Merge branch 'fix-z13-2025-1' into 'devel'

Fixes for Asus z13 2025

See merge request asus-linux/asusctl!245

CHANGELOG.md

@@ -7,6 +7,8 @@
 - Improve firmware attributes handling
 - Very good looking UI restyling from @shevchenko0013
 - Added support for GA402NV matrix: thanks @Ghoul4500
+- Fixed aura CLI interface
+- Fixed LEDs handling in rogcc
 
 ## [6.3.1]
 

asusctl/src/aura_cli.rs

@@ -312,6 +312,133 @@ pub struct TwoColourSpeed {
     pub zone: AuraZone,
 }
 
+/// Two-colour star effect (separate subcommand name)
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(subcommand, name = "stars", description = "two-colour star effect")]
+pub struct StarsTwoColour {
+    #[argh(option, description = "set the first RGB value e.g. ff00ff")]
+    pub colour: Colour,
+
+    #[argh(option, description = "set the second RGB value e.g. ff00ff")]
+    pub colour2: Colour,
+
+    #[argh(option, description = "set the speed: low, med, high")]
+    pub speed: Speed,
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+/// Rain effect (single-speed, separate subcommand name)
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "rain",
+    description = "single speed-based rain effect"
+)]
+pub struct RainSingleSpeed {
+    #[argh(option, description = "set the speed: low, med, high")]
+    pub speed: Speed,
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+/// Laser (single-colour with speed) separate subcommand
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "laser",
+    description = "single-colour effect with speed"
+)]
+pub struct LaserSingleColourSpeed {
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
+    pub colour: Colour,
+
+    #[argh(option, description = "set the speed: low, med, high")]
+    pub speed: Speed,
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+/// Ripple (single-colour with speed) separate subcommand
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(
+    subcommand,
+    name = "ripple",
+    description = "single-colour effect with speed"
+)]
+pub struct RippleSingleColourSpeed {
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
+    pub colour: Colour,
+
+    #[argh(option, description = "set the speed: low, med, high")]
+    pub speed: Speed,
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+/// Pulse / Comet / Flash variants (single-colour) separate subcommands
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(subcommand, name = "pulse", description = "single-colour pulse effect")]
+pub struct PulseSingleColour {
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
+    pub colour: Colour,
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(subcommand, name = "comet", description = "single-colour comet effect")]
+pub struct CometSingleColour {
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
+    pub colour: Colour,
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
+#[derive(FromArgs, Debug, Clone, Default)]
+#[argh(subcommand, name = "flash", description = "single-colour flash effect")]
+pub struct FlashSingleColour {
+    #[argh(option, short = 'c', description = "set the RGB value e.g. ff00ff")]
+    pub colour: Colour,
+
+    #[argh(
+        option,
+        default = "AuraZone::None",
+        description = "set the zone for this effect e.g. 0, 1, one, logo, lightbar-left"
+    )]
+    pub zone: AuraZone,
+}
+
 /// Multi-zone colour settings
 #[derive(FromArgs, Debug, Clone, Default)]
 #[allow(dead_code)]
@@ -359,14 +486,14 @@ pub enum SetAuraBuiltin {
     Breathe(TwoColourSpeed),           // 1
     RainbowCycle(SingleSpeed),         // 2
     RainbowWave(SingleSpeedDirection), // 3
-    Stars(TwoColourSpeed),             // 4
-    Rain(SingleSpeed),                 // 5
+    Stars(StarsTwoColour),             // 4
+    Rain(RainSingleSpeed),             // 5
     Highlight(SingleColourSpeed),      // 6
-    Laser(SingleColourSpeed),          // 7
-    Ripple(SingleColourSpeed),         // 8
-    Pulse(SingleColour),               // 10
-    Comet(SingleColour),               // 11
-    Flash(SingleColour),               // 12
+    Laser(LaserSingleColourSpeed),     // 7
+    Ripple(RippleSingleColourSpeed),   // 8
+    Pulse(PulseSingleColour),          // 10
+    Comet(CometSingleColour),          // 11
+    Flash(FlashSingleColour),          // 12
 }
 
 impl Default for SetAuraBuiltin {
@@ -428,6 +555,79 @@ impl From<&SingleSpeedDirection> for AuraEffect {
     }
 }
 
+impl From<&StarsTwoColour> for AuraEffect {
+    fn from(aura: &StarsTwoColour) -> Self {
+        Self {
+            colour1: aura.colour,
+            colour2: aura.colour2,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&RainSingleSpeed> for AuraEffect {
+    fn from(aura: &RainSingleSpeed) -> Self {
+        Self {
+            speed: aura.speed,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&LaserSingleColourSpeed> for AuraEffect {
+    fn from(aura: &LaserSingleColourSpeed) -> Self {
+        Self {
+            colour1: aura.colour,
+            speed: aura.speed,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&RippleSingleColourSpeed> for AuraEffect {
+    fn from(aura: &RippleSingleColourSpeed) -> Self {
+        Self {
+            colour1: aura.colour,
+            speed: aura.speed,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&PulseSingleColour> for AuraEffect {
+    fn from(aura: &PulseSingleColour) -> Self {
+        Self {
+            colour1: aura.colour,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&CometSingleColour> for AuraEffect {
+    fn from(aura: &CometSingleColour) -> Self {
+        Self {
+            colour1: aura.colour,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
+impl From<&FlashSingleColour> for AuraEffect {
+    fn from(aura: &FlashSingleColour) -> Self {
+        Self {
+            colour1: aura.colour,
+            zone: aura.zone,
+            ..Default::default()
+        }
+    }
+}
+
 impl From<&SetAuraBuiltin> for AuraEffect {
     fn from(aura: &SetAuraBuiltin) -> Self {
         match aura {

asusd/src/aura_laptop/config.rs

@@ -33,7 +33,6 @@ pub struct AuraConfig {
 }
 
 impl StdConfig for AuraConfig {
-    /// Detect the keyboard type and load from default DB if data available
     fn new() -> Self {
         panic!("This should not be used");
     }

asusd/src/aura_laptop/mod.rs

@@ -25,6 +25,30 @@ pub struct Aura {
 impl Aura {
     /// Initialise the device if required.
     pub async fn do_initialization(&self) -> Result<(), RogError> {
+        if let Some(hid) = &self.hid {
+            let hid = hid.lock().await;
+            let init_1: [u8; 2] = [
+                0x5d, 0xb9,
+            ];
+            let init_2 = b"]ASUS Tech.Inc.";
+            let init_3: [u8; 6] = [
+                0x5d, 0x05, 0x20, 0x31, 0, 0x1a,
+            ];
+
+            hid.write_bytes(&init_1)?;
+            hid.write_bytes(init_2)?;
+            hid.write_bytes(&init_3)?;
+
+            let config = self.config.lock().await;
+            if config.support_data.device_name.contains("GZ30")
+                || config.support_data.device_name.contains("Z13")
+            {
+                let z13_init: [u8; 4] = [
+                    0x5d, 0xc0, 0x03, 0x01,
+                ];
+                hid.write_bytes(&z13_init)?;
+            }
+        }
         Ok(())
     }
 
