update username password and routers of https://github.com/Ullaakut/cameradar/issues/343 (#346)

* Update credentials.json

* Update routes

* Update credentials.json

.github/FUNDING.yml

@@ -0,0 +1,12 @@
+# These are supported funding model platforms
+
+github: [ullaakut] # Replace with up to 4 GitHub Sponsors-enabled usernames e.g., [user1, user2]
+patreon: # Replace with a single Patreon username
+open_collective: # Replace with a single Open Collective username
+ko_fi: # Replace with a single Ko-fi username
+tidelift: # Replace with a single Tidelift platform-name/package-name e.g., npm/babel
+community_bridge: # Replace with a single Community Bridge project-name e.g., cloud-foundry
+liberapay: # Replace with a single Liberapay username
+issuehunt: # Replace with a single IssueHunt username
+otechie: # Replace with a single Otechie username
+custom: # Replace with up to 4 custom sponsorship URLs e.g., ['link1', 'link2']

.github/ISSUE_TEMPLATE.md

@@ -24,6 +24,7 @@ Please select one:
 ## Environment
 
 My operating system:
+
 - [ ] Windows
 - [ ] OSX
 - [ ] Linux
@@ -34,17 +35,17 @@ OS architecture: <architecture>
 
 ## Issue
 
-### What was expected?
+### What was expected
 
 <expected behavior>
 
-### What happened?
+### What happened
 
 <observed behavior>
 
 ### Logs
 
-If your issue is with Cameradar's binary or docker image, please run it with `-l` to print logs, and paste them here:
+If your issue is with Cameradar's binary or docker image, please run it with `-v` to print verbose logs, and paste them here:
 
 ```
 <cameradar logs>

.gitignore

@@ -2,9 +2,9 @@
 .idea/
 .vscode/
 
-# Deps
-/vendor
-
 # Golang
 /bin/*
 /pkg/*
+
+# Builds
+dist/

.golangci.yml

@@ -0,0 +1,7 @@
+# https://github.com/golangci/golangci/wiki/Configuration
+
+service:
+  project-path: github.com/Ullaakut/cameradar
+  prepare:
+    - apt-get update && apt-get install -y libcurl4-gnutls-dev
+    - dep ensure

.goreleaser.yml

@@ -0,0 +1,43 @@
+project_name: cameradar
+dist: dist/cameradar
+
+env:
+  - GO111MODULE=on
+before:
+  hooks:
+    - go mod download
+
+builds:
+  - binary: cameradar
+    main: ./cmd/cameradar
+    goos:
+      - windows
+      - darwin
+      - linux
+    goarch:
+      - amd64
+      - 386
+      - arm
+      - arm64
+    goarm:
+      - 6
+      - 7
+
+    ignore:
+      - goos: darwin
+        goarch: 386
+
+changelog:
+  skip: true
+
+checksum:
+  name_template: "{{ .ProjectName }}_checksums.txt"
+
+archives:
+  - name_template: "{{ .Binary }}_{{ .Os }}_{{ .Arch }}{{ if .Arm}}v{{ .Arm }}{{ end }}"
+    format: tar.gz
+    format_overrides:
+      - goos: windows
+        format: zip
+    files:
+      - CHANGELOG.md

.travis.yml

@@ -2,11 +2,21 @@ dist: trusty
 sudo: required
 language: go
 
-env:
-  - DEP_VERSION="0.4.1"
+addons:
+  apt:
+    packages:
+    # needed for the nfpm pipe:
+    - rpm
+    # needed for the snap pipe:
+    - snapd
 
-services:  
-    - docker
+env:
+  - GO111MODULE=on
+  # needed for the snap pipe:
+  - PATH=/snap/bin:$PATH
+
+services:
+  - docker
 
 before_install:
 - echo "Testing Docker Hub credentials"
@@ -18,38 +28,34 @@ before_install:
 - sudo apt-get remove docker docker-engine docker.io
 - curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
 - sudo apt-get update
-- sudo apt-get install -y docker-ce
+- sudo apt-get install -y docker-ce nmap libcurl4-openssl-dev
 - go get github.com/mattn/goveralls
-- go get github.com/andelf/go-curl
-- go get github.com/pkg/errors
-- go get gopkg.in/go-playground/validator.v9
-- go get github.com/stretchr/testify/assert
 - docker version
-- curl -L -s https://github.com/golang/dep/releases/download/v${DEP_VERSION}/dep-linux-amd64 -o $GOPATH/bin/dep
-- chmod +x $GOPATH/bin/dep
 
 install:
-- dep ensure
 - docker build -t cameradar .
 
 script:
 # Run unit tests
-- go test -v -covermode=count -coverprofile=coverage.out
-- $HOME/gopath/bin/goveralls -coverprofile=coverage.out -service=travis-ci -repotoken $COVERALLS_TOKEN
-# Launch a fake camera to check if cameradar is able to access it
-- docker run -d --name=fake_camera -e RTSP_USERNAME=admin -e RTSP_PASSWORD=12345 -p 8554:8554 ullaakut/rtspatt
+- GO111MODULE=on go test -v -covermode=count -coverprofile=coverage.out
+- GO111MODULE=on $HOME/gopath/bin/goveralls -coverprofile=coverage.out -service=travis-ci -repotoken=$COVERALLS_TOKEN
+# Launch fake cameras to check if cameradar is able to access them
+- docker run -d --name="fake_camera_digest" -e RTSP_ROUTE="/live.sdp" -e RTSP_USERNAME="admin" -e RTSP_PASSWORD="12345" -e RTSP_AUTHENTICATION_METHOD="digest" -p 8554:8554 ullaakut/rtspatt
+- docker run -d --name="fake_camera_basic" -e RTSP_ROUTE="/live.sdp" -e RTSP_USERNAME="root" -e RTSP_PASSWORD="root" -e RTSP_AUTHENTICATION_METHOD="digest" -p 5554:5554 ullaakut/rtspatt
 # Launch cameradar on the local machine
-- docker run --net=host -t cameradar -t 0.0.0.0 -l > logs.txt
-- docker logs fake_camera > camera_logs.txt
-# Stop the fake camera
-- docker stop fake_camera
+- docker run --net=host -t cameradar -t 0.0.0.0 -p 8554,5554 -v > logs.txt
+# Gather the logs from the cameras
+- docker logs fake_camera_digest > camera_digest_logs.txt
+- docker logs fake_camera_basic > camera_basic_logs.txt
+# Stop the fake cameras
+- docker stop fake_camera_basic
+- docker stop fake_camera_digest
 # Print logs
-- cat camera_logs.txt
+- cat camera_digest_logs.txt
+- cat camera_basic_logs.txt
 - cat logs.txt
-# check if file contains more than one line
-# 1 line: Error message because no streams were found
-# More lines: Logs for all found cameras
-- if [[ $(wc -l <logs.txt) -lt 2 ]]; then exit 1; fi
+- grep "Successful attack" logs.txt || exit 1
+- git clean -fd
 
 notifications:
   email:

CHANGELOG.md

@@ -1,222 +0,0 @@
-# Cameradar Changelog
-
-This file lists all versions of the repository and precises all changes.
-
-## v2.0.0
-
-#### Major changes:
-
-* Cameradar is no longer a C++ application but a Golang library
-* It is also a Golang application replacing the former C++ one (the C++ Cameradar image can still be used with the tag `1.1.4`)
-* The new docker image is twice lighter (14MB vs 379MB before)
-* The Cameradar golang library enables users to build their own application around camera discovery and attack. Example of applications could be an automatic camera discovery daemon with scheduled scans, a security audit tool to check if CCTV cameras are protected from attacks by being isolated and having strong passwords, etc.
-
-## v1.1.4
-
-#### Minor changes:
-
-* Simplified use of Docker image
-* Renamed MySQL table name to be more explicit
-* Refactoring of the Golang functional tester done
-* The output was made more human readable
-* Added automatic code quality checks for pull requests
-* Added contribution documentation
-* Updated dictionaries to add user suggestions for Chinese cameras
-* Enhanced `result.json` file's format
-
-#### Bugfixes:
-
-* Fixed a bug in the functional testing in which if the `result.json` file was not formatted correctly, the test failed but was still considered a success.
-
-## v1.1.3
-
-#### Minor changes:
-
-* Added automatic pushes to DockerHub to the travis integration
-* Made travis configuration file better
-* Changed the package generation scripts to make them report errors
-* Removed old etix_rtsp_server binary from the test folder
-
-#### Bugfixes:
-
-* Fixed an issue that made it mandatory to launch tests at least once so that they can work the second time
-* Fixed an issue that made the golang testing tool not compile in the testing script
-* Fixed an issue that made the golang testing tool sometimes ignore some tests
-* The previous known issue has been investigated and we don't know where it came from. However after a night of testing I have been unable to reproduce it, so I will consider it closed
-
-## v1.1.2
-
-#### Minor changes:
-
-* Added travis integration
-* Added default environment value for Docker deployment
-* Updated docker image description with new easy usage
-* Updated README badges style (replaced flat with square-flat)
-* Build last package can now also generate a debug package if given the `Debug` command-line argument
-
-#### Known issues
-
-* There is still the issue with Camera Emulation Server, see the [previous version's patchnote](#v1.1.1) for more information.
-
-## v1.1.1
-
-#### Minor changes:
-
-* Removed unnecessary null pointer checks (thanks to https://github.com/elfring)
-* Updated package description
-* Removed debug message in CMake build
-* Added `/ch01.264` to the URL dictionary in the deployment (Comelit default RTSP URL)
-* Updated tests partially (still needs work to make the code cleaner)
-  * Variable names are now compliant with Golang best practices
-  * JSON variable names are back to normal
-  * Functions have been moved in more appropriate source files
-  * Structure definitions have been moved in more appropriate source files
-  * Source files have been renamed to be more relevant
-  * JUnit output now considers each camera as a test case
-  * JUnit output now contains errors which makes debugging much easier
-* Added header files where it was forgotten
-
-#### Bugfixes:
-
-* Fixed an issue where if you loose your internet connection during thumbnail generation, FFMpeg would get stuck forever and thus Cameradar would never finish
-* Fixed an issue where multithreading could cause crashes
-* Fixed an issue where the routes dictionary was mistaken for the credentials dictionary
-* Fixed issues with the golang testing tool
-  * Fixed automated camera generation
-  * Fixed docker IP address resolution
-
-#### Known issues:
-
-* There is an issue with Camera Emulation Server that makes it impossible for Cameradar to generate thumbnails, which is why right now the verification of the thumbnails presence is commented and it is assumed correct. It is probably an issue with GST-RTSP-Server but requires investigation.
-
-## v1.1.0
-
-#### Major changes:
-
-* There are more command line options
-  * Port can now be overridden in the command line
-  * Target can now be overridden in the command line
-* Bruteforce is now multithreaded and will use as many threads as there are discovered cameras
-* Thumbnail generation is now multithreaded and will use as many threads as there are discovered cameras
-* There are now default configuration values in order to make cameradar easier to use
-
-#### Minor changes:
-
-* The algorithms take external input into account (so that a 3rd party can change the DB to help Cameradar in real-time) and thus check the persistent data at each iteration
-* The default log level is now DEBUG instead of INFO
-* The attack logs are now INFO instead of DEBUG
-* The thumbnail generation logs are now INFO instead of DEBUG
-
-#### Bugs fixed
-
-* Fixed a bug in which the MySQL cache manager would consider a camera with known ids as having a valid path even if it weren't
-* Fixed a bug in which TCP RTSP streams would not generate thumbnails
-
-## v1.0.5
-
-* Fixed error in MySQL Cache Manager in which thumbnail generation on valid streams could not be done
-* Fixed potential crash in the case the machine running cameradar has no memory left to allocate space for the dynamic cache manager
-
-## v1.0.4
-
-#### Bugs fixed:
-
-* Fixed nmap package detection
-
-## v1.0.3
-
-#### Bugs fixed:
-
-* Corrected GStreamer check
-
-## v1.0.2
-
-#### Bugs fixed:
-
-* Fixed issues in MySQL Cache Manager
-
-#### Minor changes:
-
-* Added useful debug logs
-
-## v1.0.1
-
-### Ubuntu 16.04 Release
-
-#### Major changes:
-
-* The Docker deployment is now done using Ubuntu 16.04 instead of Ubuntu 15.10, so that it uses more recent packages.
-
-#### Minor changes:
-
-* Removed useless dependencies
-
-## v1.0.0
-
-### First production-ready release
-
-#### Major changes:
-
-* Added functional testing
-
-## v0.2.2
-
-After doing some testing on a weirdly configured camera network in a far away Datacenter, I discovered that some Cameras needed a few tweaks to the Cameradar attack method in order to be accessed.
-
-#### Major changes:
-
-* Cameradar can access Cameras that are configured to always send 400 Bad Requests responses
-
-#### Minor changes:
-
-* Changed iterator name from `it` to `stream` in dumb cache manager to improve code readability
-
-#### Bugfixes:
-
-* Cameradar no longer considers a timing out Camera as an accessible stream
-
-## v0.2.1
-
-This package adds fixes the Docker deployment package.
-
-#### Minor changes
-
-* Fixed the Docker deployment package
-* Updated README
-
-## v0.2.0
-
-### MySQL Cache Manager Release
-
-This package adds a new cache manager using a MySQL database, that can store the results between mutiple uses.
-
-#### Major changes
-
-* Added a MySQL Cache Manager
-
-#### Minor changes
-
-* Removed legacy code
-* Removed boost dependency
-* Improved debugging logs
-
-## v0.1.1
-
-### Docker release
-
-This package adds a way to deploy Cameradar using Docker.
-
-#### Major changes
-
-* Added a quick Docker deployment process
-* Added automatic dependencies downloading through CMake for the manual installation
-* Added CPack packaging for the Docker deployment
-
-#### Minor changes
-
-* Changed recommended cloning method to HTTPS
-* Added lots of informations to README.md
-
-## v0.1.0
-
-This package was the first OpenSource version of Cameradar. It contained only a simple cache manager and had some bugs.

CONTRIBUTING.md

@@ -1,82 +0,0 @@
-# Cameradar Contribution
-
-This file will give you guidelines on how to contribute if you want to, and will list known contributors to this repo.
-
-If you're not into software development or not into Golang, you can still help. Updating the dictionaries for example, would be a really cool contribution! Just make sure the credentials and routes you add are **default constructor credentials** and not custom credentials.
-
-If you have other cool ideas, feel free to share them with me at [brendan.leglaunec@etixgroup.com](mailto:brendan.leglaunec@etixgroup.com) or to directly [create an issue](https://github.com/Ullaakut/cameradar/issues)!
-
-## Version 2.0.0
-
-*Cameradar* is the name of the Golang library and the binary that serves as an example of its use, as well as the docker image that runs the binary.
-
-The 2.0.0 version was a complete refactorring of the Cameradar C++ tool, which came from the fact that most users who want to access cameras either wanted to launch it with the basic cache manager, mostly using the docker image already provided in this repository, or did not use it because it did not integrate into their software solution easily.
-
-Transforming it into a library allowed developers to use it directly in their own code exactly as they want, allowing for a greater flexibility. The Cameradar binary also provides a simple use example as well as maintains the old simple way of using Cameradar for non-developers.
-
-## Workflow
-
-### Branches & issues
-
-If you want to work on an issue, make sure you create a specific branch for this issue using the format `issue_number-solution_explanation`. Examples are:
-
-If issue `#64` is `Improve network scan performance`, the branch to fix it should be something like: `64-improve-network-scan-performance`. Note that it should always start with a verb conjugated in the infinitive form, and describe what the commits's effects will be on the codebase. One branch should only be for one change. If your branch fixes multiple things, you're doing it wrong.
-
-Always make sure you're not working on the same issue as someone else, by asking on the issue thread to be assigned to it.
-
-### Commit names
-
-The name of the commits should always be #[issue number] [effect of the issue] (ex: `#343 Improve test coverage`).
-
-When working on your local branch, you can do as many commits as you want, obviously. The most important is that you squash your commits before creating your pull request, or at least before it is merged.
-
-In case you're not familiar with squashing, here is a simple way to do it :
-
-- `git fetch origin` will make sure that you have a local version of the origin repository that is up to date (will not overwrite anything on your branch, no worries)
-- `git rebase -i origin/master` will start the process of rebasing your branch
-- This will open a file letting you decide what to do with the commits. You want to keep the first `pick` and write `s` or `squash` instead of `pick` for all other commits below.
-- If there are conflicts, you will fix them step by step by following what git tells you, it's pretty straight-forward.
-- If there are no conflicts or if they are resolved, git will let you edit the commit names. Don't forget to comment the commit names of the commits you squashed if they are not relevant by adding a # character in front of the commit message, and make sure that the commit message you left follows the aforementioned guidelines.
-- Now run `git log`, you should see only one commit by the name you chose during the rebase.
-- You can now `git push -f` if you already pused your branch on origin or simply push without the `-f` if it's your first push on origin. The reason for the `-f` is that when you squash your commits, you create a new one that will conflict with the state of your branch on origin. If you pull, it will overwrite your local state, so don't do that except if you messed up your rebase.
-
-### Pull Requests
-
-When your pull request is created, GitHub will first check for conflicts, Codacy will check the shell and C++ code's quality and then Travis CI will try to build and launch functional tests of your versions of Cameradar.
-
-If GitHub reports conflicts with the develop branch, you should resolve them by yourself using your git command-line interface. The easiest and cleanest way is to use `git rebase -i origin/develop` and follow git's instructions.
-If Codacy reports new issues, they will be added in the comments of the PR to let you know what you should fix.
-If Travis CI reports errors, you should be able to view the logs [by clicking here](https://travis-ci.org/Ullaakut/cameradar/builds) and you should fix it. No PR will be merged before all tests are passing correctly.
-
-When creating your pull request, our hooks will make sure that your code:
-
-- Builds
-- Has 100% passing unit tests
-- Can actually access a camera using a functional test
-- Still has equivalent or higher test coverage (using coveralls)
-
-Make sure to write in the PR description what issue it fixes. GitHub will intepret it and automatically close the issue once your pull request is closed. Just write Fixes #IssueNumber in the description.
-
-When your pull request is created, GitHub will first check for conflicts and then your code will be reviewed by the maintainers of this repository.
-
-If GitHub reports conflicts with the `master` branch, you should resolve them by yourself using your git command-line interface. The easiest and cleanest way is to use `git rebase -i origin/master` and follow git's instructions. If we report issues with your code, you should resolve them and then ping the person that reported them to notify them that you did the requested changes.
-
-Once everything is in order, we will merge your pull request.
-
-### Coding guidelines
-
-Your code should just
-
-- Not decrease the results of Cameradar on https://goreportcard.com/report/github.com/Ullaakut/cameradar
-- Pass the code review
-
-#### Golang
-
-- All Golang code has to be formated using `gofmt` or `goreturns`.
-- Make sure you follow the Golang [best practices](https://golang.org/doc/effective_go.html)
-
-## Contributors
-
-- **Brendan Le Glaunec** - [@Ullaakut](https://github.com/Ullaakut) - brendan.leglaunec@etixgroup.com : *Original developer & Maintainer*
-- **Jeremy Letang** - [@jeremyletang](https://github.com/jeremyletang) - letang.jeremy@gmail.com : *Idea of the project & Mentorship*
-- **ishanjain28** - [@ishanjain28](https://github.com/ishanjain28) - ishanjain28@gmail.com : *Implemented the environment variables support*

Dockerfile

@@ -2,7 +2,7 @@
 FROM golang:alpine AS build-env
 
 COPY . /go/src/github.com/Ullaakut/cameradar
-WORKDIR /go/src/github.com/Ullaakut/cameradar/cameradar
+WORKDIR /go/src/github.com/Ullaakut/cameradar/cmd/cameradar
 
 RUN apk update && \
     apk upgrade && \
@@ -12,19 +12,27 @@ RUN apk update && \
     libc-dev \
     git \
     pkgconfig
-ENV DEP_VERSION="0.4.1"
-RUN curl -L -s https://github.com/golang/dep/releases/download/v${DEP_VERSION}/dep-linux-amd64 -o $GOPATH/bin/dep
-RUN chmod +x $GOPATH/bin/dep
-RUN dep ensure
+ENV GO111MODULE=on
+RUN go version
 RUN go build -o cameradar
 
 # Final stage
 FROM alpine
 
-RUN apk --update add --no-cache nmap nmap-nselibs nmap-scripts \
-    curl-dev
+# Necessary to install curl v7.64.0-r3.
+# Fix for https://github.com/Ullaakut/cameradar/issues/247
+RUN echo 'http://dl-cdn.alpinelinux.org/alpine/v3.9/main' >> /etc/apk/repositories
+
+RUN apk --update add --no-cache nmap \
+    nmap-nselibs \
+    nmap-scripts \
+    curl-dev==7.64.0-r5
 
 WORKDIR /app/cameradar
 COPY --from=build-env /go/src/github.com/Ullaakut/cameradar/dictionaries/ /app/dictionaries/
-COPY --from=build-env /go/src/github.com/Ullaakut/cameradar/cameradar/ /app/cameradar/
-ENTRYPOINT ["/app/cameradar/cameradar", "-r", "/app/dictionaries/routes", "-c", "/app/dictionaries/credentials.json"]
+COPY --from=build-env /go/src/github.com/Ullaakut/cameradar/cmd/cameradar/ /app/cameradar/
+
+ENV CAMERADAR_CUSTOM_ROUTES="/app/dictionaries/routes"
+ENV CAMERADAR_CUSTOM_CREDENTIALS="/app/dictionaries/credentials.json"
+
+ENTRYPOINT ["/app/cameradar/cameradar"]

Gopkg.lock

@@ -1,213 +0,0 @@
-# This file is autogenerated, do not edit; changes may be undone by the next 'dep ensure'.
-
-
-[[projects]]
-  branch = "master"
-  name = "github.com/andelf/go-curl"
-  packages = ["."]
-  revision = "f8b334df3789fbdf98df3b3b22815e958b956c19"
-
-[[projects]]
-  name = "github.com/davecgh/go-spew"
-  packages = ["spew"]
-  revision = "346938d642f2ec3594ed81d874461961cd0faa76"
-  version = "v1.1.0"
-
-[[projects]]
-  name = "github.com/fatih/color"
-  packages = ["."]
-  revision = "570b54cabe6b8eb0bc2dfce68d964677d63b5260"
-  version = "v1.5.0"
-
-[[projects]]
-  name = "github.com/fsnotify/fsnotify"
-  packages = ["."]
-  revision = "c2828203cd70a50dcccfb2761f8b1f8ceef9a8e9"
-  version = "v1.4.7"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/gernest/wow"
-  packages = [
-    ".",
-    "spin"
-  ]
-  revision = "7e0b2a2398989a5d220eebac5742d45422ba7de8"
-
-[[projects]]
-  name = "github.com/go-playground/locales"
-  packages = [
-    ".",
-    "currency"
-  ]
-  revision = "e4cbcb5d0652150d40ad0646651076b6bd2be4f6"
-  version = "v0.11.2"
-
-[[projects]]
-  name = "github.com/go-playground/universal-translator"
-  packages = ["."]
-  revision = "b32fa301c9fe55953584134cb6853a13c87ec0a1"
-  version = "v0.16.0"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/hashicorp/hcl"
-  packages = [
-    ".",
-    "hcl/ast",
-    "hcl/parser",
-    "hcl/scanner",
-    "hcl/strconv",
-    "hcl/token",
-    "json/parser",
-    "json/scanner",
-    "json/token"
-  ]
-  revision = "23c074d0eceb2b8a5bfdbb271ab780cde70f05a8"
-
-[[projects]]
-  name = "github.com/magefile/mage"
-  packages = [
-    "mg",
-    "sh",
-    "types"
-  ]
-  revision = "ab3ca2f6f85577d7ec82e0a6df721147a2e737f9"
-  version = "v2.0.1"
-
-[[projects]]
-  name = "github.com/magiconair/properties"
-  packages = ["."]
-  revision = "d419a98cdbed11a922bf76f257b7c4be79b50e73"
-  version = "v1.7.4"
-
-[[projects]]
-  name = "github.com/mattn/go-colorable"
-  packages = ["."]
-  revision = "167de6bfdfba052fa6b2d3664c8f5272e23c9072"
-  version = "v0.0.9"
-
-[[projects]]
-  name = "github.com/mattn/go-isatty"
-  packages = ["."]
-  revision = "0360b2af4f38e8d38c7fce2a9f4e702702d73a39"
-  version = "v0.0.3"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/mitchellh/mapstructure"
-  packages = ["."]
-  revision = "b4575eea38cca1123ec2dc90c26529b5c5acfcff"
-
-[[projects]]
-  name = "github.com/pelletier/go-toml"
-  packages = ["."]
-  revision = "acdc4509485b587f5e675510c4f2c63e90ff68a8"
-  version = "v1.1.0"
-
-[[projects]]
-  name = "github.com/pkg/errors"
-  packages = ["."]
-  revision = "645ef00459ed84a119197bfb8d8205042c6df63d"
-  version = "v0.8.0"
-
-[[projects]]
-  name = "github.com/pmezard/go-difflib"
-  packages = ["difflib"]
-  revision = "792786c7400a136282c1664665ae0a8db921c6c2"
-  version = "v1.0.0"
-
-[[projects]]
-  name = "github.com/spf13/afero"
-  packages = [
-    ".",
-    "mem"
-  ]
-  revision = "bb8f1927f2a9d3ab41c9340aa034f6b803f4359c"
-  version = "v1.0.2"
-
-[[projects]]
-  name = "github.com/spf13/cast"
-  packages = ["."]
-  revision = "acbeb36b902d72a7a4c18e8f3241075e7ab763e4"
-  version = "v1.1.0"
-
-[[projects]]
-  branch = "master"
-  name = "github.com/spf13/jwalterweatherman"
-  packages = ["."]
-  revision = "7c0cea34c8ece3fbeb2b27ab9b59511d360fb394"
-
-[[projects]]
-  name = "github.com/spf13/pflag"
-  packages = ["."]
-  revision = "e57e3eeb33f795204c1ca35f56c44f83227c6e66"
-  version = "v1.0.0"
-
-[[projects]]
-  name = "github.com/spf13/viper"
-  packages = ["."]
-  revision = "25b30aa063fc18e48662b86996252eabdcf2f0c7"
-  version = "v1.0.0"
-
-[[projects]]
-  name = "github.com/stretchr/objx"
-  packages = ["."]
-  revision = "facf9a85c22f48d2f52f2380e4efce1768749a89"
-  version = "v0.1"
-
-[[projects]]
-  name = "github.com/stretchr/testify"
-  packages = [
-    "assert",
-    "mock"
-  ]
-  revision = "12b6f73e6084dad08a7c6e575284b177ecafbc71"
-  version = "v1.2.1"
-
-[[projects]]
-  branch = "master"
-  name = "golang.org/x/crypto"
-  packages = ["ssh/terminal"]
-  revision = "1875d0a70c90e57f11972aefd42276df65e895b9"
-
-[[projects]]
-  branch = "master"
-  name = "golang.org/x/sys"
-  packages = [
-    "unix",
-    "windows"
-  ]
-  revision = "8f27ce8a604014414f8dfffc25cbcde83a3f2216"
-
-[[projects]]
-  branch = "master"
-  name = "golang.org/x/text"
-  packages = [
-    "internal/gen",
-    "internal/triegen",
-    "internal/ucd",
-    "transform",
-    "unicode/cldr",
-    "unicode/norm"
-  ]
-  revision = "e19ae1496984b1c655b8044a65c0300a3c878dd3"
-
-[[projects]]
-  name = "gopkg.in/go-playground/validator.v9"
-  packages = ["."]
-  revision = "48a433ba4bcadc5be9aa16d4bdcb383d3f57a741"
-  version = "v9.9.3"
-
-[[projects]]
-  branch = "v2"
-  name = "gopkg.in/yaml.v2"
-  packages = ["."]
-  revision = "d670f9405373e636a5a2765eea47fac0c9bc91a4"
-
-[solve-meta]
-  analyzer-name = "dep"
-  analyzer-version = 1
-  inputs-digest = "cd90160a373567d6046fe1f1f30e822740533c06a766bcb75d2ed83820cd8526"
-  solver-name = "gps-cdcl"
-  solver-version = 1

Gopkg.toml

@@ -1,62 +0,0 @@
-# Gopkg.toml example
-#
-# Refer to https://github.com/golang/dep/blob/master/docs/Gopkg.toml.md
-# for detailed Gopkg.toml documentation.
-#
-# required = ["github.com/user/thing/cmd/thing"]
-# ignored = ["github.com/user/project/pkgX", "bitbucket.org/user/project/pkgA/pkgY"]
-#
-# [[constraint]]
-#   name = "github.com/user/project"
-#   version = "1.0.0"
-#
-# [[constraint]]
-#   name = "github.com/user/project2"
-#   branch = "dev"
-#   source = "github.com/myfork/project2"
-#
-# [[override]]
-#   name = "github.com/x/y"
-#   version = "2.4.0"
-#
-# [prune]
-#   non-go = false
-#   go-tests = true
-#   unused-packages = true
-
-
-[[constraint]]
-  branch = "master"
-  name = "github.com/andelf/go-curl"
-
-[[constraint]]
-  name = "github.com/fatih/color"
-  version = "1.5.0"
-
-[[constraint]]
-  branch = "master"
-  name = "github.com/gernest/wow"
-
-[[constraint]]
-  name = "github.com/pkg/errors"
-  version = "0.8.0"
-
-[[constraint]]
-  name = "github.com/spf13/pflag"
-  version = "1.0.0"
-
-[[constraint]]
-  name = "github.com/spf13/viper"
-  version = "1.0.0"
-
-[[constraint]]
-  name = "github.com/stretchr/testify"
-  version = "1.2.1"
-
-[[constraint]]
-  name = "gopkg.in/go-playground/validator.v9"
-  version = "9.9.3"
-
-[prune]
-  go-tests = true
-  unused-packages = true

README.md

@@ -1,7 +1,7 @@
 # Cameradar
 
 <p align="center">
-    <img src="https://raw.githubusercontent.com/Ullaakut/cameradar/master/images/Cameradar.gif" width="100%"/>
+    <img src="images/Cameradar.gif" width="100%"/>
 </p>
 
 <p align="center">
@@ -17,17 +17,17 @@
     <a href='https://coveralls.io/github/Ullaakut/cameradar?branch=master'>
         <img src='https://coveralls.io/repos/github/Ullaakut/cameradar/badge.svg?branch=master' alt='Coverage Status' />
     </a>
-    <a href="https://golangci.com/r/github.com/Ullaakut/cameradar">
-        <img src="https://golangci.com/badges/github.com/Ullaakut/cameradar.svg" />
+    <a href="https://golangci.com/r/github.com/ullaakut/cameradar">
+        <img src="https://golangci.com/badges/github.com/ullaakut/cameradar.svg" />
     </a>
-    <a href="https://goreportcard.com/report/github.com/Ullaakut/cameradar">
-        <img src="https://goreportcard.com/badge/github.com/Ullaakut/cameradar" />
+    <a href="https://goreportcard.com/report/github.com/ullaakut/cameradar">
+        <img src="https://goreportcard.com/badge/github.com/ullaakut/cameradar" />
     </a>
-    <a href="https://github.com/Ullaakut/cameradar/releases/latest">
+    <a href="https://github.com/ullaakut/cameradar/releases/latest">
         <img src="https://img.shields.io/github/release/Ullaakut/cameradar.svg?style=flat" />
     </a>
-    <a href="https://godoc.org/github.com/Ullaakut/cameradar">
-        <img src="https://godoc.org/github.com/Ullaakut/cameradar?status.svg" />
+    <a href="https://godoc.org/github.com/ullaakut/cameradar">
+        <img src="https://godoc.org/github.com/ullaakut/cameradar?status.svg" />
     </a>
 </p>
 
@@ -41,7 +41,7 @@
 * Launch automated dictionary attacks to get the **username and password** of the cameras
 * Retrieve a complete and user-friendly report of the results
 
-<p align="center"><img src="https://raw.githubusercontent.com/Ullaakut/cameradar/master/images/Cameradar.png" width="250"/></p>
+<p align="center"><img src="images/Cameradar.png" width="250"/></p>
 
 ## Table of content
 
@@ -49,13 +49,15 @@
 * [Configuration](#configuration)
 * [Output](#output)
 * [Check camera access](#check-camera-access)
-* [Command line options](#command-line-options)
+* [Command-line options](#command-line-options)
 * [Contribution](#contribution)
 * [Frequently Asked Questions](#frequently-asked-questions)
 * [License](#license)
 
 ## Docker Image for Cameradar
 
+<p align="center"><img src="images/CameradarV4.png" width="70%"/></p>
+
 Install [docker](https://docs.docker.com/engine/installation/) on your machine, and run the following command:
 
 ```bash
@@ -64,7 +66,7 @@ docker run -t ullaakut/cameradar -t <target> <other command-line options>
 
 [See command-line options](#command-line-options).
 
