asusctl/bindings/dbus-xml/org-asuslinux-platform-4.xml

<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN"
 "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
<node>
  <interface name="org.freedesktop.DBus.Introspectable">
    <method name="Introspect">
      <arg type="s" direction="out"/>
    </method>
  </interface>
  <interface name="org.freedesktop.DBus.Properties">
    <method name="Get">
      <arg name="interface_name" type="s" direction="in"/>
      <arg name="property_name" type="s" direction="in"/>
      <arg type="v" direction="out"/>
    </method>
    <method name="Set">
      <arg name="interface_name" type="s" direction="in"/>
      <arg name="property_name" type="s" direction="in"/>
      <arg name="value" type="v" direction="in"/>
    </method>
    <method name="GetAll">
      <arg name="interface_name" type="s" direction="in"/>
      <arg type="a{sv}" direction="out"/>
    </method>
    <!--
     Emits the `org.freedesktop.DBus.Properties.PropertiesChanged` signal.
     -->
    <signal name="PropertiesChanged">
      <arg name="interface_name" type="s"/>
      <arg name="changed_properties" type="a{sv}"/>
      <arg name="invalidated_properties" type="as"/>
    </signal>
  </interface>
  <interface name="org.asuslinux.FanCurves">
    <!--
     Set all fan curves for a profile to enabled status. Will also activate a
     fan curve if in the same profile mode
     -->
    <method name="SetFanCurvesEnabled">
      <arg name="profile" type="u" direction="in"/>
      <arg name="enabled" type="b" direction="in"/>
    </method>
    <!--
     Set a single fan curve for a profile to enabled status. Will also
     activate a fan curve if in the same profile mode
     -->
    <method name="SetProfileFanCurveEnabled">
      <arg name="profile" type="u" direction="in"/>
      <arg name="fan" type="s" direction="in"/>
      <arg name="enabled" type="b" direction="in"/>
    </method>
    <!--
     Get the fan-curve data for the currently active ThrottlePolicy
     -->
    <method name="FanCurveData">
      <arg name="profile" type="u" direction="in"/>
      <arg type="a(s(yyyyyyyy)(yyyyyyyy)b)" direction="out"/>
    </method>
    <!--
     Set the fan curve for the specified profile.
     Will also activate the fan curve if the user is in the same mode.
     -->
    <method name="SetFanCurve">
      <arg name="profile" type="u" direction="in"/>
      <arg name="curve" type="(s(yyyyyyyy)(yyyyyyyy)b)" direction="in"/>
    </method>
    <!--
     Reset the stored (self) and device curves to the defaults of the
     platform.

     Each platform_profile has a different default and the default can be
     read only for the currently active profile.
     -->
    <method name="SetCurvesToDefaults">
      <arg name="profile" type="u" direction="in"/>
    </method>
    <!--
     Reset the stored (self) and device curve to the defaults of the
     platform.