@@ -152,9 +176,54 @@ impl Aura {
                 }
             }
 
-            let bytes = config.enabled.to_bytes(config.led_type);
+            let mut enabled = config.enabled.clone();
+            if config.support_data.device_name.contains("GZ30")
+                || config.support_data.device_name.contains("Z13")
+            {
+                let logo_state = enabled
+                    .states
+                    .iter()
+                    .find(|s| s.zone == PowerZones::Logo)
+                    .cloned();
+                if let Some(logo) = logo_state {
+                    let mut lid_found = false;
+                    let mut bar_found = false;
+
+                    for s in enabled.states.iter_mut() {
+                        if s.zone == PowerZones::Lid {
+                            s.boot = logo.boot;
+                            s.awake = logo.awake;
+                            s.sleep = logo.sleep;
+                            s.shutdown = logo.shutdown;
+                            lid_found = true;
+                        }
+                        if s.zone == PowerZones::Lightbar {
+                            s.boot = logo.boot;
+                            s.awake = logo.awake;
+                            s.sleep = logo.sleep;
+                            s.shutdown = logo.shutdown;
+                            bar_found = true;
+                        }
+                    }
+
+                    if !lid_found {
+                        let mut new_state = logo;
+                        new_state.zone = PowerZones::Lid;
+                        enabled.states.push(new_state.clone());
+                        new_state.zone = PowerZones::Lightbar;
+                        enabled.states.push(new_state);
+                    } else if !bar_found {
+                        // Lid found but not bar?
+                        let mut new_state = logo;
+                        new_state.zone = PowerZones::Lightbar;
+                        enabled.states.push(new_state);
+                    }
+                }
+            }
+
+            let bytes = enabled.to_bytes(config.led_type);
             let msg = [
-                0x5d, 0xbd, 0x01, bytes[0], bytes[1], bytes[2], bytes[3],
+                0x5d, 0xbd, 0x01, bytes[0], bytes[1], bytes[2], bytes[3], 0xff,
             ];
             hid_raw.write_bytes(&msg)?;
         }

asusd/src/aura_laptop/trait_impls.rs

@@ -182,7 +182,6 @@ impl AuraZbus {
         self.0.set_brightness(config.brightness.into()).await?;
         config.set_builtin(effect);
         config.write();
-
         Ok(())
     }
 
@@ -208,9 +207,10 @@ impl AuraZbus {
         let mut config = self.0.config.lock().await;
         for opt in options.states {
             let zone = opt.zone;
-            for config in config.enabled.states.iter_mut() {
-                if config.zone == zone {
-                    *config = opt;
+            for state in config.enabled.states.iter_mut() {
+                if state.zone == zone {
+                    *state = opt;
+                    break;
                 }
             }
         }

asusd/src/aura_types.rs

@@ -196,6 +196,7 @@ impl DeviceHandle {
                 Some(Arc::new(Mutex::new(k)))
             });
 
+        // Load saved mode, colours, brightness, power from disk; apply on reload
         let mut config = AuraConfig::load_and_update_config(prod_id);
         config.led_type = aura_type;
         let aura = Aura {

rog-aura/data/aura_support.ron

@@ -125,7 +125,7 @@
         advanced_type: r#None,
         power_zones: [Keyboard],
     ),
-    ( 
+    (
         device_name: "FX607V",
         product_id: "",
         layout_name: "fa506i",
@@ -351,13 +351,13 @@
         power_zones: [Keyboard, Lightbar, Logo, RearGlow],
     ),
     (
-            device_name: "G635L",
-            product_id: "",
-            layout_name: "g635l-per-key",
-            basic_modes: [Static, Breathe, RainbowCycle, RainbowWave, Star, Rain, Highlight, Laser, Ripple, Pulse, Comet, Flash],
-            basic_zones: [],
-            advanced_type: PerKey,
-            power_zones: [Keyboard, Lightbar, Logo],
+        device_name: "G635L",
+        product_id: "",
+        layout_name: "g635l-per-key",
+        basic_modes: [Static, Breathe, RainbowCycle, RainbowWave, Star, Rain, Highlight, Laser, Ripple, Pulse, Comet, Flash],
+        basic_zones: [],
+        advanced_type: PerKey,
+        power_zones: [Keyboard, Lightbar, Logo],
     ),
     (
         device_name: "G712LI",
@@ -579,7 +579,7 @@
         device_name: "G835L",
         product_id: "",
         layout_name: "g814ji-per-key",
-        basic_modes: [Static, Breathe, RainbowCycle, RainbowWave, Star, Rain, Highlight, Laser, Ripple, Comet, Flash],
+        basic_modes: [Static, Breathe, RainbowCycle, RainbowWave, Star, Rain, Highlight, Laser, Ripple, Pulse, Comet, Flash],
         basic_zones: [],
         advanced_type: PerKey,
         power_zones: [Keyboard, Lightbar, Logo],
@@ -980,6 +980,24 @@
         advanced_type: r#None,
         power_zones: [Keyboard],
     ),
+    (
+        device_name: "GZ302",
+        product_id: "18c6",
+        layout_name: "",
+        basic_modes: [Static, Breathe, Pulse],
+        basic_zones: [],
+        advanced_type: r#None,
+        power_zones: [Logo],
+    ),
+    (
+        device_name: "GZ302",
+        product_id: "1a30",
+        layout_name: "ga401q",
+        basic_modes: [Static, Breathe, Pulse],
+        basic_zones: [],
+        advanced_type: r#None,
+        power_zones: [Keyboard],
+    ),
     (
         device_name: "RC71L",
         product_id: "",
@@ -998,4 +1016,4 @@
         advanced_type: r#None,
         power_zones: [Ally],
     ),
-])
+])

