Release 7.1.6

Typos
Update over-climate.md
2025-01-25 10:57:47 +00:00 · 2025-01-25 10:56:42 +00:00 · 2025-01-25 11:41:11 +01:00 · 2025-01-25 11:40:10 +01:00 · 2025-01-25 11:09:34 +01:00 · 2025-01-25 09:22:13 +01:00
32 changed files with 795 additions and 240 deletions
--- a/.github/ISSUE_TEMPLATE/config.yml
+++ b/.github/ISSUE_TEMPLATE/config.yml
@@ -0,0 +1 @@
+blank_issues_enabled: false
--- a/README-fr.md
+++ b/README-fr.md
@@ -35,6 +35,12 @@ Un grand merci à tous mes fournisseurs de bières pour leurs dons et leurs enco

  _AC_ : Air conditionné. Un équipement est AC si il fait du froid. Les températures sont alors inversées : Eco est plus chaud que Confort qui est plus chaud que Boost. Les algorithmes tiennent compte de cette information.

+  _EMA_ : Exponential Moving Average. Utilisé pour lisser les mesures de températures de capteur. Elle correspond à une moyenne glissante de la température de la pièce. Elle est utilisée pour calculer la pente de la courbe de température (slope) qui serait trop instable sur la courbe brute.
+
+  _slope_ : la pente de la courbe de température. Elle est mesurée en °(C ou K)/h. Elle est positive si la température augmente et négative si elle diminue. Cette pente est calculée sur l'_EMA_
+
+  _PAC_ : Pompe à chaleur
+
 # Documentation

 La documentation est maintenant découpée en plusieurs pages pour faciliter la lecture et la recherche d'informations :
--- a/README.md
+++ b/README.md
@@ -34,6 +34,12 @@ A big thank you to all my beer sponsors for their donations and encouragements.

  _AC_: Air Conditioning. An AC device cools instead of heats. Temperatures are reversed: Eco is warmer than Comfort, which is warmer than Boost. The algorithms take this information into account.

+  _EMA_: Exponential Moving Average. Used to smooth sensor temperature measurements. It represents a moving average of the room's temperature and is used to calculate the slope of the temperature curve, which would be too unstable on the raw data.
+
+  _slope_: The slope of the temperature curve, measured in ° (C or K)/h. It is positive when the temperature increases and negative when it decreases. This slope is calculated based on the _EMA_.
+
+  _PAC_ : Heat pump
+
 # Documentation

 The documentation is now divided into several pages for easier reading and searching:
--- a/custom_components/versatile_thermostat/base_thermostat.py
+++ b/custom_components/versatile_thermostat/base_thermostat.py
@@ -1050,7 +1050,7 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):
            self._hvac_mode in [HVACMode.COOL, HVACMode.HEAT, HVACMode.HEAT_COOL]
            and self.preset_mode != PRESET_NONE
        ):
-            if self.preset_mode != PRESET_FROST_PROTECTION:
+            if self.preset_mode != PRESET_FROST_PROTECTION or self._hvac_mode in [HVACMode.HEAT, HVACMode.HEAT_COOL]:
                await self.async_set_preset_mode_internal(self.preset_mode, True)
            else:
                await self.async_set_preset_mode_internal(PRESET_ECO, True, False)
@@ -1067,9 +1067,7 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):
        save_state()

    @overrides
-    async def async_set_preset_mode(
-        self, preset_mode: str, overwrite_saved_preset=True
-    ):
+    async def async_set_preset_mode(self, preset_mode: str, overwrite_saved_preset=True):
        """Set new preset mode."""

        # We accept a new preset when:
@@ -1097,14 +1095,10 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):

            return

-        await self.async_set_preset_mode_internal(
-            preset_mode, force=False, overwrite_saved_preset=overwrite_saved_preset
-        )
+        await self.async_set_preset_mode_internal(preset_mode, force=False, overwrite_saved_preset=overwrite_saved_preset)
        await self.async_control_heating(force=True)

-    async def async_set_preset_mode_internal(
-        self, preset_mode: str, force=False, overwrite_saved_preset=True
-    ):
+    async def async_set_preset_mode_internal(self, preset_mode: str, force=False, overwrite_saved_preset=True):
        """Set new preset mode."""
        _LOGGER.info("%s - Set preset_mode: %s force=%s", self, preset_mode, force)
        if (
@@ -1250,12 +1244,12 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):

    async def async_set_humidity(self, humidity: int):
        """Set new target humidity."""
-        _LOGGER.info("%s - Set fan mode: %s", self, humidity)
+        _LOGGER.info("%s - Set humidity: %s", self, humidity)
        return

    async def async_set_swing_mode(self, swing_mode: str):
        """Set new target swing operation."""
-        _LOGGER.info("%s - Set fan mode: %s", self, swing_mode)
+        _LOGGER.info("%s - Set swing mode: %s", self, swing_mode)
        return

    async def async_set_temperature(self, **kwargs):
@@ -1534,8 +1528,8 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):
        is_window_detected = self._window_manager.is_window_detected
        if new_central_mode == CENTRAL_MODE_AUTO:
            if not is_window_detected and not first_init:
-                await self.restore_hvac_mode()
-                await self.restore_preset_mode()
+                await self.restore_preset_mode(force=False)
+                await self.restore_hvac_mode(need_control_heating=True)
            elif is_window_detected and self.hvac_mode == HVACMode.OFF:
                # do not restore but mark the reason of off with window detection
                self.set_hvac_off_reason(HVAC_OFF_REASON_WINDOW_DETECTION)
@@ -1573,9 +1567,7 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):
                and HVACMode.HEAT in self.hvac_modes
            ):
                await self.async_set_hvac_mode(HVACMode.HEAT)
-                await self.async_set_preset_mode(
-                    PRESET_FROST_PROTECTION, overwrite_saved_preset=False
-                )
+                await self.async_set_preset_mode(PRESET_FROST_PROTECTION, overwrite_saved_preset=False)
            else:
                self.set_hvac_off_reason(HVAC_OFF_REASON_MANUAL)
                await self.async_set_hvac_mode(HVACMode.OFF)
@@ -1800,9 +1792,7 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):
        # If the changed preset is active, change the current temperature
        # Issue #119 - reload new preset temperature also in ac mode
        if preset.startswith(self._attr_preset_mode):
-            await self.async_set_preset_mode_internal(
-                preset.rstrip(PRESET_AC_SUFFIX), force=True
-            )
+            await self.async_set_preset_mode_internal(preset.rstrip(PRESET_AC_SUFFIX), force=True)
            await self.async_control_heating(force=True)

    async def SERVICE_SET_SAFETY(
--- a/custom_components/versatile_thermostat/central_feature_power_manager.py
+++ b/custom_components/versatile_thermostat/central_feature_power_manager.py
@@ -47,6 +47,7 @@ class CentralFeaturePowerManager(BaseFeatureManager):
        self._current_max_power: float = None
        self._power_temp: float = None
        self._cancel_calculate_shedding_call = None
+        self._started_vtherm_total_power: float = None
        # Not used now
        self._last_shedding_date = None

@@ -71,6 +72,7 @@ class CentralFeaturePowerManager(BaseFeatureManager):
            and self._power_temp
        ):
            self._is_configured = True
+            self._started_vtherm_total_power = 0
        else:
            _LOGGER.info("Power management is not fully configured and will be deactivated")

@@ -102,6 +104,8 @@ class CentralFeaturePowerManager(BaseFeatureManager):
        """Handle power changes."""
        _LOGGER.debug("Receive new Power event")
        _LOGGER.debug(event)
+
+        self._started_vtherm_total_power = 0
        await self.refresh_state()

    @callback
@@ -275,6 +279,12 @@ class CentralFeaturePowerManager(BaseFeatureManager):
        vtherms.sort(key=cmp_to_key(cmp_temps))
        return vtherms

+    def add_started_vtherm_total_power(self, started_power: float):
+        """Add the power into the _started_vtherm_total_power which holds all VTherm started after
+        the last power measurement"""
+        self._started_vtherm_total_power += started_power
+        _LOGGER.debug("%s - started_vtherm_total_power is now %s", self, self._started_vtherm_total_power)
+
    @property
    def is_configured(self) -> bool:
        """True if the FeatureManager is fully configured"""
@@ -305,5 +315,10 @@ class CentralFeaturePowerManager(BaseFeatureManager):
        """Return the max power sensor entity id"""
        return self._max_power_sensor_entity_id

+    @property
+    def started_vtherm_total_power(self) -> float | None:
+        """Return the started_vtherm_total_power"""
+        return self._started_vtherm_total_power
+
    def __str__(self):
        return "CentralPowerManager"
--- a/custom_components/versatile_thermostat/config_flow.py
+++ b/custom_components/versatile_thermostat/config_flow.py
@@ -318,9 +318,8 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
            ):
                return False

