Issue #128 - add motion_off_delay

README-fr.md

@@ -55,6 +55,7 @@ Ce composant personnalisé pour Home Assistant est une mise à niveau et est une
 
 
 > ![Nouveau](https://github.com/jmcollin78/versatile_thermostat/blob/main/images/new-icon.png?raw=true) _*Nouveautés*_
+> * **Release 3.6**: Ajout du paramètre `motion_off_delay` pour la gestion de l'activité.
 > * **Release 3.5**: Plusieurs thermostats sont possibles en "thermostat over climate" mode [#113](https://github.com/jmcollin78/versatile_thermostat/issues/113)
 > * **Release 3.4**: bug fix et exposition des preset temperatures pour le mode AC [#103](https://github.com/jmcollin78/versatile_thermostat/issues/103)
 > * **Release 3.3**: ajout du mode Air Conditionné (AC). Cette fonction vous permet d'utiliser le mode AC de votre thermostat sous-jacent. Pour l'utiliser, vous devez cocher l'option "Uitliser le mode AC" et définir les valeurs de température pour les presets et pour les presets en cas d'absence
@@ -242,17 +243,20 @@ Si vous avez choisi la fonctionnalité ```Avec détection de mouvement```, cliqu
 Nous allons maintenant voir comment configurer le nouveau mode Activité.
 Ce dont nous avons besoin:
 - un **capteur de mouvement**. ID d'entité d'un capteur de mouvement. Les états du capteur de mouvement doivent être « on » (mouvement détecté) ou « off » (aucun mouvement détecté)
-- une durée de **délai de mouvement** (en secondes) définissant combien de temps nous attendons la confirmation du mouvement avant de considérer le mouvement
+- une durée de **délai de mouvement** (en secondes) définissant combien de temps nous attendons la confirmation du mouvement avant de considérer le mouvement. Ce paramètre peut être supérieur à la temporision de votre détecteur de mouvement, sinon la détection se fera à chaque mouvement signalé par le détecteur,
+- une durée de fin **délai de mouvement** (en secondes) définissant combien de temps nous attendons la confirmation d'une fin de mouvement avant de ne plus considérer le mouvement.
 - un **préréglage de "mouvement" **. Nous utiliserons la température de ce préréglage lorsqu'une activité sera détectée.
 - un **préréglage "pas de mouvement"**. Nous utiliserons la température de ce deuxième préréglage lorsqu'aucune activité n'est détectée.
 
 Alors imaginons que nous voulions avoir le comportement suivant :
-- nous avons une pièce avec un thermostat réglé en mode activité, le mode "mouvement" choisi est confort (21.5C), le mode "pas de mouvement" choisi est Eco (18.5C) et la temporisation du mouvement est de 5 min.
-- la pièce est vide depuis un moment (aucune activité détectée), la température de cette pièce est de 18,5 C
-- quelqu'un entre dans la pièce, une activité est détectée la température est fixée à 21,5 C
-- la personne quitte la chambre, au bout de 5 min la température est ramenée à 18,5 C
+- nous avons une pièce avec un thermostat réglé en mode activité, le mode "mouvement" choisi est confort (21,5°C), le mode "pas de mouvement" choisi est Eco (18.5°C) et la temporisation du mouvement est de 30 sec lors de la détection et de 5 minutes sur fin de détection.
+- la pièce est vide depuis un moment (aucune activité détectée), la température de cette pièce est de 18,5°
+- quelqu'un entre dans la pièce, une activité est détectée si le mouvement est présent pendant au moins 30 sec. La température passe alors à 21,5°
+- si le mouvement est présent pendant moins de 30 sec (passage rapide), la température reste sur 18,5°,
+- imaginons que la température soit passée sur 21,5°, lorsque la personne quitte la pièce, au bout de 5 min la température est ramenée à 18,5°.
+- si la personne revient avant les 5 minutes, la température reste sur 21,5°
 
-Pour que cela fonctionne, le thermostat climatique doit être en mode préréglé « Activité ».
+Pour que cela fonctionne, le thermostat doit être en mode préréglé « Activité ».
 
