Prep 4.5.6 release

Closes #293

.gitignore

@@ -2,6 +2,7 @@
 vendor.tar.xz
 cargo-config
 .idea
+vendor
 vendor-*
 vendor_*
 .vscode-ctags

.gitlab-ci.yml

@@ -1,27 +1,62 @@
 image: rust:latest
 
+cache:
+  key: "$CI_JOB_NAME-$CI_COMMIT_REF_SLUG"
+  paths:
+      # Don't include `incremental` to save space
+      # Debug
+      - target/debug/build/
+      - target/debug/deps/
+      - target/debug/.fingerprint/
+      - target/debug/.cargo-lock
+      - target/debug/df_storyteller
+      # Release
+      - target/release/build/
+      - target/release/deps/
+      - target/release/.fingerprint/
+      - target/release/.cargo-lock
+
 before_script:
-  - apt-get update -qq && apt-get install -y -qq libudev-dev libgtk-3-dev
+  - apt-get update -qq && apt-get install -y -qq libudev-dev libgtk-3-dev grep
 
 stages:
+    - format
+    - check
     - test
-    - build
+    - release
 
-test:
+format:
+  except:
+    - tags
+  script:
+    - echo "nightly" > rust-toolchain
+    - rustup component add rustfmt
+    - cargo fmt --check
+
+check:
+  except:
+    - tags
   script:
     - rustup component add clippy
     - cargo check
-    - cargo clippy
+    # deny currently catches too much
+    #- cargo install cargo-deny && cargo deny
+    - cargo install cargo-cranky && cargo cranky
+
+test:
+  except:
+    - tags
+  script:
     - cargo test
 
-build:
+release:
   only:
-    - main
+    - tags
   script:
     - make && make vendor
   artifacts:
     paths:
-    - vendor_asus-nb-ctrl_*.tar.xz
+    - vendor_asusctl_*.tar.xz
     - cargo-config
 
 variables:

CHANGELOG.md

@@ -5,6 +5,41 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
 ## [Unreleased]
+## [v4.5.6]
+### Changed
+- Fix tasks not always running correctly on boot/sleep/wake/shutdown by finishing the move to async
+- Change how the profile/fan change task monitors changes due to TUF laptops behaving slightly different
+- ROGCC: Better handle the use of GPU MUX without supergfxd
+- ROGCC: Track if reboot required when not using supergfxd
+- Add env var for logging levels to daemon and gui (`RUST_LOG=<error|warn|info|debug|trace>`)
+- ROGCC: Very basic support for running a command on AC/Battery switching, this is in config at `~/.config/rog/rog-control-center.cfg`, and for now must be edited by hand and ROGCC restarted (run ROGCC in BG to use effectively)
+  + Run ROGCC from terminal to see errors of the AC/Battery command
+  + Support for editing via ROGCC GUI will come in future
+  + This is ideal for userspace tasks
+- asusd: Very basic support for running a command on AC/Battery switching, this is in config at `/etc/asusd/asusd.conf`. A restart of asusd is not required if edited.
+  + This is ideal for tasks that require root access (BE SAFE!)
+- The above AC/Battery commands are probably best set to run a script for more complex tasks
+- asusd: check if nvidia-powerd enabled before toggling
+        
+## [v4.5.5]
+### Changed
+- remove an unwrap() causing panic on main ROGCC thread
+
+## [v4.5.4]
+### Changed
+- ROGCC:: Allow ROGCC to run without supergfxd
+- ROGCC: Tray/notifs now reads dGPU status directly via supergfx crate (supergfxd not required)
+- Add rust-toolchain to force minimum rust version
+
+## [v4.5.3]
+### Changed
+- Adjust how fan graph in ROGCC works, deny incorrect graphs
+- Fix to apply the fan curve change in ROGCC to the correct profile
+- Support for G713RS LED modes (Author: Peter Ivanov)
+- Support for G713RM LED modes (Author: maxbachmann)
+- Fix VivoBook detection
+- Update dependencies to get latest winit crate (fixes various small issues)
+
 ## [v4.5.2]
 ### Changed
 - Update dependencies and bump version

Cargo.toml

@@ -2,14 +2,14 @@
 members = ["asusctl", "daemon", "daemon-user", "rog-platform", "rog-dbus", "rog-anime", "rog-aura", "rog-profiles", "rog-control-center"]
 
 [workspace.package]
-version = "4.5.2"
+version = "4.5.6"
 
 [workspace.dependencies]
 async-trait = "^0.1"
-tokio = { version = "^1.21.2", features = ["macros", "rt-multi-thread", "time", "sync"]}
+tokio = { version = "^1.22.0", features = ["macros", "rt-multi-thread", "time", "sync"]}
 concat-idents = "^1.1"
 dirs = "^4.0"
-smol = "^1.2"
+smol = "^1.3"
 
 zbus = "^3.5"
 logind-zbus = { version = "^3.0.3" } #, default-features = false, features = ["non_blocking"] }
@@ -20,19 +20,19 @@ serde_json = "^1.0"
 toml = "^0.5.9"
 
 log = "^0.4"
-env_logger = "^0.9.3"
+env_logger = "^0.10.0"
 
 glam = { version = "^0.22", features = ["serde"] }
 gumdrop = "^0.8"
-udev = "^0.6"
+udev = "^0.7"
 rusb = "^0.9"
-sysfs-class = "^0.1.2"
+sysfs-class = "^0.1.3"
 inotify = "^0.10.0"
 
 png_pong = "^0.8"
 pix = "^0.13"
-tinybmp = "^0.3"
-gif = "^0.11"
+tinybmp = "^0.4.0"
+gif = "^0.12.0"
 
 notify-rust = { git = "https://github.com/flukejones/notify-rust.git", default-features = false, features = ["z"] }
 

Cranky.toml

@@ -0,0 +1,121 @@
+# https://github.com/ericseppanen/cargo-cranky
+# cargo install cargo-cranky && cargo cranky
+
+warn = [
+  "clippy::all",
+  "clippy::await_holding_lock",
+  "clippy::bool_to_int_with_if",
+  "clippy::char_lit_as_u8",
+  "clippy::checked_conversions",
+  "clippy::dbg_macro",
+  "clippy::debug_assert_with_mut_call",
+  "clippy::disallowed_methods",
+  "clippy::disallowed_script_idents",
+  "clippy::doc_link_with_quotes",
+  "clippy::doc_markdown",
+  "clippy::empty_enum",
+  "clippy::enum_glob_use",
+  "clippy::equatable_if_let",
+  "clippy::exit",
+  "clippy::expl_impl_clone_on_copy",
+  "clippy::explicit_deref_methods",
+  "clippy::explicit_into_iter_loop",
+  "clippy::explicit_iter_loop",
+  "clippy::fallible_impl_from",
+  "clippy::filter_map_next",
+  "clippy::flat_map_option",
+  "clippy::float_cmp_const",
+  "clippy::fn_params_excessive_bools",
+  "clippy::fn_to_numeric_cast_any",
+  "clippy::from_iter_instead_of_collect",
+  "clippy::if_let_mutex",
+  "clippy::implicit_clone",
+  "clippy::imprecise_flops",
+  "clippy::index_refutable_slice",
+  "clippy::inefficient_to_string",
+  "clippy::invalid_upcast_comparisons",
+  "clippy::iter_not_returning_iterator",
+  "clippy::iter_on_empty_collections",
+  "clippy::iter_on_single_items",
+  "clippy::large_digit_groups",
+  "clippy::large_stack_arrays",
+  "clippy::large_types_passed_by_value",
+  "clippy::let_unit_value",
+  "clippy::linkedlist",
+  "clippy::lossy_float_literal",
+  "clippy::macro_use_imports",
+  "clippy::manual_assert",
+  "clippy::manual_instant_elapsed",
+  "clippy::manual_ok_or",
+  "clippy::manual_string_new",
+  "clippy::map_err_ignore",
+  "clippy::map_flatten",
+  "clippy::map_unwrap_or",
+  "clippy::match_on_vec_items",
+  "clippy::match_same_arms",
+  "clippy::match_wild_err_arm",
+  "clippy::match_wildcard_for_single_variants",
+  "clippy::mem_forget",
+  "clippy::mismatched_target_os",
+  "clippy::mismatching_type_param_order",
+  "clippy::missing_enforced_import_renames",
+  # "clippy::missing_errors_doc",
+  "clippy::missing_safety_doc",
+  "clippy::mut_mut",
+  "clippy::mutex_integer",
+  "clippy::needless_borrow",
+  "clippy::needless_continue",
+  "clippy::needless_for_each",
+  "clippy::needless_pass_by_value",
+  "clippy::negative_feature_names",
+  "clippy::nonstandard_macro_braces",
+  "clippy::option_option",
+  "clippy::path_buf_push_overwrite",
+  "clippy::ptr_as_ptr",
+  "clippy::rc_mutex",
+  "clippy::ref_option_ref",
+  "clippy::rest_pat_in_fully_bound_structs",
+  "clippy::same_functions_in_if_condition",
+  "clippy::semicolon_if_nothing_returned",
+  "clippy::single_match_else",
+  "clippy::str_to_string",
+  "clippy::string_add_assign",
+  "clippy::string_add",
+  "clippy::string_lit_as_bytes",
+  "clippy::string_to_string",
+  "clippy::todo",
+  "clippy::trailing_empty_array",
+  "clippy::trait_duplication_in_bounds",
+  "clippy::unimplemented",
+  "clippy::unnecessary_wraps",
+  "clippy::unnested_or_patterns",
+  "clippy::unused_peekable",
+  "clippy::unused_rounding",
+  # "clippy::unused_self",
+  "clippy::useless_transmute",
+  "clippy::verbose_file_reads",
+  "clippy::zero_sized_map_values",
+  "elided_lifetimes_in_paths",
+  "future_incompatible",
+  "nonstandard_style",
+  "rust_2018_idioms",
+  "rust_2021_prelude_collisions",
+  "rustdoc::missing_crate_level_docs",
+  "semicolon_in_expressions_from_macros",
+  "trivial_numeric_casts",
+  "unused_extern_crates",
+  "unused_import_braces",
+  "unused_lifetimes",
+]
+
+allow = [
+  # TODO(emilk): enable more lints
+  "clippy::cloned_instead_of_copied",
+  "clippy::derive_partial_eq_without_eq",
+  "clippy::type_complexity",
+  "clippy::undocumented_unsafe_blocks",
+  "trivial_casts",
+  "unsafe_op_in_unsafe_fn",               # `unsafe_op_in_unsafe_fn` may become the default in future Rust versions: https://github.com/rust-lang/rust/issues/71668
+  "unused_qualifications",
+]
+

Makefile

@@ -1,4 +1,4 @@
-VERSION := $(shell grep -Pm1 'version = "(\d.\d.\d)"' daemon/Cargo.toml | cut -d'"' -f2)
+VERSION := $(shell /usr/bin/grep -Pm1 'version = "(\d.\d.\d)"' Cargo.toml | cut -d'"' -f2)
 
 INSTALL = install
 INSTALL_PROGRAM = ${INSTALL} -D -m 0755

asusctl/Cargo.toml

@@ -1,5 +1,6 @@
 [package]
 name = "asusctl"
+license = "MPL-2.0"
 authors = ["Luke D Jones <luke@ljones.dev>"]
 edition = "2021"
 version.workspace = true

asusctl/examples/anime-diag.rs

@@ -20,7 +20,7 @@ fn main() {
         }
 
         for c in (0..35).into_iter().step_by(step) {
-            for i in matrix.get_mut()[c].iter_mut() {
+            for i in &mut matrix.get_mut()[c] {
                 *i = 50;
             }
         }

asusctl/examples/anime-grid.rs

@@ -17,7 +17,6 @@ fn main() {
     for (y, row) in tmp.iter_mut().enumerate() {
         if y % 2 == 0 && i + 1 != row.len() - 1 {
             i += 1;
-            dbg!(i);
         }
         row[row.len() - i] = 0x22;
         if i > 5 {

asusctl/examples/anime-spinning.rs

@@ -35,7 +35,7 @@ fn main() -> Result<(), Box<dyn Error>> {
     loop {
         matrix.angle += 0.05;
         if matrix.angle > PI * 2.0 {
-            matrix.angle = 0.0
+            matrix.angle = 0.0;
         }
         matrix.update();
 

asusctl/examples/aura-rgb-ball.rs

@@ -6,17 +6,17 @@ use rog_aura::{
     KeyColourArray,
 };
 use rog_dbus::RogDbusClientBlocking;
-use std::collections::LinkedList;
+use std::collections::VecDeque;
 
 #[derive(Debug, Clone)]
 struct Ball {
     position: (f32, f32),
     direction: (f32, f32),
-    trail: LinkedList<(f32, f32)>,
+    trail: VecDeque<(f32, f32)>,
 }
 impl Ball {
     fn new(x: f32, y: f32, trail_len: u32) -> Self {
-        let mut trail = LinkedList::new();
+        let mut trail = VecDeque::new();
         for _ in 1..=trail_len {
             trail.push_back((x, y));
         }

asusctl/src/aura_cli.rs

@@ -105,7 +105,7 @@ impl ToString for LedBrightness {
             Some(0x02) => "high",
             _ => "unknown",
         };
-        s.to_string()
+        s.to_owned()
     }
 }
 

asusctl/src/main.rs

@@ -26,7 +26,7 @@ mod aura_cli;
 mod cli_opts;
 mod profiles_cli;
 
-fn main() -> Result<(), Box<dyn std::error::Error>> {
+fn main() {
     let args: Vec<String> = args().skip(1).collect();
 
     let missing_argument_k = gumdrop::Error::missing_argument(Opt::Short('k'));
@@ -44,7 +44,7 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
 
     let (dbus, _) = RogDbusClientBlocking::new()
         .map_err(|e| {
-            print_error_help(Box::new(e), None);
+            print_error_help(&e, None);
             std::process::exit(3);
         })
         .unwrap();
@@ -54,7 +54,7 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
         .supported()
         .supported_functions()
         .map_err(|e| {
-            print_error_help(Box::new(e), None);
+            print_error_help(&e, None);
             std::process::exit(4);
         })
         .unwrap();
@@ -63,17 +63,14 @@ fn main() -> Result<(), Box<dyn std::error::Error>> {
         print_versions();
         println!();
         print_laptop_info();
-        return Ok(());
     }
 
     if let Err(err) = do_parsed(&parsed, &supported, &dbus) {
-        print_error_help(err, Some(&supported));
+        print_error_help(&*err, Some(&supported));
     }
-
-    Ok(())
 }
 
-fn print_error_help(err: Box<dyn std::error::Error>, supported: Option<&SupportedFunctions>) {
+fn print_error_help(err: &dyn std::error::Error, supported: Option<&SupportedFunctions>) {
     check_service("asusd");
     println!("\nError: {}\n", err);
     print_versions();
@@ -126,7 +123,7 @@ fn check_service(name: &str) -> bool {
 fn do_parsed(
     parsed: &CliStart,
     supported: &SupportedFunctions,
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
 ) -> Result<(), Box<dyn std::error::Error>> {
     match &parsed.command {
         Some(CliCommand::LedMode(mode)) => handle_led_mode(dbus, &supported.keyboard_led, mode)?,
@@ -134,9 +131,9 @@ fn do_parsed(
         Some(CliCommand::LedPow2(pow)) => handle_led_power2(dbus, &supported.keyboard_led, pow)?,
         Some(CliCommand::Profile(cmd)) => handle_profile(dbus, &supported.platform_profile, cmd)?,
         Some(CliCommand::FanCurve(cmd)) => {
-            handle_fan_curve(dbus, &supported.platform_profile, cmd)?
+            handle_fan_curve(dbus, &supported.platform_profile, cmd)?;
         }
-        Some(CliCommand::Graphics(_)) => do_gfx()?,
+        Some(CliCommand::Graphics(_)) => do_gfx(),
         Some(CliCommand::Anime(cmd)) => handle_anime(dbus, &supported.anime_ctrl, cmd)?,
         Some(CliCommand::Bios(cmd)) => handle_bios_option(dbus, &supported.rog_bios_ctrl, cmd)?,
         None => {
@@ -150,7 +147,7 @@ fn do_parsed(
                 println!("{}", CliStart::usage());
                 println!();
                 if let Some(cmdlist) = CliStart::command_list() {
-                    let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
+                    let commands: Vec<String> = cmdlist.lines().map(|s| s.to_owned()).collect();
                     for command in commands.iter().filter(|command| {
                         if !matches!(
                             supported.keyboard_led.prod_id,
@@ -214,14 +211,13 @@ fn do_parsed(
     Ok(())
 }
 
-fn do_gfx() -> Result<(), Box<dyn std::error::Error>> {
+fn do_gfx() {
     println!("Please use supergfxctl for graphics switching. supergfxctl is the result of making asusctl graphics switching generic so all laptops can use it");
     println!("This command will be removed in future");
-    Ok(())
 }
 
 fn handle_anime(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     _supported: &AnimeSupportedFunctions,
     cmd: &AnimeCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -237,14 +233,14 @@ fn handle_anime(
         }
     }
     if let Some(anime_turn) = cmd.enable {
-        dbus.proxies().anime().set_on_off(anime_turn)?
+        dbus.proxies().anime().set_on_off(anime_turn)?;
     }
     if let Some(anime_boot) = cmd.boot_enable {
-        dbus.proxies().anime().set_boot_on_off(anime_boot)?
+        dbus.proxies().anime().set_boot_on_off(anime_boot)?;
     }
     if let Some(bright) = cmd.brightness {
         verify_brightness(bright);
-        dbus.proxies().anime().set_brightness(bright)?
+        dbus.proxies().anime().set_brightness(bright)?;
     }
     if cmd.clear {
         let anime_type = get_anime_type()?;
@@ -381,7 +377,7 @@ fn verify_brightness(brightness: f32) {
 }
 
 fn handle_led_mode(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     supported: &LedSupportedFunctions,
     mode: &LedModeCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -438,7 +434,7 @@ fn handle_led_mode(
 }
 
 fn handle_led_power1(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     supported: &LedSupportedFunctions,
     power: &LedPowerCommand1,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -473,7 +469,7 @@ fn handle_led_power1(
 }
 
 fn handle_led_power_1_do_1866(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     power: &LedPowerCommand1,
 ) -> Result<(), Box<dyn std::error::Error>> {
     let mut enabled: Vec<AuraDev1866> = Vec::new();
@@ -513,7 +509,7 @@ fn handle_led_power_1_do_1866(
 }
 
 fn handle_led_power_1_do_tuf(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     power: &LedPowerCommand1,
 ) -> Result<(), Box<dyn std::error::Error>> {
     let mut enabled: Vec<AuraDevTuf> = Vec::new();
@@ -552,7 +548,7 @@ fn handle_led_power_1_do_tuf(
 }
 
 fn handle_led_power2(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     supported: &LedSupportedFunctions,
     power: &LedPowerCommand2,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -564,8 +560,8 @@ fn handle_led_power2(
         println!("Commands available");
 
         if let Some(cmdlist) = LedPowerCommand2::command_list() {
-            let commands: Vec<String> = cmdlist.lines().map(|s| s.to_string()).collect();
-            for command in commands.iter() {
+            let commands: Vec<String> = cmdlist.lines().map(|s| s.to_owned()).collect();
+            for command in &commands {
                 println!("{}", command);
             }
         }
@@ -581,7 +577,7 @@ fn handle_led_power2(
         }
 
         if supported.prod_id != AuraDevice::X19B6 {
-            println!("This option applies only to keyboards with product ID 0x19b6")
+            println!("This option applies only to keyboards with product ID 0x19b6");
         }
 
         let mut enabled: Vec<AuraDev19b6> = Vec::new();
@@ -646,7 +642,7 @@ fn handle_led_power2(
 }
 
 fn handle_profile(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     supported: &PlatformProfileFunctions,
     cmd: &ProfileCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -675,7 +671,9 @@ fn handle_profile(
 
     if cmd.list {
         let res = dbus.proxies().profile().profiles()?;
-        res.iter().for_each(|p| println!("{:?}", p));
+        for p in &res {
+            println!("{:?}", p);
+        }
     }
 
     if cmd.profile_get {
@@ -687,7 +685,7 @@ fn handle_profile(
 }
 
 fn handle_fan_curve(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     supported: &PlatformProfileFunctions,
     cmd: &FanCurveCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -749,7 +747,7 @@ fn handle_fan_curve(
 }
 
 fn handle_bios_option(
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     supported: &RogBiosSupportedFunctions,
     cmd: &BiosCommand,
 ) -> Result<(), Box<dyn std::error::Error>> {
@@ -764,10 +762,7 @@ fn handle_bios_option(
         {
             println!("Missing arg or command\n");
 
