Release 3.1.0
This commit is contained in:
Jean-Marc Collin
@@ -19,6 +19,7 @@ input_number:
|
||||
step: .1
|
||||
icon: mdi:thermometer
|
||||
unit_of_measurement: °C
|
||||
mode: box
|
||||
fake_external_temperature_sensor1:
|
||||
name: Ext Temperature
|
||||
min: -10
|
||||
@@ -26,6 +27,7 @@ input_number:
|
||||
step: .1
|
||||
icon: mdi:home-thermometer
|
||||
unit_of_measurement: °C
|
||||
mode: box
|
||||
fake_current_power:
|
||||
name: Current power
|
||||
min: 0
|
||||
|
||||
48
README-fr.md
48
README-fr.md
@@ -18,6 +18,8 @@
|
||||
- [Configurez les coefficients de l'algorithme TPI](#configurez-les-coefficients-de-lalgorithme-tpi)
|
||||
- [Configurer la température préréglée](#configurer-la-température-préréglée)
|
||||
- [Configurer les portes/fenêtres en allumant/éteignant les thermostats](#configurer-les-portesfenêtres-en-allumantéteignant-les-thermostats)
|
||||
- [Le mode capteur](#le-mode-capteur)
|
||||
- [Le mode auto](#le-mode-auto)
|
||||
- [Configurer le mode d'activité ou la détection de mouvement](#configurer-le-mode-dactivité-ou-la-détection-de-mouvement)
|
||||
- [Configurer la gestion de la puissance](#configurer-la-gestion-de-la-puissance)
|
||||
- [Configurer la présence ou l'occupation](#configurer-la-présence-ou-loccupation)
|
||||
@@ -45,8 +47,17 @@
|
||||
- [Et toujours de mieux en mieux avec l'AappDaemon NOTIFIER pour notifier les évènements](#et-toujours-de-mieux-en-mieux-avec-laappdaemon-notifier-pour-notifier-les-évènements)
|
||||
- [Les contributions sont les bienvenues !](#les-contributions-sont-les-bienvenues)
|
||||
|
||||
|
||||
Ce composant personnalisé pour Home Assistant est une mise à niveau et est une réécriture complète du composant "Awesome thermostat" (voir [Github](https://github.com/dadge/awesome_thermostat)) avec l'ajout de fonctionnalités.
|
||||
|
||||
|
||||
>  _*Nouveautés*_
|
||||
> * **Release 3.1** : ajout d'une détection de fenêtres/portes ouvertes par chute de température. Cette nouvelle fonction permet de stopper automatiquement un radiateur lorsque la température chute brutalement. Voir [Le mode auto](#le-mode-auto)
|
||||
> * **Release majeure 3.0** : ajout d'un équipement thermostat et de capteurs (binaires et non binaires) associés. Beaucoup plus proche de la philosphie Home Assistant, vous avez maintenant un accès direct à l'énergie consommée par le radiateur piloté par le thermostat et à plein d'autres capteurs qui seront utiles dans vos automatisations et dashboard.
|
||||
> * **release 2.3** : ajout de la mesure de puissance et d'énergie du radiateur piloté par le thermostat.
|
||||
> * **release 2.2** : ajout de fonction de sécurité permettant de ne pas laisser éternellement en chauffe un radiateur en cas de panne du thermomètre
|
||||
> * **release majeure 2.0** : ajout du thermostat "over climate" permettant de transformer n'importe quel thermostat en Versatile Thermostat et lui ajouter toutes les fonctions de ce dernier.
|
||||
|
||||
# Quand l'utiliser et ne pas l'utiliser
|
||||
Ce thermostat peut piloter 2 types d'équipement:
|
||||
1. un radiateur qui ne fonctionne qu'en mode marche/arrêt (nommé ```thermostat_over_switch```). La configuration minimale nécessaire pour utiliser ce type thermostat est :
|
||||
@@ -64,7 +75,6 @@ Parce que cette intégration vise à commander le radiateur en tenant compte du
|
||||
|
||||
# Pourquoi une nouvelle implémentation du thermostat ?
|
||||
|
||||
Pour mon usage personnel, j'avais besoin d'ajouter quelques fonctionnalités et aussi de mettre à jour le comportement implémenté dans le composant précédent "Awesome thermostat".
|
||||
Ce composant nommé __Versatile thermostat__ gère les cas d'utilisation suivants :
|
||||
- Configuration via l'interface graphique d'intégration standard (à l'aide du flux Config Entry),
|
||||
- Utilisations complètes du **mode préréglages**,
|
||||
@@ -171,19 +181,45 @@ Le mode préréglé (preset) vous permet de préconfigurer la température cibl
|
||||
5. Si vous ne souhaitez pas utiliser le préréglage, indiquez 0 comme température. Le préréglage sera alors ignoré et ne s'affichera pas dans le composant front
|
||||
|
||||
## Configurer les portes/fenêtres en allumant/éteignant les thermostats
|
||||
Si vous avez choisi la fonctionnalité ```Avec détection des ouvertures```, cliquez sur 'Valider' sur la page précédente et vous y arriverez :
|
||||
Vous devez avoir choisi la fonctionnalité ```Avec détection des ouvertures``` dans la première page pour arriver sur cette page.
