# pylint: disable=wildcard-import, unused-wildcard-import, protected-access, unused-argument, line-too-long, too-many-lines

""" Test the Window management """
import asyncio

from unittest.mock import patch, call, PropertyMock
from datetime import datetime, timedelta

import logging

from homeassistant.const import STATE_ON, STATE_OFF
from homeassistant.core import HomeAssistant
from homeassistant.components.climate import (
    SERVICE_SET_TEMPERATURE,
)

from custom_components.versatile_thermostat.config_flow import (
    VersatileThermostatBaseConfigFlow,
)
from custom_components.versatile_thermostat.thermostat_climate import (
    ThermostatOverClimate,
)
from custom_components.versatile_thermostat.thermostat_switch import (
    ThermostatOverSwitch,
)

from .commons import *

logging.getLogger().setLevel(logging.DEBUG)


@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_63(
    hass: HomeAssistant,
    skip_hass_states_is_state,
    skip_turn_on_off_heater,
    skip_send_event,
):
    """Test that it should be possible to set the safety_default_on_percent to 0"""

    entry = MockConfigEntry(
        domain=DOMAIN,
        title="TheOverSwitchMockName",
        unique_id="uniqueId",
        data={
            CONF_NAME: "TheOverSwitchMockName",
            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
            CONF_CYCLE_MIN: 5,
            CONF_TEMP_MIN: 15,
            CONF_TEMP_MAX: 30,
            "eco_temp": 17,
            "comfort_temp": 18,
            "boost_temp": 19,
            CONF_USE_WINDOW_FEATURE: False,
            CONF_USE_MOTION_FEATURE: False,
            CONF_USE_POWER_FEATURE: False,
            CONF_USE_PRESENCE_FEATURE: False,
            CONF_HEATER: "switch.mock_switch",
            CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
            CONF_TPI_COEF_INT: 0.3,
            CONF_TPI_COEF_EXT: 0.01,
            CONF_MINIMAL_ACTIVATION_DELAY: 30,
            CONF_MINIMAL_DEACTIVATION_DELAY: 0,
            CONF_SAFETY_DELAY_MIN: 5,
            CONF_SAFETY_MIN_ON_PERCENT: 0.0,  # !! here
            CONF_SAFETY_DEFAULT_ON_PERCENT: 0.0,  # !! here
            CONF_DEVICE_POWER: 200,
        },
    )

    entity: BaseThermostat = await create_thermostat(
        hass, entry, "climate.theoverswitchmockname"
    )
    assert entity

    assert entity.safety_manager.safety_min_on_percent == 0
    assert entity.safety_manager.safety_default_on_percent == 0


# Waiting for answer in https://github.com/jmcollin78/versatile_thermostat/issues/64
# Repro case not evident
@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_64(
    hass: HomeAssistant,
    skip_hass_states_is_state,
    skip_turn_on_off_heater,
    skip_send_event,
):
    """Test that it should be possible to set the safety_default_on_percent to 0"""

    entry = MockConfigEntry(
        domain=DOMAIN,
        title="TheOverSwitchMockName",
        unique_id="uniqueId",
        data={
            CONF_NAME: "TheOverSwitchMockName",
            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
            CONF_CYCLE_MIN: 5,
            CONF_TEMP_MIN: 15,
            CONF_TEMP_MAX: 30,
            "eco_temp": 17,
            "comfort_temp": 18,
            "boost_temp": 19,
            CONF_USE_WINDOW_FEATURE: False,
            CONF_USE_MOTION_FEATURE: False,
            CONF_USE_POWER_FEATURE: False,
            CONF_USE_PRESENCE_FEATURE: False,
            CONF_HEATER: "switch.mock_switch",
            CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
            CONF_TPI_COEF_INT: 0.3,
            CONF_TPI_COEF_EXT: 0.01,
            CONF_MINIMAL_ACTIVATION_DELAY: 30,
            CONF_MINIMAL_DEACTIVATION_DELAY: 0,
            CONF_SAFETY_DELAY_MIN: 5,
            CONF_SAFETY_MIN_ON_PERCENT: 0.5,
            CONF_SAFETY_DEFAULT_ON_PERCENT: 0.1,  # !! here
            CONF_DEVICE_POWER: 200,
        },
    )

    entity: BaseThermostat = await create_thermostat(
        hass, entry, "climate.theoverswitchmockname"
    )
    assert entity