-            let usage: Vec<String> = BiosCommand::usage()
-                .lines()
-                .map(|s| s.to_string())
-                .collect();
+            let usage: Vec<String> = BiosCommand::usage().lines().map(|s| s.to_owned()).collect();
 
             for line in usage.iter().filter(|line| {
                 line.contains("sound") && supported.post_sound

daemon-user/Cargo.toml

@@ -1,5 +1,6 @@
 [package]
 name = "daemon-user"
+license = "MPL-2.0"
 version.workspace = true
 authors = ["Luke D Jones <luke@ljones.dev>"]
 edition = "2021"
@@ -27,4 +28,4 @@ rog_aura = { path = "../rog-aura" }
 rog_dbus = { path = "../rog-dbus" }
 rog_platform = { path = "../rog-platform" }
 
-zbus.workspace = true
+zbus.workspace = true

daemon-user/src/ctrl_anime.rs

@@ -103,7 +103,7 @@ impl<'a> CtrlAnimeInner<'static> {
                             .write(output)
                             .map_err(|e| AnimeError::Dbus(format!("{}", e)))
                             .map(|_| false)
-                    })?;
+                    });
                 }
                 ActionData::Image(image) => {
                     self.client
@@ -124,10 +124,10 @@ impl<'a> CtrlAnimeInner<'static> {
                         sleep(Duration::from_millis(1));
                     }
                 }
-                ActionData::AudioEq => {}
-                ActionData::SystemInfo => {}
-                ActionData::TimeDate => {}
-                ActionData::Matrix => {}
+                ActionData::AudioEq
+                | ActionData::SystemInfo
+                | ActionData::TimeDate
+                | ActionData::Matrix => {}
             }
         }
 
@@ -143,7 +143,7 @@ pub struct CtrlAnime<'a> {
     inner_early_return: Arc<AtomicBool>,
 }
 
-impl<'a> CtrlAnime<'static> {
+impl CtrlAnime<'static> {
     pub fn new(
         config: Arc<Mutex<UserAnimeConfig>>,
         inner: Arc<Mutex<CtrlAnimeInner<'static>>>,
@@ -185,7 +185,7 @@ impl CtrlAnime<'static> {
     pub fn insert_asus_gif(
         &mut self,
         index: u32,
-        file: String,
+        file: &str,
         time: Timer,
         brightness: f32,
     ) -> zbus::fdo::Result<String> {
@@ -223,7 +223,7 @@ impl CtrlAnime<'static> {
     pub fn insert_image_gif(
         &mut self,
         index: u32,
-        file: String,
+        file: &str,
         scale: f32,
         angle: f32,
         xy: (f32, f32),
@@ -269,7 +269,7 @@ impl CtrlAnime<'static> {
     pub fn insert_image(
         &mut self,
         index: u32,
-        file: String,
+        file: &str,
         scale: f32,
         angle: f32,
         xy: (f32, f32),

daemon-user/src/error.rs

@@ -13,7 +13,7 @@ pub enum Error {
 
 impl fmt::Display for Error {
     // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
             Error::Io(err) => write!(f, "Failed to open: {}", err),
             Error::ConfigLoadFail => write!(f, "Failed to load user config"),

daemon-user/src/user_config.rs

@@ -114,7 +114,7 @@ impl ConfigLoadSave<UserAnimeConfig> for UserAnimeConfig {
 impl Default for UserAnimeConfig {
     fn default() -> Self {
         Self {
-            name: "default".to_string(),
+            name: "default".to_owned(),
             anime: vec![
                 ActionLoader::AsusImage {
                     file: "/usr/share/asusd/anime/custom/diagonal-template.png".into(),
@@ -233,7 +233,7 @@ impl Default for UserAuraConfig {
         seq.push(key);
 
         Self {
-            name: "default".to_string(),
+            name: "default".to_owned(),
             aura: seq,
         }
     }
@@ -251,8 +251,8 @@ pub struct UserConfig {
 impl UserConfig {
     pub fn new() -> Self {
         Self {
-            active_anime: Some("anime-default".to_string()),
-            active_aura: Some("aura-default".to_string()),
+            active_anime: Some("anime-default".to_owned()),
+            active_aura: Some("aura-default".to_owned()),
         }
     }
 

daemon/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "daemon"
-version.workspace = true
 license = "MPL-2.0"
+version.workspace = true
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
 repository = "https://gitlab.com/asus-linux/asus-nb-ctrl"
@@ -43,4 +43,4 @@ toml.workspace = true
 # Device control
 sysfs-class.workspace = true # used for backlight control and baord ID
 
-concat-idents.workspace = true
+concat-idents.workspace = true

daemon/src/config.rs

@@ -7,11 +7,12 @@ use std::path::PathBuf;
 pub static CONFIG_PATH: &str = "/etc/asusd/asusd.conf";
 
 #[derive(Deserialize, Serialize, Default)]
-#[serde(default)]
 pub struct Config {
     /// Save charge limit for restoring on boot
     pub bat_charge_limit: u8,
     pub panel_od: bool,
+    pub ac_command: String,
+    pub bat_command: String,
 }
 
 impl Config {
@@ -19,6 +20,8 @@ impl Config {
         Config {
             bat_charge_limit: 100,
             panel_od: false,
+            ac_command: String::new(),
+            bat_command: String::new(),
         }
     }
 
@@ -37,12 +40,14 @@ impl Config {
                 config = Self::new();
             } else if let Ok(data) = serde_json::from_str(&buf) {
                 config = data;
+            } else if let Ok(data) = serde_json::from_str::<Config455>(&buf) {
+                config = data.into();
             } else {
                 warn!(
                     "Could not deserialise {}.\nWill rename to {}-old and recreate config",
                     CONFIG_PATH, CONFIG_PATH
                 );
-                let cfg_old = CONFIG_PATH.to_string() + "-old";
+                let cfg_old = CONFIG_PATH.to_owned() + "-old";
                 std::fs::rename(CONFIG_PATH, cfg_old).unwrap_or_else(|err| {
                     panic!(
                         "Could not rename. Please remove {} then restart service: Error {}",
@@ -52,7 +57,7 @@ impl Config {
                 config = Self::new();
             }
         } else {
-            config = Self::new()
+            config = Self::new();
         }
         config.write();
         config
@@ -81,3 +86,22 @@ impl Config {
             .unwrap_or_else(|err| error!("Could not write config: {}", err));
     }
 }
+
+#[derive(Deserialize, Serialize, Default)]
+#[serde(default)]
+pub struct Config455 {
+    /// Save charge limit for restoring on boot
+    pub bat_charge_limit: u8,
+    pub panel_od: bool,
+}
+
+impl From<Config455> for Config {
+    fn from(c: Config455) -> Self {
+        Self {
+            bat_charge_limit: c.bat_charge_limit,
+            panel_od: c.panel_od,
+            ac_command: String::new(),
+            bat_command: String::new(),
+        }
+    }
+}

daemon/src/ctrl_anime/config.rs

@@ -86,25 +86,25 @@ impl AnimeConfigCached {
         anime_type: AnimeType,
     ) -> Result<(), AnimeError> {
         let mut sys = Vec::with_capacity(config.system.len());
-        for ani in config.system.iter() {
+        for ani in &config.system {
             sys.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.system = sys;
 
         let mut boot = Vec::with_capacity(config.boot.len());
-        for ani in config.boot.iter() {
+        for ani in &config.boot {
             boot.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.boot = boot;
 
         let mut wake = Vec::with_capacity(config.wake.len());
-        for ani in config.wake.iter() {
+        for ani in &config.wake {
             wake.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.wake = wake;
 
         let mut shutdown = Vec::with_capacity(config.shutdown.len());
-        for ani in config.shutdown.iter() {
+        for ani in &config.shutdown {
             shutdown.push(ActionData::from_anime_action(anime_type, ani)?);
         }
         self.shutdown = shutdown;

daemon/src/ctrl_anime/mod.rs

@@ -1,5 +1,5 @@
 pub mod config;
-/// Implements CtrlTask, Reloadable, ZbusRun
+/// Implements `CtrlTask`, Reloadable, `ZbusRun`
 pub mod trait_impls;
 
 use self::config::{AnimeConfig, AnimeConfigCached};
@@ -62,7 +62,7 @@ impl CtrlAnime {
     /// one running - so the thread uses atomics to signal run/exit.
     ///
     /// Because this also writes to the usb device, other write tries (display only) *must*
-    /// get the mutex lock and set the thread_exit atomic.
+    /// get the mutex lock and set the `thread_exit` atomic.
     fn run_thread(inner: Arc<Mutex<CtrlAnime>>, actions: Vec<ActionData>, mut once: bool) {
         if actions.is_empty() {
             warn!("AniMe system actions was empty");
@@ -106,13 +106,13 @@ impl CtrlAnime {
 
                 'main: loop {
                     thread_running.store(true, Ordering::SeqCst);
-                    for action in actions.iter() {
+                    for action in &actions {
                         if thread_exit.load(Ordering::SeqCst) {
                             break 'main;
                         }
                         match action {
                             ActionData::Animation(frames) => {
-                                if let Err(err) = rog_anime::run_animation(frames, &|frame| {
+                                rog_anime::run_animation(frames, &|frame| {
                                     if thread_exit.load(Ordering::Acquire) {
                                         info!("rog-anime: frame-loop was asked to exit");
                                         return Ok(true); // Do safe exit
@@ -130,15 +130,14 @@ impl CtrlAnime {
                                                 .ok();
                                             false // Don't exit yet
                                         })
-                                        .map(Ok)
-                                        .unwrap_or_else(|| {
-                                            warn!("rog_anime::run_animation:callback failed");
-                                            Err(AnimeError::NoFrames)
-                                        })
-                                }) {
-                                    warn!("rog_anime::run_animation:Animation {}", err);
-                                    break 'main;
-                                };
+                                        .map_or_else(
+                                            || {
+                                                warn!("rog_anime::run_animation:callback failed");
+                                                Err(AnimeError::NoFrames)
+                                            },
+                                            Ok,
+                                        )
+                                });
                             }
                             ActionData::Image(image) => {
                                 once = false;
@@ -149,10 +148,10 @@ impl CtrlAnime {
                                 }
                             }
                             ActionData::Pause(duration) => sleep(*duration),
-                            ActionData::AudioEq => {}
-                            ActionData::SystemInfo => {}
-                            ActionData::TimeDate => {}
-                            ActionData::Matrix => {}
+                            ActionData::AudioEq
+                            | ActionData::SystemInfo
+                            | ActionData::TimeDate
+                            | ActionData::Matrix => {}
                         }
                     }
                     if thread_exit.load(Ordering::SeqCst) {
@@ -194,7 +193,7 @@ impl CtrlAnime {
             *led = bright as u8;
         }
         let data = AnimePacketType::try_from(buffer)?;
-        for row in data.iter() {
+        for row in &data {
             self.node.write_bytes(row)?;
         }
         self.node.write_bytes(&pkt_for_flush())?;

daemon/src/ctrl_anime/trait_impls.rs

@@ -47,7 +47,7 @@ impl CtrlAnimeZbus {
         let mut lock = self.0.lock().await;
         let mut bright = bright;
         if bright < 0.0 {
-            bright = 0.0
+            bright = 0.0;
         } else if bright > 1.0 {
             bright = 1.0;
         }
@@ -149,7 +149,7 @@ impl crate::CtrlTask for CtrlAnimeZbus {
 
     async fn create_tasks(&self, _: SignalContext<'static>) -> Result<(), RogError> {
         let run_action =
-            |start: bool, lock: MutexGuard<CtrlAnime>, inner: Arc<Mutex<CtrlAnime>>| {
+            |start: bool, lock: MutexGuard<'_, CtrlAnime>, inner: Arc<Mutex<CtrlAnime>>| {
                 if start {
                     info!("CtrlAnimeTask running sleep animation");
                     CtrlAnime::run_thread(inner, lock.cache.shutdown.clone(), true);
@@ -166,28 +166,32 @@ impl crate::CtrlTask for CtrlAnimeZbus {
         self.create_sys_event_tasks(
             // Loop is required to try an attempt to get the mutex *without* blocking
             // other threads - it is possible to end up with deadlocks otherwise.
-            move || loop {
-                if let Some(lock) = inner1.try_lock() {
+            move || {
+                let inner1 = inner1.clone();
+                async move {
+                    let lock = inner1.lock().await;
                     run_action(true, lock, inner1.clone());
-                    break;
                 }
             },
-            move || loop {
-                if let Some(lock) = inner2.try_lock() {
-                    run_action(false, lock, inner2.clone());
-                    break;
+            move || {
+                let inner2 = inner2.clone();
+                async move {
+                    let lock = inner2.lock().await;
+                    run_action(true, lock, inner2.clone());
                 }
             },
-            move || loop {
-                if let Some(lock) = inner3.try_lock() {
+            move || {
+                let inner3 = inner3.clone();
+                async move {
+                    let lock = inner3.lock().await;
                     run_action(true, lock, inner3.clone());
-                    break;
                 }
             },
-            move || loop {
-                if let Some(lock) = inner4.try_lock() {
-                    run_action(false, lock, inner4.clone());
-                    break;
+            move || {
+                let inner4 = inner4.clone();
+                async move {
+                    let lock = inner4.lock().await;
+                    run_action(true, lock, inner4.clone());
                 }
             },
         )

daemon/src/ctrl_aura/config.rs

@@ -127,7 +127,7 @@ pub struct AuraConfig {
 impl Default for AuraConfig {
     fn default() -> Self {
         let mut prod_id = AuraDevice::Unknown;
-        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+        for prod in &ASUS_KEYBOARD_DEVICES {
             if HidRaw::new(prod).is_ok() {
                 prod_id = AuraDevice::from(*prod);
                 break;
@@ -242,7 +242,7 @@ impl AuraConfig {
                         colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
                         speed: Speed::Med,
                         direction: Direction::Left,
-                    })
+                    });
                 }
                 if let Some(m) = config.multizone.as_mut() {
                     m.insert(*n, default);
@@ -287,34 +287,31 @@ impl AuraConfig {
 
     /// Set the mode data, current mode, and if multizone enabled.
     ///
-    /// Multipurpose, will accept AuraEffect with zones and put in the correct store.
+    /// Multipurpose, will accept `AuraEffect` with zones and put in the correct store.
     pub fn set_builtin(&mut self, effect: AuraEffect) {
         self.current_mode = effect.mode;
-        match effect.zone() {
-            AuraZone::None => {
-                self.builtins.insert(*effect.mode(), effect);
-                self.multizone_on = false;
-            }
-            _ => {
-                if let Some(multi) = self.multizone.as_mut() {
-                    if let Some(fx) = multi.get_mut(effect.mode()) {
-                        for fx in fx.iter_mut() {
-                            if fx.zone == effect.zone {
-                                *fx = effect;
-                                return;
-                            }
+        if effect.zone() == AuraZone::None {
+            self.builtins.insert(*effect.mode(), effect);
+            self.multizone_on = false;
+        } else {
+            if let Some(multi) = self.multizone.as_mut() {
+                if let Some(fx) = multi.get_mut(effect.mode()) {
+                    for fx in fx.iter_mut() {
+                        if fx.zone == effect.zone {
+                            *fx = effect;
+                            return;
                         }
-                        fx.push(effect);
-                    } else {
-                        multi.insert(*effect.mode(), vec![effect]);
                     }
+                    fx.push(effect);
                 } else {
-                    let mut tmp = BTreeMap::new();
-                    tmp.insert(*effect.mode(), vec![effect]);
-                    self.multizone = Some(tmp);
+                    multi.insert(*effect.mode(), vec![effect]);
                 }
-                self.multizone_on = true;
+            } else {
+                let mut tmp = BTreeMap::new();
+                tmp.insert(*effect.mode(), vec![effect]);
+                self.multizone = Some(tmp);
             }
+            self.multizone_on = true;
         }
     }
 

daemon/src/ctrl_aura/controller.rs

@@ -26,7 +26,7 @@ impl GetSupported for CtrlKbdLed {
         let per_key_led_mode = laptop.per_key;
 
         let mut prod_id = AuraDevice::Unknown;
-        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+        for prod in &ASUS_KEYBOARD_DEVICES {
             if HidRaw::new(prod).is_ok() {
                 prod_id = AuraDevice::from(*prod);
                 break;
@@ -72,10 +72,10 @@ impl CtrlKbdLed {
     pub fn new(supported_modes: LaptopLedData, config: AuraConfig) -> Result<Self, RogError> {
         let mut led_prod = None;
         let mut led_node = None;
-        for prod in ASUS_KEYBOARD_DEVICES.iter() {
+        for prod in &ASUS_KEYBOARD_DEVICES {
             match HidRaw::new(prod) {
                 Ok(node) => {
-                    led_prod = Some(prod.to_string());
+                    led_prod = Some((*prod).to_owned());
                     led_node = Some(node);
                     info!("Looked for keyboard controller 0x{prod}: Found");
                     break;
@@ -335,7 +335,7 @@ impl CtrlKbdLed {
                 colour2: *GRADIENT.get(GRADIENT.len() - i).unwrap_or(&GRADIENT[6]),
                 speed: Speed::Med,
                 direction: Direction::Left,
-            })
+            });
         }
         if default.is_empty() {
             return Err(RogError::AuraEffectNotSupported);
@@ -370,7 +370,7 @@ mod tests {
         // Checking to ensure set_mode errors when unsupported modes are tried
         let config = AuraConfig::default();
         let supported_modes = LaptopLedData {
-            prod_family: "".into(),
+            prod_family: String::new(),
             board_names: vec![],
             standard: vec![AuraModeNum::Static],
             multizone: vec![],
@@ -432,7 +432,7 @@ mod tests {
         // Checking to ensure set_mode errors when unsupported modes are tried
         let config = AuraConfig::default();
         let supported_modes = LaptopLedData {
-            prod_family: "".into(),
+            prod_family: String::new(),
             board_names: vec![],
             standard: vec![AuraModeNum::Static],
             multizone: vec![],
@@ -470,7 +470,7 @@ mod tests {
         // Checking to ensure set_mode errors when unsupported modes are tried
         let config = AuraConfig::default();
         let supported_modes = LaptopLedData {
-            prod_family: "".into(),
+            prod_family: String::new(),
             board_names: vec![],
             standard: vec![AuraModeNum::Static],
             multizone: vec![AuraZone::Key1, AuraZone::Key2],

