feat: GUI rework

rog-control-center toast message update

See merge request asus-linux/asusctl!248

.cargo-husky/hooks/post-commit

@@ -0,0 +1,53 @@
+#!/bin/sh
+set -e
+
+ROOT_DIR=$(git rev-parse --show-toplevel)
+AURA_DATA="${ROOT_DIR}/rog-aura/data/aura_support.ron"
+SPEC_FILE="${ROOT_DIR}/distro-packaging/asusctl.spec"
+TRANSLATION="${ROOT_DIR}/rog-control-center/translations/en/rog-control-center.po"
+VERSION=$(grep -Pm1 'version = "(\d+.\d+.\d+.*)"' "${ROOT_DIR}/Cargo.toml" | cut -d'"' -f2)
+
+if [ -z "$VERSION" ]; then
+    echo "Error: Could not extract version from Cargo.toml"
+    exit 1
+fi
+if [ ! -f "$SPEC_FILE" ]; then
+    echo "Error: Spec file not found at ${SPEC_FILE}"
+    exit 1
+fi
+
+# Update spec file
+sed -i "s/^%define version.*/%define version ${VERSION}/" "$SPEC_FILE"
+if git diff --quiet "$SPEC_FILE"; then
+    echo "No changes to spec file"
+else
+    git add "$SPEC_FILE"
+    git commit --no-verify -m "chore: update spec file version to ${VERSION}"
+    echo "Updated spec file version to ${VERSION}"
+fi
+
+# Update translations only if UI files changed
+if git diff-tree -r HEAD@{1} HEAD --name-only | grep -q "^rog-control-center/ui/"; then
+    echo 'find -name \*.slint | xargs slint-tr-extractor -o ${TRANSLATION}'
+    find -name \*.slint | xargs slint-tr-extractor -o $TRANSLATION
+    if git diff --quiet "$TRANSLATION"; then
+        echo "No changes to translation file"
+    else
+        git add "$TRANSLATION"
+        git commit --no-verify -m "chore: update translations"
+        echo "Updated ${TRANSLATION}"
+    fi
+else
+    echo "No changes in rog-control-center/ui/, skipping translation update"
+fi
+
+# Update aura data
+cargo test --package rog_aura --lib -- aura_detection::tests::check_data_file_parse --exact
+cargo test --package rog_aura --lib -- aura_detection::tests::find_data_file_groups --exact
+if git diff --quiet "$AURA_DATA"; then
+    echo "No changes to aura data file"
+else
+    git add "$AURA_DATA"
+    git commit --no-verify -m "chore: update aura data"
+    echo "Updated $AURA_DATA"
+fi

.cargo-husky/hooks/pre-commit

@@ -1,18 +1,6 @@
 #!/bin/sh
-
 set -e
 
-echo 'find -name \*.slint | xargs slint-tr-extractor -o rog-control-center/translations/en/rog-control-center.po'
-find -name \*.slint | xargs slint-tr-extractor -o rog-control-center/translations/en/rog-control-center.po
-
-echo '+cargo +nightly fmt --all -- --check'
-cargo +nightly fmt --all -- --check
-
-echo '+cargo clippy --all -- -D warnings'
-cargo clippy --all -- -D warnings
-
-echo '+cargo test --all'
-cargo test --all
-
-echo '+cargo cranky'
-cargo cranky
+echo '+cargo fmt --all -- --check'
+cargo fmt --all -- --check
+git add -u

.cargo-husky/hooks/pre-push

@@ -2,8 +2,8 @@
 
 set -e
 
-echo '+cargo +nightly fmt --all -- --check'
-cargo +nightly fmt --all -- --check
+echo '+cargo fmt --all -- --check'
+cargo fmt --all -- --check
 echo '+cargo clippy --all -- -D warnings'
 cargo clippy --all -- -D warnings
 echo '+cargo cranky'

.gitignore

@@ -9,6 +9,7 @@ vendor_*
 .vscode
 .~lock.*
 *.ods#
+*.patch
 
 # gnome extension
 node-modules

.gitlab-ci.yml

@@ -1,23 +1,27 @@
 image: rust:latest
 
+# Use shallow clone to reduce checkout size
+variables:
+  GIT_DEPTH: "1"
+  # Put cargo home and target under project dir so we can clean them easily
+  CARGO_HOME: "$CI_PROJECT_DIR/.cargo"
+  CARGO_TARGET_DIR: "$CI_PROJECT_DIR/ci-target"
+  GIT_SUBMODULE_STRATEGY: normal
+
+# Cache only cargo registries/git metadata to speed dependency fetches.
+# Avoid caching compiled `target` artifacts which are large and easily fill disk.
 .rust_cache: &rust_cache
   cache:
-    # key: $CI_COMMIT_REF_SLUG
+    key: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG"
     paths:
-      # Don't include `incremental` to save space
-      # Debug
-      - target/debug/build/
-      - target/debug/deps/
-      - target/debug/.fingerprint/
-      - target/debug/.cargo-lock
-      # Release
-      - target/release/build/
-      - target/release/deps/
-      - target/release/.fingerprint/
-      - target/release/.cargo-lock
+      - .cargo/registry
+      - .cargo/git
 
 before_script:
-  - apt-get update -qq && apt-get install -y -qq libinput-dev libseat-dev libudev-dev libgtk-3-dev grep llvm clang libclang-dev libsdl2-dev libsdl2-gfx-dev
+  - df -h
+  - echo "Cleaning stale targets to free space if present"
+  - rm -rf "$CI_PROJECT_DIR/target" "$CI_PROJECT_DIR/ci-target" || true
+  - apt-get update -qq && apt-get install -y -qq libudev-dev libgtk-3-dev grep llvm clang libclang-dev libsdl2-dev libsdl2-gfx-dev
 
 stages:
   - format
@@ -31,20 +35,24 @@ format:
     - tags
   <<: *rust_cache
   script:
-    - echo "nightly" > rust-toolchain
-    - rustup component add rustfmt
+    - rustup component add rustfmt || true
     - cargo fmt --check
+  after_script:
+    - du -sh "$CI_PROJECT_DIR/ci-target" || true
+    - rm -rf "$CI_PROJECT_DIR/ci-target" || true
 
 check:
   except:
     - tags
   <<: *rust_cache
   script:
-    - rustup component add clippy
-    - cargo check
+    - rustup component add clippy || true
+    - cargo check --locked --workspace
     # deny currently catches too much
     #- cargo install cargo-deny && cargo deny
     - cargo install cargo-cranky && cargo cranky
+  after_script:
+    - rm -rf "$CI_PROJECT_DIR/ci-target" || true
 
 test:
   except:
@@ -52,7 +60,9 @@ test:
   <<: *rust_cache
   script:
     - mkdir -p .git/hooks > /dev/null
-    - cargo test --all
+    - cargo test --locked --all
+  after_script:
+    - rm -rf "$CI_PROJECT_DIR/ci-target" || true
 
 release:
   only:
@@ -60,11 +70,15 @@ release:
   <<: *rust_cache
   script:
     - cargo install cargo-vendor-filterer
-    - make && make vendor
+    - cargo fetch
+    - make FROZEN=1 && make vendor
   artifacts:
     paths:
       - vendor_asusctl*.tar.xz
       - cargo-config
+    expire_in: 1 week
+  after_script:
+    - rm -rf vendor vendor_asusctl*.tar.xz "$CI_PROJECT_DIR/ci-target" || true
 
 pages:
   stage: deploy
@@ -72,14 +86,14 @@ pages:
     - tags
   <<: *rust_cache
   script:
-    - cargo doc --document-private-items --no-deps --workspace
+    - cargo doc --locked --document-private-items --no-deps --workspace
     - rm -rf public
     - mkdir public
-    - cp -R target/doc/* public
-    - cp extra/index.html public
+    - cp -R ci-target/doc/* public
+    - if [ -f extra/index.html ]; then cp extra/index.html public; else echo "no extra/index.html to copy"; fi
   artifacts:
     paths:
       - public
-
-variables:
-  GIT_SUBMODULE_STRATEGY: normal
+    expire_in: 1 week
+  after_script:
+    - rm -rf "$CI_PROJECT_DIR/ci-target" || true

CHANGELOG.md

@@ -1,11 +1,315 @@
 # Changelog
 
-All notable changes to this project will be documented in this file.
+## [6.3.2]
 
-The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
-and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+### Changes
+- Improve the notification area, @shevchenko0013 strikes again!
+- Improve firmware attributes handling
 
-## [Unreleased]
+## [6.3.1]
+
+### Changes
+- Removed a lighting mode that is unavailable in windows to G835L: thanks to @shevchenko0013 again!
+- Added translations for Ukranian language, thanks @shevchenko0013!
+- Added LEDs definition for G615LR, thanks @btnrv
+- Fix improper usage of Quiet when only LowPower is available
+
+## [6.3.0]
+
+### Changed
+- Added support for TUF keyboard powerstate control
+- Improved AniMe Matrix support thanks to @Seom1177 !
+- Fixed a bug with one-shot battery change, thanks @bitr8 !
+- Changed the CLI interface of asusctl to be less confusing
+- Added support for G835L, thanks to @shevchenko0013 !
+
+## [6.2.0]
+
+### Changed
+- Added aura support for FX607V: thanks @jomp16
+- Added testing support for G835LW
+- Added support for GU605C models slash lighting: thanks @Otters
+- Restore fedora: thanks @ali205412
+- Add support to G614F models slash lighting
+
+## [6.1.22]
+
+### Changed
+- Allow configuration of nv_tgp
+- Treat dGPU attributes as power profiles
+- Add EXPERTBOOK DMI match to ensure the service is loaded
+- Support G815L thanks to @solost !
+
+## [6.1.21]
+
+### Changed
+- Kill Fedora: screw your cursed cargo bullshit
+- Restore CI building
+
+## [6.1.20]
+
+### Changed
+- Addded support for G635L: thanks @luca_pisl !
+- Suppress verbose output in applications too, not just daemon
+
+## [6.1.18]
+
+### Changed
+- Add aura support for G614FR (ROG Strix G16 2025)
+- all notifications now respects the timeout 
+- improve udev daemon-starting rule
+- reduce log noise
+
+## [v6.1.17]
+
+### Changed
+- Fix Makefile
+- Share a single HID device
+
+## [v6.1.16]
+
+### Changed
+- Expose more properties via rog-control-center
+- Add support for a few more models
+
+## [v6.1.15]
+
+### Changed
+- Reflect the current asus-armoury status on AC plug connection status change
+
+## [v6.1.14]
+
+### Changed
+- Fix formatting
+- Attempt to fix tests
+
+## [v6.1.13]
+
+### Changed
+- Fix a problem in reloading the service (@evertvorster)
+- Add Azerbaijani language (@rashadgasimli)
+- Add Ubuntu installation instructions
+
+## [v6.1.12]
+
+### Changed
+- Fix an unbounded event loop caused by other processes causing a "modify" event on the screen backlight brightness.
+
+## [v6.1.11]
+
+### Changed
+- Fix anime flickering issue when using custom anims (@I-Al-Istannen)
+- Include pt_BR translations file (@PabloKiryu)
+
+## Added
+- Support for the screenpad brightness on some Laptops. This includes syncing to the primary screen brightness, and a gamma adjustment to set brightness scaling.
+  - Add asusctl CLI options
+  - Add UI options
+  - Add a fake gamma correction (`asusctl backlight --sync-screenpad-brightness`, 1.5 for example sets screenpad low brightness lower than primary, and scales upwards)
+
+### Changed
+- asusd: single line fix for profile switching
+
+## [v6.1.9]
+
+### Changed
+- ROGCC: better handling of platform profiles
+
+## [v6.1.8]
+
+### Changed
+- Testing CI for opensuse RPM build
+- ROGCC: Fixes to showing the PPT enablement toggle
+- ROGCC: Fixes to how PPT and NV sliders work and enable/disable
+- RGOCC: Fix quiet fan-curves availability
+
+## [v6.1.7]
+
+### Changed
+- Fix Slash display enable
+
+## [v6.1.6]
+
+### Changed
+- Disable skia bindings for UI again. It causes failures in build pipelines and requires extra dependencies.
+
+## [v6.1.5]
+
+### Changed
+- Update dependencies
+- Fix fan-curve proxy type signatures
+
+## [v6.1.4]
+
+### Changed
+- Fix git doing me a dirty
+
+## [v6.1.3]
+
+### Changed
+- Many small bugfixes such as for platform profile switching
+
+## [v6.1.2]
+
+### Changed
+- Try a slightly different tact to fix charge control slider
+
+## [v6.1.1]
+
+### Changed
+- Fix aura data matching
+- Fix charge control slider
+
+## [v6.1.0]
+
+### Changed
+- Update deps
+- Add support for G513RC RGB modes
+- Many UI fixes
+- Fixes to PPT settings in UI
+
+## [v6.1.0-rc7]
+
+- Refactor PPT handling more:
+  1. Per profile, per-ac/dc
+  2. Do not apply unless group is enabled
+  3. Better reset/disable handling
+  4. Selecting a profile defaults PPT to off/disabled
+- Bugfix: prevent an AniMe thread async deadlock
+
+## [v6.1.0-rc6]
+
+### Changed
+- Two small fixes, one for `low-power` profile name, and one for base gpu tdp
+- Move to using platform_profile api only (no throttle_thermal_policy)
+
+## [v6.1.0-rc5]
+
+### Changed
+- Per-AC/DC, per-profile tunings enabled (Battery vs AC power +  platform profile)
+- Add ability to restore PPT defaults
+- Add PPT help dialogue to UI
+- Bug fix: correctly set charge limit from UI
+
+## [v6.1.0-rc4]
+
+### Changed
+- Bug fix: UI was setting incorrect value for FPPT
+- Bug fix: Re-add callbacks for the throttle and epp settings in UI
+- Bug fix: Fix UI settigns for AniMe Matrix display
+- Bug fix: better handle missing tray (for example gnome)
+- Strip out all outdated and unsafe tuning stuff
+- Allow each performance profile to have different PPT settings
+
+## [v6.1.0-rc3]
+
+### Changed
+- Bug fixes
+- Partial support for per-profile CPU tunings (WIP)
+
+## [v6.1.0-rc2]
+
+### Added
+- asus-armoury driver support. WIP, will be adjusted/changed further
+- More "Slash" display controls
+
+## [v6.1.0-rc1]
+
+### Added
+- ROG Arion external driver LED support
+- Add GA605W LED layout
+- Add GA605 + GU605 Slash support
+
+### Changed
+- Fix attribute writes. At some point the kernel API seems to have changed.
+- Extremely large refactor of Aura device handling. Should enable easy add of different kinds now.
+- Rename CLI args for aura related properties. This will likely change further as more devices are added
+
+## [v6.0.12]
+
+### Changed
+- Add Ally X aura config
+- Fixes to Ally led power configs
+- Fix CLI led modes
+- Add FX517Z to aura_support
+- Add G614JJ Aura support
+- Add G614JZ (2023 Strix G16) Aura support
+
+## [v6.0.11]
+
+### Changed
+- Renamed `Strobe` effect to `RainbowCycle` to prevent confusion over what it is
+- Ranamed `Rainbow` effect to `RainbowWave`
+- Cleaned up serde crate deps
+- Fixed AniMe on GA402XZ
+- Update some of the G713 device aura features
+- Update some of the G513 device aura features
+
+## [v6.0.10]
+
+### Added
+- Add the GA401I model to aura_support.
+
+### Changed
+
+- Aura support return a default aura definition instead of nothing
+- Minor updates in aura controller to ensure configs are updated if the support file changes
+- Don't panic if -ENODEV on fan_curve enable
+- Adjust the G513Q support to match what is on the asus website.
+- Adjust init sequence of anime to prevent accidental use of Slash as Anime
+- Enable notifs and tray icon without supergfx
+
+## [v6.0.9]
+
+### Added
+
+- Add G513RS to laptop DB.
+- Add G512LI to laptop DB.
+
+### Changed
+
+- Rename and recreate the default Anime config if cache setup fails
+
+### Fixed
+
+- Nuke the issue of GUI taking 100% of a CPU core
+
+## [v6.0.8]
+
+### Added
+- Add G512L laptop DB entry
+
+### Changed
+- Add more tests to verify things
+
+### Fix
+- asusctl incorrectly assumes fan-curves unsupported. Now fixed.
+- try to fix ROGCC using CPU time.
+
+## [v6.0.7]
+
+### Changed
+
+- Add a config option to set if throttle policy is changed on ac/bat change (UI only)
+- Allow X11 GUI. This is *not* supported. Please see readme.
+- Fixes to some GUI widget layouts and sizing
+- Do a backup HID raw write fro brightness if the read-back value does not match. This is a temporary solve for some G14 and G16 until the kernel patch is ready.
+- Reimplement the older 0x1866 MCU keyboard control power bits plus UI control for it. If you had a keyboard affected by Lightbar issues and it is older than a couple of years this should help. If not, please file a bug.
+
+## [v6.0.6]
+
+### Added
+- Add GX650R laptop to aura DB
+
+### Changed
+- Further tweaks to aura init
+- More logging
+- Fix TUF laptop led power
+- Sanitize the dbus path for aura devices (remove `.` chars)
+- Even more error handling (gracefully)
+- Better checking for dbus interfaces
+- Remove dbus `supported_interfaces`
+- dbus ObjectManager is now at root `/`
 
 ## [v6.0.5]
 

Cargo.toml

@@ -1,59 +1,57 @@
 [workspace.package]
-version = "6.0.5"
-rust-version = "1.77"
+version = "6.3.1"
+rust-version = "1.82"
 license = "MPL-2.0"
 readme = "README.md"
-authors = ["Luke <luke@ljones.dev>"]
+authors = [
+  "Luke <luke@ljones.dev>",
+  "Denis Benato <benato.denis96@gmail.com>"
+]
 repository = "https://gitlab.com/asus-linux/asusctl"
 homepage = "https://gitlab.com/asus-linux/asusctl"
 description = "Laptop feature control for ASUS ROG laptops and others"
 edition = "2021"
 
 [workspace]
-members = [
-    "asusctl",
-    "asusd",
-    "asusd-user",
-    "config-traits",
-    "cpuctl",
-    "dmi-id",
-    "rog-platform",
-    "rog-dbus",
-    "rog-anime",
-    "rog-aura",
-    "rog-profiles",
-    "rog-control-center",
-    "rog-slash",
-    "simulators",
-]
-default-members = [
-    "asusctl",
-    "asusd",
-    "asusd-user",
-    "cpuctl",
-    "rog-control-center",
-]
 resolver = "2"
+members = [
+  "asusctl",
+  "asusd",
+  "asusd-user",
+  "config-traits",
+  "dmi-id",
+  "rog-platform",
+  "rog-dbus",
+  "rog-anime",
+  "rog-aura",
+  "rog-profiles",
+  "rog-control-center",
+  "rog-slash",
+  "simulators",
+  "rog-scsi",
+]
+
+default-members = ["asusctl", "asusd", "asusd-user", "rog-control-center"]
 
 [workspace.dependencies]
-tokio = { version = "^1.36.0", default-features = false, features = [
-    "macros",
-    "sync",
-    "time",
-    "rt-multi-thread",
+tokio = { version = "^1.39.0", default-features = false, features = [
+  "macros",
+  "sync",
+  "time",
+  "rt",
+  "rt-multi-thread",
 ] }
 concat-idents = "^1.1"
 dirs = "^4.0"
-smol = "^1.3"
+smol = "^2.0"
 mio = "0.8.11"
 
-zbus = "4.1"
-logind-zbus = { version = "4.0.2" } #, default-features = false, features = ["non_blocking"] }
+futures-util = "0.3.31"
+zbus = "5.13.1"
+logind-zbus = { version = "5.2.0" } #, default-features = false, features = ["non_blocking"] }
 
-serde = "^1.0"
-serde_derive = "^1.0"
+serde = { version = "^1.0", features = ["serde_derive"] }
 ron = "*"
-typeshare = "1.0.0"
 
 log = "^0.4"
 env_logger = "^0.10.0"
@@ -62,18 +60,18 @@ glam = { version = "^0.22", features = ["serde"] }
 gumdrop = "^0.8"
 udev = { version = "^0.8", features = ["mio"] }
 rusb = "^0.9"
-inotify = "^0.10.0"
+inotify = "^0.10"
 
 png_pong = "^0.8"
 pix = "^0.13"
-tinybmp = "^0.4.0"
-gif = "^0.12.0"
+tinybmp = "^0.4"
+gif = "^0.12"
 
 versions = "6.2"
 
-notify-rust = { git = "https://github.com/flukejones/notify-rust.git", rev = "54176413b81189a3e4edbdc20a0b4f7e2e35c063", default-features = false, features = [
-    "z",
-] }
+notify-rust = { version = "4.11.5", features = ["z", "async"] }
+
+sg = { git = "https://github.com/flukejones/sg-rs.git" }
 
 [profile.release]
 # thin = 57s, asusd = 9.0M
@@ -82,15 +80,15 @@ lto = "fat"
 debug = false
 opt-level = 3
 panic = "abort"
-codegen-units = 1
+# codegen-units = 1
 
 [profile.dev]
 opt-level = 1
-codegen-units = 16
+# codegen-units = 1
 
 [profile.dev.package."*"]
 opt-level = 1
-codegen-units = 16
+# codegen-units = 1
 
 [profile.bench]
 debug = false

MANUAL.md

@@ -48,7 +48,7 @@ The LED controller (e.g, aura) enables setting many of the factory modes availab
 
 #### Supported laptops
 
-There are over 60 supported laptops as of 01-01-2023. Please see [the rog-aura crate readme for further details](/rog-aura/README.md).
+There are over 80 supported laptops as of 01-01-2023. Please see [the rog-aura crate readme for further details](/rog-aura/README.md).
 
 ### Charge control
 
@@ -420,13 +420,13 @@ To switch to next/previous Aura modes you will need to bind both the aura keys (
 **Next**
 
 ```
-asusctl led-mode -n
+asusctl aura -n
 ```
 
 **Previous**
 
 ```
-asusctl led-mode -p
+asusctl aura -p
 ```
 
 To switch Fan/Thermal profiles you need to bind the Fn+F5 key to `asusctl profile -n`.

Makefile

@@ -1,4 +1,4 @@
-VERSION := $(shell /usr/bin/grep -Pm1 'version = "(\d.\d.\d)"' Cargo.toml | cut -d'"' -f2)
+VERSION := $(shell /usr/bin/grep -Pm1 'version = "(\d+.\d+.\d+.*)"' Cargo.toml | cut -d'"' -f2)
 
 INSTALL = install
 INSTALL_PROGRAM = ${INSTALL} -D -m 0755
@@ -17,6 +17,8 @@ BIN_D := asusd
 BIN_U := asusd-user
 LEDCFG := aura_support.ron
 
+DESTDIR_REALPATH = $(shell realpath $(DESTDIR))
+
 SRC := Cargo.toml Cargo.lock Makefile $(shell find -type f -wholename '**/src/*.rs')
 
 STRIP_BINARIES ?= 0
@@ -30,6 +32,20 @@ else
 	TARGET = debug
 endif
 
+X11 ?= 0
+ifeq ($(X11),1)
+	ARGS += --features "rog-control-center/x11"
+endif
+
+# Always use the versions in Cargo.lock by default
+ARGS += --locked
+
+# Allow optionally freezing the build to avoid any network access and enforce Cargo.lock strictly
+FROZEN ?= 0
+ifeq ($(FROZEN),1)
+	ARGS += --frozen
+endif
+
 VENDORED ?= 0
 ifeq ($(VENDORED),1)
 	ARGS += --frozen
@@ -43,24 +59,38 @@ clean:
 distclean:
 	rm -rf .cargo vendor vendor.tar.xz
 
-install-program:
-	$(INSTALL_PROGRAM) "./target/$(TARGET)/$(BIN_ROG)" "$(DESTDIR)$(bindir)/$(BIN_ROG)"
+target/$(TARGET)/$(BIN_D): $(SRC)
+	$(MAKE) build
 
-	$(INSTALL_PROGRAM) "./target/$(TARGET)/$(BIN_C)" "$(DESTDIR)$(bindir)/$(BIN_C)"
+target/$(TARGET)/$(BIN_C): $(SRC)
+	$(MAKE) build
+
+target/$(TARGET)/$(BIN_U): $(SRC)
+	$(MAKE) build
+
+target/$(TARGET)/$(BIN_ROG): $(SRC)
+	$(MAKE) build
+
+install-asusd: target/$(TARGET)/$(BIN_D)
 	$(INSTALL_PROGRAM) "./target/$(TARGET)/$(BIN_D)" "$(DESTDIR)$(bindir)/$(BIN_D)"
+
+install-asusctl: target/$(TARGET)/$(BIN_C)
+	$(INSTALL_PROGRAM) "./target/$(TARGET)/$(BIN_C)" "$(DESTDIR)$(bindir)/$(BIN_C)"
+
+install-asusd_user: target/$(TARGET)/$(BIN_U)
 	$(INSTALL_PROGRAM) "./target/$(TARGET)/$(BIN_U)" "$(DESTDIR)$(bindir)/$(BIN_U)"
 
-install-data:
+install-rog_gui: target/$(TARGET)/$(BIN_ROG)
+	$(INSTALL_PROGRAM) "./target/$(TARGET)/$(BIN_ROG)" "$(DESTDIR)$(bindir)/$(BIN_ROG)"
+
+.PHONY: install-asusd install-asusctl install-asusd_user install-rog_gui
+
+install-program: install-asusd install-asusctl install-asusd_user install-rog_gui
+
+install-data-rog_gui:
 	$(INSTALL_DATA) "./rog-control-center/data/$(BIN_ROG).desktop" "$(DESTDIR)$(datarootdir)/applications/$(BIN_ROG).desktop"
 	$(INSTALL_DATA) "./rog-control-center/data/$(BIN_ROG).png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/$(BIN_ROG).png"
-	cd rog-aura/data/layouts && find . -type f -name "*.ron" -exec $(INSTALL_DATA) "{}" "$(DESTDIR)$(datarootdir)/rog-gui/layouts/{}" \;
-
-	$(INSTALL_DATA) "./data/$(BIN_D).rules" "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
-	$(INSTALL_DATA) "./rog-aura/data/$(LEDCFG)" "$(DESTDIR)$(datarootdir)/asusd/$(LEDCFG)"
-	$(INSTALL_DATA) "./data/$(BIN_D).conf" "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
-
-	$(INSTALL_DATA) "./data/$(BIN_D).service" "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
-	$(INSTALL_DATA) "./data/$(BIN_U).service" "$(DESTDIR)$(libdir)/systemd/user/$(BIN_U).service"
+	cd rog-aura/data/layouts && find . -type f -name "*.ron" -exec $(INSTALL_DATA) "{}" "$(DESTDIR_REALPATH)$(datarootdir)/rog-gui/layouts/{}" \;
 
 	$(INSTALL_DATA) "./data/icons/asus_notif_yellow.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_yellow.png"
 	$(INSTALL_DATA) "./data/icons/asus_notif_green.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_green.png"
@@ -76,9 +106,24 @@ install-data:
 	$(INSTALL_DATA) "./data/icons/scalable/gpu-vfio.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/gpu-vfio.svg"
 	$(INSTALL_DATA) "./data/icons/scalable/notification-reboot.svg" "$(DESTDIR)$(datarootdir)/icons/hicolor/scalable/status/notification-reboot.svg"
 
-	cd rog-anime/data && find "./anime" -type f -exec $(INSTALL_DATA) "{}" "$(DESTDIR)$(datarootdir)/asusd/{}" \;
+install-data-asusd:
+	$(INSTALL_DATA) "./data/$(BIN_D).rules" "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
+	$(INSTALL_DATA) "./rog-aura/data/$(LEDCFG)" "$(DESTDIR)$(datarootdir)/asusd/$(LEDCFG)"
+	$(INSTALL_DATA) "./data/$(BIN_D).conf" "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
+
+	$(INSTALL_DATA) "./data/$(BIN_D).service" "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
+
+	cd rog-anime/data && find "./anime" -type f -exec $(INSTALL_DATA) "{}" "$(DESTDIR_REALPATH)$(datarootdir)/asusd/{}" \;
+
+install-data-asusd_user:
+	$(INSTALL_DATA) "./data/$(BIN_U).service" "$(DESTDIR)$(libdir)/systemd/user/$(BIN_U).service"
+
+.PHONY: install-data-asusd install-data-asusd_user
+
+install-data: install-data-asusd install-data-asusd_user install-data-rog_gui
 
 install: install-program install-data
+	$(INSTALL_DATA) "./LICENSE" "$(DESTDIR)$(datarootdir)/asusctl/LICENSE"
 
 uninstall:
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_ROG)"
@@ -113,16 +158,12 @@ vendor:
 	mv .cargo/config ./cargo-config
 	rm -rf .cargo
 	rm -rf vendor
-	cargo vendor-filterer --platform x86_64-unknown-linux-gnu vendor
+	# Ensure cargo-vendor-filterer is installed (CI installs it already)
+	command -v cargo-vendor-filterer >/dev/null 2>&1 || cargo install --locked cargo-vendor-filterer
+	cargo vendor-filterer --all-features --platform x86_64-unknown-linux-gnu vendor
 	tar pcfJ vendor_asusctl_$(VERSION).tar.xz vendor
 	rm -rf vendor
 
-bindings:
-	typeshare ./rog-anime/src/ --lang=typescript --output-file=bindings/ts/anime.ts
-	typeshare ./rog-aura/src/ --lang=typescript --output-file=bindings/ts/aura.ts
-	typeshare ./rog-profiles/src/ --lang=typescript --output-file=bindings/ts/profiles.ts
-	typeshare ./rog-platform/src/ --lang=typescript --output-file=bindings/ts/platform.ts
-
 translate:
 	find -name \*.slint | xargs slint-tr-extractor -o rog-control-center/translations/en/rog-control-center.po
 
@@ -133,7 +174,7 @@ ifeq ($(VENDORED),1)
 	tar pxf vendor_asusctl_$(VERSION).tar.xz
 endif
 	cargo build $(ARGS)
-ifneq ($(STRIP_BINARIES),0)
+ifeq ($(STRIP_BINARIES),1)
 	strip -s ./target/$(TARGET)/$(BIN_C)
 	strip -s ./target/$(TARGET)/$(BIN_D)
 	strip -s ./target/$(TARGET)/$(BIN_U)

README.md

@@ -1,6 +1,6 @@
 # `asusctl` for ASUS ROG
 
-[Become a Patron!](https://www.patreon.com/bePatron?u=7602281) - [Asus Linux Website](https://asus-linux.org/)
+[![Become a Patron!](https://github.com/codebard/patron-button-and-widgets-by-codebard/blob/master/images/become_a_patron_button.png?raw=true)](https://www.patreon.com/bePatron?u=7602281) [![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/V7V5CLU67) - [Asus Linux Website](https://asus-linux.org/)
 
 **WARNING:** Many features are developed in tandem with kernel patches. If you see a feature is missing you either need a patched kernel or latest release.
 
@@ -11,9 +11,13 @@ Now includes a GUI, `rog-control-center`.
 
 ## Kernel support
 
-**The minimum supported kernel version is 6.10**, which will contain the patches from [here](https://lore.kernel.org/platform-driver-x86/20240404001652.86207-1-luke@ljones.dev/). This is especially required for 2023+ devices and possibly some lat 2022 devices.
+Due to on-going driver work the minimum suggested kernel version is always **the latest*, as improvements and fixes are continuous.
 
-Z13 devices will need [these](https://lore.kernel.org/linux-input/20240416090402.31057-1-luke@ljones.dev/T/#t)
+Support for TDP is tied to the new asus-armoury driver: available mainline since linux 6.19: everything older is not supported.
+
+## X11 support
+
+X11 is not supported at all, as in I will not help you with X11 issues if there are any due to limited time and it being unmaintained itself. You can however build `rog-control-center` with it enabled `cargo build --features "rog-control-center/x11"`.
 
 ## Goals
 
@@ -33,20 +37,20 @@ See the [rog-aura readme](./rog-aura/README.md) for more details.
 
 ## Discord
 
-[![Discord](https://img.shields.io/badge/Discord-7289DA?style=for-the-badge&logo=discord&logoColor=white)](https://discord.gg/z8y99XqPb7)
+[![Discord](https://img.shields.io/badge/Discord-7289DA?style=for-the-badge&logo=discord&logoColor=white)](https://discord.gg/B8GftRW2Hd)
 
 ## SUPPORTED LAPTOPS
 
 Most ASUS gaming laptops that have a USB keyboard. If `lsusb` shows something similar
 to this:
 
-```
+```plain
 Bus 001 Device 002: ID 0b05:1866 ASUSTek Computer, Inc. N-KEY Device
 ```
 
 or
 
-```
+```plain
 Bus 003 Device 002: ID 0b05:19b6 ASUSTek Computer, Inc. [unknown]
 ```
 
@@ -68,34 +72,56 @@ The list is a bit outdated as many features have been enabled in the Linux kerne
 - [x] Toggle bios setting for boot/POST sound
 - [x] Toggle GPU MUX (g-sync, or called MUX on 2022+ laptops)
 
-# GUI
+## GUI
 
 A gui is now in the repo - ROG Control Center. At this time it is still a WIP, but it has almost all features in place already.
 
 **NOTE**: Xorg is not supported.
 
-# BUILDING
+## BUILDING
 
-Rust and cargo are required, they can be installed from [rustup.rs](https://rustup.rs/) or from the distro repos if newer than 1.75.
+Rust and cargo are required, they can be installed from [rustup.rs](https://rustup.rs/).
+
+Distro packaging should work with the stable toolchain. If your distro does not provide a recent Rust toolchain, install rustup and use the stable toolchain.
 
 **fedora:**
 
-    dnf install cmake clang-devel libinput-devel libseat-devel libgbm-devel libxkbcommon-devel systemd-devel libdrm-devel expat-devel pcre2-devel libzstd-devel gtk3-devel
-    make
-    sudo make install
+```sh
+dnf install cmake clang-devel  libxkbcommon-devel systemd-devel expat-devel pcre2-devel libzstd-devel gtk3-devel
+make
+sudo make install
+```
 
 **openSUSE:**
 
 Works with KDE Plasma (without GTK packages)
 
-    zypper in -t pattern devel_basis
-    zypper in rustup make cmake clang-devel libinput-devel libseat-devel libgbm-devel libxkbcommon-devel systemd-devel libdrm-devel expat-devel pcre2-devel libzstd-devel gtk3-devel
-    make
-    sudo make install
+```sh
+zypper in -t pattern devel_basis
+zypper in rustup make cmake clang-devel libxkbcommon-devel systemd-devel expat-devel pcre2-devel libzstd-devel gtk3-devel
+make
+sudo make install
+```
+
+**Debian(unsuported):**
+
+officially unsuported,but you can still try and test it by yourself(some features may not be available).
+
+```sh
+sudo apt install libclang-dev libudev-dev libfontconfig-dev build-essential cmake libxkbcommon-dev
+curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
+make
+sudo make install
+```
 
 **Ubuntu, Popos (unsuported):**
 
-instructions removed as outdated
+```sh
+sudo apt install make cargo gcc pkg-config openssl libasound2-dev cmake build-essential python3 libfreetype6-dev libexpat1-dev libxcb-composite0-dev libssl-dev libx11-dev libfontconfig1-dev curl libclang-dev libudev-dev checkinstall libseat-dev libinput-dev libxkbcommon-dev libgbm-dev
+
+make
+sudo make install
+```
 
 ## Installing
 
@@ -113,15 +139,15 @@ You may also need to activate the service for debian install. If running Pop!\_O
 
 If you are upgrading from a previous installed version, you will need to restart the service or reboot.
 