@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_272(
    hass: HomeAssistant,
    skip_hass_states_is_state,
    skip_turn_on_off_heater,
    skip_send_event,
):
    """Test that it not possible to set the target temperature under the min_temp setting"""

    tz = get_tz(hass)  # pylint: disable=invalid-name
    now: datetime = datetime.now(tz=tz)

    entry = MockConfigEntry(
        domain=DOMAIN,
        title="TheOverClimateMockName",
        unique_id="uniqueId",
        # default value are min 15°, max 30°, step 0.1
        data=PARTIAL_CLIMATE_CONFIG,  # 5 minutes security delay
    )

    # Min_temp is 15 and max_temp is 19
    fake_underlying_climate = MagicMockClimate()

    with patch(
        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
    ), patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingClimate.find_underlying_climate",
        return_value=fake_underlying_climate,
    ), patch(
        "homeassistant.core.ServiceRegistry.async_call"
    ) as mock_service_call:
        entity = await create_thermostat(hass, entry, "climate.theoverclimatemockname")
        assert entity

        assert entity.name == "TheOverClimateMockName"
        assert entity.is_over_climate is True
        assert entity.hvac_mode is HVACMode.OFF
        # The VTherm value and not the underlying value
        assert entity.target_temperature_step == 0.1
        assert entity.target_temperature == entity.min_temp
        assert entity.is_regulated is True

        assert mock_service_call.call_count == 0

        # Set the hvac_mode to HEAT
        await entity.async_set_hvac_mode(HVACMode.HEAT)

        # In the accepted interval
        await entity.async_set_temperature(temperature=17.5)

        # MagicMock climate is already HEAT by default. So there is no SET_HAVC_MODE call
        assert mock_service_call.call_count == 1
        mock_service_call.assert_has_calls(
            [
                # call.async_call(
                #     "climate",
                #     SERVICE_SET_HVAC_MODE,
                #     {"entity_id": "climate.mock_climate", "hvac_mode": HVACMode.HEAT},
                # ),
                call.async_call(
                    "climate",
                    SERVICE_SET_TEMPERATURE,
                    {
                        "entity_id": "climate.mock_climate",
                        "temperature": 17.5,
                        # "target_temp_high": 30,
                        # "target_temp_low": 15,
                    },
                ),
            ]
        )

    tz = get_tz(hass)  # pylint: disable=invalid-name
    event_timestamp: datetime = datetime.now(tz=tz)
    entity._set_now(now)

    with patch(
        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
    ), patch("homeassistant.core.ServiceRegistry.async_call") as mock_service_call:
        # Set room temperature to something very cold
        await send_temperature_change_event(entity, 13, now)
        await send_ext_temperature_change_event(entity, 9, now)

        event_timestamp = event_timestamp + timedelta(minutes=3)
        entity._set_now(event_timestamp)

        # Not in the accepted interval (15-19)
        await entity.async_set_temperature(temperature=10)
        assert mock_service_call.call_count == 1
        mock_service_call.assert_has_calls(
            [
                call.async_call(
                    "climate",
                    SERVICE_SET_TEMPERATURE,
                    {
                        "entity_id": "climate.mock_climate",
                        "temperature": 15,  # the minimum acceptable
                        # "target_temp_high": 30,
                        # "target_temp_low": 15,
                    },
                ),
            ]
        )

    with patch(
        "custom_components.versatile_thermostat.base_thermostat.BaseThermostat.send_event"
    ), patch("homeassistant.core.ServiceRegistry.async_call") as mock_service_call:
        # Set room temperature to something very cold
        event_timestamp = event_timestamp + timedelta(minutes=1)
        entity._set_now(event_timestamp)

        await send_temperature_change_event(entity, 13, event_timestamp)
        await send_ext_temperature_change_event(entity, 9, event_timestamp)

