asusctl/CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

[Unreleased]

Changed

• Set PM to auto for Nvidia always
• Extra info output for gfx dev scan
• Extra info in log for G-Sync to help prevent user confusion around gfx switching
• Add GA503Q led modes
• Added ability to fade in/out gifs and images for anime. This does break anime configs. See manual for details.
• Added task to CtrlLed to set the keyboard LED brightness on wake from suspend
  • requires a kernel patch which will be upstreamed and in fedora rog kernel
• Make gfx change from nvidia to vfio/compute also force-change to integrated then to requested mode

[3.6.1] - 2021-05-25

Changed

• Bugfix: write correct fan modes for profiles
• Bugfix: apply created profiles

[3.6.1] - 2021-05-25

Changed

• Bugfix for cycling through profiles

[3.6.0] - 2021-05-24

Changed

• Add GX550L led modes
• Don't save compute/vfio modes. Option in config for this is removed.
• Store a temporary non-serialised option in config for if compute/vfio is active for informational purposes only (will not apply on boot)
• Save state for LEDs enabled + sleep animation enabled
• Save state for AnimMe enabled + boot animation enabled
• Add extra config options and dbus methods
• Add power state signals for anime and led
• Refactor to use channels for dbus signal handler send/recv
• Split out profiles independant parts to a rog-profiles crate
• Cleanup dependencies
• Fix some dbus Supported issues

[3.5.2] - 2021-05-15

Changed

• Bugfix: prevent the hang on compute/integrated mode change

[3.5.1] - 2021-04-25

Changed

• Anime:
  • Fix using multiple configs

[3.5.0] - 2021-04-25

Changed

• Keyboard:
  • Split out all aura functionality that isn't dependent on the daemon in to a new crate rog-aura (incomplete)
  • Keyboard LED control now includes:
    • Enable/disable LED's while laptop is awake
    • Enable/disable LED animation while laptop is suspended and AC plugged in
  • Properly reload the last used keyboard mode on boot
• Graphics:
  • Correctly enable compute mode for nvidia plus no-reboot or logout if switching from vfio/integrated/compute.
  • Add asusd config option to not save compute/vfio mode switch.
• Anime:
  • Enable basic multiple user anime configs (asusd-user must still be restarted)
• Profiles:
  • Enable dbus methods for freq min/max, fan curve, fan preset, CPU turbo enable. These options will apply to the active profile if no profile name is specified.

[3.4.1] - 2021-04-11

Changed

• Fix anime init sequence

[3.4.0] - 2021-04-11

Changed

• Revert zbus to 1.9.1
• Use enum to show power states, and catch missing pci path for nvidia.
• Partial user-daemon for anime/per-key done, asusd-user. Includes asusd-user systemd unit.
• user-daemon provides dbus emthods to insert anime actions, remove from index, set leds on/off
  • Config file is stored in ~/.config/rog/rog-user.cfg
• AniMe display parts split out to individual crate in preparation for publishing on crates.io

[3.3.0] - 2021-04-3

Changed

• Add ledmodes for G733QS
• Add ledmodes for GA401Q
• Default to vfio disabled in configuration. Will now hard-error if enabled and the kernel modules are builtin. To enable vfio switching "gfx_vfio_enable": false, must be changed to true in /etc/asusd/asusd.conf

[3.2.4] - 2021-03-24

Changed

• Ignore vfio-builtin error if switching to integrated

[3.2.3] - 2021-03-24

Changed

• Better handling of session tracking

Added

• List all profile data
• Get active profile name
• Get active profile data

[3.2.2] - 2021-03-23

Changed

• Fix brightness control, again, for non-RGB keyboards

[3.2.1] - 2021-03-21

Changed

• Fix brightness control
• Large cleanup of code relating to LED controls

[3.2.0] - 2021-03-21

Changed

• Refactor keyboard LED handling
• Added --list for profiles (Thanks @aqez)
• Added --remove for profiles (Thanks @aqez)
• Added a graphics mode: vfio. This attaches Nvidia devices to vfio module.

Broken

• Per-key LED modes, which need thinking about how to go ahead with for future

[3.1.7] - 2021-03-11

Changed

• Refactor many parts of daemon
• Switch out session monitoring to logind-zbus

[3.1.6] - 2021-03-11

Changed

• Graphics switching will now wait until all users logged out before switching

Changed

• Further tweaks to gfx switching
• More logging on gfx switching
• Filter bios help according to supported modes
• Prevent gfx mode switching if in dedicated/G-Sync mode

[3.1.4] - 2021-03-10

Changed

• Notify through dbus if user changes profile manually
• Better help on CLI, show help only for supported items
• Bugfix to gfx switcher

[3.1.3] - 2021-03-10

Changed

• Hotfix: gracefully handle removing modules in use caused by display-manager not fully shutdown at the time of trying to remove modules. It will now retry every 250ms per module

