Add message into issue template.

* Changes config_flow to allow dynamic length list of underlying entities
Updates previously defined 4x entries to new config style
Changes to thermostat_X to load underlying entities from list
Changes to thermostat X to display underlying entities as a list - COULD BREAK EXISTING TEMPLATES

* Modifies tests to use the new list format

* Added English translation for UI

* Removed all references to individual entities in strings/en.json

* Fix merge mistake

---------

Co-authored-by: Jean-Marc Collin <jm.collin.78@gmail.com>

.github/ISSUE_TEMPLATE/issue.md

@@ -4,6 +4,8 @@ about: Create a report to help us improve
 
 ---
 
+> Please read carefuly this instructions and fill this form before writing an issue. It helps me to help you.
+
 <!-- This template will allow the maintainer to be efficient and post the more accurante response as possible. There is many types / modes / configuration possible, so the analysis can be very tricky. If don't follow this template, your issue could be rejected without any message. Please help me to help you. -->
 
 <!-- Before you open a new issue, search through the existing issues to see if others have had the same problem.

README.md

@@ -1172,9 +1172,9 @@ Custom attributes are the following:
 | ``is_controlled_by_central_mode`` | True if the VTherm can be centrally controlled                                                                                   |
 | ``last_central_mode``             | The last central mode used (None if the VTherm is not centrally controlled)                                                      |
 | ``is_used_by_central_boiler``     | Indicate if the VTherm can control the central boiler                                                                            |
-| ``auto_start_stop_enable``        | Indique si le VTherm est autorisé à s'auto démarrer/arrêter                                                                      |
+| ``auto_start_stop_enable``        | Indicate if the VTherm is allowed to do auto start and stop                                                                      |
-| ``auto_start_stop_level``         | Indique le niveau d'auto start/stop                                                                                              |
+| ``auto_start_stop_level``         | Give the level of auto start/stop                                                                                                |
-| ``hvac_off_reason``               | Indique la raison de l'arrêt (hvac_off) du VTherm. Ce peut être Window, Auto-start/stop ou Manuel                                |
+| ``hvac_off_reason``               | Give the reason of stop of the VTherm. This could be Window, Auto-start/stop or Manual                                           |
 
 # Some results
 

custom_components/versatile_thermostat/__init__.py

@@ -38,6 +38,22 @@ from .const import (
     CONF_USE_CENTRAL_BOILER_FEATURE,
     CONF_POWER_SENSOR,
     CONF_PRESENCE_SENSOR,
+    CONF_UNDERLYING_LIST,
+    CONF_HEATER,
+    CONF_HEATER_2,
+    CONF_HEATER_3,
+    CONF_HEATER_4,
+    CONF_CLIMATE,
+    CONF_CLIMATE_2,
+    CONF_CLIMATE_3,
+    CONF_CLIMATE_4,
+    CONF_VALVE,
+    CONF_VALVE_2,
+    CONF_VALVE_3,
+    CONF_VALVE_4,
+    CONF_THERMOSTAT_SWITCH,
+    CONF_THERMOSTAT_CLIMATE,
+    CONF_THERMOSTAT_VALVE,
 )
 
 from .vtherm_api import VersatileThermostatAPI
@@ -208,10 +224,9 @@ async def async_migrate_entry(hass: HomeAssistant, config_entry: ConfigEntry):
         )
         new = {**config_entry.data}
 
-        if (
+        thermostat_type = config_entry.data.get(CONF_THERMOSTAT_TYPE)
-            config_entry.data.get(CONF_THERMOSTAT_TYPE)
+
-            == CONF_THERMOSTAT_CENTRAL_CONFIG
+        if thermostat_type == CONF_THERMOSTAT_CENTRAL_CONFIG:
-        ):
             new[CONF_USE_WINDOW_FEATURE] = True
             new[CONF_USE_MOTION_FEATURE] = True
             new[CONF_USE_POWER_FEATURE] = new.get(CONF_POWER_SENSOR, None) is not None
@@ -223,6 +238,50 @@ async def async_migrate_entry(hass: HomeAssistant, config_entry: ConfigEntry):
                 "add_central_boiler_control", False
             ) or new.get(CONF_USE_CENTRAL_BOILER_FEATURE, False)
 
+        if config_entry.data.get(CONF_UNDERLYING_LIST, None) is None:
+            underlying_list = []
+            if thermostat_type == CONF_THERMOSTAT_SWITCH:
+                underlying_list = [
+                    config_entry.data.get(CONF_HEATER, None),
+                    config_entry.data.get(CONF_HEATER_2, None),
+                    config_entry.data.get(CONF_HEATER_3, None),
+                    config_entry.data.get(CONF_HEATER_4, None),
+                ]
+            elif thermostat_type == CONF_THERMOSTAT_CLIMATE:
+                underlying_list = [
+                    config_entry.data.get(CONF_CLIMATE, None),
+                    config_entry.data.get(CONF_CLIMATE_2, None),
+                    config_entry.data.get(CONF_CLIMATE_3, None),
+                    config_entry.data.get(CONF_CLIMATE_4, None),
+                ]
+            elif thermostat_type == CONF_THERMOSTAT_VALVE:
+                underlying_list = [
+                    config_entry.data.get(CONF_VALVE, None),
+                    config_entry.data.get(CONF_VALVE_2, None),
+                    config_entry.data.get(CONF_VALVE_3, None),
+                    config_entry.data.get(CONF_VALVE_4, None),
+                ]
+
+            new[CONF_UNDERLYING_LIST] = [
+                entity for entity in underlying_list if entity is not None
+            ]
+
+            for key in [
+                CONF_HEATER,
+                CONF_HEATER_2,
+                CONF_HEATER_3,
+                CONF_HEATER_4,
+                CONF_CLIMATE,
+                CONF_CLIMATE_2,
+                CONF_CLIMATE_3,
+                CONF_CLIMATE_4,
+                CONF_VALVE,
+                CONF_VALVE_2,
+                CONF_VALVE_3,
+                CONF_VALVE_4,
+            ]:
+                new.pop(key, None)
+
         hass.config_entries.async_update_entry(
             config_entry,
             data=new,