|
||||
La détecttion des ouvertures peut se faire de 2 manières:
|
||||
1. soit avec un capteur placé sur l'ouverture (mode capteur),
|
||||
2. soit en détectant une chute brutale de température (mode auto)
|
||||
|
||||
|
||||
### Le mode capteur
|
||||
En mode capteur, vous devez renseigner les informations suivantes:
|
||||
|
||||
|
||||
Donnez les attributs suivants :
|
||||
1. un identifiant d'entité d'un **capteur de fenêtre/porte**. Cela devrait être un binary_sensor ou un input_boolean. L'état de l'entité doit être 'on' lorsque la fenêtre est ouverte ou 'off' lorsqu'elle est fermée
|
||||
2. un **délai en secondes** avant tout changement. Cela permet d'ouvrir rapidement une fenêtre sans arrêter le chauffage.
|
||||
|
||||
Et c'est tout ! votre thermostat s'éteindra lorsque les fenêtres seront ouvertes et se rallumera lorsqu'il sera fermé après le délai.
|
||||
|
||||
### Le mode auto
|
||||
En mode auto, la configuration est la suivante:
|
||||
|
||||
|
||||
1. un seuil de détection en degré par minute. Lorsque la température chute au delà de ce seuil, le thermostat s'éteindra. Plus cette valeur est faible et plus la détection sera rapide (en contre-partie d'un risque de faux positif),
|
||||
2. un seuil de fin de détection en degré par minute. Lorsque la chute de température repassera au-dessus cette valeur, le thermostat se remettra dans le mode précédent (mode et preset),
|
||||
3. une durée maximale de détection. Au delà de cette durée, le thermostat se remettra dans son mode et preset précédent même si la température continue de chuter.
|
||||
|
||||
Pour régler les seuils il est conseillé de commencer avec les valeurs de référence et d'ajuster les seuils de détection. Quelques essais m'ont donné les valeurs suivantes (pour un bureau):
|
||||
- seuil de détection : 0,05 °C/min
|
||||
- seuil de non détection: 0 °C/min
|
||||
- durée max : 60 min.
|
||||
|
||||
Un nouveau capteur "slope" a été ajouté pour tous les thermostats. Il donne la pente de la courbe de température en °C/min (ou °K/min). Cette pente est lissée et filtrée pour éviter les valeurs abérrantes des thermomètres qui viendraient pertuber la mesure.
|
||||
|
||||
|
||||
Pour bien régler il est conseillé d'affocher sur un même graphique historique la courbe de température et la pente de la courbe (le "slope") :
|
||||
|
||||
|
||||
Et c'est tout ! votre thermostat s'éteindra lorsque les fenêtres seront ouvertes et se rallumera lorsqu'il sera fermé.
|
||||
|
||||
>  _*Notes*_
|
||||
1. Si vous souhaitez utiliser **plusieurs capteurs de porte/fenêtre** pour automatiser votre thermostat, créez simplement un groupe avec le comportement habituel (https://www.home-assistant.io/integrations/binary_sensor.group/)
|
||||
2. Si vous n'avez pas de capteur de fenêtre/porte dans votre chambre, laissez simplement l'identifiant de l'entité du capteur vide
|
||||
2. Si vous n'avez pas de capteur de fenêtre/porte dans votre chambre, laissez simplement l'identifiant de l'entité du capteur vide,
|
||||
3. **Un seul mode est permis**. On ne peut pas configurer un thermostat avec un capteur et une détection automatique. Les 2 modes risquant de se contredire, il n'est pas possible d'avoir les 2 modes en même temps,
|
||||
4. Il est déconseillé d'utiliser le mode automatique pour un équipement soumis à des variations de température fréquentes et normales (couloirs, zones ouvertes, ...)
|
||||
|
||||
## Configurer le mode d'activité ou la détection de mouvement
|
||||
Si vous avez choisi la fonctionnalité ```Avec détection de mouvement```, cliquez sur 'Valider' sur la page précédente et vous y arriverez :
|
||||
|
||||
54
README.md
54
README.md
@@ -18,6 +18,8 @@
|
||||
- [Configure the TPI algorithm coefficients](#configure-the-tpi-algorithm-coefficients)
|
||||
- [Configure the preset temperature](#configure-the-preset-temperature)
|
||||
- [Configure the doors/windows turning on/off the thermostats](#configure-the-doorswindows-turning-onoff-the-thermostats)
|
||||
- [The sensor mode](#the-sensor-mode)
|
||||
- [Auto mode](#auto-mode)
|
||||
- [Configure the activity mode or motion detection](#configure-the-activity-mode-or-motion-detection)
|
||||
- [Configure the power management](#configure-the-power-management)
|
||||
- [Configure the presence or occupancy](#configure-the-presence-or-occupancy)
|
||||
@@ -48,6 +50,13 @@
|
||||
|
||||
This custom component for Home Assistant is an upgrade and is a complete rewrite of the component "Awesome thermostat" (see [Github](https://github.com/dadge/awesome_thermostat)) with addition of features.
|
||||
|
||||
> _*News*_
|
||||
> * **Release 3.1**: added detection of open windows/doors by temperature drop. This new function makes it possible to automatically stop a radiator when the temperature drops suddenly. See [Auto mode](#le-mode-auto)
|
||||
> * **Major release 3.0**: addition of thermostat equipment and associated sensors (binary and non-binary). Much closer to the Home Assistant philosophy, you now have direct access to the energy consumed by the radiator controlled by the thermostat and many other sensors that will be useful in your automations and dashboard.
|
||||
> * **release 2.3**: addition of the power and energy measurement of the radiator controlled by the thermostat.
|
||||
> * **release 2.2**: addition of a safety function allowing a radiator not to be left heating forever in the event of a thermometer failure
|
||||
> * **major release 2.0**: addition of the "over climate" thermostat allowing you to transform any thermostat into a Versatile Thermostat and add all the functions of the latter.