-e.g.: `docker run -t ullaakut/cameradar -t 192.168.100.0/24 -l` will scan the ports 554 and 8554 of hosts on the 192.168.100.0/24 subnetwork and attack the discovered RTSP streams and will output debug logs.
+e.g.: `docker run -t ullaakut/cameradar -t 192.168.100.0/24` will scan the ports 554, 5554 and 8554 of hosts on the 192.168.100.0/24 subnetwork and attack the discovered RTSP streams and will output debug logs.
 
 * `YOUR_TARGET` can be a subnet (e.g.: `172.16.100.0/24`), an IP (e.g.: `172.16.100.10`), or a range of IPs (e.g.: `172.16.100.10-20`).
 * If you want to get the precise results of the nmap scan in the form of an XML file, you can add `-v /your/path:/tmp/cameradar_scan.xml` to the docker run command, before `ullaakut/cameradar`.
@@ -74,78 +76,27 @@ e.g.: `docker run -t ullaakut/cameradar -t 192.168.100.0/24 -l` will scan the po
 
 Only use this solution if for some reason using docker is not an option for you or if you want to locally build Cameradar on your machine.
 
+**WARNING**: Manually building the binary will **NOT WORK** for any camera that uses **DIGEST AUTHENTICATION** [if your version of `curl` is over `7.64.0`](https://github.com/Ullaakut/cameradar/pull/252), which is most likely the case. For more information, see [this response on the subject from the author of curl](https://stackoverflow.com/a/59778142/4145098).
+
 ### Dependencies
 
-* `go`
-* `dep`
-
-#### Installing dep
-
-* OSX: `brew install dep` and `brew upgrade dep`
-* Others: Download the release package for your OS [here](https://github.com/golang/dep/releases)
+* `go` (> `1.10`)
+* `libcurl` development library (**[version has to be <7.66.0](https://github.com/Ullaakut/cameradar/issues/247)**)
+    * For apt users: `apt install libcurl4-openssl-dev`
 
 ### Steps to install
 
-Make sure you installed the dependencies mentionned above.
-
-1. `go get github.com/Ullaakut/cameradar`
-2. `cd $GOPATH/src/github.com/Ullaakut/cameradar`
-3. `dep ensure`
-4. `cd cameradar`
-5. `go install`
+1. `go install github.com/Ullaakut/cameradar/v5/cmd/cameradar@latest`
 
 The `cameradar` binary is now in your `$GOPATH/bin` ready to be used. See command line options [here](#command-line-options).
 
-## Library
-
-### Dependencies of the library
-
-* `curl-dev` / `libcurl` (depending on your OS)
-* `nmap`
-* `github.com/pkg/errors`
-* `gopkg.in/go-playground/validator.v9`
-* `github.com/andelf/go-curl`
-
-#### Installing the library
-
-`go get github.com/Ullaakut/cameradar`
-
-After this command, the _cameradar_ library is ready to use. Its source will be in:
-
-    $GOPATH/src/pkg/github.com/Ullaakut/cameradar
-
-You can use `go get -u` to update the package.
-
-Here is an overview of the exposed functions of this library:
-
-#### Discovery
-
-You can use the cameradar library for simple discovery purposes if you don't need to access the cameras but just to be aware of their existence.
-
-<p align="center"><img  width="90%" src="https://raw.githubusercontent.com/Ullaakut/cameradar/master/images/NmapPresets.png"/></p>
-This describes the nmap time presets. You can pass a value between 1 and 5 as described in this table, to the NmapRun function.
-
-#### Attack
-
-If you already know which hosts and ports you want to attack, you can also skip the discovery part and use directly the attack functions. The attack functions also take a timeout value as a parameter.
-
-#### Data models
-
-Here are the different data models useful to use the exposed functions of the cameradar library.
-
-<p align="center"><img width="60%" src="https://raw.githubusercontent.com/Ullaakut/cameradar/master/images/Models.png"/></p>
-
-#### Dictionary loaders
-
-The cameradar library also provides two functions that take file paths as inputs and return the appropriate data models filled.
-
 ## Configuration
 
-The **RTSP port used for most cameras is 554**, so you should probably specify 554 as one of the ports you scan. Not specifying any ports to the cameradar application will scan the 554 and 8554 ports.
+The **RTSP port used for most cameras is 554**, so you should probably specify 554 as one of the ports you scan. Not specifying any ports to the cameradar application will scan the 554, 5554 and 8554 ports.
 
-`docker run -t --net=host ullaakut/cameradar -p "18554,19000-19010" -t localhost` will scan the ports 18554, and the range of ports between 19000 and 19010 on localhost.
+`docker run -t --net=host ullaakut/cameradar -p "18554,19000-19010" -t localhost` will scan the ports `18554`, and the range of ports between `19000` and `19010` on `localhost`.
 