-```
-$ systemctl daemon-reload && systemctl restart asusd
+```sh
+systemctl daemon-reload && systemctl restart asusd
 ```
 
 ## Uninstalling
 
 Run `sudo make uninstall` in the source repo, and remove `/etc/asusd/`.
 
-# Contributing
+## Contributing
 
 See `CONTRIBUTING.md`. Additionally, also do `cargo clean` and `cargo test` on first checkout to ensure the commit hooks are used (via `cargo-husky`).
 
@@ -129,17 +155,17 @@ Generation of the bindings with `make bindings` requires `typeshare` to be insta
 
 Dbus introsepction XML requires with `make introspection` requires `anime_sim` to be running before starting `asusd`.
 
-# OTHER
+## OTHER
 
-## AniMe Matrix simulator
+### AniMe Matrix simulator
 
 A simulator using SDL2 can be built using `cargo build --package rog_simulators` and run with `./target/debug/anime_sim`. Once started `asusd` will need restarting to pick it up. If running this sim on a laptop _with_ the display, the simulated display will be used instead of the physical display.
 
-## Supporting more laptops
+### Supporting more laptops
 
 Please file a support request.
 
-# License & Trademarks
+## License & Trademarks
 
 Mozilla Public License 2 (MPL-2.0)
 
@@ -152,3 +178,7 @@ Reference to any ASUS products, services, processes, or other information and/or
 The use of ROG and ASUS trademarks within this website and associated tools and libraries is only to provide a recognisable identifier to users to enable them to associate that these tools will work with ASUS ROG laptops.
 
 ---
+
+## AI Disaclaimer
+
+Portions of this code have been written by various AI tools and reviewed by the maintainer exaclty as with every other contribution.

asusctl/Cargo.toml

@@ -10,19 +10,33 @@ edition.workspace = true
 
 [dependencies]
 rog_anime = { path = "../rog-anime" }
+rog_scsi = { path = "../rog-scsi" }
 rog_slash = { path = "../rog-slash" }
 rog_aura = { path = "../rog-aura" }
 rog_dbus = { path = "../rog-dbus" }
 rog_profiles = { path = "../rog-profiles" }
 rog_platform = { path = "../rog-platform" }
-asusd = { path = "../asusd" }
 dmi_id = { path = "../dmi-id" }
 
+log.workspace = true
+env_logger.workspace = true
+
 ron.workspace = true
 gumdrop.workspace = true
 zbus.workspace = true
+argh = "0.1"
 
 [dev-dependencies]
 rog_dbus = { path = "../rog-dbus" }
 
-cargo-husky.workspace = true
+[package.metadata.deb]
+license-file = ["../LICENSE", "4"]
+extended-description = """\
+An utility for Linux to control many aspects of various ASUS laptops
+but can also be used with non-asus laptops with reduced features."""
+depends = "$auto"
+section = "utility"
+priority = "optional"
+assets = [
+  ["target/release/asusctl", "usr/bin/", "755"],
+]

asusctl/examples/anime-diag-png.rs

@@ -26,7 +26,7 @@ fn main() -> Result<(), Box<dyn Error>> {
         AnimeType::GA401,
     )?;
 
-    let anime_type = get_anime_type()?;
+    let anime_type = get_anime_type();
 
     proxy.write(matrix.into_data_buffer(anime_type)?).unwrap();
 

asusctl/examples/anime-diag.rs

@@ -29,7 +29,7 @@ fn main() {
             }
         }
 
-        let anime_type = get_anime_type().unwrap();
+        let anime_type = get_anime_type();
         proxy
             .write(matrix.into_data_buffer(anime_type).unwrap())
             .unwrap();

asusctl/examples/anime-gif.rs

@@ -19,7 +19,7 @@ fn main() {
 
     let path = Path::new(&args[1]);
     let brightness = args[2].parse::<f32>().unwrap();
-    let anime_type = get_anime_type().unwrap();
+    let anime_type = get_anime_type();
     let mut seq = Sequences::new(anime_type);
     seq.insert(
         0,

asusctl/examples/anime-grid.rs

@@ -14,7 +14,7 @@ fn main() {
     let conn = Connection::system().unwrap();
     let proxy = AnimeProxyBlocking::new(&conn).unwrap();
 
-    let anime_type = get_anime_type().unwrap();
+    let anime_type = get_anime_type();
     let mut matrix = AnimeGrid::new(anime_type);
     let tmp = matrix.get_mut();
 

asusctl/examples/anime-outline.rs

@@ -9,7 +9,7 @@ use zbus::blocking::Connection;
 fn main() {
     let conn = Connection::system().unwrap();
     let proxy = AnimeProxyBlocking::new(&conn).unwrap();
-    let anime_type = get_anime_type().unwrap();
+    let anime_type = get_anime_type();
     let mut matrix = AnimeDataBuffer::new(anime_type);
     matrix.data_mut()[1] = 100; // start = 1
     for n in matrix.data_mut()[2..32].iter_mut() {

asusctl/examples/anime-png.rs

@@ -20,7 +20,7 @@ fn main() -> Result<(), Box<dyn Error>> {
         exit(-1);
     }
 
-    let anime_type = get_anime_type()?;
+    let anime_type = get_anime_type();
     let matrix = AnimeImage::from_png(
         Path::new(&args[1]),
         args[2].parse::<f32>().unwrap(),

asusctl/examples/anime-spinning.rs

@@ -23,7 +23,7 @@ fn main() -> Result<(), Box<dyn Error>> {
         exit(-1);
     }
 
-    let anime_type = get_anime_type()?;
+    let anime_type = get_anime_type();
     let mut matrix = AnimeImage::from_png(
         Path::new(&args[1]),
         args[2].parse::<f32>().unwrap(),

asusctl/src/anime_cli.rs

@@ -1,154 +1,151 @@
-use gumdrop::Options;
-use rog_anime::usb::{AnimAwake, AnimBooting, AnimShutdown, AnimSleeping, Brightness};
+use argh::FromArgs;
+use rog_anime::usb::{AnimAwake, AnimBooting, AnimShutdown, AnimSleeping};
 use rog_anime::AnimeType;
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "anime", description = "anime commands")]
 pub struct AnimeCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(meta = "", help = "override the display type")]
+    #[argh(option, description = "override the display type")]
     pub override_type: Option<AnimeType>,
-    #[options(meta = "", help = "enable/disable the display")]
+    #[argh(option, description = "enable/disable the display")]
     pub enable_display: Option<bool>,
-    #[options(meta = "", help = "enable/disable the builtin run/powersave animation")]
-    pub enable_powersave_anim: Option<bool>,
-    #[options(
-        meta = "",
-        help = "set global base brightness value <Off, Low, Med, High>"
+    #[argh(
+        option,
+        description = "enable/disable the builtin run/powersave animation"
     )]
-    pub brightness: Option<Brightness>,
-    #[options(help = "clear the display")]
+    pub enable_powersave_anim: Option<bool>,
+    #[argh(
+        option,
+        description = "set global base brightness value <off, low, med, high>"
+    )]
+    pub brightness: Option<rog_anime::usb::Brightness>,
+    #[argh(switch, description = "clear the display")]
     pub clear: bool,
-    #[options(
-        no_short,
-        meta = "",
-        help = "turn the anime off when external power is unplugged"
+    #[argh(
+        option,
+        description = "turn the anime off when external power is unplugged"
     )]
     pub off_when_unplugged: Option<bool>,
-    #[options(
-        no_short,
-        meta = "",
-        help = "turn the anime off when the laptop suspends"
-    )]
+    #[argh(option, description = "turn the anime off when the laptop suspends")]
     pub off_when_suspended: Option<bool>,
-    #[options(
-        no_short,
-        meta = "",
-        help = "turn the anime off when the lid is closed"
-    )]
+    #[argh(option, description = "turn the anime off when the lid is closed")]
     pub off_when_lid_closed: Option<bool>,
-    #[options(no_short, meta = "", help = "Off with his head!!!")]
+    #[argh(option, description = "off with his head!!!")]
     pub off_with_his_head: Option<bool>,
-    #[options(command)]
+    #[argh(subcommand)]
     pub command: Option<AnimeActions>,
 }
 
-#[derive(Options)]
+/// Anime subcommands (image, gif, builtins, etc.)
+#[derive(FromArgs, Debug)]
+#[argh(subcommand)]
 pub enum AnimeActions {
-    #[options(help = "display a PNG image")]
     Image(AnimeImage),
-    #[options(help = "display a diagonal/pixel-perfect PNG")]
     PixelImage(AnimeImageDiagonal),
-    #[options(help = "display an animated GIF")]
     Gif(AnimeGif),
-    #[options(help = "display an animated diagonal/pixel-perfect GIF")]
     PixelGif(AnimeGifDiagonal),
-    #[options(help = "change which builtin animations are shown")]
     SetBuiltins(Builtins),
 }
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(
+    subcommand,
+    name = "set-builtins",
+    description = "change which builtin animations are shown"
+)]
 pub struct Builtins {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(
-        meta = "",
-        help = "Default is used if unspecified, <default:GlitchConstruction, StaticEmergence>"
+    #[argh(
+        option,
+        description = "default is used if unspecified, <default:GlitchConstruction, StaticEmergence>"
     )]
     pub boot: AnimBooting,
-    #[options(
-        meta = "",
-        help = "Default is used if unspecified, <default:BinaryBannerScroll, RogLogoGlitch>"
+    #[argh(
+        option,
+        description = "default is used if unspecified, <default:BinaryBannerScroll, RogLogoGlitch>"
     )]
     pub awake: AnimAwake,
-    #[options(
-        meta = "",
-        help = "Default is used if unspecified, <default:BannerSwipe, Starfield>"
+    #[argh(
+        option,
+        description = "default is used if unspecified, <default:BannerSwipe, Starfield>"
     )]
     pub sleep: AnimSleeping,
-    #[options(
-        meta = "",
-        help = "Default is used if unspecified, <default:GlitchOut, SeeYa>"
+    #[argh(
+        option,
+        description = "default is used if unspecified, <default:GlitchOut, SeeYa>"
     )]
     pub shutdown: AnimShutdown,
-    #[options(meta = "", help = "set/apply the animations <true/false>")]
+    #[argh(option, description = "set/apply the animations <true/false>")]
     pub set: Option<bool>,
 }
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "image", description = "display a PNG image")]
 pub struct AnimeImage {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(meta = "", help = "full path to the png to display")]
+    #[argh(option, description = "full path to the png to display")]
     pub path: String,
-    #[options(meta = "", default = "1.0", help = "scale 1.0 == normal")]
+    #[argh(option, default = "1.0", description = "scale 1.0 == normal")]
     pub scale: f32,
-    #[options(meta = "", default = "0.0", help = "x position (float)")]
+    #[argh(option, default = "0.0", description = "x position (float)")]
     pub x_pos: f32,
-    #[options(meta = "", default = "0.0", help = "y position (float)")]
+    #[argh(option, default = "0.0", description = "y position (float)")]
     pub y_pos: f32,
-    #[options(meta = "", default = "0.0", help = "the angle in radians")]
+    #[argh(option, default = "0.0", description = "the angle in radians")]
     pub angle: f32,
-    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    #[argh(option, default = "1.0", description = "brightness 0.0-1.0")]
     pub bright: f32,
 }
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(
+    subcommand,
+    name = "pixel-image",
+    description = "display a diagonal/pixel-perfect PNG"
+)]
 pub struct AnimeImageDiagonal {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(meta = "", help = "full path to the png to display")]
+    #[argh(option, description = "full path to the png to display")]
     pub path: String,
-    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    #[argh(option, default = "1.0", description = "brightness 0.0-1.0")]
     pub bright: f32,
 }
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "gif", description = "display an animated GIF")]
 pub struct AnimeGif {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(meta = "", help = "full path to the png to display")]
+    #[argh(option, description = "full path to the gif to display")]
     pub path: String,
-    #[options(meta = "", default = "1.0", help = "scale 1.0 == normal")]
+    #[argh(option, default = "1.0", description = "scale 1.0 == normal")]
     pub scale: f32,
-    #[options(meta = "", default = "0.0", help = "x position (float)")]
+    #[argh(option, default = "0.0", description = "x position (float)")]
     pub x_pos: f32,
-    #[options(meta = "", default = "0.0", help = "y position (float)")]
+    #[argh(option, default = "0.0", description = "y position (float)")]
     pub y_pos: f32,
-    #[options(meta = "", default = "0.0", help = "the angle in radians")]
+    #[argh(option, default = "0.0", description = "the angle in radians")]
     pub angle: f32,
-    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    #[argh(option, default = "1.0", description = "brightness 0.0-1.0")]
     pub bright: f32,
-    #[options(
-        meta = "",
+    #[argh(
+        option,
         default = "1",
-        help = "how many loops to play - 0 is infinite"
+        description = "how many loops to play - 0 is infinite"
     )]
     pub loops: u32,
 }
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(
+    subcommand,
+    name = "pixel-gif",
+    description = "display an animated diagonal/pixel-perfect GIF"
+)]
 pub struct AnimeGifDiagonal {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(meta = "", help = "full path to the png to display")]
+    #[argh(option, description = "full path to the gif to display")]
     pub path: String,
-    #[options(meta = "", default = "1.0", help = "brightness 0.0-1.0")]
+    #[argh(option, default = "1.0", description = "brightness 0.0-1.0")]
     pub bright: f32,
-    #[options(
-        meta = "",
+    #[argh(
+        option,
         default = "1",
-        help = "how many loops to play - 0 is infinite"
+        description = "how many loops to play - 0 is infinite"
     )]
     pub loops: u32,
 }

asusctl/src/aura_cli.rs

@@ -1,66 +1,67 @@
+use std::fmt;
 use std::str::FromStr;
 
-use gumdrop::Options;
+use argh::FromArgs;
 use rog_aura::error::Error;
 use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Colour, Direction, Speed};
 
-#[derive(Options, Debug)]
+#[derive(FromArgs, Debug, Clone)]
+#[argh(
+    subcommand,
+    name = "aura-power-old",
+    description = "aura power (old ROGs and TUF laptops)"
+)]
 pub struct LedPowerCommand1 {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(meta = "", help = "Control if LEDs enabled while awake <true/false>")]
+    #[argh(
+        option,
+        description = "control if LEDs enabled while awake <true/false>"
+    )]
     pub awake: Option<bool>,
-    #[options(help = "Use with awake option, if excluded defaults to false")]
+
+    #[argh(
+        switch,
+        description = "use with awake option; if excluded defaults to false"
+    )]
     pub keyboard: bool,
-    #[options(help = "Use with awake option, if excluded defaults to false")]
+
+    #[argh(
+        switch,
+        description = "use with awake option; if excluded defaults to false"
+    )]
     pub lightbar: bool,
-    #[options(meta = "", help = "Control boot animations <true/false>")]
+
+    #[argh(option, description = "control boot animations <true/false>")]
     pub boot: Option<bool>,
-    #[options(meta = "", help = "Control suspend animations <true/false>")]
+
+    #[argh(option, description = "control suspend animations <true/false>")]
     pub sleep: Option<bool>,
 }
 
-#[derive(Options, Debug)]
+#[derive(FromArgs, Debug, Clone)]
+#[argh(subcommand, name = "aura-power", description = "aura power")]
 pub struct LedPowerCommand2 {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(command)]
+    #[argh(subcommand)]
     pub command: Option<SetAuraZoneEnabled>,
 }
 
-#[derive(Options, Debug)]
+/// Subcommands to enable/disable specific aura zones
+#[derive(FromArgs, Debug, Clone)]
+#[argh(subcommand)]
 pub enum SetAuraZoneEnabled {
-    /// Applies to both old and new models
-    #[options(help = "")]
-    Keyboard(AuraPowerStates),
-    #[options(help = "")]
-    Logo(AuraPowerStates),
-    #[options(help = "")]
-    Lightbar(AuraPowerStates),
-    #[options(help = "")]
-    Lid(AuraPowerStates),
-    #[options(help = "")]
-    RearGlow(AuraPowerStates),
+    Keyboard(KeyboardPower),
+    Logo(LogoPower),
+    Lightbar(LightbarPower),
+    Lid(LidPower),
+    RearGlow(RearGlowPower),
+    Ally(AllyPower),
 }
 
-#[derive(Debug, Clone, Options)]
-pub struct AuraPowerStates {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(help = "defaults to false if option unused")]
-    pub boot: bool,
-    #[options(help = "defaults to false if option unused")]
-    pub awake: bool,
-    #[options(help = "defaults to false if option unused")]
-    pub sleep: bool,
-    #[options(help = "defaults to false if option unused")]
-    pub shutdown: bool,
-}
-
-#[derive(Options)]
+/// Keyboard brightness argument helper
+#[derive(Debug, Clone)]
 pub struct LedBrightness {
     level: Option<u8>,
 }
+
 impl LedBrightness {
     pub fn new(level: Option<u8>) -> Self {
         LedBrightness { level }
@@ -70,174 +71,302 @@ impl LedBrightness {
         self.level
     }
 }
+
 impl FromStr for LedBrightness {
     type Err = Error;
 
     fn from_str(s: &str) -> Result<Self, Self::Err> {
         let s = s.to_lowercase();
         match s.as_str() {
-            "off" => Ok(LedBrightness { level: Some(0x00) }),
-            "low" => Ok(LedBrightness { level: Some(0x01) }),
-            "med" => Ok(LedBrightness { level: Some(0x02) }),
-            "high" => Ok(LedBrightness { level: Some(0x03) }),
-            _ => {
-                print!("Invalid argument, must be one of: off, low, med, high");
-                Err(Error::ParseBrightness)
-            }
+            "off" => Ok(Self::new(Some(0x00))),
+            "low" => Ok(Self::new(Some(0x01))),
+            "med" => Ok(Self::new(Some(0x02))),
+            "high" => Ok(Self::new(Some(0x03))),
+            _ => Err(Error::ParseBrightness),
         }
     }
 }
-#[allow(clippy::to_string_trait_impl)]
-impl ToString for LedBrightness {
-    fn to_string(&self) -> String {
+
+impl fmt::Display for LedBrightness {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         let s = match self.level {
-            Some(0x00) => "low",
-            Some(0x01) => "med",
-            Some(0x02) => "high",
+            Some(0x00) => "off",
+            Some(0x01) => "low",
+            Some(0x02) => "med",
+            Some(0x03) => "high",
             _ => "unknown",
         };
-        s.to_owned()
+        write!(f, "{}", s)
     }
 }
 
-#[derive(Debug, Clone, Options, Default)]
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "keyboard",
+    description = "set power states for keyboard zone"
+)]
+pub struct KeyboardPower {
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub boot: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub awake: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub sleep: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub shutdown: bool,
+}
+
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "logo",
+    description = "set power states for logo zone"
+)]
+pub struct LogoPower {
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub boot: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub awake: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub sleep: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub shutdown: bool,
+}
+
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "lightbar",
+    description = "set power states for lightbar zone"
+)]
+pub struct LightbarPower {
+    #[argh(switch, description = "enable power while device is booting")]
+    pub boot: bool,
+    #[argh(switch, description = "enable power while device is awake")]
+    pub awake: bool,
+    #[argh(switch, description = "enable power while device is sleeping")]
+    pub sleep: bool,
+    #[argh(
+        switch,
+        description = "enable power while device is shutting down or hibernating"
+    )]
+    pub shutdown: bool,
+}
+
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "lid",
+    description = "set power states for lid zone"
+)]
+pub struct LidPower {
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub boot: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub awake: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub sleep: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub shutdown: bool,
+}
+
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "rear-glow",
+    description = "set power states for rear glow zone"
+)]
+pub struct RearGlowPower {
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub boot: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub awake: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub sleep: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub shutdown: bool,
+}
+
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "ally",
+    description = "set power states for ally zone"
+)]
+pub struct AllyPower {
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub boot: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub awake: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub sleep: bool,
+    #[argh(switch, description = "defaults to false if option unused")]
+    pub shutdown: bool,
+}
+
+/// Single speed-based effect
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "rainbow-cycle",
+    description = "single speed-based effect"
+)]
 pub struct SingleSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "WORD", help = "set the speed: low, med, high")]
+    #[argh(option, description = "set the speed: low, med, high")]
     pub speed: Speed,
-    #[options(
-        no_long,
-        meta = "",
-        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
     )]
     pub zone: AuraZone,
 }
 
-#[derive(Debug, Clone, Options, Default)]
+/// Single speed effect with direction
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "rainbow-wave",
+    description = "single speed effect with direction"
+)]
 pub struct SingleSpeedDirection {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "", help = "set the direction: up, down, left, right")]
+    #[argh(option, description = "set the direction: up, down, left, right")]
     pub direction: Direction,
-    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+
+    #[argh(option, description = "set the speed: low, med, high")]
     pub speed: Speed,
-    #[options(
-        no_long,
-        meta = "",
-        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
     )]
     pub zone: AuraZone,
 }
 
-#[derive(Debug, Clone, Default, Options)]
+/// Static single-colour effect
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "static",
+    description = "static single-colour effect"
+)]
 pub struct SingleColour {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "", help = "set the RGB value e.g, ff00ff")]
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
     pub colour: Colour,
-    #[options(
-        no_long,
-        meta = "",
-        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
     )]
     pub zone: AuraZone,
 }
 
-#[derive(Debug, Clone, Default, Options)]
+/// Single-colour effect with speed
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "highlight",
+    description = "single-colour effect with speed"
+)]
 pub struct SingleColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "", help = "set the RGB value e.g, ff00ff")]
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
     pub colour: Colour,
-    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+
+    #[argh(option, description = "set the speed: low, med, high")]
     pub speed: Speed,
-    #[options(
-        no_long,
-        meta = "",
-        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
     )]
     pub zone: AuraZone,
 }
 
-#[derive(Debug, Clone, Options, Default)]
+/// Two-colour breathing effect
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "breathe",
+    description = "two-colour breathing effect"
+)]
 pub struct TwoColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "", help = "set the first RGB value e.g, ff00ff")]
+    #[argh(option, description = "set the first RGB value e.g. ff00ff")]
     pub colour: Colour,
-    #[options(no_long, meta = "", help = "set the second RGB value e.g, ff00ff")]
+
+    #[argh(option, description = "set the second RGB value e.g. ff00ff")]
     pub colour2: Colour,
-    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+
+    #[argh(option, description = "set the speed: low, med, high")]
     pub speed: Speed,
-    #[options(
-        no_long,
-        meta = "",
-        help = "set the zone for this effect e.g, 0, 1, one, logo, lightbar-left"
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
     )]
     pub zone: AuraZone,
 }
 
-#[derive(Debug, Clone, Default, Options)]
+/// Multi-zone colour settings
+#[derive(FromArgs, Debug, Clone, Default)]
+#[allow(dead_code)]
+#[argh(description = "multi-zone colour settings")]
 pub struct MultiZone {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(short = "a", meta = "", help = "set the RGB value e.g, ff00ff")]
+    #[argh(option, short = 'a', description = "set the RGB value e.g. ff00ff")]
     pub colour1: Colour,
-    #[options(short = "b", meta = "", help = "set the RGB value e.g, ff00ff")]
+
+    #[argh(option, short = 'b', description = "set the RGB value e.g. ff00ff")]
     pub colour2: Colour,
-    #[options(short = "c", meta = "", help = "set the RGB value e.g, ff00ff")]
+
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
     pub colour3: Colour,
-    #[options(short = "d", meta = "", help = "set the RGB value e.g, ff00ff")]
+
+    #[argh(option, short = 'd', description = "set the RGB value e.g. ff00ff")]
     pub colour4: Colour,
 }
 
-#[derive(Debug, Clone, Default, Options)]
+/// Multi-colour with speed
+#[derive(FromArgs, Debug, Clone, Default)]
+#[allow(dead_code)]
+#[argh(description = "multi-colour with speed")]
 pub struct MultiColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(short = "a", meta = "", help = "set the RGB value e.g, ff00ff")]
+    #[argh(option, short = 'a', description = "set the RGB value e.g. ff00ff")]
     pub colour1: Colour,
-    #[options(short = "b", meta = "", help = "set the RGB value e.g, ff00ff")]
+
+    #[argh(option, short = 'b', description = "set the RGB value e.g. ff00ff")]
     pub colour2: Colour,
-    #[options(short = "c", meta = "", help = "set the RGB value e.g, ff00ff")]
+
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
     pub colour3: Colour,
-    #[options(short = "d", meta = "", help = "set the RGB value e.g, ff00ff")]
+
+    #[argh(option, short = 'd', description = "set the RGB value e.g. ff00ff")]
     pub colour4: Colour,
-    #[options(no_long, meta = "", help = "set the speed: low, med, high")]
+
+    #[argh(option, description = "set the speed: low, med, high")]
     pub speed: Speed,
 }
 
-/// Byte value for setting the built-in mode.
-///
-/// Enum corresponds to the required integer value
-// NOTE: The option names here must match those in rog-aura crate
-#[derive(Options)]
+/// Builtin aura effects
+#[derive(FromArgs, Debug)]
+#[argh(subcommand)]
 pub enum SetAuraBuiltin {
-    #[options(help = "set a single static colour")]
-    Static(SingleColour), // 0
-    #[options(help = "pulse between one or two colours")]
-    Breathe(TwoColourSpeed), // 1
-    #[options(help = "strobe through all colours")]
-    Strobe(SingleSpeed), // 2
-    #[options(help = "rainbow cycling in one of four directions")]
-    Rainbow(SingleSpeedDirection), // 3
-    #[options(help = "rain pattern mimicking raindrops")]
-    Stars(TwoColourSpeed), // 4
-    #[options(help = "rain pattern of three preset colours")]
-    Rain(SingleSpeed), // 5
-    #[options(help = "pressed keys are highlighted to fade")]
-    Highlight(SingleColourSpeed), // 6
-    #[options(help = "pressed keys generate horizontal laser")]
-    Laser(SingleColourSpeed), // 7
-    #[options(help = "pressed keys ripple outwards like a splash")]
-    Ripple(SingleColourSpeed), // 8
-    #[options(help = "set a rapid pulse")]
-    Pulse(SingleColour), // 10
-    #[options(help = "set a vertical line zooming from left")]
-    Comet(SingleColour), // 11
-    #[options(help = "set a wide vertical line zooming from left")]
-    Flash(SingleColour), // 12
+    Static(SingleColour),              // 0
+    Breathe(TwoColourSpeed),           // 1
+    RainbowCycle(SingleSpeed),         // 2
+    RainbowWave(SingleSpeedDirection), // 3
+    Stars(TwoColourSpeed),             // 4
+    Rain(SingleSpeed),                 // 5
+    Highlight(SingleColourSpeed),      // 6
+    Laser(SingleColourSpeed),          // 7
+    Ripple(SingleColourSpeed),         // 8
+    Pulse(SingleColour),               // 10
+    Comet(SingleColour),               // 11
+    Flash(SingleColour),               // 12
 }
 
 impl Default for SetAuraBuiltin {
@@ -312,14 +441,14 @@ impl From<&SetAuraBuiltin> for AuraEffect {
                 data.mode = AuraModeNum::Breathe;
                 data
             }
-            SetAuraBuiltin::Strobe(x) => {
+            SetAuraBuiltin::RainbowCycle(x) => {
                 let mut data: AuraEffect = x.into();
-                data.mode = AuraModeNum::Strobe;
+                data.mode = AuraModeNum::RainbowCycle;
                 data
             }
-            SetAuraBuiltin::Rainbow(x) => {
+            SetAuraBuiltin::RainbowWave(x) => {
                 let mut data: AuraEffect = x.into();
-                data.mode = AuraModeNum::Rainbow;
+                data.mode = AuraModeNum::RainbowWave;
                 data
             }
             SetAuraBuiltin::Stars(x) => {

asusctl/src/cli_opts.rs

@@ -1,118 +1,314 @@
-use gumdrop::Options;
-use rog_platform::platform::ThrottlePolicy;
+use argh::FromArgs;
+use rog_platform::platform::PlatformProfile;
 
 use crate::anime_cli::AnimeCommand;
 use crate::aura_cli::{LedBrightness, LedPowerCommand1, LedPowerCommand2, SetAuraBuiltin};
 use crate::fan_curve_cli::FanCurveCommand;
+use crate::scsi_cli::ScsiCommand;
 use crate::slash_cli::SlashCommand;
 
-#[derive(Default, Options)]
+#[derive(FromArgs, Default, Debug)]
+/// asusctl command-line options
 pub struct CliStart {
-    #[options(help_flag, help = "print help message")]
-    pub help: bool,
-    #[options(help = "show program version number")]
-    pub version: bool,
-    #[options(help = "show supported functions of this laptop")]
-    pub show_supported: bool,
-    #[options(meta = "", help = "<off, low, med, high>")]
-    pub kbd_bright: Option<LedBrightness>,
-    #[options(help = "Toggle to next keyboard brightness")]
-    pub next_kbd_bright: bool,
-    #[options(help = "Toggle to previous keyboard brightness")]
-    pub prev_kbd_bright: bool,
-    #[options(meta = "", help = "Set your battery charge limit <20-100>")]
-    pub chg_limit: Option<u8>,
-    #[options(command)]
-    pub command: Option<CliCommand>,
+    #[argh(subcommand)]
+    pub command: CliCommand,
 }
 
-#[derive(Options)]
+/// Top-level subcommands for asusctl
+#[derive(FromArgs, Debug)]
+#[argh(subcommand)]
 pub enum CliCommand {
-    #[options(help = "Set the keyboard lighting from built-in modes")]
-    LedMode(LedModeCommand),
-    #[options(help = "Set the LED power states")]
-    LedPow1(LedPowerCommand1),
-    #[options(help = "Set the LED power states")]
-    LedPow2(LedPowerCommand2),
-    #[options(help = "Set or select platform_profile")]
+    Aura(LedModeCommand),
+    AuraPowerOld(LedPowerCommand1),
+    AuraPower(LedPowerCommand2),
+    Brightness(BrightnessCommand),
     Profile(ProfileCommand),
-    #[options(help = "Set, select, or modify fan curves if supported")]
     FanCurve(FanCurveCommand),
-    #[options(help = "Set the graphics mode (obsoleted by supergfxctl)")]
-    Graphics(GraphicsCommand),
-    #[options(name = "anime", help = "Manage AniMe Matrix")]
     Anime(AnimeCommand),
-    #[options(name = "slash", help = "Manage Slash Ledbar")]
     Slash(SlashCommand),
-    #[options(help = "Change bios settings")]
-    Bios(BiosCommand),
+    Scsi(ScsiCommand),
+    Armoury(ArmouryCommand),
+    Backlight(BacklightCommand),
+    Battery(BatteryCommand),
+    Info(InfoCommand),
 }
 
-#[derive(Debug, Clone, Options)]
+impl Default for CliCommand {
+    fn default() -> Self {
+        CliCommand::Info(InfoCommand::default())
+    }
+}
+
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "profile", description = "profile management")]
 pub struct ProfileCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
-
-    #[options(help = "toggle to next profile in list")]
-    pub next: bool,
-
-    #[options(help = "list available profiles")]
-    pub list: bool,
-
-    #[options(help = "get profile")]
-    pub profile_get: bool,
-
-    #[options(meta = "", help = "set the active profile")]
-    pub profile_set: Option<ThrottlePolicy>,
+    #[argh(subcommand)]
+    pub command: ProfileSubCommand,
 }
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(subcommand)]
+pub enum ProfileSubCommand {
+    Next(ProfileNextCommand),
+    List(ProfileListCommand),
+    Get(ProfileGetCommand),
+    Set(ProfileSetCommand),
+}
+
+impl Default for ProfileSubCommand {
+    fn default() -> Self {
+        ProfileSubCommand::List(ProfileListCommand::default())
+    }
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "next",
+    description = "toggle to next profile in list"
+)]
+pub struct ProfileNextCommand {}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(subcommand, name = "list", description = "list available profiles")]
+pub struct ProfileListCommand {}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(subcommand, name = "get", description = "get profile")]
+pub struct ProfileGetCommand {}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(subcommand, name = "set", description = "set profile")]
+pub struct ProfileSetCommand {
+    #[argh(positional, description = "profile to set")]
+    pub profile: PlatformProfile,
+
+    #[argh(
+        switch,
+        short = 'a',
+        description = "set the profile to use on AC power"
+    )]
+    pub ac: bool,
+
+    #[argh(
+        switch,
+        short = 'b',
+        description = "set the profile to use on battery power"
+    )]
+    pub battery: bool,
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(subcommand, name = "aura", description = "led mode commands")]
 pub struct LedModeCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(help = "switch to next aura mode")]
+    #[argh(switch, description = "switch to next aura mode")]
     pub next_mode: bool,
-    #[options(help = "switch to previous aura mode")]
+
+    #[argh(switch, description = "switch to previous aura mode")]
     pub prev_mode: bool,
-    #[options(command)]
+
+    #[argh(subcommand)]
     pub command: Option<SetAuraBuiltin>,
 }
 
-#[derive(Options)]
-pub struct GraphicsCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "armoury",
+    description = "armoury / firmware attributes"
+)]
+pub struct ArmouryCommand {
+    #[argh(subcommand)]
+    pub command: ArmourySubCommand,
 }
 
-#[derive(Options, Debug)]
-pub struct BiosCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(
-        meta = "",
-        short = "S",
-        no_long,
-        help = "set bios POST sound: asusctl -S <true/false>"
-    )]
-    pub post_sound_set: Option<bool>,
-    #[options(no_long, short = "s", help = "read bios POST sound")]
-    pub post_sound_get: bool,
-    #[options(
-        meta = "",
-        short = "D",
-        no_long,
-        help = "Switch GPU MUX mode: 0 = Discrete, 1 = Optimus, reboot required"
-    )]
-    pub gpu_mux_mode_set: Option<u8>,
-    #[options(no_long, short = "d", help = "get GPU mode")]
-    pub gpu_mux_mode_get: bool,
-    #[options(
-        meta = "",
-        short = "O",
-        no_long,
-        help = "Set device panel overdrive <true/false>"
-    )]
-    pub panel_overdrive_set: Option<bool>,
-    #[options(no_long, short = "o", help = "get panel overdrive")]
-    pub panel_overdrive_get: bool,
+#[derive(FromArgs, Debug)]
+#[argh(subcommand)]
+pub enum ArmourySubCommand {
+    Set(ArmouryPropertySetCommand),
+    Get(ArmouryPropertyGetCommand),
+    List(ArmouryPropertyListCommand),
 }
+
+impl Default for ArmourySubCommand {
+    fn default() -> Self {
+        ArmourySubCommand::List(ArmouryPropertyListCommand::default())
+    }
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "set",
+    description = "set an asus-armoury firmware-attribute"
+)]
+pub struct ArmouryPropertySetCommand {
+    #[argh(
+        positional,
+        description = "name of the attribute to set (see asus-armoury list for available properties)"
+    )]
+    pub property: String,
+
+    #[argh(positional, description = "value to set for the given attribute")]
+    pub value: i32,
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "list",
+    description = "list all firmware-attributes supported by asus-armoury"
+)]
+pub struct ArmouryPropertyListCommand {}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "get",
+    description = "get a firmware-attribute from asus-armoury"
+)]
+pub struct ArmouryPropertyGetCommand {
+    #[argh(
+        positional,
+        description = "name of the property to get (see asus-armoury list for available properties)"
+    )]
+    pub property: String,
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(subcommand, name = "backlight", description = "backlight options")]
+pub struct BacklightCommand {
+    #[argh(option, description = "set screen brightness <0-100>")]
+    pub screenpad_brightness: Option<i32>,
+
+    #[argh(
+        option,
+        description = "set screenpad gamma brightness 0.5 - 2.2, 1.0 == linear"
+    )]
+    pub screenpad_gamma: Option<f32>,
+
+    #[argh(
+        option,
+        description = "set screenpad brightness to sync with primary display"
+    )]
+    pub sync_screenpad_brightness: Option<bool>,
+}
+
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "battery", description = "battery options")]
+pub struct BatteryCommand {
+    #[argh(subcommand)]
+    pub command: BatterySubCommand,
+}
+
+#[derive(FromArgs, Debug)]
+#[argh(subcommand)]
+pub enum BatterySubCommand {
+    Limit(BatteryLimitCommand),
+    OneShot(BatteryOneShotCommand),
+    Info(BatteryInfoCommand),
+}
+
+impl Default for BatterySubCommand {
+    fn default() -> Self {
+        BatterySubCommand::OneShot(BatteryOneShotCommand::default())
+    }
+}
+
+#[derive(FromArgs, Debug)]
+#[argh(
+    subcommand,
+    name = "limit",
+    description = "set battery charge limit <20-100>"
+)]
+pub struct BatteryLimitCommand {
+    #[argh(positional, description = "charge limit percentage 20-100")]
+    pub limit: u8,
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "oneshot",
+    description = "one-shot full charge (optional percent)"
+)]
+pub struct BatteryOneShotCommand {
+    #[argh(positional, description = "optional target percent (defaults to 100)")]
+    pub percent: Option<u8>,
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "info",
+    description = "show current battery charge limit"
+)]
+pub struct BatteryInfoCommand {}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "info",
+    description = "show program version and system info"
+)]
+pub struct InfoCommand {
+    #[argh(switch, description = "show supported functions of this laptop")]
+    pub show_supported: bool,
+}
+
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "leds", description = "keyboard brightness control")]
+pub struct BrightnessCommand {
+    #[argh(subcommand)]
+    pub command: BrightnessSubCommand,
+}
+
+#[derive(FromArgs, Debug)]
+#[argh(subcommand)]
+pub enum BrightnessSubCommand {
+    Set(BrightnessSetCommand),
+    Get(BrightnessGetCommand),
+    Next(BrightnessNextCommand),
+    Prev(BrightnessPrevCommand),
+}
+
+impl Default for BrightnessSubCommand {
+    fn default() -> Self {
+        BrightnessSubCommand::Get(BrightnessGetCommand::default())
+    }
+}
+
+#[derive(FromArgs, Debug)]
+#[argh(
+    subcommand,
+    name = "set",
+    description = "set keyboard brightness <off, low, med, high>"
+)]
+pub struct BrightnessSetCommand {
+    #[argh(positional, description = "brightness level: off, low, med, high")]
+    pub level: LedBrightness,
+}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "get",
+    description = "get current keyboard brightness"
+)]
+pub struct BrightnessGetCommand {}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "next",
+    description = "toggle to next keyboard brightness"
+)]
+pub struct BrightnessNextCommand {}
+
+#[derive(FromArgs, Debug, Default)]
+#[argh(
+    subcommand,
+    name = "prev",
+    description = "toggle to previous keyboard brightness"
+)]
+pub struct BrightnessPrevCommand {}

asusctl/src/fan_curve_cli.rs

@@ -1,49 +1,44 @@
-use gumdrop::Options;
-use rog_platform::platform::ThrottlePolicy;
+use argh::FromArgs;
+use rog_platform::platform::PlatformProfile;
 use rog_profiles::fan_curve_set::CurveData;
 use rog_profiles::FanCurvePU;
 
-#[derive(Debug, Clone, Options)]
+#[derive(FromArgs, Debug, Clone)]
+#[argh(subcommand, name = "fan-curve", description = "fan curve commands")]
 pub struct FanCurveCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
-
-    #[options(help = "get enabled fan profiles")]
+    #[argh(switch, description = "get enabled fan profiles")]
     pub get_enabled: bool,
 
-    #[options(help = "set the active profile's fan curve to default")]
+    #[argh(switch, description = "set the active profile's fan curve to default")]
     pub default: bool,
 
-    #[options(
-        meta = "",
-        help = "profile to modify fan-curve for. Shows data if no options provided"
+    #[argh(
+        option,
+        description = "profile to modify fan-curve for. shows data if no options provided"
     )]
-    pub mod_profile: Option<ThrottlePolicy>,
+    pub mod_profile: Option<PlatformProfile>,
 
-    #[options(
-        meta = "",
-        help = "enable or disable <true/false> fan all curves for a profile. `--mod_profile` \
-                required"
+    #[argh(
+        option,
+        description = "enable or disable <true/false> fan all curves for a profile; --mod_profile required"
     )]
     pub enable_fan_curves: Option<bool>,
 
-    #[options(
-        meta = "",
-        help = "enable or disable <true/false> a single fan curve for a profile. `--mod_profile` \
-                and `--fan` required"
+    #[argh(
+        option,
+        description = "enable or disable <true/false> a single fan curve for a profile; --mod_profile and --fan required"
     )]
     pub enable_fan_curve: Option<bool>,
 
-    #[options(
-        meta = "",
-        help = "select fan <cpu/gpu/mid> to modify. `--mod_profile` required"
+    #[argh(
+        option,
+        description = "select fan <cpu/gpu/mid> to modify; --mod_profile required"
     )]
     pub fan: Option<FanCurvePU>,
 
-    #[options(
-        meta = "",
-        help = "data format = 30c:1%,49c:2%,59c:3%,69c:4%,79c:31%,89c:49%,99c:56%,109c:58%. \
-                `--mod-profile` required. If '%' is omitted the fan range is 0-255"
+    #[argh(
+        option,
+        description = "data format = 30c:1%,49c:2%,...; --mod-profile required. If '%' is omitted the fan range is 0-255"
     )]
     pub data: Option<CurveData>,
 }

asusctl/src/scsi_cli.rs

@@ -0,0 +1,30 @@
+use argh::FromArgs;
+use rog_scsi::{AuraMode, Colour, Direction, Speed};
+
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "scsi", description = "scsi LED commands")]
+pub struct ScsiCommand {
+    #[argh(option, description = "enable the SCSI drive LEDs")]
+    pub enable: Option<bool>,
+
+    #[argh(option, description = "set LED mode (use 'list' for all options)")]
+    pub mode: Option<AuraMode>,
+
+    #[argh(
+        option,
+        description = "set LED mode speed <slowest, slow, med, fast, fastest>"
+    )]
+    pub speed: Option<Speed>,
+
+    #[argh(option, description = "set LED mode direction <forward, reverse>")]
+    pub direction: Option<Direction>,
+
+    #[argh(
+        option,
+        description = "set LED colours <hex>, specify up to 4 with repeated arg"
+    )]
+    pub colours: Vec<Colour>,
+
+    #[argh(switch, description = "list available animations")]
+    pub list: bool,
+}

asusctl/src/slash_cli.rs

@@ -1,20 +1,34 @@
-use gumdrop::Options;
+use argh::FromArgs;
 use rog_slash::SlashMode;
 
-#[derive(Options)]
+#[derive(FromArgs, Debug)]
+#[argh(subcommand, name = "slash", description = "slash ledbar commands")]
 pub struct SlashCommand {
-    #[options(help = "print help message")]
-    pub help: bool,
-    #[options(help = "Enable the Slash Ledbar")]
+    #[argh(switch, description = "enable the Slash Ledbar")]
     pub enable: bool,
-    #[options(help = "Ddisable the Slash Ledbar")]
+    #[argh(switch, description = "disable the Slash Ledbar")]
     pub disable: bool,
-    #[options(meta = "", help = "Set brightness value <0-255>")]
+    #[argh(option, short = 'l', description = "set brightness value <0-255>")]
     pub brightness: Option<u8>,
-    #[options(meta = "", help = "Set interval value <0-255>")]
+    #[argh(option, description = "set interval value <0-5>")]
     pub interval: Option<u8>,
-    #[options(help = "Set SlashMode (so 'list' for all options)")]
-    pub slash_mode: Option<SlashMode>,
-    #[options(help = "list available animations")]
+    #[argh(option, description = "set SlashMode (use 'list' for options)")]
+    pub mode: Option<SlashMode>,
+    #[argh(switch, description = "list available animations")]
     pub list: bool,
+
+    #[argh(option, short = 'B', description = "show the animation on boot")]
+    pub show_on_boot: Option<bool>,
+    #[argh(option, short = 'S', description = "show the animation on shutdown")]
+    pub show_on_shutdown: Option<bool>,
+    #[argh(option, short = 's', description = "show the animation on sleep")]
+    pub show_on_sleep: Option<bool>,
+    #[argh(option, short = 'b', description = "show the animation on battery")]
+    pub show_on_battery: Option<bool>,
+    #[argh(
+        option,
+        short = 'w',
+        description = "show the low-battery warning animation"
+    )]
+    pub show_battery_warning: Option<bool>,
 }

asusd-user/Cargo.toml

@@ -12,13 +12,16 @@ edition.workspace = true
 name = "asusd-user"
 path = "src/daemon.rs"
 
+[features]
+default = []
+local_data = []
+
 [dependencies]
 dirs.workspace = true
 smol.workspace = true
 
 # serialisation
 serde.workspace = true
-serde_derive.workspace = true
 ron.workspace = true
 
 rog_anime = { path = "../rog-anime" }
@@ -30,8 +33,15 @@ config-traits = { path = "../config-traits" }
 zbus.workspace = true
 env_logger.workspace = true
 
-[dev-dependencies]
-cargo-husky.workspace = true
-
-[package.metadata.cargo-machete]
-ignored = ["serde"]
+[package.metadata.deb]
+license-file = ["../LICENSE", "4"]
+extended-description = """\
+An user utility for Linux to control fancy things on various ASUS laptops
+like keyboard effects or anime matrix animation cycles."""
+depends = "$auto"
+section = "utility"
+priority = "optional"
+assets = [
+  ["target/release/asusd-user", "usr/bin/", "755"],
+  ["../asusd_user-fakeinstall/usr/lib/systemd/user/*", "usr/lib/systemd/user/", "644"],
+]

asusd-user/src/config.rs

@@ -6,7 +6,7 @@ use rog_anime::{ActionLoader, AnimTime, AnimeType, Fade, Sequences as AnimeSeque
 use rog_aura::effects::{AdvancedEffects as AuraSequences, Breathe, DoomFlicker, Effect, Static};
 use rog_aura::keyboard::LedCode;
 use rog_aura::{Colour, Speed};
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 
 use crate::error::Error;
 

asusd-user/src/ctrl_anime.rs

@@ -9,7 +9,7 @@ use rog_anime::error::AnimeError;
 use rog_anime::{ActionData, ActionLoader, AnimTime, Fade, Sequences, Vec2};
 use rog_dbus::zbus_anime::AnimeProxyBlocking;
 use ron::ser::PrettyConfig;
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 use zbus::interface;
 use zbus::zvariant::{ObjectPath, Type};
 
@@ -66,7 +66,7 @@ pub struct CtrlAnimeInner<'a> {
     do_early_return: Arc<AtomicBool>,
 }
 
-impl<'a> CtrlAnimeInner<'static> {
+impl CtrlAnimeInner<'static> {
     pub fn new(
         sequences: Sequences,
         client: AnimeProxyBlocking<'static>,
@@ -81,7 +81,7 @@ impl<'a> CtrlAnimeInner<'static> {
 
     /// To be called on each main loop iteration to pump out commands to the
     /// anime
-    pub fn run(&'a self) -> Result<(), Error> {
+    pub fn run(&self) -> Result<(), Error> {
         if self.do_early_return.load(Ordering::SeqCst) {
             return Ok(());
         }
@@ -151,10 +151,7 @@ impl CtrlAnime<'static> {
     pub async fn add_to_server(self, server: &mut zbus::Connection) {
         server
             .object_server()
-            .at(
-                &ObjectPath::from_str_unchecked("/org/asuslinux/Anime"),
-                self,
-            )
+            .at(&ObjectPath::from_str_unchecked("/xyz/ljones/Anime"), self)
             .await
             .map_err(|err| {
                 println!("CtrlAnime: add_to_server {}", err);
@@ -170,7 +167,7 @@ impl CtrlAnime<'static> {
 // - Do actions
 // - Write config if required
 // - Unset inner_early_return
-#[interface(name = "org.asuslinux.Daemon")]
+#[interface(name = "xyz.ljones.Asusd")]
 impl CtrlAnime<'static> {
     pub fn insert_asus_gif(
         &mut self,

asusd-user/src/daemon.rs

@@ -11,8 +11,7 @@ use rog_aura::aura_detection::LedSupportData;
 use rog_aura::keyboard::KeyLayout;
 use rog_dbus::zbus_anime::AnimeProxyBlocking;
 use rog_dbus::zbus_aura::AuraProxyBlocking;
-use rog_dbus::zbus_platform::PlatformProxyBlocking;
-use rog_dbus::DBUS_NAME;
+use rog_dbus::{list_iface_blocking, DBUS_NAME};
 use smol::Executor;
 use zbus::Connection;
 
@@ -36,20 +35,16 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
     println!("rog-platform v{}", rog_platform::VERSION);
 
     let conn = zbus::blocking::Connection::system().unwrap();
-    let platform_proxy = PlatformProxyBlocking::new(&conn).unwrap();
 
-    let supported = platform_proxy
-        .supported_interfaces()
-        .unwrap_or_default()
-        .contains(&"Anime".to_string());
+    let supported = list_iface_blocking()?;
     let config = ConfigBase::new().load();
     let executor = Executor::new();
 
     let early_return = Arc::new(AtomicBool::new(false));
     // Set up the anime data and run loop/thread
-    if supported {
+    if supported.contains(&"xyz.ljones.Anime".to_string()) {
         if let Some(cfg) = config.active_anime {
-            let anime_type = get_anime_type()?;
+            let anime_type = get_anime_type();
             let anime_config = ConfigAnime::new().set_name(cfg).load();
             let anime = anime_config.create(anime_type)?;
             let anime_config = Arc::new(Mutex::new(anime_config));

asusd-user/src/zbus_anime.rs

@@ -1,8 +1,8 @@
-//! # `DBus` interface proxy for: `org.asuslinux.Daemon`
+//! # `DBus` interface proxy for: `xyz.ljones.Asusd`
 //!
 //! This code was generated by `zbus-xmlgen` `1.0.0` from `DBus` introspection
-//! data. Source: `Interface '/org/asuslinux/Anime' from service
-//! 'org.asuslinux.Daemon' on session bus`.
+//! data. Source: `Interface '/xyz/ljones/Anime' from service
+//! 'xyz.ljones.Asusd' on session bus`.
 //!
 //! You may prefer to adapt it, instead of using it verbatim.
 //!
@@ -23,10 +23,7 @@
 
 use zbus::proxy;
 
-#[proxy(
-    interface = "org.asuslinux.Daemon",
-    default_path = "/org/asuslinux/Anime"
-)]
+#[proxy(interface = "xyz.ljones.Asusd", default_path = "/xyz/ljones/Anime")]
 trait Daemon {
     /// InsertAsusGif method
     fn insert_asus_gif(

asusd/Cargo.toml

@@ -18,6 +18,7 @@ config-traits = { path = "../config-traits" }
 rog_anime = { path = "../rog-anime", features = ["dbus"] }
 rog_slash = { path = "../rog-slash", features = ["dbus"] }
 rog_aura = { path = "../rog-aura", features = ["dbus"] }
+rog_scsi = { path = "../rog-scsi", features = ["dbus"] }
 rog_platform = { path = "../rog-platform" }
 rog_profiles = { path = "../rog-profiles" }
 dmi_id = { path = "../dmi-id" }
@@ -33,17 +34,29 @@ tokio.workspace = true
 log.workspace = true
 env_logger.workspace = true
 
+futures-util.workspace = true
 zbus.workspace = true
 logind-zbus.workspace = true
 
 # serialisation
 serde.workspace = true
-serde_derive.workspace = true
 
 concat-idents.workspace = true
 
 [dev-dependencies]
 cargo-husky.workspace = true
 
-[package.metadata.cargo-machete]
-ignored = ["serde"]
+[package.metadata.deb]
+license-file = ["../LICENSE", "4"]
+extended-description = """\
+The dbus server for asusctl and rog-control-center applications."""
+depends = "$auto"
+section = "utility"
+priority = "optional"
+assets = [
+  ["target/release/asusd", "usr/bin/", "755"],
+  ["../asusd-fakeinstall/usr/lib/systemd/system/*", "usr/lib/systemd/system/", "644"],
+  ["../asusd-fakeinstall/usr/lib/udev/rules.d/*", "usr/lib/udev/rules.d/", "644"],
+  ["../asusd-fakeinstall/usr/share/asusd/*", "usr/share/share/asusd/", "644"],
+  ["../asusd-fakeinstall/usr/share/dbus-1/system.d/*", "usr/share/dbus-1/system.d/", "644"],
+]

asusd/src/asus_armoury.rs

@@ -0,0 +1,544 @@
+use std::sync::Arc;
+
+use config_traits::StdConfig;
+use log::{debug, error, info, warn};
+use rog_platform::asus_armoury::{
+    AttrValue, Attribute, FirmwareAttribute, FirmwareAttributeType, FirmwareAttributes,
+};
+use rog_platform::platform::{PlatformProfile, RogPlatform};
+use rog_platform::power::AsusPower;
+use serde::{Deserialize, Serialize};
+use tokio::sync::Mutex;
+use zbus::object_server::SignalEmitter;
+use zbus::zvariant::{ObjectPath, OwnedObjectPath, OwnedValue, Type, Value};
+use zbus::{fdo, interface, Connection};
+
+use crate::config::Config;
+use crate::error::RogError;
+use crate::{Reloadable, ASUS_ZBUS_PATH};
+
+const MOD_NAME: &str = "asus_armoury";
+
+#[derive(Debug, Default, Clone, Deserialize, Serialize, Type, Value, OwnedValue)]
+pub struct PossibleValues {
+    strings: Vec<String>,
+    nums: Vec<i32>,
+}
+
+fn dbus_path_for_attr(attr_name: &str) -> OwnedObjectPath {
+    ObjectPath::from_str_unchecked(&format!("{ASUS_ZBUS_PATH}/{MOD_NAME}/{attr_name}")).into()
+}
+
+#[derive(Clone)]
+pub struct AsusArmouryAttribute {
+    attr: Attribute,
+    config: Arc<Mutex<Config>>,
+    /// platform control required here for access to PPD or Throttle profile
+    platform: RogPlatform,
+    power: AsusPower,
+}
+
+impl AsusArmouryAttribute {
+    pub fn new(
+        attr: Attribute,
+        platform: RogPlatform,
+        power: AsusPower,
+        config: Arc<Mutex<Config>>,
+    ) -> Self {
+        Self {
+            attr,
+            config,
+            platform,
+            power,
+        }
+    }
+
+    pub fn attribute_name(&self) -> String {
+        String::from(self.attr.name())
+    }
+
+    fn resolve_i32_value(refreshed: Option<i32>, cached: &AttrValue) -> i32 {
+        refreshed
+            .or(match cached {
+                AttrValue::Integer(i) => Some(*i),
+                _ => None,
+            })
+            .unwrap_or(-1)
+    }
+
+    pub async fn emit_limits(&self, connection: &Connection) -> Result<(), RogError> {
+        let path = dbus_path_for_attr(self.attr.name());
+        let signal = SignalEmitter::new(connection, path)?;
+        self.min_value_changed(&signal).await?;
+        self.max_value_changed(&signal).await?;
+        self.scalar_increment_changed(&signal).await?;
+        self.current_value_changed(&signal).await?;
+        Ok(())
+    }
+
+    pub async fn move_to_zbus(self, connection: &Connection) -> Result<(), RogError> {
+        let path = dbus_path_for_attr(self.attr.name());
+        connection
+            .object_server()
+            .at(path.clone(), self)
+            .await
+            .map_err(|e| error!("Couldn't add server at path: {path}, {e:?}"))
+            .ok();
+        Ok(())
+    }
+
+    async fn watch_and_notify(
+        &mut self,
+        signal_ctxt: SignalEmitter<'static>,
+    ) -> Result<(), RogError> {
+        use futures_util::StreamExt;
+
+        let name = self.name();
+        macro_rules! watch_value_notify {
+            ($attr_str:expr, $fn_prop_changed:ident) => {
+                match self.attr.get_watcher($attr_str) {
+                    Ok(watch) => {
+                        let name = <&str>::from(name);
+                        let ctrl = self.clone();
+                        let sig = signal_ctxt.clone();
+                        tokio::spawn(async move {
+                            let mut buffer = [0; 32];
+                            if let Ok(stream) = watch.into_event_stream(&mut buffer) {
+                                stream
+                                    .for_each(|_| async {
+                                        debug!("{} changed", name);
+                                        ctrl.$fn_prop_changed(&sig).await.ok();
+                                    })
+                                    .await;
+                            } else {
+                                info!(
+                                    "inotify event stream failed for {} ({}). You can ignore this \
+                                     if unsupported",
+                                    name, $attr_str
+                                );
+                            }
+                        });
+                    }
+                    Err(e) => info!(
+                        "inotify watch failed: {}. You can ignore this if your device does not \
+                         support the feature",
+                        e
+                    ),
+                }
+            };
+        }
+
+        // "current_value", "default_value", "min_value", "max_value"
+        watch_value_notify!("current_value", current_value_changed);
+        watch_value_notify!("default_value", default_value_changed);
+        watch_value_notify!("min_value", min_value_changed);
+        watch_value_notify!("max_value", max_value_changed);
+
+        Ok(())
+    }
+}
+
+#[derive(Clone, Default)]
+pub struct ArmouryAttributeRegistry {
+    attrs: Vec<AsusArmouryAttribute>,
+}
+
+impl ArmouryAttributeRegistry {
+    pub fn push(&mut self, attr: AsusArmouryAttribute) {
+        self.attrs.push(attr);
+    }
+
+    pub async fn emit_limits(&self, connection: &Connection) -> Result<(), RogError> {
+        let mut last_err: Option<RogError> = None;
+        for attr in &self.attrs {
+            if let Err(e) = attr.emit_limits(connection).await {
+                error!(
+                    "Failed to emit updated limits for attribute '{}': {e:?}",
+                    attr.attribute_name()
+                );
+                last_err = Some(e);
+            }
+        }
+        if let Some(err) = last_err {
+            Err(err)
+        } else {