daemon/src/ctrl_aura/trait_impls.rs

@@ -237,7 +237,7 @@ impl CtrlTask for CtrlKbdLedZbus {
     }
 
     async fn create_tasks(&self, _: SignalContext<'static>) -> Result<(), RogError> {
-        let load_save = |start: bool, mut lock: MutexGuard<CtrlKbdLed>| {
+        let load_save = |start: bool, mut lock: MutexGuard<'_, CtrlKbdLed>| {
             // If waking up
             if !start {
                 info!("CtrlKbdLedTask reloading brightness and modes");
@@ -262,28 +262,32 @@ impl CtrlTask for CtrlKbdLedZbus {
         self.create_sys_event_tasks(
             // Loop so that we do aquire the lock but also don't block other
             // threads (prevents potential deadlocks)
-            move || loop {
-                if let Some(lock) = inner1.try_lock() {
+            move || {
+                let inner1 = inner1.clone();
+                async move {
+                    let lock = inner1.lock().await;
                     load_save(true, lock);
-                    break;
                 }
             },
-            move || loop {
-                if let Some(lock) = inner2.try_lock() {
+            move || {
+                let inner2 = inner2.clone();
+                async move {
+                    let lock = inner2.lock().await;
                     load_save(false, lock);
-                    break;
                 }
             },
-            move || loop {
-                if let Some(lock) = inner3.try_lock() {
-                    load_save(true, lock);
-                    break;
-                }
-            },
-            move || loop {
-                if let Some(lock) = inner4.try_lock() {
+            move || {
+                let inner3 = inner3.clone();
+                async move {
+                    let lock = inner3.lock().await;
+                    load_save(false, lock);
+                }
+            },
+            move || {
+                let inner4 = inner4.clone();
+                async move {
+                    let lock = inner4.lock().await;
                     load_save(false, lock);
-                    break;
                 }
             },
         )

daemon/src/ctrl_platform.rs

@@ -319,7 +319,8 @@ impl CtrlPlatform {
     task_watch_item!(panel_od platform);
     task_watch_item!(dgpu_disable platform);
     task_watch_item!(egpu_enable platform);
-    task_watch_item!(gpu_mux_mode platform);
+    // NOTE: see note further below
+    //task_watch_item!(gpu_mux_mode platform);
 }
 
 #[async_trait]
@@ -332,10 +333,12 @@ impl CtrlTask for CtrlPlatform {
         let platform1 = self.clone();
         let platform2 = self.clone();
         self.create_sys_event_tasks(
-            move || {},
+            move || async { {} },
             move || {
-                info!("CtrlRogBios reloading panel_od");
-                if let Some(lock) = platform1.config.try_lock() {
+                let platform1 = platform1.clone();
+                async move {
+                    info!("CtrlRogBios reloading panel_od");
+                    let lock = platform1.config.lock().await;
                     if platform1.platform.has_panel_od() {
                         platform1
                             .set_panel_overdrive(lock.panel_od)
@@ -347,10 +350,12 @@ impl CtrlTask for CtrlPlatform {
                     }
                 }
             },
-            move || {},
+            move || async { {} },
             move || {
-                info!("CtrlRogBios reloading panel_od");
-                if let Some(lock) = platform2.config.try_lock() {
+                let platform2 = platform2.clone();
+                async move {
+                    info!("CtrlRogBios reloading panel_od");
+                    let lock = platform2.config.lock().await;
                     if platform2.platform.has_panel_od() {
                         platform2
                             .set_panel_overdrive(lock.panel_od)
@@ -368,7 +373,9 @@ impl CtrlTask for CtrlPlatform {
         self.watch_panel_od(signal_ctxt.clone()).await?;
         self.watch_dgpu_disable(signal_ctxt.clone()).await?;
         self.watch_egpu_enable(signal_ctxt.clone()).await?;
-        self.watch_gpu_mux_mode(signal_ctxt.clone()).await?;
+        // NOTE: Can't have this as a watch because on a write to it, it reverts back to booted-with value
+        //  as it does not actually change until reboot.
+        //self.watch_gpu_mux_mode(signal_ctxt.clone()).await?;
 
         Ok(())
     }

daemon/src/ctrl_power.rs

@@ -1,10 +1,13 @@
-use crate::systemd::{do_systemd_unit_action, SystemdUnitAction};
+use crate::systemd::{
+    do_systemd_unit_action, is_systemd_unit_enabled, SystemdUnitAction, SystemdUnitState,
+};
 use crate::{config::Config, error::RogError, GetSupported};
 use crate::{task_watch_item, CtrlTask};
 use async_trait::async_trait;
-use log::{info, warn};
+use log::{error, info, warn};
 use rog_platform::power::AsusPower;
 use rog_platform::supported::ChargeSupportedFunctions;
+use std::process::Command;
 use std::sync::Arc;
 use std::time::Duration;
 use tokio::time::sleep;
@@ -155,10 +158,12 @@ impl CtrlTask for CtrlPower {
         let power1 = self.clone();
         let power2 = self.clone();
         self.create_sys_event_tasks(
-            move || {},
+            move || async {},
             move || {
-                info!("CtrlCharge reloading charge limit");
-                if let Some(lock) = power1.config.try_lock() {
+                let power1 = power1.clone();
+                async move {
+                    info!("CtrlCharge reloading charge limit");
+                    let lock = power1.config.lock().await;
                     power1
                         .set(lock.bat_charge_limit)
                         .map_err(|err| {
@@ -166,22 +171,18 @@ impl CtrlTask for CtrlPower {
                             err
                         })
                         .ok();
-                }
-                if let Ok(value) = power1.power.get_online() {
-                    let action = if value == 1 {
-                        SystemdUnitAction::Restart
-                    } else {
-                        SystemdUnitAction::Stop
-                    };
-                    if do_systemd_unit_action(action, NVIDIA_POWERD).is_ok() {
-                        info!("CtrlPower task: did {action:?} on {NVIDIA_POWERD}");
+
+                    if let Ok(value) = power1.power.get_online() {
+                        do_nvidia_powerd_action(value == 1);
                     }
                 }
             },
-            move || {},
+            move || async {},
             move || {
-                info!("CtrlCharge reloading charge limit");
-                if let Some(lock) = power2.config.try_lock() {
+                let power2 = power2.clone();
+                async move {
+                    info!("CtrlCharge reloading charge limit");
+                    let lock = power2.config.lock().await;
                     power2
                         .set(lock.bat_charge_limit)
                         .map_err(|err| {
@@ -189,21 +190,16 @@ impl CtrlTask for CtrlPower {
                             err
                         })
                         .ok();
-                }
-                if let Ok(value) = power2.power.get_online() {
-                    let action = if value == 1 {
-                        SystemdUnitAction::Restart
-                    } else {
-                        SystemdUnitAction::Stop
-                    };
-                    if do_systemd_unit_action(action, NVIDIA_POWERD).is_ok() {
-                        info!("CtrlPower task: did {action:?} on {NVIDIA_POWERD}");
+
+                    if let Ok(value) = power2.power.get_online() {
+                        do_nvidia_powerd_action(value == 1);
                     }
                 }
             },
         )
         .await;
 
+        let config = self.config.clone();
         self.watch_charge_control_end_threshold(signal_ctxt.clone())
             .await?;
 
@@ -214,18 +210,36 @@ impl CtrlTask for CtrlPower {
                 if let Ok(value) = ctrl.power.get_online() {
                     if online != value {
                         online = value;
-                        let action = if value == 1 {
-                            SystemdUnitAction::Restart
-                        } else {
-                            SystemdUnitAction::Stop
-                        };
-                        if do_systemd_unit_action(action, NVIDIA_POWERD).is_ok() {
-                            info!("CtrlPower task: did {action:?} on {NVIDIA_POWERD}");
-                        }
+                        do_nvidia_powerd_action(value == 1);
 
                         Self::notify_mains_online(&signal_ctxt, value == 1)
                             .await
                             .unwrap();
+
+                        let mut config = config.lock().await;
+                        config.read();
+                        let mut prog: Vec<&str> = Vec::new();
+                        if value == 1 {
+                            // AC ONLINE
+                            prog = config.ac_command.split_whitespace().collect();
+                        } else if value == 0 {
+                            // BATTERY
+                            prog = config.bat_command.split_whitespace().collect();
+                        }
+
+                        if prog.len() > 1 {
+                            let mut cmd = Command::new(prog[0]);
+                            for arg in prog.iter().skip(1) {
+                                cmd.arg(*arg);
+                            }
+                            if let Err(e) = cmd.spawn() {
+                                if value == 1 {
+                                    error!("AC power command error: {e}");
+                                } else {
+                                    error!("Battery power command error: {e}");
+                                }
+                            }
+                        }
                     }
                 }
                 // The inotify doesn't pick up events when the kernel changes internal value
@@ -237,3 +251,17 @@ impl CtrlTask for CtrlPower {
         Ok(())
     }
 }
+
+fn do_nvidia_powerd_action(ac_on: bool) {
+    let action = if ac_on {
+        SystemdUnitAction::Restart
+    } else {
+        SystemdUnitAction::Stop
+    };
+
+    if let Ok(res) = is_systemd_unit_enabled(SystemdUnitState::Enabled, NVIDIA_POWERD) {
+        if res && do_systemd_unit_action(action, NVIDIA_POWERD).is_ok() {
+            info!("CtrlPower task: did {action:?} on {NVIDIA_POWERD}");
+        }
+    }
+}

daemon/src/ctrl_profiles/config.rs

@@ -43,7 +43,8 @@ impl ProfileConfig {
                     "Could not deserialise {}.\nWill rename to {}-old and recreate config",
                     config_path, config_path
                 );
-                let cfg_old = config_path.clone() + "-old";
+                let mut cfg_old = config_path.clone();
+                cfg_old.push_str("-old");
                 std::fs::rename(config_path.clone(), cfg_old).unwrap_or_else(|err| {
                     panic!(
                         "Could not rename. Please remove {} then restart service: Error {}",

daemon/src/ctrl_profiles/mod.rs

@@ -1,4 +1,4 @@
 pub mod config;
 pub mod controller;
-/// Implements CtrlTask, Reloadable, ZbusRun
+/// Implements `CtrlTask`, Reloadable, `ZbusRun`
 pub mod trait_impls;

daemon/src/ctrl_profiles/trait_impls.rs

@@ -32,7 +32,7 @@ impl ProfileZbus {
             return Ok(profiles);
         }
         Err(Error::Failed(
-            "Failed to get all profile details".to_string(),
+            "Failed to get all profile details".to_owned(),
         ))
     }
 
@@ -85,9 +85,9 @@ impl ProfileZbus {
         let mut ctrl = self.0.lock().await;
         ctrl.config.read();
         if let Some(curves) = &ctrl.config.fan_curves {
-            return Ok(curves.get_enabled_curve_profiles().to_vec());
+            return Ok(curves.get_enabled_curve_profiles());
         }
-        Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+        Err(Error::Failed(UNSUPPORTED_MSG.to_owned()))
     }
 
     /// Set a profile fan curve enabled status. Will also activate a fan curve if in the
@@ -109,7 +109,7 @@ impl ProfileZbus {
             ctrl.save_config();
             Ok(())
         } else {
-            Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+            Err(Error::Failed(UNSUPPORTED_MSG.to_owned()))
         }
     }
 
@@ -121,7 +121,7 @@ impl ProfileZbus {
             let curve = curves.get_fan_curves_for(profile);
             return Ok(curve.clone());
         }
-        Err(Error::Failed(UNSUPPORTED_MSG.to_string()))
+        Err(Error::Failed(UNSUPPORTED_MSG.to_owned()))
     }
 
     /// Set the fan curve for the specified profile.
@@ -134,7 +134,7 @@ impl ProfileZbus {
                 .save_fan_curve(curve, profile)
                 .map_err(|err| zbus::fdo::Error::Failed(err.to_string()))?;
         } else {
-            return Err(Error::Failed(UNSUPPORTED_MSG.to_string()));
+            return Err(Error::Failed(UNSUPPORTED_MSG.to_owned()));
         }
         ctrl.write_profile_curve_to_platform()
             .map_err(|e| warn!("Profile::set_profile, {}", e))
@@ -200,8 +200,36 @@ impl CtrlTask for ProfileZbus {
     }
 
     async fn create_tasks(&self, signal_ctxt: SignalContext<'static>) -> Result<(), RogError> {
+        // let ctrl = self.0.clone();
+        // let mut watch = self.0.lock().await.platform.monitor_platform_profile()?;
+        // let sig_ctx = signal_ctxt.clone();
+        // tokio::spawn(async move {
+        //     let mut buffer = [0; 32];
+        //     watch
+        //         .event_stream(&mut buffer)
+        //         .unwrap()
+        //         .for_each(|_| async {
+        //             let mut lock = ctrl.lock().await;
+        //             let new_profile = Profile::get_active_profile().unwrap();
+        //             if new_profile != lock.config.active_profile {
+        //                 lock.config.active_profile = new_profile;
+        //                 lock.write_profile_curve_to_platform().unwrap();
+        //                 lock.save_config();
+        //             }
+        //             Self::notify_profile(&sig_ctx, lock.config.active_profile)
+        //                 .await
+        //                 .ok();
+        //         })
+        //         .await;
+        // });
+
         let ctrl = self.0.clone();
-        let mut watch = self.0.lock().await.platform.monitor_platform_profile()?;
+        let mut watch = self
+            .0
+            .lock()
+            .await
+            .platform
+            .monitor_throttle_thermal_policy()?;
 
         tokio::spawn(async move {
             let mut buffer = [0; 32];
@@ -210,13 +238,15 @@ impl CtrlTask for ProfileZbus {
                 .unwrap()
                 .for_each(|_| async {
                     let mut lock = ctrl.lock().await;
-                    let new_profile = Profile::get_active_profile().unwrap();
+                    let new_thermal = lock.platform.get_throttle_thermal_policy().unwrap();
+                    let new_profile = Profile::from_throttle_thermal_policy(new_thermal);
                     if new_profile != lock.config.active_profile {
                         lock.config.active_profile = new_profile;
                         lock.write_profile_curve_to_platform().unwrap();
                         lock.save_config();
+                        Profile::set_profile(lock.config.active_profile).unwrap();
                     }
-                    Self::notify_profile(&signal_ctxt.clone(), lock.config.active_profile)
+                    Self::notify_profile(&signal_ctxt, lock.config.active_profile)
                         .await
                         .ok();
                 })

daemon/src/daemon.rs

@@ -7,7 +7,6 @@ use std::time::Duration;
 use ::zbus::export::futures_util::lock::Mutex;
 use ::zbus::Connection;
 use daemon::ctrl_anime::CtrlAnime;
-use log::LevelFilter;
 use log::{error, info, warn};
 use tokio::time::sleep;
 use zbus::SignalContext;
@@ -33,9 +32,9 @@ static PROFILE_CONFIG_PATH: &str = "/etc/asusd/profile.conf";
 async fn main() -> Result<(), Box<dyn std::error::Error>> {
     let mut logger = env_logger::Builder::new();
     logger
+        .parse_default_env()
         .target(env_logger::Target::Stdout)
         .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
         .init();
 
     let is_service = match env::var_os("IS_SERVICE") {

daemon/src/error.rs

@@ -37,7 +37,7 @@ pub enum RogError {
 
 impl fmt::Display for RogError {
     // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
             RogError::ParseVendor => write!(f, "Parse gfx vendor error"),
             RogError::ParseLed => write!(f, "Parse LED error"),
@@ -51,7 +51,7 @@ impl fmt::Display for RogError {
             RogError::DoTask(deets) => write!(f, "Task error: {}", deets),
             RogError::MissingFunction(deets) => write!(f, "Missing functionality: {}", deets),
             RogError::MissingLedBrightNode(path, error) => write!(f, "Led node at {} is missing, please check you have the required patch or dkms module installed: {}", path, error),
-            RogError::ReloadFail(deets) => write!(f, "Task error: {}", deets),
+            RogError::ReloadFail(deets) => write!(f, "Reload error: {}", deets),
             RogError::Profiles(deets) => write!(f, "Profile error: {}", deets),
             RogError::Initramfs(detail) => write!(f, "Initiramfs error: {}", detail),
             RogError::Modprobe(detail) => write!(f, "Modprobe error: {}", detail),

daemon/src/laptops.rs

@@ -71,7 +71,7 @@ impl LaptopLedData {
 }
 
 impl LedSupportFile {
-    /// Consumes the LEDModes
+    /// Consumes the `LEDModes`
     fn matcher(self, prod_family: &str, board_name: &str) -> Option<LaptopLedData> {
         for config in self.led_data {
             if prod_family.contains(&config.prod_family) {

daemon/src/lib.rs

@@ -1,7 +1,7 @@
 #![deny(unused_must_use)]
 /// Configuration loading, saving
 pub mod config;
-/// Control of AniMe matrix display
+/// Control of anime matrix display
 pub mod ctrl_anime;
 /// Keyboard LED brightness control, RGB, and LED display modes
 pub mod ctrl_aura;
@@ -21,9 +21,11 @@ pub mod ctrl_supported;
 
 pub mod error;
 
+use std::future::Future;
+
 use crate::error::RogError;
 use async_trait::async_trait;
-use log::warn;
+use log::{debug, warn};
 use logind_zbus::manager::ManagerProxy;
 use zbus::{export::futures_util::StreamExt, zvariant::ObjectPath, Connection, SignalContext};
 