rog-aura/src/keyboard/power.rs

@@ -123,7 +123,8 @@ impl AuraPowerState {
                     | ((self.shutdown as u32) << 7)
             }
             PowerZones::Lightbar => {
-                ((self.boot as u32) << (7 + 2))
+                ((self.awake as u32) << (7 + 1))
+                    | ((self.boot as u32) << (7 + 2))
                     | ((self.awake as u32) << (7 + 3))
                     | ((self.sleep as u32) << (7 + 4))
                     | ((self.shutdown as u32) << (7 + 5))
@@ -133,12 +134,20 @@ impl AuraPowerState {
                     | ((self.awake as u32) << (15 + 2))
                     | ((self.sleep as u32) << (15 + 3))
                     | ((self.shutdown as u32) << (15 + 4))
+                    | ((self.boot as u32) << (15 + 5))
+                    | ((self.awake as u32) << (15 + 6))
+                    | ((self.sleep as u32) << (15 + 7))
+                    | ((self.shutdown as u32) << (15 + 8))
             }
             PowerZones::RearGlow => {
                 ((self.boot as u32) << (23 + 1))
                     | ((self.awake as u32) << (23 + 2))
                     | ((self.sleep as u32) << (23 + 3))
                     | ((self.shutdown as u32) << (23 + 4))
+                    | ((self.boot as u32) << (23 + 5))
+                    | ((self.awake as u32) << (23 + 6))
+                    | ((self.sleep as u32) << (23 + 7))
+                    | ((self.shutdown as u32) << (23 + 8))
             }
             PowerZones::None | PowerZones::KeyboardAndLightbar => 0,
         }
@@ -618,19 +627,19 @@ mod test {
         assert_eq!(shut_keyb_, "10000000, 00000000, 00000000, 00000000");
         //
         assert_eq!(boot_bar__, "00000000, 00000010, 00000000, 00000000");
-        assert_eq!(awake_bar_, "00000000, 00000100, 00000000, 00000000");
+        assert_eq!(awake_bar_, "00000000, 00000101, 00000000, 00000000");
         assert_eq!(sleep_bar_, "00000000, 00001000, 00000000, 00000000");
         assert_eq!(shut_bar__, "00000000, 00010000, 00000000, 00000000");
         //
-        assert_eq!(boot_lid__, "00000000, 00000000, 00000001, 00000000");
-        assert_eq!(awake_lid_, "00000000, 00000000, 00000010, 00000000");
-        assert_eq!(sleep_lid_, "00000000, 00000000, 00000100, 00000000");
-        assert_eq!(shut_lid__, "00000000, 00000000, 00001000, 00000000");
+        assert_eq!(boot_lid__, "00000000, 00000000, 00010001, 00000000");
+        assert_eq!(awake_lid_, "00000000, 00000000, 00100010, 00000000");
+        assert_eq!(sleep_lid_, "00000000, 00000000, 01000100, 00000000");
+        assert_eq!(shut_lid__, "00000000, 00000000, 10001000, 00000000");
         //
-        assert_eq!(boot_rear_, "00000000, 00000000, 00000000, 00000001");
-        assert_eq!(awake_rear, "00000000, 00000000, 00000000, 00000010");
-        assert_eq!(sleep_rear, "00000000, 00000000, 00000000, 00000100");
-        assert_eq!(shut_rear_, "00000000, 00000000, 00000000, 00001000");
+        assert_eq!(boot_rear_, "00000000, 00000000, 00000000, 00010001");
+        assert_eq!(awake_rear, "00000000, 00000000, 00000000, 00100010");
+        assert_eq!(sleep_rear, "00000000, 00000000, 00000000, 01000100");
+        assert_eq!(shut_rear_, "00000000, 00000000, 00000000, 10001000");
 
         // All on
         let byte1 = to_binary_string_post2021(&LaptopAuraPower {
@@ -657,6 +666,6 @@ mod test {
                 },
             ],
         });
-        assert_eq!(byte1, "11111111, 00011110, 00001111, 00001111");
+        assert_eq!(byte1, "11111111, 00011111, 11111111, 11111111");
     }
 }

rog-aura/src/lib.rs

@@ -106,10 +106,10 @@ impl From<&str> for AuraDeviceType {
         match s.to_lowercase().trim_start_matches("0x") {
             "tuf" => AuraDeviceType::LaptopKeyboardTuf,
             "1932" => AuraDeviceType::ScsiExtDisk,
-            "1866" | "18c6" | "1869" | "1854" => Self::LaptopKeyboardPre2021,
+            "1866" | "1869" | "1854" => Self::LaptopKeyboardPre2021,
             "1abe" | "1b4c" => Self::Ally,
             "19b3" | "193b" => Self::AnimeOrSlash,
-            "19b6" => Self::LaptopKeyboard2021,
+            "19b6" | "1a30" | "18c6" => Self::LaptopKeyboard2021,
             _ => Self::Unknown,
         }
     }

rog-control-center/src/main.rs

@@ -187,12 +187,18 @@ async fn main() -> Result<()> {
         slint::init_translations!(concat!(env!("CARGO_MANIFEST_DIR"), "/translations/"));
     }
 
+    // Prefetch supported Aura modes once at startup and move into the
+    // spawned UI thread so the UI uses a stable, immutable list.
+    let prefetched_supported: std::sync::Arc<Option<Vec<i32>>> = std::sync::Arc::new(
+        rog_control_center::ui::setup_aura::prefetch_supported_basic_modes().await,
+    );
+
     thread::spawn(move || {
         let mut state = AppState::StartingUp;
         loop {
             if is_rog_ally {
                 let config_copy_2 = config.clone();
-                let newui = setup_window(config.clone());
+                let newui = setup_window(config.clone(), prefetched_supported.clone());
                 newui.window().on_close_requested(move || {
                     exit(0);
                 });
@@ -233,6 +239,9 @@ async fn main() -> Result<()> {
 
                 let config_copy = config.clone();
                 let app_state_copy = app_state.clone();
+                // Avoid moving the original `prefetched_supported` into the
+                // closure — clone an Arc for the closure to capture.
+                let pref_for_invoke = prefetched_supported.clone();
                 slint::invoke_from_event_loop(move || {
                     UI.with(|ui| {
                         let app_state_copy = app_state_copy.clone();
@@ -247,7 +256,7 @@ async fn main() -> Result<()> {
                             });
                         } else {
                             let config_copy_2 = config_copy.clone();
-                            let newui = setup_window(config_copy);
+                            let newui = setup_window(config_copy, pref_for_invoke.clone());
                             newui.window().on_close_requested(move || {
                                 if let Ok(mut app_state) = app_state_copy.lock() {
                                     *app_state = AppState::MainWindowClosed;

rog-control-center/src/ui/mod.rs

@@ -3,7 +3,11 @@ pub mod setup_aura;
 pub mod setup_fans;
 pub mod setup_system;
 