+            Ok(())
+        }
+    }
+}
+
+impl crate::Reloadable for AsusArmouryAttribute {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        info!("Reloading {}", self.attr.name());
+        let attribute: FirmwareAttribute = self.attr.name().into();
+        let name = self.attr.name();
+
+        let config = self.config.lock().await;
+        let apply_value = match attribute.property_type() {
+            FirmwareAttributeType::Ppt => {
+                let profile: PlatformProfile = self.platform.get_platform_profile()?.into();
+                let power_plugged = self
+                    .power
+                    .get_online()
+                    .map_err(|e| {
+                        error!("Could not get power status: {e:?}");
+                        e
+                    })
+                    .unwrap_or_default()
+                    == 1;
+
+                let apply_value = {
+                    config.select_tunings_ref(power_plugged, profile).and_then(
+                        |tuning| match tuning.enabled {
+                            true => tuning.group.get(&self.name()).copied(),
+                            false => None,
+                        },
+                    )
+                };
+
+                apply_value.map_or(AttrValue::None, AttrValue::Integer)
+            }
+            FirmwareAttributeType::Gpu => {
+                info!("Reload called on GPU attribute {name}: doing nothing");
+                AttrValue::None
+            }
+            _ => {
+                info!("Reload called on firmware attribute {name}");
+                match config.armoury_settings.get(&attribute) {
+                    Some(saved_value) => AttrValue::Integer(*saved_value),
+                    None => AttrValue::None,
+                }
+            }
+        };
+
+        self.attr.set_current_value(&apply_value).map_err(|e| {
+            error!("Could not set {} value: {e:?}", self.attr.name());
+            self.attr.base_path_exists();
+            e
+        })?;
+
+        info!(
+            "Restored asus-armoury setting {} to {:?}",
+            self.attr.name(),
+            apply_value
+        );
+
+        Ok(())
+    }
+}
+
+/// If return is `-1` on a property then there is available value for that
+/// property
+#[interface(name = "xyz.ljones.AsusArmoury")]
+impl AsusArmouryAttribute {
+    #[zbus(property)]
+    fn name(&self) -> FirmwareAttribute {
+        self.attr.name().into()
+    }
+
+    #[zbus(property)]
+    async fn available_attrs(&self) -> Vec<String> {
+        let mut attrs = Vec::new();
+        if !matches!(self.attr.default_value(), AttrValue::None) {
+            attrs.push("default_value".to_string());
+        }
+        if !matches!(self.attr.min_value(), AttrValue::None) {
+            attrs.push("min_value".to_string());
+        }
+        if !matches!(self.attr.max_value(), AttrValue::None) {
+            attrs.push("max_value".to_string());
+        }
+        if !matches!(self.attr.scalar_increment(), AttrValue::None) {
+            attrs.push("scalar_increment".to_string());
+        }
+        if !matches!(self.attr.possible_values(), AttrValue::None) {
+            attrs.push("possible_values".to_string());
+        }
+        // TODO: Don't unwrap, use error
+        if let Ok(value) = self.attr.current_value().map_err(|e| {
+            error!("Failed to read: {e:?}");
+            e
+        }) {
+            if !matches!(value, AttrValue::None) {
+                attrs.push("current_value".to_string());
+            }
+        }
+        attrs
+    }
+
+    /// If return is `-1` then there is no default value
+    #[zbus(property)]
+    async fn default_value(&self) -> i32 {
+        match self.attr.default_value() {
+            AttrValue::Integer(i) => *i,
+            _ => -1,
+        }
+    }
+
+    async fn restore_default(&self) -> fdo::Result<()> {
+        self.attr.restore_default()?;
+        if self.name().property_type() == FirmwareAttributeType::Ppt {
+            let profile: PlatformProfile = self.platform.get_platform_profile()?.into();
+            let power_plugged = self
+                .power
+                .get_online()
+                .map_err(|e| {
+                    error!("Could not get power status: {e:?}");
+                    e
+                })
+                .unwrap_or_default();
+
+            let mut config = self.config.lock().await;
+            let tuning = config.select_tunings(power_plugged == 1, profile);
+            if let Some(tune) = tuning.group.get_mut(&self.name()) {
+                if let AttrValue::Integer(i) = self.attr.default_value() {
+                    *tune = *i;
+                }
+            }
+            if tuning.enabled {
+                self.attr
+                    .set_current_value(self.attr.default_value())
+                    .map_err(|e| {
+                        error!("Could not set value: {e:?}");
+                        e
+                    })?;
+            }
+            config.write();
+        }
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn min_value(&self) -> i32 {
+        Self::resolve_i32_value(self.attr.refresh_min_value(), self.attr.min_value())
+    }
+
+    #[zbus(property)]
+    async fn max_value(&self) -> i32 {
+        Self::resolve_i32_value(self.attr.refresh_max_value(), self.attr.max_value())
+    }
+
+    #[zbus(property)]
+    async fn scalar_increment(&self) -> i32 {
+        Self::resolve_i32_value(
+            self.attr.refresh_scalar_increment(),
+            self.attr.scalar_increment(),
+        )
+    }
+
+    #[zbus(property)]
+    async fn possible_values(&self) -> Vec<i32> {
+        match self.attr.possible_values() {
+            AttrValue::EnumInt(i) => i.clone(),
+            _ => Vec::default(),
+        }
+    }
+
+    #[zbus(property)]
+    async fn current_value(&self) -> fdo::Result<i32> {
+        if self.name().property_type() == FirmwareAttributeType::Ppt {
+            let profile: PlatformProfile = self.platform.get_platform_profile()?.into();
+            let power_plugged = self
+                .power
+                .get_online()
+                .map_err(|e| {
+                    error!("Could not get power status: {e:?}");
+                    e
+                })
+                .unwrap_or_default()
+                == 1;
+            let config = self.config.lock().await;
+            if let Some(tuning) = config.select_tunings_ref(power_plugged, profile) {
+                if let Some(tune) = tuning.group.get(&self.name()) {
+                    return Ok(*tune);
+                }
+            }
+            if let AttrValue::Integer(i) = self.attr.default_value() {
+                return Ok(*i);
+            }
+            return Err(fdo::Error::Failed(
+                "Could not read current value".to_string(),
+            ));
+        }
+
+        if let Ok(AttrValue::Integer(i)) = self.attr.current_value() {
+            return Ok(i);
+        }
+        Err(fdo::Error::Failed(
+            "Could not read current value".to_string(),
+        ))
+    }
+
+    #[zbus(property)]
+    async fn set_current_value(&mut self, value: i32) -> fdo::Result<()> {
+        let name = self.attr.name();
+        let apply_value = match self.name().property_type() {
+            FirmwareAttributeType::Ppt => {
+                let profile: PlatformProfile = self.platform.get_platform_profile()?.into();
+                let power_plugged = self
+                    .power
+                    .get_online()
+                    .map_err(|e| {
+                        error!("Could not get power status: {e:?}");
+                        e
+                    })
+                    .unwrap_or_default();
+
+                let mut config = self.config.lock().await;
+                let tuning = config.select_tunings(power_plugged == 1, profile);
+
+                if let Some(tune) = tuning.group.get_mut(&self.name()) {
+                    *tune = value;
+                } else {
+                    tuning.group.insert(self.name(), value);
+                    debug!("Store tuning config for {name} = {:?}", value);
+                }
+
+                match tuning.enabled {
+                    true => {
+                        debug!("Tuning is enabled: setting value to PPT property {name} = {value}");
+                        AttrValue::Integer(value)
+                    }
+                    false => {
+                        warn!("Tuning is disabled: skipping setting value to PPT property {name}");
+                        AttrValue::None
+                    }
+                }
+            }
+            _ => {
+                let mut settings = self.config.lock().await;
+                settings
+                    .armoury_settings
+                    .entry(self.name())
+                    .and_modify(|setting| {
+                        debug!("Set config for {name} = {value}");
+                        *setting = value;
+                    })
+                    .or_insert_with(|| {
+                        debug!("Adding config for {name} = {value}");
+                        value
+                    });
+
+                AttrValue::Integer(value)
+            }
+        };
+
+        self.attr.set_current_value(&apply_value).map_err(|e| {
+            error!("Could not set value {value} to attribute {name}: {e:?}");
+            e
+        })?;
+
+        // write config after setting value
+        self.config.lock().await.write();
+        Ok(())
+    }
+}
+
+pub async fn start_attributes_zbus(
+    conn: &Connection,
+    platform: RogPlatform,
+    power: AsusPower,
+    attributes: FirmwareAttributes,
+    config: Arc<Mutex<Config>>,
+) -> Result<ArmouryAttributeRegistry, RogError> {
+    let mut registry = ArmouryAttributeRegistry::default();
+    for attr in attributes.attributes() {
+        let mut attr = AsusArmouryAttribute::new(
+            attr.clone(),
+            platform.clone(),
+            power.clone(),
+            config.clone(),
+        );
+
+        let registry_attr = attr.clone();
+
+        if let Err(e) = attr.reload().await {
+            error!(
+                "Skipping attribute '{}' due to reload error: {e:?}",
+                attr.attr.name()
+            );
+            break;
+        }
+
+        let attr_name = attr.attribute_name();
+
+        let path = dbus_path_for_attr(attr_name.as_str());
+        match zbus::object_server::SignalEmitter::new(conn, path) {
+            Ok(sig) => {
+                if let Err(e) = attr.watch_and_notify(sig).await {
+                    error!("Failed to start watcher for '{}': {e:?}", attr.attr.name());
+                }
+            }
+            Err(e) => {
+                error!(
+                    "Failed to create SignalEmitter for '{}': {e:?}",
+                    attr.attr.name()
+                );
+            }
+        }
+
+        if let Err(e) = attr.move_to_zbus(conn).await {
+            error!("Failed to register attribute '{attr_name}' on zbus: {e:?}");
+            continue;
+        }
+
+        registry.push(registry_attr);
+    }
+    Ok(registry)
+}
+
+pub async fn set_config_or_default(
+    attrs: &FirmwareAttributes,
+    config: &mut Config,
+    power_plugged: bool,
+    profile: PlatformProfile,
+) {
+    for attr in attrs.attributes().iter() {
+        let name: FirmwareAttribute = attr.name().into();
+        if name.property_type() == FirmwareAttributeType::Ppt {
+            let tuning = config.select_tunings(power_plugged, profile);
+            if !tuning.enabled {
+                debug!("Tuning group is not enabled, skipping");
+                return;
+            }
+
+            if let Some(tune) = tuning.group.get(&name) {
+                attr.set_current_value(&AttrValue::Integer(*tune))
+                    .map_err(|e| {
+                        error!("Failed to set {}: {e}", <&str>::from(name));
+                    })
+                    .ok();
+            } else {
+                let default = attr.default_value();
+                attr.set_current_value(default)
+                    .map_err(|e| {
+                        error!("Failed to set {}: {e}", <&str>::from(name));
+                    })
+                    .ok();
+                if let AttrValue::Integer(i) = default {
+                    tuning.group.insert(name, *i);
+                    info!(
+                        "Set default tuning config for {} = {:?}",
+                        <&str>::from(name),
+                        i
+                    );
+                    // config.write();
+                }
+            }
+        } else {
+            // Handle non-PPT attributes (boolean and other settings)
+            if let Some(saved_value) = config.armoury_settings.get(&name) {
+                attr.set_current_value(&AttrValue::Integer(*saved_value))
+                    .map_err(|e| {
+                        error!("Failed to set {}: {e}", <&str>::from(name));
+                    })
+                    .ok();
+                info!(
+                    "Restored armoury setting for {} = {:?}",
+                    <&str>::from(name),
+                    saved_value
+                );
+            }
+        }
+    }
+}

asusd/src/aura_anime/config.rs

@@ -1,81 +1,27 @@
 use std::time::Duration;
 
-use config_traits::{StdConfig, StdConfigLoad2};
+use config_traits::{StdConfig, StdConfigLoad};
 use rog_anime::error::AnimeError;
 use rog_anime::usb::Brightness;
 use rog_anime::{
     ActionData, ActionLoader, AnimTime, Animations, AnimeType, DeviceState, Fade, Vec2,
 };
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 
 const CONFIG_FILE: &str = "anime.ron";
 
-#[derive(Deserialize, Serialize)]
-pub struct AnimeConfigV460 {
-    pub system: Vec<ActionLoader>,
-    pub boot: Vec<ActionLoader>,
-    pub wake: Vec<ActionLoader>,
-    pub sleep: Vec<ActionLoader>,
-    pub shutdown: Vec<ActionLoader>,
-    pub brightness: f32,
-}
-
-impl From<AnimeConfigV460> for AnimeConfig {
-    fn from(c: AnimeConfigV460) -> AnimeConfig {
-        AnimeConfig {
-            system: c.system,
-            boot: c.boot,
-            wake: c.wake,
-            shutdown: c.shutdown,
-            ..Default::default()
-        }
-    }
-}
-
-#[derive(Deserialize, Serialize, Debug)]
-pub struct AnimeConfigV472 {
-    pub model_override: Option<AnimeType>,
-    pub system: Vec<ActionLoader>,
-    pub boot: Vec<ActionLoader>,
-    pub wake: Vec<ActionLoader>,
-    pub sleep: Vec<ActionLoader>,
-    pub shutdown: Vec<ActionLoader>,
-    pub brightness: f32,
-    pub display_enabled: bool,
-    pub display_brightness: Brightness,
-    pub builtin_anims_enabled: bool,
-    pub builtin_anims: Animations,
-}
-
-impl From<AnimeConfigV472> for AnimeConfig {
-    fn from(c: AnimeConfigV472) -> AnimeConfig {
-        AnimeConfig {
-            system: c.system,
-            boot: c.boot,
-            wake: c.wake,
-            shutdown: c.shutdown,
-            model_override: c.model_override,
-            display_enabled: c.display_enabled,
-            display_brightness: c.display_brightness,
-            builtin_anims_enabled: c.builtin_anims_enabled,
-            builtin_anims: c.builtin_anims,
-            ..Default::default()
-        }
-    }
-}
-
-#[derive(Deserialize, Serialize, Default)]
-pub struct AnimeConfigCached {
+#[derive(Debug, Clone, Deserialize, Serialize, Default)]
+pub struct AniMeConfigCached {
     pub system: Vec<ActionData>,
     pub boot: Vec<ActionData>,
     pub wake: Vec<ActionData>,
     pub shutdown: Vec<ActionData>,
 }
 
-impl AnimeConfigCached {
+impl AniMeConfigCached {
     pub fn init_from_config(
         &mut self,
-        config: &AnimeConfig,
+        config: &AniMeConfig,
         anime_type: AnimeType,
     ) -> Result<(), AnimeError> {
         let mut sys = Vec::with_capacity(config.system.len());
@@ -107,8 +53,9 @@ impl AnimeConfigCached {
 
 /// Config for base system actions for the anime display
 #[derive(Deserialize, Serialize, Debug, Clone)]
-pub struct AnimeConfig {
-    pub model_override: Option<AnimeType>,
+pub struct AniMeConfig {
+    #[serde(skip)]
+    pub anime_type: AnimeType,
     pub system: Vec<ActionLoader>,
     pub boot: Vec<ActionLoader>,
     pub wake: Vec<ActionLoader>,
@@ -124,10 +71,10 @@ pub struct AnimeConfig {
     pub builtin_anims: Animations,
 }
 
-impl Default for AnimeConfig {
+impl Default for AniMeConfig {
     fn default() -> Self {
-        AnimeConfig {
-            model_override: None,
+        AniMeConfig {
+            anime_type: AnimeType::GA402,
             system: Vec::new(),
             boot: Vec::new(),
             wake: Vec::new(),
@@ -145,7 +92,7 @@ impl Default for AnimeConfig {
     }
 }
 
-impl StdConfig for AnimeConfig {
+impl StdConfig for AniMeConfig {
     fn new() -> Self {
         Self::create_default()
     }
@@ -159,10 +106,10 @@ impl StdConfig for AnimeConfig {
     }
 }
 
-impl StdConfigLoad2<AnimeConfigV460, AnimeConfigV472> for AnimeConfig {}
+impl StdConfigLoad for AniMeConfig {}
 
-impl From<&AnimeConfig> for DeviceState {
-    fn from(config: &AnimeConfig) -> Self {
+impl From<&AniMeConfig> for DeviceState {
+    fn from(config: &AniMeConfig) -> Self {
         DeviceState {
             display_enabled: config.display_enabled,
             display_brightness: config.display_brightness,
@@ -176,7 +123,7 @@ impl From<&AnimeConfig> for DeviceState {
     }
 }
 
-impl AnimeConfig {
+impl AniMeConfig {
     // fn clamp_config_brightness(mut config: &mut AnimeConfig) {
     //     if config.brightness < 0.0 || config.brightness > 1.0 {
     //         warn!(
@@ -189,40 +136,46 @@ impl AnimeConfig {
 
     fn create_default() -> Self {
         // create a default config here
-        AnimeConfig {
+        AniMeConfig {
             system: vec![],
-            boot: vec![ActionLoader::ImageAnimation {
-                file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
-                scale: 0.9,
-                angle: 0.65,
-                translation: Vec2::default(),
-                brightness: 1.0,
-                time: AnimTime::Fade(Fade::new(
-                    Duration::from_secs(2),
-                    Some(Duration::from_secs(2)),
-                    Duration::from_secs(2),
-                )),
-            }],
-            wake: vec![ActionLoader::ImageAnimation {
-                file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
-                scale: 0.9,
-                angle: 0.65,
-                translation: Vec2::default(),
-                brightness: 1.0,
-                time: AnimTime::Fade(Fade::new(
-                    Duration::from_secs(2),
-                    Some(Duration::from_secs(2)),
-                    Duration::from_secs(2),
-                )),
-            }],
-            shutdown: vec![ActionLoader::ImageAnimation {
-                file: "/usr/share/asusd/anime/custom/sonic-wait.gif".into(),
-                scale: 0.9,
-                angle: 0.0,
-                translation: Vec2::new(3.0, 2.0),
-                brightness: 1.0,
-                time: AnimTime::Infinite,
-            }],
+            boot: vec![
+                ActionLoader::ImageAnimation {
+                    file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                    scale: 0.9,
+                    angle: 0.65,
+                    translation: Vec2::default(),
+                    brightness: 1.0,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        Some(Duration::from_secs(2)),
+                        Duration::from_secs(2),
+                    )),
+                },
+            ],
+            wake: vec![
+                ActionLoader::ImageAnimation {
+                    file: "/usr/share/asusd/anime/custom/sonic-run.gif".into(),
+                    scale: 0.9,
+                    angle: 0.65,
+                    translation: Vec2::default(),
+                    brightness: 1.0,
+                    time: AnimTime::Fade(Fade::new(
+                        Duration::from_secs(2),
+                        Some(Duration::from_secs(2)),
+                        Duration::from_secs(2),
+                    )),
+                },
+            ],
+            shutdown: vec![
+                ActionLoader::ImageAnimation {
+                    file: "/usr/share/asusd/anime/custom/sonic-wait.gif".into(),
+                    scale: 0.9,
+                    angle: 0.0,
+                    translation: Vec2::new(3.0, 2.0),
+                    brightness: 1.0,
+                    time: AnimTime::Infinite,
+                },
+            ],
             ..Default::default()
         }
     }

asusd/src/aura_anime/mod.rs

@@ -0,0 +1,248 @@
+pub mod config;
+/// Implements `CtrlTask`, Reloadable, `ZbusRun`
+pub mod trait_impls;
+
+use std::convert::TryFrom;
+use std::sync::atomic::{AtomicBool, Ordering};
+use std::sync::Arc;
+use std::thread::sleep;
+
+use config_traits::StdConfig;
+use log::{debug, error, info, warn};
+use rog_anime::usb::{
+    pkt_flush, pkt_set_brightness, pkt_set_enable_display, pkt_set_enable_powersave_anim,
+    pkts_for_init, Brightness,
+};
+use rog_anime::{ActionData, AnimeDataBuffer, AnimePacketType};
+use rog_platform::hid_raw::HidRaw;
+use rog_platform::usb_raw::USBRaw;
+use tokio::sync::Mutex;
+
+use self::config::{AniMeConfig, AniMeConfigCached};
+use crate::error::RogError;
+
+#[derive(Debug, Clone)]
+pub struct AniMe {
+    hid: Option<Arc<Mutex<HidRaw>>>,
+    usb: Option<Arc<Mutex<USBRaw>>>,
+    config: Arc<Mutex<AniMeConfig>>,
+    cache: AniMeConfigCached,
+    // set to force thread to exit
+    thread_exit: Arc<AtomicBool>,
+    // Set to false when the thread exits
+    thread_running: Arc<AtomicBool>,
+}
+
+impl AniMe {
+    pub fn new(
+        hid: Option<Arc<Mutex<HidRaw>>>,
+        usb: Option<Arc<Mutex<USBRaw>>>,
+        config: Arc<Mutex<AniMeConfig>>,
+    ) -> Self {
+        Self {
+            hid,
+            usb,
+            config,
+            cache: AniMeConfigCached::default(),
+            thread_exit: Arc::new(AtomicBool::new(false)),
+            thread_running: Arc::new(AtomicBool::new(false)),
+        }
+    }
+
+    /// Will fail if something is already holding the config lock
+    async fn do_init_cache(&mut self) {
+        if let Ok(mut config) = self.config.try_lock() {
+            if let Err(e) = self.cache.init_from_config(&config, config.anime_type) {
+                error!(
+                    "Trying to cache the Anime Config failed, will reset to default config: {e:?}"
+                );
+                config.rename_file_old();
+                *config = AniMeConfig::new();
+                config.write();
+            } else {
+                debug!("Initialised AniMe cache");
+            }
+        } else {
+            error!("AniMe Matrix could not init cache")
+        }
+    }
+
+    /// Initialise the device if required.
+    pub async fn do_initialization(&mut self) -> Result<(), RogError> {
+        self.do_init_cache().await;
+        let pkts = pkts_for_init();
+        self.write_bytes(&pkts[0]).await?;
+        self.write_bytes(&pkts[1]).await?;
+        debug!("Succesfully initialised AniMe matrix display");
+        Ok(())
+    }
+
+    pub async fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
+        if let Some(hid) = &self.hid {
+            hid.lock().await.write_bytes(message)?;
+        } else if let Some(usb) = &self.usb {
+            usb.lock().await.write_bytes(message)?;
+        }
+        Ok(())
+    }
+
+    /// Write only a data packet. This will modify the leds brightness using the
+    /// global brightness set in config.
+    async fn write_data_buffer(&self, mut buffer: AnimeDataBuffer) -> Result<(), RogError> {
+        for led in buffer.data_mut().iter_mut() {
+            let mut bright = *led as f32;
+            if bright > 254.0 {
+                bright = 254.0;
+            }
+            *led = bright as u8;
+        }
+        let data = AnimePacketType::try_from(buffer)?;
+        for row in &data {
+            self.write_bytes(row).await?;
+        }
+        self.write_bytes(&pkt_flush()).await
+    }
+
+    pub async fn set_builtins_enabled(
+        &self,
+        enabled: bool,
+        bright: Brightness,
+    ) -> Result<(), RogError> {
+        self.write_bytes(&pkt_set_enable_powersave_anim(enabled))
+            .await?;
+        self.write_bytes(&pkt_set_enable_display(enabled)).await?;
+        self.write_bytes(&pkt_set_brightness(bright)).await?;
+        self.write_bytes(&pkt_set_enable_powersave_anim(enabled))
+            .await
+    }
+
+    /// Start an action thread. This is classed as a singleton and there should
+    /// be only one running - so the thread uses atomics to signal run/exit.
+    ///
+    /// Because this also writes to the usb device, other write tries (display
+    /// only) *must* get the mutex lock and set the `thread_exit` atomic.
+    async fn run_thread(&self, actions: Vec<ActionData>, mut once: bool) {
+        if actions.is_empty() {
+            warn!("AniMe system actions was empty");
+            return;
+        }
+
+        self.write_bytes(&pkt_set_enable_powersave_anim(false))
+            .await
+            .map_err(|err| {
+                warn!("rog_anime::run_animation:callback {}", err);
+            })
+            .ok();
+
+        let thread_exit = self.thread_exit.clone();
+        let thread_running = self.thread_running.clone();
+        let anime_type = self.config.lock().await.anime_type;
+        let inner = self.clone();
+
+        // Loop rules:
+        // - Lock the mutex **only when required**. That is, the lock must be held for
+        //   the shortest duration possible.
+        // - An AtomicBool used for thread exit should be checked in every loop,
+        //   including nested
+
+        // The only reason for this outer thread is to prevent blocking while waiting
+        // for the next spawned thread to exit
+        // TODO: turn this in to async task (maybe? COuld still risk blocking main
+        // thread)
+        tokio::spawn(async move {
+            info!("AniMe new system thread started");
+            // First two loops are to ensure we *do* aquire a lock on the mutex
+            // The reason the loop is required is because the USB writes can block
+            // for up to 10ms. We can't fail to get the atomics.
+            while thread_running.load(Ordering::SeqCst) {
+                // Make any running loop exit first
+                thread_exit.store(true, Ordering::SeqCst);
+            }
+
+            info!("AniMe no previous system thread running (now)");
+            thread_exit.store(false, Ordering::SeqCst);
+            thread_running.store(true, Ordering::SeqCst);
+            'main: loop {
+                for action in &actions {
+                    if thread_exit.load(Ordering::SeqCst) {
+                        break 'main;
+                    }
+                    match action {
+                        ActionData::Animation(frames) => {
+                            // TODO: sort all this out
+                            rog_anime::run_animation(frames, &|frame| {
+                                if thread_exit.load(Ordering::Acquire) {
+                                    info!("rog-anime: animation sub-loop was asked to exit");
+                                    return Ok(true); // Do safe exit
+                                }
+                                let inner = inner.clone();
+                                tokio::task::spawn(async move {
+                                    inner
+                                        .write_data_buffer(frame)
+                                        .await
+                                        .map_err(|err| {
+                                            warn!("rog_anime::run_animation:callback {}", err);
+                                        })
+                                        .ok();
+                                });
+                                Ok(false) // Don't exit yet
+                            });
+                            if thread_exit.load(Ordering::Acquire) {
+                                info!("rog-anime: sub-loop exited and main loop exiting now");
+                                break 'main;
+                            }
+                        }
+                        ActionData::Image(image) => {
+                            once = false;
+                            inner
+                                .write_data_buffer(image.as_ref().clone())
+                                .await
+                                .map_err(|e| error!("{}", e))
+                                .ok();
+                        }
+                        ActionData::Pause(duration) => sleep(*duration),
+                        ActionData::AudioEq
+                        | ActionData::SystemInfo
+                        | ActionData::TimeDate
+                        | ActionData::Matrix => {}
+                    }
+                }
+                if thread_exit.load(Ordering::SeqCst) {
+                    break 'main;
+                }
+                if once || actions.is_empty() {
+                    break 'main;
+                }
+            }
+            // Clear the display on exit
+            if let Ok(data) =
+                AnimeDataBuffer::from_vec(anime_type, vec![0u8; anime_type.data_length()])
+                    .map_err(|e| error!("{}", e))
+            {
+                inner
+                    .write_data_buffer(data)
+                    .await
+                    .map_err(|err| {
+                        warn!("rog_anime::run_animation:callback {}", err);
+                    })
+                    .ok();
+            }
+            // A write can block for many milliseconds so lets not hold the config lock for
+            // the same period
+            let enabled = inner.config.lock().await.builtin_anims_enabled;
+            inner
+                .write_bytes(&pkt_set_enable_powersave_anim(enabled))
+                .await
+                .map_err(|err| {
+                    warn!("rog_anime::run_animation:callback {}", err);
+                })
+                .ok();
+            // Loop ended, set the atmonics
+            thread_running.store(false, Ordering::SeqCst);
+            info!("AniMe system thread exited");
+        })
+        .await
+        .map(|err| info!("AniMe system thread: {:?}", err))
+        .ok();
+    }
+}

asusd/src/aura_anime/trait_impls.rs

@@ -1,23 +1,22 @@
 use std::sync::atomic::Ordering;
-use std::sync::Arc;
 
 use config_traits::StdConfig;
-use log::warn;
+use log::{debug, error, warn};
 use logind_zbus::manager::ManagerProxy;
 use rog_anime::usb::{
     pkt_set_brightness, pkt_set_builtin_animations, pkt_set_enable_display,
     pkt_set_enable_powersave_anim, Brightness,
 };
 use rog_anime::{Animations, AnimeDataBuffer, DeviceState};
-use zbus::export::futures_util::lock::Mutex;
-use zbus::{interface, CacheProperties, Connection, SignalContext};
+use zbus::object_server::SignalEmitter;
+use zbus::proxy::CacheProperties;
+use zbus::zvariant::OwnedObjectPath;
+use zbus::{interface, Connection};
 
-use super::config::AnimeConfig;
-use super::CtrlAnime;
+use super::config::AniMeConfig;
+use super::AniMe;
 use crate::error::RogError;
-
-pub const ANIME_ZBUS_NAME: &str = "Anime";
-pub const ANIME_ZBUS_PATH: &str = "/org/asuslinux";
+use crate::Reloadable;
 
 async fn get_logind_manager<'a>() -> ManagerProxy<'a> {
     let connection = Connection::system()
@@ -32,104 +31,121 @@ async fn get_logind_manager<'a>() -> ManagerProxy<'a> {
 }
 
 #[derive(Clone)]
-pub struct CtrlAnimeZbus(pub Arc<Mutex<CtrlAnime>>);
+pub struct AniMeZbus(AniMe);
 
-/// The struct with the main dbus methods requires this trait
-impl crate::ZbusRun for CtrlAnimeZbus {
-    async fn add_to_server(self, server: &mut Connection) {
-        Self::add_to_server_helper(self, ANIME_ZBUS_PATH, server).await;
+impl AniMeZbus {
+    pub fn new(anime: AniMe) -> Self {
+        Self(anime)
+    }
+
+    pub async fn start_tasks(
+        mut self,
+        connection: &Connection,
+        path: OwnedObjectPath,
+    ) -> Result<(), RogError> {
+        // let task = zbus.clone();
+        self.reload()
+            .await
+            .unwrap_or_else(|err| warn!("Controller error: {}", err));
+        connection
+            .object_server()
+            .at(path.clone(), self)
+            .await
+            .map_err(|e| {
+                error!("Couldn't add server at path: {path}, {e:?}");
+                e
+            })?;
+        debug!("start_tasks was successful");
+        Ok(())
     }
 }
 
 // None of these calls can be guarnateed to succeed unless we loop until okay
 // If the try_lock *does* succeed then any other thread trying to lock will not
 // grab it until we finish.
-#[interface(name = "org.asuslinux.Anime")]
-impl CtrlAnimeZbus {
+#[interface(name = "xyz.ljones.Anime")]
+impl AniMeZbus {
     /// Writes a data stream of length. Will force system thread to exit until
     /// it is restarted
     async fn write(&self, input: AnimeDataBuffer) -> zbus::fdo::Result<()> {
-        self.0
-            .lock()
-            .await
-            .thread_exit
-            .store(true, Ordering::SeqCst);
-        self.0
-            .lock()
-            .await
-            .write_data_buffer(input)
-            .map_err(|err| {
-                warn!("ctrl_anime::run_animation:callback {}", err);
-                err
-            })?;
+        let bright = self.0.config.lock().await.display_brightness;
+        if self.0.config.lock().await.builtin_anims_enabled {
+            // This clears the display, causing flickers if done indiscriminately on every
+            // write. Therefore, we guard it behind a config check.
+            self.0.set_builtins_enabled(false, bright).await?;
+        }
+        self.0.thread_exit.store(true, Ordering::SeqCst);
+        self.0.write_data_buffer(input).await.map_err(|err| {
+            warn!("ctrl_anime::run_animation:callback {}", err);
+            err
+        })?;
         Ok(())
     }
 
     /// Set base brightness level
     #[zbus(property)]
     async fn brightness(&self) -> Brightness {
-        self.0.lock().await.config.display_brightness
+        if let Ok(config) = self.0.config.try_lock() {
+            return config.display_brightness;
+        }
+        Brightness::Off
     }
 
     /// Set base brightness level
     #[zbus(property)]
     async fn set_brightness(&self, brightness: Brightness) {
         self.0
-            .lock()
-            .await
-            .node
             .write_bytes(&pkt_set_brightness(brightness))
+            .await
             .map_err(|err| {
                 warn!("ctrl_anime::set_brightness {}", err);
             })
             .ok();
         self.0
-            .lock()
-            .await
-            .node
             .write_bytes(&pkt_set_enable_display(brightness != Brightness::Off))
+            .await
             .map_err(|err| {
                 warn!("ctrl_anime::set_brightness {}", err);
             })
             .ok();
 
-        self.0.lock().await.config.display_enabled = brightness != Brightness::Off;
-        self.0.lock().await.config.display_brightness = brightness;
-        self.0.lock().await.config.write();
+        let mut config = self.0.config.lock().await;
+        config.display_enabled = brightness != Brightness::Off;
+        config.display_brightness = brightness;
+        config.write();
     }
 
     #[zbus(property)]
     async fn builtins_enabled(&self) -> bool {
-        let lock = self.0.lock().await;
-        lock.config.builtin_anims_enabled
+        if let Ok(config) = self.0.config.try_lock() {
+            return config.builtin_anims_enabled;
+        }
+        false
     }
 
     /// Enable the builtin animations or not. This is quivalent to "Powersave
     /// animations" in Armory crate
     #[zbus(property)]
     async fn set_builtins_enabled(&self, enabled: bool) {
-        let brightness = self.0.lock().await.config.display_brightness;
+        let mut config = self.0.config.lock().await;
+        let brightness = config.display_brightness;
         self.0
-            .lock()
-            .await
-            .node
             .set_builtins_enabled(enabled, brightness)
+            .await
             .map_err(|err| {
                 warn!("ctrl_anime::set_builtins_enabled {}", err);
             })
             .ok();
 
         if !enabled {
-            let anime_type = self.0.lock().await.anime_type;
+            let anime_type = config.anime_type;
             let data = vec![255u8; anime_type.data_length()];
             if let Ok(tmp) = AnimeDataBuffer::from_vec(anime_type, data).map_err(|err| {
                 warn!("ctrl_anime::set_builtins_enabled {}", err);
             }) {
                 self.0
-                    .lock()
-                    .await
-                    .node
                     .write_bytes(tmp.data())
+                    .await
                     .map_err(|err| {
                         warn!("ctrl_anime::set_builtins_enabled {}", err);
                     })
@@ -137,77 +153,75 @@ impl CtrlAnimeZbus {
             }
         }
 
-        self.0.lock().await.config.builtin_anims_enabled = enabled;
-        self.0.lock().await.config.write();
+        config.builtin_anims_enabled = enabled;
+        config.write();
         if enabled {
-            self.0
-                .lock()
-                .await
-                .thread_exit
-                .store(true, Ordering::Release);
+            self.0.thread_exit.store(true, Ordering::Release);
         }
     }
 
     #[zbus(property)]
     async fn builtin_animations(&self) -> Animations {
-        self.0.lock().await.config.builtin_anims
+        if let Ok(config) = self.0.config.try_lock() {
+            return config.builtin_anims;
+        }
+        Animations::default()
     }
 
     /// Set which builtin animation is used for each stage
     #[zbus(property)]
     async fn set_builtin_animations(&self, settings: Animations) {
         self.0
-            .lock()
-            .await
-            .node
             .write_bytes(&pkt_set_builtin_animations(
-                settings.boot,
-                settings.awake,
-                settings.sleep,
-                settings.shutdown,
+                settings.boot, settings.awake, settings.sleep, settings.shutdown,
             ))
+            .await
             .map_err(|err| {
                 warn!("ctrl_anime::run_animation:callback {}", err);
             })
             .ok();
         self.0
-            .lock()
-            .await
-            .node
             .write_bytes(&pkt_set_enable_powersave_anim(true))
+            .await
             .map_err(|err| {
                 warn!("ctrl_anime::run_animation:callback {}", err);
             })
             .ok();
-        self.0.lock().await.config.display_enabled = true;
-        self.0.lock().await.config.builtin_anims = settings;
-        self.0.lock().await.config.write();
+        let mut config = self.0.config.lock().await;
+        config.display_enabled = true;
+        config.builtin_anims = settings;
+        config.write();
     }
 
     #[zbus(property)]
     async fn enable_display(&self) -> bool {
-        self.0.lock().await.config.display_enabled
+        if let Ok(config) = self.0.config.try_lock() {
+            return config.display_enabled;
+        }
+        false
     }
 
     /// Set whether the AniMe is enabled at all
     #[zbus(property)]
     async fn set_enable_display(&self, enabled: bool) {
         self.0
-            .lock()
-            .await
-            .node
             .write_bytes(&pkt_set_enable_display(enabled))
+            .await
             .map_err(|err| {
                 warn!("ctrl_anime::run_animation:callback {}", err);
             })
             .ok();
-        self.0.lock().await.config.display_enabled = enabled;
-        self.0.lock().await.config.write();
+        let mut config = self.0.config.lock().await;
+        config.display_enabled = enabled;
+        config.write();
     }
 
     #[zbus(property)]
     async fn off_when_unplugged(&self) -> bool {
-        self.0.lock().await.config.off_when_unplugged
+        if let Ok(config) = self.0.config.try_lock() {
+            return config.off_when_unplugged;
+        }
+        false
     }
 
     /// Set if to turn the AniMe Matrix off when external power is unplugged
@@ -217,34 +231,40 @@ impl CtrlAnimeZbus {
         let pow = manager.on_external_power().await.unwrap_or_default();
 
         self.0
-            .lock()
-            .await
-            .node
             .write_bytes(&pkt_set_enable_display(!pow && !enabled))
+            .await
             .map_err(|err| {
                 warn!("create_sys_event_tasks::off_when_lid_closed {}", err);
             })
             .ok();
 
-        self.0.lock().await.config.off_when_unplugged = enabled;
-        self.0.lock().await.config.write();
+        let mut config = self.0.config.lock().await;
+        config.off_when_unplugged = enabled;
+        config.write();
     }
 
     #[zbus(property)]
     async fn off_when_suspended(&self) -> bool {
-        self.0.lock().await.config.off_when_suspended
+        if let Ok(config) = self.0.config.try_lock() {
+            return config.off_when_suspended;
+        }
+        false
     }
 
     /// Set if to turn the AniMe Matrix off when the laptop is suspended
     #[zbus(property)]
     async fn set_off_when_suspended(&self, enabled: bool) {
-        self.0.lock().await.config.off_when_suspended = enabled;
-        self.0.lock().await.config.write();
+        let mut config = self.0.config.lock().await;
+        config.off_when_suspended = enabled;
+        config.write();
     }
 
     #[zbus(property)]
     async fn off_when_lid_closed(&self) -> bool {
-        self.0.lock().await.config.off_when_lid_closed
+        if let Ok(config) = self.0.config.try_lock() {
+            return config.off_when_lid_closed;
+        }
+        false
     }
 
     /// Set if to turn the AniMe Matrix off when the lid is closed
@@ -254,50 +274,40 @@ impl CtrlAnimeZbus {
         let lid = manager.lid_closed().await.unwrap_or_default();
 
         self.0
-            .lock()
-            .await
-            .node
             .write_bytes(&pkt_set_enable_display(lid && !enabled))
+            .await
             .map_err(|err| {
                 warn!("create_sys_event_tasks::off_when_lid_closed {}", err);
             })
             .ok();
 
-        self.0.lock().await.config.off_when_lid_closed = enabled;
-        self.0.lock().await.config.write();
+        let mut config = self.0.config.lock().await;
+        config.off_when_lid_closed = enabled;
+        config.write();
     }
 
     /// The main loop is the base system set action if the user isn't running
     /// the user daemon
     async fn run_main_loop(&self, start: bool) {
         if start {
-            self.0
-                .lock()
-                .await
-                .thread_exit
-                .store(true, Ordering::SeqCst);
-            CtrlAnime::run_thread(
-                self.0.clone(),
-                self.0.lock().await.cache.system.clone(),
-                false,
-            )
-            .await;
+            self.0.thread_exit.store(true, Ordering::SeqCst);
+            self.0.run_thread(self.0.cache.system.clone(), false).await;
         }
     }
 
     /// Get the device state as stored by asusd
     // #[zbus(property)]
     async fn device_state(&self) -> DeviceState {
-        DeviceState::from(&self.0.lock().await.config)
+        DeviceState::from(&*self.0.config.lock().await)
     }
 }
 
-impl crate::CtrlTask for CtrlAnimeZbus {
+impl crate::CtrlTask for AniMeZbus {
     fn zbus_path() -> &'static str {
-        ANIME_ZBUS_PATH
+        "ANIME_ZBUS_PATH"
     }
 
-    async fn create_tasks(&self, _: SignalContext<'static>) -> Result<(), RogError> {
+    async fn create_tasks(&self, _: SignalEmitter<'static>) -> Result<(), RogError> {
         let inner1 = self.0.clone();
         let inner2 = self.0.clone();
         let inner3 = self.0.clone();
@@ -307,21 +317,15 @@ impl crate::CtrlTask for CtrlAnimeZbus {
                 // on_sleep
                 let inner = inner1.clone();
                 async move {
-                    let config = inner.lock().await.config.clone();
+                    let config = inner.config.lock().await.clone();
                     if config.display_enabled {
-                        inner
-                            .lock()
-                            .await
-                            .thread_exit
-                            .store(true, Ordering::Release); // ensure clean slate
+                        inner.thread_exit.store(true, Ordering::Release); // ensure clean slate
 
                         inner
-                            .lock()
-                            .await
-                            .node
                             .write_bytes(&pkt_set_enable_display(
                                 !(sleeping && config.off_when_suspended),
                             ))
+                            .await
                             .map_err(|err| {
                                 warn!("create_sys_event_tasks::off_when_suspended {}", err);
                             })
@@ -329,12 +333,10 @@ impl crate::CtrlTask for CtrlAnimeZbus {
 
                         if config.builtin_anims_enabled {
                             inner
-                                .lock()
-                                .await
-                                .node
                                 .write_bytes(&pkt_set_enable_powersave_anim(
                                     !(sleeping && config.off_when_suspended),
                                 ))
+                                .await
                                 .map_err(|err| {
                                     warn!("create_sys_event_tasks::off_when_suspended {}", err);
                                 })
@@ -342,18 +344,11 @@ impl crate::CtrlTask for CtrlAnimeZbus {
                         } else if !sleeping && !config.builtin_anims_enabled {
                             // Run custom wake animation
                             inner
-                                .lock()
-                                .await
-                                .node
                                 .write_bytes(&pkt_set_enable_powersave_anim(false))
+                                .await
                                 .ok(); // ensure builtins are disabled
 
-                            CtrlAnime::run_thread(
-                                inner.clone(),
-                                inner.lock().await.cache.wake.clone(),
-                                true,
-                            )
-                            .await;
+                            inner.run_thread(inner.cache.wake.clone(), true).await;
                         }
                     }
                 }
@@ -362,26 +357,16 @@ impl crate::CtrlTask for CtrlAnimeZbus {
                 // on_shutdown
                 let inner = inner2.clone();
                 async move {
-                    let AnimeConfig {
+                    let AniMeConfig {
                         display_enabled,
                         builtin_anims_enabled,
                         ..
-                    } = inner.lock().await.config;
+                    } = *inner.config.lock().await;
                     if display_enabled && !builtin_anims_enabled {
                         if shutting_down {
-                            CtrlAnime::run_thread(
-                                inner.clone(),
-                                inner.lock().await.cache.shutdown.clone(),
-                                true,
-                            )
-                            .await;
+                            inner.run_thread(inner.cache.shutdown.clone(), true).await;
                         } else {
-                            CtrlAnime::run_thread(
-                                inner.clone(),
-                                inner.lock().await.cache.boot.clone(),
-                                true,
-                            )
-                            .await;
+                            inner.run_thread(inner.cache.boot.clone(), true).await;
                         }
                     }
                 }
@@ -390,28 +375,24 @@ impl crate::CtrlTask for CtrlAnimeZbus {
                 let inner = inner3.clone();
                 // on lid change
                 async move {
-                    let AnimeConfig {
+                    let AniMeConfig {
                         off_when_lid_closed,
                         builtin_anims_enabled,
                         ..
-                    } = inner.lock().await.config;
+                    } = *inner.config.lock().await;
                     if off_when_lid_closed {
                         if builtin_anims_enabled {
                             inner
-                                .lock()
-                                .await
-                                .node
                                 .write_bytes(&pkt_set_enable_powersave_anim(!lid_closed))
+                                .await
                                 .map_err(|err| {
                                     warn!("create_sys_event_tasks::off_when_suspended {}", err);
                                 })
                                 .ok();
                         }
                         inner
-                            .lock()
-                            .await
-                            .node
                             .write_bytes(&pkt_set_enable_display(!lid_closed))
+                            .await
                             .map_err(|err| {
                                 warn!("create_sys_event_tasks::off_when_lid_closed {}", err);
                             })
@@ -423,39 +404,33 @@ impl crate::CtrlTask for CtrlAnimeZbus {
                 let inner = inner4.clone();
                 // on power change
                 async move {
-                    let AnimeConfig {
+                    let AniMeConfig {
                         off_when_unplugged,
                         builtin_anims_enabled,
                         brightness_on_battery,
                         ..
-                    } = inner.lock().await.config;
+                    } = *inner.config.lock().await;
                     if off_when_unplugged {
                         if builtin_anims_enabled {
                             inner
-                                .lock()
-                                .await
-                                .node
                                 .write_bytes(&pkt_set_enable_powersave_anim(power_plugged))
+                                .await
                                 .map_err(|err| {
                                     warn!("create_sys_event_tasks::off_when_suspended {}", err);
                                 })
                                 .ok();
                         }
                         inner
-                            .lock()
-                            .await
-                            .node
                             .write_bytes(&pkt_set_enable_display(power_plugged))
+                            .await
                             .map_err(|err| {
                                 warn!("create_sys_event_tasks::off_when_unplugged {}", err);
                             })
                             .ok();
                     } else {
                         inner
-                            .lock()
-                            .await
-                            .node
                             .write_bytes(&pkt_set_brightness(brightness_on_battery))
+                            .await
                             .map_err(|err| {
                                 warn!("create_sys_event_tasks::off_when_unplugged {}", err);
                             })
@@ -470,52 +445,62 @@ impl crate::CtrlTask for CtrlAnimeZbus {
     }
 }
 
-impl crate::Reloadable for CtrlAnimeZbus {
+impl crate::Reloadable for AniMeZbus {
     async fn reload(&mut self) -> Result<(), RogError> {
-        if let Some(lock) = self.0.try_lock() {
-            let anim = &lock.config.builtin_anims;
-            // Set builtins
-            if lock.config.builtin_anims_enabled {
-                lock.node.write_bytes(&pkt_set_builtin_animations(
-                    anim.boot,
-                    anim.awake,
-                    anim.sleep,
-                    anim.shutdown,
-                ))?;
-            }
-            // Builtins enabled or na?
-            lock.node.set_builtins_enabled(
-                lock.config.builtin_anims_enabled,
-                lock.config.display_brightness,
-            )?;
+        let AniMeConfig {
+            builtin_anims_enabled,
+            builtin_anims,
+            display_enabled,
+            display_brightness,
+            off_when_lid_closed,
+            off_when_unplugged,
+            ..
+        } = *self.0.config.lock().await;
 
-            let manager = get_logind_manager().await;
-            let lid_closed = manager.lid_closed().await.unwrap_or_default();
-            let power_plugged = manager.on_external_power().await.unwrap_or_default();
+        // Set builtins
+        if builtin_anims_enabled {
+            self.0
+                .write_bytes(&pkt_set_builtin_animations(
+                    builtin_anims.boot,
+                    builtin_anims.awake,
+                    builtin_anims.sleep,
+                    builtin_anims.shutdown,
+                ))
+                .await?;
+        }
+        // Builtins enabled or na?
+        self.0
+            .set_builtins_enabled(builtin_anims_enabled, display_brightness)
+            .await?;
 
-            let turn_off = (lid_closed && lock.config.off_when_lid_closed)
-                || (!power_plugged && lock.config.off_when_unplugged);
-            lock.node
-                .write_bytes(&pkt_set_enable_display(!turn_off))
-                .map_err(|err| {
-                    warn!("create_sys_event_tasks::reload {}", err);
-                })
+        let manager = get_logind_manager().await;
+        let lid_closed = manager.lid_closed().await.unwrap_or_default();
+        let power_plugged = manager.on_external_power().await.unwrap_or_default();
+
+        let turn_off =
+            (lid_closed && off_when_lid_closed) || (!power_plugged && off_when_unplugged);
+        self.0
+            .write_bytes(&pkt_set_enable_display(!turn_off))
+            .await
+            .map_err(|err| {
+                warn!("create_sys_event_tasks::reload {}", err);
+            })
+            .ok();
+
+        if turn_off || !display_enabled {
+            self.0.write_bytes(&pkt_set_enable_display(false)).await?;
+            // early return so we don't run animation thread
+            return Ok(());
+        }
+
+        if !builtin_anims_enabled && !self.0.cache.boot.is_empty() {
+            self.0
+                .write_bytes(&pkt_set_enable_powersave_anim(false))
+                .await
                 .ok();
 
-            if turn_off || !lock.config.display_enabled {
-                lock.node.write_bytes(&pkt_set_enable_display(false))?;
-                // early return so we don't run animation thread
-                return Ok(());
-            }
-
-            if !lock.config.builtin_anims_enabled && !lock.cache.boot.is_empty() {
-                lock.node
-                    .write_bytes(&pkt_set_enable_powersave_anim(false))
-                    .ok();
-
-                let action = lock.cache.boot.clone();
-                CtrlAnime::run_thread(self.0.clone(), action, true).await;
-            }
+            let action = self.0.cache.boot.clone();
+            self.0.run_thread(action, true).await;
         }
         Ok(())
     }

asusd/src/aura_laptop/config.rs

@@ -7,12 +7,20 @@ use rog_aura::keyboard::LaptopAuraPower;
 use rog_aura::{
     AuraDeviceType, AuraEffect, AuraModeNum, AuraZone, Direction, LedBrightness, Speed, GRADIENT,
 };
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
+
+use crate::error::RogError;
 
 #[derive(Deserialize, Serialize, Default, Debug, Clone)]
 // #[serde(default)]
 pub struct AuraConfig {
+    #[serde(skip)]
+    pub led_type: AuraDeviceType,
+    #[serde(skip)]
+    pub support_data: LedSupportData,
     pub config_name: String,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
+    pub ally_fix: Option<bool>,
     pub brightness: LedBrightness,
     pub current_mode: AuraModeNum,
     pub builtins: BTreeMap<AuraModeNum, AuraEffect>,
@@ -20,6 +28,8 @@ pub struct AuraConfig {
     pub multizone: Option<BTreeMap<AuraModeNum, Vec<AuraEffect>>>,
     pub multizone_on: bool,
     pub enabled: LaptopAuraPower,
+    #[serde(skip)]
+    pub per_key_mode_active: bool,
 }
 
 impl StdConfig for AuraConfig {
@@ -54,24 +64,29 @@ impl AuraConfig {
         let support_data = LedSupportData::get_data(prod_id);
         let enabled = LaptopAuraPower::new(device_type, &support_data);
         let mut config = AuraConfig {
+            led_type: device_type,
+            support_data,
             config_name: format!("aura_{prod_id}.ron"),
+            ally_fix: None,
             brightness: LedBrightness::Med,
             current_mode: AuraModeNum::Static,
             builtins: BTreeMap::new(),
             multizone: None,
             multizone_on: false,
             enabled,
+            per_key_mode_active: false,
         };
 
-        for n in &support_data.basic_modes {
+        for n in &config.support_data.basic_modes {
             debug!("creating default for {n}");
             config
                 .builtins
                 .insert(*n, AuraEffect::default_with_mode(*n));
-
-            if !support_data.basic_zones.is_empty() {
+        }
+        if !config.support_data.basic_zones.is_empty() {
+            for n in &config.support_data.basic_modes {
                 let mut default = vec![];
-                for (i, tmp) in support_data.basic_zones.iter().enumerate() {