custom_components/versatile_thermostat/config_flow.py

@@ -165,7 +165,7 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
 
         # check the heater_entity_id
         for conf in [
-            CONF_HEATER,
+            CONF_UNDERLYING_LIST,
             CONF_TEMP_SENSOR,
             CONF_EXTERNAL_TEMP_SENSOR,
             CONF_WINDOW_SENSOR,
@@ -173,15 +173,17 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
             CONF_POWER_SENSOR,
             CONF_MAX_POWER_SENSOR,
             CONF_PRESENCE_SENSOR,
-            CONF_CLIMATE,
         ]:
             d = data.get(conf, None)  # pylint: disable=invalid-name
-            if d is not None and self.hass.states.get(d) is None:
+            if not isinstance(d, list):
-                _LOGGER.error(
+                d = [d]
-                    "Entity id %s doesn't have any state. We cannot use it in the Versatile Thermostat configuration",  # pylint: disable=line-too-long
+            for e in d:
-                    d,
+                if e is not None and self.hass.states.get(e) is None:
-                )
+                    _LOGGER.error(
-                raise UnknownEntity(conf)
+                        "Entity id %s doesn't have any state. We cannot use it in the Versatile Thermostat configuration",  # pylint: disable=line-too-long
+                        e,
+                    )
+                    raise UnknownEntity(conf)
 
         # Check that only one window feature is used
         ws = self._infos.get(CONF_WINDOW_SENSOR)  # pylint: disable=invalid-name
@@ -270,21 +272,8 @@ class VersatileThermostatBaseConfigFlow(FlowHandler):
             ):
                 return False
 
-            if (
+            if infos.get(CONF_UNDERLYING_LIST, None) is not None and not infos.get(
-                infos.get(CONF_THERMOSTAT_TYPE) == CONF_THERMOSTAT_SWITCH
+                CONF_UNDERLYING_LIST, None
-                and infos.get(CONF_HEATER, None) is None
-            ):
-                return False
-
-            if (
-                infos.get(CONF_THERMOSTAT_TYPE) == CONF_THERMOSTAT_CLIMATE
-                and infos.get(CONF_CLIMATE, None) is None
-            ):
-                return False
-
-            if (
-                infos.get(CONF_THERMOSTAT_TYPE) == CONF_THERMOSTAT_VALVE
-                and infos.get(CONF_VALVE, None) is None
             ):
                 return False
 

custom_components/versatile_thermostat/config_schema.py

@@ -119,17 +119,10 @@ STEP_CENTRAL_BOILER_SCHEMA = vol.Schema(
 
 STEP_THERMOSTAT_SWITCH = vol.Schema(  # pylint: disable=invalid-name
     {
-        vol.Required(CONF_HEATER): selector.EntitySelector(
+        vol.Required(CONF_UNDERLYING_LIST): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=[SWITCH_DOMAIN, INPUT_BOOLEAN_DOMAIN]),
+            selector.EntitySelectorConfig(
-        ),
+                domain=[SWITCH_DOMAIN, INPUT_BOOLEAN_DOMAIN], multiple=True
-        vol.Optional(CONF_HEATER_2): selector.EntitySelector(
+            ),
-            selector.EntitySelectorConfig(domain=[SWITCH_DOMAIN, INPUT_BOOLEAN_DOMAIN]),
-        ),
-        vol.Optional(CONF_HEATER_3): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=[SWITCH_DOMAIN, INPUT_BOOLEAN_DOMAIN]),
-        ),
-        vol.Optional(CONF_HEATER_4): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=[SWITCH_DOMAIN, INPUT_BOOLEAN_DOMAIN]),
         ),
         vol.Optional(CONF_HEATER_KEEP_ALIVE): cv.positive_int,
         vol.Required(CONF_PROP_FUNCTION, default=PROPORTIONAL_FUNCTION_TPI): vol.In(
@@ -144,17 +137,8 @@ STEP_THERMOSTAT_SWITCH = vol.Schema(  # pylint: disable=invalid-name
 
 STEP_THERMOSTAT_CLIMATE = vol.Schema(  # pylint: disable=invalid-name
     {
-        vol.Required(CONF_CLIMATE): selector.EntitySelector(
+        vol.Required(CONF_UNDERLYING_LIST): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=CLIMATE_DOMAIN),
+            selector.EntitySelectorConfig(domain=CLIMATE_DOMAIN, multiple=True),
-        ),
-        vol.Optional(CONF_CLIMATE_2): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=CLIMATE_DOMAIN),
-        ),
-        vol.Optional(CONF_CLIMATE_3): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=CLIMATE_DOMAIN),
-        ),
-        vol.Optional(CONF_CLIMATE_4): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=CLIMATE_DOMAIN),
         ),
         vol.Optional(CONF_AC_MODE, default=False): cv.boolean,
         vol.Optional(
@@ -183,17 +167,10 @@ STEP_THERMOSTAT_CLIMATE = vol.Schema(  # pylint: disable=invalid-name
 
 STEP_THERMOSTAT_VALVE = vol.Schema(  # pylint: disable=invalid-name
     {
-        vol.Required(CONF_VALVE): selector.EntitySelector(
+        vol.Required(CONF_UNDERLYING_LIST): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=[NUMBER_DOMAIN, INPUT_NUMBER_DOMAIN]),
+            selector.EntitySelectorConfig(
-        ),
+                domain=[NUMBER_DOMAIN, INPUT_NUMBER_DOMAIN], multiple=True
-        vol.Optional(CONF_VALVE_2): selector.EntitySelector(
+            ),
-            selector.EntitySelectorConfig(domain=[NUMBER_DOMAIN, INPUT_NUMBER_DOMAIN]),
-        ),
-        vol.Optional(CONF_VALVE_3): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=[NUMBER_DOMAIN, INPUT_NUMBER_DOMAIN]),
-        ),
-        vol.Optional(CONF_VALVE_4): selector.EntitySelector(
-            selector.EntitySelectorConfig(domain=[NUMBER_DOMAIN, INPUT_NUMBER_DOMAIN]),
         ),
         vol.Required(CONF_PROP_FUNCTION, default=PROPORTIONAL_FUNCTION_TPI): vol.In(
             [

custom_components/versatile_thermostat/const.py

@@ -23,8 +23,8 @@ from .prop_algorithm import (
 
 _LOGGER = logging.getLogger(__name__)
 