        # In the accepted interval
        event_timestamp = event_timestamp + timedelta(minutes=3)
        entity._set_now(event_timestamp)
        await entity.async_set_temperature(temperature=20.8)
        assert mock_service_call.call_count == 1
        mock_service_call.assert_has_calls(
            [
                call.async_call(
                    "climate",
                    SERVICE_SET_TEMPERATURE,
                    {
                        "entity_id": "climate.mock_climate",
                        "temperature": 19,  # the maximum acceptable
                        # "target_temp_high": 30,
                        # "target_temp_low": 15,
                    },
                ),
            ]
        )


@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_407(
    hass: HomeAssistant, skip_hass_states_is_state, init_central_power_manager
):
    """Test the followin case in power management:
    1. a heater is active (heating). So the power consumption takes the heater power into account. We suppose the power consumption is near the threshold,
    2. the user switch preset let's say from Comfort to Boost,
    3. expected: no shredding should occur because the heater was already active,
    4. constated: the heater goes into shredding.

    """

    temps = {
        "eco": 17,
        "comfort": 18,
        "boost": 19,
    }

    entry = MockConfigEntry(
        domain=DOMAIN,
        title="TheOverSwitchMockName",
        unique_id="uniqueId",
        data={
            CONF_NAME: "TheOverSwitchMockName",
            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
            CONF_CYCLE_MIN: 5,
            CONF_TEMP_MIN: 15,
            CONF_TEMP_MAX: 30,
            CONF_USE_WINDOW_FEATURE: False,
            CONF_USE_MOTION_FEATURE: False,
            CONF_USE_POWER_FEATURE: True,
            CONF_USE_PRESENCE_FEATURE: False,
            CONF_HEATER: "switch.mock_switch",
            CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
            CONF_TPI_COEF_INT: 0.3,
            CONF_TPI_COEF_EXT: 0.01,
            CONF_MINIMAL_ACTIVATION_DELAY: 30,
            CONF_MINIMAL_DEACTIVATION_DELAY: 0,
            CONF_SAFETY_DELAY_MIN: 5,
            CONF_SAFETY_MIN_ON_PERCENT: 0.3,
            CONF_DEVICE_POWER: 100,
            CONF_PRESET_POWER: 12,
        },
    )

    entity: ThermostatOverSwitch = await create_thermostat(
        hass, entry, "climate.theoverswitchmockname", temps
    )
    assert entity

    tpi_algo = entity._prop_algorithm
    assert tpi_algo

    now: datetime = NowClass.get_now(hass)
    VersatileThermostatAPI.get_vtherm_api()._set_now(now)

    await send_temperature_change_event(entity, 16, now)
    await send_ext_temperature_change_event(entity, 10, now)

    # 1. An already active heater will not switch to overpowering
    side_effects = SideEffects(
        {
            "sensor.the_power_sensor": State("sensor.the_power_sensor", 100),
            "sensor.the_max_power_sensor": State("sensor.the_max_power_sensor", 110),
        },
        State("unknown.entity_id", "unknown"),
    )

    with patch(
        "homeassistant.core.ServiceRegistry.async_call"
    ) as mock_service_call, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
        new_callable=PropertyMock,
        return_value=True,
    ), patch(
        "homeassistant.core.StateMachine.get",
        side_effect=side_effects.get_side_effects(),
    ):
        await entity.async_set_hvac_mode(HVACMode.HEAT)
        await entity.async_set_preset_mode(PRESET_COMFORT)
        assert entity.hvac_mode is HVACMode.HEAT
        assert entity.preset_mode is PRESET_COMFORT
        assert entity.power_manager.overpowering_state is STATE_UNKNOWN
        assert entity.target_temperature == 18
        # waits that the heater starts
        await hass.async_block_till_done()

        assert mock_service_call.call_count >= 1
        assert entity.is_device_active is True