|
||||
|
||||
# When to use / not use
|
||||
This thermostat can control 2 types of equipment:
|
||||
1. a heater that only works in on/off mode (named ```thermostat_over_switch```). The minimum configuration required to use this type of thermostat is:
|
||||
@@ -63,7 +72,7 @@ The ```thermostat_over_climate``` type allows you to add all the functionality p
|
||||
|
||||
# Why another thermostat implementation ?
|
||||
|
||||
For my personnal usage, I needed to add a couple of features and also to update the behavior that implemented in the previous component "Awesome thermostat".
|
||||
|
||||
This component named __Versatile thermostat__ manage the following use cases :
|
||||
- Configuration through standard integration GUI (using Config Entry flow),
|
||||
- Full uses of **presets mode**,
|
||||
@@ -160,19 +169,44 @@ The preset mode allows you to pre-configurate targeted temperature. Used in conj
|
||||
5. ff you don't want to use the preseet, give 0 as temperature. The preset will then been ignored and will not displayed in the front component
|
||||
|
||||
## Configure the doors/windows turning on/off the thermostats
|
||||
If you choose the ```Window management``` feature, click on 'Validate' on the previous page and you will get there:
|
||||
|
||||
You must have chosen the ```With opening detection``` feature on the first page to arrive on this page.
|
||||
The detection of openings can be done in 2 ways:
|
||||
1. either with a sensor placed on the opening (sensor mode),
|
||||
2. either by detecting a sudden drop in temperature (auto mode)
|
||||
|
||||
Give the following attributes:
|
||||
1. an entity id of a **window/door sensor**. This should be a binary_sensor or a input_boolean. The state of the entity should be 'on' when the window is open or 'off' when closed
|
||||
2. a **delay in seconds** before any change. This allow to quickly open a window without stopping the heater.
|
||||
### The sensor mode
|
||||
In sensor mode, you must fill in the following information:
|
||||
|
||||
|
||||
And that's it ! your thermostat will turn off when the windows is open and be turned back on when it's closed afer the delay.
|
||||
1. an entity ID of a **window/door sensor**. It should be a binary_sensor or an input_boolean. The state of the entity must be 'on' when the window is open or 'off' when it is closed
|
||||
2. a **delay in seconds** before any change. This allows a window to be opened quickly without stopping the heating.
|
||||
|
||||
>  _*Notes*_
|
||||
1. If you want to use **several door/windows sensors** to automatize your thermostat, just create a group with the regular behavior (https://www.home-assistant.io/integrations/binary_sensor.group/)
|
||||
2. If you don't have any window/door sensor in your room, just leave the sensor entity id empty
|
||||
### Auto mode
|
||||
In auto mode, the configuration is as follows:
|
||||
|
||||
|
||||
1. a detection threshold in degrees per minute. When the temperature drops below this threshold, the thermostat will turn off. The lower this value, the faster the detection will be (in return for a risk of false positives),
|
||||
2. an end of detection threshold in degrees per minute. When the temperature drop goes above this value, the thermostat will go back to the previous mode (mode and preset),
|
||||
3. maximum detection time. Beyond this time, the thermostat will return to its previous mode and preset even if the temperature continues to drop.
|
||||
|
||||
To set the thresholds it is advisable to start with the reference values and adjust the detection thresholds. A few tries gave me the following values (for a desktop):
|
||||
- detection threshold: 0.05°C/min
|
||||
- non-detection threshold: 0 °C/min
|
||||
- maximum duration: 60 min.
|
||||
|
||||
A new "slope" sensor has been added for all thermostats. It gives the slope of the temperature curve in °C/min (or °K/min). This slope is smoothed and filtered to avoid aberrant values from the thermometers which would interfere with the measurement.
|
||||
|
||||
|
||||
To properly adjust it is advisable to display on the same historical graph the temperature curve and the slope of the curve (the "slope"):
|
||||
|
||||
|
||||
And that's all ! your thermostat will turn off when the windows are open and turn back on when closed.
|
||||
|
||||
>  _*Notes*_
|
||||
1. If you want to use **multiple door/window sensors** to automate your thermostat, just create a group with the usual behavior (https://www.home-assistant.io/integrations/binary_sensor.group/)
|
||||
2. If you don't have a window/door sensor in your room, just leave the sensor entity id blank,
|
||||
3. **Only one mode is allowed**. You cannot configure a thermostat with a sensor and automatic detection. The 2 modes may contradict each other, it is not possible to have the 2 modes at the same time,
|
||||
4. It is not recommended to use the automatic mode for equipment subject to frequent and normal temperature variations (corridors, open areas, ...)
