Fast (~1-3s) endpoint that gathers network info about a device
before full stream discovery. Runs ping first, then parallel probes.
Features:
- Ping with ICMP + TCP fallback (works without root)
- Reverse DNS hostname lookup
- ARP table MAC address + OUI vendor identification (2403 entries, 51 camera vendors)
- mDNS HomeKit detection (camera/doorbell, paired status)
- Extensible Prober interface for adding new probe types
- 3-second overall timeout, parallel execution
Response includes "type" field:
- "unreachable" - device not responding
- "standard" - normal IP camera (RTSP/HTTP/ONVIF flow)
- "homekit" - Apple HomeKit camera (PIN pairing flow)
Add padding to overcome aiohttp 64KB buffer in HA Supervisor.
Problem:
- HA Supervisor uses aiohttp with 64KB StreamResponse buffer
- Small SSE events (~200-500 bytes) were buffered until connection closed
- Users saw all streams appear at once instead of real-time updates
Solution:
- Detect Ingress mode via X-Ingress-Path header
- Add 64KB SSE comment padding to fill proxy buffers
- Increase progress interval to 3 sec in Ingress mode (reduce traffic)
- Normal mode (Docker/direct) unchanged - works exactly as before
Traffic impact:
- Normal mode: ~17KB per scan (unchanged)
- Ingress mode: ~2-3MB per scan (acceptable for real-time updates)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Split discovered streams into Recommended (FFMPEG, ONVIF) and Alternative groups
- Add Main/Sub/Other classification within Recommended based on resolution:
- Main: streams with width >= 720px (after clustering analysis)
- Sub: streams with width < 720px or lower cluster
- Other: streams without resolution info
- Implement smart auto-collapse based on selection mode:
- Main selection: shows Recommended/Main, collapses rest
- Sub selection: shows Recommended/Sub, collapses rest
- Falls back to showing all if target category is empty
- Add collapsible groups/subgroups with chevron toggles
- User manual expand/collapse preserved until mode change
- Add stream count badges to all group headers
- Add buildRtspPath() helper method to conditionally append ?mp4
- Only BUBBLE stream types get ?mp4 suffix for proper recording
- Other stream types (RTSP, ONVIF, JPEG, etc.) remain unchanged
- Handles both single and dual-stream configurations correctly
- Update docker run command to use --network host
- Update docker-compose.yml to use network_mode: host
- Update docker-compose.full.yml to use network_mode: host
- Remove port mappings as they are not needed with host network
- Fixed channel numbering for Hikvision-style cameras (reported by @sergbond_com)
- Added universal [CHANNEL+1] placeholder support
- Supports both 0-based and 1-based channel numbering
- Updated 14 camera brands with universal patterns
- Fixed brand+model search matching
- Removed invalid test data from database
- Removed entry with embedded credentials and IP address
- Entry contained: rtsp://huntertech:Superuser01!@10.0.55.11:554
- This was likely test data that accidentally got committed
- Model "Bullet-4K" entry removed from database
- Added 5 new URL patterns with [CHANNEL] placeholder
- Supports channels 0-255 for multi-camera DVR/NVR systems
- Patterns include /Streaming/Channels/[CHANNEL]01, [CHANNEL]02
- ISAPI format support with dynamic channels
- All existing hardcoded patterns preserved for compatibility
Problem:
- WriteTimeout was 30 seconds
- Progress only sent when values changed
- Long ffprobe tests (7-8s each) could cause 30+ seconds without writes
- Result: "curl: (18) transfer closed with outstanding read data remaining"
Solution:
- Increase WriteTimeout from 30s to 5 minutes
- Send progress every 1 second (instead of 3 seconds)
- Always send progress, even if values unchanged
- Guarantees write every second, preventing timeout
Changes:
- internal/config/config.go: WriteTimeout 30s → 5min
- internal/camera/discovery/scanner.go:
- Progress ticker 3s → 1s
- Remove "only if changed" check
- Always send progress to keep connection alive
Testing:
- HiWatch camera with 591 streams: Previously timed out at ~338/591
- Should now complete all 591 streams without timeout
- Add tooltips for all 7 stream types: FFMPEG, ONVIF, MJPEG, HLS, BUBBLE, JPEG, HTTP_VIDEO
- Each tooltip explains protocol features, use cases, and compatibility
- Add BUBBLE protocol icon and detailed description (XMEye/DVRIP cameras)
- Update mock streams to show one example of each type
- Remove unused mock-data.js file to reduce confusion
- Add CSS styles for stream type info icons
- Add informational tooltips to all configuration fields
- Reorder tabs: Frigate first, then Go2RTC, then URL
- Hide Copy/Download buttons on Frigate tab until config is generated
- Auto-fill username field with "admin" as default value
- Smart pre-fill network address based on server IP (first 3 octets)
- Add tooltips for Main Stream, Sub Stream, and all buttons
- Improve user guidance throughout the configuration flow
Добавлены информационные тултипы для всех полей формы настройки камеры с подробными описаниями, примерами использования и рекомендациями. Улучшает пользовательский опыт и помогает пользователям правильно заполнить форму.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Replace carousel navigation with scrollable vertical list
- Remove statistics counters (Tested/Found/Remaining)
- Add collapsible stream details with expand/collapse toggle
- Show stream URL preview in header, full URL in details
- Position URL below stream type badge for better readability
- Add new StreamList component replacing StreamCarousel
- Update CSS with improved layout and hover effects
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Restored stats block (Tested, Found, Remaining) that was accidentally
removed when adding mock mode functionality. This fixes JavaScript
errors where main.js tried to update non-existent DOM elements.
