Bugfix: destroy the deref clone stackoverflow

Graphics switching now waits for user sessions to end

See merge request asus-linux/asus-nb-ctrl!31

.gitlab-ci.yml

@@ -13,7 +13,7 @@ test:
 
 build:
   only:
-    - next
+    - main
   script:
     - make && make vendor
   artifacts:

CHANGELOG.md

@@ -5,6 +5,141 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
 ## [Unreleased]
+# [3.1.6] - 2021-03-11
+### Changed
+- Graphics switching will now wait until all users logged out before switching 
+
+### Changed
+- Further tweaks to gfx switching
+- More logging on gfx switching
+- Filter bios help according to supported modes
+- Prevent gfx mode switching if in dedicated/G-Sync mode
+
+# [3.1.4] - 2021-03-10
+### Changed
+- Notify through dbus if user changes profile manually
+- Better help on CLI, show help only for supported items
+- Bugfix to gfx switcher
+
+# [3.1.3] - 2021-03-10
+### Changed
+- Hotfix: gracefully handle removing modules in use caused by display-manager not
+  fully shutdown at the time of trying to remove modules. It will now retry every
+  250ms per module
+
+# [3.1.2] - 2021-03-10
+### Changed
+- Test and create /etc/X11/xorg.conf.d/ if it doesn't exist
+- Hotfix to better report module issues
+
+# [3.1.1] - 2021-03-10
+### Changed
+- Add missing nvidia module nvidia_uvm to gfx ctrl list
+
+# [3.1.0] - 2021-03-09
+### Added
+- GU502LU led-modes
+### Changed
+- Graphics switching is now rebootless, the daemon will now restart the
+  display-manager to switch modes instead. Caveats are:
+  + There is no confirmation from the daemon, the program issuing the command
+    must confirm the request.
+  + systemd only
+- Laptops with dedicated Nvidia mode:
+  + You still must reboot for the bios to switch modes
+  + On boot if dedicated mode is active then asusd will update the required configs
+    to put display-manager in nvidia mode
+
+# [3.0.0] - 2021-02-22
+### Added
+- G531GD led modes
+
+# [3.0.0] - 2021-02-14
+### Changed
+- Write set+apply after each array in multizone
+- Remove misc bad logic
+- Use same code path as 0x1866 device to configure led support for 0x1854 device
+- Remove duplicate code
+- Set correct speeds for multizone
+- Remove dbus crate in favour of zbus. This removes the external dbus lib requirement.
+- Huge internal refactor
+- BREAKING CHANGE: Anime code refactor. DBUS method names have changed
+- Cleanup fan and cpu control + configs
+
+# [2.2.2] - 2021-01-31
+### Changed
+- Fix for dedicated gfx capable laptops in integrated mode
+- Fix for 0x1854 device
+
+# [2.2.1] - 2021-01-27
+### Added
+- Add ROG Zephyrus M15 LED config
+### Changed
+- Bugfixes
+- Fix reboot/restartx status for GFX switching
+- Update readme
+- Change CLI arg tag for fan modes
+- Make dracut include the nvidia modules in initramfs
+
+# [2.2.0] - 2021-01-26
+### Added
+- Dbus command to fetch all supported functions of the laptop. That is, all the
+  functions that asusd supports for the currently running laptop.
+- Bios setting toggles for:
+  + Dedicated gfx toggle (support depends on the laptop)
+  + Bios boot POST sound toggle
+### Changed
+- added config option for dedicated gfx mode on laptops with it to enable
+  switching directly to dedicated using `asusctl graphics -m nvidia`
+
+# [2.1.2] - 2021-01-10
+### Changed
+- Adjust gfx controller to assume that the graphics driver is loaded if the
+  mode is set for nvidia/hybrid
+
+# [2.1.1] - 2021-01-09
+### Changed
+- Updates to dependencies
+
+# [2.1.0] - 2020-10-25
+### Added
+- Option to turn off AniMe display (@asere)
+### Changed
+- Change option -k to show current LED bright (@asere)
+- Correctly disable GFX control via config
+- Panic and exit if config can't be parsed
+- Add DBUS method to toggle to next fan/thermal profile
+- Add DBUS method to toggle to next/prev Aura mode
+
+# [2.0.5] - 2020-09-29
+### Changed
+- Bugfixes
+
+# [2.0.4] - 2020-09-24
+### Changed
+- Better and more verbose error handling and logging in many places.
+- Fix timeout for client waiting on reply for graphics switching
+
+# [2.0.2] - 2020-09-21
+### Changed
+- graphics options via CLI are now a command block:
+  + `asusctl graphics`
+  + -m Mode <nvidia, hybrid, compute, integrated>
+  + -g Get current mode
+  + -f Force reboot or restart display manager without confirmation
+
+# [2.0.0] - 2020-09-21
+### Changed
+- Code refactor to spawn less tasks. Main loop will run only as fast as
+  it receives events
+- No-longer using tokio or async, reducing resource use
+### Added
+- A basic user daemon has been added for user notifications over dbus (XDG spec)
+- Added a user systemd service for notifications (asus-notify)
+- Graphics mode handling <iGPU only, dGPU only, or hybrid>, see asusctl --help
+### BREAKING CHANGES
+- asusd.conf has changed slightly and will overwrite old configs
+- All DBUS methods/signals/paths etc, are all updated and changed
 
 # [1.1.2] - 2020-09-10
 ### Changed

Cargo.toml

@@ -1,5 +1,5 @@
 [workspace]
-members = ["asus-nb-ctrl", "asus-nb"]
+members = ["asusctl", "asus-notify", "daemon", "rog-types", "rog-dbus"]
 
 [profile.release]
 lto = true
@@ -13,4 +13,4 @@ opt-level = 1
 
 [profile.bench]
 debug = false
-opt-level = 3
+opt-level = 3

Makefile

@@ -1,33 +1,37 @@
-prefix ?= /usr
-sysconfdir ?= /etc
+VERSION := $(shell grep -Pm1 'version = "(\d.\d.\d)"' daemon/Cargo.toml | cut -d'"' -f2)
+
+INSTALL = install
+INSTALL_PROGRAM = ${INSTALL} -D -m 0755
+INSTALL_DATA = ${INSTALL} -D -m 0644
+
+prefix = /usr
 exec_prefix = $(prefix)
 bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
 datarootdir = $(prefix)/share
-datadir = $(datarootdir)
+libdir = $(exec_prefix)/lib
+zshcpl = $(datarootdir)/zsh/site-functions
 
-SRC = Cargo.toml Cargo.lock Makefile $(shell find -type f -wholename '**/src/*.rs')
+BIN_C := asusctl
+BIN_D := asusd
+BIN_N := asus-notify
+LEDCFG := asusd-ledmodes.toml
+X11CFG := 90-nvidia-screen-G05.conf
+PMRULES := 90-asusd-nvidia-pm.rules
 
-.PHONY: all clean distclean install uninstall update
-
-BIN_C=asusctl
-BIN_D=asusd
-LEDCONFIG=asusd-ledmodes.toml
-VERSION:=$(shell grep -Pm1 'version = "(\d.\d.\d)"' asus-nb-ctrl/Cargo.toml | cut -d'"' -f2)
+SRC := Cargo.toml Cargo.lock Makefile $(shell find -type f -wholename '**/src/*.rs')
 
 DEBUG ?= 0
 ifeq ($(DEBUG),0)
-	ARGS += "--release"
+	ARGS += --release
 	TARGET = release
 endif
 
 VENDORED ?= 0
 ifeq ($(VENDORED),1)
-	ARGS += "--frozen"
+	ARGS += --frozen
 endif
 
-all: target/release/$(BIN_D)
+all: build
 
 clean:
 	cargo clean
@@ -35,20 +39,37 @@ clean:
 distclean:
 	rm -rf .cargo vendor vendor.tar.xz
 
-install: all
-	install -D -m 0755 "target/release/$(BIN_C)" "$(DESTDIR)$(bindir)/$(BIN_C)"
-	install -D -m 0755 "target/release/$(BIN_D)" "$(DESTDIR)$(bindir)/$(BIN_D)"
-	install -D -m 0644 "data/$(BIN_D).rules" "$(DESTDIR)/lib/udev/rules.d/99-$(BIN_D).rules"
-	install -D -m 0644 "data/$(LEDCONFIG)" "$(DESTDIR)$(sysconfdir)/asusd/$(LEDCONFIG)"
-	install -D -m 0644 "data/$(BIN_D).conf" "$(DESTDIR)$(sysconfdir)/dbus-1/system.d/$(BIN_D).conf"
-	install -D -m 0644 "data/$(BIN_D).service" "$(DESTDIR)/lib/systemd/system/$(BIN_D).service"
+install:
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_C)" "$(DESTDIR)$(bindir)/$(BIN_C)"
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_D)" "$(DESTDIR)$(bindir)/$(BIN_D)"
+	$(INSTALL_PROGRAM) "./target/release/$(BIN_N)" "$(DESTDIR)$(bindir)/$(BIN_N)"
+	$(INSTALL_DATA) "./data/$(PMRULES)" "$(DESTDIR)$(libdir)/udev/rules.d/$(PMRULES)"
+	$(INSTALL_DATA) "./data/$(BIN_D).rules" "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
+	$(INSTALL_DATA) "./data/$(LEDCFG)" "$(DESTDIR)/etc/asusd/$(LEDCFG)"
+	$(INSTALL_DATA) "./data/$(BIN_D).conf" "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
+	$(INSTALL_DATA) "./data/$(X11CFG)" "$(DESTDIR)$(datarootdir)/X11/xorg.conf.d/$(X11CFG)"
+	$(INSTALL_DATA) "./data/$(BIN_D).service" "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
+	$(INSTALL_DATA) "./data/$(BIN_N).service" "$(DESTDIR)$(libdir)/systemd/user/$(BIN_N).service"
+	$(INSTALL_DATA) "./data/icons/asus_notif_yellow.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_yellow.png"
+	$(INSTALL_DATA) "./data/icons/asus_notif_green.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_green.png"
+	$(INSTALL_DATA) "./data/icons/asus_notif_red.png" "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_red.png"
+	$(INSTALL_DATA) "./data/_asusctl" "$(DESTDIR)$(zshcpl)/_asusctl"
 
 uninstall:
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_C)"
 	rm -f "$(DESTDIR)$(bindir)/$(BIN_D)"
-	rm -f "$(DESTDIR)/lib/udev/rules.d/99-$(BIN_D).rules"
-	rm -f "$(DESTDIR)$(sysconfdir)/dbus-1/system.d/$(BIN_D).conf"
-	rm -f "$(DESTDIR)/lib/systemd/system/$(BIN_D).service"
+	rm -f "$(DESTDIR)$(bindir)/$(BIN_N)"
+	rm -f "$(DESTDIR)$(libdir)/udev/rules.d/$(PMRULES)"
+	rm -f "$(DESTDIR)$(libdir)/udev/rules.d/99-$(BIN_D).rules"
+	rm -f "$(DESTDIR)/etc/asusd/$(LEDCFG)"
+	rm -f "$(DESTDIR)$(datarootdir)/dbus-1/system.d/$(BIN_D).conf"
+	rm -f "$(DESTDIR)$(datarootdir)/X11/xorg.conf.d/$(X11CFG)"
+	rm -f "$(DESTDIR)$(libdir)/systemd/system/$(BIN_D).service"
+	rm -r "$(DESTDIR)$(libdir)/systemd/user/$(BIN_N).service"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_yellow.png"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_green.png"
+	rm -r "$(DESTDIR)$(datarootdir)/icons/hicolor/512x512/apps/asus_notif_red.png"
+	rm -f "$(DESTDIR)$(zshcpl)/_asusctl"
 
 update:
 	cargo update
@@ -62,9 +83,11 @@ vendor:
 	tar pcfJ vendor_asus-nb-ctrl_$(VERSION).tar.xz vendor
 	rm -rf vendor
 
-target/release/$(BIN_D): $(SRC)
+build:
 ifeq ($(VENDORED),1)
 	@echo "version = $(VERSION)"
 	tar pxf vendor_asus-nb-ctrl_$(VERSION).tar.xz
 endif
 	cargo build $(ARGS)
+
+.PHONY: all clean distclean install uninstall update build

README.md

@@ -1,10 +1,21 @@
 # ASUS NB Ctrl
 
+[![](https://www.paypalobjects.com/en_US/i/btn/btn_donate_LG.gif)](https://www.paypal.com/donate/?hosted_button_id=4V2DEPS7K6APC) - [Asus Linux Website](https://asus-linux.org/)
+
+`asusd` is a utility for Linux to control many aspects of various ASUS laptops
+but can also be used with non-asus laptops with reduced features.
+
 **NOTICE:**
 
-This program requires the kernel patch in `./kernel-patch/` to be applied.
-As of 04/08/2020 these have been submitted to lkml. Alternatively you may
-use the dkms module for 'hid-asus-rog` from one of the repositories [here](https://download.opensuse.org/repositories/home:/luke_nukem:/asus/).
+This app is developed and tested on fedora only. Support is not provided for Arch or Arch based distros.
+
+**NOTICE:**
+The following is *not* required for 5.11 kernel versions, as this version includes
+all the required patches.
+---
+This program requires the kernel patch [here](https://www.spinics.net/lists/linux-input/msg68977.html) to be applied.
+Alternatively you may use the dkms module for 'hid-asus-rog` from one of the
+repositories [here](https://download.opensuse.org/repositories/home:/luke_nukem:/asus/).
 
 The patch enables the following in kernel:
 
@@ -12,73 +23,91 @@ The patch enables the following in kernel:
 - Control of keyboard brightness using FN+Key combos (not RGB)
 - FN+F5 (fan) to toggle fan modes
 
-You will not get RGB control in kernel (yet), and asusd is still required to
-change modes and RGB settings. The previous version of this program is named
-`rog-core` and takes full control of the interfaces required - if you can't
-apply the kernel patches then `rog-core` is still highly usable.
+You will not get RGB control in kernel (yet), and `asusd` + `asusctl` is required
+to change modes and RGB settings.
 
 Many other patches for these laptops, AMD and Intel based, are working their way
 in to the kernel.
 
----
-asusd is a utility for Linux to control many aspects of various ASUS laptops.
-
 ## Discord
 
-[Discord server link](https://discord.gg/PVyFzWj)
+[Discord server link](https://discord.gg/ngbdKabAnP)
 
 ## SUPPORTED LAPTOPS
 
-If your laptop is not in the following lists, it may still work with fan-mode switching and charge limit control.
+Most ASUS gaming laptops that have a USB keyboard. If `lsusb` shows something similar
+to this:
 
-**Please help test or provide info for:**
+```
+Bus 001 Device 002: ID 0b05:1866 ASUSTek Computer, Inc. N-KEY Device
+```
 
-- GL703(0x1869)
-- GL553/GL753 (device = 0x1854) (attempted support from researching 2nd-hand info, multizone may work)
+then it may work without tweaks. Technically all other functions except the LED
+and AniMe parts should work regardless of your latop make. Eventually this project
+will probably suffer another rename once it becomes generic enough to do so.
 
-**Laptop support is modified on a per-case basis** as the EC for the keyboard varies
-a little between models, e.g, some RGB modes are missing, or it's a single colour.
-As far as I can see, the EC does not give us a way to find what modes are supported.
+## Implemented
 
-### ANIME AND OTHER FUNCTIONS
+- [X] System daemon
+- [X] User notifications daemon
+- [X] Setting/modifying built-in LED modes
+- [X] Per-key LED setting
+- [X] Fancy LED modes (See examples)
+- [X] Saving settings for reload
+- [X] Logging - required for journalctl
+- [X] AniMatrix display on G14 models that include it
+- [X] Set battery charge limit (with kernel supporting this)
+- [X] Fancy fan control on G14 + G15 thanks to @Yarn1
+- [X] Graphics mode switching between iGPU, dGPU, and On-Demand
+- [X] Toggle bios setting for boot/POST sound
+- [X] Toggle bios setting for "dedicated gfx" mode on supported laptops (g-sync)
 
-**AniMe device check is performed on start, if your device has one it will be detected.**
+# FUNCTIONS
 
-**NOTE:** If charge limit or fan modes are not working, then you may require a kernel newer than 5.6.10.
+## Graphics switching
 
-- [X] AniMe Matrix display
-- [X] Power profile switching on fan-mode (FN+F5)
-  - [X] Intel
-    - [X] Turbo enale/disable
-    - [X] Min frequency percentage
-    - [X] Max frequency percentage
-  - [X] AMD
-    - [X] Turbo enale/disable
-- [X] Battery charge limit
+A new feature has been added to enable switching graphics modes. This can be disabled
+in the config with `"manage_gfx": false,`. Additionally there is an extra setting
+for laptops capable of g-sync dedicated gfx mode to enable the graphics switching
+to switch on dedicated gfx for "nvidia" mode.
 
-**NOTE:** GA14/GA401 and GA15/GA502/GU502, You will need kernel [patches](https://lab.retarded.farm/zappel/asus-rog-zephyrus-g14/-/tree/master/kernel_patches).
+The CLI option for this does not require root until it asks for it, and provides
+instructions.
 
-### KEYBOARD BACKLIGHT MODES
+This switcher conflicts with other gpu switchers like optimus-manager, suse-prime
+or ubuntu-prime, system76-power, and bbswitch. If you have issues with `asusd`
+always defaulting to `integrated` mode on boot then you will need to check for
+stray configs blocking nvidia modules from loading in:
+- `/etc/modprobe.d/`
+- `/usr/lib/modprope.d/`
+
+### Power management udev rule
+
+If you have installed the Nvidia driver manually you will require the
+`data/90-asusd-nvidia-pm.rules` udev rule to be installed in `/etc/udev/rules.d/`.
+
+### fedora and openSUSE
+
+You *may* need a file `/etc/dracut.conf.d/90-nvidia-dracut-G05.conf` installed
+to stop dracut including the nvidia modules in the ramdisk. This is espeically
+true if you manually installed the nvidia drivers.
+
+```
+# filename /etc/dracut.conf.d/90-nvidia-dracut-G05.conf
+# Omit the nvidia driver from the ramdisk, to avoid needing to regenerate
+# the ramdisk on updates, and to ensure the power-management udev rules run
+# on module load
+omit_drivers+=" nvidia nvidia-drm nvidia-modeset nvidia-uvm "
+```
+
+and run `dracut -f` after creating it.
+
+## KEYBOARD BACKLIGHT MODES
 
 Models GA401, GA502, GU502 support LED brightness change only (no RGB).
 
-| MODEL  | STATIC | BREATHING | STROBE | RAINBOW | STAR | RAIN | HIGHLIGHT | LASER | RIPPLE | PULSE | COMET | FLASH | ZONES | PER-KEY RGB |
-|:------:|:------:|:---------:|:------:|:-------:|:----:|:----:|:---------:|:-----:|:------:|:-----:|:-----:|:-----:|:-----:|:-----------:|
-| G512LI |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |       |             |
-| G712LI |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |       |             |
-| GM501  |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| GX531  |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| G512   |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| G712   |   X    |     X     |    X   |    X    |      |      |           |       |        |       |       |       |   X   |             |
-| GX502  |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |       |     X       |
-| GX701  |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |       |     X       |
-| G531   |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |   X   |     X       |
-| G731   |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |   X   |     X       |
-| G532   |   X    |     X     |    X   |    X    |  X   |  X   |     X     |   X   |    X   |   X   |   X   |   X   |       |     X       |
-
-It is highly likely this doesn't cover all models.
-
-For editing the `/etc/asusd/asusd-ledmodes.toml`, the LED Mode numbers are as follows:
+If you model isn't getting the correct led modes, you can edit the file
+`/etc/asusd/asusd-ledmodes.toml`, the LED Mode numbers are as follows:
 
 ```
 0   STATIC
@@ -97,25 +126,29 @@ For editing the `/etc/asusd/asusd-ledmodes.toml`, the LED Mode numbers are as fo
 255 PER_KEY
 ```
 
-## Implemented
+use `cat /sys/class/dmi/id/product_name` to get details about your laptop.
 
-- [X] Daemon
-- [X] Setting/modifying built-in LED modes
-- [X] Per-key LED setting
-- [X] Fancy LED modes (See examples)
-- [X] Saving settings for reload
-- [X] Logging - required for journalctl
-- [X] AniMatrix display on G14 models that include it
-- [X] Set battery charge limit (with kernel supporting this)
+# Keybinds
 
-## Requirements for compiling
+To switch to next/previous Aura modes you will need to bind both the aura keys (if available) to one of:
+**Next**
+```
+asusctl led-mode -n
+```
+**Previous**
+```
+asusctl led-mode -p
+```
 
-- `rustc` + `cargo` + `make`
-- `libusb-1.0-0-dev`
-- `libdbus-1-dev`
-- `llvm`
-- `libclang-dev`
-- `libudev-dev`
+To switch Fan/Thermal profiles you need to bind the Fn+F5 key to `asusctl profile -n`.
+
+# BUILDING
+
+Requirements are rust >= 1.40 installed from rustup.io if the distro provided version is too old, and `make`.
+
+**Ubuntu*:** `apt install libclang-dev libudev-dev`
+
+**fedora:** `dnf install clang-devel systemd-devel`
 
 ## Installing
 
@@ -123,6 +156,8 @@ Packaging and auto-builds are available [here](https://build.opensuse.org/packag
 
 Download repositories are available [here](https://download.opensuse.org/repositories/home:/luke_nukem:/asus/)
 
+Alternatively check the releases page for f33 RPM.
+
 ---
 
 Run `make` then `sudo make install` then reboot.
@@ -136,32 +171,36 @@ If you are upgrading from a previous installed version, you will need to restart
 $ systemctl daemon-reload && systemctl restart asusd
 ```
 
-You may also need to activate the service for debian install. If running Pop!_OS, I suggest disabling `system76-power`
-gnome-shell extension, or at least limiting use of the power-management parts as `asusd` lets you set the same things
-(one or the other will overwrite pstates). I will create a shell extension at some point similar to system76, but using
-the asusd parts. It is safe to leave `system76-power.service` enabled and use for switching between graphics modes.
+You may also need to activate the service for debian install. If running Pop!_OS, I suggest disabling `system76-power` gnome-shell extension and systemd service.
+
+If you would like to run this daemon on another non-ASUS laptop you can. You'll
+have all features available except the LED and AniMe control (further controllers
+can be added on request). You will need to install the alternative service from
+`data/asusd-alt.service`.
 
 ## Uninstalling
 
-Run `sudo make uninstall` in the source repo, and remove `/etc/asusd.conf`.
+Run `sudo make uninstall` in the source repo, and remove `/etc/asusd/`.
 
 ## Updating
 
-Occasionally you need to remove `/etc/asusd.conf` and restart the daemon to create a new one. You *can* back up the old
-one and copy settings back over (then restart daemon again).
+If there has been a config file format change your config will be overwritten. This will
+become less of an issue once the feature set is nailed down. Work is happening to enable
+parsing of older configs and transferring settings to new.
 
-# Usage
+# USAGE
 
-**NOTE! Fan mode toggling requires a newer kernel**. I'm unsure when the patches required for it got merged - I've
-tested with the 5.6.6 kernel and above only. To see if the fan-mode changed cat either:
+**NOTE! Fan mode toggling requires a newer kernel**. I'm unsure when the patches
+required for it got merged - I've tested with the 5.6.6 kernel and above only.
+To see if the fan-mode changed cat either:
 
 - `cat /sys/devices/platform/asus-nb-wmi/throttle_thermal_policy` or
 - `cat /sys/devices/platform/asus-nb-wmi/fan_boost_mode`
 
 The numbers are 0 = Normal/Balanced, 1 = Boost, 2 = Silent.
 
-Running the program as a daemon manually will require root. Standard (non-daemon) mode expects to be communicating with
-the daemon mode over dbus.
+Running the program as a daemon manually will require root. Standard (non-daemon)
+mode expects to be communicating with the daemon mode over dbus.
 
 Commands are given by:
 
@@ -182,79 +221,6 @@ Some commands may have subcommands:
 asusctl <command> <subcommand> --help
 ```
 
-### Example
-
-```
-$ asusctl --help
-Usage: asusctl [OPTIONS]
-
-Optional arguments:
-  -h, --help             print help message
-  -v, --version          show program version number
-  -k, --kbd-bright VAL   <off, low, med, high>
-  -p, --pwr-profile PWR  <silent, normal, boost>
-  -c, --chg-limit CHRG   <20-100>
-
-Available commands:
-  led-mode  Set the keyboard lighting from built-in modes
-  profile   Create and configure profiles
-
-$ asusctl profile --help
-Usage: asusctl profile [OPTIONS]
-
-Positional arguments:
-  profile
-
-Optional arguments:
-  -h, --help         print help message
-  -c, --create       create the profile if it doesn't exist
-  -t, --turbo        enable cpu turbo (AMD)
-  -n, --no-turbo     disable cpu turbo (AMD)
-  -m, --min-percentage MIN-PERCENTAGE
-                     set min cpu scaling (intel)
-  -M, --max-percentage MAX-PERCENTAGE
-                     set max cpu scaling (intel)
-  -p, --preset PWR   <silent, normal, boost>
-  -C, --curve CURVE  set fan curve
-
-$ asusctl led-mode --help
-Usage: asusctl led-mode [OPTIONS]
-
-Optional arguments:
-  -h, --help  print help message
-
-Available commands:
-  static        set a single static colour
-  breathe       pulse between one or two colours
-  strobe        strobe through all colours
-  rainbow       rainbow cycling in one of four directions
-  star          rain pattern mimicking raindrops
-  rain          rain pattern of three preset colours
-  highlight     pressed keys are highlighted to fade
-  laser         pressed keys generate horizontal laser
-  ripple        pressed keys ripple outwards like a splash
-  pulse         set a rapid pulse
-  comet         set a vertical line zooming from left
-  flash         set a wide vertical line zooming from left
-  multi-static  4-zone multi-colour
-
-$ asusctl led-mode static --help
-Usage: asusctl led-mode static [OPTIONS]
-
-Optional arguments:
-  -h, --help  print help message
-  -c HEX      set the RGB value e.g, ff00ff
-
-$ asusctl led-mode star --help
-Usage: asusctl led-mode star [OPTIONS]
-
-Optional arguments:
-  -h, --help  print help message
-  -c HEX      set the first RGB value e.g, ff00ff
-  -C HEX      set the second RGB value e.g, ff00ff
-  -s SPEED    set the speed: low, med, high
-```
-
 ## Daemon mode
 
 If the daemon service is enabled then on boot the following will be reloaded from save:
@@ -268,27 +234,48 @@ The daemon also saves the settings per mode as the keyboard does not do this
 itself - this means cycling through modes with the Aura keys will use the
 settings that were used via CLI.
 
-Daemon mode creates a config file at `/etc/asusd.conf` which you can edit a 
+Daemon mode creates a config file at `/etc/asusd/asusd.conf` which you can edit a
 little of. Most parts will be byte arrays, but you can adjust things like
 `mode_performance`.
 
-### DBUS Input
+## User NOTIFICATIONS via dbus
+
+If you have a notifications handler set up, or are using KDE or Gnome then you
+can enable the user service to get basic notifications when something changes.
+
+```
+systemctl --user enable asus-notify.service
+systemctl --user start asus-notify.service
+```
+# OTHER
+
+## DBUS Input
 
 See [README_DBUS.md](./README_DBUS.md).
 
-### AniMe input
+## AniMe input
 
 You will want to look at what MeuMeu has done with [https://github.com/Meumeu/ZephyrusBling/](https://github.com/Meumeu/ZephyrusBling/)
 
-### Wireshark captures
-
-TODO: see `./wireshark_data/` for some captures.
-
-### Supporting more laptops
+## Supporting more laptops
 
 Please file a support request.
 
-## License
+## Notes:
+
+- If charge limit or fan modes are not working, then you may require a kernel newer than 5.6.10.
+- AniMe device check is performed on start, if your device has one it will be detected.
+- GA14/GA401 and GA15/GA502/GU502, You will need kernel [patches](https://lab.retarded.farm/zappel/asus-rog-zephyrus-g14/-/tree/master/kernel_patches), these are on their way to the kernel upstream.
+- On fedora manually installed Nvidia driver requires a dracut config as follows:
+```
+# filename/etc/dracut.conf.d/90-nvidia-dracut-G05.conf
+# Omit the nvidia driver from the ramdisk, to avoid needing to regenerate
+# the ramdisk on updates, and to ensure the power-management udev rules run
+# on module load
+omit_drivers+=" nvidia nvidia-drm nvidia-modeset nvidia-uvm "
+```
+
+# License
 
 Mozilla Public License 2 (MPL-2.0)
 

README_DBUS.md

@@ -1,31 +1,33 @@
 # DBUS Guide
 
-```rust
-pub static DBUS_NAME: &str = "org.asuslinux.Daemon";
-pub static DBUS_PATH: &str = "/org/asuslinux/Daemon";
-pub static DBUS_IFACE: &str = "org.asuslinux.Daemon";
-```
+**WARNING: In progress updates**
 
-## Methods
+Interface name = org.asuslinux.Daemon
 
-- `SetKeyBacklight`
-- `GetKeyBacklight`
-- `AnimatrixWrite`
-- `SetFanMode`
-- `GetFanMode`
-- `SetChargeLimit`
-- `GetChargeLimit`
-- `GetKeyBacklightModes`
+Paths:
+- `/org/asuslinux/Gfx`
+  + `SetVendor` (string)
+  + `NotifyVendor` (recv vendor label string)
+- `/org/asuslinux/Led`
+  + `LedMode` (AuraMode as json)
+  + `LedModes` (array[AuraMode] as json)
+  + `SetLedMode` (AuraMode -> json)
+  + `NotifyLed` (recv json data)
+- `/org/asuslinux/Anime`
+  + `SetAnime` (byte array data)
+- `/org/asuslinux/Charge`
+  + `Limit` (u8)
+  + `SetLimit` (u8)
+  + `NotifyCharge` (recv i8)
+- `/org/asuslinux/Profile`
+  + `Profile` (recv current profile data as json string)
+  + `Profiles` (recv profiles data as json string (map))
+  + `SetProfile` (event -> json)
+  + `NotifyProfile` (recv current profile name)
 
-## Signals
+All `Notify*` methods are signals.
 
-- `KeyBacklightChanged`
-- `FanModeChanged`
-- `ChargeLimitChanged`
-
-## Method Inputs
-
-### SetKeyBacklight
+### SetLed
 
 This method expects a string of JSON as input. The JSON is of format such:
 
@@ -66,23 +68,6 @@ dbus.
 
 Lastly, there is `"LedBrightness": <u8>` which accepts 0-3 for off, low, med, high.
 
-### GetKeyBacklight
-
-This method will return a JSON string in the same format as accepted by `SetKeyBacklight`.
-
-### GetKeyBacklightModes
-
-Will return a JSON string array of modes that this laptop accepts. The mode data
-within this will be the current settings per mode. Good for:
-
-- Getting supported modes
-- Getting all mode settings
-
-### AnimatrixWrite
-
-Used to write data to the AniMe display if available. Currently is takes `[[u8; 640]; 2]`
-which must be the byte data that will be written directly to the USB device.
-
 ### SetFanMode
 
 Accepts an integer from the following:
@@ -91,41 +76,13 @@ Accepts an integer from the following:
 - `1`: Boost mode
 - `2`: Silent mode
 
-### GetFanMode
-
-Returns the integer set from above.
-
-### SetChargeLimit
-
-Accepts an integer in the range of 20-100.
-
-### GetChargeLimit
-
-Returns the integer set from above.
-
-## Signal Outs
-
-### KeyBacklightChanged
-
-When emitted, it will emit the JSON data of the mode changed to, e.g:
+## dbus-send examples:
 
 ```
-{
-  "Static": {
-    "colour": [ 255, 0, 0]
-  }
-}
+dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Profile org.asuslinux.Daemon.NextProfile
 ```
 
-### FanModeChanged
-
-When emitted, it will include the integer the fan mode was changed to.
-
-### ChargeLimitChanged
-
-When emitted, it will include the integer the charging limit was changed to.
-
-## dbus-send examples
+## dbus-send examples OUTDATED
 
 ```
 dbus-send --system --type=method_call --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.asuslinux.Daemon.SetKeyBacklight string:'{"Static": {"colour": [ 80, 0, 40]}}'
@@ -154,5 +111,5 @@ Monitoring dbus while sending commands via `rog-core` will give you the json str
 ## Getting an introspection .xml
 