|
||||
## Configure the activity mode or motion detection
|
||||
If you choose the ```Motion management``` feature, lick on 'Validate' on the previous page and you will get there:
|
||||
|
||||
|
||||
@@ -275,6 +275,8 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
|
||||
self._underlying_climate_start_hvac_action_date = None
|
||||
self._underlying_climate_delta_t = 0
|
||||
|
||||
self._window_sensor_entity_id = None
|
||||
self._window_delay_sec = None
|
||||
self._window_auto_open_threshold = 0
|
||||
self._window_auto_close_threshold = 0
|
||||
self._window_auto_max_duration = 0
|
||||
@@ -1910,10 +1912,23 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
|
||||
if (
|
||||
self._window_auto_algo.is_window_open_detected()
|
||||
and self._window_auto_state is False
|
||||
and self.hvac_mode != HVACMode.OFF
|
||||
):
|
||||
if (
|
||||
not self.proportional_algorithm
|
||||
or self.proportional_algorithm.on_percent <= 0.0
|
||||
):
|
||||
_LOGGER.info(
|
||||
"%s - Start auto detection of open window slope=%.3f but no heating detected (on_percent<=0). Forget the event",
|
||||
self,
|
||||
slope,
|
||||
)
|
||||
return dearm_window_auto
|
||||
|
||||
_LOGGER.warning(
|
||||
"%s - Start auto detection of open window slope=%.3f", self, slope
|
||||
)
|
||||
|
||||
# Send an event
|
||||
self.send_event(
|
||||
EventType.WINDOW_AUTO_EVENT,
|
||||
@@ -2418,6 +2433,7 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
|
||||
"motion_state": self._motion_state,
|
||||
"overpowering_state": self._overpowering_state,
|
||||
"presence_state": self._presence_state,
|
||||
"window_auto_state": self._window_auto_state,
|
||||
"security_delay_min": self._security_delay_min,
|
||||
"security_min_on_percent": self._security_min_on_percent,
|
||||
"security_default_on_percent": self._security_default_on_percent,
|
||||
@@ -2436,6 +2452,10 @@ class VersatileThermostat(ClimateEntity, RestoreEntity):
|
||||
.astimezone(self._current_tz)
|
||||
.isoformat(),
|
||||
"timezone": str(self._current_tz),
|
||||
"window_delay_sec": self._window_delay_sec,
|
||||
"window_auto_open_threshold": self._window_auto_open_threshold,
|
||||
"window_auto_close_threshold": self._window_auto_close_threshold,
|
||||
"window_auto_max_duration": self._window_auto_max_duration,
|
||||
}
|
||||
if self._is_over_climate:
|
||||
self._attr_extra_state_attributes[
|
||||
|
||||
@@ -59,6 +59,7 @@
|
||||
},
|
||||
"data_description": {
|
||||
"window_sensor_entity_id": "Leave empty if no window sensor should be use",
|
||||
"window_delay": "The delay in seconds before sensor detection is taken into account",
|
||||
"window_auto_open_threshold": "Recommended value: between 0.05 and 0.1. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_close_threshold": "Recommended value: 0. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_max_duration": "Recommended value: 60 (one hour). Leave empty if automatic window open detection is not use"
|
||||
@@ -97,10 +98,16 @@
|
||||
"title": "Advanced parameters",
|
||||
"description": "Configuration of advanced parameters. Leave the default values if you don't know what you are doing.\nThis parameters can lead to a very bad temperature or power regulation.",
|
||||
"data": {
|
||||
"minimal_activation_delay": "Delay in secondes under which the equipment will not be activated",
|
||||
"security_delay_min": "Maximum allowed delay in minutes between two temperature mesures. Above this delay, the thermostat will turn to a sceurity off state",
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of on_percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
"minimal_activation_delay": "Minimal activation delay",
|
||||
"security_delay_min": "Security delay (in minutes)",
|
||||
"security_min_on_percent": "Minimal power percent for security mode",
|
||||
"security_default_on_percent": "Power percent to use in security mode"
|
||||
},
|
||||
"data_description": {
|
||||
"minimal_activation_delay": "Delay in seconds under which the equipment will not be activated",
|
||||
"security_delay_min": "Maximum allowed delay in minutes between two temperature mesures. Above this delay, the thermostat will turn to a security off state",
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of power percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating power percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
}
|
||||
}
|
||||
},
|
||||
@@ -161,20 +168,21 @@
|
||||
}
|
||||
},
|
||||
"window": {
|
||||
"title": "[%key:component::versatile_thermostat::config::step::window::title%]",
|
||||
"description": "[%key:component::versatile_thermostat::config::step::window::description%]",
|
||||
"title": "Window management",
|
||||
"description": "Open window management.\nLeave corresponding entity_id empty if not used\nYou can also configure automatic window open detection based on temperature decrease",
|
||||
"data": {
|
||||
"window_sensor_entity_id": "[%key:component::versatile_thermostat::config::step::window::data::window_sensor_entity_id%]",
|
||||
"window_delay": "[%key:component::versatile_thermostat::config::step::window::data::window_delay%]",
|
||||
"window_auto_open_threshold": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_open_threshold%]",
|
||||
"window_auto_close_threshold": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_close_threshold%]",
|
||||
"window_auto_max_duration": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_max_duration%]"
|
||||
"window_sensor_entity_id": "Window sensor entity id",
|
||||
"window_delay": "Window sensor delay (seconds)",
|
||||
"window_auto_open_threshold": "Temperature decrease threshold for automatic window open detection (in °/min)",
|
||||
