+        let mut data = LedSupportFile::default();
+        // Load user configs first so they are first to be checked
+        if let Ok(mut file) = OpenOptions::new().read(true).open(&ASUS_LED_MODE_USER_CONF) {
+            let mut buf = String::new();
+            if let Ok(l) = file.read_to_string(&mut buf) {
+                if l == 0 {
+                    warn!("{} is empty", ASUS_LED_MODE_USER_CONF);
+                } else {
+                    if let Ok(mut tmp) = toml::from_str::<LedSupportFile>(&buf) {
+                        data.led_data.append(&mut tmp.led_data);
+                    }
+                    info!(
+                        "Loaded user-defined LED support data from {}",
+                        ASUS_LED_MODE_USER_CONF
+                    );
+                }
+            }
+        }
+        // Load and append the default LED support data
+        if let Ok(mut file) = OpenOptions::new().read(true).open(&ASUS_LED_MODE_CONF) {
+            let mut buf = String::new();
+            if let Ok(l) = file.read_to_string(&mut buf) {
+                if l == 0 {
+                    warn!("{} is empty", ASUS_LED_MODE_CONF);
+                } else {
+                    let mut tmp: LedSupportFile = toml::from_str(&buf)
+                        .unwrap_or_else(|_| panic!("Could not deserialise {}", ASUS_LED_MODE_CONF));
+                    data.led_data.append(&mut tmp.led_data);
+                    loaded = true;
+                    info!(
+                        "Loaded default LED support data from {}",
+                        ASUS_LED_MODE_CONF
+                    );
+                }
+            }
+        }
+
+        if loaded {
+            return Some(data);
+        }
+
+        warn!("Does {} exist?", ASUS_LED_MODE_USER_CONF);
+        None
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use std::{fs::OpenOptions, io::Read, path::PathBuf};
+
+    use super::LaptopLedData;
+    use rog_aura::{AuraModeNum, AuraZone};
+
+    #[test]
+    fn check_data_parse() {
+        let led = LaptopLedData {
+            prod_family: "Test".to_owned(),
+            board_names: vec!["Test".to_owned()],
+            standard: vec![AuraModeNum::Static],
+            multizone: vec![AuraZone::Key1, AuraZone::Logo, AuraZone::BarLeft],
+            per_key: false,
+        };
+
+        let toml = toml::to_string_pretty(&led).unwrap();
+        println!("{toml}");
+
+        let mut data = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
+        data.push("../data/asusd-ledmodes.toml");
+
+        let mut file = OpenOptions::new().read(true).open(&data).unwrap();
+        let mut buf = String::new();
+        file.read_to_string(&mut buf).unwrap();
+
+        let x = toml::to_string_pretty(&buf).unwrap();
+        println!("{x}");
+    }
+}

daemon/src/lib.rs

@@ -0,0 +1,102 @@
+#![deny(unused_must_use)]
+/// Configuration loading, saving
+pub mod config;
+/// Control of AniMe matrix display
+pub mod ctrl_anime;
+/// Keyboard LED brightness control, RGB, and LED display modes
+pub mod ctrl_aura;
+/// Control of battery charge level
+pub mod ctrl_charge;
+/// Control CPU min/max freq and turbo, fan mode, fan curves
+///
+/// Intel machines can control:
+/// - CPU min/max frequency
+/// - CPU turbo enable/disable
+/// - Fan mode (normal, boost, silent)
+///
+/// AMD machines can control:
+/// - CPU turbo enable/disable
+/// - Fan mode (normal, boost, silent)
+/// - Fan min/max RPM curve
+pub mod ctrl_profiles;
+/// Control ASUS bios function such as boot sound, Optimus/Dedicated gfx mode
+pub mod ctrl_rog_bios;
+/// Laptop matching to determine capabilities
+pub mod laptops;
+
+/// Fetch all supported functions for the laptop
+pub mod ctrl_supported;
+
+pub mod error;
+
+use std::time::Duration;
+
+use crate::error::RogError;
+use async_trait::async_trait;
+use config::Config;
+use log::warn;
+use smol::{stream::StreamExt, Executor, Timer};
+use zbus::Connection;
+use zvariant::ObjectPath;
+
+pub static VERSION: &str = env!("CARGO_PKG_VERSION");
+
+pub trait Reloadable {
+    fn reload(&mut self) -> Result<(), RogError>;
+}
+
+#[async_trait]
+pub trait ZbusAdd {
+    async fn add_to_server(self, server: &mut Connection);
+
+    async fn add_to_server_helper(
+        iface: impl zbus::Interface,
+        path: &str,
+        server: &mut Connection,
+    ) {
+        server
+            .object_server()
+            .at(&ObjectPath::from_str_unchecked(path), iface)
+            .await
+            .map_err(|err| {
+                warn!("{}: add_to_server {}", path, err);
+                err
+            })
+            .ok();
+    }
+}
+
+/// Set up a task to run on the async executor
+#[async_trait]
+pub trait CtrlTask {
+    /// Implement to set up various tasks that may be required, using the `Executor`.
+    /// No blocking loops are allowed, or they must be run on a separate thread.
+    async fn create_tasks(&self, executor: &mut Executor) -> Result<(), RogError>;
+
+    /// Create a timed repeating task
+    async fn repeating_task(
+        &self,
+        millis: u64,
+        executor: &mut Executor,
+        mut task: impl FnMut() + Send + 'static,
+    ) {
+        let timer = Timer::interval(Duration::from_millis(millis));
+        executor
+            .spawn(async move {
+                timer.for_each(|_| task()).await;
+            })
+            .detach();
+    }
+}
+
+pub trait CtrlTaskComplex {
+    type A;
+
+    fn do_task(&mut self, config: &mut Config, event: Self::A);
+}
+
+pub trait GetSupported {
+    type A;
+
+    fn get_supported() -> Self::A;
+}

data/90-asusd-nvidia-pm.rules

@@ -1,7 +0,0 @@
-# Enable runtime PM for NVIDIA VGA/3D controller devices on driver bind
-ACTION=="bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030000", TEST=="power/control", ATTR{power/control}="auto"
-ACTION=="bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030200", TEST=="power/control", ATTR{power/control}="auto"
-
-# Disable runtime PM for NVIDIA VGA/3D controller devices on driver unbind
-ACTION=="unbind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030000", TEST=="power/control", ATTR{power/control}="on"
-ACTION=="unbind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030200", TEST=="power/control", ATTR{power/control}="on"

data/90-nvidia-screen-G05.conf

@@ -1,4 +0,0 @@
-Section "ServerLayout"
-  Identifier "layout"
-  Option "AllowNVIDIAGPUScreens"
-EndSection