-            if infos.get(CONF_UNDERLYING_LIST, None) is not None and not infos.get(
-                CONF_UNDERLYING_LIST, None
-            ):
+            # checks that at least one underlying is set but not it central configuration
+            if len(infos.get(CONF_UNDERLYING_LIST, [])) < 1:
                return False

            if (
@@ -901,10 +900,42 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
        return await self.generic_step("advanced", schema, user_input, next_step)

    async def async_step_finalize(self, _):
-        """Should be implemented by Leaf classes"""
-        raise HomeAssistantError(
-            "async_finalize not implemented on VersatileThermostat sub-class"
-        )
+        """Finalize the creation. Should be overriden by underlyings"""
+        if not self._infos[CONF_USE_WINDOW_FEATURE]:
+            self._infos[CONF_USE_WINDOW_CENTRAL_CONFIG] = False
+            if CONF_WINDOW_SENSOR in self._infos:
+                del self._infos[CONF_WINDOW_SENSOR]
+            if CONF_WINDOW_AUTO_CLOSE_THRESHOLD in self._infos:
+                del self._infos[CONF_WINDOW_AUTO_CLOSE_THRESHOLD]
+            if CONF_WINDOW_AUTO_OPEN_THRESHOLD in self._infos:
+                del self._infos[CONF_WINDOW_AUTO_OPEN_THRESHOLD]
+            if CONF_WINDOW_AUTO_MAX_DURATION in self._infos:
+                del self._infos[CONF_WINDOW_AUTO_MAX_DURATION]
+        if not self._infos[CONF_USE_MOTION_FEATURE]:
+            self._infos[CONF_USE_MOTION_CENTRAL_CONFIG] = False
+            if CONF_MOTION_SENSOR in self._infos:
+                del self._infos[CONF_MOTION_SENSOR]
+        if not self._infos[CONF_USE_POWER_FEATURE]:
+            self._infos[CONF_USE_POWER_CENTRAL_CONFIG] = False
+            if CONF_POWER_SENSOR in self._infos:
+                del self._infos[CONF_POWER_SENSOR]
+            if CONF_MAX_POWER_SENSOR in self._infos:
+                del self._infos[CONF_MAX_POWER_SENSOR]
+        if not self._infos[CONF_USE_PRESENCE_FEATURE]:
+            self._infos[CONF_USE_PRESENCE_CENTRAL_CONFIG] = False
+            if CONF_PRESENCE_SENSOR in self._infos:
+                del self._infos[CONF_PRESENCE_SENSOR]
+        if not self._infos[CONF_USE_CENTRAL_BOILER_FEATURE]:
+            if CONF_CENTRAL_BOILER_ACTIVATION_SRV in self._infos:
+                del self._infos[CONF_CENTRAL_BOILER_ACTIVATION_SRV]
+            if CONF_CENTRAL_BOILER_DEACTIVATION_SRV in self._infos:
+                del self._infos[CONF_CENTRAL_BOILER_DEACTIVATION_SRV]
+        if not self._infos[CONF_USE_AUTO_START_STOP_FEATURE]:
+            self._infos[CONF_AUTO_START_STOP_LEVEL] = AUTO_START_STOP_LEVEL_NONE
+
+        # Removes temporary value
+        if COMES_FROM in self._infos:
+            del self._infos[COMES_FROM]


 class VersatileThermostatConfigFlow(  # pylint: disable=abstract-method
@@ -928,9 +959,8 @@ class VersatileThermostatConfigFlow(  # pylint: disable=abstract-method
    async def async_step_finalize(self, _):
        """Finalization of the ConfigEntry creation"""
        _LOGGER.debug("ConfigFlow.async_finalize")
-        # Removes temporary value
-        if COMES_FROM in self._infos:
-            del self._infos[COMES_FROM]
+        await super().async_step_finalize(_)
+
        return self.async_create_entry(title=self._infos[CONF_NAME], data=self._infos)


@@ -968,37 +998,13 @@ class VersatileThermostatOptionsFlowHandler(

    async def async_step_finalize(self, _):
        """Finalization of the ConfigEntry creation"""
-        if not self._infos[CONF_USE_WINDOW_FEATURE]:
-            self._infos[CONF_USE_WINDOW_CENTRAL_CONFIG] = False
-            self._infos[CONF_WINDOW_SENSOR] = None
-            self._infos[CONF_WINDOW_AUTO_CLOSE_THRESHOLD] = None
-            self._infos[CONF_WINDOW_AUTO_OPEN_THRESHOLD] = None
-            self._infos[CONF_WINDOW_AUTO_MAX_DURATION] = None
-        if not self._infos[CONF_USE_MOTION_FEATURE]:
-            self._infos[CONF_USE_MOTION_CENTRAL_CONFIG] = False
-            self._infos[CONF_MOTION_SENSOR] = None
-        if not self._infos[CONF_USE_POWER_FEATURE]:
-            self._infos[CONF_USE_POWER_CENTRAL_CONFIG] = False
-            self._infos[CONF_POWER_SENSOR] = None
-            self._infos[CONF_MAX_POWER_SENSOR] = None
-        if not self._infos[CONF_USE_PRESENCE_FEATURE]:
-            self._infos[CONF_USE_PRESENCE_CENTRAL_CONFIG] = False
-            self._infos[CONF_PRESENCE_SENSOR] = None
-        if not self._infos[CONF_USE_CENTRAL_BOILER_FEATURE]:
-            self._infos[CONF_CENTRAL_BOILER_ACTIVATION_SRV] = None
-            self._infos[CONF_CENTRAL_BOILER_DEACTIVATION_SRV] = None
-        if not self._infos[CONF_USE_AUTO_START_STOP_FEATURE]:
-            self._infos[CONF_AUTO_START_STOP_LEVEL] = AUTO_START_STOP_LEVEL_NONE

        _LOGGER.info(
            "Recreating entry %s due to configuration change. New config is now: %s",
            self.config_entry.entry_id,
            self._infos,
        )
-
-        # Removes temporary value
-        if COMES_FROM in self._infos:
-            del self._infos[COMES_FROM]
+        await super().async_step_finalize(_)

        self.hass.config_entries.async_update_entry(self.config_entry, data=self._infos)
        return self.async_create_entry(title=None, data=None)
--- a/custom_components/versatile_thermostat/feature_auto_start_stop_manager.py
+++ b/custom_components/versatile_thermostat/feature_auto_start_stop_manager.py
@@ -70,6 +70,10 @@ class FeatureAutoStartStopManager(BaseFeatureManager):
            self._auto_start_stop_level, self.name
        )

+        # Fix an eventual incoherent state
+        if self._vtherm.is_on and self._vtherm.hvac_off_reason == HVAC_OFF_REASON_AUTO_START_STOP:
+            self._vtherm.hvac_off_reason = None
+
    @overrides
    async def start_listening(self):
        """Start listening the underlying entity"""
--- a/custom_components/versatile_thermostat/feature_power_manager.py
+++ b/custom_components/versatile_thermostat/feature_power_manager.py
@@ -104,7 +104,8 @@ class FeaturePowerManager(BaseFeatureManager):

    async def check_power_available(self) -> bool:
        """Check if the Vtherm can be started considering overpowering.
-        Returns True if no overpowering conditions are found
+        Returns True if no overpowering conditions are found.
+        If True the vtherm power is written into the temporay vtherm started
        """

        vtherm_api = VersatileThermostatAPI.get_vtherm_api()
@@ -116,6 +117,7 @@ class FeaturePowerManager(BaseFeatureManager):

        current_power = vtherm_api.central_power_manager.current_power
        current_max_power = vtherm_api.central_power_manager.current_max_power
+        started_vtherm_total_power = vtherm_api.central_power_manager.started_vtherm_total_power
        if (
            current_power is None
            or current_max_power is None
@@ -146,7 +148,7 @@ class FeaturePowerManager(BaseFeatureManager):
                    self._device_power * self._vtherm.proportional_algorithm.on_percent,
                )

-        ret = (current_power + power_consumption_max) < current_max_power
+        ret = (current_power + started_vtherm_total_power + power_consumption_max) < current_max_power
        if not ret:
            _LOGGER.info(
                "%s - there is not enough power available power=%.3f, max_power=%.3f heater power=%.3f",
@@ -155,6 +157,10 @@ class FeaturePowerManager(BaseFeatureManager):
                current_max_power,
                self._device_power,
            )
+        else:
+            # Adds the current_power_max to the started vtherm total power
+            vtherm_api.central_power_manager.add_started_vtherm_total_power(power_consumption_max)
+
        return ret

    async def set_overpowering(self, overpowering: bool, power_consumption_max=0):
--- a/custom_components/versatile_thermostat/manifest.json
+++ b/custom_components/versatile_thermostat/manifest.json
@@ -14,6 +14,6 @@
  "quality_scale": "silver",
  "requirements": [],
  "ssdp": [],
-  "version": "7.1.4",
+  "version": "7.1.6",
  "zeroconf": []
 }
--- a/custom_components/versatile_thermostat/thermostat_climate.py
+++ b/custom_components/versatile_thermostat/thermostat_climate.py
@@ -3,7 +3,7 @@
 import logging
 from datetime import timedelta, datetime

-from homeassistant.const import STATE_ON
+from homeassistant.const import STATE_ON, STATE_UNAVAILABLE, STATE_UNKNOWN
 from homeassistant.core import Event, HomeAssistant, State, callback
 from homeassistant.helpers.event import (
    async_track_state_change_event,
@@ -614,7 +614,7 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
            return

        # Find the underlying which have change
-        under = self.find_underlying_by_entity_id(new_state.entity_id)
+        under: UnderlyingClimate = self.find_underlying_by_entity_id(new_state.entity_id)

        if not under:
            _LOGGER.warning(
@@ -626,6 +626,16 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
        new_hvac_mode = new_state.state

        old_state = event.data.get("old_state")
+
+        # Issue #829 - refresh underlying command if it comes back to life
+        if old_state is not None and new_state.state not in (STATE_UNAVAILABLE, STATE_UNKNOWN) and old_state.state in (STATE_UNAVAILABLE, STATE_UNKNOWN):
+            _LOGGER.warning("%s - underlying %s come back to life. New state=%s, old_state=%s. Will refresh its status", self, under.entity_id, new_state.state, old_state.state)
+            # Force hvac_mode and target temperature
+            await under.set_hvac_mode(self.hvac_mode)
+            await self._send_regulated_temperature(force=True)
+
+            return
+
        old_hvac_action = (
            old_state.attributes.get("hvac_action")
            if old_state and old_state.attributes
@@ -1094,7 +1104,7 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
    @overrides
    async def async_set_humidity(self, humidity: int):
        """Set new target humidity."""
-        _LOGGER.info("%s - Set fan mode: %s", self, humidity)
+        _LOGGER.info("%s - Set humidity: %s", self, humidity)
        if humidity is None:
            return
        for under in self._underlyings:
@@ -1105,7 +1115,7 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
    @overrides
    async def async_set_swing_mode(self, swing_mode):
        """Set new target swing operation."""
-        _LOGGER.info("%s - Set fan mode: %s", self, swing_mode)
+        _LOGGER.info("%s - Set swing mode: %s", self, swing_mode)
        if swing_mode is None:
            return
        for under in self._underlyings:
--- a/custom_components/versatile_thermostat/translations/fr.json
+++ b/custom_components/versatile_thermostat/translations/fr.json
@@ -155,7 +155,7 @@
        },
        "data_description": {
          "motion_sensor_entity_id": "Id d'entité du détecteur de mouvement",
-          "motion_delay": "Délai avant activation lorsqu'un mouvement est détecté (secondss)",
+          "motion_delay": "Délai avant activation lorsqu'un mouvement est détecté (secondes)",
          "motion_off_delai": "Délai avant désactivation lorsqu'aucun mouvement n'est détecté (secondes)",
          "motion_preset": "Preset à utiliser si mouvement détecté",
          "no_motion_preset": "Preset à utiliser si pas de mouvement détecté",
@@ -200,7 +200,7 @@
          "use_advanced_central_config": "Utiliser la configuration centrale avancée"
        },
        "data_description": {
-          "minimal_activation_delay": "Délai en seondes en-dessous duquel l'équipement ne sera pas activé",
+          "minimal_activation_delay": "Délai en secondes en-dessous duquel l'équipement ne sera pas activé",
          "safety_delay_min": "Délai maximal autorisé en minutes entre 2 mesures de températures. Au-dessus de ce délai, le thermostat se mettra en position de sécurité",
          "safety_min_on_percent": "Seuil minimal de pourcentage de chauffage en-dessous duquel le préréglage sécurité ne sera jamais activé",
          "safety_default_on_percent": "Valeur par défaut pour le pourcentage de chauffage en mode sécurité. Mettre 0 pour éteindre le radiateur en mode sécurité",
--- a/custom_components/versatile_thermostat/underlyings.py
+++ b/custom_components/versatile_thermostat/underlyings.py
@@ -611,7 +611,7 @@ class UnderlyingClimate(UnderlyingEntity):