"window_auto_close_threshold": "Temperature increase threshold for end of automatic detection (in °/min)",
|
||||
"window_auto_max_duration": "Maximum duration of automatic window open detection (in min)"
|
||||
},
|
||||
"data_description": {
|
||||
"window_sensor_entity_id": "[%key:component::versatile_thermostat::config::step::window::data_description::window_sensor_entity_id%]",
|
||||
"window_auto_open_threshold": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_open_threshold%]",
|
||||
"window_auto_close_threshold": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_close_threshold%]",
|
||||
"window_auto_max_duration": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_max_duration%]"
|
||||
"window_sensor_entity_id": "Leave empty if no window sensor should be use",
|
||||
"window_delay": "The delay in seconds before sensor detection is taken into account",
|
||||
"window_auto_open_threshold": "Recommended value: between 0.05 and 0.1. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_close_threshold": "Recommended value: 0. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_max_duration": "Recommended value: 60 (one hour). Leave empty if automatic window open detection is not use"
|
||||
}
|
||||
},
|
||||
"motion": {
|
||||
@@ -210,20 +218,26 @@
|
||||
"title": "Advanced parameters",
|
||||
"description": "Configuration of advanced parameters. Leave the default values if you don't know what you are doing.\nThis parameters can lead to a very bad temperature or power regulation.",
|
||||
"data": {
|
||||
"minimal_activation_delay": "Delay in secondes under which the equipment will not be activated",
|
||||
"minimal_activation_delay": "Minimal activation delay",
|
||||
"security_delay_min": "Security delay (in minutes)",
|
||||
"security_min_on_percent": "Minimal power percent for security mode",
|
||||
"security_default_on_percent": "Power percent to use in security mode"
|
||||
},
|
||||
"data_description": {
|
||||
"minimal_activation_delay": "Delay in seconds under which the equipment will not be activated",
|
||||
"security_delay_min": "Maximum allowed delay in minutes between two temperature mesures. Above this delay, the thermostat will turn to a security off state",
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of on_percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of power percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating power percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
}
|
||||
}
|
||||
},
|
||||
"error": {
|
||||
"unknown": "[%key:component::versatile_thermostat::config::error::unknown%]",
|
||||
"unknown_entity": "[%key:component::versatile_thermostat::config::error::unknown_entity%]",
|
||||
"window_open_detection_method": "[%key:component::versatile_thermostat::config::error::window_open_detection_method%]"
|
||||
"unknown": "Unexpected error",
|
||||
"unknown_entity": "Unknown entity id",
|
||||
"window_open_detection_method": "Only one window open detection method should be used. Use sensor or automatic detection through temperature threshold but not both"
|
||||
},
|
||||
"abort": {
|
||||
"already_configured": "[%key:component::versatile_thermostat::config::abort::already_configured%]"
|
||||
"already_configured": "Device is already configured"
|
||||
}
|
||||
},
|
||||
"selector": {
|
||||
|
||||
@@ -501,3 +501,107 @@ async def test_window_auto_auto_stop(hass: HomeAssistant, skip_hass_states_is_st
|
||||
assert entity.window_auto_state == STATE_OFF
|
||||
assert entity.hvac_mode is HVACMode.HEAT
|
||||
assert entity.preset_mode is PRESET_BOOST
|
||||
|
||||
|
||||
async def test_window_auto_no_on_percent(
|
||||
hass: HomeAssistant, skip_hass_states_is_state
|
||||
):
|
||||
"""Test the Power management"""
|
||||
|
||||
entry = MockConfigEntry(
|
||||
domain=DOMAIN,
|
||||
title="TheOverSwitchMockName",
|
||||
unique_id="uniqueId",
|
||||
data={
|
||||
CONF_NAME: "TheOverSwitchMockName",
|
||||
CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
|
||||
CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
|
||||
CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
|
||||
CONF_CYCLE_MIN: 5,
|
||||
CONF_TEMP_MIN: 15,
|
||||
CONF_TEMP_MAX: 30,
|
||||
"eco_temp": 17,
|
||||
"comfort_temp": 18,
|
||||
"boost_temp": 21,
|
||||
CONF_USE_WINDOW_FEATURE: True,
|
||||
CONF_USE_MOTION_FEATURE: False,
|
||||
CONF_USE_POWER_FEATURE: False,
|
||||
CONF_USE_PRESENCE_FEATURE: False,
|
||||
CONF_HEATER: "switch.mock_switch",
|
||||
CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
|
||||
CONF_TPI_COEF_INT: 0.3,
|
||||
CONF_TPI_COEF_EXT: 0.01,
|
||||
CONF_MINIMAL_ACTIVATION_DELAY: 30,
|
||||
CONF_SECURITY_DELAY_MIN: 5,
|
||||
CONF_SECURITY_MIN_ON_PERCENT: 0.3,
|
||||
CONF_WINDOW_AUTO_OPEN_THRESHOLD: 0.1,
|
||||
CONF_WINDOW_AUTO_CLOSE_THRESHOLD: 0.1,
|
||||
CONF_WINDOW_AUTO_MAX_DURATION: 0, # Should be 0 for test
|
||||
},
|
||||
)
|
||||
|
||||
entity: VersatileThermostat = await create_thermostat(
|
||||
hass, entry, "climate.theoverswitchmockname"
|
||||
)
|
||||
assert entity
|
||||
|
||||
tz = get_tz(hass) # pylint: disable=invalid-name
|
||||
now = datetime.now(tz)
|
||||
|
||||
tpi_algo = entity._prop_algorithm
|
||||
assert tpi_algo
|
||||
|
||||
await entity.async_set_hvac_mode(HVACMode.HEAT)
|
||||
await entity.async_set_preset_mode(PRESET_BOOST)
|
||||
assert entity.hvac_mode is HVACMode.HEAT
|
||||
assert entity.preset_mode is PRESET_BOOST
|
||||
assert entity.overpowering_state is None
|
||||
assert entity.target_temperature == 21
|
||||
|
||||
assert entity.window_state is None
|
||||
|
||||
# Make the temperature down
|
||||
with patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
|
||||
) as mock_send_event, patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
|
||||