+use std::sync::atomic::{AtomicU64, Ordering};
 use std::sync::{Arc, Mutex};
+use std::time::Duration;
+
+static TOAST_SEQ: AtomicU64 = AtomicU64::new(0);
 
 use config_traits::StdConfig;
 use log::warn;
@@ -70,19 +74,52 @@ pub fn show_toast(
     handle: Weak<MainWindow>,
     result: zbus::Result<()>,
 ) {
+    // bump sequence so that any previously spawned timers won't clear newer toasts
+    let seq = TOAST_SEQ.fetch_add(1, Ordering::SeqCst) + 1;
     match result {
         Ok(_) => {
-            slint::invoke_from_event_loop(move || handle.unwrap().invoke_show_toast(success)).ok()
+            let delayed_handle = handle.clone();
+            let delayed_text = success.clone();
+            slint::invoke_from_event_loop(move || handle.unwrap().invoke_show_toast(success)).ok();
+            tokio::spawn(async move {
+                tokio::time::sleep(Duration::from_secs(5)).await;
+                if TOAST_SEQ.load(Ordering::SeqCst) == seq {
+                    slint::invoke_from_event_loop(move || {
+                        delayed_handle
+                            .unwrap()
+                            .invoke_clear_toast_if_matches(delayed_text)
+                    })
+                    .ok();
+                }
+            });
+        }
+        Err(e) => {
+            let delayed_handle = handle.clone();
+            let delayed_text = fail.clone();
+            slint::invoke_from_event_loop(move || {
+                log::warn!("{fail}: {e}");
+                handle.unwrap().invoke_show_toast(fail)
+            })
+            .ok();
+            tokio::spawn(async move {
+                tokio::time::sleep(Duration::from_secs(5)).await;
+                if TOAST_SEQ.load(Ordering::SeqCst) == seq {
+                    slint::invoke_from_event_loop(move || {
+                        delayed_handle
+                            .unwrap()
+                            .invoke_clear_toast_if_matches(delayed_text)
+                    })
+                    .ok();
+                }
+            });
         }
-        Err(e) => slint::invoke_from_event_loop(move || {
-            log::warn!("{fail}: {e}");
-            handle.unwrap().invoke_show_toast(fail)
-        })
-        .ok(),
     };
 }
 
-pub fn setup_window(config: Arc<Mutex<Config>>) -> MainWindow {
+pub fn setup_window(
+    config: Arc<Mutex<Config>>,
+    prefetched_supported: std::sync::Arc<Option<Vec<i32>>>,
+) -> MainWindow {
     slint::set_xdg_app_id("rog-control-center")
         .map_err(|e| warn!("Couldn't set application ID: {e:?}"))
         .ok();
@@ -119,7 +156,7 @@ pub fn setup_window(config: Arc<Mutex<Config>>) -> MainWindow {
         setup_system_page_callbacks(&ui, config.clone());
     }
     if available.contains(&"xyz.ljones.Aura".to_string()) {
-        setup_aura_page(&ui, config.clone());
+        setup_aura_page(&ui, config.clone(), prefetched_supported.as_ref().clone());
     }
     if available.contains(&"xyz.ljones.Anime".to_string()) {
         setup_anime_page(&ui, config.clone());

rog-control-center/src/ui/setup_aura.rs

@@ -34,63 +34,103 @@ fn decode_hex(s: &str) -> RgbaColor<u8> {
     }
 }
 
-/// Returns the first available Aura interface
-// TODO: return all
 async fn find_aura_iface() -> Result<AuraProxy<'static>, Box<dyn std::error::Error>> {
     let conn = zbus::Connection::system().await?;
-    let f = zbus::fdo::ObjectManagerProxy::new(&conn, "xyz.ljones.Asusd", "/").await?;
-    let interfaces = f.get_managed_objects().await?;
-    let mut aura_paths = Vec::new();
-    for v in interfaces.iter() {
-        for k in v.1.keys() {
-            if k.as_str() == "xyz.ljones.Aura" {
-                println!("Found aura device at {}, {}", v.0, k);
-                aura_paths.push(v.0.clone());
-            }
-        }
+    let mgr = zbus::fdo::ObjectManagerProxy::new(&conn, "xyz.ljones.Asusd", "/").await?;
+    let objs = mgr.get_managed_objects().await?;
+    let mut paths: Vec<zbus::zvariant::OwnedObjectPath> = objs
+        .iter()
+        .filter(|(_, ifaces)| ifaces.keys().any(|k| k.as_str() == "xyz.ljones.Aura"))
+        .map(|(p, _)| p.clone())
+        .collect();
+    if paths.len() > 1 {
+        log::debug!("Multiple aura devices: {paths:?}");
     }
-    if aura_paths.len() > 1 {
-        println!("Multiple aura devices found: {aura_paths:?}");
-        println!("TODO: enable selection");
-    }
-    if let Some(path) = aura_paths.first() {
-        return Ok(AuraProxy::builder(&conn)
-            .path(path.clone())?
-            .destination("xyz.ljones.Asusd")?
-            .build()
-            .await?);
-    }
-
-    Err("No Aura interface".into())
+    let path = paths.pop().ok_or("No Aura interface")?;
+    AuraProxy::builder(&conn)
+        .path(path)?
+        .destination("xyz.ljones.Asusd")?
+        .build()
+        .await
+        .map_err(Into::into)
 }
 
-pub fn setup_aura_page(ui: &MainWindow, _states: Arc<Mutex<Config>>) {
-    ui.global::<AuraPageData>().on_cb_hex_from_colour(|c| {
+pub async fn prefetch_supported_basic_modes() -> Option<Vec<i32>> {
+    let proxy = find_aura_iface().await.ok()?;
+    let modes = proxy.supported_basic_modes().await.ok()?;
+    Some(modes.iter().map(|n| (*n).into()).collect())
+}
+
+pub fn setup_aura_page(
+    ui: &MainWindow,
+    _states: Arc<Mutex<Config>>,
+    prefetched_supported: Option<Vec<i32>>,
+) {
+    let g = ui.global::<AuraPageData>();
+    g.on_cb_hex_from_colour(|c| {
         format!("#{:02X}{:02X}{:02X}", c.red(), c.green(), c.blue()).into()
     });
-
-    ui.global::<AuraPageData>()
-        .on_cb_hex_to_colour(|s| decode_hex(s.as_str()).into());
+    g.on_cb_hex_to_colour(|s| decode_hex(s.as_str()).into());
 
     let handle = ui.as_weak();
     tokio::spawn(async move {
         let Ok(aura) = find_aura_iface().await else {
-            info!("This device appears to have no aura interfaces");
+            info!("No aura interfaces");
             return Ok::<(), zbus::Error>(());
         };
 
         set_ui_props_async!(handle, aura, AuraPageData, brightness);
-        set_ui_props_async!(handle, aura, AuraPageData, led_mode);
-        set_ui_props_async!(handle, aura, AuraPageData, led_mode_data);
         set_ui_props_async!(handle, aura, AuraPageData, led_power);
         set_ui_props_async!(handle, aura, AuraPageData, device_type);
 