@@ -134,13 +136,31 @@ pub trait CtrlTask {
     ///
     /// The closures can potentially block, so execution time should be the minimal possible
     /// such as save a variable.
-    async fn create_sys_event_tasks(
+    async fn create_sys_event_tasks<
+        Fut1,
+        Fut2,
+        Fut3,
+        Fut4,
+        F1: Send + 'static,
+        F2: Send + 'static,
+        F3: Send + 'static,
+        F4: Send + 'static,
+    >(
         &self,
-        mut on_sleep: impl FnMut() + Send + 'static,
-        mut on_wake: impl FnMut() + Send + 'static,
-        mut on_shutdown: impl FnMut() + Send + 'static,
-        mut on_boot: impl FnMut() + Send + 'static,
-    ) {
+        mut on_sleep: F1,
+        mut on_wake: F2,
+        mut on_shutdown: F3,
+        mut on_boot: F4,
+    ) where
+        F1: FnMut() -> Fut1,
+        F2: FnMut() -> Fut2,
+        F3: FnMut() -> Fut3,
+        F4: FnMut() -> Fut4,
+        Fut1: Future<Output = ()> + Send,
+        Fut2: Future<Output = ()> + Send,
+        Fut3: Future<Output = ()> + Send,
+        Fut4: Future<Output = ()> + Send,
+    {
         let connection = Connection::system()
             .await
             .expect("Controller could not create dbus connection");
@@ -154,9 +174,11 @@ pub trait CtrlTask {
                 while let Some(event) = notif.next().await {
                     if let Ok(args) = event.args() {
                         if args.start {
-                            on_sleep();
+                            debug!("Doing on_sleep()");
+                            on_sleep().await;
                         } else if !args.start() {
-                            on_wake();
+                            debug!("Doing on_wake()");
+                            on_wake().await;
                         }
                     }
                 }
@@ -172,9 +194,11 @@ pub trait CtrlTask {
                 while let Some(event) = notif.next().await {
                     if let Ok(args) = event.args() {
                         if args.start {
-                            on_shutdown();
+                            debug!("Doing on_shutdown()");
+                            on_shutdown().await;
                         } else if !args.start() {
-                            on_boot();
+                            debug!("Doing on_boot()");
+                            on_boot().await;
                         }
                     }
                 }

daemon/src/systemd.rs

@@ -24,6 +24,9 @@ impl From<SystemdUnitAction> for &str {
 pub enum SystemdUnitState {
     Active,
     Inactive,
+    Masked,
+    Disabled,
+    Enabled,
 }
 
 impl From<SystemdUnitState> for &str {
@@ -31,6 +34,9 @@ impl From<SystemdUnitState> for &str {
         match s {
             SystemdUnitState::Active => "active",
             SystemdUnitState::Inactive => "inactive",
+            SystemdUnitState::Masked => "masked",
+            SystemdUnitState::Disabled => "disabled",
+            SystemdUnitState::Enabled => "enabled",
         }
     }
 }
@@ -66,6 +72,21 @@ pub fn is_systemd_unit_state(state: SystemdUnitState, unit: &str) -> Result<bool
     Ok(false)
 }
 
+/// Get systemd unit state. Blocks while command is run.
+pub fn is_systemd_unit_enabled(state: SystemdUnitState, unit: &str) -> Result<bool, RogError> {
+    let mut cmd = Command::new("systemctl");
+    cmd.arg("is-enabled");
+    cmd.arg(unit);
+
+    let output = cmd
+        .output()
+        .map_err(|err| RogError::Command(format!("{:?}", cmd), err))?;
+    if output.stdout.starts_with(<&str>::from(state).as_bytes()) {
+        return Ok(true);
+    }
+    Ok(false)
+}
+
 /// Wait for a systemd unit to change to `state`. Checks state every 250ms for 3 seconds. Blocks while running wait.
 pub fn wait_systemd_unit_state(state: SystemdUnitState, unit: &str) -> Result<(), RogError> {
     let mut cmd = Command::new("systemctl");

data/asusd-ledmodes.toml

@@ -1,3 +1,10 @@
+[[led_data]]
+prod_family = "ASUS TUF Gaming F15"
+board_names = ["FX506HC"]
+standard = ["Static", "Breathe", "Strobe", "Pulse"]
+multizone = []
+per_key = false
+
 [[led_data]]
 prod_family = "TUF"
 board_names = ["FA507"]
@@ -78,7 +85,7 @@ per_key = true
 
 [[led_data]]
 prod_family = "ROG Strix"
-board_names = ["G513QE", "GX531", "G512LV", "G712LV", "G712LW", "G513IH", "G513QY", "G713QM", "G512", "G713RW"]
+board_names = ["G513QE", "GX531", "G512LV", "G712LV", "G712LW", "G513IH", "G513QY", "G713QM", "G512", "G713RM", "G713RW"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
 multizone = ["Key1", "Key2", "Key3", "Key4"]
 per_key = false
@@ -184,7 +191,7 @@ per_key = false
 
 [[led_data]]
 prod_family = "ROG Strix"
-board_names = ["G513IC", "G513RC"]
+board_names = ["G513IC", "G513RC", "G513RM"]
 standard = ["Static", "Breathe", "Strobe", "Rainbow", "Pulse"]
 multizone = []
 per_key = false

data/asusd.service

@@ -6,6 +6,7 @@ Before=multi-user.target
 
 [Service]
 Environment=IS_SERVICE=1
+Environment=RUST_LOG="info"
 ExecStartPre=/bin/sleep 2
 ExecStart=/usr/bin/asusd
 Restart=on-failure

deny.toml

@@ -0,0 +1,69 @@
+# https://embarkstudios.github.io/cargo-deny/
+
+targets = [
+    { triple = "aarch64-apple-darwin" },
+    { triple = "aarch64-linux-android" },
+    { triple = "wasm32-unknown-unknown" },
+    { triple = "x86_64-apple-darwin" },
+    { triple = "x86_64-pc-windows-msvc" },
+    { triple = "x86_64-unknown-linux-gnu" },
+    { triple = "x86_64-unknown-linux-musl" },
+]
+
+[advisories]
+vulnerability = "deny"
+unmaintained = "warn"
+yanked = "deny"
+ignore = [
+    "RUSTSEC-2020-0071", # https://rustsec.org/advisories/RUSTSEC-2020-0071 - chrono/time: Potential segfault in the time crate
+    "RUSTSEC-2020-0159", # https://rustsec.org/advisories/RUSTSEC-2020-0159 - chrono/time: Potential segfault in localtime_r invocations
+    "RUSTSEC-2021-0127", # https://rustsec.org/advisories/RUSTSEC-2021-0127 - https://github.com/bheisler/criterion.rs/issues/534
+]
+
+[bans]
+multiple-versions = "deny"
+wildcards = "allow" # at least until https://github.com/EmbarkStudios/cargo-deny/issues/241 is fixed
+deny = [
+    { name = "openssl" },     # prefer rustls
+    { name = "openssl-sys" }, # prefer rustls
+]
+
+skip-tree = [
+    { name = "criterion" }, # dev-dependency
+    { name = "glium" },     # legacy crate, lots of old dependencies
+    { name = "rfd" },       # example dependency
+    { name = "three-d" },   # example dependency
+]
+
+
+[licenses]
+unlicensed = "deny"
+allow-osi-fsf-free = "neither"
+confidence-threshold = 0.92 # We want really high confidence when inferring licenses from text
+copyleft = "deny"
+allow = [
+    "Apache-2.0",         # https://tldrlegal.com/license/apache-license-2.0-(apache-2.0)
+    "BSD-2-Clause",       # https://tldrlegal.com/license/bsd-2-clause-license-(freebsd)
+    "BSD-3-Clause",       # https://tldrlegal.com/license/bsd-3-clause-license-(revised)
+    "BSL-1.0",            # https://tldrlegal.com/license/boost-software-license-1.0-explained
+    "CC0-1.0",            # https://creativecommons.org/publicdomain/zero/1.0/
+    "ISC",                # https://tldrlegal.com/license/-isc-license
+    "LicenseRef-UFL-1.0", # https://tldrlegal.com/license/ubuntu-font-license,-1.0 - no official SPDX, see https://github.com/emilk/egui/issues/2321
+    "MIT",                # https://tldrlegal.com/license/mit-license
+    "MPL-2.0",            # https://www.mozilla.org/en-US/MPL/2.0/FAQ/ - see Q11
+    "OFL-1.1",            # https://spdx.org/licenses/OFL-1.1.html
+    "OpenSSL",            # https://www.openssl.org/source/license.html
+    "Unicode-DFS-2016",   # https://spdx.org/licenses/Unicode-DFS-2016.html
+    "Zlib",               # https://tldrlegal.com/license/zlib-libpng-license-(zlib)
+]
+
+[[licenses.clarify]]
+name = "webpki"
+expression = "ISC"
+license-files = [{ path = "LICENSE", hash = 0x001c7e6c }]
+
+[[licenses.clarify]]
+name = "ring"
+expression = "MIT AND ISC AND OpenSSL"
+license-files = [{ path = "LICENSE", hash = 0xbd0eed23 }]
+

rog-anime/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "rog_anime"
-version.workspace = true
 license = "MPL-2.0"
+version.workspace = true
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
 repository = "https://gitlab.com/asus-linux/asus-nb-ctrl"
@@ -30,4 +30,4 @@ glam.workspace = true
 
 zbus = { workspace = true, optional = true }
 
-sysfs-class = { workspace = true, optional = true }
+sysfs-class = { workspace = true, optional = true }

rog-anime/src/data.rs

@@ -47,8 +47,7 @@ impl AnimeType {
     /// The width of diagonal images
     pub fn width(&self) -> usize {
         match self {
-            AnimeType::GA401 => 74,
-            AnimeType::GA402 => 74,
+            AnimeType::GA401 | AnimeType::GA402 => 74,
         }
     }
 
@@ -103,8 +102,8 @@ impl AnimeDataBuffer {
 
     /// Create from a vector of bytes
     ///
-    /// # Panics
-    /// Will panic if the vector length is not `ANIME_DATA_LEN`
+    /// # Errors
+    /// Will error if the vector length is not `ANIME_DATA_LEN`
     #[inline]
     pub fn from_vec(anime: AnimeType, data: Vec<u8>) -> Result<Self> {
         if data.len() != anime.data_length() {
@@ -147,10 +146,7 @@ impl TryFrom<AnimeDataBuffer> for AnimePacketType {
 /// This runs the animations as a blocking loop by using the `callback` to write data
 ///
 /// If `callback` is `Ok(true)` then `run_animation` will exit the animation loop early.
-pub fn run_animation(
-    frames: &AnimeGif,
-    callback: &dyn Fn(AnimeDataBuffer) -> Result<bool>,
-) -> Result<()> {
+pub fn run_animation(frames: &AnimeGif, callback: &dyn Fn(AnimeDataBuffer) -> Result<bool>) {
     let mut count = 0;
     let start = Instant::now();
 
@@ -215,9 +211,10 @@ pub fn run_animation(
                 }
             }
 
+            // TODO: Log this error
             if matches!(callback(output), Ok(true)) {
                 info!("rog-anime: frame-loop callback asked to exit early");
-                return Ok(());
+                return;
             }
 
             if timed && Instant::now().duration_since(start) > run_time {
@@ -232,5 +229,4 @@ pub fn run_animation(
             }
         }
     }
-    Ok(())
 }

rog-anime/src/diagonal.rs

@@ -52,39 +52,43 @@ impl AnimeDiagonal {
 
         let mut matrix = AnimeDiagonal::new(anime_type, duration);
 
-        match raster {
+        match &raster {
             png_pong::PngRaster::Gray8(ras) => {
-                Self::pixels_from_8bit(ras, &mut matrix, bright, true)
+                Self::pixels_from_8bit(ras, &mut matrix, bright, true);
             }
             png_pong::PngRaster::Graya8(ras) => {
-                Self::pixels_from_8bit(ras, &mut matrix, bright, true)
+                Self::pixels_from_8bit(ras, &mut matrix, bright, true);
             }
             png_pong::PngRaster::Rgb8(ras) => {
-                Self::pixels_from_8bit(ras, &mut matrix, bright, false)
+                Self::pixels_from_8bit(ras, &mut matrix, bright, false);
             }
             png_pong::PngRaster::Rgba8(ras) => {
-                Self::pixels_from_8bit(ras, &mut matrix, bright, false)
+                Self::pixels_from_8bit(ras, &mut matrix, bright, false);
             }
             png_pong::PngRaster::Gray16(ras) => {
-                Self::pixels_from_16bit(ras, &mut matrix, bright, true)
+                Self::pixels_from_16bit(ras, &mut matrix, bright, true);
             }
             png_pong::PngRaster::Rgb16(ras) => {
-                Self::pixels_from_16bit(ras, &mut matrix, bright, false)
+                Self::pixels_from_16bit(ras, &mut matrix, bright, false);
             }
             png_pong::PngRaster::Graya16(ras) => {
-                Self::pixels_from_16bit(ras, &mut matrix, bright, true)
+                Self::pixels_from_16bit(ras, &mut matrix, bright, true);
             }
             png_pong::PngRaster::Rgba16(ras) => {
-                Self::pixels_from_16bit(ras, &mut matrix, bright, false)
+                Self::pixels_from_16bit(ras, &mut matrix, bright, false);
             }
-            _ => return Err(AnimeError::Format),
+            png_pong::PngRaster::Palette(..) => return Err(AnimeError::Format),
         };
 
         Ok(matrix)
     }
 
-    fn pixels_from_8bit<P>(ras: pix::Raster<P>, matrix: &mut AnimeDiagonal, bright: f32, grey: bool)
-    where
+    fn pixels_from_8bit<P>(
+        ras: &pix::Raster<P>,
+        matrix: &mut AnimeDiagonal,
+        bright: f32,
+        grey: bool,
+    ) where
         P: pix::el::Pixel<Chan = pix::chan::Ch8>,
     {
         let width = ras.width();
@@ -105,7 +109,7 @@ impl AnimeDiagonal {
     }
 
     fn pixels_from_16bit<P>(
-        ras: pix::Raster<P>,
+        ras: &pix::Raster<P>,
         matrix: &mut AnimeDiagonal,
         bright: f32,
         grey: bool,
@@ -136,7 +140,7 @@ impl AnimeDiagonal {
         }
     }
 
-    /// Do conversion from the nested Vec in AnimeMatrix to the two required
+    /// Do conversion from the nested Vec in `AnimeMatrix` to the two required
     /// packets suitable for sending over USB
     fn to_ga401_packets(&self) -> Result<AnimeDataBuffer> {
         let mut buf = vec![0u8; AnimeType::GA401.data_length()];

rog-anime/src/error.rs

@@ -26,7 +26,7 @@ pub enum AnimeError {
 
 impl fmt::Display for AnimeError {
     #[inline]
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
             AnimeError::NoFrames => write!(f, "No frames in PNG"),
             AnimeError::Io(e) => write!(f, "Could not open: {}", e),

rog-anime/src/grid.rs

@@ -93,7 +93,7 @@ impl AnimeGrid {
 impl TryFrom<AnimeGrid> for AnimeDataBuffer {
     type Error = AnimeError;
 
-    /// Do conversion from the nested Vec in AniMeMatrix to the two required
+    /// Do conversion from the nested Vec in anime matrix to the two required
     /// packets suitable for sending over USB
     fn try_from(anime: AnimeGrid) -> Result<Self> {
         let mut buf = vec![0u8; anime.anime_type.data_length()];

rog-anime/src/image.rs

@@ -30,7 +30,7 @@ impl Default for Pixel {
 /// is to be used to sample an image and set the LED brightness.
 ///
 /// The position of the Led in `LedPositions` determines the placement in the final
-/// data packets when written to the AniMe.
+/// data packets when written to the `AniMe`.
 #[derive(Debug, Clone, Copy, PartialEq)]
 pub struct Led(f32, f32, u8);
 
@@ -58,7 +58,7 @@ impl Led {
 
 /// Container of `Led`, each of which specifies a position within the image
 /// The main use of this is to position and sample colours for the final image
-/// to show on AniMe
+/// to show on `AniMe`
 pub struct AnimeImage {
     pub scale: Vec2,
     /// Angle in radians
@@ -294,8 +294,8 @@ impl AnimeImage {
             let x0 = led_from_px.mul_vec3(pos + Vec3::new(0.0, -0.5, 0.0));
 
             const GROUP: [f32; 4] = [0.0, 0.5, 1.0, 1.5];
-            for u in GROUP.iter() {
-                for v in GROUP.iter() {
+            for u in &GROUP {
+                for v in &GROUP {
                     let sample = x0 + *u * du + *v * dv;
 
                     let x = sample.x as i32;
@@ -399,7 +399,7 @@ impl AnimeImage {
         let png_pong::Step { raster, delay: _ } = decoder.last().ok_or(AnimeError::NoFrames)??;
 
         let width;
-        let pixels = match raster {
+        let pixels = match &raster {
             png_pong::PngRaster::Gray8(ras) => {
                 width = ras.width();
                 Self::pixels_from_8bit(ras, true)
@@ -432,7 +432,7 @@ impl AnimeImage {
                 width = ras.width();
                 Self::pixels_from_16bit(ras, false)
             }
-            _ => return Err(AnimeError::Format),
+            png_pong::PngRaster::Palette(..) => return Err(AnimeError::Format),
         };
 
         let mut matrix = AnimeImage::new(
@@ -449,7 +449,7 @@ impl AnimeImage {
         Ok(matrix)
     }
 
-    fn pixels_from_8bit<P>(ras: pix::Raster<P>, grey: bool) -> Vec<Pixel>
+    fn pixels_from_8bit<P>(ras: &pix::Raster<P>, grey: bool) -> Vec<Pixel>
     where
         P: pix::el::Pixel<Chan = pix::chan::Ch8>,
     {
@@ -468,7 +468,7 @@ impl AnimeImage {
             .collect()
     }
 
-    fn pixels_from_16bit<P>(ras: pix::Raster<P>, grey: bool) -> Vec<Pixel>
+    fn pixels_from_16bit<P>(ras: &pix::Raster<P>, grey: bool) -> Vec<Pixel>
     where
         P: pix::el::Pixel<Chan = pix::chan::Ch16>,
     {
@@ -491,7 +491,7 @@ impl AnimeImage {
 impl TryFrom<&AnimeImage> for AnimeDataBuffer {
     type Error = AnimeError;
 
-    /// Do conversion from the nested Vec in AnimeDataBuffer to the two required
+    /// Do conversion from the nested Vec in `AnimeDataBuffer` to the two required
     /// packets suitable for sending over USB
     fn try_from(leds: &AnimeImage) -> Result<Self> {
         let mut l: Vec<u8> = leds

rog-anime/src/lib.rs

@@ -7,11 +7,11 @@ pub use data::*;
 mod grid;
 pub use grid::*;
 
-/// Transform a PNG image for displaying on AniMe matrix display
+/// Transform a PNG image for displaying on `AniMe` matrix display
 mod image;
 pub use image::*;
 
-/// A grid of data that is intended to be read out and displayed on the ANiMe as
+/// A grid of data that is intended to be read out and displayed on the `AniMe` as
 /// a diagonal
 mod diagonal;
 pub use diagonal::*;

rog-anime/src/sequencer.rs

@@ -7,7 +7,7 @@ use crate::{
     error::Result, AnimTime, AnimeDataBuffer, AnimeDiagonal, AnimeGif, AnimeImage, AnimeType,
 };
 
-/// All the possible AniMe actions that can be used. This enum is intended to be
+/// All the possible `AniMe` actions that can be used. This enum is intended to be
 /// a helper for loading up `ActionData`.
 #[derive(Debug, Clone, Deserialize, Serialize)]
 pub enum ActionLoader {
@@ -44,7 +44,7 @@ pub enum ActionLoader {
     Pause(Duration),
 }
 
-/// All the possible AniMe actions that can be used. The enum is intended to be
+/// All the possible `AniMe` actions that can be used. The enum is intended to be
 /// used in a array allowing the user to cycle through a series of actions.
 #[derive(Debug, Clone, Deserialize, Serialize)]
 pub enum ActionData {
@@ -194,7 +194,7 @@ impl Sequences {
         None
     }
 