-CONFIG_VERSION = 1
+CONFIG_VERSION = 2
-CONFIG_MINOR_VERSION = 2
+CONFIG_MINOR_VERSION = 0
 
 PRESET_TEMP_SUFFIX = "_temp"
 PRESET_AC_SUFFIX = "_ac"
@@ -55,10 +55,7 @@ PLATFORMS: list[Platform] = [
     Platform.SWITCH,
 ]
 
-CONF_HEATER = "heater_entity_id"
+CONF_UNDERLYING_LIST = "underlying_entity_ids"
-CONF_HEATER_2 = "heater_entity2_id"
-CONF_HEATER_3 = "heater_entity3_id"
-CONF_HEATER_4 = "heater_entity4_id"
 CONF_HEATER_KEEP_ALIVE = "heater_keep_alive"
 CONF_TEMP_SENSOR = "temperature_sensor_entity_id"
 CONF_LAST_SEEN_TEMP_SENSOR = "last_seen_temperature_sensor_entity_id"
@@ -90,10 +87,6 @@ CONF_THERMOSTAT_CENTRAL_CONFIG = "thermostat_central_config"
 CONF_THERMOSTAT_SWITCH = "thermostat_over_switch"
 CONF_THERMOSTAT_CLIMATE = "thermostat_over_climate"
 CONF_THERMOSTAT_VALVE = "thermostat_over_valve"
-CONF_CLIMATE = "climate_entity_id"
-CONF_CLIMATE_2 = "climate_entity2_id"
-CONF_CLIMATE_3 = "climate_entity3_id"
-CONF_CLIMATE_4 = "climate_entity4_id"
 CONF_USE_WINDOW_FEATURE = "use_window_feature"
 CONF_USE_MOTION_FEATURE = "use_motion_feature"
 CONF_USE_PRESENCE_FEATURE = "use_presence_feature"
@@ -104,10 +97,6 @@ CONF_AC_MODE = "ac_mode"
 CONF_WINDOW_AUTO_OPEN_THRESHOLD = "window_auto_open_threshold"
 CONF_WINDOW_AUTO_CLOSE_THRESHOLD = "window_auto_close_threshold"
 CONF_WINDOW_AUTO_MAX_DURATION = "window_auto_max_duration"
-CONF_VALVE = "valve_entity_id"
-CONF_VALVE_2 = "valve_entity2_id"
-CONF_VALVE_3 = "valve_entity3_id"
-CONF_VALVE_4 = "valve_entity4_id"
 CONF_AUTO_REGULATION_MODE = "auto_regulation_mode"
 CONF_AUTO_REGULATION_NONE = "auto_regulation_none"
 CONF_AUTO_REGULATION_SLOW = "auto_regulation_slow"
@@ -127,6 +116,20 @@ CONF_AUTO_FAN_HIGH = "auto_fan_high"
 CONF_AUTO_FAN_TURBO = "auto_fan_turbo"
 CONF_STEP_TEMPERATURE = "step_temperature"
 
+# Deprecated
+CONF_HEATER = "heater_entity_id"
+CONF_HEATER_2 = "heater_entity2_id"
+CONF_HEATER_3 = "heater_entity3_id"
+CONF_HEATER_4 = "heater_entity4_id"
+CONF_CLIMATE = "climate_entity_id"
+CONF_CLIMATE_2 = "climate_entity2_id"
+CONF_CLIMATE_3 = "climate_entity3_id"
+CONF_CLIMATE_4 = "climate_entity4_id"
+CONF_VALVE = "valve_entity_id"
+CONF_VALVE_2 = "valve_entity2_id"
+CONF_VALVE_3 = "valve_entity3_id"
+CONF_VALVE_4 = "valve_entity4_id"
+
 # Global params into configuration.yaml
 CONF_SHORT_EMA_PARAMS = "short_ema_params"
 CONF_SAFETY_MODE = "safety_mode"
@@ -249,10 +252,6 @@ CONF_PRESETS_AWAY_WITH_AC_VALUES = list(CONF_PRESETS_AWAY_WITH_AC.values())
 ALL_CONF = (
     [
         CONF_NAME,
-        CONF_HEATER,
-        CONF_HEATER_2,
-        CONF_HEATER_3,
-        CONF_HEATER_4,
         CONF_HEATER_KEEP_ALIVE,
         CONF_TEMP_SENSOR,
         CONF_EXTERNAL_TEMP_SENSOR,
@@ -282,20 +281,12 @@ ALL_CONF = (
         CONF_THERMOSTAT_TYPE,
         CONF_THERMOSTAT_SWITCH,
         CONF_THERMOSTAT_CLIMATE,
-        CONF_CLIMATE,
-        CONF_CLIMATE_2,
-        CONF_CLIMATE_3,
-        CONF_CLIMATE_4,
         CONF_USE_WINDOW_FEATURE,
         CONF_USE_MOTION_FEATURE,
         CONF_USE_PRESENCE_FEATURE,
         CONF_USE_POWER_FEATURE,
         CONF_USE_CENTRAL_BOILER_FEATURE,
         CONF_AC_MODE,
-        CONF_VALVE,
-        CONF_VALVE_2,
-        CONF_VALVE_3,
-        CONF_VALVE_4,
         CONF_AUTO_REGULATION_MODE,
         CONF_AUTO_REGULATION_DTEMP,
         CONF_AUTO_REGULATION_PERIOD_MIN,

custom_components/versatile_thermostat/icons.json

@@ -0,0 +1,18 @@
+{
+  "entity": {
+    "climate": {
+      "versatile_thermostat": {
+        "state_attributes": {
+          "preset_mode": {
+            "state": {
+              "shedding": "mdi:power-plug-off",
+              "safety": "mdi:shield-alert",
+              "none": "mdi:knob",
+              "frost": "mdi:snowflake"
+            }
+          }
+        }
+      }
+    }
+  }
+}

custom_components/versatile_thermostat/manifest.json

@@ -14,6 +14,6 @@
   "quality_scale": "silver",
   "requirements": [],
   "ssdp": [],
-  "version": "6.5.0",
+  "version": "6.6.0",
   "zeroconf": []
 }