+        let modes_vec: Vec<i32> = match prefetched_supported {
+            Some(p) => p,
+            None => aura
+                .supported_basic_modes()
+                .await
+                .ok()
+                .map(|m| m.iter().map(|n| (*n).into()).collect())
+                .unwrap_or_default(),
+        };
+
+        // Restore saved mode, colours, zone, speed, direction from asusd (persisted to disk).
+        // Use effect.mode as single source — avoid led_mode() which can fail (try_lock).
+        let restore = aura.led_mode_data().await.ok();
+        let raw_mode: Option<i32> = restore.as_ref().map(|d| d.mode.into());
+        let d_slint = restore.map(|d| d.into());
+        handle
+            .upgrade_in_event_loop(move |h| {
+                let names = h.global::<AuraPageData>().get_mode_names();
+                let mut raws = Vec::new();
+                let mut mode_names = Vec::new();
+                for (i, name) in names.iter().enumerate() {
+                    let raw = i as i32;
+                    if modes_vec.contains(&raw) && i != 9 {
+                        raws.push(raw);
+                        mode_names.push(name.clone());
+                    }
+                }
+                h.global::<AuraPageData>()
+                    .set_supported_basic_modes(raws.as_slice().into());
+                h.global::<AuraPageData>()
+                    .set_available_mode_names(mode_names.as_slice().into());
+                if let Some(d) = d_slint {
+                    h.global::<AuraPageData>().invoke_update_led_mode_data(d);
+                    if let Some(cm) = raw_mode {
+                        let idx = raws.iter().position(|&r| r == cm).unwrap_or(0) as i32;
+                        h.global::<AuraPageData>().set_current_available_mode(idx);
+                    }
+                    h.invoke_external_colour_change();
+                }
+            })
+            .map_err(|e| error!("{e}"))
+            .ok();
+
         if let Ok(mut pow3r) = aura.supported_power_zones().await {
-            let dev_type = aura
+            let dev = aura
                 .device_type()
                 .await
                 .unwrap_or(AuraDeviceType::LaptopKeyboard2021);
-            log::debug!("Available LED power modes {pow3r:?}");
             handle
                 .upgrade_in_event_loop(move |handle| {
                     let names: Vec<SharedString> = handle
@@ -98,135 +138,103 @@ pub fn setup_aura_page(ui: &MainWindow, _states: Arc<Mutex<Config>>) {
                         .get_power_zone_names()
                         .iter()
                         .collect();
-
-                    if dev_type.is_old_laptop() {
-                        // Need to add the specific KeyboardAndLightbar
+                    if dev.is_old_laptop() {
                         if pow3r.contains(&PowerZones::Keyboard)
                             && pow3r.contains(&PowerZones::Lightbar)
                         {
                             pow3r.push(PowerZones::KeyboardAndLightbar);
                         }
-                        let names: Vec<SharedString> =
-                            pow3r.iter().map(|n| names[(*n) as usize].clone()).collect();
+                        let n: Vec<SharedString> =
+                            pow3r.iter().map(|z| names[(*z) as usize].clone()).collect();
                         handle
                             .global::<AuraPageData>()
-                            .set_power_zone_names_old(names.as_slice().into());
+                            .set_power_zone_names_old(n.as_slice().into());
                     } else {
-                        let power: Vec<SlintPowerZones> =
-                            pow3r.iter().map(|p| (*p).into()).collect();
-
+                        let p: Vec<SlintPowerZones> = pow3r.iter().map(|z| (*z).into()).collect();
                         handle
                             .global::<AuraPageData>()
-                            .set_supported_power_zones(power.as_slice().into());
+                            .set_supported_power_zones(p.as_slice().into());
                     }
                 })
                 .ok();
         }
 
-        if let Ok(modes) = aura.supported_basic_modes().await {
-            log::debug!("Available LED modes {modes:?}");
-            handle
-                .upgrade_in_event_loop(move |handle| {
-                    let m: Vec<i32> = modes.iter().map(|n| (*n).into()).collect();
-                    handle
-                        .global::<AuraPageData>()
-                        .set_supported_basic_modes(m.as_slice().into());
-                    // Get the translated names
-                    let names = handle.global::<AuraPageData>().get_mode_names();
-
-                    let res: Vec<SharedString> = names
-                        .iter()
-                        .enumerate()
-                        .filter(|(n, _)| modes.contains(&(*n as i32).into()) && *n != 9)
-                        .map(|(_, i)| i)
-                        .collect();
-                    handle
-                        .global::<AuraPageData>()
-                        .set_available_mode_names(res.as_slice().into());
-                })
-                .map_err(|e| error!("{e:}"))
-                .ok();
-        }
-
-        let proxy_copy = aura.clone();
+        let proxy = aura.clone();
+        let weak = handle.clone();
         handle
-            .upgrade_in_event_loop(move |handle| {
-                set_ui_callbacks!(handle,
+            .upgrade_in_event_loop(move |h| {
+                set_ui_callbacks!(h,
                     AuraPageData(.into()),
-                    proxy_copy.brightness(.into()),
-                    "Keyboard LED brightness successfully set to {}",
-                    "Setting keyboard LED brightness failed"
+                    proxy.brightness(.into()),
+                    "Brightness set to {}",
+                    "Brightness failed"
                 );
 
-                set_ui_callbacks!(handle,
-                    AuraPageData(.into()),
-                    proxy_copy.led_mode(.into()),
-                    "Keyboard LED mode successfully set to {}",
-                    "Setting keyboard LEDmode failed"
-                );
-
-                set_ui_callbacks!(handle,
-                    AuraPageData(.into()),
-                    proxy_copy.led_mode_data(.into()),
-                    "Keyboard LED mode set to {:?}",
-                    "Setting keyboard LED mode failed"
-                );
-
-                // set_ui_callbacks!(handle,
-                //     AuraPageData(.clone().into()),
-                //     proxy_copy.led_power(.into()),
-                //     "Keyboard LED power successfully set to {:?}",
-                //     "Setting keyboard power failed"
-                // );
-
-                handle.invoke_external_colour_change();
-            })
-            .ok();
-
-        let handle_copy = handle.clone();
-        let proxy_copy = aura.clone();
-        handle
-            .upgrade_in_event_loop(|handle| {
-                handle
-                    .global::<AuraPageData>()
-                    .on_cb_led_power(move |power| {
-                        let handle_copy = handle_copy.clone();
-                        let proxy_copy = aura.clone();
-                        let power: LaptopAuraPower = power.into();
-                        tokio::spawn(async move {
-                            show_toast(
-                                "Aura power settings changed".into(),
-                                "Failed to set Aura power settings".into(),
-                                handle_copy,
-                                proxy_copy.set_led_power(power).await,
-                            );
-                        });
+                let p = proxy.clone();
+                let w = weak.clone();
+                h.global::<AuraPageData>().on_apply_led_mode_data(move || {
+                    let Some(ui) = w.upgrade() else { return };
+                    let slint_effect = ui.global::<AuraPageData>().get_led_mode_data();
+                    let raw: rog_aura::AuraEffect = slint_effect.into();
+                    let pp = p.clone();
+                    let t = w.clone();
+                    tokio::spawn(async move {
+                        let r = pp.set_led_mode_data(raw).await;
+                        show_toast("LED mode applied".into(), "LED mode failed".into(), t, r);
                     });
+                });
+                h.invoke_external_colour_change();
             })
-            .map_err(|e| error!("{e:}"))
             .ok();
 