-    pub fn iter(&self) -> ActionIterator {
+    pub fn iter(&self) -> ActionIterator<'_> {
         ActionIterator {
             actions: self,
             next_idx: 0,

rog-anime/src/usb.rs

@@ -1,4 +1,4 @@
-//! Utils for writing to the AniMe USB device
+//! Utils for writing to the `AniMe` USB device
 //!
 //! Use of the device requires a few steps:
 //! 1. Initialise the device by writing the two packets from `get_init_packets()`
@@ -63,7 +63,7 @@ pub const fn pkt_for_flush() -> [u8; PACKET_SIZE] {
 }
 
 /// Get the packet required for setting the device to on, on boot. Requires
-/// pkt_for_apply()` to be written after.
+/// `pkt_for_apply()` to be written after.
 #[inline]
 pub const fn pkt_for_set_boot(status: bool) -> [u8; PACKET_SIZE] {
     let mut pkt = [0; PACKET_SIZE];

rog-aura/Cargo.toml

@@ -1,7 +1,7 @@
 [package]
 name = "rog_aura"
-version.workspace = true
 license = "MPL-2.0"
+version.workspace = true
 readme = "README.md"
 authors = ["Luke <luke@ljones.dev>"]
 repository = "https://gitlab.com/asus-linux/asusctl"
@@ -23,4 +23,4 @@ toml = { workspace = true, optional = true }
 zbus = { workspace = true, optional = true }
 
 [dev-dependencies]
-serde_json.workspace = true
+serde_json.workspace = true

rog-aura/src/builtin_modes.rs

@@ -25,7 +25,6 @@ impl From<u32> for LedBrightness {
         match bright {
             0 => LedBrightness::Off,
             1 => LedBrightness::Low,
-            2 => LedBrightness::Med,
             3 => LedBrightness::High,
             _ => LedBrightness::Med,
         }
@@ -179,21 +178,7 @@ impl Display for AuraModeNum {
 
 impl From<AuraModeNum> for String {
     fn from(mode: AuraModeNum) -> Self {
-        match mode {
-            AuraModeNum::Static => "Static",
-            AuraModeNum::Breathe => "Breathe",
-            AuraModeNum::Strobe => "Strobe",
-            AuraModeNum::Rainbow => "Rainbow",
-            AuraModeNum::Star => "Stars",
-            AuraModeNum::Rain => "Rain",
-            AuraModeNum::Highlight => "Highlight",
-            AuraModeNum::Laser => "Laser",
-            AuraModeNum::Ripple => "Ripple",
-            AuraModeNum::Pulse => "Pulse",
-            AuraModeNum::Comet => "Comet",
-            AuraModeNum::Flash => "Flash",
-        }
-        .to_string()
+        <&str>::from(&mode).to_owned()
     }
 }
 
@@ -218,7 +203,6 @@ impl From<&AuraModeNum> for &str {
 impl From<&str> for AuraModeNum {
     fn from(mode: &str) -> Self {
         match mode {
-            "Static" => AuraModeNum::Static,
             "Breathe" => AuraModeNum::Breathe,
             "Strobe" => AuraModeNum::Strobe,
             "Rainbow" => AuraModeNum::Rainbow,
@@ -238,7 +222,6 @@ impl From<&str> for AuraModeNum {
 impl From<u8> for AuraModeNum {
     fn from(mode: u8) -> Self {
         match mode {
-            0 => AuraModeNum::Static,
             1 => AuraModeNum::Breathe,
             2 => AuraModeNum::Strobe,
             3 => AuraModeNum::Rainbow,
@@ -284,22 +267,14 @@ impl FromStr for AuraZone {
     fn from_str(s: &str) -> Result<Self, Self::Err> {
         let s = s.to_lowercase();
         match s.to_ascii_lowercase().as_str() {
-            "0" => Ok(AuraZone::None),
-            "none" => Ok(AuraZone::None),
-            "1" => Ok(AuraZone::Key1),
-            "one" => Ok(AuraZone::Key1),
-            "2" => Ok(AuraZone::Key2),
-            "two" => Ok(AuraZone::Key2),
-            "3" => Ok(AuraZone::Key3),
-            "three" => Ok(AuraZone::Key3),
-            "4" => Ok(AuraZone::Key4),
-            "four" => Ok(AuraZone::Key4),
-            "5" => Ok(AuraZone::Logo),
-            "logo" => Ok(AuraZone::Logo),
-            "6" => Ok(AuraZone::BarLeft),
-            "lightbar-left" => Ok(AuraZone::BarLeft),
-            "7" => Ok(AuraZone::BarRight),
-            "lightbar-right" => Ok(AuraZone::BarRight),
+            "0" | "none" => Ok(AuraZone::None),
+            "1" | "one" => Ok(AuraZone::Key1),
+            "2" | "two" => Ok(AuraZone::Key2),
+            "3" | "three" => Ok(AuraZone::Key3),
+            "4" | "four" => Ok(AuraZone::Key4),
+            "5" | "logo" => Ok(AuraZone::Logo),
+            "6" | "lightbar-left" => Ok(AuraZone::BarLeft),
+            "7" | "lightbar-right" => Ok(AuraZone::BarRight),
             _ => Err(Error::ParseSpeed),
         }
     }
@@ -395,18 +370,20 @@ impl AuraEffect {
     /// factory mode accepts only one colour.
     pub const fn allowed_parameters(mode: AuraModeNum) -> AuraParameters {
         match mode {
-            AuraModeNum::Static => AuraParameters::new(true, true, false, false, false),
+            AuraModeNum::Static
+            | AuraModeNum::Highlight
+            | AuraModeNum::Pulse
+            | AuraModeNum::Comet
+            | AuraModeNum::Flash => AuraParameters::new(true, true, false, false, false),
             AuraModeNum::Breathe => AuraParameters::new(true, true, true, true, false),
-            AuraModeNum::Strobe => AuraParameters::new(true, false, false, true, false),
+            AuraModeNum::Strobe | AuraModeNum::Rain => {
+                AuraParameters::new(true, false, false, true, false)
+            }
             AuraModeNum::Rainbow => AuraParameters::new(true, false, false, true, true),
             AuraModeNum::Star => AuraParameters::new(true, true, true, true, true),
-            AuraModeNum::Rain => AuraParameters::new(true, false, false, true, false),
-            AuraModeNum::Highlight => AuraParameters::new(true, true, false, false, false),
-            AuraModeNum::Laser => AuraParameters::new(true, true, false, true, false),
-            AuraModeNum::Ripple => AuraParameters::new(true, true, false, true, false),
-            AuraModeNum::Pulse => AuraParameters::new(true, true, false, false, false),
-            AuraModeNum::Comet => AuraParameters::new(true, true, false, false, false),
-            AuraModeNum::Flash => AuraParameters::new(true, true, false, false, false),
+            AuraModeNum::Laser | AuraModeNum::Ripple => {
+                AuraParameters::new(true, true, false, true, false)
+            }
         }
     }
 }

rog-aura/src/error.rs

@@ -13,7 +13,7 @@ pub enum Error {
 
 impl fmt::Display for Error {
     // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
             Error::ParseColour => write!(f, "Could not parse colour"),
             Error::ParseSpeed => write!(f, "Could not parse speed"),

rog-aura/src/key_to_str.rs

@@ -139,17 +139,17 @@ impl From<&Key> for &str {
             Key::MediaStop => "Media Stop",
             Key::MediaNext => "Media Next",
             Key::MediaPrev => "Media Previous",
-            Key::NormalBlank => "",
-            Key::NormalSpacer => "",
-            Key::FuncBlank => "",
-            Key::FuncSpacer => "",
-            Key::ArrowBlank => "",
-            Key::ArrowSpacer => "",
-            Key::ArrowRegularBlank => "",
-            Key::ArrowRegularSpacer => "",
-            Key::ArrowSplitBlank => "",
-            Key::ArrowSplitSpacer => "",
-            Key::RowEndSpacer => "",
+            Key::NormalBlank
+            | Key::NormalSpacer
+            | Key::FuncBlank
+            | Key::FuncSpacer
+            | Key::ArrowBlank
+            | Key::ArrowSpacer
+            | Key::ArrowRegularBlank
+            | Key::ArrowRegularSpacer
+            | Key::ArrowSplitBlank
+            | Key::ArrowSplitSpacer
+            | Key::RowEndSpacer => "",
         }
     }
 }

rog-aura/src/keys.rs

@@ -203,17 +203,22 @@ pub enum KeyShape {
 impl KeyShape {
     pub const fn width(&self) -> f32 {
         match self {
-            Self::Tilde => 0.8,
-            Self::Normal => 1.0,
-            Self::NormalBlank => 1.0,
-            Self::NormalSpacer => 1.0,
-            Self::Func => 1.0,
-            Self::FuncBlank => 1.0,
+            Self::Tilde | Self::Arrow => 0.8,
+            Self::Normal
+            | Self::NormalBlank
+            | Self::NormalSpacer
+            | Self::Func
+            | Self::FuncBlank
+            | Self::Space5
+            | Self::ArrowBlank
+            | Self::ArrowSpacer
+            | Self::ArrowSplit
+            | Self::ArrowSplitBlank
+            | Self::ArrowSplitSpacer => 1.0,
             Self::FuncSpacer => 0.6,
             Self::Space => 5.0,
-            Self::Space5 => 1.0,
             Self::LCtrlMed => 1.1,
-            Self::LShift => 2.0,
+            Self::LShift | Self::Backspace => 2.0,
             Self::LShift3 => 0.67,
             Self::RShift => 2.8,
             Self::RshiftSmall => 1.8,
@@ -222,12 +227,9 @@ impl KeyShape {
             Self::Return3 => 0.7333,
             Self::Tab => 1.4,
             Self::Caps => 1.6,
-            Self::Backspace => 2.0,
             Self::Backspace3 => 0.666,
             Self::ArrowRegularBlank | Self::ArrowRegularSpacer => 0.7,
-            Self::Arrow => 0.8,
-            Self::ArrowBlank | Self::ArrowSpacer => 1.0,
-            Self::ArrowSplit | Self::ArrowSplitBlank | Self::ArrowSplitSpacer => 1.0,
+
             Self::RowEndSpacer => 0.1,
         }
     }

rog-aura/src/layouts/g513.rs

@@ -6,7 +6,7 @@ impl KeyLayout {
     pub fn g513_layout() -> Self {
         Self {
             matches: vec!["G513".into()],
-            locale: "US".to_string(),
+            locale: "US".to_owned(),
             rows: vec![
                 KeyRow::new(
                     0.8,

rog-aura/src/layouts/ga401.rs

@@ -5,7 +5,7 @@ impl KeyLayout {
     pub fn ga401_layout() -> Self {
         Self {
             matches: vec!["GA401".into(), "GA402".into()],
-            locale: "US".to_string(),
+            locale: "US".to_owned(),
             rows: vec![
                 KeyRow::new(
                     0.8,

rog-aura/src/layouts/gx502.rs

@@ -5,7 +5,7 @@ impl KeyLayout {
     pub fn gx502_layout() -> Self {
         Self {
             matches: vec!["GX502".into(), "GU502".into()],
-            locale: "US".to_string(),
+            locale: "US".to_owned(),
             rows: vec![
                 KeyRow::new(
                     0.8,

rog-aura/src/layouts/mod.rs

@@ -43,7 +43,7 @@ impl KeyLayout {
 
     pub fn matches(&self, board_name: &str) -> bool {
         let board = board_name.to_ascii_uppercase();
-        for tmp in self.matches.iter() {
+        for tmp in &self.matches {
             if board.contains(tmp.as_str()) {
                 return true;
             }
@@ -91,7 +91,7 @@ impl KeyRow {
         Self { height, row }
     }
 
-    pub fn row(&self) -> Iter<Key> {
+    pub fn row(&self) -> Iter<'_, Key> {
         self.row.iter()
     }
 

rog-aura/src/per_zone.rs

@@ -43,8 +43,7 @@ impl ZonedColourArray {
 
     pub fn rgb_for_zone(&mut self, zone: PerZone) -> &mut [u8] {
         match zone {
-            PerZone::None => &mut self.0[9..=11],
-            PerZone::KeyboardLeft => &mut self.0[9..=11],
+            PerZone::None | PerZone::KeyboardLeft => &mut self.0[9..=11],
             PerZone::KeyboardCenterLeft => &mut self.0[12..=14],
             PerZone::KeyboardCenterRight => &mut self.0[15..=17],
             PerZone::KeyboardRight => &mut self.0[18..=20],

rog-aura/src/sequencer/mod.rs

@@ -9,7 +9,7 @@ use serde_derive::{Deserialize, Serialize};
 // static mut RNDINDEX: usize = 0;
 static mut PRNDINDEX: usize = 0;
 
-/// Pseudo random table ripped straight out of Room4Doom
+/// Pseudo random table ripped straight out of room4doom
 pub const RNDTABLE: [i32; 256] = [
     0, 8, 109, 220, 222, 241, 149, 107, 75, 248, 254, 140, 16, 66, 74, 21, 211, 47, 80, 242, 154,
     27, 205, 128, 161, 89, 77, 36, 95, 110, 85, 48, 212, 140, 211, 249, 22, 79, 200, 50, 28, 188,
@@ -88,7 +88,7 @@ impl Sequences {
     }
 
     pub fn next_state(&mut self, layout: &KeyLayout) {
-        for effect in self.0.iter_mut() {
+        for effect in &mut self.0 {
             effect.next_state(layout);
         }
     }
@@ -97,7 +97,7 @@ impl Sequences {
         let mut keys = KeyColourArray::new();
         let mut zones = ZonedColourArray::new();
         let mut is_per_key = false;
-        for effect in self.0.iter() {
+        for effect in &self.0 {
             match effect.get_led_type() {
                 LedType::Key(key) => {
                     is_per_key = true;

rog-aura/src/usb.rs

@@ -36,14 +36,10 @@ impl From<&str> for AuraDevice {
     fn from(s: &str) -> Self {
         match s.to_lowercase().as_str() {
             "tuf" => AuraDevice::Tuf,
-            "1866" => AuraDevice::X1866,
-            "1869" => AuraDevice::X1869,
-            "1854" => AuraDevice::X1854,
-            "19b6" => AuraDevice::X19B6,
-            "0x1866" => AuraDevice::X1866,
-            "0x1869" => AuraDevice::X1869,
-            "0x1854" => AuraDevice::X1854,
-            "0x19b6" => AuraDevice::X19B6,
+            "1866" | "0x1866" => AuraDevice::X1866,
+            "1869" | "0x1869" => AuraDevice::X1869,
+            "1854" | "0x1854" => AuraDevice::X1854,
+            "19b6" | "0x19b6" => AuraDevice::X19B6,
             _ => AuraDevice::Unknown,
         }
     }
@@ -108,9 +104,9 @@ impl From<AuraDev1866> for u32 {
 impl AuraDev1866 {
     pub fn to_bytes(control: &[Self]) -> [u8; 3] {
         let mut a: u32 = 0;
-        control.iter().for_each(|n| {
+        for n in control {
             a |= *n as u32;
-        });
+        }
         [
             ((a & 0xff0000) >> 16) as u8,
             ((a & 0xff00) >> 8) as u8,
@@ -197,9 +193,9 @@ impl From<AuraDev19b6> for u32 {
 impl AuraDev19b6 {
     pub fn to_bytes(control: &[Self]) -> [u8; 3] {
         let mut a: u32 = 0;
-        control.iter().for_each(|n| {
+        for n in control {
             a |= *n as u32;
-        });
+        }
         [
             (a & 0xff) as u8,
             ((a & 0xff00) >> 8) as u8,

rog-control-center/Cargo.toml

@@ -1,5 +1,6 @@
 [package]
 name = "rog-control-center"
+license = "MPL-2.0"
 version.workspace = true
 authors = ["Luke D. Jones <luke@ljones.dev>"]
 edition = "2021"
@@ -8,12 +9,11 @@ edition = "2021"
 mocking = []
 
 [dependencies]
-egui = { git = "https://github.com/flukejones/egui" }
-eframe= { git = "https://github.com/flukejones/egui" }
-#eframe= { git = "https://github.com/emilk/egui", default-features = false, features = ["dark-light", "default_fonts", "wgpu"] }
+egui = { git = "https://github.com/flukejones/egui", branch = "wayland_dark_theme" }
+eframe = { git = "https://github.com/flukejones/egui", branch = "wayland_dark_theme" }
 
 libappindicator = "0.7" # Tray icon
-gtk = "0.15"
+gtk = "0.15.5"
 
 daemon = { path = "../daemon" }
 rog_anime = { path = "../rog-anime" }
@@ -22,7 +22,6 @@ rog_aura = { path = "../rog-aura" }
 rog_profiles = { path = "../rog-profiles" }
 rog_platform = { path = "../rog-platform" }
 supergfxctl = { git = "https://gitlab.com/asus-linux/supergfxctl.git", default-features = false }
-#supergfxctl = { path = "../../supergfxctl", default-features = false }
 
 log.workspace = true
 env_logger.workspace = true
@@ -38,5 +37,5 @@ notify-rust.workspace = true
 
 png_pong.workspace = true
 
-nix = "^0.25"
-tempfile = "3.2.0"
+nix = "^0.26.1"
+tempfile = "3.3.0"

rog-control-center/src/config.rs

@@ -4,19 +4,20 @@ use std::{
     fs::{create_dir, OpenOptions},
     io::{Read, Write},
 };
-//use log::{error, info, warn};
 
-use crate::{error::Error, notify::EnabledNotifications};
+use crate::{error::Error, update_and_notify::EnabledNotifications};
 
 const CFG_DIR: &str = "rog";
 const CFG_FILE_NAME: &str = "rog-control-center.cfg";
 
 #[derive(Debug, Clone, Deserialize, Serialize)]
-#[serde(default)]
 pub struct Config {
     pub run_in_background: bool,
     pub startup_in_background: bool,
+    pub ac_command: String,
+    pub bat_command: String,
     pub enable_notifications: bool,
+    // This field must be last
     pub enabled_notifications: EnabledNotifications,
 }
 
@@ -27,6 +28,8 @@ impl Default for Config {
             startup_in_background: false,
             enable_notifications: true,
             enabled_notifications: EnabledNotifications::default(),
+            ac_command: String::new(),
+            bat_command: String::new(),
         }
     }
 }
@@ -67,6 +70,9 @@ impl Config {
             } else if let Ok(data) = toml::from_str::<Config>(&buf) {
                 info!("Loaded config file {path:?}");
                 return Ok(data);
+            } else if let Ok(data) = toml::from_str::<Config455>(&buf) {
+                info!("Loaded old v4.5.5 config file {path:?}");
+                return Ok(data.into());
             }
         }
         Err(Error::ConfigLoadFail)
@@ -100,3 +106,24 @@ impl Config {
         Ok(())
     }
 }
+
+#[derive(Debug, Clone, Deserialize, Serialize)]
+pub struct Config455 {
+    pub run_in_background: bool,
+    pub startup_in_background: bool,
+    pub enable_notifications: bool,
+    pub enabled_notifications: EnabledNotifications,
+}
+
+impl From<Config455> for Config {
+    fn from(c: Config455) -> Self {
+        Self {
+            run_in_background: c.run_in_background,
+            startup_in_background: c.startup_in_background,
+            enable_notifications: c.enable_notifications,
+            enabled_notifications: c.enabled_notifications,
+            ac_command: String::new(),
+            bat_command: String::new(),
+        }
+    }
+}

rog-control-center/src/error.rs

@@ -15,7 +15,7 @@ pub enum Error {
 
 impl fmt::Display for Error {
     // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
             Error::Io(err) => write!(f, "Failed to open: {}", err),
             Error::Nix(err) => write!(f, "Error: {}", err),

rog-control-center/src/lib.rs

@@ -13,11 +13,11 @@ pub mod config;
 pub mod error;
 #[cfg(feature = "mocking")]
 pub mod mocking;
-pub mod notify;
 pub mod pages;
 pub mod startup_error;
 pub mod system_state;
 pub mod tray;
+pub mod update_and_notify;
 pub mod widgets;
 
