[#28] Add a window open detection based on internal temperature change

custom_components/versatile_thermostat/open_window_algorithm.py

@@ -11,6 +11,10 @@ from datetime import datetime
 
 _LOGGER = logging.getLogger(__name__)
 
+# To filter bad values
+MIN_DELTA_T_SEC = 10  # two temp mesure should be > 10 sec
+MAX_SLOPE_VALUE = 2  # slope cannot be > 2 or < -2 -> else this is an aberrant point
+
 
 class WindowOpenDetectionAlgorithm:
     """The class that implements the algorithm listed above"""
@@ -45,17 +49,28 @@ class WindowOpenDetectionAlgorithm:
             self._last_slope,
             self._last_temperature,
         )
-        delta_t = float((datetime_measure - self._last_datetime).total_seconds() / 60.0)
-        if delta_t <= 0:
+        lspe = self._last_slope
+
+        delta_t_sec = float((datetime_measure - self._last_datetime).total_seconds())
+        delta_t = delta_t_sec / 60.0
+        if delta_t_sec <= MIN_DELTA_T_SEC:
             _LOGGER.warning(
-                "Delta t is 0 or < 0 which should be not possible. We stop here the open window detection algorithm"
+                "Delta t is %d < %d which should be not possible. We don't consider this value",
+                delta_t_sec,
+                MIN_DELTA_T_SEC,
             )
-            return None
+            return lspe
 
         delta_temp = float(temperature - self._last_temperature)
         new_slope = delta_temp / delta_t
+        if new_slope > MAX_SLOPE_VALUE or new_slope < -MAX_SLOPE_VALUE:
+            _LOGGER.warning(
+                "New_slope is abs(%.2f) > %.2f which should be not possible. We don't consider this value",
+                new_slope,
+                MAX_SLOPE_VALUE,
+            )
+            return lspe
 
-        lspe = self._last_slope
         if self._last_slope is None:
             self._last_slope = new_slope
         else:

custom_components/versatile_thermostat/strings.json

@@ -59,7 +59,7 @@
         },
         "data_description": {
           "window_sensor_entity_id": "Leave empty if no window sensor should be use",
-          "window_auto_open_threshold": "Recommended value: 0.5. Leave empty if automatic window open detection is not use",
+          "window_auto_open_threshold": "Recommended value: between 0.05 and 0.1. Leave empty if automatic window open detection is not use",
           "window_auto_close_threshold": "Recommended value: 0. Leave empty if automatic window open detection is not use",
           "window_auto_max_duration": "Recommended value: 60 (one hour). Leave empty if automatic window open detection is not use"
         }

custom_components/versatile_thermostat/tests/conftest.py

@@ -78,6 +78,15 @@ def skip_hass_states_get_fixture():
         yield
 
 
+@pytest.fixture(name="skip_control_heating")
+def skip_control_heating_fixture():
+    """Skip the control_heating of VersatileThermostat"""
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_control_heating"
+    ):
+        yield
+
+
 @pytest.fixture(name="skip_hass_states_is_state")
 def skip_hass_states_is_state_fixture():
     """Skip the is_state in HomeAssistant"""

custom_components/versatile_thermostat/tests/const.py

@@ -1,4 +1,5 @@
-from homeassistant.components.climate.const import (
+""" The commons const for all tests """
+from homeassistant.components.climate.const import (  # pylint: disable=unused-import
     PRESET_BOOST,
     PRESET_COMFORT,
     PRESET_ECO,
@@ -30,6 +31,9 @@ from custom_components.versatile_thermostat.const import (
     CONF_USE_PRESENCE_FEATURE,
     CONF_WINDOW_SENSOR,
     CONF_WINDOW_DELAY,
+    CONF_WINDOW_AUTO_OPEN_THRESHOLD,
+    CONF_WINDOW_AUTO_CLOSE_THRESHOLD,
+    CONF_WINDOW_AUTO_MAX_DURATION,
     CONF_MOTION_SENSOR,
     CONF_MOTION_DELAY,
     CONF_MOTION_PRESET,
@@ -95,6 +99,12 @@ MOCK_WINDOW_CONFIG = {
     CONF_WINDOW_DELAY: 10,
 }
 