-You **can use your own files for the ids and routes dictionaries** used to attack the cameras, but the Cameradar repository already gives you a good base that works with most cameras, in the `/dictionaries` folder.
+You **can use your own files for the credentials and routes dictionaries** used to attack the cameras, but the Cameradar repository already gives you a good base that works with most cameras, in the `/dictionaries` folder.
 
 ```bash
 docker run -t -v /my/folder/with/dictionaries:/tmp/dictionaries \
@@ -159,27 +110,27 @@ This will put the contents of your folder containing dictionaries in the docker
 
 ## Check camera access
 
-If you have [VLC Media Player](http://www.videolan.org/vlc/), you should be able to use the GUI or the command-line to connect to the RTSP stream using this format : `rtsp://username:password@address:port/route`
+If you have [VLC Media Player](http://www.videolan.org/vlc/), you should be able to use the GUI or the command-line to connect to the RTSP stream using this format: `rtsp://username:password@address:port/route`
 
-With the above result, the RTSP URL would be `rtsp://admin:12345@173.16.100.45:554/live.sdp`
+## Command-line options
 
-## Command line options
-
-* **"-t, --target"**: Set target. Required. Target can be a file (see [instructions on how to format the file](#format-input-file)), an IP, an IP range, a subnetwork, or a combination of those.
-* **"-p, --ports"**: (Default: `554,8554`) Set custom ports.
-* **"-s, --speed"**: (Default: `4`) Set custom nmap discovery presets to improve speed or accuracy. It's recommended to lower it if you are attempting to scan an unstable and slow network, or to increase it if on a very performant and reliable network. See [this for more info on the nmap timing templates](https://nmap.org/book/man-performance.html).
-* **"-T, --timeout"**: (Default: `2000`) Set custom timeout value in miliseconds after which an attack attempt without an answer should give up. It's recommended to increase it when attempting to scan unstable and slow networks or to decrease it on very performant and reliable networks.
+* **"-t, --targets"**: Set target. Required. Target can be a file (see [instructions on how to format the file](#format-input-file)), an IP, an IP range, a subnetwork, or a combination of those. Example: `--targets="192.168.1.72,192.168.1.74"`
+* **"-p, --ports"**: (Default: `554,5554,8554`) Set custom ports.
+* **"-s, --scan-speed"**: (Default: `4`) Set custom nmap discovery presets to improve speed or accuracy. It's recommended to lower it if you are attempting to scan an unstable and slow network, or to increase it if on a very performant and reliable network. You might also want to keep it low to keep your discovery stealthy. See [this for more info on the nmap timing templates](https://nmap.org/book/man-performance.html).
+* **"-I, --attack-interval"**: (Default: `0ms`) Set custom interval after which an attack attempt without an answer should give up. It's recommended to increase it when attempting to scan unstable and slow networks or to decrease it on fast and reliable networks.
+* **"-T, --timeout"**: (Default: `2000ms`) Set custom timeout value after which an attack attempt without an answer should give up. It's recommended to increase it when attempting to scan unstable and slow networks or to decrease it on fast and reliable networks.
 * **"-r, --custom-routes"**: (Default: `<CAMERADAR_GOPATH>/dictionaries/routes`) Set custom dictionary path for routes
 * **"-c, --custom-credentials"**: (Default: `<CAMERADAR_GOPATH>/dictionaries/credentials.json`) Set custom dictionary path for credentials
 * **"-o, --nmap-output"**: (Default: `/tmp/cameradar_scan.xml`) Set custom nmap output path
-* **"-l, --log"**: Enable debug logs (nmap requests, curl describe requests, etc.)
-* **"-h"** : Display the usage information
+* **"-d, --debug"**: Enable debug logs
+* **"-v, --verbose"**: Enable verbose curl logs (not recommended for most use)
+* **"-h"**: Display the usage information
 
 ## Format input file
 
 The file can contain IPs, hostnames, IP ranges and subnetwork, separated by newlines. Example:
 
-```
+```text
 0.0.0.0
 localhost
 192.17.0.0/16
@@ -205,7 +156,7 @@ Examples:
 
 This variable is optional and allows you to specify the ports on which to run the scans.
 
-Default value: `554,8554`
+Default value: `554,5554,8554`
 
 It is recommended not to change these except if you are certain that cameras have been configured to stream RTSP over a different port. 99.9% of cameras are streaming on these ports.
 
@@ -223,19 +174,25 @@ These variables are optional, allowing to replace the default dictionaries with
 
 Default values: `<CAMERADAR_GOPATH>/dictionaries/routes` and `<CAMERADAR_GOPATH>/dictionaries/credentials.json`
 
-### `CAMERADAR_SPEED`
+### `CAMERADAR_SCAN_SPEED`
 
-This optional variable allows you to set custom nmap discovery presets to improve speed or accuracy. It's recommended to lower it if you are attempting to scan an unstable and slow network, or to increase it if on a very performant and reliable network. See [this for more info on the nmap timing templates](https://nmap.org/book/man-performance.html).
+This optional variable allows you to set custom nmap discovery presets to improve speed or accuracy. It's recommended to lower it if you are attempting to scan an unstable and slow network, or to increase it if on a fast and reliable network. See [this for more info on the nmap timing templates](https://nmap.org/book/man-performance.html).
 
 Default value: `4`
 
+### `CAMERADAR_ATTACK_INTERVAL`
+
+This optional variable allows you to set `custom interval` to wait between each attack in order to stay stealthy. It's recommended to increase it when attempting to scan a network that might be protected against bruteforce attacks. By default, there is no interval, in order to make attacks as fast as possible
+
+Default value: `0ms`
+
 ### `CAMERADAR_TIMEOUT`
 
-This optional variable allows you to set custom timeout value in miliseconds after which an attack attempt without an answer should give up. It's recommended to increase it when attempting to scan unstable and slow networks or to decrease it on very performant and reliable networks.
+This optional variable allows you to set custom timeout value after which an attack attempt without an answer should give up. It's recommended to increase it when attempting to scan unstable and slow networks or to decrease it on fast and reliable networks.
 
-Default value: `2000`
+Default value: `2000ms`
 
-### `CAMERADAR_LOGS`
+### `CAMERADAR_LOGGING`
 
 This optional variable allows you to enable a more verbose output to have more information about what is going on.
 
@@ -249,54 +206,52 @@ Default: `false`
 
 #### Docker build
 
-To build the docker image, simply run `docker build -t . cameradar` in the root of the project.
+To build the docker image, simply run `docker build . -t cameradar` in the root of the project.
 
 Your image will be called `cameradar` and NOT `ullaakut/cameradar`.
 
 #### Go build
 
-To build the project without docker:
+1. `go get github.com/Ullaakut/cameradar`
+2. `cd $GOPATH/src/github.com/Ullaakut/cameradar`
+3. `cd cmd/cameradar`
+4. `go install`
 
-1. Install dep
-   * OSX: `brew install dep` and `brew upgrade dep`
-   * Others: Download the release package for your OS [here](https://github.com/golang/dep/releases)
-2. `dep ensure`
-3. `go build` to build the library
-4. `cd cameradar && go build` to build the binary
-
-The cameradar binary is now in the root of the directory.
-
-See [the contribution document](/CONTRIBUTING.md) to get started.
+The cameradar binary is now in `$GOPATH/bin/cameradar`.
 
 ## Frequently Asked Questions
 
 > Cameradar does not detect any camera!
 
-That means that either your cameras are not streaming in RTSP or that they are not on the target you are scanning. In most cases, CCTV cameras will be on a private subnetwork, isolated from the internet. Use the `-t` option to specify your target.
+That means that either your cameras are not streaming in RTSP or that they are not on the target you are scanning. In most cases, CCTV cameras will be on a private subnetwork, isolated from the internet. Use the `-t` option to specify your target. If you are sure you did everything right but it still does not work, please open an issue with details on the device you are trying to access 🙏
 
 > Cameradar detects my cameras, but does not manage to access them at all!
 
-Maybe your cameras have been configured and the credentials / URL have been changed. Cameradar only guesses using default constructor values if a custom dictionary is not provided. You can use your own dictionaries in which you just have to add your credentials and RTSP routes. To do that, see how the [configuration](#configuration) works. Also, maybe your camera's credentials are not yet known, in which case if you find them it would be very nice to add them to the Cameradar dictionaries to help other people in the future.
+Maybe your cameras have been configured, and the credentials / URL have been changed. Cameradar only guesses using default constructor values if a custom dictionary is not provided. You can use your own dictionaries in which you just have to add your credentials and RTSP routes. To do that, see how the [configuration](#configuration) works. Also, maybe your camera's credentials are not yet known, in which case if you find them it would be very nice to add them to the Cameradar dictionaries to help other people in the future.
 
 > What happened to the C++ version?
 
-You can still find it under the 1.1.4 tag on this repo, however it was less performant and stable than the current version written in Golang.
+You can still find it under the 1.1.4 tag on this repo, however it was slower and less stable than the current version written in Golang. It is not recommended using it.
 
 > How to use the Cameradar library for my own project?
 
-See the example in `/cameradar`. You just need to run `go get github.com/Ullaakut/cameradar` and to use the `cmrdr` package in your code. You can find the documentation on [godoc](https://godoc.org/github.com/Ullaakut/cameradar).
+See the example in `/cmd/cameradar`. You just need to run `go get github.com/Ullaakut/cameradar` and to use the `cameradar` package in your code. You can find the documentation on [godoc](https://godoc.org/github.com/ullaakut/cameradar).
 
-> I want to scan my own localhost for some reason and it does not work! What's going on?
+> I want to scan my own localhost for some reason, and it does not work! What's going on?
 
-Use the `--net=host` flag when launching the cameradar image, or use the binary by running `go run cameradar/cameradar.go` or [installing it](#installing-the-binary)
+Use the `--net=host` flag when launching the cameradar image, or use the binary by running `go run cameradar/cameradar.go` or [installing it](#go-build).
 
-> I don't see a colored output :(
+> I don't see a colored output:(
 
 You forgot the `-t` flag before `ullaakut/cameradar` in your command-line. This tells docker to allocate a pseudo-tty for cameradar, which makes it able to use colors.
 
-> I don't have a camera but I'd like to try Cameradar!
+> I don't have a camera, but I'd like to try Cameradar!
 
-Simply run `docker run -p 8554:8554 -e RTSP_USERNAME=admin -e RTSP_PASSWORD=12345 -e RTSP_PORT=8554 ullaakut/rtspatt` and then run cameradar and it should guess that the username is admin and the password is 12345. You can try this with any default constructor credentials (they can be found [here](dictionaries/credentials.json))
+Simply run `docker run -p 8554:8554 -e RTSP_USERNAME=admin -e RTSP_PASSWORD=12345 -e RTSP_PORT=8554 ullaakut/rtspatt` and then run cameradar, and it should guess that the username is admin and that the password is 12345. You can try this with any default constructor credentials (they can be found [here](dictionaries/credentials.json)).
+
+> What authentication types does Cameradar support?
+
+Cameradar supports both basic and digest authentication.
 
 ## Examples
 
@@ -306,11 +261,15 @@ Simply run `docker run -p 8554:8554 -e RTSP_USERNAME=admin -e RTSP_PASSWORD=1234
 
 > Running cameradar with an input file, logs enabled on port 8554
 
-`docker run -v /tmp:/tmp --net=host -t ullaakut/cameradar -t /tmp/test.txt -p 8554 -l`
+`docker run -v /tmp:/tmp --net=host -t ullaakut/cameradar -t /tmp/test.txt -p 8554`
+
+> Running cameradar on a subnetwork with custom dictionaries, on ports 554, 5554 and 8554
+
+`docker run -v /tmp:/tmp --net=host -t ullaakut/cameradar -t 192.168.0.0/24 --custom-credentials="/tmp/dictionaries/credentials.json" --custom-routes="/tmp/dictionaries/routes" -p 554,5554,8554`
 
 ## License
 
-Copyright 2017 Ullaakut
+Copyright 2023 Ullaakut
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

README_RU.md

@@ -0,0 +1,289 @@
+# Cameradar
+
+<p align="center">
+    <img src="images/Cameradar.gif" width="100%"/>
+</p>
+
+<p align="center">
+    <a href="#license">
+        <img src="https://img.shields.io/badge/license-Apache-blue.svg?style=flat" />
+    </a>
+    <a href="https://hub.docker.com/r/ullaakut/cameradar/">
+        <img src="https://img.shields.io/docker/pulls/ullaakut/cameradar.svg?style=flat" />
+    </a>
+    <a href="https://travis-ci.org/Ullaakut/cameradar">
+        <img src="https://travis-ci.org/Ullaakut/cameradar.svg?branch=master" />
+    </a>
+    <a href='https://coveralls.io/github/Ullaakut/cameradar?branch=master'>
+        <img src='https://coveralls.io/repos/github/Ullaakut/cameradar/badge.svg?branch=master' alt='Coverage Status' />
+    </a>
+    <a href="https://golangci.com/r/github.com/ullaakut/cameradar">
+        <img src="https://golangci.com/badges/github.com/ullaakut/cameradar.svg" />
+    </a>
+    <a href="https://goreportcard.com/report/github.com/ullaakut/cameradar">
+        <img src="https://goreportcard.com/badge/github.com/ullaakut/cameradar" />
+    </a>
+    <a href="https://github.com/ullaakut/cameradar/releases/latest">
+        <img src="https://img.shields.io/github/release/Ullaakut/cameradar.svg?style=flat" />
+    </a>
+    <a href="https://godoc.org/github.com/ullaakut/cameradar">
+        <img src="https://godoc.org/github.com/ullaakut/cameradar?status.svg" />
+    </a>
+</p>
+
+## RTSP stream потоковы протокол со своей библиотекой
+
+### Возможности Cameradar
+
+* **Обнаружить открытые RTSP-хосты** на любом доступном целевом узле.
+* Определить, какая модель устройства осуществляет потоковое вещание
+* Запускать автоматический перебор по словарю для получения **маршрута потока** (например: `/live.sdp`)
+* Запустить автоматические перебор по словарю для получения **имени пользователя и пароля** камер.
+* Получить полный и удобный отчет о результатах.
+
+<p align="center"><img src="images/Cameradar.png" width="250"/></p>
+
+## Оглавление 
+
+* [Docker Image](#docker-image)
+* [Зависмости](#configuration)
+* [Вывод](#output)
+* [Параметры командной строки](#command-line-options)
+* [Вклад](#contribution)
+* [Часто задаваемые вопросы](#frequently-asked-questions)
+* [Лицензия](#license)
+
+## Docker для Cameradar
+
+<p align="center"><img src="images/CameradarV4.png" width="70%"/></p>
+* У
+Устоновка [docker](https://docs.docker.com/engine/installation/) на свою машину и запустить команду:
+
+```bash
+docker run -t ullaakut/cameradar -t <target> <other command-line options>
+```
+
+[Параметры командной строки](#command-line-options).
+
+Пример: `docker run -t ullaakut/cameradar -t 192.168.100.0/24` будет сканировать порты 554, 5554 и 8554 хостов в подсети 192.168.100.0/24 и перебирать обнаруженные RTSP-stream и выводить журнал отладки.
+*YOUR_TARGET может быть подсетью (например: 172.16.100.0/24), IP (например: 172.16.100.10) или диапазоном IPs (например: 172.16.100.10-20).
+* Если вы хотите получить точные результаты сканирования nmap в виде XML файла, вы можете добавить `-v /your/path:/tmp/cameradar_scan.xml` в команду docker run, перед `ullaakut/cameradar`.
+* Если вы используете `-r` и `-c` для указания ваших пользовательских словарей, убедитесь, что вы также используете  для добавления их в контейнер docker. Пример: `docker run -t -v /path/to/dictionaries/:/tmp/ ullaakut/cameradar -r /tmp/myroutes -c /tmp/mycredentials.json -t mytarget`.
+
+## Бинарная устоновка
+Решение локального Camader без использование docker.
+
+
+
+**WARNING**: Бинарная устновка **НЕ БУДЕТ РАБОТАТЬ** для камер, которые используют **DIGEST AUTHENTICATION** [если ваша версия `curl` старше `7.64.0`](https://github.com/Ullaakut/cameradar/pull/252), то скорее всего, так и есть. Дополнильная информация [this response on the subject from the author of curl](https://stackoverflow.com/a/59778142/4145098).
+
+### Зависимости
+
+* `go` (> `1.10`)
+* `libcurl` библиотека (**[version has to be <7.66.0](https://github.com/Ullaakut/cameradar/issues/247)**)
+* Для apt: `apt install libcurl4-openssl-dev`
+
+### Этапы устоновки
+
+1. `go install github.com/Ullaakut/cameradar/v5/cmd/cameradar@latest`
+
+Бинарный файл `cameradar` находится здесь `$GOPATH/bin` и готов к использованию. Опции командной строки  [здесь](#command-line-options).
+
+## Конфигурация 
+
+Порт **RTSP, используемый для большинства камер, 554**, поэтому указываем  554 в качестве одного из сканируемых портов. Если не прописать порты в приложении cameradar, оно будет искать порты 554, 5554 и 8554.
+
+`docker run -t --net=host ullaakut/cameradar -p "18554,19000-19010" -t localhost`  будет сканировать порты `18554`, и диапазон портов между `19000` и `19010` на `localhost`.
+
+Вы **можете использовать свои собственные файлы для словарей учетных данных и маршрутов**, используемых для атаки на камеры, но репозиторий Cameradar уже предоставляет вам хорошую базу, которая работает с большинством камер, в папке `/dictionaries`.
+
+```bash
+docker run -t -v /my/folder/with/dictionaries:/tmp/dictionaries \
+ullaakut/cameradar \
+-r "/tmp/dictionaries/my_routes" \
+-c "/tmp/dictionaries/my_credentials.json" \
+-t 172.19.124.0/24
+```
+
+Это поместит содержимое вашей папки со словарями в образ докера и будет использовать его для перебора словаря, вместо словарей по умолчанию, предоставленных в репозитории cameradar.
+
+## Доступ камеры 
+
+Если у вас есть [VLC Media Playe](http://www.videolan.org/vlc/), у вас есть  возможность использовать графический интерфейс или командную строку для подключения к потоку RTSP, для этого используется этот формат `rtsp://username:password@address:port/route`.
+
+## Опции командной строки 
+
+* ** "-t, --targets "**: Устанавливаем цель.Целью может быть файл (см. [инструкции по форматированию файла](#format-input-file)), IP, диапазон IP, подсеть или их комбинация. Пример: `--targets="192.168.1.72,192.168.1.74"`
+* ** "-p, --ports "**: (По умолчанию: `554,5554,8554`) Устанавливаем пользовательские порты.
+* ** "-s, --scan-speed "**: (По умолчанию: `4`) Установка пользовательских настроек обнаружения nmap для повышения скорости или точности. Рекомендуется уменьшить это значение, если вы пытаетесь сканировать нестабильную и медленную сеть, или увеличить его, если вы работаете в очень производительной и надежной сети. Вы также можете оставить значение  низким, чтобы  уменшить вероятность обнуружения. Смотрите [здесь более подробная информация о шаблонах синхронизации nmap] (https://nmap.org/book/man-performance.html).
+* ** "-I, --attack-interval "**: (По умолчанию: `0ms`) Задает пользовательский интервал, после которого попытка атаки без ответа должна прекратиться. Рекомендуется увеличить его при попытке сканирования нестабильных и медленных сетей или уменьшить в быстрых и надежных сетях.
+* ** "-T, --timeout "**: (По умолчанию: `2000 мс`) Задает пользовательское значение тайм-аута, после которого попытка атаки без ответа должна прекратиться. Рекомендуется увеличить это значение при попытке сканирования нестабильных и медленных сетей или уменьшить его в быстрых и надежных сетях.
+* ** "-r, --custom-routes "**: (По умолчанию: `<CAMERADAR_GOPATH>/dictionaries/routes`) Устанавливает путь к пользовательскому словарю для маршрутов.
+* ** "-c, --custom-credentials "**: (По умолчанию: `<CAMERADAR_GOPATH>/dictionaries/credentials.json`) Устанавливает путь к пользовательскому словарю для учетных данных
+* ** "-o, --nmap-output "**: (По умолчанию: `/tmp/cameradar_scan.xml`) устанавливаем путь вывода nmap.
+* **"-d, --debug "**: Включаем журналы отладки
+* **"-v, --verbose "**: Включаем  журналы curl (не рекомендуется для большинства пользователей)
+* **"-h "**: Отображаем использованную информацию
+
+## Форматирование входного файла 
+
+Файл может содержать IP-адреса, имена хостов, диапазоны IP-адресов и подсети, разделенные на строки. Например:
+
+```text
+0.0.0.0
+localhost
+192.17.0.0/16
+192.168.1.140-255
+192.168.2-3.0-255
+```
+
+## Переменные среды
+
+### `CAMERADAR_TARGET`
+
+Эта переменная  обязательная и указывает цель, которую cameradar должен сканировать и пытаться получить доступ к потокам RTSP.
+
+Например:
+
+* `172.16.100.0/24`
+* `192.168.1.1`
+* `localhost`
+* `192.168.1.140-255`
+* `192.168.2-3.0-255`
+
+### `CAMERADAR_PORTS`
+
+Эта переменная не обязательная,нужна для того, чтоб указать сканируемые порты 
+
+Значение по умолчанию  `554,5554,8554`
+
+Рекомендуется не изменять их, кроме случаев, когда вы уверены, что камеры были настроены на передачу RTSP через другой порт. 99,9% камер передают поток через эти порты.
+
+### `CAMERADAR_NMAP_OUTPUT_FILE`
+
+Эта переменная является необязательной и позволяет указать, в какой файл nmap будет записывать свой вывод.
+
+Значение по умолчанию: `/tmp/cameradar_scan.xml`
+
+Это может быть полезно, только для самотятельного чтения файлов, если вы не хотите, чтобы он записывал данные в вашу папку `/tmp`, или если вы хотите использовать только функцию RunNmap в cameradar, и делать ее разбор вручную.
+
+### `CAMERADAR_CUSTOM_ROUTES`, `CAMERADAR_CUSTOM_CREDENTIALS`
+
+Эти переменные являются необязательными и позволяют заменить словари по умолчанию на пользовательские, Это нужно для перебора по словарю.
+
+Значение по умолчанию: `<CAMERADAR_GOPATH>/dictionaries/routes` and `<CAMERADAR_GOPATH>/dictionaries/credentials.json`
+
+### `CAMERADAR_SCAN_SPEED`
+
+Эта опцианальная  переменная позволяет установить пользовательские настройки  обнаружения nmap для повышения скорости и точности. Рекомендуется уменьшить значение, если вы пытаетесь сканировать нестабильную и медленную сеть, или увеличить, если сеть быстрая и надежная. Дополнительные сведения о временных шаблонах nmap смотреть [здесь](https://nmap.org/book/man-performance.html).
+
+Значение по умолчанию: `4`
+
+### `CAMERADAR_ATTACK_INTERVAL`
+
+Эта не обязательная переменная позволяет установить `custom interval` между каждой атакой, чтобы оставаться незаметным. Рекомендуется увеличивать его при попытке сканирования сети, которая может быть защищена от атак методом перебора. По умолчанию интервал отсутствует, чтобы сделать атаки как можно более быстрыми.
+
+Значение по умолчанию: `0ms`
+
+### `CAMERADAR_TIMEOUT`
+
+Эта необязательная переменная дает возмоджность установить пользовательское значение тайм-аута, по истечении которого попытка атаки без ответа должна прекратиться. Рекомендуется увеличить это значение при попытке сканирования нестабильных и медленных сетей или уменьшить его в быстрых и надежных сетях.
+
+Значение по умолчанию: `2000ms`
+
+### `CAMERADAR_LOGGING`
+
+Эта необязательная переменная позволяет вам включить более расширенный вывод, чтобы иметь больше информации о процессах.
+
+Она будет выводить результаты nmap, запросы cURL и т.д.
+
+Значение по умолчанию: `false`
+
+## Вклад
+
+### Сборка 
+
+#### Docker build
+
+Чтобы собрать образ докера, просто выполните команду `docker build . -t cameradar` в корне проекта.
+
+Ваше изображение будет называться `cameradar`, а НЕ `ullaakut/cameradar`.
+
+#### Приступим к сборке 
+
+1. `go get github.com/Ullaakut/cameradar`
+2. `cd $GOPATH/src/github.com/Ullaakut/cameradar`
+3. `cd cmd/cameradar`
+4. `go install`
+
+Бинарный файл cameradar теперь находится в `$GOPATH/bin/cameradar`.
+
+## Часто задаваемые вопросы
+
+> Cameradar не находит не одной камеры!
+
+Это означает, что либо ваши камеры не передают поток в RTSP, либо их нет на объекте, который вы сканируете. В большинстве случаев камеры видеонаблюдения находятся в частной подсети, изолированной от Интернета. Используйте опцию `-t` для указания цели. Если вы уверены, что все сделали правильно, но это все равно не работает, пожалуйста, откройте проблему с подробной информацией об устройстве, к которому вы пытаетесь получить доступ.
+
+> Cameradar нашел мои камеры, но не может получить доступ к ним 
+
+Возможно, ваши камеры были настроены, и учетные данные / URL были изменены. Cameradar только угадывает, используя значения конструктора по умолчанию, если не предоставлен пользовательский словарь. Вы можете использовать свои собственные словари, в которые нужно просто добавить ваши учетные данные и маршруты RTSP. Для этого посмотрите, как работает [configuration](#configuration). Также, возможно, учетные данные вашей камеры еще не известны, в таком случае, если вы их найдете, было бы очень хорошо добавить их в словари Cameradar, чтобы помочь другим людям в будущем.
+
+> Что случилось с версией на  C++?
+
+Вы все еще можете найти его под тегом 1.1.4 в этом репозитории, однако он был медленнее и менее стабилен, чем текущая версия, написанная на Golang. Использовать ее не рекомендуется.
+
+> Как использовать библиотеку Cameradar для моего собственного проекта?
+
+Смотрите пример в `/cmd/cameradar`. Вам просто нужно запустить `go get github.com/Ullaakut/cameradar` и использовать пакет `cameradar` в своем коде. Документацию можно найти на [godoc](https://godoc.org/github.com/ullaakut/cameradar).
+
+> Я почему-то хочу просканировать свой собственный localhost, а он не работает! 
+
+Используйте флаг `--net=host` при запуске образа cameradar, или используйте бинарный файл, выполнив команду `go run cameradar/cameradar.go` или [установив его](#go-build).
+
+> Я не вижу цветного вывода :(
+
+Вероятнее вы  забыли использовать флаг `-t` перед `ullaakut/cameradar` в вашей командной строке. Это указывается  -tty для cameradar, что позволит ему использовать цвета.
+
+> У меня нет камеры, но я хотел бы попробовать Cameradar!
+
+Просто воспользуйтесь командой `docker run -p 8554:8554 -e RTSP_USERNAME=admin -e RTSP_PASSWORD=12345 -e RTSP_PORT=8554 ullaakut/rtspatt` и запустите cameradar, и он должен определить, что имя пользователя - admin, а пароль - 12345. Вы можете попробовать это с любыми учетными данными конструктора по умолчанию (их можно найти [здесь](dictionaries/credentials.json)).
+
+> Какие типы аутентификации поддерживает Cameradar?
+
+Cameradar поддерживает как базовую, так и дайджест-аутентификацию.
+
+
+## Примеры 
+
+>> Запуск cameradar на вашей собственной машине для сканирования портов по умолчанию
+
+`docker run --net=host -t ullaakut/cameradar -t localhost`
+
+> Запуск cameradar с входным файлом, включение журналов на порту 8554
+
+`docker run -v /tmp:/tmp --net=host -t ullaakut/cameradar -t /tmp/test.txt -p 8554`
+
+> Запуск cameradar в подсети с пользовательскими словарями, на портах 554, 5554 и 8554
+
+`docker run -v /tmp:/tmp --net=host -t ullaakut/cameradar -t 192.168.0.0/24 --custom-credentials="/tmp/dictionaries/credentials.json" --custom-routes="/tmp/dictionaries/routes" -p 554,5554,8554`.
+
+## Лицензия 
+
+Copyright 2023 Ullaakut
+
+Настоящим предоставляется бесплатное разрешение любому лицу, получившему копию
+данного программного обеспечения и сопутствующих файлов документации ("Программное обеспечение"), совершать сделки с  Программным обеспечением без ограничений, включая, без ограничения, права
+использовать, копировать, изменять, объединять, публиковать, распространять, выдавать сублицензии и/или продавать
+копии программного обеспечения, а также разрешать лицам, которым предоставляется Программное обеспечение
+делать это, при соблюдении следующих условий:
+
+Вышеуказанное уведомление об авторском праве и данное уведомление о разрешении должны быть включены во все
+копиях или существенных частях Программного обеспечения.
+
+ПРОГРАММНОЕ ОБЕСПЕЧЕНИЕ ПРЕДОСТАВЛЯЕТСЯ "КАК ЕСТЬ", БЕЗ КАКИХ-ЛИБО ГАРАНТИЙ, ЯВНЫХ ИЛИ
+ПОДРАЗУМЕВАЕМЫХ, ВКЛЮЧАЯ, НО НЕ ОГРАНИЧИВАЯСЬ ГАРАНТИЯМИ ТОВАРНОГО СОСТОЯНИЯ,
+ПРИГОДНОСТИ ДЛЯ КОНКРЕТНОЙ ЦЕЛИ И НЕНАРУШЕНИЯ ПРАВ. НИ ПРИ КАКИХ ОБСТОЯТЕЛЬСТВАХ
+АВТОРЫ ИЛИ ВЛАДЕЛЬЦЫ АВТОРСКИХ ПРАВ НЕ НЕСУТ ОТВЕТСТВЕННОСТИ ЗА ЛЮБЫЕ ПРЕТЕНЗИИ, УБЫТКИ ИЛИ ДРУГУЮ
+ОТВЕТСТВЕННОСТЬ, БУДЬ ТО В РАМКАХ ДОГОВОРНОГО, ДЕЛИКТНОГО ИЛИ ИНОГО ИСКА, ВОЗНИКАЮЩЕГО
+ИЗ, В РЕЗУЛЬТАТЕ ИЛИ В СВЯЗИ С ПРОГРАММНЫМ ОБЕСПЕЧЕНИЕМ ИЛИ ИСПОЛЬЗОВАНИЕМ ИЛИ ИНЫМИ
+ИСПОЛЬЗОВАНИЕМ ИЛИ ДРУГИМИ ДЕЙСТВИЯМИ С ПРОГРАММНЫМ ОБЕСПЕЧЕНИЕМ.

attack.go

@@ -1,15 +1,13 @@
-package cmrdr
+package cameradar
 
 import (
 	"fmt"
 	"time"
 
-	curl "github.com/andelf/go-curl"
-	"github.com/pkg/errors"
-	v "gopkg.in/go-playground/validator.v9"
+	"github.com/Ullaakut/go-curl"
 )
 
-// HTTP responses
+// HTTP responses.
 const (
 	httpOK           = 200
 	httpUnauthorized = 401
@@ -17,18 +15,220 @@ const (
 	httpNotFound     = 404
 )
 
-// CURL RTSP request types
+// CURL RTSP request types.
 const (
 	rtspDescribe = 2
 	rtspSetup    = 4
 )
 
-// HACK: See https://stackoverflow.com/questions/3572397/lib-curl-in-c-disable-printing
-func doNotWrite([]uint8, interface{}) bool {
-	return true
+// Authentication types.
+const (
+	authNone   = 0
+	authBasic  = 1
+	authDigest = 2
+)
+
+// Route that should never be a constructor default.
+const dummyRoute = "/0x8b6c42"
+
+// Attack attacks the given targets and returns the accessed streams.
+func (s *Scanner) Attack(targets []Stream) ([]Stream, error) {
+	if len(targets) == 0 {
+		return nil, fmt.Errorf("no stream found")
+	}
+
+	// Most cameras will be accessed successfully with these two attacks.
+	s.term.StartStepf("Attacking routes of %d streams", len(targets))
+	streams := s.AttackRoute(targets)
+
+	s.term.StartStepf("Attempting to detect authentication methods of %d streams", len(targets))
+	streams = s.DetectAuthMethods(streams)
+
+	s.term.StartStepf("Attacking credentials of %d streams", len(targets))
+	streams = s.AttackCredentials(streams)
+
+	s.term.StartStep("Validating that streams are accessible")
+	streams = s.ValidateStreams(streams)
+
+	// But some cameras run GST RTSP Server which prioritizes 401 over 404 contrary to most cameras.
+	// For these cameras, running another route attack will solve the problem.
+	for _, stream := range streams {