) as mock_heater_on, patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
|
||||
) as mock_heater_off, patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
|
||||
return_value=True,
|
||||
):
|
||||
event_timestamp = now - timedelta(minutes=4)
|
||||
await send_temperature_change_event(entity, 21.5, event_timestamp)
|
||||
|
||||
# The heater turns on
|
||||
assert mock_heater_on.call_count == 0
|
||||
assert entity.last_temperature_slope is None
|
||||
assert entity._window_auto_algo.is_window_open_detected() is False
|
||||
assert entity._window_auto_algo.is_window_close_detected() is False
|
||||
assert entity.hvac_mode is HVACMode.HEAT
|
||||
assert entity.proportional_algorithm.on_percent == 0.0
|
||||
|
||||
# send one degre down in one minute
|
||||
with patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat.send_event"
|
||||
) as mock_send_event, patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat._async_heater_turn_on"
|
||||
) as mock_heater_on, patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat._async_underlying_entity_turn_off"
|
||||
) as mock_heater_off, patch(
|
||||
"custom_components.versatile_thermostat.climate.VersatileThermostat._is_device_active",
|
||||
return_value=True,
|
||||
):
|
||||
event_timestamp = now - timedelta(minutes=3)
|
||||
await send_temperature_change_event(entity, 20, event_timestamp)
|
||||
|
||||
# The heater turns on but no alert because the heater was not heating
|
||||
assert mock_send_event.call_count == 0
|
||||
assert mock_heater_on.call_count == 1
|
||||
assert mock_heater_off.call_count == 0
|
||||
assert entity.last_temperature_slope == -1.5
|
||||
assert entity._window_auto_algo.is_window_open_detected() is True
|
||||
assert entity._window_auto_algo.is_window_close_detected() is False
|
||||
assert entity.window_auto_state == STATE_OFF
|
||||
assert entity.hvac_mode is HVACMode.HEAT
|
||||
|
||||
@@ -59,6 +59,7 @@
|
||||
},
|
||||
"data_description": {
|
||||
"window_sensor_entity_id": "Leave empty if no window sensor should be use",
|
||||
"window_delay": "The delay in seconds before sensor detection is taken into account",
|
||||
"window_auto_open_threshold": "Recommended value: between 0.05 and 0.1. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_close_threshold": "Recommended value: 0. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_max_duration": "Recommended value: 60 (one hour). Leave empty if automatic window open detection is not use"
|
||||
@@ -97,10 +98,16 @@
|
||||
"title": "Advanced parameters",
|
||||
"description": "Configuration of advanced parameters. Leave the default values if you don't know what you are doing.\nThis parameters can lead to a very bad temperature or power regulation.",
|
||||
"data": {
|
||||
"minimal_activation_delay": "Delay in secondes under which the equipment will not be activated",
|
||||
"security_delay_min": "Maximum allowed delay in minutes between two temperature mesures. Above this delay, the thermostat will turn to a sceurity off state",
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of on_percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
"minimal_activation_delay": "Minimal activation delay",
|
||||
"security_delay_min": "Security delay (in minutes)",
|
||||
"security_min_on_percent": "Minimal power percent for security mode",
|
||||
"security_default_on_percent": "Power percent to use in security mode"
|
||||
},
|
||||
"data_description": {
|
||||
"minimal_activation_delay": "Delay in seconds under which the equipment will not be activated",
|
||||
"security_delay_min": "Maximum allowed delay in minutes between two temperature mesures. Above this delay, the thermostat will turn to a security off state",
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of power percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating power percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
}
|
||||
}
|
||||
},
|
||||
@@ -161,20 +168,21 @@
|
||||
}
|
||||
},
|
||||
"window": {
|
||||
"title": "[%key:component::versatile_thermostat::config::step::window::title%]",
|
||||
"description": "[%key:component::versatile_thermostat::config::step::window::description%]",
|
||||
"title": "Window management",
|
||||
"description": "Open window management.\nLeave corresponding entity_id empty if not used\nYou can also configure automatic window open detection based on temperature decrease",
|
||||
"data": {
|
||||
"window_sensor_entity_id": "[%key:component::versatile_thermostat::config::step::window::data::window_sensor_entity_id%]",
|
||||
"window_delay": "[%key:component::versatile_thermostat::config::step::window::data::window_delay%]",
|
||||
"window_auto_open_threshold": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_open_threshold%]",
|
||||
"window_auto_close_threshold": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_close_threshold%]",
|
||||
"window_auto_max_duration": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_max_duration%]"
|
||||
"window_sensor_entity_id": "Window sensor entity id",
|
||||
"window_delay": "Window sensor delay (seconds)",
|
||||
"window_auto_open_threshold": "Temperature decrease threshold for automatic window open detection (in °/min)",
|
||||
"window_auto_close_threshold": "Temperature increase threshold for end of automatic detection (in °/min)",
|
||||
"window_auto_max_duration": "Maximum duration of automatic window open detection (in min)"
|
||||
},
|
||||
"data_description": {
|
||||
"window_sensor_entity_id": "[%key:component::versatile_thermostat::config::step::window::data_description::window_sensor_entity_id%]",
|
||||
"window_auto_open_threshold": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_open_threshold%]",
|
||||