+                for (i, tmp) in config.support_data.basic_zones.iter().enumerate() {
                     default.push(AuraEffect {
                         mode: *n,
                         zone: *tmp,
@@ -104,14 +119,14 @@ impl AuraConfig {
             self.multizone_on = false;
         } else {
             if let Some(multi) = self.multizone.as_mut() {
-                if let Some(fx) = multi.get_mut(effect.mode()) {
-                    for fx in fx.iter_mut() {
+                if let Some(fx_vec) = multi.get_mut(effect.mode()) {
+                    for fx in fx_vec.iter_mut() {
                         if fx.zone == effect.zone {
                             *fx = effect;
                             return;
                         }
                     }
-                    fx.push(effect);
+                    fx_vec.push(effect);
                 } else {
                     multi.insert(*effect.mode(), vec![effect]);
                 }
@@ -130,16 +145,116 @@ impl AuraConfig {
         }
         None
     }
+
+    /// Create a default for the `current_mode` if multizone and no config
+    /// exists.
+    pub fn create_multizone_default(&mut self) -> Result<(), RogError> {
+        let mut default = vec![];
+        for (i, tmp) in self.support_data.basic_zones.iter().enumerate() {
+            default.push(AuraEffect {
+                mode: self.current_mode,
+                zone: *tmp,
+                colour1: *GRADIENT.get(i).unwrap_or(&GRADIENT[0]),
+                colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
+                speed: Speed::Med,
+                direction: Direction::Left,
+            });
+        }
+        if default.is_empty() {
+            return Err(RogError::AuraEffectNotSupported);
+        }
+
+        if let Some(multizones) = self.multizone.as_mut() {
+            multizones.insert(self.current_mode, default);
+        } else {
+            let mut tmp = BTreeMap::new();
+            tmp.insert(self.current_mode, default);
+            self.multizone = Some(tmp);
+        }
+        Ok(())
+    }
+
+    /// Reload the config from disk then verify and update it if required.
+    /// Always rewrites the file to disk.
+    pub fn load_and_update_config(prod_id: &str) -> AuraConfig {
+        // New loads data from the DB also
+        let mut config_init = AuraConfig::new(prod_id);
+        // config_init.set_filename(prod_id);
+        let mut config_loaded = config_init.clone().load();
+        // update the initialised data with what we loaded from disk
+        for mode_init in &mut config_init.builtins {
+            // update init values from loaded values if they exist
+            if let Some(loaded) = config_loaded.builtins.get(mode_init.0) {
+                *mode_init.1 = loaded.clone();
+            }
+        }
+        // Then replace just incase the initialised data contains new modes added
+        config_loaded.builtins = config_init.builtins;
+        config_loaded.support_data = config_init.support_data;
+        config_loaded.led_type = config_init.led_type;
+        config_loaded.ally_fix = config_init.ally_fix;
+
+        for enabled_init in &mut config_init.enabled.states {
+            for enabled in &mut config_loaded.enabled.states {
+                if enabled.zone == enabled_init.zone {
+                    *enabled_init = *enabled;
+                    break;
+                }
+            }
+        }
+        config_loaded.enabled = config_init.enabled;
+
+        if let (Some(mut multizone_init), Some(multizone_loaded)) =
+            (config_init.multizone, config_loaded.multizone.as_mut())
+        {
+            for mode in multizone_init.iter_mut() {
+                // update init values from loaded values if they exist
+                if let Some(loaded) = multizone_loaded.get(mode.0) {
+                    let mut new_set = Vec::new();
+                    let data = LedSupportData::get_data(prod_id);
+                    // only reuse a zone mode if the mode is supported
+                    for mode in loaded {
+                        if data.basic_modes.contains(&mode.mode) {
+                            new_set.push(mode.clone());
+                        }
+                    }
+                    *mode.1 = new_set;
+                }
+            }
+            *multizone_loaded = multizone_init;
+        }
+
+        config_loaded.write();
+        config_loaded
+    }
 }
 
 #[cfg(test)]
 mod tests {
-    use rog_aura::{AuraEffect, AuraModeNum, AuraZone, Colour};
+    use std::sync::{Mutex, MutexGuard, OnceLock};
+
+    use rog_aura::keyboard::AuraPowerState;
+    use rog_aura::{
+        AuraEffect, AuraModeNum, AuraZone, Colour, Direction, LedBrightness, PowerZones, Speed,
+    };
 
     use super::AuraConfig;
 
+    // Global mutex to serialize tests that rely on process-wide environment
+    // variables
+    static TEST_MUTEX: OnceLock<Mutex<()>> = OnceLock::new();
+
+    fn test_lock() -> MutexGuard<'static, ()> {
+        TEST_MUTEX
+            .get_or_init(|| Mutex::new(()))
+            .lock()
+            .expect("TEST_MUTEX poisoned")
+    }
+
     #[test]
     fn set_multizone_4key_config() {
+        let _guard = test_lock();
+        std::env::set_var("BOARD_NAME", "");
         let mut config = AuraConfig::new("19b6");
 
         let effect = AuraEffect {
@@ -230,6 +345,8 @@ mod tests {
 
     #[test]
     fn set_multizone_multimode_config() {
+        let _guard = test_lock();
+        std::env::set_var("BOARD_NAME", "");
         let mut config = AuraConfig::new("19b6");
 
         let effect = AuraEffect {
@@ -274,4 +391,68 @@ mod tests {
         let sta = res.get(&AuraModeNum::Pulse).unwrap();
         assert_eq!(sta.len(), 1);
     }
+
+    #[test]
+    fn verify_0x1866_g531i() {
+        let _guard = test_lock();
+        std::env::set_var("BOARD_NAME", "G513I");
+        let mut config = AuraConfig::new("1866");
+
+        assert_eq!(config.brightness, LedBrightness::Med);
+        assert_eq!(config.builtins.len(), 5);
+        assert_eq!(
+            config.builtins.first_entry().unwrap().get(),
+            &AuraEffect {
+                mode: AuraModeNum::Static,
+                zone: AuraZone::None,
+                colour1: Colour { r: 166, g: 0, b: 0 },
+                colour2: Colour { r: 0, g: 0, b: 0 },
+                speed: Speed::Med,
+                direction: Direction::Right
+            }
+        );
+        assert_eq!(config.enabled.states.len(), 1);
+        assert_eq!(
+            config.enabled.states[0],
+            AuraPowerState {
+                zone: PowerZones::KeyboardAndLightbar,
+                boot: true,
+                awake: true,
+                sleep: true,
+                shutdown: true
+            }
+        );
+    }
+
+    #[test]
+    fn verify_0x19b6_g634j() {
+        let _guard = test_lock();
+        std::env::set_var("BOARD_NAME", "G634J");
+        let mut config = AuraConfig::new("19b6");
+
+        assert_eq!(config.brightness, LedBrightness::Med);
+        assert_eq!(config.builtins.len(), 12);
+        assert_eq!(
+            config.builtins.first_entry().unwrap().get(),
+            &AuraEffect {
+                mode: AuraModeNum::Static,
+                zone: AuraZone::None,
+                colour1: Colour { r: 166, g: 0, b: 0 },
+                colour2: Colour { r: 0, g: 0, b: 0 },
+                speed: Speed::Med,
+                direction: Direction::Right
+            }
+        );
+        assert_eq!(config.enabled.states.len(), 4);
+        assert_eq!(
+            config.enabled.states[0],
+            AuraPowerState {
+                zone: PowerZones::Keyboard,
+                boot: true,
+                awake: true,
+                sleep: true,
+                shutdown: true
+            }
+        );
+    }
 }

asusd/src/aura_laptop/mod.rs

@@ -0,0 +1,229 @@
+use std::sync::Arc;
+
+use config::AuraConfig;
+use config_traits::StdConfig;
+use log::info;
+use rog_aura::keyboard::{AuraLaptopUsbPackets, LedUsbPackets};
+use rog_aura::usb::{AURA_LAPTOP_LED_APPLY, AURA_LAPTOP_LED_SET};
+use rog_aura::{AuraDeviceType, AuraEffect, LedBrightness, PowerZones, AURA_LAPTOP_LED_MSG_LEN};
+use rog_platform::hid_raw::HidRaw;
+use rog_platform::keyboard_led::KeyboardBacklight;
+use tokio::sync::{Mutex, MutexGuard};
+
+use crate::error::RogError;
+
+pub mod config;
+pub mod trait_impls;
+
+#[derive(Debug, Clone)]
+pub struct Aura {
+    pub hid: Option<Arc<Mutex<HidRaw>>>,
+    pub backlight: Option<Arc<Mutex<KeyboardBacklight>>>,
+    pub config: Arc<Mutex<AuraConfig>>,
+}
+
+impl Aura {
+    /// Initialise the device if required.
+    pub async fn do_initialization(&self) -> Result<(), RogError> {
+        Ok(())
+    }
+
+    pub async fn lock_config(&self) -> MutexGuard<'_, AuraConfig> {
+        self.config.lock().await
+    }
+
+    /// Will lock the internal config and update. If anything else has locked
+    /// this in scope then a deadlock can occur.
+    pub async fn update_config(&self) -> Result<(), RogError> {
+        let mut config = self.config.lock().await;
+        let bright = if let Some(bl) = self.backlight.as_ref() {
+            bl.lock().await.get_brightness().unwrap_or_default()
+        } else {
+            config.brightness.into()
+        };
+        config.read();
+        config.brightness = bright.into();
+        config.write();
+        Ok(())
+    }
+
+    pub async fn write_current_config_mode(&self, config: &mut AuraConfig) -> Result<(), RogError> {
+        if config.multizone_on {
+            let mode = config.current_mode;
+            let mut create = false;
+            // There is no multizone config for this mode so create one here
+            // using the colours of rainbow if it exists, or first available
+            // mode, or random
+            if config.multizone.is_none() {
+                create = true;
+            } else if let Some(multizones) = config.multizone.as_ref() {
+                if !multizones.contains_key(&mode) {
+                    create = true;
+                }
+            }
+            if create {
+                info!("No user-set config for zone founding, attempting a default");
+                config.create_multizone_default()?;
+            }
+
+            if let Some(multizones) = config.multizone.as_mut() {
+                if let Some(set) = multizones.get(&mode) {
+                    for mode in set.clone() {
+                        self.write_effect_and_apply(config.led_type, &mode).await?;
+                    }
+                }
+            }
+        } else {
+            let mode = config.current_mode;
+            if let Some(effect) = config.builtins.get(&mode).cloned() {
+                self.write_effect_and_apply(config.led_type, &effect)
+                    .await?;
+            }
+        }
+
+        Ok(())
+    }
+
+    /// Write the AuraEffect to the device. Will lock `backlight` or `hid`.
+    ///
+    /// If per-key or software-mode is active it must be marked as disabled in
+    /// config.
+    pub async fn write_effect_and_apply(
+        &self,
+        dev_type: AuraDeviceType,
+        mode: &AuraEffect,
+    ) -> Result<(), RogError> {
+        if matches!(dev_type, AuraDeviceType::LaptopKeyboardTuf) {
+            if let Some(platform) = &self.backlight {
+                let buf = [
+                    1, mode.mode as u8, mode.colour1.r, mode.colour1.g, mode.colour1.b,
+                    mode.speed as u8,
+                ];
+                platform.lock().await.set_kbd_rgb_mode(&buf)?;
+            }
+        } else if let Some(hid_raw) = &self.hid {
+            let bytes: [u8; AURA_LAPTOP_LED_MSG_LEN] = mode.into();
+            let hid_raw = hid_raw.lock().await;
+            hid_raw.write_bytes(&bytes)?;
+            hid_raw.write_bytes(&AURA_LAPTOP_LED_SET)?;
+            // Changes won't persist unless apply is set
+            hid_raw.write_bytes(&AURA_LAPTOP_LED_APPLY)?;
+        } else {
+            return Err(RogError::NoAuraKeyboard);
+        }
+
+        Ok(())
+    }
+
+    pub async fn set_brightness(&self, value: u8) -> Result<(), RogError> {
+        if let Some(backlight) = &self.backlight {
+            backlight.lock().await.set_brightness(value)?;
+            return Ok(());
+        }
+        Err(RogError::MissingFunction(
+            "No LED backlight control available".to_string(),
+        ))
+    }
+
+    /// Set combination state for boot animation/sleep animation/all leds/keys
+    /// leds/side leds LED active
+    pub async fn set_power_states(&self, config: &AuraConfig) -> Result<(), RogError> {
+        if matches!(config.led_type, rog_aura::AuraDeviceType::LaptopKeyboardTuf) {
+            if let Some(backlight) = &self.backlight {
+                // TODO: tuf bool array
+                let buf = config.enabled.to_bytes(config.led_type);
+                backlight.lock().await.set_kbd_rgb_state(&buf)?;
+            }
+        } else if let Some(hid_raw) = &self.hid {
+            let hid_raw = hid_raw.lock().await;
+            if let Some(p) = config.enabled.states.first() {
+                if p.zone == PowerZones::Ally {
+                    let msg = [
+                        0x5d,
+                        0xd1,
+                        0x09,
+                        0x01,
+                        p.new_to_byte() as u8,
+                        0x0,
+                        0x0,
+                    ];
+                    hid_raw.write_bytes(&msg)?;
+                    return Ok(());
+                }
+            }
+
+            let bytes = config.enabled.to_bytes(config.led_type);
+            let msg = [
+                0x5d, 0xbd, 0x01, bytes[0], bytes[1], bytes[2], bytes[3],
+            ];
+            hid_raw.write_bytes(&msg)?;
+        }
+        Ok(())
+    }
+
+    /// Write an effect block. This is for per-key, but can be repurposed to
+    /// write the raw factory mode packets - when doing this it is expected that
+    /// only the first `Vec` (`effect[0]`) is valid.
+    pub async fn write_effect_block(
+        &self,
+        config: &mut AuraConfig,
+        effect: &AuraLaptopUsbPackets,
+    ) -> Result<(), RogError> {
+        if config.brightness == LedBrightness::Off {
+            config.brightness = LedBrightness::Med;
+            config.write();
+        }
+
+        let pkt_type = effect[0][1];
+        const PER_KEY_TYPE: u8 = 0xbc;
+
+        if let Some(hid_raw) = &self.hid {
+            let hid_raw = hid_raw.lock().await;
+            if pkt_type != PER_KEY_TYPE {
+                config.per_key_mode_active = false;
+                hid_raw.write_bytes(&effect[0])?;
+                hid_raw.write_bytes(&AURA_LAPTOP_LED_SET)?;
+                // hid_raw.write_bytes(&LED_APPLY)?;
+            } else {
+                if !config.per_key_mode_active {
+                    let init = LedUsbPackets::get_init_msg();
+                    hid_raw.write_bytes(&init)?;
+                    config.per_key_mode_active = true;
+                }
+                for row in effect.iter() {
+                    hid_raw.write_bytes(row)?;
+                }
+            }
+        } else if matches!(config.led_type, rog_aura::AuraDeviceType::LaptopKeyboardTuf) {
+            if let Some(tuf) = &self.backlight {
+                for row in effect.iter() {
+                    let r = row[9];
+                    let g = row[10];
+                    let b = row[11];
+                    tuf.lock().await.set_kbd_rgb_mode(&[
+                        0, 0, r, g, b, 0,
+                    ])?;
+                }
+            }
+        }
+        Ok(())
+    }
+
+    pub async fn fix_ally_power(&mut self) -> Result<(), RogError> {
+        if self.config.lock().await.led_type == AuraDeviceType::Ally {
+            if let Some(hid_raw) = &self.hid {
+                let mut config = self.config.lock().await;
+                if config.ally_fix.is_none() {
+                    let msg = [
+                        0x5d, 0xbd, 0x01, 0xff, 0xff, 0xff, 0xff,
+                    ];
+                    hid_raw.lock().await.write_bytes(&msg)?;
+                    info!("Reset Ally power settings to base");
+                    config.ally_fix = Some(true);
+                }
+                config.write();
+            }
+        }
+        Ok(())
+    }
+}

asusd/src/aura_laptop/trait_impls.rs

@@ -0,0 +1,349 @@
+use std::collections::BTreeMap;
+
+use config_traits::StdConfig;
+use log::{debug, error, info, warn};
+use rog_aura::keyboard::{AuraLaptopUsbPackets, LaptopAuraPower};
+use rog_aura::{AuraDeviceType, AuraEffect, AuraModeNum, AuraZone, LedBrightness, PowerZones};
+use zbus::fdo::Error as ZbErr;
+use zbus::object_server::SignalEmitter;
+use zbus::zvariant::OwnedObjectPath;
+use zbus::{interface, Connection};
+
+use super::Aura;
+use crate::error::RogError;
+use crate::{CtrlTask, Reloadable};
+
+pub const AURA_ZBUS_NAME: &str = "Aura";
+pub const AURA_ZBUS_PATH: &str = "/xyz/ljones";
+
+#[derive(Clone)]
+pub struct AuraZbus(Aura);
+
+impl AuraZbus {
+    pub fn new(aura: Aura) -> Self {
+        Self(aura)
+    }
+
+    pub async fn start_tasks(
+        mut self,
+        connection: &Connection,
+        // _signal_ctx: SignalEmitter<'static>,
+        path: OwnedObjectPath,
+    ) -> Result<(), RogError> {
+        // let task = zbus.clone();
+        // let signal_ctx = signal_ctx.clone();
+        self.reload()
+            .await
+            .unwrap_or_else(|err| warn!("Controller error: {}", err));
+        connection
+            .object_server()
+            .at(path.clone(), self)
+            .await
+            .map_err(|e| error!("Couldn't add server at path: {path}, {e:?}"))
+            .ok();
+        // TODO: skip this until we keep handles to tasks so they can be killed
+        // task.create_tasks(signal_ctx).await
+        Ok(())
+    }
+}
+
+/// The main interface for changing, reading, or notfying
+///
+/// LED commands are split between Brightness, Modes, Per-Key
+#[interface(name = "xyz.ljones.Aura")]
+impl AuraZbus {
+    /// Return the device type for this Aura keyboard
+    #[zbus(property)]
+    async fn device_type(&self) -> AuraDeviceType {
+        self.0.config.lock().await.led_type
+    }
+
+    /// Return the current LED brightness
+    #[zbus(property)]
+    async fn brightness(&self) -> Result<LedBrightness, ZbErr> {
+        if let Some(bl) = self.0.backlight.as_ref() {
+            return Ok(bl.lock().await.get_brightness().map(|n| n.into())?);
+        }
+        Err(ZbErr::Failed("No sysfs brightness control".to_string()))
+    }
+
+    /// Set the keyboard brightness level (0-3)
+    #[zbus(property)]
+    async fn set_brightness(&mut self, brightness: LedBrightness) -> Result<(), ZbErr> {
+        if let Some(bl) = self.0.backlight.as_ref() {
+            let res = bl.lock().await.set_brightness(brightness.into());
+            if res.is_ok() {
+                let mut config = self.0.config.lock().await;
+                config.brightness = brightness;
+                config.write();
+            }
+            return Ok(res?);
+        }
+        Err(ZbErr::Failed("No sysfs brightness control".to_string()))
+    }
+
+    /// Total levels of brightness available
+    #[zbus(property)]
+    async fn supported_brightness(&self) -> Vec<LedBrightness> {
+        vec![
+            LedBrightness::Off,
+            LedBrightness::Low,
+            LedBrightness::Med,
+            LedBrightness::High,
+        ]
+    }
+
+    /// The total available modes
+    #[zbus(property)]
+    async fn supported_basic_modes(&self) -> Result<Vec<AuraModeNum>, ZbErr> {
+        let config = self.0.config.lock().await;
+        Ok(config.builtins.keys().cloned().collect())
+    }
+
+    #[zbus(property)]
+    async fn supported_basic_zones(&self) -> Result<Vec<AuraZone>, ZbErr> {
+        let config = self.0.config.lock().await;
+        Ok(config.support_data.basic_zones.clone())
+    }
+
+    #[zbus(property)]
+    async fn supported_power_zones(&self) -> Result<Vec<PowerZones>, ZbErr> {
+        let config = self.0.config.lock().await;
+        Ok(config.support_data.power_zones.clone())
+    }
+
+    /// The current mode data
+    #[zbus(property)]
+    async fn led_mode(&self) -> Result<AuraModeNum, ZbErr> {
+        // entirely possible to deadlock here, so use try instead of lock()
+        // let ctrl = self.0.lock().await;
+        // Ok(config.current_mode)
+        if let Ok(config) = self.0.config.try_lock() {
+            Ok(config.current_mode)
+        } else {
+            Err(ZbErr::Failed("Aura control couldn't lock self".to_string()))
+        }
+    }
+
+    /// Set an Aura effect if the effect mode or zone is supported.
+    ///
+    /// On success the aura config file is read to refresh cached values, then
+    /// the effect is stored and config written to disk.
+    #[zbus(property)]
+    async fn set_led_mode(&mut self, num: AuraModeNum) -> Result<(), ZbErr> {
+        let mut config = self.0.config.lock().await;
+        config.current_mode = num;
+        self.0.write_current_config_mode(&mut config).await?;
+        if config.brightness == LedBrightness::Off {
+            config.brightness = LedBrightness::Med;
+        }
+        self.0.set_brightness(config.brightness.into()).await?;
+        config.write();
+        Ok(())
+    }
+
+    /// The current mode data
+    #[zbus(property)]
+    async fn led_mode_data(&self) -> Result<AuraEffect, ZbErr> {
+        // entirely possible to deadlock here, so use try instead of lock()
+        if let Ok(config) = self.0.config.try_lock() {
+            let mode = config.current_mode;
+            match config.builtins.get(&mode) {
+                Some(effect) => Ok(effect.clone()),
+                None => Err(ZbErr::Failed("Could not get the current effect".into())),
+            }
+        } else {
+            Err(ZbErr::Failed("Aura control couldn't lock self".to_string()))
+        }
+    }
+
+    /// Set an Aura effect if the effect mode or zone is supported.
+    ///
+    /// On success the aura config file is read to refresh cached values, then
+    /// the effect is stored and config written to disk.
+    #[zbus(property)]
+    async fn set_led_mode_data(&mut self, effect: AuraEffect) -> Result<(), ZbErr> {
+        let mut config = self.0.config.lock().await;
+        if !config.support_data.basic_modes.contains(&effect.mode)
+            || effect.zone != AuraZone::None
+                && !config.support_data.basic_zones.contains(&effect.zone)
+        {
+            return Err(ZbErr::NotSupported(format!(
+                "The Aura effect is not supported: {effect:?}"
+            )));
+        }
+
+        self.0
+            .write_effect_and_apply(config.led_type, &effect)
+            .await?;
+        if config.brightness == LedBrightness::Off {
+            config.brightness = LedBrightness::Med;
+        }
+        self.0.set_brightness(config.brightness.into()).await?;
+        config.set_builtin(effect);
+        config.write();
+
+        Ok(())
+    }
+
+    /// Get the data set for every mode available
+    async fn all_mode_data(&self) -> BTreeMap<AuraModeNum, AuraEffect> {
+        let config = self.0.config.lock().await;
+        config.builtins.clone()
+    }
+
+    // As property doesn't work for AuraPowerDev (complexity of serialization?)
+    #[zbus(property)]
+    async fn led_power(&self) -> LaptopAuraPower {
+        let config = self.0.config.lock().await;
+        config.enabled.clone()
+    }
+
+    /// Set a variety of states, input is array of enum.
+    /// `enabled` sets if the sent array should be disabled or enabled
+    ///
+    /// For Modern ROG devices the "enabled" flag is ignored.
+    #[zbus(property)]
+    async fn set_led_power(&mut self, options: LaptopAuraPower) -> Result<(), ZbErr> {
+        let mut config = self.0.config.lock().await;
+        for opt in options.states {
+            let zone = opt.zone;
+            for config in config.enabled.states.iter_mut() {
+                if config.zone == zone {
+                    *config = opt;
+                }
+            }
+        }
+        config.write();
+        Ok(self.0.set_power_states(&config).await.map_err(|e| {
+            warn!("{}", e);
+            e
+        })?)
+    }
+
+    /// On machine that have some form of either per-key keyboard or per-zone
+    /// this can be used to write custom effects over dbus. The input is a
+    /// nested `Vec<Vec<8>>` where `Vec<u8>` is a raw USB packet
+    async fn direct_addressing_raw(&self, data: AuraLaptopUsbPackets) -> Result<(), ZbErr> {
+        let mut config = self.0.config.lock().await;
+        self.0.write_effect_block(&mut config, &data).await?;
+        Ok(())
+    }
+}
+
+impl CtrlTask for AuraZbus {
+    fn zbus_path() -> &'static str {
+        "/xyz/ljones"
+    }
+
+    async fn create_tasks(&self, _: SignalEmitter<'static>) -> Result<(), RogError> {
+        let inner1 = self.0.clone();
+        let inner3 = self.0.clone();
+        self.create_sys_event_tasks(
+            move |sleeping| {
+                let inner1 = inner1.clone();
+                // unwrap as we want to bomb out of the task
+                async move {
+                    if !sleeping {
+                        info!("CtrlKbdLedTask reloading brightness and modes");
+                        if let Some(backlight) = &inner1.backlight {
+                            backlight
+                                .lock()
+                                .await
+                                .set_brightness(inner1.config.lock().await.brightness.into())
+                                .map_err(|e| {
+                                    error!("CtrlKbdLedTask: {e}");
+                                    e
+                                })
+                                .unwrap();
+                        }
+                        let mut config = inner1.config.lock().await;
+                        inner1
+                            .write_current_config_mode(&mut config)
+                            .await
+                            .map_err(|e| {
+                                error!("CtrlKbdLedTask: {e}");
+                                e
+                            })
+                            .unwrap();
+                    } else if sleeping {
+                        inner1
+                            .update_config()
+                            .await
+                            .map_err(|e| {
+                                error!("CtrlKbdLedTask: {e}");
+                                e
+                            })
+                            .unwrap();
+                    }
+                }
+            },
+            move |_shutting_down| {
+                let inner3 = inner3.clone();
+                async move {
+                    info!("CtrlKbdLedTask reloading brightness and modes");
+                    if let Some(backlight) = &inner3.backlight {
+                        // unwrap as we want to bomb out of the task
+                        backlight
+                            .lock()
+                            .await
+                            .set_brightness(inner3.config.lock().await.brightness.into())
+                            .map_err(|e| {
+                                error!("CtrlKbdLedTask: {e}");
+                                e
+                            })
+                            .unwrap();
+                    }
+                }
+            },
+            move |_lid_closed| {
+                // on lid change
+                async move {}
+            },
+            move |_power_plugged| {
+                // power change
+                async move {}
+            },
+        )
+        .await;
+
+        // let ctrl2 = self.0.clone();
+        // let ctrl = self.0.lock().await;
+        // if ctrl.led_node.has_brightness_control() {
+        //     let watch = ctrl.led_node.monitor_brightness()?;
+        //     tokio::spawn(async move {
+        //         let mut buffer = [0; 32];
+        //         watch
+        //             .into_event_stream(&mut buffer)
+        //             .unwrap()
+        //             .for_each(|_| async {
+        //                 if let Some(lock) = ctrl2.try_lock() {
+        //                     load_save(true, lock).unwrap(); // unwrap as we want
+        //                                                     // to
+        //                                                     // bomb out of the
+        //                                                     // task
+        //                 }
+        //             })
+        //             .await;
+        //     });
+        // }
+
+        Ok(())
+    }
+}
+
+impl Reloadable for AuraZbus {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        self.0.fix_ally_power().await?;
+        debug!("reloading keyboard mode");
+        let mut config = self.0.lock_config().await;
+        self.0.write_current_config_mode(&mut config).await?;
+        debug!("reloading power states");
+        self.0
+            .set_power_states(&config)
+            .await
+            .map_err(|err| warn!("{err}"))
+            .ok();
+        Ok(())
+    }
+}

asusd/src/aura_manager.rs

@@ -0,0 +1,592 @@
+// Plan:
+// - Manager has udev monitor on USB looking for ROG devices
+// - If a device is found, add it to watch
+// - Add it to Zbus server
+// - If udev sees device removed then remove the zbus path
+
+use std::collections::HashMap;
+use std::sync::Arc;
+
+use dmi_id::DMIID;
+use futures_lite::future::block_on;
+use log::{debug, error, info, warn};
+use mio::{Events, Interest, Poll, Token};
+use rog_platform::error::PlatformError;
+use rog_platform::hid_raw::HidRaw;
+use tokio::sync::Mutex;
+use udev::{Device, MonitorBuilder};
+use zbus::zvariant::{ObjectPath, OwnedObjectPath};
+use zbus::Connection;
+
+use crate::aura_anime::trait_impls::AniMeZbus;
+use crate::aura_laptop::trait_impls::AuraZbus;
+use crate::aura_scsi::trait_impls::ScsiZbus;
+use crate::aura_slash::trait_impls::SlashZbus;
+use crate::aura_types::DeviceHandle;
+use crate::error::RogError;
+use crate::ASUS_ZBUS_PATH;
+
+const MOD_NAME: &str = "aura";
+
+/// Returns only the Device details concatenated in a form usable for
+/// adding/appending to a filename
+pub fn filename_partial(parent: &Device) -> Option<OwnedObjectPath> {
+    if let Some(id_product) = parent.attribute_value("idProduct") {
+        let id_product = id_product.to_string_lossy();
+        let mut path = if let Some(devnum) = parent.attribute_value("devnum") {
+            let devnum = devnum.to_string_lossy();
+            if let Some(devpath) = parent.attribute_value("devpath") {
+                let devpath = devpath.to_string_lossy();
+                format!("{id_product}_{devnum}_{devpath}")
+            } else {
+                format!("{id_product}_{devnum}")
+            }
+        } else {
+            format!("{id_product}")
+        };
+        if path.contains('.') {
+            warn!("dbus path for {id_product} contains `.`, removing");
+            path.replace('.', "").clone_into(&mut path);
+        }
+        return Some(ObjectPath::from_str_unchecked(&path).into());
+    }
+    None
+}
+
+fn dbus_path_for_dev(parent: &Device) -> Option<OwnedObjectPath> {
+    if let Some(filename) = filename_partial(parent) {
+        return Some(
+            ObjectPath::from_str_unchecked(&format!("{ASUS_ZBUS_PATH}/{MOD_NAME}/{filename}"))
+                .into(),
+        );
+    }
+    None
+}
+
+fn dbus_path_for_tuf() -> OwnedObjectPath {
+    ObjectPath::from_str_unchecked(&format!("{ASUS_ZBUS_PATH}/{MOD_NAME}/tuf")).into()
+}
+
+fn dbus_path_for_slash() -> OwnedObjectPath {
+    ObjectPath::from_str_unchecked(&format!("{ASUS_ZBUS_PATH}/{MOD_NAME}/slash")).into()
+}
+
+fn dbus_path_for_anime() -> OwnedObjectPath {
+    ObjectPath::from_str_unchecked(&format!("{ASUS_ZBUS_PATH}/{MOD_NAME}/anime")).into()
+}
+
+fn dbus_path_for_scsi(prod_id: &str) -> OwnedObjectPath {
+    ObjectPath::from_str_unchecked(&format!("{ASUS_ZBUS_PATH}/{MOD_NAME}/{prod_id}_scsi")).into()
+}
+
+fn dev_prop_matches(dev: &Device, prop: &str, value: &str) -> bool {
+    if let Some(p) = dev.property_value(prop) {
+        return p == value;
+    }
+    false
+}
+
+/// A device.
+///
+/// Each controller within should track its dbus path so it can be removed if
+/// required.
+pub struct AsusDevice {
+    device: DeviceHandle,
+    dbus_path: OwnedObjectPath,
+    hid_key: Option<String>,
+}
+
+pub struct DeviceManager {
+    _dbus_connection: Connection,
+    _hid_handles: Arc<Mutex<HashMap<String, Arc<Mutex<HidRaw>>>>>,
+}
+
+impl DeviceManager {
+    #[allow(clippy::type_complexity)]
+    async fn get_or_create_hid_handle(
+        handles: &Arc<Mutex<HashMap<String, Arc<Mutex<HidRaw>>>>>,
+        endpoint: &Device,
+    ) -> Result<(Arc<Mutex<HidRaw>>, String), RogError> {
+        let dev_node = endpoint
+            .devnode()
+            .ok_or_else(|| RogError::MissingFunction("hidraw devnode missing".to_string()))?;
+        let key = dev_node.to_string_lossy().to_string();
+
+        if let Some(existing) = handles.lock().await.get(&key).cloned() {
+            return Ok((existing, key));
+        }
+
+        let hidraw = HidRaw::from_device(endpoint.clone())?;
+        let handle = Arc::new(Mutex::new(hidraw));
+        handles.lock().await.insert(key.clone(), handle.clone());
+        Ok((handle, key))
+    }
+
+    async fn init_hid_devices(
+        connection: &Connection,
+        device: Device,
+        handles: Arc<Mutex<HashMap<String, Arc<Mutex<HidRaw>>>>>,
+    ) -> Result<Vec<AsusDevice>, RogError> {
+        let mut devices = Vec::new();
+        if let Some(usb_device) = device.parent_with_subsystem_devtype("usb", "usb_device")? {
+            if let Some(usb_id) = usb_device.attribute_value("idProduct") {
+                if let Some(vendor_id) = usb_device.attribute_value("idVendor") {
+                    if vendor_id != "0b05" {
+                        debug!("Not ASUS vendor ID: {}", vendor_id.to_string_lossy());
+                        return Ok(devices);
+                    }
+                    // Almost all devices are identified by the productId.
+                    // So let's see what we have and:
+                    // 1. Generate an interface path
+                    // 2. Create the device
+                    // Use the top-level endpoint, not the parent
+                    if let Ok((dev, hid_key)) =
+                        Self::get_or_create_hid_handle(&handles, &device).await
+                    {
+                        debug!("Testing device {usb_id:?}");
+                        // SLASH DEVICE
+                        if let Ok(dev_type) = DeviceHandle::new_slash_hid(
+                            dev.clone(),
+                            usb_id.to_str().unwrap_or_default(),
+                        )
+                        .await
+                        {
+                            if let DeviceHandle::Slash(slash) = dev_type.clone() {
+                                let path =
+                                    dbus_path_for_dev(&usb_device).unwrap_or(dbus_path_for_slash());
+                                let ctrl = SlashZbus::new(slash);
+                                ctrl.start_tasks(connection, path.clone()).await.unwrap();
+                                devices.push(AsusDevice {
+                                    device: dev_type,
+                                    dbus_path: path,
+                                    hid_key: Some(hid_key.clone()),
+                                });
+                            }
+                        }
+                        // ANIME MATRIX DEVICE
+                        if let Ok(dev_type) = DeviceHandle::maybe_anime_hid(
+                            dev.clone(),
+                            usb_id.to_str().unwrap_or_default(),
+                        )
+                        .await
+                        {
+                            if let DeviceHandle::AniMe(anime) = dev_type.clone() {
+                                let path =
+                                    dbus_path_for_dev(&usb_device).unwrap_or(dbus_path_for_anime());
+                                let ctrl = AniMeZbus::new(anime);
+                                ctrl.start_tasks(connection, path.clone()).await.unwrap();
+                                devices.push(AsusDevice {
+                                    device: dev_type,
+                                    dbus_path: path,
+                                    hid_key: Some(hid_key.clone()),
+                                });
+                            }
+                        }
+                        // AURA LAPTOP DEVICE
+                        if let Ok(dev_type) = DeviceHandle::maybe_laptop_aura(
+                            Some(dev),
+                            usb_id.to_str().unwrap_or_default(),
+                        )
+                        .await
+                        {
+                            if let DeviceHandle::Aura(aura) = dev_type.clone() {
+                                let path =
+                                    dbus_path_for_dev(&usb_device).unwrap_or(dbus_path_for_tuf());
+                                let ctrl = AuraZbus::new(aura);
+                                ctrl.start_tasks(connection, path.clone()).await.unwrap();
+                                devices.push(AsusDevice {
+                                    device: dev_type,
+                                    dbus_path: path,
+                                    hid_key: Some(hid_key),
+                                });
+                            }
+                        }
+                    } else {
+                        warn!("Failed to initialise shared hid handle for {usb_id:?}");
+                    }
+                }
+            }
+        }
+        Ok(devices)
+    }
+
+    /// To be called on daemon startup
+    async fn init_all_hid(
+        connection: &Connection,
+        handles: Arc<Mutex<HashMap<String, Arc<Mutex<HidRaw>>>>>,
+    ) -> Result<Vec<AsusDevice>, RogError> {
+        // track and ensure we use only one hidraw per prod_id
+        // let mut interfaces = HashSet::new();
+        let mut devices: Vec<AsusDevice> = Vec::new();
+
+        let mut enumerator = udev::Enumerator::new().map_err(|err| {
+            warn!("{}", err);
+            PlatformError::Udev("enumerator failed".into(), err)
+        })?;
+
+        enumerator.match_subsystem("hidraw").map_err(|err| {
+            warn!("{}", err);
+            PlatformError::Udev("match_subsystem failed".into(), err)
+        })?;
+
+        for device in enumerator
+            .scan_devices()
+            .map_err(|e| PlatformError::IoPath("enumerator".to_owned(), e))?
+        {
+            devices.append(&mut Self::init_hid_devices(connection, device, handles.clone()).await?);
+        }
+
+        Ok(devices)
+    }
+
+    async fn init_scsi(
+        connection: &Connection,
+        device: &Device,
+        path: OwnedObjectPath,
+    ) -> Option<AsusDevice> {
+        // "ID_MODEL_ID" "1932"
+        // "ID_VENDOR_ID" "0b05"
+        if dev_prop_matches(device, "ID_VENDOR_ID", "0b05") {
+            if let Some(dev_node) = device.devnode() {
+                let prod_id = device
+                    .property_value("ID_MODEL_ID")
+                    .unwrap_or_default()
+                    .to_string_lossy();
+                if let Ok(dev_type) =
+                    DeviceHandle::maybe_scsi(dev_node.as_os_str().to_str().unwrap(), &prod_id).await
+                {
+                    if let DeviceHandle::Scsi(scsi) = dev_type.clone() {
+                        let ctrl = ScsiZbus::new(scsi);
+                        ctrl.start_tasks(connection, path.clone()).await.unwrap();
+                        return Some(AsusDevice {
+                            device: dev_type,
+                            dbus_path: path,
+                            hid_key: None,
+                        });
+                    }
+                }
+            }
+        }
+        None
+    }
+
+    async fn init_all_scsi(connection: &Connection) -> Result<Vec<AsusDevice>, RogError> {
+        // track and ensure we use only one hidraw per prod_id
+        // let mut interfaces = HashSet::new();
+        let mut devices: Vec<AsusDevice> = Vec::new();
+
+        let mut enumerator = udev::Enumerator::new().map_err(|err| {
+            warn!("{}", err);
+            PlatformError::Udev("enumerator failed".into(), err)
+        })?;
+
+        enumerator.match_subsystem("block").map_err(|err| {
+            warn!("{}", err);
+            PlatformError::Udev("match_subsystem failed".into(), err)
+        })?;
+
+        let mut found = Vec::new();
+        for device in enumerator
+            .scan_devices()
+            .map_err(|e| PlatformError::IoPath("enumerator".to_owned(), e))?
+        {
+            if let Some(serial) = device.property_value("ID_SERIAL_SHORT") {
+                let serial = serial.to_string_lossy().to_string();
+                let path = dbus_path_for_scsi(&serial);
+                if found.contains(&path) {
+                    continue;
+                }
+
+                if let Some(dev) = Self::init_scsi(connection, &device, path.clone()).await {
+                    devices.push(dev);
+                    found.push(path);
+                }
+            } else {
+                debug!("No serial for SCSI device: {:?}", device.devpath());
+            }
+        }
+
+        Ok(devices)
+    }
+
+    pub async fn find_all_devices(
+        connection: &Connection,
+        handles: Arc<Mutex<HashMap<String, Arc<Mutex<HidRaw>>>>>,
+    ) -> Vec<AsusDevice> {
+        let mut devices: Vec<AsusDevice> = Vec::new();
+        // HID first, always
+        if let Ok(devs) = &mut Self::init_all_hid(connection, handles.clone()).await {
+            devices.append(devs);
+        }
+        // USB after, need to check if HID picked something up and if so, skip it
+        let mut do_anime = true;
+        let mut do_slash = true;
+        let mut do_kb_backlight = true;
+        for dev in devices.iter() {
+            if matches!(dev.device, DeviceHandle::Slash(_)) {
+                do_slash = false;
+            }
+            if matches!(dev.device, DeviceHandle::AniMe(_)) {
+                do_anime = false;
+            }
+            if matches!(dev.device, DeviceHandle::Aura(_) | DeviceHandle::OldAura(_)) {
+                do_kb_backlight = false;
+            }
+        }
+
+        if do_slash {
+            if let Ok(dev_type) = DeviceHandle::new_slash_usb().await {
+                if let DeviceHandle::Slash(slash) = dev_type.clone() {
+                    let path = dbus_path_for_slash();
+                    let ctrl = SlashZbus::new(slash);
+                    ctrl.start_tasks(connection, path.clone()).await.unwrap();
+                    devices.push(AsusDevice {
+                        device: dev_type,
+                        dbus_path: path,
+                        hid_key: None,
+                    });
+                }
+            } else {
+                info!("Tested device was not Slash");
+            }
+        }
+
+        if do_anime {
+            if let Ok(dev_type) = DeviceHandle::maybe_anime_usb().await {
+                // TODO: this is copy/pasted
+                if let DeviceHandle::AniMe(anime) = dev_type.clone() {
+                    let path = dbus_path_for_anime();
+                    let ctrl = AniMeZbus::new(anime);
+                    if ctrl
+                        .start_tasks(connection, path.clone())
+                        .await
+                        .map_err(|e| error!("Failed to start tasks: {e:?}, not adding this device"))
+                        .is_ok()
+                    {
+                        devices.push(AsusDevice {
+                            device: dev_type,
+                            dbus_path: path,
+                            hid_key: None,
+                        });
+                    }
+                }
+            } else {
+                info!("Tested device was not AniMe Matrix");
+            }
+        }
+
+        if do_kb_backlight {
+            // TUF AURA LAPTOP DEVICE
+            // product_name = ASUS TUF Gaming F15 FX507ZE_FX507ZE
+            // product_family = ASUS TUF Gaming F15
+            let product_name = DMIID::new().unwrap_or_default().product_name;
+            let product_family = DMIID::new().unwrap_or_default().product_family;
+            info!(
+                "No USB keyboard aura, system is {product_name}, try using sysfs backlight control"
+            );
+            if product_name.contains("TUF") || product_family.contains("TUF") {
+                info!("TUF laptop, try using sysfs backlight control");
+                if let Ok(dev_type) = DeviceHandle::maybe_laptop_aura(None, "tuf").await {
+                    if let DeviceHandle::Aura(aura) = dev_type.clone() {
+                        let path = dbus_path_for_tuf();
+                        let ctrl = AuraZbus::new(aura);
+                        ctrl.start_tasks(connection, path.clone()).await.unwrap();
+                        devices.push(AsusDevice {
+                            device: dev_type,
+                            dbus_path: path,
+                            hid_key: None,
+                        });
+                    }
+                }
+            }
+        }
+
+        if let Ok(devs) = &mut Self::init_all_scsi(connection).await {
+            devices.append(devs);
+        }
+
+        devices
+    }
+
+    pub async fn new(connection: Connection) -> Result<Self, RogError> {
+        let conn_copy = connection.clone();
+        let hid_handles = Arc::new(Mutex::new(HashMap::new()));
+        let devices = Self::find_all_devices(&conn_copy, hid_handles.clone()).await;
+        info!("Found {} valid devices on startup", devices.len());
+        let devices = Arc::new(Mutex::new(devices));
+        let manager = Self {
+            _dbus_connection: connection,
+            _hid_handles: hid_handles.clone(),
+        };
+
+        // TODO: The /sysfs/ LEDs don't cause events, so they need to be manually
+        // checked for and added
+
+        let hid_handles_thread = hid_handles.clone();
+        std::thread::spawn(move || {
+            let mut monitor = MonitorBuilder::new()?.listen()?;
+            let mut poll = Poll::new()?;
+            let mut events = Events::with_capacity(1024);
+            poll.registry()
+                .register(&mut monitor, Token(0), Interest::READABLE)?;
+
+            let rt = tokio::runtime::Runtime::new().expect("Unable to create Runtime");
+            let _enter = rt.enter();
+            loop {
+                if poll.poll(&mut events, None).is_err() {
+                    continue;
+                }
+                for event in monitor.iter() {
+                    let action = event
+                        .action()
+                        .unwrap_or_default()
+                        .to_string_lossy()
+                        .to_string();
+
+                    let subsys = if let Some(subsys) = event.subsystem() {
+                        subsys.to_string_lossy().to_string()
+                    } else {
+                        continue;
+                    };
+
+                    let devices = devices.clone();
+                    let conn_copy = conn_copy.clone();
+                    let hid_handles = hid_handles_thread.clone();
+                    block_on(async move {
+                        // SCSCI devs
+                        if subsys == "block" {
+                            if action == "remove" {
+                                if let Some(serial) =
+                                    event.device().property_value("ID_SERIAL_SHORT")
+                                {
+                                    let serial = serial.to_string_lossy().to_string();
+                                    let path = dbus_path_for_scsi(&serial);
+
+                                    let index = if let Some(index) = devices
+                                        .lock()
+                                        .await
+                                        .iter()
+                                        .position(|dev| dev.dbus_path == path)
+                                    {
+                                        index
+                                    } else {
+                                        if dev_prop_matches(&event.device(), "ID_VENDOR_ID", "0b05")
+                                        {
+                                            warn!("No device for dbus path: {path:?}");
+                                        }
+                                        return Ok(());
+                                    };
+                                    info!("removing: {path:?}");
+                                    let dev = devices.lock().await.remove(index);
+                                    let path = path.clone();
+                                    if let DeviceHandle::Scsi(_) = dev.device {
+                                        conn_copy
+                                            .object_server()
+                                            .remove::<ScsiZbus, _>(&path)
+                                            .await?;
+                                    }
+                                }
+                            } else if action == "add" {
+                                let evdev = event.device();
+                                if let Some(serial) = evdev.property_value("ID_SERIAL_SHORT") {
+                                    let serial = serial.to_string_lossy().to_string();
+                                    let path = dbus_path_for_scsi(&serial);
+                                    if let Some(new_devs) =
+                                        Self::init_scsi(&conn_copy, &evdev, path).await
+                                    {
+                                        devices.lock().await.append(&mut vec![new_devs]);
+                                    }
+                                }
+                            };
+                        }
+
+                        if subsys == "hidraw" {
+                            if let Some(parent) =
+                                event.parent_with_subsystem_devtype("usb", "usb_device")?
+                            {
+                                if action == "remove" {
+                                    if let Some(path) = dbus_path_for_dev(&parent) {
+                                        // Find the indexs of devices matching the path
+                                        let removals: Vec<usize> = devices
+                                            .lock()
+                                            .await
+                                            .iter()
+                                            .enumerate()
+                                            .filter_map(|(i, dev)| {
+                                                if dev.dbus_path == path {
+                                                    Some(i)
+                                                } else {
+                                                    None
+                                                }
+                                            })
+                                            .collect();
+                                        if removals.is_empty() {
+                                            return Ok(());
+                                        }
+                                        info!("removing: {path:?}");
+                                        // Iter in reverse so as to not screw up indexing
+                                        for index in removals.iter().rev() {
+                                            let dev = devices.lock().await.remove(*index);
+                                            let hid_key = dev.hid_key.clone();
+                                            let path = path.clone();
+                                            let res = match dev.device {
+                                                DeviceHandle::Aura(_) => {
+                                                    conn_copy
+                                                        .object_server()
+                                                        .remove::<AuraZbus, _>(&path)
+                                                        .await?
+                                                }
+                                                DeviceHandle::Slash(_) => {
+                                                    conn_copy
+                                                        .object_server()
+                                                        .remove::<SlashZbus, _>(&path)
+                                                        .await?
+                                                }
+                                                DeviceHandle::AniMe(_) => {
+                                                    conn_copy
+                                                        .object_server()
+                                                        .remove::<AniMeZbus, _>(&path)
+                                                        .await?
+                                                }
+                                                DeviceHandle::Scsi(_) => {
+                                                    conn_copy
+                                                        .object_server()
+                                                        .remove::<ScsiZbus, _>(&path)
+                                                        .await?
+                                                }
+                                                _ => todo!(),
+                                            };
+                                            info!("AuraManager removed: {path:?}, {res}");
+                                            if let Some(key) = hid_key {
+                                                hid_handles.lock().await.remove(&key);
+                                            }
+                                        }
+                                    }
+                                } else if action == "add" {
+                                    let evdev = event.device();
+                                    if let Ok(mut new_devs) = Self::init_hid_devices(
+                                        &conn_copy,
+                                        evdev,
+                                        hid_handles.clone(),
+                                    )
+                                    .await
+                                    .map_err(|e| error!("Couldn't add new device: {e:?}"))
+                                    {
+                                        devices.lock().await.append(&mut new_devs);
+                                    }
+                                };
+                            }
+                        }
+                        Ok::<(), RogError>(())
+                    })
+                    .map_err(|e| error!("{e:?}"))
+                    .ok();
+                }
+            }
+            // Required for return type on spawn
+            #[allow(unreachable_code)]
+            Ok::<(), RogError>(())
+        });
+        Ok(manager)
+    }
+}

asusd/src/aura_scsi/config.rs

@@ -0,0 +1,114 @@
+use std::collections::BTreeMap;
+
+use config_traits::{StdConfig, StdConfigLoad};
+use rog_aura::AuraDeviceType;
+use rog_scsi::{AuraEffect, AuraMode};
+use serde::{Deserialize, Serialize};
+
+const CONFIG_FILE: &str = "scsi.ron";
+
+/// Config for base system actions for the anime display
+#[derive(Deserialize, Serialize, Debug)]
+pub struct ScsiConfig {
+    #[serde(skip)]
+    pub dev_type: AuraDeviceType,
+    pub enabled: bool,
+    pub current_mode: AuraMode,
+    pub modes: BTreeMap<AuraMode, AuraEffect>,
+}
+
+impl ScsiConfig {
+    pub fn get_effect(&mut self, mode: AuraMode) -> Option<&AuraEffect> {
+        self.modes.get(&mode)
+    }
+
+    pub fn save_effect(&mut self, effect: AuraEffect) {
+        self.current_mode = effect.mode;
+        self.modes.insert(*effect.mode(), effect);
+    }
+}
+
+impl Default for ScsiConfig {
+    fn default() -> Self {
+        ScsiConfig {
+            enabled: true,
+            current_mode: AuraMode::Static,
+            dev_type: AuraDeviceType::ScsiExtDisk,
+            modes: BTreeMap::from([
+                (AuraMode::Off, AuraEffect::default_with_mode(AuraMode::Off)),
+                (
+                    AuraMode::Static,
+                    AuraEffect::default_with_mode(AuraMode::Static),
+                ),
+                (
+                    AuraMode::Breathe,
+                    AuraEffect::default_with_mode(AuraMode::Breathe),
+                ),
+                (
+                    AuraMode::Flashing,
+                    AuraEffect::default_with_mode(AuraMode::Flashing),
+                ),
+                (
+                    AuraMode::RainbowCycle,
+                    AuraEffect::default_with_mode(AuraMode::RainbowCycle),
+                ),
+                (
+                    AuraMode::RainbowWave,
+                    AuraEffect::default_with_mode(AuraMode::RainbowWave),
+                ),
+                (
+                    AuraMode::RainbowCycleBreathe,
+                    AuraEffect::default_with_mode(AuraMode::RainbowCycleBreathe),
+                ),
+                (
+                    AuraMode::ChaseFade,
+                    AuraEffect::default_with_mode(AuraMode::ChaseFade),
+                ),
+                (
+                    AuraMode::RainbowCycleChaseFade,
+                    AuraEffect::default_with_mode(AuraMode::RainbowCycleChaseFade),
+                ),
+                (
+                    AuraMode::Chase,
+                    AuraEffect::default_with_mode(AuraMode::Chase),
+                ),
+                (
+                    AuraMode::RainbowCycleChase,
+                    AuraEffect::default_with_mode(AuraMode::RainbowCycleChase),