+		if !stream.RouteFound || !stream.CredentialsFound || !stream.Available {
+			s.term.StartStepf("Second round of attacks")
+			streams = s.AttackRoute(streams)
+
+			s.term.StartStep("Validating that streams are accessible")
+			streams = s.ValidateStreams(streams)
+
+			break
+		}
+	}
+
+	s.term.EndStep()
+
+	return streams, nil
 }
 
-func routeAttack(c Curler, stream Stream, route string, timeout time.Duration, enableLogs bool) bool {
+// ValidateStreams tries to setup the stream to validate whether or not it is available.
+func (s *Scanner) ValidateStreams(targets []Stream) []Stream {
+	for i := range targets {
+		targets[i].Available = s.validateStream(targets[i])
+		time.Sleep(s.attackInterval)
+	}
+
+	return targets
+}
+
+// AttackCredentials attempts to guess the provided targets' credentials using the given
+// dictionary or the default dictionary if none was provided by the user.
+func (s *Scanner) AttackCredentials(targets []Stream) []Stream {
+	resChan := make(chan Stream)
+	defer close(resChan)
+
+	for i := range targets {
+		go s.attackCameraCredentials(targets[i], resChan)
+	}
+
+	for range targets {
+		attackResult := <-resChan
+		if attackResult.CredentialsFound {
+			targets = replace(targets, attackResult)
+		}
+	}
+
+	return targets
+}
+
+// AttackRoute attempts to guess the provided targets' streaming routes using the given
+// dictionary or the default dictionary if none was provided by the user.
+func (s *Scanner) AttackRoute(targets []Stream) []Stream {
+	resChan := make(chan Stream)
+	defer close(resChan)
+
+	for i := range targets {
+		go s.attackCameraRoute(targets[i], resChan)
+	}
+
+	for range targets {
+		attackResult := <-resChan
+		if attackResult.RouteFound {
+			targets = replace(targets, attackResult)
+		}
+	}
+
+	return targets
+}
+
+// DetectAuthMethods attempts to guess the provided targets' authentication types, between
+// digest, basic auth or none at all.
+func (s *Scanner) DetectAuthMethods(targets []Stream) []Stream {
+	for i := range targets {
+		targets[i].AuthenticationType = s.detectAuthMethod(targets[i])
+		time.Sleep(s.attackInterval)
+
+		var authMethod string
+		switch targets[i].AuthenticationType {
+		case authNone:
+			authMethod = "no"
+		case authBasic:
+			authMethod = "basic"
+		case authDigest:
+			authMethod = "digest"
+		default:
+			authMethod = "unknown:" + string(targets[i].AuthenticationType)
+		}
+
+		s.term.Debugf("Stream %s uses %s authentication method\n", GetCameraRTSPURL(targets[i]), authMethod)
+	}
+
+	return targets
+}
+
+func (s *Scanner) attackCameraCredentials(target Stream, resChan chan<- Stream) {
+	for _, username := range s.credentials.Usernames {
+		for _, password := range s.credentials.Passwords {
+			ok := s.credAttack(target, username, password)
+			if ok {
+				target.CredentialsFound = true
+				target.Username = username
+				target.Password = password
+				resChan <- target
+				return
+			}
+			time.Sleep(s.attackInterval)
+		}
+	}
+
+	target.CredentialsFound = false
+	resChan <- target
+}
+
+func (s *Scanner) attackCameraRoute(target Stream, resChan chan<- Stream) {
+	// If the stream responds positively to the dummy route, it means
+	// it doesn't require (or respect the RFC) a route and the attack
+	// can be skipped.
+	ok := s.routeAttack(target, dummyRoute)
+	if ok {
+		target.RouteFound = true
+		target.Routes = append(target.Routes, "/")
+		resChan <- target
+		return
+	}
+
+	// Otherwise, bruteforce the routes.
+	for _, route := range s.routes {
+		ok := s.routeAttack(target, route)
+		if ok {
+			target.RouteFound = true
+			target.Routes = append(target.Routes, route)
+		}
+		time.Sleep(s.attackInterval)
+	}
+
+	resChan <- target
+}
+
+func (s *Scanner) detectAuthMethod(stream Stream) int {
+	c := s.curl.Duphandle()
+
+	attackURL := fmt.Sprintf(
+		"rtsp://%s:%d/%s",
+		stream.Address,
+		stream.Port,
+		stream.Route(),
+	)
+
+	s.setCurlOptions(c)
+
+	// Send a request to the URL of the stream we want to attack.
+	_ = c.Setopt(curl.OPT_URL, attackURL)
+	// Set the RTSP STREAM URI as the stream URL.
+	_ = c.Setopt(curl.OPT_RTSP_STREAM_URI, attackURL)
+	_ = c.Setopt(curl.OPT_RTSP_REQUEST, rtspDescribe)
+
+	// Perform the request.
+	err := c.Perform()
+	if err != nil {
+		s.term.Errorf("Perform failed for %q (auth %d): %v", attackURL, stream.AuthenticationType, err)
+		return -1
+	}
+
+	authType, err := c.Getinfo(curl.INFO_HTTPAUTH_AVAIL)
+	if err != nil {
+		s.term.Errorf("Getinfo failed: %v", err)
+		return -1
+	}
+
+	if s.debug {
+		s.term.Debugln("DESCRIBE", attackURL, "RTSP/1.0 >", authType)
+	}
+
+	return authType.(int)
+}
+
+func (s *Scanner) routeAttack(stream Stream, route string) bool {
+	c := s.curl.Duphandle()
+
 	attackURL := fmt.Sprintf(
 		"rtsp://%s:%s@%s:%d/%s",
 		stream.Username,
@@ -38,249 +238,163 @@ func routeAttack(c Curler, stream Stream, route string, timeout time.Duration, e
 		route,
 	)
 
-	if enableLogs {
-		// Debug logs when logs are enabled
-		c.Setopt(curl.OPT_VERBOSE, 1)
-	} else {
-		// Do not write sdp in stdout
-		c.Setopt(curl.OPT_WRITEFUNCTION, doNotWrite)
-	}
+	s.setCurlOptions(c)
 
-	// Do not use signals (would break multithreading)
-	c.Setopt(curl.OPT_NOSIGNAL, 1)
-	// Do not send a body in the describe request
-	c.Setopt(curl.OPT_NOBODY, 1)
-	// Send a request to the URL of the stream we want to attack
-	c.Setopt(curl.OPT_URL, attackURL)
-	// Set the RTSP STREAM URI as the stream URL
-	c.Setopt(curl.OPT_RTSP_STREAM_URI, attackURL)
-	// 2 is CURL_RTSPREQ_DESCRIBE
-	c.Setopt(curl.OPT_RTSP_REQUEST, rtspDescribe)
-	// Set custom timeout
-	c.Setopt(curl.OPT_TIMEOUT_MS, int(timeout/time.Millisecond))
+	// Set proper authentication type.
+	_ = c.Setopt(curl.OPT_HTTPAUTH, stream.AuthenticationType)
+	_ = c.Setopt(curl.OPT_USERPWD, fmt.Sprint(stream.Username, ":", stream.Password))
 
-	// Perform the request
+	// Send a request to the URL of the stream we want to attack.
+	_ = c.Setopt(curl.OPT_URL, attackURL)
+	// Set the RTSP STREAM URI as the stream URL.
+	_ = c.Setopt(curl.OPT_RTSP_STREAM_URI, attackURL)
+	_ = c.Setopt(curl.OPT_RTSP_REQUEST, rtspDescribe)
+
+	// Perform the request.
 	err := c.Perform()
 	if err != nil {
-		fmt.Printf("\nERROR: curl timeout on stream '%s' reached after %s.\nconsider increasing the timeout (-T, --timeout parameter) to at least 5000ms if scanning an unstable network.\n", stream.Address, timeout.String())
+		s.term.Errorf("Perform failed for %q (auth %d): %v", attackURL, stream.AuthenticationType, err)
 		return false
 	}
 
-	// Get return code for the request
+	// Get return code for the request.
 	rc, err := c.Getinfo(curl.INFO_RESPONSE_CODE)
 	if err != nil {
+		s.term.Errorf("Getinfo failed: %v", err)
 		return false
 	}
 
-	// If it's a 401 or 403, it means that the credentials are wrong but the route might be okay
-	// If it's a 200, the stream is accessed successfully
+	if s.debug {
+		s.term.Debugln("DESCRIBE", attackURL, "RTSP/1.0 >", rc)
+	}
+	// If it's a 401 or 403, it means that the credentials are wrong but the route might be okay.
+	// If it's a 200, the stream is accessed successfully.
 	if rc == httpOK || rc == httpUnauthorized || rc == httpForbidden {
 		return true
 	}
 	return false
 }
 
-func credAttack(c Curler, stream Stream, username string, password string, timeout time.Duration, enableLogs bool) bool {
+func (s *Scanner) credAttack(stream Stream, username string, password string) bool {
+	c := s.curl.Duphandle()
+
 	attackURL := fmt.Sprintf(
 		"rtsp://%s:%s@%s:%d/%s",
 		username,
 		password,
 		stream.Address,
 		stream.Port,
-		stream.Route,
+		stream.Route(),
 	)
 
-	if enableLogs {
-		// Debug logs when logs are enabled
-		c.Setopt(curl.OPT_VERBOSE, 1)
-	} else {
-		// Do not write sdp in stdout
-		c.Setopt(curl.OPT_WRITEFUNCTION, doNotWrite)
-	}
+	s.setCurlOptions(c)
 
-	// Do not use signals (would break multithreading)
-	c.Setopt(curl.OPT_NOSIGNAL, 1)
-	// Do not send a body in the describe request
-	c.Setopt(curl.OPT_NOBODY, 1)
-	// Send a request to the URL of the stream we want to attack
-	c.Setopt(curl.OPT_URL, attackURL)
-	// Set the RTSP STREAM URI as the stream URL
-	c.Setopt(curl.OPT_RTSP_STREAM_URI, attackURL)
-	// 2 is CURL_RTSPREQ_DESCRIBE
-	c.Setopt(curl.OPT_RTSP_REQUEST, 2)
-	// Set custom timeout
-	c.Setopt(curl.OPT_TIMEOUT_MS, int(timeout/time.Millisecond))
+	// Set proper authentication type.
+	_ = c.Setopt(curl.OPT_HTTPAUTH, stream.AuthenticationType)
+	_ = c.Setopt(curl.OPT_USERPWD, fmt.Sprint(username, ":", password))
 
-	// Perform the request
+	// Send a request to the URL of the stream we want to attack.
+	_ = c.Setopt(curl.OPT_URL, attackURL)
+	// Set the RTSP STREAM URI as the stream URL.
+	_ = c.Setopt(curl.OPT_RTSP_STREAM_URI, attackURL)
+	_ = c.Setopt(curl.OPT_RTSP_REQUEST, rtspDescribe)
+
+	// Perform the request.
 	err := c.Perform()
 	if err != nil {
-		fmt.Printf("\nERROR: curl timeout on stream '%s' reached after %s.\nconsider increasing the timeout (-T, --timeout parameter) to at least 5000ms if scanning an unstable network.\n", stream.Address, timeout.String())
+		s.term.Errorf("Perform failed for %q (auth %d): %v", attackURL, stream.AuthenticationType, err)
 		return false
 	}
 
-	// Get return code for the request
+	// Get return code for the request.
 	rc, err := c.Getinfo(curl.INFO_RESPONSE_CODE)
 	if err != nil {
+		s.term.Errorf("Getinfo failed: %v", err)
 		return false
 	}
 
-	// If it's a 404, it means that the route is incorrect but the credentials might be okay
-	// If it's a 200, the stream is accessed successfully
+	if s.debug {
+		s.term.Debugln("DESCRIBE", attackURL, "RTSP/1.0 >", rc)
+	}
+
+	// If it's a 404, it means that the route is incorrect but the credentials might be okay.
+	// If it's a 200, the stream is accessed successfully.
 	if rc == httpOK || rc == httpNotFound {
 		return true
 	}
 	return false
 }
 
-func validateStream(c Curler, stream Stream, timeout time.Duration, enableLogs bool) bool {
+func (s *Scanner) validateStream(stream Stream) bool {
+	c := s.curl.Duphandle()
+
 	attackURL := fmt.Sprintf(
 		"rtsp://%s:%s@%s:%d/%s",
 		stream.Username,
 		stream.Password,
 		stream.Address,
 		stream.Port,
-		stream.Route,
+		stream.Route(),
 	)
 
-	if enableLogs {
-		// Debug logs when logs are enabled
-		c.Setopt(curl.OPT_VERBOSE, 1)
-	} else {
-		// Do not write sdp in stdout
-		c.Setopt(curl.OPT_WRITEFUNCTION, doNotWrite)
-	}
+	s.setCurlOptions(c)
 
-	// Do not use signals (would break multithreading)
-	c.Setopt(curl.OPT_NOSIGNAL, 1)
-	// Do not send a body in the describe request
-	c.Setopt(curl.OPT_NOBODY, 1)
-	// Send a request to the URL of the stream we want to attack
-	c.Setopt(curl.OPT_URL, attackURL)
-	// Set the RTSP STREAM URI as the stream URL
-	c.Setopt(curl.OPT_RTSP_STREAM_URI, attackURL)
-	// 2 is CURL_RTSPREQ_SETUP
-	c.Setopt(curl.OPT_RTSP_REQUEST, rtspSetup)
-	// Set custom timeout
-	c.Setopt(curl.OPT_TIMEOUT_MS, int(timeout/time.Millisecond))
+	// Set proper authentication type.
+	_ = c.Setopt(curl.OPT_HTTPAUTH, stream.AuthenticationType)
+	_ = c.Setopt(curl.OPT_USERPWD, fmt.Sprint(stream.Username, ":", stream.Password))
 
-	c.Setopt(curl.OPT_RTSP_TRANSPORT, "RTP/AVP;unicast;client_port=33332-33333")
+	// Send a request to the URL of the stream we want to attack.
+	_ = c.Setopt(curl.OPT_URL, attackURL)
+	// Set the RTSP STREAM URI as the stream URL.
+	_ = c.Setopt(curl.OPT_RTSP_STREAM_URI, attackURL)
+	_ = c.Setopt(curl.OPT_RTSP_REQUEST, rtspSetup)
 
-	// Perform the request
+	_ = c.Setopt(curl.OPT_RTSP_TRANSPORT, "RTP/AVP;unicast;client_port=33332-33333")
+
+	// Perform the request.
 	err := c.Perform()
 	if err != nil {
-		fmt.Printf("\nERROR: curl timeout on stream '%s' reached after %s.\nconsider increasing the timeout (-T, --timeout parameter) to at least 5000ms if scanning an unstable network.\n", stream.Address, timeout.String())
+		s.term.Errorf("Perform failed for %q (auth %d): %v", attackURL, stream.AuthenticationType, err)
 		return false
 	}
 
-	// Get return code for the request
+	// Get return code for the request.
 	rc, err := c.Getinfo(curl.INFO_RESPONSE_CODE)
 	if err != nil {
+		s.term.Errorf("Getinfo failed: %v", err)
 		return false
 	}
 
-	// If it's a 200, the stream is accessed successfully
+	if s.debug {
+		s.term.Debugln("SETUP", attackURL, "RTSP/1.0 >", rc)
+	}
+
+	// If it's a 200, the stream is accessed successfully.
 	if rc == httpOK {
 		return true
 	}
 	return false
 }
 
-// ValidateStreams tries to setup the stream to validate whether or not it is available
-func ValidateStreams(c Curler, targets []Stream, timeout time.Duration, log bool) ([]Stream, error) {
-	for idx, target := range targets {
-		targets[idx].Available = validateStream(c, target, timeout, log)
-	}
+func (s *Scanner) setCurlOptions(c Curler) {
+	// Do not write sdp in stdout
+	_ = c.Setopt(curl.OPT_WRITEFUNCTION, doNotWrite)
+	// Do not use signals (would break multithreading).
+	_ = c.Setopt(curl.OPT_NOSIGNAL, 1)
+	// Do not send a body in the describe request.
+	_ = c.Setopt(curl.OPT_NOBODY, 1)
+	// Set custom timeout.
+	_ = c.Setopt(curl.OPT_TIMEOUT_MS, int(s.timeout/time.Millisecond))
 
-	return targets, nil
+	// Enable verbose logs if verbose mode is on.
+	if s.verbose {
+		_ = c.Setopt(curl.OPT_VERBOSE, 1)
+	} else {
+		_ = c.Setopt(curl.OPT_VERBOSE, 0)
+	}
 }
 
-func attackCameraCredentials(c Curler, target Stream, credentials Credentials, resultsChan chan<- Stream, timeout time.Duration, log bool) {
-	for _, username := range credentials.Usernames {
-		for _, password := range credentials.Passwords {
-			ok := credAttack(c.Duphandle(), target, username, password, timeout, log)
-			if ok {
-				target.CredentialsFound = true
-				target.Username = username
-				target.Password = password
-				resultsChan <- target
-				return
-			}
-		}
-	}
-	target.CredentialsFound = false
-	resultsChan <- target
-}
-
-func attackCameraRoute(c Curler, target Stream, routes Routes, resultsChan chan<- Stream, timeout time.Duration, log bool) {
-	for _, route := range routes {
-		ok := routeAttack(c.Duphandle(), target, route, timeout, log)
-		if ok {
-			target.RouteFound = true
-			target.Route = route
-			resultsChan <- target
-			return
-		}
-	}
-	target.RouteFound = false
-	resultsChan <- target
-}
-
-// AttackCredentials attempts to guess the provided targets' credentials using the given
-// dictionary or the default dictionary if none was provided by the user.
-func AttackCredentials(c Curler, targets []Stream, credentials Credentials, timeout time.Duration, log bool) ([]Stream, error) {
-	attacks := make(chan Stream)
-	defer close(attacks)
-
-	validate := v.New()
-	for _, target := range targets {
-		err := validate.Struct(target)
-		if err != nil {
-			return targets, errors.Wrap(err, "invalid targets")
-		}
-
-		go attackCameraCredentials(c, target, credentials, attacks, timeout, log)
-	}
-
-	attackResults := []Stream{}
-	for range targets {
-		attackResults = append(attackResults, <-attacks)
-	}
-
-	for _, result := range attackResults {
-		if result.CredentialsFound {
-			targets = replace(targets, result)
-		}
-	}
-
-	return targets, nil
-}
-
-// AttackRoute attempts to guess the provided targets' streaming routes using the given
-// dictionary or the default dictionary if none was provided by the user.
-func AttackRoute(c Curler, targets []Stream, routes Routes, timeout time.Duration, log bool) ([]Stream, error) {
-	attacks := make(chan Stream)
-	defer close(attacks)
-
-	validate := v.New()
-	for _, target := range targets {
-		err := validate.Struct(target)
-		if err != nil {
-			return targets, errors.Wrap(err, "invalid targets")
-		}
-
-		go attackCameraRoute(c, target, routes, attacks, timeout, log)
-	}
-
-	attackResults := []Stream{}
-	for range targets {
-		attackResults = append(attackResults, <-attacks)
-	}
-
-	for _, result := range attackResults {
-		if result.RouteFound {
-			targets = replace(targets, result)
-		}
-	}
-
-	return targets, nil
+// HACK: See https://stackoverflow.com/questions/3572397/lib-curl-in-c-disable-printing
+func doNotWrite([]uint8, interface{}) bool {
+	return true
 }

attack_test.go

@@ -1,13 +1,13 @@
-package cmrdr
+package cameradar
 
 import (
 	"errors"
-	"fmt"
-	"os"
+	"io/ioutil"
 	"testing"
 	"time"
 
-	curl "github.com/andelf/go-curl"
+	"github.com/Ullaakut/disgo"
+	"github.com/Ullaakut/go-curl"
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/mock"
 )
@@ -35,35 +35,127 @@ func (m *CurlerMock) Duphandle() Curler {
 	return m
 }
 
+func TestAttack(t *testing.T) {
+	var (
+		stream1 = Stream{
+			Device:  "fakeDevice",
+			Address: "fakeAddress",
+			Port:    1337,
+		}
+
+		stream2 = Stream{
+			Device:  "fakeDevice",
+			Address: "differentFakeAddress",
+			Port:    1337,
+		}
+
+		fakeTargets     = []Stream{stream1, stream2}
+		fakeRoutes      = Routes{"live.sdp", "media.amp"}
+		fakeCredentials = Credentials{
+			Usernames: []string{"admin", "root"},
+			Passwords: []string{"12345", "root"},
+		}
+	)
+
+	tests := []struct {
+		description string
+
+		targets []Stream
+
+		performErr error
+
+		expectedStreams []Stream
+		expectedErr     error
+	}{
+		{
+			description: "inverted RTSP RFC",
+
+			targets: fakeTargets,
+
+			performErr: errors.New("dummy error"),
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "attack works",
+
+			targets: fakeTargets,
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "no targets",
+
+			targets: nil,
+
+			expectedStreams: nil,
+			expectedErr:     errors.New("no stream found"),
+		},
+	}
+
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			curlerMock := &CurlerMock{}
+
+			if len(test.targets) != 0 {
+				curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
+				curlerMock.On("Perform").Return(test.performErr)
+				if test.performErr == nil {
+					curlerMock.On("Getinfo", mock.Anything).Return(200, nil)
+				}
+			}
+
+			scanner := &Scanner{
+				term:        disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				curl:        curlerMock,
+				timeout:     time.Millisecond,
+				verbose:     true,
+				debug:       true,
+				credentials: fakeCredentials,
+				routes:      fakeRoutes,
+			}
+
+			results, err := scanner.Attack(test.targets)
+
+			assert.Equal(t, test.expectedErr, err)
+
+			assert.Len(t, results, len(test.expectedStreams))
+
+			curlerMock.AssertExpectations(t)
+		})
+	}
+}
+
 func TestAttackCredentials(t *testing.T) {
-	validStream1 := Stream{
-		Device:  "fakeDevice",
-		Address: "fakeAddress",
-		Port:    1337,
-	}
+	var (
+		stream1 = Stream{
+			Device:    "fakeDevice",
+			Address:   "fakeAddress",
+			Port:      1337,
+			Available: true,
+		}
 
-	validStream2 := Stream{
-		Device:  "fakeDevice",
-		Address: "differentFakeAddress",
-		Port:    1337,
-	}
+		stream2 = Stream{
+			Device:    "fakeDevice",
+			Address:   "differentFakeAddress",
+			Port:      1337,
+			Available: true,
+		}
 
-	invalidStream := Stream{
-		Device: "InvalidDevice",
-	}
+		fakeTargets     = []Stream{stream1, stream2}
+		fakeCredentials = Credentials{
+			Usernames: []string{"admin", "root"},
+			Passwords: []string{"12345", "root"},
+		}
+	)
 
-	fakeTargets := []Stream{validStream1, validStream2}
-	invalidTargets := []Stream{invalidStream}
-	fakeCredentials := Credentials{
-		Usernames: []string{"admin", "root"},
-		Passwords: []string{"12345", "root"},
-	}
+	tests := []struct {
+		description string
 
-	testCases := []struct {
 		targets     []Stream
 		credentials Credentials
 		timeout     time.Duration
-		log         bool
+		verbose     bool
 
 		status int
 
@@ -72,10 +164,10 @@ func TestAttackCredentials(t *testing.T) {
 		invalidTargets bool
 
 		expectedStreams []Stream
-		expectedErrMsg  string
 	}{
-		// Credentials found
 		{
+			description: "Credentials found",
+
 			targets:     fakeTargets,
 			credentials: fakeCredentials,
 			timeout:     1 * time.Millisecond,
@@ -84,8 +176,9 @@ func TestAttackCredentials(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Camera accessed
 		{
+			description: "Camera accessed",
+
 			targets:     fakeTargets,
 			credentials: fakeCredentials,
 			timeout:     1 * time.Millisecond,
@@ -94,19 +187,9 @@ func TestAttackCredentials(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Invalid targets
 		{
-			targets:     invalidTargets,
-			credentials: fakeCredentials,
-			timeout:     1 * time.Millisecond,
+			description: "curl perform fails",
 
-			invalidTargets: true,
-
-			expectedErrMsg:  "invalid targets",
-			expectedStreams: invalidTargets,
-		},
-		// curl perform fails
-		{
 			targets:     fakeTargets,
 			credentials: fakeCredentials,
 			timeout:     1 * time.Millisecond,
@@ -115,8 +198,9 @@ func TestAttackCredentials(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// curl getinfo fails
 		{
+			description: "curl getinfo fails",
+
 			targets:     fakeTargets,
 			credentials: fakeCredentials,
 			timeout:     1 * time.Millisecond,
@@ -125,94 +209,89 @@ func TestAttackCredentials(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Logging disabled
 		{
+			description: "Verbose mode disabled",
+
 			targets:     fakeTargets,
 			credentials: fakeCredentials,
 			timeout:     1 * time.Millisecond,
-			log:         false,
+			verbose:     false,
 
 			status: 403,
 
 			expectedStreams: fakeTargets,
 		},
-		// Logging enabled
 		{
+			description: "Verbose mode enabled",
+
 			targets:     fakeTargets,
 			credentials: fakeCredentials,
 			timeout:     1 * time.Millisecond,
-			log:         true,
+			verbose:     true,
 
 			status: 403,
 
 			expectedStreams: fakeTargets,
 		},
 	}
-	for i, test := range testCases {
-		curlerMock := &CurlerMock{}
 
-		if !test.invalidTargets {
-			curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
-			curlerMock.On("Perform").Return(test.performErr)
-			if test.performErr == nil {
-				curlerMock.On("Getinfo", mock.Anything).Return(test.status, test.getInfoErr)
-			}
-		}
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			curlerMock := &CurlerMock{}
 
-		results, err := AttackCredentials(curlerMock, test.targets, test.credentials, test.timeout, test.log)
-
-		if len(test.expectedErrMsg) > 0 {
-			if err == nil {
-				fmt.Printf("unexpected success in AttackCredentials test, iteration %d. expected error: %s\n", i, test.expectedErrMsg)
-				os.Exit(1)
-			}
-			assert.Contains(t, err.Error(), test.expectedErrMsg, "wrong error message")
-		} else {
-			if err != nil {
-				fmt.Printf("unexpected error in AttackCredentials test, iteration %d: %v\n", i, err)
-				os.Exit(1)
-			}
-			for _, stream := range test.expectedStreams {
-				foundStream := false
-				for _, result := range results {
-					if result.Address == stream.Address && result.Device == stream.Device && result.Port == stream.Port {
-						foundStream = true
-					}
+			if !test.invalidTargets {
+				curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
+				curlerMock.On("Perform").Return(test.performErr)
+				if test.performErr == nil {
+					curlerMock.On("Getinfo", mock.Anything).Return(test.status, test.getInfoErr)
 				}
-				assert.Equal(t, true, foundStream, "wrong streams parsed")
 			}
-		}
-		assert.Equal(t, len(test.expectedStreams), len(results), "wrong streams parsed")
-		curlerMock.AssertExpectations(t)
+
+			scanner := &Scanner{
+				term:        disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				curl:        curlerMock,
+				timeout:     test.timeout,
+				verbose:     test.verbose,
+				debug:       test.verbose,
+				credentials: test.credentials,
+			}
+
+			results := scanner.AttackCredentials(test.targets)
+
+			assert.Len(t, results, len(test.expectedStreams))
+
+			curlerMock.AssertExpectations(t)
+		})
 	}
 }
 
 func TestAttackRoute(t *testing.T) {
-	validStream1 := Stream{
-		Device:  "fakeDevice",
-		Address: "fakeAddress",
-		Port:    1337,
-	}
+	var (
+		stream1 = Stream{
+			Device:    "fakeDevice",
+			Address:   "fakeAddress",
+			Port:      1337,
+			Available: true,
+		}
 
-	validStream2 := Stream{
-		Device:  "fakeDevice",
-		Address: "differentFakeAddress",
-		Port:    1337,
-	}
+		stream2 = Stream{
+			Device:    "fakeDevice",
+			Address:   "differentFakeAddress",
+			Port:      1337,
+			Available: true,
+		}
 
-	invalidStream := Stream{
-		Device: "InvalidDevice",
-	}
+		fakeTargets = []Stream{stream1, stream2}
+		fakeRoutes  = Routes{"live.sdp", "media.amp"}
+	)
 
-	fakeTargets := []Stream{validStream1, validStream2}
-	fakeRoutes := Routes{"live.sdp", "media.amp"}
-	invalidTargets := []Stream{invalidStream}
+	tests := []struct {
+		description string
 
-	testCases := []struct {
 		targets []Stream
 		routes  Routes
 		timeout time.Duration
-		log     bool
+		verbose bool
 
 		status int
 
@@ -221,10 +300,11 @@ func TestAttackRoute(t *testing.T) {
 		invalidTargets bool
 
 		expectedStreams []Stream
-		expectedErrMsg  string
+		expectedErr     error
 	}{
-		// Route found
 		{
+			description: "Route found",
+
 			targets: fakeTargets,
 			routes:  fakeRoutes,
 			timeout: 1 * time.Millisecond,
@@ -233,8 +313,9 @@ func TestAttackRoute(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Route found
 		{
+			description: "Route found",
+
 			targets: fakeTargets,
 			routes:  fakeRoutes,
 			timeout: 1 * time.Millisecond,
@@ -243,8 +324,9 @@ func TestAttackRoute(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Camera accessed
 		{
+			description: "Camera accessed",
+
 			targets: fakeTargets,
 			routes:  fakeRoutes,
 			timeout: 1 * time.Millisecond,
@@ -253,18 +335,9 @@ func TestAttackRoute(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Invalid targets
 		{
-			targets:        invalidTargets,
-			routes:         fakeRoutes,
-			timeout:        1 * time.Millisecond,
-			invalidTargets: true,
+			description: "curl perform fails",
 
-			expectedErrMsg:  "invalid targets",
-			expectedStreams: invalidTargets,
-		},
-		// curl perform fails
-		{
 			targets: fakeTargets,
 			routes:  fakeRoutes,
 			timeout: 1 * time.Millisecond,
@@ -273,8 +346,9 @@ func TestAttackRoute(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// curl getinfo fails
 		{
+			description: "curl getinfo fails",
+
 			targets: fakeTargets,
 			routes:  fakeRoutes,
 			timeout: 1 * time.Millisecond,
@@ -283,93 +357,178 @@ func TestAttackRoute(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Logs disabled
 		{
+			description: "verbose mode disabled",
+
 			targets: fakeTargets,
 			routes:  fakeRoutes,
 			timeout: 1 * time.Millisecond,
-			log:     false,
+			verbose: false,
 
 			expectedStreams: fakeTargets,
 		},
-		// Logs enabled
 		{
+			description: "verbose mode enabled",
+
 			targets: fakeTargets,
 			routes:  fakeRoutes,
 			timeout: 1 * time.Millisecond,
-			log:     true,
+			verbose: true,
 
 			expectedStreams: fakeTargets,
 		},
 	}
-	for i, test := range testCases {
-		curlerMock := &CurlerMock{}
 
-		if !test.invalidTargets {
-			curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
-			curlerMock.On("Perform").Return(test.performErr)
-			if test.performErr == nil {
-				curlerMock.On("Getinfo", mock.Anything).Return(test.status, test.getInfoErr)
-			}
-		}
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			curlerMock := &CurlerMock{}
 
-		results, err := AttackRoute(curlerMock, test.targets, test.routes, test.timeout, test.log)
-
-		if len(test.expectedErrMsg) > 0 {
-			if err == nil {
-				fmt.Printf("unexpected success in AttackRoute test, iteration %d. expected error: %s\n", i, test.expectedErrMsg)
-				os.Exit(1)
-			}
-			assert.Contains(t, err.Error(), test.expectedErrMsg, "wrong error message")
-		} else {
-			if err != nil {
-				fmt.Printf("unexpected error in AttackRoute test, iteration %d: %v\n", i, err)
-				os.Exit(1)
-			}
-			for _, stream := range test.expectedStreams {
-				foundStream := false
-				for _, result := range results {
-					if result.Address == stream.Address && result.Device == stream.Device && result.Port == stream.Port {
-						foundStream = true
-					}
+			if !test.invalidTargets {
+				curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
+				curlerMock.On("Perform").Return(test.performErr)
+				if test.performErr == nil {
+					curlerMock.On("Getinfo", mock.Anything).Return(test.status, test.getInfoErr)
 				}
-				assert.Equal(t, true, foundStream, "wrong streams parsed")
 			}
+
+			scanner := &Scanner{
+				term:    disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				curl:    curlerMock,
+				timeout: test.timeout,
+				verbose: test.verbose,
+				debug:   test.verbose,
+				routes:  test.routes,
+			}
+
+			results := scanner.AttackRoute(test.targets)
+
+			assert.Len(t, results, len(test.expectedStreams))
+
+			curlerMock.AssertExpectations(t)
+		})
+	}
+}
+
+func TestAttackRoute_NoDummyRoute(t *testing.T) {
+	var (
+		stream1 = Stream{
+			Device:    "fakeDevice",
+			Address:   "fakeAddress",
+			Port:      1337,
+			Available: true,
 		}
-		assert.Equal(t, len(test.expectedStreams), len(results), "wrong streams parsed")
-		curlerMock.AssertExpectations(t)
+
+		stream2 = Stream{
+			Device:    "fakeDevice",
+			Address:   "differentFakeAddress",
+			Port:      1337,
+			Available: true,
+		}
+
+		fakeTargets = []Stream{stream1, stream2}
+		fakeRoutes  = Routes{"live.sdp", "media.amp"}
+	)
+
+	tests := []struct {
+		description string
+
+		targets []Stream
+		routes  Routes
+		timeout time.Duration
+		verbose bool
+
+		status int
+
+		expectedStreams []Stream
+		expectedErr     error
+	}{
+		{
+			description: "Route found",
+
+			targets: fakeTargets,
+			routes:  fakeRoutes,
+			timeout: 1 * time.Millisecond,
+
+			status: 403,
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "Route found",
+
+			targets: fakeTargets,
+			routes:  fakeRoutes,
+			timeout: 1 * time.Millisecond,
+
+			status: 401,
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "Camera accessed",
+
+			targets: fakeTargets,
+			routes:  fakeRoutes,
+			timeout: 1 * time.Millisecond,
+
+			status: 200,
+
+			expectedStreams: fakeTargets,
+		},
+	}
+
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			curlerMock := &CurlerMock{}
+			curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
+			curlerMock.On("Perform").Return(nil)
+
+			// 404 on first call to the dummy route.
+			curlerMock.On("Getinfo", mock.Anything).Return(404, nil).Once()
+			curlerMock.On("Getinfo", mock.Anything).Return(test.status, nil)
+
+			scanner := &Scanner{
+				term:    disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				curl:    curlerMock,
+				timeout: test.timeout,
+				verbose: test.verbose,
+				routes:  test.routes,
+			}
+