custom_components/versatile_thermostat/strings.json

@@ -72,21 +72,10 @@
         "title": "Linked entities",
         "description": "Linked entities attributes",
         "data": {
-          "heater_entity_id": "1st heater switch",
+          "underlying_entity_ids": "The device(s) to be controlled",
-          "heater_entity2_id": "2nd heater switch",
-          "heater_entity3_id": "3rd heater switch",
-          "heater_entity4_id": "4th heater switch",
           "heater_keep_alive": "Switch keep-alive interval in seconds",
           "proportional_function": "Algorithm",
-          "climate_entity_id": "1st underlying climate",
-          "climate_entity2_id": "2nd underlying climate",
-          "climate_entity3_id": "3rd underlying climate",
-          "climate_entity4_id": "4th underlying climate",
           "ac_mode": "AC mode",
-          "valve_entity_id": "1st valve number",
-          "valve_entity2_id": "2nd valve number",
-          "valve_entity3_id": "3rd valve number",
-          "valve_entity4_id": "4th valve number",
           "auto_regulation_mode": "Self-regulation",
           "auto_regulation_dtemp": "Regulation threshold",
           "auto_regulation_periode_min": "Regulation minimum period",
@@ -95,21 +84,10 @@
           "auto_fan_mode": "Auto fan mode"
         },
         "data_description": {
-          "heater_entity_id": "Mandatory heater entity id",
+          "underlying_entity_ids": "The device(s) to be controlled - 1 is required",
-          "heater_entity2_id": "Optional 2nd Heater entity id. Leave empty if not required",
-          "heater_entity3_id": "Optional 3rd Heater entity id. Leave empty if not required",
-          "heater_entity4_id": "Optional 4th Heater entity id. Leave empty if not required",
           "heater_keep_alive": "Optional heater switch state refresh interval. Leave empty if not required.",
           "proportional_function": "Algorithm to use (TPI is the only one for now)",
-          "climate_entity_id": "Underlying climate entity id",
-          "climate_entity2_id": "2nd underlying climate entity id",
-          "climate_entity3_id": "3rd underlying climate entity id",
-          "climate_entity4_id": "4th underlying climate entity id",
           "ac_mode": "Use the Air Conditioning (AC) mode",
-          "valve_entity_id": "1st valve number entity id",
-          "valve_entity2_id": "2nd valve number entity id",
-          "valve_entity3_id": "3rd valve number entity id",
-          "valve_entity4_id": "4th valve number entity id",
           "auto_regulation_mode": "Auto adjustment of the target temperature",
           "auto_regulation_dtemp": "The threshold in ° (or % for valve) under which the temperature change will not be sent",
           "auto_regulation_periode_min": "Duration in minutes between two regulation update",
@@ -309,21 +287,10 @@
         "title": "Entities - {name}",
         "description": "Linked entities attributes",
         "data": {
-          "heater_entity_id": "1st heater switch",
+          "underlying_entity_ids": "The device(s) to be controlled",
-          "heater_entity2_id": "2nd heater switch",
-          "heater_entity3_id": "3rd heater switch",
-          "heater_entity4_id": "4th heater switch",
           "heater_keep_alive": "Switch keep-alive interval in seconds",
           "proportional_function": "Algorithm",
-          "climate_entity_id": "1st underlying climate",
-          "climate_entity2_id": "2nd underlying climate",
-          "climate_entity3_id": "3rd underlying climate",
-          "climate_entity4_id": "4th underlying climate",
           "ac_mode": "AC mode",
-          "valve_entity_id": "1st valve number",
-          "valve_entity2_id": "2nd valve number",
-          "valve_entity3_id": "3rd valve number",
-          "valve_entity4_id": "4th valve number",
           "auto_regulation_mode": "Self-regulation",
           "auto_regulation_dtemp": "Regulation threshold",
           "auto_regulation_periode_min": "Regulation minimum period",
@@ -332,21 +299,10 @@
           "auto_fan_mode": "Auto fan mode"
         },
         "data_description": {
-          "heater_entity_id": "Mandatory heater entity id",
+          "underlying_entity_ids": "The device(s) to be controlled - 1 is required",
-          "heater_entity2_id": "Optional 2nd Heater entity id. Leave empty if not used",
-          "heater_entity3_id": "Optional 3rd Heater entity id. Leave empty if not used",
-          "heater_entity4_id": "Optional 4th Heater entity id. Leave empty if not used",
           "heater_keep_alive": "Optional heater switch state refresh interval. Leave empty if not required.",
           "proportional_function": "Algorithm to use (TPI is the only one for now)",
-          "climate_entity_id": "Underlying climate entity id",
-          "climate_entity2_id": "2nd underlying climate entity id",
-          "climate_entity3_id": "3rd underlying climate entity id",
-          "climate_entity4_id": "4th underlying climate entity id",
           "ac_mode": "Use the Air Conditioning (AC) mode",
-          "valve_entity_id": "1st valve number entity id",
-          "valve_entity2_id": "2nd valve number entity id",
-          "valve_entity3_id": "3rd valve number entity id",
-          "valve_entity4_id": "4th valve number entity id",
           "auto_regulation_mode": "Auto adjustment of the target temperature",
           "auto_regulation_dtemp": "The threshold in ° (or % for valve) under which the temperature change will not be sent",
           "auto_regulation_periode_min": "Duration in minutes between two regulation update",
@@ -536,7 +492,8 @@
             "state": {
               "power": "Shedding",
               "security": "Safety",
-              "none": "Manual"
+              "none": "Manual",
+              "frost": "Frost"
             }
           }
         }

custom_components/versatile_thermostat/switch.py

@@ -58,7 +58,7 @@ class AutoStartStopEnable(VersatileThermostatBaseEntity, SwitchEntity, RestoreEn
     @property
     def icon(self) -> str | None:
         """The icon"""
-        return "mdi:power-settings"
+        return "mdi:power-sleep"
 
     async def async_added_to_hass(self):
         await super().async_added_to_hass()

custom_components/versatile_thermostat/thermostat_climate.py

@@ -65,10 +65,7 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
                 {
                     "is_over_climate",
                     "start_hvac_action_date",
-                    "underlying_climate_0",
+                    "underlying_entities",
-                    "underlying_climate_1",
-                    "underlying_climate_2",
-                    "underlying_climate_3",
                     "regulation_accumulated_error",
                     "auto_regulation_mode",
                     "auto_fan_mode",
@@ -100,20 +97,15 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
         """Initialize the Thermostat"""
 