-        // Need to update the UI if the mode changes
-        let handle_copy = handle.clone();
-        // spawn required since the while let never exits
+        let weak_power = handle.clone();
+        let proxy_power = aura.clone();
+        handle
+            .upgrade_in_event_loop(|h| {
+                h.global::<AuraPageData>().on_cb_led_power(move |power| {
+                    let w = weak_power.clone();
+                    let p = proxy_power.clone();
+                    let pw: LaptopAuraPower = power.into();
+                    tokio::spawn(async move {
+                        show_toast(
+                            "Aura power updated".into(),
+                            "Aura power failed".into(),
+                            w,
+                            p.set_led_power(pw).await,
+                        );
+                    });
+                });
+            })
+            .map_err(|e| error!("{e}"))
+            .ok();
+
+        let stream_handle = handle.clone();
+        let aura_stream = aura.clone();
         tokio::spawn(async move {
-            let mut x = proxy_copy.receive_led_mode_data_changed().await;
             use futures_util::StreamExt;
-            while let Some(e) = x.next().await {
+            let mut stream = aura_stream.receive_led_mode_data_changed().await;
+            while let Some(e) = stream.next().await {
                 if let Ok(out) = e.get().await {
-                    handle_copy
-                        .upgrade_in_event_loop(move |handle| {
-                            handle
+                    let raw: i32 = out.mode.into();
+                    let data = out.into();
+                    stream_handle
+                        .upgrade_in_event_loop(move |h| {
+                            h.global::<AuraPageData>().invoke_update_led_mode_data(data);
+                            let supported: Vec<i32> = h
                                 .global::<AuraPageData>()
-                                .invoke_update_led_mode_data(out.into());
-                            handle.invoke_external_colour_change();
+                                .get_supported_basic_modes()
+                                .iter()
+                                .collect();
+                            let idx = supported.iter().position(|&x| x == raw).unwrap_or(0) as i32;
+                            h.global::<AuraPageData>().set_current_available_mode(idx);
+                            h.invoke_external_colour_change();
                         })
-                        .map_err(|e| error!("{e:}"))
+                        .map_err(|e| error!("{e}"))
                         .ok();
                 }
             }
         });
-        debug!("Aura setup tasks complete");
+        debug!("Aura setup done");
         Ok(())
     });
 }

rog-control-center/ui/main_window.slint

@@ -43,6 +43,13 @@ export component MainWindow inherits Window {
         toast = text != "";
         toast_text = text;
     }
+    callback clear_toast_if_matches(string);
+    clear_toast_if_matches(text) => {
+        if (toast && toast_text == text) {
+            toast = false;
+            toast_text = "";
+        }
+    }
     callback exit-app();
     callback show_notification(bool);
     show_notification(yes) => {