+			results := scanner.AttackRoute(test.targets)
+
+			assert.Len(t, results, len(test.expectedStreams))
+
+			curlerMock.AssertExpectations(t)
+		})
 	}
 }
 
 func TestValidateStreams(t *testing.T) {
-	validStream1 := Stream{
-		Device:    "fakeDevice",
-		Address:   "fakeAddress",
-		Port:      1337,
-		Available: true,
-	}
+	var (
+		stream1 = Stream{
+			Device:    "fakeDevice",
+			Address:   "fakeAddress",
+			Port:      1337,
+			Available: true,
+		}
 
-	validStream2 := Stream{
-		Device:    "fakeDevice",
-		Address:   "differentFakeAddress",
-		Port:      1337,
-		Available: true,
-	}
+		stream2 = Stream{
+			Device:    "fakeDevice",
+			Address:   "differentFakeAddress",
+			Port:      1337,
+			Available: true,
+		}
 
-	unavailableStream := Stream{
-		Device:    "fakeDevice",
-		Available: false,
-	}
+		fakeTargets = []Stream{stream1, stream2}
+	)
 
-	fakeTargets := []Stream{validStream1, validStream2}
-	unavailableTargets := []Stream{unavailableStream}
-
-	testCases := []struct {
-		desc string
+	tests := []struct {
+		description string
 
 		targets []Stream
 		timeout time.Duration
-		log     bool
+		verbose bool
 
 		status int
 
@@ -377,11 +536,9 @@ func TestValidateStreams(t *testing.T) {
 		getInfoErr error
 
 		expectedStreams []Stream
-		expectedErrMsg  string
 	}{
-		// Route found
 		{
-			desc: "route found",
+			description: "route found",
 
 			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
@@ -390,9 +547,8 @@ func TestValidateStreams(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Route found
 		{
-			desc: "route found",
+			description: "route found",
 
 			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
@@ -401,9 +557,8 @@ func TestValidateStreams(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Camera accessed
 		{
-			desc: "camera accessed",
+			description: "camera accessed",
 
 			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
@@ -412,20 +567,18 @@ func TestValidateStreams(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Unavailable stream
 		{
-			desc: "unavailable stream",
+			description: "unavailable stream",
 
-			targets: unavailableTargets,
+			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
 
 			status: 400,
 
-			expectedStreams: unavailableTargets,
+			expectedStreams: fakeTargets,
 		},
-		// curl perform fails
 		{
-			desc: "curl perform fails",
+			description: "curl perform fails",
 
 			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
@@ -434,9 +587,8 @@ func TestValidateStreams(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// curl getinfo fails
 		{
-			desc: "curl getinfo fails",
+			description: "curl getinfo fails",
 
 			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
@@ -445,66 +597,190 @@ func TestValidateStreams(t *testing.T) {
 
 			expectedStreams: fakeTargets,
 		},
-		// Logs disabled
 		{
-			desc: "logs disabled",
+			description: "verbose disabled",
 
 			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
-			log:     false,
+			verbose: false,
 
 			expectedStreams: fakeTargets,
 		},
-		// Logs enabled
 		{
-			desc: "logs enabled",
+			description: "verbose enabled",
 
 			targets: fakeTargets,
 			timeout: 1 * time.Millisecond,
-			log:     true,
+			verbose: true,
 
 			expectedStreams: fakeTargets,
 		},
 	}
-	for i, tC := range testCases {
-		t.Run(tC.desc, func(t *testing.T) {
+
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
 			curlerMock := &CurlerMock{}
 
 			curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
-			curlerMock.On("Perform").Return(tC.performErr)
-			if tC.performErr == nil {
-				curlerMock.On("Getinfo", mock.Anything).Return(tC.status, tC.getInfoErr)
+			curlerMock.On("Perform").Return(test.performErr)
+			if test.performErr == nil {
+				curlerMock.On("Getinfo", mock.Anything).Return(test.status, test.getInfoErr)
 			}
 
-			results, err := ValidateStreams(curlerMock, tC.targets, tC.timeout, tC.log)
-
-			if len(tC.expectedErrMsg) > 0 {
-				if err == nil {
-					fmt.Printf("unexpected success in ValidateStream test, iteration %d. expected error: %s\n", i, tC.expectedErrMsg)
-					os.Exit(1)
-				}
-				assert.Contains(t, err.Error(), tC.expectedErrMsg, "wrong error message")
-			} else {
-				if err != nil {
-					fmt.Printf("unexpected error in ValidateStream test, iteration %d: %v\n", i, err)
-					os.Exit(1)
-				}
-				for _, stream := range tC.expectedStreams {
-					foundStream := false
-					for _, result := range results {
-						if result.Address == stream.Address && result.Device == stream.Device && result.Port == stream.Port {
-							foundStream = true
-						}
-					}
-					assert.Equal(t, true, foundStream, "wrong streams parsed")
-				}
+			scanner := &Scanner{
+				term:    disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				curl:    curlerMock,
+				timeout: test.timeout,
+				verbose: test.verbose,
+				debug:   test.verbose,
 			}
-			assert.Equal(t, len(tC.expectedStreams), len(results), "wrong streams parsed")
+
+			results := scanner.ValidateStreams(test.targets)
+
+			assert.Equal(t, len(test.expectedStreams), len(results))
+
+			for _, expectedStream := range test.expectedStreams {
+				assert.Contains(t, results, expectedStream)
+			}
+
 			curlerMock.AssertExpectations(t)
 		})
 	}
 }
 
-func TestDotWrite(t *testing.T) {
+func TestDetectAuthenticationType(t *testing.T) {
+	var (
+		stream1 = Stream{
+			Device:    "fakeDevice",
+			Address:   "fakeAddress",
+			Port:      1337,
+			Available: true,
+		}
+
+		stream2 = Stream{
+			Device:    "fakeDevice",
+			Address:   "differentFakeAddress",
+			Port:      1337,
+			Available: true,
+		}
+
+		fakeTargets = []Stream{stream1, stream2}
+	)
+
+	tests := []struct {
+		description string
+
+		targets []Stream
+		timeout time.Duration
+		verbose bool
+
+		status int
+
+		performErr error
+		getInfoErr error
+
+		expectedStreams []Stream
+	}{
+		{
+			description: "no auth enabled",
+
+			targets: fakeTargets,
+			timeout: 1 * time.Millisecond,
+
+			status: 0,
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "basic auth enabled",
+
+			targets: fakeTargets,
+			timeout: 1 * time.Millisecond,
+
+			status: 1,
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "digest auth enabled",
+
+			targets: fakeTargets,
+			timeout: 1 * time.Millisecond,
+
+			status: 2,
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "curl getinfo fails",
+
+			targets: fakeTargets,
+			timeout: 1 * time.Millisecond,
+
+			getInfoErr: errors.New("dummy error"),
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "curl perform fails",
+
+			targets: fakeTargets,
+			timeout: 1 * time.Millisecond,
+
+			performErr: errors.New("dummy error"),
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "verbose disabled",
+
+			targets: fakeTargets,
+			timeout: 1 * time.Millisecond,
+			verbose: false,
+
+			expectedStreams: fakeTargets,
+		},
+		{
+			description: "verbose enabled",
+
+			targets: fakeTargets,
+			timeout: 1 * time.Millisecond,
+			verbose: true,
+
+			expectedStreams: fakeTargets,
+		},
+	}
+
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			curlerMock := &CurlerMock{}
+
+			curlerMock.On("Setopt", mock.Anything, mock.Anything).Return(nil)
+			curlerMock.On("Perform").Return(test.performErr)
+			if test.performErr == nil {
+				curlerMock.On("Getinfo", mock.Anything).Return(test.status, test.getInfoErr)
+			}
+
+			scanner := &Scanner{
+				term:    disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				curl:    curlerMock,
+				timeout: test.timeout,
+				verbose: test.verbose,
+			}
+
+			results := scanner.DetectAuthMethods(test.targets)
+
+			assert.Equal(t, len(test.expectedStreams), len(results))
+
+			for _, expectedStream := range test.expectedStreams {
+				assert.Contains(t, results, expectedStream)
+			}
+
+			curlerMock.AssertExpectations(t)
+		})
+	}
+}
+
+func TestDoNotWrite(t *testing.T) {
 	assert.Equal(t, true, doNotWrite(nil, nil))
 }

cameradar.go

@@ -1,4 +1,4 @@
-// Package cmrdr provides methods to be able to discover and
+// Package cameradar provides methods to be able to discover and
 // attack RTSP streams easily. RTSP streams are used by most
 // IP Cameras, often for surveillance.
 //
@@ -11,4 +11,4 @@
 // access cameras, or running their own network scan, this
 // library allows to use simple and performant methods to
 // attack streams.
-package cmrdr
+package cameradar

cameradar/cameradar.go

@@ -1,251 +0,0 @@
-package main
-
-import (
-	"errors"
-	"fmt"
-	"os"
-	"strings"
-	"time"
-
-	"github.com/Ullaakut/cameradar"
-
-	curl "github.com/andelf/go-curl"
-	"github.com/fatih/color"
-	"github.com/gernest/wow"
-	"github.com/gernest/wow/spin"
-	"github.com/spf13/pflag"
-	"github.com/spf13/viper"
-)
-
-type options struct {
-	Target      string
-	Ports       string
-	OutputFile  string
-	Routes      string
-	Credentials string
-	Speed       int
-	Timeout     int
-	EnableLogs  bool
-}
-
-func parseArguments() error {
-
-	viper.BindEnv("target", "CAMERADAR_TARGET")
-	viper.BindEnv("ports", "CAMERADAR_PORTS")
-	viper.BindEnv("nmap-output", "CAMERADAR_NMAP_OUTPUT_FILE")
-	viper.BindEnv("custom-routes", "CAMERADAR_CUSTOM_ROUTES")
-	viper.BindEnv("custom-credentials", "CAMERADAR_CUSTOM_CREDENTIALS")
-	viper.BindEnv("speed", "CAMERADAR_SPEED")
-	viper.BindEnv("timeout", "CAMERADAR_TIMEOUT")
-	viper.BindEnv("envlogs", "CAMERADAR_LOGS")
-
-	pflag.StringP("target", "t", "", "The target on which to scan for open RTSP streams - required (ex: 172.16.100.0/24)")
-	pflag.StringP("ports", "p", "554,8554", "The ports on which to search for RTSP streams")
-	pflag.StringP("nmap-output", "o", "/tmp/cameradar_scan.xml", "The path where nmap will create its XML result file")
-	pflag.StringP("custom-routes", "r", "<GOPATH>/src/github.com/Ullaakut/cameradar/dictionaries/routes", "The path on which to load a custom routes dictionary")
-	pflag.StringP("custom-credentials", "c", "<GOPATH>/src/github.com/Ullaakut/cameradar/dictionaries/credentials.json", "The path on which to load a custom credentials JSON dictionary")
-	pflag.IntP("speed", "s", 4, "The nmap speed preset to use")
-	pflag.IntP("timeout", "T", 2000, "The timeout in miliseconds to use for attack attempts")
-	pflag.BoolP("log", "l", false, "Enable the logs for nmap's output to stdout")
-	pflag.BoolP("help", "h", false, "displays this help message")
-
-	viper.AutomaticEnv()
-
-	pflag.Parse()
-
-	err := viper.BindPFlags(pflag.CommandLine)
-	if err != nil {
-		return err
-	}
-
-	if viper.GetBool("help") {
-		pflag.Usage()
-		fmt.Println("\nExamples of usage:")
-		fmt.Println("\tScanning your home network for RTSP streams:\tcameradar -t 192.168.0.0/24")
-		fmt.Println("\tScanning a remote camera on a specific port:\tcameradar -t 172.178.10.14 -p 18554 -s 2")
-		fmt.Println("\tScanning an unstable remote network: \t\tcameradar -t 172.178.10.14/24 -s 1 --timeout 10000 -l")
-		os.Exit(0)
-	}
-
-	if viper.GetString("target") == "" {
-		return errors.New("target (-t, --target) argument required\n    examples:\n      - 172.16.100.0/24\n      - localhost\n      - 8.8.8.8")
-	}
-
-	return nil
-}
-
-func main() {
-	var options options
-
-	err := parseArguments()
-	if err != nil {
-		printErr(err)
-	}
-
-	options.Credentials = viper.GetString("custom-credentials")
-	options.EnableLogs = viper.GetBool("log") || viper.GetBool("envlogs")
-	options.OutputFile = viper.GetString("nmap-output")
-	options.Ports = viper.GetString("ports")
-	options.Routes = viper.GetString("custom-routes")
-	options.Speed = viper.GetInt("speed")
-	options.Timeout = viper.GetInt("timeout")
-	options.Target = viper.GetString("target")
-
-	w := startSpinner(options.EnableLogs)
-
-	options.Target, err = cmrdr.ParseTargetsFile(options.Target)
-	if err != nil {
-		printErr(err)
-	}
-
-	err = curl.GlobalInit(curl.GLOBAL_ALL)
-	handle := curl.EasyInit()
-	if err != nil || handle == nil {
-		printErr(errors.New("libcurl initialization failed"))
-	}
-	c := &cmrdr.Curl{CURL: handle}
-	defer curl.GlobalCleanup()
-
-	updateSpinner(w, "Loading dictionaries...", options.EnableLogs)
-	gopath := os.Getenv("GOPATH")
-	options.Credentials = strings.Replace(options.Credentials, "<GOPATH>", gopath, 1)
-	options.Routes = strings.Replace(options.Routes, "<GOPATH>", gopath, 1)
-
-	credentials, err := cmrdr.LoadCredentials(options.Credentials)
-	if err != nil {
-		color.Red("Invalid credentials dictionary: %s", err.Error())
-		return
-	}
-
-	routes, err := cmrdr.LoadRoutes(options.Routes)
-	if err != nil {
-		color.Red("Invalid routes dictionary: %s", err.Error())
-		return
-	}
-
-	updateSpinner(w, "Scanning the network...", options.EnableLogs)
-	streams, err := cmrdr.Discover(options.Target, options.Ports, options.OutputFile, options.Speed, options.EnableLogs)
-	if err != nil && len(streams) > 0 {
-		printErr(err)
-	}
-
-	// Most cameras will be accessed successfully with these two attacks
-	updateSpinner(w, "Found "+fmt.Sprint(len(streams))+" streams. Attacking their routes...", options.EnableLogs)
-	streams, err = cmrdr.AttackRoute(c, streams, routes, time.Duration(options.Timeout)*time.Millisecond, options.EnableLogs)
-	if err != nil && len(streams) > 0 {
-		printErr(err)
-	}
-
-	updateSpinner(w, "Found "+fmt.Sprint(len(streams))+" streams. Attacking their credentials...", options.EnableLogs)
-	streams, err = cmrdr.AttackCredentials(c, streams, credentials, time.Duration(options.Timeout)*time.Millisecond, options.EnableLogs)
-	if err != nil && len(streams) > 0 {
-		printErr(err)
-	}
-
-	// But some cameras run GST RTSP Server which prioritizes 401 over 404 contrary to most cameras.
-	// For these cameras, running another route attack will solve the problem.
-	for _, stream := range streams {
-		if !stream.RouteFound || !stream.CredentialsFound {
-
-			updateSpinner(w, "Found "+fmt.Sprint(len(streams))+" streams. Final attack...", options.EnableLogs)
-			streams, err = cmrdr.AttackRoute(c, streams, routes, time.Duration(options.Timeout)*time.Millisecond, options.EnableLogs)
-			if err != nil && len(streams) > 0 {
-				printErr(err)
-			}
-			break
-		}
-	}
-
-	updateSpinner(w, "Found "+fmt.Sprint(len(streams))+" streams. Validating their availability...", options.EnableLogs)
-	streams, err = cmrdr.ValidateStreams(c, streams, time.Duration(options.Timeout)*time.Millisecond, options.EnableLogs)
-	if err != nil && len(streams) > 0 {
-		printErr(err)
-	}
-
-	clearOutput(w, options.EnableLogs)
-	prettyPrint(streams)
-}
-
-func prettyPrint(streams []cmrdr.Stream) {
-	yellow := color.New(color.FgYellow, color.Bold, color.Underline).SprintFunc()
-	blue := color.New(color.FgBlue, color.Underline).SprintFunc()
-	green := color.New(color.FgGreen, color.Bold).SprintFunc()
-	red := color.New(color.FgRed, color.Bold).SprintFunc()
-	white := color.New(color.Italic).SprintFunc()
-
-	success := 0
-
-	if len(streams) > 0 {
-		for _, stream := range streams {
-			if stream.CredentialsFound && stream.RouteFound && stream.Available {
-				fmt.Printf("%s\tDevice RTSP URL:\t%s\n", green("\xE2\x96\xB6"), blue(cmrdr.GetCameraRTSPURL(stream)))
-				success++
-			} else {
-				fmt.Printf("%s\tAdmin panel URL:\t%s %s\n", red("\xE2\x96\xB6"), yellow(cmrdr.GetCameraAdminPanelURL(stream)), white("You can use this URL to try attacking the camera's admin panel instead."))
-			}
-
-			fmt.Printf("\tDevice model:\t\t%s\n\n", stream.Device)
-
-			if stream.Available {
-				fmt.Printf("\tAvailable:\t\t%s\n", green("yes"))
-			} else {
-				fmt.Printf("\tAvailable:\t\t%s\n", red("no"))
-			}
-
-			fmt.Printf("\tIP address:\t\t%s\n", stream.Address)
-			fmt.Printf("\tRTSP port:\t\t%d\n", stream.Port)
-			if stream.CredentialsFound {
-				fmt.Printf("\tUsername:\t\t%s\n", green(stream.Username))
-				fmt.Printf("\tPassword:\t\t%s\n", green(stream.Password))
-			} else {
-				fmt.Printf("\tUsername:\t\t%s\n", red("not found"))
-				fmt.Printf("\tPassword:\t\t%s\n", red("not found"))
-			}
-			if stream.RouteFound {
-				fmt.Printf("\tRTSP route:\t\t%s\n\n\n", green("/"+stream.Route))
-			} else {
-				fmt.Printf("\tRTSP route:\t\t%s\n\n\n", red("not found"))
-			}
-		}
-		if success > 1 {
-			fmt.Printf("%s Successful attack: %s devices were accessed", green("\xE2\x9C\x94"), green(len(streams)))
-		} else if success == 1 {
-			fmt.Printf("%s Successful attack: %s device was accessed", green("\xE2\x9C\x94"), green(len(streams)))
-		} else {
-			fmt.Printf("%s Streams were found but none were accessed. They are most likely configured with secure credentials and routes. You can try adding entries to the dictionary or generating your own in order to attempt a bruteforce attack on the cameras.\n", red("\xE2\x9C\x96"))
-		}
-	} else {
-		fmt.Printf("%s No streams were found. Please make sure that your target is on an accessible network.\n", red("\xE2\x9C\x96"))
-	}
-}
-
-func printErr(err error) {
-	red := color.New(color.FgRed, color.Bold).SprintFunc()
-	fmt.Printf("%s %v\n", red("\xE2\x9C\x96"), err)
-	os.Exit(1)
-}
-
-func updateSpinner(w *wow.Wow, text string, disabled bool) {
-	if !disabled {
-		w.Text(" " + text)
-	}
-}
-
-func startSpinner(disabled bool) *wow.Wow {
-	if !disabled {
-		w := wow.New(os.Stdout, spin.Get(spin.Dots), " Loading dictionaries...")
-		w.Start()
-		return w
-	}
-	return nil
-}
-
-// HACK: Waiting for a fix to issue
-// https://github.com/gernest/wow/issues/5
-func clearOutput(w *wow.Wow, disabled bool) {
-	if !disabled {
-		w.Text("\b")
-		time.Sleep(80 * time.Millisecond)
-		w.Stop()
-	}
-}

cmd/cameradar/cameradar.go

@@ -0,0 +1,96 @@
+package main
+
+import (
+	"errors"
+	"fmt"
+	"os"
+	"strings"
+	"time"
+
+	"github.com/Ullaakut/cameradar/v5"
+	"github.com/Ullaakut/disgo"
+	"github.com/Ullaakut/disgo/style"
+	"github.com/spf13/pflag"
+	"github.com/spf13/viper"
+)
+
+func parseArguments() error {
+	viper.SetEnvPrefix("cameradar")
+	viper.SetEnvKeyReplacer(strings.NewReplacer("-", "_"))
+
+	pflag.StringSliceP("targets", "t", []string{}, "The targets on which to scan for open RTSP streams - required (ex: 172.16.100.0/24)")
+	pflag.StringSliceP("ports", "p", []string{"554", "5554", "8554"}, "The ports on which to search for RTSP streams")
+	pflag.StringP("custom-routes", "r", "${GOPATH}/src/github.com/Ullaakut/cameradar/dictionaries/routes", "The path on which to load a custom routes dictionary")
+	pflag.StringP("custom-credentials", "c", "${GOPATH}/src/github.com/Ullaakut/cameradar/dictionaries/credentials.json", "The path on which to load a custom credentials JSON dictionary")
+	pflag.IntP("scan-speed", "s", 4, "The nmap speed preset to use for scanning (lower is stealthier)")
+	pflag.DurationP("attack-interval", "I", 0, "The interval between each attack  (i.e: 2000ms, higher is stealthier)")
+	pflag.DurationP("timeout", "T", 2000*time.Millisecond, "The timeout to use for attack attempts (i.e: 2000ms)")
+	pflag.BoolP("debug", "d", false, "Enable the debug logs")
+	pflag.BoolP("verbose", "v", false, "Enable the verbose logs")
+	pflag.BoolP("help", "h", false, "displays this help message")
+
+	viper.AutomaticEnv()
+
+	pflag.Parse()
+
+	err := viper.BindPFlags(pflag.CommandLine)
+	if err != nil {
+		return err
+	}
+
+	if viper.GetBool("help") {
+		pflag.Usage()
+		fmt.Println("\nExamples of usage:")
+		fmt.Println("\tScanning your home network for RTSP streams:\tcameradar -t 192.168.0.0/24")
+		fmt.Println("\tScanning a remote camera on a specific port:\tcameradar -t 172.178.10.14 -p 18554 -s 2")
+		fmt.Println("\tScanning an unstable remote network: \t\tcameradar -t 172.178.10.14/24 -s 1 --timeout 10000 -l")
+		fmt.Println("\tStealthily scanning a remote network: \t\tcameradar -t 172.178.10.14/24 -s 1 -I 5000")
+		os.Exit(0)
+	}
+
+	if len(viper.GetStringSlice("targets")) == 0 {
+		pflag.Usage()
+		return errors.New("targets (-t, --targets) argument required\n    examples:\n      - 172.16.100.0/24\n      - localhost\n      - 8.8.8.8")
+	}
+
+	return nil
+}
+
+func main() {
+	err := parseArguments()
+	if err != nil {
+		printErr(err)
+	}
+
+	c, err := cameradar.New(
+		cameradar.WithTargets(viper.GetStringSlice("targets")),
+		cameradar.WithPorts(viper.GetStringSlice("ports")),
+		cameradar.WithDebug(viper.GetBool("debug")),
+		cameradar.WithVerbose(viper.GetBool("verbose")),
+		cameradar.WithCustomCredentials(viper.GetString("custom-credentials")),
+		cameradar.WithCustomRoutes(viper.GetString("custom-routes")),
+		cameradar.WithScanSpeed(viper.GetInt("scan-speed")),
+		cameradar.WithAttackInterval(viper.GetDuration("attack-interval")),
+		cameradar.WithTimeout(viper.GetDuration("timeout")),
+	)
+	if err != nil {
+		printErr(err)
+	}
+
+	scanResult, err := c.Scan()
+	if err != nil {
+		printErr(err)
+	}
+
+	streams, err := c.Attack(scanResult)
+	if err != nil {
+		printErr(err)
+	}
+
+	c.PrintStreams(streams)
+}
+
+func printErr(err error) {
+	disgo.Errorln(style.Failure(style.SymbolCross), err)
+	os.Exit(1)
+}

curl.go

@@ -1,7 +1,7 @@
-package cmrdr
+package cameradar
 
 import (
-	curl "github.com/andelf/go-curl"
+	curl "github.com/Ullaakut/go-curl"
 )
 
 // Curler is an interface that implements the CURL interface of the go-curl library

curl_test.go

@@ -0,0 +1,20 @@
+package cameradar
+
+import (
+	"reflect"
+	"testing"
+
+	curl "github.com/Ullaakut/go-curl"
+)
+
+func TestCurl(t *testing.T) {
+	handle := Curl{
+		CURL: curl.EasyInit(),
+	}
+
+	handle2 := handle.Duphandle()
+
+	if reflect.DeepEqual(handle, handle2) {
+		t.Errorf("unexpected identical handle from duphandle: expected %+v got %+v", handle, handle2)
+	}
+}

dictionaries/credentials.json

@@ -1,41 +1,81 @@
 {
   "usernames": [
     "",
-    "admin",
-    "Admin",
-    "Administrator",
-    "root",
-    "supervisor",
-    "ubnt",
-    "service",
-    "Dinion",
-    "administrator",
     "666666",
     "888888",
-    "admin1"
-  ],
-  "passwords" : [
-    "",
+    "Admin",
     "admin",
-    "9999",
-    "123456",
-    "pass",
-    "camera",
-    "1234",
-    "12345",
-    "fliradmin",
-    "system",
-    "jvc",
-    "meinsm",
+    "admin1",
+    "administrator",
+    "Administrator",
+    "aiphone",
+    "Dinion",
+    "none",
     "root",
-    "4321",
+    "Root",
+    "service",
+    "supervisor",
+    "ubnt"
+  ],
+  "passwords": [
+    "",
+    "0000",
+    "00000",
+    "1111",
     "111111",
     "1111111",
-    "password",
+    "123",
+    "1234",
+    "12345",
+    "123456",
+    "1234567",
+    "12345678",
+    "123456789",
+    "12345678910",
+    "4321",
+    "666666",
+    "6fJjMKYx",
+    "888888",
+    "9999",
+    "admin",
+    "admin123456",
+    "admin pass",
+    "Admin",
+    "admin123",
+    "administrator",
+    "Administrator",
+    "aiphone",
+    "camera",
+    "Camera",
+    "fliradmin",
+    "GRwvcj8j",
+    "hikvision",
+    "hikadmin",
+    "HuaWei123",
     "ikwd",
+    "jvc",
+    "kj3TqCWv",
+    "meinsm",
+    "pass",
+    "Pass",
+    "password",
+    "password123",
+    "qwerty",
+    "qwerty123",
+    "Recorder",
+    "reolink",
+    "root",
+    "service",
     "supervisor",
+    "support",
+    "system",
+    "tlJwpbo6",
+    "toor",
+    "tp-link",
     "ubnt",
+    "user",
+    "wbox",
     "wbox123",
-    "service"
+    "Y5eIMz3C"
   ]
 }

dictionaries/routes

@@ -1,50 +1,127 @@
 
+/live/ch01_0
+0/1:1/main
+0/usrnm:pwd/main
+0/video1
+1
 1.AMP
+1/h264major
 1/stream1
+11
+12
+125
+1080p
+1440p
+480p
+4K
+666
+720p
+AVStream1_1
 CAM_ID.password.mp2
+CH001.sdp
 GetData.cgi
+HD
+HighResolutionVideo
+LowResolutionVideo
 MediaInput/h264
 MediaInput/mpeg4
+ONVIF/MediaInput
+ONVIF/MediaInput?profile=4_def_profile6
+StdCh1
+Streaming/Channels/1
+Streaming/Unicast/channels/101
+StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=1&ChannelName=Channel1
 VideoInput/1/h264/1
+VideoInput/1/mpeg4/1
 access_code
 access_name_for_stream_1_to_5
+api/mjpegvideo.cgi
 av0_0
 av2
+avc
 avn=2
 axis-media/media.amp
+axis-media/media.amp?camera=1
+axis-media/media.amp?videocodec=h264
 cam
+cam/realmonitor
+cam/realmonitor?channel=0&subtype=0
+cam/realmonitor?channel=1&subtype=0
+cam/realmonitor?channel=1&subtype=1
+cam/realmonitor?channel=1&subtype=1&unicast=true&proto=Onvif
+cam0
 cam0_0
 cam0_1
+cam1
 cam1/h264
 cam1/h264/multicast
 cam1/mjpeg
 cam1/mpeg4
+cam1/mpeg4?user='username'&pwd='password'
+cam1/onvif-h264
 camera.stm
 ch0
+ch00/0
 ch001.sdp
 ch01.264
+ch01.264?
+ch01.264?ptype=tcp
+ch1_0
+ch2_0
+ch3_0
+ch4_0
+ch1/0
+ch2/0
+ch3/0
+ch4/0
+ch0_0.h264
 ch0_unicast_firststream
 ch0_unicast_secondstream
+ch1-s1
 channel1
+gnz_media/main
 h264
+h264.sdp
+h264/ch1/sub/av_stream
 h264/media.amp
+h264Preview_01_main
+h264Preview_01_sub
+h264_vga.sdp
+h264_stream
 image.mpg
 img/media.sav
+img/media.sav?channel=1
 img/video.asf
 img/video.sav
 ioImage/1
 ipcam.sdp
 ipcam_h264.sdp
+ipcam_mjpeg.sdp
+live
 live.sdp
+live/av0
+live/ch0
+live/ch00_0
+live/ch01_0
 live/h264
+live/main
+live/main0
 live/mpeg4
+live1.sdp
+live3.sdp
 live_mpeg4.sdp
+live_st1
 livestream
-livestream/
+main
+media
+media.amp
+media.amp?streamprofile=Profile1
 media/media.amp
 media/video1
+medias2
 mjpeg/media.smp
 mp4
+mpeg/media.amp
 mpeg4
 mpeg4/1/media.amp
 mpeg4/media.amp
@@ -55,59 +132,66 @@ multicaststream
 now.mp4
 nph-h264.cgi
 nphMpeg4/g726-640x
+nphMpeg4/g726-640x48
 nphMpeg4/g726-640x480
 nphMpeg4/nil-320x240
+onvif-media/media.amp
+onvif1
+pass@10.0.0.5:6667/blinkhd
 play1.sdp
 play2.sdp
+profile0
+profile1
+profile2
+profile2/media.smp
+profile5/media.smp
 rtpvideo1.sdp
 rtsp_live0
 rtsp_live1
 rtsp_live2
 rtsp_tunnel
 rtsph264
+rtsph2641080p
+snap.jpg
+stream
+stream/0
+stream/1
+stream/live.sdp
+stream.sdp
 stream1
+streaming/channels/0
+streaming/channels/1
+streaming/channels/101
+tcp/av0_0
+test
+tmpfs/auto.jpg
+trackID=1
+ucast/11
+udp/av0_0
+udp/unicast/aiphone_H264
+udpstream
 user.pin.mp2
+user=admin&password=&channel=1&stream=0.sdp?
+user=admin&password=&channel=1&stream=0.sdp?real_stream
+user=admin_password=?????_channel=1_stream=0.sdp?real_stream
+user=admin_password=R5XFY888_channel=1_stream=0.sdp?real_stream
 user_defined
+v2
 video
 video.3gp
+video.h264
+video.mjpg
 video.mp4
+video.pro1
+video.pro2
+video.pro3
+video0
+video0.sdp
 video1
+video1.sdp
 video1+audio1
+videoMain
+videoinput_1/h264_1/media.stm
+videostream.asf
 vis
 wfov
-video.h264
-11
-12
-ch1-s1
-live3.sdp
-onvif-media/media.amp
-axis-media/media.amp
-axis-media/media.amp?videocodec=h264
-mpeg4/media.amp
-stream
-cam/realmonitor
-live
-video.pro2
-videoMain
-VideoInput/1/mpeg4/1
-VideoInput/1/h264/1
-video.pro3
-video.pro1
-video.mjpg
-h264_vga.sdp
-media.amp
-media
-ONVIF/MediaInput
-nphMpeg4/g726-640x48
-MediaInput/mpeg4
-MediaInput/h264
-Streaming/Channels/1
-ch0_0.h264
-rtsph2641080p
-live/av0
-cam1/onvif-h264
-ucast/11
-LowResolutionVideo
-1
-live/ch00_0
-medias2

discover.go

@@ -1,164 +0,0 @@
-package cmrdr
-
-import (
-	"bufio"
-	"encoding/xml"
-	"fmt"
-	"io/ioutil"
-	"os/exec"
-	"strings"
-
-	"github.com/pkg/errors"
-	v "gopkg.in/go-playground/validator.v9"
-)
-
-// These constants detail the different level of nmap speed presets
-// that determine the timeout values and wether or not nmap makes use of parallelism
-const (
-	// PARANOIAC 	NO PARALLELISM | 5min  timeout | 100ms to 10s    round-trip time timeout	 |  5mn   scan delay
-	PARANOIAC = 0
-	// SNEAKY 		NO PARALLELISM | 15sec timeout | 100ms to 10s    round-trip time timeout	 |  15s   scan delay
-	SNEAKY = 1
-	// POLITE 		NO PARALLELISM | 1sec  timeout | 100ms to 10s    round-trip time timeout	 |  400ms scan delay
-	POLITE = 2
-	// NORMAL 		PARALLELISM	   | 1sec  timeout | 100ms to 10s    round-trip time timeout	 |  0s    scan delay
-	NORMAL = 3
-	// AGGRESSIVE 	PARALLELISM	   | 500ms timeout | 100ms to 1250ms round-trip time timeout	 |  0s    scan delay
-	AGGRESSIVE = 4
-	// INSANE 		PARALLELISM	   | 250ms timeout |  50ms to 300ms  round-trip time timeout	 |  0s    scan delay
-	INSANE = 5
-)
-
-// Allows unit tests to override the exec function to avoid launching a real command
-// during the tests. The NmapRun method will soon be refactored with an adaptor in order
-// to make it possible to mock all external calls.
-var execCommand = exec.Command
-
-// NmapRun runs nmap on the specified targets's specified ports, using the given nmap speed.
-func NmapRun(targets, ports, resultFilePath string, nmapSpeed int, enableLogs bool) error {
-	if nmapSpeed < PARANOIAC || nmapSpeed > INSANE {
-		return fmt.Errorf("invalid nmap speed value '%d'. Should be between '%d' and '%d'", nmapSpeed, PARANOIAC, INSANE)
-	}
-
-	cmdArgs := fmt.Sprintf(
-		"-T%d -A -p %s -oX %s %s",
-		nmapSpeed,
-		ports,
-		resultFilePath,
-		targets)
-
-	if enableLogs {
-		fmt.Printf("command: nmap %s\n", cmdArgs)
-	}
-
-	args := strings.Split(cmdArgs, " ")
-
-	// Prepare nmap command
-	cmd := execCommand("nmap", args...)
-
-	// Pipe stdout to be able to write the logs in realtime
-	stdout, err := cmd.StdoutPipe()
-	if err != nil {
-		return errors.Wrap(err, "couldn't get stdout pipe")
-	}
-
-	// Execute the nmap command
-	if err := cmd.Start(); err != nil {
-		return errors.Wrap(err, "coudln't run nmap command")
-	}
-
-	// Scan the pipe until an end of file or an error occurs
-	in := bufio.NewScanner(stdout)
-	for in.Scan() {
-		if enableLogs {
-			fmt.Println(in.Text())
-		}
-	}
-	if err := in.Err(); err != nil {
-		if enableLogs {
-			fmt.Printf("error: %s\n", err)
-		}
-	}
-
-	return nil
-}
-
-// NmapParseResults returns a slice of streams from an NMap XML result file.
-// To generate one yourself, use the -X option when running NMap.
-func NmapParseResults(nmapResultFilePath string) ([]Stream, error) {
-	var streams []Stream
-
-	// Open & Read XML file
-	content, err := ioutil.ReadFile(nmapResultFilePath)
-	if err != nil {
-		return streams, errors.Wrap(err, "could not read nmap result file at "+nmapResultFilePath+":")
-	}
-
-	// Unmarshal content of XML file into data structure
-	result := &nmapResult{}
-	err = xml.Unmarshal(content, &result)
-	if err != nil {
-		return streams, err
-	}
-
-	// Iterate on hosts to try to find hosts with ports that
-	//     - serve RTSP
-	//     - are open
-	validate := v.New()
-	for _, host := range result.Hosts {
-		if host.Ports.Ports == nil {
-			continue
-		}
-		for _, port := range host.Ports.Ports {
-			err = validate.Struct(port)
-			if err != nil {
-				continue
-			}
-
-			for _, addr := range host.Addresses {
-				err = validate.Struct(addr)
-				if err != nil {
-					continue
-				}
-
-				streams = append(streams, Stream{
-					Device:  port.Service.Product,
-					Address: addr.Addr,
-					Port:    port.PortID,
-				})
-			}
-		}
-	}
-
-	return streams, nil
-}
-
-// Discover scans the target networks and tries to find RTSP streams within them.
-//