        # Send power max mesurement
        await send_max_power_change_event(entity, 110, now)
        # Send power mesurement (theheater is already in the power measurement)
        await send_power_change_event(entity, 100, now)
        # No overpowering yet
        assert entity.power_manager.is_overpowering_detected is False
        # All configuration is complete and power is < power_max
        assert entity.preset_mode is PRESET_COMFORT
        assert entity.power_manager.overpowering_state is STATE_OFF
        assert entity.is_device_active is True

    # 2. An already active heater that switch preset will not switch to overpowering
    with patch(
        "homeassistant.core.ServiceRegistry.async_call"
    ) as mock_service_call, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
        new_callable=PropertyMock,
        return_value=True,
    ), patch(
        "homeassistant.core.StateMachine.get",
        side_effect=side_effects.get_side_effects(),
    ):
        now = now + timedelta(seconds=30)
        VersatileThermostatAPI.get_vtherm_api()._set_now(now)

        # change preset to Boost
        await entity.async_set_preset_mode(PRESET_BOOST)
        # waits that the heater starts
        await asyncio.sleep(0.1)
        # doesn't work for call_later
        # await hass.async_block_till_done()

        # simulate a refresh for central power (not necessary)
        await do_central_power_refresh(hass)

        assert entity.power_manager.is_overpowering_detected is False
        assert entity.hvac_mode is HVACMode.HEAT
        assert entity.preset_mode is PRESET_BOOST
        assert entity.power_manager.overpowering_state is STATE_OFF
        assert entity.target_temperature == 19
        assert mock_service_call.call_count >= 1

    # 3. Evenif heater is stopped (is_device_active==False) and power is over max, then overpowering should be started
    # due to check before start heating
    side_effects.add_or_update_side_effect("sensor.the_power_sensor", State("sensor.the_power_sensor", 150))
    with patch(
        "homeassistant.core.ServiceRegistry.async_call"
    ) as mock_service_call, patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingSwitch.is_device_active",
        new_callable=PropertyMock,
        return_value=False,
    ), patch(
        "homeassistant.core.StateMachine.get",
        side_effect=side_effects.get_side_effects(),
    ):
        now = now + timedelta(seconds=30)
        VersatileThermostatAPI.get_vtherm_api()._set_now(now)

        # change preset to Comfort
        await entity.async_set_preset_mode(PRESET_COMFORT)
        # waits the eventual heater starts
        await asyncio.sleep(0.1)

        # simulate a refresh for central power (not necessary because it is checked before start)
        # await do_central_power_refresh(hass)

        assert entity.power_manager.is_overpowering_detected is True
        assert entity.hvac_mode is HVACMode.HEAT
        assert entity.preset_mode is PRESET_POWER
        assert entity.power_manager.overpowering_state is STATE_ON


@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_500_1(hass: HomeAssistant, init_vtherm_api) -> None:
    """Test that the form is served with no input"""

    config = {
        CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
        CONF_USE_WINDOW_CENTRAL_CONFIG: True,
        CONF_USE_POWER_CENTRAL_CONFIG: True,
        CONF_USE_PRESENCE_CENTRAL_CONFIG: True,
        CONF_USE_MOTION_FEATURE: True,
        CONF_MOTION_SENSOR: "sensor.theMotionSensor",
    }

    flow = VersatileThermostatBaseConfigFlow(config)

    assert flow._infos[CONF_USE_WINDOW_FEATURE] is False
    assert flow._infos[CONF_USE_POWER_FEATURE] is False
    assert flow._infos[CONF_USE_PRESENCE_FEATURE] is False
    # we have a motion sensor configured
    assert flow._infos[CONF_USE_MOTION_FEATURE] is True