 ```
-dbus-send --system --print-reply --dest=org.asuslinux.Daemon /org/asuslinux/Daemon org.freedesktop.DBus.Introspectable.Introspect > xml/dbus-0.14.4.xml
+dbus-send --system --print-reply --dest=org.asuslinux.Daemon /org/asuslinux/Charge org.freedesktop.DBus.Introspectable.Introspect > xml/asusd-charge.xml
 ```

TODO.md

@@ -0,0 +1,7 @@
+# TODO
+
+- There is lots of code duplication. This should be turned in to macros (dbus stuff etc)
+- Add a little more information to profile notifications such as freq min/max, fan curves
+- Finish splitting out controllers to own crates
+- Finish move to zbus in client when zbus has client signal watch
+- Consider a rename again because the project is getting a lot less ASUS centric

asus-nb-ctrl/src/config.rs

@@ -1,150 +0,0 @@
-use asus_nb::aura_modes::AuraModes;
-use log::{error, warn};
-use rog_fan_curve::Curve;
-use serde_derive::{Deserialize, Serialize};
-use std::collections::BTreeMap;
-use std::fs::{File, OpenOptions};
-use std::io::{Read, Write};
-
-pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
-
-#[derive(Default, Deserialize, Serialize)]
-pub struct Config {
-    pub active_profile: String,
-    pub toggle_profiles: Vec<String>,
-    // TODO: remove power_profile
-    pub power_profile: u8,
-    pub bat_charge_limit: u8,
-    pub kbd_led_brightness: u8,
-    pub kbd_backlight_mode: u8,
-    pub kbd_backlight_modes: Vec<AuraModes>,
-    pub power_profiles: BTreeMap<String, Profile>,
-}
-
-impl Config {
-    /// `load` will attempt to read the config, but if it is not found it
-    /// will create a new default config and write that out.
-    pub fn load(mut self, supported_led_modes: &[u8]) -> Self {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .write(true)
-            .create(true)
-            .open(&CONFIG_PATH)
-            .unwrap(); // okay to cause panic here
-        let mut buf = String::new();
-        if let Ok(l) = file.read_to_string(&mut buf) {
-            if l == 0 {
-                self = Config::create_default(&mut file, &supported_led_modes);
-            } else {
-                self = serde_json::from_str(&buf).unwrap_or_else(|_| {
-                    warn!(
-                        "Could not deserialise {}. Overwriting with default",
-                        CONFIG_PATH
-                    );
-                    Config::create_default(&mut file, &supported_led_modes)
-                });
-            }
-        }
-        self
-    }
-
-    fn create_default(file: &mut File, supported_led_modes: &[u8]) -> Self {
-        // create a default config here
-        let mut c = Config::default();
-        c.bat_charge_limit = 100;
-        c.kbd_backlight_mode = 0;
-        c.kbd_led_brightness = 1;
-
-        for n in supported_led_modes {
-            c.kbd_backlight_modes.push(AuraModes::from(*n))
-        }
-
-        let profile = Profile::default();
-        c.power_profiles.insert("normal".into(), profile);
-        let mut profile = Profile::default();
-        profile.fan_preset = 1;
-        c.power_profiles.insert("boost".into(), profile);
-        let mut profile = Profile::default();
-        profile.fan_preset = 2;
-        c.power_profiles.insert("silent".into(), profile);
-
-        c.toggle_profiles.push("normal".into());
-        c.toggle_profiles.push("boost".into());
-        c.toggle_profiles.push("silent".into());
-        c.active_profile = "normal".into();
-
-        // Should be okay to unwrap this as is since it is a Default
-        let json = serde_json::to_string_pretty(&c).unwrap();
-        file.write_all(json.as_bytes())
-            .unwrap_or_else(|_| panic!("Could not write {}", CONFIG_PATH));
-        c
-    }
-
-    pub fn read(&mut self) {
-        let mut file = OpenOptions::new()
-            .read(true)
-            .open(&CONFIG_PATH)
-            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
-        let mut buf = String::new();
-        if let Ok(l) = file.read_to_string(&mut buf) {
-            if l == 0 {
-                warn!("File is empty {}", CONFIG_PATH);
-            } else {
-                let x: Config = serde_json::from_str(&buf)
-                    .unwrap_or_else(|_| panic!("Could not deserialise {}", CONFIG_PATH));
-                *self = x;
-            }
-        }
-    }
-
-    pub fn write(&self) {
-        let mut file = File::create(CONFIG_PATH).expect("Couldn't overwrite config");
-        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
-        file.write_all(json.as_bytes())
-            .unwrap_or_else(|err| error!("Could not write config: {}", err));
-    }
-
-    pub fn set_mode_data(&mut self, mode: AuraModes) {
-        let byte: u8 = (&mode).into();
-        for (index, n) in self.kbd_backlight_modes.iter().enumerate() {
-            if byte == u8::from(n) {
-                // Consume it, OMNOMNOMNOM
-                self.kbd_backlight_modes[index] = mode;
-                break;
-            }
-        }
-    }
-
-    pub fn get_led_mode_data(&self, num: u8) -> Option<&AuraModes> {
-        for mode in &self.kbd_backlight_modes {
-            if u8::from(mode) == num {
-                return Some(mode);
-            }
-        }
-        None
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub struct Profile {
-    pub min_percentage: u8,
-    pub max_percentage: u8,
-    pub turbo: bool,
-    pub fan_preset: u8,
-    pub fan_curve: Option<Curve>,
-}
-
-#[deprecated]
-pub type CPUSettings = Profile;
-
-impl Default for Profile {
-    fn default() -> Self {
-        Profile {
-            min_percentage: 0,
-            max_percentage: 100,
-            turbo: false,
-            fan_preset: 0,
-            fan_curve: None,
-        }
-    }
-}

asus-nb-ctrl/src/ctrl_anime.rs

@@ -1,216 +0,0 @@
-const INIT_STR: &str = "ASUS Tech.Inc.";
-const PACKET_SIZE: usize = 640;
-
-// Only these two packets must be 17 bytes
-const DEV_PAGE: u8 = 0x5e;
-// These bytes are in [1] position of the array
-const WRITE: u8 = 0xc0;
-const INIT: u8 = 0xc2;
-const APPLY: u8 = 0xc3;
-const SET: u8 = 0xc4;
-
-use crate::config::Config;
-use asus_nb::error::AuraError;
-use log::{error, info, warn};
-use rusb::{Device, DeviceHandle};
-use std::error::Error;
-use std::sync::Arc;
-use std::time::Duration;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-#[allow(dead_code)]
-#[derive(Debug)]
-pub enum AnimatrixCommand {
-    Apply,
-    Set,
-    WriteImage(Vec<Vec<u8>>),
-    //ReloadLast,
-}
-
-pub struct CtrlAnimeDisplay {
-    handle: DeviceHandle<rusb::GlobalContext>,
-    initialised: bool,
-}
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlAnimeDisplay {
-    type A = Vec<Vec<u8>>;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        mut self,
-        _: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        _: Option<Arc<SyncConnection>>,
-        _: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        vec![tokio::spawn(async move {
-            while let Some(image) = recv.recv().await {
-                self.do_command(AnimatrixCommand::WriteImage(image))
-                    .await
-                    .unwrap_or_else(|err| warn!("{}", err));
-            }
-        })]
-    }
-
-    async fn reload_from_config(&mut self, _: &mut Config) -> Result<(), Box<dyn Error>> {
-        Ok(())
-    }
-}
-
-impl CtrlAnimeDisplay {
-    #[inline]
-    pub fn new() -> Result<CtrlAnimeDisplay, Box<dyn Error>> {
-        // We don't expect this ID to ever change
-        let device = CtrlAnimeDisplay::get_device(0x0b05, 0x193b)?;
-
-        let mut device = device.open()?;
-        device.reset()?;
-
-        device.set_auto_detach_kernel_driver(true).map_err(|err| {
-            error!("Auto-detach kernel driver failed: {}", err);
-            err
-        })?;
-
-        device.claim_interface(0).map_err(|err| {
-            error!("Could not claim device interface: {}", err);
-            err
-        })?;
-
-        info!("Device has an AniMe Matrix display");
-        Ok(CtrlAnimeDisplay {
-            handle: device,
-            initialised: false,
-        })
-    }
-
-    #[inline]
-    fn get_device(vendor: u16, product: u16) -> Result<Device<rusb::GlobalContext>, rusb::Error> {
-        for device in rusb::devices()?.iter() {
-            let device_desc = device.device_descriptor()?;
-            if device_desc.vendor_id() == vendor && device_desc.product_id() == product {
-                return Ok(device);
-            }
-        }
-        Err(rusb::Error::NoDevice)
-    }
-
-    pub async fn do_command(&mut self, command: AnimatrixCommand) -> Result<(), AuraError> {
-        if !self.initialised {
-            self.do_initialization().await?
-        }
-
-        match command {
-            AnimatrixCommand::WriteImage(effect) => self.write_image(effect).await?,
-            AnimatrixCommand::Set => self.do_set().await?,
-            AnimatrixCommand::Apply => self.do_apply().await?,
-            //AnimatrixCommand::ReloadLast => self.reload_last_builtin(&config).await?,
-        }
-        Ok(())
-    }
-
-    /// Should only be used if the bytes you are writing are verified correct
-    #[inline]
-    async fn write_bytes(&self, message: &[u8]) -> Result<(), AuraError> {
-        match self.handle.write_control(
-            0x21,  // request_type
-            0x09,  // request
-            0x35e, // value
-            0x00,  // index
-            message,
-            Duration::from_millis(200),
-        ) {
-            Ok(_) => {}
-            Err(err) => match err {
-                rusb::Error::Timeout => {}
-                _ => error!("Failed to write to led interrupt: {}", err),
-            },
-        }
-        Ok(())
-    }
-
-    /// Write an Animatrix image
-    ///
-    /// The expected input here is *two* Vectors, 640 bytes in length. The two vectors
-    /// are each one half of the full image write.
-    ///
-    /// After each write a flush is written, it is assumed that this tells the device to
-    /// go ahead and display the written bytes
-    ///
-    /// # Note:
-    /// The vectors are expected to contain the full sequence of bytes as follows
-    ///
-    /// - Write pane 1: 0x5e 0xc0 0x02 0x01 0x00 0x73 0x02 .. <led brightness>
-    /// - Write pane 2: 0x5e 0xc0 0x02 0x74 0x02 0x73 0x02 .. <led brightness>
-    ///
-    /// Where led brightness is 0..255, low to high
-    #[inline]
-    async fn write_image(&mut self, image: Vec<Vec<u8>>) -> Result<(), AuraError> {
-        for row in image.iter() {
-            self.write_bytes(row).await?;
-        }
-        self.do_flush().await?;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_initialization(&mut self) -> Result<(), AuraError> {
-        let mut init = [0; PACKET_SIZE];
-        init[0] = DEV_PAGE; // This is the USB page we're using throughout
-        for (idx, byte) in INIT_STR.as_bytes().iter().enumerate() {
-            init[idx + 1] = *byte
-        }
-        self.write_bytes(&init).await?;
-
-        // clear the init array and write other init message
-        for ch in init.iter_mut() {
-            *ch = 0;
-        }
-        init[0] = DEV_PAGE; // write it to be sure?
-        init[1] = INIT;
-
-        self.write_bytes(&init).await?;
-        self.initialised = true;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_flush(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = WRITE;
-        flush[2] = 0x03;
-
-        self.write_bytes(&flush).await?;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_set(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = SET;
-        flush[2] = 0x01;
-        flush[3] = 0x80;
-
-        self.write_bytes(&flush).await?;
-        Ok(())
-    }
-
-    #[inline]
-    async fn do_apply(&mut self) -> Result<(), AuraError> {
-        let mut flush = [0; PACKET_SIZE];
-        flush[0] = DEV_PAGE;
-        flush[1] = APPLY;
-        flush[2] = 0x01;
-        flush[3] = 0x80;
-
-        self.write_bytes(&flush).await?;
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_charge.rs

@@ -1,96 +0,0 @@
-use crate::config::Config;
-use log::{error, info, warn};
-use std::error::Error;
-use std::fs::OpenOptions;
-use std::io::Write;
-use std::path::Path;
-use std::sync::Arc;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-static BAT_CHARGE_PATH: &str = "/sys/class/power_supply/BAT0/charge_control_end_threshold";
-
-pub struct CtrlCharge {
-    path: &'static str,
-}
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlCharge {
-    type A = u8;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        _: Option<Arc<SyncConnection>>,
-        _: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        vec![tokio::spawn(async move {
-            while let Some(n) = recv.recv().await {
-                let mut config = config.lock().await;
-                self.set_charge_limit(n, &mut config)
-                    .unwrap_or_else(|err| warn!("charge_limit: {}", err));
-            }
-        })]
-    }
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        config.read();
-        info!("Reloaded battery charge limit");
-        self.set_charge_limit(config.bat_charge_limit, config)
-    }
-}
-
-impl CtrlCharge {
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let path = CtrlCharge::get_battery_path()?;
-        info!("Device has battery charge threshold control");
-        Ok(CtrlCharge { path })
-    }
-
-    fn get_battery_path() -> Result<&'static str, std::io::Error> {
-        if Path::new(BAT_CHARGE_PATH).exists() {
-            Ok(BAT_CHARGE_PATH)
-        } else {
-            Err(std::io::Error::new(
-                std::io::ErrorKind::NotFound,
-                "Charge control not available",
-            ))
-        }
-    }
-
-    pub(super) fn set_charge_limit(
-        &self,
-        limit: u8,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        if limit < 20 || limit > 100 {
-            warn!(
-                "Unable to set battery charge limit, must be between 20-100: requested {}",
-                limit
-            );
-        }
-
-        let mut file = OpenOptions::new()
-            .write(true)
-            .open(self.path)
-            .map_err(|err| {
-                warn!("Failed to open battery charge limit path: {}", err);
-                err
-            })?;
-        file.write_all(limit.to_string().as_bytes())
-            .unwrap_or_else(|err| error!("Could not write to {}, {}", BAT_CHARGE_PATH, err));
-        info!("Battery charge limit: {}", limit);
-
-        config.read();
-        config.bat_charge_limit = limit;
-        config.write();
-
-        Ok(())
-    }
-}

asus-nb-ctrl/src/ctrl_fan_cpu.rs

@@ -1,339 +0,0 @@
-use crate::config::Config;
-use crate::config::Profile;
-use asus_nb::profile::ProfileEvent;
-use log::{error, info, warn};
-use std::error::Error;
-use std::fs::OpenOptions;
-use std::io::{Read, Write};
-use std::path::Path;
-use std::str::FromStr;
-use std::sync::Arc;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-static FAN_TYPE_1_PATH: &str = "/sys/devices/platform/asus-nb-wmi/throttle_thermal_policy";
-static FAN_TYPE_2_PATH: &str = "/sys/devices/platform/asus-nb-wmi/fan_boost_mode";
-static AMD_BOOST_PATH: &str = "/sys/devices/system/cpu/cpufreq/boost";
-
-pub struct CtrlFanAndCPU {
-    path: &'static str,
-}
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlFanAndCPU {
-    type A = ProfileEvent;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        _: Option<Arc<SyncConnection>>,
-        _: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        let gate1 = Arc::new(Mutex::new(self));
-        let gate2 = gate1.clone();
-        let config1 = config.clone();
-        // spawn an endless loop
-        vec![
-            tokio::spawn(async move {
-                while let Some(event) = recv.recv().await {
-                    let mut config = config1.lock().await;
-                    let mut lock = gate1.lock().await;
-
-                    config.read();
-                    lock.handle_profile_event(&event, &mut config)
-                        .unwrap_or_else(|err| warn!("{}", err));
-                }
-            }),
-            // need to watch file path
-            tokio::spawn(async move {
-                loop {
-                    tokio::time::delay_for(std::time::Duration::from_millis(100)).await;
-                    let mut lock = gate2.lock().await;
-                    let mut config = config.lock().await;
-                    lock.fan_mode_check_change(&mut config)
-                        .unwrap_or_else(|err| warn!("fan_ctrl: {}", err));
-                }
-            }),
-        ]
-    }
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        let mut file = OpenOptions::new().write(true).open(self.path)?;
-        file.write_all(format!("{}\n", config.power_profile).as_bytes())
-            .unwrap_or_else(|err| error!("Could not write to {}, {}", self.path, err));
-        let profile = config.active_profile.clone();
-        self.set_profile(&profile, config)?;
-        info!(
-            "Reloaded fan mode: {:?}",
-            FanLevel::from(config.power_profile)
-        );
-        Ok(())
-    }
-}
-
-impl CtrlFanAndCPU {
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let path = CtrlFanAndCPU::get_fan_path()?;
-        info!("Device has thermal throttle control");
-        Ok(CtrlFanAndCPU { path })
-    }
-
-    fn get_fan_path() -> Result<&'static str, std::io::Error> {
-        if Path::new(FAN_TYPE_1_PATH).exists() {
-            Ok(FAN_TYPE_1_PATH)
-        } else if Path::new(FAN_TYPE_2_PATH).exists() {
-            Ok(FAN_TYPE_2_PATH)
-        } else {
-            Err(std::io::Error::new(
-                std::io::ErrorKind::NotFound,
-                "Fan mode not available, you may require a v5.8 series kernel or newer",
-            ))
-        }
-    }
-
-    pub(super) fn fan_mode_check_change(
-        &mut self,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        let mut file = OpenOptions::new().read(true).open(self.path)?;
-        let mut buf = [0u8; 1];
-        file.read_exact(&mut buf)?;
-        if let Some(num) = char::from(buf[0]).to_digit(10) {
-            if config.power_profile != num as u8 {
-                config.read();
-
-                let mut i = config
-                    .toggle_profiles
-                    .iter()
-                    .position(|x| x == &config.active_profile)
-                    .map(|i| i + 1)
-                    .unwrap_or(0);
-                if i >= config.toggle_profiles.len() {
-                    i = 0;
-                }
-
-                let new_profile = config
-                    .toggle_profiles
-                    .get(i)
-                    .unwrap_or(&config.active_profile)
-                    .clone();
-
-                self.set_profile(&new_profile, config)?;
-
-                info!("Profile was changed: {}", &new_profile);
-            }
-            return Ok(());
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::InvalidData,
-            "Fan-level could not be parsed",
-        );
-        Err(Box::new(err))
-    }
-
-    pub(super) fn set_fan_mode(
-        &mut self,
-        preset: u8,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        let mode = config.active_profile.clone();
-        let mut fan_ctrl = OpenOptions::new().write(true).open(self.path)?;
-        config.read();
-        let mut mode_config = config
-            .power_profiles
-            .get_mut(&mode)
-            .ok_or_else(|| RogError::MissingProfile(mode.clone()))?;
-        config.power_profile = preset;
-        mode_config.fan_preset = preset;
-        config.write();
-        fan_ctrl
-            .write_all(format!("{}\n", preset).as_bytes())
-            .unwrap_or_else(|err| error!("Could not write to {}, {}", self.path, err));
-        info!("Fan mode set to: {:?}", FanLevel::from(preset));
-        self.set_pstate_for_fan_mode(&mode, config)?;
-        self.set_fan_curve_for_fan_mode(&mode, config)?;
-        Ok(())
-    }
-
-    fn handle_profile_event(
-        &mut self,
-        event: &ProfileEvent,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        match event {
-            ProfileEvent::ChangeMode(mode) => {
-                self.set_fan_mode(*mode, config)?;
-            }
-            ProfileEvent::Cli(command) => {
-                let profile_key = match command.profile.as_ref() {
-                    Some(k) => k.clone(),
-                    None => config.active_profile.clone(),
-                };
-
-                let mut profile = if command.create {
-                    config
-                        .power_profiles
-                        .entry(profile_key.clone())
-                        .or_insert_with(Profile::default)
-                } else {
-                    config
-                        .power_profiles
-                        .get_mut(&profile_key)
-                        .ok_or_else(|| RogError::MissingProfile(profile_key.clone()))?
-                };
-
-                if command.turbo.is_some() {
-                    profile.turbo = command.turbo.unwrap();
-                }
-                if let Some(min_perc) = command.min_percentage {
-                    profile.min_percentage = min_perc;
-                }
-                if let Some(max_perc) = command.max_percentage {
-                    profile.max_percentage = max_perc;
-                }
-                if let Some(ref preset) = command.preset {
-                    profile.fan_preset = preset.into();
-                }
-                if let Some(ref curve) = command.curve {
-                    profile.fan_curve = Some(curve.clone());
-                }
-
-                self.set_profile(&profile_key, config)?;
-            }
-        }
-        Ok(())
-    }
-
-    fn set_profile(&mut self, profile: &str, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        let mode_config = config
-            .power_profiles
-            .get(profile)
-            .ok_or_else(|| RogError::MissingProfile(profile.into()))?;
-        let mut fan_ctrl = OpenOptions::new().write(true).open(self.path)?;
-        fan_ctrl
-            .write_all(format!("{}\n", mode_config.fan_preset).as_bytes())
-            .unwrap_or_else(|err| error!("Could not write to {}, {}", self.path, err));
-        config.power_profile = mode_config.fan_preset;
-
-        self.set_pstate_for_fan_mode(profile, config)?;
-        self.set_fan_curve_for_fan_mode(profile, config)?;
-
-        config.active_profile = profile.into();
-
-        config.write();
-        Ok(())
-    }
-
-    fn set_pstate_for_fan_mode(
-        &self,
-        // mode: FanLevel,
-        mode: &str,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        info!("Setting pstate");
-        let mode_config = config
-            .power_profiles
-            .get(mode)
-            .ok_or_else(|| RogError::MissingProfile(mode.into()))?;
-
-        // Set CPU pstate
-        if let Ok(pstate) = intel_pstate::PState::new() {
-            pstate.set_min_perf_pct(mode_config.min_percentage)?;
-            pstate.set_max_perf_pct(mode_config.max_percentage)?;
-            pstate.set_no_turbo(!mode_config.turbo)?;
-            info!(
-                "Intel CPU Power: min: {}%, max: {}%, turbo: {}",
-                mode_config.min_percentage, mode_config.max_percentage, mode_config.turbo
-            );
-        } else {
-            info!("Setting pstate for AMD CPU");
-            // must be AMD CPU
-            let mut file = OpenOptions::new()
-                .write(true)
-                .open(AMD_BOOST_PATH)
-                .map_err(|err| {
-                    warn!("Failed to open AMD boost: {}", err);
-                    err
-                })?;
-
-            let boost = if mode_config.turbo { "1" } else { "0" }; // opposite of Intel
-            file.write_all(boost.as_bytes())
-                .unwrap_or_else(|err| error!("Could not write to {}, {}", AMD_BOOST_PATH, err));
-            info!("AMD CPU Turbo: {}", boost);
-        }
-        Ok(())
-    }
-
-    fn set_fan_curve_for_fan_mode(
-        &self,
-        // mode: FanLevel,
-        mode: &str,
-        config: &Config,
-    ) -> Result<(), Box<dyn Error>> {
-        let mode_config = &config
-            .power_profiles
-            .get(mode)
-            .ok_or_else(|| RogError::MissingProfile(mode.into()))?;
-
-        if let Some(ref curve) = mode_config.fan_curve {
-            use rog_fan_curve::{Board, Fan};
-            if let Some(board) = Board::from_board_name() {
-                curve.apply(board, Fan::Cpu)?;
-                curve.apply(board, Fan::Gpu)?;
-            } else {
-                warn!("Fan curve unsupported on this board.")
-            }
-        }
-
-        Ok(())
-    }
-}
-
-use crate::error::RogError;
-
-#[derive(Debug)]
-pub enum FanLevel {
-    Normal,
-    Boost,
-    Silent,
-}
-
-impl FromStr for FanLevel {
-    type Err = RogError;
-
-    fn from_str(s: &str) -> Result<Self, RogError> {
-        match s.to_lowercase().as_str() {
-            "normal" => Ok(FanLevel::Normal),
-            "boost" => Ok(FanLevel::Boost),
-            "silent" => Ok(FanLevel::Silent),
-            _ => Err(RogError::ParseFanLevel),
-        }
-    }
-}
-
-impl From<u8> for FanLevel {
-    fn from(n: u8) -> Self {
-        match n {
-            0 => FanLevel::Normal,
-            1 => FanLevel::Boost,
-            2 => FanLevel::Silent,
-            _ => FanLevel::Normal,
-        }
-    }
-}
-
-impl From<FanLevel> for u8 {
-    fn from(n: FanLevel) -> Self {
-        match n {
-            FanLevel::Normal => 0,
-            FanLevel::Boost => 1,
-            FanLevel::Silent => 2,
-        }
-    }
-}

asus-nb-ctrl/src/ctrl_leds.rs

@@ -1,370 +0,0 @@
-// Only these two packets must be 17 bytes
-static LED_APPLY: [u8; 17] = [0x5d, 0xb4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-static LED_SET: [u8; 17] = [0x5d, 0xb5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
-
-use crate::{config::Config, error::RogError, laptops::HELP_ADDRESS};
-use asus_nb::{
-    aura_brightness_bytes, aura_modes::AuraModes, fancy::KeyColourArray, DBUS_IFACE, DBUS_PATH,
-    LED_MSG_LEN,
-};
-use dbus::{channel::Sender, nonblock::SyncConnection, tree::Signal};
-use log::{info, warn};
-use std::error::Error;
-use std::fs::OpenOptions;
-use std::io::{Read, Write};
-use std::sync::Arc;
-use tokio::sync::mpsc::Receiver;
-use tokio::sync::Mutex;
-use tokio::task::JoinHandle;
-
-pub struct CtrlKbdBacklight {
-    led_node: Option<String>,
-    #[allow(dead_code)]
-    kbd_node: Option<String>,
-    bright_node: String,
-    supported_modes: Vec<u8>,
-    flip_effect_write: bool,
-}
-
-use async_trait::async_trait;
-
-#[async_trait]
-impl crate::Controller for CtrlKbdBacklight {
-    type A = AuraModes;
-
-    /// Spawns two tasks which continuously check for changes
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        mut recv: Receiver<Self::A>,
-        connection: Option<Arc<SyncConnection>>,
-        signal: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>> {
-        let gate1 = Arc::new(Mutex::new(self));
-        let gate2 = gate1.clone();
-
-        let config1 = config.clone();
-        vec![
-            tokio::spawn(async move {
-                while let Some(command) = recv.recv().await {
-                    let mut config = config1.lock().await;
-                    let mut lock = gate1.lock().await;
-                    match &command {
-                        AuraModes::PerKey(_) => {
-                            lock.do_command(command, &mut config)
-                                .await
-                                .unwrap_or_else(|err| warn!("{}", err));
-                        }
-                        _ => {
-                            let json = serde_json::to_string(&command).unwrap();
-                            lock.do_command(command, &mut config)
-                                .await
-                                .unwrap_or_else(|err| warn!("{}", err));
-                            connection
-                                .as_ref()
-                                .expect("LED Controller must have DBUS connection")
-                                .send(
-                                    signal
-                                        .as_ref()
-                                        .expect("LED Controller must have DBUS signal")
-                                        .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                                        .append1(json),
-                                )
-                                .unwrap_or_else(|_| 0);
-                        }
-                    }
-                }
-            }),
-            tokio::spawn(async move {
-                loop {
-                    tokio::time::delay_for(std::time::Duration::from_millis(100)).await;
-                    let mut lock = gate2.lock().await;
-                    let mut config = config.lock().await;
-                    lock.let_bright_check_change(&mut config)
-                        .unwrap_or_else(|err| warn!("led_ctrl: {}", err));
-                }
-            }),
-        ]
-    }
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        // set current mode (if any)
-        if self.supported_modes.len() > 1 {
-            if self.supported_modes.contains(&config.kbd_backlight_mode) {
-                let mode = config
-                    .get_led_mode_data(config.kbd_backlight_mode)
-                    .ok_or(RogError::NotSupported)?
-                    .to_owned();
-                self.write_mode(&mode).await?;
-                info!("Reloaded last used mode");
-            } else {
-                warn!(
-                    "An unsupported mode was set: {}, reset to first mode available",
-                    <&str>::from(&<AuraModes>::from(config.kbd_backlight_mode))
-                );
-                for (idx, mode) in config.kbd_backlight_modes.iter_mut().enumerate() {
-                    if !self.supported_modes.contains(&mode.into()) {
-                        config.kbd_backlight_modes.remove(idx);
-                        config.write();
-                        break;
-                    }
-                }
-                config.kbd_backlight_mode = self.supported_modes[0];
-                // TODO: do a recursive call with a boxed dyn future later
-                let mode = config
-                    .get_led_mode_data(config.kbd_backlight_mode)
-                    .ok_or(RogError::NotSupported)?
-                    .to_owned();
-                self.write_mode(&mode).await?;
-                info!("Reloaded last used mode");
-            }
-        }
-
-        // Reload brightness
-        let bright = config.kbd_led_brightness;
-        let bytes = aura_brightness_bytes(bright);
-        self.write_bytes(&bytes).await?;
-        info!("Reloaded last used brightness");
-        Ok(())
-    }
-}
-
-impl CtrlKbdBacklight {
-    #[inline]
-    pub fn new(id_product: &str, condev_iface: Option<&String>, supported_modes: Vec<u8>) -> Self {
-        // TODO: return error if *all* nodes are None
-        CtrlKbdBacklight {
-            led_node: Self::get_node_failover(id_product, None, Self::scan_led_node).ok(),
-            kbd_node: Self::get_node_failover(id_product, condev_iface, Self::scan_kbd_node).ok(),
-            // TODO: Check for existance
-            bright_node: "/sys/class/leds/asus::kbd_backlight/brightness".to_string(),
-            supported_modes,
-            flip_effect_write: false,
-        }
-    }
-
-    fn get_node_failover(
-        id_product: &str,
-        iface: Option<&String>,
-        fun: fn(&str, Option<&String>) -> Result<String, std::io::Error>,
-    ) -> Result<String, std::io::Error> {
-        for n in 0..=2 {
-            // 0,1,2 inclusive
-            match fun(id_product, iface) {
-                Ok(o) => return Ok(o),
-                Err(e) => {
-                    if n == 2 {
-                        warn!("Looking for node: {}", e.to_string());
-                        std::thread::sleep(std::time::Duration::from_secs(1));
-                    } else {
-                        return Err(e);
-                    }
-                }
-            }
-        }
-        // Shouldn't be possible to reach this...
-        let err = std::io::Error::new(std::io::ErrorKind::NotFound, "node not found");
-        Err(err)
-    }
-
-    fn scan_led_node(id_product: &str, _: Option<&String>) -> Result<String, std::io::Error> {
-        let mut enumerator = udev::Enumerator::new().map_err(|err| {
-            warn!("{}", err);
-            err
-        })?;
-        enumerator.match_subsystem("hidraw").map_err(|err| {
-            warn!("{}", err);
-            err
-        })?;
-
-        for device in enumerator.scan_devices()? {
-            if let Some(parent) = device
-                .parent_with_subsystem_devtype("usb", "usb_device")
-                .map_err(|err| {
-                    warn!("{}", err);
-                    err
-                })?
-            {
-                if parent.attribute_value("idProduct").unwrap() == id_product {
-                    // && device.parent().unwrap().sysnum().unwrap() == 3
-                    if let Some(dev_node) = device.devnode() {
-                        info!("Using device at: {:?} for LED control", dev_node);
-                        return Ok(dev_node.to_string_lossy().to_string());
-                    }
-                }
-            }
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::NotFound,
-            "ASUS LED device node not found",
-        );
-        warn!("Did not find a hidraw node for LED control, your device may be unsupported or require a kernel patch, see: {}", HELP_ADDRESS);
-        Err(err)
-    }
-
-    fn scan_kbd_node(id_product: &str, iface: Option<&String>) -> Result<String, std::io::Error> {
-        let mut enumerator = udev::Enumerator::new()?;
-        enumerator.match_subsystem("input").map_err(|err| {
-            warn!("{}", err);
-            err
-        })?;
-        enumerator
-            .match_property("ID_MODEL_ID", id_product)
-            .map_err(|err| {
-                warn!("{}", err);
-                err
-            })?;
-
-        for device in enumerator.scan_devices().map_err(|err| {
-            warn!("{}", err);
-            err
-        })? {
-            if let Some(dev_node) = device.devnode() {
-                if let Some(inum) = device.property_value("ID_USB_INTERFACE_NUM") {
-                    if let Some(iface) = iface {
-                        if inum == iface.as_str() {
-                            info!("Using device at: {:?} for keyboard polling", dev_node);
-                            return Ok(dev_node.to_string_lossy().to_string());
-                        }
-                    }
-                }
-            }
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::NotFound,
-            "ASUS keyboard 'Consumer Device' node not found",
-        );
-        warn!("Did not find keyboard consumer device node, if expected functions are missing please file an issue at {}", HELP_ADDRESS);
-        Err(err)
-    }
-
-    fn let_bright_check_change(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>> {
-        let mut file = OpenOptions::new().read(true).open(&self.bright_node)?;
-        let mut buf = [0u8; 1];
-        file.read_exact(&mut buf)?;
-        if let Some(num) = char::from(buf[0]).to_digit(10) {
-            if config.kbd_led_brightness != num as u8 {
-                config.read();
-                config.kbd_led_brightness = num as u8;
-                config.write();
-            }
-            return Ok(());
-        }
-        let err = std::io::Error::new(
-            std::io::ErrorKind::InvalidData,
-            "LED brightness could not be parsed",
-        );
-        Err(Box::new(err))
-    }
-
-    pub async fn do_command(
-        &mut self,
-        mode: AuraModes,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        self.set_and_save(mode, config).await
-    }
-
-    /// Should only be used if the bytes you are writing are verified correct
-    #[inline]
-    async fn write_bytes(&self, message: &[u8]) -> Result<(), Box<dyn Error>> {
-        if let Some(led_node) = &self.led_node {
-            if let Ok(mut file) = OpenOptions::new().write(true).open(led_node) {
-                file.write_all(message).unwrap();
-                return Ok(());
-            }
-        }
-        Err(Box::new(RogError::NotSupported))
-    }
-
-    /// Write an effect block
-    #[inline]
-    async fn write_effect(&mut self, effect: &[Vec<u8>]) -> Result<(), Box<dyn Error>> {
-        if self.flip_effect_write {
-            for row in effect.iter().rev() {
-                self.write_bytes(row).await?;
-            }
-        } else {
-            for row in effect.iter() {
-                self.write_bytes(row).await?;
-            }
-        }
-        self.flip_effect_write = !self.flip_effect_write;