+MOCK_WINDOW_AUTO_CONFIG = {
+    CONF_WINDOW_AUTO_OPEN_THRESHOLD: 1.0,
+    CONF_WINDOW_AUTO_CLOSE_THRESHOLD: 0.0,
+    CONF_WINDOW_AUTO_MAX_DURATION: 5.0,
+}
+
 MOCK_MOTION_CONFIG = {
     CONF_MOTION_SENSOR: "input_boolean.motion_sensor",
     CONF_MOTION_DELAY: 10,

custom_components/versatile_thermostat/tests/test_config_flow.py

@@ -6,20 +6,7 @@ from homeassistant.config_entries import SOURCE_USER, ConfigEntry
 
 from custom_components.versatile_thermostat.const import DOMAIN
 
-from .const import (
-    MOCK_TH_OVER_SWITCH_USER_CONFIG,
-    MOCK_TH_OVER_CLIMATE_USER_CONFIG,
-    MOCK_TH_OVER_SWITCH_TYPE_CONFIG,
-    MOCK_TH_OVER_CLIMATE_TYPE_CONFIG,
-    MOCK_TH_OVER_SWITCH_TPI_CONFIG,
-    MOCK_PRESETS_CONFIG,
-    MOCK_WINDOW_CONFIG,
-    MOCK_MOTION_CONFIG,
-    MOCK_POWER_CONFIG,
-    MOCK_PRESENCE_CONFIG,
-    MOCK_ADVANCED_CONFIG,
-    MOCK_DEFAULT_FEATURE_CONFIG,
-)
+from .const import *  # pylint: disable=wildcard-import, unused-wildcard-import
 
 
 async def test_show_form(hass: HomeAssistant) -> None:
@@ -217,3 +204,168 @@ async def test_user_config_flow_over_climate(hass: HomeAssistant, skip_hass_stat
     assert result["result"].version == 1
     assert result["result"].title == "TheOverClimateMockName"
     assert isinstance(result["result"], ConfigEntry)
+
+
+async def test_user_config_flow_window_auto_ok(
+    hass: HomeAssistant, skip_hass_states_get, skip_control_heating
+):
+    """Test the config flow with only window auto feature"""
+    result = await hass.config_entries.flow.async_init(
+        DOMAIN, context={"source": SOURCE_USER}
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == SOURCE_USER
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"],
+        user_input={
+            CONF_NAME: "TheOverSwitchMockName",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            CONF_DEVICE_POWER: 1,
+            CONF_USE_WINDOW_FEATURE: True,
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+        },
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "type"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"], user_input=MOCK_TH_OVER_SWITCH_TYPE_CONFIG
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "tpi"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"], user_input=MOCK_TH_OVER_SWITCH_TPI_CONFIG
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "presets"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"], user_input=MOCK_PRESETS_CONFIG
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "window"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"],
+        user_input=MOCK_WINDOW_AUTO_CONFIG,
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "advanced"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"], user_input=MOCK_ADVANCED_CONFIG
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_CREATE_ENTRY
+    assert (
+        result["data"]
+        == MOCK_TH_OVER_SWITCH_USER_CONFIG
+        | {
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+            CONF_WINDOW_DELAY: 30,  # the default value is added
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+        }
+        | MOCK_TH_OVER_SWITCH_TYPE_CONFIG
+        | MOCK_TH_OVER_SWITCH_TPI_CONFIG
+        | MOCK_PRESETS_CONFIG
+        | MOCK_WINDOW_AUTO_CONFIG
+        | MOCK_ADVANCED_CONFIG
+    )
+    assert result["result"]
+    assert result["result"].domain == DOMAIN
+    assert result["result"].version == 1
+    assert result["result"].title == "TheOverSwitchMockName"
+    assert isinstance(result["result"], ConfigEntry)
+
+
+async def test_user_config_flow_window_auto_ko(
+    hass: HomeAssistant, skip_hass_states_get
+):
+    """Test the config flow with window auto and window features -> not allowed"""
+    result = await hass.config_entries.flow.async_init(
+        DOMAIN, context={"source": SOURCE_USER}
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == SOURCE_USER
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"],
+        user_input={
+            CONF_NAME: "TheOverSwitchMockName",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            CONF_DEVICE_POWER: 1,
+            CONF_USE_WINDOW_FEATURE: True,
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+        },
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "type"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"], user_input=MOCK_TH_OVER_SWITCH_TYPE_CONFIG
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "tpi"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"], user_input=MOCK_TH_OVER_SWITCH_TPI_CONFIG
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "presets"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"], user_input=MOCK_PRESETS_CONFIG
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    assert result["step_id"] == "window"
+    assert result["errors"] == {}
+
+    result = await hass.config_entries.flow.async_configure(
+        result["flow_id"],
+        user_input=MOCK_WINDOW_AUTO_CONFIG | MOCK_WINDOW_CONFIG,
+    )
+
+    assert result["type"] == data_entry_flow.RESULT_TYPE_FORM
+    # We should stay on window with an error
+    assert result["step_id"] == "window"
+    assert result["errors"] == {
+        "window_sensor_entity_id": "window_open_detection_method"
+    }