         super().post_init(config_entry)
-        for climate in [
+        
-            CONF_CLIMATE,
+        for climate in config_entry.get(CONF_UNDERLYING_LIST):
-            CONF_CLIMATE_2,
+            self._underlyings.append(
-            CONF_CLIMATE_3,
+                UnderlyingClimate(
-            CONF_CLIMATE_4,
+                    hass=self._hass,
-        ]:
+                    thermostat=self,
-            if config_entry.get(climate):
+                    climate_entity_id=climate,
-                self._underlyings.append(
-                    UnderlyingClimate(
-                        hass=self._hass,
-                        thermostat=self,
-                        climate_entity_id=config_entry.get(climate),
-                    )
                 )
+            )
 
         self.choose_auto_regulation_mode(
             config_entry.get(CONF_AUTO_REGULATION_MODE)
@@ -504,18 +496,10 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
         self._attr_extra_state_attributes["start_hvac_action_date"] = (
             self._underlying_climate_start_hvac_action_date
         )
-        self._attr_extra_state_attributes["underlying_climate_0"] = self._underlyings[
+
-            0
+        self._attr_extra_state_attributes["underlying_entities"] = [
-        ].entity_id
+            underlying.entity_id for underlying in self._underlyings
-        self._attr_extra_state_attributes["underlying_climate_1"] = (
+        ]
-            self._underlyings[1].entity_id if len(self._underlyings) > 1 else None
-        )
-        self._attr_extra_state_attributes["underlying_climate_2"] = (
-            self._underlyings[2].entity_id if len(self._underlyings) > 2 else None
-        )
-        self._attr_extra_state_attributes["underlying_climate_3"] = (
-            self._underlyings[3].entity_id if len(self._underlyings) > 3 else None
-        )
 
         if self.is_regulated:
             self._attr_extra_state_attributes["is_regulated"] = self.is_regulated
@@ -910,6 +894,8 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
                     "target_temperature": self.target_temperature,
                     "current_temperature": self.current_temperature,
                     "temperature_slope": round(slope, 3),
+                    "accumulated_error": self._auto_start_stop_algo.accumulated_error,
+                    "accumulated_error_threshold": self._auto_start_stop_algo.accumulated_error_threshold,
                 },
             )
 
@@ -933,6 +919,8 @@ class ThermostatOverClimate(BaseThermostat[UnderlyingClimate]):
                     "target_temperature": self.target_temperature,
                     "current_temperature": self.current_temperature,
                     "temperature_slope": round(slope, 3),
+                    "accumulated_error": self._auto_start_stop_algo.accumulated_error,
+                    "accumulated_error_threshold": self._auto_start_stop_algo.accumulated_error_threshold,
                 },
             )
 

custom_components/versatile_thermostat/thermostat_switch.py

@@ -10,10 +10,7 @@ from homeassistant.helpers.event import (
 from homeassistant.components.climate import HVACMode
 
 from .const import (
-    CONF_HEATER,
+    CONF_UNDERLYING_LIST,
-    CONF_HEATER_2,
-    CONF_HEATER_3,
-    CONF_HEATER_4,
     CONF_HEATER_KEEP_ALIVE,
     CONF_INVERSE_SWITCH,
     overrides,
@@ -35,10 +32,7 @@ class ThermostatOverSwitch(BaseThermostat[UnderlyingSwitch]):
                 {
                     "is_over_switch",
                     "is_inversed",
-                    "underlying_switch_0",
+                    "underlying_entities",
-                    "underlying_switch_1",
-                    "underlying_switch_2",
-                    "underlying_switch_3",
                     "on_time_sec",
                     "off_time_sec",
                     "cycle_min",
@@ -90,13 +84,7 @@ class ThermostatOverSwitch(BaseThermostat[UnderlyingSwitch]):
             self.name,
         )
 
-        lst_switches = [config_entry.get(CONF_HEATER)]
+        lst_switches = config_entry.get(CONF_UNDERLYING_LIST)
-        if config_entry.get(CONF_HEATER_2):
-            lst_switches.append(config_entry.get(CONF_HEATER_2))
-        if config_entry.get(CONF_HEATER_3):
-            lst_switches.append(config_entry.get(CONF_HEATER_3))
-        if config_entry.get(CONF_HEATER_4):
-            lst_switches.append(config_entry.get(CONF_HEATER_4))
 
         delta_cycle = self._cycle_min * 60 / len(lst_switches)
         for idx, switch in enumerate(lst_switches):
@@ -140,16 +128,10 @@ class ThermostatOverSwitch(BaseThermostat[UnderlyingSwitch]):
         self._attr_extra_state_attributes["is_over_switch"] = self.is_over_switch
         self._attr_extra_state_attributes["is_inversed"] = self.is_inversed
         self._attr_extra_state_attributes["keep_alive_sec"] = under0.keep_alive_sec
-        self._attr_extra_state_attributes["underlying_switch_0"] = under0.entity_id
+
-        self._attr_extra_state_attributes["underlying_switch_1"] = (
+        self._attr_extra_state_attributes["underlying_entities"] = [
-            self._underlyings[1].entity_id if len(self._underlyings) > 1 else None
+           underlying.entity_id for underlying in self._underlyings
-        )
+        ]
-        self._attr_extra_state_attributes["underlying_switch_2"] = (
-            self._underlyings[2].entity_id if len(self._underlyings) > 2 else None
-        )
-        self._attr_extra_state_attributes["underlying_switch_3"] = (
-            self._underlyings[3].entity_id if len(self._underlyings) > 3 else None
-        )
 
         self._attr_extra_state_attributes[
             "on_percent"

custom_components/versatile_thermostat/thermostat_valve.py

@@ -15,10 +15,7 @@ from .base_thermostat import BaseThermostat, ConfigData
 from .prop_algorithm import PropAlgorithm
 
 from .const import (
-    CONF_VALVE,
+    CONF_UNDERLYING_LIST,
-    CONF_VALVE_2,
-    CONF_VALVE_3,
-    CONF_VALVE_4,
     # This is not really self-regulation but regulation here
     CONF_AUTO_REGULATION_DTEMP,
     CONF_AUTO_REGULATION_PERIOD_MIN,
@@ -37,10 +34,7 @@ class ThermostatOverValve(BaseThermostat[UnderlyingValve]):  # pylint: disable=a
         frozenset(
             {
                 "is_over_valve",
-                "underlying_valve_0",
+                "underlying_entities",
-                "underlying_valve_1",
-                "underlying_valve_2",
-                "underlying_valve_3",
                 "on_time_sec",
                 "off_time_sec",
                 "cycle_min",
@@ -105,13 +99,7 @@ class ThermostatOverValve(BaseThermostat[UnderlyingValve]):  # pylint: disable=a
             self.name,
         )
 