 > ![Astuce](https://github.com/jmcollin78/versatile_thermostat/blob/main/images/tips.png?raw=true) _*Notes*_
     1. Sachez que comme pour les autres modes prédéfinis, ``Activity`` ne sera proposé que s'il est correctement configuré. En d'autres termes, les 4 clés de configuration doivent être définies si vous souhaitez voir l'activité dans l'interface de l'assistant domestique
@@ -354,7 +358,8 @@ Voir [exemple de réglages](#examples-tuning) pour avoir des exemples de réglag
 | ``window_auto_close_threshold`` | Seuil bas de chute de température pour la fin de détection automatique (en °/min) | X | X |
 | ``window_auto_max_duration`` | Durée maximum d'une extinction automatique (en min) | X | X |
 | ``motion_sensor_entity_id`` | Détecteur de mouvement entity id | X | X |
-| ``motion_delay`` | Délai avant changement (seconds) | X | X |
+| ``motion_delay`` | Délai avant prise en compte du mouvement (seconds) | X | X |
+| ``motion_off_delay`` | Délai avant prise en compte de la fin de mouvement (seconds) | X | X |
 | ``motion_preset`` | Preset à utiliser si mouvement détecté | X | X |
 | ``no_motion_preset`` | Preset à utiliser si pas de mouvement détecté | X | X |
 | ``power_sensor_entity_id`` | Capteur de puissance totale (entity id) | X | X |

README.md

@@ -54,6 +54,7 @@
 This custom component for Home Assistant is an upgrade and is a complete rewrite of the component "Awesome thermostat" (see [Github](https://github.com/dadge/awesome_thermostat)) with addition of features.
 
 >![New](https://github.com/jmcollin78/versatile_thermostat/blob/main/images/new-icon.png?raw=true) _*News*_
+> * **Release 3.6**: Add a `motion_off_delay` parameter for activity management,
 > * **Release 3.5**: Multiple thermostats when using "thermostat over another thermostat" mode [#113](https://github.com/jmcollin78/versatile_thermostat/issues/113)
 > * **Release 3.4**: bug fixes and expose preset temperatures for AC mode [#103](https://github.com/jmcollin78/versatile_thermostat/issues/103)
 > * **Release 3.3**: add the Air Conditionned mode (AC). This feature allow to use the eventual AC mode of your underlying climate entity. You have to check the "Use AC mode" checkbox in configuration and give preset temperature value for AC mode and AC mode when absent if absence is configured
@@ -228,15 +229,17 @@ We will now see how to configure the new Activity mode.
 What we need:
 - a **motion sensor**. The entity id of a motion sensor. Motion sensor states should be 'on' (motion detected) or 'off' (no motion detected)
 - a **motion delay** (in seconds) duration defining how long we wait for motion confirmation before considering the motion
+- a **end of motion delay** (in seconds) duration defining how long we wait for end of motion confirmation before considering the end of motion
 - a **target "motion" preset**. We will used the temperature of this preset when an activity is detected.
 - a **target "no motion" preset**. We will used the temperature of this second preset when no activity is detected.
 
-So imagine we want to have the following behavior :
-- we have room with a thermostat set in activity mode, the "motion" mode chosen is comfort (21.5C), the "no motion" mode chosen is Eco (18.5 C) and the motion delay is 5 min.
-- the room is empty for a while (no activity detected), the temperature of this room is 18.5 C
-- somebody enters into the room, an activity is detected the temperature is set to 21.5 C
-- the person leaves the room, after 5 min the temperature is set back to 18.5 C
-
+- we have a room with a thermostat set to activity mode, the "movement" mode chosen is comfort (21.5°C), the "no movement" mode chosen is Eco (18.5°C) and the movement delay is 30 sec during detection and 5 minutes at the end of detection.
+- the room has been empty for a while (no activity detected), the temperature of this room is 18.5°
+- someone enters the room, activity is detected if movement is present for at least 30 seconds. The temperature then rises to 21.5°
+- if the movement is present for less than 30 seconds (rapid passage), the temperature remains at 18.5°,
+- imagine that the temperature has risen to 21.5°, when the person leaves the room, after 5 minutes the temperature is reduced to 18.5°.
+- if the person returns before 5 minutes, the temperature remains at 21.5°
+  
 For this to work, the climate thermostat should be in ``Activity`` preset mode.
 