-// targets can be:
-//
-//    - a subnet (e.g.: 172.16.100.0/24)
-//    - an IP (e.g.: 172.16.100.10)
-//    - a hostname (e.g.: localhost)
-//    - a range of IPs (e.g.: 172.16.100.10-20)
-//
-// ports can be:
-//
-//    - one or multiple ports and port ranges separated by commas (e.g.: 554,8554-8560,18554-28554)
-func Discover(targets, ports, nmapResultPath string, speed int, log bool) ([]Stream, error) {
-	var streams []Stream
-
-	// Run nmap command to discover open ports on the specified targets & ports
-	err := NmapRun(targets, ports, nmapResultPath, speed, log)
-	if err != nil {
-		return streams, err
-	}
-
-	// Get found streams from nmap results
-	streams, err = NmapParseResults(nmapResultPath)
-	if err != nil {
-		return streams, err
-	}
-
-	return streams, nil
-}

discover_test.go

@@ -1,812 +0,0 @@
-package cmrdr
-
-import (
-	"encoding/xml"
-	"fmt"
-	"io/ioutil"
-	"os"
-	"os/exec"
-	"strconv"
-	"testing"
-
-	"github.com/stretchr/testify/assert"
-)
-
-// HACK: See https://golang.org/src/os/exec/exec_test.go
-func fakeExecCommand(command string, args ...string) *exec.Cmd {
-	cs := []string{"-test.run=TestExecCommandHelper", "--", command}
-	cs = append(cs, args...)
-	cmd := exec.Command(os.Args[0], cs...)
-	cmd.Env = []string{"GO_WANT_HELPER_PROCESS=1",
-		"STDOUT= ",
-		"EXIT_STATUS=0"}
-	return cmd
-}
-
-func TestExecCommandHelper(t *testing.T) {
-	if os.Getenv("GO_WANT_HELPER_PROCESS") != "1" {
-		return
-	}
-
-	fmt.Fprintf(os.Stdout, os.Getenv("STDOUT"))
-	i, _ := strconv.Atoi(os.Getenv("EXIT_STATUS"))
-	os.Exit(i)
-}
-
-func TestNmapRun(t *testing.T) {
-	execCommand = fakeExecCommand
-	defer func() { execCommand = exec.Command }()
-
-	testCases := []struct {
-		targets        string
-		ports          string
-		resultFilePath string
-		nmapSpeed      int
-		enableLogs     bool
-
-		expectedErrMsg string
-	}{
-		// Valid baseline with logs enabled
-		{
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      PARANOIAC,
-			enableLogs:     true,
-		},
-		// Invalid speed
-		{
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      INSANE + 1,
-			enableLogs:     false,
-
-			expectedErrMsg: "invalid nmap speed value",
-		},
-	}
-	for _, test := range testCases {
-		err := NmapRun(test.targets, test.ports, test.resultFilePath, test.nmapSpeed, test.enableLogs)
-		if len(test.expectedErrMsg) > 0 {
-			if err == nil {
-				fmt.Printf("unexpected success. expected error: %s\n", test.expectedErrMsg)
-				os.Exit(1)
-			}
-			assert.Contains(t, err.Error(), test.expectedErrMsg, "wrong error message")
-		} else {
-			if err != nil {
-				fmt.Printf("unexpected error: %v\n", err)
-				os.Exit(1)
-			}
-		}
-	}
-}
-
-func TestNmapParseResults(t *testing.T) {
-	validStream1 := Stream{
-		Device:  "fakeDevice",
-		Address: "fakeAddress",
-		Port:    1337,
-	}
-
-	validStream2 := Stream{
-		Device:  "fakeDevice",
-		Address: "differentFakeAddress",
-		Port:    1337,
-	}
-
-	invalidStreamNoPort := Stream{
-		Device:  "invalidDevice",
-		Address: "fakeAddress",
-		Port:    0,
-	}
-
-	invalidStreamNoAddress := Stream{
-		Device:  "invalidDevice",
-		Address: "",
-		Port:    1337,
-	}
-
-	invalidStreamMACAddress := Stream{
-		Device:  "invalidDevice",
-		Address: "00:12:16:FB:02:17",
-		Port:    1337,
-	}
-
-	testCases := []struct {
-		fileExists bool
-		streamsXML *nmapResult
-
-		expectedStreams []Stream
-		expectedErrMsg  string
-	}{
-		// File exists
-		// Two valid streams, no error
-		{
-			expectedStreams: []Stream{validStream1, validStream2},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream1.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream1.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream1.Device,
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream2.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream2.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream2.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-			fileExists: true,
-		},
-		// File exists
-		// Invalid stream, only a mac address
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     invalidStreamMACAddress.Address,
-								AddrType: "mac",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: invalidStreamMACAddress.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: invalidStreamMACAddress.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-		},
-		// File exists
-		// Valid stream, an ipv4 address and a mac address
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{validStream1},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     invalidStreamMACAddress.Address,
-								AddrType: "mac",
-							},
-							address{
-								Addr:     validStream1.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream1.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream1.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-		},
-		// File exists
-		// Two invalid targets, no error
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{invalidStreamNoPort, invalidStreamNoAddress},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     invalidStreamNoAddress.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: invalidStreamNoAddress.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: invalidStreamNoAddress.Device,
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     invalidStreamNoPort.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: invalidStreamNoPort.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: invalidStreamNoPort.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-		},
-		// File does not exist, error
-		{
-			fileExists:     false,
-			expectedErrMsg: "could not read nmap result file",
-		},
-		// No valid streams found
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     "Camera with closed ports",
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: 0,
-									State: state{
-										State: "closed",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: "Camera without closed ports",
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     "Camera with closed ports",
-								AddrType: "ipv4",
-							},
-						},
-					},
-				},
-			},
-		},
-		// XML Unmarshal error
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{},
-			expectedErrMsg:  "expected element type <nmaprun> but have <failure>",
-		},
-	}
-	for i, test := range testCases {
-		filePath := "/tmp/cameradar_test_parse_results_" + fmt.Sprint(i) + ".xml"
-
-		// create file
-		if test.fileExists {
-			_, err := os.Create(filePath)
-			if err != nil {
-				fmt.Printf("could not create xml file for NmapParseResults: %v. iteration: %d. file path: %s\n", err, i, filePath)
-				os.Exit(1)
-			}
-
-			// marshal and write
-			if test.streamsXML != nil {
-				streams, err := xml.Marshal(test.streamsXML)
-				if err != nil {
-					fmt.Printf("invalid targets for NmapParseResults: %v. iteration: %d. streams: %v\n", err, i, test.streamsXML)
-					os.Exit(1)
-				}
-
-				err = ioutil.WriteFile(filePath, streams, 0644)
-				if err != nil {
-					fmt.Printf("could not write xml file for NmapParseResults: %v. iteration: %d. file path: %s\n", err, i, filePath)
-					os.Exit(1)
-				}
-			} else {
-				err := ioutil.WriteFile(filePath, []byte("<?xml version=\"1.0\" encoding=\"UTF-8\"?><failure>"), 0644)
-				if err != nil {
-					fmt.Printf("could not write xml file for NmapParseResults: %v. iteration: %d. file path: %s\n", err, i, filePath)
-					os.Exit(1)
-				}
-			}
-		}
-
-		results, err := NmapParseResults(filePath)
-		if len(test.expectedErrMsg) > 0 {
-			if err == nil {
-				fmt.Printf("unexpected success. expected error: %s\n", test.expectedErrMsg)
-				os.Exit(1)
-			}
-			assert.Contains(t, err.Error(), test.expectedErrMsg, "wrong error message")
-		} else {
-			if err != nil {
-				fmt.Printf("unexpected error: %v\n", err)
-				os.Exit(1)
-			}
-			for _, stream := range test.expectedStreams {
-				foundStream := false
-				for _, result := range results {
-					if result.Address == stream.Address && result.Device == stream.Device && result.Port == stream.Port {
-						foundStream = true
-					}
-				}
-				assert.Equal(t, true, foundStream, "wrong streams parsed")
-				if !foundStream {
-					fmt.Printf("%+v\n", results)
-				}
-			}
-		}
-		assert.Equal(t, len(test.expectedStreams), len(results), "wrong streams parsed")
-	}
-}
-
-func TestDiscover(t *testing.T) {
-	execCommand = fakeExecCommand
-	defer func() { execCommand = exec.Command }()
-
-	validStream1 := Stream{
-		Device:  "fakeDevice",
-		Address: "fakeAddress",
-		Port:    1337,
-	}
-
-	validStream2 := Stream{
-		Device:  "fakeDevice",
-		Address: "differentFakeAddress",
-		Port:    1337,
-	}
-
-	invalidStreamNoPort := Stream{
-		Device:  "invalidDevice",
-		Address: "fakeAddress",
-		Port:    0,
-	}
-
-	invalidStreamNoAddress := Stream{
-		Device:  "invalidDevice",
-		Address: "",
-		Port:    1337,
-	}
-
-	testCases := []struct {
-		targets        string
-		ports          string
-		resultFilePath string
-		nmapSpeed      int
-		enableLogs     bool
-		fileExists     bool
-		streamsXML     *nmapResult
-
-		expectedStreams []Stream
-		expectedErrMsg  string
-	}{
-		// Valid baseline
-		{
-			expectedStreams: []Stream{validStream1, validStream2},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream1.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream1.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream1.Device,
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream2.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream2.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream2.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-			fileExists:     true,
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      PARANOIAC,
-			enableLogs:     false,
-		},
-		// Invalid speed
-		{
-			expectedStreams: []Stream{},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream1.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream1.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream1.Device,
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream2.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream2.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream2.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-			fileExists:     true,
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      INSANE + 1,
-			enableLogs:     false,
-
-			expectedErrMsg: "invalid nmap speed value",
-		},
-		// File exists
-		// Two valid streams, no error
-		{
-			expectedStreams: []Stream{validStream1, validStream2},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream1.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream1.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream1.Device,
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     validStream2.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: validStream2.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: validStream2.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-			fileExists:     true,
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      PARANOIAC,
-			enableLogs:     false,
-		},
-		// File exists
-		// Two invalid targets, no error
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{invalidStreamNoPort, invalidStreamNoAddress},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     invalidStreamNoAddress.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: invalidStreamNoAddress.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: invalidStreamNoAddress.Device,
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     invalidStreamNoPort.Address,
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: invalidStreamNoPort.Port,
-									State: state{
-										State: "open",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: invalidStreamNoPort.Device,
-									},
-								},
-							},
-						},
-					},
-				},
-			},
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      PARANOIAC,
-			enableLogs:     false,
-		},
-		// File does not exist, error
-		{
-			fileExists:     false,
-			expectedErrMsg: "could not read nmap result file",
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      PARANOIAC,
-			enableLogs:     false,
-		},
-		// No valid streams found
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{},
-			streamsXML: &nmapResult{
-				Hosts: []host{
-					{
-						Addresses: []address{
-							address{
-								Addr:     "Camera with closed ports",
-								AddrType: "ipv4",
-							},
-						},
-						Ports: ports{
-							Ports: []port{
-								{
-									PortID: 0,
-									State: state{
-										State: "closed",
-									},
-									Service: service{
-										Name:    "rtsp",
-										Product: "Camera without closed ports",
-									},
-								},
-							},
-						},
-					},
-					{
-						Addresses: []address{
-							address{
-								Addr:     "Camera with closed ports",
-								AddrType: "ipv4",
-							},
-						},
-					},
-				},
-			},
-			targets:        "localhost",
-			ports:          "554",
-			resultFilePath: "/tmp/results.xml",
-			nmapSpeed:      PARANOIAC,
-			enableLogs:     false,
-		},
-		// XML Unmarshal error
-		{
-			fileExists:      true,
-			expectedStreams: []Stream{},
-			expectedErrMsg:  "expected element type <nmaprun> but have <failure>",
-			targets:         "localhost",
-			ports:           "554",
-			resultFilePath:  "/tmp/results.xml",
-			nmapSpeed:       PARANOIAC,
-			enableLogs:      false,
-		},
-	}
-	for i, test := range testCases {
-		filePath := "/tmp/cameradar_test_discover_" + fmt.Sprint(i) + ".xml"
-
-		// create file
-		if test.fileExists {
-			_, err := os.Create(filePath)
-			if err != nil {
-				fmt.Printf("could not create xml file for Discover: %v. iteration: %d. file path: %s\n", err, i, filePath)
-				os.Exit(1)
-			}
-
-			// marshal and write
-			if test.streamsXML != nil {
-				streams, err := xml.Marshal(test.streamsXML)
-				if err != nil {
-					fmt.Printf("invalid targets for Discover: %v. iteration: %d. streams: %v\n", err, i, test.streamsXML)
-					os.Exit(1)
-				}
-
-				err = ioutil.WriteFile(filePath, streams, 0644)
-				if err != nil {
-					fmt.Printf("could not write xml file for Discover: %v. iteration: %d. file path: %s\n", err, i, filePath)
-					os.Exit(1)
-				}
-			} else {
-				err := ioutil.WriteFile(filePath, []byte("<?xml version=\"1.0\" encoding=\"UTF-8\"?><failure>"), 0644)
-				if err != nil {
-					fmt.Printf("could not write xml file for Discover: %v. iteration: %d. file path: %s\n", err, i, filePath)
-					os.Exit(1)
-				}
-			}
-		}
-
-		results, err := Discover(test.targets, test.ports, filePath, test.nmapSpeed, test.enableLogs)
-
-		if len(test.expectedErrMsg) > 0 {
-			if err == nil {
-				fmt.Printf("unexpected success in Discover test, iteration %d. expected error: %s\n", i, test.expectedErrMsg)
-				os.Exit(1)
-			}
-			assert.Contains(t, err.Error(), test.expectedErrMsg, "wrong error message")
-		} else {
-			if err != nil {
-				fmt.Printf("unexpected error in Discover test, iteration %d: %v\n", i, err)
-				os.Exit(1)
-			}
-			for _, stream := range test.expectedStreams {
-				foundStream := false
-				for _, result := range results {
-					if result.Address == stream.Address && result.Device == stream.Device && result.Port == stream.Port {
-						foundStream = true
-					}
-				}
-				assert.Equal(t, true, foundStream, "wrong streams parsed")
-			}
-		}
-		assert.Equal(t, len(test.expectedStreams), len(results), "wrong streams parsed")
-	}
-}

go.mod

@@ -0,0 +1,17 @@
+module github.com/Ullaakut/cameradar/v5
+
+go 1.14
+
+require (
+	github.com/PuerkitoBio/goquery v1.5.0
+	github.com/Ullaakut/disgo v0.3.1
+	github.com/Ullaakut/go-curl v0.0.0-20190525093431-597e157bbffd
+	github.com/Ullaakut/nmap v2.0.0+incompatible
+	github.com/VividCortex/ewma v1.1.1 // indirect
+	github.com/fatih/color v1.7.0 // indirect
+	github.com/mattn/go-colorable v0.1.2 // indirect
+	github.com/spf13/pflag v1.0.3
+	github.com/spf13/viper v1.4.0
+	github.com/stretchr/testify v1.2.2
+	github.com/vbauerster/mpb v3.4.0+incompatible
+)

go.sum

@@ -0,0 +1,163 @@
+cloud.google.com/go v0.26.0/go.mod h1:aQUYkXzVsufM+DwF1aE+0xfcU+56JwCaLick0ClmMTw=
+github.com/BurntSushi/toml v0.3.1 h1:WXkYYl6Yr3qBf1K79EBnL4mak0OimBfB0XUf9Vl28OQ=
+github.com/BurntSushi/toml v0.3.1/go.mod h1:xHWCNGjB5oqiDr8zfno3MHue2Ht5sIBksp03qcyfWMU=
+github.com/OneOfOne/xxhash v1.2.2/go.mod h1:HSdplMjZKSmBqAxg5vPj2TmRDmfkzw+cTzAElWljhcU=
+github.com/PuerkitoBio/goquery v1.5.0 h1:uGvmFXOA73IKluu/F84Xd1tt/z07GYm8X49XKHP7EJk=
+github.com/PuerkitoBio/goquery v1.5.0/go.mod h1:qD2PgZ9lccMbQlc7eEOjaeRlFQON7xY8kdmcsrnKqMg=
+github.com/Ullaakut/disgo v0.3.1 h1:BGGVHynji41KGuGI02ztTCnILRvyzlvmiCRl5bBpjKk=
+github.com/Ullaakut/disgo v0.3.1/go.mod h1:/CSvpnYVSKOeh2dvUvx9cXshzz2t7T1/lRO/MrFj3fI=
+github.com/Ullaakut/go-curl v0.0.0-20190525093431-597e157bbffd h1:CMe+dX1CL4pCXNytxIB2U1qp0xZObGMZosJhaQdUlUo=
+github.com/Ullaakut/go-curl v0.0.0-20190525093431-597e157bbffd/go.mod h1:u8mVgpDT88IPIt1B+Tu8vkrcFfBKGcfGwS9I7wmvMh0=
+github.com/Ullaakut/nmap v2.0.0+incompatible h1:tNXub052dsnG8+yrgpph9nhVixIBdpRRgzvmQoc8eBA=
+github.com/Ullaakut/nmap v2.0.0+incompatible/go.mod h1:fkC066hwfcoKwlI7DS2ARTggSVtBTZYCjVH1TzuTMaQ=
+github.com/VividCortex/ewma v1.1.1 h1:MnEK4VOv6n0RSY4vtRe3h11qjxL3+t0B8yOL8iMXdcM=
+github.com/VividCortex/ewma v1.1.1/go.mod h1:2Tkkvm3sRDVXaiyucHiACn4cqf7DpdyLvmxzcbUokwA=
+github.com/alecthomas/template v0.0.0-20160405071501-a0175ee3bccc/go.mod h1:LOuyumcjzFXgccqObfd/Ljyb9UuFJ6TxHnclSeseNhc=
+github.com/alecthomas/units v0.0.0-20151022065526-2efee857e7cf/go.mod h1:ybxpYRFXyAe+OPACYpWeL0wqObRcbAqCMya13uyzqw0=
+github.com/andybalholm/cascadia v1.0.0 h1:hOCXnnZ5A+3eVDX8pvgl4kofXv2ELss0bKcqRySc45o=
+github.com/andybalholm/cascadia v1.0.0/go.mod h1:GsXiBklL0woXo1j/WYWtSYYC4ouU9PqHO0sqidkEA4Y=
+github.com/armon/consul-api v0.0.0-20180202201655-eb2c6b5be1b6/go.mod h1:grANhF5doyWs3UAsr3K4I6qtAmlQcZDesFNEHPZAzj8=
+github.com/beorn7/perks v0.0.0-20180321164747-3a771d992973/go.mod h1:Dwedo/Wpr24TaqPxmxbtue+5NUziq4I4S80YR8gNf3Q=
+github.com/beorn7/perks v1.0.0/go.mod h1:KWe93zE9D1o94FZ5RNwFwVgaQK1VOXiVxmqh+CedLV8=
+github.com/cespare/xxhash v1.1.0/go.mod h1:XrSqR1VqqWfGrhpAt58auRo0WTKS1nRRg3ghfAqPWnc=
+github.com/client9/misspell v0.3.4/go.mod h1:qj6jICC3Q7zFZvVWo7KLAzC3yx5G7kyvSDkc90ppPyw=
+github.com/coreos/bbolt v1.3.2/go.mod h1:iRUV2dpdMOn7Bo10OQBFzIJO9kkE559Wcmn+qkEiiKk=
+github.com/coreos/etcd v3.3.10+incompatible/go.mod h1:uF7uidLiAD3TWHmW31ZFd/JWoc32PjwdhPthX9715RE=
+github.com/coreos/go-semver v0.2.0/go.mod h1:nnelYz7RCh+5ahJtPPxZlU+153eP4D4r3EedlOD2RNk=
+github.com/coreos/go-systemd v0.0.0-20190321100706-95778dfbb74e/go.mod h1:F5haX7vjVVG0kc13fIWeqUViNPyEJxv/OmvnBo0Yme4=
+github.com/coreos/pkg v0.0.0-20180928190104-399ea9e2e55f/go.mod h1:E3G3o1h8I7cfcXa63jLwjI0eiQQMgzzUDFVpN/nH/eA=
+github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
+github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/dgrijalva/jwt-go v3.2.0+incompatible/go.mod h1:E3ru+11k8xSBh+hMPgOLZmtrrCbhqsmaPHjLKYnJCaQ=
+github.com/dgryski/go-sip13 v0.0.0-20181026042036-e10d5fee7954/go.mod h1:vAd38F8PWV+bWy6jNmig1y/TA+kYO4g3RSRF0IAv0no=
+github.com/fatih/color v1.7.0 h1:DkWD4oS2D8LGGgTQ6IvwJJXSL5Vp2ffcQg58nFV38Ys=
+github.com/fatih/color v1.7.0/go.mod h1:Zm6kSWBoL9eyXnKyktHP6abPY2pDugNf5KwzbycvMj4=
+github.com/fsnotify/fsnotify v1.4.7 h1:IXs+QLmnXW2CcXuY+8Mzv/fWEsPGWxqefPtCP5CnV9I=
+github.com/fsnotify/fsnotify v1.4.7/go.mod h1:jwhsz4b93w/PPRr/qN1Yymfu8t87LnFCMoQvtojpjFo=
+github.com/ghodss/yaml v1.0.0/go.mod h1:4dBDuWmgqj2HViK6kFavaiC9ZROes6MMH2rRYeMEF04=
+github.com/go-kit/kit v0.8.0/go.mod h1:xBxKIO96dXMWWy0MnWVtmwkA9/13aqxPnvrjFYMA2as=
+github.com/go-logfmt/logfmt v0.3.0/go.mod h1:Qt1PoO58o5twSAckw1HlFXLmHsOX5/0LbT9GBnD5lWE=
+github.com/go-logfmt/logfmt v0.4.0/go.mod h1:3RMwSq7FuexP4Kalkev3ejPJsZTpXXBr9+V4qmtdjCk=
+github.com/go-stack/stack v1.8.0/go.mod h1:v0f6uXyyMGvRgIKkXu+yp6POWl0qKG85gN/melR3HDY=
+github.com/gogo/protobuf v1.1.1/go.mod h1:r8qH/GZQm5c6nD/R0oafs1akxWv10x8SbQlK7atdtwQ=
+github.com/gogo/protobuf v1.2.1/go.mod h1:hp+jE20tsWTFYpLwKvXlhS1hjn+gTNwPg2I6zVXpSg4=
+github.com/golang/glog v0.0.0-20160126235308-23def4e6c14b/go.mod h1:SBH7ygxi8pfUlaOkMMuAQtPIUF8ecWP5IEl/CR7VP2Q=
+github.com/golang/groupcache v0.0.0-20190129154638-5b532d6fd5ef/go.mod h1:cIg4eruTrX1D+g88fzRXU5OdNfaM+9IcxsU14FzY7Hc=
+github.com/golang/mock v1.1.1/go.mod h1:oTYuIxOrZwtPieC+H1uAHpcLFnEyAGVDL/k47Jfbm0A=
+github.com/golang/protobuf v1.2.0/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
+github.com/golang/protobuf v1.3.1/go.mod h1:6lQm79b+lXiMfvg/cZm0SGofjICqVBUtrP5yJMmIC1U=
+github.com/google/btree v1.0.0/go.mod h1:lNA+9X1NB3Zf8V7Ke586lFgjr2dZNuvo3lPJSGZ5JPQ=
+github.com/google/go-cmp v0.2.0/go.mod h1:oXzfMopK8JAjlY9xF4vHSVASa0yLyX7SntLO5aqRK0M=
+github.com/gorilla/websocket v1.4.0/go.mod h1:E7qHFY5m1UJ88s3WnNqhKjPHQ0heANvMoAMk2YaljkQ=
+github.com/grpc-ecosystem/go-grpc-middleware v1.0.0/go.mod h1:FiyG127CGDf3tlThmgyCl78X/SZQqEOJBCDaAfeWzPs=
+github.com/grpc-ecosystem/go-grpc-prometheus v1.2.0/go.mod h1:8NvIoxWQoOIhqOTXgfV/d3M/q6VIi02HzZEHgUlZvzk=
+github.com/grpc-ecosystem/grpc-gateway v1.9.0/go.mod h1:vNeuVxBJEsws4ogUvrchl83t/GYV9WGTSLVdBhOQFDY=
+github.com/hashicorp/hcl v1.0.0 h1:0Anlzjpi4vEasTeNFn2mLJgTSwt0+6sfsiTG8qcWGx4=
+github.com/hashicorp/hcl v1.0.0/go.mod h1:E5yfLk+7swimpb2L/Alb/PJmXilQ/rhwaUYs4T20WEQ=
+github.com/jonboulle/clockwork v0.1.0/go.mod h1:Ii8DK3G1RaLaWxj9trq07+26W01tbo22gdxWY5EU2bo=
+github.com/julienschmidt/httprouter v1.2.0/go.mod h1:SYymIcj16QtmaHHD7aYtjjsJG7VTCxuUUipMqKk8s4w=
+github.com/kisielk/errcheck v1.1.0/go.mod h1:EZBBE59ingxPouuu3KfxchcWSUPOHkagtvWXihfKN4Q=
+github.com/kisielk/gotool v1.0.0/go.mod h1:XhKaO+MFFWcvkIS/tQcRk01m1F5IRFswLeQ+oQHNcck=
+github.com/konsorten/go-windows-terminal-sequences v1.0.1/go.mod h1:T0+1ngSBFLxvqU3pZ+m/2kptfBszLMUkC4ZK/EgS/cQ=
+github.com/kr/logfmt v0.0.0-20140226030751-b84e30acd515/go.mod h1:+0opPa2QZZtGFBFZlji/RkVcI2GknAs/DXo4wKdlNEc=
+github.com/kr/pretty v0.1.0 h1:L/CwN0zerZDmRFUapSPitk6f+Q3+0za1rQkzVuMiMFI=
+github.com/kr/pretty v0.1.0/go.mod h1:dAy3ld7l9f0ibDNOQOHHMYYIIbhfbHSm3C4ZsoJORNo=
+github.com/kr/pty v1.1.1/go.mod h1:pFQYn66WHrOpPYNljwOMqo10TkYh1fy3cYio2l3bCsQ=
+github.com/kr/text v0.1.0 h1:45sCR5RtlFHMR4UwH9sdQ5TC8v0qDQCHnXt+kaKSTVE=
+github.com/kr/text v0.1.0/go.mod h1:4Jbv+DJW3UT/LiOwJeYQe1efqtUx/iVham/4vfdArNI=
+github.com/magiconair/properties v1.8.0 h1:LLgXmsheXeRoUOBOjtwPQCWIYqM/LU1ayDtDePerRcY=
+github.com/magiconair/properties v1.8.0/go.mod h1:PppfXfuXeibc/6YijjN8zIbojt8czPbwD3XqdrwzmxQ=
+github.com/mattn/go-colorable v0.1.2 h1:/bC9yWikZXAL9uJdulbSfyVNIR3n3trXl+v8+1sx8mU=
+github.com/mattn/go-colorable v0.1.2/go.mod h1:U0ppj6V5qS13XJ6of8GYAs25YV2eR4EVcfRqFIhoBtE=
+github.com/mattn/go-isatty v0.0.8 h1:HLtExJ+uU2HOZ+wI0Tt5DtUDrx8yhUqDcp7fYERX4CE=
+github.com/mattn/go-isatty v0.0.8/go.mod h1:Iq45c/XA43vh69/j3iqttzPXn0bhXyGjM0Hdxcsrc5s=
+github.com/matttproud/golang_protobuf_extensions v1.0.1/go.mod h1:D8He9yQNgCq6Z5Ld7szi9bcBfOoFv/3dc6xSMkL2PC0=
+github.com/mitchellh/mapstructure v1.1.2 h1:fmNYVwqnSfB9mZU6OS2O6GsXM+wcskZDuKQzvN1EDeE=
+github.com/mitchellh/mapstructure v1.1.2/go.mod h1:FVVH3fgwuzCH5S8UJGiWEs2h04kUh9fWfEaFds41c1Y=
+github.com/mwitkow/go-conntrack v0.0.0-20161129095857-cc309e4a2223/go.mod h1:qRWi+5nqEBWmkhHvq77mSJWrCKwh8bxhgT7d/eI7P4U=
+github.com/oklog/ulid v1.3.1/go.mod h1:CirwcVhetQ6Lv90oh/F+FBtV6XMibvdAFo93nm5qn4U=
+github.com/pelletier/go-toml v1.2.0 h1:T5zMGML61Wp+FlcbWjRDT7yAxhJNAiPPLOFECq181zc=
+github.com/pelletier/go-toml v1.2.0/go.mod h1:5z9KED0ma1S8pY6P1sdut58dfprrGBbd/94hg7ilaic=
+github.com/pkg/errors v0.8.0/go.mod h1:bwawxfHBFNV+L2hUp1rHADufV3IMtnDRdf1r5NINEl0=
+github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
+github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
+github.com/prometheus/client_golang v0.9.1/go.mod h1:7SWBe2y4D6OKWSNQJUaRYU/AaXPKyh/dDVn+NZz0KFw=
+github.com/prometheus/client_golang v0.9.3/go.mod h1:/TN21ttK/J9q6uSwhBd54HahCDft0ttaMvbicHlPoso=
+github.com/prometheus/client_model v0.0.0-20180712105110-5c3871d89910/go.mod h1:MbSGuTsp3dbXC40dX6PRTWyKYBIrTGTE9sqQNg2J8bo=
+github.com/prometheus/client_model v0.0.0-20190129233127-fd36f4220a90/go.mod h1:xMI15A0UPsDsEKsMN9yxemIoYk6Tm2C1GtYGdfGttqA=
+github.com/prometheus/common v0.0.0-20181113130724-41aa239b4cce/go.mod h1:daVV7qP5qjZbuso7PdcryaAu0sAZbrN9i7WWcTMWvro=
+github.com/prometheus/common v0.4.0/go.mod h1:TNfzLD0ON7rHzMJeJkieUDPYmFC7Snx/y86RQel1bk4=
+github.com/prometheus/procfs v0.0.0-20181005140218-185b4288413d/go.mod h1:c3At6R/oaqEKCNdg8wHV1ftS6bRYblBhIjjI8uT2IGk=
+github.com/prometheus/procfs v0.0.0-20190507164030-5867b95ac084/go.mod h1:TjEm7ze935MbeOT/UhFTIMYKhuLP4wbCsTZCD3I8kEA=
+github.com/prometheus/tsdb v0.7.1/go.mod h1:qhTCs0VvXwvX/y3TZrWD7rabWM+ijKTux40TwIPHuXU=
+github.com/rogpeppe/fastuuid v0.0.0-20150106093220-6724a57986af/go.mod h1:XWv6SoW27p1b0cqNHllgS5HIMJraePCO15w5zCzIWYg=
+github.com/sirupsen/logrus v1.2.0/go.mod h1:LxeOpSwHxABJmUn/MG1IvRgCAasNZTLOkJPxbbu5VWo=
+github.com/soheilhy/cmux v0.1.4/go.mod h1:IM3LyeVVIOuxMH7sFAkER9+bJ4dT7Ms6E4xg4kGIyLM=
+github.com/spaolacci/murmur3 v0.0.0-20180118202830-f09979ecbc72/go.mod h1:JwIasOWyU6f++ZhiEuf87xNszmSA2myDM2Kzu9HwQUA=
+github.com/spf13/afero v1.1.2 h1:m8/z1t7/fwjysjQRYbP0RD+bUIF/8tJwPdEZsI83ACI=
+github.com/spf13/afero v1.1.2/go.mod h1:j4pytiNVoe2o6bmDsKpLACNPDBIoEAkihy7loJ1B0CQ=
+github.com/spf13/cast v1.3.0 h1:oget//CVOEoFewqQxwr0Ej5yjygnqGkvggSE/gB35Q8=
+github.com/spf13/cast v1.3.0/go.mod h1:Qx5cxh0v+4UWYiBimWS+eyWzqEqokIECu5etghLkUJE=
+github.com/spf13/jwalterweatherman v1.0.0 h1:XHEdyB+EcvlqZamSM4ZOMGlc93t6AcsBEu9Gc1vn7yk=
+github.com/spf13/jwalterweatherman v1.0.0/go.mod h1:cQK4TGJAtQXfYWX+Ddv3mKDzgVb68N+wFjFa4jdeBTo=
+github.com/spf13/pflag v1.0.3 h1:zPAT6CGy6wXeQ7NtTnaTerfKOsV6V6F8agHXFiazDkg=
+github.com/spf13/pflag v1.0.3/go.mod h1:DYY7MBk1bdzusC3SYhjObp+wFpr4gzcvqqNjLnInEg4=
+github.com/spf13/viper v1.4.0 h1:yXHLWeravcrgGyFSyCgdYpXQ9dR9c/WED3pg1RhxqEU=
+github.com/spf13/viper v1.4.0/go.mod h1:PTJ7Z/lr49W6bUbkmS1V3by4uWynFiR9p7+dSq/yZzE=
+github.com/stretchr/objx v0.1.1 h1:2vfRuCMp5sSVIDSqO8oNnWJq7mPa6KVP3iPIwFBuy8A=
+github.com/stretchr/objx v0.1.1/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
+github.com/stretchr/testify v1.2.2 h1:bSDNvY7ZPG5RlJ8otE/7V6gMiyenm9RtJ7IUVIAoJ1w=
+github.com/stretchr/testify v1.2.2/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs=
+github.com/tmc/grpc-websocket-proxy v0.0.0-20190109142713-0ad062ec5ee5/go.mod h1:ncp9v5uamzpCO7NfCPTXjqaC+bZgJeR0sMTm6dMHP7U=
+github.com/ugorji/go v1.1.4/go.mod h1:uQMGLiO92mf5W77hV/PUCpI3pbzQx3CRekS0kk+RGrc=
+github.com/vbauerster/mpb v3.4.0+incompatible h1:mfiiYw87ARaeRW6x5gWwYRUawxaW1tLAD8IceomUCNw=
+github.com/vbauerster/mpb v3.4.0+incompatible/go.mod h1:zAHG26FUhVKETRu+MWqYXcI70POlC6N8up9p1dID7SU=
+github.com/xiang90/probing v0.0.0-20190116061207-43a291ad63a2/go.mod h1:UETIi67q53MR2AWcXfiuqkDkRtnGDLqkBTpCHuJHxtU=
+github.com/xordataexchange/crypt v0.0.3-0.20170626215501-b2862e3d0a77/go.mod h1:aYKd//L2LvnjZzWKhF00oedf4jCCReLcmhLdhm1A27Q=
+go.etcd.io/bbolt v1.3.2/go.mod h1:IbVyRI1SCnLcuJnV2u8VeU0CEYM7e686BmAb1XKL+uU=
+go.uber.org/atomic v1.4.0/go.mod h1:gD2HeocX3+yG+ygLZcrzQJaqmWj9AIm7n08wl/qW/PE=
+go.uber.org/multierr v1.1.0/go.mod h1:wR5kodmAFQ0UK8QlbwjlSNy0Z68gJhDJUG5sjR94q/0=
+go.uber.org/zap v1.10.0/go.mod h1:vwi/ZaCAaUcBkycHslxD9B2zi4UTXhF60s6SWpuDF0Q=
+golang.org/x/crypto v0.0.0-20180904163835-0709b304e793/go.mod h1:6SG95UA2DQfeDnfUPMdvaQW0Q7yPrPDi9nlGo2tz2b4=
+golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2 h1:VklqNMn3ovrHsnt90PveolxSbWFaJdECFbxSq0Mqo2M=
+golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w=
+golang.org/x/lint v0.0.0-20181026193005-c67002cb31c3/go.mod h1:UVdnD1Gm6xHRNCYTkRU2/jEulfH38KcIWyp/GAMgvoE=
+golang.org/x/lint v0.0.0-20190313153728-d0100b6bd8b3/go.mod h1:6SW0HCj/g11FgYtHlgUYUwCkIfeOF89ocIRzGO/8vkc=
+golang.org/x/net v0.0.0-20180218175443-cbe0f9307d01/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
+golang.org/x/net v0.0.0-20180826012351-8a410e7b638d/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
+golang.org/x/net v0.0.0-20181114220301-adae6a3d119a/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
+golang.org/x/net v0.0.0-20181220203305-927f97764cc3/go.mod h1:mL1N/T3taQHkDXs73rZJwtUhF3w3ftmwwsq0BUmARs4=
+golang.org/x/net v0.0.0-20190311183353-d8887717615a/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg=
+golang.org/x/net v0.0.0-20190522155817-f3200d17e092 h1:4QSRKanuywn15aTZvI/mIDEgPQpswuFndXpOj3rKEco=
+golang.org/x/net v0.0.0-20190522155817-f3200d17e092/go.mod h1:HSz+uSET+XFnRR8LxR5pz3Of3rY3CfYBVs4xY44aLks=
+golang.org/x/oauth2 v0.0.0-20180821212333-d2e6202438be/go.mod h1:N/0e6XlmueqKjAGxoOufVs8QHGRruUQn6yWY3a++T0U=
+golang.org/x/sync v0.0.0-20180314180146-1d60e4601c6f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sync v0.0.0-20181108010431-42b317875d0f/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sync v0.0.0-20181221193216-37e7f081c4d4/go.mod h1:RxMgew5VJxzue5/jJTE5uejpjVlOe/izrB70Jof72aM=
+golang.org/x/sys v0.0.0-20180830151530-49385e6e1522/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/sys v0.0.0-20180905080454-ebe1bf3edb33/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/sys v0.0.0-20181107165924-66b7b1311ac8/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/sys v0.0.0-20181116152217-5ac8a444bdc5/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/sys v0.0.0-20190222072716-a9d3bda3a223 h1:DH4skfRX4EBpamg7iV4ZlCpblAHI6s6TDM39bFZumv8=
+golang.org/x/sys v0.0.0-20190222072716-a9d3bda3a223/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
+golang.org/x/text v0.3.0 h1:g61tztE5qeGQ89tm6NTjjM9VPIm088od1l6aSorWRWg=
+golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ=
+golang.org/x/time v0.0.0-20190308202827-9d24e82272b4/go.mod h1:tRJNPiyCQ0inRvYxbN9jk5I+vvW/OXSQhTDSoE431IQ=
+golang.org/x/tools v0.0.0-20180221164845-07fd8470d635/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
+golang.org/x/tools v0.0.0-20190114222345-bf090417da8b/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
+golang.org/x/tools v0.0.0-20190311212946-11955173bddd/go.mod h1:LCzVGOaR6xXOjkQ3onu1FJEFr0SW1gC7cKk1uF8kGRs=
+google.golang.org/appengine v1.1.0/go.mod h1:EbEs0AVv82hx2wNQdGPgUI5lhzA/G0D9YwlJXL52JkM=
+google.golang.org/genproto v0.0.0-20180817151627-c66870c02cf8/go.mod h1:JiN7NxoALGmiZfu7CAH4rXhgtRTLTxftemlI0sWmxmc=
+google.golang.org/grpc v1.19.0/go.mod h1:mqu4LbDTu4XGKhr4mRzUsmM4RtVoemTSY81AxZiDr8c=
+google.golang.org/grpc v1.21.0/go.mod h1:oYelfM1adQP15Ek0mdvEgi9Df8B9CZIaU1084ijfRaM=