-        Ok(())
-    }
-
-    /// Used to set a builtin mode and save the settings for it
-    ///
-    /// This needs to be universal so that settings applied by dbus stick
-    #[inline]
-    async fn set_and_save(
-        &mut self,
-        mode: AuraModes,
-        config: &mut Config,
-    ) -> Result<(), Box<dyn Error>> {
-        match mode {
-            AuraModes::LedBrightness(n) => {
-                let bytes: [u8; LED_MSG_LEN] = (&mode).into();
-                self.write_bytes(&bytes).await?;
-                config.read();
-                config.kbd_led_brightness = n;
-                config.write();
-                info!("LED brightness set to {:#?}", n);
-            }
-            AuraModes::PerKey(v) => {
-                if v.is_empty() || v[0].is_empty() {
-                    let bytes = KeyColourArray::get_init_msg();
-                    self.write_bytes(&bytes).await?;
-                } else {
-                    self.write_effect(&v).await?;
-                }
-            }
-            _ => {
-                config.read();
-                let mode_num: u8 = u8::from(&mode);
-                self.write_mode(&mode).await?;
-                config.kbd_backlight_mode = mode_num;
-                config.set_mode_data(mode);
-                config.write();
-            }
-        }
-        Ok(())
-    }
-
-    #[inline]
-    async fn write_mode(&mut self, mode: &AuraModes) -> Result<(), Box<dyn Error>> {
-        match mode {
-            AuraModes::PerKey(v) => {
-                if v.is_empty() || v[0].is_empty() {
-                    let bytes = KeyColourArray::get_init_msg();
-                    self.write_bytes(&bytes).await?;
-                } else {
-                    self.write_effect(v).await?;
-                }
-            }
-            _ => {
-                let mode_num: u8 = u8::from(mode);
-                match mode {
-                    AuraModes::MultiStatic(_) => {
-                        if self.supported_modes.contains(&mode_num) {
-                            let bytes: [[u8; LED_MSG_LEN]; 4] = mode.into();
-                            for array in bytes.iter() {
-                                self.write_bytes(array).await?;
-                            }
-                        }
-                    }
-                    _ => {
-                        if self.supported_modes.contains(&mode_num) {
-                            let bytes: [u8; LED_MSG_LEN] = mode.into();
-                            self.write_bytes(&bytes).await?;
-                        }
-                    }
-                }
-                self.write_bytes(&LED_SET).await?;
-                // Changes won't persist unless apply is set
-                self.write_bytes(&LED_APPLY).await?;
-            }
-        }
-        Ok(())
-    }
-}

asus-nb-ctrl/src/daemon.rs

@@ -1,251 +0,0 @@
-use daemon::{
-    config::Config, ctrl_anime::CtrlAnimeDisplay, ctrl_charge::CtrlCharge,
-    ctrl_fan_cpu::CtrlFanAndCPU, ctrl_leds::CtrlKbdBacklight, dbus::dbus_create_tree,
-    laptops::match_laptop,
-};
-
-use dbus::{
-    channel::Sender,
-    nonblock::{Process, SyncConnection},
-    tree::Signal,
-};
-use dbus_tokio::connection;
-
-use asus_nb::{DBUS_IFACE, DBUS_NAME, DBUS_PATH};
-use daemon::Controller;
-use log::LevelFilter;
-use log::{error, info, warn};
-use std::error::Error;
-use std::io::Write;
-use std::sync::Arc;
-use tokio::sync::Mutex;
-
-#[tokio::main]
-pub async fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut logger = env_logger::Builder::new();
-    logger
-        .target(env_logger::Target::Stdout)
-        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
-        .init();
-
-    info!("Version: {}", daemon::VERSION);
-    start_daemon().await?;
-    Ok(())
-}
-
-// Timing is such that:
-// - interrupt write is minimum 1ms (sometimes lower)
-// - read interrupt must timeout, minimum of 1ms
-// - for a single usb packet, 2ms total.
-// - to maintain constant times of 1ms, per-key colours should use
-//   the effect endpoint so that the complete colour block is written
-//   as fast as 1ms per row of the matrix inside it. (10ms total time)
-//
-// DBUS processing takes 6ms if not tokiod
-pub async fn start_daemon() -> Result<(), Box<dyn Error>> {
-    let laptop = match_laptop();
-    let mut config = if let Some(laptop) = laptop.as_ref() {
-        Config::default().load(laptop.supported_modes())
-    } else {
-        Config::default().load(&[])
-    };
-
-    let mut led_control = if let Some(laptop) = laptop {
-        Some(CtrlKbdBacklight::new(
-            laptop.usb_product(),
-            laptop.condev_iface(),
-            laptop.supported_modes().to_owned(),
-        ))
-    } else {
-        None
-    };
-
-    let mut charge_control = CtrlCharge::new().map_or_else(
-        |err| {
-            error!("{}", err);
-            None
-        },
-        Some,
-    );
-
-    let mut fan_control = CtrlFanAndCPU::new().map_or_else(
-        |err| {
-            error!("{}", err);
-            None
-        },
-        Some,
-    );
-
-    // Reload settings
-    if let Some(ctrl) = fan_control.as_mut() {
-        ctrl.reload_from_config(&mut config)
-            .await
-            .unwrap_or_else(|err| warn!("Fan mode: {}", err));
-    }
-
-    if let Some(ctrl) = charge_control.as_mut() {
-        ctrl.reload_from_config(&mut config)
-            .await
-            .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
-    }
-
-    if let Some(ctrl) = led_control.as_mut() {
-        ctrl.reload_from_config(&mut config)
-            .await
-            .unwrap_or_else(|err| warn!("Reload settings: {}", err));
-    }
-
-    let (resource, connection) = connection::new_system_sync()?;
-    tokio::spawn(async {
-        let err = resource.await;
-        panic!("Lost connection to D-Bus: {}", err);
-    });
-
-    connection
-        .request_name(DBUS_NAME, false, true, true)
-        .await?;
-
-    let config = Arc::new(Mutex::new(config));
-    let (
-        tree,
-        aura_command_recv,
-        animatrix_recv,
-        _fan_mode_recv,
-        charge_limit_recv,
-        profile_recv,
-        led_changed_signal,
-        fanmode_signal,
-        charge_limit_signal,
-    ) = dbus_create_tree(config.clone());
-
-    // We add the tree to the connection so that incoming method calls will be handled.
-    tree.start_receive_send(&*connection);
-
-    // Send boot signals
-    send_boot_signals(
-        connection.clone(),
-        config.clone(),
-        fanmode_signal.clone(),
-        charge_limit_signal.clone(),
-        led_changed_signal.clone(),
-    )
-    .await?;
-
-    // For helping with processing signals
-    start_signal_task(
-        connection.clone(),
-        config.clone(),
-        fanmode_signal,
-        charge_limit_signal,
-    );
-
-    // Begin all tasks
-    let mut handles = Vec::new();
-    if let Ok(ctrl) = CtrlAnimeDisplay::new() {
-        handles.append(&mut ctrl.spawn_task_loop(config.clone(), animatrix_recv, None, None));
-    }
-
-    if let Some(ctrl) = fan_control.take() {
-        handles.append(&mut ctrl.spawn_task_loop(config.clone(), profile_recv, None, None));
-    }
-
-    if let Some(ctrl) = charge_control.take() {
-        handles.append(&mut ctrl.spawn_task_loop(config.clone(), charge_limit_recv, None, None));
-    }
-
-    if let Some(ctrl) = led_control.take() {
-        handles.append(&mut ctrl.spawn_task_loop(
-            config.clone(),
-            aura_command_recv,
-            Some(connection.clone()),
-            Some(led_changed_signal),
-        ));
-    }
-
-    connection.process_all();
-    for handle in handles {
-        handle.await?;
-    }
-
-    Ok(())
-}
-
-// TODO: Move these in to the controllers tasks
-fn start_signal_task(
-    connection: Arc<SyncConnection>,
-    config: Arc<Mutex<Config>>,
-    fanmode_signal: Arc<Signal<()>>,
-    charge_limit_signal: Arc<Signal<()>>,
-) {
-    tokio::spawn(async move {
-        // Some small things we need to track, without passing all sorts of stuff around
-        let mut last_fan_mode = config.lock().await.power_profile;
-        let mut last_charge_limit = config.lock().await.bat_charge_limit;
-        loop {
-            // Use tokio sleep to not hold up other threads
-            tokio::time::delay_for(std::time::Duration::from_millis(500)).await;
-
-            let config = config.lock().await;
-            if config.power_profile != last_fan_mode {
-                last_fan_mode = config.power_profile;
-                connection
-                    .send(
-                        fanmode_signal
-                            .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                            .append1(last_fan_mode),
-                    )
-                    .unwrap_or_else(|_| 0);
-            }
-
-            if config.bat_charge_limit != last_charge_limit {
-                last_charge_limit = config.bat_charge_limit;
-                connection
-                    .send(
-                        charge_limit_signal
-                            .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                            .append1(last_charge_limit),
-                    )
-                    .unwrap_or_else(|_| 0);
-            }
-        }
-    });
-}
-
-async fn send_boot_signals(
-    connection: Arc<SyncConnection>,
-    config: Arc<Mutex<Config>>,
-    fanmode_signal: Arc<Signal<()>>,
-    charge_limit_signal: Arc<Signal<()>>,
-    led_changed_signal: Arc<Signal<()>>,
-) -> Result<(), Box<dyn Error>> {
-    let config = config.lock().await;
-
-    if let Some(data) = config.get_led_mode_data(config.kbd_backlight_mode) {
-        connection
-            .send(
-                led_changed_signal
-                    .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                    .append1(serde_json::to_string(data)?),
-            )
-            .unwrap_or_else(|_| 0);
-    }
-
-    connection
-        .send(
-            fanmode_signal
-                .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                .append1(config.power_profile),
-        )
-        .unwrap_or_else(|_| 0);
-
-    connection
-        .send(
-            charge_limit_signal
-                .msg(&DBUS_PATH.into(), &DBUS_IFACE.into())
-                .append1(config.bat_charge_limit),
-        )
-        .unwrap_or_else(|_| 0);
-
-    Ok(())
-}

asus-nb-ctrl/src/dbus.rs

@@ -1,259 +0,0 @@
-use crate::config::Config;
-use asus_nb::profile::ProfileEvent;
-use asus_nb::{aura_modes::AuraModes, DBUS_IFACE, DBUS_PATH};
-use dbus::tree::{Factory, MTSync, Method, MethodErr, Signal, Tree};
-use log::warn;
-use std::sync::Arc;
-use tokio::sync::{
-    mpsc::{channel, Receiver, Sender},
-    Mutex,
-};
-
-fn set_keyboard_backlight(sender: Mutex<Sender<AuraModes>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("SetKeyBacklight", (), {
-            move |m| {
-                let json: &str = m.msg.read1()?;
-                if let Ok(mut lock) = sender.try_lock() {
-                    if let Ok(data) = serde_json::from_str(json) {
-                        lock.try_send(data).unwrap_or_else(|err| {
-                            warn!("SetKeyBacklight over mpsc failed: {}", err)
-                        });
-                    } else {
-                        warn!("SetKeyBacklight could not deserialise");
-                    }
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<&str, _>("json")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-fn get_keyboard_backlight(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetKeyBacklight", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    for mode in &lock.kbd_backlight_modes {
-                        if lock.kbd_backlight_mode == <u8>::from(mode) {
-                            let mode = serde_json::to_string(&mode).unwrap();
-                            let mret = m.msg.method_return().append1(mode);
-                            return Ok(vec![mret]);
-                        }
-                    }
-                    Err(MethodErr::failed(
-                        "Keyboard LED mode set to an invalid mode",
-                    ))
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<&str, _>("json")
-}
-
-fn get_keyboard_backlight_modes(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetKeyBacklightModes", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    let mode = serde_json::to_string(&lock.kbd_backlight_modes).unwrap();
-                    let mret = m.msg.method_return().append1(mode);
-                    Ok(vec![mret])
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<&str, _>("json")
-}
-
-fn set_animatrix(
-    sender: Mutex<Sender<Vec<Vec<u8>>>>, // need mutex only to get interior mutability in MTSync
-) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("AnimatrixWrite", (), {
-            move |m| {
-                let mut iter = m.msg.iter_init();
-                let byte_array: Vec<Vec<u8>> = vec![iter.read()?, iter.read()?];
-                if let Ok(mut lock) = sender.try_lock() {
-                    // Ignore errors if the channel is already full
-                    lock.try_send(byte_array).unwrap_or_else(|_err| {});
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<Vec<u8>, _>("bytearray1")
-        .inarg::<Vec<u8>, _>("bytearray2")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-fn set_fan_mode(sender: Mutex<Sender<u8>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("SetFanMode", (), {
-            move |m| {
-                if let Ok(mut lock) = sender.try_lock() {
-                    let mut iter = m.msg.iter_init();
-                    let byte: u8 = iter.read()?;
-                    lock.try_send(byte).unwrap_or_else(|_err| {});
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<u8, _>("mode")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-fn get_fan_mode(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetFanMode", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    let mret = m.msg.method_return().append1(lock.power_profile);
-                    Ok(vec![mret])
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<u8, _>("mode")
-}
-
-fn get_charge_limit(config: Arc<Mutex<Config>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        .method("GetChargeLimit", (), {
-            move |m| {
-                if let Ok(lock) = config.try_lock() {
-                    let mret = m.msg.method_return().append1(lock.bat_charge_limit);
-                    Ok(vec![mret])
-                } else {
-                    Err(MethodErr::failed("Could not lock config for access"))
-                }
-            }
-        })
-        .outarg::<u8, _>("limit")
-}
-
-fn set_charge_limit(sender: Mutex<Sender<u8>>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for ledmessage
-        .method("SetChargeLimit", (), {
-            move |m| {
-                if let Ok(mut lock) = sender.try_lock() {
-                    let mut iter = m.msg.iter_init();
-                    let byte: u8 = iter.read()?;
-                    lock.try_send(byte).unwrap_or_else(|_err| {});
-                    Ok(vec![])
-                } else {
-                    Err(MethodErr::failed("Could not lock daemon for access"))
-                }
-            }
-        })
-        .inarg::<u8, _>("limit")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-fn set_profile(sender: Sender<ProfileEvent>) -> Method<MTSync, ()> {
-    let factory = Factory::new_sync::<()>();
-    factory
-        // method for profile
-        .method("ProfileCommand", (), {
-            move |m| {
-                let mut iter = m.msg.iter_init();
-                let byte: String = iter.read()?;
-                if let Ok(byte) = serde_json::from_str(&byte) {
-                    sender.clone().try_send(byte).unwrap_or_else(|_err| {});
-                }
-
-                Ok(vec![])
-            }
-        })
-        .inarg::<String, _>("limit")
-        .annotate("org.freedesktop.DBus.Method.NoReply", "true")
-}
-
-#[allow(clippy::type_complexity)]
-pub fn dbus_create_tree(
-    config: Arc<Mutex<Config>>,
-) -> (
-    Tree<MTSync, ()>,
-    Receiver<AuraModes>,
-    Receiver<Vec<Vec<u8>>>,
-    Receiver<u8>,
-    Receiver<u8>,
-    Receiver<ProfileEvent>,
-    Arc<Signal<()>>,
-    Arc<Signal<()>>,
-    Arc<Signal<()>>,
-) {
-    let (aura_command_send, aura_command_recv) = channel::<AuraModes>(1);
-    let (animatrix_send, animatrix_recv) = channel::<Vec<Vec<u8>>>(1);
-    let (fan_mode_send, fan_mode_recv) = channel::<u8>(1);
-    let (profile_send, profile_recv) = channel::<ProfileEvent>(1);
-    let (charge_send, charge_recv) = channel::<u8>(1);
-
-    let factory = Factory::new_sync::<()>();
-
-    let key_backlight_changed = Arc::new(
-        factory
-            .signal("KeyBacklightChanged", ())
-            .sarg::<&str, _>("json"),
-    );
-    let chrg_limit_changed = Arc::new(
-        factory
-            .signal("ChargeLimitChanged", ())
-            .sarg::<u8, _>("limit"),
-    );
-    let fanmode_changed = Arc::new(factory.signal("FanModeChanged", ()).sarg::<u8, _>("mode"));
-
-    let tree = factory
-        .tree(())
-        .add(
-            factory.object_path(DBUS_PATH, ()).introspectable().add(
-                factory
-                    .interface(DBUS_IFACE, ())
-                    .add_m(set_keyboard_backlight(Mutex::new(aura_command_send)))
-                    .add_m(set_animatrix(Mutex::new(animatrix_send)))
-                    .add_m(set_fan_mode(Mutex::new(fan_mode_send)))
-                    .add_m(set_profile(profile_send))
-                    .add_m(set_charge_limit(Mutex::new(charge_send)))
-                    .add_m(get_fan_mode(config.clone()))
-                    .add_m(get_charge_limit(config.clone()))
-                    .add_m(get_keyboard_backlight(config.clone()))
-                    .add_m(get_keyboard_backlight_modes(config))
-                    .add_s(key_backlight_changed.clone())
-                    .add_s(fanmode_changed.clone())
-                    .add_s(chrg_limit_changed.clone()),
-            ),
-        )
-        .add(factory.object_path("/", ()).introspectable());
-    (
-        tree,
-        aura_command_recv,
-        animatrix_recv,
-        fan_mode_recv,
-        charge_recv,
-        profile_recv,
-        key_backlight_changed,
-        fanmode_changed,
-        chrg_limit_changed,
-    )
-}

asus-nb-ctrl/src/error.rs

@@ -1,21 +0,0 @@
-use std::fmt;
-
-#[derive(Debug)]
-pub enum RogError {
-    ParseFanLevel,
-    MissingProfile(String),
-    NotSupported,
-}
-
-impl std::error::Error for RogError {}
-
-impl fmt::Display for RogError {
-    // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        match self {
-            RogError::ParseFanLevel => write!(f, "Parse error"),
-            RogError::MissingProfile(profile) => write!(f, "Profile does not exist {}", profile),
-            RogError::NotSupported => write!(f, "Not supported"),
-        }
-    }
-}

asus-nb-ctrl/src/lib.rs

@@ -1,45 +0,0 @@
-#![deny(unused_must_use)]
-/// Configuration loading, saving
-pub mod config;
-///
-pub mod ctrl_anime;
-///
-pub mod ctrl_charge;
-///
-pub mod ctrl_fan_cpu;
-///
-pub mod ctrl_leds;
-///
-pub mod dbus;
-/// Laptop matching to determine capabilities
-pub mod laptops;
-
-mod error;
-
-use async_trait::async_trait;
-use config::Config;
-use std::error::Error;
-use std::sync::Arc;
-use tokio::sync::{mpsc::Receiver, Mutex};
-use tokio::task::JoinHandle;
-
-pub static VERSION: &str = "1.1.2";
-
-use ::dbus::{nonblock::SyncConnection, tree::Signal};
-
-#[async_trait]
-pub trait Controller {
-    type A;
-
-    async fn reload_from_config(&mut self, config: &mut Config) -> Result<(), Box<dyn Error>>;
-
-    /// Spawn an infinitely running task (usually) which checks a Receiver for input,
-    /// and may send a signal over dbus
-    fn spawn_task_loop(
-        self,
-        config: Arc<Mutex<Config>>,
-        recv: Receiver<Self::A>,
-        connection: Option<Arc<SyncConnection>>,
-        signal: Option<Arc<Signal<()>>>,
-    ) -> Vec<JoinHandle<()>>;
-}

asus-nb-ctrl/src/main.rs

@@ -1,82 +0,0 @@
-use asus_nb::{
-    cli_options::{LedBrightness, SetAuraBuiltin},
-    core_dbus::AuraDbusClient,
-    profile::{ProfileCommand, ProfileEvent},
-};
-use daemon::ctrl_fan_cpu::FanLevel;
-use gumdrop::Options;
-use log::LevelFilter;
-use std::io::Write;
-
-#[derive(Options)]
-struct CLIStart {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(help = "show program version number")]
-    version: bool,
-    #[options(meta = "VAL", help = "<off, low, med, high>")]
-    kbd_bright: Option<LedBrightness>,
-    #[options(meta = "PWR", help = "<silent, normal, boost>")]
-    pwr_profile: Option<FanLevel>,
-    #[options(meta = "CHRG", help = "<20-100>")]
-    chg_limit: Option<u8>,
-    #[options(command)]
-    command: Option<Command>,
-}
-
-#[derive(Options)]
-enum Command {
-    #[options(help = "Set the keyboard lighting from built-in modes")]
-    LedMode(LedModeCommand),
-    #[options(help = "Create and configure profiles")]
-    Profile(ProfileCommand),
-}
-
-#[derive(Options)]
-struct LedModeCommand {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(command, required)]
-    command: Option<SetAuraBuiltin>,
-}
-
-#[tokio::main]
-pub async fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut logger = env_logger::Builder::new();
-    logger
-        .target(env_logger::Target::Stdout)
-        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
-        .init();
-
-    let parsed = CLIStart::parse_args_default_or_exit();
-
-    if parsed.version {
-        println!("Version: {}", daemon::VERSION);
-    }
-
-    let writer = AuraDbusClient::new()?;
-
-    match parsed.command {
-        Some(Command::LedMode(mode)) => {
-            if let Some(command) = mode.command {
-                writer.write_builtin_mode(&command.into())?
-            }
-        }
-        Some(Command::Profile(command)) => {
-            writer.write_profile_command(&ProfileEvent::Cli(command))?
-        }
-        None => (),
-    }
-
-    if let Some(brightness) = parsed.kbd_bright {
-        writer.write_brightness(brightness.level())?;
-    }
-    if let Some(fan_level) = parsed.pwr_profile {
-        writer.write_fan_mode(fan_level.into())?;
-    }
-    if let Some(chg_limit) = parsed.chg_limit {
-        writer.write_charge_limit(chg_limit)?;
-    }
-    Ok(())
-}

asus-nb/src/anime_dbus.rs

@@ -1,78 +0,0 @@
-use crate::anime_matrix::AniMePacketType;
-use crate::{DBUS_IFACE, DBUS_NAME, DBUS_PATH};
-use dbus::channel::Sender;
-use dbus::{blocking::Connection, Message};
-use std::error::Error;
-use std::sync::{
-    atomic::{AtomicBool, Ordering},
-    Arc,
-};
-use std::{thread, time::Duration};
-
-pub const ANIME_PANE1_PREFIX: [u8; 7] = [0x5e, 0xc0, 0x02, 0x01, 0x00, 0x73, 0x02];
-pub const ANIME_PANE2_PREFIX: [u8; 7] = [0x5e, 0xc0, 0x02, 0x74, 0x02, 0x73, 0x02];
-
-/// Interface for the AniMe dot-matrix display
-///
-/// The resolution is 34x56 (1904) but only 1,215 LEDs in the top-left are used.
-/// The display is available only on select GA401 models.
-///
-/// Actual image ration when displayed is stretched width.
-///
-/// Data structure should be nested array of [[u8; 33]; 56]
-pub struct AniMeDbusWriter {
-    connection: Box<Connection>,
-    block_time: u64,
-    stop: Arc<AtomicBool>,
-}
-
-impl AniMeDbusWriter {
-    #[inline]
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let connection = Connection::new_system()?;
-        Ok(AniMeDbusWriter {
-            connection: Box::new(connection),
-            block_time: 25,
-            stop: Arc::new(AtomicBool::new(false)),
-        })
-    }
-
-    pub fn write_image_to_buf(_buf: &mut AniMePacketType, _image_data: &[u8]) {
-        unimplemented!("Image format is in progress of being worked out")
-    }
-
-    /// Write an Animatrix image
-    ///
-    /// The expected input here is *two* Vectors, 640 bytes in length. The two vectors
-    /// are each one half of the full image write.
-    ///
-    /// After each write a flush is written, it is assumed that this tells the device to
-    /// go ahead and display the written bytes
-    ///
-    /// # Note:
-    /// The vectors are expected to contain the full sequence of bytes as follows
-    ///
-    /// - Write packet 1: 0x5e 0xc0 0x02 0x01 0x00 0x73 0x02 .. <led brightness>
-    /// - Write packet 2: 0x5e 0xc0 0x02 0x74 0x02 0x73 0x02 .. <led brightness>
-    ///
-    /// Where led brightness is 0..255, low to high
-    #[inline]
-    pub fn write_image(&mut self, image: &mut AniMePacketType) -> Result<(), Box<dyn Error>> {
-        if image[0][0] != ANIME_PANE1_PREFIX[0] && image[0][6] != ANIME_PANE1_PREFIX[6] {
-            image[0][..7].copy_from_slice(&ANIME_PANE1_PREFIX);
-        }
-        if image[1][0] != ANIME_PANE2_PREFIX[0] && image[1][6] != ANIME_PANE2_PREFIX[6] {
-            image[1][..7].copy_from_slice(&ANIME_PANE2_PREFIX);
-        }
-
-        let mut msg = Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "AnimatrixWrite")?
-            .append2(image[0].to_vec(), image[1].to_vec());
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        thread::sleep(Duration::from_millis(self.block_time));
-        if self.stop.load(Ordering::Relaxed) {
-            panic!("Got signal to stop!");
-        }
-        Ok(())
-    }
-}

asus-nb/src/cli_options.rs

@@ -1,215 +0,0 @@
-use crate::error::AuraError;
-use gumdrop::Options;
-use serde_derive::{Deserialize, Serialize};
-use std::str::FromStr;
-
-#[derive(Options)]
-pub struct LedBrightness {
-    level: u8,
-}
-impl LedBrightness {
-    pub fn level(&self) -> u8 {
-        self.level
-    }
-}
-impl FromStr for LedBrightness {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "off" => Ok(LedBrightness { level: 0x00 }),
-            "low" => Ok(LedBrightness { level: 0x01 }),
-            "med" => Ok(LedBrightness { level: 0x02 }),
-            "high" => Ok(LedBrightness { level: 0x03 }),
-            _ => {
-                println!("Missing required argument, must be one of:\noff,low,med,high\n");
-                Err(AuraError::ParseBrightness)
-            }
-        }
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub struct Colour(pub u8, pub u8, pub u8);
-impl Default for Colour {
-    fn default() -> Self {
-        Colour(255, 0, 0)
-    }
-}
-impl FromStr for Colour {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        if s.len() < 6 {
-            return Err(AuraError::ParseColour);
-        }
-        let r = u8::from_str_radix(&s[0..2], 16).or(Err(AuraError::ParseColour))?;
-        let g = u8::from_str_radix(&s[2..4], 16).or(Err(AuraError::ParseColour))?;
-        let b = u8::from_str_radix(&s[4..6], 16).or(Err(AuraError::ParseColour))?;
-        Ok(Colour(r, g, b))
-    }
-}
-
-#[derive(Deserialize, Serialize)]
-pub enum Speed {
-    Low = 0xe1,
-    Med = 0xeb,
-    High = 0xf5,
-}
-impl Default for Speed {
-    fn default() -> Self {
-        Speed::Med
-    }
-}
-impl FromStr for Speed {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "low" => Ok(Speed::Low),
-            "med" => Ok(Speed::Med),
-            "high" => Ok(Speed::High),
-            _ => Err(AuraError::ParseSpeed),
-        }
-    }
-}
-
-/// Used for Rainbow mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Deserialize, Serialize)]
-pub enum Direction {
-    Right,
-    Left,
-    Up,
-    Down,
-}
-impl Default for Direction {
-    fn default() -> Self {
-        Direction::Right
-    }
-}
-impl FromStr for Direction {
-    type Err = AuraError;
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        let s = s.to_lowercase();
-        match s.as_str() {
-            "right" => Ok(Direction::Right),
-            "up" => Ok(Direction::Up),
-            "down" => Ok(Direction::Down),
-            "left" => Ok(Direction::Left),
-            _ => Err(AuraError::ParseDirection),
-        }
-    }
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct TwoColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the first RGB value e.g, ff00ff")]
-    pub colour: Colour,
-    #[options(no_long, meta = "HEX", help = "set the second RGB value e.g, ff00ff")]
-    pub colour2: Colour,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "WORD", help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleColour {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour: Colour,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct MultiColour {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour1: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour2: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour3: Colour,
-    #[options(meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour4: Colour,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleSpeedDirection {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(
-        no_long,
-        meta = "DIR",
-        help = "set the direction: up, down, left, right"
-    )]
-    pub direction: Direction,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-#[derive(Default, Options, Deserialize, Serialize)]
-pub struct SingleColourSpeed {
-    #[options(help = "print help message")]
-    help: bool,
-    #[options(no_long, meta = "HEX", help = "set the RGB value e.g, ff00ff")]
-    pub colour: Colour,
-    #[options(no_long, help = "set the speed: low, med, high")]
-    pub speed: Speed,
-}
-
-/// Byte value for setting the built-in mode.
-///
-/// Enum corresponds to the required integer value
-#[derive(Options, Deserialize, Serialize)]
-pub enum SetAuraBuiltin {
-    #[options(help = "set a single static colour")]
-    Static(SingleColour),
-    #[options(help = "pulse between one or two colours")]
-    Breathe(TwoColourSpeed),
-    #[options(help = "strobe through all colours")]
-    Strobe(SingleSpeed),
-    #[options(help = "rainbow cycling in one of four directions")]
-    Rainbow(SingleSpeedDirection),
-    #[options(help = "rain pattern mimicking raindrops")]
-    Star(TwoColourSpeed),
-    #[options(help = "rain pattern of three preset colours")]
-    Rain(SingleSpeed),
-    #[options(help = "pressed keys are highlighted to fade")]
-    Highlight(SingleColourSpeed),
-    #[options(help = "pressed keys generate horizontal laser")]
-    Laser(SingleColourSpeed),
-    #[options(help = "pressed keys ripple outwards like a splash")]
-    Ripple(SingleColourSpeed),
-    #[options(help = "set a rapid pulse")]
-    Pulse(SingleColour),
-    #[options(help = "set a vertical line zooming from left")]
-    Comet(SingleColour),
-    #[options(help = "set a wide vertical line zooming from left")]
-    Flash(SingleColour),
-    #[options(help = "4-zone multi-colour")]
-    MultiStatic(MultiColour),
-}
-
-impl Default for SetAuraBuiltin {
-    fn default() -> Self {
-        SetAuraBuiltin::Static(SingleColour {
-            help: false,
-            colour: Colour(255, 0, 0),
-        })
-    }
-}

asus-nb/src/core_dbus.rs

@@ -1,137 +0,0 @@
-use super::*;
-use crate::fancy::KeyColourArray;
-use crate::profile::ProfileEvent;
-use dbus::channel::Sender;
-use dbus::{blocking::Connection, channel::Token, Message};
-use std::error::Error;
-use std::sync::{
-    atomic::{AtomicBool, Ordering},
-    Arc,
-};
-use std::{thread, time::Duration};
-
-/// Simplified way to write a effect block
-pub struct AuraDbusClient {
-    connection: Box<Connection>,
-    block_time: u64,
-    stop: Arc<AtomicBool>,
-    stop_token: Token,
-}
-
-impl AuraDbusClient {
-    #[inline]
-    pub fn new() -> Result<Self, Box<dyn Error>> {
-        let connection = Connection::new_system()?;
-        let stop = Arc::new(AtomicBool::new(false));
-
-        let stopper2 = stop.clone();
-        let match_rule = dbus::message::MatchRule::new_signal(DBUS_IFACE, "KeyBacklightChanged");
-        let stop_token = connection.add_match(match_rule, move |_: (), _, msg| {
-            if msg.read1::<&str>().is_ok() {
-                stopper2.store(true, Ordering::Relaxed);
-            }
-            true
-        })?;
-
-        Ok(AuraDbusClient {
-            connection: Box::new(connection),
-            block_time: 33333,
-            stop,
-            stop_token,
-        })
-    }
-
-    /// This method must always be called before the very first write to initialise
-    /// the keyboard LED EC in the correct mode
-    #[inline]
-    pub fn init_effect(&self) -> Result<(), Box<dyn std::error::Error>> {
-        let mode = AuraModes::PerKey(vec![vec![]]);
-        let mut msg =
-            Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetKeyBacklight")?
-                .append1(serde_json::to_string(&mode)?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    /// Write a single colour block.
-    ///
-    /// Intentionally blocks for 10ms after sending to allow the block to
-    /// be written to the keyboard EC. This should not be async.
-    #[inline]
-    pub fn write_colour_block(
-        &mut self,
-        key_colour_array: &KeyColourArray,
-    ) -> Result<(), Box<dyn Error>> {
-        let group = key_colour_array.get();
-        let mut vecs = Vec::with_capacity(group.len());
-        for v in group {
-            vecs.push(v.to_vec());
-        }
-        let mode = AuraModes::PerKey(vecs);
-        let mut msg =
-            Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetKeyBacklight")?
-                .append1(serde_json::to_string(&mode)?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        thread::sleep(Duration::from_micros(self.block_time));
-        self.connection.process(Duration::from_micros(500))?;
-        if self.stop.load(Ordering::Relaxed) {
-            self.connection.remove_match(self.stop_token)?;
-            println!("Keyboard backlight was changed, exiting");
-            std::process::exit(1)
-        }
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_keyboard_leds(&self, mode: &AuraModes) -> Result<(), Box<dyn std::error::Error>> {
-        let mut msg =
-            Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetKeyBacklight")?
-                .append1(serde_json::to_string(mode)?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_fan_mode(&self, level: u8) -> Result<(), Box<dyn std::error::Error>> {
-        let mut msg = Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "ProfileCommand")?
-            .append1(serde_json::to_string(&ProfileEvent::ChangeMode(level))?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_profile_command(
-        &self,
-        cmd: &ProfileEvent,
-    ) -> Result<(), Box<dyn std::error::Error>> {
-        let mut msg = Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "ProfileCommand")?
-            .append1(serde_json::to_string(cmd)?);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_charge_limit(&self, level: u8) -> Result<(), Box<dyn std::error::Error>> {
-        let mut msg = Message::new_method_call(DBUS_NAME, DBUS_PATH, DBUS_IFACE, "SetChargeLimit")?
-            .append1(level);
-        msg.set_no_reply(true);
-        self.connection.send(msg).unwrap();
-        Ok(())
-    }
-
-    #[inline]
-    pub fn write_builtin_mode(&self, mode: &AuraModes) -> Result<(), Box<dyn std::error::Error>> {
-        self.write_keyboard_leds(mode)
-    }
-
-    #[inline]
-    pub fn write_brightness(&self, level: u8) -> Result<String, Box<dyn std::error::Error>> {
-        self.write_keyboard_leds(&AuraModes::LedBrightness(level))?;
-        Ok(String::new())
-    }
-}

asus-notify/Cargo.toml

@@ -0,0 +1,18 @@
+[package]
+name = "asus-notify"
+version = "3.0.0"
+authors = ["Luke D Jones <luke@ljones.dev>"]
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+# serialisation
+serde_json = "^1.0"
+rog_dbus = { path = "../rog-dbus" }
+daemon = { path = "../daemon" }
+
+[dependencies.notify-rust]
+version = "^4.0"
+default-features = false
+features = ["z"]

asus-notify/src/main.rs

@@ -0,0 +1,110 @@
+use daemon::config::Profile;
+use notify_rust::{Hint, Notification, NotificationHandle};
+use rog_dbus::{DbusProxies, Signals};
+use std::error::Error;
+use std::time::Duration;
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    println!("asus-notify version {}", env!("CARGO_PKG_VERSION"));
+    println!("     daemon version {}", daemon::VERSION);
+    println!("   rog-dbus version {}", rog_dbus::VERSION);
+
+    // let mut cfg = Config::read_new()?;
+    // let mut last_profile = String::new();
+
+    let (proxies, conn) = DbusProxies::new()?;
+    let signals = Signals::new(&proxies)?;
+
+    let mut last_profile_notif: Option<NotificationHandle> = None;
+    let mut last_led_notif: Option<NotificationHandle> = None;
+    let mut last_gfx_notif: Option<NotificationHandle> = None;
+    let mut last_chrg_notif: Option<NotificationHandle> = None;
+
+    let recv = proxies.setup_recv(conn);
+    loop {
+        std::thread::sleep(Duration::from_millis(100));
+        recv.next_signal().unwrap();
+
+        if let Ok(mut lock) = signals.gfx_vendor.lock() {
+            if let Some(vendor) = lock.take() {