custom_components/versatile_thermostat/tests/test_open_window_algo.py

@@ -14,7 +14,7 @@ async def test_open_window_algo(
     the_algo = WindowOpenDetectionAlgorithm(1.0, 0.0)
     assert the_algo.last_slope is None
 
-    tz = get_tz(hass)
+    tz = get_tz(hass)  # pylint: disable=invalid-name
     now = datetime.now(tz)
 
     event_timestamp = now - timedelta(minutes=5)
@@ -50,7 +50,7 @@ async def test_open_window_algo(
     assert the_algo.is_window_close_detected() is False
     assert the_algo.is_window_open_detected() is False
 
-    # A new temperature with 2 degre less
+    # A new temperature with 2 degre less in one minute (value will be rejected)
     event_timestamp = now - timedelta(minutes=2)
     last_slope = the_algo.add_temp_measurement(
         temperature=7, datetime_measure=event_timestamp
@@ -107,7 +107,7 @@ async def test_open_window_algo_wrong(
     the_algo = WindowOpenDetectionAlgorithm(1.0, 0.0)
     assert the_algo.last_slope is None
 
-    tz = get_tz(hass)
+    tz = get_tz(hass)  # pylint: disable=invalid-name
     now = datetime.now(tz)
 
     event_timestamp = now - timedelta(minutes=5)

custom_components/versatile_thermostat/tests/test_window.py

@@ -1,7 +1,8 @@
 """ Test the Window management """
-from unittest.mock import patch, call
+import asyncio
+from unittest.mock import patch, call, PropertyMock
 from .commons import *  # pylint: disable=wildcard-import, unused-wildcard-import
-from datetime import datetime
+from datetime import datetime, timedelta
 
 import logging
 
@@ -11,7 +12,7 @@ logging.getLogger().setLevel(logging.DEBUG)
 async def test_window_management_time_not_enough(
     hass: HomeAssistant, skip_hass_states_is_state
 ):
-    """Test the Power management"""
+    """Test the Window management when time is not enough"""
 
     entry = MockConfigEntry(
         domain=DOMAIN,
@@ -97,7 +98,7 @@ async def test_window_management_time_not_enough(
 async def test_window_management_time_enough(
     hass: HomeAssistant, skip_hass_states_is_state
 ):
-    """Test the Power management"""
+    """Test the Window management when time is enough"""
 