    async def set_humidity(self, humidity: int):
        """Set new target humidity."""
-        _LOGGER.info("%s - Set fan mode: %s", self, humidity)
+        _LOGGER.info("%s - Set humidity: %s", self, humidity)
        if not self.is_initialized:
            return
        data = {
@@ -627,7 +627,7 @@ class UnderlyingClimate(UnderlyingEntity):

    async def set_swing_mode(self, swing_mode):
        """Set new target swing operation."""
-        _LOGGER.info("%s - Set fan mode: %s", self, swing_mode)
+        _LOGGER.info("%s - Set swing mode: %s", self, swing_mode)
        if not self.is_initialized:
            return
        data = {
--- a/documentation/en/images/card-trv-jeffodilo.png
+++ b/documentation/en/images/card-trv-jeffodilo.png
--- a/documentation/en/over-climate.md
+++ b/documentation/en/over-climate.md
@@ -60,6 +60,8 @@ Of course, your underlying equipment must have ventilation, and it must be contr

 ### Compensating for the Internal Temperature of the Underlying Equipment

+Warning: This option must not be used with direct valve control regulation if a calibration entity has been provided.
+
 Sometimes, the internal thermometer of the underlying equipment (TRV, air conditioner, etc.) is inaccurate to the point that self-regulation is insufficient. This happens when the internal thermometer is placed too close to the heat source. The internal temperature rises much faster than the room temperature, leading to regulation failures.
 Example:
 1. Room temperature is 18°, setpoint is 20°.
@@ -99,4 +101,4 @@ When this entity is 'On', all temperature or state changes made directly on the
 Be careful, if you use this feature, your equipment is now controlled in two ways: _VTherm_ and directly by you. The commands might be contradictory, which could lead to confusion about the equipment's state. _VTherm_ is equipped with a delay mechanism that prevents loops: the user gives a setpoint, which is captured by _VTherm_ and changes the setpoint, ... This delay may cause the change made directly on the equipment to be ignored if these changes are too close together in time.

 Some equipment (like Daikin, for example) changes state by itself. If the checkbox is checked, it may turn off the _VTherm_ when that's not what you intended.
-That's why it's better not to use it. It generates a lot of confusion and many support requests.
+That's why it's better not to use it. It generates a lot of confusion and many support requests.
--- a/documentation/en/presentation.md
+++ b/documentation/en/presentation.md
@@ -40,4 +40,5 @@ Some TRV type thermostats are known to be incompatible with Versatile Thermostat
 5. TRVs like Aqara SRTS-A01 and MOES TV01-ZB, which lack the `hvac_action` state feedback to determine whether they are heating or not. Therefore, state feedback is inaccurate, but the rest seems functional.
 6. Airwell air conditioners with the "Midea AC LAN" integration. If two VTherm commands are too close together, the air conditioner stops itself.
 7. Climates based on the Overkiz integration do not work. It seems impossible to turn off or even change the temperature on these systems.
+8. Heating systems based on Netatmo perform poorly. Netatmo schedules conflict with _VTherm_ programming. Netatmo devices constantly revert to `Auto` mode, which is poorly managed with _VTherm_. In this mode, _VTherm_ cannot determine whether the system is heating or cooling, making it impossible to select the correct algorithm. Some users have managed to make it work using a virtual switch between _VTherm_ and the underlying system, but stability is not guaranteed. An example is provided in the [troubleshooting](troubleshooting.md) section.

--- a/documentation/en/self-regulation.md
+++ b/documentation/en/self-regulation.md
@@ -31,8 +31,8 @@ This allows you to configure the valve control entities:
 You need to provide:
 1. As many valve opening control entities as there are underlying devices, and in the same order. These parameters are mandatory.
 2. As many temperature calibration entities as there are underlying devices, and in the same order. These parameters are optional; they must either all be provided or none.
-3. As many valve closure control entities as there are underlying devices, and in the same order. These parameters are optional; they must either all be provided or none.
-4. A list of minimum opening values for the valve when it needs to be opened. This field is a list of integers. If the valve needs to be opened, it will be opened at a minimum of this opening value. This allows enough water to pass through when it needs to be opened.
+3. As many valve closure control entities as there are underlying devices, and in the same order. These parameters are optional; they must either all be provided or none. For Sonoff TRVZB, you should not configure this entity. See the note below.
+4. A list of minimum opening values for the valve when it needs to be opened. This field is a list of integers. If the valve needs to be opened, it will be opened at a minimum of this opening value, else it will be set to 0 (to ensure the valve is closed). This allows enough water to pass through when it needs to be opened.

 The opening rate calculation algorithm is based on the _TPI_ algorithm described [here](algorithms.md). This is the same algorithm used for _VTherms_ `over_switch` and `over_valve`.

@@ -152,4 +152,4 @@ To apply the changes, you must either **restart Home Assistant completely** or j

 ## Summary of the Auto-Regulation Algorithm

-A summary of the auto-regulation algorithm is described [here](algorithms.md#the-auto-regulation-algorithm-without-valve-control)
+A summary of the auto-regulation algorithm is described [here](algorithms.md#the-auto-regulation-algorithm-without-valve-control)
--- a/documentation/en/troubleshooting.md
+++ b/documentation/en/troubleshooting.md
@@ -4,6 +4,7 @@
 - [Troubleshooting](#troubleshooting)
  - [Using a Heatzy](#using-a-heatzy)
  - [Using a radiator with a pilot wire (Nodon SIN-4-FP-21)](#using-a-radiator-with-a-pilot-wire-nodon-sin-4-fp-21)
+  - [Using a Netatmo System](#using-a-netatmo-system)
  - [Only the first radiator heats](#only-the-first-radiator-heats)
  - [The radiator heats even though the setpoint temperature is exceeded, or it does not heat when the room temperature is well below the setpoint](#the-radiator-heats-even-though-the-setpoint-temperature-is-exceeded-or-it-does-not-heat-when-the-room-temperature-is-well-below-the-setpoint)
    - [Type `over_switch` or `over_valve`](#type-over_switch-or-over_valve)
@@ -16,6 +17,7 @@
  - [Using a Group of People as a Presence Sensor](#using-a-group-of-people-as-a-presence-sensor)
  - [Enable Logs for the Versatile Thermostat](#enable-logs-for-the-versatile-thermostat)
  - [VTherm does not track setpoint changes made directly on the underlying device (`over_climate`)](#vtherm-does-not-track-setpoint-changes-made-directly-on-the-underlying-device-over_climate)
+  - [VTherm Automatically Switches to 'Cooling' or 'Heating' Mode](#vtherm-automatically-switches-to-cooling-or-heating-mode)


 ## Using a Heatzy
@@ -85,6 +87,17 @@ Example:

 Another more complex example is [here](https://github.com/jmcollin78/versatile_thermostat/discussions/431#discussioncomment-11393065)

+## Using a Netatmo System
+
+The system based on Netatmo TRVs does not work well with _VTherm_. You can find a discussion about the specific behavior of Netatmo systems (in French) here: [https://forum.hacf.fr/t/vannes-netatmo-et-vtherm/56063](https://forum.hacf.fr/t/vannes-netatmo-et-vtherm/56063).
+
+However, some users have successfully integrated _VTherm_ with Netatmo by incorporating a virtual switch between _VTherm_ and the Netatmo `climate` entity, as follows:
+
+```
+TODO
+```
+
+
 ## Only the first radiator heats

 In `over_switch` mode, if multiple radiators are configured for the same VTherm, the heating will be triggered sequentially to smooth out the consumption peaks as much as possible.
@@ -213,4 +226,10 @@ Be careful, in debug mode, Versatile Thermostat is very verbose and can quickly

 ## VTherm does not track setpoint changes made directly on the underlying device (`over_climate`)

-See the details of this feature [here](over-climate.md#track-underlying-temperature-changes).
+See the details of this feature [here](over-climate.md#track-underlying-temperature-changes).
+
+## VTherm Automatically Switches to 'Cooling' or 'Heating' Mode
+
+Some reversible heat pumps have modes that allow the heat pump to decide whether to heat or cool. These modes are labeled as 'Auto' or 'Heat_cool' depending on the brand. These two modes should not be used with _VTherm_ because _VTherm_'s algorithms require explicit knowledge of whether the system is in heating or cooling mode, which these modes do not provide.
+
+You should only use the following modes: `Heat`, `Cool`, `Off`, or optionally `Fan` (although `Fan` has no practical purpose with _VTherm_).
--- a/documentation/fr/additions.md
+++ b/documentation/fr/additions.md
@@ -5,6 +5,7 @@
  - [Composant Scheduler !](#composant-scheduler-)
  - [Courbes de régulattion avec Plotly](#courbes-de-régulattion-avec-plotly)
  - [Les notification avec l'AappDaemon NOTIFIER](#les-notification-avec-laappdaemon-notifier)
+  - [Une très belle carte (merci @Jeffodilo)](#une-très-belle-carte-merci-jeffodilo)


