Froeling Lambdatronic Modbus

Home Assistant integration for Fröling Lambdatronic heating systems via Modbus (currently supports Modbus TCP only).

⚠️ Disclaimer ⚠️

This integration is experimental and has not been tested over long periods.
It may contain missing or incorrect sensor data.
Feel free to open an issue or contribute via a pull request.

🚀 Features

With this integration, you can:

Read real-time sensor data from your Fröling heating system.
Monitor boiler performance and operational parameters.
Configure heating system settings directly from Home Assistant.

💻 Requirements

To communicate with the heating system, you need a Modbus-to-TCP device.
This integration has been tested with the Waveshare RS232/RS485 to Ethernet Converter, but other Serial-to-Ethernet adapters should work.

🔧 Enabling Modbus RTU on the Boiler

To enable Modbus RTU on your Fröling boiler:

Navigate to Boiler Settings.
Click the user icon and enter code -7.
Adjust the following settings:
- Settings > General Settings > MODBUS Settings > Modbus Protokoll RTU → Set to 1
- Settings > General Settings > MODBUS Settings > Use Modbus Protokoll 2014 → Yes
- Settings > General Settings > MODBUS Settings > Use COM2 as MODBUS Interface → Yes

🛠️ Hardware Setup

I used a Waveshare RS232/RS485 to Ethernet Converter and connected RS232 to COM2 on the boiler.

Other Serial-to-Ethernet converters should work as well.

📦 Installation

Copy the integration files into your Home Assistant custom_components folder.
Restart Home Assistant.
Add the integration via the Home Assistant UI.

🧡 Contributing

Contributions are welcome!

Fork this repository.
Make changes within your fork.
Create a pull request.

I’ll do my best to review and merge contributions.

2.3 KiB Raw Blame History Unescape Escape