-        lst_valves = [config_entry.get(CONF_VALVE)]
+        lst_valves = config_entry.get(CONF_UNDERLYING_LIST)
-        if config_entry.get(CONF_VALVE_2):
-            lst_valves.append(config_entry.get(CONF_VALVE_2))
-        if config_entry.get(CONF_VALVE_3):
-            lst_valves.append(config_entry.get(CONF_VALVE_3))
-        if config_entry.get(CONF_VALVE_4):
-            lst_valves.append(config_entry.get(CONF_VALVE_4))
 
         for _, valve in enumerate(lst_valves):
             self._underlyings.append(
@@ -163,18 +151,10 @@ class ThermostatOverValve(BaseThermostat[UnderlyingValve]):  # pylint: disable=a
             "valve_open_percent"
         ] = self.valve_open_percent
         self._attr_extra_state_attributes["is_over_valve"] = self.is_over_valve
-        self._attr_extra_state_attributes["underlying_valve_0"] = self._underlyings[
+
-            0
+        self._attr_extra_state_attributes["underlying_entities"] = [
-        ].entity_id
+           underlying.entity_id for underlying in self._underlyings
-        self._attr_extra_state_attributes["underlying_valve_1"] = (
+        ]
-            self._underlyings[1].entity_id if len(self._underlyings) > 1 else None
-        )
-        self._attr_extra_state_attributes["underlying_valve_2"] = (
-            self._underlyings[2].entity_id if len(self._underlyings) > 2 else None
-        )
-        self._attr_extra_state_attributes["underlying_valve_3"] = (
-            self._underlyings[3].entity_id if len(self._underlyings) > 3 else None
-        )
 
         self._attr_extra_state_attributes[
             "on_percent"

custom_components/versatile_thermostat/translations/en.json

@@ -72,21 +72,10 @@
         "title": "Linked entities",
         "description": "Linked entities attributes",
         "data": {
-          "heater_entity_id": "1st heater switch",
+          "underlying_entity_ids": "The device(s) to be controlled",
-          "heater_entity2_id": "2nd heater switch",
-          "heater_entity3_id": "3rd heater switch",
-          "heater_entity4_id": "4th heater switch",
           "heater_keep_alive": "Switch keep-alive interval in seconds",
           "proportional_function": "Algorithm",
-          "climate_entity_id": "1st underlying climate",
-          "climate_entity2_id": "2nd underlying climate",
-          "climate_entity3_id": "3rd underlying climate",
-          "climate_entity4_id": "4th underlying climate",
           "ac_mode": "AC mode",
-          "valve_entity_id": "1st valve number",
-          "valve_entity2_id": "2nd valve number",
-          "valve_entity3_id": "3rd valve number",
-          "valve_entity4_id": "4th valve number",
           "auto_regulation_mode": "Self-regulation",
           "auto_regulation_dtemp": "Regulation threshold",
           "auto_regulation_periode_min": "Regulation minimum period",
@@ -95,21 +84,10 @@
           "auto_fan_mode": "Auto fan mode"
         },
         "data_description": {
-          "heater_entity_id": "Mandatory heater entity id",
+          "underlying_entity_ids": "The device(s) to be controlled - 1 is required",
-          "heater_entity2_id": "Optional 2nd Heater entity id. Leave empty if not required",
-          "heater_entity3_id": "Optional 3rd Heater entity id. Leave empty if not required",
-          "heater_entity4_id": "Optional 4th Heater entity id. Leave empty if not required",
           "heater_keep_alive": "Optional heater switch state refresh interval. Leave empty if not required.",
           "proportional_function": "Algorithm to use (TPI is the only one for now)",
-          "climate_entity_id": "Underlying climate entity id",
-          "climate_entity2_id": "2nd underlying climate entity id",
-          "climate_entity3_id": "3rd underlying climate entity id",
-          "climate_entity4_id": "4th underlying climate entity id",
           "ac_mode": "Use the Air Conditioning (AC) mode",
-          "valve_entity_id": "1st valve number entity id",
-          "valve_entity2_id": "2nd valve number entity id",
-          "valve_entity3_id": "3rd valve number entity id",
-          "valve_entity4_id": "4th valve number entity id",
           "auto_regulation_mode": "Auto adjustment of the target temperature",
           "auto_regulation_dtemp": "The threshold in ° (or % for valve) under which the temperature change will not be sent",
           "auto_regulation_periode_min": "Duration in minutes between two regulation update",
@@ -309,21 +287,10 @@
         "title": "Entities - {name}",
         "description": "Linked entities attributes",
         "data": {
-          "heater_entity_id": "1st heater switch",
+          "underlying_entity_ids": "The device(s) to be controlled",
-          "heater_entity2_id": "2nd heater switch",
-          "heater_entity3_id": "3rd heater switch",
-          "heater_entity4_id": "4th heater switch",
           "heater_keep_alive": "Switch keep-alive interval in seconds",
           "proportional_function": "Algorithm",
-          "climate_entity_id": "1st underlying climate",
-          "climate_entity2_id": "2nd underlying climate",
-          "climate_entity3_id": "3rd underlying climate",
-          "climate_entity4_id": "4th underlying climate",
           "ac_mode": "AC mode",
-          "valve_entity_id": "1st valve number",
-          "valve_entity2_id": "2nd valve number",
-          "valve_entity3_id": "3rd valve number",
-          "valve_entity4_id": "4th valve number",
           "auto_regulation_mode": "Self-regulation",
           "auto_regulation_dtemp": "Regulation threshold",
           "auto_regulation_periode_min": "Regulation minimum period",
@@ -332,21 +299,10 @@
           "auto_fan_mode": "Auto fan mode"
         },
         "data_description": {
-          "heater_entity_id": "Mandatory heater entity id",
+          "underlying_entity_ids": "The device(s) to be controlled - 1 is required",
-          "heater_entity2_id": "Optional 2nd Heater entity id. Leave empty if not used",
-          "heater_entity3_id": "Optional 3rd Heater entity id. Leave empty if not used",
-          "heater_entity4_id": "Optional 4th Heater entity id. Leave empty if not used",
           "heater_keep_alive": "Optional heater switch state refresh interval. Leave empty if not required.",
           "proportional_function": "Algorithm to use (TPI is the only one for now)",
-          "climate_entity_id": "Underlying climate entity id",
-          "climate_entity2_id": "2nd underlying climate entity id",
-          "climate_entity3_id": "3rd underlying climate entity id",
-          "climate_entity4_id": "4th underlying climate entity id",
           "ac_mode": "Use the Air Conditioning (AC) mode",
-          "valve_entity_id": "1st valve number entity id",
-          "valve_entity2_id": "2nd valve number entity id",
-          "valve_entity3_id": "3rd valve number entity id",
-          "valve_entity4_id": "4th valve number entity id",
           "auto_regulation_mode": "Auto adjustment of the target temperature",
           "auto_regulation_dtemp": "The threshold in ° (or % for valve) under which the temperature change will not be sent",
           "auto_regulation_periode_min": "Duration in minutes between two regulation update",
@@ -536,7 +492,8 @@
             "state": {
               "power": "Shedding",
               "security": "Safety",
-              "none": "Manual"
+              "none": "Manual",
+              "frost": "Frost"
             }
           }
         }

