Issue #467 - Always apply offset compensation (#567)

Co-authored-by: Jean-Marc Collin <jean-marc.collin-extern@renault.com>

custom_components/versatile_thermostat/base_thermostat.py

@@ -1654,9 +1654,28 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):
 
             if not long_enough:
                 _LOGGER.debug(
-                    "Motion delay condition is not satisfied. Ignore motion event"
+                    "Motion delay condition is not satisfied (the sensor have change its state during the delay). Check motion sensor state"
                 )
-            else:
+                # Get sensor current state
+                motion_state = self.hass.states.get(self._motion_sensor_entity_id)
+                _LOGGER.debug(
+                    "%s - motion_state=%s, new_state.state=%s",
+                    self,
+                    motion_state.state,
+                    new_state.state,
+                )
+                if (
+                    motion_state.state == new_state.state
+                    and new_state.state == STATE_ON
+                ):
+                    _LOGGER.debug(
+                        "%s - the motion sensor is finally 'on' after the delay", self
+                    )
+                    long_enough = True
+                else:
+                    long_enough = False
+
+            if long_enough:
                 _LOGGER.debug("%s - Motion delay condition is satisfied", self)
                 self._motion_state = new_state.state
                 if self._attr_preset_mode == PRESET_ACTIVITY:
@@ -1679,6 +1698,11 @@ class BaseThermostat(ClimateEntity, RestoreEntity, Generic[T]):
                     )
                 self.recalculate()
                 await self.async_control_heating(force=True)
+            else:
+                self._motion_state = (
+                    STATE_ON if new_state.state == STATE_OFF else STATE_OFF
+                )
+
             self._motion_call_cancel = None
 
         im_on = self._motion_state == STATE_ON

custom_components/versatile_thermostat/thermostat_climate.py

@@ -228,17 +228,18 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
                 and self.auto_regulation_use_device_temp
                 # and we have access to the device temp
                 and (device_temp := under.underlying_current_temperature) is not None
+                # issue 467 - always apply offset. TODO removes this if ok
                 # and target is not reach (ie we need regulation)
-                and (
-                    (
-                        self.hvac_mode == HVACMode.COOL
-                        and self.target_temperature < self.current_temperature
-                    )
-                    or (
-                        self.hvac_mode == HVACMode.HEAT
-                        and self.target_temperature > self.current_temperature
-                    )
-                )
+                # and (
+                #     (
+                #         self.hvac_mode == HVACMode.COOL
+                #         and self.target_temperature < self.current_temperature
+                #     )
+                #     or (
+                #         self.hvac_mode == HVACMode.HEAT
+                #         and self.target_temperature > self.current_temperature
+                #     )
+                # )
             ):
                 offset_temp = device_temp - self.current_temperature
 
@@ -692,8 +693,9 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
             else None
         )
 
+        last_sent_temperature = under.last_sent_temperature or 0
         under_temp_diff = (
-            (new_target_temp - under.last_sent_temperature) if new_target_temp else 0
+            (new_target_temp - last_sent_temperature) if new_target_temp else 0
         )
         if -1 < under_temp_diff < 1:
             under_temp_diff = 0

custom_components/versatile_thermostat/underlyings.py

@@ -550,14 +550,11 @@ class UnderlyingClimate(UnderlyingEntity):
     def is_device_active(self):
         """If the toggleable device is currently active."""
         if self.is_initialized:
-            return (
-                self._underlying_climate.hvac_mode != HVACMode.OFF
-                and self.hvac_action
-                not in [
-                    HVACAction.IDLE,
-                    HVACAction.OFF,
-                ]
-            )
+            return self.hvac_mode != HVACMode.OFF and self.hvac_action not in [
+                HVACAction.IDLE,
+                HVACAction.OFF,
+                None,
+            ]
         else:
             return None
 

tests/test_movement.py

@@ -97,7 +97,12 @@ async def test_movement_management_time_not_enough(
         return_value=False,
     ), patch(
         "homeassistant.helpers.condition.state", return_value=False
-    ) as mock_condition:
+    ) as mock_condition, patch(
+        "homeassistant.core.StateMachine.get",
+        return_value=State(
+            entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF
+        ),
+    ):
         event_timestamp = now - timedelta(minutes=4)
         try_condition = await send_motion_change_event(entity, True, False, event_timestamp)
 
@@ -109,8 +114,8 @@ async def test_movement_management_time_not_enough(
         # because no motion is detected yet
         assert entity.target_temperature == 18
         # state is not changed if time is not enough
-        assert entity.motion_state is None
-        assert entity.presence_state == "on"
+        assert entity.motion_state is STATE_OFF
+        assert entity.presence_state == STATE_ON
 
         assert mock_send_event.call_count == 0
         # Change is not confirmed
@@ -141,8 +146,8 @@ async def test_movement_management_time_not_enough(
         assert entity.preset_mode is PRESET_ACTIVITY
         # because motion is detected yet
         assert entity.target_temperature == 19
-        assert entity.motion_state == "on"
-        assert entity.presence_state == "on"
+        assert entity.motion_state == STATE_ON
+        assert entity.presence_state == STATE_ON
 