 ## Versatile Thermostat UI Card
@@ -213,4 +214,275 @@ action:
 mode: queued
 max: 30
 ```
+</details>
+
+## Une très belle carte (merci @Jeffodilo)
+
+@Jeffodilo a réalisé et partagé le code d'une très belle carte adaptée au TRV :
+
+![carte Jeffodilo](images/card-trv-jeffodilo.png)
+
+Cette carte n’utilise pas card_mod, elle utilise les cartes custom assez courante suivantes
+On garde une partie de l’interface UI, sauf pour l’horizontale de la 2ème ligne
+- custom:vertical-stack-in-card
+- custom:stack-in-card
+- custom:mini-graph-card
+- custom:mushroom-template-card
+- custom:button-card
+
+L'original est ici (En Français): [forum HACF](https://forum.hacf.fr/t/carte-mise-en-forme-vanne-avec-thermostant-versatile/56132)
+
+Evidemment, vous devez l'adapter à votre code.
+
+Le code:
+
+<details>
+
+```yaml
+type: vertical-stack
+cards:
+  - type: heading
+    icon: mdi:bed-double
+    heading: Parents
+    heading_style: title
+  - type: custom:vertical-stack-in-card
+    cards:
+      - type: custom:mini-graph-card
+        entities:
+          - entity: sensor.sonde_parents_temperature
+            name: Température
+            state_adaptive_color: true
+          - entity: climate.valve_parents
+            name: Temp
+            attribute: current_temperature
+            unit: °C
+            state_adaptive_color: true
+            show_graph: false
+            show_state: true
+        hour24: true
+        hours_to_show: 24
+        points_per_hour: 2
+        font_size: 50
+        show:
+          name: false
+          icon: false
+          legend: false
+          labels: true
+          extrema: false
+        color_thresholds:
+          - color: "#33ccff"
+            value: 19
+          - color: "#00ffff"
+            value: 19.5
+          - color: "#33ffcc"
+            value: 20
+          - color: "#00ff99"
+            value: 20.5
+          - color: "#ffff99"
+            value: 21
+          - color: "#ffff33"
+            value: 21.5
+          - color: "#ff9933"
+            value: 22
+          - color: "#cc6633"
+            value: 24
+          - color: "#ff6000"
+            value: 26
+      - type: custom:stack-in-card
+        mode: horizontal
+        cards:
+          - type: custom:mushroom-template-card
+            secondary: ""
+            layout: horizontal
+            tap_action:
+              action: more-info
+            entity: sensor.sonde_parents_temperature
+            fill_container: false
+            multiline_secondary: false
+            primary: >-
+              {% if is_state_attr('climate.versatile_parents','hvac_action',
+              'idle') %}
+               🗜️ {{ states('number.valve_parents_valve_opening_degree', with_unit=True,)}} |🔋{{ states('sensor.valve_parents_battery') }} % | Inactif
+              {% elif  is_state_attr('climate.versatile_parents','hvac_action',
+              'heating') %}
+               🗜️ {{ states('number.valve_parents_valve_opening_degree', with_unit=True,)}} |🔋{{ states('sensor.valve_parents_battery') }} % | Chauffe
+              {% else %} 🗜️ {{
+              states('number.valve_parents_valve_opening_degree',
+              with_unit=True,)}} | 🔋{{ states('sensor.valve_parents_battery')
+              }} % | Off {% endif %}
+            icon: ""
+          - type: horizontal-stack
+            cards:
+              - type: custom:button-card
+                name: Conf.
+                entity: climate.versatile_parents
+                show_state: false
+                show_icon: true
+                show_name: false
+                icon: mdi:fire
+                size: 80%
+                styles:
+                  icon:
+                    - color: |
+                        [[[
+                          if (states['climate.versatile_parents']) {
+                          if (states['climate.versatile_parents'].attributes.preset_mode == 'comfort')
+                            return 'darkorange';
+                          else
+                            return 'white'; }
+                        ]]]
+                  name:
+                    - color: white
+                    - font-size: 60%
+                  card:
+                    - height: 40px
+                    - width: 30px
+                tap_action:
+                  action: perform-action
+                  perform_action: climate.set_preset_mode
+                  target:
+                    entity_id:
+                      - climate.versatile_parents
+                  data:
+                    preset_mode: comfort
+              - type: custom:button-card
+                name: Eco
+                entity: climate.versatile_parents
+                show_state: false
+                show_icon: true
+                show_name: false
+                icon: mdi:leaf
+                size: 80%
+                styles:
+                  icon:
+                    - color: |
+                        [[[
+                          if (states['climate.versatile_parents']) {
+                          if (states['climate.versatile_parents'].attributes.preset_mode == 'eco')
+                            return 'lightgreen';
+                          else
+                            return 'white'; }
+                        ]]]
+                  name:
+                    - color: white
+                    - font-size: 60%
+                  card:
+                    - height: 40px
+                    - width: 30px
+                tap_action:
+                  action: perform-action
+                  perform_action: climate.set_preset_mode
+                  target:
+                    entity_id:
+                      - climate.versatile_parents
+                  data:
+                    preset_mode: eco
+              - type: custom:button-card
+                name: Manu
+                entity: climate.versatile_parents
+                show_state: false
+                show_icon: true
+                show_name: false
+                icon: mdi:hand-back-left
+                size: 80%
+                styles:
+                  icon:
+                    - color: |
+                        [[[
+                          if (states['climate.versatile_parents']) {
+                          if (states['climate.versatile_parents'].attributes.preset_mode == 'none')
+                            return 'indianred';
+                          else
+                            return 'white'; }
+                        ]]]
+                  name:
+                    - color: white
+                    - font-size: 60%
+                  card:
+                    - height: 40px
+                    - width: 30px
+                tap_action:
+                  action: perform-action
+                  perform_action: climate.set_preset_mode
+                  target:
+                    entity_id:
+                      - climate.versatile_parents
+                  data:
+                    preset_mode: none
+              - type: custom:button-card
+                name: Abs.
+                entity: climate.versatile_parents
+                show_state: false
+                show_icon: true
+                show_name: false
+                icon: mdi:snowflake
+                size: 80%
+                styles:
+                  icon:
+                    - color: |
+                        [[[
+                          if (states['climate.versatile_parents']) {
+                          if (states['climate.versatile_parents'].attributes.preset_mode == 'frost')
+                            return 'skyblue';
+                          else
+                            return 'white'; }
+                        ]]]
+                  name:
+                    - color: white
+                    - font-size: 60%
+                  card:
+                    - height: 40px
+                    - width: 30px
+                tap_action:
+                  action: perform-action
+                  perform_action: climate.set_preset_mode
+                  target:
+                    entity_id:
+                      - climate.versatile_parents
+                  data:
+                    preset_mode: frost
+              - type: custom:button-card
+                name: Boost
+                entity: climate.versatile_parents
+                show_state: false
+                show_icon: true
+                show_name: false
+                icon: mdi:rocket-launch
+                size: 80%
+                styles:
+                  icon:
+                    - color: |
+                        [[[
+                          if (states['climate.versatile_parents']) {
+                          if (states['climate.versatile_parents'].attributes.preset_mode == 'boost')
+                            return 'red';
+                          else
+                            return 'white'; }
+                        ]]]
+                  name:
+                    - color: white
+                    - font-size: 60%
+                  card:
+                    - height: 40px
+                    - width: 30px
+                tap_action:
+                  action: perform-action
+                  perform_action: climate.set_preset_mode
+                  target:
+                    entity_id:
+                      - climate.versatile_parents
+                  data:
+                    preset_mode: boost
+      - type: custom:mushroom-climate-card
+        entity: climate.versatile_parents
+        show_temperature_control: true
+        hvac_modes: []
+        tap_action:
+          action: more-info
+        primary_info: state
+        icon: mdi:radiator
+        secondary_info: last-updated
+        fill_container: false
+        layout: horizontal
+```
 </details>
--- a/documentation/fr/images/card-trv-jeffodilo.png
+++ b/documentation/fr/images/card-trv-jeffodilo.png
--- a/documentation/fr/over-climate.md
+++ b/documentation/fr/over-climate.md
@@ -63,6 +63,8 @@ Une fois l'écart de température redevenu faible, la ventilation se mettra dans

 ### Compenser la température interne du sous-jacent

+Attention : cette option ne doit pas être utilisée avec une régulation par contrôle direct de la vanne si une entité de calibrage a été fournie.
+
 Quelque fois, il arrive que le thermomètre interne du sous-jacent (TRV, climatisation, ...) soit tellement faux que l' auto-régulation ne suffise pas à réguler.
 Cela arrive lorsque le thermomètre interne est trop près de la source de chaleur. La température interne monte alors beaucoup plus vite que la température de la pièce, ce qui génère des défauts dans la régulation.
 Exemple :
@@ -103,4 +105,4 @@ Lorsque cette entité est 'On', tous les changements de température ou d'état
 Attention, si vous utilisez cette fonction, votre équipement est maintenant contrôlé par 2 moyens : _VTherm_ et par vous même directement. Les ordres peuvent être contradictoires et cela peut induire une incompréhension sur l'état de l'équipement. _VTherm_ est équipé d'un mécanisme de temporisation qui évite les boucles : l'utilisateur donne une consigne qui est captée par _VTherm_ qui change la consigne, ... Cette temporisation peut faire que le changement fait directement sur l'équipement est ignoré si ces changements sont trop rapprochés dans le temps.

 Certains équipements (Daikin par exemple), changent d'état tout seul. Si la case est cochée, cela peut éteindre le _VTherm_ alors que ce n'est pas ce que vous souhaitiez.
-C'est pour ça qu'il est préférable de ne pas l'utiliser. Cela génère beaucoup d'incompréhensions et de nombreuses demandes de support.
+C'est pour ça qu'il est préférable de ne pas l'utiliser. Cela génère beaucoup d'incompréhensions et de nombreuses demandes de support.
--- a/documentation/fr/presentation.md
+++ b/documentation/fr/presentation.md
@@ -33,11 +33,12 @@ Toutes ces fonctions sont configurables de façon centralisée ou individuelle e

 ## Incompatibilités
 Certains thermostat de type TRV sont réputés incompatibles avec le Versatile Thermostat. C'est le cas des vannes suivantes :
-1. les vannes POPP de Danfoss avec retour de température. Il est impossible d'éteindre cette vanne et elle s'auto-régule d'elle-même causant des conflits avec le VTherm,
+1. les vannes POPP de Danfoss avec retour de température. Il est impossible d'éteindre cette vanne et elle s'auto-régule d'elle-même causant des conflits avec le _VTherm_,
 2. Les thermostats « Homematic » (et éventuellement Homematic IP) sont connus pour rencontrer des problèmes avec le Versatile Thermostat en raison des limitations du protocole RF sous-jacent. Ce problème se produit particulièrement lorsque vous essayez de contrôler plusieurs thermostats Homematic à la fois dans une seule instance de VTherm. Afin de réduire la charge du cycle de service, vous pouvez par ex. regroupez les thermostats avec des procédures spécifiques à Homematic (par exemple en utilisant un thermostat mural) et laissez Versatile Thermostat contrôler uniquement le thermostat mural directement. Une autre option consiste à contrôler un seul thermostat et à propager les changements de mode CVC et de température par un automatisme,
 3. les thermostats de type Heatzy qui ne supportent pas les commandes de type set_temperature
 4. les thermostats de type Rointe ont tendance a se réveiller tout seul. Le reste fonctionne normalement.
 5. les TRV de type Aqara SRTS-A01 et MOES TV01-ZB qui n'ont pas le retour d'état `hvac_action` permettant de savoir si elle chauffe ou pas. Donc les retours d'état sont faussés, le reste à l'air fonctionnel.
 6. La clim Airwell avec l'intégration "Midea AC LAN". Si 2 commandes de VTherm sont trop rapprochées, la clim s'arrête d'elle même.
 7. Les climates basés sur l'intégration Overkiz ne fonctionnent pas. Il parait impossible d'éteindre ni même de changer la température sur ces systèmes.
+8. Les systèmes de chauffage basés sur Netatmo fonctionnent mal. Les plannings Netatmo viennent en concurrence de la programmation _VTherm_. Les sous-jacents Netatmo repasse en mode `Auto` tout le temps et ce mode est très mal géré avec _VTherm_ qui ne peut pas savoir si le sysème chauffe ou refroidit et donc quel algorithme choisir. Certains ont quand même réussi à le faire fonctionner avec un switch virtuel entre le _VTherm_ et le sous-jacent mais sans garantie de stabilité. Un exemple est donné dans la section [dépannage](troubleshooting.md)

--- a/documentation/fr/self-regulation.md
+++ b/documentation/fr/self-regulation.md
@@ -32,8 +32,8 @@ Elle permet de configurer les entités de contrôle de la vanne :
 Vous devez donner :
 1. autant d'entités de contrôle d'ouverture de la vanne qu'il y a de sous-jacents et dans le même odre. Ces paramètres sont obligatoires,
 2. autant d'entités de calibrage du décalage de température qu'il y a de sous-jacents et dans le même ordre. Ces paramètres sont facultatifs ; ils doivent être tous founis ou aucun,
-3. autant d'entités de de contrôile du taux de fermture qu'il y a de sous-jacents et dans le même ordre. Ces paramètres sont facultatifs ; ils doivent être tous founis ou aucun,
-4. une liste de valeurs minimales d'ouverture de la vanne lorsqu'elle doit être ouverte. Ce champ est une liste d'entier. Si la vanne doit être ouverte, elle le sera au minimum avec cette valeur d'ouverture. Cela permet de laisser passer suffisamment d'eau lorsqu'elle doit être ouverte.
+3. autant d'entités de de contrôile du taux de fermture qu'il y a de sous-jacents et dans le même ordre. Ces paramètres sont facultatifs ; ils doivent être tous founis ou aucun. Pour les Sonoff TRVZB, ils ne doivent pas être fournis,
+4. une liste de valeurs minimales d'ouverture de la vanne lorsqu'elle doit être ouverte. Ce champ est une liste d'entier. Si la vanne doit être ouverte, elle le sera au minimum avec cette valeur d'ouverture, sinon elle sera totalement close (0). Cela permet de laisser passer suffisamment d'eau lorsqu'elle doit être ouverte mais garde la fermeeture complète si il n'y a pas besoin de chauffer.

 L'algorithme de calcul du taux d'ouverture est basé sur le _TPI_ qui est décrit [ici](algorithms.md). C'est le même algorithme qui est utilisé pour les _VTherm_ `over_switch` et `over_valve`.

@@ -152,4 +152,4 @@ Pour que les modifications soient prises en compte, il faut soit **relancer tota

 ## Synthèse de l'algorithme d'auto-régulation

-Une synthèse de l'algorithme d'auto-régulation est décrite [ici](algorithms.md#lalgorithme-dauto-régulation-sans-contrôle-de-la-vanne)
+Une synthèse de l'algorithme d'auto-régulation est décrite [ici](algorithms.md#lalgorithme-dauto-régulation-sans-contrôle-de-la-vanne)
--- a/documentation/fr/troubleshooting.md
+++ b/documentation/fr/troubleshooting.md
@@ -4,6 +4,7 @@
 - [Dépannages](#dépannages)
  - [Utilisation d'un Heatzy](#utilisation-dun-heatzy)
  - [Utilisation d'un radiateur avec un fil pilote (Nodon SIN-4-FP-21)](#utilisation-dun-radiateur-avec-un-fil-pilote-nodon-sin-4-fp-21)
+  - [Utilisation d'un système Netatmo](#utilisation-dun-système-netatmo)
  - [Seul le premier radiateur chauffe](#seul-le-premier-radiateur-chauffe)
  - [Le radiateur chauffe alors que la température de consigne est dépassée ou ne chauffe pas alors que la température de la pièce est bien en-dessous de la consigne](#le-radiateur-chauffe-alors-que-la-température-de-consigne-est-dépassée-ou-ne-chauffe-pas-alors-que-la-température-de-la-pièce-est-bien-en-dessous-de-la-consigne)
    - [Type `over_switch` ou `over_valve`](#type-over_switch-ou-over_valve)
@@ -84,6 +85,15 @@ Exemple :
 ```
 Un exemple plus complet est [ici](https://github.com/jmcollin78/versatile_thermostat/discussions/431#discussioncomment-11393065)