[3.1.2] - 2021-03-10

Changed

• Test and create /etc/X11/xorg.conf.d/ if it doesn't exist
• Hotfix to better report module issues

[3.1.1] - 2021-03-10

Changed

• Add missing nvidia module nvidia_uvm to gfx ctrl list

[3.1.0] - 2021-03-09

Added

• GU502LU led-modes

Changed

• Graphics switching is now rebootless, the daemon will now restart the display-manager to switch modes instead. Caveats are:
  • There is no confirmation from the daemon, the program issuing the command must confirm the request.
  • systemd only
• Laptops with dedicated Nvidia mode:
  • You still must reboot for the bios to switch modes
  • On boot if dedicated mode is active then asusd will update the required configs to put display-manager in nvidia mode

[3.0.0] - 2021-02-22

Added

• G531GD led modes

[3.0.0] - 2021-02-14

Changed

• Write set+apply after each array in multizone
• Remove misc bad logic
• Use same code path as 0x1866 device to configure led support for 0x1854 device
• Remove duplicate code
• Set correct speeds for multizone
• Remove dbus crate in favour of zbus. This removes the external dbus lib requirement.
• Huge internal refactor
• BREAKING CHANGE: Anime code refactor. DBUS method names have changed
• Cleanup fan and cpu control + configs

[2.2.2] - 2021-01-31

Changed

• Fix for dedicated gfx capable laptops in integrated mode
• Fix for 0x1854 device

[2.2.1] - 2021-01-27

Added

• Add ROG Zephyrus M15 LED config

Changed

• Bugfixes
• Fix reboot/restartx status for GFX switching
• Update readme
• Change CLI arg tag for fan modes
• Make dracut include the nvidia modules in initramfs

[2.2.0] - 2021-01-26

Added

• Dbus command to fetch all supported functions of the laptop. That is, all the functions that asusd supports for the currently running laptop.
• Bios setting toggles for:
  • Dedicated gfx toggle (support depends on the laptop)
  • Bios boot POST sound toggle

Changed

• added config option for dedicated gfx mode on laptops with it to enable switching directly to dedicated using asusctl graphics -m nvidia

[2.1.2] - 2021-01-10

Changed

• Adjust gfx controller to assume that the graphics driver is loaded if the mode is set for nvidia/hybrid

[2.1.1] - 2021-01-09

Changed

• Updates to dependencies

[2.1.0] - 2020-10-25

Added

• Option to turn off AniMe display (@asere)

Changed

• Change option -k to show current LED bright (@asere)
• Correctly disable GFX control via config
• Panic and exit if config can't be parsed
• Add DBUS method to toggle to next fan/thermal profile
• Add DBUS method to toggle to next/prev Aura mode

[2.0.5] - 2020-09-29

Changed

• Bugfixes

[2.0.4] - 2020-09-24

Changed

• Better and more verbose error handling and logging in many places.
• Fix timeout for client waiting on reply for graphics switching

[2.0.2] - 2020-09-21

Changed

• graphics options via CLI are now a command block:
  • asusctl graphics
  • -m Mode <nvidia, hybrid, compute, integrated>
  • -g Get current mode
  • -f Force reboot or restart display manager without confirmation

[2.0.0] - 2020-09-21

Changed

• Code refactor to spawn less tasks. Main loop will run only as fast as it receives events
• No-longer using tokio or async, reducing resource use

Added

• A basic user daemon has been added for user notifications over dbus (XDG spec)
• Added a user systemd service for notifications (asus-notify)
• Graphics mode handling <iGPU only, dGPU only, or hybrid>, see asusctl --help

BREAKING CHANGES

• asusd.conf has changed slightly and will overwrite old configs
• All DBUS methods/signals/paths etc, are all updated and changed

[1.1.2] - 2020-09-10

Changed

• Bump rog-fan-curve to new versiont o support GA401IV

[1.1.1] - 2020-09-10

Changed

• Correction to AMD turbo setting

[1.1.0] - 2020-09-10

Changed

• Uses string instead of debug print for some errors
• Add interface num arg for LED controller (should help support older laptops better)
• Some slightly better error messages
• Fix an idiotic mistake in for i in 0..2.. if i > 0 -_-
• Remove "unsupported" warning on laptop ctrl
• Silence warning about AniMe not existing
• Adjust the turbo-toggle CLI arg
• Version bump for new release with fancurves

[1.0.2] - 2020-08-13

Changed

• Bugfixes to led brightness watcher
• Bufixes to await/async tasks

[1.0.1] - 2020-08-13

• Fix small deadlock with awaits

[1.0.0] - 2020-08-13

• Major fork and refactor to use asus-hid patch for ASUS N-Key device