 > ![Tip](https://github.com/jmcollin78/versatile_thermostat/blob/main/images/tips.png?raw=true)  _*Notes*_
@@ -339,7 +342,8 @@ See [example tuning](#examples-tuning) for common tuning examples
 | ``window_auto_close_threshold`` | Temperature increase threshold for end of automatic detection (in °/min) | X | X |
 | ``window_auto_max_duration`` | Maximum duration of automatic window open detection (in min) | X | X |
 | ``motion_sensor_entity_id`` | Motion sensor entity id | X | X |
-| ``motion_delay`` | Motion delay (seconds) | X | X |
+| ``motion_delay`` | Delay before considering the motion (seconds) | X | X |
+| ``motion_off_delay`` | Delay before considering the end of motion (seconds) | X | X |
 | ``motion_preset`` | Preset to use when motion is detected | X | X |
 | ``no_motion_preset`` | Preset to use when no motion is detected | X | X |
 | ``power_sensor_entity_id`` | Power sensor entity id | X | X |

custom_components/versatile_thermostat/climate.py

@@ -95,6 +95,7 @@ from .const import (
     CONF_WINDOW_AUTO_MAX_DURATION,
     CONF_MOTION_SENSOR,
     CONF_MOTION_DELAY,
+    CONF_MOTION_OFF_DELAY,
     CONF_MOTION_PRESET,
     CONF_NO_MOTION_PRESET,
     CONF_DEVICE_POWER,
@@ -399,6 +400,10 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
 
         self._motion_sensor_entity_id = entry_infos.get(CONF_MOTION_SENSOR)
         self._motion_delay_sec = entry_infos.get(CONF_MOTION_DELAY)
+        self._motion_off_delay_sec = entry_infos.get(CONF_MOTION_OFF_DELAY)
+        if not self._motion_off_delay_sec:
+            self._motion_off_delay_sec = self._motion_delay_sec
+
         self._motion_preset = entry_infos.get(CONF_MOTION_PRESET)
         self._no_motion_preset = entry_infos.get(CONF_NO_MOTION_PRESET)
         self._motion_on = (
@@ -1532,7 +1537,7 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
                     self.hass,
                     self._motion_sensor_entity_id,
                     new_state.state,
-                    timedelta(seconds=self._motion_delay_sec),
+                    timedelta(seconds=delay),
                 )
             except ConditionError:
                 long_enough = False
@@ -1567,8 +1572,11 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
         if self._motion_call_cancel:
             self._motion_call_cancel()
             self._motion_call_cancel = None
+
+        # Delay
+        delay = self._motion_delay_sec if new_state.state == STATE_ON else self._motion_off_delay_sec
         self._motion_call_cancel = async_call_later(
-            self.hass, timedelta(seconds=self._motion_delay_sec), try_motion_condition
+            self.hass, timedelta(seconds=delay), try_motion_condition
         )
 
         # For testing purpose we need to access the inner function

custom_components/versatile_thermostat/config_flow.py

@@ -55,6 +55,7 @@ from .const import (
     CONF_WINDOW_AUTO_OPEN_THRESHOLD,
     CONF_MOTION_SENSOR,
     CONF_MOTION_DELAY,
+    CONF_MOTION_OFF_DELAY,
     CONF_MOTION_PRESET,
     CONF_NO_MOTION_PRESET,
     CONF_DEVICE_POWER,
@@ -292,6 +293,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
                     ),
                 ),
                 vol.Optional(CONF_MOTION_DELAY, default=30): cv.positive_int,
+                vol.Optional(CONF_MOTION_OFF_DELAY, default=300): cv.positive_int,
                 vol.Optional(CONF_MOTION_PRESET, default="comfort"): vol.In(
                     CONF_PRESETS_SELECTIONABLE
                 ),