rog-control-center/ui/pages/aura.slint

@@ -42,10 +42,14 @@ export component PageAura inherits Rectangle {
                     current_value: AuraPageData.available_mode_names[self.current-index];
                     model <=> AuraPageData.available_mode_names;
                     selected => {
-                        AuraPageData.led_mode_data.mode = AuraPageData.led_mode;
-                        AuraPageData.led_mode_data.mode = AuraPageData.current_available_mode;
-                        self.current_value = AuraPageData.available_mode_names[self.current-index];
-                        AuraPageData.cb_led_mode(AuraPageData.current_available_mode);
+                        AuraPageData.apply_effect({
+                            mode: AuraPageData.supported_basic_modes[self.current-index],
+                            zone: AuraPageData.led_mode_data.zone,
+                            colour1: AuraPageData.led_mode_data.colour1,
+                            colour2: AuraPageData.led_mode_data.colour2,
+                            speed: AuraPageData.led_mode_data.speed,
+                            direction: AuraPageData.led_mode_data.direction,
+                        });
                     }
                 }
             }
@@ -62,47 +66,44 @@ export component PageAura inherits Rectangle {
                             vertical-alignment: TextVerticalAlignment.center;
                             horizontal-alignment: TextHorizontalAlignment.center;
                         }
-
                         HorizontalBox {
                             c1 := ColourSlider {
-                                enabled: AuraPageData.led_mode == 0 || AuraPageData.led_mode == 1 || AuraPageData.led_mode == 4 || AuraPageData.led_mode == 6 || AuraPageData.led_mode == 7 || AuraPageData.led_mode == 8 || AuraPageData.led_mode == 10 || AuraPageData.led_mode == 11 || AuraPageData.led_mode == 12;
+                                enabled: AuraPageData.colour1_enabled;
                                 final_colour <=> AuraPageData.color1;
                                 colourbox <=> AuraPageData.colorbox1;
-                                set_hex_from_colour(c1) => {
-                                    return AuraPageData.cb_hex_from_colour(c1);
-                                }
-                                hex_to_colour(s) => {
-                                    return AuraPageData.cb_hex_to_colour(s);
-                                }
+                                set_hex_from_colour(c) => { return AuraPageData.cb_hex_from_colour(c); }
+                                hex_to_colour(s) => { return AuraPageData.cb_hex_to_colour(s); }
                                 released => {
-                                    AuraPageData.led_mode_data.colour1 = AuraPageData.color1;
-                                    AuraPageData.cb_led_mode_data(AuraPageData.led_mode_data);
+                                    AuraPageData.apply_effect({
+                                        mode: AuraPageData.led_mode_data.mode,
+                                        zone: AuraPageData.led_mode_data.zone,
+                                        colour1: AuraPageData.color1,
+                                        colour2: AuraPageData.led_mode_data.colour2,
+                                        speed: AuraPageData.led_mode_data.speed,
+                                        direction: AuraPageData.led_mode_data.direction,
+                                    });
                                 }
                             }
                         }
                     }
-
                     VerticalBox {
-                        Text {
-                            text: @tr("Colour 2");
-                            vertical-alignment: TextVerticalAlignment.center;
-                            horizontal-alignment: TextHorizontalAlignment.center;
-                        }
-
+                        Text { text: @tr("Colour 2"); vertical-alignment: TextVerticalAlignment.center; horizontal-alignment: TextHorizontalAlignment.center; }
                         HorizontalBox {
                             c2 := ColourSlider {
-                                enabled: AuraPageData.led_mode == 1 || AuraPageData.led_mode == 4;
+                                enabled: AuraPageData.colour2_enabled;
                                 final_colour <=> AuraPageData.color2;
                                 colourbox <=> AuraPageData.colorbox2;
-                                set_hex_from_colour(c1) => {
-                                    return AuraPageData.cb_hex_from_colour(c1);
-                                }
-                                hex_to_colour(s) => {
-                                    return AuraPageData.cb_hex_to_colour(s);
-                                }
+                                set_hex_from_colour(c) => { return AuraPageData.cb_hex_from_colour(c); }
+                                hex_to_colour(s) => { return AuraPageData.cb_hex_to_colour(s); }
                                 released => {
-                                    AuraPageData.led_mode_data.colour2 = AuraPageData.color2;
-                                    AuraPageData.cb_led_mode_data(AuraPageData.led_mode_data);
+                                    AuraPageData.apply_effect({
+                                        mode: AuraPageData.led_mode_data.mode,
+                                        zone: AuraPageData.led_mode_data.zone,
+                                        colour1: AuraPageData.led_mode_data.colour1,
+                                        colour2: AuraPageData.color2,
+                                        speed: AuraPageData.led_mode_data.speed,
+                                        direction: AuraPageData.led_mode_data.direction,
+                                    });
                                 }
                             }
                         }
@@ -116,63 +117,63 @@ export component PageAura inherits Rectangle {
                 max-height: 90px;
                 RogItem {
                     VerticalBox {
-                        Text {
-                            text: @tr("Zone");
-                            vertical-alignment: TextVerticalAlignment.center;
-                            horizontal-alignment: TextHorizontalAlignment.center;
-                        }
-
+                        Text { text: @tr("Zone"); vertical-alignment: TextVerticalAlignment.center; horizontal-alignment: TextHorizontalAlignment.center; }
                         ComboBox {
-                            // enabled: AuraPageData.led_mode == ;
-                        enabled: false;
+                            enabled: false;
                             current_index <=> AuraPageData.zone;
                             current_value: AuraPageData.zone_names[self.current-index];
                             model <=> AuraPageData.zone_names;
                             selected => {
-                                AuraPageData.led_mode_data.zone = self.current-index;
-                                AuraPageData.cb_led_mode_data(AuraPageData.led_mode_data);
+                                AuraPageData.apply_effect({
+                                    mode: AuraPageData.led_mode_data.mode,
+                                    zone: self.current-index,
+                                    colour1: AuraPageData.led_mode_data.colour1,
+                                    colour2: AuraPageData.led_mode_data.colour2,
+                                    speed: AuraPageData.led_mode_data.speed,
+                                    direction: AuraPageData.led_mode_data.direction,
+                                });
                             }
                         }
                     }
                 }
-
                 RogItem {
                     VerticalBox {
-                        Text {
-                            text: @tr("Direction");
-                            vertical-alignment: TextVerticalAlignment.center;
-                            horizontal-alignment: TextHorizontalAlignment.center;
-                        }
-
+                        Text { text: @tr("Direction"); vertical-alignment: TextVerticalAlignment.center; horizontal-alignment: TextHorizontalAlignment.center; }
                         ComboBox {
-                            enabled: AuraPageData.led_mode == 3;
+                            enabled: AuraPageData.direction_enabled;
                             current_index <=> AuraPageData.direction;
                             current_value: AuraPageData.direction_names[self.current-index];
                             model <=> AuraPageData.direction_names;
                             selected => {
-                                AuraPageData.led_mode_data.direction = self.current-index;
-                                AuraPageData.cb_led_mode_data(AuraPageData.led_mode_data);
+                                AuraPageData.apply_effect({
+                                    mode: AuraPageData.led_mode_data.mode,
+                                    zone: AuraPageData.led_mode_data.zone,
+                                    colour1: AuraPageData.led_mode_data.colour1,
+                                    colour2: AuraPageData.led_mode_data.colour2,
+                                    speed: AuraPageData.led_mode_data.speed,
+                                    direction: self.current-index,
+                                });
                             }
                         }
                     }
                 }
-
                 RogItem {
                     VerticalBox {
-                        Text {
-                            text: @tr("Speed");
-                            vertical-alignment: TextVerticalAlignment.center;
-                            horizontal-alignment: TextHorizontalAlignment.center;
-                        }
-
+                        Text { text: @tr("Speed"); vertical-alignment: TextVerticalAlignment.center; horizontal-alignment: TextHorizontalAlignment.center; }
                         ComboBox {
-                            enabled: AuraPageData.led_mode == 1 || AuraPageData.led_mode == 2 || AuraPageData.led_mode == 3 || AuraPageData.led_mode == 4 || AuraPageData.led_mode == 5 || AuraPageData.led_mode == 6 || AuraPageData.led_mode == 7 || AuraPageData.led_mode == 8;
+                            enabled: AuraPageData.speed_enabled;
                             current_index <=> AuraPageData.speed;
                             current_value: AuraPageData.speed_names[self.current-index];
                             model <=> AuraPageData.speed_names;
                             selected => {
-                                AuraPageData.led_mode_data.speed = self.current-index;
-                                AuraPageData.cb_led_mode_data(AuraPageData.led_mode_data);
+                                AuraPageData.apply_effect({
+                                    mode: AuraPageData.led_mode_data.mode,
+                                    zone: AuraPageData.led_mode_data.zone,
+                                    colour1: AuraPageData.led_mode_data.colour1,
+                                    colour2: AuraPageData.led_mode_data.colour2,
+                                    speed: self.current-index,
+                                    direction: AuraPageData.led_mode_data.direction,
+                                });
                             }
                         }
                     }

rog-control-center/ui/types/aura_types.slint

@@ -46,8 +46,10 @@ export struct LaptopAuraPower {
     states: [AuraPowerState],
 }
 