+                if let Some(notif) = last_gfx_notif.take() {
+                    notif.close();
+                }
+                let x = do_notif(&format!("Graphics mode changed to {}", vendor))?;
+                last_gfx_notif = Some(x);
+            }
+        }
+
+        if let Ok(mut lock) = signals.charge.lock() {
+            if let Some(limit) = lock.take() {
+                if let Some(notif) = last_chrg_notif.take() {
+                    notif.close();
+                }
+                let x = do_notif(&format!("Battery charge limit changed to {}", limit))?;
+                last_chrg_notif = Some(x);
+            }
+        }
+
+        if let Ok(mut lock) = signals.profile.lock() {
+            if let Some(profile) = lock.take() {
+                if let Some(notif) = last_profile_notif.take() {
+                    notif.close();
+                }
+                if let Ok(profile) = serde_json::from_str(&profile) {
+                    let profile: Profile = profile;
+                    if let Ok(name) = proxies.profile().active_profile_name() {
+                        let x = do_thermal_notif(&profile, &name)?;
+                        last_profile_notif = Some(x);
+                    }
+                }
+            }
+        }
+
+        if let Ok(mut lock) = signals.led_mode.lock() {
+            if let Some(ledmode) = lock.take() {
+                if let Some(notif) = last_led_notif.take() {
+                    notif.close();
+                }
+                let x = do_notif(&format!(
+                    "Keyboard LED mode changed to {}",
+                    <&str>::from(&ledmode)
+                ))?;
+                last_led_notif = Some(x);
+            }
+        }
+    }
+}
+
+fn do_thermal_notif(profile: &Profile, label: &str) -> Result<NotificationHandle, Box<dyn Error>> {
+    let fan = profile.fan_preset;
+    let turbo = if profile.turbo { "enabled" } else { "disabled" };
+    let icon = match fan {
+        0 => "asus_notif_yellow",
+        1 => "asus_notif_red",
+        2 => "asus_notif_green",
+        _ => "asus_notif_red",
+    };
+    let x = Notification::new()
+        .summary("ASUS ROG")
+        .body(&format!(
+            "Thermal profile changed to {}, turbo {}",
+            label.to_uppercase(),
+            turbo
+        ))
+        .hint(Hint::Resident(true))
+        .timeout(2000)
+        .hint(Hint::Category("device".into()))
+        //.hint(Hint::Transient(true))
+        .icon(icon)
+        .show()?;
+    Ok(x)
+}
+
+fn do_notif(body: &str) -> Result<NotificationHandle, Box<dyn Error>> {
+    let x = Notification::new()
+        .summary("ASUS ROG")
+        .body(body)
+        .timeout(2000)
+        .show()?;
+    Ok(x)
+}

asusctl/Cargo.toml

@@ -0,0 +1,21 @@
+[package]
+name = "asusctl"
+version = "3.1.3"
+authors = ["Luke D Jones <luke@ljones.dev>"]
+edition = "2018"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]
+# serialisation
+serde_json = "^1.0"
+rog_dbus = { path = "../rog-dbus" }
+rog_types = { path = "../rog-types" }
+daemon = { path = "../daemon" }
+gumdrop = "^0.8"
+yansi-term = "^0.1"
+
+
+[dev-dependencies]
+tinybmp = "^0.2.3"
+rog_dbus = { path = "../rog-dbus" }

asusctl/examples/animatrix.rs

@@ -1,9 +1,9 @@
-use asus_nb::anime_dbus::AniMeDbusWriter;
-use asus_nb::anime_matrix::{AniMeMatrix, AniMePacketType, HEIGHT, WIDTH};
+use rog_dbus::AuraDbusClient;
+use rog_types::anime_matrix::{AniMeImageBuffer, AniMePacketType, HEIGHT, WIDTH};
 use tinybmp::{Bmp, Pixel};
 
 fn main() {
-    let mut writer = AniMeDbusWriter::new().unwrap();
+    let (client, _) = AuraDbusClient::new().unwrap();
 
     let bmp =
         Bmp::from_slice(include_bytes!("non-skewed_r.bmp")).expect("Failed to parse BMP image");
@@ -11,12 +11,13 @@ fn main() {
     //assert_eq!(pixels.len(), 56 * 56);
 
     // Try an outline, top and right
-    let mut matrix = AniMeMatrix::new();
+    let mut matrix = AniMeImageBuffer::new();
 
     // Aligned left
-    for px in pixels {
+    for (i, px) in pixels.iter().enumerate() {
         if (px.x as usize / 2) < WIDTH && (px.y as usize) < HEIGHT && px.x % 2 == 0 {
-            matrix.get_mut()[px.y as usize][px.x as usize / 2] = px.color as u8;
+            let mut c = px.color as u32;
+            matrix.get_mut()[px.y as usize][px.x as usize / 2] = c as u8;
         }
     }
 
@@ -37,5 +38,5 @@ fn main() {
     // println!("{:?}", matrix[0].to_vec());
     // println!("{:?}", matrix[1].to_vec());
 
-    writer.write_image(&mut matrix).unwrap();
+    //client.proxies().anime().set_brightness(&mut matrix).unwrap();
 }

asusctl/examples/ball.rs

@@ -1,7 +1,5 @@
-use asus_nb::{
-    core_dbus::AuraDbusClient,
-    fancy::{GX502Layout, Key, KeyColourArray, KeyLayout},
-};
+use rog_dbus::AuraDbusClient;
+use rog_types::fancy::{GX502Layout, Key, KeyColourArray, KeyLayout};
 use std::collections::LinkedList;
 
 #[derive(Debug, Clone)]
@@ -54,7 +52,7 @@ impl Ball {
 }
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut writer = AuraDbusClient::new()?;
+    let (dbus, _) = AuraDbusClient::new()?;
 
     let mut colours = KeyColourArray::new();
 
@@ -62,7 +60,7 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
 
     let mut balls = [Ball::new(2, 1, 12), Ball::new(4, 6, 12)];
 
-    writer.init_effect()?;
+    dbus.proxies().led().init_effect()?;
 
     let rows = layout.get_rows();
     loop {
@@ -89,10 +87,8 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
                 *c.2 = 255;
             };
         }
+        dbus.proxies().led().set_per_key(&colours)?;
 
-        writer.write_colour_block(&colours)?;
-
-        // can change 100 times per second, so need to slow it down
-        //std::thread::sleep(std::time::Duration::from_millis(30));
+        std::thread::sleep(std::time::Duration::from_millis(10));
     }
 }

asusctl/examples/comet.rs

@@ -1,14 +1,12 @@
-use asus_nb::{
-    core_dbus::AuraDbusClient,
-    fancy::{GX502Layout, KeyColourArray, KeyLayout},
-};
+use rog_dbus::AuraDbusClient;
+use rog_types::fancy::{GX502Layout, KeyColourArray, KeyLayout};
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut writer = AuraDbusClient::new()?;
+    let (dbus, _) = AuraDbusClient::new()?;
 
     let layout = GX502Layout::default();
 
-    writer.init_effect()?;
+    dbus.proxies().led().init_effect()?;
     let rows = layout.get_rows();
 
     let mut column = 0;
@@ -25,7 +23,6 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
             column += 1;
         }
 
-        writer.write_colour_block(&key_colours)?;
-        std::thread::sleep(std::time::Duration::from_millis(30));
+        dbus.proxies().led().set_per_key(&key_colours)?;
     }
 }

asusctl/examples/iterate-keys.rs

@@ -1,15 +1,13 @@
-use asus_nb::{
-    core_dbus::AuraDbusClient,
-    fancy::{GX502Layout, Key, KeyColourArray, KeyLayout},
-};
+use rog_dbus::AuraDbusClient;
+use rog_types::fancy::{GX502Layout, Key, KeyColourArray, KeyLayout};
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut writer = AuraDbusClient::new()?;
+    let (dbus, _) = AuraDbusClient::new()?;
 
     let mut key_colours = KeyColourArray::new();
     let layout = GX502Layout::default();
 
-    writer.init_effect()?;
+    dbus.proxies().led().init_effect()?;
     let rows = layout.get_rows();
     loop {
         for (r, row) in rows.iter().enumerate() {
@@ -48,7 +46,7 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
                 *key_colours.key(Key::S).unwrap().0 = 255;
                 *key_colours.key(Key::D).unwrap().0 = 255;
 
-                writer.write_colour_block(&key_colours)?;
+                dbus.proxies().led().set_per_key(&key_colours)?;
                 std::thread::sleep(std::time::Duration::from_millis(100));
             }
         }

asusctl/examples/per-key-effect-2.rs

@@ -1,14 +1,12 @@
-use asus_nb::{
-    core_dbus::AuraDbusClient,
-    fancy::{Key, KeyColourArray},
-};
+use rog_dbus::AuraDbusClient;
+use rog_types::fancy::{Key, KeyColourArray};
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut writer = AuraDbusClient::new()?;
+    let (dbus, _) = AuraDbusClient::new()?;
 
     let mut key_colours = KeyColourArray::new();
 
-    writer.init_effect()?;
+    dbus.proxies().led().init_effect()?;
     loop {
         let count = 49;
         for _ in 0..count {
@@ -18,7 +16,7 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
             *key_colours.key(Key::N).unwrap().0 += 5;
             *key_colours.key(Key::U).unwrap().0 += 5;
             *key_colours.key(Key::X).unwrap().0 += 5;
-            writer.write_colour_block(&key_colours)?;
+            dbus.proxies().led().set_per_key(&key_colours)?;
         }
         for _ in 0..count {
             *key_colours.key(Key::ROG).unwrap().0 -= 5;
@@ -27,7 +25,7 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
             *key_colours.key(Key::N).unwrap().0 -= 5;
             *key_colours.key(Key::U).unwrap().0 -= 5;
             *key_colours.key(Key::X).unwrap().0 -= 5;
-            writer.write_colour_block(&key_colours)?;
+            dbus.proxies().led().set_per_key(&key_colours)?;
         }
     }
 }

asusctl/examples/pulser.rs

@@ -1,15 +1,13 @@
-use asus_nb::{
-    core_dbus::AuraDbusClient,
-    fancy::{GX502Layout, KeyColourArray, KeyLayout},
-};
+use rog_dbus::AuraDbusClient;
+use rog_types::fancy::{GX502Layout, KeyColourArray, KeyLayout};
 
 fn main() -> Result<(), Box<dyn std::error::Error>> {
-    let mut writer = AuraDbusClient::new()?;
+    let (dbus, _) = AuraDbusClient::new()?;
 
     let mut key_colours = KeyColourArray::new();
     let layout = GX502Layout::default();
 
-    writer.init_effect()?;
+    dbus.proxies().led().init_effect()?;
     let rows = layout.get_rows();
 
     let mut fade = 50;
@@ -23,7 +21,7 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
             }
         }
 
-        writer.write_colour_block(&key_colours)?;
+        dbus.proxies().led().set_per_key(&key_colours)?;
 
         if flip {
             if fade > 1 {

asusctl/src/main.rs

@@ -0,0 +1,459 @@
+use daemon::{
+    ctrl_fan_cpu::FanCpuSupportedFunctions, ctrl_leds::LedSupportedFunctions,
+    ctrl_rog_bios::RogBiosSupportedFunctions, ctrl_supported::SupportedFunctions,
+};
+use gumdrop::{Opt, Options};
+use rog_dbus::AuraDbusClient;
+use rog_types::{anime_matrix::{AniMeDataBuffer, FULL_PANE_LEN}, aura_modes::AuraModes, cli_options::{AniMeActions, AniMeStatusValue, LedBrightness, SetAuraBuiltin}, gfx_vendors::GfxVendors, profile::{FanLevel, ProfileCommand, ProfileEvent}};
+use std::env::args;
+use yansi_term::Colour::Green;
+use yansi_term::Colour::Red;
+
+#[derive(Default, Options)]
+struct CLIStart {
+    #[options(help_flag, help = "print help message")]
+    help: bool,
+    #[options(help = "show program version number")]
+    version: bool,
+    #[options(help = "show supported functions of this laptop")]
+    show_supported: bool,
+    #[options(meta = "", help = "<off, low, med, high>")]
+    kbd_bright: Option<LedBrightness>,
+    #[options(
+        meta = "",
+        help = "<silent, normal, boost>, set fan mode independent of profile"
+    )]
+    fan_mode: Option<FanLevel>,
+    #[options(meta = "", help = "<20-100>")]
+    chg_limit: Option<u8>,
+    #[options(command)]
+    command: Option<CliCommand>,
+}
+
+#[derive(Options)]
+enum CliCommand {
+    #[options(help = "Set the keyboard lighting from built-in modes")]
+    LedMode(LedModeCommand),
+    #[options(help = "Create and configure profiles")]
+    Profile(ProfileCommand),
+    #[options(help = "Set the graphics mode")]
+    Graphics(GraphicsCommand),
+    #[options(name = "anime", help = "Manage AniMe Matrix")]
+    AniMe(AniMeCommand),
+    #[options(help = "Change bios settings")]
+    Bios(BiosCommand),
+}
+
+#[derive(Options)]
+struct LedModeCommand {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(help = "switch to next aura mode")]
+    next_mode: bool,
+    #[options(help = "switch to previous aura mode")]
+    prev_mode: bool,
+    #[options(command)]
+    command: Option<SetAuraBuiltin>,
+}
+
+#[derive(Options)]
+struct GraphicsCommand {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(
+        meta = "",
+        help = "Set graphics mode: <nvidia, hybrid, compute, integrated>"
+    )]
+    mode: Option<GfxVendors>,
+    #[options(help = "Get the current mode")]
+    get: bool,
+    #[options(help = "Get the current power status")]
+    pow: bool,
+    #[options(help = "Do not ask for confirmation")]
+    force: bool,
+}
+
+#[derive(Options)]
+struct AniMeCommand {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(
+        meta = "",
+        help = "turn on/off the panel (accept/reject write requests)"
+    )]
+    turn: Option<AniMeStatusValue>,
+    #[options(meta = "", help = "turn on/off the panel at boot (with Asus effect)")]
+    boot: Option<AniMeStatusValue>,
+    #[options(command)]
+    command: Option<AniMeActions>,
+}
+
+#[derive(Options, Debug)]
+struct BiosCommand {
+    #[options(help = "print help message")]
+    help: bool,
+    #[options(meta = "", no_long, help = "set bios POST sound <true/false>")]
+    post_sound_set: Option<bool>,
+    #[options(no_long, help = "read bios POST sound")]
+    post_sound_get: bool,
+    #[options(
+        meta = "",
+        no_long,
+        help = "activate dGPU dedicated/G-Sync <true/false>"
+    )]
+    dedicated_gfx_set: Option<bool>,
+    #[options(no_long, help = "get GPU mode")]
+    dedicated_gfx_get: bool,
+}
+
+fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let args: Vec<String> = args().skip(1).collect();
+
+    let parsed: CLIStart;
+    let missing_argument_k = gumdrop::Error::missing_argument(Opt::Short('k'));
+    match CLIStart::parse_args_default(&args) {
+        Ok(p) => {
+            parsed = p;
+        }
+        Err(err) if err.to_string() == missing_argument_k.to_string() => {
+            parsed = CLIStart {
+                kbd_bright: Some(LedBrightness::new(None)),
+                ..Default::default()
+            };
+        }
+        Err(err) => {
+            eprintln!("source {}", err);
+            std::process::exit(2);
+        }
+    }
+
+    let (dbus, _) = AuraDbusClient::new()?;
+
+    let supported_tmp = dbus.proxies().supported().get_supported_functions()?;
+    let supported = serde_json::from_str::<SupportedFunctions>(&supported_tmp)?;
+
+    if parsed.help {
+        print_supported_help(&supported, &parsed);
+        std::process::exit(1);
+    }
+
+    if parsed.version {
+        println!("  asusctl v{}", env!("CARGO_PKG_VERSION"));
+        println!(" rog-dbus v{}", rog_dbus::VERSION);
+        println!("rog-types v{}", rog_types::VERSION);
+        println!("   daemon v{}", daemon::VERSION);
+        return Ok(());
+    }
+
+    match parsed.command {
+        Some(CliCommand::LedMode(mode)) => handle_led_mode(&dbus, &supported.keyboard_led, &mode)?,
+        Some(CliCommand::Profile(cmd)) => handle_profile(&dbus, &supported.fan_cpu_ctrl, &cmd)?,
+        Some(CliCommand::Graphics(cmd)) => do_gfx(&dbus, &supported.rog_bios_ctrl, cmd)?,
+        Some(CliCommand::AniMe(cmd)) => {
+            if (cmd.command.is_none() && cmd.boot.is_none() && cmd.turn.is_none()) || cmd.help {
+                println!("Missing arg or command\n\n{}", cmd.self_usage());
+                if let Some(lst) = cmd.self_command_list() {
+                    println!("\n{}", lst);
+                }
+            }
+            if let Some(anime_turn) = cmd.turn {
+                dbus.proxies().anime().toggle_on(anime_turn.into())?
+            }
+            if let Some(anime_boot) = cmd.boot {
+                dbus.proxies().anime().toggle_boot_on(anime_boot.into())?
+            }
+            if let Some(action) = cmd.command {
+                match action {
+                    AniMeActions::Leds(anime_leds) => {
+                        let mut data = AniMeDataBuffer::new();
+                        data.set([anime_leds.led_brightness(); FULL_PANE_LEN]);
+                        dbus.proxies().anime().write_direct(data)?;
+                    }
+                }
+            }
+        }
+        Some(CliCommand::Bios(cmd)) => handle_bios_option(&dbus, &supported.rog_bios_ctrl, &cmd)?,
+        None => {
+            if (!parsed.show_supported
+                && parsed.kbd_bright.is_none()
+                && parsed.fan_mode.is_none()
+                && parsed.chg_limit.is_none())
+                || parsed.help
+            {
+                println!("{}", CLIStart::usage());
+                println!();
+                println!("{}", CLIStart::command_list().unwrap());
+            }
+        }
+    }
+
+    if let Some(brightness) = parsed.kbd_bright {
+        match brightness.level() {
+            None => {
+                let level = dbus.proxies().led().get_led_brightness()?;
+                println!("Current keyboard led brightness: {}", level.to_string());
+            }
+            Some(level) => dbus.proxies().led().set_brightness(level)?,
+        }
+    }
+
+    if parsed.show_supported {
+        let dat = dbus.proxies().supported().get_supported_functions()?;
+        println!("Supported laptop functions:\n{}", dat.to_string());
+    }
+
+    if let Some(fan_level) = parsed.fan_mode {
+        dbus.proxies().profile().write_fan_mode(fan_level.into())?;
+    }
+    if let Some(chg_limit) = parsed.chg_limit {
+        dbus.proxies().charge().write_limit(chg_limit)?;
+    }
+    Ok(())
+}
+
+fn print_supported_help(supported: &SupportedFunctions, parsed: &CLIStart) {
+    // As help option don't work with `parse_args_default`
+    // we will call `parse_args_default_or_exit` instead
+    let usage: Vec<String> = parsed.self_usage().lines().map(|s| s.to_string()).collect();
+    for line in usage.iter().filter(|line| {
+        if line.contains("--fan-mode") && !supported.fan_cpu_ctrl.stock_fan_modes {
+            return false;
+        }
+        if line.contains("--chg-limit") && !supported.charge_ctrl.charge_level_set {
+            return false;
+        }
+        true
+    }) {
+        println!("{}", line);
+    }
+
+    // command strings are in order of the struct
+    let commands: Vec<String> = CliCommand::usage().lines().map(|s| s.to_string()).collect();
+    println!("\nCommands available");
+    for line in commands.iter().filter(|line| {
+        if line.contains("profile")
+            && !supported.fan_cpu_ctrl.stock_fan_modes
+            && !supported.fan_cpu_ctrl.fan_curve_set
+        {
+            return false;
+        }
+        if line.contains("led-mode") && supported.keyboard_led.stock_led_modes.is_none() {
+            return false;
+        }
+        if line.contains("bios")
+            && (!supported.rog_bios_ctrl.dedicated_gfx_toggle
+                || !supported.rog_bios_ctrl.post_sound_toggle)
+        {
+            return false;
+        }
+        if line.contains("anime") && !supported.anime_ctrl.0 {
+            return false;
+        }
+        true
+    }) {
+        println!("{}", line);
+    }
+
+    if !supported.fan_cpu_ctrl.stock_fan_modes {
+        println!("Note: Fan mode control is not supported by this laptop");
+    }
+    if !supported.charge_ctrl.charge_level_set {
+        println!("Note: Charge control is not supported by this laptop");
+    }
+}
+
+fn do_gfx(
+    dbus: &AuraDbusClient,
+    supported: &RogBiosSupportedFunctions,
+    command: GraphicsCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if command.mode.is_none() && !command.get && !command.pow && !command.force || command.help {
+        println!("{}", command.self_usage());
+    }
+
+    if let Some(mode) = command.mode {
+        if supported.dedicated_gfx_toggle {
+            if dbus.proxies().rog_bios().get_dedicated_gfx()? == 1 {
+                println!("You can not change modes until you turn dedicated/G-Sync off and reboot");
+                std::process::exit(-1);
+            }
+        }
+
+        println!(
+            "Your display-manager will restart in requested mode when all users are logged out"
+        );
+        println!("If anything fails check `journalctl -b -u asusd`");
+
+        dbus.proxies().gfx().gfx_write_mode(mode.into())?;
+        let res = dbus.gfx_wait_changed()?;
+        println!("{}", res);
+        std::process::exit(0)
+    }
+    if command.get {
+        let res = dbus.proxies().gfx().gfx_get_mode()?;
+        println!("Current graphics mode: {}", res);
+    }
+    if command.pow {
+        let res = dbus.proxies().gfx().gfx_get_pwr()?;
+        if res.contains("active") {
+            println!("Current power status: {}", Red.paint(&format!("{}", res)));
+        } else {
+            println!("Current power status: {}", Green.paint(&format!("{}", res)));
+        }
+    }
+    Ok(())
+}
+
+fn handle_led_mode(
+    dbus: &AuraDbusClient,
+    supported: &LedSupportedFunctions,
+    mode: &LedModeCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if mode.command.is_none() && !mode.prev_mode && !mode.next_mode {
+        if !mode.help {
+            println!("Missing arg or command\n");
+        }
+        println!("{}\n", mode.self_usage());
+        println!("Commands available");
+
+        let commands: Vec<String> = LedModeCommand::command_list()
+            .unwrap()
+            .lines()
+            .map(|s| s.to_string())
+            .collect();
+        for (_, command) in commands.iter().enumerate().filter(|(mode_num, _)| {
+            if let Some(modes) = supported.stock_led_modes.as_ref() {
+                return modes.contains(&(*mode_num as u8));
+            }
+            false
+        }) {
+            println!("{}", command);
+        }
+
+        println!("\nHelp can also be requested on modes, e.g: static --help");
+        return Ok(());
+    }
+
+    if mode.next_mode && mode.prev_mode {
+        println!("Please specify either next or previous");
+        return Ok(());
+    }
+    if mode.next_mode {
+        dbus.proxies().led().next_led_mode()?;
+    } else if mode.prev_mode {
+        dbus.proxies().led().prev_led_mode()?;
+    } else if let Some(mode) = mode.command.as_ref() {
+        if mode.help_requested() {
+            println!("{}", mode.self_usage());
+            return Ok(());
+        }
+        dbus.proxies().led().set_led_mode(&<AuraModes>::from(mode))?;
+    }
+    Ok(())
+}
+
+fn handle_profile(
+    dbus: &AuraDbusClient,
+    supported: &FanCpuSupportedFunctions,
+    cmd: &ProfileCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    if !cmd.next
+        && !cmd.create
+        && cmd.curve.is_none()
+        && cmd.max_percentage.is_none()
+        && cmd.min_percentage.is_none()
+        && cmd.fan_preset.is_none()
+        && cmd.profile.is_none()
+        && cmd.turbo.is_none()
+    {
+        if !cmd.help {
+            println!("Missing arg or command\n");
+        }
+        let usage: Vec<String> = ProfileCommand::usage()
+            .lines()
+            .map(|s| s.to_string())
+            .collect();
+        for line in usage
+            .iter()
+            .filter(|line| !(line.contains("--curve") && !supported.fan_curve_set))
+        {
+            println!("{}", line);
+        }
+
+        if let Some(lst) = cmd.self_command_list() {
+            println!("\n{}", lst);
+        }
+        std::process::exit(1);
+    }
+    if cmd.next {
+        dbus.proxies().profile().next_fan()?;
+    } else {
+        dbus.proxies()
+            .profile()
+            .write_command(&ProfileEvent::Cli(cmd.clone()))?
+    }
+
+    Ok(())
+}
+
+fn handle_bios_option(
+    dbus: &AuraDbusClient,
+    supported: &RogBiosSupportedFunctions,
+    cmd: &BiosCommand,
+) -> Result<(), Box<dyn std::error::Error>> {
+    {
+        if (cmd.dedicated_gfx_set.is_none()
+            && !cmd.dedicated_gfx_get
+            && cmd.post_sound_set.is_none()
+            && !cmd.post_sound_get)
+            || cmd.help
+        {
+            println!("Missing arg or command\n");
+
+            let usage: Vec<String> = BiosCommand::usage()
+                .lines()
+                .map(|s| s.to_string())
+                .collect();
+
+            for line in usage.iter().filter(|line| {
+                !(line.contains("sound") && !supported.post_sound_toggle)
+                    || !(line.contains("GPU") && !supported.dedicated_gfx_toggle)
+            }) {
+                println!("{}", line);
+            }
+        }
+
+        if let Some(opt) = cmd.post_sound_set {
+            dbus.proxies().rog_bios().set_post_sound(opt)?;
+        }
+        if cmd.post_sound_get {
+            let res = if dbus.proxies().rog_bios().get_post_sound()? == 1 {
+                true
+            } else {
+                false
+            };
+            println!("Bios POST sound on: {}", res);
+        }
+        if let Some(opt) = cmd.dedicated_gfx_set {
+            println!("Rebuilding initrd to include drivers");
+            dbus.proxies().rog_bios().set_dedicated_gfx(opt)?;
+            println!("The mode change is not active until you reboot, on boot the bios will make the required change");
+            if opt {
+                println!(
+                    "NOTE: on reboot your display manager will be forced to use Nvidia drivers"
+                );
+            } else {
+                println!("NOTE: after reboot you can then select regular graphics modes");
+            }
+        }
+        if cmd.dedicated_gfx_get {
+            let res = if dbus.proxies().rog_bios().get_dedicated_gfx()? == 1 {
+                true
+            } else {
+                false
+            };
+            println!("Bios dedicated GPU on: {}", res);
+        }
+    }
+    Ok(())
+}

daemon/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
-name = "asus-nb-ctrl"
-version = "1.1.2"
+name = "daemon"
+version = "3.1.6"
 license = "MPL-2.0"
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
@@ -13,38 +13,31 @@ edition = "2018"
 name = "daemon"
 path = "src/lib.rs"
 
-[[bin]]
-name = "asusctl"
-path = "src/main.rs"
-
 [[bin]]
 name = "asusd"
 path = "src/daemon.rs"
 
 [dependencies]
-asus-nb = { path = "../asus-nb" }
-rusb = "^0.6.0"
-udev = "^0.4.0"
-async-trait = "0.1.36"
+rog_types = { path = "../rog-types" }
+rog_dbus = { path = "../rog-dbus" }
+rusb = "^0.7"
+udev = "^0.6"
 
 # cli and logging
-gumdrop = "^0.8.0"
-log = "^0.4.8"
-env_logger = "^0.7.1"
+log = "^0.4"
+env_logger = "^0.8"
 
-# async
-dbus = { version = "^0.8.2", features = ["futures"] }
-dbus-tokio = "^0.5.1"
-tokio = { version = "^0.2.4", features = ["rt-threaded", "sync"] }
+zbus = "^1.8"
+zvariant = "^2.4"
 
 # serialisation
 serde = "^1.0"
 serde_derive = "^1.0"
 serde_json = "^1.0"
-toml = "0.4.6"
+toml = "^0.5"
 
 # Device control
 sysfs-class = "^0.1.2" # used for backlight control and baord ID
-rog_fan_curve = { version = "0.1.5", features = ["serde"] }
+rog_fan_curve = { version = "0.1", features = ["serde"] }
 # cpu power management
-intel-pstate = "^0.2.1"
+intel-pstate = "^0.2"

daemon/src/config.rs

@@ -0,0 +1,204 @@
+use log::{error, info, warn};
+use rog_fan_curve::Curve;
+use rog_types::{aura_modes::AuraModes, gfx_vendors::GfxVendors};
+use serde_derive::{Deserialize, Serialize};
+use std::collections::BTreeMap;
+use std::fs::{File, OpenOptions};
+use std::io::{Read, Write};
+
+use crate::config_old::*;
+use crate::VERSION;
+
+pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
+
+#[derive(Deserialize, Serialize)]
+pub struct Config {
+    pub gfx_mode: GfxVendors,
+    pub gfx_managed: bool,
+    pub active_profile: String,
+    pub toggle_profiles: Vec<String>,
+    #[serde(skip)]
+    pub curr_fan_mode: u8,
+    pub bat_charge_limit: u8,
+    pub kbd_led_brightness: u8,
+    pub kbd_backlight_mode: u8,
+    pub kbd_backlight_modes: Vec<AuraModes>,
+    pub power_profiles: BTreeMap<String, Profile>,
+}
+
+impl Default for Config {
+    fn default() -> Self {
+        let mut pwr = BTreeMap::new();
+        pwr.insert("normal".into(), Profile::new(0, 100, true, 0, None));
+        pwr.insert("boost".into(), Profile::new(0, 100, true, 1, None));
+        pwr.insert("silent".into(), Profile::new(0, 100, true, 2, None));
+
+        Config {
+            gfx_mode: GfxVendors::Hybrid,
+            gfx_managed: true,
+            active_profile: "normal".into(),
+            toggle_profiles: vec!["normal".into(), "boost".into(), "silent".into()],
+            curr_fan_mode: 0,
+            bat_charge_limit: 100,
+            kbd_led_brightness: 1,
+            kbd_backlight_mode: 0,
+            kbd_backlight_modes: Vec::new(),
+            power_profiles: pwr,
+        }
+    }
+}
+
+impl Config {
+    /// `load` will attempt to read the config, and panic if the dir is missing
+    pub fn load(supported_led_modes: &[u8]) -> Self {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .create(true)
+            .open(&CONFIG_PATH)
+            .expect(&format!(
+                "The file {} or directory /etc/asusd/ is missing",
+                CONFIG_PATH
+            )); // okay to cause panic here
+        let mut buf = String::new();
+        if let Ok(read_len) = file.read_to_string(&mut buf) {
+            if read_len == 0 {
+                return Config::create_default(&mut file, &supported_led_modes);
+            } else {
+                if let Ok(data) = serde_json::from_str(&buf) {
+                    return data;
+                } else if let Ok(data) = serde_json::from_str::<ConfigV301>(&buf) {
+                    let config = data.into_current();
+                    config.write();
+                    info!("Updated config version to: {}", VERSION);
+                    return config;
+                } else if let Ok(data) = serde_json::from_str::<ConfigV222>(&buf) {
+                    let config = data.into_current();
+                    config.write();
+                    info!("Updated config version to: {}", VERSION);
+                    return config;
+                } else if let Ok(data) = serde_json::from_str::<ConfigV212>(&buf) {
+                    let config = data.into_current();
+                    config.write();
+                    info!("Updated config version to: {}", VERSION);
+                    return config;
+                }
+                warn!("Could not deserialise {}", CONFIG_PATH);
+                panic!("Please remove {} then restart asusd", CONFIG_PATH);
+            }
+        }
+        Config::create_default(&mut file, &supported_led_modes)
+    }
+
+    fn create_default(file: &mut File, supported_led_modes: &[u8]) -> Self {
+        // create a default config here
+        let mut config = Config::default();
+
+        for n in supported_led_modes {
+            config.kbd_backlight_modes.push(AuraModes::from(*n))
+        }
+
+        // Should be okay to unwrap this as is since it is a Default
+        let json = serde_json::to_string_pretty(&config).unwrap();
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|_| panic!("Could not write {}", CONFIG_PATH));
+        config
+    }
+
+    pub fn read(&mut self) {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
+        let mut buf = String::new();
+        if let Ok(l) = file.read_to_string(&mut buf) {
+            if l == 0 {
+                warn!("File is empty {}", CONFIG_PATH);
+            } else {
+                let x: Config = serde_json::from_str(&buf)
+                    .unwrap_or_else(|_| panic!("Could not deserialise {}", CONFIG_PATH));
+                *self = x;
+            }
+        }
+    }
+
+    pub fn read_new() -> Result<Config, Box<dyn std::error::Error>> {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&CONFIG_PATH)
+            .unwrap_or_else(|err| panic!("Error reading {}: {}", CONFIG_PATH, err));
+        let mut buf = String::new();
+        file.read_to_string(&mut buf)?;
+        let x: Config = serde_json::from_str(&buf)?;
+        Ok(x)
+    }
+
+    pub fn write(&self) {
+        let mut file = File::create(CONFIG_PATH).expect("Couldn't overwrite config");
+        let json = serde_json::to_string_pretty(self).expect("Parse config to JSON failed");
+        file.write_all(json.as_bytes())
+            .unwrap_or_else(|err| error!("Could not write config: {}", err));
+    }
+
+    pub fn set_mode_data(&mut self, mode: AuraModes) {
+        let byte: u8 = (&mode).into();
+        for (index, n) in self.kbd_backlight_modes.iter().enumerate() {
+            if byte == u8::from(n) {
+                // Consume it, OMNOMNOMNOM
+                self.kbd_backlight_modes[index] = mode;
+                break;
+            }
+        }
+    }
+
+    pub fn get_led_mode_data(&self, num: u8) -> Option<&AuraModes> {
+        for mode in &self.kbd_backlight_modes {
+            if u8::from(mode) == num {
+                return Some(mode);
+            }
+        }
+        None
+    }
+}
+
+#[derive(Deserialize, Serialize)]
+pub struct Profile {
+    pub min_percentage: u8,
+    pub max_percentage: u8,
+    pub turbo: bool,
+    pub fan_preset: u8,
+    pub fan_curve: Option<Curve>,
+}
+
+#[deprecated]
+pub type CPUSettings = Profile;
+
+impl Default for Profile {
+    fn default() -> Self {
+        Profile {
+            min_percentage: 0,
+            max_percentage: 100,
+            turbo: false,
+            fan_preset: 0,
+            fan_curve: None,
+        }
+    }
+}
+
+impl Profile {
+    pub fn new(
+        min_percentage: u8,
+        max_percentage: u8,
+        turbo: bool,
+        fan_preset: u8,
+        fan_curve: Option<Curve>,
+    ) -> Self {
+        Profile {
+            min_percentage,
+            max_percentage,
+            turbo,
+            fan_preset,
+            fan_curve,
+        }
+    }
+}

daemon/src/config_old.rs

@@ -0,0 +1,100 @@
+use rog_types::{aura_modes::AuraModes, gfx_vendors::GfxVendors};
+use serde_derive::{Deserialize, Serialize};
+use std::collections::BTreeMap;
+
+use crate::config::{Config, Profile};
+
+/// for parsing old v2.1.2 config
+#[derive(Deserialize)]
+pub(crate) struct ConfigV212 {
+    gfx_managed: bool,
+    bat_charge_limit: u8,
+    active_profile: String,
+    toggle_profiles: Vec<String>,
+    power_profiles: BTreeMap<String, Profile>,
+    power_profile: u8,
+    kbd_led_brightness: u8,
+    kbd_backlight_mode: u8,
+    kbd_backlight_modes: Vec<AuraModes>,
+}
+
+impl ConfigV212 {
+    pub(crate) fn into_current(self) -> Config {
+        Config {
+            gfx_mode: GfxVendors::Hybrid,
+            gfx_managed: self.gfx_managed,
+            active_profile: self.active_profile,
+            toggle_profiles: self.toggle_profiles,
+            curr_fan_mode: self.power_profile,
+            bat_charge_limit: self.bat_charge_limit,
+            kbd_led_brightness: self.kbd_led_brightness,
+            kbd_backlight_mode: self.kbd_backlight_mode,
+            kbd_backlight_modes: self.kbd_backlight_modes,
+            power_profiles: self.power_profiles,
+        }
+    }
+}
+
+/// for parsing old v2.2.2 config
+#[derive(Deserialize)]
+pub(crate) struct ConfigV222 {
+    gfx_managed: bool,
+    bat_charge_limit: u8,
+    active_profile: String,
+    toggle_profiles: Vec<String>,
+    power_profiles: BTreeMap<String, Profile>,
+    power_profile: u8,
+    kbd_led_brightness: u8,
+    kbd_backlight_mode: u8,
+    kbd_backlight_modes: Vec<AuraModes>,
+}
+
+impl ConfigV222 {
+    pub(crate) fn into_current(self) -> Config {
+        Config {
+            gfx_mode: GfxVendors::Hybrid,
+            gfx_managed: self.gfx_managed,
+            active_profile: self.active_profile,
+            toggle_profiles: self.toggle_profiles,
+            curr_fan_mode: self.power_profile,
+            bat_charge_limit: self.bat_charge_limit,
+            kbd_led_brightness: self.kbd_led_brightness,
+            kbd_backlight_mode: self.kbd_backlight_mode,
+            kbd_backlight_modes: self.kbd_backlight_modes,
+            power_profiles: self.power_profiles,
+        }
+    }
+}
+
+#[derive(Deserialize, Serialize)]
+pub(crate) struct ConfigV301 {
+    pub gfx_managed: bool,
+    pub gfx_nv_mode_is_dedicated: bool,
+    pub active_profile: String,
+    pub toggle_profiles: Vec<String>,
+    // TODO: remove power_profile
+    #[serde(skip)]
+    pub curr_fan_mode: u8,
+    pub bat_charge_limit: u8,
+    pub kbd_led_brightness: u8,
+    pub kbd_backlight_mode: u8,
+    pub kbd_backlight_modes: Vec<AuraModes>,
+    pub power_profiles: BTreeMap<String, Profile>,
+}
+
+impl ConfigV301 {
+    pub(crate) fn into_current(self) -> Config {
+        Config {
+            gfx_mode: GfxVendors::Hybrid,
+            gfx_managed: self.gfx_managed,
+            active_profile: self.active_profile,
+            toggle_profiles: self.toggle_profiles,
+            curr_fan_mode: self.curr_fan_mode,
+            bat_charge_limit: self.bat_charge_limit,
+            kbd_led_brightness: self.kbd_led_brightness,
+            kbd_backlight_mode: self.kbd_backlight_mode,
+            kbd_backlight_modes: self.kbd_backlight_modes,
+            power_profiles: self.power_profiles,
+        }
+    }
+}

daemon/src/ctrl_anime.rs

@@ -0,0 +1,265 @@
+const INIT_STR: &str = "ASUS Tech.Inc.";