+## Utilisation d'un système Netatmo
+Le système à base de TRV Netatmo fonctionne mal avec _VTherm_. Vous avez ici une discussion sur le fonctionnement particulier des systèmes Netatmo (en Français) : https://forum.hacf.fr/t/vannes-netatmo-et-vtherm/56063
+Cependant certains ont réussi une intégration _VTerm_ Netatmo en intégrant un switch virtuel entre _VTherm_ et le `climate` Netatmo suivant :
+```
+TODO add virtual switch code
+```
+
+
+
 ## Seul le premier radiateur chauffe

 En mode `over_switch` si plusieurs radiateurs sont configurés pour un même VTherm, l'alllumage va se faire de façon séquentiel pour lisser au plus possible les pics de consommation.
@@ -210,4 +220,9 @@ Attention, en mode debug Versatile Thermostat est très verbeux et peut vite ral

 ## VTherm ne suit pas les changements de consigne faits directement depuis le sous-jacents (`over_climate`)

-Voir le détail de cette fonction [ici](over-climate.md#suivre-les-changements-de-température-du-sous-jacent).
+Voir le détail de cette fonction [ici](over-climate.md#suivre-les-changements-de-température-du-sous-jacent).
+
+## VTherm passe tout seul en mode 'clim' ou en mode 'chauffage'
+
+Certaine _PAC_ réversibles ont des modes qui permettent de laisser le choix à la _PAC_ de chauffer ou de réfroidir. Ces modes sont 'Auto' or 'Heat_cool' selon les marques. Ces 2 modes ne doivent pas être utilisés avec _VTherm_ car les algorithmes de _VTherm_ ont besoin de savoir si ils sont en mode chauffe ou refroidissement ce que ne permettent pas ces modes.
+Vous devez donc utiliser uniquement les modes : `Heat`, `Cool`, `Off` ou `Fan` éventuellement (bien que fan n'a aucun sens avec _Vtherm)
--- a/tests/commons.py
+++ b/tests/commons.py
@@ -87,7 +87,6 @@ FULL_SWITCH_CONFIG = (
    | MOCK_TH_OVER_SWITCH_CENTRAL_MAIN_CONFIG
    | MOCK_TH_OVER_SWITCH_TYPE_CONFIG
    | MOCK_TH_OVER_SWITCH_TPI_CONFIG
-    #    | MOCK_PRESETS_CONFIG
    | MOCK_FULL_FEATURES
    | MOCK_WINDOW_CONFIG
    | MOCK_MOTION_CONFIG
@@ -111,12 +110,7 @@ FULL_SWITCH_AC_CONFIG = (
 )

 PARTIAL_CLIMATE_CONFIG = (
-    MOCK_TH_OVER_CLIMATE_USER_CONFIG
-    | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG
-    | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG
-    | MOCK_TH_OVER_CLIMATE_TYPE_CONFIG
-    #    | MOCK_PRESETS_CONFIG
-    | MOCK_ADVANCED_CONFIG
+    MOCK_TH_OVER_CLIMATE_USER_CONFIG | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_TYPE_CONFIG | MOCK_ADVANCED_CONFIG
 )

 PARTIAL_CLIMATE_CONFIG_USE_DEVICE_TEMP = (
@@ -124,7 +118,6 @@ PARTIAL_CLIMATE_CONFIG_USE_DEVICE_TEMP = (
    | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG
    | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG
    | MOCK_TH_OVER_CLIMATE_TYPE_USE_DEVICE_TEMP_CONFIG
-    #    | MOCK_PRESETS_CONFIG
    | MOCK_ADVANCED_CONFIG
 )