custom_components/versatile_thermostat/const.py

@@ -49,6 +49,7 @@ CONF_CYCLE_MIN = "cycle_min"
 CONF_PROP_FUNCTION = "proportional_function"
 CONF_WINDOW_DELAY = "window_delay"
 CONF_MOTION_DELAY = "motion_delay"
+CONF_MOTION_OFF_DELAY = "motion_off_delay"
 CONF_MOTION_PRESET = "motion_preset"
 CONF_NO_MOTION_PRESET = "no_motion_preset"
 CONF_TPI_COEF_INT = "tpi_coef_int"

custom_components/versatile_thermostat/strings.json

@@ -92,7 +92,15 @@
         "description": "Motion sensor management. Preset can switch automatically depending of a motion detection\nLeave corresponding entity_id empty if not used.\nmotion_preset and no_motion_preset should be set to the corresponding preset name",
         "data": {
           "motion_sensor_entity_id": "Motion sensor entity id",
-          "motion_delay": "Motion delay (seconds)",
+          "motion_delay": "Activation delay",
+          "motion_off_delay": "Deactivation delay",
+          "motion_preset": "Motion preset",
+          "no_motion_preset": "No motion preset"
+        },
+        "data_description": {
+          "motion_sensor_entity_id": "The entity id of the motion sensor",
+          "motion_delay": "Motion activation activation delay (seconds)",
+          "motion_off_delay": "Motion deactivation delay (seconds)",
           "motion_preset": "Preset to use when motion is detected",
           "no_motion_preset": "Preset to use when no motion is detected"
         }
@@ -237,7 +245,15 @@
         "description": "Motion sensor management. Preset can switch automatically depending of a motion detection\nLeave corresponding entity_id empty if not used.\nmotion_preset and no_motion_preset should be set to the corresponding preset name",
         "data": {
           "motion_sensor_entity_id": "Motion sensor entity id",
-          "motion_delay": "Motion delay (seconds)",
+          "motion_delay": "Activation delay",
+          "motion_off_delay": "Deactivation delay",
+          "motion_preset": "Motion preset",
+          "no_motion_preset": "No motion preset"
+        },
+        "data_description": {
+          "motion_sensor_entity_id": "The entity id of the motion sensor",
+          "motion_delay": "Motion activation activation delay (seconds)",
+          "motion_off_delay": "Motion deactivation delay (seconds)",
           "motion_preset": "Preset to use when motion is detected",
           "no_motion_preset": "Preset to use when no motion is detected"
         }

custom_components/versatile_thermostat/tests/const.py

@@ -40,6 +40,7 @@ from custom_components.versatile_thermostat.const import (
     CONF_WINDOW_AUTO_MAX_DURATION,
     CONF_MOTION_SENSOR,
     CONF_MOTION_DELAY,
+    CONF_MOTION_OFF_DELAY,
     CONF_MOTION_PRESET,
     CONF_NO_MOTION_PRESET,
     CONF_POWER_SENSOR,
@@ -136,6 +137,7 @@ MOCK_WINDOW_AUTO_CONFIG = {
 MOCK_MOTION_CONFIG = {
     CONF_MOTION_SENSOR: "input_boolean.motion_sensor",
     CONF_MOTION_DELAY: 10,
+    CONF_MOTION_OFF_DELAY: 30,
     CONF_MOTION_PRESET: PRESET_COMFORT,
     CONF_NO_MOTION_PRESET: PRESET_ECO,
 }

custom_components/versatile_thermostat/tests/test_config_flow.py

@@ -157,38 +157,6 @@ async def test_user_config_flow_over_climate(hass: HomeAssistant, skip_hass_stat
         result["flow_id"], user_input=MOCK_PRESETS_CONFIG
     )
 