+                ),
+                (
+                    AuraMode::RainbowCycleWave,
+                    AuraEffect::default_with_mode(AuraMode::RainbowCycleWave),
+                ),
+                (
+                    AuraMode::RainbowPulseChase,
+                    AuraEffect::default_with_mode(AuraMode::RainbowPulseChase),
+                ),
+                (
+                    AuraMode::RandomFlicker,
+                    AuraEffect::default_with_mode(AuraMode::RandomFlicker),
+                ),
+                (
+                    AuraMode::DoubleFade,
+                    AuraEffect::default_with_mode(AuraMode::DoubleFade),
+                ),
+            ]),
+        }
+    }
+}
+
+impl StdConfig for ScsiConfig {
+    fn new() -> Self {
+        Self::default()
+    }
+
+    fn file_name(&self) -> String {
+        CONFIG_FILE.to_owned()
+    }
+
+    fn config_dir() -> std::path::PathBuf {
+        std::path::PathBuf::from(crate::CONFIG_PATH_BASE)
+    }
+}
+
+impl StdConfigLoad for ScsiConfig {}

asusd/src/aura_scsi/mod.rs

@@ -0,0 +1,45 @@
+use std::sync::Arc;
+
+use config::ScsiConfig;
+use rog_scsi::{AuraEffect, Device, Task};
+use tokio::sync::{Mutex, MutexGuard};
+
+use crate::error::RogError;
+
+pub mod config;
+pub mod trait_impls;
+
+#[derive(Clone)]
+pub struct ScsiAura {
+    device: Arc<Mutex<Device>>,
+    config: Arc<Mutex<ScsiConfig>>,
+}
+
+impl ScsiAura {
+    pub fn new(device: Arc<Mutex<Device>>, config: Arc<Mutex<ScsiConfig>>) -> Self {
+        Self { device, config }
+    }
+
+    pub async fn lock_config(&self) -> MutexGuard<'_, ScsiConfig> {
+        self.config.lock().await
+    }
+
+    pub async fn write_effect(&self, effect: &AuraEffect) -> Result<(), RogError> {
+        let tasks: Vec<Task> = effect.into();
+        for task in &tasks {
+            self.device.lock().await.perform(task).ok();
+        }
+        Ok(())
+    }
+
+    /// Initialise the device if required. Locks the internal config so be wary
+    /// of deadlocks.
+    pub async fn do_initialization(&self) -> Result<(), RogError> {
+        let config = self.config.lock().await;
+        let mode = config.current_mode;
+        if let Some(effect) = config.modes.get(&mode) {
+            self.write_effect(effect).await?;
+        }
+        Ok(())
+    }
+}

asusd/src/aura_scsi/trait_impls.rs

@@ -0,0 +1,116 @@
+use std::collections::BTreeMap;
+
+use config_traits::StdConfig;
+use log::error;
+use rog_aura::AuraDeviceType;
+use rog_scsi::{AuraEffect, AuraMode};
+use zbus::fdo::Error as ZbErr;
+use zbus::zvariant::OwnedObjectPath;
+use zbus::{interface, Connection};
+
+use super::ScsiAura;
+use crate::error::RogError;
+
+#[derive(Clone)]
+pub struct ScsiZbus(ScsiAura);
+
+impl ScsiZbus {
+    pub fn new(scsi: ScsiAura) -> Self {
+        Self(scsi)
+    }
+
+    pub async fn start_tasks(
+        self,
+        connection: &Connection,
+        path: OwnedObjectPath,
+    ) -> Result<(), RogError> {
+        connection
+            .object_server()
+            .at(path.clone(), self)
+            .await
+            .map_err(|e| error!("Couldn't add server at path: {path}, {e:?}"))
+            .ok();
+        Ok(())
+    }
+}
+
+#[interface(name = "xyz.ljones.ScsiAura")]
+impl ScsiZbus {
+    /// Return the device type for this Aura keyboard
+    #[zbus(property)]
+    async fn device_type(&self) -> AuraDeviceType {
+        self.0.config.lock().await.dev_type
+    }
+
+    /// Get enabled or not
+    #[zbus(property)]
+    async fn enabled(&self) -> bool {
+        let lock = self.0.lock_config().await;
+        lock.enabled
+    }
+
+    /// Set enabled true or false
+    #[zbus(property)]
+    async fn set_enabled(&self, enabled: bool) {
+        let mut config = self.0.lock_config().await;
+        config.enabled = enabled;
+        config.write();
+    }
+
+    #[zbus(property)]
+    async fn led_mode(&self) -> u8 {
+        let config = self.0.lock_config().await;
+        config.current_mode as u8
+    }
+
+    #[zbus(property)]
+    async fn set_led_mode(&self, mode: AuraMode) -> Result<(), zbus::Error> {
+        let mut config = self.0.lock_config().await;
+        if let Some(effect) = config.get_effect(mode) {
+            self.0
+                .write_effect(effect)
+                .await
+                .map_err(|e| zbus::Error::Failure(format!("{e:?}")))?;
+        } else {
+            return Err(zbus::Error::Failure("Mode data does not exist".to_string()));
+        }
+        config.current_mode = mode;
+        config.write();
+        Ok(())
+    }
+
+    /// The current mode data
+    #[zbus(property)]
+    async fn led_mode_data(&self) -> Result<AuraEffect, ZbErr> {
+        // entirely possible to deadlock here, so use try instead of lock()
+        if let Ok(config) = self.0.config.try_lock() {
+            let mode = config.current_mode;
+            match config.modes.get(&mode) {
+                Some(effect) => Ok(effect.clone()),
+                None => Err(ZbErr::Failed("Could not get the current effect".into())),
+            }
+        } else {
+            Err(ZbErr::Failed("Aura control couldn't lock self".to_string()))
+        }
+    }
+
+    /// Set an Aura effect if the effect mode or zone is supported.
+    ///
+    /// On success the aura config file is read to refresh cached values, then
+    /// the effect is stored and config written to disk.
+    #[zbus(property)]
+    async fn set_led_mode_data(&mut self, effect: AuraEffect) -> Result<(), ZbErr> {
+        self.0.write_effect(&effect).await?;
+
+        let mut config = self.0.config.lock().await;
+        config.save_effect(effect);
+        config.write();
+        Ok(())
+    }
+
+    /// Get the data set for every mode available
+    async fn all_mode_data(&self) -> BTreeMap<AuraMode, AuraEffect> {
+        let config = self.0.config.lock().await;
+        config.modes.clone()
+    }
+}

asusd/src/aura_slash/config.rs

@@ -0,0 +1,66 @@
+use config_traits::{StdConfig, StdConfigLoad};
+use rog_slash::{DeviceState, SlashMode, SlashType};
+use serde::{Deserialize, Serialize};
+
+const CONFIG_FILE: &str = "slash.ron";
+
+/// Config for base system actions for the anime display
+#[derive(Deserialize, Serialize, Debug)]
+pub struct SlashConfig {
+    #[serde(skip)]
+    pub slash_type: SlashType,
+    pub enabled: bool,
+    pub brightness: u8,
+    pub display_interval: u8,
+    pub display_mode: SlashMode,
+    pub show_on_boot: bool,
+    pub show_on_shutdown: bool,
+    pub show_on_sleep: bool,
+    pub show_on_battery: bool,
+    pub show_battery_warning: bool,
+    pub show_on_lid_closed: bool,
+}
+
+impl Default for SlashConfig {
+    fn default() -> Self {
+        SlashConfig {
+            enabled: true,
+            brightness: 255,
+            display_interval: 0,
+            display_mode: SlashMode::Bounce,
+            slash_type: SlashType::Unsupported,
+            show_on_boot: true,
+            show_on_shutdown: true,
+            show_on_sleep: true,
+            show_on_battery: true,
+            show_battery_warning: true,
+            show_on_lid_closed: true,
+        }
+    }
+}
+impl StdConfig for SlashConfig {
+    fn new() -> Self {
+        Self::default()
+    }
+
+    fn file_name(&self) -> String {
+        CONFIG_FILE.to_owned()
+    }
+
+    fn config_dir() -> std::path::PathBuf {
+        std::path::PathBuf::from(crate::CONFIG_PATH_BASE)
+    }
+}
+
+impl StdConfigLoad for SlashConfig {}
+
+impl From<&SlashConfig> for DeviceState {
+    fn from(config: &SlashConfig) -> Self {
+        DeviceState {
+            slash_enabled: config.enabled,
+            slash_brightness: config.brightness,
+            slash_interval: config.display_interval,
+            slash_mode: config.display_mode,
+        }
+    }
+}

asusd/src/aura_slash/mod.rs

@@ -0,0 +1,69 @@
+use std::sync::Arc;
+
+use config::SlashConfig;
+use rog_platform::hid_raw::HidRaw;
+use rog_platform::usb_raw::USBRaw;
+use rog_slash::usb::{slash_pkt_enable, slash_pkt_init, slash_pkt_options, slash_pkt_set_mode};
+use tokio::sync::{Mutex, MutexGuard};
+
+use crate::error::RogError;
+
+pub mod config;
+pub mod trait_impls;
+
+#[derive(Debug, Clone)]
+pub struct Slash {
+    hid: Option<Arc<Mutex<HidRaw>>>,
+    usb: Option<Arc<Mutex<USBRaw>>>,
+    config: Arc<Mutex<SlashConfig>>,
+}
+
+impl Slash {
+    pub fn new(
+        hid: Option<Arc<Mutex<HidRaw>>>,
+        usb: Option<Arc<Mutex<USBRaw>>>,
+        config: Arc<Mutex<SlashConfig>>,
+    ) -> Self {
+        Self { hid, usb, config }
+    }
+
+    pub async fn lock_config(&self) -> MutexGuard<'_, SlashConfig> {
+        self.config.lock().await
+    }
+
+    pub async fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
+        if let Some(hid) = &self.hid {
+            hid.lock().await.write_bytes(message)?;
+        } else if let Some(usb) = &self.usb {
+            usb.lock().await.write_bytes(message)?;
+        }
+        Ok(())
+    }
+
+    /// Initialise the device if required. Locks the internal config so be wary
+    /// of deadlocks.
+    pub async fn do_initialization(&self) -> Result<(), RogError> {
+        // Don't try to initialise these models as the asus drivers already did
+        let config = self.config.lock().await;
+        for pkt in &slash_pkt_init(config.slash_type) {
+            self.write_bytes(pkt).await?;
+        }
+        self.write_bytes(&slash_pkt_enable(config.slash_type, config.enabled))
+            .await?;
+
+        // Apply config upon initialization
+        let option_packets = slash_pkt_options(
+            config.slash_type,
+            config.enabled,
+            config.brightness,
+            config.display_interval,
+        );
+        self.write_bytes(&option_packets).await?;
+
+        let mode_packets = slash_pkt_set_mode(config.slash_type, config.display_mode);
+        // self.node.write_bytes(&mode_packets[0])?;
+        self.write_bytes(&mode_packets[1]).await?;
+
+        Ok(())
+    }
+}

asusd/src/aura_slash/trait_impls.rs

@@ -0,0 +1,317 @@
+use config_traits::StdConfig;
+use log::{debug, error, warn};
+use rog_slash::usb::{
+    slash_pkt_battery_saver, slash_pkt_boot, slash_pkt_enable, slash_pkt_lid_closed,
+    slash_pkt_low_battery, slash_pkt_options, slash_pkt_save, slash_pkt_set_mode,
+    slash_pkt_shutdown, slash_pkt_sleep,
+};
+use rog_slash::{DeviceState, SlashMode};
+use zbus::zvariant::OwnedObjectPath;
+use zbus::{interface, Connection};
+
+use super::Slash;
+use crate::error::RogError;
+use crate::Reloadable;
+
+#[derive(Clone)]
+pub struct SlashZbus(Slash);
+
+impl SlashZbus {
+    pub fn new(slash: Slash) -> Self {
+        Self(slash)
+    }
+
+    pub async fn start_tasks(
+        mut self,
+        connection: &Connection,
+        path: OwnedObjectPath,
+    ) -> Result<(), RogError> {
+        // let task = zbus.clone();
+        self.reload()
+            .await
+            .unwrap_or_else(|err| warn!("Controller error: {}", err));
+        connection
+            .object_server()
+            .at(path.clone(), self)
+            .await
+            .map_err(|e| error!("Couldn't add server at path: {path}, {e:?}"))
+            .ok();
+        Ok(())
+    }
+}
+
+#[interface(name = "xyz.ljones.Slash")]
+impl SlashZbus {
+    /// Get enabled or not
+    #[zbus(property)]
+    async fn enabled(&self) -> bool {
+        let lock = self.0.lock_config().await;
+        lock.enabled
+    }
+
+    /// Set enabled true or false
+    #[zbus(property)]
+    async fn set_enabled(&self, enabled: bool) {
+        let mut config = self.0.lock_config().await;
+        let brightness = if enabled && config.brightness == 0 {
+            0x88
+        } else {
+            config.brightness
+        };
+        self.0
+            .write_bytes(&slash_pkt_enable(config.slash_type, enabled))
+            .await
+            .map_err(|err| {
+                warn!("ctrl_slash::enable {}", err);
+            })
+            .ok();
+        self.0
+            .write_bytes(&slash_pkt_options(
+                config.slash_type,
+                enabled,
+                brightness,
+                config.display_interval,
+            ))
+            .await
+            .map_err(|err| {
+                warn!("ctrl_slash::set_options {}", err);
+            })
+            .ok();
+
+        config.enabled = enabled;
+        config.brightness = brightness;
+        config.write();
+    }
+
+    /// Get brightness level
+    #[zbus(property)]
+    async fn brightness(&self) -> u8 {
+        let config = self.0.lock_config().await;
+        config.brightness
+    }
+
+    /// Set brightness level
+    #[zbus(property)]
+    async fn set_brightness(&self, brightness: u8) {
+        let mut config = self.0.lock_config().await;
+        let enabled = brightness > 0;
+        self.0
+            .write_bytes(&slash_pkt_options(
+                config.slash_type,
+                enabled,
+                brightness,
+                config.display_interval,
+            ))
+            .await
+            .map_err(|err| {
+                warn!("ctrl_slash::set_options {}", err);
+            })
+            .ok();
+
+        config.enabled = enabled;
+        config.brightness = brightness;
+        config.write();
+    }
+
+    #[zbus(property)]
+    async fn interval(&self) -> u8 {
+        let config = self.0.lock_config().await;
+        config.display_interval
+    }
+
+    /// Set interval between slash animations (0-255)
+    #[zbus(property)]
+    async fn set_interval(&self, interval: u8) {
+        let mut config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_options(
+                config.slash_type, config.enabled, config.brightness, interval,
+            ))
+            .await
+            .map_err(|err| {
+                warn!("ctrl_slash::set_options {}", err);
+            })
+            .ok();
+
+        config.display_interval = interval;
+        config.write();
+    }
+
+    #[zbus(property)]
+    async fn mode(&self) -> zbus::fdo::Result<u8> {
+        let config = self.0.lock_config().await;
+        Ok(config.display_interval)
+    }
+
+    /// Set interval between slash animations (0-255)
+    #[zbus(property)]
+    async fn set_mode(&self, mode: SlashMode) -> zbus::Result<()> {
+        let mut config = self.0.lock_config().await;
+
+        let command_packets = slash_pkt_set_mode(config.slash_type, mode);
+        // self.node.write_bytes(&command_packets[0])?;
+        self.0.write_bytes(&command_packets[1]).await?;
+        self.0
+            .write_bytes(&slash_pkt_save(config.slash_type))
+            .await?;
+
+        config.display_mode = mode;
+        config.write();
+        Ok(())
+    }
+
+    /// Get the device state as stored by asusd
+    // #[zbus(property)]
+    async fn device_state(&self) -> DeviceState {
+        let config = self.0.lock_config().await;
+        DeviceState::from(&*config)
+    }
+
+    #[zbus(property)]
+    async fn show_on_boot(&self) -> zbus::fdo::Result<bool> {
+        let config = self.0.lock_config().await;
+        Ok(config.show_on_boot)
+    }
+
+    #[zbus(property)]
+    async fn set_show_on_boot(&self, enable: bool) -> zbus::Result<()> {
+        let mut config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_boot(config.slash_type, enable))
+            .await?;
+        config.show_on_boot = enable;
+        config.write();
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn show_on_sleep(&self) -> zbus::fdo::Result<bool> {
+        let config = self.0.lock_config().await;
+        Ok(config.show_on_sleep)
+    }
+
+    #[zbus(property)]
+    async fn set_show_on_sleep(&self, enable: bool) -> zbus::Result<()> {
+        let mut config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_sleep(config.slash_type, enable))
+            .await?;
+        config.show_on_sleep = enable;
+        config.write();
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn show_on_shutdown(&self) -> zbus::fdo::Result<bool> {
+        let config = self.0.lock_config().await;
+        Ok(config.show_on_shutdown)
+    }
+
+    #[zbus(property)]
+    async fn set_show_on_shutdown(&self, enable: bool) -> zbus::Result<()> {
+        let mut config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_shutdown(config.slash_type, enable))
+            .await?;
+        config.show_on_shutdown = enable;
+        config.write();
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn show_on_battery(&self) -> zbus::fdo::Result<bool> {
+        let config = self.0.lock_config().await;
+        Ok(config.show_on_battery)
+    }
+
+    #[zbus(property)]
+    async fn set_show_on_battery(&self, enable: bool) -> zbus::Result<()> {
+        let mut config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_battery_saver(config.slash_type, enable))
+            .await?;
+        config.show_on_battery = enable;
+        config.write();
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn show_battery_warning(&self) -> zbus::fdo::Result<bool> {
+        let config = self.0.lock_config().await;
+        Ok(config.show_battery_warning)
+    }
+
+    #[zbus(property)]
+    async fn set_show_battery_warning(&self, enable: bool) -> zbus::Result<()> {
+        let mut config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_low_battery(config.slash_type, enable))
+            .await?;
+        config.show_battery_warning = enable;
+        config.write();
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn show_on_lid_closed(&self) -> zbus::fdo::Result<bool> {
+        let config = self.0.lock_config().await;
+        Ok(config.show_on_lid_closed)
+    }
+
+    #[zbus(property)]
+    async fn set_show_on_lid_closed(&self, enable: bool) -> zbus::Result<()> {
+        let mut config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_lid_closed(config.slash_type, enable))
+            .await?;
+        self.0
+            .write_bytes(&slash_pkt_save(config.slash_type))
+            .await?;
+        config.show_on_lid_closed = enable;
+        config.write();
+        Ok(())
+    }
+}
+
+impl Reloadable for SlashZbus {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        debug!("reloading slash settings");
+        let config = self.0.lock_config().await;
+        self.0
+            .write_bytes(&slash_pkt_options(
+                config.slash_type,
+                config.enabled,
+                config.brightness,
+                config.display_interval,
+            ))
+            .await
+            .map_err(|err| {
+                warn!("set_options {}", err);
+            })
+            .ok();
+
+        macro_rules! write_bytes_with_warning {
+            ($packet_fn:expr, $cfg:ident, $warn_msg:expr) => {
+                self.0
+                    .write_bytes(&$packet_fn(config.slash_type, config.$cfg))
+                    .await
+                    .map_err(|err| {
+                        warn!("{} {}", $warn_msg, err);
+                    })
+                    .ok();
+            };
+        }
+
+        write_bytes_with_warning!(slash_pkt_boot, show_on_boot, "show_on_boot");
+        write_bytes_with_warning!(slash_pkt_sleep, show_on_sleep, "show_on_sleep");
+        write_bytes_with_warning!(slash_pkt_shutdown, show_on_shutdown, "show_on_shutdown");
+        write_bytes_with_warning!(slash_pkt_battery_saver, show_on_battery, "show_on_battery");
+        write_bytes_with_warning!(
+            slash_pkt_low_battery,
+            show_battery_warning,
+            "show_battery_warning"
+        );
+
+        Ok(())
+    }
+}

asusd/src/aura_types.rs

@@ -0,0 +1,209 @@
+use std::sync::Arc;
+
+use config_traits::{StdConfig, StdConfigLoad};
+use log::{debug, error, info};
+use rog_anime::error::AnimeError;
+use rog_anime::usb::get_anime_type;
+use rog_anime::AnimeType;
+use rog_aura::AuraDeviceType;
+use rog_platform::hid_raw::HidRaw;
+use rog_platform::keyboard_led::KeyboardBacklight;
+use rog_platform::usb_raw::USBRaw;
+use rog_scsi::{open_device, ScsiType};
+use rog_slash::error::SlashError;
+use rog_slash::SlashType;
+use tokio::sync::Mutex;
+
+use crate::aura_anime::config::AniMeConfig;
+use crate::aura_anime::AniMe;
+use crate::aura_laptop::config::AuraConfig;
+use crate::aura_laptop::Aura;
+use crate::aura_scsi::config::ScsiConfig;
+use crate::aura_scsi::ScsiAura;
+use crate::aura_slash::config::SlashConfig;
+use crate::aura_slash::Slash;
+use crate::error::RogError;
+
+pub enum _DeviceHandle {
+    /// The AniMe devices require USBRaw as they are not HID devices
+    Usb(USBRaw),
+    HidRaw(HidRaw),
+    LedClass(KeyboardBacklight),
+    /// TODO
+    MulticolourLed,
+    None,
+}
+
+#[derive(Clone)]
+pub enum DeviceHandle {
+    Aura(Aura),
+    Slash(Slash),
+    /// The AniMe devices require USBRaw as they are not HID devices
+    AniMe(AniMe),
+    Scsi(ScsiAura),
+    Ally(Arc<Mutex<HidRaw>>),
+    OldAura(Arc<Mutex<HidRaw>>),
+    /// TUF laptops have an aditional set of attributes added to the LED /sysfs/
+    TufLedClass(Arc<Mutex<HidRaw>>),
+    /// TODO
+    MulticolourLed,
+    None,
+}
+
+impl DeviceHandle {
+    /// Try Slash HID. If one exists it is initialsed and returned.
+    pub async fn new_slash_hid(
+        device: Arc<Mutex<HidRaw>>,
+        prod_id: &str,
+    ) -> Result<Self, RogError> {
+        debug!("Testing for HIDRAW Slash");
+        let slash_type = SlashType::from_dmi();
+        if matches!(slash_type, SlashType::Unsupported)
+            || slash_type
+                .prod_id_str()
+                .to_lowercase()
+                .trim_start_matches("0x")
+                != prod_id
+        {
+            log::info!("Unknown or invalid slash: {prod_id:?}, skipping");
+            return Err(RogError::NotFound("No slash device".to_string()));
+        }
+        info!("Found slash type {slash_type:?}: {prod_id}");
+
+        let mut config = SlashConfig::new().load();
+        config.slash_type = slash_type;
+        let slash = Slash::new(Some(device), None, Arc::new(Mutex::new(config)));
+        slash.do_initialization().await?;
+        Ok(Self::Slash(slash))
+    }
+
+    /// Try Slash USB. If one exists it is initialsed and returned.
+    pub async fn new_slash_usb() -> Result<Self, RogError> {
+        debug!("Testing for USB Slash");
+        let slash_type = SlashType::from_dmi();
+        if matches!(slash_type, SlashType::Unsupported) {
+            return Err(RogError::Slash(SlashError::NoDevice));
+        }
+
+        if let Ok(usb) = USBRaw::new(slash_type.prod_id()) {
+            info!("Found Slash USB {slash_type:?}");
+
+            let mut config = SlashConfig::new().load();
+            config.slash_type = slash_type;
+            let slash = Slash::new(
+                None,
+                Some(Arc::new(Mutex::new(usb))),
+                Arc::new(Mutex::new(config)),
+            );
+            slash.do_initialization().await?;
+            Ok(Self::Slash(slash))
+        } else {
+            Err(RogError::NotFound("No slash device found".to_string()))
+        }
+    }
+
+    /// Try AniMe Matrix HID. If one exists it is initialsed and returned.
+    pub async fn maybe_anime_hid(
+        _device: Arc<Mutex<HidRaw>>,
+        _prod_id: &str,
+    ) -> Result<Self, RogError> {
+        // TODO: can't use HIDRAW for anime at the moment
+        Err(RogError::NotFound(
+            "Can't use anime over hidraw yet. Skip.".to_string(),
+        ))
+
+        // debug!("Testing for HIDRAW AniMe");
+        // let anime_type = AnimeType::from_dmi();
+        // dbg!(prod_id);
+        // if matches!(anime_type, AnimeType::Unsupported) || prod_id != "193b"
+        // {     log::info!("Unknown or invalid AniMe: {prod_id:?},
+        // skipping");     return Err(RogError::NotFound("No
+        // anime-matrix device".to_string())); }
+        // info!("Found AniMe Matrix HIDRAW {anime_type:?}: {prod_id}");
+
+        // let mut config = AniMeConfig::new().load();
+        // config.anime_type = anime_type;
+        // let mut anime = AniMe::new(Some(device), None,
+        // Arc::new(Mutex::new(config))); anime.do_initialization().
+        // await?; Ok(Self::AniMe(anime))
+    }
+
+    pub async fn maybe_anime_usb() -> Result<Self, RogError> {
+        debug!("Testing for USB AniMe");
+        let anime_type = get_anime_type();
+        if matches!(anime_type, AnimeType::Unsupported) {
+            info!("No Anime Matrix capable laptop found");
+            return Err(RogError::Anime(AnimeError::NoDevice));
+        }
+
+        if let Ok(usb) = USBRaw::new(0x193b) {
+            info!("Found AniMe Matrix USB {anime_type:?}");
+
+            let mut config = AniMeConfig::new().load();
+            config.anime_type = anime_type;
+            let mut anime = AniMe::new(
+                None,
+                Some(Arc::new(Mutex::new(usb))),
+                Arc::new(Mutex::new(config)),
+            );
+            anime.do_initialization().await?;
+            Ok(Self::AniMe(anime))
+        } else {
+            Err(RogError::NotFound(
+                "No AnimeMatrix device found".to_string(),
+            ))
+        }
+    }
+
+    pub async fn maybe_scsi(dev_node: &str, prod_id: &str) -> Result<Self, RogError> {
+        debug!("Testing for SCSI");
+        let prod_id = ScsiType::from(prod_id);
+        if prod_id == ScsiType::Unsupported {
+            log::info!("Unknown or invalid SCSI: {prod_id:?}, skipping");
+            return Err(RogError::NotFound("No SCSI device".to_string()));
+        }
+        info!("Found SCSI device {prod_id:?} on {dev_node}");
+
+        let mut config = ScsiConfig::new().load();
+        config.dev_type = AuraDeviceType::ScsiExtDisk;
+        let dev = Arc::new(Mutex::new(open_device(dev_node)?));
+        let scsi = ScsiAura::new(dev, Arc::new(Mutex::new(config)));
+        scsi.do_initialization().await?;
+        Ok(Self::Scsi(scsi))
+    }
+
+    pub async fn maybe_laptop_aura(
+        device: Option<Arc<Mutex<HidRaw>>>,
+        prod_id: &str,
+    ) -> Result<Self, RogError> {
+        debug!("Testing for laptop aura");
+        let aura_type = AuraDeviceType::from(prod_id);
+        if !matches!(
+            aura_type,
+            AuraDeviceType::LaptopKeyboard2021
+                | AuraDeviceType::LaptopKeyboardPre2021
+                | AuraDeviceType::LaptopKeyboardTuf
+        ) {
+            log::info!("Unknown or invalid laptop aura: {prod_id:?}, skipping");
+            return Err(RogError::NotFound("No laptop aura device".to_string()));
+        }
+        info!("Found laptop aura type {prod_id:?}");
+
+        let backlight = KeyboardBacklight::new()
+            .map_err(|e| error!("Keyboard backlight error: {e:?}"))
+            .map_or(None, |k| {
+                info!("Found sysfs backlight control");
+                Some(Arc::new(Mutex::new(k)))
+            });
+
+        let mut config = AuraConfig::load_and_update_config(prod_id);
+        config.led_type = aura_type;
+        let aura = Aura {
+            hid: device,
+            backlight,
+            config: Arc::new(Mutex::new(config)),
+        };
+        aura.do_initialization().await?;
+        Ok(Self::Aura(aura))
+    }
+}

asusd/src/config.rs

@@ -1,85 +1,119 @@
-use config_traits::{StdConfig, StdConfigLoad1};
+use std::collections::HashMap;
+
+use config_traits::{StdConfig, StdConfigLoad2};
+use rog_platform::asus_armoury::FirmwareAttribute;
 use rog_platform::cpu::CPUEPP;
-use rog_platform::platform::ThrottlePolicy;
-use serde_derive::{Deserialize, Serialize};
+use rog_platform::platform::PlatformProfile;
+use serde::{Deserialize, Serialize};
 
 const CONFIG_FILE: &str = "asusd.ron";
 
-#[derive(Deserialize, Serialize, Debug, PartialEq, PartialOrd)]
+/// Default value for base_charge_control_end_threshold when not present in config.
+/// Returns 0 so restore_charge_limit() skips restoration for upgraded configs.
+fn default_base_charge_limit() -> u8 {
+    0
+}
+
+#[derive(Default, Clone, Deserialize, Serialize, PartialEq)]
+pub struct Tuning {
+    pub enabled: bool,
+    pub group: HashMap<FirmwareAttribute, i32>,
+}
+type Tunings = HashMap<PlatformProfile, Tuning>;
+
+#[derive(Deserialize, Serialize, PartialEq)]
 pub struct Config {
-    /// Save charge limit for restoring on boot/resume
+    // The current charge limit applied
     pub charge_control_end_threshold: u8,
-    pub panel_od: bool,
-    pub boot_sound: bool,
-    pub mini_led_mode: bool,
+    /// Save charge limit for restoring after one-shot full charge
+    #[serde(default = "default_base_charge_limit")]
+    pub base_charge_control_end_threshold: u8,
     pub disable_nvidia_powerd_on_battery: bool,
     /// An optional command/script to run when power is changed to AC
     pub ac_command: String,
     /// An optional command/script to run when power is changed to battery
     pub bat_command: String,
     /// Set true if energy_performance_preference should be set if the
-    /// throttle/platform profile is changed
-    pub throttle_policy_linked_epp: bool,
-    /// Which throttle/profile to use on battery power
-    pub throttle_policy_on_battery: ThrottlePolicy,
-    /// Which throttle/profile to use on AC power
-    pub throttle_policy_on_ac: ThrottlePolicy,
-    /// The energy_performance_preference for this throttle/platform profile
-    pub throttle_quiet_epp: CPUEPP,
-    /// The energy_performance_preference for this throttle/platform profile
-    pub throttle_balanced_epp: CPUEPP,
-    /// The energy_performance_preference for this throttle/platform profile
-    pub throttle_performance_epp: CPUEPP,
-    /// Defaults to `None` if not supported
+    /// platform profile is changed
+    pub platform_profile_linked_epp: bool,
+    /// Which platform profile to use on battery power
+    pub platform_profile_on_battery: PlatformProfile,
+    /// Should the throttle policy be set on bat/ac change?
+    pub change_platform_profile_on_battery: bool,
+    /// Which platform profile to use on AC power
+    pub platform_profile_on_ac: PlatformProfile,
+    /// Should the platform profile be set on bat/ac change?
+    pub change_platform_profile_on_ac: bool,
+    /// The energy_performance_preference for this platform profile
+    pub profile_quiet_epp: CPUEPP,
+    /// The energy_performance_preference for this platform profile
+    pub profile_balanced_epp: CPUEPP,
+    /// The energy_performance_preference for this platform profile
+    pub profile_custom_epp: CPUEPP,
+    /// The energy_performance_preference for this platform profile
+    pub profile_performance_epp: CPUEPP,
+    pub ac_profile_tunings: Tunings,
+    pub dc_profile_tunings: Tunings,
+    pub armoury_settings: HashMap<FirmwareAttribute, i32>,
     #[serde(skip_serializing_if = "Option::is_none", default)]
-    pub ppt_pl1_spl: Option<u8>,
-    /// Defaults to `None` if not supported
+    pub screenpad_gamma: Option<f32>,
     #[serde(skip_serializing_if = "Option::is_none", default)]
-    pub ppt_pl2_sppt: Option<u8>,
-    /// Defaults to `None` if not supported
-    #[serde(skip_serializing_if = "Option::is_none", default)]
-    pub ppt_fppt: Option<u8>,
-    /// Defaults to `None` if not supported
-    #[serde(skip_serializing_if = "Option::is_none", default)]
-    pub ppt_apu_sppt: Option<u8>,
-    /// Defaults to `None` if not supported
-    #[serde(skip_serializing_if = "Option::is_none", default)]
-    pub ppt_platform_sppt: Option<u8>,
-    /// Defaults to `None` if not supported
-    #[serde(skip_serializing_if = "Option::is_none", default)]
-    pub nv_dynamic_boost: Option<u8>,
-    /// Defaults to `None` if not supported
-    #[serde(skip_serializing_if = "Option::is_none", default)]
-    pub nv_temp_target: Option<u8>,
+    pub screenpad_sync_primary: Option<bool>,
     /// Temporary state for AC/Batt
     #[serde(skip)]
     pub last_power_plugged: u8,
 }
 
+impl Config {
+    pub fn select_tunings(&mut self, power_plugged: bool, profile: PlatformProfile) -> &mut Tuning {
+        let config = if power_plugged {
+            &mut self.ac_profile_tunings
+        } else {
+            &mut self.dc_profile_tunings
+        };
+        config.entry(profile).or_insert_with(Tuning::default)
+    }
+
+    pub fn select_tunings_ref(
+        &self,
+        power_plugged: bool,
+        profile: PlatformProfile,
+    ) -> Option<&Tuning> {
+        let config = if power_plugged {
+            &self.ac_profile_tunings
+        } else {
+            &self.dc_profile_tunings
+        };
+        config.get(&profile)
+    }
+}
+
 impl Default for Config {
     fn default() -> Self {
         Self {
             charge_control_end_threshold: 100,
-            panel_od: false,
-            boot_sound: false,
-            mini_led_mode: false,
+            // NOTE: This is intentionally 100 (not 0 like the serde default).
+            // New installs get 100 (no limit). Upgraded configs missing this
+            // field get 0 via serde, which skips restore_charge_limit().
+            base_charge_control_end_threshold: 100,
             disable_nvidia_powerd_on_battery: true,
             ac_command: Default::default(),
             bat_command: Default::default(),
-            throttle_policy_linked_epp: true,
-            throttle_policy_on_battery: ThrottlePolicy::Quiet,
-            throttle_policy_on_ac: ThrottlePolicy::Performance,
-            throttle_quiet_epp: CPUEPP::Power,
-            throttle_balanced_epp: CPUEPP::BalancePower,
-            throttle_performance_epp: CPUEPP::Performance,
-            ppt_pl1_spl: Default::default(),
-            ppt_pl2_sppt: Default::default(),
-            ppt_fppt: Default::default(),
-            ppt_apu_sppt: Default::default(),
-            ppt_platform_sppt: Default::default(),
-            nv_dynamic_boost: Default::default(),
-            nv_temp_target: Default::default(),
+            platform_profile_linked_epp: true,
+            platform_profile_on_battery: PlatformProfile::Quiet,
+            change_platform_profile_on_battery: true,
+            platform_profile_on_ac: PlatformProfile::Performance,
+            change_platform_profile_on_ac: true,
+            profile_quiet_epp: CPUEPP::Power,
+            profile_balanced_epp: CPUEPP::BalancePower,
+            profile_performance_epp: CPUEPP::Performance,
+            profile_custom_epp: CPUEPP::Performance,
+            ac_profile_tunings: HashMap::default(),
+            dc_profile_tunings: HashMap::default(),
+            armoury_settings: HashMap::default(),
             last_power_plugged: Default::default(),
+            screenpad_gamma: Default::default(),
+            screenpad_sync_primary: Default::default(),
         }
     }
 }
@@ -89,8 +123,8 @@ impl StdConfig for Config {
         Config {
             charge_control_end_threshold: 100,
             disable_nvidia_powerd_on_battery: true,
-            throttle_policy_on_battery: ThrottlePolicy::Quiet,
-            throttle_policy_on_ac: ThrottlePolicy::Performance,
+            platform_profile_on_battery: PlatformProfile::Quiet,
+            platform_profile_on_ac: PlatformProfile::Performance,
             ac_command: String::new(),
             bat_command: String::new(),
             ..Default::default()
@@ -106,54 +140,128 @@ impl StdConfig for Config {
     }
 }
 
-impl StdConfigLoad1<Config507> for Config {}
+impl StdConfigLoad2<Config611, Config601> for Config {}
 
 #[derive(Deserialize, Serialize)]
-pub struct Config507 {
-    /// Save charge limit for restoring on boot
+pub struct Config611 {
     pub charge_control_end_threshold: u8,
+    #[serde(skip)]
+    pub base_charge_control_end_threshold: u8,
+    pub disable_nvidia_powerd_on_battery: bool,
+    pub ac_command: String,
+    pub bat_command: String,
+    pub platform_profile_linked_epp: bool,
+    pub platform_profile_on_battery: PlatformProfile,
+    pub change_platform_profile_on_battery: bool,
+    pub platform_profile_on_ac: PlatformProfile,
+    pub change_platform_profile_on_ac: bool,
+    pub profile_quiet_epp: CPUEPP,
+    pub profile_balanced_epp: CPUEPP,
+    pub profile_custom_epp: CPUEPP,
+    pub profile_performance_epp: CPUEPP,
+    pub ac_profile_tunings: Tunings,
+    pub dc_profile_tunings: Tunings,
+    pub armoury_settings: HashMap<FirmwareAttribute, i32>,
+    #[serde(skip)]
+    pub last_power_plugged: u8,
+}
+
+impl From<Config611> for Config {
+    fn from(c: Config611) -> Self {
+        let mut config = Self {
+            // Restore the base charge limit
+            charge_control_end_threshold: c.charge_control_end_threshold,
+            base_charge_control_end_threshold: c.charge_control_end_threshold,
+            disable_nvidia_powerd_on_battery: c.disable_nvidia_powerd_on_battery,
+            ac_command: c.ac_command,
+            bat_command: c.bat_command,
+            platform_profile_linked_epp: c.platform_profile_linked_epp,
+            platform_profile_on_battery: c.platform_profile_on_battery,
+            change_platform_profile_on_battery: c.change_platform_profile_on_battery,
+            platform_profile_on_ac: c.platform_profile_on_ac,
+            change_platform_profile_on_ac: c.change_platform_profile_on_ac,
+            profile_quiet_epp: c.profile_quiet_epp,
+            profile_balanced_epp: c.profile_balanced_epp,
+            profile_performance_epp: c.profile_performance_epp,
+            profile_custom_epp: c.profile_performance_epp,
+            last_power_plugged: c.last_power_plugged,
+            ac_profile_tunings: HashMap::default(),
+            dc_profile_tunings: HashMap::default(),
+            armoury_settings: HashMap::default(),
+            screenpad_gamma: None,
+            screenpad_sync_primary: Default::default(),
+        };
+
+        config.ac_profile_tunings = c.ac_profile_tunings;
+        config.dc_profile_tunings = c.dc_profile_tunings;
+        config.armoury_settings = c.armoury_settings;
+        config
+    }
+}
+
+#[derive(Deserialize, Serialize)]
+pub struct Config601 {
+    pub charge_control_end_threshold: u8,
+    #[serde(skip)]
+    pub base_charge_control_end_threshold: u8,
     pub panel_od: bool,
+    pub boot_sound: bool,
     pub mini_led_mode: bool,
     pub disable_nvidia_powerd_on_battery: bool,
     pub ac_command: String,
     pub bat_command: String,
-    pub platform_policy_linked_epp: bool,
-    pub platform_policy_on_battery: ThrottlePolicy,
-    pub platform_policy_on_ac: ThrottlePolicy,
-    //
+    pub platform_profile_linked_epp: bool,
+    pub platform_profile_on_battery: PlatformProfile,
+    pub change_platform_profile_on_battery: bool,
+    pub platform_profile_on_ac: PlatformProfile,
+    pub change_platform_profile_on_ac: bool,
+    pub profile_quiet_epp: CPUEPP,
+    pub profile_balanced_epp: CPUEPP,
+    pub profile_performance_epp: CPUEPP,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
     pub ppt_pl1_spl: Option<u8>,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
     pub ppt_pl2_sppt: Option<u8>,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
+    pub ppt_pl3_fppt: Option<u8>,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
     pub ppt_fppt: Option<u8>,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
     pub ppt_apu_sppt: Option<u8>,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
     pub ppt_platform_sppt: Option<u8>,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
     pub nv_dynamic_boost: Option<u8>,
+    #[serde(skip_serializing_if = "Option::is_none", default)]
     pub nv_temp_target: Option<u8>,
+    #[serde(skip)]
+    pub last_power_plugged: u8,
 }
 
-impl From<Config507> for Config {
-    fn from(c: Config507) -> Self {
+impl From<Config601> for Config {
+    fn from(c: Config601) -> Self {
         Self {
+            // Restore the base charge limit
             charge_control_end_threshold: c.charge_control_end_threshold,
-            panel_od: c.panel_od,
-            boot_sound: false,
+            base_charge_control_end_threshold: c.charge_control_end_threshold,
             disable_nvidia_powerd_on_battery: c.disable_nvidia_powerd_on_battery,
             ac_command: c.ac_command,
             bat_command: c.bat_command,
-            mini_led_mode: c.mini_led_mode,
-            throttle_policy_linked_epp: true,
-            throttle_policy_on_battery: c.platform_policy_on_battery,
-            throttle_policy_on_ac: c.platform_policy_on_ac,
-            throttle_quiet_epp: CPUEPP::Power,
-            throttle_balanced_epp: CPUEPP::BalancePower,
-            throttle_performance_epp: CPUEPP::Performance,
-            ppt_pl1_spl: c.ppt_pl1_spl,
-            ppt_pl2_sppt: c.ppt_pl2_sppt,
-            ppt_fppt: c.ppt_fppt,
-            ppt_apu_sppt: c.ppt_apu_sppt,
-            ppt_platform_sppt: c.ppt_platform_sppt,
-            nv_dynamic_boost: c.nv_dynamic_boost,
-            nv_temp_target: c.nv_temp_target,
-            last_power_plugged: 0,
+            platform_profile_linked_epp: c.platform_profile_linked_epp,
+            platform_profile_on_battery: c.platform_profile_on_battery,
+            change_platform_profile_on_battery: c.change_platform_profile_on_battery,
+            platform_profile_on_ac: c.platform_profile_on_ac,
+            change_platform_profile_on_ac: c.change_platform_profile_on_ac,
+            profile_quiet_epp: c.profile_quiet_epp,
+            profile_balanced_epp: c.profile_balanced_epp,
+            profile_performance_epp: c.profile_performance_epp,
+            profile_custom_epp: c.profile_performance_epp,
+            last_power_plugged: c.last_power_plugged,
+            ac_profile_tunings: HashMap::default(),
+            dc_profile_tunings: HashMap::default(),
+            armoury_settings: HashMap::default(),
+            screenpad_gamma: None,
+            screenpad_sync_primary: Default::default(),
         }
     }
 }

asusd/src/ctrl_anime/mod.rs

@@ -1,292 +0,0 @@
-pub mod config;
-/// Implements `CtrlTask`, Reloadable, `ZbusRun`
-pub mod trait_impls;
-
-use std::convert::TryFrom;
-use std::sync::atomic::{AtomicBool, Ordering};
-use std::sync::Arc;
-use std::thread::sleep;
-
-use ::zbus::export::futures_util::lock::Mutex;
-use config_traits::{StdConfig, StdConfigLoad2};
-use log::{error, info, warn};
-use rog_anime::error::AnimeError;
-use rog_anime::usb::{
-    get_anime_type, pkt_flush, pkt_set_brightness, pkt_set_enable_display,
-    pkt_set_enable_powersave_anim, pkts_for_init, Brightness,
-};
-use rog_anime::{ActionData, AnimeDataBuffer, AnimePacketType, AnimeType};
-use rog_platform::hid_raw::HidRaw;
-use rog_platform::usb_raw::USBRaw;
-
-use self::config::{AnimeConfig, AnimeConfigCached};
-use crate::error::RogError;
-
-enum Node {
-    Usb(USBRaw),
-    Hid(HidRaw),
-}
-
-impl Node {
-    pub fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
-        // TODO: map and pass on errors
-        match self {
-            Node::Usb(u) => {
-                u.write_bytes(message).ok();
-            }
-            Node::Hid(h) => {
-                h.write_bytes(message).ok();
-            }
-        }
-        Ok(())
-    }
-
-    pub fn set_builtins_enabled(&self, enabled: bool, bright: Brightness) -> Result<(), RogError> {
-        self.write_bytes(&pkt_set_enable_powersave_anim(enabled))?;
-        self.write_bytes(&pkt_set_enable_display(enabled))?;
-        self.write_bytes(&pkt_set_brightness(bright))?;
-        self.write_bytes(&pkt_set_enable_powersave_anim(enabled))
-    }
-}
-
-pub struct CtrlAnime {
-    // node: HidRaw,
-    node: Node,
-    anime_type: AnimeType,
-    cache: AnimeConfigCached,
-    config: AnimeConfig,
-    // set to force thread to exit
-    thread_exit: Arc<AtomicBool>,
-    // Set to false when the thread exits
-    thread_running: Arc<AtomicBool>,
-}
-
-impl CtrlAnime {
-    #[inline]
-    pub fn new() -> Result<CtrlAnime, RogError> {
-        let usb = USBRaw::new(0x193b).ok();
-        let hid = HidRaw::new("193b").ok();
-        let node = if usb.is_some() {
-            info!("Anime using the USB interface");
-            unsafe { Node::Usb(usb.unwrap_unchecked()) }
-        } else if hid.is_some() {
-            info!("Anime using the HID interface");
-            unsafe { Node::Hid(hid.unwrap_unchecked()) }
-        } else {
-            return Err(RogError::Anime(AnimeError::NoDevice));
-        };
-
-        // TODO: something better to set wakeups disabled
-        // if matches!(node, Node::Usb(_)) {
-        //     if let Ok(mut enumerator) = udev::Enumerator::new() {
-        //         enumerator.match_subsystem("usb").ok();
-        //         enumerator.match_attribute("idProduct", "193b").ok();
-
-        //         if let Ok(mut enumer) = enumerator.scan_devices() {
-        //             if let Some(mut dev) = enumer.next() {
-        //                 dev.set_attribute_value("power/wakeup", "disabled").ok();
-        //             }
-        //         }
-        //     }
-        // }
-
-        let config = AnimeConfig::new().load();
-        let mut anime_type = get_anime_type()?;
-        if let AnimeType::Unknown = anime_type {
-            if let Some(model) = config.model_override {
-                warn!("Overriding the Animatrix type as {model:?}");
-                anime_type = model;
-            }
-        }
-
-        info!("Device has an AniMe Matrix display: {anime_type:?}");
-        let mut cache = AnimeConfigCached::default();
-        cache.init_from_config(&config, anime_type)?;
-
-        let ctrl = CtrlAnime {
-            node,
-            anime_type,
-            cache,
-            config,
-            thread_exit: Arc::new(AtomicBool::new(false)),
-            thread_running: Arc::new(AtomicBool::new(false)),
-        };
-        ctrl.do_initialization()?;
-
-        Ok(ctrl)
-    }
-
-    // let device = CtrlAnime::get_device(0x0b05, 0x193b)?;
-
-    /// Start an action thread. This is classed as a singleton and there should
-    /// be only one running - so the thread uses atomics to signal run/exit.
-    ///
-    /// Because this also writes to the usb device, other write tries (display
-    /// only) *must* get the mutex lock and set the `thread_exit` atomic.
-    async fn run_thread(inner: Arc<Mutex<CtrlAnime>>, actions: Vec<ActionData>, mut once: bool) {
-        if actions.is_empty() {
-            warn!("AniMe system actions was empty");
-            return;
-        }
-
-        if let Some(lock) = inner.try_lock() {
-            lock.node
-                .write_bytes(&pkt_set_enable_powersave_anim(false))
-                .map_err(|err| {
-                    warn!("rog_anime::run_animation:callback {}", err);
-                })
-                .ok();
-        }
-
-        // Loop rules:
-        // - Lock the mutex **only when required**. That is, the lock must be held for
-        //   the shortest duration possible.
-        // - An AtomicBool used for thread exit should be checked in every loop,
-        //   including nested
-
-        // The only reason for this outer thread is to prevent blocking while waiting
-        // for the next spawned thread to exit
-        // TODO: turn this in to async task (maybe? COuld still risk blocking main
-        // thread)
-        std::thread::Builder::new()
-            .name("AniMe system thread start".into())
-            .spawn(move || {
-                info!("AniMe new system thread started");
-                // Getting copies of these Atomics is done *in* the thread to ensure
-                // we don't block other threads/main
-                let thread_exit;
-                let thread_running;
-                let anime_type;
-                loop {
-                    if let Some(lock) = inner.try_lock() {
-                        thread_exit = lock.thread_exit.clone();
-                        thread_running = lock.thread_running.clone();
-                        anime_type = lock.anime_type;
-                        break;
-                    }
-                }
-                // First two loops are to ensure we *do* aquire a lock on the mutex
-                // The reason the loop is required is because the USB writes can block
-                // for up to 10ms. We can't fail to get the atomics.
-                while thread_running.load(Ordering::SeqCst) {
-                    // Make any running loop exit first
-                    thread_exit.store(true, Ordering::SeqCst);
-                }
-
-                info!("AniMe no previous system thread running (now)");
-                thread_exit.store(false, Ordering::SeqCst);
-                thread_running.store(true, Ordering::SeqCst);
-                'main: loop {
-                    for action in &actions {
-                        if thread_exit.load(Ordering::SeqCst) {
-                            break 'main;
-                        }
-                        match action {
-                            ActionData::Animation(frames) => {
-                                rog_anime::run_animation(frames, &|frame| {
-                                    if thread_exit.load(Ordering::Acquire) {
-                                        info!("rog-anime: animation sub-loop was asked to exit");
-                                        return Ok(true); // Do safe exit
-                                    }
-                                    inner
-                                        .try_lock()
-                                        .map(|lock| {
-                                            lock.write_data_buffer(frame)
-                                                .map_err(|err| {
-                                                    warn!(
-                                                        "rog_anime::run_animation:callback {}",
-                                                        err
-                                                    );
-                                                })
-                                                .ok();
-                                            false // Don't exit yet
-                                        })
-                                        .map_or_else(
-                                            || {
-                                                warn!("rog_anime::run_animation:callback failed");
-                                                Err(AnimeError::NoFrames)
-                                            },
-                                            Ok,
-                                        )
-                                });
-                                if thread_exit.load(Ordering::Acquire) {
-                                    info!("rog-anime: sub-loop exited and main loop exiting now");
-                                    break 'main;
-                                }
-                            }
-                            ActionData::Image(image) => {
-                                once = false;
-                                if let Some(lock) = inner.try_lock() {
-                                    lock.write_data_buffer(image.as_ref().clone())
-                                        .map_err(|e| error!("{}", e))
-                                        .ok();
-                                }
-                            }
-                            ActionData::Pause(duration) => sleep(*duration),
-                            ActionData::AudioEq
-                            | ActionData::SystemInfo
-                            | ActionData::TimeDate
-                            | ActionData::Matrix => {}
-                        }
-                    }
-                    if thread_exit.load(Ordering::SeqCst) {
-                        break 'main;
-                    }
-                    if once || actions.is_empty() {
-                        break 'main;
-                    }
-                }
-                // Clear the display on exit
-                if let Some(lock) = inner.try_lock() {
-                    if let Ok(data) =
-                        AnimeDataBuffer::from_vec(anime_type, vec![0u8; anime_type.data_length()])
-                            .map_err(|e| error!("{}", e))
-                    {
-                        lock.write_data_buffer(data)
-                            .map_err(|err| {
-                                warn!("rog_anime::run_animation:callback {}", err);
-                            })
-                            .ok();
-                    }
-                    lock.node
-                        .write_bytes(&pkt_set_enable_powersave_anim(
-                            lock.config.builtin_anims_enabled,
-                        ))
-                        .map_err(|err| {
-                            warn!("rog_anime::run_animation:callback {}", err);
-                        })
-                        .ok();
-                }
-                // Loop ended, set the atmonics
-                thread_running.store(false, Ordering::SeqCst);
-                info!("AniMe system thread exited");
-            })
-            .map(|err| info!("AniMe system thread: {:?}", err))
-            .ok();
-    }
-
-    /// Write only a data packet. This will modify the leds brightness using the
-    /// global brightness set in config.
-    fn write_data_buffer(&self, mut buffer: AnimeDataBuffer) -> Result<(), RogError> {
-        for led in buffer.data_mut().iter_mut() {
-            let mut bright = *led as f32;
-            if bright > 254.0 {
-                bright = 254.0;
-            }
-            *led = bright as u8;
-        }
-        let data = AnimePacketType::try_from(buffer)?;
-        for row in &data {
-            self.node.write_bytes(row)?;
-        }
-        self.node.write_bytes(&pkt_flush())?;
-        Ok(())
-    }
-
-    fn do_initialization(&self) -> Result<(), RogError> {
-        let pkts = pkts_for_init();
-        self.node.write_bytes(&pkts[0])?;
-        self.node.write_bytes(&pkts[1])?;
-        Ok(())
-    }
-}

asusd/src/ctrl_aura/controller.rs

@@ -1,520 +0,0 @@
-use std::collections::{BTreeMap, HashSet};
-
-use config_traits::{StdConfig, StdConfigLoad};
-use dmi_id::DMIID;
-use inotify::Inotify;
-use log::{debug, info, warn};
-use rog_aura::aura_detection::LedSupportData;
-use rog_aura::keyboard::{LedUsbPackets, UsbPackets};
-use rog_aura::usb::{LED_APPLY, LED_SET};
-use rog_aura::{
-    AuraDeviceType, AuraEffect, Direction, LedBrightness, Speed, GRADIENT, LED_MSG_LEN,
-};
-use rog_platform::hid_raw::HidRaw;
-use rog_platform::keyboard_led::KeyboardBacklight;
-use zbus::zvariant::OwnedObjectPath;
-
-use super::config::AuraConfig;
-use crate::ctrl_aura::manager::{dbus_path_for_dev, dbus_path_for_tuf};
-use crate::error::RogError;
-
-#[derive(Debug)]
-pub enum LEDNode {
-    /// Brightness and/or TUF RGB controls
-    KbdLed(KeyboardBacklight),
-    /// Raw HID handle
-    Rog(Option<KeyboardBacklight>, HidRaw),
-}
-
-impl LEDNode {
-    // TODO: move various methods upwards to this
-    pub fn set_brightness(&self, value: u8) -> Result<(), RogError> {
-        match self {
-            LEDNode::KbdLed(k) => k.set_brightness(value)?,
-            LEDNode::Rog(k, _) => {
-                if let Some(k) = k {
-                    k.set_brightness(value)?
-                } else {
-                    debug!("No brightness control found");
-                }
-            }
-        }
-        Ok(())
-    }
-
-    pub fn get_brightness(&self) -> Result<u8, RogError> {
-        Ok(match self {
-            LEDNode::KbdLed(k) => k.get_brightness()?,
-            LEDNode::Rog(k, _) => {
-                if let Some(k) = k {
-                    k.get_brightness()?
-                } else {
-                    debug!("No brightness control found");
-                    return Err(RogError::MissingFunction(
-                        "No keyboard brightness control found".to_string(),
-                    ));
-                }
-            }
-        })
-    }
-
-    pub fn monitor_brightness(&self) -> Result<Inotify, RogError> {
-        Ok(match self {
-            LEDNode::KbdLed(k) => k.monitor_brightness()?,
-            LEDNode::Rog(k, _) => {
-                if let Some(k) = k {
-                    k.monitor_brightness()?
-                } else {
-                    debug!("No brightness control found");
-                    return Err(RogError::MissingFunction(
-                        "No keyboard brightness control found".to_string(),
-                    ));
-                }
-            }
-        })
-    }
-
-    pub fn has_brightness_control(&self) -> bool {
-        match self {
-            LEDNode::KbdLed(k) => k.has_brightness(),
-            LEDNode::Rog(k, _) => {
-                if let Some(k) = k {
-                    k.has_brightness()
-                } else {
-                    false
-                }
-            }
-        }
-    }
-}
-
-/// Individual controller for one Aura device
-pub struct CtrlKbdLed {
-    pub led_type: AuraDeviceType,
-    pub led_node: LEDNode,
-    pub supported_data: LedSupportData, // TODO: is storing this really required?
-    pub per_key_mode_active: bool,
-    pub config: AuraConfig,
-    pub dbus_path: OwnedObjectPath,
-}
-
-impl CtrlKbdLed {
-    pub fn find_all() -> Result<Vec<Self>, RogError> {
-        info!("Searching for all Aura devices");
-        let mut devices = Vec::new();
-        let mut found = HashSet::new(); // track and ensure we use only one hidraw per prod_id
-
-        let mut enumerator = udev::Enumerator::new().map_err(|err| {
-            warn!("{}", err);
-            err
-        })?;
-
-        enumerator.match_subsystem("hidraw").map_err(|err| {
-            warn!("{}", err);
-            err
-        })?;
-
-        for end_point in enumerator.scan_devices()? {
-            // usb_device gives us a product and vendor ID
-            if let Some(usb_device) =
-                end_point.parent_with_subsystem_devtype("usb", "usb_device")?
-            {
-                // The asus_wmi driver latches MCU that controls the USB endpoints
-                if let Some(parent) = end_point.parent() {
-                    if let Some(driver) = parent.driver() {
-                        // There is a tree of devices added so filter by driver
-                        if driver != "asus" {
-                            continue;
-                        }
-                    } else {
-                        continue;
-                    }
-                }
-                // Device is something like 002, while its parent is the MCU