+const PACKET_SIZE: usize = 640;
+
+// Only these two packets must be 17 bytes
+const DEV_PAGE: u8 = 0x5e;
+// These bytes are in [1] position of the array
+const WRITE: u8 = 0xc0;
+const INIT: u8 = 0xc2;
+const SET: u8 = 0xc3;
+const APPLY: u8 = 0xc4;
+
+// Used to turn the panel on and off
+// The next byte can be 0x03 for "on" and 0x00 for "off"
+const ON_OFF: u8 = 0x04;
+
+use log::{error, info, warn};
+use rog_types::{
+    anime_matrix::{
+        AniMeDataBuffer, AniMeImageBuffer, AniMePacketType, ANIME_PANE1_PREFIX, ANIME_PANE2_PREFIX,
+    },
+    error::AuraError,
+};
+use rusb::{Device, DeviceHandle};
+use std::convert::TryInto;
+use std::error::Error;
+use std::time::Duration;
+use zbus::dbus_interface;
+
+use crate::GetSupported;
+
+use serde_derive::{Deserialize, Serialize};
+#[derive(Serialize, Deserialize)]
+pub struct AnimeSupportedFunctions(pub bool);
+
+impl GetSupported for CtrlAnimeDisplay {
+    type A = AnimeSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        AnimeSupportedFunctions(CtrlAnimeDisplay::get_device(0x0b05, 0x193b).is_ok())
+    }
+}
+
+pub struct CtrlAnimeDisplay {
+    handle: DeviceHandle<rusb::GlobalContext>,
+}
+
+//AnimatrixWrite
+pub trait Dbus {
+    /// Write an image 34x56 pixels. Each pixel is 0-255 greyscale.
+    fn write_image(&self, input: AniMeImageBuffer);
+
+    /// Write a direct stream of data
+    fn write_direct(&self, input: AniMeDataBuffer);
+
+    fn set_on_off(&self, status: bool);
+
+    fn set_boot_on_off(&self, status: bool);
+}
+
+impl crate::ZbusAdd for CtrlAnimeDisplay {
+    fn add_to_server(self, server: &mut zbus::ObjectServer) {
+        server
+            .at(&"/org/asuslinux/Anime".try_into().unwrap(), self)
+            .map_err(|err| {
+                warn!("CtrlAnimeDisplay: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl Dbus for CtrlAnimeDisplay {
+    /// Writes a 34x56 image
+    fn write_image(&self, input: AniMeImageBuffer) {
+        self.write_image_buffer(input)
+            .map_or_else(|err| warn!("{}", err), |()| info!("Writing image to Anime"));
+    }
+
+    /// Writes a data stream of length
+    fn write_direct(&self, input: AniMeDataBuffer) {
+        self.write_data_buffer(input)
+            .map_or_else(|err| warn!("{}", err), |()| info!("Writing data to Anime"));
+    }
+
+    fn set_on_off(&self, status: bool) {
+        let mut buffer = [0u8; PACKET_SIZE];
+        buffer[0] = DEV_PAGE;
+        buffer[1] = WRITE;
+        buffer[2] = ON_OFF;
+
+        if status {
+            buffer[3] = 0x03;
+        } else {
+            buffer[3] = 0x00;
+        }
+
+        self.write_bytes(&buffer);
+    }
+
+    fn set_boot_on_off(&self, status: bool) {
+        let status_str = if status { "on" } else { "off" };
+
+        self.do_set_boot(status).map_or_else(
+            |err| warn!("{}", err),
+            |()| info!("Turning {} the AniMe at boot/shutdown", status_str),
+        );
+        self.do_apply().map_or_else(
+            |err| warn!("{}", err),
+            |()| info!("Turning {} the AniMe at boot/shutdown", status_str),
+        );
+    }
+}
+
+impl CtrlAnimeDisplay {
+    #[inline]
+    pub fn new() -> Result<CtrlAnimeDisplay, Box<dyn Error>> {
+        // We don't expect this ID to ever change
+        let device = CtrlAnimeDisplay::get_device(0x0b05, 0x193b)?;
+
+        let mut device = device.open()?;
+        device.reset()?;
+
+        device.set_auto_detach_kernel_driver(true).map_err(|err| {
+            error!("Auto-detach kernel driver failed: {}", err);
+            err
+        })?;
+
+        device.claim_interface(0).map_err(|err| {
+            error!("Could not claim device interface: {}", err);
+            err
+        })?;
+
+        info!("Device has an AniMe Matrix display");
+        let ctrl = CtrlAnimeDisplay { handle: device };
+        ctrl.do_initialization()?;
+
+        Ok(ctrl)
+    }
+
+    #[inline]
+    fn get_device(vendor: u16, product: u16) -> Result<Device<rusb::GlobalContext>, rusb::Error> {
+        for device in rusb::devices()?.iter() {
+            let device_desc = device.device_descriptor()?;
+            if device_desc.vendor_id() == vendor && device_desc.product_id() == product {
+                return Ok(device);
+            }
+        }
+        Err(rusb::Error::NoDevice)
+    }
+
+    /// Should only be used if the bytes you are writing are verified correct
+    #[inline]
+    fn write_bytes(&self, message: &[u8]) {
+        match self.handle.write_control(
+            0x21,  // request_type
+            0x09,  // request
+            0x35e, // value
+            0x00,  // index
+            message,
+            Duration::from_millis(200),
+        ) {
+            Ok(_) => {}
+            Err(err) => match err {
+                rusb::Error::Timeout => {}
+                _ => error!("Failed to write to led interrupt: {}", err),
+            },
+        }
+    }
+    #[inline]
+    fn write_data_buffer(&self, buffer: AniMeDataBuffer) -> Result<(), AuraError> {
+        let mut image = AniMePacketType::from(buffer);
+        image[0][..7].copy_from_slice(&ANIME_PANE1_PREFIX);
+        image[1][..7].copy_from_slice(&ANIME_PANE2_PREFIX);
+
+        for row in image.iter() {
+            self.write_bytes(row);
+        }
+        self.do_flush()?;
+        Ok(())
+    }
+
+    /// Write an Animatrix image
+    ///
+    /// The expected USB input here is *two* Vectors, 640 bytes in length. The two vectors
+    /// are each one half of the full image write.
+    ///
+    /// After each write a flush is written, it is assumed that this tells the device to
+    /// go ahead and display the written bytes
+    ///
+    /// # Note:
+    /// The vectors are expected to contain the full sequence of bytes as follows
+    ///
+    /// - Write pane 1: 0x5e 0xc0 0x02 0x01 0x00 0x73 0x02 .. <led brightness>
+    /// - Write pane 2: 0x5e 0xc0 0x02 0x74 0x02 0x73 0x02 .. <led brightness>
+    ///
+    /// Where led brightness is 0..255, low to high
+    #[inline]
+    fn write_image_buffer(&self, buffer: AniMeImageBuffer) -> Result<(), AuraError> {
+        let mut image = AniMePacketType::from(buffer);
+        image[0][..7].copy_from_slice(&ANIME_PANE1_PREFIX);
+        image[1][..7].copy_from_slice(&ANIME_PANE2_PREFIX);
+
+        for row in image.iter() {
+            self.write_bytes(row);
+        }
+        self.do_flush()?;
+        Ok(())
+    }
+
+    #[inline]
+    fn do_initialization(&self) -> Result<(), AuraError> {
+        let mut init = [0; PACKET_SIZE];
+        init[0] = DEV_PAGE; // This is the USB page we're using throughout
+        for (idx, byte) in INIT_STR.as_bytes().iter().enumerate() {
+            init[idx + 1] = *byte
+        }
+        self.write_bytes(&init);
+
+        // clear the init array and write other init message
+        for ch in init.iter_mut() {
+            *ch = 0;
+        }
+        init[0] = DEV_PAGE; // write it to be sure?
+        init[1] = INIT;
+
+        self.write_bytes(&init);
+        Ok(())
+    }
+
+    #[inline]
+    fn do_flush(&self) -> Result<(), AuraError> {
+        let mut flush = [0; PACKET_SIZE];
+        flush[0] = DEV_PAGE;
+        flush[1] = WRITE;
+        flush[2] = 0x03;
+
+        self.write_bytes(&flush);
+        Ok(())
+    }
+
+    #[inline]
+    fn do_set_boot(&self, status: bool) -> Result<(), AuraError> {
+        let mut flush = [0; PACKET_SIZE];
+        flush[0] = DEV_PAGE;
+        flush[1] = SET;
+        flush[2] = 0x01;
+        flush[3] = if status { 0x00 } else { 0x80 };
+
+        self.write_bytes(&flush);
+        Ok(())
+    }
+
+    #[inline]
+    fn do_apply(&self) -> Result<(), AuraError> {
+        let mut flush = [0; PACKET_SIZE];
+        flush[0] = DEV_PAGE;
+        flush[1] = APPLY;
+        flush[2] = 0x01;
+        flush[3] = 0x80;
+
+        self.write_bytes(&flush);
+        Ok(())
+    }
+}

daemon/src/ctrl_charge.rs

@@ -0,0 +1,125 @@
+use crate::{config::Config, error::RogError, GetSupported};
+//use crate::dbus::DbusEvents;
+use log::{info, warn};
+use serde_derive::{Deserialize, Serialize};
+use std::convert::TryInto;
+use std::fs::OpenOptions;
+use std::io::Write;
+use std::path::Path;
+use std::sync::Arc;
+use std::sync::Mutex;
+use zbus::dbus_interface;
+
+static BAT_CHARGE_PATH: &str = "/sys/class/power_supply/BAT0/charge_control_end_threshold";
+
+#[derive(Serialize, Deserialize)]
+pub struct ChargeSupportedFunctions {
+    pub charge_level_set: bool,
+}
+
+impl GetSupported for CtrlCharge {
+    type A = ChargeSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        ChargeSupportedFunctions {
+            charge_level_set: CtrlCharge::get_battery_path().is_ok(),
+        }
+    }
+}
+
+pub struct CtrlCharge {
+    config: Arc<Mutex<Config>>,
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlCharge {
+    pub fn set_limit(&mut self, limit: u8) {
+        if let Ok(mut config) = self.config.try_lock() {
+            self.set(limit, &mut config)
+                .map_err(|err| {
+                    warn!("CtrlCharge: set_limit {}", err);
+                    err
+                })
+                .ok();
+            self.notify_charge(limit)
+                .map_err(|err| {
+                    warn!("CtrlCharge: set_limit {}", err);
+                    err
+                })
+                .ok();
+        }
+    }
+
+    pub fn limit(&self) -> i8 {
+        if let Ok(config) = self.config.try_lock() {
+            return config.bat_charge_limit as i8;
+        }
+        -1
+    }
+
+    #[dbus_interface(signal)]
+    pub fn notify_charge(&self, limit: u8) -> zbus::Result<()> {}
+}
+
+impl crate::ZbusAdd for CtrlCharge {
+    fn add_to_server(self, server: &mut zbus::ObjectServer) {
+        server
+            .at(&"/org/asuslinux/Charge".try_into().unwrap(), self)
+            .map_err(|err| {
+                warn!("CtrlCharge: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+impl crate::Reloadable for CtrlCharge {
+    fn reload(&mut self) -> Result<(), RogError> {
+        if let Ok(mut config) = self.config.try_lock() {
+            config.read();
+            self.set(config.bat_charge_limit, &mut config)?;
+        }
+        Ok(())
+    }
+}
+
+impl CtrlCharge {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        CtrlCharge::get_battery_path()?;
+        Ok(CtrlCharge { config })
+    }
+
+    fn get_battery_path() -> Result<&'static str, RogError> {
+        if Path::new(BAT_CHARGE_PATH).exists() {
+            Ok(BAT_CHARGE_PATH)
+        } else {
+            Err(RogError::MissingFunction(
+                "Charge control not available, you may require a v5.8.10 series kernel or newer"
+                    .into(),
+            ))
+        }
+    }
+
+    pub(super) fn set(&self, limit: u8, config: &mut Config) -> Result<(), RogError> {
+        if !(20..=100).contains(&limit) {
+            warn!(
+                "Unable to set battery charge limit, must be between 20-100: requested {}",
+                limit
+            );
+        }
+
+        let mut file = OpenOptions::new()
+            .write(true)
+            .open(BAT_CHARGE_PATH)
+            .map_err(|err| RogError::Path(BAT_CHARGE_PATH.into(), err))?;
+        file.write_all(limit.to_string().as_bytes())
+            .map_err(|err| RogError::Write(BAT_CHARGE_PATH.into(), err))?;
+        info!("Battery charge limit: {}", limit);
+
+        config.read();
+        config.bat_charge_limit = limit;
+        config.write();
+
+        Ok(())
+    }
+}

daemon/src/ctrl_fan_cpu.rs

@@ -0,0 +1,353 @@
+use crate::error::RogError;
+use crate::{
+    config::{Config, Profile},
+    GetSupported,
+};
+use log::{info, warn};
+use rog_types::profile::{FanLevel, ProfileEvent};
+use serde_derive::{Deserialize, Serialize};
+use std::convert::TryInto;
+use std::fs::OpenOptions;
+use std::io::Write;
+use std::path::Path;
+use std::sync::Arc;
+use std::sync::Mutex;
+use zbus::dbus_interface;
+
+static FAN_TYPE_1_PATH: &str = "/sys/devices/platform/asus-nb-wmi/throttle_thermal_policy";
+static FAN_TYPE_2_PATH: &str = "/sys/devices/platform/asus-nb-wmi/fan_boost_mode";
+static AMD_BOOST_PATH: &str = "/sys/devices/system/cpu/cpufreq/boost";
+
+pub struct CtrlFanAndCPU {
+    pub path: &'static str,
+    config: Arc<Mutex<Config>>,
+}
+
+#[derive(Serialize, Deserialize)]
+pub struct FanCpuSupportedFunctions {
+    pub stock_fan_modes: bool,
+    pub min_max_freq: bool,
+    pub fan_curve_set: bool,
+}
+
+impl GetSupported for CtrlFanAndCPU {
+    type A = FanCpuSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        FanCpuSupportedFunctions {
+            stock_fan_modes: CtrlFanAndCPU::get_fan_path().is_ok(),
+            min_max_freq: intel_pstate::PState::new().is_ok(),
+            fan_curve_set: rog_fan_curve::Board::from_board_name().is_some(),
+        }
+    }
+}
+
+pub struct DbusFanAndCpu {
+    inner: Arc<Mutex<CtrlFanAndCPU>>,
+}
+
+impl DbusFanAndCpu {
+    pub fn new(inner: Arc<Mutex<CtrlFanAndCPU>>) -> Self {
+        Self { inner }
+    }
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl DbusFanAndCpu {
+    /// Set profile details
+    fn set_profile(&self, profile: String) {
+        if let Ok(event) = serde_json::from_str(&profile) {
+            if let Ok(mut ctrl) = self.inner.try_lock() {
+                if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
+                    cfg.read();
+                    ctrl.handle_profile_event(&event, &mut cfg)
+                        .unwrap_or_else(|err| warn!("{}", err));
+                    if let Some(profile) = cfg.power_profiles.get(&cfg.active_profile) {
+                        if let Ok(json) = serde_json::to_string(profile) {
+                            self.notify_profile(&json)
+                                .unwrap_or_else(|err| warn!("{}", err));
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    /// Fetch the active profile name
+    fn next_profile(&mut self) {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
+                cfg.read();
+                ctrl.do_next_profile(&mut cfg)
+                    .unwrap_or_else(|err| warn!("{}", err));
+                if let Some(profile) = cfg.power_profiles.get(&cfg.active_profile) {
+                    if let Ok(json) = serde_json::to_string(profile) {
+                        self.notify_profile(&json)
+                            .unwrap_or_else(|err| warn!("{}", err));
+                    }
+                }
+            }
+        }
+    }
+
+    /// Fetch the active profile name
+    fn active_profile_name(&mut self) -> String {
+        if let Ok(ctrl) = self.inner.try_lock() {
+            if let Ok(mut cfg) = ctrl.config.try_lock() {
+                cfg.read();
+                return cfg.active_profile.clone();
+            }
+        }
+        "Failed".to_string()
+    }
+
+    /// Fetch the active profile details
+    fn profile(&mut self) -> String {
+        if let Ok(ctrl) = self.inner.try_lock() {
+            if let Ok(mut cfg) = ctrl.config.try_lock() {
+                cfg.read();
+                if let Some(profile) = cfg.power_profiles.get(&cfg.active_profile) {
+                    if let Ok(json) = serde_json::to_string(profile) {
+                        return json;
+                    }
+                }
+            }
+        }
+        "Failed".to_string()
+    }
+
+    fn profiles(&mut self) -> String {
+        if let Ok(ctrl) = self.inner.try_lock() {
+            if let Ok(mut cfg) = ctrl.config.try_lock() {
+                cfg.read();
+                if let Ok(json) = serde_json::to_string(&cfg.power_profiles) {
+                    return json;
+                }
+            }
+        }
+        "Failed".to_string()
+    }
+
+    #[dbus_interface(signal)]
+    fn notify_profile(&self, profile: &str) -> zbus::Result<()> {}
+}
+
+impl crate::ZbusAdd for DbusFanAndCpu {
+    fn add_to_server(self, server: &mut zbus::ObjectServer) {
+        server
+            .at(&"/org/asuslinux/Profile".try_into().unwrap(), self)
+            .map_err(|err| {
+                warn!("DbusFanAndCpu: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+impl crate::Reloadable for CtrlFanAndCPU {
+    fn reload(&mut self) -> Result<(), RogError> {
+        if let Ok(mut config) = self.config.clone().try_lock() {
+            let profile = config.active_profile.clone();
+            self.set(&profile, &mut config)?;
+            // info!(
+            //     "Reloaded fan mode: {:?}",
+            //     FanLevel::from(config.power_profile)
+            // );
+        }
+        Ok(())
+    }
+}
+
+impl CtrlFanAndCPU {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        let path = CtrlFanAndCPU::get_fan_path()?;
+        info!("Device has thermal throttle control");
+        Ok(CtrlFanAndCPU { path, config })
+    }
+
+    fn get_fan_path() -> Result<&'static str, RogError> {
+        if Path::new(FAN_TYPE_1_PATH).exists() {
+            Ok(FAN_TYPE_1_PATH)
+        } else if Path::new(FAN_TYPE_2_PATH).exists() {
+            Ok(FAN_TYPE_2_PATH)
+        } else {
+            Err(RogError::MissingFunction(
+                "Fan mode not available, you may require a v5.8.10 series kernel or newer".into(),
+            ))
+        }
+    }
+
+    /// Toggle to next profile in list
+    pub(super) fn do_next_profile(&mut self, config: &mut Config) -> Result<(), RogError> {
+        config.read();
+
+        let mut i = config
+            .toggle_profiles
+            .iter()
+            .position(|x| x == &config.active_profile)
+            .map(|i| i + 1)
+            .unwrap_or(0);
+        if i >= config.toggle_profiles.len() {
+            i = 0;
+        }
+
+        let new_profile = config
+            .toggle_profiles
+            .get(i)
+            .unwrap_or(&config.active_profile)
+            .clone();
+
+        self.set(&new_profile, config)?;
+
+        info!("Profile was changed: {}", &new_profile);
+        Ok(())
+    }
+
+    fn set_fan_mode(&mut self, preset: u8, config: &mut Config) -> Result<(), RogError> {
+        let mode = config.active_profile.clone();
+        let mut fan_ctrl = OpenOptions::new()
+            .write(true)
+            .open(self.path)
+            .map_err(|err| RogError::Path(self.path.into(), err))?;
+        config.read();
+        let mut mode_config = config
+            .power_profiles
+            .get_mut(&mode)
+            .ok_or_else(|| RogError::MissingProfile(mode.clone()))?;
+        config.curr_fan_mode = preset;
+        mode_config.fan_preset = preset;
+        config.write();
+        fan_ctrl
+            .write_all(format!("{}\n", preset).as_bytes())
+            .map_err(|err| RogError::Write(self.path.into(), err))?;
+        info!("Fan mode set to: {:?}", FanLevel::from(preset));
+        Ok(())
+    }
+
+    fn handle_profile_event(
+        &mut self,
+        event: &ProfileEvent,
+        config: &mut Config,
+    ) -> Result<(), RogError> {
+        match event {
+            ProfileEvent::Toggle => self.do_next_profile(config)?,
+            ProfileEvent::ChangeMode(mode) => {
+                self.set_fan_mode(*mode, config)?;
+                let mode = config.active_profile.clone();
+                self.set_pstate_for_fan_mode(&mode, config)?;
+                self.set_fan_curve_for_fan_mode(&mode, config)?;
+            }
+            ProfileEvent::Cli(command) => {
+                let profile_key = match command.profile.as_ref() {
+                    Some(k) => k.clone(),
+                    None => config.active_profile.clone(),
+                };
+
+                let mut profile = if command.create {
+                    config
+                        .power_profiles
+                        .entry(profile_key.clone())
+                        .or_insert_with(Profile::default)
+                } else {
+                    config
+                        .power_profiles
+                        .get_mut(&profile_key)
+                        .ok_or_else(|| RogError::MissingProfile(profile_key.clone()))?
+                };
+
+                if command.turbo.is_some() {
+                    profile.turbo = command.turbo.unwrap();
+                }
+                if let Some(min_perc) = command.min_percentage {
+                    profile.min_percentage = min_perc;
+                }
+                if let Some(max_perc) = command.max_percentage {
+                    profile.max_percentage = max_perc;
+                }
+                if let Some(ref preset) = command.fan_preset {
+                    profile.fan_preset = preset.into();
+                }
+                if let Some(ref curve) = command.curve {
+                    profile.fan_curve = Some(curve.clone());
+                }
+
+                self.set(&profile_key, config)?;
+            }
+        }
+        Ok(())
+    }
+
+    fn set(&mut self, profile: &str, config: &mut Config) -> Result<(), RogError> {
+        let mode_config = config
+            .power_profiles
+            .get(profile)
+            .ok_or_else(|| RogError::MissingProfile(profile.into()))?;
+        let mut fan_ctrl = OpenOptions::new()
+            .write(true)
+            .open(self.path)
+            .map_err(|err| RogError::Path(self.path.into(), err))?;
+        config.curr_fan_mode = mode_config.fan_preset;
+        fan_ctrl
+            .write_all(format!("{}\n", mode_config.fan_preset).as_bytes())
+            .map_err(|err| RogError::Write(self.path.into(), err))?;
+
+        self.set_pstate_for_fan_mode(profile, config)?;
+        self.set_fan_curve_for_fan_mode(profile, config)?;
+
+        config.active_profile = profile.into();
+
+        config.write();
+        Ok(())
+    }
+
+    fn set_pstate_for_fan_mode(&self, mode: &str, config: &mut Config) -> Result<(), RogError> {
+        info!("Setting pstate");
+        let mode_config = config
+            .power_profiles
+            .get(mode)
+            .ok_or_else(|| RogError::MissingProfile(mode.into()))?;
+
+        // Set CPU pstate
+        if let Ok(pstate) = intel_pstate::PState::new() {
+            pstate.set_min_perf_pct(mode_config.min_percentage)?;
+            pstate.set_max_perf_pct(mode_config.max_percentage)?;
+            pstate.set_no_turbo(!mode_config.turbo)?;
+            info!(
+                "Intel CPU Power: min: {}%, max: {}%, turbo: {}",
+                mode_config.min_percentage, mode_config.max_percentage, mode_config.turbo
+            );
+        } else {
+            info!("Setting pstate for AMD CPU");
+            // must be AMD CPU
+            let mut file = OpenOptions::new()
+                .write(true)
+                .open(AMD_BOOST_PATH)
+                .map_err(|err| RogError::Path(self.path.into(), err))?;
+
+            let boost = if mode_config.turbo { "1" } else { "0" }; // opposite of Intel
+            file.write_all(boost.as_bytes())
+                .map_err(|err| RogError::Write(AMD_BOOST_PATH.into(), err))?;
+            info!("AMD CPU Turbo: {}", boost);
+        }
+        Ok(())
+    }
+
+    fn set_fan_curve_for_fan_mode(&self, mode: &str, config: &Config) -> Result<(), RogError> {
+        let mode_config = &config
+            .power_profiles
+            .get(mode)
+            .ok_or_else(|| RogError::MissingProfile(mode.into()))?;
+
+        if let Some(ref curve) = mode_config.fan_curve {
+            use rog_fan_curve::{Board, Fan};
+            if let Some(board) = Board::from_board_name() {
+                curve.apply(board, Fan::Cpu)?;
+                curve.apply(board, Fan::Gpu)?;
+            } else {
+                warn!("Fan curve unsupported on this board.")
+            }
+        }
+
+        Ok(())
+    }
+}

daemon/src/ctrl_gfx/error.rs

@@ -0,0 +1,41 @@
+use std::fmt;
+use std::{error, process::ExitStatus};
+
+use crate::error::RogError;
+
+#[derive(Debug)]
+pub enum GfxError {
+    ParseVendor,
+    Bus(String, std::io::Error),
+    DisplayManagerAction(String, ExitStatus),
+    DisplayManagerTimeout(String),
+    GsyncModeActive,
+}
+
+impl fmt::Display for GfxError {
+    // This trait requires `fmt` with this exact signature.
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        match self {
+            GfxError::ParseVendor => write!(f, "Could not parse vendor name"),
+            GfxError::Bus(func, error) => write!(f, "Bus error: {}: {}", func, error),
+            GfxError::DisplayManagerAction(action, status) => {
+                write!(f, "Display-manager action {} failed: {}", action, status)
+            }
+            GfxError::DisplayManagerTimeout(state) => {
+                write!(f, "Timed out waiting for display-manager {} state", state)
+            }
+            GfxError::GsyncModeActive => write!(
+                f,
+                "Can not switch gfx modes when dedicated/G-Sync mode is active"
+            ),
+        }
+    }
+}
+
+impl error::Error for GfxError {}
+
+impl From<GfxError> for RogError {
+    fn from(err: GfxError) -> Self {
+        RogError::GfxSwitching(err)
+    }
+}

daemon/src/ctrl_gfx/gfx.rs

@@ -0,0 +1,540 @@
+use ctrl_gfx::error::GfxError;
+use ctrl_gfx::*;
+use ctrl_rog_bios::CtrlRogBios;
+use log::{error, info, warn};
+use rog_types::gfx_vendors::GfxVendors;
+use session_manager::{are_gfx_sessions_alive, get_sessions};
+use std::{io::Write, ops::Add, path::Path};
+use std::{iter::FromIterator, thread::JoinHandle};
+use std::{process::Command, thread::sleep, time::Duration};
+use std::{str::FromStr, sync::mpsc};
+use std::{sync::Arc, sync::Mutex};
+use sysfs_class::{PciDevice, SysClass};
+use system::{GraphicsDevice, PciBus};
+use zbus::dbus_interface;
+
+use crate::*;
+
+pub struct CtrlGraphics {
+    bus: PciBus,
+    _amd: Vec<GraphicsDevice>,
+    _intel: Vec<GraphicsDevice>,
+    nvidia: Vec<GraphicsDevice>,
+    #[allow(dead_code)]
+    other: Vec<GraphicsDevice>,
+    config: Arc<Mutex<Config>>,
+    thread_kill: Arc<Mutex<Option<mpsc::Sender<bool>>>>,
+}
+
+trait Dbus {
+    fn vendor(&self) -> String;
+    fn power(&self) -> String;
+    fn set_vendor(&mut self, vendor: String);
+    fn notify_gfx(&self, vendor: &str) -> zbus::Result<()>;
+    fn notify_action(&self, action: &str) -> zbus::Result<()>;
+}
+
+use std::convert::TryInto;
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl Dbus for CtrlGraphics {
+    fn vendor(&self) -> String {
+        self.get_gfx_mode()
+            .map(|gfx| gfx.into())
+            .unwrap_or_else(|err| format!("Get vendor failed: {}", err))
+    }
+
+    fn power(&self) -> String {
+        Self::get_runtime_status().unwrap_or_else(|err| format!("Get power status failed: {}", err))
+    }
+
+    fn set_vendor(&mut self, vendor: String) {
+        if let Ok(tmp) = GfxVendors::from_str(&vendor) {
+            info!("GFX: Switching gfx mode to {}", vendor);
+            let msg = self.set_gfx_config(tmp).unwrap_or_else(|err| {
+                error!("GFX: {}", err);
+                format!("Failed: {}", err.to_string())
+            });
+            self.notify_gfx(&vendor)
+                .unwrap_or_else(|err| warn!("GFX: {}", err));
+            self.notify_action(&msg)
+                .unwrap_or_else(|err| warn!("GFX: {}", err));
+        }
+    }
+
+    #[dbus_interface(signal)]
+    fn notify_gfx(&self, vendor: &str) -> zbus::Result<()> {}
+
+    #[dbus_interface(signal)]
+    fn notify_action(&self, action: &str) -> zbus::Result<()> {}
+}
+
+impl ZbusAdd for CtrlGraphics {
+    fn add_to_server(self, server: &mut zbus::ObjectServer) {
+        server
+            .at(
+                &"/org/asuslinux/Gfx"
+                    .try_into()
+                    .expect("Couldn't add to zbus"),
+                self,
+            )
+            .map_err(|err| {
+                warn!("GFX: CtrlGraphics: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+impl Reloadable for CtrlGraphics {
+    fn reload(&mut self) -> Result<(), RogError> {
+        self.auto_power()?;
+        info!("GFX: Reloaded gfx mode: {:?}", self.get_gfx_mode()?);
+        Ok(())
+    }
+}
+
+impl CtrlGraphics {
+    pub fn new(config: Arc<Mutex<Config>>) -> std::io::Result<CtrlGraphics> {
+        let bus = PciBus::new()?;
+
+        info!("GFX: Rescanning PCI bus");
+        bus.rescan()?;
+
+        let devs = PciDevice::all()?;
+
+        let functions = |parent: &PciDevice| -> Vec<PciDevice> {
+            let mut functions = Vec::new();
+            if let Some(parent_slot) = parent.id().split('.').next() {
+                for func in devs.iter() {
+                    if let Some(func_slot) = func.id().split('.').next() {
+                        if func_slot == parent_slot {
+                            info!("GFX: {}: Function for {}", func.id(), parent.id());
+                            functions.push(func.clone());
+                        }
+                    }
+                }
+            }
+            functions
+        };
+
+        let mut amd = Vec::new();
+        let mut intel = Vec::new();
+        let mut nvidia = Vec::new();
+        let mut other = Vec::new();
+        for dev in devs.iter() {
+            let c = dev.class()?;
+            if 0x03 == (c >> 16) & 0xFF {
+                match dev.vendor()? {
+                    0x1002 => {
+                        info!("GFX: {}: AMD graphics", dev.id());
+                        amd.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
+                    }
+                    0x10DE => {
+                        info!("GFX: {}: NVIDIA graphics", dev.id());
+                        nvidia.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
+                    }
+                    0x8086 => {
+                        info!("GFX: {}: Intel graphics", dev.id());
+                        intel.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
+                    }
+                    vendor => {
+                        info!("GFX: {}: Other({:X}) graphics", dev.id(), vendor);
+                        other.push(GraphicsDevice::new(dev.id().to_owned(), functions(&dev)));
+                    }
+                }
+            }
+        }
+
+        Ok(CtrlGraphics {
+            bus,
+            _amd: amd,
+            _intel: intel,
+            nvidia,
+            other,
+            config,
+            thread_kill: Arc::new(Mutex::new(None)),
+        })
+    }
+
+    pub fn bus(&self) -> PciBus {
+        self.bus.clone()
+    }
+
+    pub fn devices(&self) -> Vec<GraphicsDevice> {
+        self.nvidia.clone()
+    }
+
+    fn save_gfx_mode(vendor: GfxVendors, config: Arc<Mutex<Config>>) -> Result<(), RogError> {
+        if let Ok(mut config) = config.lock() {
+            config.gfx_mode = vendor.clone();
+            config.write();
+            return Ok(());
+        }
+        // TODO: Error here
+        Ok(())
+    }
+
+    /// Associated method to get which vendor mode is set
+    pub fn get_gfx_mode(&self) -> Result<GfxVendors, RogError> {
+        if let Ok(config) = self.config.lock() {
+            return Ok(config.gfx_mode.clone());
+        }
+        // TODO: Error here
+        Ok(GfxVendors::Hybrid)
+    }
+
+    fn get_runtime_status() -> Result<String, RogError> {
+        const PATH: &str = "/sys/bus/pci/devices/0000:01:00.0/power/runtime_status";
+        let buf = std::fs::read_to_string(PATH).map_err(|err| RogError::Read(PATH.into(), err))?;
+        Ok(buf)
+    }
+
+    fn toggle_fallback_service(vendor: GfxVendors) -> Result<(), RogError> {
+        let action = if vendor == GfxVendors::Nvidia {
+            info!("GFX: Enabling nvidia-fallback.service");
+            "enable"
+        } else {
+            info!("GFX: Disabling nvidia-fallback.service");
+            "disable"
+        };
+
+        let status = Command::new("systemctl")
+            .arg(action)
+            .arg("nvidia-fallback.service")
+            .status()
+            .map_err(|err| RogError::Command("systemctl".into(), err))?;
+
+        if !status.success() {
+            // Error is ignored in case this service is removed
+            warn!(
+                "systemctl: {} (ignore warning if service does not exist!)",
+                status
+            );
+        }
+
+        Ok(())
+    }
+
+    fn write_xorg_conf(vendor: GfxVendors) -> Result<(), RogError> {
+        let text = if vendor == GfxVendors::Nvidia {
+            [PRIMARY_GPU_BEGIN, PRIMARY_GPU_NVIDIA, PRIMARY_GPU_END].concat()
+        } else {
+            [PRIMARY_GPU_BEGIN, PRIMARY_GPU_END].concat()
+        };
+
+        if !Path::new(XORG_PATH).exists() {
+            std::fs::create_dir(XORG_PATH).map_err(|err| RogError::Write(XORG_PATH.into(), err))?;
+        }
+
+        let file = XORG_PATH.to_string().add(XORG_FILE);
+        info!("GFX: Writing {}", file);
+        let mut file = std::fs::OpenOptions::new()
+            .create(true)
+            .truncate(true)
+            .write(true)
+            .open(&file)
+            .map_err(|err| RogError::Write(file, err))?;
+
+        file.write_all(&text)
+            .and_then(|_| file.sync_all())
+            .map_err(|err| RogError::Write(MODPROBE_PATH.into(), err))?;
+        Ok(())
+    }
+
+    fn write_modprobe_conf() -> Result<(), RogError> {
+        info!("GFX: Writing {}", MODPROBE_PATH);
+
+        let mut file = std::fs::OpenOptions::new()
+            .create(true)
+            .truncate(true)
+            .write(true)
+            .open(MODPROBE_PATH)
+            .map_err(|err| RogError::Path(MODPROBE_PATH.into(), err))?;
+
+        file.write_all(MODPROBE_BASE)
+            .and_then(|_| file.sync_all())
+            .map_err(|err| RogError::Write(MODPROBE_PATH.into(), err))?;
+
+        Ok(())
+    }
+
+    fn unbind_remove_nvidia(devices: &[GraphicsDevice]) -> Result<(), RogError> {
+        // Unbind NVIDIA graphics devices and their functions
+        let unbinds = devices.iter().map(|dev| dev.unbind());
+
+        // Remove NVIDIA graphics devices and their functions
+        let removes = devices.iter().map(|dev| dev.remove());
+
+        Result::from_iter(unbinds.chain(removes))
+            .map_err(|err| RogError::Command("device unbind error".into(), err))?;
+
+        Ok(())
+    }
+
+    fn log_uses_of_nvidia() {
+        // lsof /dev/nvidia*
+        let mut cmd = Command::new("lsof");
+        cmd.arg("/dev/nvidia*");
+
+        match cmd.output() {
+            Ok(output) => {
+                if !output.status.success() {
+                    error!(
+                        "Failed to list uses of nvidia devices: {}",
+                        String::from_utf8_lossy(&output.stderr)
+                    );
+                } else if output.status.success() {
+                    warn!("GFX: {}", String::from_utf8_lossy(&output.stdout));
+                }
+            }
+            Err(err) => error!("GFX: Failed to list uses of nvidia devices: {}", err),
+        }
+    }
+
+    fn do_driver_action(driver: &str, action: &str) -> Result<(), RogError> {
+        let mut cmd = Command::new(action);
+        cmd.arg(driver);
+
+        let mut count = 0;
+        const MAX_TRIES: i32 = 6;
+        loop {
+            if count > MAX_TRIES {
+                let msg = format!("{} {} failed for unknown reason", action, driver);
+                error!("GFX: {}", msg);
+                return Ok(()); //Err(RogError::Modprobe(msg));
+            }
+
+            let output = cmd
+                .output()
+                .map_err(|err| RogError::Command(format!("{:?}", cmd), err))?;
+            if !output.status.success() {
+                if output
+                    .stderr
+                    .ends_with("is not currently loaded\n".as_bytes())
+                {
+                    return Ok(());
+                }
+                if output.stderr.ends_with("Permission denied\n".as_bytes()) {
+                    let msg = format!(
+                        "{} {} failed: {:?}",
+                        action,
+                        driver,
+                        String::from_utf8_lossy(&output.stderr)
+                    );
+                    warn!("GFX: {}", msg);
+                    warn!("GFX: It may be safe to ignore the above error, run `lsmod |grep nvidia` to confirm modules loaded");
+                    return Ok(());
+                }
+                if count >= MAX_TRIES {
+                    let msg = format!(
+                        "{} {} failed: {:?}",
+                        action,
+                        driver,
+                        String::from_utf8_lossy(&output.stderr)
+                    );
+                    return Err(RogError::Modprobe(msg));
+                }
+            } else if output.status.success() {
+                return Ok(());
+            }
+
+            count += 1;
+            std::thread::sleep(std::time::Duration::from_millis(250));
+        }
+    }
+
+    fn do_display_manager_action(action: &str) -> Result<(), RogError> {
+        let mut cmd = Command::new("systemctl");
+        cmd.arg(action);
+        cmd.arg(DISPLAY_MANAGER);
+
+        let status = cmd
+            .status()