+gopkg.in/alecthomas/kingpin.v2 v2.2.6/go.mod h1:FMv+mEhP44yOT+4EoQTLFTRgOQ1FBLkstjWtayDeSgw=
+gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/check.v1 v1.0.0-20180628173108-788fd7840127 h1:qIbj1fsPNlZgppZ+VLlY7N33q108Sa+fhmuc+sWQYwY=
+gopkg.in/check.v1 v1.0.0-20180628173108-788fd7840127/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/resty.v1 v1.12.0/go.mod h1:mDo4pnntr5jdWRML875a/NmxYqAlA73dVijT2AXvQQo=
+gopkg.in/yaml.v2 v2.0.0-20170812160011-eb3733d160e7/go.mod h1:JAlM8MvJe8wmxCU4Bli9HhUf9+ttbYbLASfIpnQbh74=
+gopkg.in/yaml.v2 v2.2.1/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
+gopkg.in/yaml.v2 v2.2.2 h1:ZCJp+EgiOT7lHqUV2J862kp8Qj64Jo6az82+3Td9dZw=
+gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
+honnef.co/go/tools v0.0.0-20190102054323-c2f93a96b099/go.mod h1:rf3lG4BRIbNafJWhAfAdb/ePZxsR/4RtNHQocxwk9r4=

helpers.go

@@ -1,9 +1,9 @@
-package cmrdr
+package cameradar
 
 import "fmt"
 
 func replace(streams []Stream, new Stream) []Stream {
-	updatedSlice := streams[:0]
+	var updatedSlice []Stream
 
 	for _, old := range streams {
 		if old.Address == new.Address && old.Port == new.Port {
@@ -12,15 +12,16 @@ func replace(streams []Stream, new Stream) []Stream {
 			updatedSlice = append(updatedSlice, old)
 		}
 	}
+
 	return updatedSlice
 }
 
-// GetCameraRTSPURL generates a stream's RTSP URL
+// GetCameraRTSPURL generates a stream's RTSP URL.
 func GetCameraRTSPURL(stream Stream) string {
-	return "rtsp://" + stream.Username + ":" + stream.Password + "@" + stream.Address + ":" + fmt.Sprint(stream.Port) + "/" + stream.Route
+	return "rtsp://" + stream.Username + ":" + stream.Password + "@" + stream.Address + ":" + fmt.Sprint(stream.Port) + "/" + stream.Route()
 }
 
-// GetCameraAdminPanelURL returns the URL to the camera's admin panel
+// GetCameraAdminPanelURL returns the URL to the camera's admin panel.
 func GetCameraAdminPanelURL(stream Stream) string {
 	return "http://" + stream.Address + "/"
 }

helpers_test.go

@@ -1,4 +1,4 @@
-package cmrdr
+package cameradar
 
 import (
 	"testing"
@@ -10,25 +10,25 @@ func TestReplace(t *testing.T) {
 	validStream1 := Stream{
 		Device:  "fakeDevice",
 		Address: "fakeAddress",
-		Port:    1337,
+		Port:    1,
 	}
 
 	validStream2 := Stream{
 		Device:  "fakeDevice",
 		Address: "differentFakeAddress",
-		Port:    1337,
+		Port:    2,
 	}
 
-	invalidStreamNoPort := Stream{
+	invalidStream := Stream{
 		Device:  "invalidDevice",
-		Address: "fakeAddress",
-		Port:    0,
+		Address: "anotherFakeAddress",
+		Port:    3,
 	}
 
-	invalidStreamNoPortModified := Stream{
+	invalidStreamModified := Stream{
 		Device:  "updatedDevice",
-		Address: "fakeAddress",
-		Port:    1337,
+		Address: "anotherFakeAddress",
+		Port:    3,
 	}
 
 	testCases := []struct {
@@ -37,25 +37,21 @@ func TestReplace(t *testing.T) {
 
 		expectedStreams []Stream
 	}{
-		// Valid baseline
 		{
-			streams:   []Stream{validStream1, validStream2, invalidStreamNoPort},
-			newStream: invalidStreamNoPortModified,
+			streams:   []Stream{validStream1, validStream2, invalidStream},
+			newStream: invalidStreamModified,
 
-			expectedStreams: []Stream{validStream1, validStream2, invalidStreamNoPortModified},
+			expectedStreams: []Stream{validStream1, validStream2, invalidStreamModified},
 		},
 	}
+
 	for _, test := range testCases {
 		streams := replace(test.streams, test.newStream)
 
-		for _, stream := range test.streams {
-			foundStream := false
-			for _, result := range streams {
-				if result.Address == stream.Address && result.Device == stream.Device && result.Port == stream.Port {
-					foundStream = true
-				}
-			}
-			assert.Equal(t, true, foundStream, "wrong streams parsed")
+		assert.Equal(t, len(test.expectedStreams), len(streams))
+
+		for _, expectedStream := range test.expectedStreams {
+			assert.Contains(t, streams, expectedStream)
 		}
 	}
 }
@@ -65,7 +61,7 @@ func TestGetCameraRTSPURL(t *testing.T) {
 		Address:  "1.2.3.4",
 		Username: "ullaakut",
 		Password: "ba69897483886f0d2b0afb6345b76c0c",
-		Route:    "cameradar.sdp",
+		Routes:   []string{"cameradar.sdp"},
 		Port:     1337,
 	}
 
@@ -74,16 +70,15 @@ func TestGetCameraRTSPURL(t *testing.T) {
 
 		expectedRTSPURL string
 	}{
-		// Valid baseline
 		{
 			stream: validStream,
 
 			expectedRTSPURL: "rtsp://ullaakut:ba69897483886f0d2b0afb6345b76c0c@1.2.3.4:1337/cameradar.sdp",
 		},
 	}
+
 	for _, test := range testCases {
-		output := GetCameraRTSPURL(test.stream)
-		assert.Equal(t, test.expectedRTSPURL, output, "wrong RTSP URL generated")
+		assert.Equal(t, test.expectedRTSPURL, GetCameraRTSPURL(test.stream))
 	}
 }
 
@@ -97,15 +92,14 @@ func TestGetCameraAdminPanelURL(t *testing.T) {
 
 		expectedRTSPURL string
 	}{
-		// Valid baseline
 		{
 			stream: validStream,
 
 			expectedRTSPURL: "http://1.2.3.4/",
 		},
 	}
+
 	for _, test := range testCases {
-		output := GetCameraAdminPanelURL(test.stream)
-		assert.Equal(t, test.expectedRTSPURL, output, "wrong Admin Panel URL generated")
+		assert.Equal(t, test.expectedRTSPURL, GetCameraAdminPanelURL(test.stream))
 	}
 }

loaders.go

@@ -1,14 +1,13 @@
-package cmrdr
+package cameradar
 
 import (
 	"bufio"
 	"encoding/json"
+	"fmt"
 	"io"
 	"io/ioutil"
 	"os"
 	"strings"
-
-	"github.com/pkg/errors"
 )
 
 var fs fileSystem = osFS{}
@@ -32,47 +31,51 @@ type osFS struct{}
 func (osFS) Open(name string) (file, error)        { return os.Open(name) }
 func (osFS) Stat(name string) (os.FileInfo, error) { return os.Stat(name) }
 
-// LoadCredentials opens a dictionary file and returns its contents as a Credentials structure
-func LoadCredentials(path string) (Credentials, error) {
-	var creds Credentials
+// LoadCredentials opens a dictionary file and returns its contents as a Credentials structure.
+func (s *Scanner) LoadCredentials() error {
+	s.term.Debugf("Loading credentials dictionary from path %q\n", s.credentialDictionaryPath)
 
-	// Open & Read XML file
-	content, err := ioutil.ReadFile(path)
+	// Open & Read XML file.
+	content, err := ioutil.ReadFile(s.credentialDictionaryPath)
 	if err != nil {
-		return creds, errors.Wrap(err, "could not read credentials dictionary file at "+path+":")
+		return fmt.Errorf("could not read credentials dictionary file at %q: %v", s.credentialDictionaryPath, err)
 	}
 
-	// Unmarshal content of JSON file into data structure
-	err = json.Unmarshal(content, &creds)
+	// Unmarshal content of JSON file into data structure.
+	err = json.Unmarshal(content, &s.credentials)
 	if err != nil {
-		return creds, err
+		return fmt.Errorf("unable to unmarshal dictionary contents: %v", err)
 	}
 
-	return creds, nil
+	s.term.Debugf("Loaded %d usernames and %d passwords\n", len(s.credentials.Usernames), len(s.credentials.Passwords))
+	return nil
 }
 
-// LoadRoutes opens a dictionary file and returns its contents as a Routes structure
-func LoadRoutes(path string) (Routes, error) {
-	file, err := os.Open(path)
+// LoadRoutes opens a dictionary file and returns its contents as a Routes structure.
+func (s *Scanner) LoadRoutes() error {
+	s.term.Debugf("Loading routes dictionary from path %q\n", s.routeDictionaryPath)
+
+	file, err := os.Open(s.routeDictionaryPath)
 	if err != nil {
-		return nil, err
+		return fmt.Errorf("unable to open dictionary: %v", err)
 	}
 	defer file.Close()
 
-	var routes Routes
 	scanner := bufio.NewScanner(file)
 	for scanner.Scan() {
-		routes = append(routes, scanner.Text())
+		s.routes = append(s.routes, scanner.Text())
 	}
 
-	return routes, scanner.Err()
+	s.term.Debugf("Loaded %d routes\n", len(s.routes))
+
+	return scanner.Err()
 }
 
-// ParseCredentialsFromString parses a dictionary string and returns its contents as a Credentials structure
+// ParseCredentialsFromString parses a dictionary string and returns its contents as a Credentials structure.
 func ParseCredentialsFromString(content string) (Credentials, error) {
 	var creds Credentials
 
-	// Unmarshal content of JSON file into data structure
+	// Unmarshal content of JSON file into data structure.
 	err := json.Unmarshal([]byte(content), &creds)
 	if err != nil {
 		return creds, err
@@ -81,28 +84,39 @@ func ParseCredentialsFromString(content string) (Credentials, error) {
 	return creds, nil
 }
 
-// ParseRoutesFromString parses a dictionary string and returns its contents as a Routes structure
+// ParseRoutesFromString parses a dictionary string and returns its contents as a Routes structure.
 func ParseRoutesFromString(content string) Routes {
 	return strings.Split(content, "\n")
 }
 
-// ParseTargetsFile parses an input file containing hosts to targets
-func ParseTargetsFile(path string) (string, error) {
+// LoadTargets parses the file containing hosts to targets, if the targets are
+// just set to a file name.
+func (s *Scanner) LoadTargets() error {
+	if len(s.targets) != 1 {
+		return nil
+	}
+
+	path := s.targets[0]
+
 	_, err := fs.Stat(path)
 	if err != nil {
-		return path, nil
+		return nil
 	}
 
 	file, err := fs.Open(path)
 	if err != nil {
-		return path, err
+		return fmt.Errorf("unable to open targets file %q: %v", path, err)
 	}
 	defer file.Close()
 
 	bytes, err := ioutil.ReadAll(file)
 	if err != nil {
-		return path, err
+		return fmt.Errorf("unable to read targets file %q: %v", path, err)
 	}
 
-	return strings.Replace(string(bytes), "\n", " ", -1), nil
+	s.targets = strings.Split(string(bytes), "\n")
+
+	s.term.Debugf("Successfully parsed targets file with %d entries", len(s.targets))
+
+	return nil
 }

loaders_test.go

@@ -1,12 +1,15 @@
-package cmrdr
+package cameradar
 
 import (
 	"bytes"
+	"errors"
 	"fmt"
 	"io/ioutil"
 	"os"
 	"testing"
 
+	"github.com/Ullaakut/disgo"
+
 	"github.com/stretchr/testify/assert"
 	"github.com/stretchr/testify/mock"
 )
@@ -91,85 +94,79 @@ func TestLoadCredentials(t *testing.T) {
 		Passwords: []string{"12345", "root"},
 	}
 
-	testCases := []struct {
+	tests := []struct {
+		description string
+
 		input      []byte
 		fileExists bool
 
-		expectedOutput Credentials
-		expectedErrMsg string
+		expectedCredentials Credentials
+		expectedErr         error
 	}{
-		// Valid baseline
 		{
-			fileExists:     true,
-			input:          credentialsJSONString,
-			expectedOutput: validCredentials,
+			description: "Valid baseline",
+
+			fileExists:          true,
+			input:               credentialsJSONString,
+			expectedCredentials: validCredentials,
 		},
-		// File does not exist
 		{
-			fileExists:     false,
-			input:          credentialsJSONString,
-			expectedErrMsg: "could not read credentials dictionary file at",
+			description: "File does not exist",
+
+			fileExists:  false,
+			input:       credentialsJSONString,
+			expectedErr: errors.New("could not read credentials dictionary file at \"/tmp/cameradar_test_load_credentials_1.xml\": open /tmp/cameradar_test_load_credentials_1.xml: no such file or directory"),
 		},
-		// Invalid format
 		{
-			fileExists:     true,
-			input:          []byte("not json"),
-			expectedErrMsg: "invalid character",
+			description: "Invalid format",
+
+			fileExists:  true,
+			input:       []byte("not json"),
+			expectedErr: errors.New("unable to unmarshal dictionary contents: invalid character 'o' in literal null (expecting 'u')"),
 		},
-		// No streams in dictionary
 		{
+			description: "No streams in dictionary",
+
 			fileExists: true,
 			input:      []byte("{\"invalid\":\"json\"}"),
 		},
 	}
-	for i, test := range testCases {
-		filePath := "/tmp/cameradar_test_load_credentials_" + fmt.Sprint(i) + ".xml"
-		// create file
-		if test.fileExists {
-			_, err := os.Create(filePath)
-			if err != nil {
-				fmt.Printf("could not create xml file for LoadCredentials: %v. iteration: %d. file path: %s\n", err, i, filePath)
-				os.Exit(1)
+
+	for i, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			filePath := "/tmp/cameradar_test_load_credentials_" + fmt.Sprint(i) + ".xml"
+			// create file.
+			if test.fileExists {
+				_, err := os.Create(filePath)
+				if err != nil {
+					t.Fatalf("could not create xml file for LoadCredentials: %v. iteration: %d. file path: %s\n", err, i, filePath)
+				}
+
+				err = ioutil.WriteFile(filePath, test.input, 0644)
+				if err != nil {
+					t.Fatalf("could not write xml file for LoadCredentials: %v. iteration: %d. file path: %s\n", err, i, filePath)
+				}
 			}
 
-			err = ioutil.WriteFile(filePath, test.input, 0644)
-			if err != nil {
-				fmt.Printf("could not write xml file for LoadCredentials: %v. iteration: %d. file path: %s\n", err, i, filePath)
-				os.Exit(1)
+			scanner := &Scanner{
+				term:                     disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				credentialDictionaryPath: filePath,
 			}
-		}
 
-		result, err := LoadCredentials(filePath)
-		if len(test.expectedErrMsg) > 0 {
-			if err == nil {
-				fmt.Printf("unexpected success in LoadCredentials test, iteration %d. expected error: %s\n", i, test.expectedErrMsg)
-				os.Exit(1)
+			err := scanner.LoadCredentials()
+
+			assert.Equal(t, test.expectedErr, err)
+
+			assert.Len(t, scanner.credentials.Usernames, len(test.expectedCredentials.Usernames))
+			for _, expectedUsername := range test.expectedCredentials.Usernames {
+				assert.Contains(t, scanner.credentials.Usernames, expectedUsername)
 			}
-			assert.Contains(t, err.Error(), test.expectedErrMsg, "wrong error message")
-		} else {
-			if err != nil {
-				fmt.Printf("unexpected error in LoadCredentials test, iteration %d: %v\n", i, err)
-				os.Exit(1)
+
+			assert.Len(t, scanner.credentials.Passwords, len(test.expectedCredentials.Passwords))
+			for _, expectedPassword := range test.expectedCredentials.Passwords {
+				assert.Contains(t, scanner.credentials.Passwords, expectedPassword)
 			}
-			for _, expectedUsername := range test.expectedOutput.Usernames {
-				foundUsername := false
-				for _, username := range result.Usernames {
-					if username == expectedUsername {
-						foundUsername = true
-					}
-				}
-				assert.Equal(t, true, foundUsername, "wrong usernames parsed")
-			}
-			for _, expectedPassword := range test.expectedOutput.Passwords {
-				foundPassword := false
-				for _, password := range result.Passwords {
-					if password == expectedPassword {
-						foundPassword = true
-					}
-				}
-				assert.Equal(t, true, foundPassword, "wrong passwords parsed")
-			}
-		}
+		})
 	}
 }
 
@@ -177,70 +174,69 @@ func TestLoadRoutes(t *testing.T) {
 	routesJSONString := []byte("admin\nroot")
 	validRoutes := Routes{"admin", "root"}
 
-	testCases := []struct {
-		input      []byte
-		fileExists bool
+	tests := []struct {
+		description string
+		input       []byte
+		fileExists  bool
 
-		expectedOutput Routes
-		expectedErrMsg string
+		expectedRoutes Routes
+		expectedErr    error
 	}{
-		// Valid baseline
 		{
+			description: "Valid baseline",
+
 			fileExists:     true,
 			input:          routesJSONString,
-			expectedOutput: validRoutes,
+			expectedRoutes: validRoutes,
 		},
-		// File does not exist
 		{
-			fileExists:     false,
-			input:          routesJSONString,
-			expectedErrMsg: "no such file or directory",
+			description: "File does not exist",
+
+			fileExists:  false,
+			input:       routesJSONString,
+			expectedErr: errors.New("unable to open dictionary: open /tmp/cameradar_test_load_routes_1.xml: no such file or directory"),
 		},
-		// No streams in dictionary
 		{
+			description: "No streams in dictionary",
+
 			fileExists: true,
 			input:      []byte(""),
 		},
 	}
-	for i, test := range testCases {
-		filePath := "/tmp/cameradar_test_load_routes_" + fmt.Sprint(i) + ".xml"
-		// create file
-		if test.fileExists {
-			_, err := os.Create(filePath)
-			if err != nil {
-				fmt.Printf("could not create xml file for LoadRoutes: %v. iteration: %d. file path: %s\n", err, i, filePath)
-				os.Exit(1)
-			}
 
-			err = ioutil.WriteFile(filePath, test.input, 0644)
-			if err != nil {
-				fmt.Printf("could not write xml file for LoadRoutes: %v. iteration: %d. file path: %s\n", err, i, filePath)
-				os.Exit(1)
-			}
-		}
+	for i, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			filePath := "/tmp/cameradar_test_load_routes_" + fmt.Sprint(i) + ".xml"
 
-		result, err := LoadRoutes(filePath)
-		if len(test.expectedErrMsg) > 0 {
-			if err == nil {
-				fmt.Printf("unexpected success in LoadRoutes test, iteration %d. expected error: %s\n", i, test.expectedErrMsg)
-				os.Exit(1)
-			}
-			assert.Contains(t, err.Error(), test.expectedErrMsg, "wrong error message")
-		} else {
-			if err != nil {
-				fmt.Printf("unexpected error in LoadRoutes test, iteration %d: %v\n", i, err)
-				os.Exit(1)
-			}
-			for _, expectedRoute := range test.expectedOutput {
-				foundRoute := false
-				for _, route := range result {
-					if route == expectedRoute {
-						foundRoute = true
-					}
+			// Create file.
+			if test.fileExists {
+				_, err := os.Create(filePath)
+				if err != nil {
+					fmt.Printf("could not create xml file for LoadRoutes: %v. iteration: %d. file path: %s\n", err, i, filePath)
+					os.Exit(1)
+				}
+
+				err = ioutil.WriteFile(filePath, test.input, 0644)
+				if err != nil {
+					fmt.Printf("could not write xml file for LoadRoutes: %v. iteration: %d. file path: %s\n", err, i, filePath)
+					os.Exit(1)
 				}
-				assert.Equal(t, true, foundRoute, "wrong routes parsed")
 			}
-		}
+
+			scanner := &Scanner{
+				term:                disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				routeDictionaryPath: filePath,
+			}
+
+			err := scanner.LoadRoutes()
+
+			assert.Equal(t, test.expectedErr, err)
+
+			assert.Len(t, scanner.routes, len(test.expectedRoutes))
+			for _, expectedRoute := range test.expectedRoutes {
+				assert.Contains(t, scanner.routes, expectedRoute)
+			}
+		})
 	}
 }
 
@@ -285,58 +281,59 @@ func TestParseCredentialsFromString(t *testing.T) {
 		},
 	}
 
-	testCases := []struct {
-		str            string
-		expectedResult Credentials
+	tests := []struct {
+		str                 string
+		expectedCredentials Credentials
 	}{
 		{
-			str:            "{\"usernames\":[\"\",\"admin\",\"Admin\",\"Administrator\",\"root\",\"supervisor\",\"ubnt\",\"service\",\"Dinion\",\"administrator\",\"admin1\"],\"passwords\":[\"\",\"admin\",\"9999\",\"123456\",\"pass\",\"camera\",\"1234\",\"12345\",\"fliradmin\",\"system\",\"jvc\",\"meinsm\",\"root\",\"4321\",\"111111\",\"1111111\",\"password\",\"ikwd\",\"supervisor\",\"ubnt\",\"wbox123\",\"service\"]}",
-			expectedResult: defaultCredentials,
+			str:                 "{\"usernames\":[\"\",\"admin\",\"Admin\",\"Administrator\",\"root\",\"supervisor\",\"ubnt\",\"service\",\"Dinion\",\"administrator\",\"admin1\"],\"passwords\":[\"\",\"admin\",\"9999\",\"123456\",\"pass\",\"camera\",\"1234\",\"12345\",\"fliradmin\",\"system\",\"jvc\",\"meinsm\",\"root\",\"4321\",\"111111\",\"1111111\",\"password\",\"ikwd\",\"supervisor\",\"ubnt\",\"wbox123\",\"service\"]}",
+			expectedCredentials: defaultCredentials,
 		},
 		{
-			str:            "{}",
-			expectedResult: Credentials{},
+			str:                 "{}",
+			expectedCredentials: Credentials{},
 		},
 		{
-			str:            "{\"invalid_field\":42}",
-			expectedResult: Credentials{},
+			str:                 "{\"invalid_field\":42}",
+			expectedCredentials: Credentials{},
 		},
 		{
-			str:            "not json",
-			expectedResult: Credentials{},
+			str:                 "not json",
+			expectedCredentials: Credentials{},
 		},
 	}
-	for _, test := range testCases {
+
+	for _, test := range tests {
 		parsedCredentials, _ := ParseCredentialsFromString(test.str)
-		assert.Equal(t, test.expectedResult, parsedCredentials, "unexpected result, parse error")
+		assert.Equal(t, test.expectedCredentials, parsedCredentials)
 	}
 }
 
 func TestParseRoutesFromString(t *testing.T) {
-	testCases := []struct {
+	tests := []struct {
 		str            string
-		expectedResult Routes
+		expectedRoutes Routes
 	}{
 		{
 			str:            "a\nb\nc",
-			expectedResult: []string{"a", "b", "c"},
+			expectedRoutes: []string{"a", "b", "c"},
 		},
 		{
 			str:            "a",
-			expectedResult: []string{"a"},
+			expectedRoutes: []string{"a"},
 		},
 		{
 			str:            "",
-			expectedResult: []string{""},
+			expectedRoutes: []string{""},
 		},
 	}
-	for _, test := range testCases {
-		parsedRoutes := ParseRoutesFromString(test.str)
-		assert.Equal(t, test.expectedResult, parsedRoutes, "unexpected result, parse error")
+
+	for _, test := range tests {
+		assert.Equal(t, test.expectedRoutes, ParseRoutesFromString(test.str))
 	}
 }
 
-func TestParseTargetsFile(t *testing.T) {
+func TestLoadTargets(t *testing.T) {
 
 	oldFS := fs
 	mfs := &mockedFS{}
@@ -345,64 +342,99 @@ func TestParseTargetsFile(t *testing.T) {
 		fs = oldFS
 	}()
 
-	testCases := []struct {
-		input string
+	tests := []struct {
+		description string
+
+		targets []string
 
 		fileExists bool
 		openError  bool
 		readError  bool
 
-		expectedResult string
-		expectedError  error
+		expectedTargets []string
+		expectedError   error
 	}{
 		{
-			input: "0.0.0.0",
+			description: "not a file",
+
+			targets: []string{"0.0.0.0"},
 
 			fileExists: false,
 
-			expectedResult: "0.0.0.0",
-			expectedError:  nil,
+			expectedTargets: []string{"0.0.0.0"},
+			expectedError:   nil,
 		},
 		{
-			input: "test_does_not_really_exist",
+			description: "not file targets",
+
+			targets: []string{"0.0.0.0", "1.2.3.4/24"},
+
+			expectedTargets: []string{"0.0.0.0", "1.2.3.4/24"},
+			expectedError:   nil,
+		},
+		{
+			description: "file contains targets",
+
+			targets: []string{"test_does_not_really_exist"},
 
 			fileExists: true,
 
-			expectedResult: "0.0.0.0 localhost 192.17.0.0/16 192.168.1.140-255 192.168.2-3.0-255",
-			expectedError:  nil,
+			expectedTargets: []string{"0.0.0.0", "localhost", "192.17.0.0/16", "192.168.1.140-255", "192.168.2-3.0-255"},
+			expectedError:   nil,
 		},
 		{
-			input: "test_does_not_really_exist",
+			description: "open error",
+
+			targets: []string{"test_does_not_really_exist"},
 
 			fileExists: true,
 			openError:  true,
 
-			expectedResult: "test_does_not_really_exist",
-			expectedError:  os.ErrNotExist,
+			expectedTargets: []string{"test_does_not_really_exist"},
+			expectedError:   errors.New("unable to open targets file \"test_does_not_really_exist\": file does not exist"),
 		},
 		{
-			input: "test_does_not_really_exist",
+			description: "read error",
+
+			targets: []string{"test_does_not_really_exist"},
 
 			fileExists: true,
 			readError:  true,
 
-			expectedResult: "test_does_not_really_exist",
-			expectedError:  os.ErrNotExist,
+			expectedTargets: []string{"test_does_not_really_exist"},
+			expectedError:   errors.New("unable to read targets file \"test_does_not_really_exist\": file does not exist"),
 		},
 	}
 
-	for _, test := range testCases {
-		mfs.fileExists = test.fileExists
-		mfs.openError = test.openError
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			mfs.fileExists = test.fileExists
+			mfs.openError = test.openError
 
-		mfs.fileMock = &fileMock{
-			readError: test.readError,
-		}
-		mfs.fileMock.On("Close").Return(nil)
-		mfs.fileMock.WriteString("0.0.0.0 localhost 192.17.0.0/16 192.168.1.140-255 192.168.2-3.0-255")
+			mfs.fileMock = &fileMock{
+				readError: test.readError,
+			}
+			mfs.fileMock.On("Close").Return(nil)
+			mfs.fileMock.WriteString("0.0.0.0\nlocalhost\n192.17.0.0/16\n192.168.1.140-255\n192.168.2-3.0-255")
 
-		result, err := ParseTargetsFile(test.input)
-		assert.Equal(t, test.expectedResult, result, "unexpected result, parse error")
-		assert.Equal(t, test.expectedError, err, "unexpected error")
+			scanner := &Scanner{
+				term:    disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				targets: test.targets,
+			}
+
+			err := scanner.LoadTargets()
+			assert.Equal(t, test.expectedTargets, scanner.targets)
+			assert.Equal(t, test.expectedError, err)
+		})
 	}
 }
+
+// This is completely useless and just lets me
+// not look at these two red lines on the coverage
+// any longer.
+func TestFS(t *testing.T) {
+	fs := osFS{}
+
+	fs.Open("test")
+	fs.Stat("test")
+}

models.go

@@ -1,19 +1,29 @@
-package cmrdr
+package cameradar
 
 import "time"
 
 // Stream represents a camera's RTSP stream
 type Stream struct {
-	Device   string `json:"device"`
-	Username string `json:"username"`
-	Password string `json:"password"`
-	Route    string `json:"route"`
-	Address  string `json:"address" validate:"required"`
-	Port     uint   `json:"port" validate:"required"`
+	Device   string   `json:"device"`
+	Username string   `json:"username"`
+	Password string   `json:"password"`
+	Routes   []string `json:"route"`
+	Address  string   `json:"address" validate:"required"`
+	Port     uint16   `json:"port" validate:"required"`
 
 	CredentialsFound bool `json:"credentials_found"`
 	RouteFound       bool `json:"route_found"`
 	Available        bool `json:"available"`
+
+	AuthenticationType int `json:"authentication_type"`
+}
+
+// Route returns this stream's route if there is one.
+func (s Stream) Route() string {
+	if len(s.Routes) > 0 {
+		return s.Routes[0]
+	}
+	return ""
 }
 
 // Credentials is a map of credentials
@@ -30,9 +40,8 @@ type Routes []string
 
 // Options contains all options needed to launch a complete cameradar scan
 type Options struct {
-	Target      string        `json:"target" validate:"required"`
-	Ports       string        `json:"ports"`
-	OutputFile  string        `json:"output_file"`
+	Targets     []string      `json:"target" validate:"required"`
+	Ports       []string      `json:"ports"`
 	Routes      Routes        `json:"routes"`
 	Credentials Credentials   `json:"credentials"`
 	Speed       int           `json:"speed"`

scan.go

@@ -0,0 +1,74 @@
+package cameradar
+
+import (
+	"strings"
+
+	"github.com/Ullaakut/nmap"
+)
+
+// Scan scans the target networks and tries to find RTSP streams within them.
+//
+// targets can be:
+//
+//    - a subnet (e.g.: 172.16.100.0/24)
+//    - an IP (e.g.: 172.16.100.10)
+//    - a hostname (e.g.: localhost)
+//    - a range of IPs (e.g.: 172.16.100.10-20)
+//
+// ports can be:
+//
+//    - one or multiple ports and port ranges separated by commas (e.g.: 554,8554-8560,18554-28554)
+func (s *Scanner) Scan() ([]Stream, error) {
+	s.term.StartStep("Scanning the network")
+
+	// Run nmap command to discover open ports on the specified targets & ports.
+	nmapScanner, err := nmap.NewScanner(
+		nmap.WithTargets(s.targets...),
+		nmap.WithPorts(s.ports...),
+		nmap.WithServiceInfo(),
+		nmap.WithTimingTemplate(nmap.Timing(s.scanSpeed)),
+	)
+	if err != nil {
+		return nil, s.term.FailStepf("unable to create network scanner: %v", err)
+	}
+
+	return s.scan(nmapScanner)
+}
+
+func (s *Scanner) scan(nmapScanner nmap.ScanRunner) ([]Stream, error) {
+	results, warnings, err := nmapScanner.Run()
+	for _, warning := range warnings {
+		s.term.Infoln("[Nmap Warning]", warning)
+	}
+	if err != nil {
+		return nil, s.term.FailStepf("error while scanning network: %v", err)
+	}
+
+	// Get streams from nmap results.
+	var streams []Stream
+	for _, host := range results.Hosts {
+		for _, port := range host.Ports {
+			if port.Status() != "open" {
+				continue
+			}
+
+			if !strings.Contains(port.Service.Name, "rtsp") {
+				continue
+			}
+
+			for _, address := range host.Addresses {
+				streams = append(streams, Stream{
+					Device:  port.Service.Product,
+					Address: address.Addr,
+					Port:    port.ID,
+				})
+			}
+		}
+	}
+
+	s.term.Debugf("Found %d RTSP streams\n", len(streams))
+
+	s.term.EndStep()
+
+	return streams, nil
+}

scan_test.go

@@ -0,0 +1,322 @@
+package cameradar
+
+import (
+	"errors"
+	"io/ioutil"
+	"os"
+	"testing"
+
+	"github.com/Ullaakut/disgo"
+
+	"github.com/Ullaakut/nmap"
+	"github.com/stretchr/testify/assert"
+	"github.com/stretchr/testify/mock"
+)
+
+type nmapMock struct {
+	mock.Mock
+}
+
+func (m *nmapMock) Run() (*nmap.Run, []string, error) {
+	args := m.Called()
+
+	if args.Get(0) != nil && args.Get(1) != nil {
+		return args.Get(0).(*nmap.Run), args.Get(1).([]string), args.Error(2)
+	}
+	return nil, nil, args.Error(2)
+}
+
+var (
+	validStream1 = Stream{
+		Device:  "fakeDevice",
+		Address: "fakeAddress",
+		Port:    1337,
+	}
+
+	validStream2 = Stream{
+		Device:  "fakeDevice",
+		Address: "differentFakeAddress",
+		Port:    1337,
+	}
+
+	invalidStreamNoPort = Stream{
+		Device:  "invalidDevice",
+		Address: "fakeAddress",
+		Port:    0,
+	}
+
+	invalidStreamNoAddress = Stream{
+		Device:  "invalidDevice",
+		Address: "",
+		Port:    1337,
+	}
+)
+
+func TestScan(t *testing.T) {
+	tests := []struct {
+		description string
+
+		targets    []string
+		ports      []string
+		speed      int
+		removePath bool
+
+		expectedErr     error
+		expectedStreams []Stream
+	}{
+		{
+			description: "create new scanner and call scan, no error",
+
+			targets: []string{"localhost"},
+			ports:   []string{"80"},
+			speed:   5,
+		},
+		{
+			description: "create new scanner with missing nmap installation",
+
+			removePath: true,
+			ports:      []string{"80"},
+
+			expectedErr: errors.New("unable to create network scanner: nmap binary was not found"),
+		},
+	}
+
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			if test.removePath {
+				os.Setenv("PATH", "")
+			}
+
+			scanner := &Scanner{
+				term:      disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+				targets:   test.targets,
+				ports:     test.ports,
+				scanSpeed: test.speed,
+			}
+
+			result, err := scanner.Scan()
+
+			assert.Equal(t, test.expectedErr, err)
+			assert.Equal(t, test.expectedStreams, result)
+		})
+	}
+}
+
+func TestInternalScan(t *testing.T) {
+	tests := []struct {
+		description string
+
+		nmapResult   *nmap.Run
+		nmapWarnings []string
+		nmapError    error
+
+		expectedStreams []Stream
+		expectedErr     error
+	}{
+		{
+			description: "valid streams",
+
+			nmapResult: &nmap.Run{
+				Hosts: []nmap.Host{
+					{
+						Addresses: []nmap.Address{
+							{
+								Addr: validStream1.Address,
+							},
+						},
+						Ports: []nmap.Port{
+							{
+								State: nmap.State{
+									State: "open",
+								},
+								ID: validStream1.Port,
+								Service: nmap.Service{
+									Name:    "rtsp",
+									Product: validStream1.Device,
+								},
+							},
+						},
+					},
+					{
+						Addresses: []nmap.Address{
+							{
+								Addr: validStream2.Address,
+							},
+						},
+						Ports: []nmap.Port{
+							{
+								State: nmap.State{
+									State: "open",
+								},
+								ID: validStream2.Port,
+								Service: nmap.Service{
+									Name:    "rtsp-alt",
+									Product: validStream2.Device,