- Add mock API classes for camera search and stream discovery
- Add mock mode toggle via ?mock=true URL parameter
- Add visual mock mode indicator badge
- Add dev-server.sh script for local development
- Mock data includes 10 diverse streams (FFMPEG, ONVIF, JPEG, MJPEG, HLS, HTTP_VIDEO)
- Add mock data module with simulated camera search and stream discovery
- Enable mock mode via ?mock=true URL parameter
- Show MOCK MODE indicator when enabled
- Remove statistics cards from discovery screen, keep only progress bar
- Mock mode works independently from Go backend for easier UI testing
- Remove new URL() construction with window.location.origin
- Use simple relative path like camera-search API
- Fixes stream discovery in HA Ingress environment
- Maintains compatibility with direct Docker installations
- Version bump to 1.0.3
- Change absolute API paths to relative paths in camera-search.js
- Change absolute API paths to relative paths in stream-discovery.js
- Fixes resource loading in HA Ingress environment
- Maintains compatibility with direct Docker installations
- Version bump to 1.0.2
- Change absolute paths (/css/, /js/) to relative paths (css/, js/)
- Maintains compatibility with direct Docker installations
- Fixes resource loading in HA Ingress environment
- API calls remain unchanged and work correctly
Features:
- Multi-arch support (aarch64, amd64, armv7)
- WebUI integration with Home Assistant
- Ingress support for seamless integration
- Automated builds via GitHub Actions
- Comprehensive documentation (EN/RU)
- Health check monitoring
- Configurable through HA UI
- Remove verbose API endpoints and example requests from startup output
- Show actual local network IP instead of localhost
- Add clickable URL support with ANSI OSC 8 hyperlinks
- Dynamically detect port from configuration
- Clean, minimal output for better user experience
JavaScript fixes:
- Fix Invalid URL error in stream-discovery.js by adding window.location.origin as base URL
- Fix SSE race condition: ensure all stream_found events sent before complete event
- Comment unused eventType variable in stream-discovery.js
- Comment unused FrigateGenerator import in config-panel.js
- Fix quote style (double to single quotes)
Go fixes:
- Add sync.WaitGroup for result collector to prevent premature SSE closure
- Add logging for stream_found events
- Fix ERR_INCOMPLETE_CHUNKED_ENCODING by waiting for all streams to be sent
ESLint setup:
- Add ESLint v8.57.1 with .eslintrc.cjs config for ES2022 modules
- Add npm scripts for lint and lint:fix
- Update .gitignore for node_modules and package-lock.json
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Fix critical scanner.go bug: ineffective break in select (SA4011)
Use labeled break to properly exit loop on context cancellation
- Add error checking for all file.Close() and resp.Body.Close()
Prevent resource leaks in loader, onvif_simple, and tester
- Add error checking for fmt.Sscanf() calls in tester.go
Prevent silent parse failures for FPS and bitrate extraction
- Add error checking for all SSE streamWriter calls
Explicit ignore with _ = for SendJSON and SendError
- Remove unused sync.RWMutex field from SearchEngine
- Refactor if/else to switch for CodecType (staticcheck QF1003)
More idiomatic Go code in stream tester
All 20 linter issues resolved. Code compiles and runs correctly.
eduard256
eduard256
eduard256