-    # assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
-    # assert result["step_id"] == "window"
-    # assert result["errors"] == {}
-
-    # result = await hass.config_entries.flow.async_configure(
-    #     result["flow_id"], user_input=MOCK_WINDOW_CONFIG
-    # )
-
-    # assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
-    # assert result["step_id"] == "motion"
-    # assert result["errors"] == {}
-
-    # result = await hass.config_entries.flow.async_configure(
-    #     result["flow_id"], user_input=MOCK_MOTION_CONFIG
-    # )
-
-    # assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
-    # assert result["step_id"] == "power"
-    # assert result["errors"] == {}
-
-    # result = await hass.config_entries.flow.async_configure(
-    #     result["flow_id"], user_input=MOCK_POWER_CONFIG
-    # )
-
-    # assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
-    # assert result["step_id"] == "presence"
-    # assert result["errors"] == {}
-
-    # result = await hass.config_entries.flow.async_configure(
-    #     result["flow_id"], user_input=MOCK_PRESENCE_CONFIG
-    # )
-
     assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
     assert result["step_id"] == "advanced"
     assert result["errors"] == {}

custom_components/versatile_thermostat/tests/test_movement.py

@@ -43,10 +43,11 @@ async def test_movement_management_time_not_enough(
             CONF_TPI_COEF_INT: 0.3,
             CONF_TPI_COEF_EXT: 0.01,
             CONF_MINIMAL_ACTIVATION_DELAY: 30,
-            CONF_SECURITY_DELAY_MIN: 5,
+            CONF_SECURITY_DELAY_MIN: 10,
             CONF_SECURITY_MIN_ON_PERCENT: 0.3,
             CONF_MOTION_SENSOR: "binary_sensor.mock_motion_sensor",
-            CONF_MOTION_DELAY: 0,  # important to not been obliged to wait
+            CONF_MOTION_DELAY: 10,  # important to not been obliged to wait
+            CONF_MOTION_OFF_DELAY: 30,
             CONF_MOTION_PRESET: "boost",
             CONF_NO_MOTION_PRESET: "comfort",
             CONF_PRESENCE_SENSOR: "binary_sensor.mock_presence_sensor",
@@ -61,7 +62,7 @@ async def test_movement_management_time_not_enough(
     tz = get_tz(hass)  # pylint: disable=invalid-name
     now: datetime = datetime.now(tz=tz)
 
-    # start heating, in boost mode. We block the control_heating to avoid running a cycle
+    # start heating, in boost mode, when someone is present. We block the control_heating to avoid running a cycle
     with patch(
         "custom_components.versatile_thermostat.climate.VersatileThermostat._async_control_heating"
     ):
@@ -75,14 +76,14 @@ async def test_movement_management_time_not_enough(
         assert entity.motion_state is None
         assert entity.presence_state is None
 
-        event_timestamp = now - timedelta(minutes=4)
+        event_timestamp = now - timedelta(minutes=5)
         await send_temperature_change_event(entity, 18, event_timestamp)
         await send_ext_temperature_change_event(entity, 10, event_timestamp)
 
         await send_presence_change_event(entity, True, False, event_timestamp)
         assert entity.presence_state is "on"
 
-    # starts detecting motion
+    # starts detecting motion with time not enough
     with patch(
         "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
     ) as mock_send_event, patch(
@@ -91,17 +92,21 @@ async def test_movement_management_time_not_enough(
         "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
     ) as mock_heater_off, patch(
         "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
-        return_value=True,
+        return_value=False,
     ), patch(
         "homeassistant.helpers.condition.state", return_value=False
-    ):
-        event_timestamp = now - timedelta(minutes=3)
-        await send_motion_change_event(entity, True, False, event_timestamp)
+    ) as mock_condition:
+        event_timestamp = now - timedelta(minutes=4)
+        try_condition = await send_motion_change_event(entity, True, False, event_timestamp)
+
+        # Will return False -> we will stay on movement False
+        await try_condition(None)
 
         assert entity.hvac_mode is HVACMode.HEAT
         assert entity.preset_mode is PRESET_ACTIVITY
         # because no motion is detected yet
         assert entity.target_temperature == 18
+        # state is not changed if time is not enough
         assert entity.motion_state is None
         assert entity.presence_state is "on"
 
@@ -111,7 +116,65 @@ async def test_movement_management_time_not_enough(
         assert mock_heater_off.call_count == 0
         assert mock_send_event.call_count == 0
 