custom_components/versatile_thermostat/translations/fr.json

@@ -554,7 +554,8 @@
             "state": {
               "power": "Délestage",
               "security": "Sécurité",
-              "none": "Manuel"
+              "none": "Manuel",
+              "frost": "Hors Gel"
             }
           }
         }

custom_components/versatile_thermostat/translations/it.json

@@ -364,7 +364,8 @@
             "state": {
               "power": "Ripartizione",
               "security": "Sicurezza",
-              "none": "Manuale"
+              "none": "Manuale",
+              "frost": "Gelo"
             }
           }
         }

tests/const.py

@@ -74,7 +74,7 @@ MOCK_TH_OVER_SWITCH_CENTRAL_MAIN_CONFIG = {
 }
 
 MOCK_TH_OVER_SWITCH_TYPE_CONFIG = {
-    CONF_HEATER: "switch.mock_switch",
+    CONF_UNDERLYING_LIST: ["switch.mock_switch"],
     CONF_HEATER_KEEP_ALIVE: 0,
     CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
     CONF_AC_MODE: False,
@@ -82,17 +82,14 @@ MOCK_TH_OVER_SWITCH_TYPE_CONFIG = {
 }
 
 MOCK_TH_OVER_SWITCH_AC_TYPE_CONFIG = {
-    CONF_HEATER: "switch.mock_air_conditioner",
+    CONF_UNDERLYING_LIST: ["switch.mock_air_conditioner"],
     CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
     CONF_AC_MODE: True,
     CONF_INVERSE_SWITCH: False,
 }
 
 MOCK_TH_OVER_4SWITCH_TYPE_CONFIG = {
-    CONF_HEATER: "switch.mock_4switch0",
+    CONF_UNDERLYING_LIST: ["switch.mock_4switch0", "switch.mock_4switch1","switch.mock_4switch2","switch.mock_4switch3"],
-    CONF_HEATER_2: "switch.mock_4switch1",
-    CONF_HEATER_3: "switch.mock_4switch2",
-    CONF_HEATER_4: "switch.mock_4switch3",
     CONF_HEATER_KEEP_ALIVE: 0,
     CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
     CONF_AC_MODE: False,
@@ -105,7 +102,7 @@ MOCK_TH_OVER_SWITCH_TPI_CONFIG = {
 }
 
 MOCK_TH_OVER_CLIMATE_TYPE_CONFIG = {
-    CONF_CLIMATE: "climate.mock_climate",
+    CONF_UNDERLYING_LIST: ["climate.mock_climate"],
     CONF_AC_MODE: False,
     CONF_AUTO_REGULATION_MODE: CONF_AUTO_REGULATION_STRONG,
     CONF_AUTO_REGULATION_DTEMP: 0.5,
@@ -115,7 +112,7 @@ MOCK_TH_OVER_CLIMATE_TYPE_CONFIG = {
 }
 
 MOCK_TH_OVER_CLIMATE_TYPE_USE_DEVICE_TEMP_CONFIG = {
-    CONF_CLIMATE: "climate.mock_climate",
+    CONF_UNDERLYING_LIST: ["climate.mock_climate"],
     CONF_AC_MODE: False,
     CONF_AUTO_REGULATION_MODE: CONF_AUTO_REGULATION_STRONG,
     CONF_AUTO_REGULATION_DTEMP: 0.1,
@@ -125,13 +122,13 @@ MOCK_TH_OVER_CLIMATE_TYPE_USE_DEVICE_TEMP_CONFIG = {
 }
 
 MOCK_TH_OVER_CLIMATE_TYPE_NOT_REGULATED_CONFIG = {
-    CONF_CLIMATE: "climate.mock_climate",
+    CONF_UNDERLYING_LIST: ["climate.mock_climate"],
     CONF_AC_MODE: False,
     CONF_AUTO_REGULATION_MODE: CONF_AUTO_REGULATION_NONE,
 }
 