     Each platform_profile has a different default and the defualt can be
     read only for the currently active profile.
     -->
    <method name="ResetProfileCurves">
      <arg name="profile" type="u" direction="in"/>
    </method>
  </interface>
  <interface name="org.freedesktop.DBus.Peer">
    <method name="Ping">
    </method>
    <method name="GetMachineId">
      <arg type="s" direction="out"/>
    </method>
  </interface>
  <interface name="org.asuslinux.Platform">
    <method name="Version">
      <arg type="s" direction="out"/>
    </method>
    <!--
     Returns a list of property names that this system supports
     -->
    <method name="SupportedProperties">
      <arg type="as" direction="out"/>
    </method>
    <method name="SupportedInterfaces">
      <arg type="as" direction="out"/>
    </method>
    <!--
     Toggle to next platform_profile. Names provided by `Profiles`.
     If fan-curves are supported will also activate a fan curve for profile.
     -->
    <method name="NextThrottleThermalPolicy">
    </method>
    <!--
     Get the `boot_sound` value from platform. Updates the stored value in
     internal config also.
     -->
    <property name="BootSound" type="b" access="readwrite"/>
    <property name="ChargeControlEndThreshold" type="y" access="readwrite"/>
    <property name="DgpuDisable" type="b" access="read"/>
    <property name="EgpuEnable" type="b" access="read"/>
    <property name="GpuMuxMode" type="y" access="readwrite"/>
    <!--
     Get the `panel_od` value from platform. Updates the stored value in
     internal config also.
     -->
    <property name="MiniLedMode" type="b" access="readwrite"/>
    <!--
     Set the dynamic boost limit of the Nvidia dGPU:
     * min=5, max=25
     -->
    <property name="NvDynamicBoost" type="y" access="readwrite"/>
    <!--
     Set the target temperature limit of the Nvidia dGPU:
     * min=75, max=87
     -->
    <property name="NvTempTarget" type="y" access="readwrite"/>
    <!--
     Get the `panel_od` value from platform. Updates the stored value in
     internal config also.
     -->
    <property name="PanelOd" type="b" access="readwrite"/>
    <!--
     Set the APU SPPT limit. Shown on full AMD systems only:
     * min=5, max=130
     -->
    <property name="PptApuSppt" type="y" access="readwrite"/>
    <!--
     Set the Fast Package Power Tracking Limit of CPU. AMD+Nvidia only:
     * min=5, max=250
     -->
    <property name="PptFppt" type="y" access="readwrite"/>
    <!--
     ***********************************************************************
     Set the Package Power Target total of CPU: PL1 on Intel, SPL on AMD.
     Shown on Intel+Nvidia or AMD+Nvidia based systems:
     * min=5, max=250
     -->
    <property name="PptPl1Spl" type="y" access="readwrite"/>
    <!--
     Set the Slow Package Power Tracking Limit of CPU: PL2 on Intel, SPPT,
     on AMD. Shown on Intel+Nvidia or AMD+Nvidia based systems:
     * min=5, max=250
     -->
    <property name="PptPl2Sppt" type="y" access="readwrite"/>
    <!--
     Set the platform SPPT limit. Shown on full AMD systems only:
     * min=5, max=130
     -->
    <property name="PptPlatformSppt" type="y" access="readwrite"/>
    <!--
     The energy_performance_preference for the balanced throttle/platform
     profile
     -->
    <property name="ThrottleBalancedEpp" type="u" access="readwrite"/>
    <!--
     The energy_performance_preference for the performance throttle/platform
     profile
     -->
    <property name="ThrottlePerformanceEpp" type="u" access="readwrite"/>
    <property name="ThrottlePolicyLinkedEpp" type="b" access="readwrite"/>
    <property name="ThrottlePolicyOnAc" type="u" access="readwrite"/>
    <property name="ThrottlePolicyOnBattery" type="u" access="readwrite"/>
    <!--
     The energy_performance_preference for the quiet throttle/platform
     profile
     -->
    <property name="ThrottleQuietEpp" type="u" access="readwrite"/>
    <property name="ThrottleThermalPolicy" type="u" access="readwrite"/>
  </interface>
  <interface name="org.asuslinux.Anime">
    <!--
     Writes a data stream of length. Will force system thread to exit until
     it is restarted
     -->
    <method name="Write">
      <arg name="input" type="(ays)" direction="in"/>
    </method>
    <!--
     The main loop is the base system set action if the user isn't running
     the user daemon
     -->
    <method name="RunMainLoop">
      <arg name="start" type="b" direction="in"/>
    </method>
    <!--
     Get the device state as stored by asusd
     -->
    <method name="DeviceState">
      <arg type="(bub(ssss)bbbu)" direction="out"/>
    </method>
    <!--
     Set base brightness level
     -->
    <!--
     Set base brightness level
     -->
    <property name="Brightness" type="u" access="readwrite"/>
    <!--
     Set which builtin animation is used for each stage
     -->
    <property name="BuiltinAnimations" type="(ssss)" access="readwrite"/>
    <!--
     Enable the builtin animations or not. This is quivalent to "Powersave
     animations" in Armory crate
     -->
    <property name="BuiltinsEnabled" type="b" access="readwrite"/>
    <!--
     Set whether the AniMe is enabled at all
     -->
    <property name="EnableDisplay" type="b" access="readwrite"/>
    <!--
     Set if to turn the AniMe Matrix off when the lid is closed
     -->
    <property name="OffWhenLidClosed" type="b" access="readwrite"/>
    <!--
     Set if to turn the AniMe Matrix off when the laptop is suspended
     -->
    <property name="OffWhenSuspended" type="b" access="readwrite"/>
    <!--
     Set if to turn the AniMe Matrix off when external power is unplugged
     -->
    <property name="OffWhenUnplugged" type="b" access="readwrite"/>
  </interface>
  <node name="19b6_4_4">
    <interface name="org.asuslinux.Aura">
      <!--
       Get the data set for every mode available
       -->
      <method name="AllModeData">
        <arg type="a{u(uu(yyy)(yyy)ss)}" direction="out"/>
      </method>
      <!--
       On machine that have some form of either per-key keyboard or per-zone
       this can be used to write custom effects over dbus. The input is a
       nested `Vec<Vec<8>>` where `Vec<u8>` is a raw USB packet
       -->
      <method name="DirectAddressingRaw">
        <arg name="data" type="aay" direction="in"/>
      </method>
      <!--
       Return the current LED brightness
       -->
      <!--
       Set the keyboard brightness level (0-3)
       -->
      <property name="Brightness" type="u" access="readwrite"/>
      <!--
       Return the device type for this Aura keyboard
       -->
      <property name="DeviceType" type="s" access="read"/>
      <!--
       The current mode data
       -->
      <!--
       Set an Aura effect if the effect mode or zone is supported.