@@ -133,24 +126,17 @@ PARTIAL_CLIMATE_NOT_REGULATED_CONFIG = (
    | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG
    | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG
    | MOCK_TH_OVER_CLIMATE_TYPE_NOT_REGULATED_CONFIG
-    #    | MOCK_PRESETS_CONFIG
    | MOCK_ADVANCED_CONFIG
 )

 PARTIAL_CLIMATE_AC_CONFIG = (
-    MOCK_TH_OVER_CLIMATE_USER_CONFIG
-    | MOCK_TH_OVER_CLIMATE_TYPE_AC_CONFIG
-    | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG
-    | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG
-    #    | MOCK_PRESETS_CONFIG
-    | MOCK_ADVANCED_CONFIG
+    MOCK_TH_OVER_CLIMATE_USER_CONFIG | MOCK_TH_OVER_CLIMATE_TYPE_AC_CONFIG | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG | MOCK_ADVANCED_CONFIG
 )

 FULL_4SWITCH_CONFIG = (
    MOCK_TH_OVER_4SWITCH_USER_CONFIG
    | MOCK_TH_OVER_4SWITCH_TYPE_CONFIG
    | MOCK_TH_OVER_SWITCH_TPI_CONFIG
-    #    | MOCK_PRESETS_CONFIG
    | MOCK_WINDOW_CONFIG
    | MOCK_MOTION_CONFIG
    | MOCK_POWER_CONFIG
@@ -1037,6 +1023,16 @@ default_temperatures_ac_away = {
    "boost_ac_away": 23.1,
 }

+default_temperatures_ac = {
+    "frost": 7.0,
+    "eco": 17.0,
+    "comfort": 19.0,
+    "boost": 21.0,
+    "eco_ac": 27.0,
+    "comfort_ac": 25.0,
+    "boost_ac": 23.0,
+}
+
 default_temperatures_away = {
    "frost": 7.0,
    "eco": 17.0,
--- a/tests/test_binary_sensors.py
+++ b/tests/test_binary_sensors.py
@@ -1,7 +1,7 @@
 # pylint: disable=wildcard-import, unused-wildcard-import, unused-argument, line-too-long, protected-access

 """ Test the normal start of a Thermostat """
-from unittest.mock import patch
+from unittest.mock import patch, PropertyMock
 from datetime import timedelta, datetime

 from homeassistant.core import HomeAssistant
@@ -179,7 +179,7 @@ async def test_overpowering_binary_sensors(
    )
    # fmt:off
    with patch("homeassistant.core.StateMachine.get", side_effect=side_effects.get_side_effects()), \
-        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", return_value="True"):
+        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", new_callable=PropertyMock, return_value=True):
    # fmt: on
        await send_power_change_event(entity, 150, now)
        await send_max_power_change_event(entity, 100, now)
--- a/tests/test_central_power_manager.py
+++ b/tests/test_central_power_manager.py
@@ -1,5 +1,6 @@
 # pylint: disable=protected-access, unused-argument, line-too-long
 """ Test the Central Power management """
+import asyncio
 from unittest.mock import patch, AsyncMock, MagicMock, PropertyMock
 from datetime import datetime, timedelta
 import logging
@@ -10,6 +11,14 @@ from custom_components.versatile_thermostat.feature_power_manager import (
 from custom_components.versatile_thermostat.central_feature_power_manager import (
    CentralFeaturePowerManager,
 )
+
+from custom_components.versatile_thermostat.thermostat_switch import (
+    ThermostatOverSwitch,
+)
+from custom_components.versatile_thermostat.thermostat_climate import (
+    ThermostatOverClimate,
+)
+
 from .commons import *  # pylint: disable=wildcard-import, unused-wildcard-import

 logging.getLogger().setLevel(logging.DEBUG)
@@ -700,3 +709,150 @@ async def test_central_power_manager_max_power_event(

        assert central_power_manager.current_max_power == expected_power
        assert mock_calculate_shedding.call_count == nb_call
+
+
+async def test_central_power_manager_start_vtherm_power(hass: HomeAssistant, skip_hass_states_is_state, init_central_power_manager):
+    """Tests the central power start VTherm power. The objective is to starts VTherm until the power max is exceeded"""
+
+    temps = {
+        "eco": 17,
+        "comfort": 18,
+        "boost": 19,
+    }
+
+    entry = MockConfigEntry(
+        domain=DOMAIN,
+        title="TheOverSwitchMockName",
+        unique_id="uniqueId",
+        data={
+            CONF_NAME: "TheOverSwitchMockName",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            CONF_USE_WINDOW_FEATURE: False,
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: True,
+            CONF_USE_PRESENCE_FEATURE: False,
+            CONF_UNDERLYING_LIST: ["switch.mock_switch"],
+            CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
+            CONF_TPI_COEF_INT: 0.3,
+            CONF_TPI_COEF_EXT: 0.01,
+            CONF_MINIMAL_ACTIVATION_DELAY: 30,
+            CONF_SAFETY_DELAY_MIN: 5,
+            CONF_SAFETY_MIN_ON_PERCENT: 0.3,
+            CONF_DEVICE_POWER: 1000,
+            CONF_PRESET_POWER: 12,
+        },
+    )
+
+    entity: ThermostatOverSwitch = await create_thermostat(hass, entry, "climate.theoverswitchmockname", temps)
+    assert entity
+
+    now: datetime = NowClass.get_now(hass)
+    VersatileThermostatAPI.get_vtherm_api()._set_now(now)
+
+    central_power_manager = VersatileThermostatAPI.get_vtherm_api().central_power_manager
+    assert central_power_manager
+
+    side_effects = SideEffects(
+        {
+            "sensor.the_power_sensor": State("sensor.the_power_sensor", 1000),
+            "sensor.the_max_power_sensor": State("sensor.the_max_power_sensor", 2100),
+        },
+        State("unknown.entity_id", "unknown"),
+    )
+
+    # 1. Make the heater heats
+    # fmt: off
+    with patch("homeassistant.core.StateMachine.get", side_effect=side_effects.get_side_effects()), \
+         patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", new_callable=PropertyMock, return_value=False):
+    # fmt: on
+        # make the heater heats
+        await send_power_change_event(entity, 1000, now)
+        await send_max_power_change_event(entity, 2100, now)
+
+        await send_temperature_change_event(entity, 15, now)
+        await send_ext_temperature_change_event(entity, 1, now)
+
+        await entity.async_set_preset_mode(PRESET_BOOST)
+        assert entity.preset_mode is PRESET_BOOST
+        assert entity.power_manager.overpowering_state is STATE_UNKNOWN
+        assert entity.target_temperature == 19
+        await hass.async_block_till_done()
+
+        await entity.async_set_hvac_mode(HVACMode.HEAT)
+        assert entity.hvac_mode is HVACMode.HEAT
+
+        await hass.async_block_till_done()
+        await asyncio.sleep(0.1)
+
+        # the power of Vtherm should have been added
+        assert central_power_manager.started_vtherm_total_power == 1000
+
+    # 2. Check that another heater cannot heat
+    entry2 = MockConfigEntry(
+        domain=DOMAIN,
+        title="TheOverClimateMockName2",
+        unique_id="uniqueId2",
+        data={
+            CONF_NAME: "TheOverClimateMockName2",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_CLIMATE,
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            CONF_USE_WINDOW_FEATURE: False,
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: True,
+            CONF_USE_PRESENCE_FEATURE: False,
+            CONF_UNDERLYING_LIST: ["switch.mock_climate"],
+            CONF_MINIMAL_ACTIVATION_DELAY: 30,
+            CONF_SAFETY_DELAY_MIN: 5,
+            CONF_SAFETY_MIN_ON_PERCENT: 0.3,
+            CONF_DEVICE_POWER: 150,
+            CONF_PRESET_POWER: 12,
+        },
+    )
+
+    entity2: ThermostatOverClimate = await create_thermostat(hass, entry2, "climate.theoverclimatemockname2", temps)
+    assert entity2
+
+    fake_underlying_climate = MockClimate(
+        hass=hass,
+        unique_id="mockUniqueId",
+        name="MockClimateName",
+    )
+
+    # fmt: off
+    with patch("homeassistant.core.StateMachine.get", side_effect=side_effects.get_side_effects()), \
+         patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", new_callable=PropertyMock, return_value=False), \
+         patch("custom_components.versatile_thermostat.underlyings.UnderlyingClimate.find_underlying_climate",return_value=fake_underlying_climate):
+    # fmt: on
+        # make the heater heats
+        await entity2.async_set_preset_mode(PRESET_COMFORT)
+        assert entity2.preset_mode is PRESET_COMFORT
+        assert entity2.power_manager.overpowering_state is STATE_UNKNOWN
+        assert entity2.target_temperature == 18
+        await entity2.async_set_hvac_mode(HVACMode.HEAT)
+        assert entity2.hvac_mode is HVACMode.HEAT
+
+        await hass.async_block_till_done()
+        await asyncio.sleep(0.1)
+
+        # the power of Vtherm should have not been added (cause it has not started) and the entity2 should be shedding
+        assert central_power_manager.started_vtherm_total_power == 1000
+
+
+        assert entity2.power_manager.overpowering_state is STATE_ON
+
+    # 3. sends a new power sensor event
+    await send_max_power_change_event(entity, 2150, now)
+    # No change
+    assert central_power_manager.started_vtherm_total_power == 1000
+
+    await send_power_change_event(entity, 1010, now)
+    assert central_power_manager.started_vtherm_total_power == 0
--- a/tests/test_config_flow.py
+++ b/tests/test_config_flow.py
@@ -287,6 +287,7 @@ async def test_user_config_flow_over_switch(
            CONF_USE_POWER_FEATURE: True,
            CONF_USE_PRESENCE_FEATURE: True,
            CONF_USE_CENTRAL_BOILER_FEATURE: False,
+            CONF_AUTO_START_STOP_LEVEL: AUTO_START_STOP_LEVEL_NONE,
        }
    )
    assert result["result"]
@@ -492,9 +493,7 @@ async def test_user_config_flow_over_climate(
    )
    assert result["type"] == FlowResultType.CREATE_ENTRY
    assert result.get("errors") is None
-    assert result[
-        "data"
-    ] == MOCK_TH_OVER_CLIMATE_USER_CONFIG | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_TYPE_CONFIG | {
+    assert result["data"] == MOCK_TH_OVER_CLIMATE_USER_CONFIG | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_TYPE_CONFIG | {
        CONF_MINIMAL_ACTIVATION_DELAY: 10,
        CONF_SAFETY_DELAY_MIN: 5,
        CONF_SAFETY_MIN_ON_PERCENT: 0.4,
@@ -517,6 +516,7 @@ async def test_user_config_flow_over_climate(
        CONF_USED_BY_CENTRAL_BOILER: False,
        CONF_USE_CENTRAL_MODE: False,
        CONF_AUTO_REGULATION_MODE: CONF_AUTO_REGULATION_STRONG,
+        CONF_AUTO_START_STOP_LEVEL: AUTO_START_STOP_LEVEL_NONE,
    }
    assert result["result"]
    assert result["result"].domain == DOMAIN
@@ -1378,6 +1378,7 @@ async def test_user_config_flow_over_switch_bug_552_tpi(
            CONF_USE_POWER_FEATURE: False,
            CONF_USE_PRESENCE_FEATURE: False,
            CONF_USE_CENTRAL_BOILER_FEATURE: False,
+            CONF_AUTO_START_STOP_LEVEL: AUTO_START_STOP_LEVEL_NONE,
        }
    )
    assert result["result"]
@@ -1681,9 +1682,7 @@ async def test_user_config_flow_over_climate_valve(
    )
    assert result["type"] == FlowResultType.CREATE_ENTRY
    assert result.get("errors") is None
-    assert result[
-        "data"
-    ] == MOCK_TH_OVER_CLIMATE_USER_CONFIG | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_TYPE_CONFIG | {
+    assert result["data"] == MOCK_TH_OVER_CLIMATE_USER_CONFIG | MOCK_TH_OVER_CLIMATE_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_CENTRAL_MAIN_CONFIG | MOCK_TH_OVER_CLIMATE_TYPE_CONFIG | {
        CONF_MINIMAL_ACTIVATION_DELAY: 10,
        CONF_SAFETY_DELAY_MIN: 5,
        CONF_SAFETY_MIN_ON_PERCENT: 0.4,
@@ -1717,6 +1716,7 @@ async def test_user_config_flow_over_climate_valve(
        CONF_TPI_COEF_INT: 0.3,
        CONF_TPI_COEF_EXT: 0.1,
        CONF_MIN_OPENING_DEGREES: "10, 20,0",
+        CONF_AUTO_START_STOP_LEVEL: AUTO_START_STOP_LEVEL_NONE,
    }
    assert result["result"]
    assert result["result"].domain == DOMAIN
--- a/tests/test_motion.py
+++ b/tests/test_motion.py
@@ -347,22 +347,17 @@ async def test_motion_management_time_not_enough(
        assert entity.presence_state == STATE_ON