 #[cfg(feature = "mocking")]

rog-control-center/src/main.rs

@@ -1,12 +1,12 @@
 use eframe::{IconData, NativeOptions};
-use log::{error, info, LevelFilter};
+use log::{error, info};
 use rog_aura::layouts::KeyLayout;
-use rog_control_center::notify::EnabledNotifications;
 use rog_control_center::tray::init_tray;
+use rog_control_center::update_and_notify::EnabledNotifications;
 use rog_control_center::{
-    config::Config, error::Result, get_ipc_file, notify::start_notifications, on_tmp_dir_exists,
-    print_versions, startup_error::AppErrorShow, system_state::SystemState, RogApp,
-    RogDbusClientBlocking, SHOWING_GUI, SHOW_GUI,
+    config::Config, error::Result, get_ipc_file, on_tmp_dir_exists, print_versions,
+    startup_error::AppErrorShow, system_state::SystemState, update_and_notify::start_notifications,
+    RogApp, RogDbusClientBlocking, SHOWING_GUI, SHOW_GUI,
 };
 use rog_platform::supported::SupportedFunctions;
 use std::sync::Mutex;
@@ -29,9 +29,9 @@ fn main() -> Result<()> {
     print_versions();
     let mut logger = env_logger::Builder::new();
     logger
+        .parse_default_env()
         .target(env_logger::Target::Stdout)
         .format(|buf, record| writeln!(buf, "{}: {}", record.level(), record.args()))
-        .filter(None, LevelFilter::Info)
         .init();
 
     // start tokio
@@ -118,7 +118,7 @@ fn main() -> Result<()> {
         Err(_) => on_tmp_dir_exists().unwrap(),
     };
 
-    let states = setup_page_state_and_notifs(layout, enabled_notifications, &supported)?;
+    let states = setup_page_state_and_notifs(layout, enabled_notifications, &config, &supported)?;
 
     init_tray(supported, states.clone());
 
@@ -153,6 +153,7 @@ fn main() -> Result<()> {
 fn setup_page_state_and_notifs(
     keyboard_layout: KeyLayout,
     enabled_notifications: Arc<Mutex<EnabledNotifications>>,
+    config: &Config,
     supported: &SupportedFunctions,
 ) -> Result<Arc<Mutex<SystemState>>> {
     let page_states = Arc::new(Mutex::new(SystemState::new(
@@ -161,7 +162,7 @@ fn setup_page_state_and_notifs(
         supported,
     )?));
 
-    start_notifications(page_states.clone(), enabled_notifications)?;
+    start_notifications(config, page_states.clone(), enabled_notifications)?;
 
     Ok(page_states)
 }
@@ -206,7 +207,7 @@ fn load_icon() -> IconData {
             }
         }
     } else {
-        error!("Missing {APP_ICON_PATH}")
+        error!("Missing {APP_ICON_PATH}");
     }
 
     IconData {

rog-control-center/src/pages/fan_curve_page.rs

@@ -22,7 +22,7 @@ impl RogApp {
                 ui,
             );
 
-            fan_graphs(supported, &mut states.profiles, &mut states.fan_curves, &states.asus_dbus, &mut states.error, ui);
+            fan_graphs(supported, &mut states.fan_curves, &states.asus_dbus, &mut states.error, ui);
         });
     }
 
@@ -30,7 +30,7 @@ impl RogApp {
         supported: &SupportedFunctions,
         profiles: &mut ProfilesState,
         curves: &mut FanCurvesState,
-        dbus: &RogDbusClientBlocking,
+        dbus: &RogDbusClientBlocking<'_>,
         do_error: &mut Option<String>,
         ui: &mut Ui,
     ) {
@@ -62,7 +62,7 @@ impl RogApp {
             };
 
             profiles.list.sort();
-            for f in profiles.list.iter() {
+            for f in &profiles.list {
                 item(*f, curves, curves.enabled.contains(f));
             }
         });

rog-control-center/src/system_state.rs

@@ -12,9 +12,10 @@ use supergfxctl::{
     zbus_proxy::DaemonProxyBlocking as GfxProxyBlocking,
 };
 
-use crate::{error::Result, notify::EnabledNotifications, RogDbusClientBlocking};
+use crate::{error::Result, update_and_notify::EnabledNotifications, RogDbusClientBlocking};
+use log::error;
 
-#[derive(Clone, Debug)]
+#[derive(Clone, Debug, Default)]
 pub struct BiosState {
     /// To be shared to a thread that checks notifications.
     /// It's a bit general in that it won't provide *what* was
@@ -27,7 +28,7 @@ pub struct BiosState {
 }
 
 impl BiosState {
-    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking) -> Result<Self> {
+    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking<'_>) -> Result<Self> {
         Ok(Self {
             post_sound: if supported.rog_bios_ctrl.post_sound {
                 dbus.proxies().rog_bios().post_boot_sound()? != 0
@@ -51,14 +52,14 @@ impl BiosState {
     }
 }
 
-#[derive(Clone, Debug)]
+#[derive(Clone, Debug, Default)]
 pub struct ProfilesState {
     pub list: Vec<Profile>,
     pub current: Profile,
 }
 
 impl ProfilesState {
-    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking) -> Result<Self> {
+    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking<'_>) -> Result<Self> {
         Ok(Self {
             list: if supported.platform_profile.platform_profile {
                 let mut list = dbus.proxies().profile().profiles()?;
@@ -76,7 +77,7 @@ impl ProfilesState {
     }
 }
 
-#[derive(Clone, Debug)]
+#[derive(Clone, Debug, Default)]
 pub struct FanCurvesState {
     pub show_curve: Profile,
     pub show_graph: FanCurvePU,
@@ -86,26 +87,25 @@ pub struct FanCurvesState {
 }
 
 impl FanCurvesState {
-    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking) -> Result<Self> {
+    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking<'_>) -> Result<Self> {
         let profiles = if supported.platform_profile.platform_profile {
             dbus.proxies().profile().profiles()?
         } else {
             vec![Profile::Balanced, Profile::Quiet, Profile::Performance]
         };
         let enabled = if supported.platform_profile.fan_curves {
-            HashSet::from_iter(
-                dbus.proxies()
-                    .profile()
-                    .enabled_fan_profiles()?
-                    .iter()
-                    .cloned(),
-            )
+            dbus.proxies()
+                .profile()
+                .enabled_fan_profiles()?
+                .iter()
+                .cloned()
+                .collect::<HashSet<_>>()
         } else {
             HashSet::from([Profile::Balanced, Profile::Quiet, Profile::Performance])
         };
 
         let mut curves: BTreeMap<Profile, FanCurveSet> = BTreeMap::new();
-        profiles.iter().for_each(|p| {
+        for p in &profiles {
             if supported.platform_profile.fan_curves {
                 if let Ok(curve) = dbus.proxies().profile().fan_curve_data(*p) {
                     curves.insert(*p, curve);
@@ -118,7 +118,7 @@ impl FanCurvesState {
                 curve.gpu.temp = [20, 30, 40, 50, 70, 80, 90, 100];
                 curves.insert(*p, curve);
             }
-        });
+        }
 
         let show_curve = if supported.platform_profile.fan_curves {
             dbus.proxies().profile().active_profile()?
@@ -136,7 +136,7 @@ impl FanCurvesState {
     }
 }
 
-#[derive(Clone, Debug)]
+#[derive(Clone, Debug, Default)]
 pub struct AuraState {
     pub current_mode: AuraModeNum,
     pub modes: BTreeMap<AuraModeNum, AuraEffect>,
@@ -149,7 +149,7 @@ pub struct AuraState {
 }
 
 impl AuraState {
-    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking) -> Result<Self> {
+    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking<'_>) -> Result<Self> {
         Ok(Self {
             current_mode: if !supported.keyboard_led.stock_led_modes.is_empty() {
                 dbus.proxies().led().led_mode().unwrap_or_default()
@@ -189,7 +189,7 @@ impl AuraState {
     }
 }
 
-#[derive(Clone, Debug)]
+#[derive(Clone, Debug, Default)]
 pub struct AnimeState {
     pub bright: u8,
     pub boot: bool,
@@ -198,7 +198,7 @@ pub struct AnimeState {
 }
 
 impl AnimeState {
-    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking) -> Result<Self> {
+    pub fn new(supported: &SupportedFunctions, dbus: &RogDbusClientBlocking<'_>) -> Result<Self> {
         Ok(Self {
             boot: if supported.anime_ctrl.0 {
                 dbus.proxies().anime().boot_enabled()?
@@ -219,27 +219,39 @@ impl AnimeState {
 
 #[derive(Clone, Debug)]
 pub struct GfxState {
+    pub has_supergfx: bool,
     pub mode: GfxMode,
     pub power_status: GfxPower,
 }
 
 impl GfxState {
-    pub fn new(_supported: &SupportedFunctions, dbus: &GfxProxyBlocking) -> Result<Self> {
+    pub fn new(_supported: &SupportedFunctions, dbus: &GfxProxyBlocking<'_>) -> Result<Self> {
         Ok(Self {
-            mode: dbus.mode()?,
-            power_status: dbus.power()?,
+            has_supergfx: dbus.mode().is_ok(),
+            mode: dbus.mode().unwrap_or(GfxMode::None),
+            power_status: dbus.power().unwrap_or(GfxPower::Unknown),
         })
     }
 }
 
-#[derive(Clone, Debug)]
+impl Default for GfxState {
+    fn default() -> Self {
+        Self {
+            has_supergfx: false,
+            mode: GfxMode::None,
+            power_status: GfxPower::Unknown,
+        }
+    }
+}
+
+#[derive(Clone, Debug, Default)]
 pub struct PowerState {
     pub charge_limit: u8,
     pub ac_power: bool,
 }
 
 impl PowerState {
-    pub fn new(_supported: &SupportedFunctions, dbus: &RogDbusClientBlocking) -> Result<Self> {
+    pub fn new(_supported: &SupportedFunctions, dbus: &RogDbusClientBlocking<'_>) -> Result<Self> {
         Ok(Self {
             charge_limit: dbus.proxies().charge().charge_control_end_threshold()?,
             ac_power: dbus.proxies().charge().mains_online()?,
@@ -277,19 +289,62 @@ impl SystemState {
         enabled_notifications: Arc<Mutex<EnabledNotifications>>,
         supported: &SupportedFunctions,
     ) -> Result<Self> {
-        let (asus_dbus, conn) = RogDbusClientBlocking::new().unwrap();
-        let gfx_dbus = GfxProxyBlocking::new(&conn).unwrap();
+        let (asus_dbus, conn) = RogDbusClientBlocking::new()?;
+        let mut error = None;
+        let gfx_dbus = GfxProxyBlocking::new(&conn).expect("Couldn't connect to supergfxd");
         Ok(Self {
             keyboard_layout,
             enabled_notifications,
-            power_state: PowerState::new(supported, &asus_dbus)?,
-            bios: BiosState::new(supported, &asus_dbus)?,
-            aura: AuraState::new(supported, &asus_dbus)?,
-            anime: AnimeState::new(supported, &asus_dbus)?,
-            profiles: ProfilesState::new(supported, &asus_dbus)?,
-            fan_curves: FanCurvesState::new(supported, &asus_dbus)?,
-            gfx_state: GfxState::new(supported, &gfx_dbus)?,
-            error: None,
+            power_state: PowerState::new(supported, &asus_dbus)
+                .map_err(|e| {
+                    let e = format!("Could not get PowerState state: {e}");
+                    error!("{e}");
+                    error = Some(e);
+                })
+                .unwrap_or_default(),
+            bios: BiosState::new(supported, &asus_dbus)
+                .map_err(|e| {
+                    let e = format!("Could not get BiosState state: {e}");
+                    error!("{e}");
+                    error = Some(e);
+                })
+                .unwrap_or_default(),
+            aura: AuraState::new(supported, &asus_dbus)
+                .map_err(|e| {
+                    let e = format!("Could not get AuraState state: {e}");
+                    error!("{e}");
+                    error = Some(e);
+                })
+                .unwrap_or_default(),
+            anime: AnimeState::new(supported, &asus_dbus)
+                .map_err(|e| {
+                    let e = format!("Could not get AanimeState state: {e}");
+                    error!("{e}");
+                    error = Some(e);
+                })
+                .unwrap_or_default(),
+            profiles: ProfilesState::new(supported, &asus_dbus)
+                .map_err(|e| {
+                    let e = format!("Could not get ProfilesState state: {e}");
+                    error!("{e}");
+                    error = Some(e);
+                })
+                .unwrap_or_default(),
+            fan_curves: FanCurvesState::new(supported, &asus_dbus)
+                .map_err(|e| {
+                    let e = format!("Could not get FanCurvesState state: {e}");
+                    error!("{e}");
+                    error = Some(e);
+                })
+                .unwrap_or_default(),
+            gfx_state: GfxState::new(supported, &gfx_dbus)
+                .map_err(|e| {
+                    let e = format!("Could not get supergfxd state: {e}");
+                    error!("{e}");
+                    error = Some(e);
+                })
+                .unwrap_or_default(),
+            error,
             tray_should_update: true,
             app_should_update: true,
             asus_dbus,
@@ -305,8 +360,8 @@ impl SystemState {
 
 impl Default for SystemState {
     fn default() -> Self {
-        let (asus_dbus, conn) = RogDbusClientBlocking::new().unwrap();
-        let gfx_dbus = GfxProxyBlocking::new(&conn).unwrap();
+        let (asus_dbus, conn) = RogDbusClientBlocking::new().expect("Couldn't connect to asusd");
+        let gfx_dbus = GfxProxyBlocking::new(&conn).expect("Couldn't connect to supergfxd");
 
         Self {
             keyboard_layout: KeyLayout::ga401_layout(),
@@ -349,6 +404,7 @@ impl Default for SystemState {
                 drag_delta: Default::default(),
             },
             gfx_state: GfxState {
+                has_supergfx: false,
                 mode: GfxMode::None,
                 power_status: GfxPower::Unknown,
             },

rog-control-center/src/tray.rs

@@ -4,6 +4,7 @@
 use std::{
     io::Write,
     sync::{
+        atomic::{AtomicBool, Ordering},
         mpsc::{channel, Receiver},
         Arc, Mutex,
     },
@@ -21,7 +22,7 @@ use supergfxctl::{
     zbus_proxy::DaemonProxyBlocking as GfxProxyBlocking,
 };
 
-use log::{debug, error, info, trace};
+use log::{debug, error, info, trace, warn};
 
 const TRAY_APP_ICON: &str = "rog-control-center";
 const TRAY_LABEL: &str = "ROG Control Center";
@@ -128,13 +129,18 @@ impl ROGTray {
         self.menu.show_all();
     }
 
-    fn add_radio_sub_menu(&mut self, header_label: &str, active_label: &str, sub_menu: RadioGroup) {
+    fn add_radio_sub_menu(
+        &mut self,
+        header_label: &str,
+        active_label: &str,
+        sub_menu: &RadioGroup,
+    ) {
         let header_item = gtk::MenuItem::with_label(header_label);
         header_item.show_all();
         self.menu.add(&header_item);
 
         let menu = gtk::Menu::new();
-        for item in sub_menu.0.iter() {
+        for item in &sub_menu.0 {
             if let Some(label) = item.label() {
                 item.set_active(label == active_label);
             } else {
@@ -197,7 +203,7 @@ impl ROGTray {
     }
 
     fn _set_status(&mut self, status: AppIndicatorStatus) {
-        self.tray.set_status(status)
+        self.tray.set_status(status);
     }
 
     fn menu_add_base(&mut self) {
@@ -236,7 +242,10 @@ impl ROGTray {
     }
 
     fn menu_add_gpu(&mut self, supported: &SupportedFunctions, current_mode: GfxMode) {
+        let set_mux_off = Arc::new(AtomicBool::new(false));
+
         let gfx_dbus = self.gfx_proxy.clone();
+        let set_mux_off1 = set_mux_off.clone();
         let mut gpu_menu = RadioGroup::new("Integrated", move |_| {
             let mode = gfx_dbus
                 .mode()
@@ -254,9 +263,11 @@ impl ROGTray {
                     })
                     .ok();
             }
+            set_mux_off1.store(true, Ordering::Relaxed);
         });
 
         let gfx_dbus = self.gfx_proxy.clone();
+        let set_mux_off1 = set_mux_off.clone();
         gpu_menu.add("Hybrid", move |_| {
             let mode = gfx_dbus
                 .mode()
@@ -274,7 +285,33 @@ impl ROGTray {
                     })
                     .ok();
             }
+            set_mux_off1.store(true, Ordering::Relaxed);
         });
+        if supported.rog_bios_ctrl.egpu_enable {
+            let set_mux_off1 = set_mux_off.clone();
+            let gfx_dbus = self.gfx_proxy.clone();
+            gpu_menu.add("eGPU", move |_| {
+                let mode = gfx_dbus
+                    .mode()
+                    .map_err(|e| {
+                        error!("ROGTray: mode: {e}");
+                        e
+                    })
+                    .unwrap_or(GfxMode::None);
+                if mode != GfxMode::Egpu {
+                    gfx_dbus
+                        .set_mode(&GfxMode::Egpu)
+                        .map_err(|e| {
+                            error!("ROGTray: set_mode: {e}");
+                            e
+                        })
+                        .ok();
+                }
+                set_mux_off1.store(true, Ordering::Relaxed);
+            });
+        }
+
+        let mut reboot_required = false;
         if supported.rog_bios_ctrl.gpu_mux {
             let gfx_dbus = self.bios_proxy.clone();
             gpu_menu.add("Ultimate (Reboot required)", move |_| {
@@ -295,37 +332,97 @@ impl ROGTray {
                         .ok();
                 }
             });
-        }
-        if supported.rog_bios_ctrl.egpu_enable {
-            let gfx_dbus = self.gfx_proxy.clone();
-            gpu_menu.add("eGPU", move |_| {
-                let mode = gfx_dbus
-                    .mode()
+
+            if set_mux_off.load(Ordering::Relaxed) {
+                warn!("Selected non-dgpu mode, must set MUX to optimus");
+                self.bios_proxy
+                    .set_gpu_mux_mode(GpuMode::Optimus)
                     .map_err(|e| {
-                        error!("ROGTray: mode: {e}");
+                        error!("ROGTray: set_mode: {e}");
                         e
                     })
-                    .unwrap_or(GfxMode::None);
-                if mode != GfxMode::Egpu {
-                    gfx_dbus
-                        .set_mode(&GfxMode::Egpu)
-                        .map_err(|e| {
-                            error!("ROGTray: set_mode: {e}");
-                            e
-                        })
-                        .ok();
-                }
-            });
+                    .ok();
+            }
+
+            if let Ok(mode) = self.bios_proxy.gpu_mux_mode() {
+                let mode = match mode {
+                    GpuMode::Discrete => GfxMode::AsusMuxDiscreet,
+                    _ => GfxMode::Hybrid,
+                };
+                reboot_required = mode != current_mode;
+            }
         }
 