+// Modes with colour1: Static,Breathe,Star,Rain,Highlight,Laser,Ripple,Pulse,Comet,Flash (excl. Strobe,Rainbow,Nothing)
+// Modes with colour2: Breathe, Star only.
+// Speed: Breathe,Strobe,Rainbow,Star,Rain,Highlight,Laser,Ripple. Direction: Rainbow only.
 export global AuraPageData {
-    // The ordering must match the rog-aura crate
     in-out property <[string]> power_zone_names: [
         @tr("Aura power zone" => "Logo"),
         @tr("Aura power zone" => "Keyboard"),
@@ -87,15 +89,9 @@ export global AuraPageData {
         @tr("Basic aura mode" => "Comet"),
         @tr("Basic aura mode" => "Flash"),
     ];
-    in-out property <[string]> available_mode_names: [
-        @tr("Basic aura mode" => "Static"),
-        @tr("Basic aura mode" => "Breathe"),
-        @tr("Basic aura mode" => "Strobe"),
-    ];
+    in-out property <[string]> available_mode_names: [ @tr("Basic aura mode" => "Static"), @tr("Basic aura mode" => "Breathe"), @tr("Basic aura mode" => "Strobe") ];
     in-out property <int> current_available_mode: 0;
     in-out property <[int]> supported_basic_modes: [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 11, 12];
-    in-out property <int> led_mode;
-    callback cb_led_mode(int);
     in-out property <[string]> zone_names: [
         @tr("Aura zone" => "None"),
         @tr("Aura zone" => "Key1"),
@@ -106,51 +102,57 @@ export global AuraPageData {
         @tr("Aura zone" => "Lightbar Left"),
         @tr("Aura zone" => "Lightbar Right"),
     ];
-    in-out property <int> zone;
     in-out property <[string]> direction_names: [
         @tr("Aura direction" => "Right"),
         @tr("Aura direction" => "Left"),
         @tr("Aura direction" => "Up"),
         @tr("Aura direction" => "Down"),
     ];
-    in-out property <int> direction;
     in-out property <[string]> speed_names: [
         @tr("Aura speed" => "Low"),
         @tr("Aura speed" => "Medium"),
         @tr("Aura speed" => "High"),
     ];
-    in-out property <int> speed;
+
     in-out property <AuraEffect> led_mode_data: {
         mode: 0,
         zone: 0,
         colour1: Colors.aquamarine,
-        colourbox1: Colors.aquamarine,
         colour2: Colors.hotpink,
-        colourbox2: Colors.hotpink,
         speed: 0,
         direction: 0,
     };
-    callback cb_led_mode_data(AuraEffect);
     in-out property <color> color1;
     in-out property <brush> colorbox1;
     in-out property <color> color2;
     in-out property <brush> colorbox2;
+
+    out property <bool> colour1_enabled: led_mode_data.mode == 0 || led_mode_data.mode == 1 || led_mode_data.mode == 4 || led_mode_data.mode == 6 || led_mode_data.mode == 7 || led_mode_data.mode == 8 || led_mode_data.mode == 10 || led_mode_data.mode == 11 || led_mode_data.mode == 12;
+    out property <bool> colour2_enabled: led_mode_data.mode == 1 || led_mode_data.mode == 4;
+    out property <bool> speed_enabled: led_mode_data.mode == 1 || led_mode_data.mode == 2 || led_mode_data.mode == 3 || led_mode_data.mode == 4 || led_mode_data.mode == 5 || led_mode_data.mode == 6 || led_mode_data.mode == 7 || led_mode_data.mode == 8;
+    out property <bool> direction_enabled: led_mode_data.mode == 3;
+
+    callback apply_led_mode_data();
+    callback apply_effect(AuraEffect);
+    apply_effect(e) => { led_mode_data = e; apply_led_mode_data(); }
+    in-out property <int> zone;
+    in-out property <int> speed;
+    in-out property <int> direction;
+
     callback update_led_mode_data(AuraEffect);
-    update_led_mode_data(data) => {
-        led_mode_data = data;
-        current_available_mode = data.mode;
-        zone = data.zone;
-        speed = data.speed;
-        direction = data.direction;
-        color1 = data.colour1;
-        color2 = data.colour2;
-        colorbox1 = data.colour1;
-        colorbox2 = data.colour2;
+    update_led_mode_data(d) => {
+        led_mode_data = d;
+        zone = d.zone;
+        speed = d.speed;
+        direction = d.direction;
+        color1 = d.colour1;
+        color2 = d.colour2;
+        colorbox1 = d.colour1;
+        colorbox2 = d.colour2;
     }
     callback cb_hex_from_colour(color) -> string;
     callback cb_hex_to_colour(string) -> color;
     in-out property <AuraDevType> device_type: AuraDevType.Old;
-    // List of indexes to power_zone_names. Must correspond to rog-aura crate
     in-out property <[PowerZones]> supported_power_zones: [
         PowerZones.Keyboard,
         PowerZones.Lightbar,

rog-profiles/src/fan_curve_set.rs

@@ -162,7 +162,6 @@ impl CurveData {
     /// Write this curve to the device fan specified by `self.fan`
     pub fn write_to_device(&self, device: &mut Device) -> std::io::Result<()> {
         let pwm_num: char = self.fan.into();
-        let enable = if self.enabled { '1' } else { '2' };
 
         for (index, out) in self.pwm.iter().enumerate() {
             let pwm = pwm_str(pwm_num, index);
@@ -176,10 +175,20 @@ impl CurveData {
             device.set_attribute_value(&temp, out.to_string())?;
         }
 
-        // Enable must be done *after* all points are written pwm3_enable
+        // Note: pwm_enable is set by write_profile_curve_to_platform after all
+        // curves are written, because on some devices (e.g., ASUS Z13 2025)
+        // setting any pwm_enable to 2 resets ALL fan enables.
+        Ok(())
+    }
+
+    /// Set the enable state for this fan curve
+    pub fn set_enable(&self, device: &mut Device) -> std::io::Result<()> {
+        let pwm_num: char = self.fan.into();
+        let enable = if self.enabled { "1" } else { "2" };
+        let enable_attr = format!("pwm{pwm_num}_enable");
         device
-            .set_attribute_value(format!("pwm{pwm_num}_enable"), enable.to_string())
-            .map_err(|e| error!("Failed to set pwm{pwm_num}_enable to {enable}: {e:?}"))
+            .set_attribute_value(&enable_attr, enable.to_string())
+            .map_err(|e| error!("Failed to set {enable_attr} to {enable}: {e:?}"))
             .ok();
         Ok(())
     }

rog-profiles/src/lib.rs

@@ -181,15 +181,29 @@ impl FanCurveProfiles {
             PlatformProfile::Quiet | PlatformProfile::LowPower => &mut self.quiet,
             PlatformProfile::Custom => &mut self.custom,
         };
-        for fan in fans.iter().filter(|f| !f.enabled) {
-            debug!("write_profile_curve_to_platform: writing profile:{profile}, {fan:?}");
+
+        // First write all curve data (pwm/temp values) for all fans
+        for fan in fans.iter() {
+            debug!("write_profile_curve_to_platform: writing curve data for profile:{profile}, {fan:?}");
             fan.write_to_device(device)?;
         }
-        // Write enabled fans last because the kernel currently resets *all* if one is
-        // disabled
+
+        // Then set enables: disabled fans first, then enabled fans last.
+        // This order is important because on some devices (e.g., ASUS Z13 2025)
+        // setting any pwm_enable to 2 (disabled) resets ALL fan enables.
+        for fan in fans.iter().filter(|f| !f.enabled) {
+            debug!(
+                "write_profile_curve_to_platform: disabling fan for profile:{profile}, {:?}",
+                fan.fan
+            );
+            fan.set_enable(device)?;
+        }
         for fan in fans.iter().filter(|f| f.enabled) {
-            debug!("write_profile_curve_to_platform: writing profile:{profile}, {fan:?}");
-            fan.write_to_device(device)?;
+            debug!(
+                "write_profile_curve_to_platform: enabling fan for profile:{profile}, {:?}",
+                fan.fan
+            );
+            fan.set_enable(device)?;
         }
         Ok(())
     }