+            .map_err(|err| RogError::Command(format!("{:?}", cmd), err))?;
+        if !status.success() {
+            let msg = format!(
+                "systemctl {} {} failed: {:?}",
+                action, DISPLAY_MANAGER, status
+            );
+            return Err(GfxError::DisplayManagerAction(msg, status).into());
+        }
+        Ok(())
+    }
+
+    fn wait_display_manager_state(state: &str) -> Result<(), RogError> {
+        let mut cmd = Command::new("systemctl");
+        cmd.arg("is-active");
+        cmd.arg(DISPLAY_MANAGER);
+
+        let mut count = 0;
+
+        while count <= 5 {
+            let output = cmd
+                .output()
+                .map_err(|err| RogError::Command(format!("{:?}", cmd), err))?;
+            if output.stdout.starts_with(state.as_bytes()) {
+                return Ok(());
+            }
+            std::thread::sleep(std::time::Duration::from_millis(500));
+            count += 1;
+        }
+        return Err(GfxError::DisplayManagerTimeout(state.into()).into());
+    }
+
+    pub fn do_vendor_tasks(
+        vendor: GfxVendors,
+        devices: &[GraphicsDevice],
+        bus: &PciBus,
+    ) -> Result<(), RogError> {
+        Self::write_xorg_conf(vendor)?;
+        Self::write_modprobe_conf()?; // TODO: Not required here, should put in startup?
+
+        // Rescan before doing remove or add drivers
+        bus.rescan()
+            .map_err(|err| GfxError::Bus("bus rescan error".into(), err))?;
+
+        match vendor {
+            GfxVendors::Nvidia | GfxVendors::Hybrid | GfxVendors::Compute => {
+                for driver in NVIDIA_DRIVERS.iter() {
+                    Self::do_driver_action(driver, "modprobe").map_err(|err| {
+                        Self::log_uses_of_nvidia();
+                        err
+                    })?;
+                }
+            }
+            // TODO: compute mode, needs different setup
+            // GfxVendors::Compute => {}
+            GfxVendors::Integrated => {
+                for driver in NVIDIA_DRIVERS.iter() {
+                    Self::do_driver_action(driver, "rmmod")?;
+                }
+                Self::unbind_remove_nvidia(&devices)?;
+            }
+        }
+
+        Ok(())
+    }
+
+    /// Spools until all user sessions are ended
+    fn fire_starter(
+        vendor: GfxVendors,
+        devices: Vec<GraphicsDevice>,
+        bus: PciBus,
+        sessions: Vec<session_manager::Session>,
+        killer: mpsc::Receiver<bool>,
+    ) -> Result<String, RogError> {
+        info!("GFX: display-manager thread started");
+        while are_gfx_sessions_alive(&sessions) {
+            if let Ok(stop) = killer.try_recv() {
+                if stop {
+                    return Ok("Graphics mode change was cancelled".into());
+                }
+            }
+            sleep(Duration::from_millis(300));
+        }
+        info!("GFX: all graphical user sessions ended, continuing");
+        Self::do_display_manager_action("stop")?;
+
+        match Self::wait_display_manager_state("inactive") {
+            Ok(_) => info!("GFX: display-manager stopped"),
+            Err(err) => {
+                warn!("GFX: {}", err);
+                warn!("GFX: Retry stop display manager");
+                Self::do_display_manager_action("stop")?;
+                Self::wait_display_manager_state("inactive")?;
+            }
+        }
+
+        Self::do_vendor_tasks(vendor, &devices, &bus)?;
+        Self::do_display_manager_action("start")?;
+
+        if Self::wait_display_manager_state("active").is_err() {
+            error!("GFX: display-manager failed to start normally, attempting restart");
+            Self::do_display_manager_action("restart")?;
+            Self::wait_display_manager_state("active")?;
+        }
+        info!("GFX: display-manager started");
+
+        let v: &str = vendor.into();
+        info!("GFX: Graphics mode changed to {} successfully", v);
+        Ok(format!("Graphics mode changed to {} successfully", v))
+    }
+
+    /// For manually calling (not on boot/startup)
+    ///
+    /// Will stop and start display manager without warning
+    pub fn set_gfx_config(&mut self, vendor: GfxVendors) -> Result<String, RogError> {
+        if let Ok(gsync) = CtrlRogBios::get_gfx_mode() {
+            if gsync == 1 {
+                return Err(GfxError::GsyncModeActive.into());
+            }
+        }
+
+        if let Ok(lock) = self.thread_kill.lock() {
+            if let Some(tx) = lock.as_ref() {
+                // Cancel the running thread
+                info!("GFX: Cancelling previous thread");
+                tx.send(true)
+                    .map_err(|err| {
+                        warn!("GFX: {}", err);
+                    })
+                    .ok();
+            }
+        }
+
+        let devices = self.nvidia.clone();
+        let bus = self.bus.clone();
+        let sessions = get_sessions().unwrap();
+        let (tx, rx) = mpsc::channel();
+        if let Ok(mut lock) = self.thread_kill.lock() {
+            *lock = Some(tx);
+        }
+        let killer = self.thread_kill.clone();
+
+        // Save selected mode in case of reboot
+        Self::save_gfx_mode(vendor, self.config.clone())?;
+
+        let _join: JoinHandle<()> = std::thread::spawn(move || {
+            Self::fire_starter(vendor, devices, bus, sessions, rx)
+                .map_err(|err| {
+                    error!("GFX: {}", err);
+                })
+                .ok();
+            // clear the tx/rx when done
+            if let Ok(mut lock) = killer.try_lock() {
+                *lock = None;
+            }
+            return;
+        });
+
+        // TODO: undo if failed? Save last mode, catch errors...
+        let v: &str = vendor.into();
+        Ok(format!("Graphics mode changed to {} successfully", v))
+    }
+
+    // if CtrlRogBios::has_dedicated_gfx_toggle() {
+    //     if let Ok(config) = self.config.clone().try_lock() {
+    //         // Switch to dedicated if config says to do so
+    //         if config.gfx_nv_mode_is_dedicated && vendor == GfxVendors::Nvidia {
+    //             CtrlRogBios::set_gfx_mode(true)
+    //                 .unwrap_or_else(|err| warn!("GFX: Gfx controller: {}", err));
+    //         } else if let Ok(ded) = CtrlRogBios::get_gfx_mode() {
+    //             // otherwise if switching to non-Nvidia mode turn off dedicated mode
+    //             if ded == 1 && vendor != GfxVendors::Nvidia {
+    //                 CtrlRogBios::set_gfx_mode(false)
+    //                     .unwrap_or_else(|err| warn!("GFX: Gfx controller: {}", err));
+    //             }
+    //         }
+    //     }
+    // }
+
+    fn auto_power(&mut self) -> Result<(), RogError> {
+        let vendor = self.get_gfx_mode()?;
+        let devices = self.nvidia.clone();
+        let bus = self.bus.clone();
+        Self::do_vendor_tasks(vendor, &devices, &bus)?;
+        Self::toggle_fallback_service(vendor)?;
+        Ok(())
+    }
+}

daemon/src/ctrl_gfx/mod.rs

@@ -0,0 +1,39 @@
+pub mod error;
+
+pub mod gfx;
+
+pub mod system;
+
+const NVIDIA_DRIVERS: [&str; 4] = ["nvidia_drm", "nvidia_modeset", "nvidia_uvm", "nvidia"];
+
+const DISPLAY_MANAGER: &str = "display-manager.service";
+
+const MODPROBE_PATH: &str = "/etc/modprobe.d/asusd.conf";
+
+static MODPROBE_BASE: &[u8] = br#"# Automatically generated by asusd
+# If you have issues with i2c_nvidia_gpu, copy the 2 lines below to a
+# new blacklist file and uncomment
+#blacklist i2c_nvidia_gpu
+#alias i2c_nvidia_gpu off
+blacklist nouveau
+alias nouveau off
+options nvidia NVreg_DynamicPowerManagement=0x02
+options nvidia-drm modeset=1
+"#;
+
+const XORG_FILE: &str = "90-nvidia-primary.conf";
+const XORG_PATH: &str = "/etc/X11/xorg.conf.d/";
+
+static PRIMARY_GPU_BEGIN: &[u8] = br#"# Automatically generated by asusd
+Section "OutputClass"
+    Identifier "nvidia"
+    MatchDriver "nvidia-drm"
+    Driver "nvidia"
+    Option "AllowEmptyInitialConfiguration"
+    Option "AllowExternalGpus""#;
+
+static PRIMARY_GPU_NVIDIA: &[u8] = br#"
+    Option "PrimaryGPU" "true""#;
+
+static PRIMARY_GPU_END: &[u8] = br#"
+EndSection"#;

daemon/src/ctrl_gfx/system.rs

@@ -0,0 +1,156 @@
+use log::{error, info, warn};
+use std::fs::read_to_string;
+use std::{fs::write, io, path::PathBuf};
+use sysfs_class::{PciDevice, SysClass};
+
+pub struct Module {
+    pub name: String,
+}
+
+impl Module {
+    fn parse(line: &str) -> io::Result<Module> {
+        let mut parts = line.split(' ');
+
+        let name = parts
+            .next()
+            .ok_or_else(|| io::Error::new(io::ErrorKind::InvalidData, "module name not found"))?;
+
+        Ok(Module {
+            name: name.to_string(),
+        })
+    }
+
+    pub fn all() -> io::Result<Vec<Module>> {
+        let mut modules = Vec::new();
+
+        let data = read_to_string("/proc/modules")?;
+        for line in data.lines() {
+            let module = Module::parse(line)?;
+            modules.push(module);
+        }
+
+        Ok(modules)
+    }
+}
+
+#[derive(Clone)]
+pub struct PciBus {
+    path: PathBuf,
+}
+
+impl PciBus {
+    pub fn new() -> io::Result<PciBus> {
+        let path = PathBuf::from("/sys/bus/pci");
+        if path.is_dir() {
+            Ok(PciBus { path })
+        } else {
+            Err(io::Error::new(
+                io::ErrorKind::NotFound,
+                "pci directory not found",
+            ))
+        }
+    }
+
+    /// Will rescan the device tree, which adds all removed devices back
+    pub fn rescan(&self) -> io::Result<()> {
+        write(self.path.join("rescan"), "1")
+    }
+}
+
+#[derive(Clone)]
+pub struct GraphicsDevice {
+    _id: String,
+    functions: Vec<PciDevice>,
+}
+
+impl GraphicsDevice {
+    pub fn new(id: String, functions: Vec<PciDevice>) -> GraphicsDevice {
+        GraphicsDevice { _id: id, functions }
+    }
+
+    pub fn exists(&self) -> bool {
+        self.functions.iter().any(|func| func.path().exists())
+    }
+
+    pub fn unbind(&self) -> Result<(), std::io::Error> {
+        for func in self.functions.iter() {
+            if func.path().exists() {
+                match func.driver() {
+                    Ok(driver) => {
+                        info!("{}: Unbinding {}", driver.id(), func.id());
+                        unsafe {
+                            driver.unbind(&func).map_err(|err| {
+                                error!("gfx unbind: {}", err);
+                                err
+                            })?;
+                        }
+                    }
+                    Err(err) => match err.kind() {
+                        io::ErrorKind::NotFound => (),
+                        _ => {
+                            error!("gfx driver: {:?}, {}", func.path(), err);
+                            return Err(err);
+                        }
+                    },
+                }
+            }
+        }
+        Ok(())
+    }
+
+    pub fn rebind(&self) -> Result<(), std::io::Error> {
+        for func in self.functions.iter() {
+            if func.path().exists() {
+                match func.driver() {
+                    Ok(driver) => {
+                        info!("{}: Binding {}", driver.id(), func.id());
+                        unsafe {
+                            driver.bind(&func).map_err(|err| {
+                                error!("gfx bind: {}", err);
+                                err
+                            })?;
+                        }
+                    }
+                    Err(err) => match err.kind() {
+                        io::ErrorKind::NotFound => (),
+                        _ => {
+                            error!("gfx driver: {:?}, {}", func.path(), err);
+                            return Err(err);
+                        }
+                    },
+                }
+            }
+        }
+        Ok(())
+    }
+
+    pub fn remove(&self) -> Result<(), std::io::Error> {
+        for func in self.functions.iter() {
+            if func.path().exists() {
+                match func.driver() {
+                    Ok(driver) => {
+                        error!("{}: in use by {}", func.id(), driver.id());
+                    }
+                    Err(why) => match why.kind() {
+                        std::io::ErrorKind::NotFound => {
+                            info!("{}: Removing", func.id());
+                            unsafe {
+                                // ignore errors and carry on
+                                if let Err(err) = func.remove() {
+                                    error!("gfx remove: {}", err);
+                                }
+                            }
+                        }
+                        _ => {
+                            error!("Remove device failed");
+                        }
+                    },
+                }
+            } else {
+                warn!("{}: Already removed", func.id());
+            }
+        }
+        info!("Removed all gfx devices");
+        Ok(())
+    }
+}

daemon/src/ctrl_leds.rs

@@ -0,0 +1,569 @@
+// Only these two packets must be 17 bytes
+static LED_APPLY: [u8; 17] = [0x5d, 0xb4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
+static LED_SET: [u8; 17] = [0x5d, 0xb5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0];
+
+static KBD_BRIGHT_PATH: &str = "/sys/class/leds/asus::kbd_backlight/brightness";
+
+use crate::{
+    config::Config,
+    error::RogError,
+    laptops::{match_laptop, HELP_ADDRESS},
+};
+use log::{error, info, warn};
+use rog_types::{
+    aura_brightness_bytes,
+    aura_modes::{AuraModes, PER_KEY},
+    fancy::KeyColourArray,
+    LED_MSG_LEN,
+};
+use std::fs::OpenOptions;
+use std::io::{Read, Write};
+use std::sync::Arc;
+use std::sync::Mutex;
+use std::{convert::TryInto, path::Path};
+use zbus::dbus_interface;
+
+use crate::GetSupported;
+
+use serde_derive::{Deserialize, Serialize};
+#[derive(Serialize, Deserialize)]
+pub struct LedSupportedFunctions {
+    pub brightness_set: bool,
+    pub stock_led_modes: Option<Vec<u8>>,
+    pub per_key_led_mode: bool,
+}
+
+impl GetSupported for CtrlKbdBacklight {
+    type A = LedSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        // let mode = <&str>::from(&<AuraModes>::from(*mode));
+        let mut stock_led_modes = None;
+        let mut per_key_led_mode = false;
+        if let Some(laptop) = match_laptop() {
+            let modes = laptop.supported_modes().to_vec();
+            if modes.contains(&PER_KEY) {
+                per_key_led_mode = true;
+                let modes = modes.iter().filter(|x| **x != PER_KEY).copied().collect();
+                stock_led_modes = Some(modes);
+            } else {
+                stock_led_modes = Some(modes);
+            }
+        }
+
+        LedSupportedFunctions {
+            brightness_set: CtrlKbdBacklight::get_kbd_bright_path().is_ok(),
+            stock_led_modes,
+            per_key_led_mode,
+        }
+    }
+}
+
+pub struct CtrlKbdBacklight {
+    led_node: Option<String>,
+    #[allow(dead_code)]
+    kbd_node: Option<String>,
+    pub bright_node: String,
+    supported_modes: Vec<u8>,
+    flip_effect_write: bool,
+    config: Arc<Mutex<Config>>,
+}
+
+pub struct DbusKbdBacklight {
+    inner: Arc<Mutex<CtrlKbdBacklight>>,
+}
+
+impl DbusKbdBacklight {
+    pub fn new(inner: Arc<Mutex<CtrlKbdBacklight>>) -> Self {
+        Self { inner }
+    }
+}
+
+trait Dbus {
+    fn set_led(&mut self, data: String);
+    fn ledmode(&self) -> String;
+    fn notify_led(&self, data: &str) -> zbus::Result<()>;
+}
+
+impl crate::ZbusAdd for DbusKbdBacklight {
+    fn add_to_server(self, server: &mut zbus::ObjectServer) {
+        server
+            .at(&"/org/asuslinux/Led".try_into().unwrap(), self)
+            .map_err(|err| {
+                error!("DbusKbdBacklight: add_to_server {}", err);
+            })
+            .ok();
+    }
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl DbusKbdBacklight {
+    fn set_led_mode(&mut self, data: String) {
+        if let Ok(data) = serde_json::from_str(&data) {
+            if let Ok(mut ctrl) = self.inner.try_lock() {
+                if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
+                    match &data {
+                        AuraModes::PerKey(_) => {
+                            ctrl.do_command(data, &mut cfg)
+                                .unwrap_or_else(|err| warn!("{}", err));
+                        }
+                        _ => {
+                            if let Ok(json) = serde_json::to_string(&data) {
+                                match ctrl.do_command(data, &mut cfg) {
+                                    Ok(_) => {
+                                        self.notify_led(&json).ok();
+                                    }
+                                    Err(err) => {
+                                        warn!("{}", err);
+                                    }
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        } else {
+            warn!("SetKeyBacklight could not deserialise");
+        }
+    }
+
+    fn next_led_mode(&self) {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
+                ctrl.toggle_mode(false, &mut cfg)
+                    .unwrap_or_else(|err| warn!("{}", err));
+
+                if let Some(mode) = cfg.get_led_mode_data(cfg.kbd_backlight_mode) {
+                    if let Ok(json) = serde_json::to_string(&mode) {
+                        self.notify_led(&json)
+                            .unwrap_or_else(|err| warn!("{}", err));
+                    }
+                }
+            }
+        }
+    }
+
+    fn prev_led_mode(&self) {
+        if let Ok(mut ctrl) = self.inner.try_lock() {
+            if let Ok(mut cfg) = ctrl.config.clone().try_lock() {
+                ctrl.toggle_mode(true, &mut cfg)
+                    .unwrap_or_else(|err| warn!("{}", err));
+
+                if let Some(mode) = cfg.get_led_mode_data(cfg.kbd_backlight_mode) {
+                    if let Ok(json) = serde_json::to_string(&mode) {
+                        self.notify_led(&json)
+                            .unwrap_or_else(|err| warn!("{}", err));
+                    }
+                }
+            }
+        }
+    }
+
+    /// Return the current mode data
+    fn led_mode(&self) -> String {
+        if let Ok(ctrl) = self.inner.try_lock() {
+            if let Ok(cfg) = ctrl.config.clone().try_lock() {
+                if let Some(mode) = cfg.get_led_mode_data(cfg.kbd_backlight_mode) {
+                    if let Ok(json) = serde_json::to_string(&mode) {
+                        return json;
+                    }
+                }
+            }
+        }
+        warn!("SetKeyBacklight could not deserialise");
+        "SetKeyBacklight could not deserialise".to_string()
+    }
+
+    /// Return a list of available modes
+    fn led_modes(&self) -> String {
+        if let Ok(ctrl) = self.inner.try_lock() {
+            if let Ok(cfg) = ctrl.config.clone().try_lock() {
+                if let Ok(json) = serde_json::to_string(&cfg.kbd_backlight_modes) {
+                    return json;
+                }
+            }
+        }
+        warn!("SetKeyBacklight could not deserialise");
+        "SetKeyBacklight could not deserialise".to_string()
+    }
+
+    /// Return the current LED brightness
+    fn led_brightness(&self) -> i8 {
+        if let Ok(ctrl) = self.inner.try_lock() {
+            if let Ok(cfg) = ctrl.config.clone().try_lock() {
+                return cfg.kbd_led_brightness as i8;
+            }
+        }
+        warn!("SetKeyBacklight could not deserialise");
+        -1
+    }
+
+    #[dbus_interface(signal)]
+    fn notify_led(&self, data: &str) -> zbus::Result<()>;
+}
+
+impl crate::Reloadable for CtrlKbdBacklight {
+    fn reload(&mut self) -> Result<(), RogError> {
+        // set current mode (if any)
+        if let Ok(mut config) = self.config.clone().try_lock() {
+            if self.supported_modes.len() > 1 {
+                if self.supported_modes.contains(&config.kbd_backlight_mode) {
+                    let mode = config
+                        .get_led_mode_data(config.kbd_backlight_mode)
+                        .ok_or(RogError::NotSupported)?
+                        .to_owned();
+                    self.write_mode(&mode)?;
+                    info!("Reloaded last used mode");
+                } else {
+                    warn!(
+                        "An unsupported mode was set: {}, reset to first mode available",
+                        <&str>::from(&<AuraModes>::from(config.kbd_backlight_mode))
+                    );
+                    for (idx, mode) in config.kbd_backlight_modes.iter_mut().enumerate() {
+                        if !self.supported_modes.contains(&mode.into()) {
+                            config.kbd_backlight_modes.remove(idx);
+                            config.write();
+                            break;
+                        }
+                    }
+                    config.kbd_backlight_mode = self.supported_modes[0];
+                    // TODO: do a recursive call with a boxed dyn future later
+                    let mode = config
+                        .get_led_mode_data(config.kbd_backlight_mode)
+                        .ok_or(RogError::NotSupported)?
+                        .to_owned();
+                    self.write_mode(&mode)?;
+                    info!("Reloaded last used mode");
+                }
+            }
+
+            // Reload brightness
+            let bright = config.kbd_led_brightness;
+            let bytes = aura_brightness_bytes(bright);
+            self.write_bytes(&bytes)?;
+            info!("Reloaded last used brightness");
+        }
+        Ok(())
+    }
+}
+
+impl crate::CtrlTask for CtrlKbdBacklight {
+    fn do_task(&mut self) -> Result<(), RogError> {
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(&self.bright_node)
+            .map_err(|err| match err.kind() {
+                std::io::ErrorKind::NotFound => {
+                    RogError::MissingLedBrightNode((&self.bright_node).into(), err)
+                }
+                _ => RogError::Path((&self.bright_node).into(), err),
+            })?;
+        let mut buf = [0u8; 1];
+        file.read_exact(&mut buf)
+            .map_err(|err| RogError::Read("buffer".into(), err))?;
+        if let Some(num) = char::from(buf[0]).to_digit(10) {
+            if let Ok(mut config) = self.config.clone().try_lock() {
+                if config.kbd_led_brightness != num as u8 {
+                    config.read();
+                    config.kbd_led_brightness = num as u8;
+                    config.write();
+                }
+            }
+            return Ok(());
+        }
+        Err(RogError::ParseLED)
+    }
+}
+
+impl CtrlKbdBacklight {
+    #[inline]
+    pub fn new(
+        id_product: &str,
+        condev_iface: Option<&String>,
+        supported_modes: Vec<u8>,
+        config: Arc<Mutex<Config>>,
+    ) -> Result<Self, RogError> {
+        // TODO: return error if *all* nodes are None
+        let led_node = Self::get_node_failover(id_product, None, Self::scan_led_node).map_or_else(
+            |err| {
+                warn!("led_node: {}", err);
+                None
+            },
+            Some,
+        );
+
+        let kbd_node = Self::get_node_failover(id_product, condev_iface, Self::scan_kbd_node)
+            .map_or_else(
+                |err| {
+                    warn!("kbd_node: {}", err);
+                    None
+                },
+                Some,
+            );
+
+        let bright_node = Self::get_kbd_bright_path();
+
+        if led_node.is_none() && kbd_node.is_none() && Self::get_kbd_bright_path().is_err() {
+            return Err(RogError::MissingFunction(
+                "All keyboard features missing, you may require a v5.11 series kernel or newer"
+                    .into(),
+            ));
+        }
+
+        let ctrl = CtrlKbdBacklight {
+            // Using `ok` here so we can continue without keyboard features but
+            // still get brightness control at least... maybe...
+            led_node,
+            kbd_node,
+            // TODO: Check for existance
+            bright_node: bright_node?.to_owned(),
+            supported_modes,
+            flip_effect_write: false,
+            config,
+        };
+        Ok(ctrl)
+    }
+
+    fn get_kbd_bright_path() -> Result<&'static str, RogError> {
+        if Path::new(KBD_BRIGHT_PATH).exists() {
+            Ok(KBD_BRIGHT_PATH)
+        } else {
+            Err(RogError::MissingFunction(
+                "Keyboard features missing, you may require a v5.11 series kernel or newer".into(),
+            ))
+        }
+    }
+
+    fn get_node_failover(
+        id_product: &str,
+        iface: Option<&String>,
+        fun: fn(&str, Option<&String>) -> Result<String, RogError>,
+    ) -> Result<String, RogError> {
+        match fun(id_product, iface) {
+            Ok(o) => return Ok(o),
+            Err(e) => {
+                warn!("Looking for node: {}", e.to_string());
+            }
+        }
+        Err(RogError::NotFound(format!("{}, {:?}", id_product, iface)))
+    }
+
+    fn scan_led_node(id_product: &str, _: Option<&String>) -> Result<String, RogError> {
+        let mut enumerator = udev::Enumerator::new().map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("enumerator failed".into(), err)
+        })?;
+        enumerator.match_subsystem("hidraw").map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("match_subsystem failed".into(), err)
+        })?;
+
+        for device in enumerator.scan_devices().map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("scan_devices failed".into(), err)
+        })? {
+            if let Some(parent) = device
+                .parent_with_subsystem_devtype("usb", "usb_device")
+                .map_err(|err| {
+                    warn!("{}", err);
+                    RogError::Udev("parent_with_subsystem_devtype failed".into(), err)
+                })?
+            {
+                if parent
+                    .attribute_value("idProduct")
+                    .ok_or_else(|| RogError::NotFound("LED idProduct".into()))?
+                    == id_product
+                {
+                    if let Some(dev_node) = device.devnode() {
+                        info!("Using device at: {:?} for LED control", dev_node);
+                        return Ok(dev_node.to_string_lossy().to_string());
+                    }
+                }
+            }
+        }
+        warn!("Did not find a hidraw node for LED control, your device may be unsupported or require a kernel patch, see: {}", HELP_ADDRESS);
+        Err(RogError::MissingFunction(
+            "ASUS LED device node not found".into(),
+        ))
+    }
+
+    fn scan_kbd_node(id_product: &str, iface: Option<&String>) -> Result<String, RogError> {
+        let mut enumerator = udev::Enumerator::new().map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("enumerator failed".into(), err)
+        })?;
+        enumerator.match_subsystem("input").map_err(|err| {
+            warn!("{}", err);
+            RogError::Udev("match_subsystem failed".into(), err)
+        })?;
+        enumerator
+            .match_property("ID_MODEL_ID", id_product)
+            .map_err(|err| {
+                warn!("{}", err);
+                RogError::Udev("match_property failed".into(), err)
+            })?;
+
+        for device in enumerator
+            .scan_devices()
+            .map_err(|err| {
+                warn!("{}", err);
+                err
+            })
+            .map_err(|err| {
+                warn!("{}", err);
+                RogError::Udev("scan_devices failed".into(), err)
+            })?
+        {
+            if let Some(dev_node) = device.devnode() {
+                if let Some(inum) = device.property_value("ID_USB_INTERFACE_NUM") {
+                    if let Some(iface) = iface {
+                        if inum == iface.as_str() {
+                            info!("Using device at: {:?} for keyboard polling", dev_node);
+                            return Ok(dev_node.to_string_lossy().to_string());
+                        }
+                    }
+                }
+            }
+        }
+
+        warn!("Did not find keyboard consumer device node, if expected functions are missing please file an issue at {}", HELP_ADDRESS);
+        Err(RogError::MissingFunction(
+            "ASUS keyboard 'Consumer Device' node not found".into(),
+        ))
+    }
+
+    pub fn do_command(&mut self, mode: AuraModes, config: &mut Config) -> Result<(), RogError> {
+        self.set_and_save(mode, config)
+    }
+
+    /// Should only be used if the bytes you are writing are verified correct
+    #[inline]
+    fn write_bytes(&self, message: &[u8]) -> Result<(), RogError> {
+        if let Some(led_node) = &self.led_node {
+            if let Ok(mut file) = OpenOptions::new().write(true).open(led_node) {
+                // println!("write: {:02x?}", &message);
+                return file
+                    .write_all(message)
+                    .map_err(|err| RogError::Write("write_bytes".into(), err));
+            }
+        }
+        Err(RogError::NotSupported)
+    }
+
+    /// Write an effect block
+    #[inline]
+    fn write_effect(&mut self, effect: &[Vec<u8>]) -> Result<(), RogError> {
+        if self.flip_effect_write {
+            for row in effect.iter().rev() {
+                self.write_bytes(row)?;
+            }
+        } else {
+            for row in effect.iter() {
+                self.write_bytes(row)?;
+            }
+        }
+        self.flip_effect_write = !self.flip_effect_write;
+        Ok(())
+    }
+
+    /// Used to set a builtin mode and save the settings for it
+    ///
+    /// This needs to be universal so that settings applied by dbus stick
+    #[inline]
+    fn set_and_save(&mut self, mode: AuraModes, config: &mut Config) -> Result<(), RogError> {
+        match mode {
+            AuraModes::LedBrightness(n) => {
+                let bytes: [u8; LED_MSG_LEN] = (&mode).into();
+                self.write_bytes(&bytes)?;
+                config.read();
+                config.kbd_led_brightness = n;
+                config.write();
+                info!("LED brightness set to {:#?}", n);
+            }
+            AuraModes::PerKey(v) => {
+                if v.is_empty() || v[0].is_empty() {
+                    let bytes = KeyColourArray::get_init_msg();
+                    self.write_bytes(&bytes)?;
+                } else {
+                    self.write_effect(&v)?;
+                }
+            }
+            _ => {
+                config.read();
+                let mode_num: u8 = u8::from(&mode);
+                self.write_mode(&mode)?;
+                config.kbd_backlight_mode = mode_num;
+                config.set_mode_data(mode);
+                config.write();
+            }
+        }
+        Ok(())
+    }
+
+    #[inline]
+    fn toggle_mode(&mut self, reverse: bool, config: &mut Config) -> Result<(), RogError> {
+        let current = config.kbd_backlight_mode;
+        if let Some(idx) = self.supported_modes.iter().position(|v| *v == current) {
+            let mut idx = idx;
+            // goes past end of array
+            if reverse {
+                if idx == 0 {
+                    idx = self.supported_modes.len() - 1;
+                } else {
+                    idx -= 1;
+                }
+            } else {
+                idx += 1;
+                if idx == self.supported_modes.len() {
+                    idx = 0;
+                }
+            }
+            let next = self.supported_modes[idx];
+
+            config.read();
+            if let Some(data) = config.get_led_mode_data(next) {
+                self.write_mode(&data)?;
+                config.kbd_backlight_mode = next;
+            }
+            config.write();
+        }
+
+        Ok(())
+    }
+
+    #[inline]
+    fn write_mode(&mut self, mode: &AuraModes) -> Result<(), RogError> {
+        let mode_num: u8 = u8::from(mode);
+        if !self.supported_modes.contains(&mode_num) {
+            return Err(RogError::NotSupported);
+        }
+        match mode {
+            AuraModes::PerKey(v) => {
+                if v.is_empty() || v[0].is_empty() {
+                    let bytes = KeyColourArray::get_init_msg();
+                    self.write_bytes(&bytes)?;
+                } else {
+                    self.write_effect(v)?;
+                }
+            }
+            AuraModes::MultiStatic(_) | AuraModes::MultiBreathe(_) => {
+                let bytes: [[u8; LED_MSG_LEN]; 4] = mode.into();
+                for array in bytes.iter() {
+                    self.write_bytes(array)?;
+                }
+                self.write_bytes(&LED_SET)?;
+                // Changes won't persist unless apply is set
+                self.write_bytes(&LED_APPLY)?;
+                return Ok(());
+            }
+            _ => {
+                let bytes: [u8; LED_MSG_LEN] = mode.into();
+                self.write_bytes(&bytes)?;
+                self.write_bytes(&LED_SET)?;
+                // Changes won't persist unless apply is set
+                self.write_bytes(&LED_APPLY)?;
+            }
+        }
+        Ok(())
+    }
+}

daemon/src/ctrl_rog_bios.rs

@@ -0,0 +1,344 @@
+use crate::{config::Config, error::RogError, GetSupported};
+use log::{error, info, warn};
+use serde_derive::{Deserialize, Serialize};
+use std::fs::OpenOptions;
+use std::io::{Read, Write};
+use std::path::Path;
+use std::process::Command;
+use std::sync::Arc;
+use std::sync::Mutex;
+use std::{convert::TryInto, io::BufRead};
+use zbus::dbus_interface;
+
+const INITRAMFS_PATH: &str = "/usr/sbin/update-initramfs";
+const DRACUT_PATH: &str = "/usr/bin/dracut";
+
+static ASUS_SWITCH_GRAPHIC_MODE: &str =
+    "/sys/firmware/efi/efivars/AsusSwitchGraphicMode-607005d5-3f75-4b2e-98f0-85ba66797a3e";
+static ASUS_POST_LOGO_SOUND: &str =
+    "/sys/firmware/efi/efivars/AsusPostLogoSound-607005d5-3f75-4b2e-98f0-85ba66797a3e";
+
+pub struct CtrlRogBios {
+    _config: Arc<Mutex<Config>>,
+}
+
+#[derive(Serialize, Deserialize)]
+pub struct RogBiosSupportedFunctions {
+    pub post_sound_toggle: bool,
+    pub dedicated_gfx_toggle: bool,
+}
+
+impl GetSupported for CtrlRogBios {
+    type A = RogBiosSupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        RogBiosSupportedFunctions {
+            post_sound_toggle: CtrlRogBios::check_path_exists(ASUS_POST_LOGO_SOUND).is_ok(),
+            dedicated_gfx_toggle: CtrlRogBios::check_path_exists(ASUS_SWITCH_GRAPHIC_MODE).is_ok(),
+        }
+    }
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl CtrlRogBios {
+    pub fn set_dedicated_graphic_mode(&mut self, dedicated: bool) {
+        self.set_gfx_mode(dedicated)
+            .map_err(|err| {
+                warn!("CtrlRogBios: set_asus_switch_graphic_mode {}", err);
+                err
+            })
+            .ok();
+        self.notify_dedicated_graphic_mode(dedicated)
+            .map_err(|err| {
+                warn!("CtrlRogBios: notify_asus_switch_graphic_mode {}", err);
+                err
+            })
+            .ok();
+    }
+
+    pub fn dedicated_graphic_mode(&self) -> i8 {
+        Self::get_gfx_mode()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_gfx_mode {}", err);
+                err
+            })
+            .unwrap_or(-1)
+    }
+
+    #[dbus_interface(signal)]
+    pub fn notify_dedicated_graphic_mode(&self, dedicated: bool) -> zbus::Result<()> {}
+
+    // // // // // // // // // //
+
+    pub fn set_post_boot_sound(&mut self, on: bool) {
+        Self::set_boot_sound(on)
+            .map_err(|err| {
+                warn!("CtrlRogBios: set_post_boot_sound {}", err);
+                err
+            })
+            .ok();
+        self.notify_post_boot_sound(on)
+            .map_err(|err| {
+                warn!("CtrlRogBios: notify_post_boot_sound {}", err);
+                err
+            })
+            .ok();
+    }
+
+    pub fn post_boot_sound(&self) -> i8 {
+        Self::get_boot_sound()
+            .map_err(|err| {
+                warn!("CtrlRogBios: get_boot_sound {}", err);
+                err
+            })
+            .unwrap_or(-1)
+    }
+
+    #[dbus_interface(signal)]
+    pub fn notify_post_boot_sound(&self, dedicated: bool) -> zbus::Result<()> {}
+}
+
+impl crate::ZbusAdd for CtrlRogBios {
+    fn add_to_server(self, server: &mut zbus::ObjectServer) {
+        server
+            .at(&"/org/asuslinux/RogBios".try_into().unwrap(), self)
+            .map_err(|err| {
+                warn!("CtrlRogBios: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+impl crate::Reloadable for CtrlRogBios {
+    fn reload(&mut self) -> Result<(), RogError> {
+        Ok(())
+    }
+}
+
+impl CtrlRogBios {
+    pub fn new(config: Arc<Mutex<Config>>) -> Result<Self, RogError> {