-    # stop detecting motion with confirmation of stop
+    # starts detecting motion with time enough this time
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        return_value=False,
+    ), patch(
+        "homeassistant.helpers.condition.state", return_value=True
+    ) as mock_condition:
+        event_timestamp = now - timedelta(minutes=3)
+        try_condition = await send_motion_change_event(entity, True, False, event_timestamp)
+
+        # Will return True -> we will switch to movement On
+        await try_condition(None)
+
+        assert entity.hvac_mode is HVACMode.HEAT
+        assert entity.preset_mode is PRESET_ACTIVITY
+        # because motion is detected yet
+        assert entity.target_temperature == 19
+        assert entity.motion_state is "on"
+        assert entity.presence_state is "on"
+
+    # stop detecting motion with off delay too low
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        return_value=True,
+    ) as mock_device_active, patch(
+        "homeassistant.helpers.condition.state", return_value=False
+    ) as mock_condition:
+        event_timestamp = now - timedelta(minutes=2)
+        try_condition = await send_motion_change_event(entity, False, True, event_timestamp)
+
+         # Will return False -> we will stay to movement On
+        await try_condition(None)
+
+        assert entity.hvac_mode is HVACMode.HEAT
+        assert entity.preset_mode is PRESET_ACTIVITY
+        # because no motion is detected yet
+        assert entity.target_temperature == 19
+        assert entity.motion_state is "on"
+        assert entity.presence_state is "on"
+
+        assert mock_send_event.call_count == 0
+        # The heater must heat now
+        assert mock_heater_on.call_count == 1
+        assert mock_heater_off.call_count == 0
+        assert mock_send_event.call_count == 0
+
+    # stop detecting motion with off delay enough long
     with patch(
         "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
     ) as mock_send_event, patch(
@@ -124,8 +187,11 @@ async def test_movement_management_time_not_enough(
     ) as mock_device_active, patch(
         "homeassistant.helpers.condition.state", return_value=True
     ) as mock_condition:
-        event_timestamp = now - timedelta(minutes=2)
-        await send_motion_change_event(entity, False, True, event_timestamp)
+        event_timestamp = now - timedelta(minutes=1)
+        try_condition = await send_motion_change_event(entity, False, True, event_timestamp)
+
+         # Will return True -> we will switch to movement Off
+        await try_condition(None)
 
         assert entity.hvac_mode is HVACMode.HEAT
         assert entity.preset_mode is PRESET_ACTIVITY
@@ -135,9 +201,8 @@ async def test_movement_management_time_not_enough(
         assert entity.presence_state is "on"
 
         assert mock_send_event.call_count == 0
-        # Change is not confirmed
+        # The heater must stop heating now
         assert mock_heater_on.call_count == 0
-        # Because device is active
         assert mock_heater_off.call_count == 1
         assert mock_send_event.call_count == 0
 

custom_components/versatile_thermostat/translations/en.json

@@ -92,7 +92,15 @@
         "description": "Motion sensor management. Preset can switch automatically depending of a motion detection\nLeave corresponding entity_id empty if not used.\nmotion_preset and no_motion_preset should be set to the corresponding preset name",
         "data": {
           "motion_sensor_entity_id": "Motion sensor entity id",
-          "motion_delay": "Motion delay (seconds)",
+          "motion_delay": "Activation delay",
+          "motion_off_delay": "Deactivation delay",
+          "motion_preset": "Motion preset",
+          "no_motion_preset": "No motion preset"
+        },
+        "data_description": {
+          "motion_sensor_entity_id": "The entity id of the motion sensor",
+          "motion_delay": "Motion activation activation delay (seconds)",
+          "motion_off_delay": "Motion deactivation delay (seconds)",
           "motion_preset": "Preset to use when motion is detected",
           "no_motion_preset": "Preset to use when no motion is detected"
         }
@@ -237,7 +245,15 @@
         "description": "Motion sensor management. Preset can switch automatically depending of a motion detection\nLeave corresponding entity_id empty if not used.\nmotion_preset and no_motion_preset should be set to the corresponding preset name",
         "data": {
           "motion_sensor_entity_id": "Motion sensor entity id",
-          "motion_delay": "Motion delay (seconds)",
+          "motion_delay": "Activation delay",
+          "motion_off_delay": "Deactivation delay",
+          "motion_preset": "Motion preset",
+          "no_motion_preset": "No motion preset"
+        },
+        "data_description": {
+          "motion_sensor_entity_id": "The entity id of the motion sensor",
+          "motion_delay": "Motion activation activation delay (seconds)",
+          "motion_off_delay": "Motion deactivation delay (seconds)",
           "motion_preset": "Preset to use when motion is detected",
           "no_motion_preset": "Preset to use when no motion is detected"
         }