-                // Think of it like the device is an endpoint of the USB device attached
-                let mut prod_id = String::new();
-                if let Some(usb_id) = usb_device.attribute_value("idProduct") {
-                    prod_id = usb_id.to_string_lossy().to_string();
-                    let aura_dev = AuraDeviceType::from(prod_id.as_str());
-                    if aura_dev == AuraDeviceType::Unknown || found.contains(&aura_dev) {
-                        log::debug!("Unknown or invalid device: {usb_id:?}, skipping");
-                        continue;
-                    }
-                    found.insert(aura_dev);
-                }
-
-                let dev_node = if let Some(dev_node) = usb_device.devnode() {
-                    dev_node
-                } else {
-                    debug!("Device has no devnode, skipping");
-                    continue;
-                };
-                info!("AuraControl found device at: {:?}", dev_node);
-                let dbus_path = dbus_path_for_dev(&usb_device).unwrap_or_default();
-                let dev = HidRaw::from_device(end_point)?;
-                let mut dev = Self::from_hidraw(dev, dbus_path)?;
-                dev.config = Self::init_config(&prod_id);
-                devices.push(dev);
-            }
-        }
-
-        // Check for a TUF laptop LED. Assume there is only ever one.
-        if let Ok(kbd_backlight) = KeyboardBacklight::new() {
-            if kbd_backlight.has_kbd_rgb_mode() {
-                // Extra sure double-check that this isn't a laptop with crap
-                // ACPI with borked return on the TUF rgb methods
-                let dmi = DMIID::new().unwrap_or_default();
-                info!("Found a TUF with product family: {}", dmi.product_family);
-                info!("and board name: {}", dmi.board_name);
-
-                if dmi.product_family.contains("TUF") {
-                    info!("AuraControl found a TUF laptop keyboard");
-                    let ctrl = CtrlKbdLed {
-                        led_type: AuraDeviceType::LaptopTuf,
-                        led_node: LEDNode::KbdLed(kbd_backlight),
-                        supported_data: LedSupportData::get_data("tuf"),
-                        per_key_mode_active: false,
-                        config: Self::init_config("tuf"),
-                        dbus_path: dbus_path_for_tuf(),
-                    };
-                    devices.push(ctrl);
-                }
-            }
-        } else {
-            let dmi = DMIID::new().unwrap_or_default();
-            warn!("No asus::kbd_backlight found for {} ??", dmi.product_family);
-        }
-
-        info!("Found {} Aura devices", devices.len());
-
-        Ok(devices)
-    }
-
-    /// The generated data from this function has a default config. This config
-    /// should be overwritten. The reason for the default config is because
-    /// of async issues between this and udev/hidraw
-    pub fn from_hidraw(device: HidRaw, dbus_path: OwnedObjectPath) -> Result<Self, RogError> {
-        let rgb_led = KeyboardBacklight::new()
-            .map_err(|e| {
-                log::error!(
-                    "{} is missing a keyboard backlight brightness control: {e:?}",
-                    device.prod_id()
-                );
-            })
-            .ok();
-        let prod_id = AuraDeviceType::from(device.prod_id());
-        if prod_id == AuraDeviceType::Unknown {
-            log::error!("{} is AuraDevice::Unknown", device.prod_id());
-            return Err(RogError::NoAuraNode);
-        }
-
-        // New loads data from the DB also
-        // let config = Self::init_config(prod_id, data);
-
-        let data = LedSupportData::get_data(device.prod_id());
-        let ctrl = CtrlKbdLed {
-            led_type: prod_id,
-            led_node: LEDNode::Rog(rgb_led, device),
-            supported_data: data.clone(),
-            per_key_mode_active: false,
-            config: AuraConfig::default(),
-            dbus_path,
-        };
-        Ok(ctrl)
-    }
-
-    pub fn init_config(prod_id: &str) -> AuraConfig {
-        // New loads data from the DB also
-        let mut config_init = AuraConfig::new(prod_id);
-        // config_init.set_filename(prod_id);
-        let mut config_loaded = config_init.clone().load();
-        // update the initialised data with what we loaded from disk
-        for mode in &mut config_init.builtins {
-            // update init values from loaded values if they exist
-            if let Some(loaded) = config_loaded.builtins.get(mode.0) {
-                *mode.1 = loaded.clone();
-            }
-        }
-        // Then replace just incase the initialised data contains new modes added
-        config_loaded.builtins = config_init.builtins;
-
-        if let (Some(mut multizone_init), Some(multizone_loaded)) =
-            (config_init.multizone, config_loaded.multizone.as_mut())
-        {
-            for mode in multizone_init.iter_mut() {
-                // update init values from loaded values if they exist
-                if let Some(loaded) = multizone_loaded.get(mode.0) {
-                    let mut new_set = Vec::new();
-                    let data = LedSupportData::get_data(prod_id);
-                    // only reuse a zone mode if the mode is supported
-                    for mode in loaded {
-                        if data.basic_modes.contains(&mode.mode) {
-                            new_set.push(mode.clone());
-                        }
-                    }
-                    *mode.1 = new_set;
-                }
-            }
-            *multizone_loaded = multizone_init;
-        }
-
-        config_loaded
-    }
-
-    /// Set combination state for boot animation/sleep animation/all leds/keys
-    /// leds/side leds LED active
-    pub(super) fn set_power_states(&mut self) -> Result<(), RogError> {
-        if let LEDNode::KbdLed(_platform) = &mut self.led_node {
-            // TODO: tuf bool array
-            // if let Some(pwr) =
-            // AuraPowerConfig::to_tuf_bool_array(&self.config.enabled) {
-            //     let buf = [1, pwr[1] as u8, pwr[2] as u8, pwr[3] as u8,
-            // pwr[4] as u8];     platform.set_kbd_rgb_state(&buf)?;
-            // }
-        } else if let LEDNode::Rog(_, hid_raw) = &self.led_node {
-            let bytes = self.config.enabled.to_bytes(self.led_type);
-            let message = [0x5d, 0xbd, 0x01, bytes[0], bytes[1], bytes[2], bytes[3]];
-
-            hid_raw.write_bytes(&message)?;
-            hid_raw.write_bytes(&LED_SET)?;
-            // Changes won't persist unless apply is set
-            hid_raw.write_bytes(&LED_APPLY)?;
-        }
-        Ok(())
-    }
-
-    /// Write an effect block. This is for per-key, but can be repurposed to
-    /// write the raw factory mode packets - when doing this it is expected that
-    /// only the first `Vec` (`effect[0]`) is valid.
-    pub fn write_effect_block(&mut self, effect: &UsbPackets) -> Result<(), RogError> {
-        if self.config.brightness == LedBrightness::Off {
-            self.config.brightness = LedBrightness::Med;
-            self.config.write();
-        }
-
-        let pkt_type = effect[0][1];
-        const PER_KEY_TYPE: u8 = 0xbc;
-
-        if pkt_type != PER_KEY_TYPE {
-            self.per_key_mode_active = false;
-            if let LEDNode::Rog(_, hid_raw) = &self.led_node {
-                hid_raw.write_bytes(&effect[0])?;
-                hid_raw.write_bytes(&LED_SET)?;
-                // hid_raw.write_bytes(&LED_APPLY)?;
-            }
-        } else {
-            if !self.per_key_mode_active {
-                if let LEDNode::Rog(_, hid_raw) = &self.led_node {
-                    let init = LedUsbPackets::get_init_msg();
-                    hid_raw.write_bytes(&init)?;
-                }
-                self.per_key_mode_active = true;
-            }
-            if let LEDNode::Rog(_, hid_raw) = &self.led_node {
-                for row in effect.iter() {
-                    hid_raw.write_bytes(row)?;
-                }
-            } else if let LEDNode::KbdLed(tuf) = &self.led_node {
-                for row in effect.iter() {
-                    let r = row[9];
-                    let g = row[10];
-                    let b = row[11];
-                    tuf.set_kbd_rgb_mode(&[0, 0, r, g, b, 0])?;
-                }
-            }
-        }
-        Ok(())
-    }
-
-    pub fn write_mode(&mut self, mode: &AuraEffect) -> Result<(), RogError> {
-        if let LEDNode::KbdLed(platform) = &self.led_node {
-            let buf = [
-                1,
-                mode.mode as u8,
-                mode.colour1.r,
-                mode.colour1.g,
-                mode.colour1.b,
-                mode.speed as u8,
-            ];
-            platform.set_kbd_rgb_mode(&buf)?;
-        } else if let LEDNode::Rog(_, hid_raw) = &self.led_node {
-            let bytes: [u8; LED_MSG_LEN] = mode.into();
-            hid_raw.write_bytes(&bytes)?;
-            hid_raw.write_bytes(&LED_SET)?;
-            // Changes won't persist unless apply is set
-            hid_raw.write_bytes(&LED_APPLY)?;
-        } else {
-            return Err(RogError::NoAuraKeyboard);
-        }
-        self.per_key_mode_active = false;
-        Ok(())
-    }
-
-    pub(super) fn write_current_config_mode(&mut self) -> Result<(), RogError> {
-        if self.config.multizone_on {
-            let mode = self.config.current_mode;
-            let mut create = false;
-            // There is no multizone config for this mode so create one here
-            // using the colours of rainbow if it exists, or first available
-            // mode, or random
-            if self.config.multizone.is_none() {
-                create = true;
-            } else if let Some(multizones) = self.config.multizone.as_ref() {
-                if !multizones.contains_key(&mode) {
-                    create = true;
-                }
-            }
-            if create {
-                info!("No user-set config for zone founding, attempting a default");
-                self.create_multizone_default()?;
-            }
-
-            if let Some(multizones) = self.config.multizone.as_mut() {
-                if let Some(set) = multizones.get(&mode) {
-                    for mode in set.clone() {
-                        self.write_mode(&mode)?;
-                    }
-                }
-            }
-        } else {
-            let mode = self.config.current_mode;
-            if let Some(effect) = self.config.builtins.get(&mode).cloned() {
-                self.write_mode(&effect)?;
-            }
-        }
-
-        Ok(())
-    }
-
-    /// Create a default for the `current_mode` if multizone and no config
-    /// exists.
-    fn create_multizone_default(&mut self) -> Result<(), RogError> {
-        let mut default = vec![];
-        for (i, tmp) in self.supported_data.basic_zones.iter().enumerate() {
-            default.push(AuraEffect {
-                mode: self.config.current_mode,
-                zone: *tmp,
-                colour1: *GRADIENT.get(i).unwrap_or(&GRADIENT[0]),
-                colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
-                speed: Speed::Med,
-                direction: Direction::Left,
-            });
-        }
-        if default.is_empty() {
-            return Err(RogError::AuraEffectNotSupported);
-        }
-
-        if let Some(multizones) = self.config.multizone.as_mut() {
-            multizones.insert(self.config.current_mode, default);
-        } else {
-            let mut tmp = BTreeMap::new();
-            tmp.insert(self.config.current_mode, default);
-            self.config.multizone = Some(tmp);
-        }
-        Ok(())
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use rog_aura::aura_detection::LedSupportData;
-    use rog_aura::{AuraDeviceType, AuraModeNum, AuraZone, PowerZones};
-    use rog_platform::hid_raw::HidRaw;
-    use rog_platform::keyboard_led::KeyboardBacklight;
-    use zbus::zvariant::OwnedObjectPath;
-
-    use super::CtrlKbdLed;
-    use crate::ctrl_aura::config::AuraConfig;
-    use crate::ctrl_aura::controller::LEDNode;
-
-    #[test]
-    #[ignore = "Unable to run in CI as the HIDRAW device is required"]
-    fn create_multizone_if_no_config() {
-        // Checking to ensure set_mode errors when unsupported modes are tried
-        let config = AuraConfig::new("19b6");
-        let supported_basic_modes = LedSupportData {
-            device_name: String::new(),
-            product_id: String::new(),
-            layout_name: "ga401".to_owned(),
-            basic_modes: vec![AuraModeNum::Static],
-            basic_zones: vec![],
-            advanced_type: rog_aura::keyboard::AdvancedAuraType::None,
-            power_zones: vec![PowerZones::Keyboard, PowerZones::RearGlow],
-        };
-        let mut controller = CtrlKbdLed {
-            led_type: AuraDeviceType::LaptopPost2021,
-            led_node: LEDNode::Rog(
-                Some(KeyboardBacklight::default()),
-                HidRaw::new("19b6").unwrap(),
-            ),
-            supported_data: supported_basic_modes,
-            per_key_mode_active: false,
-            config,
-            dbus_path: OwnedObjectPath::default(),
-        };
-
-        assert!(controller.config.multizone.is_none());
-        assert!(controller.create_multizone_default().is_err());
-        assert!(controller.config.multizone.is_none());
-
-        controller.supported_data.basic_zones.push(AuraZone::Key1);
-        controller.supported_data.basic_zones.push(AuraZone::Key2);
-        assert!(controller.create_multizone_default().is_ok());
-        assert!(controller.config.multizone.is_some());
-
-        let m = controller.config.multizone.unwrap();
-        assert!(m.contains_key(&AuraModeNum::Static));
-        let e = m.get(&AuraModeNum::Static).unwrap();
-        assert_eq!(e.len(), 2);
-        assert_eq!(e[0].zone, AuraZone::Key1);
-        assert_eq!(e[1].zone, AuraZone::Key2);
-    }
-
-    #[test]
-    #[ignore = "Unable to run in CI as the HIDRAW device is required"]
-    // TODO: use sim device
-    fn next_mode_create_multizone_if_no_config() {
-        // Checking to ensure set_mode errors when unsupported modes are tried
-        let config = AuraConfig::new("19b6");
-        let supported_basic_modes = LedSupportData {
-            device_name: String::new(),
-            product_id: String::new(),
-            layout_name: "ga401".to_owned(),
-            basic_modes: vec![AuraModeNum::Static],
-            basic_zones: vec![AuraZone::Key1, AuraZone::Key2],
-            advanced_type: rog_aura::keyboard::AdvancedAuraType::None,
-            power_zones: vec![PowerZones::Keyboard, PowerZones::RearGlow],
-        };
-        let mut controller = CtrlKbdLed {
-            led_type: AuraDeviceType::LaptopPost2021,
-            led_node: LEDNode::Rog(
-                Some(KeyboardBacklight::default()),
-                HidRaw::new("19b6").unwrap(),
-            ),
-            supported_data: supported_basic_modes,
-            per_key_mode_active: false,
-            config,
-            dbus_path: OwnedObjectPath::default(),
-        };
-
-        assert!(controller.config.multizone.is_none());
-        controller.config.multizone_on = true;
-        // This is called in toggle_mode. It will error here because we have no
-        // keyboard node in tests.
-        assert_eq!(
-            controller
-                .write_current_config_mode()
-                .unwrap_err()
-                .to_string(),
-            "No supported Aura keyboard"
-        );
-        assert!(controller.config.multizone.is_some());
-
-        let m = controller.config.multizone.unwrap();
-        assert!(m.contains_key(&AuraModeNum::Static));
-        let e = m.get(&AuraModeNum::Static).unwrap();
-        assert_eq!(e.len(), 2);
-        assert_eq!(e[0].zone, AuraZone::Key1);
-        assert_eq!(e[1].zone, AuraZone::Key2);
-    }
-}

asusd/src/ctrl_aura/manager.rs

@@ -1,187 +0,0 @@
-// Plan:
-// - Manager has udev monitor on USB looking for ROG devices
-// - If a device is found, add it to watch
-// - Add it to Zbus server
-// - If udev sees device removed then remove the zbus path
-
-use std::collections::HashSet;
-
-use log::{debug, error, info, warn};
-use mio::{Events, Interest, Poll, Token};
-use rog_aura::AuraDeviceType;
-use rog_platform::hid_raw::HidRaw;
-use tokio::task::spawn_blocking;
-use udev::{Device, MonitorBuilder};
-use zbus::object_server::SignalContext;
-use zbus::zvariant::{ObjectPath, OwnedObjectPath};
-use zbus::Connection;
-
-use crate::ctrl_aura::controller::CtrlKbdLed;
-use crate::ctrl_aura::trait_impls::{CtrlAuraZbus, AURA_ZBUS_PATH};
-use crate::error::RogError;
-use crate::{CtrlTask, Reloadable};
-
-pub struct AuraManager {
-    _connection: Connection,
-}
-
-impl AuraManager {
-    pub async fn new(connection: Connection) -> Result<Self, RogError> {
-        let conn_copy = connection.clone();
-        let mut interfaces = HashSet::new();
-
-        // Do the initial keyboard detection:
-        let all = CtrlKbdLed::find_all()?;
-        for ctrl in all {
-            let path = ctrl.dbus_path.clone();
-            interfaces.insert(path.clone()); // ensure we record the initial stuff
-            let sig_ctx = CtrlAuraZbus::signal_context(&connection)?;
-            let sig_ctx2 = sig_ctx.clone();
-            let zbus = CtrlAuraZbus::new(ctrl, sig_ctx);
-            start_tasks(zbus, connection.clone(), sig_ctx2, path).await?;
-        }
-
-        let manager = Self {
-            _connection: connection,
-        };
-
-        // detect all plugged in aura devices (eventually)
-        // only USB devices are detected for here
-        spawn_blocking(move || {
-            let mut monitor = MonitorBuilder::new()?.match_subsystem("hidraw")?.listen()?;
-            let mut poll = Poll::new()?;
-            let mut events = Events::with_capacity(1024);
-            poll.registry()
-                .register(&mut monitor, Token(0), Interest::READABLE)?;
-
-            loop {
-                if poll.poll(&mut events, None).is_err() {
-                    continue;
-                }
-                for event in monitor.iter() {
-                    let parent = if let Some(parent) =
-                        event.parent_with_subsystem_devtype("usb", "usb_device")?
-                    {
-                        parent
-                    } else {
-                        continue;
-                    };
-
-                    let action = if let Some(action) = event.action() {
-                        action
-                    } else {
-                        continue;
-                    };
-
-                    let id_product = if let Some(id_product) = parent.attribute_value("idProduct") {
-                        id_product.to_string_lossy()
-                    } else {
-                        continue;
-                    };
-
-                    let path = if let Some(path) = dbus_path_for_dev(&parent) {
-                        path
-                    } else {
-                        continue;
-                    };
-
-                    let aura_device = AuraDeviceType::from(&*id_product);
-                    if aura_device == AuraDeviceType::Unknown {
-                        warn!("idProduct:{id_product:?} is unknown, not using");
-                        continue;
-                    }
-
-                    if action == "remove" {
-                        if interfaces.remove(&path) {
-                            info!("AuraManager removing: {path:?}");
-                            let conn_copy = conn_copy.clone();
-                            tokio::spawn(async move {
-                                let res = conn_copy
-                                    .object_server()
-                                    .remove::<CtrlAuraZbus, _>(&path)
-                                    .await
-                                    .map_err(|e| {
-                                        error!("Failed to remove {path:?}, {e:?}");
-                                        e
-                                    })?;
-                                info!("AuraManager removed: {path:?}, {res}");
-                                Ok::<(), RogError>(())
-                            });
-                        }
-                    } else if action == "add" {
-                        if interfaces.contains(&path) {
-                            debug!("Already a ctrl at {path:?}");
-                            continue;
-                        }
-
-                        // Need to check the driver is asus to prevent using hid_generic
-                        if let Some(p2) = event.parent() {
-                            if let Some(driver) = p2.driver() {
-                                // There is a tree of devices added so filter by driver
-                                if driver != "asus" {
-                                    debug!("{id_product:?} driver was not asus, skipping");
-                                    continue;
-                                }
-                            } else {
-                                continue;
-                            }
-                        }
-
-                        if let Some(dev_node) = event.devnode() {
-                            if let Ok(raw) = HidRaw::from_device(event.device())
-                                .map_err(|e| error!("device path error: {e:?}"))
-                            {
-                                if let Ok(mut ctrl) = CtrlKbdLed::from_hidraw(raw, path.clone()) {
-                                    ctrl.config = CtrlKbdLed::init_config(&id_product);
-                                    interfaces.insert(path.clone());
-                                    info!("AuraManager starting device at: {dev_node:?}, {path:?}");
-                                    let sig_ctx = CtrlAuraZbus::signal_context(&conn_copy)?;
-                                    let zbus = CtrlAuraZbus::new(ctrl, sig_ctx);
-                                    let sig_ctx = CtrlAuraZbus::signal_context(&conn_copy)?;
-                                    let conn_copy = conn_copy.clone();
-                                    tokio::spawn(async move {
-                                        start_tasks(zbus, conn_copy.clone(), sig_ctx, path).await
-                                    });
-                                }
-                            }
-                        }
-                    };
-                }
-            }
-            // Required for return type on spawn
-            #[allow(unreachable_code)]
-            Ok::<(), RogError>(())
-        });
-        Ok(manager)
-    }
-}
-
-pub(crate) fn dbus_path_for_dev(parent: &Device) -> Option<OwnedObjectPath> {
-    if let Some(filename) = super::filename_partial(parent) {
-        return Some(
-            ObjectPath::from_str_unchecked(&format!("{AURA_ZBUS_PATH}/{filename}")).into(),
-        );
-    }
-    None
-}
-
-pub(crate) fn dbus_path_for_tuf() -> OwnedObjectPath {
-    ObjectPath::from_str_unchecked(&format!("{AURA_ZBUS_PATH}/tuf")).into()
-}
-
-async fn start_tasks(
-    mut zbus: CtrlAuraZbus,
-    connection: Connection,
-    _signal_ctx: SignalContext<'static>,
-    path: OwnedObjectPath,
-) -> Result<(), RogError> {
-    // let task = zbus.clone();
-    // let signal_ctx = signal_ctx.clone();
-    zbus.reload()
-        .await
-        .unwrap_or_else(|err| warn!("Controller error: {}", err));
-    connection.object_server().at(path, zbus).await.unwrap();
-    // TODO: skip this until we keep handles to tasks so they can be killed
-    // task.create_tasks(signal_ctx).await
-    Ok(())
-}

asusd/src/ctrl_aura/mod.rs

@@ -1,29 +0,0 @@
-use udev::Device;
-use zbus::zvariant::{ObjectPath, OwnedObjectPath};
-
-pub mod config;
-pub mod controller;
-pub mod manager;
-/// Implements `CtrlTask`, `Reloadable`, `ZbusRun`
-pub mod trait_impls;
-
-/// Returns only the Device details concatenated in a form usable for
-/// adding/appending to a filename
-pub(super) fn filename_partial(parent: &Device) -> Option<OwnedObjectPath> {
-    if let Some(id_product) = parent.attribute_value("idProduct") {
-        let id_product = id_product.to_string_lossy();
-        let path = if let Some(devnum) = parent.attribute_value("devnum") {
-            let devnum = devnum.to_string_lossy();
-            if let Some(devpath) = parent.attribute_value("devpath") {
-                let devpath = devpath.to_string_lossy();
-                format!("{id_product}_{devnum}_{devpath}")
-            } else {
-                format!("{id_product}_{devnum}")
-            }
-        } else {
-            format!("{id_product}")
-        };
-        return Some(ObjectPath::from_str_unchecked(&path).into());
-    }
-    None
-}

asusd/src/ctrl_aura/trait_impls.rs

@@ -1,303 +0,0 @@
-use std::collections::BTreeMap;
-use std::sync::Arc;
-
-use config_traits::StdConfig;
-use log::{debug, error, info, warn};
-use rog_aura::keyboard::{LaptopAuraPower, UsbPackets};
-use rog_aura::{AuraDeviceType, AuraEffect, AuraModeNum, AuraZone, LedBrightness, PowerZones};
-use zbus::export::futures_util::lock::{Mutex, MutexGuard};
-use zbus::export::futures_util::StreamExt;
-use zbus::fdo::Error as ZbErr;
-use zbus::{interface, SignalContext};
-
-use super::controller::CtrlKbdLed;
-use crate::error::RogError;
-use crate::CtrlTask;
-
-pub const AURA_ZBUS_NAME: &str = "Aura";
-pub const AURA_ZBUS_PATH: &str = "/org/asuslinux";
-
-#[derive(Clone)]
-pub struct CtrlAuraZbus(Arc<Mutex<CtrlKbdLed>>, SignalContext<'static>);
-
-impl CtrlAuraZbus {
-    pub fn new(controller: CtrlKbdLed, signal: SignalContext<'static>) -> Self {
-        Self(Arc::new(Mutex::new(controller)), signal)
-    }
-
-    fn update_config(lock: &mut CtrlKbdLed) -> Result<(), RogError> {
-        let bright = lock.led_node.get_brightness().unwrap_or_default();
-        lock.config.read();
-        lock.config.brightness = bright.into();
-        lock.config.write();
-        Ok(())
-    }
-}
-
-/// The main interface for changing, reading, or notfying
-///
-/// LED commands are split between Brightness, Modes, Per-Key
-#[interface(name = "org.asuslinux.Aura")]
-impl CtrlAuraZbus {
-    /// Return the device type for this Aura keyboard
-    #[zbus(property)]
-    async fn device_type(&self) -> AuraDeviceType {
-        let ctrl = self.0.lock().await;
-        ctrl.led_type
-    }
-
-    /// Return the current LED brightness
-    #[zbus(property)]
-    async fn brightness(&self) -> Result<LedBrightness, ZbErr> {
-        let ctrl = self.0.lock().await;
-        Ok(ctrl.led_node.get_brightness().map(|n| n.into())?)
-    }
-
-    /// Set the keyboard brightness level (0-3)
-    #[zbus(property)]
-    async fn set_brightness(&mut self, brightness: LedBrightness) -> Result<(), ZbErr> {
-        let ctrl = self.0.lock().await;
-        Ok(ctrl.led_node.set_brightness(brightness.into())?)
-    }
-
-    /// Total levels of brightness available
-    #[zbus(property)]
-    async fn supported_brightness(&self) -> Vec<LedBrightness> {
-        vec![
-            LedBrightness::Off,
-            LedBrightness::Low,
-            LedBrightness::Med,
-            LedBrightness::High,
-        ]
-    }
-
-    /// The total available modes
-    #[zbus(property)]
-    async fn supported_basic_modes(&self) -> Result<Vec<AuraModeNum>, ZbErr> {
-        let ctrl = self.0.lock().await;
-        Ok(ctrl.config.builtins.keys().cloned().collect())
-    }
-
-    #[zbus(property)]
-    async fn supported_basic_zones(&self) -> Result<Vec<AuraZone>, ZbErr> {
-        let ctrl = self.0.lock().await;
-        Ok(ctrl.supported_data.basic_zones.clone())
-    }
-
-    #[zbus(property)]
-    async fn supported_power_zones(&self) -> Result<Vec<PowerZones>, ZbErr> {
-        let ctrl = self.0.lock().await;
-        Ok(ctrl.supported_data.power_zones.clone())
-    }
-
-    /// The current mode data
-    #[zbus(property)]
-    async fn led_mode(&self) -> Result<AuraModeNum, ZbErr> {
-        let ctrl = self.0.lock().await;
-        Ok(ctrl.config.current_mode)
-    }
-
-    /// Set an Aura effect if the effect mode or zone is supported.
-    ///
-    /// On success the aura config file is read to refresh cached values, then
-    /// the effect is stored and config written to disk.
-    #[zbus(property)]
-    async fn set_led_mode(&mut self, num: AuraModeNum) -> Result<(), ZbErr> {
-        let mut ctrl = self.0.lock().await;
-        ctrl.config.current_mode = num;
-        ctrl.write_current_config_mode()?;
-        if ctrl.config.brightness == LedBrightness::Off {
-            ctrl.config.brightness = LedBrightness::Med;
-        }
-        if ctrl.led_node.has_brightness_control() {
-            ctrl.led_node
-                .set_brightness(ctrl.config.brightness.into())?;
-        }
-        ctrl.config.write();
-
-        self.led_mode_data_invalidate(&self.1).await.ok();
-        Ok(())
-    }
-
-    /// The current mode data
-    #[zbus(property)]
-    async fn led_mode_data(&self) -> Result<AuraEffect, ZbErr> {
-        let ctrl = self.0.lock().await;
-        let mode = ctrl.config.current_mode;
-        match ctrl.config.builtins.get(&mode) {
-            Some(effect) => Ok(effect.clone()),
-            None => Err(ZbErr::Failed("Could not get the current effect".into())),
-        }
-    }
-
-    /// Set an Aura effect if the effect mode or zone is supported.
-    ///
-    /// On success the aura config file is read to refresh cached values, then
-    /// the effect is stored and config written to disk.
-    #[zbus(property)]
-    async fn set_led_mode_data(&mut self, effect: AuraEffect) -> Result<(), ZbErr> {
-        let mut ctrl = self.0.lock().await;
-        if !ctrl.supported_data.basic_modes.contains(&effect.mode)
-            || effect.zone != AuraZone::None
-                && !ctrl.supported_data.basic_zones.contains(&effect.zone)
-        {
-            return Err(ZbErr::NotSupported(format!(
-                "The Aura effect is not supported: {effect:?}"
-            )));
-        }
-
-        ctrl.write_mode(&effect)?;
-        if ctrl.config.brightness == LedBrightness::Off {
-            ctrl.config.brightness = LedBrightness::Med;
-        }
-        if ctrl.led_node.has_brightness_control() {
-            ctrl.led_node
-                .set_brightness(ctrl.config.brightness.into())?;
-        }
-        ctrl.config.set_builtin(effect);
-        ctrl.config.write();
-
-        self.led_mode_invalidate(&self.1).await.ok();
-        Ok(())
-    }
-
-    /// Get the data set for every mode available
-    async fn all_mode_data(&self) -> BTreeMap<AuraModeNum, AuraEffect> {
-        let ctrl = self.0.lock().await;
-        ctrl.config.builtins.clone()
-    }
-
-    // As property doesn't work for AuraPowerDev (complexity of serialization?)
-    #[zbus(property)]
-    async fn led_power(&self) -> LaptopAuraPower {
-        let ctrl = self.0.lock().await;
-        ctrl.config.enabled.clone()
-    }
-
-    /// Set a variety of states, input is array of enum.
-    /// `enabled` sets if the sent array should be disabled or enabled
-    ///
-    /// For Modern ROG devices the "enabled" flag is ignored.
-    #[zbus(property)]
-    async fn set_led_power(&mut self, options: LaptopAuraPower) -> Result<(), ZbErr> {
-        let mut ctrl = self.0.lock().await;
-        for opt in options.states {
-            let zone = opt.zone;
-            for config in ctrl.config.enabled.states.iter_mut() {
-                if config.zone == zone {
-                    *config = opt;
-                }
-            }
-        }
-        ctrl.config.write();
-        Ok(ctrl.set_power_states().map_err(|e| {
-            warn!("{}", e);
-            e
-        })?)
-    }
-
-    /// On machine that have some form of either per-key keyboard or per-zone
-    /// this can be used to write custom effects over dbus. The input is a
-    /// nested `Vec<Vec<8>>` where `Vec<u8>` is a raw USB packet
-    async fn direct_addressing_raw(&self, data: UsbPackets) -> Result<(), ZbErr> {
-        let mut ctrl = self.0.lock().await;
-        ctrl.write_effect_block(&data)?;
-        Ok(())
-    }
-}
-
-impl CtrlTask for CtrlAuraZbus {
-    fn zbus_path() -> &'static str {
-        "/org/asuslinux"
-    }
-
-    async fn create_tasks(&self, _: SignalContext<'static>) -> Result<(), RogError> {
-        let load_save =
-            |start: bool, mut lock: MutexGuard<'_, CtrlKbdLed>| -> Result<(), RogError> {
-                // If waking up
-                if !start {
-                    info!("CtrlKbdLedTask reloading brightness and modes");
-                    if lock.led_node.has_brightness_control() {
-                        lock.led_node
-                            .set_brightness(lock.config.brightness.into())
-                            .map_err(|e| {
-                                error!("CtrlKbdLedTask: {e}");
-                                e
-                            })?;
-                    }
-                    lock.write_current_config_mode().map_err(|e| {
-                        error!("CtrlKbdLedTask: {e}");
-                        e
-                    })?;
-                } else if start {
-                    Self::update_config(&mut lock).map_err(|e| {
-                        error!("CtrlKbdLedTask: {e}");
-                        e
-                    })?;
-                }
-                Ok(())
-            };
-
-        let inner1 = self.0.clone();
-        let inner3 = self.0.clone();
-        self.create_sys_event_tasks(
-            move |sleeping| {
-                let inner1 = inner1.clone();
-                async move {
-                    let lock = inner1.lock().await;
-                    load_save(sleeping, lock).unwrap(); // unwrap as we want to
-                                                        // bomb out of the task
-                }
-            },
-            move |_shutting_down| {
-                let inner3 = inner3.clone();
-                async move {
-                    let lock = inner3.lock().await;
-                    load_save(false, lock).unwrap(); // unwrap as we want to
-                                                     // bomb out of the task
-                }
-            },
-            move |_lid_closed| {
-                // on lid change
-                async move {}
-            },
-            move |_power_plugged| {
-                // power change
-                async move {}
-            },
-        )
-        .await;
-
-        let ctrl2 = self.0.clone();
-        let ctrl = self.0.lock().await;
-        if ctrl.led_node.has_brightness_control() {
-            let watch = ctrl.led_node.monitor_brightness()?;
-            tokio::spawn(async move {
-                let mut buffer = [0; 32];
-                watch
-                    .into_event_stream(&mut buffer)
-                    .unwrap()
-                    .for_each(|_| async {
-                        if let Some(lock) = ctrl2.try_lock() {
-                            load_save(true, lock).unwrap(); // unwrap as we want to
-                                                            // bomb out of the task
-                        }
-                    })
-                    .await;
-            });
-        }
-
-        Ok(())
-    }
-}
-
-impl crate::Reloadable for CtrlAuraZbus {
-    async fn reload(&mut self) -> Result<(), RogError> {
-        let mut ctrl = self.0.lock().await;
-        debug!("reloading keyboard mode");
-        ctrl.write_current_config_mode()?;
-        debug!("reloading power states");
-        ctrl.set_power_states().map_err(|err| warn!("{err}")).ok();
-        Ok(())
-    }
-}

asusd/src/ctrl_backlight.rs

@@ -0,0 +1,348 @@
+use std::sync::Arc;
+use std::time::Duration;
+
+use config_traits::StdConfig;
+use log::{info, warn};
+use rog_platform::backlight::{Backlight, BacklightType};
+use tokio::sync::Mutex;
+use zbus::fdo::Error as FdoErr;
+use zbus::object_server::SignalEmitter;
+use zbus::{interface, Connection};
+
+use crate::config::Config;
+use crate::error::RogError;
+use crate::ASUS_ZBUS_PATH;
+
+#[derive(Clone)]
+pub struct CtrlBacklight {
+    backlights: Vec<Backlight>,
+    config: Arc<Mutex<Config>>,
+}
+
+impl CtrlBacklight {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        let mut backlights = Vec::new();
+
+        if let Ok(primary) = Backlight::new(BacklightType::Primary) {
+            info!("Found primary display backlight");
+            backlights.push(primary);
+        }
+
+        if let Ok(screenpad) = Backlight::new(BacklightType::Screenpad) {
+            info!("Found screenpad backlight");
+            backlights.push(screenpad);
+        }
+
+        if backlights.is_empty() {
+            return Err(RogError::MissingFunction("No backlights found".into()));
+        }
+
+        Ok(Self { backlights, config })
+    }
+
+    fn get_backlight(&self, device_type: &BacklightType) -> Option<&Backlight> {
+        self.backlights
+            .iter()
+            .find(|b| b.device_type() == device_type)
+    }
+
+    async fn set_brightness_with_sync(
+        &self,
+        device_type: &BacklightType,
+        level: i32,
+    ) -> Result<(), FdoErr> {
+        let sync = self
+            .config
+            .lock()
+            .await
+            .screenpad_sync_primary
+            .unwrap_or_default();
+
+        // If sync is enabled and we're setting screenpad brightness, set primary first
+        if sync && *device_type == BacklightType::Screenpad {
+            if let Some(primary) = self.get_backlight(&BacklightType::Primary) {
+                if let Ok(primary_max) = primary.get_max_brightness() {
+                    let primary_scaled = level * primary_max / 100;
+                    let _ = primary.set_brightness(primary_scaled);
+                }
+            }
+        }
+
+        if let Some(backlight) = self.get_backlight(device_type) {
+            let max = backlight.get_max_brightness().map_err(|e| {
+                warn!("Failed to get max brightness: {}", e);
+                FdoErr::Failed(format!("Failed to get max brightness: {}", e))
+            })?;
+
+            let gamma = self.config.lock().await.screenpad_gamma.unwrap_or(1.0);
+            let scaled = if *device_type == BacklightType::Screenpad {
+                // Apply non-linear scaling with the configurable gamma value only for Screenpad
+                let normalized_level = level as f32 / 100.0;
+                let gamma_corrected = normalized_level.powf(gamma);
+                (gamma_corrected * max as f32) as i32
+            } else {
+                // Linear scaling for other devices
+                level * max / 100
+            };
+
+            backlight.set_brightness(scaled).map_err(|e| {
+                warn!("Failed to set brightness: {}", e);
+                FdoErr::Failed(format!("Failed to set brightness: {}", e))
+            })?;
+
+            // If sync is enabled and we're setting primary brightness, set screenpad
+            // afterward
+            if sync && *device_type == BacklightType::Primary {
+                for other in self
+                    .backlights
+                    .iter()
+                    .filter(|b| b.device_type() != device_type)
+                {
+                    if let Ok(other_max) = other.get_max_brightness() {
+                        let other_scaled = if other.device_type() == &BacklightType::Screenpad {
+                            // Apply gamma only to Screenpad
+                            let normalized_level = level as f32 / 100.0;
+                            let gamma_corrected = normalized_level.powf(gamma);
+                            (gamma_corrected * other_max as f32) as i32
+                        } else {
+                            // Linear scaling for other devices
+                            level * other_max / 100
+                        };
+                        let _ = other.set_brightness(other_scaled);
+                    }
+                }
+            }
+
+            Ok(())
+        } else {
+            Err(FdoErr::NotSupported(format!(
+                "Backlight {:?} not found",
+                device_type
+            )))
+        }
+    }
+
+    async fn get_brightness_percent(&self, device_type: &BacklightType) -> Result<i32, FdoErr> {
+        if let Some(backlight) = self.get_backlight(device_type) {
+            let brightness = backlight.get_brightness().map_err(|e| {
+                warn!("Failed to get brightness: {}", e);
+                FdoErr::Failed(format!("Failed to get brightness: {}", e))
+            })?;
+
+            let max = backlight.get_max_brightness().map_err(|e| {
+                warn!("Failed to get max brightness: {}", e);
+                FdoErr::Failed(format!("Failed to get max brightness: {}", e))
+            })?;
+
+            if *device_type == BacklightType::Screenpad {
+                let gamma = self.config.lock().await.screenpad_gamma.unwrap_or(1.0);
+                let normalized = brightness as f32 / max as f32;
+                let corrected = normalized.powf(1.0 / gamma);
+                Ok((corrected * 100.0).round() as i32)
+            } else {
+                Ok(brightness * 100 / max)
+            }
+        } else {
+            Err(FdoErr::NotSupported(format!(
+                "Backlight {:?} not found",
+                device_type
+            )))
+        }
+    }
+
+    pub async fn start_watch_primary(&self) -> Result<(), RogError> {
+        if self.get_backlight(&BacklightType::Screenpad).is_none() {
+            return Ok(());
+        }
+
+        if let Some(sync) = self.config.lock().await.screenpad_sync_primary {
+            if !sync {
+                return Ok(());
+            }
+        }
+
+        if let Some(backlight) = self.get_backlight(&BacklightType::Primary) {
+            let watch = backlight.monitor_brightness()?;
+
+            let backlights = self.clone();
+            tokio::spawn(async move {
+                let mut last_level = 0;
+                let mut buffer = [0; 32];
+                use futures_lite::StreamExt;
+                if let Ok(mut stream) = watch.into_event_stream(&mut buffer) {
+                    loop {
+                        let _ = stream.next().await;
+
+                        let sync = backlights.config.lock().await.screenpad_sync_primary;
+                        if let Some(sync) = sync {
+                            if !sync {
+                                continue;
+                            }
+                        } else if backlights
+                            .config
+                            .lock()
+                            .await
+                            .screenpad_sync_primary
+                            .is_none()
+                        {
+                            continue;
+                        }
+
+                        let level = backlights
+                            .get_brightness_percent(&BacklightType::Primary)
+                            .await
+                            .unwrap_or(60);
+                        if last_level != level {
+                            last_level = level;
+                            backlights
+                                .set_brightness_with_sync(&BacklightType::Screenpad, level)
+                                .await
+                                .ok();
+                        }
+
+                        // other processes cause "MODIFY" event and make this spin 100%, so sleep
+                        tokio::time::sleep(Duration::from_millis(300)).await;
+                    }
+                    // watch
+                    //     .into_event_stream(&mut buffer)
+                    //     .unwrap()
+                    //     .for_each(|_| async {})
+                    //     .await;
+                }
+            });
+        }
+
+        Ok(())
+    }
+}
+
+#[interface(name = "xyz.ljones.Backlight")]
+impl CtrlBacklight {
+    #[zbus(property)]
+    async fn screenpad_sync_with_primary(&self) -> bool {
+        self.config
+            .lock()
+            .await
+            .screenpad_sync_primary
+            .unwrap_or_default()
+    }
+
+    #[zbus(property)]
+    async fn set_screenpad_sync_with_primary(&self, sync: bool) -> Result<(), zbus::Error> {
+        self.config.lock().await.screenpad_sync_primary = Some(sync);
+        self.config.lock().await.write();
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn screenpad_gamma(&self) -> String {
+        (self.config.lock().await.screenpad_gamma.unwrap_or(1.0)).to_string()
+    }
+
+    #[zbus(property)]
+    async fn set_screenpad_gamma(&self, value: &str) -> Result<(), zbus::Error> {
+        let gamma: f32 = value
+            .parse()
+            .map_err(|_| FdoErr::Failed("Invalid gamma value, must be a valid number".into()))?;
+
+        if gamma < 0.1 {
+            return Err(FdoErr::Failed("Gamma value must be greater than 0".into()).into());
+        }
+        if gamma > 2.0 {
+            return Err(FdoErr::Failed("Gamma value must be 2.0 or less".into()).into());
+        }
+        self.config.lock().await.screenpad_gamma = Some(gamma);
+        self.config.lock().await.write();
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn primary_brightness(&self) -> Result<i32, FdoErr> {
+        self.get_brightness_percent(&BacklightType::Primary).await
+    }
+
+    #[zbus(property)]
+    async fn set_primary_brightness(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalEmitter<'_>,
+        level: i32,
+    ) -> Result<(), zbus::Error> {
+        if level > 100 {
+            return Err(FdoErr::Failed("Brightness level must be 0-100".into()).into());
+        }
+
+        self.set_brightness_with_sync(&BacklightType::Primary, level)
+            .await?;
+        self.primary_brightness_changed(&ctxt).await?;
+
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn screenpad_brightness(&self) -> Result<i32, FdoErr> {
+        self.get_brightness_percent(&BacklightType::Screenpad).await
+    }
+
+    #[zbus(property)]
+    async fn set_screenpad_brightness(
+        &self,
+        // #[zbus(signal_context)] ctxt: SignalEmitter<'_>,
+        level: i32,
+    ) -> Result<(), zbus::Error> {
+        if level > 100 {
+            return Err(FdoErr::Failed("Brightness level must be 0-100".into()).into());
+        }
+
+        self.set_brightness_with_sync(&BacklightType::Screenpad, level)
+            .await?;
+        // self.screenpad_brightness_changed(&ctxt).await?;
+
+        Ok(())
+    }
+
+    #[zbus(property)]
+    async fn screenpad_power(&self) -> Result<bool, FdoErr> {
+        if let Some(backlight) = self.get_backlight(&BacklightType::Screenpad) {
+            let power = backlight.get_bl_power().map_err(|e| {
+                warn!("Failed to get backlight power: {}", e);
+                FdoErr::Failed(format!("Failed to get backlight power: {}", e))
+            })?;
+            Ok(power == 0)
+        } else {
+            Err(FdoErr::NotSupported("Screenpad backlight not found".into()))
+        }
+    }
+
+    #[zbus(property)]
+    async fn set_screenpad_power(
+        &self,
+        #[zbus(signal_context)] ctxt: SignalEmitter<'_>,
+        power: bool,
+    ) -> Result<(), zbus::Error> {
+        if let Some(backlight) = self.get_backlight(&BacklightType::Screenpad) {
+            backlight
+                .set_bl_power(if power { 0 } else { 1 })
+                .map_err(|e| {
+                    warn!("Failed to set backlight power: {}", e);
+                    FdoErr::Failed(format!("Failed to set backlight power: {}", e))
+                })?;
+            self.screenpad_power_changed(&ctxt).await?;
+            Ok(())
+        } else {
+            Err(FdoErr::NotSupported("Screenpad backlight not found".into()).into())
+        }
+    }
+}
+
+impl crate::ZbusRun for CtrlBacklight {
+    async fn add_to_server(self, server: &mut Connection) {
+        Self::add_to_server_helper(self, ASUS_ZBUS_PATH, server).await;
+    }
+}
+
+impl crate::Reloadable for CtrlBacklight {
+    async fn reload(&mut self) -> Result<(), RogError> {
+        info!("Reloading backlight settings");
+        Ok(())
+    }
+}

asusd/src/ctrl_fancurves.rs

@@ -4,25 +4,26 @@ use std::sync::Arc;
 use config_traits::{StdConfig, StdConfigLoad};
 use futures_lite::StreamExt;
 use log::{debug, error, info, warn};
-use rog_platform::platform::{RogPlatform, ThrottlePolicy};
+use rog_platform::platform::{PlatformProfile, RogPlatform};
 use rog_profiles::error::ProfileError;
 use rog_profiles::fan_curve_set::CurveData;
 use rog_profiles::{find_fan_curve_node, FanCurvePU, FanCurveProfiles};
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 use tokio::sync::Mutex;
-use zbus::{interface, Connection, SignalContext};
+use zbus::object_server::SignalEmitter;
+use zbus::{interface, Connection};
 
 use crate::error::RogError;
 use crate::{CtrlTask, CONFIG_PATH_BASE};
 
 pub const FAN_CURVE_ZBUS_NAME: &str = "FanCurves";
-pub const FAN_CURVE_ZBUS_PATH: &str = "/org/asuslinux";
+pub const FAN_CURVE_ZBUS_PATH: &str = "/xyz/ljones";
 
 #[derive(Deserialize, Serialize, Debug, Default)]
 pub struct FanCurveConfig {
     pub profiles: FanCurveProfiles,
     #[serde(skip)]
-    pub current: u8,
+    pub current: PlatformProfile,
 }
 
 impl StdConfig for FanCurveConfig {
@@ -53,7 +54,7 @@ pub struct CtrlFanCurveZbus {
 impl CtrlFanCurveZbus {
     pub fn new() -> Result<Self, RogError> {
         let platform = RogPlatform::new()?;
-        if platform.has_throttle_thermal_policy() {
+        if platform.has_platform_profile() {
             info!("Device has profile control available");
             find_fan_curve_node()?;
             info!("Device has fan curves available");
@@ -64,16 +65,13 @@ impl CtrlFanCurveZbus {
             if config.profiles.balanced.is_empty() || !config.file_path().exists() {
                 info!("Fetching default fan curves");
 
-                let current = platform.get_throttle_thermal_policy()?;
-                for this in [
-                    ThrottlePolicy::Balanced,
-                    ThrottlePolicy::Performance,
-                    ThrottlePolicy::Quiet,
-                ] {
+                let current = platform.get_platform_profile()?;
+                let profiles = platform.get_platform_profile_choices()?;
+                for this in profiles {
                     // For each profile we need to switch to it before we
                     // can read the existing values from hardware. The ACPI method used
                     // for this is what limits us.
-                    platform.set_throttle_thermal_policy(this.into())?;
+                    platform.set_platform_profile(this.into())?;
                     let mut dev = find_fan_curve_node()?;
                     fan_curves.set_active_curve_to_defaults(this, &mut dev)?;
 
@@ -82,7 +80,7 @@ impl CtrlFanCurveZbus {
                         info!("{}", String::from(curve));
                     }
                 }
-                platform.set_throttle_thermal_policy(current)?;
+                platform.set_platform_profile(current.as_str())?;
                 config.profiles = fan_curves;
                 config.write();
             } else {
@@ -100,13 +98,13 @@ impl CtrlFanCurveZbus {
     }
 }
 
-#[interface(name = "org.asuslinux.FanCurves")]
+#[interface(name = "xyz.ljones.FanCurves")]
 impl CtrlFanCurveZbus {
     /// Set all fan curves for a profile to enabled status. Will also activate a
     /// fan curve if in the same profile mode
     async fn set_fan_curves_enabled(
         &mut self,
-        profile: ThrottlePolicy,
+        profile: PlatformProfile,
         enabled: bool,
     ) -> zbus::fdo::Result<()> {
         self.config
@@ -127,7 +125,7 @@ impl CtrlFanCurveZbus {
     /// activate a fan curve if in the same profile mode
     async fn set_profile_fan_curve_enabled(
         &mut self,
-        profile: ThrottlePolicy,
+        profile: PlatformProfile,
         fan: FanCurvePU,
         enabled: bool,
     ) -> zbus::fdo::Result<()> {
@@ -148,7 +146,7 @@ impl CtrlFanCurveZbus {
     /// Get the fan-curve data for the currently active ThrottlePolicy
     async fn fan_curve_data(
         &mut self,
-        profile: ThrottlePolicy,
+        profile: PlatformProfile,
     ) -> zbus::fdo::Result<Vec<CurveData>> {
         let curve = self
             .config
@@ -164,7 +162,7 @@ impl CtrlFanCurveZbus {
     /// Will also activate the fan curve if the user is in the same mode.
     async fn set_fan_curve(
         &mut self,
-        profile: ThrottlePolicy,
+        profile: PlatformProfile,
         curve: CurveData,
     ) -> zbus::fdo::Result<()> {
         self.config
@@ -172,7 +170,7 @@ impl CtrlFanCurveZbus {
             .await
             .profiles
             .save_fan_curve(curve, profile)?;
-        let active: ThrottlePolicy = self.platform.get_throttle_thermal_policy()?.into();
+        let active: PlatformProfile = self.platform.get_platform_profile()?.into();
         if active == profile {
             self.config
                 .lock()
@@ -189,15 +187,15 @@ impl CtrlFanCurveZbus {
     ///
     /// Each platform_profile has a different default and the default can be
     /// read only for the currently active profile.
-    async fn set_curves_to_defaults(&mut self, profile: ThrottlePolicy) -> zbus::fdo::Result<()> {
-        let active = self.platform.get_throttle_thermal_policy()?;
-        self.platform.set_throttle_thermal_policy(profile.into())?;
+    async fn set_curves_to_defaults(&mut self, profile: PlatformProfile) -> zbus::fdo::Result<()> {
+        let active = self.platform.get_platform_profile()?;
+        self.platform.set_platform_profile(profile.into())?;
         self.config
             .lock()
             .await
             .profiles
             .set_active_curve_to_defaults(profile, &mut find_fan_curve_node()?)?;
-        self.platform.set_throttle_thermal_policy(active)?;
+        self.platform.set_platform_profile(active.as_str())?;
         self.config.lock().await.write();
         Ok(())
     }
@@ -207,16 +205,16 @@ impl CtrlFanCurveZbus {
     ///
     /// Each platform_profile has a different default and the defualt can be
     /// read only for the currently active profile.
-    async fn reset_profile_curves(&self, profile: ThrottlePolicy) -> zbus::fdo::Result<()> {
-        let active = self.platform.get_throttle_thermal_policy()?;
+    async fn reset_profile_curves(&self, profile: PlatformProfile) -> zbus::fdo::Result<()> {
+        let active = self.platform.get_platform_profile()?;
 
-        self.platform.set_throttle_thermal_policy(profile.into())?;
+        self.platform.set_platform_profile(profile.into())?;
         self.config
             .lock()
             .await
             .profiles
-            .set_active_curve_to_defaults(active.into(), &mut find_fan_curve_node()?)?;
-        self.platform.set_throttle_thermal_policy(active)?;
+            .set_active_curve_to_defaults(active.as_str().into(), &mut find_fan_curve_node()?)?;
+        self.platform.set_platform_profile(active.as_str())?;
 
         self.config.lock().await.write();
         Ok(())
@@ -234,27 +232,32 @@ impl CtrlTask for CtrlFanCurveZbus {
         FAN_CURVE_ZBUS_PATH
     }
 
-    async fn create_tasks(&self, _signal_ctxt: SignalContext<'static>) -> Result<(), RogError> {
-        let watch_throttle_thermal_policy = self.platform.monitor_throttle_thermal_policy()?;
+    async fn create_tasks(&self, _signal_ctxt: SignalEmitter<'static>) -> Result<(), RogError> {
+        let watch_platform_profile = self.platform.monitor_platform_profile()?;
         let platform = self.platform.clone();
         let config = self.config.clone();
         let fan_curves = self.config.clone();
 
         tokio::spawn(async move {
             let mut buffer = [0; 32];
-            if let Ok(mut stream) = watch_throttle_thermal_policy.into_event_stream(&mut buffer) {
+            if let Ok(mut stream) = watch_platform_profile.into_event_stream(&mut buffer) {
                 while (stream.next().await).is_some() {
-                    debug!("watch_throttle_thermal_policy changed");
-                    if let Ok(profile) = platform.get_throttle_thermal_policy().map_err(|e| {
-                        error!("get_throttle_thermal_policy error: {e}");
-                    }) {
+                    debug!("watch_platform_profile changed");
+                    if let Ok(profile) =
+                        platform
+                            .get_platform_profile()
+                            .map(|p| p.into())
+                            .map_err(|e| {
+                                error!("get_platform_profile error: {e}");
+                            })
+                    {
                         if profile != config.lock().await.current {
                             fan_curves
                                 .lock()
                                 .await
                                 .profiles
                                 .write_profile_curve_to_platform(
-                                    profile.into(),
+                                    profile,
                                     &mut find_fan_curve_node().unwrap(),
                                 )
                                 .map_err(|e| warn!("write_profile_curve_to_platform, {}", e))
@@ -273,7 +276,7 @@ impl CtrlTask for CtrlFanCurveZbus {
 impl crate::Reloadable for CtrlFanCurveZbus {
     /// Fetch the active profile and use that to set all related components up
     async fn reload(&mut self) -> Result<(), RogError> {
-        let active = self.platform.get_throttle_thermal_policy()?.into();
+        let active = self.platform.get_platform_profile()?.into();
         let mut config = self.config.lock().await;
         if let Ok(mut device) = find_fan_curve_node() {
             config

asusd/src/ctrl_slash/config.rs

@@ -1,51 +0,0 @@
-use config_traits::{StdConfig, StdConfigLoad};
-use rog_slash::{DeviceState, SlashMode};
-use serde_derive::{Deserialize, Serialize};
-
-const CONFIG_FILE: &str = "slash.ron";
-
-/// Config for base system actions for the anime display
-#[derive(Deserialize, Serialize, Debug)]