     entry = MockConfigEntry(
         domain=DOMAIN,
@@ -197,3 +198,306 @@ async def test_window_management_time_enough(
             any_order=False,
         )
         assert entity.preset_mode is PRESET_BOOST
+
+
+async def test_window_auto_fast(hass: HomeAssistant, skip_hass_states_is_state):
+    """Test the Power management"""
+
+    entry = MockConfigEntry(
+        domain=DOMAIN,
+        title="TheOverSwitchMockName",
+        unique_id="uniqueId",
+        data={
+            CONF_NAME: "TheOverSwitchMockName",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            "eco_temp": 17,
+            "comfort_temp": 18,
+            "boost_temp": 21,
+            CONF_USE_WINDOW_FEATURE: True,
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+            CONF_HEATER: "switch.mock_switch",
+            CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
+            CONF_TPI_COEF_INT: 0.3,
+            CONF_TPI_COEF_EXT: 0.01,
+            CONF_MINIMAL_ACTIVATION_DELAY: 30,
+            CONF_SECURITY_DELAY_MIN: 5,
+            CONF_SECURITY_MIN_ON_PERCENT: 0.3,
+            CONF_WINDOW_AUTO_OPEN_THRESHOLD: 0.1,
+            CONF_WINDOW_AUTO_CLOSE_THRESHOLD: 0.1,
+            CONF_WINDOW_AUTO_MAX_DURATION: 10,  # Should be 0 for test
+        },
+    )
+
+    entity: VersatileThermostat = await create_thermostat(
+        hass, entry, "climate.theoverswitchmockname"
+    )
+    assert entity
+
+    tz = get_tz(hass)  # pylint: disable=invalid-name
+    now = datetime.now(tz)
+
+    tpi_algo = entity._prop_algorithm
+    assert tpi_algo
+
+    await entity.async_set_hvac_mode(HVACMode.HEAT)
+    await entity.async_set_preset_mode(PRESET_BOOST)
+    assert entity.hvac_mode is HVACMode.HEAT
+    assert entity.preset_mode is PRESET_BOOST
+    assert entity.overpowering_state is None
+    assert entity.target_temperature == 21
+
+    assert entity.window_state is None
+
+    # Make the temperature down
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
+        return_value=True,
+    ):
+        event_timestamp = now - timedelta(minutes=4)
+        await send_temperature_change_event(entity, 19, event_timestamp)
+
+        # The heater turns on
+        assert mock_send_event.call_count == 0
+        assert mock_heater_on.call_count == 1
+        assert entity.last_temperature_slope is None
+        assert entity._window_auto_algo.is_window_open_detected() is False
+        assert entity._window_auto_algo.is_window_close_detected() is False
+        assert entity.hvac_mode is HVACMode.HEAT
+
+    # send one degre down in one minute
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
+        return_value=True,
+    ):
+        event_timestamp = now - timedelta(minutes=3)
+        await send_temperature_change_event(entity, 18, event_timestamp)
+
+        # The heater turns on
+        assert mock_send_event.call_count == 2
+        assert mock_heater_on.call_count == 0
+        assert mock_heater_off.call_count >= 1
+        assert entity.last_temperature_slope == -1
+        assert entity._window_auto_algo.is_window_open_detected() is True
+        assert entity._window_auto_algo.is_window_close_detected() is False
+        assert entity.window_auto_state == STATE_ON
+        assert entity.hvac_mode is HVACMode.OFF
+
+        mock_send_event.assert_has_calls(
+            [
+                call.send_event(EventType.HVAC_MODE_EVENT, {"hvac_mode": HVACMode.OFF}),
+                call.send_event(
+                    EventType.WINDOW_AUTO_EVENT,
+                    {"type": "start", "cause": "slope alert", "curve_slope": -1.0},
+                ),
+            ],
+            any_order=True,
+        )
+
+    # send another 0.1 degre in one minute -> no change
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
+        new_callable=PropertyMock,
+        return_value=False,
+    ):
+        event_timestamp = now - timedelta(minutes=2)
+        await send_temperature_change_event(entity, 17.9, event_timestamp)
+
+        # The heater turns on
+        assert mock_send_event.call_count == 0
+        assert mock_heater_on.call_count == 0
+        assert mock_heater_off.call_count == 0
+        assert round(entity.last_temperature_slope, 3) == -0.1 * 0.5 - 1 * 0.5
+        assert entity._window_auto_algo.is_window_open_detected() is True
+        assert entity._window_auto_algo.is_window_close_detected() is False
+        assert entity.window_auto_state == STATE_ON
+        assert entity.hvac_mode is HVACMode.OFF
+
+    # send another plus 1.1 degre in one minute -> restore state
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
+        new_callable=PropertyMock,
+        return_value=False,
+    ):
+        event_timestamp = now - timedelta(minutes=1)
+        await send_temperature_change_event(entity, 19, event_timestamp)
+
+        # The heater turns on
+        assert mock_send_event.call_count == 2
+        mock_send_event.assert_has_calls(
+            [
+                call.send_event(
+                    EventType.HVAC_MODE_EVENT, {"hvac_mode": HVACMode.HEAT}
+                ),
+                call.send_event(