    # 2. starts detecting motion with time not enough
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ), patch(
        "homeassistant.helpers.condition.state", return_value=False
    ) as mock_condition, patch(
        "homeassistant.core.StateMachine.get",
-        return_value=State(
-            entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF
-        ),
+        return_value=State(entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF),
    ):
        event_timestamp = now - timedelta(minutes=4)
        try_condition = await send_motion_change_event(
@@ -387,14 +382,11 @@ async def test_motion_management_time_not_enough(
        assert mock_send_event.call_count == 0

    # starts detecting motion with time enough this time
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ), patch(
        "homeassistant.helpers.condition.state", return_value=True
@@ -415,22 +407,17 @@ async def test_motion_management_time_not_enough(
        assert entity.presence_state == STATE_ON

    # stop detecting motion with off delay too low
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ) as mock_device_active, patch(
        "homeassistant.helpers.condition.state", return_value=False
    ) as mock_condition, patch(
        "homeassistant.core.StateMachine.get",
-        return_value=State(
-            entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF
-        ),
+        return_value=State(entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF),
    ):
        event_timestamp = now - timedelta(minutes=2)
        try_condition = await send_motion_change_event(
@@ -454,14 +441,11 @@ async def test_motion_management_time_not_enough(
        assert mock_send_event.call_count == 0

    # stop detecting motion with off delay enough long
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ) as mock_device_active, patch(
        "homeassistant.helpers.condition.state", return_value=True
@@ -562,14 +546,11 @@ async def test_motion_management_time_enough_and_presence(
        assert entity.presence_state == "on"

    # starts detecting motion
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ), patch(
        "homeassistant.helpers.condition.state", return_value=True
@@ -590,14 +571,11 @@ async def test_motion_management_time_enough_and_presence(
        assert mock_send_event.call_count == 0

    # stop detecting motion with confirmation of stop
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ), patch(
        "homeassistant.helpers.condition.state", return_value=True
@@ -693,14 +671,11 @@ async def test_motion_management_time_enough_and_not_presence(
        assert entity.presence_state == STATE_OFF

    # starts detecting motion
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ), patch(
        "homeassistant.helpers.condition.state", return_value=True
@@ -722,14 +697,11 @@ async def test_motion_management_time_enough_and_not_presence(
        assert mock_send_event.call_count == 0

    # stop detecting motion with confirmation of stop
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ), patch(
        "homeassistant.helpers.condition.state", return_value=True
@@ -826,14 +798,11 @@ async def test_motion_management_with_stop_during_condition(
        assert entity.presence_state == STATE_OFF

    # starts detecting motion
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ), patch(
        "homeassistant.helpers.condition.state", return_value=True
@@ -959,12 +928,11 @@ async def test_motion_management_with_stop_during_condition_last_state_on(
    # 1. starts detecting motion but the sensor is off
    with patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ), patch("homeassistant.helpers.condition.state", return_value=False), patch(
        "homeassistant.core.StateMachine.get",
-        return_value=State(
-            entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF
-        ),
+        return_value=State(entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF),
    ):
        event_timestamp = now - timedelta(minutes=5)
        try_condition1 = await send_motion_change_event(
@@ -982,12 +950,11 @@ async def test_motion_management_with_stop_during_condition_last_state_on(
    # 2. starts detecting motion but the sensor is on
    with patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ), patch("homeassistant.helpers.condition.state", return_value=False), patch(
        "homeassistant.core.StateMachine.get",
-        return_value=State(
-            entity_id="binary_sensor.mock_motion_sensor", state=STATE_ON
-        ),
+        return_value=State(entity_id="binary_sensor.mock_motion_sensor", state=STATE_ON),
    ):
        event_timestamp = now - timedelta(minutes=5)
        try_condition1 = await send_motion_change_event(
--- a/tests/test_multiple_switch.py
+++ b/tests/test_multiple_switch.py
@@ -2,7 +2,7 @@

 """ Test the Multiple switch management """
 import asyncio
-from unittest.mock import patch, call, ANY
+from unittest.mock import patch, call, ANY, PropertyMock
 from datetime import datetime, timedelta
 import logging

@@ -84,14 +84,11 @@ async def test_one_switch_cycle(
        assert mock_is_state.call_count == 1

    # Set temperature to a low level
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ) as mock_device_active, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.call_later",
@@ -107,7 +104,8 @@ async def test_one_switch_cycle(
        # assert mock_heater_on.call_count == 1
        assert mock_heater_on.call_count == 0
        # There is no check if active
-        assert mock_device_active.call_count == 0
+        # don't work with PropertyMock
+        # assert mock_device_active.call_count == 0

        # 4 calls dispatched along the cycle
        assert mock_call_later.call_count == 1
@@ -119,14 +117,11 @@ async def test_one_switch_cycle(

    # Set a temperature at middle level
    event_timestamp = now - timedelta(minutes=4)
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ) as mock_device_active:
        await send_temperature_change_event(entity, 18, event_timestamp)
@@ -141,14 +136,11 @@ async def test_one_switch_cycle(

    # Set another temperature at middle level
    event_timestamp = now - timedelta(minutes=3)
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ) as mock_device_active:
        await send_temperature_change_event(entity, 18.1, event_timestamp)
@@ -176,14 +168,11 @@ async def test_one_switch_cycle(

    # Simulate the end of heater on cycle
    event_timestamp = now - timedelta(minutes=3)
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ) as mock_device_active:
        await entity.underlying_entity(
@@ -201,14 +190,11 @@ async def test_one_switch_cycle(

    # Simulate the start of heater on cycle
    event_timestamp = now - timedelta(minutes=3)
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ) as mock_device_active:
        await entity.underlying_entity(
@@ -306,14 +292,11 @@ async def test_multiple_switchs(
        )

    # Set temperature to a low level
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ) as mock_device_active, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.call_later",
@@ -329,7 +312,8 @@ async def test_multiple_switchs(
        # assert mock_heater_on.call_count == 1
        assert mock_heater_on.call_count == 0
        # There is no check if active
-        assert mock_device_active.call_count == 0
+        # don't work with PropertyMock
+        # assert mock_device_active.call_count == 0

        # 4 calls dispatched along the cycle
        assert mock_call_later.call_count == 4
@@ -344,14 +328,11 @@ async def test_multiple_switchs(