         let active = match current_mode {
-            GfxMode::AsusMuxDiscreet => "Discreet".to_string(),
+            GfxMode::AsusMuxDiscreet => "Discreet".to_owned(),
             _ => current_mode.to_string(),
         };
+
+        let reboot_required = if reboot_required {
+            "(Reboot required)"
+        } else {
+            ""
+        };
+
         self.add_radio_sub_menu(
-            &format!("GPU Mode: {current_mode}"),
+            &format!("GPU Mode: {active} {reboot_required}"),
             active.as_str(),
-            gpu_menu,
+            &gpu_menu,
+        );
+
+        debug!("ROGTray: appended gpu menu");
+    }
+
+    fn menu_add_mux(&mut self, current_mode: GfxMode) {
+        let gfx_dbus = self.bios_proxy.clone();
+
+        let mut reboot_required = false;
+        if let Ok(mode) = gfx_dbus.gpu_mux_mode() {
+            let mode = match mode {
+                GpuMode::Discrete => GfxMode::AsusMuxDiscreet,
+                _ => GfxMode::Hybrid,
+            };
+            reboot_required = mode != current_mode;
+        }
+
+        let mut gpu_menu = RadioGroup::new("Optimus", move |_| {
+            gfx_dbus
+                .set_gpu_mux_mode(GpuMode::Optimus)
+                .map_err(|e| {
+                    error!("ROGTray: set_mode: {e}");
+                    e
+                })
+                .ok();
+            debug!("Setting GPU mode: {}", GpuMode::Optimus);
+        });
+
+        let gfx_dbus = self.bios_proxy.clone();
+        gpu_menu.add("Ultimate", move |_| {
+            gfx_dbus
+                .set_gpu_mux_mode(GpuMode::Discrete)
+                .map_err(|e| {
+                    error!("ROGTray: set_mode: {e}");
+                    e
+                })
+                .ok();
+            debug!("Setting GPU mode: {}", GpuMode::Discrete);
+        });
+
+        let active = match current_mode {
+            GfxMode::AsusMuxDiscreet => "Ultimate".to_owned(),
+            GfxMode::Hybrid => "Optimus".to_owned(),
+            _ => current_mode.to_string(),
+        };
+        debug!("Current active GPU mode: {}", active);
+        let reboot_required = if reboot_required {
+            "(Reboot required)"
+        } else {
+            ""
+        };
+        self.add_radio_sub_menu(
+            &format!("GPU Mode: {active} {reboot_required}"),
+            active.as_str(),
+            &gpu_menu,
         );
 
         debug!("ROGTray: appended gpu menu");
@@ -346,6 +443,7 @@ impl ROGTray {
     fn rebuild_and_update(
         &mut self,
         supported: &SupportedFunctions,
+        has_supergfx: bool,
         current_gfx_mode: GfxMode,
         charge_limit: u8,
         panel_od: bool,
@@ -354,7 +452,11 @@ impl ROGTray {
         self.menu_add_base();
         self.menu_add_charge_limit(supported, charge_limit);
         self.menu_add_panel_od(supported, panel_od);
-        self.menu_add_gpu(supported, current_gfx_mode);
+        if has_supergfx {
+            self.menu_add_gpu(supported, current_gfx_mode);
+        } else if supported.rog_bios_ctrl.gpu_mux {
+            self.menu_add_mux(current_gfx_mode);
+        }
         self.menu_update();
     }
 }
@@ -366,6 +468,12 @@ pub fn init_tray(
     let (send, recv) = channel();
     let _send = Arc::new(Mutex::new(send));
 
+    let has_supergfx = if let Ok(lock) = states.try_lock() {
+        lock.gfx_state.has_supergfx
+    } else {
+        false
+    };
+
     std::thread::spawn(move || {
         if gtk::init()
             .map_err(|e| {
@@ -391,16 +499,26 @@ pub fn init_tray(
                 return;
             }
         };
-        tray.rebuild_and_update(&supported, GfxMode::Hybrid, 100, false);
+        tray.rebuild_and_update(&supported, has_supergfx, GfxMode::Hybrid, 100, false);
         tray.set_icon(TRAY_APP_ICON);
         info!("Started ROGTray");
 
         loop {
             if let Ok(mut lock) = states.lock() {
                 if lock.tray_should_update {
+                    // Supergfx ends up adding some complexity to handle if it isn't available
+                    let current_gpu_mode = if lock.gfx_state.has_supergfx {
+                        lock.gfx_state.mode
+                    } else {
+                        match lock.bios.dedicated_gfx {
+                            GpuMode::Discrete => GfxMode::AsusMuxDiscreet,
+                            _ => GfxMode::Hybrid,
+                        }
+                    };
                     tray.rebuild_and_update(
                         &supported,
-                        lock.gfx_state.mode,
+                        has_supergfx,
+                        current_gpu_mode,
                         lock.power_state.charge_limit,
                         lock.bios.panel_overdrive,
                     );
@@ -408,12 +526,19 @@ pub fn init_tray(
                     debug!("ROGTray: rebuilt menus due to state change");
 
                     match lock.gfx_state.power_status {
-                        GfxPower::Active => tray.set_icon("asus_notif_red"),
                         GfxPower::Suspended => tray.set_icon("asus_notif_blue"),
                         GfxPower::Off => tray.set_icon("asus_notif_green"),
                         GfxPower::AsusDisabled => tray.set_icon("asus_notif_white"),
-                        GfxPower::AsusMuxDiscreet => tray.set_icon("asus_notif_red"),
-                        GfxPower::Unknown => tray.set_icon("gpu-integrated"),
+                        GfxPower::AsusMuxDiscreet | GfxPower::Active => {
+                            tray.set_icon("asus_notif_red");
+                        }
+                        GfxPower::Unknown => {
+                            if has_supergfx {
+                                tray.set_icon("gpu-integrated");
+                            } else {
+                                tray.set_icon("asus_notif_red");
+                            }
+                        }
                     };
                 }
             }

rog-control-center/src/update_and_notify.rs

@@ -1,5 +1,9 @@
+//! `update_and_notify` is responsible for both notifications *and* updating stored statuses
+//! about the system state. This is done through either direct, intoify, zbus notifications
+//! or similar methods.
+
 use crate::{config::Config, error::Result, system_state::SystemState};
-use log::{error, info, trace};
+use log::{error, info, trace, warn};
 use notify_rust::{Hint, Notification, NotificationHandle, Urgency};
 use rog_dbus::{
     zbus_anime::AnimeProxy, zbus_led::LedProxy, zbus_platform::RogBiosProxy,
@@ -12,12 +16,17 @@ use std::{
     fmt::Display,
     process::Command,
     sync::{Arc, Mutex},
+    time::Duration,
 };
 use supergfxctl::{pci_device::GfxPower, zbus_proxy::DaemonProxy as SuperProxy};
+use tokio::time::sleep;
 use zbus::export::futures_util::{future, StreamExt};
 
 const NOTIF_HEADER: &str = "ROG Control";
 
+static mut POWER_AC_CMD: Option<Command> = None;
+static mut POWER_BAT_CMD: Option<Command> = None;
+
 #[derive(Debug, Clone, Deserialize, Serialize)]
 #[serde(default)]
 pub struct EnabledNotifications {
@@ -48,7 +57,7 @@ impl Default for EnabledNotifications {
             receive_notify_charge_control_end_threshold: true,
             receive_notify_mains_online: false,
             receive_notify_profile: true,
-            receive_notify_led: false,
+            receive_notify_led: true,
             receive_power_states: false,
             receive_notify_gfx: false,
             receive_notify_gfx_status: false,
@@ -125,11 +134,36 @@ macro_rules! recv_notif {
 type SharedHandle = Arc<Mutex<Option<NotificationHandle>>>;
 
 pub fn start_notifications(
+    config: &Config,
     page_states: Arc<Mutex<SystemState>>,
     enabled_notifications: Arc<Mutex<EnabledNotifications>>,
 ) -> Result<()> {
     let last_notification: SharedHandle = Arc::new(Mutex::new(None));
 
+    // Setup the AC/BAT commands that will run on poweer status change
+    unsafe {
+        let prog: Vec<&str> = config.ac_command.split_whitespace().collect();
+        if prog.len() > 1 {
+            let mut cmd = Command::new(prog[0]);
+
+            for arg in prog.iter().skip(1) {
+                cmd.arg(*arg);
+            }
+            POWER_AC_CMD = Some(cmd);
+        }
+    }
+    unsafe {
+        let prog: Vec<&str> = config.bat_command.split_whitespace().collect();
+        if prog.len() > 1 {
+            let mut cmd = Command::new(prog[0]);
+
+            for arg in prog.iter().skip(1) {
+                cmd.arg(*arg);
+            }
+            POWER_BAT_CMD = Some(cmd);
+        }
+    }
+
     // BIOS notif
     recv_notif!(
         RogBiosProxy,
@@ -179,18 +213,6 @@ pub fn start_notifications(
         do_notification
     );
 
-    recv_notif!(
-        RogBiosProxy,
-        receive_notify_gpu_mux_mode,
-        last_notification,
-        enabled_notifications,
-        page_states,
-        (bios.dedicated_gfx),
-        (mode),
-        "Reboot required. BIOS GPU MUX mode set to",
-        do_mux_notification
-    );
-
     // Charge notif
     recv_notif!(
         PowerProxy,
@@ -271,104 +293,139 @@ pub fn start_notifications(
         };
     });
 
-    recv_notif!(
-        SuperProxy,
-        receive_notify_gfx,
-        last_notification,
-        enabled_notifications,
-        page_states,
-        (gfx_state.mode),
-        (mode),
-        "Gfx mode changed to",
-        do_notification
-    );
-
-    // recv_notif!(
-    //     SuperProxy,
-    //     receive_notify_action,
-    //     bios_notified,
-    //     last_gfx_action_notif,
-    //     enabled_notifications,
-    //     [action],
-    //     "Gfx mode change requires",
-    //     do_gfx_action_notif
-    // );
-
+    let page_states1 = page_states.clone();
+    let last_notification1 = last_notification.clone();
     tokio::spawn(async move {
         let conn = zbus::Connection::system()
             .await
             .map_err(|e| {
-                error!("zbus signal: receive_notify_action: {e}");
+                error!("zbus signal: receive_notify_gpu_mux_mode: {e}");
                 e
             })
             .unwrap();
-        let proxy = SuperProxy::new(&conn)
+        let proxy = RogBiosProxy::new(&conn)
             .await
             .map_err(|e| {
-                error!("zbus signal: receive_notify_action: {e}");
+                error!("zbus signal: receive_notify_gpu_mux_mode: {e}");
                 e
             })
             .unwrap();
-        if let Ok(mut p) = proxy.receive_notify_action().await {
-            info!("Started zbus signal thread: receive_notify_action");
+        if let Ok(mut p) = proxy.receive_notify_gpu_mux_mode().await {
+            info!("Started zbus signal thread: receive_power_states");
             while let Some(e) = p.next().await {
                 if let Ok(out) = e.args() {
-                    let action = out.action();
-                    do_gfx_action_notif("Gfx mode change requires", &format!("{action:?}",))
-                        .map_err(|e| {
-                            error!("zbus signal: do_gfx_action_notif: {e}");
-                            e
-                        })
-                        .unwrap();
-                }
-            }
-        };
-    });
-
-    let notifs_enabled1 = enabled_notifications;
-    let last_notif = last_notification;
-    tokio::spawn(async move {
-        let conn = zbus::Connection::system()
-            .await
-            .map_err(|e| {
-                error!("zbus signal: receive_notify_gfx_status: {e}");
-                e
-            })
-            .unwrap();
-        let proxy = SuperProxy::new(&conn)
-            .await
-            .map_err(|e| {
-                error!("zbus signal: receive_notify_gfx_status: {e}");
-                e
-            })
-            .unwrap();
-        if let Ok(mut p) = proxy.receive_notify_gfx_status().await {
-            info!("Started zbus signal thread: receive_notify_gfx_status");
-            while let Some(e) = p.next().await {
-                if let Ok(out) = e.args() {
-                    let status = out.status;
-                    if status != GfxPower::Unknown {
-                        if let Ok(config) = notifs_enabled1.lock() {
-                            if config.all_enabled && config.receive_notify_gfx_status {
-                                // Required check because status cycles through active/unknown/suspended
-                                if let Ok(ref mut lock) = last_notif.lock() {
-                                    notify!(
-                                        do_gpu_status_notif("dGPU status changed:", &status),
-                                        lock
-                                    );
-                                }
-                            }
-                        }
-                        if let Ok(mut lock) = page_states.lock() {
-                            lock.gfx_state.power_status = status;
-                            lock.set_notified();
+                    if let Ok(mut lock) = page_states1.lock() {
+                        lock.bios.dedicated_gfx = out.mode;
+                        lock.set_notified();
+                    }
+                    if let Ok(ref mut lock) = last_notification1.lock() {
+                        if let Some(notif) = lock.take() {
+                            notif.close();
                         }
                     }
+                    do_mux_notification("Reboot required. BIOS GPU MUX mode set to", &out.mode)
+                        .ok();
                 }
             }
         };
     });
 
+    if let Ok(lock) = page_states.try_lock() {
+        use supergfxctl::pci_device::Device;
+        let dev = Device::find().unwrap_or_default();
+        let mut found_dgpu = false; // just for logging
+        for dev in dev {
+            if dev.is_dgpu() {
+                let notifs_enabled1 = enabled_notifications.clone();
+                let last_notif = last_notification.clone();
+                let page_states1 = page_states.clone();
+                // Plain old thread is perfectly fine since most of this is potentially blocking
+                tokio::spawn(async move {
+                    let mut last_status = GfxPower::Unknown;
+                    loop {
+                        if let Ok(status) = dev.get_runtime_status() {
+                            if status != GfxPower::Unknown && status != last_status {
+                                if let Ok(config) = notifs_enabled1.lock() {
+                                    if config.all_enabled && config.receive_notify_gfx_status {
+                                        // Required check because status cycles through active/unknown/suspended
+                                        if let Ok(ref mut lock) = last_notif.lock() {
+                                            notify!(
+                                                do_gpu_status_notif(
+                                                    "dGPU status changed:",
+                                                    &status
+                                                ),
+                                                lock
+                                            );
+                                        }
+                                    }
+                                }
+                                if let Ok(mut lock) = page_states1.lock() {
+                                    lock.gfx_state.power_status = status;
+                                    lock.set_notified();
+                                }
+                                last_status = status;
+                            }
+                        }
+                        sleep(Duration::from_millis(500)).await;
+                    }
+                });
+                found_dgpu = true;
+                break;
+            }
+        }
+        if !found_dgpu {
+            warn!("Did not find a dGPU on this system, dGPU status won't be avilable");
+        }
+
+        if lock.gfx_state.has_supergfx {
+            recv_notif!(
+                SuperProxy,
+                receive_notify_gfx,
+                last_notification,
+                enabled_notifications,
+                page_states,
+                (gfx_state.mode),
+                (mode),
+                "Gfx mode changed to",
+                do_notification
+            );
+
+            tokio::spawn(async move {
+                let conn = zbus::Connection::system()
+                    .await
+                    .map_err(|e| {
+                        error!("zbus signal: receive_notify_action: {e}");
+                        e
+                    })
+                    .unwrap();
+                let proxy = SuperProxy::new(&conn)
+                    .await
+                    .map_err(|e| {
+                        error!("zbus signal: receive_notify_action: {e}");
+                        e
+                    })
+                    .unwrap();
+                if let Ok(mut p) = proxy.receive_notify_action().await {
+                    info!("Started zbus signal thread: receive_notify_action");
+                    while let Some(e) = p.next().await {
+                        if let Ok(out) = e.args() {
+                            let action = out.action();
+                            do_gfx_action_notif(
+                                "Gfx mode change requires",
+                                &format!("{action:?}",),
+                            )
+                            .map_err(|e| {
+                                error!("zbus signal: do_gfx_action_notif: {e}");
+                                e
+                            })
+                            .unwrap();
+                        }
+                    }
+                };
+            });
+        }
+    }
+
     Ok(())
 }
 
@@ -397,9 +454,23 @@ where
 
 fn ac_power_notification(message: &str, on: &bool) -> Result<NotificationHandle> {
     let data = if *on {
-        "plugged".to_string()
+        unsafe {
+            if let Some(cmd) = POWER_AC_CMD.as_mut() {
+                if let Err(e) = cmd.spawn() {
+                    error!("AC power command error: {e}");
+                }
+            }
+        }
+        "plugged".to_owned()
     } else {
-        "unplugged".to_string()
+        unsafe {
+            if let Some(cmd) = POWER_BAT_CMD.as_mut() {
+                if let Err(e) = cmd.spawn() {
+                    error!("Battery power command error: {e}");
+                }
+            }
+        }
+        "unplugged".to_owned()
     };
     Ok(base_notification(message, &data).show()?)
 }
@@ -417,13 +488,12 @@ fn do_thermal_notif(message: &str, profile: &Profile) -> Result<NotificationHand
 
 fn do_gpu_status_notif(message: &str, data: &GfxPower) -> Result<NotificationHandle> {
     // eww
-    let mut notif = base_notification(message, &<&str>::from(data).to_string());
+    let mut notif = base_notification(message, &<&str>::from(data).to_owned());
     let icon = match data {
-        GfxPower::Active => "asus_notif_red",
         GfxPower::Suspended => "asus_notif_blue",
         GfxPower::Off => "asus_notif_green",
         GfxPower::AsusDisabled => "asus_notif_white",
-        GfxPower::AsusMuxDiscreet => "asus_notif_red",
+        GfxPower::AsusMuxDiscreet | GfxPower::Active => "asus_notif_red",
         GfxPower::Unknown => "gpu-integrated",
     };
     notif.icon(icon);
@@ -452,11 +522,25 @@ where
     Ok(())
 }
 
-/// Actual GpuMode unused as data is never correct until switched by reboot
-fn do_mux_notification(message: &str, _: &GpuMode) -> Result<NotificationHandle> {
-    let mut notif = base_notification(message, &"");
+/// Actual `GpuMode` unused as data is never correct until switched by reboot
+fn do_mux_notification(message: &str, m: &GpuMode) -> Result<()> {
+    let mut notif = base_notification(message, &m.to_string());
+    notif.action("gnome-session-quit", "Reboot");
     notif.urgency(Urgency::Critical);
     notif.icon("system-reboot-symbolic");
     notif.hint(Hint::Transient(true));
-    Ok(notif.show()?)
+    let handle = notif.show()?;
+
+    std::thread::spawn(|| {
+        handle.wait_for_action(|id| {
+            if id == "gnome-session-quit" {
+                let mut cmd = Command::new("gnome-session-quit");
+                cmd.arg("--reboot");
+                cmd.spawn().ok();
+            } else if id == "__closed" {
+                // TODO: cancel the switching
+            }
+        })
+    });
+    Ok(())
 }

rog-control-center/src/widgets/app_settings.rs

@@ -12,7 +12,8 @@ pub fn app_settings(config: &mut Config, states: &mut SystemState, ui: &mut Ui)
         Default::default()
     };
 