 MOCK_TH_OVER_CLIMATE_TYPE_AC_CONFIG = {
-    CONF_CLIMATE: "climate.mock_climate",
+    CONF_UNDERLYING_LIST: ["climate.mock_climate"],
     CONF_AC_MODE: True,
     CONF_AUTO_REGULATION_MODE: CONF_AUTO_REGULATION_STRONG,
     CONF_AUTO_REGULATION_DTEMP: 0.5,

tests/test_auto_start_stop.py

@@ -444,6 +444,8 @@ async def test_auto_start_stop_medium_heat_vtherm(
                         "target_temperature": 19.0,
                         "current_temperature": 21.0,
                         "temperature_slope": 0.167,
+                        "accumulated_error": -5,
+                        "accumulated_error_threshold": 5,
                     },
                 )
             ]
@@ -507,6 +509,8 @@ async def test_auto_start_stop_medium_heat_vtherm(
                         "target_temperature": 19.0,
                         "current_temperature": 18.0,
                         "temperature_slope": -0.034,
+                        "accumulated_error": 5,
+                        "accumulated_error_threshold": 5,
                     },
                 )
             ]
@@ -569,7 +573,7 @@ async def test_auto_start_stop_fast_ac_vtherm(
             CONF_USE_AUTO_START_STOP_FEATURE: True,
             CONF_USE_PRESENCE_FEATURE: True,
             CONF_PRESENCE_SENSOR: "binary_sensor.presence_sensor",
-            CONF_CLIMATE: "climate.mock_climate",
+            CONF_UNDERLYING_LIST: ["climate.mock_climate"],
             CONF_MINIMAL_ACTIVATION_DELAY: 30,
             CONF_SECURITY_DELAY_MIN: 5,
             CONF_SECURITY_MIN_ON_PERCENT: 0.3,
@@ -672,6 +676,8 @@ async def test_auto_start_stop_fast_ac_vtherm(
                         "target_temperature": 25.0,
                         "current_temperature": 23.0,
                         "temperature_slope": -0.28,
+                        "accumulated_error": 2,
+                        "accumulated_error_threshold": 2,
                     },
                 )
             ]
@@ -734,6 +740,8 @@ async def test_auto_start_stop_fast_ac_vtherm(
                         "target_temperature": 25.0,
                         "current_temperature": 26.5,
                         "temperature_slope": 0.112,
+                        "accumulated_error": -2,
+                        "accumulated_error_threshold": 2,
                     },
                 )
             ]
@@ -881,6 +889,8 @@ async def test_auto_start_stop_medium_heat_vtherm_preset_change(
                         "target_temperature": 17.0,
                         "current_temperature": 19.0,
                         "temperature_slope": 0.3,
+                        "accumulated_error": -2,
+                        "accumulated_error_threshold": 2,
                     },
                 )
             ]
@@ -936,6 +946,8 @@ async def test_auto_start_stop_medium_heat_vtherm_preset_change(
                         "target_temperature": 21.0,
                         "current_temperature": 17.0,
                         "temperature_slope": -0.087,
+                        "accumulated_error": 2,
+                        "accumulated_error_threshold": 2,
                     },
                 )
             ]
@@ -1445,6 +1457,8 @@ async def test_auto_start_stop_fast_heat_window_mixed(
                         "target_temperature": 19.0,
                         "current_temperature": 21.0,
                         "temperature_slope": 0.214,
+                        "accumulated_error": -2,
+                        "accumulated_error_threshold": 2,
                     },
                 ),
             ]

tests/test_config_flow.py

@@ -87,7 +87,7 @@ async def test_user_config_flow_over_switch(
     result = await hass.config_entries.flow.async_configure(
         result["flow_id"],
         user_input={
-            CONF_HEATER: "switch.mock_switch",
+            CONF_UNDERLYING_LIST: ["switch.mock_switch"],
             CONF_HEATER_KEEP_ALIVE: 0,
             CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
             CONF_AC_MODE: False,
@@ -292,7 +292,7 @@ async def test_user_config_flow_over_switch(
     )
     assert result["result"]
     assert result["result"].domain == DOMAIN
-    assert result["result"].version == 1
+    assert result["result"].version == 2
     assert result["result"].title == "TheOverSwitchMockName"
     assert isinstance(result["result"], ConfigEntry)
 
@@ -379,7 +379,7 @@ async def test_user_config_flow_over_climate(
     result = await hass.config_entries.flow.async_configure(
         result["flow_id"],
         user_input={
-            CONF_CLIMATE: "climate.mock_climate",
+            CONF_UNDERLYING_LIST: ["climate.mock_climate"],
             CONF_AC_MODE: False,
             CONF_AUTO_REGULATION_MODE: CONF_AUTO_REGULATION_STRONG,
             CONF_AUTO_REGULATION_DTEMP: 0.5,
@@ -512,7 +512,7 @@ async def test_user_config_flow_over_climate(
     }
     assert result["result"]
     assert result["result"].domain == DOMAIN
-    assert result["result"].version == 1
+    assert result["result"].version == 2
     assert result["result"].title == "TheOverClimateMockName"
     assert isinstance(result["result"], ConfigEntry)
 
@@ -794,10 +794,7 @@ async def test_user_config_flow_over_4_switches(
     }
 
     TYPE_CONFIG = {  # pylint: disable=invalid-name
-        CONF_HEATER: "switch.mock_switch1",
+        CONF_UNDERLYING_LIST: ["switch.mock_switch1", "switch.mock_switch2", "switch.mock_switch3","switch.mock_switch4"],
-        CONF_HEATER_2: "switch.mock_switch2",
-        CONF_HEATER_3: "switch.mock_switch3",
-        CONF_HEATER_4: "switch.mock_switch4",
         CONF_HEATER_KEEP_ALIVE: 0,
         CONF_PROP_FUNCTION: PROPORTIONAL_FUNCTION_TPI,
         CONF_AC_MODE: False,
@@ -1015,7 +1012,7 @@ async def test_user_config_flow_over_climate_auto_start_stop(
     result = await hass.config_entries.flow.async_configure(
         result["flow_id"],
         user_input={
-            CONF_CLIMATE: "climate.mock_climate",
+            CONF_UNDERLYING_LIST: ["climate.mock_climate"],
             CONF_AC_MODE: False,
             CONF_AUTO_REGULATION_MODE: CONF_AUTO_REGULATION_STRONG,
             CONF_AUTO_REGULATION_DTEMP: 0.5,
@@ -1124,6 +1121,6 @@ async def test_user_config_flow_over_climate_auto_start_stop(
     }
     assert result["result"]
     assert result["result"].domain == DOMAIN
-    assert result["result"].version == 1
+    assert result["result"].version == 2
     assert result["result"].title == "TheOverClimateMockName"
     assert isinstance(result["result"], ConfigEntry)