+        match CtrlRogBios::check_path_exists(ASUS_SWITCH_GRAPHIC_MODE) {
+            Ok(_) => {
+                CtrlRogBios::set_path_mutable(ASUS_SWITCH_GRAPHIC_MODE)?;
+            }
+            Err(err) => {
+                info!("ROG Switchable Graphics (bios) not detected: {}", err);
+            }
+        }
+
+        match CtrlRogBios::check_path_exists(ASUS_POST_LOGO_SOUND) {
+            Ok(_) => {
+                CtrlRogBios::set_path_mutable(ASUS_POST_LOGO_SOUND)?;
+            }
+            Err(err) => {
+                info!("ROG boot sound toggle (bios) not detected: {}", err);
+            }
+        }
+
+        Ok(CtrlRogBios { _config: config })
+    }
+
+    fn set_path_mutable(path: &str) -> Result<(), RogError> {
+        let output = Command::new("/usr/bin/chattr")
+            .arg("-i")
+            .arg(path)
+            .output()
+            .map_err(|err| RogError::Path(path.into(), err))?;
+        info!("Set {} writeable: status: {}", path, output.status);
+        Ok(())
+    }
+
+    fn check_path_exists(path: &str) -> Result<(), RogError> {
+        if Path::new(path).exists() {
+            Ok(())
+        } else {
+            Err(RogError::MissingFunction(path.into()))
+        }
+    }
+
+    pub fn has_dedicated_gfx_toggle() -> bool {
+        if CtrlRogBios::check_path_exists(ASUS_SWITCH_GRAPHIC_MODE).is_ok() {
+            return true;
+        }
+        false
+    }
+
+    pub fn get_gfx_mode() -> Result<i8, RogError> {
+        let path = ASUS_SWITCH_GRAPHIC_MODE;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        Ok(data[idx] as i8)
+    }
+
+    pub(super) fn set_gfx_mode(&self, dedicated: bool) -> Result<(), RogError> {
+        let path = ASUS_SWITCH_GRAPHIC_MODE;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data).unwrap();
+
+        let idx = data.len() - 1;
+        if dedicated {
+            data[idx] = 1;
+            info!("Set system-level graphics mode: Dedicated Nvidia");
+        } else {
+            data[idx] = 0;
+            info!("Set system-level graphics mode: Optimus");
+        }
+        file.write_all(&data)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        self.update_initramfs(dedicated)?;
+
+        // if let Ok(ded) = CtrlRogBios::get_gfx_mode() {
+        //     if let Ok(vendor) = CtrlGraphics::get_vendor() {
+        //         if ded == 1 && vendor != "nvidia" {
+        //             warn!("Dedicated GFX toggle is on but driver mode is not nvidia \nSetting to nvidia driver mode");
+        //             CtrlGraphics::set_gfx_config(&GfxVendors::Nvidia)
+        //                 .unwrap_or_else(|err| warn!("Gfx controller: {}", err));
+        //         }
+        //     }
+        // }
+
+        Ok(())
+    }
+
+    pub fn get_boot_sound() -> Result<i8, RogError> {
+        let path = ASUS_POST_LOGO_SOUND;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        Ok(data[idx] as i8)
+    }
+
+    pub(super) fn set_boot_sound(on: bool) -> Result<(), RogError> {
+        let path = ASUS_POST_LOGO_SOUND;
+        let mut file = OpenOptions::new()
+            .read(true)
+            .write(true)
+            .open(path)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        let mut data = Vec::new();
+        file.read_to_end(&mut data)
+            .map_err(|err| RogError::Read(path.into(), err))?;
+
+        let idx = data.len() - 1;
+        if on {
+            data[idx] = 1;
+            info!("Set boot POST sound on");
+        } else {
+            data[idx] = 0;
+            info!("Set boot POST sound off");
+        }
+        file.write_all(&data)
+            .map_err(|err| RogError::Path(path.into(), err))?;
+
+        Ok(())
+    }
+
+    // required for g-sync mode
+    fn update_initramfs(&self, dedicated: bool) -> Result<(), RogError> {
+        let mut initfs_cmd = None;
+
+        if Path::new(INITRAMFS_PATH).exists() {
+            let mut cmd = Command::new("update-initramfs");
+            cmd.arg("-u");
+            initfs_cmd = Some(cmd);
+            info!("Using initramfs update command 'update-initramfs'");
+        } else if Path::new(DRACUT_PATH).exists() {
+            let mut cmd = Command::new("dracut");
+            cmd.arg("-f");
+            cmd.arg("-q");
+            initfs_cmd = Some(cmd);
+            info!("Using initramfs update command 'dracut'");
+        }
+
+        if let Some(mut cmd) = initfs_cmd {
+            info!("Updating initramfs");
+
+            // If switching to Nvidia dedicated we need these modules included
+            if Path::new(DRACUT_PATH).exists() && dedicated {
+                cmd.arg("--add-drivers");
+                cmd.arg("nvidia nvidia-drm nvidia-modeset nvidia-uvm");
+                info!("System uses dracut, forcing nvidia modules to be included in init");
+            } else if Path::new(INITRAMFS_PATH).exists() {
+                let modules = vec![
+                    "nvidia\n",
+                    "nvidia-drm\n",
+                    "nvidia-modeset\n",
+                    "nvidia-uvm\n",
+                ];
+
+                let module_include = Path::new("/etc/initramfs-tools/modules");
+
+                if dedicated {
+                    let mut file = std::fs::OpenOptions::new()
+                        .append(true)
+                        .open(module_include)
+                        .map_err(|err| {
+                            RogError::Write(module_include.to_string_lossy().to_string(), err)
+                        })?;
+                    // add nvidia modules to module_include
+                    file.write_all(modules.concat().as_bytes()).unwrap();
+                } else {
+                    let file = std::fs::OpenOptions::new()
+                        .read(true)
+                        .open(module_include)
+                        .map_err(|err| {
+                            RogError::Write(module_include.to_string_lossy().to_string(), err)
+                        })?;
+
+                    let mut buf = Vec::new();
+                    // remove modules
+                    for line in std::io::BufReader::new(file).lines() {
+                        if let Ok(l) = line {
+                            if !modules.contains(&l.as_ref()) {
+                                buf.append(&mut l.as_bytes().to_vec());
+                            }
+                        }
+                    }
+
+                    let file = std::fs::OpenOptions::new()
+                        .write(true)
+                        .open(module_include)
+                        .map_err(|err| {
+                            RogError::Write(module_include.to_string_lossy().to_string(), err)
+                        })?;
+                    std::io::BufWriter::new(file).write_all(&buf).unwrap();
+                }
+            }
+
+            let status = cmd
+                .status()
+                .map_err(|err| RogError::Write(format!("{:?}", cmd), err))?;
+            if !status.success() {
+                error!("Ram disk update failed");
+                return Err(RogError::Initramfs("Ram disk update failed".into()).into());
+            } else {
+                info!("Successfully updated initramfs");
+            }
+        }
+        Ok(())
+    }
+}

daemon/src/ctrl_supported.rs

@@ -0,0 +1,56 @@
+use std::convert::TryInto;
+
+use log::warn;
+use serde_derive::{Deserialize, Serialize};
+use zbus::dbus_interface;
+
+use crate::{
+    ctrl_anime::{AnimeSupportedFunctions, CtrlAnimeDisplay},
+    ctrl_charge::{ChargeSupportedFunctions, CtrlCharge},
+    ctrl_fan_cpu::{CtrlFanAndCPU, FanCpuSupportedFunctions},
+    ctrl_leds::{CtrlKbdBacklight, LedSupportedFunctions},
+    ctrl_rog_bios::{CtrlRogBios, RogBiosSupportedFunctions},
+    GetSupported,
+};
+
+#[derive(Serialize, Deserialize)]
+pub struct SupportedFunctions {
+    pub anime_ctrl: AnimeSupportedFunctions,
+    pub charge_ctrl: ChargeSupportedFunctions,
+    pub fan_cpu_ctrl: FanCpuSupportedFunctions,
+    pub keyboard_led: LedSupportedFunctions,
+    pub rog_bios_ctrl: RogBiosSupportedFunctions,
+}
+
+#[dbus_interface(name = "org.asuslinux.Daemon")]
+impl SupportedFunctions {
+    fn supported_functions(&self) -> String {
+        serde_json::to_string_pretty(self).unwrap()
+    }
+}
+
+impl crate::ZbusAdd for SupportedFunctions {
+    fn add_to_server(self, server: &mut zbus::ObjectServer) {
+        server
+            .at(&"/org/asuslinux/Supported".try_into().unwrap(), self)
+            .map_err(|err| {
+                warn!("SupportedFunctions: add_to_server {}", err);
+                err
+            })
+            .ok();
+    }
+}
+
+impl GetSupported for SupportedFunctions {
+    type A = SupportedFunctions;
+
+    fn get_supported() -> Self::A {
+        SupportedFunctions {
+            keyboard_led: CtrlKbdBacklight::get_supported(),
+            anime_ctrl: CtrlAnimeDisplay::get_supported(),
+            charge_ctrl: CtrlCharge::get_supported(),
+            fan_cpu_ctrl: CtrlFanAndCPU::get_supported(),
+            rog_bios_ctrl: CtrlRogBios::get_supported(),
+        }
+    }
+}

daemon/src/daemon.rs

@@ -0,0 +1,197 @@
+use daemon::ctrl_charge::CtrlCharge;
+use daemon::ctrl_fan_cpu::{CtrlFanAndCPU, DbusFanAndCpu};
+use daemon::ctrl_leds::{CtrlKbdBacklight, DbusKbdBacklight};
+use daemon::laptops::match_laptop;
+use daemon::{
+    config::Config, ctrl_supported::SupportedFunctions, laptops::print_board_info, GetSupported,
+};
+use daemon::{ctrl_anime::CtrlAnimeDisplay, ctrl_gfx::gfx::CtrlGraphics};
+
+use daemon::{CtrlTask, Reloadable, ZbusAdd};
+use log::LevelFilter;
+use log::{error, info, warn};
+use rog_dbus::DBUS_NAME;
+use rog_types::gfx_vendors::GfxVendors;
+use std::error::Error;
+use std::io::Write;
+use std::sync::Arc;
+use std::sync::Mutex;
+
+use daemon::ctrl_rog_bios::CtrlRogBios;
+use std::convert::Into;
+use std::convert::TryInto;
+use zbus::fdo;
+use zbus::Connection;
+
+pub fn main() -> Result<(), Box<dyn std::error::Error>> {
+    let mut logger = env_logger::Builder::new();
+    logger
+        .target(env_logger::Target::Stdout)
+        .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
+        .filter(None, LevelFilter::Info)
+        .init();
+
+    info!("   daemon v{}", daemon::VERSION);
+    info!(" rog-dbus v{}", rog_dbus::VERSION);
+    info!("rog-types v{}", rog_types::VERSION);
+
+    start_daemon()?;
+    Ok(())
+}
+
+// Timing is such that:
+// - interrupt write is minimum 1ms (sometimes lower)
+// - read interrupt must timeout, minimum of 1ms
+// - for a single usb packet, 2ms total.
+// - to maintain constant times of 1ms, per-key colours should use
+//   the effect endpoint so that the complete colour block is written
+//   as fast as 1ms per row of the matrix inside it. (10ms total time)
+fn start_daemon() -> Result<(), Box<dyn Error>> {
+    let supported = SupportedFunctions::get_supported();
+    print_board_info();
+    println!("{}", serde_json::to_string_pretty(&supported).unwrap());
+
+    let laptop = match_laptop();
+    let config = if let Some(laptop) = laptop.as_ref() {
+        Config::load(laptop.supported_modes())
+    } else {
+        Config::load(&[])
+    };
+
+    let connection = Connection::new_system()?;
+    fdo::DBusProxy::new(&connection)?
+        .request_name(DBUS_NAME, fdo::RequestNameFlags::ReplaceExisting.into())?;
+    let mut object_server = zbus::ObjectServer::new(&connection);
+
+    supported.add_to_server(&mut object_server);
+
+    let enable_gfx_switching = config.gfx_managed;
+    let config = Arc::new(Mutex::new(config));
+
+    match CtrlRogBios::new(config.clone()) {
+        Ok(mut ctrl) => {
+            // Do a reload of any settings
+            ctrl.reload()
+                .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
+            // Then register to dbus server
+            ctrl.add_to_server(&mut object_server);
+        }
+        Err(err) => {
+            error!("rog_bios_control: {}", err);
+        }
+    }
+
+    match CtrlCharge::new(config.clone()) {
+        Ok(mut ctrl) => {
+            // Do a reload of any settings
+            ctrl.reload()
+                .unwrap_or_else(|err| warn!("Battery charge limit: {}", err));
+            // Then register to dbus server
+            ctrl.add_to_server(&mut object_server);
+        }
+        Err(err) => {
+            error!("charge_control: {}", err);
+        }
+    }
+
+    match CtrlAnimeDisplay::new() {
+        Ok(ctrl) => {
+            ctrl.add_to_server(&mut object_server);
+        }
+        Err(err) => {
+            error!("AniMe control: {}", err);
+        }
+    }
+
+    if enable_gfx_switching {
+        match CtrlGraphics::new(config.clone()) {
+            Ok(mut ctrl) => {
+                // Need to check if a laptop has the dedicated gfx switch
+                if CtrlRogBios::has_dedicated_gfx_toggle() {
+                    if let Ok(ded) = CtrlRogBios::get_gfx_mode() {
+                        if let Ok(vendor) = ctrl.get_gfx_mode() {
+                            if ded == 1 && vendor != GfxVendors::Nvidia {
+                                warn!("Dedicated GFX toggle is on but driver mode is not nvidia \nSetting to nvidia driver mode");
+                                let devices = ctrl.devices();
+                                let bus = ctrl.bus();
+                                CtrlGraphics::do_vendor_tasks(GfxVendors::Nvidia, &devices, &bus)?;
+                            } else if ded == 0 {
+                                info!("Dedicated GFX toggle is off");
+                            }
+                        }
+                    }
+                }
+                ctrl.reload()
+                    .unwrap_or_else(|err| error!("Gfx controller: {}", err));
+                ctrl.add_to_server(&mut object_server);
+            }
+            Err(err) => {
+                error!("Gfx control: {}", err);
+            }
+        }
+    }
+
+    // Collect tasks for task thread
+    let mut tasks: Vec<Arc<Mutex<dyn CtrlTask + Send>>> = Vec::new();
+
+    if let Ok(mut ctrl) = CtrlFanAndCPU::new(config.clone()).map_err(|err| {
+        error!("Profile control: {}", err);
+    }) {
+        ctrl.reload()
+            .unwrap_or_else(|err| warn!("Profile control: {}", err));
+        let tmp = Arc::new(Mutex::new(ctrl));
+        DbusFanAndCpu::new(tmp).add_to_server(&mut object_server);
+    };
+
+    if let Some(laptop) = laptop {
+        if let Ok(ctrl) = CtrlKbdBacklight::new(
+            laptop.usb_product(),
+            laptop.condev_iface(),
+            laptop.supported_modes().to_owned(),
+            config,
+        )
+        .map_err(|err| {
+            error!("Keyboard control: {}", err);
+            err
+        }) {
+            let tmp = Arc::new(Mutex::new(ctrl));
+            DbusKbdBacklight::new(tmp.clone()).add_to_server(&mut object_server);
+            tasks.push(tmp);
+        }
+    }
+
+    // TODO: implement messaging between threads to check fails
+    // These tasks generally read a sys path or file to check for a
+    // change
+    let _handle = std::thread::Builder::new()
+        .name("asusd watch".to_string())
+        .spawn(move || loop {
+            std::thread::sleep(std::time::Duration::from_millis(100));
+
+            for ctrl in tasks.iter() {
+                if let Ok(mut lock) = ctrl.try_lock() {
+                    lock.do_task()
+                        .map_err(|err| {
+                            warn!("do_task error: {}", err);
+                        })
+                        .ok();
+                }
+            }
+        });
+
+    object_server
+        .with(&"/org/asuslinux/Charge".try_into()?, |obj: &CtrlCharge| {
+            let x = obj.limit();
+            obj.notify_charge(x as u8)
+        })
+        .map_err(|err| {
+            warn!("object_server notify_charge error: {}", err);
+        })
+        .ok();
+
+    loop {
+        if let Err(err) = object_server.try_handle_next() {
+            eprintln!("{}", err);
+        }
+    }
+}

daemon/src/error.rs

@@ -0,0 +1,83 @@
+use intel_pstate::PStateError;
+use rog_fan_curve::CurveError;
+use rog_types::error::GraphicsError;
+use std::convert::From;
+use std::fmt;
+
+use crate::{ctrl_gfx::error::GfxError, session_manager::SessionError};
+
+#[derive(Debug)]
+pub enum RogError {
+    ParseFanLevel,
+    ParseVendor,
+    ParseLED,
+    MissingProfile(String),
+    Udev(String, std::io::Error),
+    Path(String, std::io::Error),
+    Read(String, std::io::Error),
+    Write(String, std::io::Error),
+    NotSupported,
+    NotFound(String),
+    IntelPstate(PStateError),
+    FanCurve(CurveError),
+    DoTask(String),
+    MissingFunction(String),
+    MissingLedBrightNode(String, std::io::Error),
+    ReloadFail(String),
+    GfxSwitching(GfxError),
+    Initramfs(String),
+    Modprobe(String),
+    Command(String, std::io::Error),
+    Session(SessionError),
+}
+
+impl fmt::Display for RogError {
+    // This trait requires `fmt` with this exact signature.
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        match self {
+            RogError::ParseFanLevel => write!(f, "Parse profile error"),
+            RogError::ParseVendor => write!(f, "Parse gfx vendor error"),
+            RogError::ParseLED => write!(f, "Parse LED error"),
+            RogError::MissingProfile(profile) => write!(f, "Profile does not exist {}", profile),
+            RogError::Udev(deets, error) => write!(f, "udev {}: {}", deets, error),
+            RogError::Path(path, error) => write!(f, "Path {}: {}", path, error),
+            RogError::Read(path, error) => write!(f, "Read {}: {}", path, error),
+            RogError::Write(path, error) => write!(f, "Write {}: {}", path, error),
+            RogError::NotSupported => write!(f, "Not supported"),
+            RogError::NotFound(deets) => write!(f, "Not found: {}", deets),
+            RogError::IntelPstate(err) => write!(f, "Intel pstate error: {}", err),
+            RogError::FanCurve(err) => write!(f, "Custom fan-curve error: {}", err),
+            RogError::DoTask(deets) => write!(f, "Task error: {}", deets),
+            RogError::MissingFunction(deets) => write!(f, "Missing functionality: {}", deets),
+            RogError::MissingLedBrightNode(path, error) => write!(f, "Led node at {} is missing, please check you have the required patch or dkms module installed: {}", path, error),
+            RogError::ReloadFail(deets) => write!(f, "Task error: {}", deets),
+            RogError::GfxSwitching(deets) => write!(f, "Graphics switching error: {}", deets),
+            RogError::Initramfs(detail) => write!(f, "Initiramfs error: {}", detail),
+            RogError::Modprobe(detail) => write!(f, "Modprobe error: {}", detail),
+            RogError::Command(func, error) => write!(f, "Command exec error: {}: {}", func, error),
+            RogError::Session(detail) => write!(f, "Session error: {}", detail),
+        }
+    }
+}
+
+impl std::error::Error for RogError {}
+
+impl From<PStateError> for RogError {
+    fn from(err: PStateError) -> Self {
+        RogError::IntelPstate(err)
+    }
+}
+
+impl From<CurveError> for RogError {
+    fn from(err: CurveError) -> Self {
+        RogError::FanCurve(err)
+    }
+}
+
+impl From<GraphicsError> for RogError {
+    fn from(err: GraphicsError) -> Self {
+        match err {
+            GraphicsError::ParseVendor => RogError::GfxSwitching(GfxError::ParseVendor),
+        }
+    }
+}

daemon/src/laptops.rs

@@ -1,5 +1,5 @@
-use asus_nb::aura_modes::{AuraModes, BREATHING, STATIC, STROBE};
 use log::{info, warn};
+use rog_types::aura_modes::{AuraModes, BREATHING, STATIC};
 use serde_derive::{Deserialize, Serialize};
 use std::fs::OpenOptions;
 use std::io::Read;
@@ -8,6 +8,9 @@ pub static LEDMODE_CONFIG_PATH: &str = "/etc/asusd/asusd-ledmodes.toml";
 
 pub static HELP_ADDRESS: &str = "https://gitlab.com/asus-linux/asus-nb-ctrl";
 
+static LAPTOP_DEVICES: [u16; 4] = [0x1866, 0x1869, 0x1854, 0x19b6];
+
+#[derive(Debug)]
 pub struct LaptopBase {
     usb_product: String,
     condev_iface: Option<String>, // required for finding the Consumer Device interface
@@ -27,25 +30,24 @@ impl LaptopBase {
 }
 
 pub fn match_laptop() -> Option<LaptopBase> {
-    for device in rusb::devices().unwrap().iter() {
-        let device_desc = device.device_descriptor().unwrap();
+    for device in rusb::devices().expect("Couldn't get device").iter() {
+        let device_desc = device
+            .device_descriptor()
+            .expect("Couldn't get device descriptor");
         if device_desc.vendor_id() == 0x0b05 {
-            match device_desc.product_id() {
-                0x1866 => {
-                    let laptop = select_1866_device("1866".to_owned());
-                    print_modes(&laptop.supported_modes);
+            if LAPTOP_DEVICES.contains(&device_desc.product_id()) {
+                let prod_str = format!("{:x?}", device_desc.product_id());
+
+                if device_desc.product_id() == 0x1854 {
+                    let mut laptop = laptop(prod_str, None);
+                    if laptop.supported_modes.is_empty() {
+                        laptop.supported_modes = vec![STATIC, BREATHING];
+                    }
                     return Some(laptop);
                 }
-                0x1869 => return Some(select_1866_device("1869".to_owned())),
-                0x1854 => {
-                    info!("Found GL753 or similar");
-                    return Some(LaptopBase {
-                        usb_product: "1854".to_string(),
-                        condev_iface: None,
-                        supported_modes: vec![STATIC, BREATHING, STROBE],
-                    });
-                }
-                _ => {}
+
+                let laptop = laptop(prod_str, Some("02".to_owned()));
+                return Some(laptop);
             }
         }
     }
@@ -57,18 +59,14 @@ pub fn match_laptop() -> Option<LaptopBase> {
     None
 }
 
-fn select_1866_device(prod: String) -> LaptopBase {
+fn laptop(prod: String, condev_iface: Option<String>) -> LaptopBase {
     let dmi = sysfs_class::DmiId::default();
     let board_name = dmi.board_name().expect("Could not get board_name");
     let prod_family = dmi.product_family().expect("Could not get product_family");
-    let prod_name = dmi.product_name().expect("Could not get product_name");
-
-    info!("Product name: {}", prod_name.trim());
-    info!("Board name: {}", board_name.trim());
 
     let mut laptop = LaptopBase {
         usb_product: prod,
-        condev_iface: Some("02".to_owned()),
+        condev_iface,
         supported_modes: vec![],
     };
 
@@ -81,7 +79,18 @@ fn select_1866_device(prod: String) -> LaptopBase {
     laptop
 }
 
-fn print_modes(supported_modes: &[u8]) {
+pub fn print_board_info() {
+    let dmi = sysfs_class::DmiId::default();
+    let board_name = dmi.board_name().expect("Could not get board_name");
+    let prod_name = dmi.product_name().expect("Could not get product_name");
+    let prod_family = dmi.product_family().expect("Could not get product_family");
+
+    info!("Product name: {}", prod_name.trim());
+    info!("Product family: {}", prod_family.trim());
+    info!("Board name: {}", board_name.trim());
+}
+
+pub fn print_modes(supported_modes: &[u8]) {
     if !supported_modes.is_empty() {
         info!("Supported Keyboard LED modes are:");
         for mode in supported_modes {

daemon/src/lib.rs

@@ -0,0 +1,65 @@
+#![deny(unused_must_use)]
+/// Configuration loading, saving
+pub mod config;
+pub(crate) mod config_old;
+/// Control of AniMe matrix display
+pub mod ctrl_anime;
+/// Control of battery charge level
+pub mod ctrl_charge;
+/// Control CPU min/max freq and turbo, fan mode, fan curves
+///
+/// Intel machines can control:
+/// - CPU min/max frequency
+/// - CPU turbo enable/disable
+/// - Fan mode (normal, boost, silent)
+///
+/// AMD machines can control:
+/// - CPU turbo enable/disable
+/// - Fan mode (normal, boost, silent)
+/// - Fan min/max RPM curve
+pub mod ctrl_fan_cpu;
+/// GPU switching and power
+pub mod ctrl_gfx;
+/// Keyboard LED brightness control, RGB, and LED display modes
+pub mod ctrl_leds;
+/// Control ASUS bios function such as boot sound, Optimus/Dedicated gfx mode
+pub mod ctrl_rog_bios;
+/// Laptop matching to determine capabilities
+pub mod laptops;
+
+/// Fetch all supported functions for the laptop
+pub mod ctrl_supported;
+
+pub mod session_manager;
+
+mod error;
+
+use crate::error::RogError;
+use config::Config;
+use zbus::ObjectServer;
+
+pub static VERSION: &str = env!("CARGO_PKG_VERSION");
+
+pub trait Reloadable {
+    fn reload(&mut self) -> Result<(), RogError>;
+}
+
+pub trait ZbusAdd {
+    fn add_to_server(self, server: &mut ObjectServer);
+}
+
+pub trait CtrlTask {
+    fn do_task(&mut self) -> Result<(), RogError>;
+}
+
+pub trait CtrlTaskComplex {
+    type A;
+
+    fn do_task(&mut self, config: &mut Config, event: Self::A);
+}
+
+pub trait GetSupported {
+    type A;
+
+    fn get_supported() -> Self::A;
+}

daemon/src/session_manager.rs

@@ -0,0 +1,175 @@
+use log::{error, warn};
+use serde_derive::{Deserialize, Serialize};
+use std::process::Command;
+
+#[derive(Debug, PartialEq)]
+enum SessionType {
+    X11,
+    Wayland,
+    TTY,
+}
+
+#[derive(Deserialize, Serialize, Debug)]
+pub struct UserSession {
+    pub session: String,
+    pub uid: u32,
+    pub user: String,
+    pub seat: String,
+    pub tty: String,
+}
+
+#[derive(Debug)]
+pub struct Session {
+    session_id: String,
+    session_type: SessionType,
+}
+
+pub fn are_gfx_sessions_alive(sessions: &[Session]) -> bool {
+    for session in sessions {
+        match is_gfx_alive(session) {
+            Ok(alive) => {
+                if alive {
+                    return true;
+                }
+            }
+            Err(err) => warn!("Error checking sessions: {}", err),
+        }
+    }
+    false
+}
+
+pub fn get_sessions() -> Result<Vec<Session>, SessionError> {
+    // loginctl list-sessions --no-legend
+    let mut cmd = Command::new("loginctl");
+    cmd.arg("list-sessions");
+    cmd.arg("--output");
+    cmd.arg("json");
+
+    let mut sessions = Vec::new();
+
+    match cmd.output() {
+        Ok(output) => {
+            if !output.status.success() {
+                error!(
+                    "Couldn't get sessions: {}",
+                    String::from_utf8_lossy(&output.stderr)
+                );
+            } else if output.status.success() {
+                if let Ok(data) = serde_json::from_slice::<Vec<UserSession>>(&output.stdout) {
+                    for s in &data {
+                        if let Ok(t) = get_session_type(&s.session) {
+                            sessions.push(Session {
+                                session_id: s.session.to_owned(),
+                                session_type: t,
+                            })
+                        }
+                    }
+                    return Ok(sessions);
+                }
+            }
+        }
+        Err(err) => error!("Couldn't get sessions: {}", err),
+    }
+    Err(SessionError::NoSessions)
+}
+
+fn is_gfx_alive(session: &Session) -> Result<bool, SessionError> {
+    if session.session_type == SessionType::TTY {
+        return Ok(false);
+    }
+    let session_id = session.session_id.to_owned();
+    let mut cmd = Command::new("loginctl");
+    cmd.arg("show-session");
+    cmd.arg(&session_id);
+    cmd.arg("--property");
+    cmd.arg("Type");
+
+    match cmd.output() {
+        Ok(output) => {
+            if !output.status.success() {
+                let msg = String::from_utf8_lossy(&output.stderr);
+                if msg.contains("No session") {
+                    return Ok(false);
+                }
+                error!(
+                    "Couldn't get session: {}",
+                    String::from_utf8_lossy(&output.stderr)
+                );
+            } else if output.status.success() {
+                return Ok(true);
+            }
+        }
+        Err(err) => error!("Couldn't get session: {}", err),
+    }
+    Ok(false)
+}
+
+fn get_session_type(session_id: &str) -> Result<SessionType, SessionError> {
+    //loginctl show-session 2 --property Type
+    let mut cmd = Command::new("loginctl");
+    cmd.arg("show-session");
+    cmd.arg(session_id);
+    cmd.arg("--property");
+    cmd.arg("Type");
+    cmd.arg("--property");
+    cmd.arg("Class");
+
+    match cmd.output() {
+        Ok(output) => {
+            if !output.status.success() {
+                let msg = String::from_utf8_lossy(&output.stderr);
+                if msg.contains("No session") {
+                    return Err(SessionError::NoSession(session_id.into()));
+                }
+                error!(
+                    "Couldn't get session: {}",
+                    String::from_utf8_lossy(&output.stderr)
+                );
+            } else if output.status.success() {
+                let what = String::from_utf8_lossy(&output.stdout);
+                let mut stype = SessionType::TTY;
+                let mut user = false;
+                for line in what.lines() {
+                    if let Some(is_it) = line.split("=").last() {
+                        match is_it.trim() {
+                            "user" => user = true,
+                            "wayland" => stype = SessionType::Wayland,
+                            "x11" => stype = SessionType::X11,
+                            "tty" => stype = SessionType::TTY,
+                            _ => return Err(SessionError::NoSession(session_id.into())),
+                        }
+                    }
+                }
+                if user {
+                    return Ok(stype);
+                }
+            }
+        }
+        Err(err) => error!("Couldn't get session: {}", err),
+    }
+    Err(SessionError::NoSession(session_id.into()))
+}
+
+use std::fmt;
+
+#[derive(Debug)]
+pub enum SessionError {
+    NoSession(String),
+    NoSessions,
+    Command(String, std::io::Error),
+}
+
+impl fmt::Display for SessionError {
+    // This trait requires `fmt` with this exact signature.
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        match self {
+            SessionError::NoSession(id) => write!(f, "Session {} not active", id),
+            SessionError::NoSessions => write!(f, "No active sessions"),
+            SessionError::Command(func, error) => {
+                write!(f, "Command exec error: {}: {}", func, error)
+            }
+        }
+    }
+}
+
+impl std::error::Error for SessionError {}

data/90-asusd-nvidia-pm.rules

@@ -0,0 +1,7 @@
+# Enable runtime PM for NVIDIA VGA/3D controller devices on driver bind
+ACTION=="bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030000", TEST=="power/control", ATTR{power/control}="auto"
+ACTION=="bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030200", TEST=="power/control", ATTR{power/control}="auto"
+
+# Disable runtime PM for NVIDIA VGA/3D controller devices on driver unbind
+ACTION=="unbind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030000", TEST=="power/control", ATTR{power/control}="on"
+ACTION=="unbind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x030200", TEST=="power/control", ATTR{power/control}="on"

data/90-nvidia-screen-G05.conf

@@ -0,0 +1,4 @@
+Section "ServerLayout"
+  Identifier "layout"
+  Option "AllowNVIDIAGPUScreens"
+EndSection

data/_asusctl

@@ -0,0 +1,50 @@
+function _asusctl() {
+    local line
+    
+    _arguments -C \
+        {-h,--help}'[print help message]' \
+        {-v,--version}'[print version number]' \
+        {-k,--kbd-bright}':[Set keyboard brightness (off, low, med, high)]' \
+        {-p,--pwr-profile}':[Set power profile (silent, normal, boost)]' \
+        {-c,--chg-limit}':[Set charging limit (20-100)]' \
+        ': :((led-mode\:"Set the keyboard lighting from built-in modes" profile\:"Create and configure profiles" graphics\:"Set the graphics mode"))' \
+        '*::arg:->args'
+    case $line[1] in
+        led-mode)
+            _arguments ': :((static\:"set a single static colour"
+                       breathe\:"pulse between one or two colours"
+                       strobe\:"strobe through all colours"
+                       rainbow\:"rainbow cycling in one of four directions"
+                       star\:"rain pattern mimicking raindrops"
+                       rain\:"rain pattern of three preset colours"
+                       highlight\:"pressed keys are highlighted to fade"
+                       laser\:"pressed keys generate horizontal laser"
+                       ripple\:"pressed keys ripple outwards like a splash"
+                       pulse\:"set a rapid pulse"
+                       comet\:"set a vertical line zooming from left"
+                       flash\:"set a wide vertical line zooming from left"
+                       multi-static\:"4-zone multi-colour"))' \
+                       {-h,--help}'[print help message]' \
+                       '-c:[set the RGB value e.g, ff00ff]' \
+                       '-s:[set the speed (low, med, high)]'
+            ;;
+        profile)
+            _arguments {-h,--help}'[print help message]' \
+                       {-c,--create}"[create the profile if it doesn't exist]" \
+                       {-t,--turbo}':[enable or disable cpu turbo]' \
+                       {-m,--min-percentage}':[set min cpu scaling (intel)]' \
+                       {-M,--max-percentage}':[set max cpu scaling (intel)]' \
+                       {-p,--preset}':[<silent, normal, boost>]' \
+                       {-C,--curve}':[set fan curve]'
+
+            ;;
+        graphics)
+            _arguments {-h,--help}'[print help message]' \
+                       {-m,--mode}':[Set graphics mode (nvidia, hybrid, compute, integrated)]' \
+                       {-g,--get}'[Get the current mode]' \
+                       {-p,--pow}'[Get the current power status]' \
+                       {-f,--force}'[Do not ask for confirmation]'
+            ;;
+    esac
+}
+compdef _asusctl asusctl

data/asus-notify.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=ASUS Notifications
+StartLimitInterval=200
+StartLimitBurst=2
+
+[Service]
+ExecStartPre=/usr/bin/sleep 2
+ExecStart=/usr/bin/asus-notify
+Restart=on-failure
+RestartSec=1
+Type=simple
+
+[Install]
+WantedBy=default.target

data/asusd-alt.service

@@ -0,0 +1,12 @@
+[Unit]
+Description=ASUS Notebook Control
+After=basic.target syslog.target
+
+[Service]
+ExecStart=/usr/bin/asusd
+Restart=on-failure
+Type=dbus
+BusName=org.asuslinux.Daemon
+
+[Install]
+WantedBy=multi-user.target

data/asusd-ledmodes.toml

@@ -1,7 +1,22 @@
 [[led_modes]]
 prod_family = "Zephyrus S"
 board_names = ["GX502", "GX701", "G531", "GL531", "G532"]
-led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 255]
+led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 255]
+
+[[led_modes]]
+prod_family = "Zephyrus M"
+board_names = ["GU502GV"]
+led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 255]
+
+[[led_modes]]
+prod_family = "ROG Zephyrus M15"
+board_names = ["GU502LW"]
+led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 255]
+
+[[led_modes]]
+prod_family = "ROG Zephyrus M15"
+board_names = ["GU502LU"]
+led_modes = [0, 1, 2, 10]
 
 [[led_modes]]
 prod_family = "Zephyrus"
@@ -11,22 +26,22 @@ led_modes = [0, 1, 2, 3, 10, 13]
 [[led_modes]]
 prod_family = "ROG Strix"
 board_names = ["G531GW"]
-led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 255]
+led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 255]
 
 [[led_modes]]
 prod_family = "ROG Strix"
 board_names = ["GX531", "G512LV", "G712LV"]
-led_modes = [0, 1, 2, 3, 10, 13]
+led_modes = [0, 1, 2, 3, 10, 13, 14]
 
 [[led_modes]]
 prod_family = "ROG Strix"
-board_names = ["G512LI", "G712LI"]
+board_names = ["G512LI", "G712LI", "G531GD"]
 led_modes = [0, 1, 2, 3, 10]
 
 [[led_modes]]
 prod_family = "Strix"
 board_names = ["G731GV", "G731GW", "G531GV"]
-led_modes = [0, 1, 2, 3, 13]
+led_modes = [0, 1, 2, 3, 13, 14]
 
 [[led_modes]]
 prod_family = "Strix"
@@ -36,4 +51,9 @@ led_modes = [0, 1, 2, 3]
 [[led_modes]]
 prod_family = "Strix Scar"
 board_names = ["G531", "G731"]
-led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 255]
+led_modes = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 13, 14, 255]
+
+[[led_modes]]
+prod_family = "ROG"
+board_names = ["GL553VE"]
+led_modes = [0, 1, 2, 13, 14]

data/asusd.conf

@@ -10,6 +10,10 @@
         <allow send_destination="org.asuslinux.Daemon"/>
         <allow receive_sender="org.asuslinux.Daemon"/>
     </policy>
+    <policy group="users">
+        <allow send_destination="org.asuslinux.Daemon"/>
+        <allow receive_sender="org.asuslinux.Daemon"/>
+    </policy>
     <policy group="wheel">
         <allow send_destination="org.asuslinux.Daemon"/>
         <allow receive_sender="org.asuslinux.Daemon"/>

data/asusd.rules

@@ -1 +1,2 @@
-ACTION=="add|change", SUBSYSTEM=="input", ENV{ID_VENDOR_ID}=="0b05", ENV{ID_MODEL_ID}=="18[0-9][0-9]", ENV{ID_TYPE}=="hid", TAG+="systemd", ENV{SYSTEMD_WANTS}="asusd.service"