     # stop detecting motion with off delay too low
     with patch(
@@ -156,19 +161,24 @@ async def test_movement_management_time_not_enough(
         return_value=True,
     ) as mock_device_active, patch(
         "homeassistant.helpers.condition.state", return_value=False
-    ) as mock_condition:
+    ) as mock_condition, patch(
+        "homeassistant.core.StateMachine.get",
+        return_value=State(
+            entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF
+        ),
+    ):
         event_timestamp = now - timedelta(minutes=2)
         try_condition = await send_motion_change_event(entity, False, True, event_timestamp)
 
-         # Will return False -> we will stay to movement On
+        # Will return False -> we will stay to movement On
         await try_condition(None)
 
         assert entity.hvac_mode is HVACMode.HEAT
         assert entity.preset_mode is PRESET_ACTIVITY
         # because no motion is detected yet
         assert entity.target_temperature == 19
-        assert entity.motion_state == "on"
-        assert entity.presence_state == "on"
+        assert entity.motion_state == STATE_ON
+        assert entity.presence_state == STATE_ON
 
         assert mock_send_event.call_count == 0
         # The heater must heat now
@@ -192,15 +202,15 @@ async def test_movement_management_time_not_enough(
         event_timestamp = now - timedelta(minutes=1)
         try_condition = await send_motion_change_event(entity, False, True, event_timestamp)
 
-         # Will return True -> we will switch to movement Off
+        # Will return True -> we will switch to movement Off
         await try_condition(None)
 
         assert entity.hvac_mode is HVACMode.HEAT
         assert entity.preset_mode is PRESET_ACTIVITY
         # because no motion is detected yet
         assert entity.target_temperature == 18
-        assert entity.motion_state == "off"
-        assert entity.presence_state == "on"
+        assert entity.motion_state == STATE_OFF
+        assert entity.presence_state == STATE_ON
 
         assert mock_send_event.call_count == 0
         # The heater must stop heating now
@@ -214,7 +224,7 @@ async def test_movement_management_time_not_enough(
 async def test_movement_management_time_enough_and_presence(
     hass: HomeAssistant, skip_hass_states_is_state
 ):
-    """Test the Presence management when time is not enough"""
+    """Test the Motion management when time is not enough"""
 
     entry = MockConfigEntry(
         domain=DOMAIN,
@@ -479,7 +489,7 @@ async def test_movement_management_time_enoughand_not_presence(
 async def test_movement_management_with_stop_during_condition(
     hass: HomeAssistant, skip_hass_states_is_state
 ):
-    """Test the Presence management when the movement sensor switch to off and then to on during the test condition"""
+    """Test the Motion management when the movement sensor switch to off and then to on during the test condition"""
 
     entry = MockConfigEntry(
         domain=DOMAIN,
@@ -558,9 +568,13 @@ async def test_movement_management_with_stop_during_condition(
     ) as mock_heater_off, patch(
         "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
         return_value=True,
-    ), patch("homeassistant.helpers.condition.state", return_value=True): # Not needed for this test
+    ), patch(
+        "homeassistant.helpers.condition.state", return_value=True
+    ):  # Not needed for this test
         event_timestamp = now - timedelta(minutes=5)
-        try_condition1 = await send_motion_change_event(entity, True, False, event_timestamp)
+        try_condition1 = await send_motion_change_event(
+            entity, True, False, event_timestamp
+        )
 
         assert try_condition1 is not None
 
@@ -573,8 +587,10 @@ async def test_movement_management_with_stop_during_condition(
 
         # Send a stop detection
         event_timestamp = now - timedelta(minutes=4)
-        try_condition = await send_motion_change_event(entity, False, True, event_timestamp)
-        assert try_condition is None    # The timer should not have been stopped
+        try_condition = await send_motion_change_event(
+            entity, False, True, event_timestamp
+        )
+        assert try_condition is None  # The timer should not have been stopped
 
         assert entity.hvac_mode is HVACMode.HEAT
         assert entity.preset_mode is PRESET_ACTIVITY
@@ -584,8 +600,12 @@ async def test_movement_management_with_stop_during_condition(
 