custom_components/versatile_thermostat/translations/fr.json

@@ -91,8 +91,16 @@
         "title": "Gestion de la détection de mouvement",
         "description": "Le preset s'ajuste automatiquement si un mouvement est détecté\nLaissez l'entity id vide si non utilisé.\n'Preset mouvement' et 'Preset sans mouvement' doivent être choisis avec les preset à utiliser.",
         "data": {
+          "motion_sensor_entity_id": "Détecteur de mouvement",
+          "motion_delay": "Délai d'activation",
+          "motion_off_delay": "Délai de désactivation",
+          "motion_preset": "Preset si mouvement",
+          "no_motion_preset": "Preset si pas de mouvement"
+        },
+        "data_description": {
           "motion_sensor_entity_id": "Détecteur de mouvement entity id",
-          "motion_delay": "Délai avant changement (seconds)",
+          "motion_delay": "Délai avant activation lorsqu'un mouvement est détecté (secondss)",
+          "motion_off_delai": "Délai avant désactivation lorsqu'aucun mouvement n'est détecté (secondes)",
           "motion_preset": "Preset à utiliser si mouvement détecté",
           "no_motion_preset": "Preset à utiliser si pas de mouvement détecté"
         }
@@ -237,8 +245,16 @@
         "title": "Gestion de la détection de mouvement",
         "description": "Le preset s'ajuste automatiquement si un mouvement est détecté\nLaissez l'entity id vide si non utilisé.\n'Preset mouvement' et 'Preset sans mouvement' doivent être choisis avec les preset à utiliser.",
         "data": {
+          "motion_sensor_entity_id": "Détecteur de mouvement",
+          "motion_delay": "Délai d'activation",
+          "motion_off_delay": "Délai de désactivation",
+          "motion_preset": "Preset si mouvement",
+          "no_motion_preset": "Preset si pas de mouvement"
+        },
+        "data_description": {
           "motion_sensor_entity_id": "Détecteur de mouvement entity id",
-          "motion_delay": "Délai avant changement (seconds)",
+          "motion_delay": "Délai avant activation lorsqu'un mouvement est détecté (secondss)",
+          "motion_off_delai": "Délai avant désactivation lorsqu'aucun mouvement n'est détecté (secondes)",
           "motion_preset": "Preset à utiliser si mouvement détecté",
           "no_motion_preset": "Preset à utiliser si pas de mouvement détecté"
         }

custom_components/versatile_thermostat/translations/it.json

@@ -93,6 +93,7 @@
         "data": {
           "motion_sensor_entity_id": "Entity id sensore di movimento",
           "motion_delay": "Ritardo in secondi prima che il rilevamento del sensore sia preso in considerazione",
+          "motion_off_delay": "Ritardo in secondi di disattivazione prima che del sensore sia preso in considerazione",
           "motion_preset": "Preset da utilizzare quando viene rilevato il movimento",
           "no_motion_preset": "Preset da utilizzare quando non viene rilevato il movimento"
         }
@@ -238,6 +239,7 @@
         "data": {
           "motion_sensor_entity_id": "Entity id sensore di movimento",
           "motion_delay": "Ritardo in secondi prima che il rilevamento del sensore sia preso in considerazione",
+          "motion_off_delay": "Ritardo in secondi di disattivazione prima che del sensore sia preso in considerazione",
           "motion_preset": "Preset da utilizzare quando viene rilevato il movimento",
           "no_motion_preset": "Preset da utilizzare quando non viene rilevato il movimento"
         }