    # Set a temperature at middle level
    event_timestamp = now - timedelta(minutes=4)
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ) as mock_device_active:
        await send_temperature_change_event(entity, 18, event_timestamp)
@@ -818,7 +799,7 @@ async def test_multiple_switch_power_management(
        with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, \
            patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on") as mock_heater_on, \
            patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, \
-            patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", return_value="True"):
+            patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", new_callable=PropertyMock, return_value=True):
        #fmt: on
            now = now + timedelta(seconds=30)
            VersatileThermostatAPI.get_vtherm_api()._set_now(now)
--- a/tests/test_overclimate.py
+++ b/tests/test_overclimate.py
@@ -1233,3 +1233,111 @@ async def test_manual_hvac_off_should_take_the_lead_over_auto_start_stop(
        assert vtherm.hvac_off_reason == HVAC_OFF_REASON_MANUAL
        assert vtherm._saved_hvac_mode == HVACMode.OFF
        assert mock_send_event.call_count == 0  # nothing have change
+
+
+@pytest.mark.parametrize("expected_lingering_tasks", [True])
+@pytest.mark.parametrize("expected_lingering_timers", [True])
+async def test_underlying_from_comes_back_to_life(
+    hass: HomeAssistant,
+    skip_hass_states_is_state,
+    skip_turn_on_off_heater,
+    skip_send_event,
+):
+    """Test that when a underlying climate comes back to life (from unkwown or unavailable) the last state is send"""
+
+    tz = get_tz(hass)  # pylint: disable=invalid-name
+    now: datetime = datetime.now(tz=tz)
+
+    entry = MockConfigEntry(
+        domain=DOMAIN,
+        title="TheOverClimateMockName",
+        unique_id="uniqueId",
+        data={
+            CONF_NAME: "TheOverClimateMockName",
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_CLIMATE,
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            CONF_USE_WINDOW_FEATURE: False,
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_AUTO_START_STOP_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+            CONF_UNDERLYING_LIST: ["climate.mock_climate"],
+            CONF_MINIMAL_ACTIVATION_DELAY: 30,
+            CONF_SAFETY_DELAY_MIN: 5,
+            CONF_SAFETY_MIN_ON_PERCENT: 0.3,
+            CONF_AUTO_FAN_MODE: CONF_AUTO_FAN_NONE,
+            CONF_AC_MODE: True,
+        },  # 5 minutes security delay
+    )
+
+    # Underlying is in HEAT mode but should be shutdown at startup
+    fake_underlying_climate = MockClimate(hass, "mockUniqueId", "MockClimateName", {}, HVACMode.COOL, HVACAction.COOLING)
+
+    # 1. initialize the vtherm in COOL with Boost
+    # fmt: off
+    with patch("custom_components.versatile_thermostat.underlyings.UnderlyingClimate.find_underlying_climate",return_value=fake_underlying_climate) as mock_find_climate:
+    # fmt: on
+        entity = await create_thermostat(hass, entry, "climate.theoverclimatemockname", temps=default_temperatures_ac)
+
+        assert entity
+        assert entity.name == "TheOverClimateMockName"
+        assert entity.is_over_climate is True
+
+        # Set hvac_mode to COOL
+        await entity.async_set_hvac_mode(HVACMode.COOL)
+        await entity.async_set_preset_mode(PRESET_BOOST)
+
+        # it is very hot today
+        await send_temperature_change_event(entity, 27, now, False)
+        await send_ext_temperature_change_event(entity, 35, now, False)
+        await hass.async_block_till_done()
+
+        assert entity.hvac_mode is HVACMode.COOL
+        # because in MockClimate HVACAction is HEATING if hvac_mode is not set
+        assert entity.hvac_action is HVACAction.COOLING
+        assert entity.preset_mode is PRESET_BOOST
+        assert entity.target_temperature == 23
+
+
+    # 2. send under state event comes back from life
+    # fmt: off
+    with patch("custom_components.versatile_thermostat.underlyings.UnderlyingClimate.set_hvac_mode") as mock_underlying_set_hvac_mode, \
+        patch("custom_components.versatile_thermostat.underlyings.UnderlyingClimate.set_temperature") as mock_underlying_set_temperature:
+    # fmt: on
+        now  = now + timedelta(minutes=2)
+        # 2. Change the target temp of underlying thermostat at now -> the event will be disgarded because to fast (to avoid loop cf issue 121)
+        await send_climate_change_event_with_temperature(
+            entity,
+            HVACMode.HEAT,
+            STATE_UNKNOWN,
+            HVACAction.OFF,
+            STATE_UNKNOWN,
+            now,
+            entity.min_temp + 1,
+            True,
+            "climate.mock_climate",  # the underlying climate entity id
+        )
+
+        assert mock_underlying_set_hvac_mode.call_count == 1
+        mock_underlying_set_hvac_mode.assert_has_calls(
+            [
+                call.set_hvac_mode(HVACMode.COOL),
+            ]
+        )
+
+        assert mock_underlying_set_temperature.call_count == 1
+        mock_underlying_set_temperature.assert_has_calls(
+            [
+                call.set_temperature(23, 30, 15),
+            ]
+        )
+
+
+        # Nothing should have changed
+        assert entity.target_temperature == 23
+        assert entity.preset_mode is PRESET_BOOST
+        assert entity.hvac_mode is HVACMode.COOL
--- a/tests/test_power.py
+++ b/tests/test_power.py
@@ -523,7 +523,7 @@ async def test_power_management_hvac_on(
        patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, \
        patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on") as mock_heater_on, \
        patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, \
-        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", return_value="True"):
+        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", new_callable=PropertyMock, return_value=True):
    # fmt: on
        now = now + timedelta(seconds=30)
        VersatileThermostatAPI.get_vtherm_api()._set_now(now)
@@ -913,12 +913,15 @@ async def test_power_management_turn_off_while_shedding(hass: HomeAssistant, ski

    # 1. Set VTherm to overpowering
    # Send power max mesurement too low and HVACMode is on and device is active
+
+    #
+    #
    # fmt:off
    with patch("homeassistant.core.StateMachine.get", side_effect=side_effects.get_side_effects()), \
        patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"), \
        patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on") as mock_heater_on, \
        patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, \
-        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", return_value="True"):
+        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", new_callable=PropertyMock, return_value=True):
    # fmt: on
        now = now + timedelta(seconds=30)
        VersatileThermostatAPI.get_vtherm_api()._set_now(now)
@@ -939,7 +942,7 @@ async def test_power_management_turn_off_while_shedding(hass: HomeAssistant, ski
        patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, \
        patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on") as mock_heater_on, \
        patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, \
-        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", return_value="True"):
+        patch("custom_components.versatile_thermostat.thermostat_switch.ThermostatOverSwitch.is_device_active", new_callable=PropertyMock, return_value=True):
    # fmt: on
        now = now + timedelta(seconds=30)
        VersatileThermostatAPI.get_vtherm_api()._set_now(now)
--- a/tests/test_window.py
+++ b/tests/test_window.py
@@ -2039,16 +2039,13 @@ async def test_bug_66(
    assert entity.window_state is STATE_UNKNOWN

    # Open the window and let the thermostat shut down
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "homeassistant.helpers.condition.state", return_value=True
    ) as mock_condition, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=True,
    ):
        await send_temperature_change_event(entity, 15, now)
@@ -2067,16 +2064,13 @@ async def test_bug_66(
        assert entity.window_state == STATE_ON

    # Close the window but too shortly
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "homeassistant.helpers.condition.state", return_value=False
    ) as mock_condition, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ):
        event_timestamp = now + timedelta(minutes=1)
@@ -2090,16 +2084,13 @@ async def test_bug_66(
        assert entity.window_state == STATE_ON

    # Reopen immediatly with sufficient time
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "homeassistant.helpers.condition.state", return_value=True
    ) as mock_condition, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ):
        try_window_condition = await send_window_change_event(
@@ -2113,16 +2104,13 @@ async def test_bug_66(
        assert entity.hvac_mode == HVACMode.OFF

    # Close the window but with sufficient time this time
-    with patch(
-        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
-    ) as mock_send_event, patch(
+    with patch("custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event") as mock_send_event, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
-    ) as mock_heater_on, patch(
-        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
-    ) as mock_heater_off, patch(
+    ) as mock_heater_on, patch("custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off") as mock_heater_off, patch(
        "homeassistant.helpers.condition.state", return_value=True
    ) as mock_condition, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        new_callable=PropertyMock,
        return_value=False,
    ):
        event_timestamp = now + timedelta(minutes=2)
Author	SHA1	Message	Date
Jean-Marc Collin	ebc2d8b6ac	Release 7.1.6	2025-01-25 10:57:47 +00:00
Jean-Marc Collin	cf4cc32b13	Typos	2025-01-25 10:56:42 +00:00
Jean-Marc Collin	2523fc74c2	Update over-climate.md Add precision on "use internal device temp"	2025-01-25 11:41:11 +01:00
Jean-Marc Collin	87de91c2c5	Update over-climate.md Add precision to "use internal device temp"	2025-01-25 11:40:10 +01:00
Jean-Marc Collin	a3b6f66f1b	Issue #846 - swicth Eco preset after Window close event (#868 ) Co-authored-by: Jean-Marc Collin <jean-marc.collin-extern@renault.com>	2025-01-25 11:09:34 +01:00
Jean-Marc Collin	8cf09e5254	Update self-regulation.md	2025-01-25 09:22:13 +01:00
Jean-Marc Collin	0b67226666	Update self-regulation.md	2025-01-25 09:21:24 +01:00
Jean-Marc Collin	812bb19e10	Update self-regulation.md Precision on min opening values	2025-01-25 09:18:28 +01:00
Eric Scherlinger	be3012af71	Fixes on FR translation (#851 )	2025-01-21 21:02:51 +01:00
Jean-Marc Collin	05fe2055e2	[Feature Request] - Pwoer shedding should prevent all VTherm to start at the same time (#845 ) Fixes #844 Co-authored-by: Jean-Marc Collin <jean-marc.collin-extern@renault.com>	2025-01-19 20:45:37 +01:00
Jean-Marc Collin	8743872c09	Add config.yml into ISSUE_TEMPLATE	2025-01-19 16:30:16 +00:00
Jean-Marc Collin	c4a1631d29	[Feature Request] - Resend state to underlying device is device switch from Unknown state. (#841 ) Fixes #829 Co-authored-by: Jean-Marc Collin <jean-marc.collin-extern@renault.com>	2025-01-18 18:02:40 +01:00
Jean-Marc Collin	d1ef83f422	`hvac_off_reason` could stay at `auto_start_stop` when the VTherm is 'on' (hvac_mode=Heat) (#840 ) Fixes #828 Co-authored-by: Jean-Marc Collin <jean-marc.collin-extern@renault.com>	2025-01-18 16:34:44 +01:00
Jean-Marc Collin	42ac2b0f98	#823 - window configuration don't hold on VTherm configuration (#839 ) * Improve documentation * Fix should be not possible to validate a VTherm without underlyings --------- Co-authored-by: Jean-Marc Collin <jean-marc.collin-extern@renault.com>	2025-01-18 13:01:31 +01:00