+                    EventType.WINDOW_AUTO_EVENT,
+                    {
+                        "type": "end",
+                        "cause": "end of slope alert",
+                        "curve_slope": 0.27500000000000036,
+                    },
+                ),
+            ],
+            any_order=True,
+        )
+        assert mock_heater_on.call_count == 1
+        assert mock_heater_off.call_count == 0
+        assert round(entity.last_temperature_slope, 3) == 0.275
+        assert entity._window_auto_algo.is_window_open_detected() is False
+        assert entity._window_auto_algo.is_window_close_detected() is True
+        assert entity.window_auto_state == STATE_OFF
+        assert entity.hvac_mode is HVACMode.HEAT
+
+
+async def test_window_auto_auto_stop(hass: HomeAssistant, skip_hass_states_is_state):
+    """Test the Power management"""
+
+    entry = MockConfigEntry(
+        domain=DOMAIN,
+        title="TheOverSwitchMockName",
+        unique_id="uniqueId",
+        data={
+            CONF_NAME: "TheOverSwitchMockName",
+            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
+            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
+            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
+            CONF_CYCLE_MIN: 5,
+            CONF_TEMP_MIN: 15,
+            CONF_TEMP_MAX: 30,
+            "eco_temp": 17,
+            "comfort_temp": 18,
+            "boost_temp": 21,
+            CONF_USE_WINDOW_FEATURE: True,
+            CONF_USE_MOTION_FEATURE: False,
+            CONF_USE_POWER_FEATURE: False,
+            CONF_USE_PRESENCE_FEATURE: False,
+            CONF_HEATER: "switch.mock_switch",
+            CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
+            CONF_TPI_COEF_INT: 0.3,
+            CONF_TPI_COEF_EXT: 0.01,
+            CONF_MINIMAL_ACTIVATION_DELAY: 30,
+            CONF_SECURITY_DELAY_MIN: 5,
+            CONF_SECURITY_MIN_ON_PERCENT: 0.3,
+            CONF_WINDOW_AUTO_OPEN_THRESHOLD: 0.1,
+            CONF_WINDOW_AUTO_CLOSE_THRESHOLD: 0.1,
+            CONF_WINDOW_AUTO_MAX_DURATION: 0,  # Should be 0 for test
+        },
+    )
+
+    entity: VersatileThermostat = await create_thermostat(
+        hass, entry, "climate.theoverswitchmockname"
+    )
+    assert entity
+
+    tz = get_tz(hass)  # pylint: disable=invalid-name
+    now = datetime.now(tz)
+
+    tpi_algo = entity._prop_algorithm
+    assert tpi_algo
+
+    await entity.async_set_hvac_mode(HVACMode.HEAT)
+    await entity.async_set_preset_mode(PRESET_BOOST)
+    assert entity.hvac_mode is HVACMode.HEAT
+    assert entity.preset_mode is PRESET_BOOST
+    assert entity.overpowering_state is None
+    assert entity.target_temperature == 21
+
+    assert entity.window_state is None
+
+    # Make the temperature down
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
+        return_value=True,
+    ):
+        event_timestamp = now - timedelta(minutes=4)
+        await send_temperature_change_event(entity, 19, event_timestamp)
+
+        # The heater turns on
+        assert mock_heater_on.call_count == 1
+        assert entity.last_temperature_slope is None
+        assert entity._window_auto_algo.is_window_open_detected() is False
+        assert entity._window_auto_algo.is_window_close_detected() is False
+        assert entity.hvac_mode is HVACMode.HEAT
+
+    # send one degre down in one minute
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
+        return_value=True,
+    ):
+        event_timestamp = now - timedelta(minutes=3)
+        await send_temperature_change_event(entity, 18, event_timestamp)
+
+        # The heater turns on
+        assert mock_send_event.call_count == 2
+        assert mock_heater_on.call_count == 0
+        assert mock_heater_off.call_count >= 1
+        assert entity.last_temperature_slope == -1
+        assert entity._window_auto_algo.is_window_open_detected() is True
+        assert entity._window_auto_algo.is_window_close_detected() is False
+        assert entity.window_auto_state == STATE_ON
+        assert entity.hvac_mode is HVACMode.OFF
+
+        # Waits for automatic disable
+    with patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
+    ) as mock_send_event, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
+    ) as mock_heater_on, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
+    ) as mock_heater_off, patch(
+        "custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
+        return_value=False,
+    ):
+        await asyncio.sleep(0.3)
+
+        assert mock_heater_on.call_count == 1
+        assert mock_heater_off.call_count == 0
+        assert round(entity.last_temperature_slope, 3) == -1
+        # Because the algorithm is not aware of the expiration, for the algo we are still in alert
+        assert entity._window_auto_algo.is_window_open_detected() is True
+        assert entity._window_auto_algo.is_window_close_detected() is False
+        assert entity.window_auto_state == STATE_OFF
+        assert entity.hvac_mode is HVACMode.HEAT
+        assert entity.preset_mode is PRESET_BOOST