+ACTION=="add|change", SUBSYSTEM=="input", ENV{ID_VENDOR_ID}=="0b05", ENV{ID_MODEL_ID}=="1[89][a-zA-Z0-9][a-zA-Z0-9]|193b", ENV{ID_TYPE}=="hid", TAG+="systemd", ENV{SYSTEMD_WANTS}="asusd.service"
+ACTION=="add|remove", SUBSYSTEM=="input", ENV{ID_VENDOR_ID}=="0b05", ENV{ID_MODEL_ID}=="1[89][a-zA-Z0-9][a-zA-Z0-9]|193b", RUN+="systemctl restart asusd.service"

data/asusd.service

@@ -2,6 +2,7 @@
 Description=ASUS Notebook Control
 StartLimitInterval=200
 StartLimitBurst=2
+Before=display-manager.service
 
 [Service]
 ExecStart=/usr/bin/asusd

kernel-patch/0001-HID-asus-add-support-for-ASUS-N-Key-keyboard-v5.7.patch

@@ -1,338 +0,0 @@
-From 61e7ffe80b12db8ebb6033cfe2b70cccaefc07e1 Mon Sep 17 00:00:00 2001
-From: Luke D Jones <luke@ljones.dev>
-Date: Sat, 1 Aug 2020 20:33:28 +1200
-Subject: [PATCH] HID: asus: add support for ASUS N-Key keyboard
-
-Enable missing functionality of the keyboard found in many ASUS
-Zephyrus laptops: Fn key combos and hotkeys, keyboard backlight
-brightness control, and notify asus-wmi to toggle "fan-mode".
-Two input event codes are added for keyboard LED mode switching
-prev/next.
-
-The keyboard has many of the same key outputs as the existing G752
-keyboard including a few extras, and varies a little between laptop
-models.
-
-Additionally the keyboard requires the LED interface to be
-intitialised before such things as keyboard backlight control work.
-
-Misc changes in scope: update some hardcoded comparisons to use an
-available define, change "Mic Toggle" to use a keycode that works.
-
-Signed-off-by: Luke D Jones <luke@ljones.dev>
----
- drivers/hid/hid-asus.c                     | 164 ++++++++++++++++++---
- drivers/hid/hid-ids.h                      |   1 +
- include/linux/platform_data/x86/asus-wmi.h |   2 +
- include/uapi/linux/input-event-codes.h     |   7 +
- 4 files changed, 152 insertions(+), 22 deletions(-)
-
-diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
-index e6e4c841fb06..fa9928672110 100644
---- a/drivers/hid/hid-asus.c
-+++ b/drivers/hid/hid-asus.c
-@@ -26,10 +26,12 @@
- #include <linux/dmi.h>
- #include <linux/hid.h>
- #include <linux/module.h>
-+#include <linux/acpi.h>
- #include <linux/platform_data/x86/asus-wmi.h>
- #include <linux/input/mt.h>
- #include <linux/usb.h> /* For to_usb_interface for T100 touchpad intf check */
- #include <linux/power_supply.h>
-+#include <../drivers/platform/x86/asus-wmi.h>
- 
- #include "hid-ids.h"
- 
-@@ -46,6 +48,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
- #define INPUT_REPORT_ID 0x5d
- #define FEATURE_KBD_REPORT_ID 0x5a
- #define FEATURE_KBD_REPORT_SIZE 16
-+#define FEATURE_KBD_LED_REPORT_ID1 0x5d
-+#define FEATURE_KBD_LED_REPORT_ID2 0x5e
- 
- #define SUPPORT_KBD_BACKLIGHT BIT(0)
- 
-@@ -77,6 +81,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
- #define QUIRK_G752_KEYBOARD		BIT(8)
- #define QUIRK_T101HA_DOCK		BIT(9)
- #define QUIRK_T90CHI			BIT(10)
-+#define QUIRK_ROG_NKEY_KEYBOARD		BIT(12)
- 
- #define I2C_KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
- 						 QUIRK_NO_INIT_REPORTS | \
-@@ -257,10 +262,33 @@ static int asus_report_input(struct asus_drvdata *drvdat, u8 *data, int size)
- 	return 1;
- }
- 
-+/*
-+ * This enables triggering events in asus-wmi
-+*/
-+static int asus_wmi_send_event(struct asus_drvdata *drvdat, u8 code)
-+{
-+	int err;
-+	u32 retval;
-+
-+	err = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DEVS,
-+		ASUS_WMI_METHODID_NOTIF, code, &retval);
-+	if (err) {
-+		pr_warn("Failed to notify asus-wmi: %d\n", err);
-+		return err;
-+	}
-+
-+	if (retval != 0) {
-+		pr_warn("Failed to notify asus-wmi (retval): 0x%x\n", retval);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
- static int asus_event(struct hid_device *hdev, struct hid_field *field,
- 		      struct hid_usage *usage, __s32 value)
- {
--	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000 &&
-+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR &&
- 	    (usage->hid & HID_USAGE) != 0x00 &&
- 	    (usage->hid & HID_USAGE) != 0xff && !usage->type) {
- 		hid_warn(hdev, "Unmapped Asus vendor usagepage code 0x%02x\n",
-@@ -281,6 +309,20 @@ static int asus_raw_event(struct hid_device *hdev,
- 	if (drvdata->tp && data[0] == INPUT_REPORT_ID)
- 		return asus_report_input(drvdata, data, size);
- 
-+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
-+		/*
-+		 * Skip these report ID, the device emits a continuous stream associated
-+		 * with the AURA mode it is in
-+		*/
-+		if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
-+				report->id == FEATURE_KBD_LED_REPORT_ID2) {
-+			return -1;
-+		/* Fn+F5 "fan" symbol, trigger WMI event to toggle next mode */
-+		} else if (report->id == FEATURE_KBD_REPORT_ID && data[1] == 0xae) {
-+			return asus_wmi_send_event(drvdata, 0xae);
-+		}
-+	}
-+
- 	return 0;
- }
- 
-@@ -293,7 +335,9 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size
- 	if (!dmabuf)
- 		return -ENOMEM;
- 
--	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
-+	// The report ID should be set from the incoming buffer due to LED and key
-+	// interfaces having different pages
-+	ret = hid_hw_raw_request(hdev, buf[0], dmabuf,
- 				 buf_size, HID_FEATURE_REPORT,
- 				 HID_REQ_SET_REPORT);
- 	kfree(dmabuf);
-@@ -346,6 +390,44 @@ static int asus_kbd_get_functions(struct hid_device *hdev,
- 	return ret;
- }
- 
-+static int asus_kbd_led_init(struct hid_device *hdev)
-+{
-+	u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
-+	u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20,
-+				0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
-+	u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
-+						0x05, 0x20, 0x31, 0x00, 0x08 };
-+	int ret;
-+
-+	hid_warn(hdev, "Asus initialise N-KEY Device");
-+	/* The first message is an init start */
-+	ret = asus_kbd_set_report(hdev, buf_init_start, sizeof(buf_init_start));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init start command: %d\n", ret);
-+	/* Followed by a string */
-+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 1.0: %d\n", ret);
-+	/* Followed by a string */
-+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 1.1: %d\n", ret);
-+
-+	/* begin second report ID with same data */
-+	buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
-+	buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;
-+
-+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 2.0: %d\n", ret);
-+
-+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 2.1: %d\n", ret);
-+
-+	return ret;
-+}
-+
- static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
- 				   enum led_brightness brightness)
- {
-@@ -409,19 +491,28 @@ static int asus_kbd_register_leds(struct hid_device *hdev)
- 	unsigned char kbd_func;
- 	int ret;
- 
--	/* Initialize keyboard */
--	ret = asus_kbd_init(hdev);
--	if (ret < 0)
--		return ret;
-+	if (drvdata->quirks & QUIRK_G752_KEYBOARD) {
-+		/* Initialize keyboard */
-+		ret = asus_kbd_init(hdev);
-+		if (ret < 0)
-+			return ret;
- 
--	/* Get keyboard functions */
--	ret = asus_kbd_get_functions(hdev, &kbd_func);
--	if (ret < 0)
--		return ret;
-+		/* Get keyboard functions */
-+		ret = asus_kbd_get_functions(hdev, &kbd_func);
-+		if (ret < 0)
-+			return ret;
- 
--	/* Check for backlight support */
--	if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
--		return -ENODEV;
-+		/* Check for backlight support */
-+		if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
-+			return -ENODEV;
-+	}
-+
-+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
-+		/* Initialize keyboard LED interface and Vendor keys on 0x1866 */
-+		ret = asus_kbd_led_init(hdev);
-+		if (ret < 0)
-+			return ret;
-+	}
- 
- 	drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
- 					      sizeof(struct asus_kbd_leds),
-@@ -693,14 +784,14 @@ static int asus_input_mapping(struct hid_device *hdev,
- 	}
- 
- 	/* ASUS-specific keyboard hotkeys */
--	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
-+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) {
- 		set_bit(EV_REP, hi->input->evbit);
- 		switch (usage->hid & HID_USAGE) {
- 		case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
- 		case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);		break;
- 		case 0x35: asus_map_key_clear(KEY_DISPLAY_OFF);		break;
- 		case 0x6c: asus_map_key_clear(KEY_SLEEP);		break;
--		case 0x7c: asus_map_key_clear(KEY_MICMUTE);		break;
-+		case 0x7c: asus_map_key_clear(KEY_F20);		break;
- 		case 0x82: asus_map_key_clear(KEY_CAMERA);		break;
- 		case 0x88: asus_map_key_clear(KEY_RFKILL);			break;
- 		case 0xb5: asus_map_key_clear(KEY_CALC);			break;
-@@ -713,16 +804,42 @@ static int asus_input_mapping(struct hid_device *hdev,
- 		/* ROG key */
- 		case 0x38: asus_map_key_clear(KEY_PROG1);		break;
- 
--		/* Fn+C ASUS Splendid */
--		case 0xba: asus_map_key_clear(KEY_PROG2);		break;
-+		default:
-+			if (drvdata->quirks & QUIRK_G752_KEYBOARD) {
-+				switch (usage->hid & HID_USAGE) {
-+				/* Fn+C ASUS Splendid */
-+				case 0xba: asus_map_key_clear(KEY_PROG2);		break;
- 
--		/* Fn+Space Power4Gear Hybrid */
--		case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
-+				/* Fn+Space Power4Gear Hybrid */
-+				case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
- 
--		/* Fn+F5 "fan" symbol on FX503VD */
--		case 0x99: asus_map_key_clear(KEY_PROG4);		break;
-+				/* Fn+F5 "fan" symbol on FX503VD */
-+				case 0x99: asus_map_key_clear(KEY_PROG4);		break;
-+
-+				default:
-+					return -1;
-+				}
-+				break;
-+			}
-+
-+			/* device 0x1866, N-KEY Device specific */
-+			if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
-+				switch (usage->hid & HID_USAGE) {
-+				/* Fn+Ret "Calc" symbol on device 0x1866, N-KEY Device */
-+				case 0x92: asus_map_key_clear(KEY_CALC);		break;
-+
-+				/* Fn+Left Aura mode previous */
-+				case 0xb2: asus_map_key_clear(KEY_KBDILLUM_MODE_PREV);	break;
-+
-+				/* Fn+Right Aura mode next */
-+				case 0xb3: asus_map_key_clear(KEY_KBDILLUM_MODE_NEXT);	break;
-+
-+				default:
-+					return -1;
-+				}
-+				break;
-+			}
- 
--		default:
- 			/* ASUS lazily declares 256 usages, ignore the rest,
- 			 * as some make the keyboard appear as a pointer device. */
- 			return -1;
-@@ -1043,6 +1160,9 @@ static const struct hid_device_id asus_devices[] = {
- 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
- 		USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD),
- 	  QUIRK_USE_KBD_BACKLIGHT },
-+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
-+	    USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
-+	  QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
- 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
- 		USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
- 	  QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
-diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
-index 1c71a1aa76b2..42c2ca3832e0 100644
---- a/drivers/hid/hid-ids.h
-+++ b/drivers/hid/hid-ids.h
-@@ -193,6 +193,7 @@
- #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
- #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
- #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822
-+#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD	0x1866
- #define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD	0x1869
- 
- #define USB_VENDOR_ID_ATEN		0x0557
-diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
-index d39fc658c320..10fca778ff9c 100644
---- a/include/linux/platform_data/x86/asus-wmi.h
-+++ b/include/linux/platform_data/x86/asus-wmi.h
-@@ -27,6 +27,8 @@
- #define ASUS_WMI_METHODID_INIT		0x54494E49 /* INITialize */
- #define ASUS_WMI_METHODID_HKEY		0x59454B48 /* Hot KEY ?? */
- 
-+#define ASUS_WMI_METHODID_NOTIF		0x00100021 /* Notify method ?? */
-+
- #define ASUS_WMI_UNSUPPORTED_METHOD	0xFFFFFFFE
- 
- /* Wireless */
-diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
-index b6a835d37826..928abcf020d5 100644
---- a/include/uapi/linux/input-event-codes.h
-+++ b/include/uapi/linux/input-event-codes.h
-@@ -772,6 +772,13 @@
- #define BTN_TRIGGER_HAPPY39		0x2e6
- #define BTN_TRIGGER_HAPPY40		0x2e7
- 
-+/*
-+ * Some keyboards have function keys associated with
-+ * changing the keyboard backlight modes, e.g, RGB patterns
-+ */
-+#define KEY_KBDILLUM_MODE_PREV	0x2ea
-+#define KEY_KBDILLUM_MODE_NEXT	0x2eb
-+
- /* We avoid low common keys in module aliases so they don't get huge. */
- #define KEY_MIN_INTERESTING	KEY_MUTE
- #define KEY_MAX			0x2ff
--- 
-2.26.2
-

kernel-patch/0001-HID-asus-add-support-for-ASUS-N-Key-keyboard-v5.8.patch

@@ -1,339 +0,0 @@
-From 2b70c3daf1bd92f9163efb726e37fb3e0bcc8989 Mon Sep 17 00:00:00 2001
-From: Luke D Jones <luke@ljones.dev>
-Date: Thu, 30 Jul 2020 16:51:06 +1200
-Subject: [PATCH] HID: asus: add support for ASUS N-Key keyboard
-
-Enable missing functionality of the keyboard found in many ASUS
-Zephyrus laptops: Fn key combos and hotkeys, keyboard backlight
-brightness control, and notify asus-wmi to toggle "fan-mode".
-Two input event codes are added for keyboard LED mode switching
-prev/next.
-
-The keyboard has many of the same key outputs as the existing G752
-keyboard including a few extras, and varies a little between laptop
-models.
-
-Additionally the keyboard requires the LED interface to be
-intitialised before such things as keyboard backlight control work.
-
-Misc changes in scope: update some hardcoded comparisons to use an
-available define, change "Mic Toggle" to use a keycode that works.
-
-Signed-off-by: Luke D Jones <luke@ljones.dev>
----
- drivers/hid/hid-asus.c                     | 166 ++++++++++++++++++---
- drivers/hid/hid-ids.h                      |   1 +
- include/linux/platform_data/x86/asus-wmi.h |   2 +
- include/uapi/linux/input-event-codes.h     |   7 +
- 4 files changed, 153 insertions(+), 23 deletions(-)
-
-diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
-index c183caf89d49..5dfca90cd616 100644
---- a/drivers/hid/hid-asus.c
-+++ b/drivers/hid/hid-asus.c
-@@ -26,10 +26,12 @@
- #include <linux/dmi.h>
- #include <linux/hid.h>
- #include <linux/module.h>
-+#include <linux/acpi.h>
- #include <linux/platform_data/x86/asus-wmi.h>
- #include <linux/input/mt.h>
- #include <linux/usb.h> /* For to_usb_interface for T100 touchpad intf check */
- #include <linux/power_supply.h>
-+#include <../drivers/platform/x86/asus-wmi.h>
- 
- #include "hid-ids.h"
- 
-@@ -48,6 +50,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
- #define INPUT_REPORT_ID 0x5d
- #define FEATURE_KBD_REPORT_ID 0x5a
- #define FEATURE_KBD_REPORT_SIZE 16
-+#define FEATURE_KBD_LED_REPORT_ID1 0x5d
-+#define FEATURE_KBD_LED_REPORT_ID2 0x5e
- 
- #define SUPPORT_KBD_BACKLIGHT BIT(0)
- 
-@@ -80,6 +84,7 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
- #define QUIRK_T101HA_DOCK		BIT(9)
- #define QUIRK_T90CHI			BIT(10)
- #define QUIRK_MEDION_E1239T		BIT(11)
-+#define QUIRK_ROG_NKEY_KEYBOARD		BIT(12)
- 
- #define I2C_KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
- 						 QUIRK_NO_INIT_REPORTS | \
-@@ -305,10 +310,33 @@ static int asus_e1239t_event(struct asus_drvdata *drvdat, u8 *data, int size)
- 	return 0;
- }
- 
-+/*
-+ * This enables triggering events in asus-wmi
-+ */
-+static int asus_wmi_send_event(struct asus_drvdata *drvdat, u8 code)
-+{
-+	int err;
-+	u32 retval;
-+
-+	err = asus_wmi_evaluate_method(ASUS_WMI_METHODID_DEVS,
-+		ASUS_WMI_METHODID_NOTIF, code, &retval);
-+	if (err) {
-+		pr_warn("Failed to notify asus-wmi: %d\n", err);
-+		return err;
-+	}
-+
-+	if (retval != 0) {
-+		pr_warn("Failed to notify asus-wmi (retval): 0x%x\n", retval);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
- static int asus_event(struct hid_device *hdev, struct hid_field *field,
- 		      struct hid_usage *usage, __s32 value)
- {
--	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000 &&
-+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR &&
- 	    (usage->hid & HID_USAGE) != 0x00 &&
- 	    (usage->hid & HID_USAGE) != 0xff && !usage->type) {
- 		hid_warn(hdev, "Unmapped Asus vendor usagepage code 0x%02x\n",
-@@ -332,6 +360,20 @@ static int asus_raw_event(struct hid_device *hdev,
- 	if (drvdata->quirks & QUIRK_MEDION_E1239T)
- 		return asus_e1239t_event(drvdata, data, size);
- 
-+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
-+		/*
-+		 * Skip these report ID, the device emits a continuous stream associated
-+		 * with the AURA mode it is in
-+		 */
-+		if (report->id == FEATURE_KBD_LED_REPORT_ID1 ||
-+				report->id == FEATURE_KBD_LED_REPORT_ID2) {
-+			return -1;
-+		/* Fn+F5 "fan" symbol, trigger WMI event to toggle next mode */
-+		} else if (report->id == FEATURE_KBD_REPORT_ID && data[1] == 0xae) {
-+			return asus_wmi_send_event(drvdata, 0xae);
-+		}
-+	}
-+
- 	return 0;
- }
- 
-@@ -344,7 +386,9 @@ static int asus_kbd_set_report(struct hid_device *hdev, u8 *buf, size_t buf_size
- 	if (!dmabuf)
- 		return -ENOMEM;
- 
--	ret = hid_hw_raw_request(hdev, FEATURE_KBD_REPORT_ID, dmabuf,
-+	// The report ID should be set from the incoming buffer due to LED and key
-+	// interfaces having different pages
-+	ret = hid_hw_raw_request(hdev, buf[0], dmabuf,
- 				 buf_size, HID_FEATURE_REPORT,
- 				 HID_REQ_SET_REPORT);
- 	kfree(dmabuf);
-@@ -397,6 +441,44 @@ static int asus_kbd_get_functions(struct hid_device *hdev,
- 	return ret;
- }
- 
-+static int asus_kbd_led_init(struct hid_device *hdev)
-+{
-+	u8 buf_init_start[] = { FEATURE_KBD_LED_REPORT_ID1, 0xB9 };
-+	u8 buf_init2[] = { FEATURE_KBD_LED_REPORT_ID1, 0x41, 0x53, 0x55, 0x53, 0x20,
-+				0x54, 0x65, 0x63, 0x68, 0x2e, 0x49, 0x6e, 0x63, 0x2e, 0x00 };
-+	u8 buf_init3[] = { FEATURE_KBD_LED_REPORT_ID1,
-+						0x05, 0x20, 0x31, 0x00, 0x08 };
-+	int ret;
-+
-+	hid_warn(hdev, "Asus initialise N-KEY Device");
-+	/* The first message is an init start */
-+	ret = asus_kbd_set_report(hdev, buf_init_start, sizeof(buf_init_start));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init start command: %d\n", ret);
-+	/* Followed by a string */
-+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 1.0: %d\n", ret);
-+	/* Followed by a string */
-+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 1.1: %d\n", ret);
-+
-+	/* begin second report ID with same data */
-+	buf_init2[0] = FEATURE_KBD_LED_REPORT_ID2;
-+	buf_init3[0] = FEATURE_KBD_LED_REPORT_ID2;
-+
-+	ret = asus_kbd_set_report(hdev, buf_init2, sizeof(buf_init2));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 2.0: %d\n", ret);
-+
-+	ret = asus_kbd_set_report(hdev, buf_init3, sizeof(buf_init3));
-+	if (ret < 0)
-+		hid_err(hdev, "Asus failed to send init command 2.1: %d\n", ret);
-+
-+	return ret;
-+}
-+
- static void asus_kbd_backlight_set(struct led_classdev *led_cdev,
- 				   enum led_brightness brightness)
- {
-@@ -460,19 +542,28 @@ static int asus_kbd_register_leds(struct hid_device *hdev)
- 	unsigned char kbd_func;
- 	int ret;
- 
--	/* Initialize keyboard */
--	ret = asus_kbd_init(hdev);
--	if (ret < 0)
--		return ret;
-+	if (drvdata->quirks & QUIRK_G752_KEYBOARD) {
-+		/* Initialize keyboard */
-+		ret = asus_kbd_init(hdev);
-+		if (ret < 0)
-+			return ret;
- 
--	/* Get keyboard functions */
--	ret = asus_kbd_get_functions(hdev, &kbd_func);
--	if (ret < 0)
--		return ret;
-+		/* Get keyboard functions */
-+		ret = asus_kbd_get_functions(hdev, &kbd_func);
-+		if (ret < 0)
-+			return ret;
- 
--	/* Check for backlight support */
--	if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
--		return -ENODEV;
-+		/* Check for backlight support */
-+		if (!(kbd_func & SUPPORT_KBD_BACKLIGHT))
-+			return -ENODEV;
-+	}
-+
-+	if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
-+		/* Initialize keyboard LED interface and Vendor keys on 0x1866 */
-+		ret = asus_kbd_led_init(hdev);
-+		if (ret < 0)
-+			return ret;
-+	}
- 
- 	drvdata->kbd_backlight = devm_kzalloc(&hdev->dev,
- 					      sizeof(struct asus_kbd_leds),
-@@ -751,14 +842,14 @@ static int asus_input_mapping(struct hid_device *hdev,
- 	     usage->hid == (HID_UP_GENDEVCTRLS | 0x0026)))
- 		return -1;
- 
--	/* ASUS-specific keyboard hotkeys */
--	if ((usage->hid & HID_USAGE_PAGE) == 0xff310000) {
-+	/* ASUS-specific keyboard hotkeys and led backlight */
-+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_ASUSVENDOR) {
- 		switch (usage->hid & HID_USAGE) {
- 		case 0x10: asus_map_key_clear(KEY_BRIGHTNESSDOWN);	break;
- 		case 0x20: asus_map_key_clear(KEY_BRIGHTNESSUP);		break;
- 		case 0x35: asus_map_key_clear(KEY_DISPLAY_OFF);		break;
- 		case 0x6c: asus_map_key_clear(KEY_SLEEP);		break;
--		case 0x7c: asus_map_key_clear(KEY_MICMUTE);		break;
-+		case 0x7c: asus_map_key_clear(KEY_F20);		break;
- 		case 0x82: asus_map_key_clear(KEY_CAMERA);		break;
- 		case 0x88: asus_map_key_clear(KEY_RFKILL);			break;
- 		case 0xb5: asus_map_key_clear(KEY_CALC);			break;
-@@ -771,16 +862,42 @@ static int asus_input_mapping(struct hid_device *hdev,
- 		/* ROG key */
- 		case 0x38: asus_map_key_clear(KEY_PROG1);		break;
- 
--		/* Fn+C ASUS Splendid */
--		case 0xba: asus_map_key_clear(KEY_PROG2);		break;
-+		default:
-+			if (drvdata->quirks & QUIRK_G752_KEYBOARD) {
-+				switch (usage->hid & HID_USAGE) {
-+				/* Fn+C ASUS Splendid */
-+				case 0xba: asus_map_key_clear(KEY_PROG2);		break;
- 
--		/* Fn+Space Power4Gear Hybrid */
--		case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
-+				/* Fn+Space Power4Gear Hybrid */
-+				case 0x5c: asus_map_key_clear(KEY_PROG3);		break;
- 
--		/* Fn+F5 "fan" symbol on FX503VD */
--		case 0x99: asus_map_key_clear(KEY_PROG4);		break;
-+				/* Fn+F5 "fan" symbol on FX503VD */
-+				case 0x99: asus_map_key_clear(KEY_PROG4);		break;
-+
-+				default:
-+					return -1;
-+				}
-+				break;
-+			}
-+
-+			/* device 0x1866, N-KEY Device specific */
-+			if (drvdata->quirks & QUIRK_ROG_NKEY_KEYBOARD) {
-+				switch (usage->hid & HID_USAGE) {
-+				/* Fn+Ret "Calc" symbol on device 0x1866, N-KEY Device */
-+				case 0x92: asus_map_key_clear(KEY_CALC);		break;
-+
-+				/* Fn+Left Aura mode previous */
-+				case 0xb2: asus_map_key_clear(KEY_KBDILLUM_MODE_PREV);	break;
-+
-+				/* Fn+Right Aura mode next */
-+				case 0xb3: asus_map_key_clear(KEY_KBDILLUM_MODE_NEXT);	break;
-+
-+				default:
-+					return -1;
-+				}
-+				break;
-+			}
- 
--		default:
- 			/* ASUS lazily declares 256 usages, ignore the rest,
- 			 * as some make the keyboard appear as a pointer device. */
- 			return -1;
-@@ -1126,6 +1243,9 @@ static const struct hid_device_id asus_devices[] = {
- 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
- 		USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD),
- 	  QUIRK_USE_KBD_BACKLIGHT },
-+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
-+	    USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD),
-+	  QUIRK_USE_KBD_BACKLIGHT | QUIRK_ROG_NKEY_KEYBOARD },
- 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK,
- 		USB_DEVICE_ID_ASUSTEK_T100TA_KEYBOARD),
- 	  QUIRK_T100_KEYBOARD | QUIRK_NO_CONSUMER_USAGES },
-diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
-index 6f370e020feb..c9f930ddcfd7 100644
---- a/drivers/hid/hid-ids.h
-+++ b/drivers/hid/hid-ids.h
-@@ -190,6 +190,7 @@
- #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD1 0x1854
- #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD2 0x1837
- #define USB_DEVICE_ID_ASUSTEK_ROG_KEYBOARD3 0x1822
-+#define USB_DEVICE_ID_ASUSTEK_ROG_NKEY_KEYBOARD	0x1866
- #define USB_DEVICE_ID_ASUSTEK_FX503VD_KEYBOARD	0x1869
- 
- #define USB_VENDOR_ID_ATEN		0x0557
-diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
-index 897b8332a39f..05253cfe786c 100644
---- a/include/linux/platform_data/x86/asus-wmi.h
-+++ b/include/linux/platform_data/x86/asus-wmi.h
-@@ -27,6 +27,8 @@
- #define ASUS_WMI_METHODID_INIT		0x54494E49 /* INITialize */
- #define ASUS_WMI_METHODID_HKEY		0x59454B48 /* Hot KEY ?? */
- 
-+#define ASUS_WMI_METHODID_NOTIF		0x00100021 /* Notify method ?? */
-+
- #define ASUS_WMI_UNSUPPORTED_METHOD	0xFFFFFFFE
- 
- /* Wireless */
-diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
-index 0c2e27d28e0a..ca59f7d7a25e 100644
---- a/include/uapi/linux/input-event-codes.h
-+++ b/include/uapi/linux/input-event-codes.h
-@@ -772,6 +772,13 @@
- #define BTN_TRIGGER_HAPPY39		0x2e6
- #define BTN_TRIGGER_HAPPY40		0x2e7
- 
-+/*
-+ * Some keyboards have function keys associated with
-+ * changing the keyboard backlight modes, e.g, RGB patterns
-+ */
-+#define KEY_KBDILLUM_MODE_PREV	0x2ea
-+#define KEY_KBDILLUM_MODE_NEXT	0x2eb
-+
- /* We avoid low common keys in module aliases so they don't get huge. */
- #define KEY_MIN_INTERESTING	KEY_MUTE
- #define KEY_MAX			0x2ff
--- 
-2.26.2
-

reverse_eng/asus-fan-p1.patch

@@ -1,220 +0,0 @@
----
- .../ABI/testing/sysfs-platform-asus-wmi       |  10 ++
- drivers/platform/x86/asus-wmi.c               | 113 ++++++++++++++++++
- include/linux/platform_data/x86/asus-wmi.h    |   1 +
- 3 files changed, 124 insertions(+)
-
-diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
-index 9e99f2909612..1efac0ddb417 100644
---- a/Documentation/ABI/testing/sysfs-platform-asus-wmi
-+++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
-@@ -46,3 +46,13 @@ Description:
- 			* 0 - normal,
- 			* 1 - overboost,
- 			* 2 - silent
-+
-+What:		/sys/devices/platform/<platform>/throttle_thermal_policy
-+Date:		Dec 2019
-+KernelVersion:	5.6
-+Contact:	"Leonid Maksymchuk" <leonmaxx@gmail.com>
-+Description:
-+		Throttle thermal policy mode:
-+			* 0 - default,
-+			* 1 - overboost,
-+			* 2 - silent
-diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
-index 821b08e01635..f10ec9d745e5 100644
---- a/drivers/platform/x86/asus-wmi.c
-+++ b/drivers/platform/x86/asus-wmi.c
-@@ -61,6 +61,7 @@ MODULE_LICENSE("GPL");
- #define NOTIFY_KBD_BRTDWN		0xc5
- #define NOTIFY_KBD_BRTTOGGLE		0xc7
- #define NOTIFY_KBD_FBM			0x99
-+#define NOTIFY_KBD_TTP			0xae
- 
- #define ASUS_WMI_FNLOCK_BIOS_DISABLED	BIT(0)
- 
-@@ -81,6 +82,10 @@ MODULE_LICENSE("GPL");
- #define ASUS_FAN_BOOST_MODE_SILENT_MASK		0x02
- #define ASUS_FAN_BOOST_MODES_MASK		0x03
- 
-+#define ASUS_THROTTLE_THERMAL_POLICY_DEFAULT	0
-+#define ASUS_THROTTLE_THERMAL_POLICY_OVERBOOST	1
-+#define ASUS_THROTTLE_THERMAL_POLICY_SILENT	2
-+
- #define USB_INTEL_XUSB2PR		0xD0
- #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
- 
-@@ -198,6 +203,9 @@ struct asus_wmi {
- 	u8 fan_boost_mode_mask;
- 	u8 fan_boost_mode;
- 
-+	bool throttle_thermal_policy_available;
-+	u8 throttle_thermal_policy_mode;
-+
- 	// The RSOC controls the maximum charging percentage.
- 	bool battery_rsoc_available;
- 
-@@ -1724,6 +1732,98 @@ static ssize_t fan_boost_mode_store(struct device *dev,
- // Fan boost mode: 0 - normal, 1 - overboost, 2 - silent
- static DEVICE_ATTR_RW(fan_boost_mode);
- 
-+/* Throttle thermal policy ****************************************************/
-+
-+static int throttle_thermal_policy_check_present(struct asus_wmi *asus)
-+{
-+	u32 result;
-+	int err;
-+
-+	asus->throttle_thermal_policy_available = false;
-+
-+	err = asus_wmi_get_devstate(asus,
-+				    ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
-+				    &result);
-+	if (err) {
-+		if (err == -ENODEV)
-+			return 0;
-+		return err;
-+	}
-+
-+	if (result & ASUS_WMI_DSTS_PRESENCE_BIT)
-+		asus->throttle_thermal_policy_available = true;
-+
-+	return 0;
-+}
-+
-+static int throttle_thermal_policy_write(struct asus_wmi *asus)
-+{
-+	int err;
-+	u8 value;
-+	u32 retval;
-+
-+	value = asus->throttle_thermal_policy_mode;
-+
-+	err = asus_wmi_set_devstate(ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY,
-+				    value, &retval);
-+	if (err) {
-+		pr_warn("Failed to set throttle thermal policy: %d\n", err);
-+		return err;
-+	}
-+
-+	if (retval != 1) {
-+		pr_warn("Failed to set throttle thermal policy (retval): 0x%x\n",
-+			retval);
-+		return -EIO;
-+	}
-+
-+	return 0;
-+}
-+
-+static int throttle_thermal_policy_switch_next(struct asus_wmi *asus)
-+{
-+	u8 new_mode = asus->throttle_thermal_policy_mode + 1;
-+
-+	if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
-+		new_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
-+
-+	asus->throttle_thermal_policy_mode = new_mode;
-+	return throttle_thermal_policy_write(asus);
-+}
-+
-+static ssize_t throttle_thermal_policy_show(struct device *dev,
-+				   struct device_attribute *attr, char *buf)
-+{
-+	struct asus_wmi *asus = dev_get_drvdata(dev);
-+	u8 mode = asus->throttle_thermal_policy_mode;
-+
-+	return scnprintf(buf, PAGE_SIZE, "%d\n", mode);
-+}
-+
-+static ssize_t throttle_thermal_policy_store(struct device *dev,
-+				    struct device_attribute *attr,
-+				    const char *buf, size_t count)
-+{
-+	int result;
-+	u8 new_mode;
-+	struct asus_wmi *asus = dev_get_drvdata(dev);
-+
-+	result = kstrtou8(buf, 10, &new_mode);
-+	if (result < 0)
-+		return result;
-+
-+	if (new_mode > ASUS_THROTTLE_THERMAL_POLICY_SILENT)
-+		return -EINVAL;
-+
-+	asus->throttle_thermal_policy_mode = new_mode;
-+	throttle_thermal_policy_write(asus);
-+
-+	return count;
-+}
-+
-+// Throttle thermal policy: 0 - default, 1 - overboost, 2 - silent
-+static DEVICE_ATTR_RW(throttle_thermal_policy);
-+
- /* Backlight ******************************************************************/
- 
- static int read_backlight_power(struct asus_wmi *asus)
-@@ -2005,6 +2105,11 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
- 		return;
- 	}
- 
-+	if (asus->throttle_thermal_policy_available && code == NOTIFY_KBD_TTP) {
-+		throttle_thermal_policy_switch_next(asus);
-+		return;
-+	}
-+
- 	if (is_display_toggle(code) && asus->driver->quirks->no_display_toggle)
- 		return;
- 
-@@ -2155,6 +2260,7 @@ static struct attribute *platform_attributes[] = {
- 	&dev_attr_lid_resume.attr,
- 	&dev_attr_als_enable.attr,
- 	&dev_attr_fan_boost_mode.attr,
-+	&dev_attr_throttle_thermal_policy.attr,
- 	NULL
- };
- 
-@@ -2178,6 +2284,8 @@ static umode_t asus_sysfs_is_visible(struct kobject *kobj,
- 		devid = ASUS_WMI_DEVID_ALS_ENABLE;
- 	else if (attr == &dev_attr_fan_boost_mode.attr)
- 		ok = asus->fan_boost_mode_available;
-+	else if (attr == &dev_attr_throttle_thermal_policy.attr)
-+		ok = asus->throttle_thermal_policy_available;
- 
- 	if (devid != -1)
- 		ok = !(asus_wmi_get_devstate_simple(asus, devid) < 0);
-@@ -2437,6 +2545,10 @@ static int asus_wmi_add(struct platform_device *pdev)
- 	if (err)
- 		goto fail_fan_boost_mode;
- 
-+	err = throttle_thermal_policy_check_present(asus);
-+	if (err)
-+		goto fail_throttle_thermal_policy;
-+
- 	err = asus_wmi_sysfs_init(asus->platform_device);
- 	if (err)
- 		goto fail_sysfs;
-@@ -2521,6 +2633,7 @@ static int asus_wmi_add(struct platform_device *pdev)
- fail_input:
- 	asus_wmi_sysfs_exit(asus->platform_device);
- fail_sysfs:
-+fail_throttle_thermal_policy:
- fail_fan_boost_mode:
- fail_platform:
- 	kfree(asus);
-diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
-index 60249e22e844..d39fc658c320 100644
---- a/include/linux/platform_data/x86/asus-wmi.h
-+++ b/include/linux/platform_data/x86/asus-wmi.h
-@@ -58,6 +58,7 @@
- #define ASUS_WMI_DEVID_LIGHT_SENSOR	0x00050022 /* ?? */
- #define ASUS_WMI_DEVID_LIGHTBAR		0x00050025
- #define ASUS_WMI_DEVID_FAN_BOOST_MODE	0x00110018
-+#define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075
- 
- /* Misc */
- #define ASUS_WMI_DEVID_CAMERA		0x00060013
--- 
-2.24.0
-
-  

reverse_eng/asus-fan-p2.patch

@@ -1,37 +0,0 @@
----
- drivers/platform/x86/asus-wmi.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
-index f10ec9d745e5..469f1a852719 100644
---- a/drivers/platform/x86/asus-wmi.c
-+++ b/drivers/platform/x86/asus-wmi.c
-@@ -1780,6 +1780,15 @@ static int throttle_thermal_policy_write(struct asus_wmi *asus)
- 	return 0;
- }
- 
-+static int throttle_thermal_policy_set_default(struct asus_wmi *asus)
-+{
-+	if (!asus->throttle_thermal_policy_available)
-+		return 0;
-+
-+	asus->throttle_thermal_policy_mode = ASUS_THROTTLE_THERMAL_POLICY_DEFAULT;
-+	return throttle_thermal_policy_write(asus);
-+}
-+
- static int throttle_thermal_policy_switch_next(struct asus_wmi *asus)
- {
- 	u8 new_mode = asus->throttle_thermal_policy_mode + 1;
-@@ -2548,6 +2557,8 @@ static int asus_wmi_add(struct platform_device *pdev)
- 	err = throttle_thermal_policy_check_present(asus);
- 	if (err)
- 		goto fail_throttle_thermal_policy;
-+	else
-+		throttle_thermal_policy_set_default(asus);
- 
- 	err = asus_wmi_sysfs_init(asus->platform_device);
- 	if (err)
--- 
-2.24.0
-
-  

reverse_eng/dsl/G512LU-acpi-errors.txt

@@ -1,63 +0,0 @@
-[root@rog tmp]# cat /sys/firmware/acpi/tables/DSDT > dsdt.dat
-[root@rog tmp]# iasl -d dsdt.dat
-
-Intel ACPI Component Architecture
-ASL+ Optimizing Compiler/Disassembler version 20200717
-Copyright (c) 2000 - 2020 Intel Corporation
-
-File appears to be binary: found 97272 non-ASCII characters, disassembling
-Binary file appears to be a valid ACPI table, disassembling
-Input file dsdt.dat, Length 0x45955 (285013) bytes
-ACPI: DSDT 0x0000000000000000 045955 (v02 _ASUS_ Notebook 01072009 INTL 20160527)
-Pass 1 parse of [DSDT]
-ACPI Error: ^PCI0.LPCB.EC0_.ACNG: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^PCI0.LPCB.EC0.ACNG], AE_NOT_FOUND (20200717/dswload-495)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.NLIM: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.NLIM], AE_NOT_FOUND (20200717/dswload-495)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.TGPU: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.TGPU], AE_NOT_FOUND (20200717/dswload-495)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^^NPCF.PABS: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^^NPCF.PABS], AE_NOT_FOUND (20200717/dswload-495)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.CTGP: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.CTGP], AE_NOT_FOUND (20200717/dswload-495)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.TGPV: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.TGPV], AE_NOT_FOUND (20200717/dswload-495)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-Pass 2 parse of [DSDT]
-ACPI Error: ^PCI0.LPCB.EC0_.ACNG: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^PCI0.LPCB.EC0.ACNG], AE_NOT_FOUND (20200717/dswload2-479)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.NLIM: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.NLIM], AE_NOT_FOUND (20200717/dswload2-479)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.TGPU: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.TGPU], AE_NOT_FOUND (20200717/dswload2-479)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^^NPCF.PABS: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^^NPCF.PABS], AE_NOT_FOUND (20200717/dswload2-479)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.CTGP: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.CTGP], AE_NOT_FOUND (20200717/dswload2-479)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-ACPI Error: ^^PEG0.PEGP.TGPV: Path has too many parent prefixes (^) (20200717/nsaccess-604)
-Firmware Error (ACPI): Could not resolve symbol [^^PEG0.PEGP.TGPV], AE_NOT_FOUND (20200717/dswload2-479)
-ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200717/psobject-372)
-Parsing Deferred Opcodes (Methods/Buffers/Packages/Regions)
-
-Parsing completed
- Warning - Emitting ASL code "External (ESPC)"
-           This is a conflicting declaration with some other declaration within the ASL code.
-           This external declaration may need to be deleted in order to recompile the dsl file.
-
- Warning - Emitting ASL code "External (PSON)"
-           This is a conflicting declaration with some other declaration within the ASL code.
-           This external declaration may need to be deleted in order to recompile the dsl file.
-
-Disassembly completed
-ASL Output:    dsdt.dsl - 2006627 bytes
-[root@rog tmp]# 

reverse_eng/g512lu/details

@@ -1,4 +0,0 @@
-cat /sys/class/dmi/id/product_name:ROG Strix G512LU_G512LU
-cat /sys/class/dmi/id/product_family: ROG Strix
-cat /sys/class/dmi/id/board_name:G512LU
-

reverse_eng/g512lu/usbhid.log

@@ -1,28 +0,0 @@
-001:002:002:DESCRIPTOR         1593779817.131018
- 06 31 FF 09 76 A1 01 85 5A 19 00 2A FF 00 15 00
- 26 FF 00 75 08 95 05 81 00 19 00 2A FF 00 15 00
- 26 FF 00 75 08 95 3F B1 00 C0 05 0C 09 01 A1 01
- 85 02 19 00 2A 3C 02 15 00 26 3C 02 75 10 95 02
- 81 00 C0 06 31 FF 09 79 A1 01 85 5D 19 00 2A FF
- 00 15 00 26 FF 00 75 08 95 1F 81 00 19 00 2A FF
- 00 15 00 26 FF 00 75 08 95 3F 91 00 19 00 2A FF
- 00 15 00 26 FF 00 75 08 95 3F B1 00 C0 06 31 FF
- 09 80 A1 01 85 5E 19 00 2A FF 00 15 00 26 FF 00
- 75 08 95 05 81 00 19 00 2A FF 00 15 00 26 FF 00
- 75 08 95 3F B1 00 C0
-
-001:002:001:DESCRIPTOR         1593779817.133253
- 05 01 09 06 A1 01 85 09 75 01 95 08 05 07 19 E0
- 29 E7 15 00 25 01 81 02 95 08 75 01 81 03 95 05
- 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03
- 95 F0 75 01 05 07 19 00 29 EF 15 00 25 01 81 02
- C0
-
-001:002:000:DESCRIPTOR         1593779817.134955
- 05 01 09 06 A1 01 85 01 75 01 95 08 05 07 19 E0
- 29 E7 15 00 25 01 81 02 95 01 75 08 81 03 95 05
- 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03
- 95 06 75 08 15 00 26 FF 00 05 07 19 00 2A FF 00
- 81 00 95 C0 75 01 05 07 19 00 29 EF 15 00 25 01
- 81 02 C0
-

reverse_eng/g531/board_details

@@ -1,6 +0,0 @@
-Product name: ROG Strix G531GT_G531GT
-Product family: ROG Strix
-Board name: G531GT
-
-lsusb | grep 0b05: Bus 001 Device 004: ID 0b05:1866 ASUSTek Computer, Inc. N-KEY Device
-