"window_auto_close_threshold": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_close_threshold%]",
|
||||
"window_auto_max_duration": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_max_duration%]"
|
||||
"window_sensor_entity_id": "Leave empty if no window sensor should be use",
|
||||
"window_delay": "The delay in seconds before sensor detection is taken into account",
|
||||
"window_auto_open_threshold": "Recommended value: between 0.05 and 0.1. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_close_threshold": "Recommended value: 0. Leave empty if automatic window open detection is not use",
|
||||
"window_auto_max_duration": "Recommended value: 60 (one hour). Leave empty if automatic window open detection is not use"
|
||||
}
|
||||
},
|
||||
"motion": {
|
||||
@@ -210,20 +218,26 @@
|
||||
"title": "Advanced parameters",
|
||||
"description": "Configuration of advanced parameters. Leave the default values if you don't know what you are doing.\nThis parameters can lead to a very bad temperature or power regulation.",
|
||||
"data": {
|
||||
"minimal_activation_delay": "Delay in secondes under which the equipment will not be activated",
|
||||
"minimal_activation_delay": "Minimal activation delay",
|
||||
"security_delay_min": "Security delay (in minutes)",
|
||||
"security_min_on_percent": "Minimal power percent for security mode",
|
||||
"security_default_on_percent": "Power percent to use in security mode"
|
||||
},
|
||||
"data_description": {
|
||||
"minimal_activation_delay": "Delay in seconds under which the equipment will not be activated",
|
||||
"security_delay_min": "Maximum allowed delay in minutes between two temperature mesures. Above this delay, the thermostat will turn to a security off state",
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of on_percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
"security_min_on_percent": "Minimal heating percent value for security preset activation. Below this amount of power percent the thermostat won't go into security preset",
|
||||
"security_default_on_percent": "The default heating power percent value in security preset. Set to 0 to switch off heater in security present"
|
||||
}
|
||||
}
|
||||
},
|
||||
"error": {
|
||||
"unknown": "[%key:component::versatile_thermostat::config::error::unknown%]",
|
||||
"unknown_entity": "[%key:component::versatile_thermostat::config::error::unknown_entity%]",
|
||||
"window_open_detection_method": "[%key:component::versatile_thermostat::config::error::window_open_detection_method%]"
|
||||
"unknown": "Unexpected error",
|
||||
"unknown_entity": "Unknown entity id",
|
||||
"window_open_detection_method": "Only one window open detection method should be used. Use sensor or automatic detection through temperature threshold but not both"
|
||||
},
|
||||
"abort": {
|
||||
"already_configured": "[%key:component::versatile_thermostat::config::abort::already_configured%]"
|
||||
"already_configured": "Device is already configured"
|
||||
}
|
||||
},
|
||||
"selector": {
|
||||
|
||||
@@ -51,13 +51,14 @@
|
||||
"description": "Coupe le radiateur si l'ouverture est ouverte.\nLaissez l'entity id vide si non utilisé.",
|
||||
"data": {
|
||||
"window_sensor_entity_id": "Détecteur d'ouverture (entity id)",
|
||||
"window_delay": "Délai avant extinction (seconds)",
|
||||
"window_delay": "Délai avant extinction (secondes)",
|
||||
"window_auto_open_threshold": "seuil haut de chute de température pour la détection automatique (en °/min)",
|
||||
"window_auto_close_threshold": "Seuil bas de chute de température pour la fin de détection automatique (en °/min)",
|
||||
"window_auto_max_duration": "Durée maximum d'une extinction automatique (en min)"
|
||||
},
|
||||
"data_description": {
|
||||
"window_sensor_entity_id": "Laissez vide si vous n'avez de détecteur",
|
||||
"window_delay": "Le délai (en secondes) avant que le changement du détecteur soit pris en compte",
|
||||
"window_auto_open_threshold": "Valeur recommandée: entre 0.05 et 0.1. Laissez vide si vous n'utilisez pas la détection automatique",
|
||||
"window_auto_close_threshold": "Valeur recommandée: 0. Laissez vide si vous n'utilisez pas la détection automatique",
|
||||
"window_auto_max_duration": "Valeur recommandée: 60 (1 heure). Laissez vide si vous n'utilisez pas la détection automatique"
|
||||
@@ -96,8 +97,14 @@
|
||||
"title": "Parameters avancés",
|
||||
"description": "Configuration des paramètres avancés. Laissez les valeurs par défaut si vous ne savez pas ce que vous faites.\nCes paramètres peuvent induire des mauvais comportements du thermostat.",
|
||||
"data": {
|
||||
"minimal_activation_delay": "Délai en secondes en-dessous duquel l'équipement ne sera pas activé",
|
||||
"security_delay_min": "Délai maximal autorisé en minutes entre 2 mesures de températures. Au-dessus de ce délai, le thermostat se mettra en position éteinte de sécurité",
|
||||
"minimal_activation_delay": "Délai minimal d'activation",
|
||||
"security_delay_min": "Délai maximal entre 2 mesures de températures",
|
||||
"security_min_on_percent": "Pourcentage minimal de puissance",
|
||||
"security_default_on_percent": "Pourcentage de puissance a utiliser en mode securité"
|
||||
},
|
||||
"data_description": {
|
||||
"minimal_activation_delay": "Délai en seondes en-dessous duquel l'équipement ne sera pas activé",
|
||||
"security_delay_min": "Délai maximal autorisé en minutes entre 2 mesures de températures. Au-dessus de ce délai, le thermostat se mettra en position de sécurité",
|
||||
"security_min_on_percent": "Seuil minimal de pourcentage de chauffage en-dessous duquel le préréglage sécurité ne sera jamais activé",
|
||||
"security_default_on_percent": "Valeur par défaut pour le pourcentage de chauffage en mode sécurité. Mettre 0 pour éteindre le radiateur en mode sécurité"