custom_components/versatile_thermostat/translations/en.json

@@ -59,7 +59,7 @@
         },
         "data_description": {
           "window_sensor_entity_id": "Leave empty if no window sensor should be use",
-          "window_auto_open_threshold": "Recommended value: 0.5. Leave empty if automatic window open detection is not use",
+          "window_auto_open_threshold": "Recommended value: between 0.05 and 0.1. Leave empty if automatic window open detection is not use",
           "window_auto_close_threshold": "Recommended value: 0. Leave empty if automatic window open detection is not use",
           "window_auto_max_duration": "Recommended value: 60 (one hour). Leave empty if automatic window open detection is not use"
         }

custom_components/versatile_thermostat/translations/fr.json

@@ -58,7 +58,7 @@
         },
         "data_description": {
           "window_sensor_entity_id": "Laissez vide si vous n'avez de détecteur",
-          "window_auto_open_threshold": "Valeur recommandée: 0.5. Laissez vide si vous n'utilisez pas la détection automatique",
+          "window_auto_open_threshold": "Valeur recommandée: entre 0.05 et 0.1. Laissez vide si vous n'utilisez pas la détection automatique",
           "window_auto_close_threshold": "Valeur recommandée: 0. Laissez vide si vous n'utilisez pas la détection automatique",
           "window_auto_max_duration": "Valeur recommandée: 60 (1 heure). Laissez vide si vous n'utilisez pas la détection automatique"
         }