-    if ui
+    ui.label("Application settings");
+    let app_changed = ui
         .checkbox(&mut config.run_in_background, "Run in Background")
         .clicked()
         || ui
@@ -23,11 +24,19 @@ pub fn app_settings(config: &mut Config, states: &mut SystemState, ui: &mut Ui)
                 &mut enabled_notifications.all_enabled,
                 "Enable Notifications",
             )
-            .clicked()
+            .clicked();
+
+    ui.label("Notification settings");
+    let notif_changed = ui
+        .checkbox(
+            &mut enabled_notifications.receive_notify_gfx_status,
+            "Enable dGPU status notification",
+        )
+        .clicked()
         || ui
             .checkbox(
-                &mut enabled_notifications.receive_notify_gfx_status,
-                "Enable dGPU status notification",
+                &mut enabled_notifications.receive_notify_led,
+                "Enable LED mode change notification",
             )
             .clicked()
         || ui
@@ -71,8 +80,9 @@ pub fn app_settings(config: &mut Config, states: &mut SystemState, ui: &mut Ui)
                 &mut enabled_notifications.receive_notify_post_boot_sound,
                 "Enable BIOS post sound notification",
             )
-            .clicked()
-    {
+            .clicked();
+
+    if app_changed || notif_changed {
         if let Ok(mut lock) = states.enabled_notifications.lock() {
             // Replace inner content before save
             *lock = enabled_notifications;

rog-control-center/src/widgets/aura_power.rs

@@ -12,7 +12,7 @@ pub fn aura_power_group(supported: &SupportedFunctions, states: &mut SystemState
 
     match supported.keyboard_led.prod_id {
         AuraDevice::X1854 | AuraDevice::X1869 | AuraDevice::X1866 => {
-            aura_power1(supported, states, ui)
+            aura_power1(supported, states, ui);
         }
         AuraDevice::X19B6 => aura_power2(supported, states, ui),
         AuraDevice::Tuf => aura_power1(supported, states, ui),

rog-control-center/src/widgets/fan_graph.rs

@@ -2,16 +2,12 @@ use egui::{plot::Points, Ui};
 use rog_platform::supported::SupportedFunctions;
 use rog_profiles::{FanCurvePU, Profile};
 
-use crate::{
-    system_state::{FanCurvesState, ProfilesState},
-    RogDbusClientBlocking,
-};
+use crate::{system_state::FanCurvesState, RogDbusClientBlocking};
 
 pub fn fan_graphs(
     supported: &SupportedFunctions,
-    profiles: &mut ProfilesState,
     curves: &mut FanCurvesState,
-    dbus: &RogDbusClientBlocking,
+    dbus: &RogDbusClientBlocking<'_>,
     do_error: &mut Option<String>,
     ui: &mut Ui,
 ) {
@@ -36,14 +32,14 @@ pub fn fan_graphs(
     };
 
     ui.horizontal_wrapped(|ui| {
-        for a in curves.curves.iter() {
+        for a in &curves.curves {
             item(*a.0, ui);
         }
     });
 
     let curve = curves.curves.get_mut(&curves.show_curve).unwrap();
 
-    use egui::plot::{Line, Plot, PlotPoints};
+    use egui::plot::{Line, Plot};
 
     let data = if curves.show_graph == FanCurvePU::CPU {
         &mut curve.cpu
@@ -51,14 +47,40 @@ pub fn fan_graphs(
         &mut curve.gpu
     };
 
-    let points = data.temp.iter().enumerate().map(|(idx, x)| {
-        let x = *x as f64;
-        let y = ((data.pwm[idx] as u32) * 100 / 255) as f64;
-        [x, y]
-    });
+    let mut points: Vec<[f64; 2]> = data
+        .temp
+        .iter()
+        .enumerate()
+        .map(|(idx, x)| {
+            let x = *x as f64;
+            let y = ((data.pwm[idx] as u32) * 100 / 255) as f64;
+            [x, y]
+        })
+        .collect();
 
-    let line = Line::new(PlotPoints::from_iter(points.clone())).width(2.0);
-    let points = Points::new(PlotPoints::from_iter(points)).radius(3.0);
+    for i in 0..points.len() - 1 {
+        if i > 0 && i < points.len() - 1 {
+            if points[i][0] < points[i - 1][0] {
+                points[i][0] = points[i - 1][0] + 1.0;
+                data.temp[i] = points[i - 1][0] as u8;
+            }
+            if points[i][0] >= points[i + 1][0] {
+                points[i + 1][0] = points[i][0] + 1.0;
+                data.temp[i + 1] = points[i][0] as u8;
+            }
+            if points[i][1] < points[i - 1][1] {
+                points[i][1] = points[i - 1][1] + 1.0;
+                data.pwm[i] = (points[i - 1][1] * 255.0 / 100.0 + 1.0).floor() as u8;
+            }
+            if points[i][1] >= points[i + 1][1] {
+                points[i + 1][1] = points[i][1] + 1.0;
+                data.pwm[i + 1] = (points[i][1] * 255.0 / 100.0 + 1.0).floor() as u8;
+            }
+        }
+    }
+
+    let line = Line::new(points.clone()).width(2.0);
+    let points = Points::new(points).radius(3.0);
 
     Plot::new("fan_curves")
         .view_aspect(1.666)
@@ -85,7 +107,7 @@ pub fn fan_graphs(
                 let mut idx = 0;
 
                 if let Some(point) = plot_ui.pointer_coordinate() {
-                    let mut x: i32 = 255;
+                    let mut x: i32 = point.x as i32;
                     for (i, n) in data.temp.iter().enumerate() {
                         let tmp = x.min((point.x as i32 - *n as i32).abs());
                         if tmp < x {
@@ -107,30 +129,47 @@ pub fn fan_graphs(
                 }
             }
             plot_ui.line(line);
-            plot_ui.points(points)
+            plot_ui.points(points);
         });
 
     let mut set = false;
+    let mut clear = false;
     let mut reset = false;
     ui.with_layout(egui::Layout::right_to_left(egui::Align::TOP), |ui| {
-        set = ui.add(egui::Button::new("Apply Fan-curve")).clicked();
-        reset = ui.add(egui::Button::new("Reset Profile")).clicked();
+        set = ui.add(egui::Button::new("Apply Profile")).clicked();
+        clear = ui.add(egui::Button::new("Clear Profile Changes")).clicked();
+        reset = ui.add(egui::Button::new("Factory Reset Profile")).clicked();
     });
 
     if set {
         dbus.proxies()
             .profile()
-            .set_fan_curve(profiles.current, data.clone())
+            .set_fan_curve(curves.show_curve, data.clone())
             .map_err(|err| {
                 *do_error = Some(err.to_string());
             })
             .ok();
     }
 
+    if clear {
+        if let Ok(curve) = dbus
+            .proxies()
+            .profile()
+            .fan_curve_data(curves.show_curve)
+            .map_err(|err| {
+                *do_error = Some(err.to_string());
+            })
+        {
+            if let Some(value) = curves.curves.get_mut(&curves.show_curve) {
+                *value = curve;
+            }
+        }
+    }
+
     if reset {
         dbus.proxies()
             .profile()
-            .reset_profile_curves(profiles.current)
+            .reset_profile_curves(curves.show_curve)
             .map_err(|err| {
                 *do_error = Some(err.to_string());
             })

rog-control-center/src/widgets/rog_bios.rs

@@ -17,7 +17,7 @@ pub fn platform_profile(states: &mut SystemState, ui: &mut Ui) {
     };
 
     ui.horizontal_wrapped(|ui| {
-        for a in states.profiles.list.iter() {
+        for a in &states.profiles.list {
             item(*a, ui);
         }
     });
@@ -46,7 +46,7 @@ pub fn rog_bios_group(supported: &SupportedFunctions, states: &mut SystemState,
             .asus_dbus
             .proxies()
             .charge()
-            .set_charge_control_end_threshold(states.power_state.charge_limit as u8)
+            .set_charge_control_end_threshold(states.power_state.charge_limit)
             .map_err(|err| {
                 states.error = Some(err.to_string());
             })
@@ -93,6 +93,13 @@ pub fn rog_bios_group(supported: &SupportedFunctions, states: &mut SystemState,
 
     if supported.rog_bios_ctrl.gpu_mux {
         let mut changed = false;
+        let mut dedicated_gfx = states.bios.dedicated_gfx;
+
+        let mut reboot_required = false;
+        if let Ok(mode) = states.asus_dbus.proxies().rog_bios().gpu_mux_mode() {
+            reboot_required = mode != states.bios.dedicated_gfx;
+        }
+
         ui.group(|ui| {
             ui.vertical(|ui| {
                 ui.horizontal_wrapped(|ui| ui.label("GPU MUX mode"));
@@ -100,19 +107,23 @@ pub fn rog_bios_group(supported: &SupportedFunctions, states: &mut SystemState,
                 ui.horizontal_wrapped(|ui| {
                     changed = ui
                         .selectable_value(
-                            &mut states.bios.dedicated_gfx,
+                            &mut dedicated_gfx,
                             GpuMode::Discrete,
                             "Dedicated (Ultimate)",
                         )
                         .clicked()
                         || ui
                             .selectable_value(
-                                &mut states.bios.dedicated_gfx,
+                                &mut dedicated_gfx,
                                 GpuMode::Optimus,
                                 "Optimus (Hybrid)",
                             )
                             .clicked();
                 });
+
+                if reboot_required {
+                    ui.horizontal_wrapped(|ui| ui.heading("REBOOT REQUIRED"));
+                }
             });
         });
 
@@ -121,7 +132,7 @@ pub fn rog_bios_group(supported: &SupportedFunctions, states: &mut SystemState,
                 .asus_dbus
                 .proxies()
                 .rog_bios()
-                .set_gpu_mux_mode(states.bios.dedicated_gfx)
+                .set_gpu_mux_mode(dedicated_gfx)
                 .map_err(|err| {
                     states.error = Some(err.to_string());
                 })

rog-dbus/src/lib.rs

@@ -81,7 +81,7 @@ impl<'a> RogDbusClientBlocking<'a> {
         Ok((RogDbusClientBlocking { proxies }, conn))
     }
 
-    pub fn proxies(&self) -> &DbusProxiesBlocking {
+    pub fn proxies(&self) -> &DbusProxiesBlocking<'_> {
         &self.proxies
     }
 }
@@ -150,7 +150,7 @@ impl<'a> RogDbusClient<'a> {
         Ok((RogDbusClient { proxies }, conn))
     }
 
-    pub fn proxies(&self) -> &DbusProxies {
+    pub fn proxies(&self) -> &DbusProxies<'_> {
         &self.proxies
     }
 }

rog-platform/Cargo.toml

@@ -1,5 +1,6 @@
 [package]
 name = "rog_platform"
+license = "MPL-2.0"
 version.workspace = true
 edition = "2021"
 
@@ -14,4 +15,4 @@ concat-idents.workspace = true
 udev.workspace = true
 inotify.workspace = true
 
-rusb.workspace = true
+rusb.workspace = true

rog-platform/src/error.rs

@@ -23,7 +23,7 @@ pub enum PlatformError {
 
 impl fmt::Display for PlatformError {
     // This trait requires `fmt` with this exact signature.
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
         match self {
             PlatformError::ParseVendor => write!(f, "Parse gfx vendor error"),
             PlatformError::ParseNum => write!(f, "Parse number error"),

rog-platform/src/lib.rs

@@ -19,7 +19,7 @@ pub const VERSION: &str = env!("CARGO_PKG_VERSION");
 
 pub(crate) fn to_device(sys_path: &Path) -> Result<Device> {
     Device::from_syspath(sys_path)
-        .map_err(|e| PlatformError::Udev("Couldn't transform syspath to device".to_string(), e))
+        .map_err(|e| PlatformError::Udev("Couldn't transform syspath to device".to_owned(), e))
 }
 
 pub fn has_attr(device: &Device, attr_name: &str) -> bool {
@@ -39,7 +39,7 @@ pub fn read_attr_bool(device: &Device, attr_name: &str) -> Result<bool> {
         }
         return Ok(true);
     }
-    Err(PlatformError::AttrNotFound(attr_name.to_string()))
+    Err(PlatformError::AttrNotFound(attr_name.to_owned()))
 }
 
 pub fn write_attr_bool(device: &mut Device, attr: &str, value: bool) -> Result<()> {
@@ -53,7 +53,7 @@ pub fn read_attr_u8(device: &Device, attr_name: &str) -> Result<u8> {
         let tmp = value.to_string_lossy();
         return tmp.parse::<u8>().map_err(|_| PlatformError::ParseNum);
     }
-    Err(PlatformError::AttrNotFound(attr_name.to_string()))
+    Err(PlatformError::AttrNotFound(attr_name.to_owned()))
 }
 
 pub fn write_attr_u8(device: &mut Device, attr: &str, value: u8) -> Result<()> {
@@ -71,7 +71,7 @@ pub fn read_attr_u8_array(device: &Device, attr_name: &str) -> Result<Vec<u8>> {
             .collect();
         return Ok(tmp);
     }
-    Err(PlatformError::AttrNotFound(attr_name.to_string()))
+    Err(PlatformError::AttrNotFound(attr_name.to_owned()))
 }
 
 pub fn write_attr_u8_array(device: &mut Device, attr: &str, values: &[u8]) -> Result<()> {

rog-platform/src/platform.rs

@@ -11,12 +11,12 @@ use crate::{
 };
 
 /// The "platform" device provides access to things like:
-/// - dgpu_disable
-/// - egpu_enable
-/// - panel_od
-/// - gpu_mux
-/// - keyboard_mode, set keyboard RGB mode and speed
-/// - keyboard_state, set keyboard power states
+/// - `dgpu_disable`
+/// - `egpu_enable`
+/// - `panel_od`
+/// - `gpu_mux`
+/// - `keyboard_mode`, set keyboard RGB mode and speed
+/// - `keyboard_state`, set keyboard power states
 #[derive(Debug, PartialEq, Eq, PartialOrd, Clone)]
 pub struct AsusPlatform {
     path: PathBuf,
@@ -65,12 +65,13 @@ impl AsusPlatform {
     attr_u8!("platform_profile", pp_path);
 }
 
-#[derive(Serialize, Deserialize, Type, Debug, PartialEq, Eq, Clone, Copy)]
+#[derive(Serialize, Deserialize, Default, Type, Debug, PartialEq, Eq, Clone, Copy)]
 pub enum GpuMode {
     Discrete,
     Optimus,
     Integrated,
     Egpu,
+    #[default]
     Error,
     NotSupported,
 }

rog-platform/src/power.rs

@@ -9,12 +9,12 @@ use crate::{
 };
 
 /// The "platform" device provides access to things like:
-/// - dgpu_disable
-/// - egpu_enable
-/// - panel_od
-/// - gpu_mux
-/// - keyboard_mode, set keyboard RGB mode and speed
-/// - keyboard_state, set keyboard power states
+/// - `dgpu_disable`
+/// - `egpu_enable`
+/// - `panel_od`
+/// - `gpu_mux`
+/// - `keyboard_mode`, set keyboard RGB mode and speed
+/// - `keyboard_state`, set keyboard power states
 #[derive(Debug, PartialEq, Eq, PartialOrd, Clone)]
 pub struct AsusPower {
     mains: PathBuf,

rog-platform/src/usb_raw.rs

@@ -11,7 +11,7 @@ impl USBRaw {
         for device in rusb::devices()?.iter() {
             let device_desc = device.device_descriptor()?;
             if device_desc.vendor_id() == 0x0b05 && device_desc.product_id() == id_product {
-                let handle = Self::get_dev_handle(device)?;
+                let handle = Self::get_dev_handle(&device)?;
                 return Ok(Self(handle));
             }
         }
@@ -23,7 +23,7 @@ impl USBRaw {
     }
 
     fn get_dev_handle(
-        device: Device<rusb::GlobalContext>,
+        device: &Device<rusb::GlobalContext>,
     ) -> Result<DeviceHandle<rusb::GlobalContext>> {
         // We don't expect this ID to ever change
         let mut device = device.open()?;

rog-profiles/Cargo.toml

@@ -1,5 +1,6 @@
 [package]
 name = "rog_profiles"
+license = "MPL-2.0"
 version.workspace = true
 authors = ["Luke D. Jones <luke@ljones.dev>"]
 edition = "2021"
@@ -13,4 +14,4 @@ udev.workspace = true
 serde.workspace = true
 serde_derive.workspace = true
 
-zbus = { workspace = true, optional = true }
+zbus = { workspace = true, optional = true }

rog-profiles/src/lib.rs

@@ -72,6 +72,14 @@ impl Profile {
         file.write_all(<&str>::from(profile).as_bytes())?;
         Ok(())
     }
+
+    pub fn from_throttle_thermal_policy(num: u8) -> Self {
+        match num {
+            1 => Self::Performance,
+            2 => Self::Quiet,
+            _ => Self::Balanced,
+        }
+    }
 }
 
 impl Default for Profile {
@@ -93,7 +101,6 @@ impl From<Profile> for &str {
 impl From<&str> for Profile {
     fn from(profile: &str) -> Profile {
         match profile.to_ascii_lowercase().trim() {
-            "balanced" => Profile::Balanced,
             "performance" => Profile::Performance,
             "quiet" => Profile::Quiet,
             _ => Profile::Balanced,
@@ -202,7 +209,7 @@ impl FanCurveProfiles {
 
     /// Reset the stored (self) and device curve to the defaults of the platform.
     ///
-    /// Each platform_profile has a different default and the defualt can be read
+    /// Each `platform_profile` has a different default and the defualt can be read
     /// only for the currently active profile.
     pub fn set_active_curve_to_defaults(
         &mut self,
@@ -296,12 +303,12 @@ impl FanCurveProfiles {
                 FanCurvePU::GPU => &self.balanced.gpu,
             },
             Profile::Performance => match pu {
-                FanCurvePU::CPU => &self.balanced.cpu,
-                FanCurvePU::GPU => &self.balanced.gpu,
+                FanCurvePU::CPU => &self.performance.cpu,
+                FanCurvePU::GPU => &self.performance.gpu,
             },
             Profile::Quiet => match pu {
-                FanCurvePU::CPU => &self.balanced.cpu,
-                FanCurvePU::GPU => &self.balanced.gpu,
+                FanCurvePU::CPU => &self.quiet.cpu,
+                FanCurvePU::GPU => &self.quiet.gpu,
             },
         }
     }

rust-toolchain

@@ -0,0 +1,9 @@
+# If you see this, run "rustup self update" to get rustup 1.23 or newer.
+
+# NOTE: above comment is for older `rustup` (before TOML support was added),
+# which will treat the first line as the toolchain name, and therefore show it
+# to the user in the error, instead of "error: invalid channel name '[toolchain]'".
+
+[toolchain]
+channel = "1.65.0"
+components = [ "rustfmt", "clippy" ]