       On success the aura config file is read to refresh cached values, then
       the effect is stored and config written to disk.
       -->
      <property name="LedMode" type="u" access="readwrite"/>
      <!--
       The current mode data
       -->
      <!--
       Set an Aura effect if the effect mode or zone is supported.

       On success the aura config file is read to refresh cached values, then
       the effect is stored and config written to disk.
       -->
      <property name="LedModeData" type="(uu(yyy)(yyy)ss)" access="readwrite"/>
      <!--
       Set a variety of states, input is array of enum.
       `enabled` sets if the sent array should be disabled or enabled

       For Modern ROG devices the "enabled" flag is ignored.
       -->
      <property name="LedPower" type="(auau((ubbbb)(ubbbb)(ubbbb)(ubbbb)(ubbbb)))" access="readwrite"/>
      <!--
       The total available modes
       -->
      <property name="SupportedBasicModes" type="au" access="read"/>
      <property name="SupportedBasicZones" type="au" access="read"/>
      <!--
       Total levels of brightness available
       -->
      <property name="SupportedBrightness" type="au" access="read"/>
      <property name="SupportedPowerZones" type="au" access="read"/>
    </interface>
    <interface name="org.freedesktop.DBus.Introspectable">
      <method name="Introspect">
        <arg type="s" direction="out"/>
      </method>
    </interface>
    <interface name="org.freedesktop.DBus.Properties">
      <method name="Get">
        <arg name="interface_name" type="s" direction="in"/>
        <arg name="property_name" type="s" direction="in"/>
        <arg type="v" direction="out"/>
      </method>
      <method name="Set">
        <arg name="interface_name" type="s" direction="in"/>
        <arg name="property_name" type="s" direction="in"/>
        <arg name="value" type="v" direction="in"/>
      </method>
      <method name="GetAll">
        <arg name="interface_name" type="s" direction="in"/>
        <arg type="a{sv}" direction="out"/>
      </method>
      <!--
       Emits the `org.freedesktop.DBus.Properties.PropertiesChanged` signal.
       -->
      <signal name="PropertiesChanged">
        <arg name="interface_name" type="s"/>
        <arg name="changed_properties" type="a{sv}"/>
        <arg name="invalidated_properties" type="as"/>
      </signal>
    </interface>
    <interface name="org.freedesktop.DBus.Peer">
      <method name="Ping">
      </method>
      <method name="GetMachineId">
        <arg type="s" direction="out"/>
      </method>
    </interface>
  </node>
</node>