-pub struct SlashConfig {
-    pub slash_enabled: bool,
-    pub slash_brightness: u8,
-    pub slash_interval: u8,
-    pub slash_mode: SlashMode,
-}
-
-impl Default for SlashConfig {
-    fn default() -> Self {
-        SlashConfig {
-            slash_enabled: true,
-            slash_brightness: 255,
-            slash_interval: 0,
-            slash_mode: SlashMode::Bounce,
-        }
-    }
-}
-impl StdConfig for SlashConfig {
-    fn new() -> Self {
-        Self::default()
-    }
-
-    fn file_name(&self) -> String {
-        CONFIG_FILE.to_owned()
-    }
-
-    fn config_dir() -> std::path::PathBuf {
-        std::path::PathBuf::from(crate::CONFIG_PATH_BASE)
-    }
-}
-
-impl StdConfigLoad for SlashConfig {}
-
-impl From<&SlashConfig> for DeviceState {
-    fn from(config: &SlashConfig) -> Self {
-        DeviceState {
-            slash_enabled: config.slash_enabled,
-            slash_brightness: config.slash_brightness,
-            slash_interval: config.slash_interval,
-            slash_mode: config.slash_mode,
-        }
-    }
-}

asusd/src/ctrl_slash/mod.rs

@@ -1,98 +0,0 @@
-pub mod config;
-pub mod trait_impls;
-
-use config_traits::{StdConfig, StdConfigLoad};
-use rog_platform::hid_raw::HidRaw;
-use rog_platform::usb_raw::USBRaw;
-use rog_slash::error::SlashError;
-use rog_slash::usb::{get_slash_type, pkt_set_mode, pkt_set_options, pkts_for_init};
-use rog_slash::{SlashMode, SlashType};
-
-use crate::ctrl_slash::config::SlashConfig;
-use crate::error::RogError;
-
-enum Node {
-    Usb(USBRaw),
-    Hid(HidRaw),
-}
-
-impl Node {
-    pub fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
-        // TODO: map and pass on errors
-        match self {
-            Node::Usb(u) => {
-                u.write_bytes(message).ok();
-            }
-            Node::Hid(h) => {
-                h.write_bytes(message).ok();
-            }
-        }
-        Ok(())
-    }
-}
-
-pub struct CtrlSlash {
-    node: Node,
-    config: SlashConfig,
-}
-
-impl CtrlSlash {
-    #[inline]
-    pub fn new() -> Result<CtrlSlash, RogError> {
-        let slash_type = get_slash_type()?;
-        if matches!(slash_type, SlashType::Unknown | SlashType::Unsupported) {
-            return Err(RogError::Slash(SlashError::NoDevice));
-        }
-
-        let usb = USBRaw::new(rog_slash::usb::PROD_ID).ok();
-        let hid = HidRaw::new(rog_slash::usb::PROD_ID_STR).ok();
-        let node = if usb.is_some() {
-            unsafe { Node::Usb(usb.unwrap_unchecked()) }
-        } else if hid.is_some() {
-            unsafe { Node::Hid(hid.unwrap_unchecked()) }
-        } else {
-            return Err(RogError::NotSupported);
-        };
-
-        let ctrl = CtrlSlash {
-            node,
-            config: SlashConfig::new().load(),
-        };
-        ctrl.do_initialization()?;
-
-        Ok(ctrl)
-    }
-
-    fn do_initialization(&self) -> Result<(), RogError> {
-        let init_packets = pkts_for_init();
-        self.node.write_bytes(&init_packets[0])?;
-        self.node.write_bytes(&init_packets[1])?;
-
-        // Apply config upon initialization
-        let option_packets = pkt_set_options(
-            self.config.slash_enabled,
-            self.config.slash_brightness,
-            self.config.slash_interval,
-        );
-        self.node.write_bytes(&option_packets)?;
-
-        let mode_packets = pkt_set_mode(self.config.slash_mode);
-        self.node.write_bytes(&mode_packets[0])?;
-        self.node.write_bytes(&mode_packets[1])?;
-
-        Ok(())
-    }
-
-    pub fn set_options(&self, enabled: bool, brightness: u8, interval: u8) -> Result<(), RogError> {
-        let command_packets = pkt_set_options(enabled, brightness, interval);
-        self.node.write_bytes(&command_packets)?;
-        Ok(())
-    }
-
-    pub fn set_slash_mode(&self, slash_mode: SlashMode) -> Result<(), RogError> {
-        let command_packets = pkt_set_mode(slash_mode);
-        self.node.write_bytes(&command_packets[0])?;
-        self.node.write_bytes(&command_packets[1])?;
-        Ok(())
-    }
-}

asusd/src/ctrl_slash/trait_impls.rs

@@ -1,165 +0,0 @@
-use std::sync::Arc;
-
-use config_traits::StdConfig;
-use log::warn;
-use rog_slash::usb::{pkt_set_mode, pkt_set_options};
-use rog_slash::{DeviceState, SlashMode};
-use zbus::export::futures_util::lock::Mutex;
-use zbus::{interface, Connection, SignalContext};
-
-use crate::ctrl_slash::CtrlSlash;
-use crate::error::RogError;
-
-pub const SLASH_ZBUS_NAME: &str = "Slash";
-pub const SLASH_ZBUS_PATH: &str = "/org/asuslinux";
-
-#[derive(Clone)]
-pub struct CtrlSlashZbus(pub Arc<Mutex<CtrlSlash>>);
-
-/// The struct with the main dbus methods requires this trait
-impl crate::ZbusRun for CtrlSlashZbus {
-    async fn add_to_server(self, server: &mut Connection) {
-        Self::add_to_server_helper(self, SLASH_ZBUS_PATH, server).await;
-    }
-}
-
-#[interface(name = "org.asuslinux.Slash")]
-impl CtrlSlashZbus {
-    /// Get enabled or not
-    #[zbus(property)]
-    async fn enabled(&self) -> bool {
-        let lock = self.0.lock().await;
-        lock.config.slash_enabled
-    }
-
-    /// Set enabled true or false
-    #[zbus(property)]
-    async fn set_enabled(&self, enabled: bool) {
-        let mut lock = self.0.lock().await;
-        let brightness = if enabled && lock.config.slash_brightness == 0 {
-            0x88
-        } else {
-            lock.config.slash_brightness
-        };
-        lock.node
-            .write_bytes(&pkt_set_options(
-                enabled,
-                brightness,
-                lock.config.slash_interval,
-            ))
-            .map_err(|err| {
-                warn!("ctrl_slash::set_options {}", err);
-            })
-            .ok();
-
-        lock.config.slash_enabled = enabled;
-        lock.config.slash_brightness = brightness;
-        lock.config.write();
-    }
-
-    /// Get brightness level
-    #[zbus(property)]
-    async fn brightness(&self) -> u8 {
-        let lock = self.0.lock().await;
-        lock.config.slash_brightness
-    }
-
-    /// Set brightness level
-    #[zbus(property)]
-    async fn set_brightness(&self, brightness: u8) {
-        let mut lock = self.0.lock().await;
-        let enabled = brightness > 0;
-        lock.node
-            .write_bytes(&pkt_set_options(
-                enabled,
-                brightness,
-                lock.config.slash_interval,
-            ))
-            .map_err(|err| {
-                warn!("ctrl_slash::set_options {}", err);
-            })
-            .ok();
-
-        lock.config.slash_enabled = enabled;
-        lock.config.slash_brightness = brightness;
-        lock.config.write();
-    }
-
-    #[zbus(property)]
-    async fn interval(&self) -> u8 {
-        let lock = self.0.lock().await;
-        lock.config.slash_interval
-    }
-
-    /// Set interval between slash animations (0-255)
-    #[zbus(property)]
-    async fn set_interval(&self, interval: u8) {
-        let mut lock = self.0.lock().await;
-        lock.node
-            .write_bytes(&pkt_set_options(
-                lock.config.slash_enabled,
-                lock.config.slash_brightness,
-                interval,
-            ))
-            .map_err(|err| {
-                warn!("ctrl_slash::set_options {}", err);
-            })
-            .ok();
-
-        lock.config.slash_interval = interval;
-        lock.config.write();
-    }
-
-    #[zbus(property)]
-    async fn slash_mode(&self) -> u8 {
-        let lock = self.0.lock().await;
-        lock.config.slash_interval
-    }
-
-    /// Set interval between slash animations (0-255)
-    #[zbus(property)]
-    async fn set_slash_mode(&self, slash_mode: SlashMode) {
-        let mut lock = self.0.lock().await;
-
-        let command_packets = pkt_set_mode(slash_mode);
-
-        lock.node
-            .write_bytes(&command_packets[0])
-            .map_err(|err| {
-                warn!("ctrl_slash::set_options {}", err);
-            })
-            .ok();
-        lock.node
-            .write_bytes(&command_packets[1])
-            .map_err(|err| {
-                warn!("ctrl_slash::set_options {}", err);
-            })
-            .ok();
-
-        lock.config.slash_mode = slash_mode;
-        lock.config.write();
-    }
-
-    /// Get the device state as stored by asusd
-    // #[zbus(property)]
-    async fn device_state(&self) -> DeviceState {
-        let lock = self.0.lock().await;
-        DeviceState::from(&lock.config)
-    }
-}
-
-impl crate::CtrlTask for CtrlSlashZbus {
-    fn zbus_path() -> &'static str {
-        SLASH_ZBUS_PATH
-    }
-
-    async fn create_tasks(&self, _: SignalContext<'static>) -> Result<(), RogError> {
-        Ok(())
-    }
-}
-
-impl crate::Reloadable for CtrlSlashZbus {
-    async fn reload(&mut self) -> Result<(), RogError> {
-        Ok(())
-    }
-}

asusd/src/daemon.rs

@@ -2,34 +2,38 @@ use std::env;
 use std::error::Error;
 use std::sync::Arc;
 
-use ::zbus::export::futures_util::lock::Mutex;
 use ::zbus::Connection;
+use asusd::asus_armoury::{start_attributes_zbus, ArmouryAttributeRegistry};
+use asusd::aura_manager::DeviceManager;
 use asusd::config::Config;
-use asusd::ctrl_anime::trait_impls::CtrlAnimeZbus;
-use asusd::ctrl_anime::CtrlAnime;
-use asusd::ctrl_aura::manager::AuraManager;
+use asusd::ctrl_backlight::CtrlBacklight;
 use asusd::ctrl_fancurves::CtrlFanCurveZbus;
 use asusd::ctrl_platform::CtrlPlatform;
-use asusd::ctrl_slash::trait_impls::CtrlSlashZbus;
-use asusd::ctrl_slash::CtrlSlash;
-use asusd::{print_board_info, start_tasks, CtrlTask, DBUS_NAME};
-use config_traits::{StdConfig, StdConfigLoad1};
+use asusd::{print_board_info, start_tasks, CtrlTask, ZbusRun, DBUS_NAME};
+use config_traits::{StdConfig, StdConfigLoad2};
 use log::{error, info};
+use rog_platform::asus_armoury::FirmwareAttributes;
+use rog_platform::platform::RogPlatform;
+use rog_platform::power::AsusPower;
+use tokio::sync::Mutex;
 use zbus::fdo::ObjectManager;
 
 #[tokio::main]
 async fn main() -> Result<(), Box<dyn std::error::Error>> {
+    println!("Starting asusd daemon...");
+
     // console_subscriber::init();
     let mut logger = env_logger::Builder::new();
     logger
         .parse_default_env()
         .target(env_logger::Target::Stdout)
         .format_timestamp(None)
+        .filter_level(log::LevelFilter::Debug)
         .init();
 
     let is_service = match env::var_os("IS_SERVICE") {
         Some(val) => val == "1",
-        None => false,
+        None => true,
     };
 
     if !is_service {
@@ -59,76 +63,93 @@ async fn start_daemon() -> Result<(), Box<dyn Error>> {
     // println!("{:?}", supported.supported_functions());
 
     // Start zbus server
-    let mut connection = Connection::system().await?;
-    connection
-        .object_server()
-        .at("/org/asuslinux", ObjectManager)
-        .await
-        .unwrap();
+    let mut server = Connection::system().await?;
+    if let Err(e) = server.object_server().at("/", ObjectManager).await {
+        error!("Failed to register ObjectManager at root '/': {e:?}");
+    }
 
     let config = Config::new().load();
     let cfg_path = config.file_path();
     let config = Arc::new(Mutex::new(config));
 
     // supported.add_to_server(&mut connection).await;
+    let platform = RogPlatform::new()?; // TODO: maybe needs async mutex?
+    let power = AsusPower::new()?; // TODO: maybe needs async mutex?
+    let attributes = FirmwareAttributes::new();
+    let armoury_registry = match start_attributes_zbus(
+        &server,
+        platform.clone(),
+        power.clone(),
+        attributes.clone(),
+        config.clone(),
+    )
+    .await
+    {
+        Ok(registry) => {
+            info!("attribute on zbus initialized");
+            registry
+        }
+        Err(e) => {
+            error!("Failed to initialize firmware attributes over zbus: {e:?}");
+            ArmouryAttributeRegistry::default()
+        }
+    };
 
     match CtrlFanCurveZbus::new() {
         Ok(ctrl) => {
-            let sig_ctx = CtrlFanCurveZbus::signal_context(&connection)?;
-            start_tasks(ctrl, &mut connection, sig_ctx).await?;
+            info!("FanCurves: found supported fancurves");
+            let sig_ctx = CtrlFanCurveZbus::signal_context(&server)?;
+            start_tasks(ctrl, &mut server, sig_ctx).await?;
+            info!("FanCurves: initialized");
         }
         Err(err) => {
             error!("FanCurves: {}", err);
         }
     }
 
+    match CtrlBacklight::new(config.clone()) {
+        Ok(backlight) => {
+            info!("Backlight: found supported backlight");
+            backlight.start_watch_primary().await?;
+            backlight.add_to_server(&mut server).await;
+            info!("Backlight: initialized");
+        }
+        Err(err) => {
+            error!("Backlight: {}", err);
+        }
+    }
+
     match CtrlPlatform::new(
+        platform,
+        power,
+        attributes,
         config.clone(),
         &cfg_path,
-        CtrlPlatform::signal_context(&connection)?,
+        CtrlPlatform::signal_context(&server)?,
+        server.clone(),
+        armoury_registry,
     ) {
         Ok(ctrl) => {
-            let sig_ctx = CtrlPlatform::signal_context(&connection)?;
-            start_tasks(ctrl, &mut connection, sig_ctx).await?;
+            info!("CtrlPlatform: initialized");
+            let sig_ctx = CtrlPlatform::signal_context(&server)?;
+            start_tasks(ctrl, &mut server, sig_ctx).await?;
+            info!("CtrlPlatform: tasks started");
         }
         Err(err) => {
             error!("CtrlPlatform: {}", err);
         }
     }
 
-    match CtrlAnime::new() {
-        Ok(ctrl) => {
-            let zbus = CtrlAnimeZbus(Arc::new(Mutex::new(ctrl)));
-            let sig_ctx = CtrlAnimeZbus::signal_context(&connection)?;
-            start_tasks(zbus, &mut connection, sig_ctx).await?;
-        }
-        Err(err) => {
-            info!("AniMe control: {}", err);
-        }
-    }
+    let _ = DeviceManager::new(server.clone()).await?;
 
-    match CtrlSlash::new() {
-        Ok(ctrl) => {
-            let zbus = CtrlSlashZbus(Arc::new(Mutex::new(ctrl)));
-            // Currently, the Slash has no need for a loop watching power events, however,
-            // it could be cool to have the slash do some power-on/off animation
-            // (It has a built-in power on animation which plays when u plug in the power
-            // supply)
-            let sig_ctx = CtrlSlashZbus::signal_context(&connection)?;
-            start_tasks(zbus, &mut connection, sig_ctx).await?;
-        }
-        Err(err) => {
-            info!("AniMe control: {}", err);
-        }
-    }
-
-    let _ = AuraManager::new(connection.clone()).await?;
+    info!("DeviceManager initialized");
 
     // Request dbus name after finishing initalizing all functions
-    connection.request_name(DBUS_NAME).await?;
+    server.request_name(DBUS_NAME).await?;
 
+    info!("Startup success on dbus name {DBUS_NAME}: begining dbus server loop");
     loop {
         // This is just a blocker to idle and ensure the reator reacts
-        connection.executor().tick().await;
+        server.executor().tick().await;
     }
 }

asusd/src/error.rs

@@ -142,3 +142,10 @@ impl From<RogError> for zbus::fdo::Error {
         zbus::fdo::Error::Failed(format!("{}", err))
     }
 }
+
+impl From<RogError> for zbus::Error {
+    #[inline]
+    fn from(err: RogError) -> Self {
+        zbus::Error::Failure(format!("{}", err))
+    }
+}

asusd/src/lib.rs

@@ -1,17 +1,19 @@
 #![deny(unused_must_use)]
 /// Configuration loading, saving
 pub mod config;
-/// Control of anime matrix display
-pub mod ctrl_anime;
-/// Keyboard LED brightness control, RGB, and LED display modes
-pub mod ctrl_aura;
+pub mod ctrl_backlight;
 /// Control platform profiles + fan-curves if available
 pub mod ctrl_fancurves;
 /// Control ASUS bios function such as boot sound, Optimus/Dedicated gfx mode
 pub mod ctrl_platform;
-/// Control of Slash led bar
-pub mod ctrl_slash;
 
+pub mod asus_armoury;
+pub mod aura_anime;
+pub mod aura_laptop;
+pub mod aura_manager;
+pub mod aura_scsi;
+pub mod aura_slash;
+pub mod aura_types;
 pub mod error;
 
 use std::future::Future;
@@ -22,15 +24,19 @@ use futures_lite::stream::StreamExt;
 use log::{debug, info, warn};
 use logind_zbus::manager::ManagerProxy;
 use tokio::time::sleep;
+use zbus::object_server::{Interface, SignalEmitter};
+use zbus::proxy::CacheProperties;
 use zbus::zvariant::ObjectPath;
-use zbus::{CacheProperties, Connection, SignalContext};
+use zbus::Connection;
 
 use crate::error::RogError;
 
 const CONFIG_PATH_BASE: &str = "/etc/asusd/";
-pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
-pub static DBUS_PATH: &str = "/org/asuslinux/Daemon";
-pub static DBUS_IFACE: &str = "org.asuslinux.Daemon";
+pub const ASUS_ZBUS_PATH: &str = "/xyz/ljones";
+
+pub static DBUS_NAME: &str = "xyz.ljones.Asusd";
+pub static DBUS_PATH: &str = "/xyz/ljones/Daemon";
+pub static DBUS_IFACE: &str = "xyz.ljones.Asusd";
 
 /// This macro adds a function which spawns an `inotify` task on the passed in
 /// `Executor`.
@@ -39,7 +45,7 @@ pub static DBUS_IFACE: &str = "org.asuslinux.Daemon";
 /// methods to be available:
 /// - `<name>() -> SomeValue`, functionally is a getter, but is allowed to have
 ///   side effects.
-/// - `notify_<name>(SignalContext, SomeValue)`
+/// - `notify_<name>(SignalEmitter, SomeValue)`
 ///
 /// In most cases if `SomeValue` is stored in a config then `<name>()` getter is
 /// expected to update it. The getter should *never* write back to the path or
@@ -60,9 +66,9 @@ macro_rules! task_watch_item {
         concat_idents::concat_idents!(fn_name = watch_, $name {
         async fn fn_name(
             &self,
-            signal_ctxt: SignalContext<'static>,
+            signal_ctxt: SignalEmitter<'static>,
         ) -> Result<(), RogError> {
-            use zbus::export::futures_util::StreamExt;
+            use futures_util::StreamExt;
 
             let ctrl = self.clone();
             concat_idents::concat_idents!(watch_fn = monitor_, $name {
@@ -100,9 +106,9 @@ macro_rules! task_watch_item_notify {
         concat_idents::concat_idents!(fn_name = watch_, $name {
         async fn fn_name(
             &self,
-            signal_ctxt: SignalContext<'static>,
+            signal_ctxt: SignalEmitter<'static>,
         ) -> Result<(), RogError> {
-            use zbus::export::futures_util::StreamExt;
+            use futures_util::StreamExt;
 
             let ctrl = self.clone();
             concat_idents::concat_idents!(watch_fn = monitor_, $name {
@@ -143,7 +149,7 @@ pub trait ReloadAndNotify {
 
     fn reload_and_notify(
         &mut self,
-        signal_context: &SignalContext<'static>,
+        signal_context: &SignalEmitter<'static>,
         data: Self::Data,
     ) -> impl Future<Output = Result<(), RogError>> + Send;
 }
@@ -152,7 +158,7 @@ pub trait ZbusRun {
     fn add_to_server(self, server: &mut Connection) -> impl Future<Output = ()> + Send;
 
     fn add_to_server_helper(
-        iface: impl zbus::Interface,
+        iface: impl Interface,
         path: &str,
         server: &mut Connection,
     ) -> impl Future<Output = ()> + Send {
@@ -174,8 +180,8 @@ pub trait ZbusRun {
 pub trait CtrlTask {
     fn zbus_path() -> &'static str;
 
-    fn signal_context(connection: &Connection) -> Result<SignalContext<'static>, zbus::Error> {
-        SignalContext::new(connection, Self::zbus_path())
+    fn signal_context(connection: &Connection) -> Result<SignalEmitter<'static>, zbus::Error> {
+        SignalEmitter::new(connection, Self::zbus_path())
     }
 
     /// Implement to set up various tasks that may be required, using the
@@ -183,7 +189,7 @@ pub trait CtrlTask {
     /// separate thread.
     fn create_tasks(
         &self,
-        signal: SignalContext<'static>,
+        signal: SignalEmitter<'static>,
     ) -> impl Future<Output = Result<(), RogError>> + Send;
 
     // /// Create a timed repeating task
@@ -297,7 +303,7 @@ pub trait GetSupported {
 pub async fn start_tasks<T>(
     mut zbus: T,
     connection: &mut Connection,
-    signal_ctx: SignalContext<'static>,
+    signal_ctx: SignalEmitter<'static>,
 ) -> Result<(), RogError>
 where
     T: ZbusRun + Reloadable + CtrlTask + Clone,

config-traits/Cargo.toml

@@ -13,6 +13,3 @@ serde.workspace = true
 ron.workspace = true
 
 log.workspace = true
-
-[dev-dependencies]
-cargo-husky.workspace = true

config-traits/src/lib.rs

@@ -146,11 +146,7 @@ where
 
     /// Renames the existing file to `<file>-old`
     fn rename_file_old(&self) {
-        warn!(
-            "Renaming {} to {}-old and recreating config",
-            self.file_name(),
-            self.file_name()
-        );
+        warn!("Renaming {} to {}-old", self.file_name(), self.file_name());
         let mut cfg_old = self.file_path().to_string_lossy().to_string();
         cfg_old.push_str("-old");
         std::fs::rename(self.file_path(), cfg_old).unwrap_or_else(|err| {
@@ -207,7 +203,7 @@ macro_rules! std_config_load {
         /// new one created
         pub trait $trait_name<$($generic),*>
         where
-            Self: $crate::StdConfig +std::fmt::Debug + DeserializeOwned + Serialize,
+            Self: $crate::StdConfig + DeserializeOwned + Serialize,
             $($generic: DeserializeOwned + Into<Self>),*
         {
             fn load(mut self) -> Self {
@@ -274,6 +270,8 @@ mod tests {
             }
         }
 
+        let _ = Test {};
+
         impl crate::StdConfigLoad1<Old1> for Test {}
     }
 
@@ -323,6 +321,8 @@ mod tests {
             }
         }
 
+        let _ = Test {};
+
         impl crate::StdConfigLoad3<Old1, Old2, Old3> for Test {}
     }
 }

cpuctl/Cargo.toml

@@ -1,11 +0,0 @@
-[package]
-name = "cpuctl"
-license.workspace = true
-version.workspace = true
-readme.workspace = true
-authors.workspace = true
-repository.workspace = true
-homepage.workspace = true
-edition.workspace = true
-
-[dependencies]

cpuctl/src/lib.rs

@@ -1,14 +0,0 @@
-pub fn add(left: usize, right: usize) -> usize {
-    left + right
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-
-    #[test]
-    fn it_works() {
-        let result = add(2, 2);
-        assert_eq!(result, 4);
-    }
-}

data/asusd.conf

@@ -3,24 +3,24 @@
           "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
 <busconfig>
     <policy group="adm">
-        <allow send_destination="org.asuslinux.Daemon"/>
-        <allow receive_sender="org.asuslinux.Daemon"/>
+        <allow send_destination="xyz.ljones.Asusd"/>
+        <allow receive_sender="xyz.ljones.Asusd"/>
     </policy>
     <policy group="sudo">
-        <allow send_destination="org.asuslinux.Daemon"/>
-        <allow receive_sender="org.asuslinux.Daemon"/>
+        <allow send_destination="xyz.ljones.Asusd"/>
+        <allow receive_sender="xyz.ljones.Asusd"/>
     </policy>
     <policy group="users">
-        <allow send_destination="org.asuslinux.Daemon"/>
-        <allow receive_sender="org.asuslinux.Daemon"/>
+        <allow send_destination="xyz.ljones.Asusd"/>
+        <allow receive_sender="xyz.ljones.Asusd"/>
     </policy>
     <policy group="wheel">
-        <allow send_destination="org.asuslinux.Daemon"/>
-        <allow receive_sender="org.asuslinux.Daemon"/>
+        <allow send_destination="xyz.ljones.Asusd"/>
+        <allow receive_sender="xyz.ljones.Asusd"/>
     </policy>
     <policy user="root">
-        <allow own="org.asuslinux.Daemon"/>
-        <allow send_destination="org.asuslinux.Daemon"/>
-        <allow receive_sender="org.asuslinux.Daemon"/>
+        <allow own="xyz.ljones.Asusd"/>
+        <allow send_destination="xyz.ljones.Asusd"/>
+        <allow receive_sender="xyz.ljones.Asusd"/>
     </policy>
 </busconfig>

data/asusd.rules

@@ -7,11 +7,16 @@ ENV{DMI_FAMILY}=="*ROG*", GOTO="asusd_start"
 ENV{DMI_FAMILY}=="*Zephyrus*", GOTO="asusd_start"
 ENV{DMI_FAMILY}=="*Strix*", GOTO="asusd_start"
 ENV{DMI_FAMILY}=="*Vivo*ook*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*Zenbook*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*ProArt*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*TX Air*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*TX Gaming*", GOTO="asusd_start"
+ENV{DMI_FAMILY}=="*EXPERTBOOK*", GOTO="asusd_start"
 # No match so
 GOTO="asusd_end"
 
 LABEL="asusd_start"
-ACTION=="add|change", DRIVER=="asus-nb-wmi", TAG+="systemd", ENV{SYSTEMD_WANTS}="asusd.service"
-ACTION=="add|remove", DRIVER=="asus-nb-wmi", TAG+="systemd", RUN+="systemctl restart asusd.service"
+ACTION=="add|change", DRIVER=="asus-nb-wmi", TAG+="systemd", ENV{SYSTEMD_WANTS}+="asusd.service"
+ACTION=="add|remove", DRIVER=="asus-nb-wmi", TAG+="systemd", ENV{SYSTEMD_WANTS}+="asusd.service"
 
 LABEL="asusd_end"

data/asusd.service

@@ -6,13 +6,17 @@ After=nvidia-powerd.service systemd-udevd.service
 
 [Service]
 Environment=IS_SERVICE=1
-Environment=RUST_LOG="info"
+# Reduce noisy span logs while keeping useful debug info for asusd and related crates.
+# Keep global level at info but allow debug for our crates; silence tracing::span (very noisy)
+# RUST_LOG format: <module>=<level>,...  (levels: error,warn,info,debug,trace)
+Environment=RUST_LOG="info,asusd=debug,rog_platform=debug,tracing::span=error,zbus::object_server=error,zbus::connection::handshake::common=error,zbus::connection::handshake::client=error"
 # required to prevent init issues with hid_asus and MCU
 ExecStartPre=/bin/sleep 1
 ExecStart=/usr/bin/asusd
 Restart=on-failure
 RestartSec=1
 Type=dbus
-BusName=org.asuslinux.Daemon
+BusName=xyz.ljones.Asusd
 SELinuxContext=system_u:system_r:unconfined_t:s0
 #SELinuxContext=system_u:object_r:modules_object_t:s0
+TimeoutSec=10

design-patterns.md

@@ -135,7 +135,7 @@ impl crate::ZbusAdd for CtrlAnimeZbus {
     }
 }
 
-#[dbus_interface(name = "org.asuslinux.Daemon")]
+#[dbus_interface(name = "xyz.ljones.Asusd")]
 impl CtrlAnimeZbus {
     async fn <zbus method>() {
        let lock = self.inner.lock().await;

distro-packaging/asusctl.spec

@@ -1,7 +1,7 @@
 #
 # spec file for package asus-nb-ctrl
 #
-# Copyright (c) 2020-2021 Luke Jones <luke@ljones.dev>
+# Copyright (c) 2020-2025 Luke Jones <luke@ljones.dev>
 #
 # All modifications and additions to the file contributed by third parties
 # remain the property of their copyright owners, unless otherwise agreed
@@ -20,36 +20,43 @@
 %global debug_package %{nil}
 %endif
 
-%global rpm_dkms_opt 1
+%define version 6.3.1
+%define specrelease %{?dist}
+%define pkg_release 1%{specrelease}
 
 # Use hardening ldflags.
 %global rustflags -Clink-arg=-Wl,-z,relro,-z,now
-Name:           asusctl
-Version:        4.7.0
-Release:        2
-Summary:        Control fan speeds, LEDs, graphics modes, and charge levels for ASUS notebooks
-License:        MPLv2
+Name:    asusctl
+Version: %{version}
+Release: %{pkg_release}
+Summary: Control fan speeds, LEDs, graphics modes, and charge levels for ASUS notebooks
+License: MPLv2
 
-Group:          System Environment/Kernel
+Group:   System Environment/Kernel
 
-URL:            https://gitlab.com/asus-linux/asusctl
-Source:         %{name}-%{version}.tar.gz
-Source1:        vendor-%{name}-%{version}.tar.gz
-Source2:        cargo_config
+URL:     https://gitlab.com/asus-linux/asusctl
+Source:  https://gitlab.com/asus-linux/asusctl/-/archive/%{version}/%{name}-%{version}.tar.gz
 
-BuildRequires:  cargo
+%if %{defined fedora}
 BuildRequires:  rust-packaging
 BuildRequires:  systemd-rpm-macros
+%else
+BuildRequires:  cargo-packaging
+%endif
+BuildRequires:  git
 BuildRequires:  clang-devel
+BuildRequires:  cargo
 BuildRequires:  cmake
 BuildRequires:  rust
 BuildRequires:  rust-std-static
-BuildRequires:  pkgconfig(dbus-1)
+BuildRequires:  pkgconfig(gbm)
+BuildRequires:  pkgconfig(libinput)
+BuildRequires:  pkgconfig(libseat)
 BuildRequires:  pkgconfig(libudev)
-BuildRequires:  pkgconfig(gtk+-3.0)
-BuildRequires:  pkgconfig(gdk-3.0)
+BuildRequires:  pkgconfig(xkbcommon)
+BuildRequires:  pkgconfig(libzstd)
+BuildRequires:  pkgconfig(fontconfig)
 BuildRequires:  desktop-file-utils
-Requires: libappindicator-gtk3
 
 %description
 asus-nb-ctrl is a utility for Linux to control many aspects of various
@@ -61,6 +68,7 @@ asus-nb-ctrl enables third-party apps to use the above with dbus methods.
 
 %package rog-gui
 Summary: An experimental GUI for %{name}
+Requires: %{name} = %{version}-%{release}
 
 %description rog-gui
 A one-stop-shop GUI tool for asusd/asusctl. It aims to provide most controls,
@@ -68,30 +76,85 @@ a notification service, and ability to run in the background.
 
 %prep
 %autosetup
-%setup -D -T -a 1 -c -n %{name}-%{version}/vendor
-cd ..
-
-mv Cargo.lock{,.bak}
-%cargo_prep
-mv Cargo.lock{.bak,}
-sed -i 's|replace-with = "local-registry"|replace-with = "vendored-sources"|' .cargo/config
-cat %{SOURCE2} >> .cargo/config
+mkdir -p .cargo
+cat > .cargo/config.toml << 'EOF'
+[term]
+verbose = true
+[net]
+offline = false
+EOF
 
 %build
 export RUSTFLAGS="%{rustflags}"
-%cargo_build
-#cargo build --release --frozen --offline --config .cargo/config.toml
+%if %{defined fedora}
+/usr/bin/cargo build --release --locked
+%else
+/usr/bin/cargo auditable build --release --locked
+%endif
 
 %install
 export RUSTFLAGS="%{rustflags}"
-mkdir -p "%{buildroot}/%{_bindir}" "%{buildroot}%{_docdir}"
-%make_install
- 
-install -D -m 0644 README.md %{buildroot}/%{_docdir}/%{name}/README.md
-install -D -m 0644 rog-anime/README.md %{buildroot}/%{_docdir}/%{name}/README-anime.md
-install -D -m 0644 rog-anime/data/diagonal-template.png %{buildroot}/%{_docdir}/%{name}/diagonal-template.png
 
-desktop-file-validate %{buildroot}/%{_datadir}/applications/rog-control-center.desktop
+%define _target_dir target/release
+
+# Install binaries
+install -D -m 0755 %{_target_dir}/asusd %{buildroot}%{_bindir}/asusd
+install -D -m 0755 %{_target_dir}/asusd-user %{buildroot}%{_bindir}/asusd-user
+install -D -m 0755 %{_target_dir}/asusctl %{buildroot}%{_bindir}/asusctl
+install -D -m 0755 %{_target_dir}/rog-control-center %{buildroot}%{_bindir}/rog-control-center
+
+# Install systemd units
+install -D -m 0644 data/asusd.service %{buildroot}%{_unitdir}/asusd.service
+install -D -m 0644 data/asusd-user.service %{buildroot}%{_userunitdir}/asusd-user.service
+
+# Install udev rules
+install -D -m 0644 data/asusd.rules %{buildroot}%{_udevrulesdir}/99-asusd.rules
+
+# Install dbus config
+install -D -m 0644 data/asusd.conf %{buildroot}%{_datadir}/dbus-1/system.d/asusd.conf
+
+# Install asusd data
+install -D -m 0644 rog-aura/data/aura_support.ron %{buildroot}%{_datadir}/asusd/aura_support.ron
+cp -r rog-anime/data/anime %{buildroot}%{_datadir}/asusd/
+
+# Install rog-gui data
+install -D -m 0644 rog-control-center/data/rog-control-center.desktop %{buildroot}%{_datadir}/applications/rog-control-center.desktop
+install -D -m 0644 rog-control-center/data/rog-control-center.png %{buildroot}%{_datadir}/icons/hicolor/512x512/apps/rog-control-center.png
+mkdir -p %{buildroot}%{_datadir}/rog-gui/layouts
+cp -r rog-aura/data/layouts/*.ron %{buildroot}%{_datadir}/rog-gui/layouts/
+
+# Install icons
+install -D -m 0644 data/icons/asus_notif_yellow.png %{buildroot}%{_datadir}/icons/hicolor/512x512/apps/asus_notif_yellow.png
+install -D -m 0644 data/icons/asus_notif_green.png %{buildroot}%{_datadir}/icons/hicolor/512x512/apps/asus_notif_green.png
+install -D -m 0644 data/icons/asus_notif_blue.png %{buildroot}%{_datadir}/icons/hicolor/512x512/apps/asus_notif_blue.png
+install -D -m 0644 data/icons/asus_notif_red.png %{buildroot}%{_datadir}/icons/hicolor/512x512/apps/asus_notif_red.png
+install -D -m 0644 data/icons/asus_notif_orange.png %{buildroot}%{_datadir}/icons/hicolor/512x512/apps/asus_notif_orange.png
+install -D -m 0644 data/icons/asus_notif_white.png %{buildroot}%{_datadir}/icons/hicolor/512x512/apps/asus_notif_white.png
+install -D -m 0644 data/icons/scalable/gpu-compute.svg %{buildroot}%{_datadir}/icons/hicolor/scalable/status/gpu-compute.svg
+install -D -m 0644 data/icons/scalable/gpu-hybrid.svg %{buildroot}%{_datadir}/icons/hicolor/scalable/status/gpu-hybrid.svg
+install -D -m 0644 data/icons/scalable/gpu-integrated.svg %{buildroot}%{_datadir}/icons/hicolor/scalable/status/gpu-integrated.svg
+install -D -m 0644 data/icons/scalable/gpu-nvidia.svg %{buildroot}%{_datadir}/icons/hicolor/scalable/status/gpu-nvidia.svg
+install -D -m 0644 data/icons/scalable/gpu-vfio.svg %{buildroot}%{_datadir}/icons/hicolor/scalable/status/gpu-vfio.svg
+install -D -m 0644 data/icons/scalable/notification-reboot.svg %{buildroot}%{_datadir}/icons/hicolor/scalable/status/notification-reboot.svg
+
+# Install docs
+install -D -m 0644 README.md %{buildroot}%{_docdir}/%{name}/README.md
+install -D -m 0644 rog-anime/README.md %{buildroot}%{_docdir}/%{name}/README-anime.md
+install -D -m 0644 rog-anime/data/diagonal-template.png %{buildroot}%{_docdir}/%{name}/diagonal-template.png
+
+# Install LICENSE to asusctl datadir
+install -D -m 0644 LICENSE %{buildroot}%{_datadir}/asusctl/LICENSE
+
+desktop-file-validate %{buildroot}%{_datadir}/applications/rog-control-center.desktop
+
+%post
+%systemd_post asusd.service
+
+%preun
+%systemd_preun asusd.service
+
+%postun
+%systemd_postun_with_restart asusd.service
 
 %files
 %license LICENSE
@@ -101,8 +164,6 @@ desktop-file-validate %{buildroot}/%{_datadir}/applications/rog-control-center.d
 %{_unitdir}/asusd.service
 %{_userunitdir}/asusd-user.service
 %{_udevrulesdir}/99-asusd.rules
-#%dir %{_sysconfdir}/asusd/
-%{_datadir}/asusd/aura_support.ron
 %{_datadir}/dbus-1/system.d/asusd.conf
 %{_datadir}/icons/hicolor/512x512/apps/asus_notif_yellow.png
 %{_datadir}/icons/hicolor/512x512/apps/asus_notif_green.png
@@ -117,6 +178,7 @@ desktop-file-validate %{buildroot}/%{_datadir}/applications/rog-control-center.d
 %{_datadir}/icons/hicolor/scalable/status/gpu-vfio.svg
 %{_datadir}/icons/hicolor/scalable/status/notification-reboot.svg
 %{_docdir}/%{name}/
+%{_datadir}/asusctl/
 %{_datadir}/asusd/
 
 %files rog-gui

dmi-id/src/lib.rs

@@ -1,4 +1,4 @@
-use log::{info, warn};
+use log::warn;
 
 #[derive(Debug, Default, PartialEq, Eq, PartialOrd, Clone)]
 pub struct DMIID {
@@ -33,8 +33,6 @@ impl DMIID {
         })?;
 
         if let Some(device) = (result).next() {
-            info!("Found dmi ID info at {:?}", device.sysname());
-
             return Ok(Self {
                 id_model: device
                     .property_value("ID_MODEL")

extra/index.html

@@ -0,0 +1,23 @@
+<!doctype html>
+<html lang="en">
+<head>
+  <meta charset="utf-8">
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <title>asusctl docs</title>
+  <!-- Redirect to the generated crate docs -->
+  <meta http-equiv="refresh" content="0;url=asusctl/index.html">
+  <link rel="canonical" href="asusctl/index.html">
+  <style>
+    body { font-family: system-ui, -apple-system, "Segoe UI", Roboto, "Helvetica Neue", Arial; color:#222; display:flex; align-items:center; justify-content:center; height:100vh; margin:0 }
+    .box { text-align:center }
+    a { color: #0366d6 }
+  </style>
+</head>
+<body>
+  <div class="box">
+    <h1>asusctl documentation</h1>
+    <p>Redirecting to the generated docs — if your browser doesn't redirect automatically, <a href="asusctl/index.html">click here</a>.</p>
+    <p>If you expected a different landing page, update <code>extra/index.html</code> accordingly.</p>
+  </div>
+</body>
+</html>

rog-anime/Cargo.toml

@@ -28,17 +28,9 @@ gif.workspace = true
 log.workspace = true
 
 serde.workspace = true
-serde_derive.workspace = true
 
 glam.workspace = true
-typeshare.workspace = true
 
 zbus = { workspace = true, optional = true }
 
 dmi_id = { path = "../dmi-id", optional = true }
-
-[dev-dependencies]
-cargo-husky.workspace = true
-
-[package.metadata.cargo-machete]
-ignored = ["serde"]

rog-anime/src/data.rs

@@ -3,9 +3,9 @@ use std::str::FromStr;
 use std::thread::sleep;
 use std::time::{Duration, Instant};
 
+use dmi_id::DMIID;
 use log::info;
-use serde_derive::{Deserialize, Serialize};
-use typeshare::typeshare;
+use serde::{Deserialize, Serialize};
 #[cfg(feature = "dbus")]
 use zbus::zvariant::{OwnedValue, Type, Value};
 
@@ -22,15 +22,19 @@ const BLOCK_END: usize = 634;
 const PANE_LEN: usize = BLOCK_END - BLOCK_START;
 
 /// First packet is for GA401 + GA402
-pub const USB_PREFIX1: [u8; 7] = [0x5e, 0xc0, 0x02, 0x01, 0x00, 0x73, 0x02];
+pub const USB_PREFIX1: [u8; 7] = [
+    0x5e, 0xc0, 0x02, 0x01, 0x00, 0x73, 0x02,
+];
 /// Second packet is for GA401 + GA402
-pub const USB_PREFIX2: [u8; 7] = [0x5e, 0xc0, 0x02, 0x74, 0x02, 0x73, 0x02];
+pub const USB_PREFIX2: [u8; 7] = [
+    0x5e, 0xc0, 0x02, 0x74, 0x02, 0x73, 0x02,
+];
 /// Third packet is for GA402 matrix
-pub const USB_PREFIX3: [u8; 7] = [0x5e, 0xc0, 0x02, 0xe7, 0x04, 0x73, 0x02];
+pub const USB_PREFIX3: [u8; 7] = [
+    0x5e, 0xc0, 0x02, 0xe7, 0x04, 0x73, 0x02,
+];
 
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type, Value, OwnedValue))]
-#[typeshare]
 #[derive(Default, Deserialize, PartialEq, Eq, Clone, Copy, Serialize, Debug)]
 pub struct Animations {
     pub boot: AnimBooting,
@@ -40,9 +44,7 @@ pub struct Animations {
 }
 
 // TODO: move this out
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type))]
-#[typeshare]
 #[derive(Debug, PartialEq, Eq, Copy, Clone, Deserialize, Serialize)]
 pub struct DeviceState {
     pub display_enabled: bool,
@@ -55,34 +57,61 @@ pub struct DeviceState {
     pub brightness_on_battery: Brightness,
 }
 
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type), zvariant(signature = "s"))]
-#[derive(Debug, Copy, Clone, PartialEq, Eq, Deserialize, Serialize)]
+#[derive(Debug, Copy, Clone, PartialEq, Eq, Deserialize, Serialize, Default)]
 pub enum AnimeType {
     GA401,
     GA402,
     GU604,
-    Unknown,
+    G635L,
+    G835L,
+    #[default]
+    Unsupported,
 }
 
 impl FromStr for AnimeType {
     type Err = AnimeError;
 
     fn from_str(s: &str) -> std::result::Result<Self, Self::Err> {
-        Ok(match s {
-            "ga401" | "GA401" => Self::GA401,
-            "ga402" | "GA402" => Self::GA402,
-            "gu604" | "GU604" => Self::GU604,
-            _ => Self::Unknown,
-        })
+        let dmi = s.to_uppercase();
+
+        if dmi.contains("GA401") {
+            return Ok(Self::GA401);
+        } else if dmi.contains("GA402") {
+            return Ok(Self::GA402);
+        } else if dmi.contains("GU604") {
+            return Ok(Self::GU604);
+        } else if dmi.contains("G635L") {
+            return Ok(Self::G635L);
+        } else if dmi.contains("G835L") {
+            return Ok(Self::G835L);
+        }
+
+        Ok(Self::Unsupported)
     }
 }
 
 impl AnimeType {
+    pub fn from_dmi() -> Self {
+        let board_name = DMIID::new().unwrap_or_default().board_name.to_uppercase();
+        if board_name.contains("GA401I") || board_name.contains("GA401Q") {
+            AnimeType::GA401
+        } else if board_name.contains("GA402R") || board_name.contains("GA402X") {
+            AnimeType::GA402
+        } else if board_name.contains("GU604V") {
+            AnimeType::GU604
+        } else if board_name.contains("G635L") || board_name.contains("G635L") {
+            AnimeType::G635L
+        } else {
+            AnimeType::Unsupported
+        }
+    }
+
     /// The width of diagonal images
     pub fn width(&self) -> usize {
         match self {
             AnimeType::GU604 => 70,
+            AnimeType::G835L => 74,
             _ => 74,
         }
     }
@@ -92,6 +121,7 @@ impl AnimeType {
         match self {
             AnimeType::GA401 => 36,
             AnimeType::GU604 => 43,
+            AnimeType::G835L => 39,
             _ => 39,
         }
     }
@@ -101,6 +131,7 @@ impl AnimeType {
         match self {
             AnimeType::GA401 => PANE_LEN * 2,
             AnimeType::GU604 => PANE_LEN * 3,
+            AnimeType::G835L => PANE_LEN * 3,
             _ => PANE_LEN * 3,
         }
     }
@@ -165,7 +196,13 @@ impl TryFrom<AnimeDataBuffer> for AnimePacketType {
 
         let mut buffers = match anime.anime {
             AnimeType::GA401 => vec![[0; 640]; 2],
-            AnimeType::GA402 | AnimeType::GU604 | AnimeType::Unknown => vec![[0; 640]; 3],
+            AnimeType::GA402
+            | AnimeType::GU604
+            | AnimeType::G635L
+            | AnimeType::G835L
+            | AnimeType::Unsupported => {
+                vec![[0; 640]; 3]
+            }
         };
 
         for (idx, chunk) in anime.data.as_slice().chunks(PANE_LEN).enumerate() {
@@ -176,7 +213,11 @@ impl TryFrom<AnimeDataBuffer> for AnimePacketType {
 
         if matches!(
             anime.anime,
-            AnimeType::GA402 | AnimeType::GU604 | AnimeType::Unknown
+            AnimeType::GA402
+                | AnimeType::GU604
+                | AnimeType::G635L
+                | AnimeType::G835L
+                | AnimeType::Unsupported
         ) {
             buffers[2][..7].copy_from_slice(&USB_PREFIX3);
         }

rog-anime/src/diagonal.rs

@@ -3,6 +3,8 @@
 use std::path::Path;
 use std::time::Duration;
 
+use log::error;
+
 use crate::data::AnimeDataBuffer;
 use crate::error::{AnimeError, Result};
 use crate::AnimeType;
@@ -49,7 +51,10 @@ impl AnimeDiagonal {
         bright: f32,
         anime_type: AnimeType,
     ) -> Result<Self> {
-        let data = std::fs::read(path)?;
+        let data = std::fs::read(path).map_err(|e| {
+            error!("Could not open {path:?}: {e:?}");
+            e
+        })?;
         let data = std::io::Cursor::new(data);
         let decoder = png_pong::Decoder::new(data)?.into_steps();
         let png_pong::Step { raster, delay: _ } = decoder.last().ok_or(AnimeError::NoFrames)??;

rog-anime/src/gif.rs

@@ -4,7 +4,8 @@ use std::path::Path;
 use std::time::Duration;
 
 use glam::Vec2;
-use serde_derive::{Deserialize, Serialize};
+use log::error;
+use serde::{Deserialize, Serialize};
 
 use crate::error::{AnimeError, Result};
 use crate::{AnimeDataBuffer, AnimeDiagonal, AnimeImage, AnimeType, Pixel};
@@ -107,7 +108,10 @@ impl AnimeGif {
         // Configure the decoder such that it will expand the image to RGBA.
         decoder.set_color_output(gif::ColorOutput::RGBA);
         // Read the file header
-        let file = File::open(file_name)?;
+        let file = File::open(file_name).map_err(|e| {
+            error!("Could not open {file_name:?}: {e:?}");
+            e
+        })?;
         let mut decoder = decoder.read_info(file)?;
 
         let mut frames = Vec::default();
@@ -186,12 +190,14 @@ impl AnimeGif {
         anime_type: AnimeType,
     ) -> Result<Self> {
         let mut frames = Vec::new();
-
         let mut decoder = gif::DecodeOptions::new();
         // Configure the decoder such that it will expand the image to RGBA.
         decoder.set_color_output(gif::ColorOutput::RGBA);
         // Read the file header
-        let file = File::open(file_name)?;
+        let file = File::open(file_name).map_err(|e| {
+            error!("Could not open {file_name:?}: {e:?}");
+            e
+        })?;
         let mut decoder = decoder.read_info(file)?;
 
         let height = decoder.height();

rog-anime/src/image.rs

@@ -3,6 +3,7 @@ use std::path::Path;
 
 pub use glam::Vec2;
 use glam::{Mat3, Vec3};
+use log::error;
 
 use crate::data::AnimeDataBuffer;
 use crate::error::{AnimeError, Result};
@@ -168,7 +169,7 @@ impl AnimeImage {
                     // first 5 rows for GA401 are always at X = 0
                     return 0;
                 }
-                (y + 1) / 2 - 3
+                y.div_ceil(2) - 3
             }
             AnimeType::GU604 => {
                 // first 9 rows start at zero
@@ -184,7 +185,7 @@ impl AnimeImage {
                     return 0;
                 }
                 // and then their offset grows by one every two rows
-                (y + 1) / 2 - 5
+                y.div_ceil(2) - 5
             }
         }
     }
@@ -212,7 +213,7 @@ impl AnimeImage {
                     // First 5 rows for GA401 are always 33 physical LEDs long
                     return 33;
                 }
-                36 - (y + 1) / 2
+                36 - y.div_ceil(2)
             }
             AnimeType::GU604 => {
                 if y <= 9 {
@@ -320,7 +321,9 @@ impl AnimeImage {
             let pos = Vec3::new(led.x(), led.y(), 1.0);
             let x0 = led_from_px.mul_vec3(pos + Vec3::new(0.0, -0.5, 0.0));
 
-            const GROUP: [f32; 4] = [0.0, 0.5, 1.0, 1.5];
+            const GROUP: [f32; 4] = [
+                0.0, 0.5, 1.0, 1.5,
+            ];
             for u in &GROUP {
                 for v in &GROUP {
                     let sample = x0 + *u * du + *v * dv;
@@ -421,7 +424,10 @@ impl AnimeImage {
         bright: f32,
         anime_type: AnimeType,
     ) -> Result<Self> {
-        let data = std::fs::read(path)?;
+        let data = std::fs::read(path).map_err(|e| {
+            error!("Could not open {path:?}: {e:?}");
+            e
+        })?;
         let data = std::io::Cursor::new(data);
         let decoder = png_pong::Decoder::new(data)?.into_steps();
         let png_pong::Step { raster, delay: _ } = decoder.last().ok_or(AnimeError::NoFrames)??;

rog-anime/src/sequencer.rs

@@ -3,7 +3,7 @@ use std::path::PathBuf;
 use std::time::Duration;
 
 use glam::Vec2;
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 
 use crate::error::Result;
 use crate::{AnimTime, AnimeDataBuffer, AnimeDiagonal, AnimeGif, AnimeImage, AnimeType};
@@ -75,10 +75,7 @@ impl ActionData {
                 time,
                 brightness,
             } => ActionData::Animation(AnimeGif::from_diagonal_gif(
-                file,
-                *time,
-                *brightness,
-                anime_type,
+                file, *time, *brightness, anime_type,
             )?),
             ActionLoader::AsusImage {
                 file,
@@ -91,10 +88,7 @@ impl ActionData {
                     ActionData::Image(Box::new(data))
                 }
                 _ => ActionData::Animation(AnimeGif::from_diagonal_png(
-                    file,
-                    anime_type,
-                    *time,
-                    *brightness,
+                    file, anime_type, *time, *brightness,
                 )?),
             },
             ActionLoader::ImageAnimation {
@@ -108,24 +102,12 @@ impl ActionData {
                 if let Some(ext) = file.extension() {
                     if ext.to_string_lossy().to_lowercase() == "png" {
                         return Ok(ActionData::Animation(AnimeGif::from_png(
-                            file,
-                            *scale,
-                            *angle,
-                            *translation,
-                            *time,
-                            *brightness,
-                            anime_type,
+                            file, *scale, *angle, *translation, *time, *brightness, anime_type,
                         )?));
                     }
                 }
                 ActionData::Animation(AnimeGif::from_gif(
-                    file,
-                    *scale,
-                    *angle,
-                    *translation,
-                    *time,
-                    *brightness,
-                    anime_type,
+                    file, *scale, *angle, *translation, *time, *brightness, anime_type,
                 )?)
             }
             ActionLoader::Image {
@@ -140,24 +122,13 @@ impl ActionData {
                     AnimTime::Infinite => {
                         // If no time then create a plain static image
                         let image = AnimeImage::from_png(
-                            file,
-                            *scale,
-                            *angle,
-                            *translation,
-                            *brightness,
-                            anime_type,
+                            file, *scale, *angle, *translation, *brightness, anime_type,
                         )?;
                         let data = <AnimeDataBuffer>::try_from(&image)?;
                         ActionData::Image(Box::new(data))
                     }
                     _ => ActionData::Animation(AnimeGif::from_png(
-                        file,
-                        *scale,
-                        *angle,
-                        *translation,
-                        *time,
-                        *brightness,
-                        anime_type,
+                        file, *scale, *angle, *translation, *time, *brightness, anime_type,
                     )?),
                 }
             }

rog-anime/src/usb.rs

@@ -11,8 +11,7 @@
 use std::str::FromStr;
 
 use dmi_id::DMIID;
-use serde_derive::{Deserialize, Serialize};
-use typeshare::typeshare;
+use serde::{Deserialize, Serialize};
 #[cfg(feature = "dbus")]
 use zbus::zvariant::{OwnedValue, Type, Value};
 
@@ -29,7 +28,6 @@ pub const PROD_ID: u16 = 0x193b;
     derive(Type, Value, OwnedValue),
     zvariant(signature = "u")
 )]
-#[typeshare]
 #[derive(Debug, Default, PartialEq, Eq, Copy, Clone, Deserialize, Serialize)]
 /// Base LED brightness of the display
 pub enum Brightness {
@@ -82,7 +80,6 @@ impl From<Brightness> for i32 {
     derive(Type, Value, OwnedValue),
     zvariant(signature = "s")
 )]
-#[typeshare]
 #[derive(Debug, Default, PartialEq, Eq, Copy, Clone, Deserialize, Serialize)]
 pub enum AnimBooting {
     #[default]
@@ -123,7 +120,6 @@ impl From<AnimBooting> for i32 {
     derive(Type, Value, OwnedValue),
     zvariant(signature = "s")
 )]
-#[typeshare]
 #[derive(Debug, Default, PartialEq, Eq, Copy, Clone, Deserialize, Serialize)]
 pub enum AnimAwake {
     #[default]
@@ -164,7 +160,6 @@ impl From<AnimAwake> for i32 {
     derive(Type, Value, OwnedValue),
     zvariant(signature = "s")
 )]
-#[typeshare]
 #[derive(Debug, Default, PartialEq, Eq, Copy, Clone, Deserialize, Serialize)]
 pub enum AnimSleeping {
     #[default]
@@ -205,7 +200,6 @@ impl From<AnimSleeping> for i32 {
     derive(Type, Value, OwnedValue),
     zvariant(signature = "s")
 )]
-#[typeshare]
 #[derive(Debug, Default, PartialEq, Eq, Copy, Clone, Deserialize, Serialize)]
 pub enum AnimShutdown {
     #[default]
@@ -241,25 +235,29 @@ impl From<AnimShutdown> for i32 {
     }
 }
 
-/// `get_anime_type` is very broad, matching on part of the laptop board name
-/// only. For this reason `find_node()` must be used also to verify if the USB
-/// device is available.
+/// `get_maybe_anime_type` is very broad, matching on part of the laptop board
+/// name only. For this reason `find_node()` must be used also to verify if the
+/// USB device is available.
 ///
 /// The currently known USB device is `19b6`.
 #[inline]
-pub fn get_anime_type() -> Result<AnimeType, AnimeError> {
-    let dmi = DMIID::new().map_err(|_| AnimeError::NoDevice)?; // TODO: better error
-    let board_name = dmi.board_name;
+pub fn get_anime_type() -> AnimeType {
+    let dmi = DMIID::new().unwrap_or_default();
+    let board_name = dmi.board_name.to_uppercase();
 
     if board_name.contains("GA401I") || board_name.contains("GA401Q") {
-        return Ok(AnimeType::GA401);
-    } else if board_name.contains("GA402R") {
-        return Ok(AnimeType::GA402);
+        AnimeType::GA401
+    } else if board_name.contains("GA402R") || board_name.contains("GA402X") {
+        AnimeType::GA402
     } else if board_name.contains("GU604V") {
-        return Ok(AnimeType::GU604);
+        AnimeType::GU604
+    } else if board_name.contains("G635L") {
+        AnimeType::G635L
+    } else if board_name.contains("G835L") {
+        AnimeType::G835L
+    } else {
+        AnimeType::Unsupported
     }
-    log::warn!("AniMe Matrix device found but not yet supported, will default to a GA402 layout");
-    Ok(AnimeType::Unknown)
 }
 
 /// Get the two device initialization packets. These are required for device

rog-aura/Cargo.toml

@@ -18,15 +18,10 @@ dbus = ["zbus"]
 
 [dependencies]
 serde.workspace = true
-serde_derive.workspace = true
 zbus = { workspace = true, optional = true }
 dmi_id = { path = "../dmi-id" }
 
 # cli and logging
 log.workspace = true
-typeshare.workspace = true
 
 ron = { version = "*", optional = true }
-
-[dev-dependencies]
-cargo-husky.workspace = true

rog-aura/data/layouts/g635l-per-key_US.ron

@@ -0,0 +1,375 @@
+(
+    locale: "US",
+    key_shapes: {
+        "regular": Led(
+            width: 1.0,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "regular_spacing": Blank(
+            width: 1.2,
+            height: 0.0,
+        ),
+        "rog_row": Led(
+            width: 1.0,
+            height: 0.7,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.6,
+        ),
+        "rog_row_blocking": Blank(
+            width: 1.2,
+            height: 0.0,
+        ),
+        "func_space": Blank(
+            width: 0.6,
+            height: 0.0,
+        ),
+        "backspace": Led(
+            width: 2.2,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "tab": Led(
+            width: 1.6,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "backslash": Led(
+            width: 1.6,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "capsplonk": Led(
+            width: 2.0,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "return": Led(
+            width: 2.4,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "lshift": Led(
+            width: 2.6,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "rshift": Led(
+            width: 3.0,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "lctrl": Led(
+            width: 1.4,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "spacebar": Led(
+            width: 5.8,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "rctrl": Led(
+            width: 1.2,
+            height: 1.0,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "up_arrow": Led(
+            width: 0.8,
+            height: 0.8,
+            pad_left: 1.1,
+            pad_right: 1.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+        ),
+        "arrows_spacer": Blank(
+            width: 15.0,
+            height: 0.0,
+        ),
+        "arrows": Led(
+            width: 0.8,
+            height: 0.8,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: -0.1,
+            pad_bottom: 0.1,
+        ),
+        "row_end_spacing": Blank(
+            width: 0.4,
+            height: 0.0,
+        ),
+        "lid_logo": Led(
+            width: 2.6,
+            height: 1.2,
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.8,
+            pad_bottom: 0.0,
+        ),
+        "lightbar_left": Led(
+            width: 0.6,
+            height: 3.6,
+            pad_left: -1.2,
+            pad_right: 0.2,
+            pad_top: -3.0,
+            pad_bottom: 0.3,
+        ),
+        "lightbar_corner_left": Led(
+            width: 0.8,
+            height: 0.6,
+            pad_left: -0.6,
+            pad_right: 0.2,
+            pad_top: 0.8,
+            pad_bottom: 0.0,
+        ),
+        "lightbar_bottom": Led(
+            width: 12.6,
+            height: 0.5,
+            pad_left: -0.1,
+            pad_right: -0.1,
+            pad_top: 0.8,
+            pad_bottom: 0.0,
+        ),
+        "lightbar_corner_right": Led(
+            width: 0.8,
+            height: 0.6,
+            pad_left: 0.0,
+            pad_right: 0.2,
+            pad_top: 0.8,
+            pad_bottom: 0.0,
+        ),
+        "lightbar_right": Led(
+            width: 0.6,
+            height: 3.6,
+            pad_left: -0.8,
+            pad_right: 0.2,
+            pad_top: -3.0,
+            pad_bottom: 0.3,
+        ),
+    },
+    key_rows: [
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (Blocking, "rog_row_blocking"),
+                (Blocking, "rog_row_blocking"),
+                (VolDown, "rog_row"),
+                (VolUp, "rog_row"),
+                (MicMute, "rog_row"),
+                (RogFan, "rog_row"),
+                (RogApp, "rog_row"),
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (Esc, "regular"),
+                (Spacing, "regular_spacing"),
+                (F1, "regular"),
+                (F2, "regular"),
+                (F3, "regular"),
+                (F4, "regular"),
+                (Spacing, "func_space"),
+                (F5, "regular"),
+                (F6, "regular"),
+                (F7, "regular"),
+                (F8, "regular"),
+                (Spacing, "func_space"),
+                (F9, "regular"),
+                (F10, "regular"),
+                (F11, "regular"),
+                (F12, "regular"),
+                (Spacing, "row_end_spacing"),
+                (Del, "regular"), // Should be super/insert
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (Tilde, "regular"),
+                (N1, "regular"),
+                (N2, "regular"),
+                (N3, "regular"),
+                (N4, "regular"),
+                (N5, "regular"),
+                (N6, "regular"),
+                (N7, "regular"),
+                (N8, "regular"),
+                (N9, "regular"),
+                (N0, "regular"),
+                (Hyphen, "regular"),
+                (Equals, "regular"),
+                (Backspace, "backspace"),
+                (Spacing, "row_end_spacing"),
+                (MediaPlay, "regular"),
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (Tab, "tab"),
+                (Q, "regular"),
+                (W, "regular"),
+                (E, "regular"),
+                (R, "regular"),
+                (T, "regular"),
+                (Y, "regular"),
+                (U, "regular"),
+                (I, "regular"),
+                (O, "regular"),
+                (P, "regular"),
+                (LBracket, "regular"),
+                (RBracket, "regular"),
+                (BackSlash, "backslash"),
+                (Spacing, "row_end_spacing"),
+                (MediaStop, "regular"),
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (Caps, "capsplonk"),
+                (A, "regular"),
+                (S, "regular"),
+                (D, "regular"),
+                (F, "regular"),
+                (G, "regular"),
+                (H, "regular"),
+                (J, "regular"),
+                (K, "regular"),
+                (L, "regular"),
+                (SemiColon, "regular"),
+                (Quote, "regular"),
+                (Return, "return"),
+                (Spacing, "row_end_spacing"),
+                (MediaNext, "regular"),