@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_500_2(hass: HomeAssistant, init_vtherm_api) -> None:
    """Test that the form is served with no input"""

    config = {
        CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
        CONF_USE_WINDOW_CENTRAL_CONFIG: False,
        CONF_USE_POWER_CENTRAL_CONFIG: False,
        CONF_USE_PRESENCE_CENTRAL_CONFIG: False,
        CONF_USE_MOTION_FEATURE: False,
    }

    flow = VersatileThermostatBaseConfigFlow(config)

    assert flow._infos[CONF_USE_WINDOW_FEATURE] is False
    assert flow._infos[CONF_USE_POWER_FEATURE] is False
    assert flow._infos[CONF_USE_PRESENCE_FEATURE] is False
    assert flow._infos[CONF_USE_MOTION_FEATURE] is False


@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_500_3(hass: HomeAssistant, init_vtherm_api) -> None:
    """Test that the form is served with no input"""

    config = {
        CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_SWITCH,
        CONF_USE_WINDOW_CENTRAL_CONFIG: False,
        CONF_WINDOW_SENSOR: "sensor.theWindowSensor",
        CONF_USE_POWER_CENTRAL_CONFIG: False,
        CONF_USE_PRESENCE_CENTRAL_CONFIG: False,
        CONF_PRESENCE_SENSOR: "sensor.thePresenceSensor",
        CONF_USE_MOTION_FEATURE: True,  # motion sensor need to be checked AND a motion sensor set
        CONF_MOTION_SENSOR: "sensor.theMotionSensor",
    }

    flow = VersatileThermostatBaseConfigFlow(config)

    assert flow._infos[CONF_USE_WINDOW_FEATURE] is True
    assert flow._infos[CONF_USE_POWER_FEATURE] is False
    assert flow._infos[CONF_USE_PRESENCE_FEATURE] is True
    assert flow._infos[CONF_USE_MOTION_FEATURE] is True


@pytest.mark.parametrize("expected_lingering_tasks", [True])
@pytest.mark.parametrize("expected_lingering_timers", [True])
async def test_bug_465(hass: HomeAssistant, skip_hass_states_is_state):
    """Test store and restore hvac_mode on toggle hvac state"""

    # vtherm_api: VersatileThermostatAPI = VersatileThermostatAPI.get_vtherm_api(hass)

    # The temperatures to set
    temps = {
        "frost": 7.0,
        "eco": 17.0,
        "comfort": 19.0,
        "boost": 21.0,
        "eco_ac": 27.0,
        "comfort_ac": 25.0,
        "boost_ac": 23.0,
        "frost_away": 7.1,
        "eco_away": 17.1,
        "comfort_away": 19.1,
        "boost_away": 21.1,
        "eco_ac_away": 27.1,
        "comfort_ac_away": 25.1,
        "boost_ac_away": 23.1,
    }

    # 0. initialisation

    config_entry = MockConfigEntry(
        domain=DOMAIN,
        title="TheOverClimateMockName",
        unique_id="overClimateUniqueId",
        data={
            CONF_NAME: "overClimate",
            CONF_TEMP_SENSOR: "sensor.mock_temp_sensor",
            CONF_THERMOSTAT_TYPE: CONF_THERMOSTAT_CLIMATE,
            CONF_EXTERNAL_TEMP_SENSOR: "sensor.mock_ext_temp_sensor",
            CONF_CYCLE_MIN: 5,
            CONF_TEMP_MIN: 15,
            CONF_TEMP_MAX: 30,
            CONF_USE_WINDOW_FEATURE: True,
            CONF_WINDOW_SENSOR: "binary_sensor.window_sensor",
            CONF_WINDOW_ACTION: CONF_WINDOW_TURN_OFF,
            CONF_WINDOW_DELAY: 1,
            CONF_USE_MOTION_FEATURE: False,
            CONF_USE_POWER_FEATURE: False,
            CONF_USE_PRESENCE_FEATURE: True,
            CONF_PRESENCE_SENSOR: "binary_sensor.presence_sensor",
            CONF_CLIMATE: "climate.mock_climate",
            CONF_MINIMAL_ACTIVATION_DELAY: 30,
            CONF_MINIMAL_DEACTIVATION_DELAY: 0,
            CONF_SAFETY_DELAY_MIN: 5,
            CONF_SAFETY_MIN_ON_PERCENT: 0.3,
            CONF_AUTO_FAN_MODE: CONF_AUTO_FAN_TURBO,
            CONF_AC_MODE: True,
        },
    )