|
||||
}
|
||||
@@ -161,20 +168,21 @@
|
||||
}
|
||||
},
|
||||
"window": {
|
||||
"title": "[%key:component::versatile_thermostat::config::step::window::title%]",
|
||||
"description": "[%key:component::versatile_thermostat::config::step::window::description%]",
|
||||
"title": "Gestion d'une ouverture",
|
||||
"description": "Coupe le radiateur si l'ouverture est ouverte.\nLaissez l'entity id vide si non utilisé.",
|
||||
"data": {
|
||||
"window_sensor_entity_id": "[%key:component::versatile_thermostat::config::step::window::data::window_sensor_entity_id%]",
|
||||
"window_delay": "[%key:component::versatile_thermostat::config::step::window::data::window_delay%]",
|
||||
"window_auto_open_threshold": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_open_threshold%]",
|
||||
"window_auto_close_threshold": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_close_threshold%]",
|
||||
"window_auto_max_duration": "[%key:component::versatile_thermostat::config::step::window::data::window_auto_max_duration%]"
|
||||
"window_sensor_entity_id": "Détecteur d'ouverture (entity id)",
|
||||
"window_delay": "Délai avant extinction (secondes)",
|
||||
"window_auto_open_threshold": "seuil haut de chute de température pour la détection automatique (en °/min)",
|
||||
"window_auto_close_threshold": "Seuil bas de chute de température pour la fin de détection automatique (en °/min)",
|
||||
"window_auto_max_duration": "Durée maximum d'une extinction automatique (en min)"
|
||||
},
|
||||
"data_description": {
|
||||
"window_sensor_entity_id": "[%key:component::versatile_thermostat::config::step::window::data_description::window_sensor_entity_id%]",
|
||||
"window_auto_open_threshold": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_open_threshold%]",
|
||||
"window_auto_close_threshold": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_close_threshold%]",
|
||||
"window_auto_max_duration": "[%key:component::versatile_thermostat::config::step::window::data_description::window_auto_max_duration%]"
|
||||
"window_sensor_entity_id": "Laissez vide si vous n'avez de détecteur",
|
||||
"window_delay": "Le délai (en secondes) avant que le changement du détecteur soit pris en compte",
|
||||
"window_auto_open_threshold": "Valeur recommandée: entre 0.05 et 0.1. Laissez vide si vous n'utilisez pas la détection automatique",
|
||||
"window_auto_close_threshold": "Valeur recommandée: 0. Laissez vide si vous n'utilisez pas la détection automatique",
|
||||
"window_auto_max_duration": "Valeur recommandée: 60 (1 heure). Laissez vide si vous n'utilisez pas la détection automatique"
|
||||
}
|
||||
},
|
||||
"motion": {
|
||||
@@ -210,20 +218,26 @@
|
||||
"title": "Parameters avancés",
|
||||
"description": "Configuration des paramètres avancés. Laissez les valeurs par défaut si vous ne savez pas ce que vous faites.\nCes paramètres peuvent induire des mauvais comportements du thermostat.",
|
||||
"data": {
|
||||
"minimal_activation_delay": "Délai minimal d'activation",
|
||||
"security_delay_min": "Délai maximal entre 2 mesures de températures",
|
||||
"security_min_on_percent": "Pourcentage minimal de puissance",
|
||||
"security_default_on_percent": "Pourcentage de puissance a utiliser en mode securité"
|
||||
},
|
||||
"data_description": {
|
||||
"minimal_activation_delay": "Délai en seondes en-dessous duquel l'équipement ne sera pas activé",
|
||||
"security_delay_min": "Délai maximal autorisé en minutes entre 2 mesures de températures. Au-dessus de ce délai, le thermostat se mettra en position éteinte de sécurité",
|
||||
"security_delay_min": "Délai maximal autorisé en minutes entre 2 mesures de températures. Au-dessus de ce délai, le thermostat se mettra en position de sécurité",
|
||||
"security_min_on_percent": "Seuil minimal de pourcentage de chauffage en-dessous duquel le préréglage sécurité ne sera jamais activé",
|
||||
"security_default_on_percent": "Valeur par défaut pour le pourcentage de chauffage en mode sécurité. Mettre 0 pour éteindre le radiateur en mode sécurité"
|
||||
}
|
||||
}
|
||||
},
|
||||
"error": {
|
||||
"unknown": "[%key:component::versatile_thermostat::config::error::unknown%]",
|
||||
"unknown_entity": "[%key:component::versatile_thermostat::config::error::unknown_entity%]",
|
||||
"window_open_detection_method": "[%key:component::versatile_thermostat::config::error::window_open_detection_method%]"
|
||||
"unknown": "Erreur inattendue",
|
||||
"unknown_entity": "entity id inconnu",
|
||||
"window_open_detection_method": "Une seule méthode de détection des ouvertures ouvertes doit être utilisée. Utilisez le détecteur d'ouverture ou les seuils de température mais pas les deux."
|
||||
},
|
||||
"abort": {
|
||||
"already_configured": "[%key:component::versatile_thermostat::config::abort::already_configured%]"
|
||||
"already_configured": "Le device est déjà configuré"
|
||||
}
|
||||
},
|
||||
"selector": {
|
||||
|
||||
BIN
images/config-window-auto.png
Normal file
BIN
images/config-window-auto.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 60 KiB |
BIN
images/config-window-sensor.png
Normal file
BIN
images/config-window-sensor.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 61 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 23 KiB |
BIN
images/new-icon.png
Normal file
BIN
images/new-icon.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 6.7 KiB |
BIN
images/temperature-slope.png
Normal file
BIN
images/temperature-slope.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 4.0 KiB |
BIN
images/window-auto-tuning.png
Normal file
BIN
images/window-auto-tuning.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 152 KiB |
Reference in New Issue
Block a user