+								},
+							},
+						},
+					},
+				},
+			},
+
+			expectedStreams: []Stream{validStream1, validStream2},
+		},
+		{
+			description: "two invalid targets, no error",
+
+			nmapResult: &nmap.Run{
+				Hosts: []nmap.Host{
+					{
+						Addresses: []nmap.Address{
+							{
+								Addr: invalidStreamNoPort.Address,
+							},
+						},
+					},
+					{
+						Addresses: []nmap.Address{},
+						Ports: []nmap.Port{
+							{
+								State: nmap.State{
+									State: "open",
+								},
+								ID: validStream2.Port,
+								Service: nmap.Service{
+									Name:    "rtsp-alt",
+									Product: invalidStreamNoAddress.Device,
+								},
+							},
+						},
+					},
+				},
+			},
+
+			expectedStreams: nil,
+		},
+		{
+			description: "different port states, no error",
+
+			nmapResult: &nmap.Run{
+				Hosts: []nmap.Host{
+					{
+						Addresses: []nmap.Address{
+							{
+								Addr: invalidStreamNoPort.Address,
+							}},
+						Ports: []nmap.Port{
+							{
+								State: nmap.State{
+									State: "closed",
+								},
+								ID: validStream2.Port,
+								Service: nmap.Service{
+									Name:    "rtsp-alt",
+									Product: invalidStreamNoAddress.Device,
+								},
+							},
+						},
+					},
+					{
+						Addresses: []nmap.Address{
+							{
+								Addr: invalidStreamNoPort.Address,
+							}},
+						Ports: []nmap.Port{
+							{
+								State: nmap.State{
+									State: "unfiltered",
+								},
+								ID: validStream2.Port,
+								Service: nmap.Service{
+									Name:    "rtsp-alt",
+									Product: invalidStreamNoAddress.Device,
+								},
+							},
+						},
+					},
+					{
+						Addresses: []nmap.Address{
+							{
+								Addr: invalidStreamNoPort.Address,
+							}},
+						Ports: []nmap.Port{
+							{
+								State: nmap.State{
+									State: "filtered",
+								},
+								ID: validStream2.Port,
+								Service: nmap.Service{
+									Name:    "rtsp-alt",
+									Product: invalidStreamNoAddress.Device,
+								},
+							},
+						},
+					},
+				},
+			},
+
+			expectedStreams: nil,
+		},
+		{
+			description: "not rtsp, no error",
+
+			nmapResult: &nmap.Run{
+				Hosts: []nmap.Host{
+					{
+						Addresses: []nmap.Address{
+							{
+								Addr: invalidStreamNoPort.Address,
+							}},
+						Ports: []nmap.Port{
+							{
+								State: nmap.State{
+									State: "open",
+								},
+								ID: validStream2.Port,
+								Service: nmap.Service{
+									Name:    "tcp",
+									Product: invalidStreamNoAddress.Device,
+								},
+							},
+						},
+					},
+				},
+			},
+
+			expectedStreams: nil,
+		},
+		{
+			description: "no hosts found",
+
+			nmapResult:      &nmap.Run{},
+			expectedStreams: nil,
+		},
+		{
+			description: "scan failed",
+
+			nmapError:    errors.New("scan failed"),
+			nmapWarnings: []string{"invalid host"},
+			expectedErr:  errors.New("error while scanning network: scan failed"),
+		},
+	}
+
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			nmapMock := &nmapMock{}
+
+			nmapMock.On("Run").Return(test.nmapResult, test.nmapWarnings, test.nmapError)
+
+			scanner := &Scanner{
+				term: disgo.NewTerminal(disgo.WithDefaultOutput(ioutil.Discard)),
+			}
+
+			results, err := scanner.scan(nmapMock)
+
+			assert.Equal(t, test.expectedErr, err)
+			assert.Equal(t, test.expectedStreams, results, "wrong streams parsed")
+			assert.Equal(t, len(test.expectedStreams), len(results), "wrong streams parsed")
+
+			nmapMock.AssertExpectations(t)
+		})
+	}
+}

scanner.go

@@ -0,0 +1,162 @@
+package cameradar
+
+import (
+	"fmt"
+	"os"
+	"time"
+
+	"github.com/Ullaakut/disgo"
+	"github.com/Ullaakut/disgo/style"
+	curl "github.com/Ullaakut/go-curl"
+)
+
+const (
+	defaultCredentialDictionaryPath = "${GOPATH}/src/github.com/Ullaakut/cameradar/dictionaries/credentials.json"
+	defaultRouteDictionaryPath      = "${GOPATH}/src/github.com/Ullaakut/cameradar/dictionaries/routes"
+)
+
+// Scanner represents a cameradar scanner. It scans a network and
+// attacks all streams found to get their RTSP credentials.
+type Scanner struct {
+	curl Curler
+	term *disgo.Terminal
+
+	targets                  []string
+	ports                    []string
+	debug                    bool
+	verbose                  bool
+	scanSpeed                int
+	attackInterval           time.Duration
+	timeout                  time.Duration
+	credentialDictionaryPath string
+	routeDictionaryPath      string
+
+	credentials Credentials
+	routes      Routes
+}
+
+// New creates a new Cameradar Scanner and applies the given options.
+func New(options ...func(*Scanner)) (*Scanner, error) {
+	err := curl.GlobalInit(curl.GLOBAL_ALL)
+	if err != nil {
+		return nil, fmt.Errorf("unable to initialize curl library: %v", err)
+	}
+
+	handle := curl.EasyInit()
+	if handle == nil {
+		return nil, fmt.Errorf("unable to initialize curl handle: %v", err)
+	}
+
+	scanner := &Scanner{
+		curl:                     &Curl{CURL: handle},
+		credentialDictionaryPath: defaultCredentialDictionaryPath,
+		routeDictionaryPath:      defaultRouteDictionaryPath,
+	}
+
+	for _, option := range options {
+		option(scanner)
+	}
+
+	gopath := os.Getenv("GOPATH")
+	if gopath == "" && scanner.credentialDictionaryPath == defaultCredentialDictionaryPath && scanner.routeDictionaryPath == defaultRouteDictionaryPath {
+		disgo.Errorln(style.Failure("No $GOPATH was found.\nDictionaries may not be loaded properly, please set your $GOPATH to use the default dictionaries."))
+	}
+
+	scanner.credentialDictionaryPath = os.ExpandEnv(scanner.credentialDictionaryPath)
+	scanner.routeDictionaryPath = os.ExpandEnv(scanner.routeDictionaryPath)
+
+	scanner.term = disgo.NewTerminal(
+		disgo.WithDebug(scanner.debug),
+	)
+
+	err = scanner.LoadTargets()
+	if err != nil {
+		return nil, fmt.Errorf("unable to parse target file: %v", err)
+	}
+
+	scanner.term.StartStepf("Loading credentials")
+	err = scanner.LoadCredentials()
+	if err != nil {
+		return nil, scanner.term.FailStepf("unable to load credentials dictionary: %v", err)
+	}
+
+	scanner.term.StartStepf("Loading routes")
+	err = scanner.LoadRoutes()
+	if err != nil {
+		return nil, scanner.term.FailStepf("unable to load credentials dictionary: %v", err)
+	}
+
+	disgo.EndStep()
+
+	return scanner, nil
+}
+
+// WithTargets specifies the targets to scan and attack.
+func WithTargets(targets []string) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.targets = targets
+	}
+}
+
+// WithPorts specifies the ports to scan and attack.
+func WithPorts(ports []string) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.ports = ports
+	}
+}
+
+// WithDebug specifies whether or not to enable debug logs.
+func WithDebug(debug bool) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.debug = debug
+	}
+}
+
+// WithVerbose specifies whether or not to enable verbose logs.
+func WithVerbose(verbose bool) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.verbose = verbose
+	}
+}
+
+// WithCustomCredentials specifies a custom credential dictionary
+// to use for the attacks.
+func WithCustomCredentials(dictionaryPath string) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.credentialDictionaryPath = dictionaryPath
+	}
+}
+
+// WithCustomRoutes specifies a custom route dictionary
+// to use for the attacks.
+func WithCustomRoutes(dictionaryPath string) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.routeDictionaryPath = dictionaryPath
+	}
+}
+
+// WithScanSpeed specifies the speed at which the scan should be executed. Faster
+// means easier to detect, slower has bigger timeout values and is more silent.
+func WithScanSpeed(speed int) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.scanSpeed = speed
+	}
+}
+
+// WithAttackInterval specifies the interval of time during which Cameradar
+// should wait between each attack attempt during bruteforcing.
+// Setting a high value for this obviously makes attacks much slower.
+func WithAttackInterval(interval time.Duration) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.attackInterval = interval
+	}
+}
+
+// WithTimeout specifies the amount of time after which attack requests should
+// timeout. This should be high if the network you are attacking has a poor
+// connectivity or that you are located far away from it.
+func WithTimeout(timeout time.Duration) func(s *Scanner) {
+	return func(s *Scanner) {
+		s.timeout = timeout
+	}
+}

scanner_test.go

@@ -0,0 +1,150 @@
+package cameradar
+
+import (
+	"fmt"
+	"io/ioutil"
+	"os"
+	"testing"
+	"time"
+
+	curl "github.com/Ullaakut/go-curl"
+	"github.com/stretchr/testify/assert"
+)
+
+func TestNew(t *testing.T) {
+	tests := []struct {
+		description string
+
+		targets           []string
+		ports             []string
+		debug             bool
+		verbose           bool
+		customCredentials string
+		customRoutes      string
+		speed             int
+		attackInterval    time.Duration
+		timeout           time.Duration
+
+		loadTargetsFail bool
+		loadCredsFail   bool
+		loadRoutesFail  bool
+
+		curlGlobalFail bool
+		curlEasyFail   bool
+
+		expectedErr bool
+	}{
+		{
+			description: "no error while loading dictionaries",
+
+			targets: []string{"titi", "toto"},
+			ports:   []string{"554"},
+			debug:   true,
+			verbose: false,
+			speed:   3,
+			timeout: time.Millisecond,
+		},
+		{
+			description: "unable to load targets",
+
+			loadTargetsFail: true,
+
+			expectedErr: true,
+		},
+		{
+			description: "unable to load credentials",
+
+			loadCredsFail: true,
+
+			expectedErr: true,
+		},
+		{
+			description: "unable to load routes",
+
+			loadRoutesFail: true,
+
+			expectedErr: true,
+		},
+		{
+			description: "curl fails to init",
+
+			curlGlobalFail: true,
+
+			expectedErr: true,
+		},
+		{
+			description: "curl fails to create handle",
+
+			curlEasyFail: true,
+
+			expectedErr: true,
+		},
+		{
+			description: "gopath not set and default dicts",
+
+			customCredentials: defaultCredentialDictionaryPath,
+			customRoutes:      defaultRouteDictionaryPath,
+
+			expectedErr: true,
+		},
+	}
+
+	// Temporarily empty the gopath for testing purposes.
+	defer os.Setenv("GOPATH", os.Getenv("GOPATH"))
+
+	for i, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			os.Setenv("GOPATH", "")
+
+			if test.loadTargetsFail {
+				test.targets = []string{generateTmpFileName(i, "targets")}
+				ioutil.WriteFile(test.targets[0], []byte(`0.0.0.0`), 0000)
+			}
+
+			if !test.loadCredsFail && test.customCredentials == "" {
+				test.customCredentials = generateTmpFileName(i, "creds")
+				ioutil.WriteFile(test.customCredentials, []byte(`{"usernames":["admin"],"passwords":["admin"]}`), 0644)
+			}
+
+			if !test.loadRoutesFail && test.customRoutes == "" {
+				test.customRoutes = generateTmpFileName(i, "routes")
+				ioutil.WriteFile(test.customRoutes, []byte(`live.sdp`), 0644)
+			}
+
+			curl.TestGlobalFail = test.curlGlobalFail
+			curl.TestEasyFail = test.curlEasyFail
+
+			scanner, err := New(
+				WithTargets(test.targets),
+				WithPorts(test.ports),
+				WithDebug(test.debug),
+				WithVerbose(test.verbose),
+				WithScanSpeed(test.speed),
+				WithAttackInterval(test.attackInterval),
+				WithTimeout(test.timeout),
+				WithCustomCredentials(test.customCredentials),
+				WithCustomRoutes(test.customRoutes),
+			)
+
+			if test.expectedErr {
+				assert.Error(t, err)
+			} else {
+				assert.NoError(t, err)
+			}
+
+			if scanner != nil {
+				assert.Equal(t, test.targets, scanner.targets)
+				assert.Equal(t, test.ports, scanner.ports)
+				assert.Equal(t, test.debug, scanner.debug)
+				assert.Equal(t, test.verbose, scanner.verbose)
+				assert.Equal(t, test.speed, scanner.scanSpeed)
+				assert.Equal(t, test.attackInterval, scanner.attackInterval)
+				assert.Equal(t, test.timeout, scanner.timeout)
+			}
+		})
+	}
+}
+
+func generateTmpFileName(iteration int, purpose string) string {
+	return fmt.Sprintf("/tmp/cameradar_test_scanner_%s_%d_%d", purpose, time.Now().Unix(), iteration)
+}

summary.go

@@ -0,0 +1,68 @@
+package cameradar
+
+import (
+	"github.com/Ullaakut/disgo/style"
+	curl "github.com/Ullaakut/go-curl"
+)
+
+// PrintStreams prints information on each stream.
+func (s *Scanner) PrintStreams(streams []Stream) {
+	if len(streams) == 0 {
+		s.term.Infof("%s No streams were found. Please make sure that your target is on an accessible network.\n", style.Failure(style.SymbolCross))
+	}
+
+	success := 0
+	for _, stream := range streams {
+		if stream.Available {
+			s.term.Infof("%s\tDevice RTSP URL:\t%s\n", style.Success(style.SymbolRightTriangle), style.Link(GetCameraRTSPURL(stream)))
+			s.term.Infof("\tAvailable:\t\t%s\n", style.Success(style.SymbolCheck))
+			success++
+		} else {
+			s.term.Infof("%s\tAdmin panel URL:\t%s You can use this URL to try attacking the camera's admin panel instead.\n", style.Failure(style.SymbolCross), style.Link(GetCameraAdminPanelURL(stream)))
+			s.term.Infof("\tAvailable:\t\t%s\n", style.Failure(style.SymbolCross))
+		}
+
+		if len(stream.Device) > 0 {
+			s.term.Infof("\tDevice model:\t\t%s\n\n", stream.Device)
+		}
+
+		s.term.Infof("\tIP address:\t\t%s\n", stream.Address)
+		s.term.Infof("\tRTSP port:\t\t%d\n", stream.Port)
+
+		switch stream.AuthenticationType {
+		case curl.AUTH_NONE:
+			s.term.Infoln("\tThis camera does not require authentication")
+		case curl.AUTH_BASIC:
+			s.term.Infoln("\tAuth type:\t\tbasic")
+		case curl.AUTH_DIGEST:
+			s.term.Infoln("\tAuth type:\t\tdigest")
+		}
+
+		if stream.CredentialsFound {
+			s.term.Infof("\tUsername:\t\t%s\n", style.Success(stream.Username))
+			s.term.Infof("\tPassword:\t\t%s\n", style.Success(stream.Password))
+		} else {
+			s.term.Infof("\tUsername:\t\t%s\n", style.Failure("not found"))
+			s.term.Infof("\tPassword:\t\t%s\n", style.Failure("not found"))
+		}
+
+		s.term.Infoln("\tRTSP routes:")
+		if stream.RouteFound {
+			for _, route := range stream.Routes {
+				s.term.Infoln(style.Success("\t\t\t\t/" + route))
+			}
+		} else {
+			s.term.Infoln(style.Failure("not found"))
+		}
+
+		s.term.Info("\n\n")
+	}
+
+	if success > 1 {
+		s.term.Infof("%s Successful attack: %s devices were accessed", style.Success(style.SymbolCheck), style.Success(len(streams)))
+	} else if success == 1 {
+		s.term.Infof("%s Successful attack: %s device was accessed", style.Success(style.SymbolCheck), style.Success("one"))
+	} else {
+		s.term.Infof("%s Streams were found but none were accessed. They are most likely configured with secure credentials and routes. You can try adding entries to the dictionary or generating your own in order to attempt a bruteforce attack on the cameras.\n", style.Failure("\xE2\x9C\x96"))
+	}
+}

summary_test.go

@@ -0,0 +1,186 @@
+package cameradar
+
+import (
+	"bytes"
+	"testing"
+
+	"github.com/Ullaakut/disgo"
+	"github.com/stretchr/testify/assert"
+)
+
+var (
+	unavailable = Stream{}
+
+	available = Stream{
+		Available: true,
+	}
+
+	deviceFound = Stream{
+		Device: "devicename",
+	}
+
+	noAuth = Stream{
+		AuthenticationType: 0,
+	}
+
+	basic = Stream{
+		AuthenticationType: 1,
+	}
+
+	digest = Stream{
+		AuthenticationType: 2,
+	}
+
+	credsFound = Stream{
+		CredentialsFound: true,
+		Username:         "us3r",
+		Password:         "p4ss",
+	}
+
+	routeFound = Stream{
+		RouteFound: true,
+		Routes:     []string{"r0ute"},
+	}
+)
+
+func TestPrintStreams(t *testing.T) {
+	tests := []struct {
+		description string
+
+		streams []Stream
+
+		expectedLogs []string
+	}{
+		{
+			description: "displays the proper message when no streams found",
+
+			streams: nil,
+
+			expectedLogs: []string{"No streams were found"},
+		},
+		{
+			description: "displays the admin panel URL when a stream is not accessible",
+
+			streams: []Stream{
+				unavailable,
+			},
+
+			expectedLogs: []string{"Admin panel URL"},
+		},
+		{
+			description: "displays the device name when it is found",
+
+			streams: []Stream{
+				deviceFound,
+			},
+
+			expectedLogs: []string{"Device model:"},
+		},
+		{
+			description: "displays authentication type (no auth)",
+
+			streams: []Stream{
+				noAuth,
+			},
+
+			expectedLogs: []string{"This camera does not require authentication"},
+		},
+		{
+			description: "displays authentication type (basic)",
+
+			streams: []Stream{
+				basic,
+			},
+
+			expectedLogs: []string{"basic"},
+		},
+		{
+			description: "displays authentication type (digest)",
+
+			streams: []Stream{
+				digest,
+			},
+
+			expectedLogs: []string{"digest"},
+		},
+		{
+			description: "displays credentials properly",
+
+			streams: []Stream{
+				credsFound,
+			},
+
+			expectedLogs: []string{
+				"Username",
+				"us3r",
+				"Password",
+				"p4ss",
+			},
+		},
+		{
+			description: "displays route properly",
+
+			streams: []Stream{
+				routeFound,
+			},
+
+			expectedLogs: []string{
+				"RTSP route",
+				"/r0ute",
+			},
+		},
+		{
+			description: "displays successes properly (no success)",
+
+			streams: []Stream{
+				unavailable,
+			},
+
+			expectedLogs: []string{
+				"Streams were found but none were accessed",
+			},
+		},
+		{
+			description: "displays successes properly (1 success)",
+
+			streams: []Stream{
+				available,
+			},
+
+			expectedLogs: []string{
+				"Successful attack",
+				"device was accessed",
+			},
+		},
+		{
+			description: "displays successes properly (multiple successes)",
+
+			streams: []Stream{
+				available,
+				available,
+				available,
+				available,
+			},
+
+			expectedLogs: []string{
+				"Successful attack",
+				"devices were accessed",
+			},
+		},
+	}
+
+	for _, test := range tests {
+		t.Run(test.description, func(t *testing.T) {
+			writer := &bytes.Buffer{}
+			scanner := &Scanner{
+				term: disgo.NewTerminal(disgo.WithDefaultOutput(writer)),
+			}
+
+			scanner.PrintStreams(test.streams)
+
+			for _, expectedLog := range test.expectedLogs {
+				assert.Contains(t, writer.String(), expectedLog)
+			}
+		})
+	}
+}

tools/dictionary_updater/main.go

@@ -0,0 +1,191 @@
+package main
+
+import (
+	"bytes"
+	"fmt"
+	"io/ioutil"
+	"log"
+	"net/http"
+	"sort"
+	"strings"
+	"sync"
+
+	"github.com/Ullaakut/disgo/style"
+
+	"github.com/PuerkitoBio/goquery"
+	"github.com/Ullaakut/disgo"
+	"github.com/vbauerster/mpb"
+	"github.com/vbauerster/mpb/decor"
+)
+
+const dictionaryURL = "https://community.geniusvision.net/platform/cprndr/manulist"
+
+var rtspURLsFound sync.Map
+
+func main() {
+	if err := updateDictionary(); err != nil {
+		log.Fatalf(err.Error())
+	}
+}
+
+func updateDictionary() error {
+	disgo.SetTerminalOptions(disgo.WithColors(true), disgo.WithDebug(true))
+
+	disgo.StartStep("Fetching dictionary list")
+	resp, err := http.Get(dictionaryURL)
+	if err != nil {
+		return disgo.FailStepf("unable to download dictionaries: %v", err)
+	}
+	defer resp.Body.Close()
+
+	disgo.StartStep("Parsing dictionary list")
+	doc, err := goquery.NewDocumentFromReader(resp.Body)
+	if err != nil {
+		return disgo.FailStepf("unable to read from dictionary list: %v", err)
+	}
+
+	var vendorURLs []string
+	doc.Find("td.simpletable a").Each(func(i int, s *goquery.Selection) {
+		url, ok := s.Attr("href")
+		if !ok {
+			return
+		}
+
+		if url != "javascript:void(0)" {
+			vendorURLs = append(vendorURLs, url)
+		}
+	})
+
+	disgo.StartStep("Loading current cameradar dictionary")
+	currentDictionary, err := ioutil.ReadFile("dictionaries/routes")
+	if err != nil {
+		return disgo.FailStepf("unable to read current dictionary: %v", err)
+	}
+
+	dictionaryEntries := bytes.Split(currentDictionary, []byte("\n"))
+
+	for _, rtspURL := range dictionaryEntries {
+		rtspURLsFound.Store(string(rtspURL), struct{}{})
+	}
+
+	disgo.Debugf("Current dictionary has %d entries\n", len(dictionaryEntries))
+	disgo.EndStep()
+
+	p := mpb.New(mpb.WithWidth(64))
+	name := fmt.Sprintf("Fetching default routes from %d constructors:", len(vendorURLs))
+	bar := p.AddBar(int64(len(vendorURLs)),
+		// set custom bar style, default one is "[=>-]"
+		mpb.BarStyle("╢▌▌░╟"),
+		mpb.PrependDecorators(
+			// display our name with one space on the right
+			decor.Name(name, decor.WC{W: len(name), C: decor.DidentRight}),
+		),
+		mpb.AppendDecorators(decor.Percentage()),
+	)
+
+	for _, url := range vendorURLs {
+		go loadRoutes(url, bar)
+	}
+
+	p.Wait()
+
+	disgo.StartStep("Converting found routes into proper data model")
+
+	var rtspURLs []string
+	rtspURLsFound.Range(func(rtspURL, _ interface{}) bool {
+		disgo.Infoln("Adding URL", rtspURL.(string))
+		rtspURLs = append(rtspURLs, rtspURL.(string))
+		return true
+	})
+
+	sort.Slice(rtspURLs, func(a, b int) bool {
+		return rtspURLs[a] < rtspURLs[b]
+	})
+
+	disgo.EndStep()
+
+	if len(dictionaryEntries) < len(rtspURLs) {
+		disgo.Infof("%s Saving them in cameradar default dictionary.\n", style.Success("Found ", len(rtspURLs)-len(dictionaryEntries), " new entries!"))
+		saveRoutes(rtspURLs)
+	} else {
+		disgo.Infoln(style.Success("No new entry found, dictionary up-to-date! :)"))
+	}
+
+	return nil
+}
+
+func loadRoutes(url string, bar *mpb.Bar) {
+	defer bar.IncrBy(1)
+
+	var (
+		failureCounter int
+		resp           *http.Response
+		err            error
+	)
+	for failureCounter < 5 {
+		resp, err = http.Get(url)
+		if err != nil {
+			failureCounter++
+		} else {
+			break
+		}
+	}
+
+	if failureCounter == 5 {
+		disgo.Errorln("Request failed 5 times in a row, giving up on this vendor")
+		return
+	}
+
+	defer resp.Body.Close()
+
+	doc, err := goquery.NewDocumentFromReader(resp.Body)
+	if err != nil {
+		disgo.Errorf("unable to read from dictionary list for URL %q: %v\n", url, err)
+		return
+	}
+
+	doc.Find("tr.simpletable td.simpletable:nth-child(4) a").Each(func(i int, s *goquery.Selection) {
+		rtspURL := s.Text()
+
+		if strings.HasPrefix(rtspURL, "(") && strings.HasSuffix(rtspURL, ")") {
+			return
+		}
+
+		if strings.HasPrefix(rtspURL, "[") && strings.HasSuffix(rtspURL, "]") {
+			return
+		}
+
+		if strings.HasPrefix(rtspURL, "http://") {
+			return
+		}
+
+		// Skip the port and only get the route.
+		if strings.HasPrefix(rtspURL, "rtsp://ip-addr:") {
+			routeAndPort := strings.TrimSpace(strings.TrimPrefix(rtspURL, "rtsp://ip-addr:"))
+			route := strings.TrimLeft(routeAndPort, "0123456789/")
+			rtspURLsFound.Store(route, struct{}{})
+			return
+		}
+
+		switch rtspURL {
+		case "",
+			"rtsp://ip-addr/",
+			"rtsp://ip-addr",
+			"rtsp://ip-addr:pass@10.0.0.5:6667/blinkhd":
+			return
+		default:
+			route := strings.TrimSpace(strings.TrimPrefix(rtspURL, "rtsp://ip-addr/"))
+			rtspURLsFound.Store(route, struct{}{})
+		}
+	})
+}
+
+func saveRoutes(rtspURLs []string) {
+	contents := strings.Join(rtspURLs, "\n")
+
+	disgo.StartStep("Writing new dictionary file")
+	err := ioutil.WriteFile("dictionaries/routes", []byte(contents), 0644)
+	if err != nil {
+		disgo.FailStepf("unable to write dictionary: %v", err)
+	}
+}

tools/xplatform-docker-build/go.mod

@@ -0,0 +1,10 @@
+module github.com/Ullaakut/cameradar/magefile
+
+go 1.16
+
+require (
+	github.com/Ullaakut/disgo v0.3.1
+	github.com/fatih/color v1.10.0 // indirect
+	github.com/magefile/mage v1.11.0
+	github.com/stretchr/testify v1.7.0 // indirect
+)

tools/xplatform-docker-build/go.sum

@@ -0,0 +1,23 @@
+github.com/Ullaakut/disgo v0.3.1 h1:BGGVHynji41KGuGI02ztTCnILRvyzlvmiCRl5bBpjKk=
+github.com/Ullaakut/disgo v0.3.1/go.mod h1:/CSvpnYVSKOeh2dvUvx9cXshzz2t7T1/lRO/MrFj3fI=
+github.com/davecgh/go-spew v1.1.0 h1:ZDRjVQ15GmhC3fiQ8ni8+OwkZQO4DARzQgrnXU1Liz8=
+github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/fatih/color v1.10.0 h1:s36xzo75JdqLaaWoiEHk767eHiwo0598uUxyfiPkDsg=
+github.com/fatih/color v1.10.0/go.mod h1:ELkj/draVOlAH/xkhN6mQ50Qd0MPOk5AAr3maGEBuJM=
+github.com/magefile/mage v1.11.0 h1:C/55Ywp9BpgVVclD3lRnSYCwXTYxmSppIgLeDYlNuls=
+github.com/magefile/mage v1.11.0/go.mod h1:z5UZb/iS3GoOSn0JgWuiw7dxlurVYTu+/jHXqQg881A=
+github.com/mattn/go-colorable v0.1.8 h1:c1ghPdyEDarC70ftn0y+A/Ee++9zz8ljHG1b13eJ0s8=
+github.com/mattn/go-colorable v0.1.8/go.mod h1:u6P/XSegPjTcexA+o6vUJrdnUu04hMope9wVRipJSqc=
+github.com/mattn/go-isatty v0.0.12 h1:wuysRhFDzyxgEmMf5xjvJ2M9dZoWAXNNr5LSBS7uHXY=
+github.com/mattn/go-isatty v0.0.12/go.mod h1:cbi8OIDigv2wuxKPP5vlRcQ1OAZbq2CE4Kysco4FUpU=
+github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
+github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
+github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
+github.com/stretchr/testify v1.7.0 h1:nwc3DEeHmmLAfoZucVR881uASk0Mfjw8xYJ99tb5CcY=
+github.com/stretchr/testify v1.7.0/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
+golang.org/x/sys v0.0.0-20200116001909-b77594299b42/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20200223170610-d5e6a3e2c0ae h1:/WDfKMnPU+m5M4xB+6x4kaepxRw6jWvR5iDRdvjHgy8=
+golang.org/x/sys v0.0.0-20200223170610-d5e6a3e2c0ae/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c h1:dUUwHk2QECo/6vqA44rthZ8ie2QXMNeKRTHCNY2nXvo=
+gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=

tools/xplatform-docker-build/magefile.go

@@ -0,0 +1,109 @@
+//+build mage
+
+package main
+
+import (
+	"os"
+
+	"github.com/magefile/mage/sh"
+	"github.com/Ullaakut/disgo"
+	"github.com/Ullaakut/disgo/style"
+)
+
+var supportedPlatforms = map[string]string{
+	"linux/amd64": "ullaakut/cameradar:amd64",
+	"linux/386": "ullaakut/cameradar:386",
+	"linux/arm64": "ullaakut/cameradar:arm64",
+	"linux/arm/v7": "ullaakut/cameradar:armv7",
+	//"linux/riscv64": "ullaakut/cameradar:riscv64", // UNSUPPORTED.
+	//"linux/ppc64le": "ullaakut/cameradar:ppc64le", // UNSUPPORTED.
+	//"linux/s390x": "ullaakut/cameradar:s390x", // UNSUPPORTED.
+	//"linux/arm/v6": "ullaakut/cameradar:armv6", // UNSUPPORTED.
+}
+
+var Default = Build
+
+// Follows https://www.docker.com/blog/multi-platform-docker-builds/.
+func Build() error {
+	term := disgo.NewTerminal(disgo.WithColors(true))
+
+	term.StartStep("Building images for all platforms")
+	term.Infof("Builds planned for %v\n", supportedPlatforms)
+	for platform, name := range supportedPlatforms {
+		term.Infoln("Building image for", platform, "at", name)
+
+		// docker buildx build --platform linux/arm/v7 -t ullaakut/cameradar:armv7 .
+		if err := sh.Run("docker", "buildx", "build", "--platform", platform, "-t", name, "../../"); err != nil {
+			return term.FailStepf("unable to build image: %v", err)
+		}
+	}
+
+	term.Infoln(style.Success("Cross-platform docker build successful."))
+
+	return nil
+}
+
+func Publish() error {
+	term := disgo.NewTerminal(disgo.WithColors(true))
+
+	term.StartStep("Pushing images to DockerHub")
+	term.Infoln("Pushing ullaakut/cameradar:latest")
+	if err := sh.Run("docker", "push", "ullaakut/cameradar:latest"); err != nil {
+		return term.FailStepf("unable to push latest docker images to docker hub: %v", err)
+	}
+
+	if version, exists := os.LookupEnv("CAMERADAR_VERSION"); exists {
+		term.Infoln("Pushing ullaakut/cameradar:"+version)
+		if err := sh.Run("docker", "push", "ullaakut/cameradar:"+version); err != nil {
+			return term.FailStepf("unable to push versionned docker images to docker hub: %v", err)
+		}
+	}
+
+	term.StartStep("Pushing images to GitHub Packages")
+	term.Infoln("Pushing docker.pkg.github.com/ullaakut/cameradar/cameradar:latest")
+	if err := sh.Run("docker", "tag", "ullaakut/cameradar:latest", "docker.pkg.github.com/ullaakut/cameradar/cameradar:latest"); err != nil {
+		return term.FailStepf("unable to push latest docker images to docker hub: %v", err)
+	}
+	if err := sh.Run("docker", "push", "docker.pkg.github.com/ullaakut/cameradar/cameradar:latest"); err != nil {
+		return term.FailStepf("unable to push latest docker images to docker hub: %v", err)
+	}
+
+	if version, exists := os.LookupEnv("CAMERADAR_VERSION"); exists {
+		term.Infoln("Pushing docker.pkg.github.com/ullaakut/cameradar/cameradar:"+version)
+		if err := sh.Run("docker", "tag", "ullaakut/cameradar:"+version, "docker.pkg.github.com/ullaakut/cameradar/cameradar:"+version); err != nil {
+			return term.FailStepf("unable to push latest docker images to docker hub: %v", err)
+		}
+		if err := sh.Run("docker", "push", "ullaakut/cameradar:"+version); err != nil {
+			return term.FailStepf("unable to push versionned docker images to docker hub: %v", err)
+		}
+	}
+
+	term.StartStep("Creating manifest(s) for cross platform builds")
+
+	var manifestImages []string
+	for _, image := range supportedPlatforms {
+		manifestImages = append(manifestImages, image)
+	}
+
+	args := []string{"manifest", "create", "--amend", "ullaakut/cameradar:latest"}
+	args = append(args, manifestImages...)
+
+	// docker manifest create ullaakut/cameradar:latest ullaakut/cameradar:amd64 ullaakut/cameradar:armv7 [...]
+	if err := sh.Run("docker", args...); err != nil {
+		return term.FailStepf("unable to create manifest: %v", err)
+	}
+
+	if version, exists := os.LookupEnv("CAMERADAR_VERSION"); exists {
+		args = []string{"manifest", "create", "--amend", "ullaakut/cameradar:"+version}
+		args = append(args, manifestImages...)
+
+		if err := sh.Run("docker", args...); err != nil {
+			return term.FailStepf("unable to create manifest: %v", err)
+		}
+	}
+	term.EndStep()
+
+	term.Infoln(style.Success("Images published successfully."))
+
+	return nil
+}

xml_models.go

@@ -1,50 +0,0 @@
-package cmrdr
-
-import "encoding/xml"
-
-// NmapResult is the structure that holds all the information from an NMap scan
-type nmapResult struct {
-	XMLName xml.Name `xml:"nmaprun"`
-	Hosts   []host   `xml:"host" validate:"required"`
-}
-
-// Host represents a host discovered during a scan
-type host struct {
-	XMLName   xml.Name  `xml:"host"`
-	Addresses []address `xml:"address"`
-	Ports     ports     `xml:"ports"`
-}
-
-// Address is a host's address discovered during a scan
-type address struct {
-	XMLName  xml.Name `xml:"address"`
-	Addr     string   `xml:"addr,attr"`
-	AddrType string   `xml:"addrtype,attr" validate:"required,eq=ipv4|eq=ipv6"`
-}
-
-// Ports is the list of openned ports on a host
-type ports struct {
-	XMLName xml.Name `xml:"ports"`
-	Ports   []port   `xml:"port"`
-}
-
-// Port is a port found on a host during a scan
-type port struct {
-	XMLName xml.Name `xml:"port"`
-	PortID  uint     `xml:"portid,attr"`
-	State   state    `xml:"state"`
-	Service service  `xml:"service"`
-}
-
-// State is the state of a port
-type state struct {
-	XMLName xml.Name `xml:"state"`
-	State   string   `xml:"state,attr" validate:"required,eq=open"`
-}
-
-// Service represents the service that a port provides
-type service struct {
-	XMLName xml.Name `xml:"service"`
-	Name    string   `xml:"name,attr" validate:"required,eq=rtsp"`
-	Product string   `xml:"product,attr"`
-}