    fake_underlying_climate = MockClimate(
        hass=hass,
        unique_id="mock_climate",
        name="mock_climate",
        hvac_modes=[HVACMode.OFF, HVACMode.COOL, HVACMode.HEAT, HVACMode.FAN_ONLY],
    )

    with patch(
        "custom_components.versatile_thermostat.underlyings.UnderlyingClimate.find_underlying_climate",
        return_value=fake_underlying_climate,
    ):
        vtherm: ThermostatOverClimate = await create_thermostat(
            hass, config_entry, "climate.overclimate"
        )
        assert vtherm is not None

        await set_all_climate_preset_temp(hass, vtherm, temps, "overclimate")

    now: datetime = datetime.now(tz=get_tz(hass))

    # 1. Set mode to Heat and preset to Comfort
    await send_presence_change_event(vtherm, True, False, datetime.now())
    await vtherm.async_set_hvac_mode(HVACMode.HEAT)
    await vtherm.async_set_preset_mode(PRESET_BOOST)
    await hass.async_block_till_done()

    assert vtherm.target_temperature == 21.0

    # 2. Toggle the VTherm state
    await vtherm.async_toggle()
    await hass.async_block_till_done()
    assert vtherm.hvac_mode == HVACMode.OFF

    # 3. (re)Toggle the VTherm state
    await vtherm.async_toggle()
    await hass.async_block_till_done()
    assert vtherm.hvac_mode == HVACMode.HEAT

    # 4. Toggle from COOL
    await vtherm.async_set_hvac_mode(HVACMode.COOL)
    await hass.async_block_till_done()

    assert vtherm.target_temperature == 23.0

    # 5. Toggle the VTherm state
    await vtherm.async_toggle()
    await hass.async_block_till_done()
    assert vtherm.hvac_mode == HVACMode.OFF

    # 6. (re)Toggle the VTherm state
    await vtherm.async_toggle()
    await hass.async_block_till_done()
    assert vtherm.hvac_mode == HVACMode.COOL

    ###
    # Same test with an open window and initial state is COOL
    #
    # 7. open the window
    with patch("homeassistant.helpers.condition.state", return_value=True):
        try_window_condition = await send_window_change_event(
            vtherm, True, False, now, False
        )
        await try_window_condition(None)
        await hass.async_block_till_done()

    assert vtherm.window_state is STATE_ON
    assert vtherm.hvac_mode == HVACMode.OFF

    # 8. call toggle -> we should stay in OFF (command is ignored)
    await vtherm.async_toggle()
    await hass.async_block_till_done()
    assert vtherm.hvac_mode == HVACMode.OFF

    # 9. Close the window (we should come back to Cool this time)
    now = now + timedelta(minutes=2)
    with patch("homeassistant.helpers.condition.state", return_value=True):
        try_window_condition = await send_window_change_event(
            vtherm, False, True, now, False
        )
        await try_window_condition(None)
        await hass.async_block_till_done()

    assert vtherm.window_state is STATE_OFF
    assert vtherm.hvac_mode == HVACMode.COOL

    # 9. call toggle -> we should come back in OFF
    await vtherm.async_toggle()
    await hass.async_block_till_done()
    assert vtherm.hvac_mode == HVACMode.OFF