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (LShift, "lshift"),
+                (Z, "regular"),
+                (X, "regular"),
+                (C, "regular"),
+                (V, "regular"),
+                (B, "regular"),
+                (N, "regular"),
+                (M, "regular"),
+                (Comma, "regular"),
+                (Period, "regular"),
+                (FwdSlash, "regular"),
+                (Rshift, "rshift"),
+                (Spacing, "row_end_spacing"),
+                (MediaPrev, "regular"),
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (LCtrl, "lctrl"),
+                (LFn, "regular"),
+                (Meta, "regular"),
+                (LAlt, "regular"),
+                (Spacebar, "spacebar"),
+                (RAlt, "regular"),
+                (PrtSc, "regular"),
+                (RCtrl, "rctrl"),
+                (Up, "up_arrow"),
+                (Spacing, "row_end_spacing"),
+                (PrtSc, "regular"),
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (Spacing, "arrows_spacer"),
+                (Left, "arrows"),
+                (Down, "arrows"),
+                (Right, "arrows"),
+            ],
+        ),
+        (
+            pad_left: 6.5,
+            pad_right: 6.5,
+            pad_top: 0.2,
+            pad_bottom: 0.1,
+            row: [
+                (LidLogo, "lid_logo"),
+            ],
+        ),
+        (
+            pad_left: 0.1,
+            pad_right: 0.1,
+            pad_top: 0.1,
+            pad_bottom: 0.1,
+            row: [
+                (LightbarLeft, "lightbar_left"),
+                (LightbarLeftCorner, "lightbar_corner_left"),
+                (LightbarLeftBottom, "lightbar_bottom"),
+                (LightbarRightBottom, "lightbar_bottom"),
+                (LightbarRightCorner, "lightbar_corner_right"),
+                (LightbarRight, "lightbar_right"),
+            ],
+        ),
+    ],
+)

rog-aura/src/aura_detection.rs

@@ -1,6 +1,8 @@
+use std::env;
+
 use dmi_id::DMIID;
 use log::{error, info, warn};
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 
 use crate::keyboard::AdvancedAuraType;
 use crate::{AuraModeNum, AuraZone, PowerZones};
@@ -60,17 +62,20 @@ impl LedSupportData {
     /// matches against laptops first, then will proceed with matching the
     /// `device_name` if there are no DMI matches.
     pub fn get_data(product_id: &str) -> Self {
-        let dmi = DMIID::new().unwrap_or_default();
+        let mut dmi = DMIID::new().unwrap_or_default();
+        if let Ok(board_name) = env::var("BOARD_NAME") {
+            dmi.board_name = board_name;
+        }
         // let prod_family = dmi.product_family().expect("Could not get
         // product_family");
 
         if let Some(data) = LedSupportFile::load_from_supoprt_db() {
-            if let Some(data) = data.match_device(&dmi.board_name, product_id) {
-                return data;
-            }
+            return data.match_device(&dmi.board_name, product_id);
         }
-        info!("Using generic LED control for keyboard brightness only");
-        LedSupportData::default()
+        info!("Using generic LED control for keyboard brightness only. No aura_support file found");
+        let mut data = LedSupportData::default();
+        data.power_zones.push(PowerZones::Keyboard);
+        data
     }
 }
 
@@ -84,7 +89,7 @@ impl LedSupportFile {
 
     /// The list is stored in ordered format, so the iterator must be reversed
     /// to ensure we match to *whole names* first before doing a glob match
-    fn match_device(&self, device_name: &str, product_id: &str) -> Option<LedSupportData> {
+    fn match_device(&self, device_name: &str, product_id: &str) -> LedSupportData {
         for config in self.0.iter().rev() {
             if device_name.contains(&config.device_name) {
                 info!("Matched to {}", config.device_name);
@@ -92,15 +97,27 @@ impl LedSupportFile {
                     info!("Checking product ID");
                     if config.product_id == product_id {
                         info!("Matched to {}", config.product_id);
-                        return Some(config.clone());
+                        return config.clone();
                     } else {
                         continue;
                     }
                 }
-                return Some(config.clone());
+                return config.clone();
             }
         }
-        None
+        warn!(
+            "the aura_support.ron file has no entry for this model: {device_name}, {product_id}. \
+             Using a default"
+        );
+        LedSupportData {
+            device_name: device_name.to_owned(),
+            product_id: product_id.to_owned(),
+            layout_name: "Default".to_owned(),
+            basic_modes: vec![AuraModeNum::Static],
+            basic_zones: vec![],
+            advanced_type: AdvancedAuraType::None,
+            power_zones: vec![PowerZones::Keyboard],
+        }
     }
 
     /// Load `LedSupportFile` from the `aura_support.ron` file at
@@ -147,6 +164,25 @@ impl LedSupportFile {
             return Some(data);
         }
 
+        // If the system-wide files were not found (typical in CI or
+        // development environments), attempt to load the bundled
+        // `data/aura_support.ron` from the crate so tests and local runs
+        // behave the same as when the package is installed.
+        // Attempt to load a bundled `aura_support.ron` included at compile time.
+        // Using `include_str!` ensures the data is available regardless of
+        // runtime `CARGO_MANIFEST_DIR` or CI environment differences.
+        let bundled_buf = include_str!("../data/aura_support.ron");
+        if !bundled_buf.is_empty() {
+            if let Ok(tmp) = ron::from_str::<LedSupportFile>(bundled_buf) {
+                data.0.append(&mut tmp.0.clone());
+                data.0.sort_by(|a, b| a.device_name.cmp(&b.device_name));
+                info!("Loaded bundled LED support data (embedded)");
+                return Some(data);
+            } else {
+                warn!("Could not parse embedded bundled data file");
+            }
+        }
+
         warn!("Does {} exist?", ASUS_LED_MODE_USER_CONF);
         None
     }
@@ -154,6 +190,7 @@ impl LedSupportFile {
 
 #[cfg(test)]
 mod tests {
+    use std::collections::HashMap;
     use std::fs::OpenOptions;
     use std::io::Write;
     use std::path::PathBuf;
@@ -173,9 +210,16 @@ mod tests {
             product_id: String::new(),
             layout_name: "ga401".to_owned(),
             basic_modes: vec![AuraModeNum::Static],
-            basic_zones: vec![AuraZone::Key1, AuraZone::Logo, AuraZone::BarLeft],
+            basic_zones: vec![
+                AuraZone::Key1,
+                AuraZone::Logo,
+                AuraZone::BarLeft,
+            ],
             advanced_type: AdvancedAuraType::Zoned(vec![LedCode::LightbarRight]),
-            power_zones: vec![PowerZones::Keyboard, PowerZones::RearGlow],
+            power_zones: vec![
+                PowerZones::Keyboard,
+                PowerZones::RearGlow,
+            ],
         };
 
         assert!(ron::to_string(&led).is_ok());
@@ -195,6 +239,9 @@ mod tests {
         let mut tmp_sort = tmp.clone();
         tmp_sort.0.sort_by(|a, b| a.product_id.cmp(&b.product_id));
         tmp_sort.0.sort_by(|a, b| a.device_name.cmp(&b.device_name));
+        for model in tmp_sort.0.iter_mut() {
+            model.basic_modes.sort_by_key(|a| *a as u8);
+        }
         if tmp != tmp_sort {
             let sorted =
                 ron::ser::to_string_pretty(&tmp_sort, PrettyConfig::new().depth_limit(2)).unwrap();
@@ -217,4 +264,31 @@ mod tests {
             ron::ser::to_string_pretty(&tmp, my_config).unwrap()
         );
     }
+
+    #[test]
+    fn find_data_file_groups() {
+        let mut data = PathBuf::from(env!("CARGO_MANIFEST_DIR"));
+        data.push("data/aura_support.ron");
+
+        let buf = std::fs::read_to_string(&data).unwrap();
+
+        let tmp = ron::from_str::<LedSupportFile>(&buf).unwrap();
+
+        let mut modes: HashMap<Vec<AuraModeNum>, Vec<String>> = HashMap::new();
+
+        for entry in tmp.0 {
+            if let Some(modes) = modes.get_mut(&entry.basic_modes) {
+                modes.push(entry.device_name);
+            } else {
+                modes.insert(entry.basic_modes, vec![entry.device_name]);
+            }
+        }
+        dbg!(modes);
+
+        // let my_config = PrettyConfig::new().depth_limit(2);
+        // println!(
+        //     "RON: {}",
+        //     ron::ser::to_string_pretty(&tmp, my_config).unwrap()
+        // );
+    }
 }

rog-aura/src/builtin_modes.rs

@@ -1,15 +1,13 @@
 use std::fmt::Display;
 use std::str::FromStr;
 
-use serde_derive::{Deserialize, Serialize};
-use typeshare::typeshare;
+use serde::{Deserialize, Serialize};
 #[cfg(feature = "dbus")]
 use zbus::zvariant::{OwnedValue, Type, Value};
 
 use crate::error::Error;
-use crate::LED_MSG_LEN;
+use crate::AURA_LAPTOP_LED_MSG_LEN;
 
-#[typeshare]
 #[derive(Debug, Default, Copy, Clone, PartialEq, Eq, Deserialize, Serialize)]
 #[cfg_attr(
     feature = "dbus",
@@ -79,7 +77,6 @@ impl From<i32> for LedBrightness {
     }
 }
 
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type, Value, OwnedValue))]
 #[derive(Debug, Clone, PartialEq, Eq, Copy, Deserialize, Serialize)]
 pub struct Colour {
@@ -120,7 +117,11 @@ impl From<&[f32; 3]> for Colour {
 
 impl From<Colour> for [f32; 3] {
     fn from(c: Colour) -> Self {
-        [c.r as f32 / 255.0, c.g as f32 / 255.0, c.b as f32 / 255.0]
+        [
+            c.r as f32 / 255.0,
+            c.g as f32 / 255.0,
+            c.b as f32 / 255.0,
+        ]
     }
 }
 
@@ -136,11 +137,12 @@ impl From<&[u8; 3]> for Colour {
 
 impl From<Colour> for [u8; 3] {
     fn from(c: Colour) -> Self {
-        [c.r, c.g, c.b]
+        [
+            c.r, c.g, c.b,
+        ]
     }
 }
 
-#[typeshare]
 #[cfg_attr(
     feature = "dbus",
     derive(Type, Value, OwnedValue),
@@ -200,7 +202,6 @@ impl From<Speed> for u8 {
 /// Used for Rainbow mode.
 ///
 /// Enum corresponds to the required integer value
-#[typeshare]
 #[cfg_attr(
     feature = "dbus",
     derive(Type, Value, OwnedValue),
@@ -248,7 +249,6 @@ impl From<Direction> for i32 {
 }
 
 /// Enum of modes that convert to the actual number required by a USB HID packet
-#[typeshare]
 #[cfg_attr(
     feature = "dbus",
     derive(Type, Value, OwnedValue),
@@ -261,8 +261,8 @@ pub enum AuraModeNum {
     #[default]
     Static = 0,
     Breathe = 1,
-    Strobe = 2,
-    Rainbow = 3,
+    RainbowCycle = 2,
+    RainbowWave = 3,
     Star = 4,
     Rain = 5,
     Highlight = 6,
@@ -290,8 +290,8 @@ impl From<&AuraModeNum> for &str {
         match mode {
             AuraModeNum::Static => "Static",
             AuraModeNum::Breathe => "Breathe",
-            AuraModeNum::Strobe => "Strobe",
-            AuraModeNum::Rainbow => "Rainbow",
+            AuraModeNum::RainbowCycle => "RainbowCycle",
+            AuraModeNum::RainbowWave => "RainbowWave",
             AuraModeNum::Star => "Stars",
             AuraModeNum::Rain => "Rain",
             AuraModeNum::Highlight => "Highlight",
@@ -307,8 +307,8 @@ impl From<&str> for AuraModeNum {
     fn from(mode: &str) -> Self {
         match mode {
             "Breathe" => AuraModeNum::Breathe,
-            "Strobe" => AuraModeNum::Strobe,
-            "Rainbow" => AuraModeNum::Rainbow,
+            "RainbowCycle" => AuraModeNum::RainbowCycle,
+            "RainbowWave" => AuraModeNum::RainbowWave,
             "Stars" => AuraModeNum::Star,
             "Rain" => AuraModeNum::Rain,
             "Highlight" => AuraModeNum::Highlight,
@@ -326,8 +326,8 @@ impl From<u8> for AuraModeNum {
     fn from(mode: u8) -> Self {
         match mode {
             1 => AuraModeNum::Breathe,
-            2 => AuraModeNum::Strobe,
-            3 => AuraModeNum::Rainbow,
+            2 => AuraModeNum::RainbowCycle,
+            3 => AuraModeNum::RainbowWave,
             4 => AuraModeNum::Star,
             5 => AuraModeNum::Rain,
             6 => AuraModeNum::Highlight,
@@ -359,8 +359,13 @@ impl From<AuraEffect> for AuraModeNum {
     }
 }
 
+#[cfg(feature = "dbus")]
+impl zbus::zvariant::Basic for AuraModeNum {
+    const SIGNATURE_CHAR: char = 'u';
+    const SIGNATURE_STR: &'static str = "u";
+}
+
 /// Base effects have no zoning, while multizone is 1-4
-#[typeshare]
 #[cfg_attr(
     feature = "dbus",
     derive(Type, Value, OwnedValue),
@@ -432,9 +437,8 @@ impl From<AuraZone> for i32 {
 /// ```rust
 /// // let bytes: [u8; LED_MSG_LEN] = mode.into();
 /// ```
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type, Value, OwnedValue))]
-#[derive(Debug, Clone, Deserialize, Serialize)]
+#[derive(Debug, Clone, PartialEq, Deserialize, Serialize)]
 pub struct AuraEffect {
     /// The effect type
     pub mode: AuraModeNum,
@@ -494,56 +498,6 @@ impl Display for AuraEffect {
     }
 }
 
-pub struct AuraParameters {
-    pub zone: bool,
-    pub colour1: bool,
-    pub colour2: bool,
-    pub speed: bool,
-    pub direction: bool,
-}
-
-#[allow(clippy::fn_params_excessive_bools)]
-impl AuraParameters {
-    pub const fn new(
-        zone: bool,
-        colour1: bool,
-        colour2: bool,
-        speed: bool,
-        direction: bool,
-    ) -> Self {
-        Self {
-            zone,
-            colour1,
-            colour2,
-            speed,
-            direction,
-        }
-    }
-}
-
-impl AuraEffect {
-    /// A helper to provide detail on what effects have which parameters, e.g
-    /// the static factory mode accepts only one colour.
-    pub const fn allowed_parameters(mode: AuraModeNum) -> AuraParameters {
-        match mode {
-            AuraModeNum::Static
-            | AuraModeNum::Highlight
-            | AuraModeNum::Pulse
-            | AuraModeNum::Comet
-            | AuraModeNum::Flash => AuraParameters::new(true, true, false, false, false),
-            AuraModeNum::Breathe => AuraParameters::new(true, true, true, true, false),
-            AuraModeNum::Strobe | AuraModeNum::Rain => {
-                AuraParameters::new(true, false, false, true, false)
-            }
-            AuraModeNum::Rainbow => AuraParameters::new(true, false, false, true, true),
-            AuraModeNum::Star => AuraParameters::new(true, true, true, true, true),
-            AuraModeNum::Laser | AuraModeNum::Ripple => {
-                AuraParameters::new(true, true, false, true, false)
-            }
-        }
-    }
-}
-
 /// Parses `AuraEffect` in to packet data for writing to the USB interface
 ///
 /// Byte structure where colour is RGB, one byte per R, G, B:
@@ -552,9 +506,9 @@ impl AuraEffect {
 /// |---|---|-----|-----|---------|------|----------|---|-----------|
 /// |5d |b3 |Zone |Mode |Colour 1 |Speed |Direction |00 |Colour 2   |
 /// ```
-impl From<&AuraEffect> for [u8; LED_MSG_LEN] {
+impl From<&AuraEffect> for [u8; AURA_LAPTOP_LED_MSG_LEN] {
     fn from(aura: &AuraEffect) -> Self {
-        let mut msg = [0u8; LED_MSG_LEN];
+        let mut msg = [0u8; AURA_LAPTOP_LED_MSG_LEN];
         msg[0] = 0x5d;
         msg[1] = 0xb3;
         msg[2] = aura.zone as u8;
@@ -573,7 +527,7 @@ impl From<&AuraEffect> for [u8; LED_MSG_LEN] {
 
 impl From<&AuraEffect> for Vec<u8> {
     fn from(aura: &AuraEffect) -> Self {
-        let mut msg = vec![0u8; LED_MSG_LEN];
+        let mut msg = vec![0u8; AURA_LAPTOP_LED_MSG_LEN];
         msg[0] = 0x5d;
         msg[1] = 0xb3;
         msg[2] = aura.zone as u8;
@@ -592,7 +546,9 @@ impl From<&AuraEffect> for Vec<u8> {
 
 #[cfg(test)]
 mod tests {
-    use crate::{AuraEffect, AuraModeNum, AuraZone, Colour, Direction, Speed, LED_MSG_LEN};
+    use crate::{
+        AuraEffect, AuraModeNum, AuraZone, Colour, Direction, Speed, AURA_LAPTOP_LED_MSG_LEN,
+    };
 
     #[test]
     fn check_led_static_packet() {
@@ -608,7 +564,7 @@ mod tests {
             speed: Speed::Med,
             direction: Direction::Right,
         };
-        let ar = <[u8; LED_MSG_LEN]>::from(&st);
+        let ar = <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st);
 
         println!("{:02x?}", ar);
         let check = [
@@ -636,7 +592,10 @@ mod tests {
             0x5d, 0xb3, 0x01, 0x00, 0xff, 0x00, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
 
         st.zone = AuraZone::Key2;
         st.colour1 = Colour {
@@ -648,7 +607,10 @@ mod tests {
             0x5d, 0xb3, 0x02, 0x00, 0xff, 0xff, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
 
         st.zone = AuraZone::Key3;
         st.colour1 = Colour {
@@ -660,7 +622,10 @@ mod tests {
             0x5d, 0xb3, 0x03, 0x00, 0x00, 0xff, 0xff, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
 
         st.zone = AuraZone::Key4;
         st.colour1 = Colour {
@@ -672,7 +637,10 @@ mod tests {
             0x5d, 0xb3, 0x04, 0x00, 0xff, 0x00, 0xff, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
 
         st.zone = AuraZone::Logo;
         st.colour1 = Colour {
@@ -684,7 +652,10 @@ mod tests {
             0x5d, 0xb3, 0x05, 0x00, 0x2c, 0xff, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
 
         st.zone = AuraZone::BarLeft;
         st.colour1 = Colour {
@@ -696,7 +667,10 @@ mod tests {
             0x5d, 0xb3, 0x06, 0x00, 0xff, 0x00, 0x00, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
 
         st.zone = AuraZone::BarRight;
         st.colour1 = Colour {
@@ -708,13 +682,19 @@ mod tests {
             0x5d, 0xb3, 0x07, 0x00, 0xff, 0x00, 0xcd, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
 
-        st.mode = AuraModeNum::Rainbow;
+        st.mode = AuraModeNum::RainbowWave;
         let capture = [
             0x5d, 0xb3, 0x07, 0x03, 0xff, 0x00, 0xcd, 0xe1, 0x01, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
             0x0, 0x0,
         ];
-        assert_eq!(<[u8; LED_MSG_LEN]>::from(&st)[..9], capture[..9]);
+        assert_eq!(
+            <[u8; AURA_LAPTOP_LED_MSG_LEN]>::from(&st)[..9],
+            capture[..9]
+        );
     }
 }

rog-aura/src/effects/base.rs

@@ -2,6 +2,7 @@ use super::{EffectState, InputForEffect};
 use crate::keyboard::{KeyLayout, LedCode};
 use crate::Colour;
 
+#[allow(dead_code)]
 pub struct InputBased {
     led: LedCode,
     colour: Colour,

rog-aura/src/effects/mod.rs

@@ -1,4 +1,4 @@
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 
 mod doom;
 pub use doom::*;
@@ -12,7 +12,7 @@ pub use breathe::*;
 mod static_;
 pub use static_::*;
 
-use crate::keyboard::{KeyLayout, LedCode, LedUsbPackets, UsbPackets};
+use crate::keyboard::{AuraLaptopUsbPackets, KeyLayout, LedCode, LedUsbPackets};
 use crate::Colour;
 
 // static mut RNDINDEX: usize = 0;
@@ -106,7 +106,7 @@ impl AdvancedEffects {
         }
     }
 
-    pub fn create_packets(&self) -> UsbPackets {
+    pub fn create_packets(&self) -> AuraLaptopUsbPackets {
         let mut usb_packets = if self.zoned {
             // TODO: figure out if that single byte difference for multizone actually
             // matters

rog-aura/src/keyboard/advanced.rs

@@ -1,6 +1,5 @@
 use log::warn;
 use serde::{Deserialize, Serialize};
-use typeshare::typeshare;
 #[cfg(feature = "dbus")]
 use zbus::zvariant::Type;
 
@@ -194,8 +193,7 @@ impl LedCode {
 }
 
 /// Represents the per-key raw USB packets
-#[typeshare]
-pub type UsbPackets = Vec<Vec<u8>>;
+pub type AuraLaptopUsbPackets = Vec<Vec<u8>>;
 
 /// A `UsbPackets` contains all data to change the full set of keyboard
 /// key colours individually.
@@ -204,12 +202,11 @@ pub type UsbPackets = Vec<Vec<u8>>;
 /// to the keyboard EC. One row controls one group of keys, these keys are not
 /// necessarily all on the same row of the keyboard, with some splitting between
 /// two rows.
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type))]
 #[derive(Debug, Clone, Deserialize, Serialize)]
 pub struct LedUsbPackets {
     /// The packet data used to send data to the USB keyboard
-    usb_packets: UsbPackets,
+    usb_packets: AuraLaptopUsbPackets,
     /// Wether or not this packet collection is zoned. The determines which
     /// starting bytes are used and what the indexing is for lightbar RGB
     /// colours
@@ -472,22 +469,22 @@ impl LedUsbPackets {
     }
 
     #[inline]
-    pub fn get(&self) -> UsbPackets {
+    pub fn get(&self) -> AuraLaptopUsbPackets {
         self.usb_packets.clone()
     }
 
     #[inline]
-    pub fn get_ref(&self) -> &UsbPackets {
+    pub fn get_ref(&self) -> &AuraLaptopUsbPackets {
         &self.usb_packets
     }
 
     #[inline]
-    pub fn get_mut(&mut self) -> &mut UsbPackets {
+    pub fn get_mut(&mut self) -> &mut AuraLaptopUsbPackets {
         &mut self.usb_packets
     }
 }
 
-impl From<LedUsbPackets> for UsbPackets {
+impl From<LedUsbPackets> for AuraLaptopUsbPackets {
     fn from(k: LedUsbPackets) -> Self {
         k.usb_packets
     }
@@ -643,7 +640,7 @@ impl From<&LedCode> for &str {
 
 #[cfg(test)]
 mod tests {
-    use crate::keyboard::{LedCode, LedUsbPackets, UsbPackets};
+    use crate::keyboard::{AuraLaptopUsbPackets, LedCode, LedUsbPackets};
 
     macro_rules! colour_check_zoned {
         ($zone:expr, $pkt_idx_start:expr) => {
@@ -653,7 +650,7 @@ mod tests {
             c[1] = 255;
             c[2] = 255;
 
-            let pkt: UsbPackets = zone.into();
+            let pkt: AuraLaptopUsbPackets = zone.into();
             assert_eq!(pkt[0][$pkt_idx_start], 0xff);
             assert_eq!(pkt[0][$pkt_idx_start + 1], 0xff);
             assert_eq!(pkt[0][$pkt_idx_start + 2], 0xff);
@@ -663,7 +660,7 @@ mod tests {
     #[test]
     fn zone_to_packet_check() {
         let zone = LedUsbPackets::new_zoned(true);
-        let pkt: UsbPackets = zone.into();
+        let pkt: AuraLaptopUsbPackets = zone.into();
         assert_eq!(pkt[0][0], 0x5d);
         assert_eq!(pkt[0][1], 0xbc);
         assert_eq!(pkt[0][2], 0x01);
@@ -686,7 +683,7 @@ mod tests {
     #[test]
     fn perkey_to_packet_check() {
         let per_key = LedUsbPackets::new_per_key();
-        let pkt: UsbPackets = per_key.into();
+        let pkt: AuraLaptopUsbPackets = per_key.into();
         assert_eq!(pkt[0][0], 0x5d);
         assert_eq!(pkt[0][1], 0xbc);
         assert_eq!(pkt[0][2], 0x00);
@@ -712,7 +709,7 @@ mod tests {
         c[1] = 255;
         c[2] = 255;
 
-        let pkt: UsbPackets = per_key.into();
+        let pkt: AuraLaptopUsbPackets = per_key.into();
         assert_eq!(pkt[5][30], 0xff); // D, red
         assert_eq!(pkt[5][31], 0xff); // D
         assert_eq!(pkt[5][32], 0xff); // D

rog-aura/src/keyboard/layouts.rs

@@ -488,7 +488,7 @@ mod tests {
             let rows = &data.key_rows;
             for row in rows {
                 for k in &row.row {
-                    if data.key_shapes.get(&k.1).is_some() {
+                    if data.key_shapes.contains_key(&k.1) {
                         unused.remove(&k.1);
                     } else {
                         panic!("Key {:?} was missing matching shape {}", k.0, k.1);

rog-aura/src/keyboard/power.rs

@@ -5,7 +5,6 @@ use std::ops::{BitAnd, BitOr};
 
 use log::warn;
 use serde::{Deserialize, Serialize};
-use typeshare::typeshare;
 #[cfg(feature = "dbus")]
 use zbus::zvariant::{OwnedValue, Type, Value};
 
@@ -16,7 +15,6 @@ use crate::{AuraDeviceType, PowerZones};
 /// - 2021+, the struct is a single zone with 4 states
 /// - pre-2021, the struct is 1 or 2 zones and 3 states
 /// - Tuf, the struct is 1 zone and 3 states
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type, Value, OwnedValue))]
 #[derive(Clone, Copy, Debug, PartialEq, Eq, Serialize, Deserialize)]
 pub struct AuraPowerState {
@@ -53,7 +51,10 @@ impl AuraPowerState {
     }
 
     fn tuf_to_bytes(&self) -> Vec<u8> {
-        todo!("0s and 1s for bool array")
+        // &cmd, &boot, &awake, &sleep, &keyboard
+        vec![
+            1, self.boot as u8, self.awake as u8, self.sleep as u8, 1,
+        ]
     }
 
     /// # Bits for older 0x1866 keyboard model
@@ -81,10 +82,16 @@ impl AuraPowerState {
         if self.sleep {
             a |= OldAuraPower::Sleep as u32;
         }
-        if matches!(self.zone, PowerZones::Keyboard) {
+        if matches!(
+            self.zone,
+            PowerZones::Keyboard | PowerZones::KeyboardAndLightbar
+        ) {
             a |= OldAuraPower::Keyboard as u32;
         }
-        if matches!(self.zone, PowerZones::Lightbar) {
+        if matches!(
+            self.zone,
+            PowerZones::Lightbar | PowerZones::KeyboardAndLightbar
+        ) {
             a |= OldAuraPower::Lightbar as u32;
         }
         vec![
@@ -95,44 +102,49 @@ impl AuraPowerState {
         ]
     }
 
-    fn new_to_byte(&self) -> u32 {
+    pub fn new_to_byte(&self) -> u32 {
         match self.zone {
             PowerZones::Logo => {
                 self.boot as u32
-                    | (self.awake as u32) << 2
-                    | (self.sleep as u32) << 4
-                    | (self.shutdown as u32) << 6
+                    | ((self.awake as u32) << 2)
+                    | ((self.sleep as u32) << 4)
+                    | ((self.shutdown as u32) << 6)
+            }
+            PowerZones::Ally => {
+                (self.boot as u32)
+                    | ((self.awake as u32) << 1)
+                    | ((self.sleep as u32) << 2)
+                    | ((self.shutdown as u32) << 3)
             }
             PowerZones::Keyboard => {
-                (self.boot as u32) << 1
-                    | (self.awake as u32) << 3
-                    | (self.sleep as u32) << 5
-                    | (self.shutdown as u32) << 7
+                ((self.boot as u32) << 1)
+                    | ((self.awake as u32) << 3)
+                    | ((self.sleep as u32) << 5)
+                    | ((self.shutdown as u32) << 7)
             }
             PowerZones::Lightbar => {
-                (self.boot as u32) << (7 + 2)
-                    | (self.awake as u32) << (7 + 3)
-                    | (self.sleep as u32) << (7 + 4)
-                    | (self.shutdown as u32) << (7 + 5)
+                ((self.boot as u32) << (7 + 2))
+                    | ((self.awake as u32) << (7 + 3))
+                    | ((self.sleep as u32) << (7 + 4))
+                    | ((self.shutdown as u32) << (7 + 5))
             }
             PowerZones::Lid => {
-                (self.boot as u32) << (15 + 1)
-                    | (self.awake as u32) << (15 + 2)
-                    | (self.sleep as u32) << (15 + 3)
-                    | (self.shutdown as u32) << (15 + 4)
+                ((self.boot as u32) << (15 + 1))
+                    | ((self.awake as u32) << (15 + 2))
+                    | ((self.sleep as u32) << (15 + 3))
+                    | ((self.shutdown as u32) << (15 + 4))
             }
             PowerZones::RearGlow => {
-                (self.boot as u32) << (23 + 1)
-                    | (self.awake as u32) << (23 + 2)
-                    | (self.sleep as u32) << (23 + 3)
-                    | (self.shutdown as u32) << (23 + 4)
+                ((self.boot as u32) << (23 + 1))
+                    | ((self.awake as u32) << (23 + 2))
+                    | ((self.sleep as u32) << (23 + 3))
+                    | ((self.shutdown as u32) << (23 + 4))
             }
-            PowerZones::None => 0,
+            PowerZones::None | PowerZones::KeyboardAndLightbar => 0,
         }
     }
 }
 
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type, Value, OwnedValue))]
 #[derive(Clone, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
 pub struct LaptopAuraPower {
@@ -180,17 +192,21 @@ impl LaptopAuraPower {
     // TODO: use support data to setup correct zones
     pub fn new(aura_type: AuraDeviceType, support_data: &LedSupportData) -> Self {
         match aura_type {
-            AuraDeviceType::Unknown | AuraDeviceType::LaptopPost2021 => {
+            AuraDeviceType::Unknown | AuraDeviceType::Ally | AuraDeviceType::LaptopKeyboard2021 => {
                 let mut states = Vec::new();
                 for zone in support_data.power_zones.iter() {
                     states.push(AuraPowerState::default_for(*zone))
                 }
                 Self { states }
             }
-            AuraDeviceType::LaptopPre2021 => {
+            AuraDeviceType::LaptopKeyboardPre2021 => {
+                // The older devices are tri-state if have lightbar:
+                // 1. Keyboard
+                // 2. Lightbar
+                // 3. KeyboardAndLightbar
                 if support_data.power_zones.contains(&PowerZones::Lightbar) {
                     Self {
-                        states: vec![AuraPowerState::default_for(PowerZones::Lightbar)],
+                        states: vec![AuraPowerState::default_for(PowerZones::KeyboardAndLightbar)],
                     }
                 } else {
                     Self {
@@ -198,23 +214,48 @@ impl LaptopAuraPower {
                     }
                 }
             }
-            AuraDeviceType::LaptopTuf => Self {
+            AuraDeviceType::LaptopKeyboardTuf => Self {
                 states: vec![AuraPowerState::default_for(PowerZones::Keyboard)],
             },
             AuraDeviceType::ScsiExtDisk => todo!(),
+            AuraDeviceType::AnimeOrSlash => todo!(),
         }
     }
 
     pub fn to_bytes(&self, aura_type: AuraDeviceType) -> Vec<u8> {
+        if let Some(stuff) = self.states.first() {
+            if stuff.zone == PowerZones::Ally {
+                return vec![
+                    0x5d,
+                    0xd1,
+                    0x09,
+                    0x01,
+                    stuff.new_to_byte() as u8,
+                ];
+            }
+        }
         match aura_type {
-            AuraDeviceType::LaptopPost2021 => self.new_to_bytes(),
-            AuraDeviceType::LaptopPre2021 => self
-                .states
-                .first()
-                .cloned()
-                .unwrap_or_default()
-                .old_to_bytes(),
-            AuraDeviceType::LaptopTuf => self
+            AuraDeviceType::LaptopKeyboard2021 | AuraDeviceType::Ally => self.new_to_bytes(),
+            AuraDeviceType::LaptopKeyboardPre2021 => {
+                if self.states.len() == 1 {
+                    self.states
+                        .first()
+                        .cloned()
+                        .unwrap_or_default()
+                        .old_to_bytes()
+                } else {
+                    let mut bytes: Vec<Vec<u8>> =
+                        self.states.iter().map(|s| s.old_to_bytes()).collect();
+                    let mut b = bytes.pop().unwrap();
+                    for i in bytes {
+                        for (i, n) in i.iter().enumerate() {
+                            b[i] |= n;
+                        }
+                    }
+                    b
+                }
+            }
+            AuraDeviceType::LaptopKeyboardTuf => self
                 .states
                 .first()
                 .cloned()
@@ -224,7 +265,8 @@ impl LaptopAuraPower {
                 warn!("Trying to create bytes for an unknown device");
                 self.new_to_bytes()
             }
-            AuraDeviceType::ScsiExtDisk => todo!(),
+            AuraDeviceType::ScsiExtDisk => todo!("scsi disk not implemented yet"),
+            AuraDeviceType::AnimeOrSlash => todo!("anime/slash not implemented yet"),
         }
     }
 }
@@ -273,254 +315,297 @@ mod test {
     use crate::keyboard::{AuraPowerState, LaptopAuraPower};
     use crate::{AuraDeviceType, PowerZones};
 
+    fn to_binary_string_post2021(power: &LaptopAuraPower) -> String {
+        let bytes = power.to_bytes(AuraDeviceType::LaptopKeyboard2021);
+        format!(
+            "{:08b}, {:08b}, {:08b}, {:08b}",
+            bytes[0], bytes[1], bytes[2], bytes[3]
+        )
+    }
+
     #[test]
     fn check_0x1866_control_bytes() {
-        let state = AuraPowerState {
-            zone: PowerZones::Keyboard,
-            awake: true,
-            boot: false,
-            sleep: false,
-            shutdown: false,
+        let power = LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Keyboard,
+                    boot: false,
+                    awake: true,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         };
-        let bytes = state.old_to_bytes();
+        let bytes = power.to_bytes(AuraDeviceType::LaptopKeyboardPre2021);
         println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
         assert_eq!(bytes, [0x08, 0x00, 0x02, 0x00]);
 
-        let state = AuraPowerState {
-            zone: PowerZones::Lightbar,
-            awake: true,
-            boot: false,
-            sleep: false,
-            shutdown: false,
+        let power = LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lightbar,
+                    boot: false,
+                    awake: true,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         };
-        let bytes = state.old_to_bytes();
+        let bytes = power.to_bytes(AuraDeviceType::LaptopKeyboardPre2021);
         println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
         assert_eq!(bytes, [0x04, 0x05, 0x02, 0x00]);
 
-        let bytes = AuraPowerState {
-            zone: PowerZones::None,
-            awake: false,
-            boot: false,
-            sleep: true,
-            shutdown: false,
+        // let bytes = [
+        //     OldAuraPower::Keyboard,
+        //     OldAuraPower::Lightbar,
+        //     OldAuraPower::Awake,
+        //     OldAuraPower::Sleep,
+        //     OldAuraPower::Boot,
+        // ];
+        let power = LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Keyboard,
+                    boot: true,
+                    awake: true,
+                    sleep: true,
+                    shutdown: false,
+                },
+                AuraPowerState {
+                    zone: PowerZones::Lightbar,
+                    boot: true,
+                    awake: true,
+                    sleep: true,
+                    shutdown: false,
+                },
+            ],
         };
-        let bytes = bytes.old_to_bytes();
+        let bytes = power.to_bytes(AuraDeviceType::LaptopKeyboardPre2021);
         println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
-        assert_eq!(bytes, [0x30, 0x08, 0x04, 0x00]);
-
-        let bytes = AuraPowerState {
-            zone: PowerZones::None,
-            awake: false,
-            boot: true,
-            sleep: false,
-            shutdown: false,
-        };
-        let bytes = bytes.old_to_bytes();
-        println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
-        assert_eq!(bytes, [0xc3, 0x12, 0x09, 0x00]);
-
-        let power = AuraPowerState {
-            zone: PowerZones::Keyboard,
-            awake: true,
-            boot: true,
-            sleep: true,
-            shutdown: false,
-        };
-
-        let bytes = power.old_to_bytes();
-        println!("{:08b}, {:08b}, {:08b}", bytes[0], bytes[1], bytes[2]);
-        assert_eq!(bytes, [251, 26, 15, 0]);
+        assert_eq!(bytes, [0xff, 0x1f, 0x000f, 0x00]);
     }
 
     #[test]
     fn check_0x19b6_control_bytes_binary_rep() {
-        fn to_binary_string(power: &LaptopAuraPower) -> String {
-            let bytes = power.to_bytes(AuraDeviceType::LaptopPost2021);
-            format!(
-                "{:08b}, {:08b}, {:08b}, {:08b}",
-                bytes[0], bytes[1], bytes[2], bytes[3]
-            )
-        }
-
-        let boot_logo_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Logo,
-                boot: true,
-                awake: false,
-                sleep: false,
-                shutdown: false,
-            }],
+        let boot_logo_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Logo,
+                    boot: true,
+                    awake: false,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let boot_keyb_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Keyboard,
-                boot: true,
-                awake: false,
-                sleep: false,
-                shutdown: false,
-            }],
+        let boot_keyb_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Keyboard,
+                    boot: true,
+                    awake: false,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let sleep_logo = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Logo,
-                boot: false,
-                awake: false,
-                sleep: true,
-                shutdown: false,
-            }],
+        let sleep_logo = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Logo,
+                    boot: false,
+                    awake: false,
+                    sleep: true,
+                    shutdown: false,
+                },
+            ],
         });
-        let sleep_keyb = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Keyboard,
-                boot: false,
-                awake: false,
-                sleep: true,
-                shutdown: false,
-            }],
+        let sleep_keyb = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Keyboard,
+                    boot: false,
+                    awake: false,
+                    sleep: true,
+                    shutdown: false,
+                },
+            ],
         });
-        let awake_logo = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Logo,
-                boot: false,
-                awake: true,
-                sleep: false,
-                shutdown: false,
-            }],
+        let awake_logo = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Logo,
+                    boot: false,
+                    awake: true,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let awake_keyb = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Keyboard,
-                boot: false,
-                awake: true,
-                sleep: false,
-                shutdown: false,
-            }],
+        let awake_keyb = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Keyboard,
+                    boot: false,
+                    awake: true,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let shut_logo_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Logo,
-                boot: false,
-                awake: false,
-                sleep: false,
-                shutdown: true,
-            }],
+        let shut_logo_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Logo,
+                    boot: false,
+                    awake: false,
+                    sleep: false,
+                    shutdown: true,
+                },
+            ],
         });
-        let shut_keyb_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Keyboard,
-                boot: false,
-                awake: false,
-                sleep: false,
-                shutdown: true,
-            }],
+        let shut_keyb_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Keyboard,
+                    boot: false,
+                    awake: false,
+                    sleep: false,
+                    shutdown: true,
+                },
+            ],
         });
-        let boot_bar__ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lightbar,
-                boot: true,
-                awake: false,
-                sleep: false,
-                shutdown: false,
-            }],
+        let boot_bar__ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lightbar,
+                    boot: true,
+                    awake: false,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let awake_bar_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lightbar,
-                boot: false,
-                awake: true,
-                sleep: false,
-                shutdown: false,
-            }],
+        let awake_bar_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lightbar,
+                    boot: false,
+                    awake: true,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let sleep_bar_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lightbar,
-                boot: false,
-                awake: false,
-                sleep: true,
-                shutdown: false,
-            }],
+        let sleep_bar_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lightbar,
+                    boot: false,
+                    awake: false,
+                    sleep: true,
+                    shutdown: false,
+                },
+            ],
         });
-        let shut_bar__ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lightbar,
-                boot: false,
-                awake: false,
-                sleep: false,
-                shutdown: true,
-            }],
+        let shut_bar__ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lightbar,
+                    boot: false,
+                    awake: false,
+                    sleep: false,
+                    shutdown: true,
+                },
+            ],
         });
-        let boot_lid__ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lid,
-                boot: true,
-                awake: false,
-                sleep: false,
-                shutdown: false,
-            }],
+        let boot_lid__ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lid,
+                    boot: true,
+                    awake: false,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let awake_lid_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lid,
-                boot: false,
-                awake: true,
-                sleep: false,
-                shutdown: false,
-            }],
+        let awake_lid_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lid,
+                    boot: false,
+                    awake: true,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let sleep_lid_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lid,
-                boot: false,
-                awake: false,
-                sleep: true,
-                shutdown: false,
-            }],
+        let sleep_lid_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lid,
+                    boot: false,
+                    awake: false,
+                    sleep: true,
+                    shutdown: false,
+                },
+            ],
         });
-        let shut_lid__ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::Lid,
-                boot: false,
-                awake: false,
-                sleep: false,
-                shutdown: true,
-            }],
+        let shut_lid__ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::Lid,
+                    boot: false,
+                    awake: false,
+                    sleep: false,
+                    shutdown: true,
+                },
+            ],
         });
-        let boot_rear_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::RearGlow,
-                boot: true,
-                awake: false,
-                sleep: false,
-                shutdown: false,
-            }],
+        let boot_rear_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::RearGlow,
+                    boot: true,
+                    awake: false,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let awake_rear = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::RearGlow,
-                boot: false,
-                awake: true,
-                sleep: false,
-                shutdown: false,
-            }],
+        let awake_rear = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::RearGlow,
+                    boot: false,
+                    awake: true,
+                    sleep: false,
+                    shutdown: false,
+                },
+            ],
         });
-        let sleep_rear = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::RearGlow,
-                boot: false,
-                awake: false,
-                sleep: true,
-                shutdown: false,
-            }],
+        let sleep_rear = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::RearGlow,
+                    boot: false,
+                    awake: false,
+                    sleep: true,
+                    shutdown: false,
+                },
+            ],
         });
-        let shut_rear_ = to_binary_string(&LaptopAuraPower {
-            states: vec![AuraPowerState {
-                zone: PowerZones::RearGlow,
-                boot: false,
-                awake: false,
-                sleep: false,
-                shutdown: true,
-            }],
+        let shut_rear_ = to_binary_string_post2021(&LaptopAuraPower {
+            states: vec![
+                AuraPowerState {
+                    zone: PowerZones::RearGlow,
+                    boot: false,
+                    awake: false,
+                    sleep: false,
+                    shutdown: true,
+                },
+            ],
         });
 
         assert_eq!(boot_logo_, "00000001, 00000000, 00000000, 00000000");
@@ -548,7 +633,7 @@ mod test {
         assert_eq!(shut_rear_, "00000000, 00000000, 00000000, 00001000");
 
         // All on
-        let byte1 = to_binary_string(&LaptopAuraPower {
+        let byte1 = to_binary_string_post2021(&LaptopAuraPower {
             states: vec![
                 AuraPowerState {
                     zone: PowerZones::Keyboard,

rog-aura/src/lib.rs

@@ -6,7 +6,6 @@
 use std::fmt::Debug;
 
 use serde::{Deserialize, Serialize};
-use typeshare::typeshare;
 #[cfg(feature = "dbus")]
 use zbus::zvariant::{OwnedValue, Type, Value};
 
@@ -24,7 +23,7 @@ pub mod usb;
 
 pub mod keyboard;
 
-pub const LED_MSG_LEN: usize = 17;
+pub const AURA_LAPTOP_LED_MSG_LEN: usize = 17;
 pub const VERSION: &str = env!("CARGO_PKG_VERSION");
 
 pub const RED: Colour = Colour {
@@ -62,32 +61,39 @@ pub const ORANGE: Colour = Colour {
     g: 0xa4,
     b: 0x00,
 };
-pub const GRADIENT: [Colour; 7] = [RED, VIOLET, BLUE, TEAL, GREEN, YELLOW, ORANGE];
+pub const GRADIENT: [Colour; 7] = [
+    RED, VIOLET, BLUE, TEAL, GREEN, YELLOW, ORANGE,
+];
 
-#[typeshare]
 #[cfg_attr(feature = "dbus", derive(Type, Value, OwnedValue))]
 #[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Hash, Serialize, Deserialize)]
 pub enum AuraDeviceType {
     /// Most new laptops
     #[default]
-    LaptopPost2021 = 0,
-    LaptopPre2021 = 1,
-    LaptopTuf = 2,
+    LaptopKeyboard2021 = 0,
+    LaptopKeyboardPre2021 = 1,
+    LaptopKeyboardTuf = 2,
     ScsiExtDisk = 3,
+    Ally = 4,
+    AnimeOrSlash = 5,
     Unknown = 255,
 }
 
 impl AuraDeviceType {
     pub fn is_old_laptop(&self) -> bool {
-        *self == Self::LaptopPre2021
+        *self == Self::LaptopKeyboardPre2021
     }
 
     pub fn is_tuf_laptop(&self) -> bool {
-        *self == Self::LaptopTuf
+        *self == Self::LaptopKeyboardTuf
     }
 
     pub fn is_new_laptop(&self) -> bool {
-        *self == Self::LaptopPost2021
+        *self == Self::LaptopKeyboard2021
+    }
+
+    pub fn is_ally(&self) -> bool {
+        *self == Self::Ally
     }
 
     pub fn is_scsi(&self) -> bool {
@@ -98,16 +104,18 @@ impl AuraDeviceType {
 impl From<&str> for AuraDeviceType {
     fn from(s: &str) -> Self {
         match s.to_lowercase().trim_start_matches("0x") {
-            "tuf" => AuraDeviceType::LaptopTuf,
+            "tuf" => AuraDeviceType::LaptopKeyboardTuf,
             "1932" => AuraDeviceType::ScsiExtDisk,
-            "1866" | "18c6" | "1869" | "1854" => Self::LaptopPre2021,
-            _ => Self::LaptopPost2021,
+            "1866" | "18c6" | "1869" | "1854" => Self::LaptopKeyboardPre2021,
+            "1abe" | "1b4c" => Self::Ally,
+            "19b3" | "193b" => Self::AnimeOrSlash,
+            "19b6" => Self::LaptopKeyboard2021,
+            _ => Self::Unknown,
         }
     }
 }
 
 /// The powerr zones this laptop supports
-#[typeshare]
 #[cfg_attr(
     feature = "dbus",
     derive(Type, Value, OwnedValue),
@@ -126,5 +134,9 @@ pub enum PowerZones {
     Lid = 3,
     /// The led strip on the rear of some laptops
     RearGlow = 4,
+    /// Exists for the older 0x1866 models
+    KeyboardAndLightbar = 5,
+    /// Ally specific for creating correct packet
+    Ally = 6,
     None = 255,
 }

rog-aura/src/usb.rs

@@ -1,10 +1,7 @@
 // Only these two packets must be 17 bytes
-pub const LED_APPLY: [u8; 17] = [0x5d, 0xb4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-pub const LED_SET: [u8; 17] = [0x5d, 0xb5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-
-/// Writes out the correct byte string for brightness
-pub const fn aura_brightness_bytes(brightness: u8) -> [u8; 17] {
-    [
-        0x5a, 0xba, 0xc5, 0xc4, brightness, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-    ]
-}
+pub const AURA_LAPTOP_LED_APPLY: [u8; 17] = [
+    0x5d, 0xb4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+];
+pub const AURA_LAPTOP_LED_SET: [u8; 17] = [
+    0x5d, 0xb5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+];

rog-control-center/Cargo.toml

@@ -9,13 +9,18 @@ homepage.workspace = true
 edition.workspace = true
 
 [features]
-#default = ["mocking"]
-#mocking = []
+default = []
+mocking = []
+x11 = ["slint/backend-winit-x11"]
+# Optional tokio debug feature does not require nightly; remove RUSTFLAGS note.
+tokio-debug = ["console-subscriber"]
+rog_ally = []
 
 [dependencies]
-nix = { version = "^0.28.0", features = ["fs"] }
-tempfile = "3.3.0"
-betrayer = { version = "0.2.0" }
+console-subscriber = { version = "^0.4", optional = true }
+
+ksni = { version = "0.3", default-features = false, features = ["async-io"] }
+image = "0.25.5"
 
 asusd = { path = "../asusd" }
 config-traits = { path = "../config-traits" }
@@ -24,7 +29,7 @@ rog_dbus = { path = "../rog-dbus" }
 rog_aura = { path = "../rog-aura" }
 rog_profiles = { path = "../rog-profiles" }
 rog_platform = { path = "../rog-platform" }
-supergfxctl = { git = "https://gitlab.com/asus-linux/supergfxctl.git", rev = "4eb6e97c22b68ae8d1e80500709b0c0580776ad3", default-features = false }
+supergfxctl = { git = "https://gitlab.com/asus-linux/supergfxctl.git", default-features = false }
 dmi_id = { path = "../dmi-id" }
 
 gumdrop.workspace = true
@@ -33,11 +38,11 @@ env_logger.workspace = true
 
 tokio.workspace = true
 serde.workspace = true
-serde_derive.workspace = true
 zbus.workspace = true
 dirs.workspace = true
 notify-rust.workspace = true
 concat-idents.workspace = true
+futures-util.workspace = true
 
 versions.workspace = true
 
@@ -45,16 +50,26 @@ versions.workspace = true
 git = "https://github.com/slint-ui/slint.git"
 default-features = false
 features = [
-    "gettext",
     "compat-1-2",
-    "backend-linuxkms",
+    "gettext",
     "backend-winit-wayland",
-    "renderer-winit-femtovg",
+    "renderer-femtovg",
     # "renderer-skia-opengl",
 ]
 
 [build-dependencies.slint-build]
 git = "https://github.com/slint-ui/slint.git"
 
-[dev-dependencies]
-cargo-husky.workspace = true
+[package.metadata.deb]
+license-file = ["../LICENSE", "4"]
+extended-description = """\
+The dbus server for asusctl and rog-control-center applications."""
+depends = "$auto"
+section = "utility"
+priority = "optional"
+assets = [
+  ["target/release/rog-control-center", "usr/bin/", "755"],
+  ["../rog_gui-fakeinstall/usr/share/applications/*", "usr/share/share/applications/", "644"],
+  ["../rog_gui-fakeinstall/usr/share/icons/hicolor/512x512/apps/*", "usr/share/icons/hicolor/512x512/apps", "644"],
+  ["../rog_gui-fakeinstall/usr/share/icons/hicolor/scalable/status/*", "usr/share/icons/hicolor/scalable/status", "644"],
+]

rog-control-center/README.md

@@ -1,5 +1,9 @@
 # ROGALOG
 
+## X11 support
+
+X11 is not supported at all, as in I will not help you with X11 issues if there are any due to limited time and it being unmaintained itself. You can however build `rog-control-center` with it enabled `cargo build --features x11`.
+
 ### Translations
 
 You can help with translations by following https://slint.dev/releases/1.1.0/docs/slint/src/concepts/translations#translate-the-strings
@@ -8,4 +12,4 @@ Begin by copying `rog-control-center/translations/en/rog-control-center.po` to `
 
 Run `msgfmt rog-control-center/translations/<YOUR LOCALE>/rog-control-center.po -o rog-control-center/translations/<YOUR LOCALE>/LC_MESSAGES/rog-control-center.mo` to make the binary formatted translation where `<YOUR LOCALE>` is changed to your translation locale.
 
-To test you local translations run `RUST_TRANSLATIONS=1 rog-control-center`.
+To test you local translations run `RUST_TRANSLATIONS=1 rog-control-center`.

rog-control-center/build.rs

@@ -5,7 +5,6 @@ use slint_build::CompilerConfiguration;
 
 fn main() {
     // write_locales();
-
     let root = env!("CARGO_MANIFEST_DIR");
     let mut main = PathBuf::from_str(root).unwrap();
     main.push("ui/main_window.slint");
@@ -14,13 +13,12 @@ fn main() {
     include.push("ui");
 
     slint_build::print_rustc_flags().unwrap();
-    // slint_build::compile("ui/main_window.slint").unwrap();
     slint_build::compile_with_config(
         main,
         CompilerConfiguration::new()
             // .embed_resources(EmbedResourcesKind::EmbedFiles)
             .with_include_paths(vec![include])
-            .with_style("fluent-dark".into()),
+            .with_style("fluent".into()),
     )
     .unwrap();
 }

rog-control-center/data/rog-control-center.desktop

@@ -1,7 +1,6 @@
 [Desktop Entry]
 Version=1.0
 Type=Application
-
 Name=ROG Control Center
 Comment=Make your ASUS ROG Laptop go Brrrrr!
 Categories=Settings

rog-control-center/src/config.rs

@@ -1,7 +1,7 @@
 use std::fs::create_dir;
 
 use config_traits::{StdConfig, StdConfigLoad1};
-use serde_derive::{Deserialize, Serialize};
+use serde::{Deserialize, Serialize};
 
 use crate::notify::EnabledNotifications;
 

rog-control-center/src/error.rs

@@ -5,11 +5,11 @@ pub type Result<T> = std::result::Result<T, Error>;
 #[derive(Debug)]
 pub enum Error {
     Io(std::io::Error),
-    Nix(nix::Error),
     ConfigLoadFail,
     ConfigLockFail,
     XdgVars,
     Zbus(zbus::Error),
+    ZbusFdo(zbus::fdo::Error),
     Notification(notify_rust::error::Error),
 }
 
@@ -18,11 +18,11 @@ impl fmt::Display for Error {
     fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
             Error::Io(err) => write!(f, "Failed to open: {}", err),
-            Error::Nix(err) => write!(f, "Error: {}", err),
             Error::ConfigLoadFail => write!(f, "Failed to load user config"),
             Error::ConfigLockFail => write!(f, "Failed to lock user config"),
             Error::XdgVars => write!(f, "XDG environment vars appear unset"),
             Error::Zbus(err) => write!(f, "Error: {}", err),
+            Error::ZbusFdo(err) => write!(f, "Error: {}", err),
             Error::Notification(err) => write!(f, "Notification Error: {}", err),
         }
     }
@@ -36,18 +36,18 @@ impl From<std::io::Error> for Error {
     }
 }
 
-impl From<nix::Error> for Error {
-    fn from(err: nix::Error) -> Self {
-        Error::Nix(err)
-    }
-}
-
 impl From<zbus::Error> for Error {
     fn from(err: zbus::Error) -> Self {
         Error::Zbus(err)
     }
 }
 
+impl From<zbus::fdo::Error> for Error {
+    fn from(err: zbus::fdo::Error) -> Self {
+        Error::ZbusFdo(err)
+    }
+}
+
 impl From<notify_rust::error::Error> for Error {
     fn from(err: notify_rust::error::Error) -> Self {
         Error::Notification(err)

rog-control-center/src/lib.rs

@@ -2,14 +2,8 @@
 #![allow(clippy::redundant_clone, clippy::cmp_owned)]
 slint::include_modules!();
 
-// Intentionally reexport slint so that GUI consumers don't need to add to
-// `Cargo.toml`
-use std::fs::{remove_dir_all, File, OpenOptions};
-use std::io::{Read, Write};
-use std::process::exit;
-use std::thread::sleep;
-use std::time::Duration;
-
+/// Intentionally reexport slint so that GUI consumers don't need to add to
+/// `Cargo.toml`
 pub use slint;
 
 pub mod cli_options;
@@ -21,11 +15,7 @@ pub mod notify;
 pub mod tray;
 pub mod types;
 pub mod ui;
-
-use nix::sys::stat;
-use nix::unistd;
-use tempfile::TempDir;
-// use log::{error, info, warn};
+pub mod zbus_proxies;
 
 pub const VERSION: &str = env!("CARGO_PKG_VERSION");
 pub const APP_ICON_PATH: &str = "/usr/share/icons/hicolor/512x512/apps/rog-control-center.png";
@@ -42,10 +32,6 @@ pub fn print_versions() {
     println!("rog-platform v{}", rog_platform::VERSION);
 }
 
-pub const SHOWING_GUI: u8 = 1;
-pub const SHOW_GUI: u8 = 2;
-pub const QUIT_APP: u8 = 3;
-
 #[derive(PartialEq, Eq, Clone, Copy)]
 pub enum Page {
     AppSettings,
@@ -54,59 +40,3 @@ pub enum Page {
     AnimeMatrix,
     FanCurves,
 }
-
-/// Either exit the process, or return with a refreshed tmp-dir
-pub fn on_tmp_dir_exists() -> Result<TempDir, std::io::Error> {
-    let mut buf = [0u8; 2];
-    let path = std::env::temp_dir().join("rog-gui");
-
-    if path.read_dir()?.next().is_none() {
-        std::fs::remove_dir_all(path)?;
-        return tempfile::Builder::new()
-            .prefix("rog-gui")
-            .rand_bytes(0)
-            .tempdir();
-    }
-
-    let mut ipc_file = OpenOptions::new()
-        .read(true)
-        .write(true)
-        .create(false)
-        .open(path.join("ipc.pipe"))?;
-
-    // If the app is running this ends up stacked on top of SHOWING_GUI
-    ipc_file.write_all(&[SHOW_GUI, 0])?;
-    // tiny sleep to give the app a chance to respond
-    sleep(Duration::from_millis(10));
-    ipc_file.read_exact(&mut buf).ok();
-
-    // First entry is the actual state
-    if buf[0] == SHOWING_GUI {
-        ipc_file.write_all(&[SHOWING_GUI, 0])?; // Store state again as we drained the fifo
-                                                // Early exit is not an error and we don't want to pass back a dir
-        #[allow(clippy::exit)]
-        exit(0);
-    } else if buf[0] == SHOW_GUI {
-        remove_dir_all(&path)?;
-        return tempfile::Builder::new()
-            .prefix("rog-gui")
-            .rand_bytes(0)
-            .tempdir();
-    }
-    panic!("Invalid exit or app state");
-}
-
-pub fn get_ipc_file() -> Result<File, crate::error::Error> {
-    let tmp_dir = std::env::temp_dir().join("rog-gui");
-    let fifo_path = tmp_dir.join("ipc.pipe");
-    if let Err(e) = unistd::mkfifo(&fifo_path, stat::Mode::S_IRWXU) {
-        if !matches!(e, nix::errno::Errno::EEXIST) {
-            Err(e)?
-        }
-    }
-    Ok(OpenOptions::new()
-        .read(true)
-        .write(true)
-        // .truncate(true)
-        .open(&fifo_path)?)
-}