         # Resend a start detection
         event_timestamp = now - timedelta(minutes=3)
-        try_condition = await send_motion_change_event(entity, True, False, event_timestamp)
-        assert try_condition is None  # The timer should not have been restarted (we keep the first one)
+        try_condition = await send_motion_change_event(
+            entity, True, False, event_timestamp
+        )
+        assert (
+            try_condition is None
+        )  # The timer should not have been restarted (we keep the first one)
 
         assert entity.hvac_mode is HVACMode.HEAT
         assert entity.preset_mode is PRESET_ACTIVITY
@@ -596,6 +616,122 @@ async def test_movement_management_with_stop_during_condition(
 
         await try_condition1(None)
         # We should have switch this time
-        assert entity.target_temperature == 19 # Boost
-        assert entity.motion_state == "on"     # switch to movement on
+        assert entity.target_temperature == 19  # Boost
+        assert entity.motion_state == "on"  # switch to movement on
         assert entity.presence_state == "off"  # Non change
+
+
+@pytest.mark.parametrize("expected_lingering_tasks", [True])
+@pytest.mark.parametrize("expected_lingering_timers", [True])
+async def test_movement_management_with_stop_during_condition_last_state_on(
+    hass: HomeAssistant, skip_hass_states_is_state
+):
+    """Test the Motion management when the movement sensor switch to off and then to on during the test condition"""
+
+    entry = MockConfigEntry(
+        domain=DOMAIN,
+        title="TheOverSwitchMockName",
+        unique_id="uniqueId",
+        data={
+            CONF_NAME: "TheOverSwitchMockName",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            "eco_temp": 17,
+            "comfort_temp": 18,
+            "boost_temp": 19,
+            "eco_away_temp": 17,
+            "comfort_away_temp": 18,
+            "boost_away_temp": 19,
+            CONF_USE_WINDOW_FEATURE: False,
+            CONF_USE_MOTION_FEATURE: True,
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+            CONF_HEATER: "switch.mock_switch",
+            CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
+            CONF_TPI_COEF_INT: 0.3,
+            CONF_TPI_COEF_EXT: 0.01,
+            CONF_MINIMAL_ACTIVATION_DELAY: 30,
+            CONF_SECURITY_DELAY_MIN: 5,
+            CONF_SECURITY_MIN_ON_PERCENT: 0.3,
+            CONF_MOTION_SENSOR: "binary_sensor.mock_motion_sensor",
+            CONF_MOTION_DELAY: 10,
+            CONF_MOTION_OFF_DELAY: 30,
+            CONF_MOTION_PRESET: "boost",
+            CONF_NO_MOTION_PRESET: "comfort",
+        },
+    )
+
+    entity: BaseThermostat = await create_thermostat(
+        hass, entry, "climate.theoverswitchmockname"
+    )
+    assert entity
+
+    tz = get_tz(hass)  # pylint: disable=invalid-name
+    now: datetime = datetime.now(tz=tz)
+
+    # 0. start heating, in boost mode. We block the control_heating to avoid running a cycle
+    with patch(
+        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.async_control_heating"
+    ):
+        await entity.async_set_hvac_mode(HVACMode.HEAT)
+        await entity.async_set_preset_mode(PRESET_ACTIVITY)
+
+        assert entity.hvac_mode is HVACMode.HEAT
+        assert entity.preset_mode is PRESET_ACTIVITY
+        # because no motion is detected yet
+        assert entity.target_temperature == 18
+        assert entity.motion_state is None
+
+        event_timestamp = now - timedelta(minutes=6)
+        await send_temperature_change_event(entity, 18, event_timestamp)
+        await send_ext_temperature_change_event(entity, 10, event_timestamp)
+
+    # 1. starts detecting motion but the sensor is off
+    with patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        return_value=True,
+    ), patch("homeassistant.helpers.condition.state", return_value=False), patch(
+        "homeassistant.core.StateMachine.get",
+        return_value=State(
+            entity_id="binary_sensor.mock_motion_sensor", state=STATE_OFF
+        ),
+    ):
+        event_timestamp = now - timedelta(minutes=5)
+        try_condition1 = await send_motion_change_event(
+            entity, True, False, event_timestamp
+        )
+
+        assert try_condition1 is not None
+
+        await try_condition1(None)
+
+        # because no motion is detected yet -> condition.state is False and sensor is not active
+        assert entity.target_temperature == 18
+        assert entity.motion_state is STATE_OFF
+
+    # 2. starts detecting motion but the sensor is on
+    with patch(
+        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
+        return_value=True,
+    ), patch("homeassistant.helpers.condition.state", return_value=False), patch(
+        "homeassistant.core.StateMachine.get",
+        return_value=State(
+            entity_id="binary_sensor.mock_motion_sensor", state=STATE_ON
+        ),
+    ):
+        event_timestamp = now - timedelta(minutes=5)
+        try_condition1 = await send_motion_change_event(
+            entity, True, False, event_timestamp
+        )
+
+        assert try_condition1 is not None
+
+        await try_condition1(None)
+
+        # because no motion is detected yet -> condition.state is False and sensor is not active
+        assert entity.target_temperature == 19
+        assert entity.motion_state is STATE_ON